High Definition Digital Video Tracking Matrix Switcher

Professional Matrix Switchers

Installation and Operation Manual

V 1.1
Remark:

„ All rights reserved for translation, reprint or reproduction

„ Contents may change without prior announcement

„ All technical specifications are guideline data and not guaranteed features

„ Taiden Co., Ltd. is not responsible for any damage caused by improper use of this manual

„ The equipment must be connected to earth!

„ This product conforms to the rules of the European directive 2004/108/EC.

„ If any detailed information needed, please contact your local agent or TAIDEN service center in your region.

Any feedback, advice and suggestion about the products is appreciated

„ TAIDEN is the registered trademark of TAIDEN Co., Ltd.

I
Important Safety Instruction
1. Read and keep these instructions. 15. Do not place the equipment on any uneven or
2. Heed all warnings and follow all instructions. unstable stand; original product package or
3. The apparatus shall not be exposed to dripping or appropriate package should be used to avoid damage
splashing and that no objects filled with liquids, such caused by strong impacts during transportation.
as vases, shall be placed on the apparatus. 16. Power supply cords:
4. The MAINS plug serving as a disconnection device, AC 100 V-120 V 60 Hz or AC 220 V-240 V 50 Hz
should be easy to operate. 17. The quantity of connected units in one system should
5. The apparatus should be connected to the MAINS not exceed prescribed quantity. For service, please
socket-outlet with protective earth. contact the nearest TAIDEN Service Center.
6. Clean only with dry cloth. 18. Use ONLY specified connection cable to connect the
7. Do not block any ventilation openings. Install in system equipment.
accordance with the manufacturer’s instructions. 19. All TAIDEN products are guaranteed for definite time
8. Do not install near any heat sources such as radiators, (see the WARRANTY CARD for details) excluding the
heat registers, stoves, or other apparatus (including following cases:
amplifiers) that produce heat. A. All damage or malfunction caused by human
9. Do not defeat the safety purpose of the polarized or negligence;
grounding-type plug. A polarized plug has two blades B. Damage or malfunction caused by improper
with one wider than the other. A grounding type plug operating by operator;
has two blades and a third grounding prong. The wide C. Parts damage or loss caused by disassembling
blade and the third prong are provided for your safety. the product by non-authorized personnel.
If the provided plug does not fit into your outlet, 20. Upon receipt of the product, please fill out the
consult an electrician for replacement of the obsolete Warranty Card enclosed and post it to TAIDEN
outlet. Service Center nearby in your region.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the CAUTION: To reduce the risk of electric shock,
apparatus. When a cart is used, use caution when DO NOT open covers, no user serviceable parts
moving the cart/apparatus combination to avoid injury inside. Refer servicing to qualified service
from tip-over. personnel only.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
CAUTION: DO NOT use alcohol, ammonia or
14. Refer all servicing to qualified service personnel.
petroleum solvents or abrasive cleaners to
Servicing is required when the apparatus has been
clean the devices.
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
The lightning flash with an arrowhead symbol, with
have fallen into the apparatus, the apparatus has
an equilateral triangle, is intended to alert the user
been exposed to rain or moisture, does not operate to the presence of uninsulated ‘dangerous voltage’
normally, or has been dropped. within the products enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

II
Important Safety Instruction
The exclamation mark within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.

WARNING: To reduce the risk of fire or

electric shock, DO NOT expose units to rain
or moisture.

Attention: Installation should be performed by

qualified service personnel only in accordance
with the National Electrical or applicable local
codes.

Power Disconnect: Units with or without ON – OFF

switch have power supplied to the unit whenever
the power cord is inserted into the power source;
however, the unit is operational only when the ON
– OFF switch is in the ON position. The power cord
is the main power disconnect for all units

WARNING: The apparatus should be

connected to a mains socket outlet with a
protective earthing connection.

