INTRODUCTION

Welcome to Aeroflow’s 12th edition catalogue

Another massive year! We have added 129 new pages and over 1000 new part numbers since edition 11!
Aeroflow Performance Products, were created by car enthusiast, for car enthusiasts.
Since 2010, Aeroflow Performance Products has grown to design and manufacture close to 11000 exceptional quality products. Fittings and hoses, fuel system
components, air and oil filters, oil systems, silicone hoses, fabricated tanks, alternators, workshop tools and much more. We as a company have tried to lead the way
for the Performance enthusiast.
We have a comprehensive product range for the Global Market for Hot Rods, Drag Racing, Speedway, Street Machines, JDM , Sport Compact Racing, Road Racing,
Rallying, Tractor Pulling, Off-Road Racing, Motorcycles and Marine markets.
Based in Huntingwood, Sydney, Australia, Aeroflow was created to produce outstanding quality parts and offer value for money. This car racing family owned company
is still based on the principles the company was founded on, quality product, quality service and a true passion for the performance industry.
At Aeroflow our goal is to exceed the highest standards. In both form and function. Aeroflow distributes its diverse line of products around the globe and maintains a
large factory inventory of products to ensure that the worldwide network of performance distributors, re-sellers and installers have access to Aeroflow, any place any
time.
Finally, but most importantly, Aeroflow would like to thank our loyal customers around the globe for your past business and support. Your confidence and appreciation
of Aeroflow is what drives us every day to keep innovating our products, so that each and every time you need a part, you can think Aeroflow has got it covered.

WARRANTY DISCLAIMER
Aeroflow products are manufactured to industry standard specifications from quality materials. Utmost care is taken to ensure products are free from blemishes,
inconsistencies and defects. Aeroflow products carry a one year warranty from the date of purchase however warranty will be void if the product is not used in the correct
way for which it was intended. Proof of purchase will be required for all warranty claims.

As part of Aeroflow’s mission to provide you with the best possible products we are continually looking for ways to improve our products and as such some products may
vary slightly from the pictures and specifications in this catalogue. We reserve the right to change specifications without notice.

Due to some exotic fuels and additives we are unable to guarantee the compatibility of our hoses to all applications.

Aeroflow Performance Products and the Aeroflow logo are Registered trade marks. All material in this publication is copyright and may not be reproduced in any form
without the written permission of Aeroflow performance. Aeroflow Performance does not accept any responsibility for any print errors or misinformation relating to
products. All pictures are for representation purposes only and may vary from the actual product.

22 aeroflowperformance.com
 QUICK INDEX

Contacts
Warehouse:
Quick Index
40 Huntingwood Drive
Huntingwood, NSW, 2148 Hose & Tube 14-25
Postal Address:
PO Box 6670 Blacktown, NSW 2148
Kryptalon Fittings & Hose 26-31
Telephone:
Sales (02) 8825 1999
Technical (02) 8825 1979 Fittings & Adapters 32-80
Fax: (02) 9757 4017
International Phone: 61 2 8825 1999
Brake Fittings, Hose & Accessories 81-95
International Fax: 61 2 9757 4017
Website:
www.aeroflowperformance.com
Air Filtration 96-129
Email:
sales@aeroflowperformance.com Oiling Systems & Accessories 130-145
© Aeroflow Performance Pty Ltd 2021
All material in this publication is copyright and may
Tanks 146-160
not be reproduced in any form without the written

161-164
permission of Aeroflow Performance Pty Ltd. Aeroflow
Performance Pty Ltd does not accept any responsibilty Hardline & Hardline Fittings
for any print errors or misinformation relating to
products. All pictures are for representation purposes
only and may vary from actual product.
Fuel Systems, EFI & Accessories 165-197
WARRANTY NOTE:
Warranties are not transferable. All warranties on
products only apply to the original purchaser. Proof of
purchase is required for all warranty claims.
Engine Components & Accessories 198-231
DON’T SEE IT ? JUST ASK US !
We are constantly expanding our range and adding
new products. So if there is an Aeroflow product you
Electrical Accessories & Gauges 232-262
need and you can’t find it in our catalogue just ask one
of our friendly staff, chances are we might have it in
stock. Keep an eye on our website for the latest new
products at www.aeroflowperformance.com
Cooling, Insulation & Air Conditioning 263-277
WE ARE A Transmission & Driveline 278-295
CAPRICORN
SUPPLIER
Turbo, Nitrous & Supercharger Accessories 296-385
Racing & Safety Accessories 386-388
Follow Us
Fabrication, Exhaust, Alloy & Stainless Bends 389-404
www.facebook.com/aeroflowperformance Silicone Hose 405-410
Tools & Shop Equipment 411-422
www.youtube.com/user/aeroflowperformance
Apparel & Promotional 423-428

instagram.com/aeroflowperformance
Fitting Instructions & Charts 429-435

aeroflowperformance.com 33
 INDEX

A Air Fuel Ratio Gauge 257

Accelerator Pedal - Drive by Wire 189 Air Tank 388
Actuator 372 Alignment Tool 414
Adapter Alternator
AN Flare Cap 68 Alternator 241
Brake Caliper 95 Bracket 227-230
Brake Master Cylinder 94 Mount Kit 240
Breather 106-107 Plug 241
BSP to AN 74, 91 Replacement Part 241
BSP to NPT 78 Aluminium
BSPP to AN 73, 92 Bend 402-403
C4 Pan Fill Dipstick 283 Donut 403
Carburettor 169-170 Hard Line 24, 161
Clutch 94, 286 Tank End 404
Coolant Crossover 264 T-Piece 409
Dual Seat to AN 92 Transition Cone 402
EFI Fuel Pump 185 Tube 402-403
EFI Injector Length 194 U-Bend 403
Engine Mount 289 Washer 58, 91
Fuel Pressure Gauge Adapter 193 AN
Fuel Rail 192-193 AN with NPT Tee 77
Gauge 261 Barb to AN 55, 57
Injector Wiring 252-255 BSP to AN Adapter 74, 91
Inline Barb with 1/8 NPT Port 56, 197 BSPP to AN Adapter 73, 92
Intake 384 Bulkhead 60-61, 277
Inverted Flare to AN 73, 92 Coupler 59-60
Low Profile ORB to AN 71 Dual Seat to AN Adapter 92
Male to Male Barb Adapter 56 Expander 66
Metric Port to 1/8” NPT 67 Extention 69
Metric to AN 70, 73 Flare Cap 68
Metric to NPT 92 Flare Filter 166
Nitrous Bottle 383 Flare Plug 67
NPS to AN 93 Inverted Flare to AN Adapter 73, 92
NPT to A/C fitting 277 Metric to AN Adapter 70, 73, 92
NPT to AN 74-77, 91-92 NPS to AN Adapter 93
NPT to Metric 86 NPT to AN Adapter 74, 76-77, 91-92
NPT to NPT 76 ORB to AN Adapter 68-71
INDEX

Oil Cooler 72, 286 Stepped Tee 78

Oil Filter 133-134 Tee 61-62
Oil Pressure 135, 261 Union 64-66
ORB to 1/8” NPT 67 Washer Seal to AN Adapter 92
ORB to AN 68-71 Washer 58, 80, 91
Plumb Back 377 Weld-on 392
Power Steering 227 Apparel
Radiator Hose 265, 268 Caps 423
Standard F/P Regulator Adapter 193 Ear Plugs 423
Supercharger Water Fitting 264 Hats 423
Transmission 72, 286 Hoodie 423
Tube 161-162 Singlet 424
Turbo 369 Stubby Cooler 423
Union 64-66 T-Shirt 424-428
Washer Seal to AN 92 Application Guide Air & Oil Filter 112-129
Aero Clamp Plier 21, 412 Axle Housing T-Bolt 294
Aero Clamp 21, 412 Axle Tube End 295
Air Bleed 385 Axle Tube 295
Air Con Charge Port Cover 274 Axle 295
Air Conditioning
Bracket
Bulkhead
230, 276
277 B

Fitting 275
Hose 19, 274 Baffle Inserts - Oil Pan 137
Olive 275 Bag
Valve 275 Turbo 269, 364-365
Air Filter 96-106 Wastegate 270, 375
Accessories 106 Balancer Bolt 204
Application Guide 112-129 Balancer Tool 414
Assembly 102-104 Banjo
Base 105 Bolt 57-58
Breather 106, 108-109 Carburettor 169
Cleaning Instructions 110-111 Fitting 57-58
Cleaning Products 109 Fuel Pump 180
Cold Air Intake System 99 Stainless 89-90
Panel Filter 96-98 Stainless Banjo Bolt 90
Pod Filter 100-101 Bar Mount 386
Replacement 96-98 Barb
Round 98 Fitting 19, 55-57
Top 104 Hose Barb 19
Universal Element 105-106 Inline Barb with 1/8 NPT Port 56, 197
42 aeroflowperformance.com
 INDEX

Tee 56, 409 Bulkhead

Weld-on 391 Air Conditioning 277
Barricade 272-273 Aluminium 60-61
Battery Brake Bleed Nipple 94
Box 244 Electrical Connector 247
Hold Down Clamp 244 Electrical Terminal 247
Isolator Switch 245 Fuel Cell 160
Terminal 245 Stainless 85
Tray 244 Turbo Drain 369
Beanie Bulkhead Nut
Turbo 269, 364-365 Aluminium 60
Wastegate 270, 375 Stainless 87
Bellmouth 371 Bump Cup 389
Belt Tensioner 227 Burst Panel Deflector Shield 385
Belts - Gilmer 224 Bypass Plate - Oil 134
Bend
Aluminium
Silicone
402-403
407-409
C

Stainless 393-394 Cable Extensions 200
Blanket Cable
Turbo 269, 364-365 Accessories 200-201
Wastegate 270, 375 Kick Down 285
Bleeder Control System 389 Morse 201
Bleeder Setting Tank 389 Shifter 282
Block Pressure Sensor 256 Throttle 198-199
Block Adapter 133-134 Caliper Adapter 95
Block Hugger 399-400 Cam
Block Off Plate 204 Locking Plate 205
Blow Off Valve Adapter 377 Thrust Button 204
Blow Off Valve 376 Thrust Plate 204
Blower - See Supercharger Cam Degree Wheel 417
Blower Dual Carb Linkage Kit 199 Cap
Bonnet Adjuster 231 AN Flare 68
Bonnet Hinge 231 Baseball 423
Boost Controller 378-379 Radiator 269
Boots - Ignition Leads/Wire 235-237 Car Ramps 419
Bottle Adapter 383 Carburettor
Bottle Bracket 382 Accessories 169-170, 198-200
Bottle Mount 386 Adapter 169-170

INDEX
Bracket Banjo 169
Air Conditioning 230, 276 Base Gasket 198
Alternator 227-230 Fuel Log 171
EFI Fuel Pump 181 Fuel Pump 172-173
Line Support 367 Fuel Rails 170
Nitrous Bottle 382 Jet Storage Plate 413
Power Steering Delete 226 Linkage Arm 199
Power Steering Pump 227 Linkage Ball 198
Throttle Cable 200 Return Spring 199-200
Bracket & Lever Kit 281 Spacer 198
Braided Hose 16-19 Stud 198
Brake Throttle Cable Bracket 200
Bleed Nipple Bulkhead 94 Throttle Cable 198
Booster Valve 94 Case - Diff 293
Caliper Adapter 95 Cast Elbow 370
C-Clip 93 Catalytic Converter 400
Fitting 84-93 Catch Can 148
Hard Line 23, 81, 161 C-Clip 93
Hose Mounting Bracket 93 Cell
Master Cylinder Adapter 94 Fuel 154-156
Propotioning Valve 94 Fuel Cell Accessories 159-160
Reservoir 93 Fuel Sender Unit 159
Residual Pressure Valve 94 Remote Filler 159
Stainless Fitting 86-93 Safety Foam 160
Vaccum Pump Kit 95 Spill Tray 159
Vaccum Reservoir Tank 94 Ceramic Boot 236-237
Breather Chassis Stand 421
Hose 19 Check Valve 160, 167
Hose Barb 19 Clamp
Adapters 106-107 Aero 412
Differential 294 Aero Clamp Pliers 21
Filter 106, 108-109 Aero Clamp 21
Tank 148-149 Battery Hold Down 244
BSP Constant Tension 405
BSP to AN Adapter 91 Distributor Hold Down 234
BSP to NPT Adapter 78 EFI 404
BSPP Hard Line 25, 81-82, 164
BSPP to AN Adapter 73, 92 Hose 404
Washer 58, 80, 91 Intercooler 405

aeroflowperformance.com 53
 INDEX

P-Clamp 24-25, 82, 163-164 Ring Gear Bolt 293

T-Bolt 404 Spool 292
Turbo V-Band 365 Spring Perches 295
Vacuum 404 U-Joint U-Bolts 290
V-Band Clamp 398 Universal Joint 290
Clutch Universal Joint Girdle 290
Adapter 94, 286 Weld-on Filler 392
Flow Control Valve 287 Wheel Studs 295
Reservoir 93 Yoke 290
Coil Dipstick
Bracket 238-239 Engine Oil 145, 205
Extention Harness 239, 251 Transmission 282
Harness 240, 251 Distributor Accessories 232-233
Ignition Coil 238-239 Distributor Hold Down Clamp 234
Plug 240, 251 Distributor 232-233
Coil Over Adjustment Tool 413 Donut
Cold Air Intake System 99 Aluminium 403
Collector 399 Stainless 395
Compressor Wheel Speed Sensor 371 Drain Bulkhead 369
Compressor Wheel Speed Sensor Kit 371 Drain Hose 368
Cone - Transition 394, 402 Drain Kits - Turbo 368
Connector Drain Plug 137
Electrical 258-259 Drain Valve 391
Electrical Bulkhead 247 Drain 369
Constant Tension Clamp 405 Drive by Wire
Coolant Crossover 264-265 Accelerator Pedal 189
Cooler Throttle Body 188-189
Oil 135-137 Drop Box 281
Power Steering 137 Dry Sump Tank 148
Cooler Line Kit - Oil 134 Dual Seat to AN Adapter 92
Coupler Dust Cap & Plug Kit 416
AN 59-60 Dzus Fastener Tool 413
NPT 78
ORB 68
ORB to NPT
Steel AN
69
84
E
Supercharger 384 E85 Content Tester 416
Cover Ear Plugs 423
INDEX

Air Con Charge Port 274 EFI

Flywheel/Flexplate Inspection 287 Check Valve 180
Cover - Tyre 387 Clamps 404
Creeper 420 Disconnect Tool 415
Crimp Tool 415 Fuel Delivery Kit 173
Crossover - Coolant 264-265 Fuel Injector Adapter 193-194
Crush Sleeve 292 Fuel Injector 194-196
Cutting Film 415 Fuel Pressure Regulator 184
Cylinder Head Components 222 Fuel Pump Banjo 180
Cylinder Heads 206-221 Fuel Pump Bracket 181
Fuel Pump Inlet Screen 180
D Fuel Pump Silencer
Fuel Pump
180
173-179
Fuel Rail Adapter 192-193
Deburring Tool 417 Fuel Rail Extrusion 192
Deck Bridge 413 Fuel Rail 190-192
Degree Wheel 417 Injector Blank Off Insert 194
Depining Tool 251 Injector Length Adapter 194
Diesel Injector Plug 255
Catch Can 149 Injector Wiring Adapter 252-255
Fuel Pump 179 LS Throttle Cable 199
Differential Pump Accessorie 182
Assembly Stand 419 Pump Adapter 185
Axle Housing T-Bolt 294 Push-on EFI Fitting 185-187
Axle Tube End 295 Quick Disconnect Tool 187
Axle Tube 295 Throttle Body 188-189
Axle 295 Weld-on Injector Bung 193, 392
Breather 294 EGT Bung/Cap 392
Case 293 Elbow
Centre Housing Stud 294 Cast 370
Crush Sleeve 292 Silicone 407-409
Gasket 293 Electric
Housing 294 Diesel Fuel Pump 179
Overhaul Kit 293 EFI Fuel Pump 173-179
Pinion Bearing Kit 291 Fan 262
Pinion Nut 291 Low Pressure Fuel Pump 172-173
Pinion Seal 291 Oil Pump 135
Pinion Shim Kit 292 Water Pump 263
Pinion Support 291 Electrical Bulkhead Connector 247
Powertrax LSD 292 Electrical Bulkhead Terminal 247

62 aeroflowperformance.com
 INDEX

Electrical Connector/Kit 258-259 Stainless Banjo 89-90

Elite Hose End 32-33 Steel AN Coupler 84
Engine Cradle 421 T-Piece 409
Engine Crane 421 Tube Nut 84
Engine Leveling Tool 420 Tube Sleeve 84
Engine Lift Plate 420 Turbo 366
Engine Mount Adapters 289 Y-Block 62-63
Engine Oil Dipstick 145, 205 Flag - Parachute 388
Engine Stand 421 Flange
Engine Start Switch 245 2 Bolt 397
Engine Support Bar 420 3 Bolt 397
Ethanol Content Sensor 256 Header 397
Exhaust Control Valve 400 Turbo 396
Exhaust Flange Gasket 395 Flare Filter 166
Exhaust Hanger 400 Flaring Tool 81, 418-419
Expander Flex Braid Wrap 272
AN 66 Flex Fuel Sensor 256
NPT 78 Flexible Joint 395
Silicone 408-409 Flexplate 287-289
Extension Flexplate Inspection Cover 287
Fly by Wire 252 Flow Control Valve - Clutch 287
O2 Sensor 252 Flow Control Valve - Power Steering 226
AN 69 Flush Cutter 415
Metric 69 Fly by Wire Extension Harness 252
NPT 76 Flywheel Inspection Cover 287
ORB to AN 69 Fuel
Extention Harness - Coil 239, 251 Cell 154-156
Extrusion - Fuel Rail 192 Cooler Tank 151, 181
EFI Fuel Pump Adapter 185

F EFI Fuel Pump Bracket

EFI Pressure Regulator
181
184
Filter 165-167
Fan Fuel Sender Unit 159
Controller 262 Injector 194-196
Electric 262 Log 168
Mounting Kit 262 Pressure Gauge 197, 260
Relay & Wiring Kit 246, 262 Pump Block Off Plate 204
Spacer 226 Pump Hanger 154-158

INDEX
Fan Activation Switch 261 Pump Regulator - Carb 171-172
Fastener Pump Silencer 180
Dress up Bolt 231 Pumps - Diesel 179
Harmonic Balancer 204 Pumps - EFI 173-179
Axle Housing T-Bolt 294 Pumps - Low Pressure Electric 172-173
Banjo 57-58 Safety Foam 160
Diff Centre Housing Stud 294 Tank 154-156
Ring Gear 293 Fuel Bowl Blank-Off Plug 169
Supercharger Stud Kit 385 Fuel Delivery Kit 173
Turbo Stud 369 Fuel Injector
Universal Joint 290 Adapter 193-194
Wheel Stud 295 EFI Injector Length Adapter 194
Fender Cover 422 Injector Blank Off Insert 194
Filler Cap 107, 224, 390-391 Injectors 194-196
Filter Service kit 196
Air 96-106 Weld-on Injector Bung 193, 392
Breather 106, 108-109 Fuel Jug Cover 274
Fuel 165-167 Fuel Log 171
Nitrous 382 Fuel Rail
Oil 130-131, 165-167 Adapter 192-193
Radiator 266 Carburettor 170
Turbo Inline Oil 367 EFI 190-192
Fire Supression Kits & Accessories 386 Extrusion 192
Firewall Feed Through 238 Fuse Holder 247
Fitting Fusible Link Power Feed 247
Air Conditioning 275
AN Expander
Banjo
66
57-58 G
Barb 19, 55-57
Brake 84-93 Gasket
Couplers 59-60, 84 9” Centre Gasket 293
Fuel Cell Bulkhead 160 Carburettor Base 198
Hard Line 161-162 Exhaust Flange 395
Hose Barb 19 LS Gasket Kit 203
Power Steering 227 Supercharger 383
Push to Connect 54 Trans Pan 285
Push-on EFI 185-187 Turbo 370
Quick Release 79, 83-84 Turbo Drain 368
Specification Chart 429
Specification 14

aeroflowperformance.com 73
 INDEX

Gauge Nylon 23, 54

Adapter 135, 261 Pressure Test Tag 416
Air Fuel Ratio 257 PTFE 80
Fuel Pressure Gauge Adapter 193 Push Lock 20-21, 50-51
Inline Barb with 1/8 NPT Port 56, 197 Separator 24-25, 83, 164
Line Kit 260-261 Silicone 406-410
Nitrous Pressure 382 Specifications 15
Pressure 197, 260 Stainless Steel Braided Cover 22
Gilmer Turbo Drain 368
Belt 224 Ultra-Light Kevlar Braided 26
Drive Kit 225 Vacuum 409
Pulley 225 Hose Cutter 26, 417
Girdle - Universal Joint 290 Hose End
Grommet -Valve Cover 223 100 Series 42-43
Guard Cover 422 100/150 Series Socket 43
Guide Plate 222 150 Series 40-41
200 Series 48-50

H 400 Series
500 Series
52-53
38-39
500/550/880 Series Socket 39
Hanger 510 Series 51-52
Exhaust 400 550 Series 34-37
Fuel Pump 154-158 570 Series 46-47
Hard Line 880 Series 32-33
Aluminium 24, 161 Braided Rubber 32-45
Brake 23, 81 Cutter Style 32-37
Clamp 25, 81-82, 164 Cutter Style Socket 39
Coated Steel 23, 81 Dust Cap & Plug Kit 416
Fitting 161-162 Elite (Chrome) 32-33
Olive 162 Kryptalon 28-31
Pipe Cutter 81, 163, 418 Kryptalon Replacement Olive 31
Stainless 23-24, 80, 161 Kryptalon Socket 31
Harmonic Balancer Bolt 204 NPT 37, 44
Harmonic Balancer Tool 414 ORB 37, 44-45, 47
Harness PTFE 46-50
Coil 240, 251 PTFE (Stainless) 84-85
Fly by Wire Extension 252 PTFE (Steel) 84
Intake Sensor 252 PTFE Replacement Olive 48
O2 Sensor Extension 252, 257 PTFE Socket 48
INDEX

Wiring 246-248-250 Push Lock 51-53

Hat 423 Replacement Olive 84
Header Flange 397 Stainless Socket 84
Headers 399-400 Taper Style 40-45
Heads 206-221 Taper Style Socket 43
Heat Exchanger 265 Hose Finisher 22
Heat Guard Spark Plug Boot 272 Housing
Heat Shield 271, 274 Diff 294
Heat Wrap 270-271 Thermostat 266-268
Heater Hose 410 Turbine 364
Hi-Flow Thermostat 267 Hump Hose 408
Hobb Switch 258
Hood Hinges
Hoodie
231
423 I
Hose
100 Series 16 Ignition
120 Series 23, 54 Coil Bracket 238-239
200 Series 18, 23 Coil Extention Harness 239, 251
250 Series 19 Coil Harness 240, 251
400 Series 20, 51 Coil Plug 240, 251
450 Series 17 Coil 238-239
500 Series 21, 50 Firewall Feed Through 238
7000 Series 26 Heat Guard Spark Plug Boot 272
800 Series 19, 274 Lead 234-236
Air Conditioning 19, 274 Lead Assembly Tool 237
Black Braided Rubber 16 Lead Boot 235-237
Braided PTFE 18-19, 23 Lead Crimp Tool 237
Braided Rubber 16 Lead Markers 237
Breather 19 Lead/Wire Separator 237-238
Clamp 404 Terminal 235-236
Cutting Film 415 Wire 234-236
Heater 410 Injector
Hex Hose Finisher 22 Injector 194-196
Inner Support Spring 17, 26 Nozzle 389
In-Tank Fuel Hose 179 Plug 255
Kryptalon 26 Weld-on Bung 193, 392
Light Weight Braided PTFE 19 Wiring Adapter 252-255
Light Weight Braided Rubber 17 Inspection Cover 287
Non-Stick Cutting Film 26 Instructions

82 aeroflowperformance.com
 INDEX

Air Filter Cleaning 110-111 Muffler 401

Fitting Specification Chart 429
Hose Assembly
Kryptalon Assembly
434-435
26 N
Insulation 269-274
Intake Adapter 384 Nitrous
Intake Sensor Harness 252 Bottle Adapter 383
Intake Spacer 384 Bottle Bracket 382
Intercooler 380-381 Filter 382
Intercooler Clamp 405 Pressure Gauge 382
Inverted Flare Weld-in Nozzle Fitting 383
Inverted Flare to AN Adapter 73, 92 Non-Stick Cutting Film 26, 415
Union 84 NPS to AN Adapter 93
Isolator Switch 245 NPT
AN with NPT Tee 77

J
Barb to NPT 55-56
BSP to NPT Adapter 78
Coupler 69, 78
Jack - Qwik Lift 420 Expander 78
J-Bend 394 Extention 76
Jet Storage Plate 413 Hose End 37, 44
Metric to NPT Adapter 92

K
NPT to AN Adapter 74, 76-77, 91-92
NPT to Metric Adapter 86
NPT to NPT Adapter 76
Kick Down Cable 285 Plug 66, 68
Kick Down Lever 200 Reducer 78
Kit Electrical Connector 258-259 Tee 78
Kryptalon Union 66
Assembly Instructions 26 Weld-on 393
Hose 26 Number Plate Bolts/Light 259
Hose Cutter 26 Nut
Hose End 28-31 Air Cleaner 106
Replacement 31 Pinion 291
Replacement Olive 31 Nylon
Hose 54

L
Push to Connect Fitting 54

INDEX
Launch Control 93
Lead
Crimp Tool 415 O2 Extension Harness 252, 257
Separator 237-238 O2 Sensor 257
Leads - Ignition 234-236 O2 Weld-on Bung/Plug 392
Lifter Retaining Tool 414 Oil
Line Kit Bypass Plate 134
Gauge 260-261 Cooler Line Kit 134
Turbo Oil/Water Feed 366/367 Cooler 135-137
Line Lock 93 Cooler Adapters 72, 286
Line Support Bracket 367 Electric Oil Pump 135
Linkage Filler Cap 107
Arm 199 Pressure Adapter 135, 261
Ball 198, 201 Restrictor Kit 132
Blower Dual Carb Linkage Kit 199 Scavenge Filter 135
Locking Plate - Cam 205 Thermostat 133
Locking Tabs - Turbo 370 Oil Filter
Log - Fuel 168 Application Guide 112-129
Loom - Wiring 246, 248-250 Inline 165-167
Low Profile Car Ramp 419 Oil Filter Cutter 130
Relocation Kit 131

M
Remote Head 131, 133
Replacement 130
Re-usable/Universal 131
Magnetic Deck Bridge 413 Sandwich/Block Adapter 133-134
Magnetic Drain Plug 137 Scavenge Filter 135
MAP Sensor 256 Thread Guide 132
Map Sensor Delete 384 Oil Pan
Merge Collector 399 Accessories 142
Metric Baffle Insert 137
Extention 69 Conversion 139
Metric to AN Adapter 70, 73 Drain Plug 137
Metric to NPT Adapter 84, 92 Replacement 138
Port Plug 67 Super Oil Pan 140-145
Washer 58, 80, 91 Windage Tray 137
Weld-on 393 Oil Pump Primer Tool 413
Missile Switch 245 Olive
Morse Cable Accessories 200-201 Air Conditioning 275
Morse Cable 201 Hard Line 162

aeroflowperformance.com 93
 INDEX

Installation Tool 417 PTFE

Kryptalon 31 Braided Hose 18-19, 23
PTFE 48 Hose 80
PTFE Hose End 84 Hose Cutter 81
ORB Hose End 45-50
Barb to ORB 57 Olive Installation Tool 417
Coupler 68-69 Socket 48
Extention 69 Stainless Hose End 84-85
Hose End 37, 44-45 Steel Hose End 84
ORB to AN Adapter 68-71 Washer 58, 80
Port Plug 67-68 Pulley
Tee 62 Gilmer 225
Weld-on 393 Spacer 224
O-ring Supercharger 384
O-rings 70, 80 V-Pully 226
Air Conditioning 274 Pump
Turbo Housing 369 Bracket 181
Diesel 179

P EFI
EFI Fuel Pump Adapter
173-179
185
EFI Fuel Pump Silencer 180
Padding - Roll Bar 387 EFI Pump Accessories 182
Pan Electric Oil Pump 135
Engine Oil 138-145 Fuel Pump Banjo 180
Transmission 283-285 Fuel Pump Block Off Plate 204
Panel Filter 96-98 Fuel Pump Inlet Screen 180
Parachute Release Cable Kit 388 Low Pressure Electric Fuel 172-173
Parachute Safety Flag 388 Water 263
P-Clamp 24-25, 82, Push Lock
163-164 Hose 20-21, 50-51
PCV Valve 107 Hose End 51-53
Pie Cut 395 Male to Male Barb Adapter 56
Pinion Bearing Kit 291 Push to Connect
Pinion Nut 291 Fitting 54
Pinion Seal 291 Hose 54
Pinion Shim Kit 292 Pushrod Length Checking Tool 414
Pinion Support 291

Q
Pipe Beading Tool 163, 403, 418
Pipe Cutter 81, 163, 418
INDEX

Piston Ring Filler 414

Pliers - Aero Clamp 21, 412 Quick Disconnect Tool 187, 415
Plug Quick Release Fitting 79, 83-84
Alternator 241 Qwik Lift Vehicle Jack 420
AN Flare 67

R
Coil 240
Dust Cap & Plug Kit 416
Ethanol Content Sensor 256
Fuel Bowl Blank-Off 169 Radiator
Injector 255 Cap 269
Metric Port 67 Cap Cover 268
NPT 66, 68 Weld-on Neck 391
ORB 67-68 Radiator Filter 266
Power Valve Blanking 168 Radiator Hose Adapter 265, 268
Pressure Sensor 255 Radiator Overflow Tank 146-148
TPS 255 Ratchet Shifter 278-280
Turbo Plumb Back Block Off 377 Reducer
Vacuum Blank Off 405 NPT 78
Zinc Anode Plug 268 Silicone 408-409
Plumb Back Adapter 377 Regulator
Pod Filter 100-101 EFI Fuel Pressure 184
Portable Air Tank 388 Fuel Pump - Carb 171-172
Power Feed - Fuse 247 Standard F/P Regulator Adapter 193
Power Steering Relay 247
Adapter Fitting 227 Relay & Wiring Kit
Control Valve 150 Fan 246, 262
Cooler 137 Universal 247
Flow Control Valve 226 Relief Valve 385
Pump Bracket 227 Relocation Kit - Oil Filter 131
Pump Delete Bracket 226 Remote oil Filter Head 131, 133
Tanks 150-151 Reservoir
Power Valve Blanking Plug 168 Brake Vaccum 94
Power Window Kit 259 Brake/Clutch 93
Pressure Gauge 197, 260 Power Steering 150-151
Pressure Sensor 255 Restrictor - Turbo 367
Pressure Sensor Block 256 Restrictor Kit - Oil 132
Pressure Test Kit 416 Restrictor Plate Kit 266
Pressure Test Tag 416 Return Spring 199-200
Proportioning Valve 94 Ring Gear Bolts 293

102 aeroflowperformance.com
 INDEX

Rocker Covers Banjo Bolt 90

Billet 224 Banjo 89-90
Fabricated 223-224 Bend 394
Grommet 223 Brake Fitting 86-93
Stamped Steel 222-223 Bulkhead Nut 85
Rocket Launcher Switch 245 Bulkhead 85
Roll Bar Padding 387 Catalytic Converter 400
Roll Over Valve 160 Donut 395
Flange 396-397
Flexible Joint 395
S Hard Line
Hose End
23-24, 80, 161
84-85

Sacraficial Anode 268 J-Bend 394
Sandwich Adapter 133 Merge Collectors 399
Sandwich Plate 287 Muffler 401
Scavenge Filter 135 Pie Cut 395
Screen - Turbo Protector 372 Tee 85, 87-89
Seal - Pinion 291 Through Frame Fitting 92
Seal Alignment Tool 414 T-Pipe 394
Seat Cover 422 Transition Cone 394
Sensor Tube 393-395
Compressor Wheel Speed 371 Tube Nut 84
Compressor Wheel Speed Kit 371 Tube Sleeve 84
Ethanol Content 256 U-Bend 394
MAP 256 Union 84-85
Map Sensor Delete 384 X-Pipe 395
Pressure 255 Y-Pipe 394
Temperature 256 Stainless Steel Braided Cover 22
Wideband O2 257 Starter Motor Heat Shield 273
Separator Starter Motor Service Parts 243
Hose 24-25, 83, 164 Starter Motor 242-243
Lead/Wire 237-238 Stat-O-Seals 70, 80
Shears - Hose Cutting 417 Steel
Shifter AN Coupler 84
Accessories 281 Hard Line 23-24, 80
Adjustable 411 Hose End 84
Cable 282 Stubby Cooler 423
Drop Box 281 Stud
Spare 278-280 Air Cleaner 106

INDEX
Transmission 278-280 Carburettor 198
Shut Off Valve 165 Rocker 222
Silencer - EFI Fuel Pump 180 Sump
Silicone Conversion 139
Bend 407-409 Fuel Tank 159
Elbow 407-409 Replacement 138
Expander 408-409 Super Oil Pan 140-145
Heater Hose 410 Supercharger
Hose 406-410 Air Bleed 385
Hump Hose 408 Belt Guard 385
Reducer 408-409 Burst Panel Deflector Shield 385
Vacuum Hose 409 Coupler 384
Singlet 424 Map Sensor Delete 384
Snap-Lock Ties 271 Pulley 384
Socket Relief Valve 385
100/150 Series 43 Stud Kit 385
200/570 Series 48 Vacuum Delete Plug 384
500/550/880 Series 39 Gasket 383
Cutter Style 39 Spacer 383-384
Kryptalon 31 Supercharger Water Fitting Adapter 264
PTFE 48 Surge Tank 152-154, 181-183
Taper Style 43 Switch
Spacer Battery Isolator 245
Carburettor 198 Engine Start 245
Fan 226 Fan 261
Fuel Injector 194 Hobb 258
Pulley 224 Missile 245
Supercharger 384 Neutral/Reverse Safety 281
Universal 391 Panel 245
Water Neck 266 Toggle 245
Spanner 412
Spool
Spring
292
T
Hose Inner Support 17, 26
Wastegate 374-375 Tags - Pressure Test 416
Wastegate Actuator 372 Tailshaft Loop 291
Spring Perches 295 Tank End 404
Sprintcar Accessories 389 Tank
Stainless Bleeder Setting 389
Brake Vaccum 94

aeroflowperformance.com 11
3
 INDEX

Breather 148-149
Guard Cover 422
Dry Sump 148
Hardline Pipe Cutter 82, 418
Expansion 146-147
Harmonic Balancer 414
Fuel 154-156
Hose Cutter 417
Fuel Cooler 151, 181
Ignition Lead Assembly Tool 237
Fuel Sender Unit 159
Jet Storage Plate 413
Fuel Tank Accessories 159-160
Kryptalon/400/500 Series Hose Cutters 26
Fuel Tank Sump 159
Lead Crimp Tool 237
Header 147
Lifter Retaining 414
Portable Air Tank 388
Low Profile Car Ramps 419
Power Steering 150-151
Magnetic Deck Bridge 413
Radiator Overflow 146-148
Oil Filter Cutter 130
Remote Filler 159
Oil Pump Primer 413
Safety Foam 160
Pipe Beading 163, 403, 418
Spill Tray 159
Pipe Cutter 81
Surge 152-154, 181-183
Piston Ring Filer 414
Universal 151
Pressure Test Kit 416
Windscreen Washer 146
PTFE Hose Cutter 81
Tape - Hose Cutting 415
PTFE Olive Installation Tool 417
T-Bolt Clamp 404
Pushrod Length Checking 414
Technical Information 429-435
Qwik Lift Vehicle Jack 420
Tee
Seal Alignment 414
AN 61-62
Seat Cover 422
AN Stepped 78
Shifter 411
AN with NPT 77
Spanner 412
Barb 56
Thread Identification Kit 413
Bulkhead 61
Top Dead Centre 413
NPT 78
Trolley 420
ORB 62
Tube Bender 81, 417-418
Stainless 85, 87-89
Tube Straightening Tool 163, 418
Teflon - See PTFE
Vice Jaw 411
Temperature Sensor 256
Wheelie Bar Adjustment 411
Tensioner
Wire Stripper 415
Adjustable Heim-Joint 230
Wrench 411-412
Belt 227
Top Dead Centre Tool 413
Terminal
T-Piece 409
Battery 245
T-Pipe 394
Electrical Bulkhead 247
Transition Cone
INDEX

Ignition 235-236
Aluminium 402
Thermostat 267
Stainless 394
Thermostat - Oil 133
Transmission
Thermostat Housing 266-268
Adapter 72, 286
Thread Identification Kit 413
Bracket & Lever Kit 281
Thread Paste 415
Dipstick 282
Throttle Body 188-189
Flexplate 287-289
Throttle Cable 198-199
Flow Control Valve 287
Through Frame Bulkhead 60
Pan 283-285
Through Frame Fitting 92
Pan Gasket 285
Thrust Button 204
Shifter 278-280
Thrust Plates - Cam 204
Shifter Spares 278-280
Ties - Heat Wrap 271
Universal Joint 290
Timing Cover 202-203
Universal Joint Girdle 290
Timing Pointer 203-204
Yoke 289
Toggle Switch 245
Trolley 420
Tool
T-Shirt 424-428
Aero Clamp Pliers 21, 412
Tube
Barricade Roller Applicator 272
Adapter 161-162
Chassis Stand 421
Aluminium 402-403
Coil Over 413
Bender 417-418
Creeper 420
Stainless 393-395
Crimp Tool 415
Tube Bender 81
Deburring 417
Tube Nut
Degree Wheel 417
Aluminium 163
Depinning Tool 251
Stainless 84
Differential Assembly Stand 419
Tube Sleeve
Dzus Fastener 413
Aluminium 163
E85 Content Tester 416
Stainless 84
EFI Disconnect 415
Tube Straightening Tool 163, 418
EFI Quick Disconnect Tool 187
Turbo
Engine Cradle 421
Accessories 364-372
Engine Crane 421
Adapter 369
Engine Leveling Tool 420
Bag/Blanket 269, 364-365
Engine Lift Plate 420
Bellmouth 371
Engine Stand 421
Block Off Plugs 377
Engine Support Bar 420
Blow Off Valve Adapter 377
Flaring 81, 418-419
Blow Off Valve 376
Flush Cutter 415

122 aeroflowperformance.com
 INDEX

Boost Controller 378-379 Vent - Fuel Cell Rollover 160

Break in Lubricant 366 Vice Jaw 411
Compressor Wheel Speed Sensor 371 V-Pulley 226
Compressor Wheel Speed Sensor Kit 371
Drain Bulkhead
Drain Gasket
369
368 W
Drain Hose 368 Washer
Drain Kit 368 Aluminium 80
Drain 369 Aluminium 91
Fitting 366 BSPP 80
Flange 396 Metric 80
Gasket 370 PTFE 80
Housing O-Ring 369 PTFE & Aluminium 58
Intercooler 380-381 Washer Seal to AN Adapter 92
Line Support Bracket 367 Wastegate
Locking Tab 370 Actuator Spring 372
Oil Filter 367 Actuator 372
Oil/Water Feed Line Kit 366-367 Bag/Blanket 270, 375
Plumb Back Adapter 377 Spares 373
Protector Screen 372 Spring 374-375
Restrictor 367 Wastegate 373
Spares 296-363 Water Neck Spacer 266
Studs 369 Water Neck 266-268
Timer 378 Water Pump - Electric 263
Turbine Housing 364 Water Pump Plate 264
Turbos 296-363 Weatherpack
V-Band Clamp 365 Fuse Holder 247
Wastegate Actuator 372 Relay 247
Tyre Cover 387 Weld-on
AN fitting 392

U Barb
Differential Filler
391
392
EGT Bung/Cap 392
U-Bend Filler Cap 390-391
Aluminium 403 Injector Bung 392
Stainless 394 Metric 393
Union Nitrous Nozzle Fitting 383
AN 64-66 Nozzle Fitting 392

INDEX
Inverted Flare 84 NPT 393
Stainless 84-85 O2 Sensor Bung/Plug 392
Universal Joint 290 ORB 393
Universal Joint U-Bolt 290 Radiator Neck 391
Weld-on Lifesaver 84

V
Welsh Plug Kit 205
Wheel Studs 295
Wheelie Bar Adjustment Tool 411
Vaccum Pump Kit - Brake 95 Wheelie Bar Wheel 387
Vacuum Wideband Sensor 257
Blank Off Plug 405 Windage Tray 137
Hose 409 Windscreen Washer Tank 146
Spring Clamp 404 Wire
Valve Separator 237-238
Air Conditioning 275 Crimp Tool 415
Brake Booster 94 Wire & Hose Over Wrap 271
Brake Proportioning 94 Wire Stripper 415
Brake Residual Pressure 94 Wires - Ignition 234-236
Check 167 Wiring Harness 246, 248-250
Check/Roll Over 160 Wrenches 411-412
Drain 391

X
EFI Check Valve 180
Engine 222
Exhaust Control 400
Lock 222 X-Pipe 395
PCV 107
Power Steering Control 150
Power Steering Flow Control
Shut Off
226
165
Y
Spring Retainer 222 Y-Block 62-63
Spring 222 Yoke 289-290
Supercharger Relief 385 Y-Pipe 394
Valve Covers
Billet 224
Fabricated
Grommet
223-224
223
Z
Stamped Steel 222-223 Zinc Anode Plug 268
V-Band Clamp 365

aeroflowperformance.com 13
3
 FITTING SPECIFICATIONS

AEROFLOW HOSE END BREAKDOWN

Aeroflow hose ends are made from 6061 T-6 aluminum which surpass or meet minimums required for AN style
aerospace hose end specifications. All hose ends are JIC 37 Degree and come with a double Viton O-ring which allows
360 degree rotation while providing a leak free performance when used in a range of applications. All blue & black
fittings are hard anodised for superior wear resistance, corrosion resistance and colour consistency. All hose ends
come with Stainless steel lock wire pins.

100 SERIES TAPER HOSE ENDS

Aeroflow’s 100 Series Taper fittings are a braised full flow fitting with a taper design that provides straight through
connection with easy alignment upon assembly a tube end that compresses the hose into a purpose designed socket
allowing for a leak free fitting. All angles are mandrel bent, eliminating sharp changes in direction for optimum flow. Our
100 Series fittings allows 360 Degree rotation to allow for easy adjustment making them and an excellent choice for the
automotive enthusiast for use in fuel systems, cooling systems, vacuum applications and oil systems.
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

150 SERIES FULL FLOW TAPER HOSE ENDS

Aeroflow’s 150 Series Taper fittings are a CNC machined one piece fitting which provide uninterrupted flow. The taper
design that provides straight through connection with easy alignment upon assembly a tube end compresses the hose
into a purpose designed socket allowing for a leak free fitting. The tight mandrel bent radius body has superior wall
thickness and a swivel head allowing 360 Degree rotation to allow for easy adjustment. Aeroflow’s 150 series fittings
are a must for any serious racer for use in fuel systems, cooling systems, vacuum applications and oil systems.
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

500 SERIES CUTTER HOSE ENDS

Aeroflow’s 500 series cutter fittings are a braised full flow fitting. The billet cutter end separates the wire braid for
maximum hose retention, sealing the hose for a second time, which provides a greater sealing area for strength and
easier assembly. All angles are mandrel bent, eliminating sharp changes in direction for optimum flow. Aeroflow’s 500
Series fittings have a swivel head to allow for easy adjustment making them an excellent choice for the automotive
enthusiast for use in fuel systems, cooling systems, vacuum applications and oil systems.
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

550 SERIES FULL FLOW CUTTER HOSE ENDS

Aeroflow’s 550 Series cutter fittings are a CNC machined one piece fitting which provide uninterrupted flow. The billet
cutter end separates the wire braid for maximum hose retention, sealing the hose for a second time which provides a
greater sealing area for strength and easier assembly. The tight mandrel bent radius body has superior wall thickness
and a swivel head allowing for easy adjustment. Aeroflow’s 550 series fittings are the choice of professionals for use in
fuel systems, cooling systems, vacuum applications and oil systems.
FITTING INDEX

Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

400 SERIES PUSH LOCK HOSE ENDS

Aeroflow’s 400 series push lock fittings are a mandrel bent braised full flow fitting with a custom designed barbed end
to allow a quick, easy and leak free assembly. Aeroflow’s push lock fittings come with a purpose designed cover to hide
the messy cut end of the hose to give you that professional look everytime. Clamps must be used in all applications.
Compatible Hose: 400 & 500 Series Push lock hose (Blue/Black)
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

510 SERIES FULL FLOW PUSH LOCK HOSE ENDS

Aeroflow’s 510 series push lock fittings are a CNC machined one piece fitting which provide uninterrupted flow. The
mandrel bent tight radius body has superior wall thickness with a custom designed barbed end to allow a quick, easy
and leak free assembly. Aeroflow’s push lock fittings come with a purpose designed cover to hide the messy cut end of
the hose to give you that professional look everytime. Clamps must be used in all applications.
Compatible Hose: 400 & 500 Series Push lock hose (Blue/Black)
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

200 SERIES PTFE (Teflon®) HOSE ENDS

Aeroflow’s 200 Series PTFE fittings are a braised full flow fitting. The purposely designed olive compresses into the
PTFE (Teflon) inner tube for easy, leak free assembly. All angles are mandrel bent, eliminating sharp changes in
direction for optimum flow. Our 200 Series fittings allows 360 Degree rotation to allow for easy adjustment making
them an excellent choice for the automotive enthusiast for use in power steering, automatic transmission, nitrous, fuel
systems, cooling systems, vacuum applications, oil systems, brake and clutch lines.
We recommend the 200, 250 series in E85 applications.
Compatible Hose: 200, 250 Series PTFE (Teflon) S/S hose
• Hard Anodised (excluding silver)

570 SERIES FULL FLOW PTFE (Teflon®) HOSE ENDS

Aeroflow’s 570 Series PTFE fittings are a CNC machined one piece fitting which provide uninterrupted flow. The
purpose designed olive compresses into the PTFE (Teflon) inner tube for easy, leak free assembly. The mandrel bent
tight radius body has superior wall thickness and a swivel head allowing for easy adjustment. Aeroflow’s 570 series
fittings are the choice of professionals for use in power steering, automatic transmission, nitrous, fuel systems, cooling
systems, vacuum applications, oil systems, brake and clutch lines.
We recommend the 200, 250 series hose in E85 applications
Compatible Hose: 200, 250 Series PTFE (Teflon) S/S hose
• Hard Anodised (excluding silver)

KRYPTALON® HOSE ENDS

Aeroflow’s Kryptalon series fittings are a one piece big bore fitting which provide uninterrupted flow. The unique
patented compression style olive technology makes for an easy, leak free assembly. All angles are mandrel bent,
eliminating sharp changes in direction for optimum flow. Aeroflow’s Kryptalon series fitting allows 360 Degree rotation
to allow for easy adjustment. Aeroflow’s Kryptalon series fittings are NHRA arproved so they are the choice of
professionals for use in E85, E10, methanol, nitro, oils, lubricants and coolant systems
• Designed to work with Kryptalon large bore lightweight hose only
• Hard Anodised
14 aeroflowperformance.com
HOSE SPECIFICATIONS

100 SERIES STAINLESS STEEL BRAIDED HOSE

• Aeroflow Performance Product’s most popular racing hose
• Double braided stainless hose that uses the highest quality 308 stainless wire available
• Excellent abrasion resistance
• Available in optional gloss black electroplated finish
• Smooth bore Chlorinated Polyethylene (CPE) synthetic rubber inner liner
• Excellent pressure rating 1000PSI (-4 to -12)
• Minimum temperature -40 deg C, maximum temperature 150 deg C
• Use inner coil support spring for vacuum applications
Applications: Fuel, lube, coolant and air lines
Compatible Hose Ends: 100, 150, 500, 550 and 880 Series reusable Hose Ends

450 SERIES NYLON BRAIDED HOSE

• Constructed with a braided nylon outer shield for abrasion resistance
• A flexible 308 stainless steel inner core for superior strength embedded into liner
• Smooth bore Chlorinated Polyethylene (CPE) synthetic rubber inner liner
• Up to 40% lighter than stainless steel braided hose
• Excellent pressure rating 1000PSI (-4 to -12)
• Minimum temperature -40 deg C, maximum temperature 150 deg C
• Use inner coil support spring for vacuum applications
Applications: Fuel, lube, coolant and air lines
Compatible Hose Ends: 100, 150, 500, 550 and 880 Series reusable Hose Ends

400 SERIES HOSE

• Easy to assemble with reusable push lock hose ends
• Clamps must be used for all pressure applications.
• Smooth bore Chlorinated Polyethylene (CPE) synthetic rubber inner liner
• Available in nylon reinforced blue or black outer cover
• Minimum temperature -40 deg C, maximum temperature 100 deg C
• Working pressure 250PSI (17 Bar)
• Available in sizes -4 to -12 BE CAUTIOUS
Applications: • Fuel, lube, coolant and air lines
• Use inner coil support spring for vacuum applications It Is NOT recommended to mix and
Compatible Hose Ends: 400, 510 Series reusable Hose Ends match fittings and hose from different
manufacturers. Each manufacturer uses
their own specific tolerances. Mixing
500 SERIES HOSE brands may cause difficulty in assembly
• Easy to assemble with reusable push lock hose ends resulting in lack of grip between the
• Clamps must be used for all pressure applications. fitting and hose which may cause the
• Textured Chlorinated Polyethylene (CPE) synthetic rubber outer liner connection to fail. This will void any

HOSE INDEX
• Nylon reinforced inner layer warranty.
• Minimum temperature -40 deg C, maximum temperature 125 deg C
• Working pressure 290PSI (20 Bar)
• Available in sizes -4 to -12
Applications: • Fuel, lube, coolant, air lines, power steering and transmission cooler lines
• Use inner coil support spring for vacuum applications
Compatible Hose Ends: 400, 510 Series reusable Hose Ends

200 SERIES HOSE

• 308 Stainless steel outer braid for abrasion resistance
• Available in optional gloss black electroplated finish
• PTFE smooth bore inner liner that resists leaks and fumes
• Rated up to 4000PSI and down to 1000PSI for -20 size
• Minimum temperature -70 deg C, maximum temperature 250 deg C
• Excellent for vacuum applications, for high vacuum applications an inner coil support spring is recommended
Applications:
• Off road brake, transmission, clutch, gauge, N2O, power steering, Hydraulic, fuel, lube, coolant and air lines
Compatible Hose Ends: 200, 570 Series reusable Hose Ends

250 SERIES HOSE

• Black nylon outer braid, reinforced with a inner 308 stainless
• PTFE smooth bore inner liner that resists leaks and fumes
• Rated up to 4000PSI and down to 1000PSI for -20 size
• Minimum temperature -70 deg C, maximum temperature 200 deg C
• Excellent for vacuum applications, for high vacuum applications an inner coil support spring is recommended
Applications: Off road brake, clutch, gauge, N2O, power steering, Hydraulic, fuel, lube, coolant and air lines
Compatible Hose Ends: 200, 570 Series reusable Hose Ends

KRYPTALON HOSE
• Larger bore than regular AN hose for greater flow capacity
• Smooth bore and ultra-flexible convoluted outer liner, most flexible PTFE lined hose Aeroflow Performance offers
• Ultra-light weight and flame retardant Kevlar braided outer cover
• No special tools required, simply use Aeroflow adjustable alloy wrenches to assemble
• Minimum temperature -70 deg C, maximum temperature 260 deg C
• Excellent for vacuum applications, for high vacuum applications an inner coil support spring is recommended
Applications: • Off road brake, transmission, clutch, gauge, N2O, power steering, Hydraulic, fuel, Nitromethane, lube,
coolant and air lines
Compatible Hose Ends: Kryptalon Series reusable Hose Ends

aeroflowperformance.com 15
 BRAIDED HOSE

ComE85
pati
b le

Note: Please ensure all

hose is thoroughly cleaned
out before use.

