Data sheet 6ES7134-6GF00-0AA1

SIMATIC ET 200SP, Analog input module, AI 8XI 2-/4-wire Basic,

suitable for BU type A0, A1, Color code CC01, Module diagnostics,
16 bit

General information
Product type designation AI 8xI 2-/4-wire BA
HW functional status from FS04
Firmware version
● FW update possible Yes
usable BaseUnits BU type A0, A1
Color code for module-specific color identification CC01
plate
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Measuring range scalable No
Engineering with
● STEP 7 TIA Portal configurable/integrated as of V13 SP1
version
● STEP 7 configurable/integrated as of version V5.5 SP3 / -
● PROFIBUS as of GSD version/GSD revision GSD Revision 5
● PROFINET as of GSD version/GSD revision GSDML V2.3
Operating mode

6ES7134-6GF00-0AA1 Subject to change without notice

Page 1/4 05/21/2020 © Copyright Siemens
 ● Oversampling No
● MSI No

CiR – Configuration in RUN

Reparameterization possible in RUN Yes
Calibration possible in RUN No

Supply voltage
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Reverse polarity protection Yes

Input current
Current consumption, max. 25 mA; without sensor supply

Encoder supply
24 V encoder supply
● 24 V Yes
● Short-circuit protection Yes
● Output current, max. 0.7 A; total current of all encoders/channels

Power loss
Power loss, typ. 0.7 W; Without encoder supply voltage

Address area
Address space per module
● Address space per module, max. 16 byte

Hardware configuration
Automatic encoding
● Mechanical coding element Yes
Selection of BaseUnit for connection variants
● 1-wire connection BU type A0, A1
● 2-wire connection BU type A0, A1
● 4-wire connection BU type A0, A1 + potential distributor module

Analog inputs
Number of analog inputs 8; Single-ended
● For current measurement 8
permissible input current for current input (destruction 50 mA
limit), max.
Cycle time (all channels), min. 1 ms; per channel
Input ranges (rated values), currents
● 0 to 20 mA Yes
— Input resistance (0 to 20 mA) 100 Ω; 15 bit
● -20 mA to +20 mA Yes

6ES7134-6GF00-0AA1 Subject to change without notice

Page 2/4 05/21/2020 © Copyright Siemens
 — Input resistance (-20 mA to +20 mA) 100 Ω; 16 bit incl. sign
● 4 mA to 20 mA Yes
— Input resistance (4 mA to 20 mA) 100 Ω; 15 bit
Cable length
● shielded, max. 200 m

Analog value generation for the inputs

Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), 16 bit
max.
● Integration time, parameterizable Yes
● Interference voltage suppression for 16.67 / 50 / 60 / 4 800 (16.67 / 50 / 60)
interference frequency f1 in Hz
● Conversion time (per channel) 180 / 60 / 50 / 0.625 (67.5 / 22.5 / 18.75) ms
Smoothing of measured values
● Number of smoothing levels 4; None; 4/8/16 times
● parameterizable Yes

Encoder
Connection of signal encoders
● for voltage measurement No
● for current measurement as 2-wire transducer Yes
— Burden of 2-wire transmitter, max. 650 Ω
● for current measurement as 4-wire transducer Yes

Errors/accuracies
Linearity error (relative to input range), (+/-) 0.01 %
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min. 50 dB
Repeat accuracy in steady state at 25 °C (relative to 0.05 %
input range), (+/-)
Operational error limit in overall temperature range
● Current, relative to input range, (+/-) 0.5 %
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-) 0.3 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of 70 dB; With conversion time 67.5 / 22.5 / 18.75 ms: 40 dB
interference < rated value of input range), min.

Interrupts/diagnostics/status information
Diagnostics function Yes
Alarms
● Diagnostic alarm Yes
● Limit value alarm No
Diagnostic messages

6ES7134-6GF00-0AA1 Subject to change without notice

Page 3/4 05/21/2020 © Copyright Siemens
 ● Monitoring the supply voltage Yes
● Wire-break Yes; at 4 to 20 mA
● Short-circuit Yes; Sensor supply to M; module by module
● Group error Yes
● Overflow/underflow Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED) Yes; green LED
● Channel status display Yes; green LED
● for channel diagnostics No
● for module diagnostics Yes; green/red DIAG LED

Potential separation
Potential separation channels
● between the channels No
● between the channels and backplane bus Yes
● between the channels and the power supply of No
the electronics

Isolation
Isolation tested with 707 V DC (type test)

Ambient conditions
Ambient temperature during operation
● horizontal installation, min. -30 °C
● horizontal installation, max. 60 °C
● vertical installation, min. -30 °C
● vertical installation, max. 50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max. 5 000 m; Restrictions for installation altitudes > 2 000 m, see
manual

Dimensions
Width 15 mm
Height 73 mm
Depth 58 mm

Weights
Weight, approx. 31 g

last modified: 05/09/2020

6ES7134-6GF00-0AA1 Subject to change without notice

Page 4/4 05/21/2020 © Copyright Siemens