BEAM MOVING HEAD LIGHT
SL-820
USER MANUAL
Guangzhou Yinhe Lighting&Sound Equipment Factory
USER MANUAL
Thanks for choosing our light. Please read the instruction carefully before
installation.
SAFETY DIRECTION:
1.Inspect the device carefully before installation in case of loose for transportantion.
2.Do not put the product on the shakable or moist place.
3.Please keep the voltage stable,otherwise the bulb would be broken easily.
4.Check the voltage before turning on lamp. While power down,it needs 15 minutes to
cool before reconnecting the power.
5.Disconnect the power before installation or removing.In case of malfunction,ask
professional technician to repair.(Check Fuse tube first).
6. Do not place lamps for a long time exposure in combustible to avoid fire.
TECHNICAL PARAMETER:
Voltage :110-240V, 50/ 60Hz
Power :350W
Lamp type： Philips MSD Platinum 5R
Bulb Power : 200W
Luminous flux of 7950lm, color temperature can reach 8000K
Inductance ballast and AC / DC switching power supply
Beautiful dot matrix display, a four switch, reverse 180 degrees.
The color wheel: a color wheel, each color plate consists of 14 color temperature film , a
white light
Gobo wheel: 17 pictorial effect, a white light effects
ffect wheel: a rotatable eight prism effect, mobile, atomizing function.
0 - 100% mechanical dimming, support mechanical strobe and adjustable speed
stroboscopic effect stroboscopic macro function,
Lens optical system, electric focus, beam angle of 0 to 4 degrees.
Using photoelectric reset system. automatically retrieving reset when accidental
misoperation
Channel :16CH
Horizontal 540 degree, resolution of 8Bit / 16Bi
The vertical resolution of 270 degree, 8Bit / 16Bit.
Overheat protection
protection grade: IP20
Net weight :19.5KG
Model：SL-820
200W Beam Moving Head Light
2
Item Channel DMX address Control content
1 X axis 0-255 0-270°
2 Y axis 0-255 0-450°
3 X Slight adjustment 0-255 0-1.0°
4 Y Slight adjustment 0-255 0-2.1°
5 X axis Y axis speed 0-255 fast - slow
adjustment
6 Atomization effect 0-255
7 Strobe 0-255 Light off
0-50 Light on
51-240 Flash slow-fast
241-255 Light on
8 Dimmer 0-255
9 Color Wheel 0-8 White
9-14 Color 1
15-25 Color 2
26-31 Color 3
32-39 Color 4
40-47 Color 5
48-55 Color 6
56-64 Color 7
65-72 Color 8
73-82 Color 9
83-87 Color 10
88-95 Color 11
96-103 Color 12
104-112 Color 13
113-129 Color 14
130-191 Rainbow effect clockwise rotation
fast-slow
191-255 Rainbow effect Anti-clockwise
rotation slow-fast
10 Color-chip fine 0-255
11 Gobo wheel 0-8 White
9-11 Gobo 1
12-22 Gobo 2
23-29 Gobo 3
30-37 Gobo 4
38-45 Gobo 5
46-51 Gobo 6
52-56 Gobo 7
57-62 Gobo 8
63-70 Gobo 9
71-77 Gobo 10
78-86 Gobo 11
3
87-90 Gobo 12
91-99 Gobo 13
100-109 Gobo 14
110-115 Gobo 15
116-121 Gobo 16
122-128 Gobo 17
129-190 Rainbow effect clockwise rotation
fast-slow
191-255 Rainbow effect Anti-Clockwise
rotation slow-fast
12 Gobo shake 0-255 Shake speed slow-fast
13 ZooM 0-255
14 Prism 0-31 No prism effect
32-127 Prism
128-191 Clockwise
192-255 counterclockwise
15 Prism rotation 0-255 Is reversing
16 remote 0-99 empty
control lamp 100-105 Controller close the lamp
106-199 empty
200-205 Controller open the lamp
206-253 empty
Reset 254-255 Reset delay
Display function setting：
1. Key instructions:
The "left" and "right" keys function the same way: return to the previous
interface
"Up" and "down" key: select and edit
"Determine" key (that is "OK" key) : execute function, begin edit, exit edit
MENU enters MENU selection
DOWN to the next option
UP to the previous option
ENTER to confirm the selected function
4
2、Setting function instruction:
Mode Functional Functional description
options
1.DMX address 1-512 Press the "Enter" to the edit state.
2. Encoder On Use encoder (Sensor) to judge out of step and
automatically correct position.
Off Do not use the encoder (Sensor) to correct the
position
3.X reversal On-off
System
4.Y reversal On-off
setting
5. no signal Keep Continue to run according to the original state
Zero Motor reset , stop running
clearing
6.Turn on light On Turn on the light，the bulb is off
Off Turn on the light，the bulb is off
7. ESC Back to previous menu
DMX Slave status: receive DMX signal from console or
1.Operation mode host.
Operation Master status: Auto run and send DMX signal to
Auto
mode slave.
Sound Receiving external sound or vibration, running
built-in program effect.
control
2.Channel mode 16CH NO.17 -20 Channel empty
3.ESC Back to previous menu
Reset Press“Enter”, After you see the confirmation
Manual dialog box, press the "Enter" again, go to the
reset interface, and reset all the motors.
control
Bulb control On-off
Color wheel 0-255 Press“Enter”, go to the edit state. At this
…… 0-255 time, select the button, press “up” and “down”
Gobo wheel speed 0-255 button to change the channel address, then press
the "enter" button to exit the edit state.
Chinese Press“Enter”，to Chinese language.
1.Language
EN Press“Enter”， to English language.
Display
2. Reverse On-Off Press“Enter”, 180 degree reverse display
setting
3. Screensaver On Turn off the backlight after 40 seconds
Off Backlight always on
4.Back Back to previous menu
Back Back to main menu （Display the address of the
current settings）
