ROUTER LIGHT

INDICATION
TP-Link Archer C1200

1 2 3 4 5 6 7

NO NAME STATUS INDICATION

On System initialization completes.

Flashing
1 Power the router.

2 Wireless (2.4 GHz LED) On The 2.4 GHz wireless band is working properly.

The 2.4 GHz wireless band is disabled.

3 Wireless (5GHz LED) On The 5 GHz wireless band is working properly.

The 5 GHz wireless band is disabled.

4 Ethernet 1-4 On At least one Ethernet port is connected.

No Ethernet port is connected.

5 Internet Green On Internet is available.

Orange On The router’s internet port is connected, but the internet is not available.

The router’s internet port is not connected.

6 WPS

Flashing A wireless device is trying to connect to the network via WPS. This process may take up
to 2 minutes.
7 USB On A USB device is connected to the corresponding USB port.

Flashing A USB device is connecting to the corresponding USB port.

No USB device is corresponding USB port.

D-Link DIR-882

1 2 3 4 5 6 7

NO NAME INDICATION
1 Power LED A solid light indicates a proper connection to the power supply. The light will be solid orange during boot up

2 Internet LED A solid indicates a connection on the internet port. If the LED is orange, the router cannot connect to
the internet.

3 Wireless (2.4 GHz LED) A solid light that the 2.4GHz wireless band is enabled.

4 Wireless (5GHz LED) A solid light that the 5GHz wireless band is enabled.

5 Super Speed USB LED A solid green light indicates a USB storage device is connected to the USB 3.0 port on the front of the router.

6 USB LED A solid green light indicates a USB storage device is connected to the USB 2.0 port on the back of the router.
TP-Link EC230

1 2 3 4 5 6

NO NAME STATUS INDICATION

On The system has started up successfully.

Flashing The system is starting up or the firmware is being upgraded. Do not disconnect or
1 Power
power off your router.

2 Wireless (2.4 GHz) On The 2.4GHz wireless band is enabled.

The 2.4GHz wireless band is disabled.

3 Wireless (5GHz) On The 5GHz wireless band is enabled.

The 5GHz wireless band is disabled.

4 Ethernet On At least one Ethernet port is connected to a powered-on device.

No powered-on device is connrected to the router’s corresponding Ethernet port.

5 Internet Green On Internet is available.

Orange On The router’s internet port is connected, but the internet service is not available.

The router’s internet port is unplugged.

6 WPS This light remains on for 5 minutes when a WPS connection is established, then turns
off.
Flashing WPS connection is in progress. This may take up to 2 minutes.
TP-Link EC440

7
6
5
4
3
2
LED on/off
1

NO NAME STATUS INDICATION

1 Power On The system has started up successfully.

Flashing The system is starting up or the router is updating the firmware. Do not disconnect or
power off your router.
Off Power is off.

2 2.4 GHz Wireless On The 2.4 GHz wireless band is enabled.

Off The 2.4 GHz wireless band is disabled.

3 5GHz Wireless On The 5 GHz wireless band is enabled.

Off The 5 GHz wireless band is disabled.

4 Internet On Internet service is available.

Orange On The router’s Internet port is connected, but the Internet service is unavailable.

Off The router’s Internet port is unplugged.

5 Ethernet On At least one powered-on device is connected to the router’s LAN port.

Off No powered-on device is connected to the router’s LAN port.

6 WPS On/Off Turns on when a WPS or sync connection is established and automatically turns off
about 5 minutes later.
Flashing A WPS or sync connection is in progress. This may take up to 2 minutes.

7 USB On The USB device is ready to use.

Flashing A new USB device is being identified.

Off No USB device is plugged into the USB port.

TP-Link HC420
Front Panel

NO NAME STATUS INDICATION

1 Status Flashing Green The device is starting or updating the firmware.

Solid Green The device is ready, and the internet is unavailable.

Solid Orange The device is ready but the internet is unavailable.

Off Power is off.

2 Wireless Flashing Green The wireless function is enabled, and the device is in the factory default state.

Solid Green The device has connected with the router, and the signal is strong.

Solid Orange The device has connected with the router, but the signal is weak.

Off The device has lost connection with the router.

3 Sync/WPS Flashing Green A wireless device is trying to connect to the network via WPS. This process may take
up to 2 minutes.
Solid Green The device is trying to connect to the router via synchronization. This process may take
up to 2 minutes.
Off No WPS/Sync connection in process or the WPS/Sync process has completed.
Huawei HG8145V5

1 2 3 4 5 6 7

NO NAME STATUS INDICATION

1 Power Steady on The ONT is powered on.
Off The power supply is cut off.

2 PON/LOS See the following table.

3 LAN1-LAN4 Steady on The Ethernet connection is in the normal state.
Blinking Data is being transmitted over the Ethernet port.
Off The Ethernet connection is not set up.
4 TEL Steady on The ONT is registered with the softswitch but no service flows are transmitted.
Blinks twice a second The ONT is registered with the softswitch, and the data is being transmitted on the port.
Blinks once every The ONT fails to be registered with the softswitch.
2 seconds
Off The POTS port is disabled.
5 USB Steady on The USB port is connected and working in the host mode, but no data is
being transmitted.
Blinking Data is being transmitted on the USB port.
Off The system is not powered on or the USB port is not connected.
6 WLAN Steady on The WLAN function is enabled.
Blinking Data is being transmitted on the USB port.
Off The system is not powered on or the USB port is not connected.
7 WPS Steady on The WPS function is enabled
Blinking A Wi-Fi terminal is accessing the system.
Off The WPS function is disabled.

NO PON STATUS LOS STATUS INDICATION

1 Off Off The ONT is prohibited by the upper-layer device or blinks abnormally. Contact the
service provider for help.

2 Blinks twice a second Blinks twice a second

3 Blinks twice a second Off The ONT attempts to set up a connection with its upper-layer device.

4 Steady on Off A connection is set up between the ONT and its upper-layer device.

5 Off Blinks once every The ONT is not connected to fibers or does not receive optical signals.
2 seconds
6 Blinks once every Blinks once every The hardware is faulty.
2 seconds 2 seconds
Huawei WA8021V5

Indicator
Pairing button

STATUS INDICATION
White: steady on Internet access is available.

Internet access is unavailable.

Red: steady on
1. The edge ONT is being powered on.
2. The edge ONT is not connected to the upstream gateway.

Red: Blinking slowly The edge ONT has detected a device that can be paired.
(once per second)
Wireless The edge ONT is being paired with Huawei gateway in one-click mode.

The edge ONT is performing WPS pairing.