III
 Contents
Installation & User Guide........................................................................................................... V
Chapter 1. High Definition Digital Video Tracking Matrix Switchers............................................ 1
1.1 Functions and indications .................................................................................................................................1
1.2 Installation and connection ...............................................................................................................................2
1.2.1 Installation ..................................................................................................................................................2
1.2.2 Connection between Mixed Switcher and PC............................................................................................2
1.2.3 Connection with input, output devices .......................................................................................................2
1.3 Setup and Operation.........................................................................................................................................4
1.3.1 Menu setup ................................................................................................................................................4
1.3.2 Switch operation.........................................................................................................................................7

Chapter 2. IR Remote Control .................................................................................................. 10

Chapter 3. Communication protocol and control code.............................................................. 11
Chapter 4. Technical data......................................................................................................... 13

IV
Installation & User Guide
About this manual This manual is applicable to:

This manual is a comprehensive guide to the TMX-0404SDI

installation and operation of TAIDEN SDI Series High 4×4 High Definition Digital Video Tracking Matrix Switcher
Definition Digital Video Tracking Matrix Switchers. It (SD/HD/3G)
includes: connection and operation, protocol and
control code, etc. TMX-0804SDI
4×4 High Definition Digital Video Tracking Matrix Switcher
(SD/HD/3G)
The manual is divided into the following chapters:

Chapter 1: High Definition Digital Video Tracking TMX-0808SDI

4×4 High Definition Digital Video Tracking Matrix Switcher
Matrix Switchers
(SD/HD/3G)
Descriptions in detail of the functions and indications,
installation and connection, configuration and operation
of High Definition Digital Video Tracking Matrix
Switchers.

Chapter 2: IR Remote Control

Introduction into the operation of IR remote control.

Chapter 3: Communication protocol and control

code

Detailed description of codes and their function.

Chapter 4: Technical data

Mechanical and electrical details of the High Definition

Digital Video Tracking Matrix Switchers.

V
 Chapter 1. High Definition Digital Video Tracking Matrix Switchers

1.1 Functions and indications

Figure 1.1 Panels of SDI Matrix Switcher

Front panel: Rear panel:

1. “MENU” button 9. TAINET interface
a) If in current state, press “MENU” go to main 10. RS-422/485 interface
menu; 11. Video inputs
b) If in menu state, press “MENU” go to sub 12. Video outputs
menu; 13. CVBS output / synchronized loop out
c) Select/Deselect in network configuration. 14. Power cable interface
2. “Õ” (Left) button 15. Grounding point
3. “Ö” (Right) button 16. CVBS input / synchronized input
4. “Exit” button 17. RJ45 interface
™ Return to previous directory or root. 18. RS-232 communication interface COM1
5. IR receiving window
™ Receives the IR signals from remote control;
make sure the remote control aims at the
window.
6. “NETWORK” indicator
™ Indicator flashes if Matrix Switcher is
connected with PC software.
7. “ACTIVE” indicator
™ Indicator will be turned on if Matrix Switcher
executes switch instructions.
8. “POWER” indicator

1
1.2 Installation and connection

1.2.1 Installation 1.2.3 Connection with input, output devices

1U High Definition Digital Video Tracking Matrix High Definition Digital Video Tracking Matrix Switcher
Switcher just needs to put it into the cabinet, and fix it supports various digital video signal sources, including:
by screws. As figure 1.3. full HD (3G), HD and SD. As figure 1.4.
Please use good quality Twisted Pair cable to connect
input and output device, i.e. RG59 and RG60.
Control Interface:
Video Track Off

COM (RS-232) 9 pin female D connector

Baud rate: 9600, data: 8 bits,
Figure 1.3 Installation COM1
stop: 1 bit, no parity check bit
RJ45 To matrix PC software
RS422/RS485、
1.2.2 Connection between Mixed Switcher and PC Invalidation
TAINET
Video Track On
High Definition Digital Video Tracking Matrix Switcher
COM (RS-232) 9 pin female D connector
can be can be controlled by Central Control System via
Baud rate: 9600, data: 8 bits,
RS-232 interface COM1, this interface is also used for COM1
stop: 1 bit, no parity check bit
software upgrade. As figure 1.4.
RJ45 Invalidation
Baud rate: 19200, to TO VIDEO
TAINET
SWITCHER of main unit
Baud rate: 9600, to doom
RS422/RS485
camera

Note:
) If connected with camera by RS232 protocol,
the matrix switcher and the camera must be
common ground.