Note: Use inner coil support spring on all tight radius bends and inlet / suction side of any pump.

The Aeroflow 100 series hose is a true double braided stainless hose that uses the highest quality stainless wire available.
• Constructed with a stainless steel outer braid that resists abrasion and corrosion.
• Combined with a reinforced Chlorinated Polyethylene (CPE) synthetic rubber liner with a nylon inner braid.
• For use with fuel systems, E85, E10, methanol, oils, lubricants, coolant systems and vacuum applications.
• Minimum temperature -40oC (-40oF), Maximum temperature 150oC (302oF).
Note. Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hoses compatibility with all fuels unless otherwise stated.
We recommend the use of Aeroflows PTFE series hose for all other types of fuels.
NOT RECOMMENDED FOR: Brake systems, transmissions, power steering, extreme heat areas and use inside passenger compartments (due to
permeation). For these applications use 200 Series Hoses & compatible fittings.

100 SERIES STAINLESS STEEL BRAIDED HOSE (suits 100, 150, 500, 550 & 880 series fittings)
AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-4 AF100-04-1M AF100-04-2M AF100-04-3M AF100-04-4.5M AF100-04-6M AF100-04-15M
-5 AF100-05-1M AF100-05-2M AF100-05-3M AF100-05-4.5M AF100-05-6M
HOSE & TUBE

-6 AF100-06-1M AF100-06-2M AF100-06-3M AF100-06-4.5M AF100-06-6M AF100-06-15M AF100-06-30M

-7 AF100-07-1M AF100-07-2M AF100-07-3M AF100-07-4.5M AF100-07-6M
-8 AF100-08-1M AF100-08-2M AF100-08-3M AF100-08-4.5M AF100-08-6M AF100-08-15M AF100-08-30M
-9 AF100-09-1M AF100-09-2M AF100-09-3M AF100-09-4.5M AF100-09-6M
-10 AF100-10-1M AF100-10-2M AF100-10-3M AF100-10-4.5M AF100-10-6M AF100-10-15M AF100-10-30M
-12 AF100-12-1M AF100-12-2M AF100-12-3M AF100-12-4.5M AF100-12-6M AF100-12-15M AF100-12-30M
-16 AF100-16-1M AF100-16-2M AF100-16-3M AF100-16-4.5M AF100-16-6M AF100-16-15M
-20 AF100-20-1M AF100-20-2M AF100-20-3M AF100-20-4.5M AF100-20-6M

BLACK 100 SERIES STAINLESS STEEL BRAIDED HOSE (suits 100, 150, 500, 550 & 880 series fittings)
AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-4 AF100-04-1MBLK AF100-04-2MBLK AF100-04-3MBLK AF100-04-4.5MBLK AF100-04-6MBLK AF100-04-15MBLK
-5 AF100-05-1MBLK AF100-05-2MBLK AF100-05-3MBLK AF100-05-4.5MBLK AF100-05-6MBLK
-6 AF100-06-1MBLK AF100-06-2MBLK AF100-06-3MBLK AF100-06-4.5MBLK AF100-06-6MBLK AF100-06-15MBLK AF100-06-30MBLK
-7 AF100-07-1MBLK AF100-07-2MBLK AF100-07-3MBLK AF100-07-4.5MBLK AF100-07-6MBLK
-8 AF100-08-1MBLK AF100-08-2MBLK AF100-08-3MBLK AF100-08-4.5MBLK AF100-08-6MBLK AF100-08-15MBLK AF100-08-30MBLK
-9 AF100-09-1MBLK AF100-09-2MBLK AF100-09-3MBLK AF100-09-4.5MBLK AF100-09-6MBLK
-10 AF100-10-1MBLK AF100-10-2MBLK AF100-10-3MBLK AF100-10-4.5MBLK AF100-10-6MBLK AF100-10-15MBLK AF100-10-30MBLK
-12 AF100-12-1MBLK AF100-12-2MBLK AF100-12-3MBLK AF100-12-4.5MBLK AF100-12-6MBLK AF100-12-15MBLK AF100-12-30MBLK
-16 AF100-16-1MBLK AF100-16-2MBLK AF100-16-3MBLK AF100-16-4.5MBLK AF100-16-6MBLK AF100-16-15MBLK
-20 AF100-20-1MBLK AF100-20-2MBLK AF100-20-3MBLK AF100-20-4.5MBLK AF100-20-6MBLK

100 & 450 Series Hose Specifications 100 Series Hose 450 Series Hose
AN I.D. O.D. Operating Press Burst Press Operating Press Burst Press
PSI BAR PSI BAR PSI BAR PSI BAR
-4 5.4mm 7/32” 11.2mm 7/16” 1000 68.95 6000 413.68 500 34.47 2000 137.89
-5 6.4mm 1/4” 13.1mm 33/64” 1000 68.95 6000 413.68 500 34.47 2000 137.89
-6 8.7mm 11/32” 13.8mm 35/64” 1000 68.95 6000 413.68 500 34.47 2000 137.89
-7 9.6mm 3/8” 15.7mm 5/8” 1000 68.95 6000 413.68 500 34.47 2000 137.89
-8 11.1mm 7/16” 17.7mm 11/16” 1000 68.95 5000 344.74 500 34.47 2000 137.89
-9 12.7mm 1/2” 18.3mm 23/32” 1000 68.95 5000 344.74 500 34.47 2000 137.89
-10 14.2mm 9/16” 20.8mm 53/64” 1000 68.95 5000 344.74 500 34.47 2000 137.89
-12 17.4mm 11/16” 23.9mm 61/64” 1000 68.95 3750 258.55 350 24.13 1400 96.53
-16 22.2mm 7/8” 30.5mm 13/64” 750 51.71 2500 172.37 350 24.13 1400 96.53
-20 28.5mm 1-1/8” 35.81mm 1-13/32” 500 34.47 2000 137.89 350 24.13 1400 96.53

16 aeroflowperformance.com
 BRAIDED HOSE

E85
Compa
tible

Note: Please ensure all hose is

thoroughly cleaned out before
Note: Use inner coil support spring on all tight radius bends and
use.
inlet / suction side of any pump.

450 Series Black Braided Light Weight Hose (suits 100, 150, 500, 550 & 880 series fittings)
The Aeroflow 450 Series hose is for performance and racing enthusiasts who want high quality light weight hose that is easier to assemble than traditional
braided steel hose.
• Constructed with a braided nylon outer shield for abrasion resistance.
• A Flexible stainless steel inner core for superior strength embedded in the Chlorinated Polyethylene (CPE) synthetic rubber liner.
• For use with fuel systems, E85, E10, methanol, oils, lubricants, coolant systems and vacuum applications.
• Minimum temperature -40oC (-40oF), Maximum temperature 150oC (302oF).
Note. Recommended for pump fuel. Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hoses compatibility with all fuels.
We recommend the use of Aeroflows PTFE series hose for all race blend fuels.
NOT RECOMMENDED FOR: Brake systems, transmissions, power steering, extreme heat areas and use inside passenger compartments (due to permeation).
For these applications use 200 Series Hose

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-4 AF450-04-1M AF450-04-2M AF450-04-3M AF450-04-4.5M AF450-04-6M AF450-04-15M AF450-04-30M
-5 AF450-05-1M AF450-05-2M AF450-05-3M AF450-05-4.5M AF450-05-6M AF450-05-15M

HOSE & TUBE

-6 AF450-06-1M AF450-06-2M AF450-06-3M AF450-06-4.5M AF450-06-6M AF450-06-15M AF450-06-30M
-7 AF450-07-1M AF450-07-2M AF450-07-3M AF450-07-4.5M AF450-07-6M
-8 AF450-08-1M AF450-08-2M AF450-08-3M AF450-08-4.5M AF450-08-6M AF450-08-15M AF450-08-30M
-9 AF450-09-1M AF450-09-2M AF450-09-3M AF450-09-4.5M AF450-09-6M
-10 AF450-10-1M AF450-10-2M AF450-10-3M AF450-10-4.5M AF450-10-6M AF450-10-15M AF450-10-30M
-12 AF450-12-1M AF450-12-2M AF450-12-3M AF450-12-4.5M AF450-12-6M AF450-12-15M AF450-12-30M
-16 AF450-16-1M AF450-16-2M AF450-16-3M AF450-16-4.5M AF450-16-6M AF450-16-15M
-20 AF450-20-1M AF450-20-2M AF450-20-3M AF450-20-4.5M AF450-20-6M AF450-20-15M

INNER SUPPORT SPRING FOR REINFORCING HOSES FOR

100, 400 & 450 SERIES HOSE VACUUM APPLICATIONS
Recomended for use with all Aeroflow hose. A Support Spring is One of the most extreme applications for a hose is when being
recommended for suction applications or when very tight bends must be made. used in vacuum applications. It is particularly important that you
Made from Stainless Steel. select the correct hose for your application. Great care should be
taken in setting up and handling of hoses used in vacuum applica-
tions, free-flowing bends are preferred to tight radius and where
AN Part No Length possible vacuum hoses should be kept away from major heat
sources. If a hose is installed with a radius tighter than the minimum
-6 AF450-06-SUPP 1.2m / 3ft 11-1/4” bend radius or if a hose has been damaged and/or kinked, the tight
-8 AF450-08-SUPP 1.2m / 3ft 11-1/4” radius and/or the damaged/kinked area will be a weak point creat-
-10 AF450-10-SUPP 1.2m / 3ft 11-1/4” ing a potential restriction and the ability to correctly operate with
-12 AF450-12-SUPP 1.2m / 3ft 11-1/4” vacuum will be reduced. For tight radius bends and high vacuum
-16 AF450-16-SUPP 1.2m / 3ft 11-1/4” applications, an inner coil support spring must be used.
-20 AF450-20-SUPP 1.2m / 3ft 11-1/4”

aeroflowperformance.com 17
 PTFE (TEFLON) BRAIDED HOSE

Note: Please ensure all hose is

thoroughly cleaned out before use.

The Aeroflow 200 series hose has a PTFE inner liner with 308 stainless steel braid. It is a durable and professional hose that resists leaks and fumes. It is rated
up to 4000PSI (275.79Bar).
• Stainless steel outer cover for excellent abrasion resistance.
• Recommended for Brake, E85, Alcohol, Nitro, Diesel fuels, transmission, clutch, nitrous, power steering, oiling, hydraulics & vacuum applications.
• Minimum temperature -70oC (-94oF), Maximum temperature 250oC (482oF).

200 SERIES PTFE (Teflon®) STAINLESS STEEL BRAIDED HOSE

(suits 200 series fittings) (-3 and -4 suits brake fittings, NOT ADR or DOT approved)
AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”

-3 AF200-03-1M AF200-03-2M AF200-03-3M AF200-03-4.5M AF200-03-6M AF200-03-15M AF200-03-30M

HOSE & TUBE

-4 AF200-04-1M AF200-04-2M AF200-04-3M AF200-04-4.5M AF200-04-6M AF200-04-15M AF200-04-30M

-6 AF200-06-1M AF200-06-2M AF200-06-3M AF200-06-4.5M AF200-06-6M AF200-06-15M AF200-06-30M
-8 AF200-08-1M AF200-08-2M AF200-08-3M AF200-08-4.5M AF200-08-6M AF200-08-15M AF200-08-30M
-10 AF200-10-1M AF200-10-2M AF200-10-3M AF200-10-4.5M AF200-10-6M AF200-10-15M AF200-10-30M
-12 AF200-12-1M AF200-12-2M AF200-12-3M AF200-12-4.5M AF200-12-6M AF200-12-15M AF200-12-30M
-16 AF200-16-1M AF200-16-2M AF200-16-3M AF200-16-4.5M AF200-16-6M AF200-16-15M
-20 AF200-20-1M AF200-20-2M

BLACK 200 SERIES PTFE (Teflon®) STAINLESS STEEL BRAIDED HOSE

(suits 200 series fittings) (-3 and -4 suits brake fittings NOT ADR or DOT approved)

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3M / 9ft 10-1/8” 4.5AF200-03-4.5MBLK

M / 14ft 9-3/16” 6AF200-03-6MBLK
M / 19ft 8-1/4” M / 49ft 2-9/16” 30
15AF200-03-15MBLK M / 98ft 5-1/8”
-3 AF200-03-1MBLK AF200-03-2MBLK AF200-03-3MBLK AF200-03-30MBLK
-4 AF200-04-1MBLK AF200-04-2MBLK AF200-04-3MBLK AF200-04-4.5MBLK AF200-04-6MBLK AF200-04-15MBLK AF200-04-30MBLK
-6 AF200-06-1MBLK AF200-06-2MBLK AF200-06-3MBLK AF200-06-4.5MBLK AF200-06-6MBLK AF200-06-15MBLK AF200-06-30MBLK
-8 AF200-08-1MBLK AF200-08-2MBLK AF200-08-3MBLK AF200-08-4.5MBLK AF200-08-6MBLK AF200-08-15MBLK AF200-08-30MBLK
-10 AF200-10-1MBLK AF200-10-2MBLK AF200-10-3MBLK AF200-10-4.5MBLK AF200-10-6MBLK AF200-10-15MBLK AF200-10-30MBLK
-12 AF200-12-1MBLK AF200-12-2MBLK AF200-12-3MBLK AF200-12-4.5MBLK AF200-12-6MBLK AF200-12-15MBLK AF200-12-30MBLK
-16 AF200-16-1MBLK AF200-16-2MBLK AF200-16-3MBLK AF200-16-4.5MBLK AF200-16-6MBLK AF200-16-15MBLK AF200-16-30MBLK
-20 AF200-20-1MBLK AF200-20-2MBLK

200 & 250 Series Hose Specifications

AN I.D. O.D. Operating Press Burst Press Maximum Bend Radius
-3 3.56 mm 9/64” 6.35 mm 1/4” 4000PSI 275.79 BAR 12000PSI 827.37BAR 37.5mm 1-1/2”
-4 4.83 mm 3/16” 7.62 mm 19/64” 4000PSI 275.79 BAR 12000PSI 827.37BAR 42.5mm 1-43/64”
-6 8.13 mm 21/64” 10.92 mm 27/64” 3000PSI 206.84 BAR 10000PSI 689.47 BAR 50.8mm 2”
-8 10.67 mm 27/64” 13.72 mm 35/64” 2500PSI 172.36 BAR 8000PSI 551.58BAR 55mm 2-11/64”
-10 12.95 mm 33/64” 16.00 mm 5/8” 2000PSI 137.89 BAR 6000PSI 413.68BAR 60mm 2-23/64”
-12 16.26 mm 41/64” 19.30 mm 49/64” 1000PSI 68.94 BAR 4000PSI 275.79BAR 95mm 3-3/4”
-16 22.35 mm 7/8” 26.16 mm 1-1/32” 1000PSI 68.94 BAR 3000PSI 206.84BAR 275mm 10-53/64”
-20 28.45 mm 1-1/8” 32.77 mm 1-9/32” 1000PSI 68.94 BAR 2500PSI 172.37BAR 575mm 22-41/64”

18 aeroflowperformance.com
 BRAIDED HOSE & BREATHER HOSE

250 SERIES PTFE (Teflon®)

BLACK BRAIDED HOSE
Aeroflow’s 250 Series hose is a durable, professional light weight option that resists leaks and
fumes. It is constructed from a PTFE inner liner, with a reinforced 308 Stainless Steel layer
wrapped in a black nylon outer braid for maximum appearance and abrasion resistance.

• Stainless Steel reinforced middle layer for maximum strength and burst pressure.
• Braided Nylon outer shield for abrasion resistance.
• Recommended for brake, E85, Alcohol, transmission, clutch, Nitrous, Power
Steering, Oil, Hydraulics and Vacuum applications.
• Minimum Temp -70oC (-94oF) , Maximum Temp 200oC (392oF).

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-3 AF250-03-1M AF250-03-2M AF250-03-3M AF250-03-4.5M AF250-03-6M AF250-03-15M AF250-03-30M
-4 AF250-04-1M AF250-04-2M AF250-04-3M AF250-04-4.5M AF250-04-6M AF250-04-15M AF250-04-30M
-6 AF250-06-1M AF250-06-2M AF250-06-3M AF250-06-4.5M AF250-06-6M AF250-06-15M AF250-06-30M
-8 AF250-08-1M AF250-08-2M AF250-08-3M AF250-08-4.5M AF250-08-6M AF250-08-15M AF250-08-30M
-10 AF250-10-1M AF250-10-2M AF250-10-3M AF250-10-4.5M AF250-10-6M AF250-10-15M AF250-10-30M
-12 AF250-12-1M AF250-12-2M AF250-12-3M AF250-12-4.5M AF250-12-6M AF250-12-15M AF250-12-30M

800 SERIES NYLON STAINLESS STEEL

AIR CONDITIONING HOSE
Aeroflow air conditioning hose has an attractive stainless steel outer braid
with a nylon inner tube for superior refrigerant performance.
• Suited for use with R-134a Refrigerant.
• Max operating pressure 500PSI 34.47BAR.

HOSE & TUBE

# 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 800 Series Hose Specifications
6 AF800-06-1M AF800-06-2M AF800-06-3M # Hose I.D. Hose O.D Max Bend Radius
8 AF800-08-1M AF800-08-2M AF800-08-3M 6 8.38mm 21/64” 11.17mm 7/16” 101.6mm 4”
10 AF800-10-1M AF800-10-2M AF800-10-3M 8 10.92mm 27/64” 13.71mm 35/64” 133.35mm 5-1/4”
10 13.46mm 17/32” 16mm 5/8” 165.1mm 6-1/2”

REINFORCED CLEAR PVC BREATHER HOSE

Aeroflow’s range of transparent PVC hoses are reinforced with a steel wire core to prevent kinking and
collapsing. These hoses are great for Breather, Overflow lines where you want to see exactly what’s
going on inside. Available in 12.7mm (1/2”), 15.875mm (5/8”), 19.05mm (3/4”), 25.4mm (1”), 38.1mm (1-
1/2”), 44.45mm (1-3/4”) and 50.8mm (2”) inside diameter sizes from 1m (3ft 3-3/8”) to 15m 49ft 2-9/16”
lengths. Operating temperature 5oC (41oF) to 70oC (158oF)

I.D. 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 6 M / 19ft 8-1/4”

Note: Push-on fittings available to
12.7mm / 1/2” AF315-012-1M AF315-012-2M AF315-012-3M AF315-012-6M suit 1” and 1-1/2” clear PVC hose.
15mm / 5/8” AF315-015-1M AF315-015-2M AF315-015-3M AF315-015-6M
19mm / 3/4” AF315-019-1M AF315-019-2M AF315-019-3M AF315-019-6M
25mm / 1” AF315-025-1M AF315-025-2M AF315-025-3M AF315-025-6M
32mm / 1-1/4” AF315-032-1M AF315-032-2M AF315-032-3M AF315-032-6M
38mm / 1-1/2” AF315-038-1M AF315-038-2M AF315-038-3M AF315-038-6M

STRAIGHT HOSE BARBS

AN to Barb Blue Black Silver
-16 to 25.4mm / 1” AF411-16 AF411-16BLK AF411-16S
-20 to 38.1mm / 1-1/2” AF411-20 AF411-20BLK AF411-20S

aeroflowperformance.com 19
 400 PUSH LOCK HOSE

SUBMERSIBLE
tions
For in-tank applicaFUE Inner L
iner
USING E85 & METHA
NOLLS
E85 & M
ethano
Compa l
tible

Note: Please ensure all

hose is thoroughly cleaned
out before use.

400 SERIES PUSH LOCK HOSE (suits 400 & 510 series hose ends)
Aeroflow 400 series push lock hose is designed for the use with our push-on fittings. Available in black and blue.

mps
More Cblale on
• For use with fuel systems, E85, E10, methanol, oils, lubricants, coolant systems and low pressure brake/clutch
reservoir line.

Availa 404
• Temp range -40oC (-40oF) to 100oC (212oF)
• Working pressure 250 PSI (17 BAR)

NOTE: ON OILING SYSTEMS AND ON ALL EFI FUEL

Page
SYSTEMS CLAMPS MUST BE USED TO SECURE HOSE ENDS.
NOT SUITABLE FOR SUBMERSIBLE APPLICATIONS USING UNLEADED FUELS.
Note. Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hoses
compatibility with all fuels unless otherwise stated.
We recommend the use of Aeroflows PTFE series hose for all other types of fuels.
NOTE: Use Aero clamps to secure hose to fittings. See page 21 or 404
NOT FOR USE WITH POWER STEERING OR TRANSMISSION & OIL COOLER LINES
HOSE & TUBE

BLUE 400 SERIES HOSE (suits 400 & 510 series hose ends)

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 7.5 M / 24 ft 7-1/4” 15M / 49ft 2-9/16” 30 M / 98ft 5-1/8” BULK PACKS
Length Part No
-4 AF400-04-1M AF400-04-2M AF400-04-3M AF400-04-4.5M AF400-04-7.5M AF400-04-15M AF400-04-30M
-5 AF400-05-1M AF400-05-2M AF400-05-3M AF400-05-4.5M AF400-05-7.5M AF400-05-15M AF400-05-30M 100M AF400-05-100M
-6 AF400-06-1M AF400-06-2M AF400-06-3M AF400-06-4.5M AF400-06-7.5M AF400-06-15M AF400-06-30M 100M AF400-06-100M
-8 AF400-08-1M AF400-08-2M AF400-08-3M AF400-08-4.5M AF400-08-7.5M AF400-08-15M AF400-08-30M 100M AF400-08-100M
-10 AF400-10-1M AF400-10-2M AF400-10-3M AF400-10-4.5M AF400-10-7.5M AF400-10-15M AF400-10-30M 50M AF400-10-50M
-12 AF400-12-1M AF400-12-2M AF400-12-3M AF400-12-4.5M AF400-12-7.5M AF400-12-15M AF400-12-30M

BLACK 400 SERIES HOSE (suits 400 & 510 series hose ends)

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 7.5 M / 24 ft 7-1/4” 15M / 49ft 2-9/16” 30 M / 98ft 5-1/8” BULK PACKS

Length Part No
-4 AF400-04-1MBLK AF400-04-2MBLK AF400-04-3MBLK AF400-04-4.5MBLK AF400-04-7.5MBLK AF400-04-15MBLK AF400-04-30MBLK
-5 AF400-05-1MBLK AF400-05-2MBLK AF400-05-3MBLK AF400-05-4.5MBLK AF400-05-7.5MBLK AF400-05-15MBLK AF400-05-30MBLK 100M AF400-05-100MBLK
-6 AF400-06-1MBLK AF400-06-2MBLK AF400-06-3MBLK AF400-06-4.5MBLK AF400-06-7.5MBLK AF400-06-15MBLK AF400-06-30MBLK 100M AF400-06-100MBLK
-8 AF400-08-1MBLK AF400-08-2MBLK AF400-08-3MBLK AF400-08-4.5MBLK AF400-08-7.5MBLK AF400-08-15MBLK AF400-08-30MBLK 100M AF400-08-100MBLK
-10 AF400-10-1MBLK AF400-10-2MBLK AF400-10-3MBLK AF400-10-4.5MBLK AF400-10-7.5MBLK AF400-10-15MBLK AF400-10-30MBLK 50M AF400-10-50MBLK
-12 AF400-12-1MBLK AF400-12-2MBLK AF400-12-3MBLK AF400-12-4.5MBLK AF400-12-7.5MBLK AF400-12-15MBLK AF400-12-30MBLK

SIZE PART NO INSIDE DIA OUTSIDE DIA OPERATING PRESS

-4 AF400-04 6.4mm 1/4” 12mm 15/32 250PSI 17.24BAR
-5 AF400-05 7.9mm 5/16” 14.3mm 9/16” 250PSI 17.24BAR
-6 AF400-06 9.5mm 3/8” 15.8mm 5/8” 250PSI 17.24BAR
-8 AF400-08 12.7mm 1/2” 19.1mm 3/4” 250PSI 17.24BAR
-10 AF400-10 15.9mm 5/8” 22.9mm 29/32” 250PSI 17.24BAR
-12 AF400-12 19.1mm 3/4” 26.2mm 1-1/32” 250PSI 17.24BAR

20 aeroflowperformance.com
 500 PUSH LOCK HOSE

Inner L
iner
E85 & M
ethano
500 SERIES PUSH LOCK HOSE (suits 400 & 510 series hose ends) Compa l
Aeroflow 500 series push lock hose is designed for the use with our push-on fittings. Available in black ONLY.
tible
Constructed from an outside layer of chlorinated polyethylene (CPE). This withstands higher temperatures and
better weather resistance with an oil resistant, tough textured outer cover.
Nylon reinforced to provide strength whilst keeping the flexibility in the hose. Note: Please ensure all
Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol, hose is thoroughly cleaned
petroleum oils, lubricants, coolant systems, low pressure brake / clutch reservoirs line, low pressure power steering out before use.
lines and transmission cooler lines.

• Temp range -40oC (-40oF) to 125oC (257oF)

• Working pressure 290 PSI (20 BAR)

NOTE: CLAMPS MUST BE USED ON ALL APPLICATIONS OVER 60oC (140oF)

AND OVER 60 PSI OF PRESSURE.
NOT SUITABLE FOR ANY SUBMERSIBLE APPLICATIONS.

HOSE & TUBE

Note. Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hoses
compatibility with all fuels unless otherwise stated.
We recommend the use of Aeroflows PTFE series hose for all other types of fuels.

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19 ft 8-1/4” 15M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-4 AF500-04-1MBLK AF500-04-2MBLK AF500-04-3MBLK AF500-04-4.5MBLK AF500-04-6MBLK AF500-04-15MBLK AF500-04-30MBLK
-5 AF500-05-1MBLK AF500-05-2MBLK AF500-05-3MBLK AF500-05-4.5MBLK AF500-05-6MBLK AF500-05-15MBLK AF500-05-30MBLK
-6 AF500-06-1MBLK AF500-06-2MBLK AF500-06-3MBLK AF500-06-4.5MBLK AF500-06-6MBLK AF500-06-15MBLK AF500-06-30MBLK
-8 AF500-08-1MBLK AF500-08-2MBLK AF500-08-3MBLK AF500-08-4.5MBLK AF500-08-6MBLK AF500-08-15MBLK AF500-08-30MBLK
-10 AF500-10-1MBLK AF500-10-2MBLK AF500-10-3MBLK AF500-10-4.5MBLK AF500-10-6MBLK AF500-10-15MBLK AF500-10-30MBLK
-12 AF500-12-1MBLK AF500-12-2MBLK AF500-12-3MBLK AF500-12-4.5MBLK AF500-12-6MBLK AF500-12-15MBLK AF500-12-30MBLK

SIZE PART NO INSIDE DIA OUTSIDE DIA OPERATING PRESS

-4 AF500-04 6.35mm 1/4” 11.94mm 15/32” 290PSI 20BAR
-5 AF500-05 7.9mm 5/16” 14.2mm 9/16” 290PSI 20BAR
-6 AF500-06 9.5mm 3/8” 16.6mm 21/32” 290PSI 20BAR
-8 AF500-08 12.7mm 1/2” 19.55mm 49/64” 290PSI 20BAR
-10 AF500-10 15.9mm 5/8” 23.5mm 59/64” 290PSI 20BAR
-12 AF500-12 19.05mm 3/4” 25.4mm 1” 290PSI 20BAR

AERO CLAMPS
Aero clamps are recommended for extra
clamping on push lock hose used in high
pressure and heat applications. 5 different
sizes available. Suits 400 & 500 Series hoses.

AERO CLAMP PLIERS Part No Description

Aero clamps are recommended for extra clamping on push lock hose used AF444-04 Suits -4 & -5 push lock hose
in high pressure and heat applications. This tool aids in the installation and AF444-06 Suits -6 push lock hose
removal of all sized Aero clamps. AF444-08 Suits -8 push lock hose
AF444-10 Suits -10- push lock hose
Part No Description AF444-12 Suits -12 push lock hose
AF98-2024 Fits and removes all Aero clamps These part numbers are available in packs of 50 clamps.
Add -50 to end of part number eg. AF444-06-50

aeroflowperformance.com 21
 COVER BRAID & HOSE FINISHERS

111 SERIES STAINLESS STEEL BRAIDED COVER

This is the best quality Stainless Steel Braided Cover available on the market! It is strong, hard wearing and the close weave will not allow the hose to show
through the braid. For a show quality finish on your Street Machine, Hot Rod, Custom, Bike, Boat or daily driver. This is an economical way to dress up your
engine bay.

ID 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4”
14mm 9/16” AF111-014-1M AF111-014-2M AF111-014-3M AF111-014-4.5M AF111-014-6M
21mm 53/64” AF111-021-1M AF111-021-2M AF111-021-3M AF111-021-4.5M AF111-021-6M
24mm 61/64” AF111-024-1M AF111-024-2M AF111-024-3M AF111-024-4.5M AF111-024-6M
29mm 1-9/64” AF111-029-1M AF111-029-2M AF111-029-3M AF111-029-4.5M AF111-029-6M
45mm 1-25/32” AF111-045-1M AF111-045-2M AF111-045-3M AF111-045-4.5M AF111-045-6M
50mm 1-31/32” AF111-050-1M AF111-050-2M AF111-050-3M AF111-050-4.5M AF111-050-6M
60mm 2-23/64 AF111-060-1M AF111-060-2M AF111-060-3M AF111-060-4.5M AF111-060-6M

ID 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4”
14mm 9/16” AF111-014-1MBLK AF111-014-2MBLK AF111-014-3MBLK AF111-014-4.5MBLK AF111-014-6MBLK
21mm 53/64” AF111-021-1MBLK AF111-021-2MBLK AF111-021-3MBLK AF111-021-4.5MBLK AF111-021-6MBLK
24mm 61/64” AF111-024-1MBLK AF111-024-2MBLK AF111-024-3MBLK AF111-024-4.5MBLK AF111-024-6MBLK
29mm 1-9/64” AF111-029-1MBLK AF111-029-2MBLK AF111-029-3MBLK AF111-029-4.5MBLK AF111-029-6MBLK
45mm 1-25/32” AF111-045-1MBLK AF111-045-2MBLK AF111-045-3MBLK AF111-045-4.5MBLK AF111-045-6MBLK
50mm 1-31/32” AF111-050-1MBLK AF111-050-2MBLK AF111-050-3MBLK AF111-050-4.5MBLK AF111-050-6MBLK
60mm 2-23/64 AF111-060-1MBLK AF111-060-2MBLK AF111-060-3MBLK AF111-060-4.5MBLK AF111-060-6MBLK
HOSE & TUBE

PART No Inside Dia. Suits Hose Outside Dia. Suggested Applications

AF111-014 14mm, 9/16” 10-14mm, 3/8” - 9/16” Fuel, Oil, Water and Vacuum Hoses
AF111-021 21mm, 13/16” 17-21mm, 11/16” - 13/16” Fuel, Oil, Water and Vacuum Hoses
AF111-024 24mm, 15/16” 21-24mm, 13/16” - 15/16” Fuel, Oil, Water, A/C and Vacuum Hoses
AF111-029 29mm, 1-9/64” 24-29mm, 15/16” - 1-9/64” Fuel, Oil, Water, A/C and Vacuum Hoses
AF111-045 45mm, 1-49/64” 40-45mm, 1-9/16” - 1-49/64” Small Radiator Hoses
AF111-050 50mm, 1-31/32” 45-50mm, 1-49/64” - 1-31/32” Medium Radiator Hoses
AF111-060 60mm, 2-3/8” 50-60mm, 1-31/32” - 2-3/8” Large Radiator Hoses

Note: Allow thickness of

stainless steel outer cover when
calculating clamp size

HEX HOSE FINISHERS

Hex Hose finishers are designed to add a completed
appearance to your hoses with easy installation of a hose
clamp and are available in seven great colours: blue,
black, chrome, red, purple, gold and silver. Aeroflow’s
corrosion resistant, colour consistent and hand polished
finish adds the final touch of quality and protection.

100 Series
ID: mm inch Hose Sizes Blue Red Purple Silver Black Gold Chrome
12.7 1/2” -4 AF150-04 AF150-04R AF150-04PUR AF150-04S AF150-04BLK AF150-04G AF150-04CH
14.3 9/16” AF150-05 AF150-05R AF150-05PUR AF150-05S AF150-05BLK AF150-05G AF150-05CH
15.8 5/8” -6 AF150-06 AF150-06R AF150-06PUR AF150-06S AF150-06BLK AF150-06G AF150-06CH
16.5 21/32” AF150-07 AF150-07R AF150-07PUR AF150-07S AF150-07BLK AF150-07G AF150-07CH
17.5 11/16” -8 AF150-08 AF150-08R AF150-08PUR AF150-08S AF150-08BLK AF150-08G AF150-08CH
20.6 13/16” -10 AF150-10 AF150-10R AF150-10PUR AF150-10S AF150-10BLK AF150-10G AF150-10CH
24.9 15/16” -12 AF150-12 AF150-12R AF150-12PUR AF150-12S AF150-12BLK AF150-12G AF150-12CH
28.5 1-1/8” AF150-14 AF150-14R AF150-14PUR AF150-14S AF150-14BLK AF150-14G AF150-14CH
30.5 1-3/16” -16 AF150-16 AF150-16R AF150-16PUR AF150-16S AF150-16BLK AF150-16G AF150-16CH
40.5 1-19/32” -20 AF150-20 AF150-20R AF150-20PUR AF150-20S AF150-20BLK AF150-20G AF150-20CH
44.5 1-3/4” AF150-24 AF150-24R AF150-24PUR AF150-24S AF150-24BLK AF150-24G AF150-24CH
49.2 1-15/16” AF150-28 AF150-28R AF150-28PUR AF150-28S AF150-28BLK AF150-28G AF150-28CH
52 2-1/16” AF150-30 AF150-30R AF150-30PUR AF150-30S AF150-30BLK AF150-30G AF150-30CH
54 2-3/16” AF150-32 AF150-32R AF150-32PUR AF150-32S AF150-32BLK AF150-32G AF150-32CH
58.5 2-5/16” AF150-34 AF150-34R AF150-34PUR AF150-34S AF150-34BLK AF150-34G AF150-34CH

22 aeroflowperformance.com
 AIR & BRAKE LINES

For fittings to
120 SERIES NYLON HOSE suit Nylon Hose
(suits 120 series fittings) see page 54
Aeroflow’s Flexible black nylon hose is ideal for vacuum, air, oil, fuel and low pressure
hydraulic lines and to be used with Aeroflow’s 120 Series Push-to-connect aluminium fittings.
The nylon hose has an extremely smooth inner surface with a very low coefficient.
• Max Bend Radius 25mm 63/64” • Burst Pressure 1000 PSI (68.95 Bar)
• Working Pressure Mpa 1.7, 250PSI , 17.2 Bar • Safe for use with water methanol kits.
• Temperature range -40 C (-40oF) to 90 C (194oF) • Wall Thickness 3/64” (1mm)

Size 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16”
4.76mm 3/16” AF120-187-1M AF120-187-2M AF120-187-4.5M AF120-187-6M AF120-187-15M
6.35mm 1/4” AF120-250-1M AF120-250-2M AF120-250-4.5M AF120-250-6M AF120-250-15M
7.94mm 5/16” AF120-312-1M AF120-312-2M AF120-312-4.5M AF120-312-6M AF120-312-15M

HOSE & TUBE

200 SERIES PTFE (Teflon®) STAINLESS STEEL COATED BRAIDED HOSE
The Aeroflow range includes a coated PTFE (Teflon) -3 hose. This high quality stainless hose has a PVC coating on it. It’s available in Black and Clear and was
designed to use with our brake fittings. It can also be used with our 200 series fittings.

AN Colour 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-3 CLEAR AF200-03-1MCC AF200-03-2MCC AF200-03-3MCC AF200-03-6MCC AF200-03-15MCC AF200-03-30MCC
-3 BLACK AF200-03-1MBLKC AF200-03-2MBLKC AF200-03-3MBLKC AF200-03-6MBLKC AF200-03-15MBLKC AF200-03-30MBLKC

200 Series Hose Specifications

AN I.D. O.D. Operating Press Burst Press
-3 3.6mm 9/64” 7.35mm 19/64 in 4000PSI 275.79BAR 12000PSI 827.37BAR

COATED STEEL BRAKE HARD LINE 304 STAINLESS STEEL BRAKE LINE
Aeroflow offer seamless steel brake line for use with our Aeroflow offer stainless hard line for use with our stainless
stainless brake fittings. This product is an economical brake fittings to give you a durable and professional finish.
alternative that gives you a high quality finish.

Part No Size Length

Part No Size Length
AF66-3316 4.76mm 3/16” 7.6M / 25ft
AF66-4316 4.76mm 3/16” 7.6M / 25ft

aeroflowperformance.com 23
 HARDLINE

ALUMINIUM & STAINLESS STEEL HARD LINE

Aeroflow offer both aluminium and stainless steel hard line in many different sizes. All For fittings to
suit Hard Line
sizes are also available in different finishes including black anodised finish for use in high
corrosion resistance applications such as E85 and alcohol fuels.
see page 161

Anodised for E85 & Methanol applications.

Note: Black coating may appear to flake on tight radius bends,
this has no effect on the integrity and corrosion resistance of the aluminium line.

O.D. Length Wall Raw Alloy Finish Black Anodised 304 Stainless Steel Wall
4.76mm 3/16” 7.6M / 25ft .9mm >1/32” AF66-4316 (Zinc Coated Steel) AF66-3316 .71mm 1/32”
6.35mm 1/4” 7.6M / 25ft 1.0mm <3/64” AF66-2998 AF66-2998BLK AF66-2998SS .5mm 1/64”
7.9mm 5/16” 7.6M / 25ft 1.0mm <3/64” AF66-2999 AF66-2999BLK AF66-2999SS .71mm 1/32”
9.5mm 3/8” 7.6M / 25ft 1.0mm <3/64” AF66-3000 AF66-3000BLK AF66-3000SS .71mm 1/32”
12.7mm 1/2” 7.6M / 25ft 1.2mm 3/64” AF66-3001 AF66-3001BLK AF66-3001SS .8mm 1/32”
15.8mm 5/8” 7.6M / 25ft 1.2mm 3/64” AF66-3002 AF66-3002BLK
19.05mm 3/4” 7.6M / 25ft 1.5mm 1/16” AF66-3003 AF66-3003BLK
HOSE & TUBE

BILLET DUAL HOSE SEPARATORS (Singles)

Blue Red Black Silver Titanium BILLET P - CLAMPS (Singles)
AF156-03 AF156-03R AF156-03BLK AF156-03S AF156-03T
AF156-04 AF156-04R AF156-04BLK AF156-04S AF156-04T Blue Red Black Silver
AF156-05 AF156-05R AF156-05BLK AF156-05S AF156-05T
AF156-06 AF156-06R AF156-06BLK AF156-06S AF156-06T AF157-03 AF157-03R AF157-03BLK AF157-03S
AF156-07 AF156-07R AF156-07BLK AF156-07S AF156-07T AF157-04 AF157-04R AF157-04BLK AF157-04S
AF156-08 AF156-08R AF156-08BLK AF156-08S AF156-08T AF157-05 AF157-05R AF157-05BLK AF157-05S
AF156-09 AF156-09R AF156-09BLK AF156-09S AF156-09T AF157-06 AF157-06R AF157-06BLK AF157-06S
AF156-10 AF156-10R AF156-10BLK AF156-10S AF156-10T AF157-07 AF157-07R AF157-07BLK AF157-07S
AF156-12 AF156-12R AF156-12BLK AF156-12S AF156-12T AF157-08 AF157-08R AF157-08BLK AF157-08S
AF156-15 AF156-15R AF156-15BLK AF156-15S AF156-15T AF157-09 AF157-09R AF157-09BLK AF157-09S
AF156-17 AF156-17R AF156-17BLK AF156-17S AF156-17T AF157-10 AF157-10R AF157-10BLK AF157-10S
AF157-12 AF157-12R AF157-12BLK AF157-12S
NOTE: please refer to size guide to make sure you choose the correct clamps to suit AF157-15 AF157-15R AF157-15BLK AF157-15S
your hoses. AF157-17 AF157-17R AF157-17BLK AF157-17S
Note: Mounting hole diameter is 4mm (5/32”)
P-CLAMPS & HOSE SEPARATORS SIZE GUIDE NOTE: please refer to size guide to make sure you choose the correct clamps
to suit your hoses.
`
Part No I.D. Hard Line Braided Hose
BILLET P - CLAMPS 10 PACKS
-03 4.7mm 3/16” 3/16” To SUIT 4.76mm (3/16”) O.D. HARD LINE
-04 6.4mm 1/4” 1/4” -3 200, 250 Series
-05 7.9mm 5/16” 5/16” -4 200, 250 Series
-06 9.5mm 3/8” 3/8” -4 Kryptalon Blue Red Black Silver
-07 11.1mm 7/16” -4 100,450 -6 200,250
-08 12.7mm 1/2” 1/2” AF157-03-10 AF157-03R-10 AF157-03BLK-10 Silver
AF157-03S-10
-09 14.2mm 9/16” -6 100,450, Kryptalon, -8 200,250 Pack contains 10 clamps
-10 15.9mm 5/8” 5/8” -8 100,450 -10 200,250
-12 19.2mm 3/4” -10 100,450
-15 23.8mm 15/16” -12 100,450
-17 27.3mm 1-5/16” -16 100,450

24 aeroflowperformance.com
 CLAMPS

STEPPED BILLET DUAL HOSE SEPARATORS

Aeroflow stepped hose separators are made from 6061-T6 aluminium. These
billet separators are a great option for those guys running different size lines
and wanting to separate them with a stylish billet clamp. These are a great
way to keep your engine bay neat and tidy while giving it that elite look.

Blue Red Black Silver Titanium

AF156-07-09 AF156-07-09R AF156-07-09BLK AF156-07-09S AF156-07-09T
AF156-07-10 AF156-07-10R AF156-07-10BLK AF156-07-10S AF156-07-10T
AF156-09-10 AF156-09-10R AF156-09-10BLK AF156-09-10S AF156-09-10T
AF156-09-12 AF156-09-12R AF156-09-12BLK AF156-09-12S AF156-09-12T AF156-08T
AF156-07-10T

S/S HARDLINE CLAMPS

Part No Description
AF300-00 4.7mm (3/16”) hardline Clamps 12 Pack
AF300-01 9.5mm (3/8” ) hardline Clamps 12 Pack

CUSHIONED P-CLAMPS
Blue Black Silver
10 PACKS
AF158-03 AF158-03BLK AF158-03S

HOSE & TUBE

AF158-04 AF158-04BLK AF158-04S
AF158-05 AF158-05BLK AF158-05S
AF158-06 AF158-06BLK AF158-06S
5 PACKS
AF158-08 AF158-08BLK AF158-08S
AF158-09 AF158-09BLK AF158-09S
AF158-10 AF158-10BLK AF158-10S
AF158-12 AF158-12BLK AF158-12S
AF158-16
AF158-18
AF158-16BLK
AF158-18BLK
AF158-16S
AF158-18S DUAL S/S HARDLINE CLAMPS
AF158-20 AF158-20BLK AF158-20S Includes 1x 10-32 button head cap screw bolt and 1 x self tapping screw
AF158-24 AF158-24BLK AF158-24S
AF158-28 AF158-28BLK AF158-28S Part No Description Pack
AF158-30 AF158-30BLK AF158-30S
AF158-32 AF158-32BLK AF158-32S AF300-03-03 4.76mm (3/16”) & 4.76mm (3/16”) Sold as singles
AF300-04-04 6.4mm (1/4”) & 6.4mm (1/4”) Sold as singles
Note: Mounting hole diameter is 5.19mm (13/64”)
AF300-06-01 4.76mm (3/16”) & 9.52mm (3/8”) 6 Pack
AF300-06-05 7.93mm (5/16”) & 9.52mm (3/8”) 6 Pack
CUSHIONED P-CLAMPS SIZE GUIDE AF300-05-05 7.93mm (5/16”) & 7.93mm (5/16”) Sold as singles
AF300-06-06 9.52mm (3/8”) & 9.52mm (3/8”) Sold as singles
Part No I.D. Hard Line Braided Hose AF300-10-10 15.9mm (5/8”) & 15.9mm (5/8”) Sold as singles

-03 4.7mm 3/16” 3/16”

-04 6.3mm 1/4” 1/4” -3 200,250 Series
-05 8mm 5/16” -4 200,250 Series
-06 9.5mm 3/8” 3/8” -6 200,250. -4 100 & 450 Series
-08 12.6mm 1/2” 1/2” -4 400 Series
-09 14.3mm 9/16” 9/16” -8 200, 250 -6 100 & 450 Series
-5 400 Series
-10 15.8mm 5/8” 5/8” -10 200,250. -8 100 & 450 Series
-6 500 series -6 400 Series
-12 19mm 3/4” -10 100 & 450 Series, -8 500 series
-8 400 Series
-16 25mm 1” -12 100 & 450 Series -10 500 series

-18 28.5mm 1-1/8”
-10 400 Series
-16 100 & 450 Series -12 400 Series
DUAL S/S HARDLINE CLAMP
-20 31.8mm 1-41/64” WITH BRACKET
-24 38mm 1-1/2” -20 100 & 450 Series
Includes 1x 10-32 button head cap screw bolt and 1 x self tapping screw
-28 44.5mm 1-3/4”
-30 47.6mm 1-7/8” Description
-32 50.8mm 2”
Part No
AF301-03-03 4.76mm (3/16”) & 4.76mm (3/16”) Sold as singles
AF301-06-06 9.52mm (3/8”) & 9.52mm (3/8”) Sold as singles

aeroflowperformance.com 25
 KRYPTALON®

KRYPTALON® ULTRA-LIGHT
FLEXIBLE KEVLAR BRAIDED HOSE
Aeroflow’s new Kryptalon® series ultra-light flexible Teflon® kevlar braided
hose & billet big-bore lightweight fittings have been engineered for extreme
racing conditions, where every gram counts and reliability is king. Aeroflow’s
lightest hose combines a woven Kevlar braid with an internal smooth bore
Teflon liner for greater flow capacity, with a convoluted outer for astonishing
flexibility. It also has significantly higher flow and pressure ratings than
conventional convoluted Teflon hose.
Aeroflow’s new Kryptalon® Series smooth bore design eradicates boundary
layer entrapment and flow disruption for performance you can count on!
The Teflon liner hose has a large range of applications, fuels including
Nitromethane, E85, E10, methanol, oils, lubricants, coolant systems.
Available in -4 to -16 sizes in 1, 2, 3, 4.5, 6, 15 and 30 metre lengths. For a
clean cut, you must use Aeroflow’s Non-Stick Cutting Film (AF98-2049).
Simply use Aeroflow alloy wrenches to assemble NO special tools are
required. Kryptalon® hose & fittings have been developed to flow more, be
lighter and excel in hard core performance environments but are still easily
assembled in your garage or at the track.
Temperature rating: -94oF to 500oF / -70oC to 260oC
KRYPTALON® HOSE & FITTINGS

Note: Use inner coil support spring on all tight radius bends and inlet / suction side of any pump.

