Pump Performance Datasheet
Customer : Quote number : 1622934
Customer reference : Size and model : 14x16x23 PWD
Item number : Default Stages :1
Service : Based on curve number : 14x16x23PWD
Quantity :1 Date last saved : 20 Mar 2024 11:59 AM
Operating Conditions Liquid
Flow, rated : 540.0 l/s Liquid type : Hydrocarbon
Head, rated (requested) : 144.0 m Additional liquid description :
Head, rated (actual) : 144.8 m Solids diameter, max : 0.00 in
Suction pressure, rated / max : 0.00 / 0.00 psi.g Solids concentration, by volume : 0.00 %
NPSH available : Ample Temperature : 68.00 deg F
Site Supply Frequency : 60 Hz Fluid density : 1.000 / 1.000 SG
Performance Viscosity : 1.00 cP
Speed criteria : Synchronous Vapor pressure, rated : 0.00 psi.a
Speed : 1760 rpm Material
Impeller dia. : 23.00 in Material selected : S-4 (Carbon Steel / Carbon
Impeller diameter, maximum : 23.50 in Steel)
Impeller diameter, minimum : 18.75 in Pressure Data
Efficiency : 83.65 % Maximum working pressure : 242.8 psi.g
NPSH required / margin required : 25.07 / 0.00 ft Maximum allowable working pressure : 1,480.0 psi.g
Ns (imp. eye flow) / Nss (imp. eye flow) : 1,023 / 10,495 US Units Maximum allowable suction pressure : N/A
MCSF : 183.6 l/s Hydrostatic test pressure : 2,220.0 psi.g
Head max. : 170.9 m Driver & Power Data (@Max density)
Head rise to shutoff : 18.71 % Driver sizing specification : API 610 / ISO 13709
Flow, best eff. point : 490.3 l/s Margin over specification : 0.00 %
Flow ratio, rated / BEP : 110.14 % Service factor : 1.00
Diameter ratio (rated / max) : 97.87 % Power, hydraulic : 1,021 hp
Head ratio (rated dia / max dia) : 93.89 % Power, rated : 1,221 hp
Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1.00 / 1.00 / 1.00 / 1.00 Power, maximum : 1,399 hp
Selection status : Acceptable Motor rating : 1,500 hp / 1,119 kW
Pumpworks Standard Clearances
Mechanical Seal horsepower consumption is not calculated nor included in the Power, rated.
200
23.50 in 62 70 MCSF
180 77 81
84
160 84
23.00 in 81
140 77
Head - m
120
100
18.75 in
80
60
40
20
0
NPSHr - ft
40 NPSHr
20
0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750
Flow - l/s
Pump Performance Curve
200
MCSF
23.50 in 62
180 70 77 81
84
160 23.00 in 84
81
140
77
120
Head - m
100 18.75 in
80
60
40
20
40
NPSHr
NPSHr - ft
20
0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750
Flow - l/s
Pumpworks Standard Clearances
Mechanical Seal horsepower consumption is not calculated nor included in the Power, rated.
Customer : Size and model : 14x16x23 PWD Flow, rated : 540.0 l/s
Customer reference : Stages :1 Head, rated : 144.0 m
Item number : Default Speed : 1760 rpm Fluid density : 1.000 / 1.000 SG
Service : Based on curve number : 14x16x23PWD Viscosity : 1.00 cP
Quantity :1 Efficiency : 83.65 % Cq/Ch/Ce/Cn [ANSI/HI 9.6.7-2010] : 1.00 / 1.00 / 1.00 / 1.00
Quote number : 1622934 Power, rated : 1,221 hp Solids size limit : 1.00 in
Date last saved : 20 Mar 2024 11:59 AM NPSH required : 25.07 ft
Internal Price Sheet
Customer Size and model / Stages 14x16x23 PWD / 1
Item number Default Pump speed 1760 rpm
Customer reference Quote number
Service Date last saved 20 Mar 2024 11:59 AM
Totals
Grand Total - Lead Time Total 32 Weeks
Reseller Total Cost - Reseller Margin Used 0%
Pump Total -
Pump
Qty Description Part Number Reseller Reseller Standard Exch Customer
Margin Cost, each Sell Price
14x16x23 PWD 1 Stage - -
1 Material Class: Material Class S-4 Modified - - - -
1 One-Time Pattern and R&D Fee - - - -
Flange Rating: 600# ANSI RF - -
Case Material: ASTM A216 Gr. WCB - -
1 Impeller Material: ASTM A351 Gr. CF3M - -
Stationary Wear Parts: ASTM A48 Class 40 - -
1 Rotating Wear Parts: ASTM A 479 Type 316L / #6 HF - -
Shaft Material: ASTM A479 Type 410HT - -
Bolting Material: ASTM A193 Gr. B7 - -
Drain Connection: 3/4'' 600# Integral Flange - -
Drain Piping: SW 3/4'' 600# RF, SCH 160 Piped to Skid - -
Edge
Drain Piping Material: Same as casing - -
Vent Connection: 3/4'' 600# Integral Flange - -
Vent Piping: SW 3/4'' 600# RF, SCH 160 - -
Vent Piping Material: Same as casing - -
Bearings: Sleeve / Ball - -
Bearing Lubrication: Ring Oil Lube - -
Bearing Housing Sealing: Isomag MP-V7 Bearing Isolator - -
1 Housing Cooling: Fan Cooled - - - -
Seal Type: Single - -
2 Seal: John Crane Single 48LP - - - -
Alert: Mechanical seal pricing is for budgetary - -
purposes only. A valid seal quote must be obtained
and submitted with an order.
