R18 B.Tech.
EEE Syllabus JNTU HYDERABAD
EE721PE: HVDC TRANSMISSION (PE – IV)
B.Tech. IV Year I Sem. L T P C
3 0 0 3
Prerequisite: Power System-I, Power System-II, Power System Protection, Power System Operation
and Control, Power Electronics
Course Objectives:
To compare EHV AC and HVDC systems
To analyze Graetz circuit and also explain 6 and 12 pulse converters
To control HVDC systems with various methods and to perform power flow analysis in AC/DC
systems
To describe various protection methods for HVDC systems and Harmonics
Course Outcomes: After completion of this course the student is able to
Compare EHV AC and HVDC system and to describe various types of DC links
Analyze Graetz circuit for rectifier and inverter mode of operation
Describe various methods for the control of HVDC systems and to perform power flow analysis
in AC/DC systems
Describe various protection methods for HVDC systems and classify Harmonics and design
different types of filters
UNIT- I
Basic Concepts Necessity of HVDC systems, Economics and Terminal equipment of HVDC
transmission systems, Types of HVDC Links, Apparatus required for HVDC Systems, Comparison of
AC and DC Transmission, Application of DC Transmission System, Planning and Modern trends in D.C.
Transmission.
Analysis of HVDC Converters: Choice of Converter Configuration, Analysis of Graetz circuit,
Characteristics of 6 Pulse and 12 Pulse converters, Cases of two 3 phase converters in Y/Y mode –
their performance.
UNIT- II
Converter and HVDC System Control: Principle of DC Link Control, Converters Control
Characteristics, Firing angle control, Current and extinction angle control, Effect of source inductance
on the system, Starting and stopping of DC link, Power Control.
Reactive Power Control in HVDC: Introduction, Reactive Power Requirements in steady state,
sources of reactive power- Static VAR Compensators, Reactive power control during transients.
UNIT- III
Power Flow Analysis in AC/DC Systems: Modelling of DC Links, DC Network, DC Converter,
Controller Equations, Solution of DC load flow, P.U. System for DC quantities, solution of AC-DC Power
flow-Simultaneous method-Sequential method.
UNIT- IV
Converter Faults and Protection: Converter faults, protection against over current and over voltage
in converter station, surge arresters, smoothing reactors, DC breakers, Audible noise, space charge
field, corona effects on DC lines, Radio interference.
UNIT-V:
Harmonics: Generation of Harmonics, Characteristics harmonics, calculation of AC Harmonics, Non-
Characteristics harmonics, adverse effects of harmonics, Calculation of voltage and Current harmonics,
Effect of Pulse number on harmonics
105