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16”

-4 AF7000-04-1M AF7000-04-2M AF7000-04-3M AF7000-04-4.5M AF7000-04-6M AF7000-04-15M

-6 AF7000-06-1M AF7000-06-2M AF7000-06-3M AF7000-06-4.5M AF7000-06-6M AF7000-06-15M
-8 AF7000-08-1M AF7000-08-2M AF7000-08-3M AF7000-08-4.5M AF7000-08-6M AF7000-08-15M
-10 AF7000-10-1M AF7000-10-2M AF7000-10-3M AF7000-10-4.5M AF7000-10-6M AF7000-10-15M
-12 AF7000-12-1M AF7000-12-2M AF7000-12-3M AF7000-12-4.5M AF7000-12-6M AF7000-12-15M
-16 AF7000-16-1M AF7000-16-2M AF7000-16-3M AF7000-16-4.5M AF7000-16-6M AF7000-16-15M

7000 Series Hose Specifications

AN I.D. O.D. Max Operating Press Max Bend Radius
-4 7mm 9/32” 9.6mm 3/8” 1320PSI 90 Bar 38mm 1-1/2”
-6 10mm 13/32” 13.7mm 35/64” 1180PSI 80 Bar 50mm 1-21/32”
-8 13.4mm 17/32” 17.2mm 11/16” 1030PSI 70 Bar 64mm 2-3/32”
-10 16.5mm 21/32” 21.1mm 53/64” 955PSI 65 Bar 100mm 3-9/32”
-12 19.9mm 25/32” 24.6mm 31/32” 880PSI 60 Bar 120mm 3-15/16”
-16 26.1 mm 1-1/32” 31.4 mm 1-15/64” 740PSI 50 Bar 146mm 4-51/64”

INNER SUPPORT SPRING GUIDE FOR

KYRPTALON® HOSE
For use with Kryptalon® hose. A Support Spring is recommended for
suction applications or when very tight bends must be made.
Made from Stainless Steel.

REINFORCING HOSES FOR

VACUUM APPLICATIONS
One of the most extreme applications for a hose is when being
used in vacuum applications. It is particularly important that you
select the correct hose for your application. Great care should be
Kryptalon® Spring Part No Length taken in setting up and handling of hoses used in vacuum applica-
tions, free-flowing bends are preferred to tight radius and where
Hose size
possible vacuum hoses should be kept away from major heat
-4 -6 AF450-06-SUPP 1.2m/4ft sources. If a hose is installed with a radius tighter than the minimum
-6 -8 AF450-08-SUPP 1.2m/4ft bend radius or if a hose has been damaged and/or kinked, the tight
-8 -10 AF450-10-SUPP 1.2m/4ft radius and/or the damaged/kinked area will be a weak point creat-
-10 -12 AF450-12-SUPP 1.2m/4ft ing a potential restriction and the ability to correctly operate with
-12 -16 AF450-16-SUPP 1.2m/4ft vacuum will be reduced. For tight radius bends and high vacuum
-16 -20 AF450-20-SUPP 1.2m/4ft applications, an inner coil support spring must be used.

26 aeroflowperformance.com
 KRYPTALON®

KRYPTALON® & PUSH LOCK

NON-STICK CUTTING FILM HOSE CUTTER
Aeroflow’s non-stick cutting film is an easy and cost effective way for a neat No more wasting time and hose with nasty unclean cuts, simply line up hose
cut every time of Kevlar or Nylon braided hose. at 90 degrees to get a clean cut every time. Can be used with Aeroflow’s
No more struggling with sliding the socket nut over the frayed cloth braid, Kryptalon® series and 400 & 500 series hoses. The advantage of our cutter is
simply slide the nut over before removing the tape. the blade is dual functioning, simply rotate the blade when blunt. Cutter also
This handy kit comes with 50 meters of clear non-stick cutting film and 2 supplied with spare blade.
meters of white PE film that can also be used on stainless braided hose.

Part No Description Part No Description

AF98-2052 Kryptalon®, 400 Series Hose Cutter
AF98-2049 Non-stick cutting film
AF98-2053 Hand held cutter replacement 5 pack of blades that
works out to be 10 when you include the rotation.

KRYPTALON® ASSEMBLY INSTRUCTIONS

KRYPTALON® HOSE & FITTINGS

1. Measure desired hose length and wrap tightly with 2. Cut through the centre of non-stick film while 3. Carefully slide the socket nut over the hose while
Aeroflow’s non-stick cutting film, (part # AF98-2049), ensuring that you cut the hose at a 90 degree angle keeping the non-stick film on the end of the hose.
allowing at least 3 full rotations of the non-stick film. using Aeroflow cutters, (part # AF98-2052), or
alternatively you can use a sharp box cutting knife
being careful not to fray the Kevlar braid.

4. Carefully slide the olive onto the end of the hose 5. Carefully slide olive past non- stick film then remove the non-stick film and slide olive back up to the end of
ensuring that the slots in the olive face towards the the hose. Apply a small amount of Aero-Seal (part # AF98-2023), onto the male thread of the Kryptalon® hose
socket nut. end and screw the socket nut onto the Kryptalon® hose end.

6. Secure the hose end socket using Aeroflow vice jaws (part # AF98-2001 or AF98-2002) or by using an
Aeroflow aluminium wrench (part # AF98-2003 or AF98-2039). Tighten the Kryptalon® hose end clockwise until
the socket nut is tight, ensuring the correct crush of the olive onto the hose. You should notice that the male
thread of the fitting is not showing, covered by the socket nut.
aeroflowperformance.com 27
 KRYPTALON®

KRYPTALON® LIGHT WEIGHT

ONE PIECE SWIVEL HOSE ENDS
Aeroflow engineers have developed an innovative lightweight reusable 360°
swivel hose end to work with our Kryptalon® ultra-light weight flexible kevlar
hose. One piece design allows for uninterrupted flow and eliminates the extra
leak points of braised multi piece fittings. Made from 6061 T6 aluminium and
then hard anodised for durability, they are designed for serious racing applications
where light weight is a priority but are equally at home in any application.
Designed to work with the large bore of our Kyrptalon® hose they have a greater
flow rate than standard Teflon hose ends, giving you the best of both worlds,
improved flow and light weight. Proven under the rigors of Nitro drag racing,
there’s no better choice when lightweight and reliability are required.
Extremely easy to assemble, no special tools required.
Available in black or titanium hard anodised finish.

Note: See fitting

instructions
on page 27

Standard
Aeroflow
PTFE Fitting
KRYPTALON®
Larger internal bore for
high flow capacity Multiple sealing
KRYPTALON® HOSE & FITTINGS

Cutaway showing our unique rings

proprietary compression design.

KRYPTALON® LIGHT WEIGHT ONE

PIECE SWIVEL HOSE ENDS FACTS
Aeroflow’s Kryptalon® range uses a unique compression style olive.
You simply slide the socket over our Kryptalon® hose and push the olive
over the TOP of the hose and Kevlar. No more trying to separate the
braid from the Teflon. This not only saves time but leaves a perfect leak
proof fitment every time. The unique designed Olive is compressed by
the taper on the inside of the socket end as it’s tightened. The Teflon is
compressed into the slots of the fitting, forming multiple sealing surfaces
like tiny O-Rings. This allows for maximum burst pressure.

STRAIGHT KRYPTALON® FITTINGS

Black Titanium
45° KRYPTALON® FITTINGS
Size
Size Black Titanium
-4 AF7021-04 AF7821-04
-6 AF7021-06 AF7821-06 -4 AF7022-04 AF7822-04
-8 AF7021-08 AF7821-08 -6 AF7022-06 AF7822-06
-10 AF7021-10 AF7821-10 -8 AF7022-08 AF7822-08
-12 AF7021-12 AF7821-12 -10 AF7022-10 AF7822-10
-16 AF7021-16 AF7821-16 -12 AF7022-12 AF7822-12
-16 AF7022-16 AF7822-16

28 aeroflowperformance.com
 KRYPTALON®

30° KRYPTALON® FITTINGS 60° KRYPTALON® FITTINGS

Size Black Titanium
Size Black Titanium
-4 AF7027-04 AF7827-04
-6 AF7027-06 AF7827-06 -4 AF7028-04 AF7828-04
-8 AF7027-08 AF7827-08 -6 AF7028-06 AF7828-06
-10 AF7027-10 AF7827-10 -8 AF7028-08 AF7828-08
-12 AF7027-12 AF7827-12 -10 AF7028-10 AF7828-10
-16 AF7027-16 AF7827-16 -12 AF7028-12 AF7828-12
-16 AF7028-16 AF7828-16

KRYPTALON® HOSE & FITTINGS

90° KRYPTALON® FITTINGS 150° KRYPTALON® FITTINGS
Black Titanium Size Black Titanium
Size
-4 AF7025-04 AF7825-04
-4 AF7023-04 AF7823-04
-6 AF7025-06 AF7825-06
-6 AF7023-06 AF7823-06
-8 AF7025-08 AF7825-08
-8 AF7023-08 AF7823-08
-10 AF7025-10 AF7825-10
-10 AF7023-10 AF7823-10
-12 AF7025-12 AF7825-12
-12 AF7023-12 AF7823-12
-16 AF7025-16 AF7825-16
-16 AF7023-16 AF7823-16

120° KRYPTALON® FITTINGS 180° KRYPTALON® FITTINGS

Size Black Titanium Size Black Titanium
-4 AF7024-04 AF7824-04 -4 AF7026-04 AF7826-04
-6 AF7024-06 AF7824-06 -6 AF7026-06 AF7826-06
-8 AF7024-08 AF7824-08 -8 AF7026-08 AF7826-08
-10 AF7024-10 AF7824-10 -10 AF7026-10 AF7826-10
-12 AF7024-12 AF7824-12 -12 AF7026-12 AF7826-12
-16 AF7024-16 AF7824-16 -16 AF7026-16 AF7826-16

aeroflowperformance.com 29
 KRYPTALON®

KRYPTALON® HEAVY DUTY ONE PIECE SWIVEL HOSE ENDS

Aeroflow engineers have developed an innovative heavy-duty reusable 360° swivel hose end to work with
our Kryptalon® ultra-light weight flexible kevlar hose. One piece design allows for uninterrupted flow and
eliminates the extra leak points of braised multi piece fittings. Made from 6061 T6 aluminium and then hard
anodised for durability, they are designed for serious racing applications where heavy-duty & light weight is a
priority but are equally at home in any application.
Designed to work with the large bore of our Kyrptalon® hose they have a greater flow rate than standard
Teflon hose ends, giving you the best of both worlds, improved flow and heavy-duty. Proven under the rigors
of Nitro drag racing, there’s no better choice when lightweight and reliability are required. Extremely easy to
assemble, no special tools required.
Available in Black or Titanium Hard Anodised finish in -6 to -12 sizes.

30° KRYPTALON® FITTINGS

90° KRYPTALON® FITTINGS
Size Black Titanium
-6 AF7057-06 AF7857-06 Size Black Titanium
-8 AF7057-08 AF7857-08
-10 AF7057-10 AF7857-10 -6 AF7053-06 AF7853-06
-12 AF7057-12 AF7857-12 -8 AF7053-08 AF7853-08
-10 AF7053-10 AF7853-10
KRYPTALON® HOSE & FITTINGS

-12 AF7053-12 AF7853-12

45° KRYPTALON® FITTINGS 120° KRYPTALON® FITTINGS

Size Black Titanium
Size Black Titanium
-6 AF7052-06 AF7852-06
-8 AF7052-08 AF7852-08 -6 AF7054-06 AF7854-06
-10 AF7052-10 AF7852-10 -8 AF7054-08 AF7854-08
-12 AF7052-12 AF7852-12 -10 AF7054-10 AF7854-10
-12 AF7054-12 AF7854-12

60° KRYPTALON® FITTINGS

Black Titanium
150° KRYPTALON® FITTINGS
Size
-6 AF7058-06 AF7858-06 Size Black Titanium
-8 AF7058-08 AF7858-08 -6 AF7055-06 AF7855-06
-10 AF7058-10 AF7858-10 -8 AF7055-08 AF7855-08
-12 AF7058-12 AF7858-12 -10 AF7055-10 AF7855-10
-12 AF7055-12 AF7855-12
30 aeroflowperformance.com
 KRYPTALON®

KRYPTALON® REPLACEMENT OLIVES (5 Pack)

Size Black Titanium
-4 AF7029-04 AF7829-04
-6 AF7029-06 AF7829-06
-8 AF7029-08 AF7829-08
-10 AF7029-10 AF7829-10
-12 AF7029-12 AF7829-12
-16 AF7029-16 AF7829-16

180° KRYPTALON® FITTINGS

Size Black Titanium KRYPTALON® REPLACEMENT SOCKETS
-6 AF7056-06 AF7856-06 Size Black Titanium

KRYPTALON® HOSE & FITTINGS

-8 AF7056-08 AF7856-08
-10 AF7056-10 AF7856-10 -4 AF7030-04 AF7830-04
-12 AF7056-12 AF7856-12 -6 AF7030-06 AF7830-06
-8 AF7030-08 AF7830-08
-10 AF7030-10 AF7830-10
-12 AF7030-12 AF7830-12
-16 AF7030-16 AF7830-16

aeroflowperformance.com 31
 880 ELITE SERIES FITTINGS

For us
100 & 4 e with
50 Serie
Hose s
880 ELITE Series Cutter Style One S
See Pag
e 16 & 1
Piece Full Flow Swivel Hose Ends 7
(suits 100 & 450 series hose)
Because we build cars too, we know some of our customers are tired of
individually hand polishing fittings to maintain shine on their show cars and
elite drivers. Aeroflow has the answer! Our Elite CNC’d full flow fittings are
made from 6061-T6 aluminium and are individually hand polished then
chrome plated to give our customers a stunning elite show quality finish that
is easily maintained with a simple wipe of a cloth. These fittings not only look
FITTINGS & ADAPTERS

better than anything else on the market but they perform great too. As used
on award winning elite show cars.

45° 880 ELITE HOSE ENDS

STRAIGHT 880 ELITE HOSE ENDS
Part No Description
Part No Description
AF882-04 -4 45o 880 cutter style elite hose end
AF881-04 -4 straight 880 cutter style elite hose end AF882-06 -6 45o 880 cutter style elite hose end
AF881-06 -6 straight 880 cutter style elite hose end AF882-08 -8 45o 880 cutter style elite hose end
AF881-08 -8 straight 880 cutter style elite hose end AF882-10 -10 45o 880 cutter style elite hose end
AF881-10 -10 straight 880 cutter style elite hose end AF882-12 -12 45o 880 cutter style elite hose end
AF881-12 -12 straight 880 cutter style elite hose end AF882-16 -16 45o 880 cutter style elite hose end
AF881-16 -16 straight 880 cutter style elite hose end AF882-20 -20 45o 880 cutter style elite hose end
AF881-20 -20 straight 880 cutter style elite hose end

60° 880 ELITE HOSE ENDS

30° 880 ELITE HOSE ENDS
Part No Description
Part No Description
AF888-04 -4 60o 880 cutter style elite hose end
AF887-04 -4 30o 880 cutter style elite hose end AF888-06 -6 60o 880 cutter style elite hose end
AF887-06 -6 30o 880 cutter style elite hose end AF888-08 -8 60o 880 cutter style elite hose end
AF887-08 -8 30o 880 cutter style elite hose end AF888-10 -10 60o 880 cutter style elite hose end
AF887-10 -10 30o 880 cutter style elite hose end AF888-12 -12 60o 880 cutter style elite hose end
AF887-12 -12 30o 880 cutter style elite hose end AF888-16 -16 60o 880 cutter style elite hose end
AF887-16 -16 30o 880 cutter style elite hose end

32 aeroflowperformance.com
 880 ELITE SERIES FITTINGS

90° 880 ELITE HOSE ENDS

Description
150° 880 ELITE HOSE ENDS
Part No
AF883-04 -4 90o 880 cutter style elite hose end Part No Description
AF883-06 -6 90o 880 cutter style elite hose end
AF883-08 -8 90o 880 cutter style elite hose end AF885-04 -4 150o 880 cutter style elite hose end
AF883-10 -10 90o 880 cutter style elite hose end AF885-06 -6 150o 880 cutter style elite hose end
AF883-12 -12 90o 880 cutter style elite hose end AF885-08 -8 150o 880 cutter style elite hose end
AF883-16 -16 90o 880 cutter style elite hose end AF885-10 -10 150o 880 cutter style elite hose end
AF883-20 -20 90o 880 cutter style elite hose end AF885-12 -12 150o 880 cutter style elite hose end
AF885-16 -16 150o 880 cutter style elite hose end

FITTINGS & ADAPTERS

120° 880 ELITE HOSE ENDS
Part No Description
AF884-04 -4 120o 880 cutter style elite hose end
AF884-06 -6 120o 880 cutter style elite hose end 180° 880 ELITE HOSE ENDS
AF884-08 -8 120o 880 cutter style elite hose end
AF884-10 -10 120o 880 cutter style elite hose end Part No Description
AF884-12 -12 120o 880 cutter style elite hose end
AF884-16 -16 120o 880 cutter style elite hose end AF886-04 -4 180o 880 cutter style elite hose end
AF886-06 -6 180o 880 cutter style elite hose end
AF886-08 -8 180o 880 cutter style elite hose end
AF886-10 -10 180o 880 cutter style elite hose end
AF886-12 -12 180o 880 cutter style elite hose end
AF886-16 -16 180o 880 cutter style elite hose end

aeroflowperformance.com 33
 550 SERIES CUTTER FITTINGS

550 Series Cutter Style One Piece Full Flow Swivel Hose Ends
(suits 100 & 450 series hose)
For use
100 & 4 with
50 Serie
Hose s
S
See Pag
e 16 & 1
7

Aeroflow’s 550 Series cutter fittings are a CNC machined one piece fitting which provide uninterrupted flow. The billet cutter end separates the wire
braid for maximum hose retention, sealing the hose for a second time which provides a greater sealing area for strength and easier assembly. The tight
mandrel bent radius body has superior wall thickness and a swivel head allowing for easy adjustment. Aeroflow’s 550 series fittings are the choice of
professionals for use in fuel systems, cooling systems, vacuum applications and oil systems.
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

STRAIGHT CUTTER HOSE ENDS

FITTINGS & ADAPTERS

45° FULL FLOW SWIVEL HOSE ENDS

AN Blue/Red Black Silver
-4 AF501-04 AF501-04BLK AF501-04S AN Blue/Red Black Silver
-6 AF501-06 AF501-06BLK AF501-06S
-8 AF501-08 AF501-08BLK AF501-08S -4 AF552-04 AF552-04BLK AF552-04S
-10 AF501-10 AF501-10BLK AF501-10S -6 AF552-06 AF552-06BLK AF552-06S
-12 AF501-12 AF501-12BLK AF501-12S -8 AF552-08 AF552-08BLK AF552-08S
-16 AF501-16 AF501-16BLK AF501-16S -10 AF552-10 AF552-10BLK AF552-10S
-20 AF501-20 AF501-20BLK AF501-20S -12 AF552-12 AF552-12BLK AF552-12S
-16 AF552-16 AF552-16BLK AF552-16S
These part numbers are available in packs of 25 fittings. -20 AF552-20 AF552-20BLK AF552-20S
Add -25 to end of part number eg. AF501-06BLK-25

30° FULL FLOW SWIVEL HOSE ENDS 60° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver Blue/Red Black Silver
AN
-4 AF557-04 AF557-04BLK AF557-04S
-4 AF558-04 AF558-04BLK AF558-04S
-6 AF557-06 AF557-06BLK AF557-06S
-6 AF558-06 AF558-06BLK AF558-06S
-8 AF557-08 AF557-08BLK AF557-08S
-8 AF558-08 AF558-08BLK AF558-08S
-10 AF557-10 AF557-10BLK AF557-10S
-10 AF558-10 AF558-10BLK AF558-10S
-12 AF557-12 AF557-12BLK AF557-12S
-12 AF558-12 AF558-12BLK AF558-12S
-16 AF557-16 AF557-16BLK AF557-16S
-16 AF558-16 AF558-16BLK AF558-16S

34 aeroflowperformance.com
 550 SERIES CUTTER FITTINGS

90° FULL FLOW SWIVEL HOSE ENDS

150° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver
AN Blue/Red Black Silver
-4 AF553-04 AF553-04BLK AF553-04S
-6 AF553-06 AF553-06BLK AF553-06S -4 AF555-04 AF555-04BLK AF555-04S
-8 AF553-08 AF553-08BLK AF553-08S -6 AF555-06 AF555-06BLK AF555-06S
-10 AF553-10 AF553-10BLK AF553-10S -8 AF555-08 AF555-08BLK AF555-08S
-12 AF553-12 AF553-12BLK AF553-12S -10 AF555-10 AF555-10BLK AF555-10S
-16 AF553-16 AF553-16BLK AF553-16S -12 AF555-12 AF555-12BLK AF555-12S
-20 AF553-20 AF553-20BLK AF553-20S -16 AF555-16 AF555-16BLK AF555-16S

These part numbers are available in packs of 25 fittings.

Add -25 to end of part number eg. AF553-06BLK-25

FITTINGS & ADAPTERS

120° FULL FLOW SWIVEL HOSE ENDS 180° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver AN Blue/Red Black Silver
-4 AF556-04 AF556-04BLK AF556-04S
-4 AF554-04 AF554-04BLK AF554-04S -6 AF556-06 AF556-06BLK AF556-06S
-6 AF554-06 AF554-06BLK AF554-06S -8 AF556-08 AF556-08BLK AF556-08S
-8 AF554-08 AF554-08BLK AF554-08S -10 AF556-10 AF556-10BLK AF556-10S
-10 AF554-10 AF554-10BLK AF554-10S -12 AF556-12 AF556-12BLK AF556-12S
-12 AF554-12 AF554-12BLK AF554-12S -16 AF556-16 AF556-16BLK AF556-16S
-16 AF554-16 AF554-16BLK AF554-16S

aeroflowperformance.com 35
 550 SERIES STEPPED FITTINGS

550 Series Cutter Style One Piece Stepped Style Hose Ends For us
(suits 100 & 450 series hose) 100 & 4 e with
50 Serie
Aeroflow’s expanders and reducer’s cutter style hose ends with Aerospace
triple seal/double o-ring are made from 6061-T6 aluminium. This design Hose s
ensures a secure, leak free connection every time. Aeroflow’s 550 series are S
See Pag
CNC’d with superior wall thickness, a must for any serious racer. Aeroflow’s e 16 & 1
corrosion resistant, colour consistent, hard 7
anodised (excluding silver) and hand polishing adds the final touch of quality
and protection you have come to expect from Aeroflow.

STRAIGHT STEPPED HOSE ENDS 60° SWIVEL STEPPED CUTTER HOSE ENDS
AN To Hose Blue/Red Black Silver AN To Hose Blue/Red Black Silver
-6 -8 AF501-08-06 AF501-08-06BLK AF501-08-06S -6 -8 AF558-08-06 AF558-08-06BLK AF558-08-06S
-8 -6 AF501-06-08 AF501-06-08BLK AF501-06-08S -8 -6 AF558-06-08 AF558-06-08BLK AF558-06-08S
-10 -8 AF501-08-10 AF501-08-10BLK AF501-08-10S -10 -8 AF558-08-10 AF558-08-10BLK AF558-08-10S
-10 -12 AF501-12-10 AF501-12-10BLK AF501-12-10S -10 -12 AF558-12-10 AF558-12-10BLK AF558-12-10S
-12 -16 AF501-16-12 AF501-16-12BLK AF501-16-12S -12 -16 AF558-16-12 AF558-16-12BLK AF558-16-12S
-16 -12 AF501-12-16 AF501-12-16BLK AF501-12-16S -16 -12 AF558-12-16 AF558-12-16BLK AF558-12-16S
FITTINGS & ADAPTERS

30° SWIVEL STEPPED CUTTER HOSE ENDS 90° SWIVEL STEPPED CUTTER HOSE ENDS
AN To Hose Blue/Red Black Silver AN To Hose Blue/Red Black Silver
-6 -8 AF557-08-06 AF557-08-06BLK AF557-08-06S -6 -8 AF553-08-06 AF553-08-06BLK AF553-08-06S
-8 -6 AF557-06-08 AF557-06-08BLK AF557-06-08S -8 -6 AF553-06-08 AF553-06-08BLK AF553-06-08S
-10 -8 AF557-08-10 AF557-08-10BLK AF557-08-10S -10 -8 AF553-08-10 AF553-08-10BLK AF553-08-10S
-10 -12 AF557-12-10 AF557-12-10BLK AF557-12-10S -10 -12 AF553-12-10 AF553-12-10BLK AF553-12-10S
-12 -16 AF557-16-12 AF557-16-12BLK AF557-16-12S -12 -16 AF553-16-12 AF553-16-12BLK AF553-16-12S
-16 -12 AF557-12-16 AF557-12-16BLK AF557-12-16S -16 -12 AF553-12-16 AF553-12-16BLK AF553-12-16S

45° SWIVEL STEPPED CUTTER HOSE ENDS 120° SWIVEL STEPPED CUTTER HOSE ENDS
AN To Hose Blue/Red Black Silver AN To Hose Blue/Red Black Silver
-6 -8 AF552-08-06 AF552-08-06BLK AF552-08-06S -6 -8 AF554-08-06 AF554-08-06BLK AF554-08-06S
-8 -6 AF552-06-08 AF552-06-08BLK AF552-06-08S -8 -6 AF554-06-08 AF554-06-08BLK AF554-06-08S
-10 -8 AF552-08-10 AF552-08-10BLK AF552-08-10S -10 -8 AF554-08-10 AF554-08-10BLK AF554-08-10S
-10 -12 AF552-12-10 AF552-12-10BLK AF552-12-10S -10 -12 AF554-12-10 AF554-12-10BLK AF554-12-10S
-12 -16 AF552-16-12 AF552-16-12BLK AF552-16-12S -12 -16 AF554-16-12 AF554-16-12BLK AF554-16-12S
-16 -12 AF552-12-16 AF552-12-16BLK AF552-12-16S -16 -12 AF554-12-16 AF554-12-16BLK AF554-12-16S

36 aeroflowperformance.com
 550 SERIES MALE ADAPTER FITTINGS

150° SWIVEL STEPPED CUTTER HOSE ENDS 180° SWIVEL STEPPED CUTTER HOSE ENDS
AN To Hose Blue/Red Black Silver AN To Hose Blue/Red Black Silver
-6 -8 AF555-08-06 AF555-08-06BLK AF555-08-06S -6 -8 AF556-08-06 AF556-08-06BLK AF556-08-06S
-8 -6 AF555-06-08 AF555-06-08BLK AF555-06-08S -8 -6 AF556-06-08 AF556-06-08BLK AF556-06-08S
-10 -8 AF555-08-10 AF555-08-10BLK AF555-08-10S -10 -8 AF556-08-10 AF556-08-10BLK AF556-08-10S
-10 -12 AF555-12-10 AF555-12-10BLK AF555-12-10S -10 -12 AF556-12-10 AF556-12-10BLK AF556-12-10S
-12 -16 AF555-16-12 AF555-16-12BLK AF555-16-12S -12 -16 AF556-16-12 AF556-16-12BLK AF556-16-12S
-16 -12 AF555-12-16 AF555-12-16BLK AF555-12-16S -16 -12 AF556-12-16 AF556-12-16BLK AF556-12-16S

550 Series Cutter Style One Piece Male Adapter Style Hose Ends For us
(suits 100 & 450 series hose) 100 & 4 e with
Aeroflow’s male adapter cutter style hose ends are designed to allow the hose end to be threaded directly into a female 50 Serie
port without the extra cost and complication of an adapter fitting. The Aerospace triple seal/double o-ring are made from Hose s
6061-T6 aluminium. This design ensures a secure, leak free connection every time. Aeroflow’s 550 series are CNC’d S
See Pag
with superior wall thickness, a must for any serious racer. Aeroflow’s corrosion resistant, colour consistent, hard anodized e 16 & 1
(excluding silver) and hand polishing adds the final touch of quality and protection you have come to expect from Aeroflow.
7

FITTINGS & ADAPTERS

45° ORB SWIVEL HOSE ENDS
ORB to Hose Blue/Red Black Silver 45° NPT SWIVEL HOSE ENDS
-4 to -6 AF544-06-04 AF544-06-04BLK AF544-06-04S
-6 to -6 AF544-06-06 AF544-06-06BLK AF544-06-06S
-8 to -6 AF544-06-08 AF544-06-08BLK AF544-06-08S
NPT to AN Blue/Red Black Silver
-6 to -8 AF544-08-06 AF544-08-06BLK AF544-08-06S 1/8” to -6 AF528-06-02 AF528-06-02BLK AF528-06-02S
-8 to -8 AF544-08-08 AF544-08-08BLK AF544-08-08S 1/4” to -6 AF528-06-04 AF528-06-04BLK AF528-06-04S
-10 to -8 AF544-08-10 AF544-08-10BLK AF544-08-10S 3/8” to -6 AF528-06-06 AF528-06-06BLK AF528-06-06S
-8 to -10 AF544-10-08 AF544-10-08BLK AF544-10-08S 1/4” to -8 AF528-08-04 AF528-08-04BLK AF528-08-04S
-10 to -10 AF544-10-10 AF544-10-10BLK AF544-10-10S 3/8” to -8 AF528-08-06 AF528-08-06BLK AF528-08-06S
-12 to -10 AF544-10-12 AF544-10-12BLK AF544-10-12S 1/2” to -8 AF528-08-08 AF528-08-08BLK AF528-08-08S
-10 to -12 AF544-12-10 AF544-12-10BLK AF544-12-10S 3/8” to -10 AF528-10-06 AF528-10-06BLK AF528-10-06S
-12 to -12 AF544-12-12 AF544-12-12BLK AF544-12-12S 1/2” to -10 AF528-10-08 AF528-10-08BLK AF528-10-08S
-12 to -16 AF544-16-12 AF544-16-12BLK AF544-16-12S 1/2” to -12 AF528-12-08 AF528-12-08BLK AF528-12-08S
-16 to -12 AF544-12-16 AF544-12-16BLK AF544-12-16S 3/4” to -12 AF528-12-12 AF528-12-12BLK AF528-12-12S
-16 to -16 AF544-16-16 AF544-16-16BLK AF544-16-16S 3/4” to -16 AF528-16-12 AF528-16-12BLK AF528-16-12S

90° ORB SWIVEL HOSE ENDS

90° NPT SWIVEL HOSE ENDS
ORB to Hose Blue/Red Black Silver
-4 to -6 AF549-06-04 AF549-06-04BLK AF549-06-04S NPT to AN Blue/Red Black Silver
-6 to -6 AF549-06-06 AF549-06-06BLK AF549-06-06S
-8 to -6 AF549-06-08 AF549-06-08BLK AF549-06-08S 1/8” to -6 AF529-06-02 AF529-06-02BLK AF529-06-02S
-6 to -8 AF549-08-06 AF549-08-06BLK AF549-08-06S 1/4” to -6 AF529-06-04 AF529-06-04BLK AF529-06-04S
-8 to -8 AF549-08-08 AF549-08-08BLK AF549-08-08S 3/8” to -6 AF529-06-06 AF529-06-06BLK AF529-06-06S
-10 to -8 AF549-08-10 AF549-08-10BLK AF549-08-10S 1/4” to -8 AF529-08-04 AF529-08-04BLK AF529-08-04S
-8 to -10 AF549-10-08 AF549-10-08BLK AF549-10-08S 3/8” to -8 AF529-08-06 AF529-08-06BLK AF529-08-06S
-10 to -10 AF549-10-10 AF549-10-10BLK AF549-10-10S 1/2” to -8 AF529-08-08 AF529-08-08BLK AF529-08-08S
-12 to -10 AF549-10-12 AF549-10-12BLK AF549-10-12S 3/8” to -10 AF529-10-06 AF529-10-06BLK AF529-10-06S
-10 to -12 AF549-12-10 AF549-12-10BLK AF549-12-10S 1/2” to -10 AF529-10-08 AF529-10-08BLK AF529-10-08S
-12 to -12 AF549-12-12 AF549-12-12BLK AF549-12-12S 1/2” to -12 AF529-12-08 AF529-12-08BLK AF529-12-08S
-12 to -16 AF549-16-12 AF549-16-12BLK AF549-16-12S 3/4” to -12 AF529-12-12 AF529-12-12BLK AF529-12-12S
-16 to -12 AF549-12-16 AF549-12-16BLK AF549-12-16S 3/4” to -16 AF529-16-12 AF529-16-12BLK AF529-16-12S
-16 to -16 AF549-16-16 AF549-16-16BLK AF549-16-16S
aeroflowperformance.com 37
 500 SERIES CUTTER FITTINGS

500 Series Cutter Style Swivel Hose Ends (suits 100 & 450 series hose)
For us
100 & 4 e with
Aeroflow’s 500 series cutter fittings are a braised full flow fitting. The billet cutter end
separates the wire braid for maximum hose retention, sealing the hose for a second time,
50 Serie
which provides a greater sealing area for strength and easier assembly. All angles are
mandrel bent, eliminating sharp changes in direction for optimum flow. Aeroflow’s 500 Series Hose s
fittings have a swivel head to allow for easy adjustment making them an excellent choice for S
See Pag
e 16 & 1
the automotive enthusiast for use in fuel systems, cooling systems, vacuum applications and
oil systems.
7
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)

STRAIGHT CUTTER HOSE ENDS

AN Blue/Red Black Silver
-4 AF501-04 AF501-04BLK AF501-04S
60° SWIVEL CUTTER HOSE ENDS
-6 AF501-06 AF501-06BLK AF501-06S
-8 AF501-08 AF501-08BLK AF501-08S AN Blue/Red Black Silver
-10 AF501-10 AF501-10BLK AF501-10S
-12 AF501-12 AF501-12BLK AF501-12S -4 AF508-04 AF508-04BLK AF508-04S
-16 AF501-16 AF501-16BLK AF501-16S -6 AF508-06 AF508-06BLK AF508-06S
-20 AF501-20 AF501-20BLK AF501-20S -8 AF508-08 AF508-08BLK AF508-08S
-10 AF508-10 AF508-10BLK AF508-10S
These part numbers are available in packs of 25 fittings. -12 AF508-12 AF508-12BLK AF508-12S
Add -25 to end of part number eg. AF501-06BLK-25 -16 AF508-16 AF508-16BLK AF508-16S
-20 AF508-20 AF508-20BLK AF508-20S
FITTINGS & ADAPTERS

90° SWIVEL CUTTER HOSE ENDS

30° SWIVEL CUTTER HOSE ENDS AN Blue/Red Black Silver
-4 AF503-04 AF503-04BLK AF503-04S
AN Blue/Red Black Silver -6 AF503-06 AF503-06BLK AF503-06S
-4 AF507-04 AF507-04BLK AF507-04S -8 AF503-08 AF503-08BLK AF503-08S
-6 AF507-06 AF507-06BLK AF507-06S -10 AF503-10 AF503-10BLK AF503-10S
-8 AF507-08 AF507-08BLK AF507-08S -12 AF503-12 AF503-12BLK AF503-12S
-10 AF507-10 AF507-10BLK AF507-10S -16 AF503-16 AF503-16BLK AF503-16S
-12 AF507-12 AF507-12BLK AF507-12S -20 AF503-20 AF503-20BLK AF503-20S
-16 AF507-16 AF507-16BLK AF507-16S
-20 AF507-20 AF507-20BLK AF507-20S

45° SWIVEL CUTTER HOSE ENDS 120° SWIVEL CUTTER HOSE ENDS
AN Blue/Red Black Silver AN Blue/Red Black Silver
-4 AF502-04 AF502-04BLK AF502-04S -4 AF504-04 AF504-04BLK AF504-04S
-6 AF502-06 AF502-06BLK AF502-06S -6 AF504-06 AF504-06BLK AF504-06S
-8 AF502-08 AF502-08BLK AF502-08S -8 AF504-08 AF504-08BLK AF504-08S
-10 AF502-10 AF502-10BLK AF502-10S -10 AF504-10 AF504-10BLK AF504-10S
-12 AF502-12 AF502-12BLK AF502-12S -12 AF504-12 AF504-12BLK AF504-12S
-16 AF502-16 AF502-16BLK AF502-16S -16 AF504-16 AF504-16BLK AF504-16S
-20 AF502-20 AF502-20BLK AF502-20S -20 AF504-20 AF504-20BLK AF504-20S

38 aeroflowperformance.com
 500 SERIES CUTTER FITTINGS

180° SWIVEL CUTTER HOSE ENDS

150° SWIVEL CUTTER HOSE ENDS
AN Blue/Red Black Silver
AN Blue/Red Black Silver -4 AF506-04 AF506-04BLK AF506-04S
-4 AF505-04 AF505-04BLK AF505-04S -6 AF506-06 AF506-06BLK AF506-06S
-6 AF505-06 AF505-06BLK AF505-06S -8 AF506-08 AF506-08BLK AF506-08S
-8 AF505-08 AF505-08BLK AF505-08S -10 AF506-10 AF506-10BLK AF506-10S
-10 AF505-10 AF505-10BLK AF505-10S -12 AF506-12 AF506-12BLK AF506-12S
-12 AF505-12 AF505-12BLK AF505-12S -16 AF506-16 AF506-16BLK AF506-16S
-16 AF505-16 AF505-16BLK AF505-16S -20 AF506-20 AF506-20BLK AF506-20S
-20 AF505-20 AF505-20BLK AF505-20S

FITTINGS & ADAPTERS

HOSE END SOCKETS to suit Cutter Style - ALLOY
(suits 500 - 550 - 880 series fittings only)
Aeroflow Performance offers hose end sockets separately. These sockets are for use on all of our 500, 550 & 880 series two piece
cutter-style hose ends. This gives an excellent option for multiple colour combinations providing a unique combination of colours not found in other brands.

AN Blue Red Silver Black Gold Purple Chrome

-4 AF559-04DCBL AF559-04DCR AF559-04DCS AF559-04DCBLK AF559-04DCG AF559-04DCPUR AF559-04DCCH
-6 AF559-06DCBL AF559-06DCR AF559-06DCS AF559-06DCBLK AF559-06DCG AF559-06DCPUR AF559-06DCCH
-8 AF559-08DCBL AF559-08DCR AF559-08DCS AF559-08DCBLK AF559-08DCG AF559-08DCPUR AF559-08DCCH
-10 AF559-10DCBL AF559-10DCR AF559-10DCS AF559-10DCBLK AF559-10DCG AF559-10DCPUR AF559-10DCCH
-12 AF559-12DCBL AF559-12DCR AF559-12DCS AF559-12DCBLK AF559-12DCG AF559-12DCPUR AF559-12DCCH
-16 AF559-16DCBL AF559-16DCR AF559-16DCS AF559-16DCBLK AF559-16DCG AF559-16DCPUR AF559-16DCCH
-20 AF559-20DCBL AF559-20DCR AF559-20DCS AF559-20DCBLK AF559-20DCG AF559-20DCPUR AF559-20DCCH

aeroflowperformance.com 39
 150 SERIES TAPER FITTINGS

For us
HOSE & TUBE

150 Series Taper Style One Piece Full Flow Swivel Hose Ends
(suits 100 & 450 series hose) 100 & 4 e with
50 Serie
Aeroflow’s 150 Series Taper fittings are a CNC machined one piece fitting which provide
Hose s
uninterrupted flow. The taper design provides straight through connection with easy
S
See Pag
alignment. Upon assembly a tube end compresses the hose into a purpose designed e 16 & 1
socket allowing for a leak free fitting. The tight mandrel bent radius body has superior 7
wall thickness and a swivel head allowing 360 Degree rotation to allow for easy
LIGHT WEIGHT

adjustment. Aeroflow’s 150 series fittings are a must for any serious racer for use in
fuel systems, cooling systems, vacuum applications and oil systems.
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
• Not compatible for power steering and automatic transmission line applications.
• Hard Anodised (excluding silver)
FITTINGS
BRAKE

STRAIGHT HOSE ENDS

60° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver
-4 AF101-04 AF101-04BLK AF101-04S AN Blue/Red Black Silver
-6 AF101-06 AF101-06BLK AF101-06S -4 AF198-04 AF198-04BLK AF198-04S
-8 AF101-08 AF101-08BLK AF101-08S
HARDLINE

-6 AF198-06 AF198-06BLK AF198-06S

-10 AF101-10 AF101-10BLK AF101-10S -8 AF198-08 AF198-08BLK AF198-08S
-12 AF101-12 AF101-12BLK AF101-12S -10 AF198-10 AF198-10BLK AF198-10S
-16 AF101-16 AF101-16BLK AF101-16S -12 AF198-12 AF198-12BLK AF198-12S
-20 AF101-20 AF101-20BLK AF101-20S -16 AF198-16 AF198-16BLK AF198-16S
These part numbers are available in packs of 25 fittings.
Add -25 to end of part number eg. AF101-06BLK-25
ENGINE & ADAPTERS
FITTINGS TANKS

30° FULL FLOW SWIVEL HOSE ENDS 90° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver
AN Blue/Red Black Silver
SILICONE

-4 AF153-04 AF153-04BLK AF153-04S

-4 AF197-04 AF197-04BLK AF197-04S
-6 AF153-06 AF153-06BLK AF153-06S
-6 AF197-06 AF197-06BLK AF197-06S
-8 AF153-08 AF153-08BLK AF153-08S
-8 AF197-08 AF197-08BLK AF197-08S
-10 AF153-10 AF153-10BLK AF153-10S
-10 AF197-10 AF197-10BLK AF197-10S
-12 AF153-12 AF153-12BLK AF153-12S
-12 AF197-12 AF197-12BLK AF197-12S
-16 AF153-16 AF153-16BLK AF153-16S
-16 AF197-16 AF197-16BLK AF197-16S
FABRICATION

-20 AF153-20 AF153-20BLK AF153-20S

TOOLS

45° FULL FLOW SWIVEL HOSE ENDS 120° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver
APPAREL

AN Blue/Red Black Silver

-4 AF152-04 AF152-04BLK AF152-04S
-4 AF154-04 AF154-04BLK AF154-04S
-6 AF152-06 AF152-06BLK AF152-06S
-6 AF154-06 AF154-06BLK AF154-06S
-8 AF152-08 AF152-08BLK AF152-08S
-8 AF154-08 AF154-08BLK AF154-08S
-10 AF152-10 AF152-10BLK AF152-10S
-10 AF154-10 AF154-10BLK AF154-10S
-12 AF152-12 AF152-12BLK AF152-12S
INSTRUCTIONS

-12 AF154-12 AF154-12BLK AF154-12S

-16 AF152-16 AF152-16BLK AF152-16S
-16 AF154-16 AF154-16BLK AF154-16S
-20 AF152-20 AF152-20BLK AF152-20S

40 aeroflowperformance.com
 150 SERIES TAPER FITTINGS

150° FULL FLOW SWIVEL HOSE ENDS 180° FULL FLOW SWIVEL HOSE ENDS
AN Blue/Red Black Silver AN Blue/Red Black Silver
-4 AF155-04 AF155-04BLK AF155-04S -4 AF159-04 AF159-04BLK AF159-04S
-6 AF155-06 AF155-06BLK AF155-06S -6 AF159-06 AF159-06BLK AF159-06S
-8 AF155-08 AF155-08BLK AF155-08S -8 AF159-08 AF159-08BLK AF159-08S
-10 AF155-10 AF155-10BLK AF155-10S -10 AF159-10 AF159-10BLK AF159-10S
-12 AF155-12 AF155-12BLK AF155-12S -12 AF159-12 AF159-12BLK AF159-12S
-16 AF155-16 AF155-16BLK AF155-16S -16 AF159-16 AF159-16BLK AF159-16S

For us
100 & 4 e with
HOSE AND FITTING 50 Serie
Hose s
INSTALLATION
S
See Pag
TOOL KIT e 16 & 1
Aeroflow has designed this rotary vice
7
to make the installation of our 100 and
150 series taper AN fittings easier. The
installation kit comes with everything
you need to install AN fittings quickly

FITTINGS & ADAPTERS

and without damaging or marking the
fittings. Furthermore, with a few simple
adjustments Aeroflow’s Hose and
Fitting Installation Kit transforms
into a vice. For more details and
instructions on how to use the
kit please see page 434 of this
catalogue.

AF98-2000
Hose Installation Kit

aeroflowperformance.com 41
 100 SERIES TAPER FITTINGS

Hose Ends – 100 Series Swivel Taper Hose Ends

(suits 100 & 450 series hose)
Aeroflow’s 100 Series Taper fittings are a braised full flow fitting with a taper design
that provides straight through connection with easy alignment. Upon assembly, a
tube end compresses the hose into a purpose designed socket allowing for a leak
free fitting. All angles are mandrel bent, eliminating sharp changes in direction
for optimum flow. Our 100 Series fittings allows 360 Degree rotation to allow for For us
easy adjustment making them and an excellent choice for the automotive
100 & 4 e with
enthusiast for use in fuel systems, cooling systems, vacuum applications and oil systems. 50 Serie
Compatible hose: 100 Series S/S braid, 450 Series Lightweight Nylon braid
Hose s
• Not compatible for power steering and automatic transmission line applications.
S
See Pag
• Hard Anodised (excluding silver)
e 16 & 1
7

STRAIGHT HOSE ENDS

AN Blue/Red Black Silver 60° SWIVEL HOSE ENDS
-4 AF101-04 AF101-04BLK AF101-04S
-6 AF101-06 AF101-06BLK AF101-06S AN Blue/Red Black Silver
-8 AF101-08 AF101-08BLK AF101-08S
-4 AF118-04 AF118-04BLK AF118-04S
-10 AF101-10 AF101-10BLK AF101-10S
-6 AF118-06 AF118-06BLK AF118-06S
-12 AF101-12 AF101-12BLK AF101-12S
-8 AF118-08 AF118-08BLK AF118-08S
-16 AF101-16 AF101-16BLK AF101-16S
-10 AF118-10 AF118-10BLK AF118-10S
-20 AF101-20 AF101-20BLK AF101-20S
-12 AF118-12 AF118-12BLK AF118-12S
These part numbers are available in packs of 25 fittings. -16 AF118-16 AF118-16BLK AF118-16S
Add -25 to end of part number eg. AF101-06BLK-25 -20 AF118-20 AF118-20BLK AF118-20S
FITTINGS & ADAPTERS

30° SWIVEL HOSE ENDS 90° SWIVEL HOSE ENDS

AN Blue/Red Black Silver AN Blue/Red Black Silver
-4 AF117-04 AF117-04BLK AF117-04S -4 AF103-04 AF103-04BLK AF103-04S
-6 AF117-06 AF117-06BLK AF117-06S -6 AF103-06 AF103-06BLK AF103-06S
-8 AF117-08 AF117-08BLK AF117-08S -8 AF103-08 AF103-08BLK AF103-08S
-10 AF117-10 AF117-10BLK AF117-10S -10 AF103-10 AF103-10BLK AF103-10S
-12 AF117-12 AF117-12BLK AF117-12S -12 AF103-12 AF103-12BLK AF103-12S
-16 AF117-16 AF117-16BLK AF117-16S -16 AF103-16 AF103-16BLK AF103-16S
-20 AF117-20 AF117-20BLK AF117-20S -20 AF103-20 AF103-20BLK AF103-20S
These part numbers are available in packs of 25 fittings.
Add -25 to end of part number eg. AF103-06BLK-25

45° SWIVEL HOSE ENDS 150° SWIVEL HOSE ENDS

AN Blue/Red Black Silver AN Blue/Red Black Silver
-4 AF102-04 AF102-04BLK AF102-04S -4 AF105-04 AF105-04BLK AF105-04S
-6 AF102-06 AF102-06BLK AF102-06S -6 AF105-06 AF105-06BLK AF105-06S
-8 AF102-08 AF102-08BLK AF102-08S -8 AF105-08 AF105-08BLK AF105-08S
-10 AF102-10 AF102-10BLK AF102-10S -10 AF105-10 AF105-10BLK AF105-10S
-12 AF102-12 AF102-12BLK AF102-12S -12 AF105-12 AF105-12BLK AF105-12S
-16 AF102-16 AF102-16BLK AF102-16S -16 AF105-16 AF105-16BLK AF105-16S
-20 AF102-20 AF102-20BLK AF102-20S -20 AF105-20 AF105-20BLK AF105-20S

42 aeroflowperformance.com
 100 SERIES TAPER FITTINGS

120° SWIVEL HOSE ENDS 180° SWIVEL HOSE ENDS

AN Blue/Red Black Silver AN Blue/Red Black Silver
-4 AF104-04 AF104-04BLK AF104-04S -4 AF106-04 AF106-04BLK AF106-04S
-6 AF104-06 AF104-06BLK AF104-06S -6 AF106-06 AF106-06BLK AF106-06S
-8 AF104-08 AF104-08BLK AF104-08S -8 AF106-08 AF106-08BLK AF106-08S
-10 AF104-10 AF104-10BLK AF104-10S -10 AF106-10 AF106-10BLK AF106-10S
-12 AF104-12 AF104-12BLK AF104-12S -12 AF106-12 AF106-12BLK AF106-12S
-16 AF104-16 AF104-16BLK AF104-16S -16 AF106-16 AF106-16BLK AF106-16S
-20 AF104-20 AF104-20BLK AF104-20S -20 AF106-20 AF106-20BLK AF106-20S

FITTINGS & ADAPTERS

HOSE END SOCKETS to suit Taper Style - ALLOY (suits 100 - 150 series fittings only)
Aeroflow Performance offers hose end sockets separately. These sockets are for use on all of our 100 & 150 series two piece hose ends.
This gives an excellent option for multiple colour combinations providing a unique combination of colours not found in other brands.