2
Figure 1.4 Connection example for input and output devices to TMX-0808SDI Matrix Switcher

3
1.3 Setup and Operation

1.3.1 Menu setup

1.3.1.1 Menu setup

To explain menu setup of SDI series Matrix Switcher, Menu 1 to menu 8 are explained explicitly:
TMX-0808SDI serves as example.

1. Ring
TMX-0808SDI main interface:
Buzzer ring on-off of this unit. If buzzer ring is setup
TMX-0808SDI
Version: 2.10 “on”, the buzzer will ring when front panel operation,
PC software executing switch and receiving command
Press “MENU” to enter main menu and press “Õ/Ö” from central control system. The buzzer ring can be
until “Setting” prompts; Press “MENU” again to enter setup “off”.
setup menu, including:  ON: open ;
1. Ring  OFF: close.
2. COM2 Baud rate
3. Demo Switch Delay
TMX-0808SDI
4. COM1 protocol Version: 2.10

5. Sync Switch Delay 1. Press “MENU” to enter setup menu and

6. Test button press “Õ/Ö” until “Setting” prompts;

Setting
7. Video Track
8. Video Track Type
2. Press “MENU” and press “Õ/Ö” until “Ring”
prompts;
Press “EXIT” to exit menu. Ring
OFF

3. Press “MENU” to enter setup;

Note:
Ring
) When Video Tracking is off, RJ45 has ▋OFF

TCP/IP function. 4. Press “Õ/Ö” to select parameter;

) When Video Tracking is on, RJ45 is
Ring
Invalidation; camera protocol can be ▋ON

selected from Video Track Type menu; 5. Press “MENU” to confirm.

RS422/RS485 can be connected to control
Ring
doom camera; TAINET can be connected to ON

congress main unit.

) COM1 port can be connected to central
2. COM2 Baud rate
control system.
SDI series Matrix Switcher has no COM2 port, so this
item can’t be adjustable.

4
3. Demo Switch Delay 5. Sync Switch Delay

The interval ranges from 2 seconds to 60 seconds by This item can’t be adjustable.
steps of 2 seconds.

6. Test button
TMX-0808SDI
Version: 2.10 Tested button is working if character changes when
1. Press “MENU” and press “Õ/Ö” until button is pressed.
“Setting” prompts;
Setting
7. Video Track

2. Press “MENU” and press “Õ/Ö” until Select the function of video track on or off.
“Demo Switch Delay” prompts;
DemoSwitchDelay:
2 S
TMX-0808SDI
Version: 2.10
3. Press “MENU” to enter setup;
1. Press “MENU” and press “Õ/Ö” until
DemoSwitchDelay:
▋2 *S “Setting” prompts;
Setting
4. Press “Õ/Ö” to adjust parameter;
DemoSwitchDelay: 2. Press “MENU” and press “Õ/Ö” until
▋4 *S “Video Track” prompts;
5. Press “MENU” to confirm. Video Track
OFF
DemoSwitchDelay:
4 S 3. Press “MENU” to enter setup;

Video Track
▋OFF
4. COM1 protocol
4. Press “Õ/Ö” to adjust parameter;
Central control system can be selected from Taiden,
Video Track
Extron or Other, Please add correct protocol according ▋ON

to user request. 5. Press “MENU” to confirm.

