Scribd
Upload
65 views1 page

IDT Dollies

The document describes a 400mm long 35mm bolt with dimensions shown in a front elevation view, top view of the screw end, and additional views. The bolt has a 280mm long threaded section in the middle with 100mm unthreaded sections on both ends, and other precise dimensions are provided.

Uploaded by

james
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
65 views1 page

IDT Dollies

The document describes a 400mm long 35mm bolt with dimensions shown in a front elevation view, top view of the screw end, and additional views. The bolt has a 280mm long threaded section in the middle with 100mm unthreaded sections on both ends, and other precise dimensions are provided.

Uploaded by

james
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

35mm bolt 400mm long

400
280 280 100

50
100
FRONT ELEVATION 20

200

250
TOP VIEW
OF THE SCREW END
50
250

45

70
Ø 200

210 100

35

Description: The dolly is made from 100mmX50mm C channels cut to length. The April Drawn by Eienst
bottom part that is bolted to the gantry is from a channel that has been split to 2017 TMM Biosolutions
the dimmensions shown. Dimmensional accuracy is pramount.

You might also like