AN Blue Red Silver Black Gold Purple Chrome

-4 AF298-04DBL AF298-04DR AF298-04DS AF298-04DBLK AF298-04DG AF298-04DPUR AF298-04DCH
-6 AF298-06DBL AF298-06DR AF298-06DS AF298-06DBLK AF298-06DG AF298-06DPUR AF298-06DCH
-8 AF298-08DBL AF298-08DR AF298-08DS AF298-08DBLK AF298-08DG AF298-08DPUR AF298-08DCH
-10 AF298-10DBL AF298-10DR AF298-10DS AF298-10DBLK AF298-10DG AF298-10DPUR AF298-10DCH
-12 AF298-12DBL AF298-12DR AF298-12DS AF298-12DBLK AF298-12DG AF298-12DPUR AF298-12DCH
-16 AF298-16DBL AF298-16DR AF298-16DS AF298-16DBLK AF298-16DG AF298-16DPUR AF298-16DCH
-20 AF298-20DBL AF298-20DR AF298-20DS AF298-20DBLK AF298-20DG AF298-20DPUR AF298-20DCH

aeroflowperformance.com 43
 FORGED MALE ADAPTER FITTINGS

Taper Style Forged Male Adapter

Style Hose Ends
(Suits 100 & 450 series hose)
For use
100 & 4 w ith
Aeroflow’s male adapter taper style
50 Serie
forged hose ends are designed to allow
Hos s
See Pag e
the hose end to be threaded directly into
a female port without the extra cost and e 16 & 1
complication of an adapter fitting. Made from 7
6061-T6 aluminium, this design ensures a secure,
leak free connection every time. Aeroflow’s corrosion
resistant, colour consistent, Hard anodised (excluding silver) adds the
final touch of quality and protection you have come to expect from
Aeroflow. 90° NPT SWIVEL HOSE ENDS
NPT to AN Blue/Red Black Silver
1/8” to -6 AF829-06-02 AF829-06-02BLK AF829-06-02S
1/4” to -6 AF829-06-04 AF829-06-04BLK AF829-06-04S
3/8” to -6 AF829-06-06 AF829-06-06BLK AF829-06-06S
1/4” to -8 AF829-08-04 AF829-08-04BLK AF829-08-04S
3/8” to -8 AF829-08-06 AF829-08-06BLK AF829-08-06S
1/2” to -8 AF829-08-08 AF829-08-08BLK AF829-08-08S
3/8” to -10 AF829-10-06 AF829-10-06BLK AF829-10-06S
1/2” to -10 AF829-10-08 AF829-10-08BLK AF829-10-08S
1/2” to -12 AF829-12-08 AF829-12-08BLK AF829-12-08S
3/4” to -12 AF829-12-12 AF829-12-12BLK AF829-12-12S
3/4” to -16 AF829-16-12 AF829-16-12BLK AF829-16-12S
FITTINGS & ADAPTERS

NPT STRAIGHT HOSE ENDS

NPT to AN Blue/Red Black Silver
1/8” to -6 AF830-06-02 AF830-06-02BLK AF830-06-02S
1/4” to -6 AF830-06-04 AF830-06-04BLK AF830-06-04S MALE ORB / AN STRAIGHT HOSE ENDS
3/8” to -6 AF830-06-06 AF830-06-06BLK AF830-06-06S
1/4” to -8 AF830-08-04 AF830-08-04BLK AF830-08-04S AN to Hose Blue/Red Black Silver
3/8” to -8 AF830-08-06 AF830-08-06BLK AF830-08-06S
1/2” to -8 AF830-08-08 AF830-08-08BLK AF830-08-08S -6 to -6 AF840-06 AF840-06BLK AF840-06S
3/8” to -10 AF830-10-06 AF830-10-06BLK AF830-10-06S -8 to -8 AF840-08 AF840-08BLK AF840-08S
1/2” to -10 AF830-10-08 AF830-10-08BLK AF830-10-08S -10 to -10 AF840-10 AF840-10BLK AF840-10S
1/2” to -12 AF830-12-08 AF830-12-08BLK AF830-12-08S -12 to -12 AF840-12 AF840-12BLK AF840-12S
3/4” to -12 AF830-12-12 AF830-12-12BLK AF830-12-12S -16 to -16 AF840-16 AF840-16BLK AF840-16S
3/4” to -16 AF830-16-12 AF830-16-12BLK AF830-16-12S

90° ORB SWIVEL HOSE ENDS

45° NPT SWIVEL HOSE ENDS
ORB to Hose Blue/Red Black Silver
NPT to AN Blue/Red Black Silver -4 to -6 AF849-06-04 AF849-06-04BLK AF849-06-04S
-6 to -6 AF849-06-06 AF849-06-06BLK AF849-06-06S
1/8” to -6 AF828-06-02 AF828-06-02BLK AF828-06-02S
-8 to -6 AF849-06-08 AF849-06-08BLK AF849-06-08S
1/4” to -6 AF828-06-04 AF828-06-04BLK AF828-06-04S
-6 to -8 AF849-08-06 AF849-08-06BLK AF849-08-06S
3/8” to -6 AF828-06-06 AF828-06-06BLK AF828-06-06S
-8 to -8 AF849-08-08 AF849-08-08BLK AF849-08-08S
1/4” to -8 AF828-08-04 AF828-08-04BLK AF828-08-04S
-10 to -8 AF849-08-10 AF849-08-10BLK AF849-08-10S
3/8” to -8 AF828-08-06 AF828-08-06BLK AF828-08-06S
-8 to -10 AF849-10-08 AF849-10-08BLK AF849-10-08S
1/2” to -8 AF828-08-08 AF828-08-08BLK AF828-08-08S
-10 to -10 AF849-10-10 AF849-10-10BLK AF849-10-10S
3/8” to -10 AF828-10-06 AF828-10-06BLK AF828-10-06S
-12 to -10 AF849-10-12 AF849-10-12BLK AF849-10-12S
1/2” to -10 AF828-10-08 AF828-10-08BLK AF828-10-08S
-10 to -12 AF849-12-10 AF849-12-10BLK AF849-12-10S
1/2” to -12 AF828-12-08 AF828-12-08BLK AF828-12-08S
-12 to -12 AF849-12-12 AF849-12-12BLK AF849-12-12S
3/4” to -12 AF828-12-12 AF828-12-12BLK AF828-12-12S
-12 to -16 AF849-16-12 AF849-16-12BLK AF849-16-12S
3/4” to -16 AF828-16-12 AF828-16-12BLK AF828-16-12S
-16 to -12 AF849-12-16 AF849-12-16BLK AF849-12-16S
-16 to -16 AF849-16-16 AF849-16-16BLK AF849-16-16S
44 aeroflowperformance.com
FORGED MALE ADAPTER FITTINGS

45° ORB SWIVEL HOSE ENDS

ORB to Hose Blue/Red Black Silver
-4 to -6 AF844-06-04 AF844-06-04BLK AF844-06-04S
-6 to -6 AF844-06-06 AF844-06-06BLK AF844-06-06S
-8 to -6 AF844-06-08 AF844-06-08BLK AF844-06-08S
-6 to -8 AF844-08-06 AF844-08-06BLK AF844-08-06S
-8 to -8 AF844-08-08 AF844-08-08BLK AF844-08-08S
-10 to -8 AF844-08-10 AF844-08-10BLK AF844-08-10S
-8 to -10 AF844-10-08 AF844-10-08BLK AF844-10-08S
-10 to -10 AF844-10-10 AF844-10-10BLK AF844-10-10S
-12 to -10 AF844-10-12 AF844-10-12BLK AF844-10-12S
-10 to -12 AF844-12-10 AF844-12-10BLK AF844-12-10S
-12 to -12 AF844-12-12 AF844-12-12BLK AF844-12-12S
-12 to -16 AF844-16-12 AF844-16-12BLK AF844-16-12S
-16 to -12 AF844-12-16 AF844-12-16BLK AF844-12-16S
-16 to -16 AF844-16-16 AF844-16-16BLK AF844-16-16S

FITTINGS & ADAPTERS

aeroflowperformance.com 45
 570 SERIES PTFE FITTINGS

200 SERIES PTFE (Teflon®) STAINLESS STEEL

BRAIDED HOSE (suits 200 series fittings)
The Aeroflow 200 series hose has a PTFE inner liner with 308 stain-
less steel braid. It is a durable and professional hose that resists
leaks and fumes. It is rated to up to 4000PSI (275.79Bar).
Note: Please ensure all hose is
• Stainless steel outer cover for excellent abrasion resistance.
• Recommended for Brake, E85, Alcohol, Nitro, transmission, clutch, thoroughly cleaned out before use.

For use with

nitrous, power steering, oiling, hydraulics & vacuum applications.
• Minimum temperature -70oC (-94oF), Maximum temperature
250oC (482oF).
200 & 250 Series Ho
se
See Page 18
570 SERIES One Piece Full Flow Hose Ends
(suits 200 & 250 series hose) ( Suitable for use with PTFE Hose )
Aeroflow’s 570 Series PTFE fittings are a CNC machined one piece fitting which provides
uninterrupted flow. The purpose designed olive compresses into the PTFE (Teflon) inner
tube for easy, leak free assembly. The mandrel bent tight radius body has superior wall
thickness and a swivel head allowing for easy adjustment. Aeroflow’s 570 series fittings are
the choice of professionals for use in power steering, automatic transmission, nitrous, fuel
systems, cooling systems, vacuum applications, oil systems, brake and clutch lines.
We recommend the 200, 250 series hose in E85 applications
Compatible Hose: 200, 250 Series PTFE (Teflon) S/S hose
• Hard Anodised (excluding silver)
FITTINGS & ADAPTERS

STRAIGHT HOSE ENDS

45° HOSE ENDS
AN Blue/Red Black Silver
-3 AF201-03D AF201-03DBLK AF201-03DS AN Blue/Red Black Silver
-4 AF201-04D AF201-04DBLK AF201-04DS -3 AF572-03D AF572-03DBLK AF572-03DS
-6 AF201-06D AF201-06DBLK AF201-06DS -4 AF572-04D AF572-04DBLK AF572-04DS
-8 AF201-08D AF201-08DBLK AF201-08DS -6 AF572-06D AF572-06DBLK AF572-06DS
-10 AF201-10D AF201-10DBLK AF201-10DS -8 AF572-08D AF572-08DBLK AF572-08DS
-12 AF201-12D AF201-12DBLK AF201-12DS -10 AF572-10D AF572-10DBLK AF572-10DS
-16 AF201-16D AF201-16DBLK AF201-16DS -12 AF572-12D AF572-12DBLK AF572-12DS
-20 AF201-20D AF201-20DBLK AF201-20DS -16 AF572-16D AF572-16DBLK AF572-16DS
These part numbers are available in packs of 25 fittings. -20 AF572-20D AF572-20DBLK AF572-20DS
Add -25 to end of part number eg. AF201-06BLK-25

30° HOSE ENDS 60° HOSE ENDS

AN Blue/Red Black Silver AN Blue/Red Black Silver
-3 AF577-03D AF577-03DBLK AF577-03DS -3 AF578-03D AF578-03DBLK AF578-03DS
-4 AF577-04D AF577-04DBLK AF577-04DS -4 AF578-04D AF578-04DBLK AF578-04DS
-6 AF577-06D AF577-06DBLK AF577-06DS -6 AF578-06D AF578-06DBLK AF578-06DS
-8 AF577-08D AF577-08DBLK AF577-08DS -8 AF578-08D AF578-08DBLK AF578-08DS
-10 AF577-10D AF577-10DBLK AF577-10DS -10 AF578-10D AF578-10DBLK AF578-10DS
-12 AF577-12D AF577-12DBLK AF577-12DS -12 AF578-12D AF578-12DBLK AF578-12DS
-16 AF577-16D AF577-16DBLK AF577-16DS -16 AF578-16D AF578-16DBLK AF578-16DS

46 aeroflowperformance.com
 570 SERIES PTFE FITTINGS

90° HOSE ENDS

150° HOSE ENDS
AN Blue/Red Black Silver
AN Blue/Red Black Silver
-3 AF573-03D AF573-03DBLK AF573-03DS
-4 AF573-04D AF573-04DBLK AF573-04DS -3 AF575-03D AF575-03DBLK AF575-03DS
-6 AF573-06D AF573-06DBLK AF573-06DS -4 AF575-04D AF575-04DBLK AF575-04DS
-8 AF573-08D AF573-08DBLK AF573-08DS -6 AF575-06D AF575-06DBLK AF575-06DS
-10 AF573-10D AF573-10DBLK AF573-10DS -8 AF575-08D AF575-08DBLK AF575-08DS
-12 AF573-12D AF573-12DBLK AF573-12DS -10 AF575-10D AF575-10DBLK AF575-10DS
-16 AF573-16D AF573-16DBLK AF573-16DS -12 AF575-12D AF575-12DBLK AF575-12DS
-20 AF573-20D AF573-20DBLK AF573-20DS -16 AF575-16D AF575-16DBLK AF575-16DS

These part numbers are available in packs of 25 fittings.

Add -25 to end of part number eg. AF573-06BLK-25

FITTINGS & ADAPTERS

120° HOSE ENDS 180° HOSE ENDS
AN Blue/Red Black Silver AN Blue/Red Black Silver
-3 AF574-03D AF574-03DBLK AF574-03DS -3 AF576-03D AF576-03DBLK AF576-03DS
-4 AF574-04D AF574-04DBLK AF574-04DS -4 AF576-04D AF576-04DBLK AF576-04DS
-6 AF574-06D AF574-06DBLK AF574-06DS -6 AF576-06D AF576-06DBLK AF576-06DS
-8 AF574-08D AF574-08DBLK AF574-08DS -8 AF576-08D AF576-08DBLK AF576-08DS
-10 AF574-10D AF574-10DBLK AF574-10DS -10 AF576-10D AF576-10DBLK AF576-10DS
-12 AF574-12D AF574-12DBLK AF574-12DS -12 AF576-12D AF576-12DBLK AF576-12DS
-16 AF574-16D AF574-16DBLK AF574-16DS -16 AF576-16D AF576-16DBLK AF576-16DS

90° ORB SWIVEL PTFE HOSE ENDS

Aeroflow Performance male adaptor PTFE style hose ends are now designed
to allow the Teflon hose end to be threaded directly into a female port without
the extra cost and complication of an adapter fitting. The purpose designed
olive compresses into the PTFE inner tube for easy, leak free assembly and
with the 90 degree mandrel angle eliminates sharp changes in direction for
optimum flow. Available in the standard three colours of blue/red, silver and
black with available sizes from -6ORB to -12 ORB.

ORB to Hose Blue/Red Black Silver

-6 to -6 AF583-06-06D AF583-06-06DBLK AF583-06-06DS
-8 to -8 AF583-08-08D AF583-08-08DBLK AF583-08-08DS
-10 to -10 AF583-10-10D AF583-10-10DBLK AF583-10-10DS
-12 to -12 AF583-12-12D AF583-12-12DBLK AF583-12-12DS

aeroflowperformance.com 47
 570 SERIES PTFE FITTINGS

HOSE END SOCKETS to suit PTFE HOSE ENDS (suits 200 & 570 series PTFE fittings only)
Aeroflow offers hose end sockets separately. These sockets are for use on all our 200 & 570 Series PTFE hose ends.
This gives an excellent option for multiple colour combinations providing a unique combination of colours not found in other brands.

AN Blue Red Silver Black Gold Purple Chrome

-3 AF279-03DBL AF279-03DR AF279-03DS AF279-03DBLK AF279-03DG AF279-03DPUR AF279-03DCH
-4 AF279-04DBL AF279-04DR AF279-04DS AF279-04DBLK AF279-04DG AF279-04DPUR AF279-04DCH
-6 AF279-06DBL AF279-06DR AF279-06DS AF279-06DBLK AF279-06DG AF279-06DPUR AF279-06DCH
-8 AF279-08DBL AF279-08DR AF279-08DS AF279-08DBLK AF279-08DG AF279-08DPUR AF279-08DCH
-10 AF279-10DBL AF279-10DR AF279-10DS AF279-10DBLK AF279-10DG AF279-10DPUR AF279-10DCH
-12 AF279-12DBL AF279-12DR AF279-12DS AF279-12DBLK AF279-12DG AF279-12DPUR AF279-12DCH
-16 AF279-16DBL AF279-16DR AF279-16DS AF279-16DBLK AF279-16DG AF279-16DPUR AF279-16DCH
-20 AF279-20DBL AF279-20DR AF279-20DS AF279-20DBLK AF279-20DG AF279-20DPUR AF279-20DCH
FITTINGS & ADAPTERS

ALUMINIUM PTFE
HOSE OLIVE INSERTS
(5 PACK) BRASS PTFE HOSE OLIVE INSERTS
(5 PACK)
Part No Description Part No Description
AF299-03D Alloy Olive Insert suit -3AN AF299-03 Brass Olive Insert suit -3AN
AF299-04D Alloy Olive Insert suit -4AN AF299-04 Brass Olive Insert suit -4AN
AF299-06D Alloy Olive Insert suit -6AN AF299-06 Brass Olive Insert suit -6AN
AF299-08D Alloy Olive Insert suit -8AN AF299-08 Brass Olive Insert suit -8AN
AF299-10D Alloy Olive Insert suit -10AN AF299-10 Brass Olive Insert suit -10AN
AF299-12D Alloy Olive Insert suit -12AN AF299-12 Brass Olive Insert suit -12AN
AF299-16D Alloy Olive Insert suit -16AN AF299-16 Brass Olive Insert suit -16AN
AF299-20D Alloy Olive Insert suit -20AN AF299-20 Brass Olive Insert suit -20AN
Anodised olives are Ethanol / Methanol & Nitro compatible.
Brass olives are Ethanol / Methanol & Nitro compatible.

STAINLESS STEEL PTFE HOSE

OLIVE INSERTS (5 PACK)
Part No Description
AF299-03SS S/S Olive Insert suit -3AN
AF299-04SS S/S Olive Insert suit -4AN
AF299-06SS S/S Olive Insert suit -6AN
AF299-08SS S/S Olive Insert suit -8AN
AF299-10SS S/S Olive Insert suit -10AN
AF299-12SS S/S Olive Insert suit -12AN
AF299-16SS S/S Olive Insert suit -16AN
AF299-20SS S/S Olive Insert suit -20AN
S/S Olives are Ethanol / Methanol & Nitro compatible.

48 aeroflowperformance.com
 200 SERIES PTFE FITTINGS

200 Series Hose Ends For us

(suits 200 & 250 series hose) (Suitable for use with PTFE Hose) 200 & 250 e with
Series Hos
Aeroflow’s 200 Series PTFE fittings are a braised full flow fitting. The purpose designed olive
compresses into the PTFE (Teflon) inner tube for easy, leak free assembly. All angles are mandrel See Page 1 e
bent, eliminating sharp changes in direction for optimum flow. Our 200 Series fittings allows 360 8
Degree rotation to allow for easy adjustment making them an excellent choice for the
automotive enthusiast for use in power steering, automatic transmission, nitrous,
fuel systems, cooling systems, vacuum applications, oil systems, brake
and clutch lines.
We recommend the 200, 250 series in E85 applications.
Compatible Hose: 200, 250 Series PTFE (Teflon) S/S hose
• Hard Anodised (excluding silver)

STRAIGHT HOSE ENDS 45° HOSE

AN Blue/Red Black Silver ENDS
-3 AF201-03D AF201-03DBLK AF201-03DS
-4 AF201-04D AF201-04DBLK AF201-04DS
-6 AF201-06D AF201-06DBLK AF201-06DS AN Blue/Red Black Silver
-8 AF201-08D AF201-08DBLK AF201-08DS
-10 AF201-10D AF201-10DBLK AF201-10DS -3 AF202-03D AF202-03DBLK AF202-03DS
-12 AF201-12D AF201-12DBLK AF201-12DS -4 AF202-04D AF202-04DBLK AF202-04DS
-16 AF201-16D AF201-16DBLK AF201-16DS -6 AF202-06D AF202-06DBLK AF202-06DS
-20 AF201-20D AF201-20DBLK AF201-20DS -8 AF202-08D AF202-08DBLK AF202-08DS
-10 AF202-10D AF202-10DBLK AF202-10DS
-12 AF202-12D AF202-12DBLK AF202-12DS
-16 AF202-16D AF202-16DBLK AF202-16DS
-20 AF202-20D AF202-20DBLK AF202-20DS

FITTINGS & ADAPTERS

60° HOSE
30° HOSE ENDS ENDS
AN Blue/Red Black Silver
-3 AF207-03D AF207-03DBLK AF207-03DS
-4 AF207-04D AF207-04DBLK AF207-04DS AN Blue/Red Black Silver
-6 AF207-06D AF207-06DBLK AF207-06DS
-8 AF207-08D AF207-08DBLK AF207-08DS -3 AF208-03D AF208-03DBLK AF208-03DS
-10 AF207-10D AF207-10DBLK AF207-10DS -4 AF208-04D AF208-04DBLK AF208-04DS
-12 AF207-12D AF207-12DBLK AF207-12DS -6 AF208-06D AF208-06DBLK AF208-06DS
-16 AF207-16D AF207-16DBLK AF207-16DS -8 AF208-08D AF208-08DBLK AF208-08DS
-20 AF207-20D AF207-20DBLK AF207-20DS -10 AF208-10D AF208-10DBLK AF208-10DS
-12 AF208-12D AF208-12DBLK AF208-12DS
-16 AF208-16D AF208-16DBLK AF208-16DS
-20 AF208-20D AF208-20DBLK AF208-20DS

90° HOSE ENDS 150° HOSE ENDS

AN Blue/Red Black Silver AN Blue/Red Black Silver
-3 AF203-03D AF203-03DBLK AF203-03DS -3 AF205-03D AF205-03DBLK AF205-03DS
-4 AF203-04D AF203-04DBLK AF203-04DS -4 AF205-04D AF205-04DBLK AF205-04DS
-6 AF203-06D AF203-06DBLK AF203-06DS -6 AF205-06D AF205-06DBLK AF205-06DS
-8 AF203-08D AF203-08DBLK AF203-08DS -8 AF205-08D AF205-08DBLK AF205-08DS
-10 AF203-10D AF203-10DBLK AF203-10DS -10 AF205-10D AF205-10DBLK AF205-10DS
-12 AF203-12D AF203-12DBLK AF203-12DS -12 AF205-12D AF205-12DBLK AF205-12DS
-16 AF203-16D AF203-16DBLK AF203-16DS -16 AF205-16D AF205-16DBLK AF205-16DS
-20 AF203-20D AF203-20DBLK AF203-20DS -20 AF205-20D AF205-20DBLK AF205-20DS

aeroflowperformance.com 49
 200 SERIES PTFE FITTINGS

120° HOSE ENDS 180° HOSE ENDS

AN Blue/Red Black Silver AN Blue/Red Black Silver
-3 AF204-03D AF204-03DBLK AF204-03DS -3 AF206-03D AF206-03DBLK AF206-03DS
-4 AF204-04D AF204-04DBLK AF204-04DS -4 AF206-04D AF206-04DBLK AF206-04DS
-6 AF204-06D AF204-06DBLK AF204-06DS -6 AF206-06D AF206-06DBLK AF206-06DS
-8 AF204-08D AF204-08DBLK AF204-08DS -8 AF206-08D AF206-08DBLK AF206-08DS
-10 AF204-10D AF204-10DBLK AF204-10DS -10 AF206-10D AF206-10DBLK AF206-10DS
-12 AF204-12D AF204-12DBLK AF204-12DS -12 AF206-12D AF206-12DBLK AF206-12DS
-16 AF204-16D AF204-16DBLK AF204-16DS -16 AF206-16D AF206-16DBLK AF206-16DS
-20 AF204-20D AF204-20DBLK AF204-20DS -20 AF206-20D AF206-20DBLK AF206-20DS
FITTINGS & ADAPTERS

500 Ser
ie
Part No s Hose
& Sp
See Pag ecs
e 21

Inner L
iner
E85 & M
ethano
Compa l
500 SERIES PUSH LOCK HOSE (suits 400 & 510 series hose ends) tible

Aeroflow 500 series push lock hose is designed for the use with our push-on fittings. Available in black ONLY.
Constructed from an outside layer of chlorinated polyethylene (CPE). This withstands higher temperatures and
better weather resistance with an oil resistant, tough textured outer cover.
Nylon reinforced to provide strength whilst keeping the flexibility in the hose.
Approved for use with leaded and unleaded gasoline, diesel and gasoline blends of ethanol (E85), methanol,
petroleum oils, lubricants, coolant systems, low pressure brake / clutch reservoirs line, low pressure power steering
lines and transmission cooler lines.

• Temp range -40oC (-40oF) to 125oC (257oF)

• Working pressure 290 PSI (20 BAR)

NOTE: CLAMPS MUST BE USED ON ALL APPLICATIONS OVER 60oC (140oF)

AND OVER 60 PSI OF PRESSURE.
NOT SUITABLE FOR ANY SUBMERSIBLE APPLICATIONS.
Note: Please ensure all
Note. Due to the use of unknown additives in some fuels, we are unable to guarantee our rubber hoses
compatibility with all fuels unless otherwise stated. hose is thoroughly cleaned
We recommend the use of Aeroflows PTFE series hose for all other types of fuels. out before use.

50 aeroflowperformance.com
 510 SERIES PUSH LOCK FITTINGS

400 Ser
400 SERIES PUSH LOCK HOSE ie
Part No s Hose
(suits 400 & 510 series hose ends) & Sp
See Pag ecs
Aeroflow 400 series push lock hose is designed for the use with our push-on fittings.
Available in black and blue.
e 20
• For use with fuel systems, E85, E10, methanol, oils, lubricants, coolant systems
and low pressure brake/clutch reservoir line.
• Temp range -40oC (-40oF) to 100oC (212oF)
• Working pressure 250 PSI (17 BAR)

NOTE: ON OILING SYSTEMS AND ON ALL EFI FUEL

SYSTEMS CLAMPS MUST BE USED TO SECURE HOSE ENDS.
NOT SUITABLE FOR SUBMERSIBLE APPLICATIONS USING UNLEADED
FUELS.
Note. Due to the use of unknown additives in some fuels, we are unable to
guarantee our rubber hoses
compatibility with all fuels unless otherwise stated.
We recommend the use of Aeroflows PTFE series hose for all other types of fuels.
NOTE: Use Aero clamps to secure hose to fittings. See page 21 or 404
NOT FOR USE WITH POWER STEERING OR TRANSMISSION & OIL COOLER
LINES

510 SERIES FULL FLOW TIGHT RADIUS PUSH

LOCK HOSE ENDS
For u
Aeroflow’s 510 series push lock fittings are a CNC machined one piece fitting which provide uninterrupted flow. 400 & 500 se with
The mandrel bent tight radius body has superior wall thickness with a custom designed barbed end to allow a Series Ho
quick, easy and leak free assembly. Aeroflow’s push lock fittings come with a purpose designed cover to hide
See Page se
20
the messy cut end of the hose to give you that professional look everytime.
Compatible Hose: 400 & 500 Series Push lock hose (Blue/Black)
Silver

FITTINGS & ADAPTERS

• Hard Anodised (excluding silver)

STRAIGHT PUSH LOCK HOSE ENDS

45° PUSH LOCK HOSE ENDS
AN Blue Black Silver
AN Blue Black Silver
-4 AF401-04 AF401-04BLK AF401-04S
-6 AF401-06 AF401-06BLK AF401-06S -4 AF512-04 AF512-04BLK AF512-04S
-8 AF401-08 AF401-08BLK AF401-08S -6 AF512-06 AF512-06BLK AF512-06S
-10 AF401-10 AF401-10BLK AF401-10S -8 AF512-08 AF512-08BLK AF512-08S
-12 AF401-12 AF401-12BLK AF401-12S -10 AF512-10 AF512-10BLK AF512-10S
These part numbers are available in packs of 25 fittings. -12 AF512-12 AF512-12BLK AF512-12S
Add -25 to end of part number eg. AF401-06BLK-25

30° PUSH LOCK HOSE ENDS 60° PUSH LOCK HOSE ENDS
AN Blue Black Silver AN Blue Black Silver
-4 AF517-04 AF517-04BLK AF517-04S -4 AF518-04 AF518-04BLK AF518-04S
-6 AF517-06 AF517-06BLK AF517-06S -6 AF518-06 AF518-06BLK AF518-06S
-8 AF517-08 AF517-08BLK AF517-08S -8 AF518-08 AF518-08BLK AF518-08S
-10 AF517-10 AF517-10BLK AF517-10S -10 AF518-10 AF518-10BLK AF518-10S
-12 AF517-12 AF517-12BLK AF517-12S -12 AF518-12 AF518-12BLK AF518-12S

aeroflowperformance.com 51
 510 SERIES PUSH LOCK FITTINGS

90° PUSH LOCK HOSE ENDS

150° PUSH LOCK HOSE ENDS
AN Blue Black Silver
AN Blue Black Silver
-4 AF513-04 AF513-04BLK AF513-04S
-6 AF513-06 AF513-06BLK AF513-06S -4 AF515-04 AF515-04BLK AF515-04S
-8 AF513-08 AF513-08BLK AF513-08S -6 AF515-06 AF515-06BLK AF515-06S
-10 AF513-10 AF513-10BLK AF513-10S -8 AF515-08 AF515-08BLK AF515-08S
-12 AF513-12 AF513-12BLK AF513-12S -10 AF515-10 AF515-10BLK AF515-10S
These part numbers are available in packs of 25 fittings. -12 AF515-12 AF515-12BLK AF515-12S
Add -25 to end of part number eg. AF513-06BLK-25

120° PUSH LOCK HOSE ENDS 180° PUSH LOCK HOSE ENDS
FITTINGS & ADAPTERS

AN Blue Black Silver AN Blue Black Silver

-4 AF514-04 AF514-04BLK AF514-04S -4 AF516-04 AF516-04BLK AF516-04S
-6 AF514-06 AF514-06BLK AF514-06S -6 AF516-06 AF516-06BLK AF516-06S
-8 AF514-08 AF514-08BLK AF514-08S -8 AF516-08 AF516-08BLK AF516-08S
-10 AF514-10 AF514-10BLK AF514-10S -10 AF516-10 AF516-10BLK AF516-10S
-12 AF514-12 AF514-12BLK AF514-12S -12 AF516-12 AF516-12BLK AF516-12S

400 Series Push Lock Hose Ends

For u
400 & 500 se with
Aeroflow’s 400 series push lock fittings are a mandrel bent braised full flow fitting with a custom designed
barbed end to allow a quick, easy and leak free assembly. Aeroflow’s push lock fittings come with a purpose

Series
designed cover to hide the messy cut end of the hose to give you that professional look everytime.

See Page Hose

Compatible Hose: 400 & 500 Series Push lock hose (Blue/Black)
• Not compatible for power steering and automatic transmission line applications.

NOTE: ON OILING SYSTEMS AND ON ALL EFI FUEL

20 Silver
SYSTEMS CLAMPS MUST BE USED TO SECURE HOSE ENDS.

STRAIGHT PUSH LOCK HOSE ENDS 30° PUSH LOCK HOSE ENDS
AN Blue Black Silver
AN Blue Black Silver
-4 AF401-04 AF401-04BLK AF401-04S
-6 AF401-06 AF401-06BLK AF401-06S -4 AF417-04 AF417-04BLK AF417-04S
-8 AF401-08 AF401-08BLK AF401-08S -6 AF417-06 AF417-06BLK AF417-06S
-10 AF401-10 AF401-10BLK AF401-10S -8 AF417-08 AF417-08BLK AF417-08S
-12 AF401-12 AF401-12BLK AF401-12S -10 AF417-10 AF417-10BLK AF417-10S
-12 AF417-12 AF417-12BLK AF417-12S

52 aeroflowperformance.com
 400 SERIES PUSH LOCK FITTINGS

45° PUSH LOCK HOSE ENDS 120° PUSH LOCK HOSE ENDS
AN Blue Black Silver AN Blue Black Silver
-4 AF402-04 AF402-04BLK AF402-04S -4 AF404-04 AF404-04BLK AF404-04S
-6 AF402-06 AF402-06BLK AF402-06S -6 AF404-06 AF404-06BLK AF404-06S
-8 AF402-08 AF402-08BLK AF402-08S -8 AF404-08 AF404-08BLK AF404-08S
-10 AF402-10 AF402-10BLK AF402-10S -10 AF404-10 AF404-10BLK AF404-10S
-12 AF402-12 AF402-12BLK AF402-12S -12 AF404-12 AF404-12BLK AF404-12S

FITTINGS & ADAPTERS

60° PUSH LOCK HOSE ENDS 150° PUSH LOCK HOSE ENDS
AN Blue Black Silver AN Blue Black Silver
-4 AF418-04 AF418-04BLK AF418-04S -4 AF405-04 AF405-04BLK AF405-04S
-6 AF418-06 AF418-06BLK AF418-06S -6 AF405-06 AF405-06BLK AF405-06S
-8 AF418-08 AF418-08BLK AF418-08S -8 AF405-08 AF405-08BLK AF405-08S
-10 AF418-10 AF418-10BLK AF418-10S -10 AF405-10 AF405-10BLK AF405-10S
-12 AF418-12 AF418-12BLK AF418-12S -12 AF405-12 AF405-12BLK* AF405-12S
*NOTE: Discontinued use AF515-12BLK see page 52

180° PUSH LOCK HOSE ENDS

90° PUSH LOCK HOSE ENDS AN Blue Black Silver
AN Blue Black Silver -4 AF406-04 AF406-04BLK AF406-04S
-6 AF406-06 AF406-06BLK AF406-06S
-4 AF403-04 AF403-04BLK AF403-04S -8 AF406-08 AF406-08BLK AF406-08S
-6 AF403-06 AF403-06BLK AF403-06S -10 AF406-10 AF406-10BLK AF406-10S
-8 AF403-08 AF403-08BLK AF403-08S -12 AF406-12 AF406-12BLK AF406-12S
-10 AF403-10 AF403-10BLK AF403-10S
-12 AF403-12 AF403-12BLK AF403-12S
These part numbers are available in packs of 25 fittings.
Add -25 to end of part number eg. AF403-06BLK-25

aeroflowperformance.com 53
 120 SERIES PUSH TO CONNECT

120 SERIES NYLON HOSE

(suits 120 series fittings)
Aeroflow’s flexible black nylon hose is ideal for vacuum, air, oil, fuel and low pressure
hydraulic lines and to be used with Aeroflow’s 120 Series Push-to-connect aluminium fittings.
The nylon hose has an extremely smooth inner surface with a very low coefficient.
• Max Bend Radius 25mm 63/64” • Burst Pressure 1000 PSI (68.95 Bar)
• Working Pressure Mpa 1.7, 250PSI , 17.2 Bar • Safe for use with water methanol kits.
• Temperature range -40 C (-40oF) to 90 C (194oF) • Wall Thickness 3/64” (1mm)

Size 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16”
4.76mm 3/16” AF120-187-1M AF120-187-2M AF120-187-4.5M AF120-187-6M AF120-187-15M
6.35mm 1/4” AF120-250-1M AF120-250-2M AF120-250-4.5M AF120-250-6M AF120-250-15M
7.94mm 5/16” AF120-312-1M AF120-312-2M AF120-312-4.5M AF120-312-6M AF120-312-15M

We recommend 200 series cutters (AF98-2016) for a clean cut.

90o AN NYLON PUSH TO CONNECT

AN to Nylon Blue Black Silver
120 Series Push-To-Connect -3AN - 4.76mm (3/16”) AF123-03-02 AF123-03-02BLK AF123-03-02S
-4AN - 6.35mm (1/4”) AF123-04-04 AF123-04-04BLK AF123-04-04S
Aluminium Fittings
Aeroflow’s Aluminium Push-to-connect fittings are perfect for Pneumatic
FITTINGS & ADAPTERS

applications. Aeroflow’s technically superior fittings are a great compact

design and extremely easy to install. The hose ends are self-sealing.
• Do not use sealants such as PTFE tape on hose ends.

NPT NYLON PUSH TO CONNECT TEE

STRAIGHT NPT NYLON PUSH TO CONNECT
NPT to Nylon Blue Black Silver
NPT to Nylon Blue Black Silver
1/8” - 4.76mm (3/16”) AF124-02 AF124-02BLK AF124-02S
1/8” - 4.76mm (3/16”) AF121-02 AF121-02BLK AF121-02S 1/8” - 6.35mm (1/4”) AF124-04-02 AF124-04-02BLK AF124-04-02S
1/8” - 6.35mm (1/4”) AF121-04-02 AF121-04-02BLK AF121-04-02S 1/4” - 6.35mm (1/4”) AF124-04 AF124-04BLK AF124-04S
1/4” - 6.35mm (1/4”) AF121-04 AF121-04BLK AF121-04S

90o NPT NYLON PUSH TO CONNECT NYLON PUSH TO CONNECT TEE

NPT to Nylon Blue Black Silver Nylon Blue Black Silver
1/8” - 4.76mm (3/16”) AF123-02 AF123-02BLK AF123-02S
3/16” AF125-02 AF125-02BLK AF125-02S
1/8” - 6.35mm (1/4”) AF123-04-02 AF123-04-02BLK AF123-04-02S
1/4” AF125-04 AF125-04BLK AF125-04S
1/4” - 6.35mm (1/4”) AF123-04 AF123-04BLK AF123-04S

54 aeroflowperformance.com
 BARB FITTINGS

Barb sizes
suit 400 & 500
series hose.

BARB to AN FLARE ADAPTERS

No welding...no clamps…no hassle with this unique O-ring design. This
MALE NPT to BARB STRAIGHT
revolutionary fitting allows you to convert any barb plastic or metal over to
the ever popular range of AN style fittings in our inventory. Sizes range from NPT to Barb Blue Black Silver
5/16” to 3/4” barb sizes which accommodates a variety of electric oil and fuel
1/16” to 1/4” 6.35mm AF841-04-01 AF841-04-01BLK AF841-04-01S
pumps.
1/8” to 3/16” 4.76mm AF841-03-04 AF841-03-04BLK AF841-03-04S
1/8” to 1/4” 6.35mm AF841-04 AF841-04BLK AF841-04S
Barb to AN Blue Black Silver 1/8” to 5/16” 7.93mm AF841-05 AF841-05BLK AF841-05S
1/4” to 3/8” 9.52mm AF841-06 AF841-06BLK AF841-06S
5/16” 7.93mm to -6 AF741-06-05 AF741-06-05BLK AF741-06-05S
3/8” to 5/16” 7.93mm AF841-06-05 AF841-06-05BLK AF841-06-05S
3/8” 9.52mm to -6 AF741-06-06 AF741-06-06BLK AF741-06-06S
3/8” to 3/8” 9.52mm AF841-06-06 AF841-06-06BLK AF841-06-06S
5/16” 7.93mm to -8 AF741-08-05 AF741-08-05BLK AF741-08-05S
3/8” to 1/2” 12.7mm AF841-08 AF841-08BLK AF841-08S
3/8” 9.52mm to -8 AF741-08-06 AF741-08-06BLK AF741-08-06S
3/8” to 5/8” 15.9mm AF841-06-10 AF841-06-10BLK AF841-06-10S
1/2” 12.7mm to -8 AF741-08-08 AF741-08-08BLK AF741-08-08S
1/2” to 3/8” 9.52mm AF841-08-06 AF841-08-06BLK AF841-08-06S
15mm to -8 AF741-08-09 AF741-08-09BLK AF741-08-09S
1/2” to 1/2” 12.7mm AF841-08-08 AF841-08-08BLK AF841-08-08S
1/2” 12.7mm to -10 AF741-10-08 AF741-10-08BLK AF741-10-08S
1/2” to 5/8” 15.9mm AF841-10 AF841-10BLK AF841-10S
15mm to -10 AF741-10-09 AF741-10-09BLK AF741-10-09S
1/2” to 3/4” 19mm AF841-08-12 AF841-08-12BLK AF841-08-12S
5/8” 15.9mm to -10 AF741-10-10 AF741-10-10BLK AF741-10-10S
3/4” to 3/4” 19mm AF841-12 AF841-12BLK AF841-12S
3/4” 19.1mm to -10 AF741-10-12 AF741-10-12BLK AF741-10-12S
5/8” 15.9mm to -12 AF741-12-10 AF741-12-10BLK AF741-12-10S
3/4” 19.1mm to -12 AF741-12-12 AF741-12-12BLK AF741-12-12S

Barb sizes
suit 400 & 500

FITTINGS & ADAPTERS

series hose.

STRAIGHT HOSE BARBS

45° MALE NPT to BARB
AN to Barb Blue Black Silver
NPT to Barb Blue Black Silver
-6 to 5/16” 7.93mm AF411-06-05 AF411-06-05BLK AF411-06-05S
-6 to 3/8” 9.52mm AF411-06 AF411-06BLK AF411-06S 1/8” to 3/16” 4.76mm AF845-03-04 AF845-03-04BLK AF845-03-04S
-8 to 3/8” 9.52mm AF411-08-06 AF411-08-06BLK AF411-08-06S 1/8” to 1/4” 6.35mm AF845-04 AF845-04BLK AF845-04S
-8 to 1/2” 12.7mm AF411-08 AF411-08BLK AF411-08S 1/8” to 5/16” 7.93mm AF845-05 AF845-05BLK AF845-05S
-16 to 1” 25.4mm AF411-16 AF411-16BLK AF411-16S 1/4” to 3/8” 9.52mm AF845-06 AF845-06BLK AF845-06S
-20 to 1-1/2” 38.1mm AF411-20 AF411-20BLK AF411-20S 3/8” to 5/16” 7.93mm AF845-06-05 AF845-06-05BLK AF845-06-05S
3/8” to 3/8” 9.52mm AF845-06-06 AF845-06-06BLK AF845-06-06S
3/8” to 1/2” 12.7mm AF845-08 AF845-08BLK AF845-08S
3/8” to 5/8” 15.9mm AF845-06-10 AF845-06-10BLK AF845-06-10S
1/2” to 5/8” 15.9mm AF845-10 AF845-10BLK AF845-10S
1/2” to 1/2” 12.7mm AF845-08-08 AF845-08-08BLK AF845-08-08S
1/2” to 3/8” 9.52mm AF845-08-06 AF845-08-06BLK AF845-08-06S
1/2” to 3/4” 19mm AF845-08-12 AF845-08-12BLK AF845-08-12S
3/4” to 3/4” 19mm AF845-12 AF845-12BLK AF845-12S

45° HOSE BARBS

AN to Barb Blue Black Silver
-6 to 5/16” 7.93mm AF412-06-05 AF412-06-05BLK AF412-06-05S
-6 to 3/8” 9.52mm AF412-06 AF412-06BLK AF412-06S Barb sizes
-8 to 3/8” 9.52mm AF412-08-06 AF412-08-06BLK AF412-08-06S suit 400 & 500
-8 to 1/2” 12.7mm AF412-08 AF412-08BLK AF412-08S series hose.
90° MALE NPT to BARB
NPT to Barb Blue Black Silver
1/8” to 3/16” 4.76mm AF842-03-04 AF842-03-04BLK AF842-03-04S
1/8” to 1/4” 6.35mm AF842-04 AF842-04BLK AF842-04S
1/8” to 5/16” 7.93mm AF842-05 AF842-05BLK AF842-05S
1/4” to 3/8” 9.52mm AF842-06 AF842-06BLK AF842-06S
3/8” to 5/16” 7.93mm AF842-06-05 AF842-06-05BLK AF842-06-05S
3/8” to 3/8” 9.52mm AF842-06-06 AF842-06-06BLK AF842-06-06S
90° HOSE BARBS 3/8” to 1/2” 12.7mm AF842-08 AF842-08BLK AF842-08S
3/8” to 5/8” 15.9mm AF842-06-10 AF842-06-10BLK AF842-06-10S
1/2” to 5/8” 15.9mm AF842-10 AF842-10BLK AF842-10S
AN to Barb Blue Black Silver
1/2” to 1/2” 12.7mm AF842-08-08 AF842-08-08BLK AF842-08-08S
-6 to 5/16” 7.93mm AF413-06-05 AF413-06-05BLK AF413-06-05S 1/2” to 3/8” 9.52mm AF842-08-06 AF842-08-06BLK AF842-08-06S
-6 to 3/8” 9.52mm AF413-06 AF413-06BLK AF413-06S 1/2” to 3/4” 19mm AF842-08-12 AF842-08-12BLK AF842-08-12S
-8 to 3/8” 9.52mm AF413-08-06 AF413-08-06BLK AF413-08-06S 3/4” to 3/4” 19mm AF842-12 AF842-12BLK AF842-12S
-8 to 1/2” 12.7mm AF413-08 AF413-08BLK AF413-08S
aeroflowperformance.com 55
 BARB FITTINGS

MALE NPT to AN BARB STRAIGHT

Barb sizes suit 100 and 450 series hose.

NPT to Barb Blue Black Silver INLINE BARB WITH 1/8” PORT
1/8” to -4 hose AF841-04AN AF841-04ANBLK AF841-04ANS These Aeroflow billet fuel pressure gauge adapters are ideal for adding a fuel
3/8” to -6 hose AF841-06-06AN AF841-06-06ANBLK AF841-06-06ANS pressure gauge to your fuel system. Made from lightweight aluminium and
1/2” to -8 hose AF841-08-08AN AF841-08-08ANBLK AF841-08-08ANS tapped 1/8” NPT for your fuel gauge, they are available in sizes 5/16” barb
3/8” to -8 hose AF841-08AN AF841-08ANBLK AF841-08ANS and 3/8” barb
1/2” to -10 hose AF841-10AN AF841-10ANBLK AF841-10ANS

Barb Blue Black Silver

7.93mm 5/16” AF138-05 AF138-05BLK AF138-05S
9.52mm 3/8” AF138-06 AF138-06BLK AF138-06S

Barb sizes
45° MALE NPT to AN BARB suit 400 & 500
series hose.
Barb sizes suit 100 and 450 series hose.