Video Track
TMX-0808SDI ON
Version: 2.10

1. Press “MENU” and press “Õ/Ö” until

“Setting” prompts; Note：
Setting ) The function of video track on will be enabled
after rebooting the matrix switcher.
2. Press “MENU” and press “Õ/Ö” until
“COM1 protocol” prompts;
COM1 protocol:
Taiden

3. Press “MENU” to enter setup;

COM1 protocol:
▋Taiden

4. Press “Õ/Ö” to select parameter;

COM1 protocol:
▋Extron

5. Press “MENU” to confirm.

COM1 protocol:
Extron

5
8、Video Track Type

When Video Track is on, camera protocol can be

selected from HCS-3316RS232/ HCS-3316RS485/
SONY HD1/ PELCO D/ PELCO DC/ PELCO P1/
PELCO P2/ PANASONIC CS950/ PANASONIC
HE100/ SAMSUNG C6407P/ HCS-3313C/ SONY D70/
SONY D100/ SONY BRC-Z330/ SONY BRC300/
SONY BRC700. Please select correct protocol
according to actual device type.

TMX-0808SDI
Version: 2.10
1. Press “MENU” and press “Õ/Ö” until
“Setting” prompts;
Setting

2. Press “MENU” and press “Õ/Ö” until

“Video Track Type” prompts;
Video Track Type
PELCO P1

3. Press “MENU” to enter setup;

Video Track Type

▋PELCO P1

4. Press “Õ/Ö” to select parameter;

Video Track Type

▋PELCO P2

5. Press “MENU” to confirm.

Video Track Type

PELCO P2

6
1.3.2 Switch operation

To explain menu operation of SDI series Matrix Menu 1 to menu 9 are explained explicitly:
Switcher, TMX-0808SDI type serves as example. All
SDI series Matrix Switcher can refer to it.
1. Switch Video

Note： Video switch key, switches one input video signal to

) “Input channel” and “output channel” number any or all output channels.
must be less than matrix type. For example:
TMX-08xxSDI series can only input number Example: Switch Video signal of input channel 1 to
1-8. output channel 8
) If any menu item is edited, except setup
menu, a key must be pressed within 15 TMX-0808SDI
seconds otherwise the system will return to Version: 2.10

main menu item automatically and erase the 1. Press “MENU” to enter menu;
previous channel setup. Switch Video：
) To return to main menu press any key if
currently editing user interface is switch finish 2. Press “MENU” to enter “Switch Video”;
interface, display input, output status Switch Video：
interface or DEMO interface. To return to 0 ——＞： 1

main menu if editing other user interface 3. Press “MENU” to select input channel;
press “EXIT” or “Õ”. 4. Press “Õ/Ö” to adjust input channel as “1”;
Switch Video：
▋1 ——＞： 1

5. Press “MENU” to select output channel;

TMX-0808SDI main interface: 6. Press “Õ/Ö” to adjust output channel as “8”；
TMX-0808SDI Switch Video：
Version: 2.10 1 ——＞：▋8

7. Press “MENU” to confirm and press “EXIT”

twice.
Press “MENU” to enter switch menu, including:
Switch OK !
1. Switch Video
2. Switch through
* Switch through one channel or all channels.
3. Close
* Close one output or all outputs. Note：
4. Save scene ) If input channel displays “0”, output channel is
5. Recall scene closed.
6. Undo ) If output channel displays “ALL”, input channel
* Undo last switch. is switched to all output channels.
7. Demo Switch
* Switch one by one.
8. Setting
* Setup menu.
9. Status
* Request channel state.

