Scribd
Upload
70 views1 page

PQ200 in

The BGI PQ200 is a portable particulate air sampler designated by the EPA as a reference method sampler for PM10, PM2.5, and PM10-2.5. It can run for 24 hours on an internal battery and stores up to seven 24-hour sampling runs. It samples particle sizes from PM1 to TSP and has automatic multi-point flow calibration. Temperature, pressure, and flow rate are accurately measured and calibrated through an easy-to-navigate menu. Data is output through USB, RS232, and diagnostic logs can trace sampling conditions.

Uploaded by

Jeimmy Lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views1 page

PQ200 in

The BGI PQ200 is a portable particulate air sampler designated by the EPA as a reference method sampler for PM10, PM2.5, and PM10-2.5. It can run for 24 hours on an internal battery and stores up to seven 24-hour sampling runs. It samples particle sizes from PM1 to TSP and has automatic multi-point flow calibration. Temperature, pressure, and flow rate are accurately measured and calibrated through an easy-to-navigate menu. Data is output through USB, RS232, and diagnostic logs can trace sampling conditions.

Uploaded by

Jeimmy Lopez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BGI PQ200

US EPA FRM for PM10, PM2.5, and PM10-2.5

The BGI PQ200 portable FRM sampler is the only EPA designated reference sampler capable of a
24 hour run on internal built-in 12 volt battery. The PQ200 features easy to navigate menu structure
and memory capacity which allows the user to store up to seven 24-hour runs with defined start/
stop times. Whether sampling TSP, PM10, PM2.5, or PM1, the PQ200 makes ambient particulate air
sampling a breeze.

General
» Particle Size: PM10, PM2.5, PM1, TSP
» Flow Range: 10-20 LPM
» Sampling Interval: 24-Hour Sampling

Flow Control
» Pump: Dual Diaphragm Vacuum Pump
» Flow Rate Measurement Accuracy: ±2%
» Automatic, multi-point flow calibration using the deltaCal calibrator

Environmental
» Operating Temperature: -30 to 50 °C US EPA Designation:
EPA RFPS-1298-125 FRM for PM10
» Ambient/Filter Temperature Sensor Resolution: 0.1 °C
EPA RFPS-0498-116 FRM for PM2.5
» Temperature Sensors Accuracy: ±0.16 °C EPA RFPS-1208-173 FRM for PM10-2.5

» Barometric Pressure Sensor: 545 to 800 mmHg


» Easily calibrate temperature/pressure through simple-to-navigate menu
PQ200 Ordering Information
Part # PQVSCC: PM2.5 FRM Fine
Electrical and Communication Particulate Sampler, with PM2.5 VSCC,
120/240 Volt. English/Spanish version
» Internal Battery: 12V 18Ah available
» Optional: Solar Part # PQ200PM10: PM10 FRM Fine
» Data Output: RS232 & USB Connection Particulate Sampler, 120/240 Volt.
English/Spanish version available
» Interface: Push-button
Part # PQ200TSP: Particulate sampler
» Language Options: English, Spanish with TSP inlet head. 120/240 volt.
English/Spanish version available.
» USB connectivity for easier data download via portable flash drive
» Ability to upgrade firmware automatically via flash drive Part # VSCCB: PM2.5 Cyclone to convert
PQ200 from a PM10 Sampler to PM2.5
» Diagnostic log file to retrace conditions FRM

10 Park Place • Butler, NJ USA 07405 • mesalabs.com


ph: +1.973.492.8400 • ph: 800.663.4977 • fx: 303.484.4992

You might also like