Freight
1 Mechanical Seal Freight Charge - - - -
Primary Seal Flush Plan: Plan 11 - -
2 Primary Seal Flush Piping Material: 316 SS Tubing, with - - - -
316 SS Compression Fittings
Freight
1 Primary Seal Flush Plan Freight Charge - - - -
Secondary Seal Flush Plan: None - -
Cooling Water Piping Plan: None - -
Driver Type: Motor - -
Driver Supplied By: Pump Manufacturer - -
Driver Mounted By: Pump Manufacturer - -
Alert: Motor pricing is for budgetary purposes only. - -
Due to price volatility, a valid motor quote must be
obtained and submitted with an order.
1 Special Driver: Specify Special Driver - -
PumpWorks ePOD Quotation System 23.4.1
Pump
Qty Description Part Number Reseller Reseller Standard Exch Customer
Margin Cost, each Sell Price
Freight
1 Motor Freight Charge - - - -
1 Baseplate Elements: Two Elements (Pump and Driver) - - - -
Standard Baseplate Features
All joints continuously seal-welded to prevent crevice - -
corrosion
Vertical leveling screws at each anchor bolt location - -
Removable transverse and axial motor positioning - -
screws
2" radius on each corner - -
Base intended for use with grout - will have grout holes - -
and vent holes per API 610
Prepared underside for epoxy grout - -
Baseplate Grout Hole Covers
1 Grout Hole Covers - - - -
Manufacturer: Thomas - -
Design: Flexible Disc - -
Spacer Length: 8.00" inch - -
Service Factor: 1.5 - -
Drive Method: Key Drive - Pump Hub - -
1 Coupling: Thomas XTSR71 1698 - - - -
Freight
1 Coupling Freight Charge - - - -
Shaft Design: Tapered Shaft Extension - -
1 Coupling Guard: PW610 Standard Aluminum Coupling - - - -
Guard
Will this pump be driven by a variable speed driver?: No - -
Casting NDE: API 610 12th Ed Level I Per Table 14/15 - -
Performance Test: Certified Performance - Non-Witnessed - -
NPSH Test: None - -
Other Testing Options
Casing Hydrostatic Test with Report - -
Material Test Reports (6.12.1.8)
Casing - -
Impeller - -
Shaft - -
Wear Parts - -
Equipment to be Painted: Pump and Baseplate - -
1 Paint Specification: PW Std. Preparation and Painting - - - -
Paint Specification: Onshore - -
Packaging: Domestic (Soft) - -
Packed Items: Pump, Baseplate and Driver - -
Preservation: Std. Preparation Pump, Driver and - -
Baseplate
1 Engineering & Assembly Hours (100) - - - -
Build: No - -
Mfg Source: USA Mfg - -
Total Lead Time: 32 Weeks - -
Optional Adders
Qty Description Part Number Reseller Reseller Standard Exch Customer
Margin Cost, each Sell Price
1 Roll of Gasket Material - - - -
Optional Adders
Qty Description Part Number Reseller Reseller Standard Exch Customer
Margin Cost, each Sell Price
2 Complete Mechanical Seal - - - -
Includes 5.7% Handling Fee, and 1.5% Shipping - -
Fee.
1 Rotating Assembly - - - -
2 Radial Bearing (Each) - - - -
1 Thrust Bearing (Set) - - - -
1 Brg Isolator (Set) - - - -
1 Slinger Ring (Set) - - - -
1 O-ring, End Cover (Set) - - - -
1 Shim Set, End Cover (Set) - - - -
1 Bearing Lock Nut - - - -
1 Bearing Band - - - -
Note
The above pricing for spares is a project specific - -
discounted cost and is only valid when purchased
during the original order execution.
Special promotion: Free Gasket with purchase of - -
Sleeve Bearing set.
- -
Optional Adders
1 Predict-Plus Wireless Condition Monitor for trending - - - -
pump health and generating proactive vibration
and temperature alerts. Includes 3 years of Cloud
Monitoring via web browser and/or mobile app. Class
1 Division 1 Group D certified. Cellular device-to-cloud
connection and powered by field replaceable batteries.
Identifier Codes
Assembly Qty Code
Complete Pump 1 0101B2CN3AE.R06????S4
Pump Case 1 CASE ASSY 14x16x23 PWD 1 R06 1000
Case Casting 1 CASE CAST 14x16x23 PWD 1 1000
Rotor 1 ROTOR 14x16x23 PWD 1 B ?? CW ?? S4
Shaft 1 SHAFT 14x16x23 PWD 1 B ?? CW ?? A
Customer Price Sheet
Customer Size and model / Stages 14x16x23 PWD / 1
Item number Default Pump speed 1760 rpm
Customer reference Quote number
Date 20 Mar 2024 11:59 AM
Totals
Grand Total - Lead Time Total 32 Weeks
Pump Total -
Pump
Qty Description Average Unit Price Extended Price
1 14x16x23 PWD 1 Stage - -
NEW PumpWorks610 Model PWD
Between Bearing Axially Split Single Stage Pump
API610 Configuration BB1
NOTE: PW610 Model PWD is Fully Compliant with API 610 12th
Edition.