7
2. Switch through 4. Save scene

Switch through one input channel or all input channels Save current video signal to appointed scene. 10
to corresponding output channel(s). scenes can be saved at most, each scene has a
number, from 0 to 9.
Example: Switch through channel 2.
Example: Save scene 3
TMX-0808SDI
Version: 2.10
TMX-0808SDI
1. Press “MENU” and press “Õ/Ö” until Version: 2.10

“Switch through” prompts; 1. Press “MENU” and press “Õ/Ö”until “Save

Switch through： scene” prompts;
Save scene：
2. Press “MENU” to enter “Switch through”;

Switch through： 2. Press “MENU” to enter “Save scene”;

▋1
Save scene：
3. Press “Õ/Ö” to select channel “2”; ▋0

Switch through： 3. Press “Õ/Ö” to select scene number “3”;

▋2
Save scene：
4. Press “MENU” to confirm. ▋3

4. Press “MENU” to confirm.

Switch OK !
2
Save scene OK !
3
Note：
) Select “ All ” standing for switch through all
channels.

3. Close 5. Recall scene

Close one output channel or all output channels. Recall video signal from selected scene.

Example: Close output channel 2. Example: Recall scene 3

TMX-0808SDI
Version: 2.10 TMX-0808SDI
Version: 2.10
1. Press “MENU” and press “Õ/Ö” until
1. Press “MENU”, and press “Õ/Ö” until
“Close” prompts;
“Recall scene” prompts;
Close
Recall scene：

2. Press “MENU” to enter “Close”menu;

2. Press “MENU” to enter “Recall scene”;
Close
▋1 Recall scene：
▋0
3. Press “Õ/Ö” to select channel “2”;
3. Press “Õ/Ö” select scene number “3”;
Close
▋2 Recall scene：
▋3
4. Press “MENU” to confirm.
4. Press “MENU” to confirm.
Switch OK !
2 Switch OK !
3

Note：
) Select “ALL” stands for closing all channels.

8
6. Undo 9. Status

Undo last switch operation. Request corresponding state of input and output
channels.

TMX-0808SDI
Version: 2.10
TMX-0808SDI
1. Press “MENU”, and press “Õ/Ö”until Version: 2.10

“Undo” prompts; 1. Press “MENU” and press “Õ/Ö” until

Undo “Status” prompts;
Status
2. Press “MENU” to execute.

Switch OK ! 2. Press “MENU” to request corresponding

status;

Video: 3 → :1

7. Demo Switch
3. Press “Õ/Ö” to request next status.
Switches one by one all possible combinations from 1 Video: 5 → :2
→1, 1→2, …, 1→8, 2→1, 2→2, …, 2→8, …, 8→1, 8→
2, …to 8→8. The interval can be setup via setup menu
(Refer to section 1.3.1).

TMX-0808SDI
Version: 2.10

1. Press “MENU” and press “Õ/Ö” until

“Demo switch” prompts;
Demo switch：

2. Press “MENU” to execute.

Demo switch：

8. Setting

Setup menu.

TMX-0808SDI
Version: 2.10

1. Press “MENU” and press “Õ/Ö” until

“Setting” prompts;
Setting

2. Press “MENU” to enter setup status. Refer

to section 1.3.1 for details.

SyncSwitchDelay:
0 *ms

9
Chapter 2. IR Remote Control

1. Basic function
Users can use remote control to operate matrixes, the function of
remote control key is the same as matrix front panel key (Please refer
to chapter 1 for detailed instructions).
Please refer to sections of menu operation for detailed operation
method of remote control key.

2. Camera function
For the matrix with and has opened the video tracking function, users
can use remote control to operate the cameras which connected to the
matrix. The functions of camera operate as below:
1) Camera control
a. press the yellow button to enter the menu:
Camera Control
0

b. select a camera ID (1 to 8 buttons);

c. use the following buttons to adjust the camera;
Button Function Button Function Button Function
◄ Left STATUS Up Green Magnify
► Right CLOSE Down Red Lessen
d. press the “CANCEL” button to exit.

2) Camera scan
a. press the blue button to enter the menu:
Camera Scan
0

b. select a camera ID (1 to 8 buttons);

c. use the following buttons to control the direction of the camera;
Button Function Button Function
Frame scan
1 2 Auto cruise
(between preset 30 and 31)
3 scan 300° 4 scan 180°
d. press the “CANCEL” button to exit.

