60W Single Output Switching Power Supply S-60 series

Features :
Universal AC input/Full range
Protections:Short circuit/Over load/Over voltage
Cooling by free air convection
100% full load burn-in test
Fixed switching frequency at 50KHz
2 years warranty

SPECIFICATION
MODEL S-60-5 S-60-12 S-60-15 S-60-24
DC VOLTAGE 5V 12V 15V 24V
RATED CURRENT 12A 5A 4A 2.5A
CURRENT RANGE 0 ~ 12A 0 ~ 5A 0 ~ 4A 0 ~ 2.5A
RATED POWER 60W 60W 60W 60W
RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p 150mVp-p 150mVp-p
OUTPUT
VOLTAGE ADJ. RANGE 4.75 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V 21.6 ~ 26.4V
VOLTAGE TOLERANCE Note.3 2.0% 1.0% 1.0% 1.0%
LINE REGULATION 0.5% 0.5% 0.5% 0.5%
LOAD REGULATION 1.0% 0.5% 0.5% 0.5%
SETUP, RISE, HOLD TIME 300ms, 50ms, 80ms / 230VAC 800ms, 50ms, 10ms / 115VAC at full load
VOLTAGE RANGE 85 ~ 264VAC 120 ~ 370VDC
FREQUENCY RANGE 47 ~ 63Hz
EFFICIENCY(Typ.) 73% 76% 77% 79%
INPUT
AC CURRENT 2A/115VAC 1A/230VAC
INRUSH CURRENT(max.) COLD START 30A/115VAC 60A/230VAC
LEAKAGE CURRENT <3.5mA / 240VAC
105 ~ 150% rated output power
OVER LOAD
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
PROTECTION
5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25 27.6 ~ 32.4V
OVER VOLTAGE
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
WORKING TEMP. -10 ~ +60 (Refer to output load derating curve)
WORKING HUMIDITY 20 ~ 90% RH non-condensing
ENVIRONMENT STORAGE TEMP., HUMIDITY -20 ~ +85 , 10 ~ 95% RH
TEMP. COEFFICIENT 0.03%/ (0 ~ 50 )
VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes
SAFETY STANDARDS UL1012, UL1950, TUV EN60950 Approved
WITHSTAND VOLTAGE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
(Note 4) HARMONIC CURRENT Compliance to EN61000-3-2,-3
EMS IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF 316.2K hrs min. MIL-HDBK-217F (25 )
OTHERS DIMENSION 159*97*38mm (L*W*H)
PACKING 0.51Kg; 24pcs/13.1Kg/0.7CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
NOTE
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.

File Name:S-60-SPEC 2004-06-30

 60W Single Output Switching Power Supply S-60 series

Mechanical Specification Case No. 901 Unit:mm

152.5

7
3.5
1

2
9.5

65
3

84.5
97
8.2

5
3
2 -M

3 .5

4.5
24 78
159

6.5 150
9

9
18.5

3.5
3-
3 .5

38
M3
18

28.5

22 117

Terminal Pin. No Assignment

Pin No. Assignment Pin No. Assignment
1 AC/L 4 DC OUTPUT -V
2 AC/N 5 DC OUTPUT +V
3 FG

Output Derating Static Characteristics (24V)

Ta=25
Vo
32 350
100
OUTPUT RIPPLE (mVp-p)

28 300
OUTPUT VOLTAGE (V)

80
24 250

60 20 200
LOAD (%)

16 150
40
12 100
20
8 50

-10 0 10 20 30 40 50 60 (VERTICAL) 60 80 100 120 140 160 180 200 220 240 260
-10 0 45 55 (HORIZONTAL)

AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz

File Name:S-60-SPEC 2004-06-30