Pump
Materials
Material Class: Material Class S-4 Modified
Flange Rating: 600# ANSI RF
Case Material: ASTM A216 Gr. WCB
Impeller Material: ASTM A351 Gr. CF3M
Stationary Wear Parts: ASTM A48 Class 40
Rotating Wear Parts: ASTM A 479 Type 316L / #6 HF
Shaft Material: ASTM A479 Type 410HT
Bolting Material: ASTM A193 Gr. B7
Drain & Vent Piping
Drain Connection: 3/4'' 600# Integral Flange
Drain Piping: SW 3/4'' 600# RF, SCH 160 Piped to Skid Edge
Drain Piping Material: Same as casing
Vent Connection: 3/4'' 600# Integral Flange
Vent Piping: SW 3/4'' 600# RF, SCH 160
Vent Piping Material: Same as casing
Bearings
Bearings: Sleeve / Ball
Bearing Lubrication: Ring Oil Lube
Bearing Housing Sealing: Isomag MP-V7 Bearing Isolator
Housing Cooling: Fan Cooled
Mechanical Seal
Seal Type: Single
Seal: John Crane Single 48LP
Alert: Mechanical seal pricing is for budgetary purposes only. A valid seal
quote must be obtained and submitted with an order.
Seal Flush Plan - Primary
Primary Seal Flush Plan: Plan 11
Primary Seal Flush Piping Material: 316 SS Tubing, with 316 SS
Compression Fittings
Seal Flush Plan - Secondary
Secondary Seal Flush Plan: None
Cooling Water Piping
Cooling Water Piping Plan: None
Driver
Driver Type: Motor
Driver Supplied By: Pump Manufacturer
Driver Mounted By: Pump Manufacturer
Pump
Qty Description Average Unit Price Extended Price
Alert: Motor pricing is for budgetary purposes only. Due to price volatility,
a valid motor quote must be obtained and submitted with an order.
Special Driver: Specify Special Driver
Baseplate
Baseplate Elements: Two Elements (Pump and Driver)
Standard Baseplate Features
All joints continuously seal-welded to prevent crevice corrosion
Vertical leveling screws at each anchor bolt location
Removable transverse and axial motor positioning screws
2" radius on each corner
Base intended for use with grout - will have grout holes and vent holes
per API 610
Prepared underside for epoxy grout
Baseplate Grout Hole Covers
Grout Hole Covers
Coupling
Manufacturer: Thomas
Design: Flexible Disc
Spacer Length: 8.00" inch
Service Factor: 1.5
Drive Method: Key Drive - Pump Hub
Coupling: Thomas XTSR71 1698
Shaft Design: Tapered Shaft Extension
Coupling Guard: PW610 Standard Aluminum Coupling Guard
Testing
Critical Speed Analysis
Will this pump be driven by a variable speed driver?: No
Casting NDE: API 610 12th Ed Level I Per Table 14/15
Performance Test: Certified Performance - Non-Witnessed
NPSH Test: None
Other Testing Options
Casing Hydrostatic Test with Report
Material Test Reports (6.12.1.8)
Casing
Impeller
Shaft
Wear Parts
Preparation and Painting
Equipment to be Painted: Pump and Baseplate
Paint Specification: PW Std. Preparation and Painting
Paint Specification: Onshore
Packed Items
Packaging: Domestic (Soft)
Packed Items: Pump, Baseplate and Driver
Preservation: Std. Preparation Pump, Driver and Baseplate
Lead Time
Build: No
Mfg Source: USA Mfg
Total Lead Time: 32 Weeks
Optional Adders
Qty Description Unit Price Extended Price
1 Roll of Gasket Material - -
2 Complete Mechanical Seal - -
Optional Adders
Qty Description Unit Price Extended Price
1 Rotating Assembly - -
2 Radial Bearing (Each) - -
1 Thrust Bearing (Set) - -
1 Brg Isolator (Set) - -
1 Slinger Ring (Set) - -
1 O-ring, End Cover (Set) - -
1 Shim Set, End Cover (Set) - -
1 Bearing Lock Nut - -
1 Bearing Band - -
Note
The above pricing for spares is a project specific discounted cost and is - -
only valid when purchased during the original order execution.
Special promotion: Free Gasket with purchase of Sleeve Bearing set. - -
- -
Optional Adders
1 Predict-Plus Wireless Condition Monitor for trending pump health - -
and generating proactive vibration and temperature alerts. Includes 3
years of Cloud Monitoring via web browser and/or mobile app. Class
1 Division 1 Group D certified. Cellular device-to-cloud connection and
powered by field replaceable batteries.