The remote control can be used for all TAIDEN matrix main units with
IR receipt function.

10
 Chapter 3. Communication protocol and control code

This code system is used for controlling and operating Protocol: Baud Rate: 9600; Data: 8 bits; Stop: 1 bit;
TAIDEN professional Matrix Switchers by central Parity Check Bit: No
control system or user programming software.

Type Code Description

Lock; Lock keyboard

Unlock; Unlock keyboard
System Code

BeepOff; Beep off

BeepOn; Beep on
TAIDEN; Select COM1 protocol to be TAIDEN;
EXTRON; Select COM1 protocol to be EXTRON;
OTHER; Select COM1 protocol to be OTHER;
If central control system does not execute switch within 15 s after input channel, TMX main unit cleans up
channel automatically.
0xd9 0xe1 [x1] [x2] Video of input channel [x1] switch to output channel [x2]. If input channel [x1] is 0,
output channel [x2] will be closed.
0xd9 0xe2 [x1] [x2] Audio of input channel[x1] switch to output channel [x2]. If input channel [x1] is 0,
the output channel [x2] will be closed.
0xd9 0xe3 [x1] [x2] Video and audio of input channel [x1] switch to output channel [x2]. If input channel
Operation Code (TAIDEN)

is 0, the output channel [x2] will be closed.

0xd9 0xe4 [x1] e9 Video of input channel [x1] switch to all output channels
0xd9 0xe5 [x1] e9 Audio of input channel [x1] switch to all output channels
0xd9 0xe6 [x1] e9 Video and audio of input channel [x1] switch to all output channels
0xd9 0xec 0x01 0x00 Close all output channels
0xd9 0xeb 0x03 0x00 Go through from all input channels to corresponding output channels
0xd9 0xed 0x02 0x00 Execute switch
0xd9 0xe7 0xe7 scene Save corresponding relation to scene 0,1,2…9
0xd9 0xe8 0xe8 scene Recall scene XX
0xd9 0xe9 0xe9 scene Clear scene XX
0xd9 0xc1 0xc1 0x00 Query the matrix type
0xd9 0xc2 0xc2 0x00 Query the input status of all output channels
0xd9 0xc4 [x1] 0x00 Query the input status of the output channel [x1]
[x1]All. Input channel [x1] switch to all output channels
All#. Setup all channels one-to-one correspondence: 1->1, 2->2, 3->3…
Operation Code (OTHER)

All$. Close all channels

[x1]#. Input channel [x1] switch to output channel [x1]
[x1]$. Close output channel [x1]
[x1]V[x2]. Video of input channel [x1] switch to output channel [x2]
[x1]V[x2],[x3],[x4]. Video of input channel [x1] switch to output channel [x2], [x3], [x4]
[x1]A[x2]. Audio of input channel [x1] switch to output channel [x2]
[x1]A[x2],[x3],[x4]. Audio of input channel [x1] switch to output channel [x2],[x3],[x4]
[x1]B[x2]. Video and audio of input channel [x1] switch to output channel [x2]
[x1]B[x2],[x3],[x4]. Video and audio of input channel [x1] switch to output channel [x2],[x3],[x4]

11
 Save[X]. Save current status to scene [X]
Recall[X]. Recall scene X]
Clear[X]. Clear scene [X], status of all output channel are closed
Type*. Query the matrix type
Status[x1]. Query the input status of the output channel [x1]
Status. Query the input status of all output channels
[X1]*[X2]! Video and audio of input channel [x1] switch to output channel [x2]
EXTRON;

[X1]*[X2]$ Audio of input channel [x1] switch to output channel [x2]

[X1]*[X2]% Video of input channel [x1] switch to output channel [x2]
[X1]*[X2]& Input channel [x1] switch to output channel [x2]

Note:
) [x1], [x2], [x3], [x4] is channel number of input or output; only 1~8 available, otherwise regarded as error.
) “[“ and ”]” do not send code;
) End each command by code such as “.”, “;”.