NPT to Barb Blue Black Silver

FITTINGS & ADAPTERS

1/8” to -4 hose AF845-04AN AF845-04ANBLK AF845-04ANS

3/8” to -6 hose AF845-06-06AN AF845-06-06ANBLK AF845-06-06ANS
1/2” to -8 hose AF845-08-08AN AF845-08-08ANBLK AF845-08-08ANS
3/8” to -8 hose AF845-08AN AF845-08ANBLK AF845-08ANS
1/2” to -10 hose AF845-10AN AF845-10ANBLK AF845-10ANS

MALE TO MALE BARB PUSH LOCK ADAPTERS

Size Blue Black Silver
-4 AF410-04 AF410-04BLK AF410-04S
-5 AF410-05 AF410-05BLK AF410-05S
-6 AF410-06 AF410-06BLK AF410-06S
-5 to -6 AF410-06-05 AF410-06-05BLK AF410-06-05S
-6 to -8 AF410-08-06 AF410-08-06BLK AF410-08-06S
90° MALE NPT to AN BARB -8
-8 to -10
AF410-08
AF410-10-08
AF410-08BLK
AF410-10-08BLK
AF410-08S
AF410-10-08S
Barb sizes suit 100 and 450 series hose.
-10 AF410-10 AF410-10BLK AF410-10S
-10 to -12 AF410-12-10 AF410-12-10BLK AF410-12-10S
NPT to Barb Blue Black Silver -12 AF410-12 AF410-12BLK AF410-12S
1/8” to -4 hose AF842-04AN AF842-04ANBLK AF842-04ANS
3/8” to -6 hose AF842-06-06AN AF842-06-06ANBLK AF842-06-06ANS
1/2” to -8 hose AF842-08-08AN AF842-08-08ANBLK AF842-08-08ANS
3/8” to -8 hose AF842-08AN AF842-08ANBLK AF842-08ANS
1/2” to -10 hose AF842-10AN AF842-10ANBLK AF842-10ANS

ALUMINIUM T-PIECES
Diameter (O.D.) Blue Black Silver
90° BARB TO BARB
3.2mm 1/8” AF64-4200 AF64-4200BLK AF64-4200S
Aeroflow’s ever increasing range of hard to find fittings now includes these 90 4mm 5/32” AF64-4201 AF64-4201BLK AF64-4201S
Degree barb to barb fittings. They come in two sizes 5/16” (7.94mm) and 3/8” 5mm 3/16” AF64-4202 AF64-4202BLK AF64-4202S
(9.52mm) and three colour Blue, Black and Silver. 6.35mm 1/4” AF64-4203 AF64-4203BLK AF64-4203S
8mm 5/16” AF64-4204 AF64-4204BLK AF64-4204S
Barb to Barb Blue Black Silver 9.5mm 3/8” AF64-4205 AF64-4205BLK AF64-4205S
12.7mm 1/2” AF64-4206 AF64-4206BLK AF64-4206S
7.94mm 5/16” AF843-05 AF843-05BLK AF843-05S 15.8mm 5/8” AF64-4207 AF64-4207BLK AF64-4207S
9.5mm 3/8” AF843-06 AF843-06BLK AF843-06S

56 aeroflowperformance.com
 BARB & BANJO FITTINGS

HOSE & TUBE

LIGHT WEIGHT
ORB TO BARB
ALLOY BARB BANJOS
ORB to Barb Blue Black Silver
Aeroflow’s banjo to barb fittings are made from 6061 T6 aluminium. They are
-6 to 6.35mm 1/4” AF414-06-04 AF414-06-04BLK AF414-06-04S corrosion resistant, hard anodised (excluding silver).
-6 to 7.93mm 5/16” AF414-06-05 AF414-06-05BLK AF414-06-05S

FITTINGS
-6 to 9.52mm 3/8” AF414-06-06 AF414-06-06BLK AF414-06-06S
-8 to 7.93mm 5/16” AF414-08-05 AF414-08-05BLK AF414-08-05S Banjo to Barb Blue Black Silver
-8 to 9.52mm 3/8” AF414-08-06 AF414-08-06BLK AF414-08-06S
12mm (7/16”) to 8mm (5/16”) AF807-05 AF807-05BLK AF807-05S
-8 to 12.7mm 1/2” AF414-08-08 AF414-08-08BLK AF414-08-08S
12mm (7/16”) to 9.5mm (3/8”) AF807-06 AF807-06BLK AF807-06S
-10 to 9.52mm 3/8” AF414-10-06 AF414-10-06BLK AF414-10-06S
-12 to 9.52mm 3/8” AF414-12-06 AF414-12-06BLK AF414-12-06S
-12 to12.7mm 1/2” AF414-12-08 AF414-12-08BLK AF414-12-08S
-12 to 15.9mm 5/8” AF414-12-10 AF414-12-10BLK AF414-12-10S
-12 to 19mm 3/4” AF414-12-12 AF414-12-12BLK AF414-12-12S

BRAKE
ALLOY AN
BANJOS

HARDLINE
Banjo to AN Blue Black Silver
8mm to -3 AF717-03 AF717-03BLK AF717-03S
10mm or 3/8” to -4 AF718-04 AF718-04BLK AF718-04S
10mm or 3/8” to -6 AF718-06 AF718-06BLK AF718-06S
12mm or 7/16” to -4 AF719-04 AF719-04BLK AF719-04S
METRIC to BARB ADAPTERS 12mm or 7/16” to -6 AF719-06 AF719-06BLK AF719-06S

FITTINGS
TANKS
1/2” or 12mm to -6 AF721-06 AF721-06BLK AF721-06S
14mm or 9/16” to -4 AF720-04 AF720-04BLK AF720-04 S
Thread to Barb Blue Black Silver 14mm or 9/16” to -6 AF720-06 AF720-06BLK AF720-06S
Male 14mm or 9/16” to -8 AF720-08 AF720-08BLK AF720-08S
M10 x 1 to 5/16” AF745-01 AF745-01 BLK AF745-01S 16mm or 5/8” to -6 AF163-06 AF163-06BLK AF163-06S

& ADAPTERS
M10 x 1 to 3/8” AF745-02 AF745-02 BLK AF745-02S 16mm or 5/8” to -10 AF725-10 AF725-10BLK AF725-10S
M10 x 1 to 1/2” AF745-03 AF745-03 BLK AF745-03S 18mm to -4 AF726-04 AF726-04BLK AF726-04S
M12 x 1.5 to 5/16” AF731-01 AF731-01BLK AF731-01S 18mm to -8 AF726-08 AF726-08BLK AF726-08S

ENGINE
M12 x 1.5 to 3/8” AF731-02 AF731-02BLK AF731-02S 18mm to -10 AF726-10 AF726-10BLK AF726-10S
M12 x 1.5 to 1/2” AF731-03 AF731-03BLK AF731-03S
M14 x 1.5 to 5/16” AF746-01 AF746-01BLK AF746-01S
M14 x 1.5 to 3/8” AF746-02 AF746-02BLK AF746-02S
M14 x 1.5 to 1/2” AF746-03 AF746-03BLK AF746-03S STAINLESS STEEL AN BANJO
M14 x 1.5 to 5/8” AF746-04 AF746-04BLK AF746-04S
M18 x 1.5 to 5/16” AF734-05 AF734-05BLK AF734-05S AF720-06SS 14mm or 9/16” to -6 stainless steel banjo
M18 x 1.5 to 3/8” AF734-00 AF734-00BLK AF734-00S

SILICONE
M18 x 1.5 to 1/2” AF734-01 AF734-01BLK AF734-01S
M18 x 1.5 to 5/8” AF734-03 AF734-03BLK AF734-03S
M18 x 1.5 to 3/4” AF734-02 AF734-02BLK AF734-02S
FABRICATION

BANJO BOLTS
Thread Blue Black Silver
3/8” - 20 AF722-03 AF722-03BLK AF722-03S
7/16” - 20 AF722-04 AF722-04BLK AF722-04S
1/2” - 20 AF727-06 AF727-06BLK AF727-06S
9/16” - 24 AF722-06 AF722-06BLK AF722-06S
TOOLS

5/8” - 20 AF726-06 AF726-06BLK AF726-06S

M12 x 1.25 AF723-06 AF723-06BLK AF723-06S
AN FLARE to BARB ADAPTERS M12 x 1.5
M14 x 1.5
AF724-06
AF725-06
AF724-06BLK
AF725-06BLK
AF724-06S
AF725-06S
M16 x 1.5 (Suits -6) AF713-06 AF713-06BLK AF713-06S
AN to Barb Blue Black Silver M16 x 1.5 (Suits -10) AF716-10 AF716-10BLK AF716-10S
-6 to 5/16” 7.93mm AF817-05 AF817-05BLK AF817-05S M18 x 1.5 AF717-10 AF717-10BLK AF717-10S
APPAREL

-6 to 3/8” 9.52mm AF817-06 AF817-06BLK AF817-06S

-8 to 3/8” 9.52mm AF817-06-08 AF817-06-08BLK AF817-06-08S NOTE: Alloy crush washers included
-8 to 1/2” 12.7mm AF817-08 AF817-08BLK AF817-08S Note: See page 90 for longer stainless steel banjo bolts
-10 to 1/2” 12.7mm AF817-10 AF817-10BLK AF817-10S
-10 to 5/8” 15.9mm AF817-10-08 AF817-10-08BLK AF817-10-08S STAINLESS STEEL BANJO BOLT
AF725-06SS M14 x 1.5 stainless steel banjo bolt
INSTRUCTIONS

Note: Can be used as ORB to barb see page 70 for viton o-rings.

aeroflowperformance.com 57
 BANJO FITTINGS

BANJO BOLT FITTING GUIDE

CARBURETTOR BANJO BOLT THREAD
Stromberg 1/2” - 20
Edelbrock
Carter AFB
5/8” - 24
5/8” - 24
PTFE (Teflon) WASHERS (10 PACK)
Demon 9/16” - 24 Washer thickness 1.5mm (1/16”)
BG 9/16” - 24
Holley 2BBL 9/16” - 24
Holley 600-660 series 9/16” - 24 Part No I.D. Sizes O.D. Sizes
Dual feed 4010-4011 9/16” - 24
Dellorto M12 x 1.25 AF176-03 -3AN 9.52mm 3/8” 16mm 41/64”
Solex M12 x 1.25 AF176-04 -4AN 11.11mm 7/16” 17mm 43/64”
Most Honda & Toyota M12 x 1.25 AF176-06 -6AN 14.28mm 9/16” 20mm 51/64”
Webber M12 x 1.50 AF176-08 -8AN 19.05mm 3/4” 25.30mm 63/64”
AF176-10 -10AN 22.22mm 7/8” 28.4mm 1-1/8”
AF176-12 -12AN 26.98mm 1-1/16” 33.3mm 1-5/16”
AF176-16 -16AN 32.94mm 1-19/64” 39.75mm 1-9/16”
AF176-KIT -3AN to -20AN
KIT CONTAINS 10 OF EACH SIZE

ALUMINIUM WASHERS (10 PACK)

Washer thickness .95mm (1/32”)

ALLOY DOUBLE ENDED AN BANJOS Part No I.D. Sizes O.D. Sizes

AF177-03 -3AN 9.52mm 3/8” 16mm 41/64”
Banjo to AN Blue Black Silver AF177-04 -4AN 11.11mm 7/16” 17mm 43/64”
AF177-05 12.7mm - 1/2” 18.7mm 47/64”
12mm or 1/2” to -6 AF721-06-06 AF721-06-06BLK AF721-06-06S AF177-07 13.1mm - 33/64” 18.85mm 47/64”
14mm or 9/16” to -6 AF720-06-06 AF720-06-06BLK AF720-06-06S AF177-06 -6AN 14.28mm 9/16” 20mm 51/64”
Note: More banjo’s available on page 89 - 90 AF177-09 15.87mm - 5/8” 22.05mm 55/64”
AF177-08 19.3mm - 3/4” 22.25mm 7/8”
AF177-10 -10AN 22.22mm 7/8” 28.4mm 1-1/8”
FITTINGS & ADAPTERS

AF177-12 -12AN 26.98mm 1-1/16” 33.3mm 1-5/16”

AF177-16 -16AN 32.94mm 1-19/64” 39.75mm 1-9/16”
AF177-KIT Aluminium washer -3AN to -20AN
KIT CONTAINS 10 OF EACH SIZE

METRIC ALUMINIUM WASHERS (10 PACK)

Washer thickness .95mm (1/32”)

Part No I.D. Sizes O.D. Sizes

ALLOY BANJO WITH BOLT AF171-06 6mm 12.15mm
AF171-08 8mm 14.15mm
To suit Edelbrock Carburettors AF171-10 10mm 15.95mm
AF171-12 12mm 18.15mm
Banjo to Barb Blue Black Silver AF171-14 14mm 20.10mm
15.87mm (5/8”) to 9.52mm (3/8”) AF164-06 AF164-06BLK AF164-06S AF171-16 16mm 22.10mm
AF171-18 18mm 24.20mm
NOTE: 5/8” Banjo bolt included
AF171-20 20mm 26.75mm
AF171-22 22mm 30.10mm
AF171-24 24mm 30.20mm
AF171-KIT Aluminium washer M6 to M24
KIT CONTAINS 10 OF EACH SIZE

BSPP ALUMINIUM WASHERS (10 PACK)

Parallel thread. Washer thickness .95mm (1/32”)

Part No Thread Size I.D. Sizes O.D. Sizes

ALLOY BANJO WITH BOLT AF172-01 1/8” 10mm 25/64” 15.55mm 39/64”
Suits Holley & Barry Grant Carburettors AF172-02 1/4” 13.40mm 17/32” 19.1mm 3/4”
AF172-03 3/8” 16.8mm 21/32” 22.7mm 57/64”
and FiTech EFI throttle bodies AF172-04 1/2” 21.20mm 27/32” 27.05mm 1-1/16”
AF172-05 5/8” 23.2mm 29/32” 29.5mm 1-5/32”
Banjo to AN Blue Black Silver AF172-06 3/4” 26.7mm 1-1/16” 32.7mm 1-9/32”
AF172-KIT Aluminium washer 1/8” to 3/4”
9/16-24” to -6AN AF167-06 AF167-06BLK AF167-06S
KIT CONTAINS 10 OF EACH SIZE

58 aeroflowperformance.com
 COUPLERS

OVER TIGHTENING
A common problem with 37 degree flares on aluminium fittings
and adapters is they can easily be damaged by over-tightening
(see torque specifications information on Page 429. If a fitting has
been over-tightened, it may be damaged and prone to leaks. Dirt
and debris on the 37 degree sealing surfaces are also a common
cause of leaks. To avoid this always use Aeroflow’s dust cap & 45° FEMALE COUPLER
plug kits page 416 when disconnecting hoses to help keep dust,
dirt and other contaminants out of your hose ends and adapters.
Check sealing surfaces are clean and free of damage before AN Blue/Red Black Silver
re-fitting. -3 AF132-03 AF132-03BLK AF132-03S
-4 AF132-04 AF132-04BLK AF132-04S
-6 AF132-06 AF132-06BLK AF132-06S
-8 AF132-08 AF132-08BLK AF132-08S
-10 AF132-10 AF132-10BLK AF132-10S
-12 AF132-12 AF132-12BLK AF132-12S
-16 AF132-16 AF132-16BLK AF132-16S
-20 AF132-20 AF132-20BLK AF132-20S

STRAIGHT FEMALE COUPLER

AN Blue/Red Black Silver

FITTINGS & ADAPTERS

-3 AF131-03 AF131-03BLK AF131-03S
-4 AF131-04 AF131-04BLK AF131-04S
-6 AF131-06 AF131-06BLK AF131-06S
-8 AF131-08 AF131-08BLK AF131-08S
-10 AF131-10 AF131-10BLK AF131-10S
-12 AF131-12 AF131-12BLK AF131-12S
-16 AF131-16 AF131-16BLK AF131-16S
-20 AF131-20 AF131-20BLK AF131-20S
45° FULL FLOW FEMALE COUPLER
AN Blue/Red Black Silver
-4 AF563-04 AF563-04BLK AF563-04S
-6 AF563-06 AF563-06BLK AF563-06S
-8 AF563-08 AF563-08BLK AF563-08S
-10 AF563-10 AF563-10BLK AF563-10S
-12 AF563-12 AF563-12BLK AF563-12S
-16 AF563-16 AF563-16BLK AF563-16S
-20 AF563-20 AF563-20BLK AF563-20S

STEPPED FEMALE COUPLER

AN Blue/Red Black Silver
-6 to -8 AF131-06-08 AF131-06-08BLK AF131-06-08S
-8 to -10 AF131-08-10 AF131-08-10BLK AF131-08-10S
-10 to -12 AF131-10-12 AF131-10-12BLK AF131-10-12S

90° FEMALE COUPLER

AN Blue/Red Black Silver
AF131-04SS AF131-04-03SS -3 AF133-03 AF133-03BLK AF133-03S
-4 AF133-04 AF133-04BLK AF133-04S
-6 AF133-06 AF133-06BLK AF133-06S
STAINLESS STEEL FEMALE COUPLER -8 AF133-08 AF133-08BLK AF133-08S
-10 AF133-10 AF133-10BLK AF133-10S
AN Stainless Steel -12 AF133-12 AF133-12BLK AF133-12S
-16 AF133-16 AF133-16BLK AF133-16S
-3 AF131-03SS -20 AF133-20 AF133-20BLK AF133-20S
-4 AF131-04SS
-4 to -3 AF131-04-03SS
aeroflowperformance.com 59
 BULKHEADS

90° FULL FLOW FEMALE COUPLER

AN Blue/Red Black Silver
-4 AF583-04 AF583-04BLK AF583-04S
-6 AF583-06 AF583-06BLK AF583-06S
-8 AF583-08 AF583-08BLK AF583-08S
-10 AF583-10 AF583-10BLK AF583-10S
-12 AF583-12 AF583-12BLK AF583-12S
-16 AF583-16 AF583-16BLK AF583-16S
-20 AF583-20 AF583-20BLK AF583-20S
UNIVERSAL THROUGH FRAME BULKHEAD
Designed for running fluid lines through chassis rails. These bulkheads are
to suit 60.2mm (2-3/8”) thick frame rails. Perfect for use on low vehicles.

Part No Finish Description

AF877-06BLK Black female -6ORB ports both ends
AF877-08BLK Black female -8ORB ports both ends

180° FULL FLOW FEMALE COUPLER

FITTINGS & ADAPTERS

AN Blue/Red Black Silver

-6 AF536-06 AF536-06BLK AF536-06S
-8
-10
AF536-08
AF536-10
AF536-08BLK
AF536-10BLK
AF536-08S
AF536-10S
BULKHEAD NUTS
-12 AF536-12 AF536-12BLK AF536-12S
AN Blue Black Silver
-3 AF924-03 AF924-03BLK AF924-03S
-4 AF924-04 AF924-04BLK AF924-04S
-6 AF924-06 AF924-06BLK AF924-06S
-8 AF924-08 AF924-08BLK AF924-08S
-10 AF924-10 AF924-10BLK AF924-10S
-12 AF924-12 AF924-12BLK AF924-12S
-16 AF924-16 AF924-16BLK AF924-16S
-20 AF924-20 AF924-20BLK AF924-20S

UNIVERSAL 2 PORT COMPONENT BULKHEAD

Aeroflow now offer a budget conscious solution for running a 2 port bulkhead.
The 2 port plate can be mounted vertically or horizontally and is available in
polished or black anodised finish and sold without adapter fitting inserts so
you can choose to run any combination of either -6AN, -8AN or -10AN male
nipples.

Finish Description
STRAIGHT BULKHEAD AN
Part No
Bare bulkhead mounting plate ONLY AN Blue Black Silver
AF88-2006 Polished Bare bulkhead mounting plate ONLY
-3 AF832-03 AF832-03BLK AF832-03S
AF88-2006BLK Black Bare bulkhead mounting plate ONLY
-4 AF832-04 AF832-04BLK AF832-04S
-6 AF832-06 AF832-06BLK AF832-06S
AN bulkheads SOLD AS SINGLES
-8 AF832-08 AF832-08BLK AF832-08S
AF88-2007 Polished -6 AN bulkhead fitting with nut
-10 AF832-10 AF832-10BLK AF832-10S
AF88-2007BLK Black -6 AN bulkhead fitting with nut
-12 AF832-12 AF832-12BLK AF832-12S
AF88-2008 Polished -8 AN bulkhead fitting with nut
-16 AF832-16 AF832-16BLK AF832-16S
AF88-2008BLK Black -8 AN bulkhead fitting with nut
-20 AF832-20 AF832-20BLK AF832-20S
AF88-2009 Polished -10 AN bulkhead fitting with nut
AF88-2009BLK Black -10 AN bulkhead fitting with nut
Note: - Bulkhead nuts sold separately

60 aeroflowperformance.com
 BULKHEADS & TEE’S FITTINGS

90° FULL FLOW BULKHEAD AN

45° BULKHEAD AN AN Blue Black Silver
-4 AF533-04 AF533-04BLK AF533-04S
AN Blue Black Silver -6 AF533-06 AF533-06BLK AF533-06S
-3 AF837-03 AF837-03BLK AF837-03S -8 AF533-08 AF533-08BLK AF533-08S
-4 AF837-04 AF837-04BLK AF837-04S -10 AF533-10 AF533-10BLK AF533-10S
-6 AF837-06 AF837-06BLK AF837-06S -12 AF533-12 AF533-12BLK AF533-12S
-8 AF837-08 AF837-08BLK AF837-08S -16 AF533-16 AF533-16BLK AF533-16S
-10 AF837-10 AF837-10BLK AF837-10S -20 AF533-20 AF533-20BLK AF533-20S
-12 AF837-12 AF837-12BLK AF837-12S
-16 AF837-16 AF837-16BLK AF837-16S Note: - Bulkhead nuts sold separately
-20 AF837-20 AF837-20BLK AF837-20S
Note: - Bulkhead nuts sold separately

FITTINGS & ADAPTERS

BULKHEAD AN TEE
AN Blue Black Silver
-3 AF834-03 AF834-03BLK AF834-03S
-4 AF834-04 AF834-04BLK AF834-04S
-6 AF834-06 AF834-06BLK AF834-06S
45° FULL FLOW BULKHEAD AN -8
-10
AF834-08
AF834-10
AF834-08BLK
AF834-10BLK
AF834-08S
AF834-10S
-12 AF834-12 AF834-12BLK AF834-12S
AN Blue Black Silver -16 AF834-16 AF834-16BLK AF834-16S
-4 AF537-04 AF537-04BLK AF537-04S -20 AF834-20 AF834-20BLK AF834-20S
-6 AF537-06 AF537-06BLK AF537-06S
Note: - Bulkhead nuts sold separately
-8 AF537-08 AF537-08BLK AF537-08S
-10 AF537-10 AF537-10BLK AF537-10S
-12 AF537-12 AF537-12BLK AF537-12S
-16 AF537-16 AF537-16BLK AF537-16S
-20 AF537-20 AF537-20BLK AF537-20S
Note: - Bulkhead nuts sold separately

BULKHEAD AN TEE ON THE RUN

90° BULKHEAD AN AN Blue Black Silver
-3 AF804-03 AF804-03BLK AF804-03S
AN Blue Black Silver -4 AF804-04 AF804-04BLK AF804-04S
-6 AF804-06 AF804-06BLK AF804-06S
-3 AF833-03 AF833-03BLK AF833-03S
-8 AF804-08 AF804-08BLK AF804-08S
-4 AF833-04 AF833-04BLK AF833-04S
-10 AF804-10 AF804-10BLK AF804-10S
-6 AF833-06 AF833-06BLK AF833-06S
-12 AF804-12 AF804-12BLK AF804-12S
-8 AF833-08 AF833-08BLK AF833-08S
-16 AF804-16 AF804-16BLK AF804-16S
-10 AF833-10 AF833-10BLK AF833-10S
-20 AF804-20 AF804-20BLK AF804-20S
-12 AF833-12 AF833-12BLK AF833-12S
-16 AF833-16 AF833-16BLK AF833-16S Note: - Bulkhead nuts sold separately

Note: - Bulkhead nuts sold separately

aeroflowperformance.com 61
 TEE FITTINGS

AN TEE FEMALE NUT ON RUN FLARE AN TEE WITH 1/8” NPT PORT

AN Blue Black Silver AN Blue Black Silver

-6 AF824-06P AF824-06PBLK AF824-06PS
-3 AF145-03 AF145-03BLK AF145-03S
-8 AF824-08P AF824-08PBLK AF824-08PS
-4 AF145-04 AF145-04BLK AF145-04S
-6 AF145-06 AF145-06BLK AF145-06S
-8 AF145-08 AF145-08BLK AF145-08S
-10 AF145-10 AF145-10BLK AF145-10S
-12 AF145-12 AF145-12BLK AF145-12S
-16 AF145-16 AF145-16BLK AF145-16S
FITTINGS & ADAPTERS

FEMALE ORB TEE

AN TEE FEMALE ON SIDE
AN Blue Black Silver
AN Blue Black Silver -3 AF938-03 AF938-03BLK AF938-03S
-4 AF938-04 AF938-04BLK AF938-04S
-3 AF144-03 AF144-03BLK AF144-03S -6 AF938-06 AF938-06BLK AF938-06S
-4 AF144-04 AF144-04BLK AF144-04S -8 AF938-08 AF938-08BLK AF938-08S
-6 AF144-06 AF144-06BLK AF144-06S -10 AF938-10 AF938-10BLK AF938-10S
-8 AF144-08 AF144-08BLK AF144-08S -12 AF938-12 AF938-12BLK AF938-12S
-10 AF144-10 AF144-10BLK AF144-10S -16 AF938-16 AF938-16BLK AF938-16S
-12 AF144-12 AF144-12BLK AF144-12S -20 AF938-20 AF938-20BLK AF938-20S
-16 AF144-16 AF144-16BLK AF144-16S

FLARE AN TEE
AN Blue Black Silver
-3 AF824-03 AF824-03BLK AF824-03S
-4 AF824-04 AF824-04BLK AF824-04S BILLET Y-BLOCK WITH 1/8 NPT PORT
-6 AF824-06 AF824-06BLK AF824-06S
-8 AF824-08 AF824-08BLK AF824-08S
-10 AF824-10 AF824-10BLK AF824-10S
ORB Blue Black Silver
-12 AF824-12 AF824-12BLK AF824-12S 3 x -8 AF453-08 AF453-08BLK AF453-08S
-16 AF824-16 AF824-16BLK AF824-16S 1 x -10, 2 x -8 AF453-10-08 AF453-10-08BLK AF453-10-08S

62 aeroflowperformance.com
 Y BLOCKS

BILLET Y-BLOCK WITH 1/8 NPT PORT

NPT In / Out Blue Black Silver
3/8” to 3/8” AF451-08 AF451-08BLK AF451-08S
U-BLOCKS WITH FEMALE FLARE
1/2” to 1/2” AF451-10 AF451-10BLK AF451-10S
1/2” to 3/8” AF451-10-08 AF451-10-08BLK AF451-10-08S AN Blue Black Silver
3/4” to 3/4” AF451-12 AF451-12BLK AF451-12S 1 x -8, 2 x -6 AF146-08-06 AF146-08-06BLK AF146-08-06S
1 x -10, 2 x -6 AF146-10-08 AF146-10-08BLK AF146-10-08S

BILLET 4 PORT ORB Y-BLOCK

Y Block has 3 x -8 ports and 1 x -10 port.

Y-BLOCKS

FITTINGS & ADAPTERS

ORB Blue Black Silver
3 x-8, 1 x -10 AF454-10-08 AF454-10-08BLK AF454-10-08S AN Blue Black Silver
3 x -3 AF930-03-03 AF930-03-03BLK AF930-03-03S
1 x -4, 2 x -3 AF930-04-03 AF930-04-03BLK AF930-04-03S
3 x -4 AF930-04-04 AF930-04-04BLK AF930-04-04S
1 x -6, 2 x -4 AF930-06-04 AF930-06-04BLK AF930-06-04S
3 x -6 AF930-06-06 AF930-06-06BLK AF930-06-06S
1 x -8, 2 x -6 AF930-08-06 AF930-08-06BLK AF930-08-06S
3 x -8 AF930-08-08 AF930-08-08BLK AF930-08-08S
1 x -10, 2 x -8 AF930-10-08 AF930-10-08BLK AF930-10-08S
3 x -10 AF930-10-10 AF930-10-10BLK AF930-10-10S
1 x -12, 2 x -10 AF930-12-10 AF930-12-10BLK AF930-12-10S
3 x -12 AF930-12-12 AF930-12-12BLK AF930-12-12S
3 x -16 AF930-16-16 AF930-16-16BLK AF930-16-16S

BILLET 3 PORT ORB BLOCK

Y Block has 2 x -8 ports and 1 x -10 port.

ORB Blue Black Silver

2 x-8, 1 x -10 AF455-10-08 AF455-10-08BLK AF455-10-08S

Y-BLOCKS WITH FEMALE FLARE

76mm (3”) centre to centre of the -8 AN female nuts.

AN Blue Black Silver Polished

2 x -8, 1 x -10 AF939-08-10 AF939-08-10BLK AF939-08-10S AF939-08-10P

Y-BLOCKS WITH FEMALE FLARE

AN Blue Black Silver
1 x -8, 2 x -6 AF931-08-06 AF931-08-06BLK AF931-08-06S
1 x -10, 2 x -8 AF931-10-08 AF931-10-08BLK AF931-10-08S
1 x -12, 2 x -10 AF931-12-10 AF931-12-10BLK AF931-12-10S
aeroflowperformance.com 63
 ADAPTERS

STEPPED MALE FLARE UNIONS

AN to AN Blue Black Silver
-4 to -3 AF815-04-03 AF815-04-03BLK AF815-04-03S 45° MALE FLARE UNION AN
-6 to -3 AF815-06-03 AF815-06-03BLK AF815-06-03S
-6 to -4 AF815-06-04 AF815-06-04BLK AF815-06-04S AN Blue Black Silver
-8 to -4 AF815-08-04 AF815-08-04BLK AF815-08-04S
-8 to -6 AF815-08-06 AF815-08-06BLK AF815-08-06S -3 AF827-03 AF827-03BLK AF827-03S
-10 to -4 AF815-10-04 AF815-10-04BLK AF815-10-04S -4 AF827-04 AF827-04BLK AF827-04S
-10 to -6 AF815-10-06 AF815-10-06BLK AF815-10-06S -6 AF827-06 AF827-06BLK AF827-06S
-10 to -8 AF815-10-08 AF815-10-08BLK AF815-10-08S -8 AF827-08 AF827-08BLK AF827-08S
-12 to -4 AF815-12-04 AF815-12-04BLK AF815-12-04S -10 AF827-10 AF827-10BLK AF827-10S
-12 to -6 AF815-12-06 AF815-12-06BLK AF815-12-06S -12 AF827-12 AF827-12BLK AF827-12S
-12 to -8 AF815-12-08 AF815-12-08BLK AF815-12-08S -16 AF827-16 AF827-16BLK AF827-16S
-12 to -10 AF815-12-10 AF815-12-10BLK AF815-12-10S
-16 to -10 AF815-16-10 AF815-16-10BLK AF815-16-10S
-16 to -12 AF815-16-12 AF815-16-12BLK AF815-16-12S
-20 to -12 AF815-20-12 AF815-20-12BLK AF815-20-12S
-20 to -16 AF815-20-16 AF815-20-16BLK AF815-20-16S
FITTINGS & ADAPTERS

45° FULL FLOW AN UNION

AN Blue Black Silver
MALE FLARE UNION
-3 AF527-03 AF527-03BLK AF527-03S
AN Blue Black Silver -4 AF527-04 AF527-04BLK AF527-04S
-6 AF527-06 AF527-06BLK AF527-06S
-3 AF815-03 AF815-03BLK AF815-03S -8 AF527-08 AF527-08BLK AF527-08S
-4 AF815-04 AF815-04BLK AF815-04S -10 AF527-10 AF527-10BLK AF527-10S
-6 AF815-06 AF815-06BLK AF815-06S -12 AF527-12 AF527-12BLK AF527-12S
-8 AF815-08 AF815-08BLK AF815-08S -16 AF527-16 AF527-16BLK AF527-16S
-10 AF815-10 AF815-10BLK AF815-10S -20 AF527-20 AF527-20BLK AF527-20S
-12 AF815-12 AF815-12BLK AF815-12S
-16 AF815-16 AF815-16BLK AF815-16S
-20 AF815-20 AF815-20BLK AF815-20S

STRAIGHT MALE to MALE WITH 1/8” NPT PORT

AN Blue Black Silver
-3
-4
AF141-03
AF141-04
AF141-03BLK
AF141-04BLK
AF141-03S
AF141-04S
45° MALE FLARE UNION WITH 1/8” NPT PORT
-6 AF141-06 AF141-06BLK AF141-06S
-8 AF141-08 AF141-08BLK AF141-08S AN Blue Black Silver
-10 AF141-10 AF141-10BLK AF141-10S -6 AF827-06P AF827-06PBLK AF827-06PS
-12 AF141-12 AF141-12BLK AF141-12S -8 AF827-08P AF827-08PBLK AF827-08PS
-16 AF141-16 AF141-16BLK AF141-16S

64 aeroflowperformance.com
 ADAPTERS

STRAIGHT FEMALE to MALE WITH 1/8” NPT PORT

90° MALE FLARE UNION AN
AN Blue Black Silver
AN Blue Black Silver -3 AF140-03 AF140-03BLK AF140-03S
-3 AF821-03 AF821-03BLK AF821-03S -4 AF140-04 AF140-04BLK AF140-04S
-4 AF821-04 AF821-04BLK AF821-04S -6 AF140-06 AF140-06BLK AF140-06S
-6 AF821-06 AF821-06BLK AF821-06S -8 AF140-08 AF140-08BLK AF140-08S
-8 AF821-08 AF821-08BLK AF821-08S -10 AF140-10 AF140-10BLK AF140-10S
-10 AF821-10 AF821-10BLK AF821-10S -12 AF140-12 AF140-12BLK AF140-12S
-12 AF821-12 AF821-12BLK AF821-12S -16 AF140-16 AF140-16BLK AF140-16S
-16 AF821-16 AF821-16BLK AF821-16S

FITTINGS & ADAPTERS

45° FEMALE / MALE FLARE
90° MALE FLARE UNION WITH 1/8” NPT PORT AN Blue Black Silver
-3 AF142-03 AF142-03BLK AF142-03S
AN Blue Black Silver -4 AF142-04 AF142-04BLK AF142-04S
-6 AF142-06 AF142-06BLK AF142-06S
-6 AF821-06P AF821-06PBLK AF821-06PS -8 AF142-08 AF142-08BLK AF142-08S
-8 AF821-08P AF821-08PBLK AF821-08PS -10 AF142-10 AF142-10BLK AF142-10S
-12 AF142-12 AF142-12BLK AF142-12S
-16 AF142-16 AF142-16BLK AF142-16S

FULL FLOW 45°

90° FULL FLOW AN UNION FEMALE / MALE FLARE
AN Blue Black Silver AN Blue Black Silver
-3 AF521-03 AF521-03BLK AF521-03S -3 AF542-03 AF542-03BLK AF542-03S
-4 AF521-04 AF521-04BLK AF521-04S -4 AF542-04 AF542-04BLK AF542-04S
-6 AF521-06 AF521-06BLK AF521-06S -6 AF542-06 AF542-06BLK AF542-06S
-8 AF521-08 AF521-08BLK AF521-08S -8 AF542-08 AF542-08BLK AF542-08S
-10 AF521-10 AF521-10BLK AF521-10S -10 AF542-10 AF542-10BLK AF542-10S
-12 AF521-12 AF521-12BLK AF521-12S -12 AF542-12 AF542-12BLK AF542-12S
-16 AF521-16 AF521-16BLK AF521-16S -16 AF542-16 AF542-16BLK AF542-16S
-20 AF521-20 AF521-20BLK AF521-20S -20 AF542-20 AF542-20BLK AF542-20S

aeroflowperformance.com 65
 ADAPTERS

90° FEMALE / MALE FLARE AN FLARE EXPANDERS FEMALE / MALE

AN Blue Black Silver
AN to AN Blue Black Silver
-3 AF143-03 AF143-03BLK AF143-03S
-4 AF143-04 AF143-04BLK AF143-04S -3 to -4 AF951-03-04 AF951-03-04BLK AF951-03-04S
-6 AF143-06 AF143-06BLK AF143-06S -3 to -6 AF951-03-06 AF951-03-06BLK AF951-03-06S
-8 AF143-08 AF143-08BLK AF143-08S -4 to -6 AF951-04-06 AF951-04-06BLK AF951-04-06S
-10 AF143-10 AF143-10BLK AF143-10S -4 to -8 AF951-04-08 AF951-04-08BLK AF951-04-08S
-12 AF143-12 AF143-12BLK AF143-12S -6 to -8 AF951-06-08 AF951-06-08BLK AF951-06-08S
-16 AF143-16 AF143-16BLK AF143-16S -6 to -10 AF951-06-10 AF951-06-10BLK AF951-06-10S
-8 to -10 AF951-08-10 AF951-08-10BLK AF951-08-10S
-8 to -12 AF951-08-12 AF951-08-12BLK AF951-08-12S
-10 to -12 AF951-10-12 AF951-10-12BLK AF951-10-12S
-10 to -16 AF951-10-16 AF951-10-16BLK AF951-10-16S
-12 to -16 AF951-12-16 AF951-12-16BLK AF951-12-16S
-16 to -20 AF951-16-20 AF951-16-20BLK AF951-16-20S
FITTINGS & ADAPTERS

FULL FLOW 90°

FEMALE / MALE FLARE
AN Blue Black Silver
-3 AF543-03 AF543-03BLK AF543-03S
-4 AF543-04 AF543-04BLK AF543-04S
-6 AF543-06 AF543-06BLK AF543-06S
-8 AF543-08 AF543-08BLK AF543-08S
-10 AF543-10 AF543-10BLK AF543-10S
-12 AF543-12 AF543-12BLK AF543-12S
-16
-20
AF543-16
AF543-20
AF543-16BLK
AF543-20BLK
AF543-16S
AF543-20S
90° FEMALE to MALE 1/8” NPT
NPT Blue Black Silver
1/8” AF896-02 AF896-02BLK AF896-02S

AN FLARE REDUCERS FEMALE / MALE

AN to AN Blue Black Silver
-4 to -3 AF950-04-03 AF950-04-03BLK AF950-04-03S
OVER TIGHTENING
o
A common problem with 37 flares on aluminium fittings and
-6 to -3 AF950-06-03 AF950-06-03BLK AF950-06-03S
adapters is they can easily be damaged by over-tightening (see
-6 to -4 AF950-06-04 AF950-06-04BLK AF950-06-04S
torque specifications information on Page 429. If a fitting has
-8 to -4 AF950-08-04 AF950-08-04BLK AF950-08-04S been over-tightened, it may be damaged and prone to leaks. Dirt
-8 to -6 AF950-08-06 AF950-08-06BLK AF950-08-06S and debris on the 37o sealing surfaces are also a common cause
-10 to -4 AF950-10-04 AF950-10-04BLK AF950-10-04S of leaks. To avoid this always use Aeroflow’s dust cap & plug kits
-10 to -6 AF950-10-06 AF950-10-06BLK AF950-10-06S page 416 when disconnecting hoses to help keep dust, dirt and
-10 to -8 AF950-10-08 AF950-10-08BLK AF950-10-08S other contaminants out of your hose ends and adapters. Check
-12 to -8 AF950-12-08 AF950-12-08BLK AF950-12-08S sealing surfaces are clean and free of damage before re-fitting.
-12 to -10 AF950-12-10 AF950-12-10BLK AF950-12-10S
-16 to -12 AF950-16-12 AF950-16-12BLK AF950-16-12S
-20 to -16 AF950-20-16 AF950-20-16BLK AF950-20-16S

66 aeroflowperformance.com
 PLUGS

ORB PORT REDUCER

AN HEX FLARE PLUGS
Male to Female Blue Black Silver
AN Blue Black Silver
-6ORB to 1/8” NPT AF912-P06-02 AF912-P06-02BLK AF912-P06-02S
-3 AF806-03 AF806-03BLK AF806-03S -8ORB to 1/8” NPT AF912-P08-02 AF912-P08-02BLK AF912-P08-02S
-4 AF806-04 AF806-04BLK AF806-04S -10ORB to 1/8” NPT AF912-P10-02 AF912-P10-02BLK AF912-P10-02S
-6 AF806-06 AF806-06BLK AF806-06S -12ORB to 1/8” NPT AF912-P12-02 AF912-P12-02BLK AF912-P12-02S
-8 AF806-08 AF806-08BLK AF806-08S
-10 AF806-10 AF806-10BLK AF806-10S
-12 AF806-12 AF806-12BLK AF806-12S
-16 AF806-16 AF806-16BLK AF806-16S
-20 AF806-20 AF806-20BLK AF806-20S

FITTINGS & ADAPTERS

METRIC PORT REDUCER
Male to Female Blue Black Silver
METRIC PORT PLUGS M12 x 1.5 to 1/8” NPT AF912-M12-02 AF912-M12-02BLK AF912-M12-02S
M14 x 1.5 to 1/8” NPT AF912-M14-02 AF912-M14-02BLK AF912-M14-02S
Size Blue Black Silver M16 x 1.5 to 1/8” NPT AF912-M16-02 AF912-M16-02BLK AF912-M16-02S
M10 x 1.0 AF814-M10-01 AF814-M10-01BLK AF814-M10-01S M18 x 1.5 to 1/8” NPT AF912-M18-02 AF912-M18-02BLK AF912-M18-02S
M10 x 1.25 AF814-M10-02 AF814-M10-02BLK AF814-M10-02S
M12 x 1.25 AF814-M12-01 AF814-M12-01BLK AF814-M12-01S
M12 x 1.5 AF814-M12 AF814-M12BLK AF814-M12S
M14 x 1.5 AF814-M14 AF814-M14BLK AF814-M14S
M16 x 1.5 AF814-M16 AF814-M16BLK AF814-M16S
M18 x 1.5 AF814-M18 AF814-M18BLK AF814-M18S

NPT HEX HEAD PLUGS

ORB HEX PORT PLUGS
NPT Blue Black Silver
AN Blue Black Silver 1/8” AF933-02 AF933-02BLK AF933-02S
-3 AF814-03 AF814-03BLK AF814-03S 1/4” AF933-04 AF933-04BLK AF933-04S
-4 AF814-04 AF814-04BLK AF814-04S 3/8” AF933-06 AF933-06BLK AF933-06S
-6 AF814-06 AF814-06BLK AF814-06S 1/2” AF933-08 AF933-08BLK AF933-08S
-8 AF814-08 AF814-08BLK AF814-08S 3/4” AF933-12 AF933-12BLK AF933-12S
-10 AF814-10 AF814-10BLK AF814-10S 1” AF933-16 AF933-16BLK AF933-16S
-12 AF814-12 AF814-12BLK AF814-12S
-16 AF814-16 AF814-16BLK AF814-16S

aeroflowperformance.com 67
 PLUGS & ADAPTERS

FLARE CAPS
ORB PORT PLUGS Slimline AN Blue Black Silver
-3 AF820-03 AF820-03BLK AF820-03S
AN Blue Black Silver -4 AF820-04 AF820-04BLK AF820-04S
-6 AF820-06 AF820-06BLK AF820-06S
-3 AF813-03 AF813-03BLK AF813-03S -8 AF820-08 AF820-08BLK AF820-08S
-4 AF813-04 AF813-04BLK AF813-04S -10 AF820-10 AF820-10BLK AF820-10S
-6 AF813-06 AF813-06BLK AF813-06S -12 AF820-12 AF820-12BLK AF820-12S
-8 AF813-08 AF813-08BLK AF813-08S -16 AF820-16 AF820-16BLK AF820-16S
-10 AF813-10 AF813-10BLK AF813-10S -20 AF820-20 AF820-20BLK AF820-20S
-12 AF813-12 AF813-12BLK AF813-12S
-16 AF813-16 AF813-16BLK AF813-16S
-20 AF813-20 AF813-20BLK AF813-20S

ORB TO FEMALE AN ADAPTER

FITTINGS & ADAPTERS

These handy adapters are great for all of our tanks, fuel rails and regulators
no more messing around with tapered threads!

NPT PLUGS Blue

Size Black Silver
NPT Blue Black Silver -6 ORB to -6 AF907-06 AF907-06BLK AF907-06S
-6 ORB to -8 AF907-08-06 AF907-08-06BLK AF907-08-06S
1/16” AF932-01 AF932-01BLK AF932-01S
-8 ORB to -6 AF907-06-08 AF907-06-08BLK AF907-06-08S
1/8” AF932-02 AF932-02BLK AF932-02S
-8 ORB to -8 AF907-08 AF907-08BLK AF907-08S
1/4” AF932-04 AF932-04BLK AF932-04S
-8 ORB to -10 AF907-10-08 AF907-10-08BLK AF907-10-08S
3/8” AF932-06 AF932-06BLK AF932-06S
-10 ORB to -6 AF907-06-10 AF907-06-10BLK AF907-06-10S
1/2” AF932-08 AF932-08BLK AF932-08S
-10 ORB to -8 AF907-08-10 AF907-08-10BLK AF907-08-10S
3/4” AF932-12 AF932-12BLK AF932-12S
-10 ORB to -10 AF907-10 AF907-10BLK AF907-10S
1” AF932-16 AF932-16BLK AF932-16S
-10 ORB to -12 AF907-12-10 AF907-12-10BLK AF907-12-10S
These part numbers are available in packs of 25 fittings. -12 ORB to -8 AF907-8-12 AF907-8-12BLK AF907-8-12S
Add -25 to end of part number eg. AF932-06BLK-25 -12 ORB to -10 AF907-10-12 AF907-10-12BLK AF907-10-12S
-12 ORB to -12 AF907-12 AF907-12BLK AF907-12S

STEEL NPT PLUGS ORB MALE COUPLERS

ORB Blue Black Silver
NPT Black Zinc
1/8” AF979-02BLK AF979-02 -6 to -6 AF929-06 AF929-06BLK AF929-06S
1/4” AF979-04BLK AF979-04 -8 to -6 AF929-08-06 AF929-08-06BLK AF929-08-06S
3/8” AF979-06BLK AF979-06 -8 to -8 AF929-08 AF929-08BLK AF929-08S
1/2” AF979-08BLK AF979-08 -10 to -8 AF929-10-08 AF929-10-08BLK AF929-10-08S
-10 to -10 AF929-10 AF929-10BLK AF929-10S
-12 to -8 AF929-12-08 AF929-12-08BLK AF929-12-08S
-12 to -10 AF929-12-10 AF929-12-10BLK AF929-12-10S
-12 to -12 AF929-12 AF929-12BLK AF929-12S

68 aeroflowperformance.com
 EXTENSIONS

ORB TO MALE AN EXTENSION

AN Length Blue Black Silver
-6 41.3mm 1-5/8” AF953-06 AF953-06BLK AF953-06S
-8 47.6mm 1-7/8” AF953-08 AF953-08BLK AF953-08S
-10 54mm 2-1/8” AF953-10 AF953-10BLK AF953-10S
-12 64mm 2-1/2” AF953-12 AF953-12BLK AF953-12S

ORB MALE to MALE NPT SWIVEL Note: -8 extension can be used as male carby inlets for Holley Ultra HP

ORB to NPT Blue Black Silver

-10 to 3/8” NPT AF929-10-06 AF929-10-06BLK AF929-10-06S

AN FEMALE to MALE EXTENSIONS

-4 to -6 is 1”(25mm) length. -8 to -16 is 1.5”(38mm) length.

