Scribd
Upload
14 views1 page

Mode

Mode 56 checks the software on the main CPU. Mode 24 sets single or dual house CNG dispensers by selecting position 2 for single or 4 for dual. Mode 60 allows viewing of the CNG50 Mode bus counter value on the LCD mass display.

Uploaded by

ferozahmedkhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
14 views1 page

Mode

Mode 56 checks the software on the main CPU. Mode 24 sets single or dual house CNG dispensers by selecting position 2 for single or 4 for dual. Mode 60 allows viewing of the CNG50 Mode bus counter value on the LCD mass display.

Uploaded by

ferozahmedkhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

Mode Function Programming

56 check what software is on the main CPU press Mode 56 press ENTER
Select side 1
24 sets a single or dual house CNG dispenser . Position press Mode 24 press ENTER
(2) single .(4) dual. Select side 1
Cilant id 2
position (2) single
position (4) dual
Select side 1 (universal dose 1 and 2 set up )
allows CNG50 Mode bus counter, returns value on
60 mass press Mode 60 press ENTER
LCD display xxxx 02 Select side 1
78 counter delay -after "off button is pressed press mode 78 press ENTER
Select side 1 universal for the both side
ENTER 06 (equal to 3 second
return on the mass LCD display is 2 if it returns a value of
1(off)
redo and it will return 2 on
40 price change press mode 40 press ENTER
select individual side 1 for house 1 and 2 for house 2
in put using the keypad the new price
NOTE:TO SEE INVENTORY TOTALS FROM BOTH
DISPENSERS AT ONCE PRESS THE S KEY ON THE
KEY
PAD TO SEE THE TOTA LIZER READING
67 Press mode 67 press ENTER
Select side 1
press "S" twice on the key pad
63 zero micro motion meter for flow rate press mode 63 press enter
select side 1
press enter (wait 20 second from meter to zero down
5 setting decimal price
52 for diagnostics when done using the mode
Alpha display you make save to turn it OFF
BRIGHTNESS OF ALPHA DISPLAY DEL -
ESC +
Press mode 82 press enter
82 To turn on the alpha numeric keypad option Select said 1(universal for the both said )
Press mode 82 press enter
76 Dual alpha numeric display option Select said 1(universal for the both said )
79 Code entry for locking access of made
Display show PLUSE DISCONNET Enter code 6372
Kakakhel dispenser pass word 4952
27 Brust again brust Press mode 27 select side 1 (0.001)

You might also like