Command examples:
7. [x1]V[x2].
1. System code: TAIDEN; EXTRON; OTHER;
For example: Video of input channel 3 switch to
For example: convert a TAIDEN code system unit output channel 5, code is “3V5.”. Video of input
to a EXTRON code system unit, run “EXTRON;”, channel 3 switch to output channel 8, 9, 12, code
then the unit will only support code ends with is “3V8,9,12.”.
“!$%&”.
8. [x1]A[x2].
2. [x1]All.
For example: Audio of input channel 10 switch to
For example: Input channel 3 switch to all output output channel 2, code is “10A2.”. Audio of input
channels, code is “3All.”. channel 10 switch to output channel 2, 5, 6, code
is “10A2,5,6.”.
3. All#.
9. [x1]B[x2].
Setup all channels one-to-one correspondence:
1->1, 2->2, 3->3…8->8. For example: Video and audio of input channel 1
switch to output channel 2, 3, 5, code is “1B2,3,5.”.
4. All$.
10. Save[x].
Close all output channels.
For example: Save current status to scene 7, code
5. [x]#.
is “Save7.”.
For example: Input channel 5 switch to output
11. Recall[x].
channel 5, code is “5#.”.
For example: Recall scene 5, code is “Recall5.”.
6. [x]$.

For example: Close output channel 5, code is

“5$.”.

12
 Chapter 4. Technical data

Type
TMX-0404SDI TMX-0804SDI TMX-0808SDI
Spec.
Video

Date rates 143 Mbps - 2.97 Gbps

Date types 8 bit or 10 bit

Video input
Connectors 4 × BNC female 8 × BNC female

Typical equalization cable length (Belden 1694A standard cable):

100 m @ 2.97 Gbps
Input cable equalization
200 m @ 1.485 Gbps
400 m @ 270 Mbps

Input level 0.7 V - 1.2 Vp-p

Nominal level 0.8 Vp-p
Impedance 75 Ohm

Return loss 20 dB - 30 dB @ 5 MHz to 1.5 GHz

Video output
Connectors 4 × BNC female 8 × BNC female

Nominal level 0.8 V±7%

Output level 0.5 V - 1.6 Vp-p

Impedance 75 Ohm

Return loss >15 dB @ 5 MHz to 1.5 GHz

DC offset ± 100 mV with no offset at input

20 ps - 30 ps @ HD/3G rate
Jitter
40 ps - 60 ps @ SD rate

Rise and fall time SD: 600 ps

(20~80%) HD/3G: 100 ps

Control

Video track off:

COM (RS-232) RS-232, 9 pin female D connector

COM1 Baudrate: 9600, data: 8 bits, stop: 1 bit, no parity

RJ45 TCP/IP

RS422/RS485/TAINET Invalidation

Video track on:

COM (RS-232) RS-232, 9 pin female D connector

COM1 Baudrate: 9600, data: 8 bits, stop: 1 bit, no parity

RJ45 Invalidation

TAINET Baudrate: 19200, to main unit

RS422/RS485 Baudrate: 9600, to dome camera

13
 Type
TMX-0404SDI TMX-0804SDI TMX-0808SDI
Spec.
General spec.

Power supply 100 V AC - 240 V AC，50/60 Hz

Temperature Operating: 0 °C to + 50 °C; storage: -20 °C to + 70 °C

Humidity Storage and operating: 10% to 90%

Dimensions h × w ×d
483×208×43 (1U high, full rack width)
(mm)

Weight 2.7 kg
Mean time between
30，000 hours
failures

14
www.taiden.com

TAIDEN INDUSTRIAL CO.,LTD.

Copyright by TAIDEN

Last Revision: 09/2014