FITTINGS & ADAPTERS

AN to AN Blue Black Silver
-4 to -4 AF952-04 AF952-04BLK AF952-04S
-6 to -6 AF952-06 AF952-06BLK AF952-06S
-8 to -8 AF952-08 AF952-08BLK AF952-08S
-10 to -10 AF952-10 AF952-10BLK AF952-10S
-12 to -12 AF952-12 AF952-12BLK AF952-12S
ORB MALE to MALE NPT COUPLER -16 to -16 AF952-16 AF952-16BLK AF952-16S

ORB to NPT Blue Black Silver

-10 to 3/8” NPT AF928-10-06 AF928-10-06BLK AF928-10-06S

ALLOY METRIC EXTENSION

with 1/8” NPT PORT
Aluminium with anodised coating

Thread Blue Black Silver

M12 x 1.5 AF810-M12-02 AF810-M12-02BLK AF810-M12-02S
M14 x 1.5 AF810-M14-02 AF810-M14-02BLK AF810-M14-02S
M16 x 1.5 AF810-M16-02 AF810-M16-02BLK AF810-M16-02S

ORB TO MALE AN EXTENSION

with 1/8” NPT Port
AN Length Blue Black Silver STEEL METRIC EXTENSION
-6
-8
38mm 1-1/2”
42mm 1-5/8”
AF904-06
AF904-08
AF904-06BLK
AF904-08BLK
AF904-06S
AF904-08S
with 1/8” NPT PORT
-10 44mm 1-3/4” AF904-10 AF904-10BLK AF904-10S Steel with black teflon coating

Thread Part No
M12 x 1.5 AF810-M12-02-ST
M14 x 1.5 AF810-M14-02-ST
M16 x 1.5 AF810-M16-02-ST

aeroflowperformance.com 69
 ORB ADAPTERS & O-RINGS

STAT-O-SEAL (10 PACK)

Stat-o-seals are manufactured with BUNA N rubber which is
compatable with unleaded, alcohol and ethanol fuels.
Washer thickness 1.5mm (1/16”)

Part No Suit I.D. Sizes O.D. Sizes

AF179-03 -3AN 9.53mm 3/8” 16.75mm 21/32”
AF179-04 -4AN 11.11mm 7/16” 19.20mm 49/64”
AF179-06
AF179-07
-6AN
5/8”
14.29mm
15.8mm
9/16”
5/8”
27mm
30.3mm
1-1/16”
1-1/4”
ORB to STRAIGHT AN MALE FLARE ADAPTERS
AF179-08 -8AN 19.05mm 3/4” 28.4mm 1-1/8”
AF179-10 -10AN 22.23mm 7/8” 38.25mm 1-33/64” ORB to AN Blue Black Silver
-3 to -3 AF920-03 AF920-03BLK AF920-03S
-3 to -4 AF920-04-03 AF920-04-03BLK AF920-04-03S
-3 to -6 AF920-06-03 AF920-06-03BLK AF920-06-03S
-4 to -3 AF920-03-04 AF920-03-04BLK AF920-03-04S
-4 to -4 AF920-04 AF920-04BLK AF920-04S
VITON RUBBER O-RINGS (10 PACK) -4 to -6
-4 to -8
AF920-06-04
AF920-08-04
AF920-06-04BLK
AF920-08-04BLK
AF920-06-04S
AF920-08-04S
For use with unleaded fuels & oils -6 to -3 AF920-03-06 AF920-03-06BLK AF920-03-06S
-6 to -4 AF920-04-06 AF920-04-06BLK AF920-04-06S
Suit I.D. Sizes O.D. Sizes -6 to -6 AF920-06 AF920-06BLK AF920-06S
Part No
-6 to -8 AF920-08-06 AF920-08-06BLK AF920-08-06S
-6 to -10 AF920-10-06 AF920-10-06BLK AF920-10-06S
AF178-03 -3AN 7.50mm 19/64” 10.7mm 27/64”
-8 to -3 AF920-03-08 AF920-03-08BLK AF920-03-08S
AF178-04 -4AN 9mm 23/64” 12.5mm 31/64”
-8 to -4 AF920-04-08 AF920-04-08BLK AF920-04-08S
AF178-05 -5AN 10.3mm 13/32” 13.9mm 35/64”
-8 to -6 AF920-06-08 AF920-06-08BLK AF920-06-08S
AF178-06 -6AN 12.1mm 15/32” 15.87mm 5/8”
-8 to -8 AF920-08 AF920-08BLK AF920-08S
AF178-08 -8AN 17.3mm 11/16” 20.70mm 13/16”
-8 to-10 AF920-10-08 AF920-10-08BLK AF920-10-08S
AF178-10 -10AN 19.30mm 49/64” 24.1mm 61/64”
-8 to -12 AF920-12-08 AF920-12-08BLK AF920-12-08S
AF178-12 -12AN 24mm 61/64” 29.5mm 1-5/32”
-10 to -3 AF920-03-10 AF920-03-10BLK AF920-03-10S
FITTINGS & ADAPTERS

AF178-16 -16AN 29mm 1-5/32” 35.5mm 1-25/64”

-10 to -4 AF920-04-10 AF920-04-10BLK AF920-04-10S
AF178-KIT -3AN to -20AN
-10 to -6 AF920-06-10 AF920-06-10BLK AF920-06-10S
KIT CONTAINS 10 OF EACH SIZE
-10 to -8 AF920-08-10 AF920-08-10BLK AF920-08-10S
-10 to -10 AF920-10 AF920-10BLK AF920-10S
-10 to -12 AF920-12-10 AF920-12-10BLK AF920-12-10S
-10 to -16 AF920-16-10 AF920-16-10BLK AF920-16-10S
-12 to -3 AF920-03-12 AF920-03-12BLK AF920-03-12S
-12 to -4 AF920-04-12 AF920-04-12BLK AF920-04-12S
-12 to -6 AF920-06-12 AF920-06-12BLK AF920-06-12S
EPR RUBBER O-RINGS (10 PACK) -12 to -8 AF920-08-12 AF920-08-12BLK AF920-08-12S
EPR - Ethylene Propylene Rubber compatable with alcohol, ethanol -12 to -10 AF920-10-12 AF920-10-12BLK AF920-10-12S
and nitromethane fuels. -12 to -12 AF920-12 AF920-12BLK AF920-12S
-12 to -16 AF920-16-12 AF920-16-12BLK AF920-16-12S
Part No Suit I.D. Sizes O.D. Sizes -16 to -10 AF920-10-16 AF920-10-16BLK AF920-10-16S
-16 to -12 AF920-12-16 AF920-12-16BLK AF920-12-16S
AF175-03 -3AN 7.50mm 19/64” 10.7mm 27/64” -16 to -16 AF920-16 AF920-16BLK AF920-16S
AF175-04 -4AN 9mm 23/64” 12.5mm 31/64” -16 to -20 AF920-20-16 AF920-20-16BLK AF920-20-16S
AF175-05 -5AN 10.3mm 13/32” 13.9mm 35/64” -20 to -12 AF920-12-20 AF920-12-20BLK AF920-12-20S
AF175-06 -6AN 12.1mm 15/32” 15.87mm 5/8” -20 to -16 AF920-16-20 AF920-16-20BLK AF920-16-20S
AF175-08 -8AN 17.3mm 11/16” 20.70mm 13/16” -20 to -20 AF920-20 AF920-20BLK AF920-20S
AF175-10 -10AN 19.30mm 49/64” 24.1mm 61/64” -20 to -24 AF920-24-20 AF920-24-20BLK AF920-24-20S
AF175-12 -12AN 24mm 61/64” 29.5mm 1-5/32” These part numbers are available in packs of 25 fittings.
AF175-16 -16AN 29mm 1-5/32” 35.5mm 1-25/64” Add -25 to end of part number eg. AF920-06BLK-25
AF175-20 -20AN 38.6mm 2-17/32” 43.05mm 2-45/64”
AF175-KIT -3AN to -20AN
KIT CONTAINS 10 OF EACH SIZE

BUNA N RUBBER O-RINGS (10 PACK)

For use with unleaded, alcohol and ethanol fuels

Part No Suit I.D. Sizes O.D. Sizes METRIC to FEMALE AN ADAPTERS

AF174-03 -3AN 7.50mm 19/64” 10.7mm 27/64” Aeroflow’s range of metric crush washer seal adapters are ever increasing in
AF174-04 -4AN 9mm 23/64” 12.5mm 31/64” options and are now available in M12, M14 and M18 x 1.5 to female swivel
AF174-05 -5AN 10.3mm 13/32” 13.9mm 35/64” nut allowing quick removal and replacement of plumbing without disturbing the
AF174-06 -6AN 12.1mm 15/32” 15.87mm 5/8” crush washer seal area.
AF174-08 -8AN 17.3mm 11/16” 20.70mm 13/16”
AF174-10 -10AN 19.30mm 49/64” 24.1mm 61/64” Metric to AN Blue Black Silver
AF174-12 -12AN 24mm 61/64” 29.5mm 1-5/32”
AF174-16 -16AN 29mm 1-5/32” 35.5mm 1-25/64” M12 x 1.5mm to -8 AF906-08-M12 AF906-08-M12BLK AF906-08-M12S
AF174-20 -20AN 38.6mm 2-17/32” 43.05mm 2-45/64” M14 x 1.5mm to -8 AF906-08-M14 AF906-08-M14BLK AF906-08-M14S
AF174-KIT -3AN to -20AN M18 x 1.5mm to -8 AF906-08-M18 AF906-08-M18BLK AF906-08-M18S
KIT CONTAINS 10 OF EACH SIZE M18 x 1.5mm to -10 AF906-10-M18 AF906-10-M18BLK AF906-10-M18S
70 aeroflowperformance.com
 ORB ADAPTERS

45° ORB SWIVEL to MALE FLARE ADAPTERS 90° ORB to MALE AN FULL FLOW ADAPTERS
ORB to AN Blue Black Silver ORB to AN Blue Black Silver
-6 to -6 AF945-06 AF945-06BLK AF945-06S -3 to -3 AF903-03 AF903-03BLK AF903-03S
-8 to -6 AF945-06-08 AF945-06-08BLK AF945-06-08S -4 to -4 AF903-04 AF903-04BLK AF903-04S
-8 to -8 AF945-08 AF945-08BLK AF945-08S -4 to -6 AF903-06-04 AF903-06-04BLK AF903-06-04S
-8 to -10 AF945-10-08 AF945-10-08BLK AF945-10-08S -6 to -4 AF903-04-06 AF903-04-06BLK AF903-04-06S
-10 to -8 AF945-08-10 AF945-08-10BLK AF945-08-10S -6 to -6 AF903-06 AF903-06BLK AF903-06S
-10 to -10 AF945-10 AF945-10BLK AF945-10S -6 to -8 AF903-08-06 AF903-08-06BLK AF903-08-06S
-12 to -12 AF945-12 AF945-12BLK AF945-12S -8 to -6 AF903-06-08 AF903-06-08BLK AF903-06-08S
-16 to -16 AF945-16 AF945-16BLK AF945-16S -8 to -8 AF903-08 AF903-08BLK AF903-08S
-8 to -10 AF903-10-08 AF903-10-08BLK AF903-10-08S
-10 to -8 AF903-08-10 AF903-08-10BLK AF903-08-10S
-10 to -10 AF903-10 AF903-10BLK AF903-10S
-10 to -12 AF903-12-10 AF903-12-10BLK AF903-12-10S
-12 to -10 AF903-10-12 AF903-10-12BLK AF903-10-12S
-12 to -12 AF903-12 AF903-12BLK AF903-12S
-16 to -12 AF903-12-16 AF903-12-16BLK AF903-12-16S
-16 to -16 AF903-16 AF903-16BLK AF903-16S
-20 to -16 AF903-16-20 AF903-16-20BLK AF903-16-20S
-20 to -20 AF903-20 AF903-20BLK AF903-20S

90° ORB SWIVEL to MALE FLARE ADAPTERS

FITTINGS & ADAPTERS

ORB to AN Blue Black Silver
-6 to -6 AF949-06 AF949-06BLK AF949-06S
-8 to -6 AF949-06-08 AF949-06-08BLK AF949-06-08S
-8 to -8 AF949-08 AF949-08BLK AF949-08S
-8 to -10 AF949-10-08 AF949-10-08BLK AF949-10-08S
-10 to -8 AF949-08-10 AF949-08-10BLK AF949-09-10S
-10 to -10 AF949-10 AF949-10BLK AF949-10S
-12 to -12 AF949-12 AF949-12BLK AF949-12S
-16 to -16 AF949-16 AF949-16BLK AF949-16S

90° LOW PROFILE ORB to MALE AN ADAPTERS

Silver
ORB to AN Blue Black Silver
45° ORB to MALE AN FULL FLOW ADAPTERS -6 to -6 AF909-06 AF909-06BLK AF909-06S
Silver -8 to -6 AF909-06-08 AF909-06-08BLK AF909-06-08S
-8 to -8 AF909-08 AF909-08BLK AF909-08S
ORB to AN Blue Black Silver -10 to -6 AF909-06-10 AF909-06-10BLK AF909-06-10S
-10 to -8 AF909-08-10 AF909-08-10BLK AF909-08-10S
-3 to -3 AF902-03 AF902-03BLK AF902-03S
-10 to -10 AF909-10 AF909-10BLK AF909-10S
-4 to -4 AF902-04 AF902-04BLK AF902-04S
-12 to -12 AF909-12 AF909-12BLK AF909-12S
-4 to -6 AF902-06-04 AF902-06-04BLK AF902-06-04S
-6 to -4 AF902-04-06 AF902-04-06BLK AF902-04-06S
-6 to -6 AF902-06 AF902-06BLK AF902-06S
-6 to -8 AF902-08-06 AF902-08-06BLK AF902-08-06S
-8 to -6 AF902-06-08 AF902-06-08BLK AF902-06-08S Dimensions Height from O-ring
-8 to -8 AF902-08 AF902-08BLK AF902-08S
-8 to -10 AF902-10-08 AF902-10-08BLK AF902-10-08S AF909-06 23.75mm (13/16 )
-10 to -8 AF902-08-10 AF902-08-10BLK AF902-08-10S AF909-06-08 23.75mm (13/16 )
-10 to -10 AF902-10 AF902-10BLK AF902-10S AF909-08 28.65mm (1-1/8)
-10 to -12 AF902-12-10 AF902-12-10BLK AF902-12-10S AF909-06-10 29mm (1-9/64)
-12 to -10 AF902-10-12 AF902-10-12BLK AF902-10-12S AF909-08-10 29mm (1-9/64)
-12 to -12 AF902-12 AF902-12BLK AF902-12S AF909-10 29mm (1-9/64)
-16 to -12 AF902-12-16 AF902-12-16BLK AF902-12-16S AF909-12 35.5mm (1-13/32)
-16 to -16 AF902-16 AF902-16BLK AF902-16S
-20 to -16 AF902-16-20 AF902-16-20BLK AF902-16-20S
-20 to -20 AF902-20 AF902-20BLK AF902-20S
aeroflowperformance.com 71
 TRANSMISSION ADAPTERS

TRANSMISSION
& OIL COOLER
ADAPTER FITTINGS
TO SUIT GM AF64-2118

AF64-2119 C4 TRANSMISSION ADAPTER (Sold in pairs)

Part No Description Pack of

AF64-2117 AF395-06BLK 1/8”-27 straight NPSM to -6AN 2
AF395-08BLK 1/8”-27 straight NPSM to -8AN 2

Part No Description Pack of

AF64-2117 VE & VF trans cooler radiator adaptor male to -6AN (x2)
AF64-2119 VE & VF trans cooler radiator adaptor female to -6AN (x2)
AF64-2118 VE & VF trans cooler adaptor suits 6 speed 6L80E (x1)

AF385-06L AF385-06

FORD GM 4L80E TRANSMISSION

TRANSMISSION OIL COOLER ADAPTER FITTINGS
OIL COOLER Part No Description to suit
FITTINGS & ADAPTERS

ADAPTER FITTINGS AF385-06 1/4”-18 NPSM SHORT to -6AN designed to suit 4L80E
transmissions without tail on fitting (remove original
(2 per pack) AF72-5050 fittings to check what style you require)
These handy adapters have been AF385-06L 1/4”-18 NPSM LONG TAIL to -6AN designed to suit
tested on Ford Falcon, Mustang, 4L80E transmissions with long tail on fitting (remove
F150 and Territory. These 1 piece original fittings to check what style you require)
full flow adapters allow an easy AF386-06 9/16”-18 NPSM SHORT to -6AN designed to suit 4L80E
installation of a remote transmission transmissions without tail on fitting (remove original
oil cooler that is required when fittings to check what style you require)
engine performance has been
AF386-06L 9/16”-18 NPSM LONG to -6AN designed to suit 4L80E
upgraded or increased load from
transmissions with long tail on fitting (remove original
things like towing. Designed with
fittings to check what style you require)
-8AN ends to allow for different
plumbing combinations with the
ability to swivel to your desired
angle. Supplied with Viton O-Rings. AF72-5051
TRANS COOLER FITTINGS CHART
Part No Description to suit Transmission In Out
AF72-5050 Ford ZF 6HP26 trans port fittings. 16.4mm barb size Powerglide - OEM Upper 1/8" NPT Lower 1/8" NPT
AF72-5051 Ford 6R trans port fittings. 18.85mm barb size Powerglide - Dedenbear Upper 1/4"NPT Lower 1/4" NPT
TH200C Metric, 200-4R Lower 1/4" NPT Upper 1/4" NPT
Early TH250, TH350 Upper 1/4" NPT Lower 1/4" NPT
Late TH350,TH400 Upper 1/4" NPSM Lower 1/4" NPSM
700-4R, 4L60, 4L60E Upper 1/4" NPSM Lower 1/4" NPSM
4L80E 1991-96 Upper 1/4" NPT Lower 1/4" NPT
4L80E, 4L85E 1997-ON Rear 1/4" NPSM Front 1/4" NPSM
4L80E, 4L85E 1997-ON 9/16” -18 NPSM 9/16” -18 NPSM
6L80E O-ring seal O-ring seal
AOD Lower 1/4" NPT Upper 1/4" NPT
AODE, 4R70W Upper 1/4" NPT Lower 1/4" NPT
E4OD, 4R100 Upper 1/4" NPT Lower 1/4" NPT
Torqueflite - All Rear 1/8" NPT Front 1/8" NPT
Trimatic Rear 1/8” NPT Front 1/8” NPT
Jatco 3 speed Rear M12 x 1.5 Front M12 x 1.5
COOLER ADAPTERS (2 per pack) Jatco 4 speed Rear M14 x 1.5 Front M14 x 1.5
SUITS GM TH350 & TH400 TRANS Ford ZF 6HP26
Ford 6R
Push in with o-ring
Push in with o-ring
Push in with o-ring
Push in with o-ring
Part No Description Ford C6, C10 Upper 1/8” NPSM Lower 1/8” NPSM
Ford C4 Pan Fill Upper 1/8” NPSM Lower 1/8” NPSM
AF375-06BLK 1/4” NPSM straight thread to -6AN washers included Ford C4 Case Fill Upper 1/4” NPT Lower 1/4” NPT
AF375-08BLK 1/4” NPSM straight thread to -8AN washers included
AF59-3750 Replacement copper washers 2 per pack Note: - NPT = tapered thread
Note: - NPSM = straight thread
Note: Suits late TH350 and TH400 with washer seal.
Please check OEM fittings for compatibility

72
 ADAPTERS

FEMALE INVERTED to AN
FEMALE METRIC O-RING to AN
Thread AN Part No Description
Thread AN Blue Black Silver
1/2”-20 Inv -6 AF709-06 Steel fitting
1/2”-20 Inv -8 AF709-08 Steel fitting M14 x 1.5mm -6 AF711-06 AF711-06BLK AF711-06S
5/8”-18 Inv -6 AF710-06 Steel fitting M16 x 1.5mm -6 AF712-06 AF712-06BLK AF712-06S
5/8”-18 Inv -8 AF710-08 Steel fitting

Washers
located on
page 80

INVERTED FLARE ADAPTERS to AN METRIC to MALE FLARE ADAPTERS

Thread AN Blue Black Silver Metric to AN Blue Black Silver
7/16”-24 Inv -6 AF702-06 AF702-06BLK AF702-06S
3/8”-24 Inv -6 AF707-06 AF707-06BLK AF707-06S M8 x 1.0mm to -4 AF728-04 AF728-04BLK AF728-04S
3/8”-24 Inv -8 AF707-08 AF707-08BLK AF707-08S
1/2”-20 Inv -6 AF703-06 AF703-06BLK AF703-06S M10 x 1.0mm to -4 AF743-04 AF743-04BLK AF743-04S
1/2”-20 Inv -8 AF703-08 AF703-08BLK AF703-08S M10 x 1.0mm to -6 AF729-06 AF729-06BLK AF729-06S
5/8”-18 Inv -4 AF704-04 AF704-04BLK AF704-04S
5/8”-18 Inv -6 AF704-06 AF704-06BLK AF704-06S M10 x 1.25mm to -4 AF744-04 AF744-04BLK AF744-04S
5/8”-18 Inv -8 AF704-08 AF704-08BLK AF704-08S M10 x 1.25mm to -6 AF744-06 AF744-06BLK AF744-06S

FITTINGS & ADAPTERS

11/16”-18 Inv -6 AF705-06 AF705-06BLK AF705-06S
M10 x 1.5mm to -4 AF729-04 AF729-04BLK AF729-04S
M10 x 1.5mm to -6 AF745-06 AF745-06BLK AF745-06S
M10 x 1.5mm to -8 AF729-08 AF729-08BLK AF729-08S

M12 x 1.0mm to -6 AF738-06 AF738-06BLK AF738-06S

M12 x 1.25mm to -4 AF730-04 AF730-04BLK AF730-04S
M12 x 1.25mm to -6 AF730-06 AF730-06BLK AF730-06S
M12 x 1.25mm to -8 AF730-08 AF730-08BLK AF730-08S

FEMALE METRIC INVERTED to AN M12 x 1.5mm to -4 AF731-04 AF731-04BLK AF731-04S

M12 x 1.5mm to -6 AF731-06 AF731-06BLK AF731-06S
Can be used for Subaru, Nissan, Toyota and Honda. OEM power steering
M12 x 1.5mm to -8 AF731-08 AF731-08BLK AF731-08S
hard lines to convert to AN.
M14 x 1.5mm to -4 AF732-04 AF732-04BLK AF732-04S
Thread AN Blue Black Silver
M14 x 1.5mm to -6 AF732-06 AF732-06BLK AF732-06S
M14x1.5mm Inv -6 AF361-06 AF361-06BLK AF361-06S M14 x 1.5mm to -8 AF732-08 AF732-08BLK AF732-08S
M14 x 1.5mm to -10 AF732-10 AF732-10BLK AF732-10S
M14 x 1.5mm to -12 AF732-12 AF732-12BLK AF732-12S

M16 x 1.5mm to -6 AF733-06 AF733-06BLK AF733-06S

M16 x 1.5mm to -8 AF733-08 AF733-08BLK AF733-08S
M16 x 1.5mm to -10 AF733-10 AF733-10BLK AF733-10S
M16 x 1.5mm to -12 AF733-12 AF733-12BLK AF733-12S

M18 x 1.5mm to -6 AF734-06 AF734-06BLK AF734-06S

M18 x 1.5mm to -8 AF734-08 AF734-08BLK AF734-08S
M18 x 1.5mm to -10 AF734-10 AF734-10BLK AF734-10S
M18 x 1.5mm to -12 AF734-12 AF734-12BLK AF734-12S

M20 x 1.5mm to -6 AF735-06 AF735-06BLK AF735-06S

M20 x 1.5mm to -8 AF735-08 AF735-08BLK AF735-08S
WASHER SEAL BSPP to AN ADAPTERS M20 x 1.5mm to -10 AF735-10 AF735-10BLK AF735-10S
(Parallel Thread) M20 x 1.5mm to -12 AF735-12 AF735-12BLK AF735-12S

M22 x 1.5mm to -4 AF736-04 AF736-04BLK AF736-04S

BSPP to AN Blue Black Silver M22 x 1.5mm to -6 AF736-06 AF736-06BLK AF736-06S
1/4” to -6 AF750-06 AF750-06BLK AF750-06S M22 x 1.5mm to -8 AF736-08 AF736-08BLK AF736-08S
3/8” to -6 AF751-06 AF751-06BLK AF751-06S M22 x 1.5mm to -10 AF736-10 AF736-10BLK AF736-10S
3/8” to -8 AF751-08 AF751-08BLK AF751-08S M22 x 1.5mm to -12 AF736-12 AF736-12BLK AF736-12S
3/8” to -10 AF751-10 AF751-10BLK AF751-10S M22 x 1.5mm to -16 AF736-16 AF736-16BLK AF736-16S
1/2” to -6 AF752-06 AF752-06BLK AF752-06S
1/2” to -8 AF752-08 AF752-08BLK AF752-08S M24 x 1.5mm to -10 AF737-10 AF737-10BLK AF737-10S
1/2” to -10 AF752-10 AF752-10BLK AF752-10S M24 x 1.5mm to -12 AF737-12 AF737-12BLK AF737-12S
1/2” to -12 AF752-12 AF752-12BLK AF752-12S
5/8” to -10 AF753-10 AF753-10BLK AF753-10S Note: All metric adapters have a female inverted flare.
3/4” to -10 AF754-10 AF754-10BLK AF754-10S Crush washer NOT INCLUDED
3/4” to -12 AF754-12 AF754-12BLK AF754-12S

aeroflowperformance.com 73
 ADAPTERS

S/S NPT MALE TO AN

Aeroflow Performance have designed this 304 stainless steel 1/16” NPT to
-3AN and -4AN for applications such as external wastegates and radiator NPT to STRAIGHT MALE FLARE ADAPTERS
necks. Being a 304 stainless steel it can withstand extreme heat and is high
strength compared to the standard alloy fitting which can break over time in
NPT to AN Blue Black Silver
racing applications.
1/16” to -3 AF816-03-01 AF816-03-01BLK AF816-03-01S
Part No Description 1/8” to -3 AF816-03 AF816-03BLK AF816-03S
1/4” to -3 AF816-03-04 AF816-03-04BLK AF816-03-04S
AF380-03-01 1/16” NPT to Male -3 3/8” to -3 AF816-03-06 AF816-03-06BLK AF816-03-06S
AF380-04-01 1/16” NPT to Male -4 1/2” to -3 AF816-03-08 AF816-03-08BLK AF816-03-08S
1/16” to -4 AF816-04-01 AF816-04-01BLK AF816-04-01S
1/8” to -4 AF816-04 AF816-04BLK AF816-04S
1/4” to -4 AF816-04-04 AF816-04-04BLK AF816-04-04S
3/8” to -4 AF816-04-06 AF816-04-06BLK AF816-04-06S
1/2” to -4 AF816-04-08 AF816-04-08BLK AF816-04-08S
1/8” to -6 AF816-06-02 AF816-06-02BLK AF816-06-02S
1/4” to -6 AF816-06 AF816-06BLK AF816-06S
3/8” to -6 AF816-06-06 AF816-06-06BLK AF816-06-06S
1/2” to -6 AF816-06-08 AF816-06-08BLK AF816-06-08S
3/4” to -6 AF816-06-12 AF816-06-12BLK AF816-06-12S
1/8” to -8 AF816-08-02 AF816-08-02BLK AF816-08-02S
1/4” to -8 AF816-08-04 AF816-08-04BLK AF816-08-04S
FITTINGS & ADAPTERS

3/8” to -8 AF816-08 AF816-08BLK AF816-08S

1/2” to -8 AF816-08-08 AF816-08-08BLK AF816-08-08S
3/4” to -8 AF816-08-12 AF816-08-12BLK AF816-08-12S
1/4” to -10 AF816-10-04 AF816-10-04BLK AF816-10-04S
3/8” to -10 AF816-10-06 AF816-10-06BLK AF816-10-06S
1/2” to -10 AF816-10 AF816-10BLK AF816-10S
BSP to AN ADAPTERS (Tapered Thread) 3/4” to -10 AF816-10-12 AF816-10-12BLK AF816-10-12S
1” to -10 AF816-10-16 AF816-10-16BLK AF816-10-16S
BSPT to AN Blue Black Silver 3/4” to -12 AF816-12 AF816-12BLK AF816-12S
1/2” to -12 AF816-12-08 AF816-12-08BLK AF816-12-08S
1/8” to -6 AF755-06 AF755-06BLK AF755-06S 1” to -12 AF816-12-16 AF816-12-16BLK AF816-12-16S
1/4” to -6 AF756-06 AF756-06BLK AF756-06S 3/4” to -16 AF816-16-12 AF816-16-12BLK AF816-16-12S
3/8” to -6 AF757-06 AF757-06BLK AF757-06S 1” to -16 AF816-16 AF816-16BLK AF816-16S
3/8” to -8 AF757-08 AF757-08BLK AF757-08S 1” to -20 AF816-20-16 AF816-20-16BLK AF816-20-16S
3/8” to -10 AF757-10 AF757-10BLK AF757-10S 1-1/4” to -16 AF816-16-20 AF816-16-20BLK AF816-16-20S
1/2” to -8 AF758-08 AF758-08BLK AF758-08S 1-1/4” to -20 AF816-20 AF816-20BLK AF816-20S
1/2” to -10 AF758-10 AF758-10BLK AF758-10S
3/4” to -10 AF759-10 AF759-10BLK AF759-10S These part numbers are available in packs of 25 fittings.
Add -25 to end of part number eg. AF816-06-06BLK-25

74 aeroflowperformance.com
 NPT ADAPTERS

MALE NPT to AN WITH 1/8” NPT PORT

NPT to AN Blue Black Silver 45° NPT to AN FULL FLOW ADAPTERS
1/8” to -4 AF139-04-02 AF139-04-02BLK AF139-04-02S
1/8” to -6 AF139-06-02 AF139-06-02BLK AF139-06-02S NPT to AN Blue Black Silver
1/4” to -6 AF139-06-04 AF139-06-04BLK AF139-06-04S 1/8” to -3 AF523-03 AF523-03BLK AF523-03S
3/8” to -6 AF139-06-08 AF139-06-08BLK AF139-06-08S 1/8” to -4 AF523-04 AF523-04BLK AF523-04S
1/4” to -8 AF139-08-04 AF139-08-04BLK AF139-08-04S 1/8” to -6 AF523-06-02 AF523-06-02BLK AF523-06-02S
3/8” to -8 AF139-08-06 AF139-08-06BLK AF139-08-06S 1/4” to -4 AF523-04-04 AF523-04-04BLK AF523-04-04S
1/4” to -6 AF523-06 AF523-06BLK AF523-06S
1/4” to -8 AF523-08-04 AF523-08-04BLK AF523-08-04S
3/8” to -6 AF523-06-06 AF523-06-06BLK AF523-06-06S
3/8” to -8 AF523-08 AF523-08BLK AF523-08S
3/8” to -10 AF523-10-06 AF523-10-06BLK AF523-10-06S
1/2” to -6 AF523-06-08 AF523-06-08BLK AF523-06-08S
1/2” to -8 AF523-08-08 AF523-08-08BLK AF523-08-08S
1/2” to -10 AF523-10 AF523-10BLK AF523-10S
1/2” to -12 AF523-12-08 AF523-12-08BLK AF523-12-08S
3/4” to -10 AF523-10-12 AF523-10-12BLK AF523-10-12S
3/4” to -12 AF523-12 AF523-12BLK AF523-12S
3/4” to -16 AF523-16-12 AF523-16-12BLK AF523-16-12S
45° NPT to MALE FLARE ADAPTERS 1” to -16 AF523-16 AF523-16BLK AF523-16S
1” to -20 AF523-16-20 AF523-16-20BLK AF523-16-20S
NPT to AN Blue Black Silver
1/8” to -3 AF823-03 AF823-03BLK AF823-03S
1/8” to -4 AF823-04 AF823-04BLK AF823-04S
1/8” to -6 AF823-06-02 AF823-06-02BLK AF823-06-02S
1/4” to -4 AF823-04-04 AF823-04-04BLK AF823-04-04S

FITTINGS & ADAPTERS

1/4” to -6 AF823-06 AF823-06BLK AF823-06S
1/4” to -8 AF823-08-04 AF823-08-04BLK AF823-08-04S
3/8” to -6 AF823-06-06 AF823-06-06BLK AF823-06-06S
3/8” to -8 AF823-08 AF823-08BLK AF823-08S
3/8” to -10 AF823-10-06 AF823-10-06BLK AF823-10-06S
1/2” to -6 AF823-06-08 AF823-06-08BLK AF823-06-08S
1/2” to -8
1/2” to -10
AF823-08-08
AF823-10
AF823-08-08BLK
AF823-10BLK
AF823-08-08S
AF823-10S
90° NPT to AN FULL FLOW ADAPTERS
1/2” to -12 AF823-12-08 AF823-12-08BLK AF823-12-08S
3/4” to -10 AF823-10-12 AF823-10-12BLK AF823-10-12S NPT to AN Blue Black Silver
3/4” to -12 AF823-12 AF823-12BLK AF823-12S
1/8” to -3 AF522-03 AF522-03BLK AF522-03S
3/4” to -16 AF823-16 AF823-16BLK AF823-16S
1/8” to -4 AF522-04 AF522-04BLK AF522-04S
1” to -16 AF823-16-16 AF823-16-16BLK AF823-16-16S
1/4” to -4 AF522-04-04 AF522-04-04BLK AF522-04-04S
1” to -20 AF823-16-20 AF823-16-20BLK AF823-16-20S
1/8” to -6 AF522-06-02 AF522-06-02BLK AF522-06-02S
1/4” to -6 AF522-06 AF522-06BLK AF522-06S
3/8” to -6 AF522-06-06 AF522-06-06BLK AF522-06-06S
1/2” to -6 AF522-06-08 AF522-06-08BLK AF522-06-08S
1/4” to -8 AF522-08-04 AF522-08-04BLK AF522-08-04S
3/8” to -8 AF522-08 AF522-08BLK AF522-08S
1/2” to -8 AF522-08-08 AF522-08-08BLK AF522-08-08S
3/8” to -10 AF522-10-06 AF522-10-06BLK AF522-10-06S
1/2” to -10 AF522-10 AF522-10BLK AF522-10S
3/4” to -10 AF522-10-12 AF522-10-12BLK AF522-10-12S
1/2” to -12 AF522-12-08 AF522-12-08BLK AF522-12-08S

90° NPT to MALE FLARE ADAPTERS 3/4” to -12

3/4” to -16
AF522-12
AF522-16-12
AF522-12BLK
AF522-16-12BLK
AF522-12S
AF522-16-12S
1” to -16 AF522-16 AF522-16BLK AF522-16S
NPT to AN Blue Black Silver 1” to -20 AF522-16-20 AF522-16-20BLK AF522-16-20S

1/8” to -3 AF822-03 AF822-03BLK AF822-03S

1/8” to -4 AF822-04 AF822-04BLK AF822-04S
1/4” to -4 AF822-04-04 AF822-04-04BLK AF822-04-04S
1/8” to -6 AF822-06-02 AF822-06-02BLK AF822-06-02S
1/4” to -6 AF822-06 AF822-06BLK AF822-06S
3/8” to -6 AF822-06-06 AF822-06-06BLK AF822-06-06S
1/2” to -6 AF822-06-08 AF822-06-08BLK AF822-06-08S
3/8” to -8 AF822-08 AF822-08BLK AF822-08S
1/4” to -8 AF822-08-04 AF822-08-04BLK AF822-08-04S
1/2” to -8 AF822-08-08 AF822-08-08BLK AF822-08-08S
3/8” to -10 AF822-10-06 AF822-10-06BLK AF822-10-06S
1/2” to -10 AF822-10 AF822-10BLK AF822-10S
3/4” to -10 AF822-10-12 AF822-10-12BLK AF822-10-12S STRAIGHT FEMALE NPT to MALE AN
1/2” to -12 AF822-12-08 AF822-12-08BLK AF822-12-08S
3/4” to -12 AF822-12 AF822-12BLK AF822-12S NPT to AN Blue Black Silver
3/4” to -16 AF822-16 AF822-16BLK AF822-16S
1” to -16 AF822-16-16 AF822-16-16BLK AF822-16-16S 1/8” to -3 AF370-03 AF370-03BLK AF370-03S
1” to -20 AF822-20-16 AF822-20-16BLK AF822-20-16S 1/8” to -4 AF370-04 AF370-04BLK AF370-04S

aeroflowperformance.com 75
 NPT FITTINGS

45° FEMALE NPT to MALE AN

NPT to AN Blue Black Silver
90° FEMALE NPT to MALE NPT
1/8” to -3 AF371-03 AF371-03BLK AF371-03S NPT Blue Black Silver
1/8” to -4 AF371-04 AF371-04BLK AF371-04S
1/8” AF914-02 AF914-02BLK AF914-02S
1/4” AF914-04 AF914-04BLK AF914-04S
3/8” AF914-06 AF914-06BLK AF914-06S
1/2” AF914-08 AF914-08BLK AF914-08S
3/4” AF914-10 AF914-10BLK AF914-10S
1” AF914-16 AF914-16BLK AF914-16S
1-1/4” AF914-20 AF914-20BLK AF914-20S

90° FEMALE NPT to MALE AN

NPT to AN Blue Black Silver
1/8” to -3 AF373-03 AF373-03BLK AF373-03S
1/8” to -4 AF373-04 AF373-04BLK AF373-04S MALE NPT to FEMALE AN STRAIGHT
NPT to AN Blue Black Silver
FITTINGS & ADAPTERS

1/8” to -3 AF916-03-02 AF916-03-02BLK AF916-03-02S

1/8” to -4 AF916-04-02 AF916-04-02BLK AF916-04-02S
1/4” to -4 AF916-04-04 AF916-04-04BLK AF916-04-04S
1/8” to -6 AF916-06-02 AF916-06-02BLK AF916-06-02S
1/4” to -6 AF916-06-04 AF916-06-04BLK AF916-06-04S
3/8” to -6 AF916-06-06 AF916-06-06BLK AF916-06-06S
1/4” to -8 AF916-08-04 AF916-08-04BLK AF916-08-04S
3/8” to -8 AF916-08-06 AF916-08-06BLK AF916-08-06S
1/2” to -8 AF916-08-08 AF916-08-08BLK AF916-08-08S
3/8” to -10 AF916-10-06 AF916-10-06BLK AF916-10-06S
1/2” to -10 AF916-10-08 AF916-10-08BLK AF916-10-08S
3/4” to -12 AF916-12-12 AF916-12-12BLK AF916-12-12S
NPT MALE-FEMALE EXTENSION 1/2” to -12 AF916-12-08 AF916-12-08BLK AF916-12-08S
3/4” to -16 AF916-16-12 AF916-16-12BLK AF916-16-12S
NPT Length Blue Black Silver
1/8” 1-1/4” 31.75mm AF372-02 AF372-02BLK AF372-02S
1/4” 1-1/2” 38.1mm AF372-04 AF372-04BLK AF372-04S
3/8” 2” 50.8mm AF372-06 AF372-06BLK AF372-06S
1/2” 2” 50.8mm AF372-08 AF372-08BLK AF372-08S

45° NPT SWIVEL to FEMALE AN

NPT to AN Blue Black Silver
1/8” to -3 AF919-03-02 AF919-03-02BLK AF919-03-02S
1/8” to -4 AF919-04-02 AF919-04-02BLK AF919-04-02S
1/4” to -4 AF919-04-04 AF919-04-04BLK AF919-04-04S
45° FEMALE NPT to MALE NPT 1/8” to -6 AF919-06-02 AF919-06-02BLK AF919-06-02S
1/4” to -6 AF919-06-04 AF919-06-04BLK AF919-06-04S
3/8” to -6 AF919-06-06 AF919-06-06BLK AF919-06-06S
NPT Blue Black Silver 1/4” to -8 AF919-08-04 AF919-08-04BLK AF919-08-04S
1/8” AF915-02 AF915-02BLK AF915-02S 3/8” to -8 AF919-08-06 AF919-08-06BLK AF919-08-06S
1/4” AF915-04 AF915-04BLK AF915-04S 1/2” to -8 AF919-08-08 AF919-08-08BLK Silver
AF919-08-08S
3/8” AF915-06 AF915-06BLK AF915-06S 3/8” to -10 AF919-10-06 AF919-10-06BLK AF919-10-06S
1/2” AF915-08 AF915-08BLK AF915-08S 1/2” to -10 AF919-10-08 AF919-10-08BLK AF919-10-08S
3/4” AF915-10 AF915-10BLK AF915-10S 1/2” to -12 AF919-12-08 AF919-12-08BLK AF919-12-08S
1” AF915-16 AF915-16BLK AF915-16S 3/4” to -12 AF919-12-12 AF919-12-12BLK AF919-12-12S
1-1/4” AF915-20 AF915-20BLK AF915-20S 3/4” to -16 AF919-16-12 AF919-16-12BLK AF919-16-12S

76 aeroflowperformance.com
 NPT FITTINGS

90° NPT SWIVEL to FEMALE AN

NPT to AN Blue Black Silver
1/8” to -3 AF923-03-02 AF923-03-02BLK AF923-03-02S
1/8” to -4 AF923-04-02 AF923-04-02BLK AF923-04-02S TEE WITH NPT ON RUN
1/4” to -4 AF923-04-04 AF923-04-04BLK AF923-04-04S
1/8” to -6 AF923-06-02 AF923-06-02BLK AF923-06-02S
1/4” to -6 AF923-06-04 AF923-06-04BLK AF923-06-04S NPT to AN Blue Black Silver
3/8” to -6 AF923-06-06 AF923-06-06BLK AF923-06-06S
1/8” to -3 AF826-03 AF826-03BLK AF826-03S
1/4” to -8 AF923-08-04 AF923-08-04BLK AF923-08-04S
1/8” to -4 AF826-04 AF826-04BLK AF826-04S
3/8” to -8 AF923-08-06 AF923-08-06BLK AF923-08-06S
1/4” to -4 AF826-04-04 AF826-04-04BLK AF826-04-04S
1/2” to -8 AF923-08-08 AF923-08-08BLK AF923-08-08S
1/4” to -6 AF826-06 AF826-06BLK AF826-06S
3/8” to -10 AF923-10-06 AF923-10-06BLK AF923-10-06S
3/8” to -6 AF826-06-06 AF826-06-06BLK AF826-06-06S
1/2” to -10 AF923-10-08 AF923-10-08BLK AF923-10-08S
3/8” to -8 AF826-08 AF826-08BLK AF826-08S
3/4” to -12 AF923-12-12 AF923-12-12BLK AF923-12-12S
1/2” to -8 AF826-08-08 AF826-08-08BLK AF826-08-08S
1/2” to -12 AF923-12-08 AF923-12-08BLK AF923-12-08S
1/2” to -10 AF826-10 AF826-10BLK AF826-10S
3/4” to -16 AF923-16-12 AF923-16-12BLK AF923-16-12S
3/4” to -12 AF826-12 AF826-12BLK AF826-12S
3/4” to -16 AF826-16 AF826-16BLK AF826-16S
1” to -20 AF826-16-20 AF826-16-20BLK AF826-16-20S
1-1/4” to -20 AF826-20 AF826-20BLK AF826-20S

FITTINGS & ADAPTERS

90° NPT SWIVEL to MALE AN FLARE
NPT to AN Blue Black Silver
1/8” to -3 AF922-03-02 AF922-03-02BLK AF922-03-02S
1/8” to -4 AF922-04-02 AF922-04-02BLK AF922-04-02S
1/4” to -4 AF922-04-04 AF922-04-04BLK AF922-04-04S
1/8” to -6 AF922-06-02 AF922-06-02BLK AF922-06-02S
1/4” to -6 AF922-06-04 AF922-06-04BLK AF922-06-04S
3/8” to -6 AF922-06-06 AF922-06-06BLK AF922-06-06S
1/4” to -8 AF922-08-04 AF922-08-04BLK AF922-08-04S
3/8” to -8 AF922-08-06 AF922-08-06BLK AF922-08-06S
1/2” to -8 AF922-08-08 AF922-08-08BLK Silver
AF922-08-08S
3/8” to -10 AF922-10-06 AF922-10-06BLK AF922-10-06S
1/2” to -10 AF922-10-08 AF922-10-08BLK AF922-10-08S
1/2” to -12
3/4” to -12
AF922-12-08
AF922-12-12
AF922-12-08BLK
AF922-12-12BLK
AF922-12-08S
AF922-12-12S
MALE TEE WITH FEMALE 1/8” NPT
3/4” to -16 AF922-16-12 AF922-16-12BLK AF922-16-12S
AN Blue Black Silver
-3 AF918-03-02 AF918-03-02BLK AF918-03-02S
-4 AF918-04-02 AF918-04-02BLK AF918-04-02S

TEE WITH NPT ON SIDE

NPT to AN Blue Black Silver
1/8” to -3 AF825-03 AF825-03BLK AF825-03S
1/8” to -4 AF825-04 AF825-04BLK AF825-04S
1/4” to -4 AF825-04-04 AF825-04-04BLK AF825-04-04S
1/4” to -6 AF825-06 AF825-06BLK AF825-06S
3/8” to -6 AF825-06-06 AF825-06-06BLK AF825-06-06S MALE TEE WITH STEPPED SIDE
3/8” to -8 AF825-08 AF825-08BLK AF825-08S
1/2” to -8 AF825-08-08 AF825-08-08BLK AF825-08-08S
Run Side Blue Black Silver
1/2” to -10 AF825-10 AF825-10BLK AF825-10S
3/4” to -12 AF825-12 AF825-12BLK AF825-12S -6 -4 AF831-04-06 AF831-04-06BLK AF831-04-06S
3/4” to -16 AF825-16 AF825-16BLK AF825-16S -8 -6 AF831-06-08 AF831-06-08BLK AF831-06-08S
1” to -20 AF825-16-20 AF825-16-20BLK AF825-16-20S -10 -8 AF831-08-10 AF831-08-10BLK AF831-08-10S
1-1/4” to -20 AF825-20 AF825-20BLK AF825-20S

aeroflowperformance.com 77
 NPT ADAPTERS

MALE AN STEPPED FLARE TEE 90o FEMALE NPT COUPLERS

WITH 1/8” NPT PORTS NPT Blue Black Silver
Perfect for use with Aeroflow’s -8AN carb inlet rail kits when running -6 feed
line featuring dual 1/8” NPT ports for universal gauge fitments. 1/8” AF913-02 AF913-02BLK AF913-02S
Male tee with 2 x -8 and 1 x -6 on run 1/4” AF913-04 AF913-04BLK AF913-04S
3/8” AF913-06 AF913-06BLK AF913-06S
1/2” AF913-08 AF913-08BLK AF913-08S
Male AN Blue Black Silver
2x -8, 1x-6 AF824-06-08 AF824-06-08BLK AF824-06-08S

FEMALE NPT PIPE TEES

NPT Blue Black Silver
MALE NPT COUPLERS 1/8” AF917-02 AF917-02BLK AF917-02S
1/4” AF917-04 AF917-04BLK AF917-04S
3/8” AF917-06 AF917-06BLK AF917-06S
NPT Blue Black Silver 1/2” AF917-08 AF917-08BLK AF917-08S
3/4” AF917-12 AF917-12BLK AF917-12S
FITTINGS & ADAPTERS

1/8” AF911-02 AF911-02BLK AF911-02S

1/4” AF911-04 AF911-04BLK AF911-04S 1” AF917-16 AF917-16BLK AF917-16S
3/8” AF911-06 AF911-06BLK AF911-06S
1/2” AF911-08 AF911-08BLK AF911-08S
3/4” AF911-12 AF911-12BLK AF911-12S
1” AF911-16 AF911-16BLK AF911-16S

NPT PIPE EXPANDERS

NPT Blue Black Silver
1/8” to 1/4” AF912-02-04 AF912-02-04BLK AF912-02-04S
1/4” to 3/8” AF912-04-06 AF912-04-06BLK AF912-04-06S

FEMALE NPT COUPLERS

NPT Blue Black Silver
1/8” AF910-02 AF910-02BLK AF910-02S
1/4” AF910-04 AF910-04BLK AF910-04S
3/8” AF910-06 AF910-06BLK AF910-06S
1/2” AF910-08 AF910-08BLK AF910-08S
3/4” AF910-12 AF910-12BLK AF910-12S
1” AF910-16 AF910-16BLK AF910-16S

NPT PIPE REDUCERS

NPT Blue Black Silver
1/4” to 1/8” AF912-04-02 AF912-04-02BLK AF912-04-02S
3/8” to 1/8” AF912-06-02 AF912-06-02BLK AF912-06-02S
3/8” to 1/4” AF912-06-04 AF912-06-04BLK AF912-06-04S
1/2” to 1/8” AF912-08-02 AF912-08-02BLK AF912-08-02S
1/2” to 1/4” AF912-08-04 AF912-08-04BLK AF912-08-04S
1/2” to 3/8” AF912-08-06 AF912-08-06BLK AF912-08-06S
3/4” to 1/4” AF912-12-04 AF912-12-04BLK AF912-12-04S
1/8” BSP MALE TO 1/8” NPT FEMALE 3/4” to 3/8”
3/4” to 1/2”
AF912-12-06
AF912-12-08
AF912-12-06BLK
AF912-12-08BLK
AF912-12-06S
AF912-12-08S
1” to 3/8” AF912-16-06 AF912-16-06BLK AF912-16-06S
BSP to NPT Blue Black Silver 1” to 1/2” AF912-16-08 AF912-16-08BLK AF912-16-08S
1” to 3/4” AF912-16-12 AF912-16-12BLK AF912-16-12S
1/8” to 1/8” AF925-04-04 AF925-04-04BLK AF925-04-04S

78 aeroflowperformance.com
 QUICK RELEASE FITTINGS

QUICK RELEASE BULKHEAD FITTINGS

QUICK RELEASE ALUMINIUM FITTINGS Quick Release EPDM seal with bulkhead. For use with brake* or clutch

Aeroflow’s quick release fittings are a market break through. These light *(NOT for road use Off-road and race use only)
weight fittings are made from billet 6061-T6 aluminium. They are anodized
to safe guard your fittings against corrosion. They have been tested up to Part No Description
15000psi and are a perfect choice for brake *(NOT for road use Off-road and
race use only), clutch or fuel lines depending which seal you choose. They AFQR103-03BH Aluminium Quick Release with bulkhead
connect by hand in seconds. Perfect for anti-theft device. These fittings are AFQR103-04BH Aluminium Quick Release with bulkhead
designed for leak free release. Please refer application guide. Aeroflow’s AFQR104-03BH Titanium Quick Release with bulkhead
quick release fittings are also available with a heavy duty Titanium body. AFQR104-04BH Titanium Quick Release with bulkhead
NOT suitable for fuel or oil.
Part No Description Application
AFQR103-03 Quick Release -3 EPDM Seal Black/Silver Alloy (Brake*)
AFQR103-04 Quick Release -4 EPDM Seal Black/Silver Alloy (Brake*)
AFQR101-04 Quick Release -4 Viton Seal Black Aluminium (Fuel &Oil)
AFQR101-06 Quick Release -6 Viton Seal Black Aluminium (Fuel &Oil)
AFQR101-08 Quick Release -8 Viton Seal Black Aluminium (Fuel &Oil)
AFQR101-10 Quick Release -10 Viton Seal Black Aluminium (Fuel &Oil)
AFQR201-06 Quick Release -6 Buna N Seal Black Aluminium (Eth/Meth)
AFQR201-08 Quick Release -8 Buna N Seal Black Aluminium (Eth/Meth)
AFQR201-10 Quick Release -10 Buna N Seal Black Aluminium(Eth/Meth)
NOTE: EPDM seals must be used in brake applications. Viton seals are
recommended for unleaded fuels & oiling applications. Buna N seals are
QUICK RELEASE LIGHT WEIGHT
recomended for all ethanol & methanol blended fuels. TITANIUM FITTINGS
Aeroflow’s Small Diameter Titanium quick release fitting are even lighter
and more compact than before. These super lightweight small diameter

FITTINGS & ADAPTERS

fittings are made from Titanium. They have been tested up to 15000psi
and are fitted with EPDM seals and are a perfect choice for brake (NOT
for road use off-road & race use only) application. These fittings are known
as “Dry Breaks” because you can quickly separate a hose containing fluid
under pressure without leaks. NOTE: EPDM seals must be used in brake
applications.

Part No Description
AFQR104-03SD Quick Release -3 EPDM Seal Titanium (Brake*)

QUICK RELEASE TITANIUM FITTINGS NOTE: For use in brake applications must use fittings with EPDM seal.
Black Titanium

Part No Description Application

AFQR104-03 -3 EPDM Seal (Brake) (NOT for road use race only)
AFQR104-04 -4 EPDM Seal (Brake) (NOT for road use race only)
AFQR102-06 -6 Viton Seal (Fuel & Oil)
AFQR102-08 -8 Viton Seal (Fuel & Oil)
AFQR102-10 -10 Viton Seal (Fuel & Oil)
NOTE: For use in brake applications must use fittings with EPDM seal.
Viton seals are recommended for unleaded fuels & oiling applications.

QUICK RELEASE STAINLESS STEEL FITTINGS

Part No Description
AFQR105-03 Quick Release -3 EPDM Seal Black Stainless
(NOT for road use race only)
NOTE: For use in brake applications must use fittings with EPDM seal.

aeroflowperformance.com 79
 WASHERS & O-RINGS

PTFE (Teflon) WASHERS (10 PACK)

Washer thickness 1.5mm (1/16”)
STAT-O-SEAL (10 PACK)
Stat-o-seals are manufactured with BUNA N rubber which is
compatable with unleaded, alcohol and ethanol fuels.
Part No I.D. Sizes O.D. Sizes Washer thickness 1.5mm (1/16”)

AF176-03 -3AN 9.52mm 3/8” 16mm 41/64” Part No Suit I.D. Sizes O.D. Sizes
AF176-04 -4AN 11.11mm 7/16” 17mm 43/64”
AF176-06 -6AN 14.28mm 9/16” 20mm 51/64” AF179-03 -3AN 9.53mm 3/8” 16.75mm 21/32”
AF176-08 -8AN 19.05mm 3/4” 25.30mm 63/64” AF179-04 -4AN 11.11mm 7/16” 19.20mm 49/64”
AF176-10 -10AN 22.22mm 7/8” 28.4mm 1-1/8” AF179-06 -6AN 14.29mm 9/16” 27mm 1-1/16”
AF176-12 -12AN 26.98mm 1-1/16” 33.3mm 1-5/16” AF179-08 -8AN 19.05mm 3/4” 28.4mm 1-1/8”
AF176-16 -16AN 32.94mm 1-19/64” 39.75mm 1-9/16” AF179-07 5/8” 15.8mm 5/8” 30.3mm 1-1/4”
AF176-KIT -3AN to -20AN AF179-10 -10AN 22.23mm 7/8” 38.25mm 1-33/64”
KIT CONTAINS 10 OF EACH SIZE

ALUMINIUM WASHERS (10 PACK) VITON RUBBER O-RINGS (10 PACK)

For use with unleaded fuels & oils
Washer thickness .95mm (1/32”)

Part No I.D. Sizes O.D. Sizes Part No Suit I.D. Sizes O.D. Sizes
AF177-03 -3AN 9.52mm 3/8” 16mm 41/64” AF178-03 -3AN 7.50mm 19/64” 10.7mm 27/64”
AF177-04 -4AN 11.11mm 7/16” 17mm 43/64” AF178-04 -4AN 9mm 23/64” 12.5mm 31/64”
AF177-05 12.7mm - 1/2” 18.7mm 47/64” AF178-05 -5AN 10.3mm 13/32” 13.9mm 35/64”
AF177-07 13.1mm - 33/64” 18.85mm 47/64” AF178-06 -6AN 12.1mm 15/32” 15.87mm 5/8”
AF177-06 -6AN 14.28mm 9/16” 20mm 51/64” AF178-08 -8AN 17.3mm 11/16” 20.70mm 13/16”
AF177-09 15.87mm - 5/8” 22.05mm 55/64” AF178-10 -10AN 19.30mm 49/64” 24.1mm 61/64”
AF177-10 -10AN 22.22mm 7/8” 28.4mm 1-1/8” AF178-12 -12AN 24mm 61/64” 29.5mm 1-5/32”
FITTINGS & ADAPTERS

AF177-12 -12AN 26.98mm 1-1/16” 33.3mm 1-5/16” AF178-16 -16AN 29mm 1-5/32” 35.5mm 1-25/64”
AF177-16 -16AN 32.94mm 1-19/64” 39.75mm 1-9/16” AF178-KIT -3AN to -20AN
AF177-KIT Aluminium washer -3AN to -20AN KIT CONTAINS 10 OF EACH SIZE
KIT CONTAINS 10 OF EACH SIZE

EPR RUBBER O-RINGS (10 PACK)

METRIC ALUMINIUM WASHERS (10 PACK) EPR - Ethylene Propylene Rubber compatable with alcohol, ethanol
Washer thickness .95mm (1/32”) and nitromethane fuels.

Part No I.D. Sizes O.D. Sizes Part No Suit I.D. Sizes O.D. Sizes

AF171-06 6mm 12.15mm AF175-03 -3AN 7.50mm 19/64” 10.7mm 27/64”

AF171-08 8mm 14.15mm AF175-04 -4AN 9mm 23/64” 12.5mm 31/64”
AF171-10 10mm 15.95mm AF175-05 -5AN 10.3mm 13/32” 13.9mm 35/64”
AF171-12 12mm 18.15mm AF175-06 -6AN 12.1mm 15/32” 15.87mm 5/8”
AF171-14 14mm 20.10mm AF175-08 -8AN 17.3mm 11/16” 20.70mm 13/16”
AF171-16 16mm 22.10mm AF175-10 -10AN 19.30mm 49/64” 24.1mm 61/64”
AF171-18 18mm 24.20mm AF175-12 -12AN 24mm 61/64” 29.5mm 1-5/32”
AF171-20 20mm 26.75mm AF175-16 -16AN 29mm 1-5/32” 35.5mm 1-25/64”
AF171-22 22mm 30.10mm AF175-20 -20AN 38.6mm 2-17/32” 43.05mm 2-45/64”
AF171-24 24mm 30.20mm AF175-KIT -3AN to -20AN
AF171-KIT Aluminium washer M6 to M24 KIT CONTAINS 10 OF EACH SIZE
KIT CONTAINS 10 OF EACH SIZE

BUNA N RUBBER O-RINGS (10 PACK)

For use with unleaded, alcohol and ethanol fuels
BSPP ALUMINIUM WASHERS (10 PACK)
Parallel thread. Washer thickness .95mm (1/32”) Part No Suit I.D. Sizes O.D. Sizes

Part No Thread Size I.D. Sizes O.D. Sizes AF174-03 -3AN 7.50mm 19/64” 10.7mm 27/64”
AF174-04 -4AN 9mm 23/64” 12.5mm 31/64”
AF172-01 1/8” 10mm 25/64” 15.55mm 39/64” AF174-05 -5AN 10.3mm 13/32” 13.9mm 35/64”
AF172-02 1/4” 13.40mm 17/32” 19.1mm 3/4” AF174-06 -6AN 12.1mm 15/32” 15.87mm 5/8”
AF172-03 3/8” 16.8mm 21/32” 22.7mm 57/64” AF174-08 -8AN 17.3mm 11/16” 20.70mm 13/16”
AF172-04 1/2” 21.20mm 27/32” 27.05mm 1-1/16” AF174-10 -10AN 19.30mm 49/64” 24.1mm 61/64”
AF172-05 5/8” 23.2mm 29/32” 29.5mm 1-5/32” AF174-12 -12AN 24mm 61/64” 29.5mm 1-5/32”
AF172-06 3/4” 26.7mm 1-1/16” 32.7mm 1-9/32” AF174-16 -16AN 29mm 1-5/32” 35.5mm 1-25/64”
AF172-KIT Aluminium washer 1/8” to 3/4” AF174-20 -20AN 38.6mm 2-17/32” 43.05mm 2-45/64”
KIT CONTAINS 10 OF EACH SIZE AF174-KIT -3AN to -20AN
KIT CONTAINS 10 OF EACH SIZE
80 aeroflowperformance.com
 BRAKE LINE & PTFE HOSE

COATED STEEL HARD LINE 304 STAINLESS STEEL HARD LINE

Aeroflow offer steel brake line for use with our stainless Aeroflow offer stainless hard line for use with our stainless
brake fittings. This product is an economical alternative brake fittings to give you a durable and professional finish.
that gives you a great chrome style high quality finish.

Part No Size Length

Part No Size Length
AF66-3316 3/16” 4.76mm 7.6M / 25ft
AF66-4316 3/16” 4.76mm 7.6M / 25ft

Note: Please ensure all hose is thoroughly

cleaned out before use.

BRAKE FITTINGS HOSE & ACCESSORIES

200 SERIES PTFE (TEFLON®) STAINLESS STEEL BRAIDED HOSE (suits brake fittings)
The Aeroflow 200 & 250 series hose has a PTFE inner liner with 308 stainless steel braid. It is a durable and professional hose that resists leaks and fumes.
It is rated to up to 4000 PSI. This hose is suitable for brake* lines.*(NOT for road use Off-road and race use only)
• Minimum temperature -70oC, Maximum temperature 250oC
STAINLESS

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-3 AF200-03-1M AF200-03-2M AF200-03-3M AF200-03-4.5M AF200-03-6M AF200-03-15M AF200-03-30M
-4 AF200-04-1M AF200-04-2M AF200-04-3M AF200-04-4.5M AF200-04-6M AF200-04-15M AF200-04-30M

AN 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 4.5 M / 14ft 9-3/16” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
BLACK

-3 AF200-03-1MBLK AF200-03-2MBLK AF200-03-3MBLK AF200-03-4.5MBLK AF200-03-6MBLK AF200-03-15MBLK AF200-03-30MBLK

-4 AF200-04-1MBLK AF200-04-2MBLK AF200-04-3MBLK AF200-04-4.5MBLK AF200-04-6MBLK AF200-04-15MBLK AF200-04-30MBLK

200 Series Hose Specifications

AN I.D. O.D. Operating Press Burst Press
-3 9/64“ 3.6mm 1/4” 6.4mm 4000PSI 12000PSI
-4 13/64” 5.1mm 21/64” 8mm 4000PSI 12000PSI

200 SERIES PTFE (TEFLON®) STAINLESS STEEL PVC COATED BRAIDED HOSE
(suits brake fittings)
Aeroflow now have a coated PTFE (Teflon) -3 hose. This high quality stainless hose has a PVC coating on it. It’s available in black and clear. It can also be
used with our 200 series fittings. This hose is suitable for brake* lines.*(NOT for road use Off-road and race use only).
NOTE: Clear coat MUST BE TRIMMED BACK to install fittings.

AN Cover 1 M / 3ft 3-3/8” 2 M / 6ft 6-3/4” 3 M / 9ft 10-1/8” 6 M / 19ft 8-1/4” 15 M / 49ft 2-9/16” 30 M / 98ft 5-1/8”
-3 CLEAR AF200-03-1MCC AF200-03-2MCC AF200-03-3MCC AF200-03-6MCC AF200-03-15MCC AF200-03-30MCC
-3 BLACK AF200-03-1MBLKC AF200-03-2MBLKC AF200-03-3MBLKC AF200-03-6MBLKC AF200-03-15MBLKC AF200-03-30MBLKC

200 Series Hose Specifications

AN I.D. O.D. Operating Press Burst Press
-3 0.142 in 3.6mm 0.29 in 7.35mm 4000PSI 12000PSI

aeroflowperformance.com 81
 BRAKE TOOLS & CLAMPS

HARDLINE PIPE CUTTER

Cut plastic, aluminium, copper or steel tubing without distorting or crushing.
Cutter works with tubing from 3.17mm (1/8”) up to 28.57mm (1-1/8”) and
has wide rollers for even tracking of cutter wheel, built in reamer for cleaning
inside of tubing and an extra cutting wheel.

Part No Description
AF98-2022 Hardline pipe cutting tool

PROFESSIONAL SINGLE & DOUBLE

FLARE TOOL KIT
Part No Description
AF98-2048 Pro flaring kit. 3/16” (4.76mm) to 3/8” (9.52mm) tube
single & double flare. Comes with 45o flare head & dies
200 SERIES HOSE CUTTER
for brake lines.
This ultra-sharp hand held cutter has been designed to use on our 200 series AF59-2448 37o AN flare head and dies for flaring hardline to suit AN
hose. These cutters will not leave residue as other methods of cutting does. adapters. 3/16” (4.76mm) to 1/2” (12.7mm)
Spare Parts
Part No Description AF59-2453 Replacement 3/16” 45o die
AF59-2450 Replacement 1/4” 45o dies
AF98-2016 Cuts -3 and -4 200 series teflon hose
AF59-2454 Replacement 3/8” 45o die
AF59-2451 Replacement Option 1 3/16” adapter
BRAKE FITTINGS HOSE & ACCESSORIES

AF59-2452 Replacement Option 2 3/16” adapter

AF59-2449 Replacement handle

LIGHT WEIGHT TUBE BENDER

A hand tool for precisely bending pipe, especially a little tweak during
installation in that hard to get position. For pipe size 1.58mm (1/16) to
6.35mm (1/4). The tool is able to bend tube with tube nut installed.

Part No Description
AF98-2009BLK Tube Bender

STAINLESS STEEL HARDLINE CLAMPS

Part No Description
AF300-00 4.76mm (3/16”) hardline Clamps 12 Pack
SINGLE FLARE TOOL AF300-01 9.52mm (3/8”) hardline Clamps 12 Pack

This tool will work with tubing from 3.17mm (1/8”) right
through to 19.05mm (3/4”). 45o flare for brake lines.

Part No Description
AF98-2008 Flare Tool 45 degree (For use with brake lines)

DUAL S/S HARDLINE CLAMP

WITH BRACKET
Part No Description
SINGLE & DOUBLE FLARE TOOL
AF301-03-03 4.76mm (3/16”) & 4.76mm (3/16”) Sold as singles
This 45o tool will work with 4.76mm (3/16”) tubing. Single or double flare tubing AF301-06-06 9.52mm (3/8”) & 9.52mm (3/8”) Sold as singles
in hard to access areas on vehicles or onsite. Includes 1x 10-32 button head cap screw bolt and 1 x self tapping screw

Part No Description
AF98-2057 Flare Tool 45 degree

82 aeroflowperformance.com
 BRAKE FITTINGS & CLAMPS

Quick
e
Releas

QUICK RELEASE ALUMINIUM FITTINGS

Aeroflow’s quick release fittings are a market break through. These light
weight fittings are made from billet 6061-T6 aluminium. They are anodized
to safe guard your fittings against corrosion. They have been tested up to
DUAL S/S HARDLINE CLAMPS 15000psi and are a perfect choice for brake *(NOT for road use Off-road and
race use only) or clutch lines connecting by hands in seconds. These fittings
Description Pack are designed for leak free release. Aeroflow’s quick release fittings are also
Part No
available with a heavy duty Titanium or Stainless body.
AF300-03-03 4.76mm (3/16”) & 4.76mm (3/16”) Sold as singles NOT suitable for fuel or oil.
AF300-04-04 6.4mm (1/4”) & 6.4mm (1/4”) Sold as singles
AF300-06-01 4.76mm (3/16”) & 9.52mm (3/8”) 6 Pack Part No Description
AF300-06-05 7.93mm (5/16”) & 9.52mm (3/8”) 6 Pack
AF300-05-05 7.93mm (5/16”) & 7.93mm (5/16”) Sold as singles AFQR103-03 Quick Release -3 EPDM Seal Black/Silver Alloy
AF300-06-06 9.52mm (3/8”) & 9.52mm (3/8”) Sold as singles AFQR103-04 Quick Release -4 EPDM Seal Black/Silver Alloy
AF300-10-10 15.9mm (5/8”) & 15.9mm (5/8”) Sold as singles
Includes 1x 10-32 button head cap screw bolt and 1 x self tapping screw

uide
Size g e 24
on pag

CUSHIONED P-CLAMPS

BRAKE FITTINGS HOSE & ACCESSORIES

QUICK RELEASE TITANIUM FITTINGS
Blue Black Silver
10 PACKS Part No Description
AF158-03 AF158-03BLK AF158-03S
AF158-04 AF158-04BLK AF158-04S AFQR104-03 Quick Release -3 EPDM Seal Black Titanium (Brake*)
AFQR104-04 Quick Release -4 EPDM Seal Black Titanium (Brake*)
*(NOT for road use Off-road and race use only)
NOT suitable for fuel or oil.

BILLET P - CLAMPS QUICK RELEASE STAINLESS STEEL FITTINGS

To SUIT 4.76mm (3/16”) HARD LINE Part No Description
ID Blue Red Black Silver AFQR105-03 Quick Release -3 EPDM Seal Stainless Steel (Brake*)
*(NOT for road use Off-road and race use only)
4.76mm AF157-03 AF157-03R AF157-03BLK AF157-03S
NOTE: For use in brake applications must use fittings with EPDM seal.
BILLET P - CLAMPS 10 PACKS
To SUIT 4.76mm 3/16” I.D. HARD LINE

Blue Red Black Silver

AF157-03-10 AF157-03R-10 AF157-03BLK-10 Silver
AF157-03S-10
Pack contains 10 clamps

QUICK RELEASE LIGHT WEIGHT TITANIUM FITTINGS

Aeroflow’s Small Diameter Titanium quick release fitting are even lighter and
more compact than before. These super lightweight small diameter fittings
are made from Titanium. They have been tested up to 15000psi and are
fitted with EPDM seals and are a perfect choice for brake*(NOT for road use
Off-road and race use only) application. These fittings are known as “Dry
Breaks” because you can quickly separate a hose containing fluid under
pressure without leaks.
BILLET DUAL HOSE SEPARATORS NOTE: EPDM seals must be used in brake applications.

Blue Red Black Silver Titanium Part No Description

AF156-03 AF156-03R AF156-03BLK AF156-03S AF156-03T AFQR104-03SD Quick Release -3 EPDM Seal Titanium (Brake*)
AF156-04 AF156-04R AF156-04BLK AF156-04S AF156-04T
NOTE: For use in brake applications must use fittings with EPDM seal.

aeroflowperformance.com 83
 BRAKE FITTINGS

QUICK RELEASE BULKHEAD FITTINGS

Quick Release EPDM seal with bulkhead. For use with brake* or clutch S/S INVERTED FLARE UNION
*(NOT for road use Off-road and race use only)
Part No Description
Part No Description
AF372 3/8”- 24 Thread
AFQR103-03BH Aluminium Quick Release with bulkhead AF373 M10 x 1mm Thread
AFQR103-04BH Aluminium Quick Release with bulkhead
AFQR104-03BH Titanium Quick Release with bulkhead
AFQR104-04BH Titanium Quick Release with bulkhead
NOT suitable for fuel or oil.

BRAKE FITTING KIT

This fitting simplifies installation of a line lock, proportioning
AF131-03SS AF131-04-03SS
valve, pressure switch etc by allowing you to tap into existing 4.76mm (3/16”)
brake line. 1/8” NPT brass fitting.
STAINLESS STEEL FEMALE COUPLER
Part No Description
AN Part No
AF375-02 Universal line-lock brake fitting kit
-3 AF131-03SS
-4 AF131-04SS
-4 to -3 AF131-04-03SS
BRAKE FITTINGS HOSE & ACCESSORIES

Sold in pairs

S/S INVERTED FLARE TUBE NUT

Part No Description
AF364 3/8” - 24 to 4.76mm (3/16”) hardline
AF374 7/16” - 20 to 4.76mm (3/16”) hardline S/S HOSE END SOCKETS
AF365 7/16” - 24 to 4.76mm (3/16”) hardline
AF366 M10 x 1.0 to 4.76mm (3/16”) hardline AN Part No
AF371 M10 x 1.25 to 4.76mm (3/16”) hardline
AF367 M12 x 1.0 to 4.76mm (3/16”) hardline -3 AF298-03
AF376 M12 x 1.25 to 4.76mm (3/16”) hardline -4 AF298-04
AF377 M12 x 1.5 to 4.76mm (3/16”) hardline
AF368 1/2” - 20 to 4.76mm (3/16”) hardline
AF369 9/16” - 18 to 4.76mm (3/16”) hardline
AF370 9/16” - 20 to 4.76mm (3/16”) hardline

AN STAINLESS
STEEL TUBE NUTS

Part No Description PTFE HOSE OLIVE INSERTS (5 PACK)

AF818-03-SS 4.76mm (3/16”) hardline to -3. Sold in pairs
Part No Description
AF299-03 Brass Olive insert -3AN
AF299-03D Aluminium Olive insert -3AN
AN STAINLESS STEEL AF299-03SS SS Olive insert -3AN
TUBE SLEEVES AF299-04
AF299-04D
Brass Olive insert -4AN
Aluminium Olive insert -4AN
AF299-04SS SS Olive Insert suit -4AN
Part No Description
AF819-03-SS 4.76mm (3/16) hardline use with AF818-03-SS.
Sold in pairs

S/S 3/16 HARD

LINE TUBE NUT CONCAVE SEAT OLIVE INSERTS (5 PACK)
Part No Description Part No Description
AF390-03 4.76mm (3/16”) hardline to -3 AF299-01 Brass olive insert for concave seat -3AN
Note: Tube sleeve incorporated in nut. Sold in pairs For use with AF232-03 & AF236-03
84 aeroflowperformance.com
 BRAKE FITTINGS

COMMON THREAD CONNECTIONS

s
S t a inles
304 TEEL
S

STRAIGHT S/S HOSE ENDS

Part No Description Angle
AF201-03 -3AN to -3 teflon hose end Straight
AF201-04 -4AN to -4 teflon hose end Straight
AF201-04-03 -4AN to -3 teflon hose end Straight

i n c c oated
Z
STEEL

BRAKE FITTINGS HOSE & ACCESSORIES

45° S/S HOSE ENDS
Part No Description Angle
AF202-03 -3AN to -3 teflon hose end 45°
Zinc coated steel fitting AF202-04-03 -4AN to -3 teflon hose end 45°
AF202-04 -4AN to -4 teflon hose end 45°
STRAIGHT STEEL SWIVEL HOSE ENDS
Part No Description Angle
AF201-03S -3AN to -3 teflon hose end Straight
AF201-04S -4AN to -4 teflon hose end Straight
AF201-06S -6AN to -6 teflon hose end Straight

90° S/S HOSE ENDS

Zinc coated steel fitting Part No Description Angle
45° STEEL SWIVEL HOSE ENDS AF203-03 -3AN to -3 teflon hose end 90°
AF203-04-03 -4AN to -3 teflon hose end 90°
Part No Description Angle AF203-04 -4AN to -4 teflon hose end 90°

AF202-03S -3AN to -3 teflon hose end 45°

AF202-04S -4AN to -4 teflon hose end 45°
AF202-06S -6AN to -6 teflon hose end 45°

Zinc coated steel fitting S/S FEMALE to MALE WITH 1/8 PORT
This handy little adapter is an addition to our 140 series of female to male
adapters with a 1/8” NPT port, perfectly designed to give more clearance and
allow use of a gauge for pressure checking / testing. Applications include:
Brake light switch, Pressure sensors, gauge ports and many more!
90° STEEL HOSE ENDS
AN Part No
Part No Description Angle
-3 AF140-03-SS
AF203-03S -3AN to -3 teflon hose end 90° -4 AF140-04-SS
AF203-04S -4AN to -4 teflon hose end 90°
AF203-06S -6AN to -6 teflon hose end 90°

aeroflowperformance.com 85
 BRAKE FITTINGS

STRAIGHT S/S MALE HOSE END

45° S/S FEMALE COUPLER to FEMALE 1/8 NPT
Part No Description Angle Part No Description
AF132-03SS -3AN to -3 Swivel Nut 45° AF274-03 1/8” NPT to -3 teflon hose
AF132-04SS -4AN to -4 Swivel Nut 45°

WELD-ON LIFESAVER
These weld-on or braze hose ends can be fitted to hardline in order to
connect with 200 & 250 series hose.

90° S/S FEMALE COUPLER Part No Description

AF260-03 fits -3 200 & 250 series hose
Part No Description Angle
AF260-04 fits -4 200 & 250 series hose
AF133-03SS -3AN to -3 Swivel Nut 90°
AF133-04SS -4AN to -4 Swivel Nut 90°
BRAKE FITTINGS HOSE & ACCESSORIES

STRAIGHT S/S MALE HOSE END

Part No Description
AF220-03 3/8”-24 to -3 teflon hose
45° S/S FEMALE to MALE AF221-03 M10 x 1.0mm to -3 teflon hose

Part No Description Angle

AF142-03SS -3AN to -3 Swivel Nut 45°
AF142-04SS -4AN to -4 Swivel Nut 45°

S/S MALE FLARE UNION WITH 1/8” NPT PORT

Part No Description
AF334-03 -3AN Union with 1/8” NPT port
90° S/S FEMALE to MALE AF334-04 -4AN Union with 1/8” NPT port

Part No Description Angle

AF207-03 -3AN to -3 Swivel Nut 90°
AF207-04 -4AN to -4 Swivel Nut 90°

STRAIGHT S/S MALE HOSE END TO S/S FEMALE M10 x 1.0 to MALE 1/8” NPT
FEMALE M10 x 1.0 Designed to suit BOSCH Motorsport pressure and temperature sensors.

Part No Description Angle Part No Description

AF204-03 M10 x 1.0 to -3 teflon hose end Straight AF912-M10-01SS M10 x 1mm to 1/8” NPT

86 aeroflowperformance.com
 BRAKE FITTINGS

S/S MALE FLARE UNION

Part No Description
AF360-03
AF360-04
Male -3 to male -3 short
Male -4 to male -4 short -3 AN 90 DEGREE S/S BULKHEAD
AF360-06 Male -6 to male -6 short
AF360-08 Male -8 to male -8 short Part No Description
AF338-03 Male -3 to male M12 x 1.25
AF323-03 -3AN Stainless 90 Degree Bulkhead
AF323-04 -4AN Stainless 90 Degree Bulkhead

STRAIGHT S/S BULKHEAD

Part No Description
AF320-03 -3AN Stainless Straight Bulkhead
AF320-04 -4AN Stainless Straight Bulkhead

BRAKE FITTINGS HOSE & ACCESSORIES

-3 AN S/S TEE BULKHEAD
Part No Description

-3 AN 45 DEGREE S/S BULKHEAD AF324-03

AF324-04
-3AN Stainless Tee Bulkhead
-4AN Stainless Tee Bulkhead

Part No Description
AF321-03 -3 AN Stainless 45 Degree Bulkhead
AF321-04 -4 AN Stainless 45 Degree Bulkhead

AN S/S TEE
Part No Description
AF327-03 -3AN Stainless Tee
AF327-04 -4AN Stainless Tee

S/S BULKHEAD NUT Sold individually

Part No Description
AF325-03 -3AN Stainless Bulkhead Nut
AF325-04 -4AN Stainless Bulkhead Nut

aeroflowperformance.com 87
 S/S BRAKE FITTINGS

45o FEMALE to MALE 1/8” NPT

S/S TEE BLOCK WITH MOUNT TAB
Part No Description
Part No Description
AF915-02SS Female to male 1/8” NPT S/Steel
AF328-03 -3 teflon ends all sides

90o FEMALE to MALE 1/8” NPT

Part No Description S/S TEE BLOCK WITH MOUNT TAB
AF914-02SS Female to male 1/8” NPT S/Steel Description
Part No
AF328-03-03 -3 teflon end tee with -3AN male on side
BRAKE FITTINGS HOSE & ACCESSORIES

AN S/S 1/8” BSP FEMALE TEE

Part No Description S/S TEE BLOCK WITH MOUNT TAB
AF835-02SS 1/8” BSPT Female Tee with male on side.
Part No Description
AF326-03 -3AN male all sides

AN S/S TEE WITH 1/8” NPT ON SIDE S/S TEE BLOCK

Description Part No Description
Part No
AF329-01 -3AN male with 3/8”- 24 inverted flare on run
AF825-03SS -3AN stainless tee with 1/8” NPT on side.

AN S/S TEE WITH 1/8” NPT ON RUN

S/S FEMALE ROUND TEE BLOCK
Part No Description
Part No Description
AF826-03SS -3AN stainless tee with 1/8” NPT on run.
AF378 3 x 3/8”-24 Convex tee with mount tab

88 aeroflowperformance.com
 S/S BRAKE FITTINGS

S/S 20° & 30° BANJO

Part No Description Angle

S/S INVERTED FEMALE TEE BLOCK AF211-03

AF212-03
10mm (3/8”) banjo to -3 teflon hose end
10mm (3/8”) banjo to -3 teflon hose end
30°
20°
AF216-03 11.2mm (7/16”) banjo to -3 teflon hose end 20°
Part No Description
AF385 3 x 3/8”-24 Inverted seat

S/S 45° BANJO

S/S INVERTED FEMALE
Part No Description Angle
TEE BLOCK 1/8” NPT on SIDE
AF208-03 10mm (3/8”) banjo to -3 teflon hose end 45°
Part No Description AF209-03 11.2mm (7/16”) banjo to -3 teflon hose end 45°

AF386 2 x 3/8”-24 inverted seat , 1 x 1/8”-27 on side

BRAKE FITTINGS HOSE & ACCESSORIES

S/S 90° BANJO
S/S STRAIGHT BANJO (SHORT) Part No Description Angle
Part No Description AF219-03 10mm (3/8”) banjo to -3 teflon hose end 90°
AF219-04 10mm (3/8”) banjo to -4 teflon hose end 90°
AF210-03 10mm (3/8”) banjo to -3 teflon hose AF218-03 11.2mm (7/16”) banjo to -3 teflon hose end 90°
AF213-03 11.2mm (7/16”) banjo to -3 teflon hose AF218-04 11.2mm (7/16”) banjo to -4 teflon hose end 90°

S/S STRAIGHT SHORT BANJO to MALE AN

Part No Description
S/S BANJO WITH DOUBLE ENDS AF310-03 10mm (3/8”) banjo to -3AN male
AF310-04 10mm (3/8”) banjo to -4AN male
Part No Description AF311-03 11.2mm (7/16”) banjo to -3AN male
AF210-03-03 10mm (3/8”) double-ended banjo to -3 teflon hose AF311-04 11.2mm (7/16”) banjo to -4AN male
AF215-03 11.2mm (7/16”) double-ended banjo to -3 teflon hose AF721-03SS 12.7mm (1/2”) banjo to -3AN male
AF330-04 14mm (9/16”) banjo to -4AN male

S/S STRAIGHT LONG BANJO to MALE AN

Part No Description Angle
S/S STRAIGHT BANJO (LONG) AF310-03L 10mm (3/8”) banjo to -3AN male Straight
AF310-04L 10mm (3/8”) banjo to -4AN male Straight
Part No Description Angle AF311-03L 11.2mm (7/16”) banjo to -3AN male Straight
AF311-04L 11.2mm (7/16”) banjo to -4AN male Straight
AF210-03L 10mm (3/8”) banjo to -3 teflon hose end Straight AF314-03 12mm banjo to -3AN male Straight
AF213-03L 11.2mm (7/16”) banjo to -3 teflon hose end Straight AF314-04 12mm banjo to -4AN male Straight
AF720-06SS 14mm banjo to -6AN male Straight

aeroflowperformance.com 89
 S/S BRAKE FITTINGS

S/S 90° BANJO to AN

S/S BANJO SHORT WITH DOUBLE AN Part No Description Angle
Part No Description
AF313-03 10mm (3/8”) banjo to -3AN male 90°
AF310-03-03 10mm (3/8”) double-ended banjo to -3AN AF313-04 10mm (3/8”) banjo to -4AN male 90°
AF310-04-04 10mm (3/8”) double-ended banjo to -4AN AF319-03 11.2mm (7/16”) banjo to -3AN male 90°
AF311-03-03 11.2mm (7/16”) double-ended banjo to -3AN AF319-04 11.2mm (7/16”) banjo to -4AN male 90°
AF311-04-04 11.2mm (7/16”) double-ended banjo to -4AN AF309-03 12mm banjo to -3AN male 90°
AF312-03-03 12mm double-ended banjo to -3AN AF309-04 12mm banjo to -4AN male 90°
AF312-04-04 12mm double-ended banjo to -4AN

Washers NOT included

S/S BANJO BOLTS

S/S BANJO LONG WITH DOUBLE AN
BRAKE FITTINGS HOSE & ACCESSORIES

Part No Description Part No Thread UH Length

AF310-03-03L 10mm (3/8”) double-ended banjo to -3AN AF303-03 1/8” BSPP (parallel) 22.5mm 7/8”
AF311-03-03L 11.2mm (7/16”) double-ended banjo to -3AN AF300-03 3/8” - 24 UNF 20mm 51/64”
AF300-03L 3/8” - 24 UNF 25mm 63/64”
AF300-04 7/16” - 20 UNF 25mm 63/64”
AF300-04L 7/16” - 20 UNF 30mm 1-3/16”
AF303-04 7/16”- 24 20mm 51/64”
AF303-04L 7/16”- 24 25mm 63/64”
AF379-04 1/2”- 20 30mm 1-3/16”
AF301-02 M8 x 1.0mm 20mm 51/64”
AF301-03 M10 x 1.0mm 20mm 51/64”
AF301-03L M10 x 1.0mm 25mm 63/64”
AF302-03 M10 x 1.25mm 20mm 51/64”
AF302-03L M10 x 1.25mm 25mm 63/64”
AF304-03 M10 x 1.5mm 20mm 51/64”
AF315-04 M12 x 1.0mm 30mm 1-3/16”
S/S 20° BANJO to AN AF315-04L M12 x 1.0mm 38mm 1-1/2”
AF316-04 M12 x 1.25mm 30mm 1-3/16”
Part No Description Angle AF317-04 M12 X 1.5mm 30mm 1-3/16”
AF312-03 10mm (3/8”) banjo to -3AN male 20° AF725-06SS M14 X 1.5mm 22mm 7/8”
AF316-03 11.2mm (7/16”) banjo to -3AN male 20°

Washers NOT included

S/S DOUBLE BANJO BOLTS

Part No Description UH Length
S/S 45° BANJO to AN AF305-03 3/8”- 24 31mm 1-7/32”
AF305-03L 3/8”- 24 40mm 1-37/64”
Part No Description Angle AF305-04 7/16”- 20 30mm 1-3/16”
AF305-04L 7/16”- 20 38mm 1-1/2”
AF332-03 10mm (3/8”) banjo to -3AN male 45°
AF318-04 7/16”- 24 30mm 1-3/16”
AF332-04 10mm (3/8”) banjo to -4AN male 45°
AF318-04L 7/16”- 24 38.5mm 1-33/64”
AF335-03 11.2mm (7/16”) banjo to -3AN male 45°
AF306-03 M10 x 1.00mm 30mm 1-3/16”
AF335-04 11.2mm (7/16”) banjo to -4AN male 45°
AF306-03L M10 x 1.00mm 38mm 1-1/2”
AF336-03 12mm banjo to -3AN male 45°
AF306-04L M12 x 1.00mm 38mm 1-1/2”
AF336-04 12mm banjo to -4AN male 45°
AF307-04L M12 x 1.25mm 39mm 1-17/32”
AF307-03 M10 x 1.25mm 30mm 1-3/16”
AF307-03L M10 x 1.25mm 39mm 1-17/32”
AF308-03L M10 x 1.5mm 38mm 1-1/2”
AF308-04L M12 x 1.5mm 38mm 1-1/2”

90 aeroflowperformance.com
 S/S BRAKE FITTINGS

ALUMINIUM WASHERS (10 PACK)

Washer thickness .95mm (1/32”)
S/S FEMALE NPT to AN
Part No I.D. Sizes O.D. Sizes
Part No Description
AF177-03 -3AN 9.52mm 3/8” 16mm 41/64”
AF177-04 -4AN 11.11mm 7/16” 17mm 43/64” AF370-03SS Female 1/8” NPT to Male -3
AF177-05 12.7mm - 1/2” 18.7mm 47/64” AF370-04SS Female 1/8” NPT to Male -4
AF177-07 13.1mm - 33/64” 18.85mm 47/64”
AF177-06 -6AN 14.28mm 9/16” 20mm 51/64”
AF177-09 15.87mm - 5/8” 22.05mm 55/64”
AF177-08 19.3mm - 3/4” 22.25mm 7/8”
AF177-10 -10AN 22.22mm 7/8” 28.4mm 1-1/8”
AF177-12 -12AN 26.98mm 1-1/16” 33.3mm 1-5/16”
AF177-16 -16AN 32.94mm 1-19/64” 39.75mm 1-9/16”
AF177-KIT Aluminium washer -3AN to -20AN
KIT CONTAINS 10 OF EACH SIZE

S/S BSP MALE TO AN

METRIC ALUMINIUM WASHERS (10 PACK) Part No Description
Washer thickness .95mm (1/32”) AF384-03 1/8” BSP to Male -3
AF384-04 1/8” BSP to Male -4

BRAKE FITTINGS HOSE & ACCESSORIES

Part No I.D. Sizes O.D. Sizes AF384-04-03 1/4” BSP to Male -3
AF384-04-04 1/4” BSP to Male -4
AF171-06 6mm 12.15mm
AF171-08 8mm 14.15mm
AF171-10 10mm 15.95mm
AF171-12 12mm 18.15mm
AF171-14 14mm 20.10mm
AF171-16 16mm 22.10mm
AF171-18 18mm 24.20mm
AF171-20 20mm 26.75mm
AF171-22 22mm 30.10mm
AF171-24 24mm 30.20mm
AF171-KIT Aluminium washer M6 to M24
KIT CONTAINS 10 OF EACH SIZE
S/S NPT MALE TO AN
Part No Description
AF380-03-01 1/16” NPT to Male -3
AF380-04-01 1/16” NPT to Male -4
BSPP ALUMINIUM WASHERS (10 PACK) AF380-03 1/8” NPT to Male -3
Parallel thread. Washer thickness .95mm (1/32”) AF380-04 1/8” NPT to Male -4
AF380-04-03 1/4” NPT to Male -3
Part No Thread Size I.D. Sizes O.D. Sizes AF380-04-04 1/4” NPT to Male -4

AF172-01 1/8” 10mm 25/64” 15.55mm 39/64”

AF172-02 1/4” 13.40mm 17/32” 19.1mm 3/4”
AF172-03 3/8” 16.8mm 21/32” 22.7mm 57/64”
AF172-04 1/2” 21.20mm 27/32” 27.05mm 1-1/16”
AF172-05 5/8” 23.2mm 29/32” 29.5mm 1-5/32”
AF172-06 3/4” 26.7mm 1-1/16” 32.7mm 1-9/32”
AF172-KIT Aluminium washer 1/8” to 3/4”
KIT CONTAINS 10 OF EACH SIZE

S/S 45° NPT MALE TO AN

Part No Description
AF382-03 1/8” NPT to Male -3
AF382-04 1/8” NPT to Male -4
1/8” NPT to FEMALE -3 AF382-04-03
AF382-04-04
1/4” NPT
1/4” NPT
to Male -3
to Male -4

Part No Description
AF916-03-02-SS 1/8” NPT to Female -3 stainless steel

aeroflowperformance.com 91
 S/S BRAKE FITTINGS

S/S DUAL SEAT ADAPTER

Part No AN Size
S/S 90° NPT MALE TO AN AF340-03 -3 3/8” - 24
AF340-04 -4 3/8” - 24
Part No Description AF344-03 -3 M10 x 1.0mm
AF351-04 -4 M10 x 1.0mm
AF381-03 1/8” NPT to Male -3 AF345-03 -3 M10 x 1.25mm
AF381-04 1/8” NPT to Male -4 AF346-03-03 -3 M12 x 1.0mm
AF381-04-03 1/4” NPT to Male -3 AF357-03 -3 M12 x 1.0mm
AF381-04-04 1/4” NPT to Male -4 AF357-04 -4 M12 x 1.0mm

AF285-03

S/S INVERTED FLARE ADAPTER

BRAKE FITTINGS HOSE & ACCESSORIES

Part No AN Size
AF340-03 -3 3/8” - 24
AF340-04 -4 3/8” - 24
AF347-03 -3 3/8” - 24 Long
AF341-03 -3 7/16” - 24
AF341-04 -4 7/16” - 24
AF342-03-03 -3 1/2” - 20
AF343-03-03 -3 9/16” - 18
AF348-03-03 -3 9/16” - 20
AF344-03 -3 M10 x 1.0mm AF285-02
AF345-03 -3 M10 x 1.25mm
AF337-03 -3 M10 x 1.5mm
S/S THROUGH FRAME FITTINGS
These fittings simplify the routing of brake lines through the frame for a neater
and safer installation when building street rods, pro-street and race car
chassis. Sold in pairs with 1/8” NPT on one end and -3AN on other
or female M10 x 1.0 washer seal threads on both ends.

Part No Description
AF285-02 60.32mm (2-3/8”) long 2 x M10 x 1.0
Washers NOT included see page 91 for washers.
AF285-03 60.32mm (2-3/8”) long 1/8” NPT to -3AN

S/S WASHER SEAL ADAPTER

Part No AN Size
AF350-03 -3 3/8” - 24
AF350-04 -4 3/8” - 24
AF353-03 -3 7/16” - 20
AF353-04 -4 7/16” - 20 M12 WITH 1/8” NPT PORT
AF355-03 -3 7/16” - 24
AF355-04 -4 7/16” - 24 Part No Description
AF368-03 -3 1/2” - 20
AF339-03 -3 M8 x 1.25mm AF912-M12-01SS M12 x 1.25 pipe reducer to female 1/8” NPT
AF351-03 -3 M10 x 1.0mm AF912-M12-02SS M12 x 1.5 pipe reducer to female 1/8” NPT
AF351-04 -4 M10 x 1.0mm
AF352-03 -3 M10 x 1.25mm
AF352-04 -4 M10 x 1.25mm
AF356-03 -3 M10 x 1.5mm
AF356-04 -4 M10 x 1.5mm
AF357-03 -3 M12 x 1.0mm
AF357-04 -4 M12 x 1.0mm
AF358-03 -3 M12 x 1.25mm
AF358-04
AF359-03
-4
-3
M12 x 1.25mm
M12 x 1.5mm
1/8” BSPP to -3AN (Parallel thread)
AF359-04 -4 M12 x 1.5mm
Part No Description
AF387-03 1/8” BSPP washer seal to -3AN

92 aeroflowperformance.com
 S/S BRAKE FITTINGS

1/8” NPS to -3AN Straight thread

Part No Description
AF354-03 1/8” NPS washer seal to -3AN

110mm
4”

S/S 19mm FEMALE INVERTED FLARE to -3

HOSE END
Part No Description Size
AF230-03 3/8” - 24
63.5mm
AF234-03 19mm Hex with 7/16” - 20
2-1/2””
AF231-03 retainer clip recess M10 x 1.0
AF232-03
AF236-03
M10 x 1.25
M10 x 1.5
BRAKE OR CLUTCH RESERVOIR
AF299-02 Replacement brass olive Aeroflow’s master cylinder remote reservoirs hold 120ml / 4oz and will allow

BRAKE FITTINGS HOSE & ACCESSORIES

you to mount the brake/clutch fluid fill where ever you need to in your already
crowded engine compartment. They are available in polished finish or black
anodised, they are supplied with a male -3AN adapter and the reservoir
features a female 9/16-18 (-6ORB) thread in the base of the reservoir giving
you an option for mounting directly to master cylinder. Also available single
mounting bracket AF66-2046 or dual AF66-2246, both brackets available in
polished or black finish.

Part No Finish Description

19mm FEMALE INVERTED FLARE TO MALE AN AF64-2150

AF64-2150BLK
Polished
Black
63.5mm (2-1/2”) Reservoir
63.5mm (2-1/2”) Reservoir
AF66-2046 Polished 63.5mm (2-1/2”) Single Billet Bracket
Part No AN Description Size AF66-2046BLK Black 63.5mm (2-1/2”) Single Billet Bracket
AF66-2246 Polished 63.5mm (2-1/2”) Dual Billet Bracket
AF270-03 -3 3/8” - 24
AF66-2246BLK Black 63.5mm (2-1/2”) Dual Billet Bracket
AF270-04 -4 19mm Hex with 3/8” - 24
AF271-03 -3 retainer clip recess 7/16” - 24 AF59-4600 Polished Replacement cap, rubber disc & o-rings
AF271-04 -4 7/16” - 24 AF59-4600BLK Black Replacement cap, rubber disc & o-rings
AF272-03 -3 M10 x 1.0mm
AF299-02 Replacement brass olive

AF49-4076

BRAKE C-CLIP (2 Pack)

AF49-4078

Part No Description
AF230-00 Brake retaining C-clip
LAUNCH
CONTROL KIT
Aeroflow’s Launch Control (also known as: Roll/Stage/Brake Control, Line
Lock, Roll Stop and Anti-Roll). Aeroflow’s 12 Volt 2-Port Launch Control is
designed to be installed into the vehicles existing brake system and can be
used on either the front or rear brakes (Not for split or diagonal brakes). In &
out ports are 1/8” NPT. They are intended primarily as brake-locking devices
for Drag Racing and Off Road use.

Part No Description
BRAKE HOSE MOUNTING BRACKET
AF49-4076 Launch control line lock KIT (Includes Solenoid)
AF49-4075 Launch control line lock solenoid ONLY
Part No Description AF49-4077 Button assemby momentry button style RED button
AF49-4078 Button assemby on/off style switch GREEN button
AF230-01 bolt on brake hose mounting bracket 90o 2 Pack

aeroflowperformance.com 93
 BRAKES & ACCESSORIES

-3AN BLEED NIPPLE

BULKHEAD
Aeroflow Performance have released a compact -3AN bleed nipple bulkhead
that is manufactured from 6061-T6 Aluminium and hard anodised black. This
compact bleeder can be used for many brake and clutch applications and can
BRAKE PROPORTIONING VALVE be easily mounted to make bleeding the fluid system a breeze.
Delivers precise pressure metering and strength from a compact Billet design.
Pressure adjustments range from 100-1000 PSI. This adjustment allows you
to fine tune the front to rear braking balance. Valve has 2 x 1/8” NPT female Part No Description
ports and comes with 2 x 1/8”NPT male / 3/8-24” female adapters. AF64-2130 -3AN bleed nipple bulkhead

Part No Description
15mm 19/32”
AF64-3042 Polished
9mm
AF64-3042BLK Black
23/64”
CLUTCH
ADAPTER
Fits most late model vehicles including AF64-2116
VE-VF (GM). Mustang & Porsche
BRAKE FITTINGS HOSE & ACCESSORIES

Part No Description Pack of

AF64-2116 Clutch master cylinder -4AN adapter (x1)

BRAKE RESIDUAL PRESSURE VALVE

Perfect for retaining line pressure in brake lines. Available in 2psi or 10psi
and can be installed inline. 1/8” NPT threads.

Part No Description
AF387-02 Blue 2 PSI Residual Valve
AF387-10 Red 10 PSI Residual Valve
BILLET BOOSTER VALVE
21mm 13/16” hole. Has a built in one way valve.

Part No Description
AF350-00 Polished billet aluminium with -6AN
AF350-00BLK Black anodised billet aluminium with -6AN
AF350-01 Polished billet aluminium with 3/8” barb
AF350-01BLK Black anodised billet aluminium with 3/8” barb

WILWOOD MASTER CYLINDER ADAPTER

These fittings convert the Wilwood master cylinder 11/16”-20 washer seal
outlet to -3AN male nipple. BRAKE VACUUM RESERVOIR TANK
Allows use of Aeroflows remote reservoir AF64-2150
Dimensions: 170mm (6-3/4”)Tall, 125mm (5”) long. Tank has -6ORB threads.
Part No Description
Part No Description
AF740-03S Silver 11/16” -20 washer seal to -3AN
AF740-03BLK Black 11/16” -20 washer seal to -3AN AF77-1018 Polished spun alloy tank with fittings and mounts
AF77-1018BLK Black spun alloy tank with fittings and mounts
94 aeroflowperformance.com
 BRAKES & ACCESSORIES

CHECK VALVE
Part No Description
AF59-1050 9.52mm (3/8”) inline check valve for the brake booster

VACUUM SWITCH

BRAKE FITTINGS HOSE & ACCESSORIES

Part No Description
AF59-1051 Vacuum switch assembly with tee

AF300-101

VACUUM PUMP KIT

Engines with modifications such as aggressive cam profiles commonly have
little to no vacuum, the Aeroflow Vacuum pump ensures that you always have
maximum vacuum available for your brakes so you can always deliver max
stopping assistance, bang for buck safety is never over rated. The twin piston AF300-100
design is what sets Aeroflow’s vacuum pump apart. It gets to vacuum much faster
than single piston vacuum pumps most commonly found in the market. Vacuum
pumps are even more critical when running large multi piston
calipers. Pump can be mounted on any plane to suit your application.
• 50% more vacuum than a diaphragm style pump. GM WILWOOD BRAKE CALIPER ADAPTERS
• 20% less noise and vibration, similar to that of a performance electric fuel pump. For those Holden HQ-WB and LC-UC Torana owners who wish to upgrade
Vacuum pump switch is designed to maintain a constant 17” of Vacuum. This your early Holden brakes while retaining the factory HQ stub axles. Aeroflow
vacuum pump will draw 6 amps on start up and 5 amps while running. A 15 amp Performance has designed these front brake caliper dog bones to suit the
fuse (sold separately) is recommended. Wilwood brake kits. They suit both the 11 inch and 12 inch Wilwood brake kits
Kit includes vacuum pump witth 9.52mm (3/8”) fittings, 900mm (2ft 11-3/8”) of or the billet Dynalite/Dynapro lug mount calipers. New high tensile bolts and
vacuum hose 9.52mm (3/8”) I.D., wiring loom, check valve, clamps, fuse, relay washers/shims are provided for safety and security when installing.
and vacuum pressure sensor.

Description Part No Description

Part No
AF300-100 Suits 11” brake rotor
AF49-1050 Electric Vacuum Pump Kit
AF300-101 Suits 12” brake rotor
AF59-1050 9.52mm (3/8”) inline check valve for the brake booster
AF59-1051 Vacuum switch assembly with tee
aeroflowperformance.com 95
 O.E. REPLACEMENT FILTERS

NOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW CLEANING KIT AF2000-5050

l l A i r & O il Filter PANEL FILTERS

Fu n Guide
A p p l i c a t i o Aeroflow Panel Filters provide excellent filtration and combine durability with

a r t s o n P age 112 performance. Designed for perfect OEM fitment, these 4-layer cotton gauze filters

St
are for the street car and are designed to increase performance. With a simple
drop-in application, it is easy to replace your dirty/restrictive/worn filter with a reus-
able/washable filter that you will never need to change again hence saving you
money and protecting the environment. Try one today and experience the Aeroflow
difference!

Aeroflow Air Filter Warranty

Aeroflow O.E. Replacement Air filters are backed by a million kilometre warranty
when used on paved roads and on vehicles for which they were designed.
If our product ever fails to provide complete satisfaction, Aeroflow will replace it.

What is not covered by our warranty:

Aeroflow products used for racing or competition use or any off-road use, custom
or modified applications, illegal highway use, marine or industrial applications. All
Length Aeroflow filters NOT covered by our million kilometre warranty are warranted against
defective materials or workmanship for one year from the date of purchase (proof of
purchase must be provided).

Thick Incorrect cleaning or wrong application voids warranty:

Aeroflow air filters should be cleaned every 40,000 kms for normal highway use,
more frequently in dusty conditions. Cleaning must be done with Aeroflow cleaning
Width kit only. Use of compressed air, any chemicals for example Petroleum/gasoline,
transmission fluid, motor oil, lightweight oil or diesel fuel used in place of the Aeroflow
cleaning kit will void the warranty. Abused or modified filters in any way will not be
accepted for warranty.
AIR FILTRATION

AF2031-2013 AF2031-2015 AF2031-2105 AF2031-2116

Length: 251mm 9-57/64” Length: 287mm 11-19/64” Length: 214mm 8-27/64” Length: 298mm 11-47/64”
Width: 210mm 8-17/64” Width: 228mm 8-31/32” Width: 208mm 8-17/64” Width: 229mm 9-1/64”
Thick: 44mm 1-47/64” Thick: 34mm 1-21/64” Thick: 52mm 2-1/64” Thick: 26mm 1-1/32”
Suit: Isuzu D-Max, Holden Rodeo Suit: Ford Falcon EB -AUIII Suit: Mitsubishi Lancer, Mirage & Suit: Holden Commodore VT-VZ V6
and Colorado Cross Ref: A491 Outlander & V8
Cross Ref: A1618 Cross Ref: A1311 Cross Ref: A1358

AF2031-2865 AF2031-2918 AF2031-2154 AF2031-2293

Length: 340mm 13-25/64” Length: 243mm 9-9/16” Length: 372mm 14-41/64” Length: 278mm 10-15/16”
Width: 135mm 5-5/16” Width: 243mm 9-9/16” Width: 165mm 6-1/2” Width: 186mm) 7-21/64”
Thick: 30mm 1-3/16” Thick: 26mm 1-1/32” Thick: 27mm 1-1/16” Thick: 35mm 1-3/8”
Suit: Audi, Volkswagen & Skod Suit: Holden Rodeo & Mitsubishi Suit: Subaru Liberty, Impreza, Out- Suit: Mazda 3
Cross Ref: A1711 Triton back & Forester Cross Ref: A1523
Cross Ref: A1512 Cross Ref: A1426

AF2031-2304 AF2031-2387 AF2031-2392 AF2031-2852

Length: 222mm 8-3/4” Length: 320mm 12-1/2” Length: 268mm 10-1/2” Length: 305mm 12”
Width: 218mm 8-37/64” Width: 300mm 11-13/16” Width: 305mm 12” Width: 239mm 9-13-32”
Thick: 33mm 1-1/32” Thick: 26mm 1-1/32” Thick: 54mm 2-1/8” Thick: 29mm 1-3/16”
Suit: Subaru Liberty, Impreza, Out- Suit: Lexus LX570 Suit: 2007-2013 Mitsubishi Lancer & Suit: Ford Falcon BA & BF, Ford
back & Forester Cross Ref: A1784 Outlander Territory
Cross Ref: A1527 Cross Ref: A1622 Cross Ref: A1475 & A1575

96 aeroflowperformance.com
 O.E. REPLACEMENT FILTERS

AF2031-2181 AF2031-2231 AF2031-2276 AF2031-2300

Length: 348mm 13-45/64” Length: 238mm 9-3/8” Length: 341mm 13-27/64” Length: 289mm 11-3/8”
Width: 132mm 5-1/64” Width: 175mm 6-7/8” Width: 148mm 5-53/64” Width: 147mm 5-25/32”
Thick: 30mm 1-1/64” Thick: 27mm 1-1/16” Thick: 27mm 1-1/16” Thick: 27mm 1-1/16”
Suit: All Mercedes Benz Suit: BMW M3, X3, Z3, Z4, 320i, Suit: Honda Accord & Euro Suit: Subaru BRZ, Toyota 86
Cross Ref: A1678 323i, 325i, 330i Cross Ref: A1508 Scion FR-S
Cross Ref: A1413 Cross Ref: A1481

AF2031-2342 AF2031-2360 AF2031-2367 AF2031-2399

Length: 224mm 8-13/16” Length: 244mm 9-39/64” Length: 356mm 14-1/64” Length: 181mm 7-1/8”
Width: 195mm 7-43/64” Width: 176mm 6-59/64” Width: 285mm 11-7/32” Width: 168mm 6-5/8”
Thick: 25.4mm 1” Thick: 25mm 63/64” Thick: 29mm 1-9/64” Thick: 25mm 63/64”
Suit: Honda Civic Suit: Toyota Corolla, Yaris, Suit: BMW Z4, 135i, 335i, 535i Suit: Nissan skyline 350/370 GT,
Cross Ref: A1578 RAV4 Cross Ref: A1787 Nissan 350Z/370Z, Infinity
Cross Ref: A1559 Cross Ref: A1761

AIR FILTRATION
AF2031-2443 AF2031-2451 AF2031-2468 AF2031-2480
Length: 222mm 8-3/4” Length: 259mm 10-3/16” Length: 238mm 9-3/8” Length: 273mm 10-3/4”
Width: 244mm 9-39/64” Width: 162mm 6-3/8” Width: 184mm 7-15/64” Width: 181mm 7-1/8”
Thick: 29mm 1-9/64” Thick: 22mm 55/64” Thick: 27mm 1-1/16” Thick: 30mm 1-3/16”
Suit: Toyota Camery, Kluger, Suit: Kia Sportage, Hyundai i30, Suit: Honda Civic Suit: Mazda3, Mazda 6, CX5
Lexus, NX/RX models Elantra, Tucson Cross Ref: A1815 Cross Ref: A1785
Cross Ref: A1838 Cross Ref: A1727

AF2031-2857 AF2031-2888 AF2031-2990 AF2031-2950

Length: 387mm 15-15/64” Length: 400mm 15-47/64” Length: 225mm 8-55/64” Length: 305mm 12”
Width: 186mm 9-39/64” Width: 170mm 6-11/16” Width: 202mm 7-61/64” Width: 241mm 9-31/64”
Thick: 30mm 1-3/16” Thick: 30mm 1-3/16” Thick: 32mm 1-1/4” Thick: 28mm 1-7/64”
Suit: Porsche Cayenne, Suit: Audi A3, S3, TT, VW Golf, Suit: BMW Series 1 to Series 4 Suit: Ford Falcon FG, FG II & FG -X
VW Touareg, Audi Q7 Passat. Cross Ref: A1850 2008-on
Cross Ref: A1716 Cross Ref: A1640 Cross Ref: A1582

AF2031-2951 AF2031-2031 AF2031-2080 AF2031-2980

Length: 243mm 9-9/16” Length: 270mm 10-5/8”
Length: 282.6mm 11-1/8” Length: 283mm 11-9/64”
Width: 239mm 9-13/32” Width: 188mm 7-13/32”
Width: 168.3mm 6-5/8” Width: 184mm 7-1/4”
Thick: 34.5mm 1-23/64” Thick: 36mm 1-27/64”
Thick: 26.9mm 1-1/16” Thick: 29mm 1-9/64
Suit: Mitsubishi Triton 2.5 Diesel Suit: Nissan Navara D40 2006-on &
Suit: Holden Commodore VL 3.0, Suit: Saab, Nissan Navara, Calibra
2008-on Hyundai Iload & Imax
VN-VS, Nissan Skyline Cross Ref: A483 & A1598
Cross Ref: A1512 Cross Ref: A1758 & A1730
Cross Ref: A360

aeroflowperformance.com 97
 O.E. REPLACEMENT FILTERS

AF2031-2919 Width 1
Angle1
AF2031-2281 Width 1 Angle1
Length 2
Thick
Length 1: 355mm 13-63/64” Length: 355mm 13-63/64”
Length 2: 170mm 6-45/64” Thick Width 1: 109mm 4-19/64”
Width 1: 150mm 5-29/32” Width 2: 176mm 6-59/64”
Width 2
Width 2: 240mm 9-7/16” Angle: 360mm 14-11/64” Length1
Angle: 175mm 6-57/64” Length1
Width 2 Thick: 34mm 1-21/64”
Thick: 22mm 7/8” Suit: Toyota Hilux 4.0L V6,
Suit: Holden Commodore VE & VF & Prado 4.0L V6 120 series
HSV 2006-on Cross Ref: A1525
Cross Ref: A1557

AF2031-2146 AF2031-2995 AF2041-2993

AF2031-3024
O.D. 159mm 6-1/4”
Length: 270mm 10-5/8” Length: 199mm 7-27/32”
Length: 251mm 9-57/64” I.D. 70mm 2-3/4”
Width: 188mm 7-13/32” Width: 163mm 6-13/32”
Width: 202mm 7-61/64” Height 210mm 8-1/4”
Thick: 36mm 1-27/64” Thick: 27mm 1-1/16”
Thick: 35mm 1-3/8” Suits: Ford Focus,
Suit: Toyota Prado 120, 150, 155 Suit: Ford Fiesta, B-Max,
Suit: Mazda CX5, CX9, Volvo C30, S40, V50
2.7L, 3L & Landcruiser V8 4.5 diesel Eco-sport
Mazda 3, Mazda 6 Cross Ref: A1630
Cross Ref: A1522 Cross Ref: A1875
Cross Ref: A1408

O.E. REPLACEMENT
REUSABLE /
WASHABLE COTTON
FILTER ELEMENTS
AF2041-2023
AF2041-2296 AF2041-2443
Oil Filter
Full Air & n Guide O.D. 166mm 6-17/32”
AIR FILTRATION

O.D. 218mm 9” O.D. 175mm 6-57/64”

Applicatio age 112
I.D. 83mm ` 3.17/64”
I.D. 110mm 4-21/64” I.D. 110mm 4-21/64” Height 150mm 5-29/32”
P
Starts on
Height 171mm 6-47/64” Height 146mm 5-3/4” Suits: Round Filter - Rodeo, Jackeroo
Suits: Toyota Hilux 2.7L, 3.0L, Ford Suits: Toyota Landcruiser 3.0L Turbo Diesel
Ranger & Mazda BT50 2.5L Cross Ref: A328 & A340 Cross Ref: A1504
Cross Ref: A1541

AF2041-0662 AF2041-2444 AF2041-2233 AF2041-2015

O.D. 221mm 8-45/64” O.D. 190mm 7-31/64” O.D. 190mm 7-31/64” O.D. 200mm 7-7/8”
I.D. 135mm 5-5/16” I.D. 108mm 4-1/4” I.D. 74mm 2-29/32” I.D. 113mm 4-29/64”
Height 138mm 5-7/16” Height 135mm 5-5/16” Height 131mm 5-5/32” Height 124mm 4-57/64”
Suits: Ford Ranger & BT50 Air Filter Suits: Toyota Landcruiser 100 & Suits: Round Filter - Toyota Hilux Suits: Round Filter Toyota Hilux
09/11-15, 2.2-2.5-3.2L Prado VZ95 Prado 3.4L 3.0L 5L Dies 11/97-08/99
Cross Ref: A1784 Cross Ref: A1407 & A1350 Cross Ref: A1397 Cross Ref: A1402

AF2041-2020
AF2041-0945 AF2041-1993 AF2041-9267
Base O.D. 145mm 5-45/64”
O.D. 205mm 8-5/64” Base O.D. 196mm 7-23/32 ” O.D. 162mm 6-3/8” Base I.D. 73mm 2-7/8”
I.D. 111mm 4-3/8” Base I.D. 145mm 5- 45/64” I.D. 94mm 3-45/64” Top I.D. 73mm 2-7/8”
Height 193mm 7-19/32” Height 76mm 3” Height 140mm 5-33/64” Height 234mm 9-7/32”
Suits: Ford Falcon BA & BF V8 5.4L Suits: Ford FG 5.0L V8 Boss 315 Suits: Nissan Navara D22 2.5L & Suits: Nissan Navara D22 2.5L &
2003-08-on & 335 3.0L 3.0L
Cross Ref: A1492 Cross Ref: FA-1896 Cross Ref: A1412 Cross Ref: A1495

NOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW CLEANING KIT AF2000-5050
98 aeroflowperformance.com
 INTAKE SYSTEMS & PODS

UNIVERSAL CLOSED COLD INTAKE SYSTEM

This universal closed cold air intake system is genuine carbon fibre it has a
removable and washable 4 layer cotton element. Suitable for forced induction,
naturally aspirated, 4x4, off-road, street and racing applications. It comes in two
different air box lengths 152.4mm (6”) and 203.2mm (8”).
152.4mm (6”) Air box filter dimentions: 133mm (5-1/4”) long, 150mm (5-7/8”) wide
203.2mm (8”) Air box filter dimentions: 160mm (6-5/8”) long, 150mm (5-7/8”) wide

Part No Description
AF2341-3000 Universal Intake system with 152.4mm (6”) air box length
AF2341-3001 Universal Intake system with 203.2mm (8”) air box length
Washable 4 layer cotton
inverted pod filter located
AF2341-3001
inside carbon housing.
Flexible intake tube
is 77mm (3”)ID and
1m long

AF2341-3000

AIR FILTRATION
VF LSA COLD INTAKE SYSTEM MUSTANG COLD INTAKE SYSTEM
The Aeroflow Performance cold air intake system features a large diameter The Aeroflow Performance cold air intake kit replaces the restrictive stock
free flowing intake path to ensure maximum performance from your LSA air intake on your 2015 to 2017 V8 Ford Mustang. This bolt-on kit includes a
powered vehicle. This cold air intake kit is a high performance air box aeroflow performance pod filter with clamp which is washable and reusable,
designed as a direct fit for all VF GEN-F LSA 6.2. Our kit contains a large new air box/tray with installed foam hood seal, a new intake tube which
aeroflow performance pod filter to assist in minimizing the restriction of accommodates the factory mass air sensor, idle bypass hose, EVAP vent
air flow and is contained in a fabricated housing which seals against the hose and crank case vent hose and all required mounting hardware. The kit
underside of the vehicles bonnet to reduce the intake of hot air from inside utilises all factory emissions and vacuum lines. Factory mounting locations
the engine bay. It is designed for easy installation with OEM fitment. and hardware are utilized to allow for quick and easy installation.

Part No Description Part No Description

AF2341-1001 Fits all VF GEN-F LSA 6.2 AF2341-1000 2015 -2017 Mustang intake kit

aeroflowperformance.com 99
 POD FILTERS

POD FILTERS
Aeroflow Pod filters are manufactured from a high temp Polyurethane
material. Featuring an aesthetic 4-layer cotton black design, these are
perfect for any aftermarket applications. With increased air flow, these
Aeroflow Pod Filters are designed to increase performance. These
filters are reusable/washable, hence saving you money and protecting
the environment. We have the newest technologies in air filter
manufacturing that allows us to provide you with what we feel is the
highest quality filter at a great price. Get an Aeroflow Pod Filter today
and experience the Aeroflow difference!

UNIVERSAL STEEL TOP POD FILTERS

AF2711-1009 AF2811-1009 AF2711-3003 AF2811-3003

Universal Inverted Tapered Universal Inverted Tapered Universal Inverted Tapered with Universal Inverted Tapered with
with Black End. 152mm (6”) flange. with Chrome End. 152mm (6”) flange. Black End. 76mm (3”) flange. Chrome End. 76mm (3”) flange.
101.6 mm (4”) High x 101.6 mm (4”) High x 127mm (5”) High 127mm (5”) High
193 mm (7.6”) Base OD x 193 mm (7.6”) Base OD x 152mm (6”) Base O.D. 152mm (6”) Base O.D.
119 mm (4.7”) Top OD 119 mm (4.7”) Top OD 133mm (5-1/4”) Top OD 133mm (5-1/4”) Top OD
AIR FILTRATION

AF2811-5288 AF2711-9500 AF2811-9500

AF2711-5288
Universal Inverted Tapered with Universal Inverted Tapered with
Universal Inverted Tapered with Universal Inverted Tapered with Black End. 101.6mm (4”) flange. Chrome End. 101.6mm (4”) flange.
Black End. 76mm (3”) flange. Chrome End. 76mm (3”) flange. 65mm (2-1/4”) High 65mm (2-1/4”) High
65mm (2-1/4”) High 65mm (2-1/4”) High 152mm (6”) Base O.D. 152mm (6”) Base O.D.
152mm (6”) Base O.D. 152mm (6”) Base O.D. 133mm (5-1/4”) Top OD 133mm (5-1/4”) Top OD
133mm (5-1/4”) Top OD 133mm (5-1/4”) Top OD

AF2711-2800 AF2811-2800 AF2711-1044 AF2811-1044

Universal Inverted Tapered with Universal Inverted Tapered with Universal Inverted Tapered with Universal Inverted Tapered with
Black End. 127mm (5”) flange. Chrome End. 127mm (5”) flange. Black End. 152mm (6”) flange. Chrome End. 152mm (6”) flange.
152mm (6”) High 152mm (6”) High 203mm (8”) High 203mm (8”) High
165mm (6-31/64”) Base O.D. 165mm (6-31/64”) Base O.D. 190.5mm (7-1/2”) Base O.D. 190.5mm (7-1/2”) Base O.D.
120mm (4-23/32”) Top OD 120mm (4-23/32”) Top OD 121mm (4-3/4”) Top OD 121mm (4-3/4”) Top OD

UNIVERSAL CARBON FIBRE TOP POD FILTERS

AF2911-1009 AF2911-3003 AF2911-4000

Universal Tapered with Carbon Fibre End Universal Inverted Tapered with Universal Inverted Tapered with
152mm (6”) flange. Carbon Fibre End. 76mm (3”) flange. Carbon Fibre End. 101.6mm (4”) flange.
101.6 mm (4”) High x 127mm (5”) High 127mm (5”) High
193 mm (7.6”) Base OD x 152mm (6”) Base O.D. 152mm (6”) Base O.D.
119 mm (4.7”) Top OD 133mm (5-1/4”) Top OD 133mm (5-1/4”) Top OD

100 aeroflowperformance.com
 POD FILTERS

UNIVERSAL POLYURETHANE POD FILTERS (Clamp On)

AF2711-4450 AF2711-5100 AF2711-2590 AF2711-5174

Universal Tapered with Black End Universal Tapered with Black End Universal Tapered with Black End Universal Tapered with Black End
63.5mm (2-1/2”) flange. 76.2mm (3-1/8”) flange. 101.6mm (4”) flange. 70mm (2-3/4”) flange.
130mm (5-7/64”)High x 185mm (7-5/16”)High x 130mm (5-7/64”) High x 130mm (5-7/64”) High x
149.8mm (5-29/32”) Base OD x 150mm (5-29/32”) Base OD x 150mm (5-29/32”) Base OD x 144mm (5-45/64”) Base OD x
117mm (4-39/64”) Top OD 114mm (4-1/2”) Top OD 117mm (4-39/64”) Top OD 117mm (4-39/64”) Top OD

NOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW CLEANING KIT AF2000-5050

AF2711-1760 AF2711-0930 AF2711-0910 AF2711-0810

62mm (2-7/16”) Flange. 76mm (3” ) Flange 76mm (3”) Flange. 76mm (3”) Flange.
127 mm) (5”) High x 155 mm (6”) High x 190 mm (7.5”) High x 226 mm (8.9”) High x
95 mm ( 3-3/4” ) Outside Dia, 152 mm (6”) Base OD x 152 mm (6”) Base OD x 156 mm (6.15”) Base OD x
20o angled flange. 117 mm (4-”) Top OD 117 mm (4.6”) Top OD 117 mm (4.6”) Top OD

AIR FILTRATION
AF2711-0950 AF2711-0920 AF2711-2510 AF2711-5163
89mm (3-1/2”) flange. 89mm (3-1/2”) flange. 101.6mm (4”) flange. 127mm (5”) flange.
155 mm (6.1”) High x 229 mm (9.1”) High x 89 mm (3.5”) High x 105 mm (4.15” ) High x
155 mm (6.1”) Base OD x 155 mm (6.1”) Base OD x 150 mm (5.9”) Base OD x 165 mm (6.5”) Base OD x
117 mm (4.6”) Top OD 117 mm (4.6”) Top OD 117 mm (4.6”) Top OD 117 mm (4.6” ) Top OD

AF2711-3100
AF2711-2520 AF2711-1015 AF2711-0870
152mm (6”) flange.
101.6mm (4”) flange. 101.6mm (4”) flange. 101.6mm (4”) flange. 155 mm (6.1”) High x
129 mm (5.1”) High x 185 mm (7.3”) High x 226 mm (8.9”) High x 197 mm (7.75”) Base OD x
150mm (5.9”) Base OD x 150 mm (5.9”) Base OD x 152 mm (6”) Base OD x 117 mm (4.6”) Top OD
117 mm (4.6”) Top OD 117 mm (4.6”) Top OD 117 mm (4.6”) Top OD

UNIVERSAL STAINLESS STEEL POD FILTERS

AF2215-3000 AF2815-3000 AF2215-4000 AF2815-4000

Round 76mm (3”) Inverted Tapered Round 76mm (3”) flange Inverted Round 101.6mm (4”) Inverted Round 101.6mm (4”) flange Inverted
Stainless Steel Mesh Air Filter Tapered Stainless Steel Mesh Air Tapered Stainless Steel Mesh Tapered Stainless Steel Mesh Air
Element with Black Ends Filter Element with Chrome Ends Air Filter Element with Black Ends Filter Element with Chrome Ends
133mm (5-1/4”) to 152mm (6”) O.D. 133mm (5-1/4”) to 152mm (6”) O.D. 133mm (5-1/4”) to 152mm (6”) O.D. 133mm (5-1/4” ) to 152mm (6”) O.D.
x 127mm (5”) high x 127mm (5”) high x 127mm (5”) high x 127mm (5”) high

aeroflowperformance.com 101
 AIR FILTERS

NOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW CLEANING KIT AF2000-5050

AEROFLOW AIR FILTERS

Stand out from the crowd with a magnificent looking Aeroflow air cleaner.
These air cleaners are stamped from high quality steel. Available in many different great finishes
and styles for that custom look you are after. Chrome-plated or black finish with reusable/washable
or paper elements.
Aeroflow’s air filter assemblies work with all popular standard 4150 (5-1/8” / 130mm) carburettors
and 4500 Dominator (7-5/16” /186mm) carburettors. The 14” (355.60mm) air filter assemblies come
with a drop base that sits 1-1/8” (28mm) below the carburettor.

AIR FILTER ASSEMBLIES

AF2251-3040 AF2851-3040
355.6mm X 76.2mm (14” X 3” ) 355.6mm X 76.2mm (14” X 3” )
Black Full Flow Assembly 28mm Chrome Full Flow Assembly 28mm
28mm (1-1/8”) Drop base 130mm (1-1/8”) Drop base 130mm (5-1/8)
(5-1/8”) neck with black reusable/ neck with black reusable/washable
washable element. element.
Replacement element AF2041-1650 Replacement element AF2041-1650
115mm (4-33/64”) total height. 115mm (4-33/64”) total height.
AIR FILTRATION

AF2251-3150 AF2851-3150 AF2251-1290 AF2851-1290

228.6mm x 7mm (9” x 2-3/4”) 228.6mm x 7mm (9” x 2-3/4”)
355.6mm x 101.6mm (14” X 4”) 355.6mm x 101.6mm (14” X 4” )
Black Full Flow Assembly 130mm Chrome Full Flow Assembly 130mm
Black Air Cleaner Assembly 28mm Chrome Air Cleaner Assembly 28mm
(5-1/8”) neck with black reusable/ (5-1/8”) neck with black reusable/
(1-1/8”) Drop base 130mm (5-1/8”) (1-1/8”) Drop base 130mm (5-1/8”)
washable element washable element
neck with black reusable/washable neck with black reusable/washable
Replacement element AF2041-3530 Replacement element AF2041-3530
element. element.
106mm (4-11/64”) total height. 106mm (4-11/64”) total height.
Replacement element AF2041-3750 Replacement element AF2041-3750
122mm (4-51/64”) total height. 122mm (4-51/64”) total height.

AF2251-1280 AF2851-1280 AF2251-1120 AF2851-1120

355.6mm x 76.2mm (14” X 3”) Black 355.6mm x 76.2mm (14” X 3”) 228.6mm x 7mm (9” x 2-3/4”) 228.6mm x 7mm (9” x 2-3/4”)
Air Cleaner Assembly 28mm (1-1/8”) Chrome Air Cleaner Assembly 28mm Black Air Cleaner Assembly 130mm Chrome Air Cleaner Assembly
Drop base 130mm (5-1/8) (1-1/8”) Drop base 130mm (5-1/8”) (5-1/8” ) neck with black reusable/ 130mm (5-1/8”) neck with black
neck with black reusable/washable neck with black reusable/washable washable element. reusable/
element. element. Replacement element AF2041-3530 washable element.
Replacement element AF2041-1650 Replacement element AF2041-1650 92mm (3-5/8”) total height. Replacement element AF2041-3530
95mm (3-47/64”) total height. 95mm (3-47/64”) total height. 92mm (3-5/8”) total height.

AF2251-1110 AF2851-1110 AF2251-1365 AF2851-1365

228.6mm x 50.8mm (9” x 2” ) 228.6mm x 50.8mm (9” x 2”) 228.6mm x 127mm (9” x 5” ) Black 228.6mm x 127mm (9” x 5” ) Chrome
Black Air Cleaner Assembly 130mm Chrome Air Cleaner Assembly Full Flow Assembly 130mm (5-1/8” ) Full Flow Assembly 130mm (5-1/8” )
(5-1/8”) neck with black reusable/ 130mm (5-1/8” ) neck with black neck with black reusable/washable neck with black reusable/washable
washable element. reusable/washable element. element element
Replacement element AF2041-3527 Replacement element AF2041-3527 Replacement element AF2041-3650 Replacement element AF2041-3650
85mm (3-11/32”) total height. 85mm (3-11/32”) total height. 153mm (6-1/32”) total height. 153mm (6-1/32”) total height.

102 aeroflowperformance.com
 AIR FILTERS

AF2256-1280 AF2856-1280 AF2251-3981 AF2851-3981

355.6mm x 76.2mm (14” X 3”) 355.6mm x 76.2mm (14” X 3”) 161.4mm x 101.6mm (6-3/8” x 4”) 161.4mm x 101.6mm (6-3/8” x 4”)
Black Air Cleaner Assembly 28mm Chrome Air Cleaner Assembly 28mm Black Air Cleaner Assembly 130mm Chrome Air Cleaner Assembly
(1-1/8”) Drop base 130mm (5-1/8”) (1-1/8”) Drop base 130mm (5-1/8”) (5-1/8”) neck with black reusable/ 130mm (5-1/8”) neck with black
neck with paper element. neck with paper element. washable element. reusable/washable element.
Replacement element AF2046-2110 Replacement element AF2046-2110 Replacement element AF2041-2116 Replacement element AF2041-2116
95mm (3-47/64”) total height. 95mm (3-47/64”) total height. 90.5mm (3-9/16”) total height. 90.5mm (3-9/16”) total height.

AF2251-1331 AF2851-1331
161.4mm x 63.8mm (6-3/8” x 2-1/2”) 161.4mm x 63.8mm (6-3/8” x 2-1/2”)
Black Air Cleaner Assembly 130mm Chrome Air Cleaner Assembly
(5-1/8”) neck with black reusable/ 130mm (5-1/8”) neck with black
washable element. reusable/washable element.
Replacement element AF2041-2116 Replacement element AF2041-2116
90.5mm (3-9/16”) total height. 90.5mm (3-9/16”) total height.

AF2256-1110 AF2856-1110 AF2256-1331 AF2856-1331

AIR FILTRATION
228.6mm x 50.8mm (9” x 2” ) Black 228.6mm x 50.8mm (9” x 2” ) Chrome 161.4mm x 63.8mm (6-3/8” x 2-1/2” ) 161.4mm x 63.8mm (6-3/8” x 2-1/2”)
Air Cleaner Assembly 130mm Air Cleaner Assembly 130mm (5-1/8”) Black Air Cleaner Assembly 130mm Chrome Air Cleaner Assembly 130mm
(5-1/8”) neck with paper element neck with paper element (5-1/8”) neck with paper element (5-1/8”) neck with paper element
Replacement element AF2046-2117 Replacement element AF2046-2117 Replacement element AF2046-2116 Replacement element AF2046-2116
85mm (3-11/32”) total height. 85mm (3-11/32”) total height. 90.5mm (3-9/16”) total height. 90.5mm (3-9/16”) total height.

AEROFLOW AIR FILTERS TO SUIT DOMINATOR CARBURETTORS

AF2251-3080 AF2851-3080 AF2251-3155 AF2851-3155

355.6mm X 101.6mm (14” X 4” ) 355.6mm X 101.6mm (14” X 4” ) 228.6mm x 127mm (9” x 5”) 228.6mm x 127mm (9” x 5”)
Black Full Flow Assembly. Chrome Full Flow Assembly. Black Full Flow Assembly. Chrome Full Flow Assembly.
7-5/16 neck with black 7-5/16 neck with black 7-5/16 neck with black 7-5/16 neck with black
reusable/washable element. reusable/washable element. reusable/washable element. reusable/washable element.
Replacement element AF2041-3750 Replacement element AF2041-3750 Replacement element AF2041-3650 Replacement element AF2041-3650
156mm (6-9/64”) total height 156mm (6-9/64”) total height 134mm (5-17/64”) total height 134mm (5-17/64”) total height

AF2251-3079 AF2851-3079 AF2251-3154 AF2851-3154

355.6mm X 76.2mm (14” X 3” ) 355.6mm X 76.2mm (14” X 3” ) 228.6mm x 101.6mm (9” x 4”) 228.6mm x 101.6mm (9” x 4”)
Black Full Flow Assembly. Chrome Full Flow Assembly. Black Full Flow Assembly. Chrome Full Flow Assembly.
7-5/16 neck with black 7-5/16 neck with black 7-5/16 neck with black 7-5/16 neck with black
reusable/washable element. reusable/washable element. reusable/washable element. reusable/washable element.
Replacement element AF2041-1650 Replacement element AF2041-1650 Replacement element AF2041-3640 Replacement element AF2041-3640
115mm (4-33/64”) total height. 115mm (4-33/64”) total height. 161mm (6-21/64”) total height 161mm (6-21/64”) total height
aeroflowperformance.com 103
 AIR FILTERS

AF2251-1235 AF2851-1235 AF2251-1234 AF2851-1234

355.6mm x 101.6mm (14” X 4”) 355.6mm x 101.6mm (14” X 4” ) 355.6mm x 76.2mm (14” X 3”) Black 355.6mm x 76.2mm (14” X 3”)
Black Air Cleaner Assembly Chrome Air Cleaner Assembly.7-5/16 Air Cleaner Assembly. Chrome Air Cleaner Assembly.
7-5/16 neck with black neck with black 7-5/16 neck with black 7-5/16 neck with black
reusable/washable element. reusable/washable element. reusable/washable element. reusable/washable element.
Replacement element AF2041-3750 Replacement element AF2041-3750 Replacement element AF2041-1650 Replacement element AF2041-1650
122mm (4-51/64”) total height. 122mm (4-51/64”) total height. 95mm (3-47/64”) total height. 95mm (3-47/64”) total height.

AF2251-1366 AF2851-1366 AF2251-1364 AF2851-1364

228.6mm x 127mm (9” x 5”) 228.6mm x 127mm (9” x 5”) 228.6mm x 101.6mm (9” x 4”) 228.6mm x 101.6mm (9” x 4”)
Black Air Cleaner Assembly. Chrome Air Cleaner Assembly. Black Air Cleaner Assembly. Chrome Air Cleaner Assembly.
7-5/16 neck with black 7-5/16 neck with black 7-5/16 neck with black 7-5/16 neck with black
reusable/washable element. reusable/washable element. reusable/washable element. reusable/washable element.
Replacement element AF2041-3650 Replacement element AF2041-3650 Replacement element AF2041-3640 Replacement element AF2041-3640
153mm (6-1/32”) total height. 153mm (6-1/32”) total height. 127.6mm (5-1/64”) total height. 127.6mm (5-1/64”) total height.

ROUND FILTER TOPS

AIR FILTRATION

AF2251-1401 AF2851-1401 AF2251-0901 AF2851-0901

355.6mm (14”) Black Full Flow Lid Top 355.6mm (14”) Chrome Full Flow Lid 228.6mm (9”) Black Full Flow Lid Top 228.6mm (9”) Chrome Full Flow Lid
with black reusable/washable media. Top with black reusable/washable with black reusable/washable media. Top with black reusable/washable
media. media.

AF2251-1422 AF2851-1422 AF2251-0922 AF2851-0922

355.6mm (14”) Black air cleaner lid. 355.6mm (14”) Chrome air cleaner lid. 228.6mm (9”) Black air cleaner Lid. 228.6mm (9”) Chrome air cleaner Lid.

104 aeroflowperformance.com
 AIR FILTERS

ROUND FILTER BASES

AF2251-1411
AF2851-0900
355.6mm (14”)
228.6mm (9”) Chrome AF2251-1400 28mm (1-1/8”) Recessed Base
5-1/8” air cleaner base. Black 5-1/8”
355.6mm (14”)
Black 5-1/8” Flat Base

AF2251-0900 AF2851-1411
AF2851-1400
355.6mm (14”)
228.6mm (9”) Black 355.6mm (14”) 28mm (1-1/8”) Recessed Base
5-1/8” air cleaner base. Chrome 5-1/8” Flat Base. Chrome 5-1/8”

AF2251-0955 AF2851-0955 AF2251-1455 AF2851-1455

228.6mm (9”) Black 228.6mm (9”) Chrome 355.6mm (14”) 355.6mm (14”)
Black 7-5/16” Flat Base Black 7-5/16” Flat Base Black 7-5/16” Flat Base Chrome 7-5/16” Flat Base.
Suits Dominator carburettors Suits Dominator carburettors Suits Dominator carburettors Suits Dominator carburettors

AIR FILTRATION
REPLACEMENT REUSABLE / WASHABLE ROUND COTTON FILTER ELEMENTS & PAPER ELEMENTS

AF2041-3760 AF2041-3750 AF2041-1650 AF2041-3740

O.D. 355.6mm 14” O.D. 355.6mm 14” O.D. 355.6mm 14” O.D. 355.6mm 14”
I.D. 309mm 12-11/64” I.D. 310mm 12-13/64” I.D. 310mm 12-13/64” I.D. 128mm 5-1/32”
Height 127mm 5” Height 101.6mm 4” Height 76mm 3” Height 57mm 2-1/4”
Suits: 355.6mm (14”) Filter assembly Suits: 355.6mm (14”) Filter assembly Suits: 355.6mm (14”) Filter assembly Suits: 355.6mm (14”) Filter assembly

AF2041-3530 AF2041-3527
AF2041-3650 AF2041-3640
O.D. 228.6mm 9” O.D. 228.6mm 9”
O.D. 228.6mm 9” O.D. 228.6mm 9” I.D. 192.5mm 7-37/64” I.D. 192.5mm 7-37/64”
I.D. 193mm 7-19/32” I.D. 192.5mm 7-37/64” Height 70mm 2-3/4” Height 50.8mm 2”
Height 127mm 5” Height 101.6mm 4” Suits: 228.6mm (9”) Filter assembly Suits: 228.6mm (9”) Filter assembly
Suits: 228.6mm (9”) Filter assembly Suits: 228.6mm (9”) Filter assembly

AF2041-3981 AF2041-2116
O.D. 162mm 6-3/8” O.D. 162mm 6-3/8”
I.D. 133mm 2-15/64” I.D. 133mm 2-15/64”
Height 101.6mm 4” Height 63.5mm 2-1/2”
Suits: 162mm (6-3/8”) Filter assembly Suits: 162mm (6-3/8”) Filter assembly

aeroflowperformance.com 105
 AIR FILTERS & ACCESSORIES

AF2046-2116 AF2046-2117
AF2046-2110
O.D. 162mm 6-3/8” O.D. 228mm 9”
I.D. 133mm 2-15/64” I.D. 195mm 7-43/64” O.D. 355.6mm 14”
Height 63.5mm 2-1/2” Height 50.8mm 2” I.D. 300mm 11-13/16”
Suits: 162mm (6-3/8”) Filter assembly Suits: 228mm (9”) Filter assembly Height 76mm 3”
Suits: 355.6mm (14”) Filter assembly

AIR CLEANER
SPACERS
Aeroflow’s air cleaner spacers
allow for additional clearance
between carb and air cleaner.
Spacers are intended to fit 2 and 4 Barrel carburettors with LOW PROFILE AIR CLEANER NUTS
130mm (5-1/8”) diameter neck. Billet low profile air cleaner nut perfect for tight clearance applications. Two
thread sizes in black or polished aluminium finish. 7mm (9/32”) total height.
Part No Description
AF2049-1001 12.7mm (1/2”) Air Cleaner spacer.
AF2049-1002 25.4mm (1”) Air Cleaner spacer.
Thread Black Polished
AF2049-1000 38.1mm (1-1/2”) Air Cleaner spacer. 1/4” UNC AF55-1002BLK AF55-1002
AF2049-1003 50.8mm (2”) Air Cleaner spacer. 5/16” UNC AF55-1003BLK AF55-1003

AIR CLEANER ACCESSORIES

Aeroflow’s PCV air cleaner
smog kit is intended to adapt
a factory PCV system to a
custom air cleaner assembly. TALL AIR CLEANER NUTS
AIR FILTRATION

Aeroflow’s smog fitting kit

includes gasket and installation AF2000-1000 Billet tall profile air cleaner nuts perfect for standard clearance applications. Two
hardware. thread sizes in black or polished aluminium finish. 12mm (15/32”) total height.
AF2049-1004
Thread Black Polished
Part No Description
1/4” UNC AF55-1005BLK AF55-1005
AF2000-1000 Rubber base gasket suits 130mm (5-1/8”) neck size carbs 5/16” UNC AF55-1006BLK AF55-1006
AF2049-1004 Universal air cleaner engine breather adapter (smog kit)

AF55-1000

AF55-1007

AIR CLEANER STUD (140mm 5.5” long)

Part No Description
AF55-1000 Carby stud with dual thread 1/4” & 5/16”
AF55-1007 5/16” to 1/4” Carby stud reducer

BREATHERS with S/STEEL ELEMENT

40 micron stainless steel element with an aluminium top and bottom plate.

Part No Thread O.D. Height Colour

PUSH IN BREATHER
AF77-2003 -6 40mm 1-7/16” 37mm 1-9/16” Polished
ADAPTER TO -12AN AF77-2003BLK -6 40mm 1-7/16” 37mm 1-9/16” Black
AF77-2002 -8 60mm 2-3/8” 50mm 2” Polished
Aeroflow’s Push In Breather adapter simply pushes firmly into any cover with AF77-2002BLK -8 60mm 2-3/8” 50mm 2” Black
a 31.75mm (1-1/4”) hole when used with a grommet and converts to -12AN AF77-2000 -10 75mm 3” 75mm 3” Polished
to easily plumb up your breather / vent tank. Suits 1” grommet AF1859-1000. AF77-2000BLK -10 75mm 3” 75mm 3” Black
AF77-2001 -12 75mm 3” 75mm 3” Polished
Size Black Silver AF77-2001BLK -12 75mm 3” 75mm 3” Black

-12AN AF77-2012BLK AF77-2012

106 aeroflowperformance.com
 BREATHER FILTERS & ADAPTERS

SCREW IN BREATHER ADAPTER

SUITS NISSAN
The Rocker Cover Breather Adapter is a screw in -10AN adapter that suits
Nissan valve covers with a threaded hole. Fits all RB30 and some SR20 with
threaded hole. Available in blue, black and silver.
BOLT IN BREATHER BULKHEAD
Bulkhead style vented nut and bolt for use on rocker covers, Silver Size Blue Black Silver
designed for use with AF77-2000 & AF77-2001.
-10 bulkhead requires 22mm (7/8) hole in rocker cover. -10AN AF708-10-M19 AF708-10-M19BLK AF708-10-M19S
-12 bulkhead requires 27mm (1-1/16) hole in rocker cover.

Size Blue Black Silver

-10AN AF777-10 AF777-10BLK AF777-10S
-12AN AF777-12 AF777-12BLK AF777-12S

PRESS IN BREATHER ADAPTER

SUITS NISSAN
Press in breather adapter to suit Nissan RB20, RB25, RB26 CA18 & SR20
valve covers to replace the standard breather adapter. Also fits other models.

Size Blue Black Silver

RB20, RB25 CA18 & SR20
15.9mm (5/8”) Knurl diameter
-10AN AF708-10-01 AF708-10-01BLK AF708-10-01S
RB26

AIR FILTRATION
22mm (7/8”) Knurl diameter
-10AN AF708-10-03 AF708-10-03BLK AF708-10-03S
LS SERIES OIL FILL CAP BREATHER -12AN AF708-12-03 AF708-12-03BLK AF708-12-03S

This handy oil fill cap breather by Aeroflow Performance is the easiest way
to add an aftermarket catch tank to the GM LS engine without the need to
modify the OEM valve cover. These late model valve cover fill caps screw
AF708-08F AF708-08R
into the valve cover like an ordinary cap. They feature an internal baffle
inside the cap which helps to reduce transfer of oil to catch can. A -10 ORB
is located in the centre for custom plumbing to the catch can or PCV. Billet
aluminium construction with a black anodized finish.
Note: Requires original GM o-ring to be used.

Part No Description
AF708-10-10BLK LS series oil fill cap breather

BREATHER ADAPTERS SUITS FORD

Aeroflow Performance have added to their ever expanding range of rocker
cover breather adapters a front and rear adapter to suit the Ford Falcon 6cyl
engine in the BA, BF and FG chassis. These adapters are a simple push-fit
style and allow you plumb a breather/catch tank in -8AN size. Available for
front AF708-08F 20mm (51/64”)diameter or rear AF708-08R 19mm (3/4”) of
the engine in anodised Blue, Black and Silver finishes

Suits Blue Black Silver

Cover Front AF708-08F AF708-08FBLK AF708-08FS
Cover Rear AF708-08R AF708-08RBLK AF708-08RS

FORD BARRA OIL FILL CAP BREATHER BILLET PCV VALVE

This handy oil fill cap breather by Aeroflow Performance is the easiest way Aeroflow billet PCV valves are
to add an aftermarket catch tank to the Ford XR6 Barra engine without the available with a 9.52mm (3/8”) male
need to modify the OEM valve cover. These late model valve cover fill caps barb or -6AN. They suit 31.75mm
screw into the valve cover like an ordinary cap. They feature an internal (1-1/4”)holes in rocker covers.
baffle inside the cap which helps to reduce transfer of oil to catch can. A -10 Grommet included.
ORB is located in the centre for custom plumbing to the catch can or PCV.
Billet aluminium construction with a black anodized finish.
Part No Colour Description
Part No Description AF64-2106 Polished Billet PCV with 3/8” (9.52mm) barb
AF64-2106BLK Black Billet PCV with 3/8” (9.52mm) barb
AF708-10-12BLK FORD Barra oil fill cap breather AF64-2107 Polished Billet PCV with -6AN
AF64-2107BLK Black Billet PCV with -6AN
aeroflowperformance.com 107
 BREATHER FILTERS

BREATHERS/CRANKCASE FILTERS
Aeroflow’s huge range of breathers and crankcase filters are designed to provide supreme defence against dirt and airborne fragments without restricting air flow.
They come in many different sizes and styles to suit any applications from racing to show cars, Aeroflow will have you covered.

AF1822-7000 AF1821-7000 AF1822-7001 AF1821-7001 For grommet

see page 223s
Colour: Black Colour: Chrome With Outlet 15.8mm (5/8”) With Outlet 15.8mm (5/8”)
Filter O.D. 70mm (2-3/4”) Filter O.D. 70mm (2-3/4”) Colour: Black Colour: Chrome
Height: 36mm (1-7/16” ) Height: 36mm (1-7/16” ) Filter O.D. 70mm (2-3/4”) Filter O.D. 70mm (2-3/4”)
Flange O.D: 25.4mm (1”) Flange O.D: 25.4mm (1”) Height: 36mm 91-7/16”) Height: 36mm 91-7/16”)
Flange Style: Push in Flange Style: Push in Flange O.D: 25.4mm (1”) Flange O.D: 25.4mm (1”)
Flange Style: Push in Flange Style: Push in

AF2271-1170 AF2871-1170 AF2271-1520 AF2871-1520

Top Colour:Steel / Black Top Colour: Chrome With Shield With Shield
Bottom Type: Black male steel spout Bottom Type: Chrome male steel Top Colour: Steel / Black Top Colour: Chrome
Filter O.D. 76.20mm (3”) spout Bottom Type: Black male steel spout Bottom Type: Chrome male steel spout
Element Height: 50.8mm (2”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”)
Flange ID: 25.4mm (1”) Element Height: 50.8mm (2”) Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”)
Flange Style: Push in Flange ID: 25.4mm (1”) Flange ID: 25.4mm (1”) Flange ID: 25.4mm (1”)
Flange Style: Push in Flange Style: Push in Flange Style: Push in
AIR FILTRATION

AF2271-1490 AF2871-1490 AF2271-1516 AF2871-1516

Top: Steel / Black Top: Steel / Chrome With Shield With Shield
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Top: Steel / Black Top: Steel / Chrome
Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”)
Flange ID: 31.75mm (1-1/4”) Flange ID: 31.75mm (1-1/4”) Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”)
Flange Style: Push in / built in gromet Flange Style: Push in / built in gromet Flange ID: 31.75mm (1-1/4”) Flange ID: 31.75mm (1-1/4”)
Flange Style: Push in / built in gromet Flange Style: Push in / built in gromet

AF2271-2480 AF2871-2480 AF2271-1320 AF2871-1320

Top: Steel / Black Top: Steel / Chrome Top: Steel / Black Top: Steel / Chrome
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Filter O.D. 34.90mm (1-3/8”) Filter O.D. 34.90mm (1-3/8”) Filter O.D. 50.80mm (2”) Filter O.D. 50.80mm (2”)
Element Height: 28.60mm (1-1/8”) Element Height: 28.60mm (1-1/8”) Element Height: 38.10mm (1-1/2”) Element Height: 38.10mm (1-1/2”)
Flange ID: 14.3mm (9/16”) Flange ID: 14.3mm (9/16”) Flange ID: 9.52mm (3/8”) Flange ID: 9.52mm (3/8”)
Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on

AF2271-1330 AF2871-1330 AF2271-1340 AF2871-1340

Top: Steel / Black Top: Steel / Chrome
Top: Steel / Black Top: Steel / Chrome
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Filter O.D. 50.80mm (2”) Filter O.D. 50.80mm (2”)
Filter O.D. 50.80mm (2”) Filter O.D. 50.80mm (2”)
Element Height: 38.10mm (1-1/2”) Element Height: 38.10mm (1-1/2”)
Element Height: 38.10mm (1-1/2”) Element Height: 38.10mm (1-1/2”)
Flange ID: 15.90mm (5/8”) Flange ID: 15.90mm (5/8”)
Flange ID: 12.7mm (1/2”) Flange ID: 12.7mm (1/2”)
Flange Style: Clamp on Flange Style: Clamp on
Flange Style: Clamp on Flange Style: Clamp on

108 aeroflowperformance.com
 BREATHER FILTERS

AF2271-1360 AF2871-1360 AF2271-1370 AF2871-1370

Top: Steel / Black Top: Steel / Chrome Top: Steel / Black Top: Steel / Chrome
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Filter O.D. 50.80mm (2”) Filter O.D. 50.80mm (2”) Filter O.D. 50.80mm (2”) Filter O.D. 50.80mm (2”)
Element Height: 38.10mm (1-1/2” ) Element Height: 38.10mm (1-1/2” ) Element Height: 38.10mm (1-1/2” ) Element Height: 38.10mm (1-1/2” )
Flange ID: 19.05mm (3/4” ) Flange ID: 19.05mm (3/4” ) Flange ID: 25.4mm (1” ) Flange ID: 25.4mm (1” )
Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on

AF2271-1420 AF2871-1420 AF2271-1390 AF2871-1390

Top: Steel / Black Top: Steel / Chrome Top: Steel / Black Top: Steel / Chrome
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”)
Element Height: 57.15mm (2-1/4”) Element Height: 57.15mm (2-1/4”) Element Height: 63.5mm (2-1/2” ) Element Height: 63.5mm (2-1/2” )
Flange ID: 25.4mm (1”) Flange ID: 25.4mm (1”) Flange ID: 31.75mm (1-1/4” ) Flange ID: 31.75mm (1-1/4” )
Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on

AF2271-1440 AF2871-1440 AF2271-1460 AF2871-1460

AIR FILTRATION
Top: Steel / Black Top: Steel / Chrome Top: Steel / Black Top: Steel / Chrome
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”)
Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”)
Flange ID: 34.9mm (1-3/8” ) Flange ID: 34.9mm (1-3/8” ) Flange ID: 38.10mm (1-1/2”) Flange ID: 38.10mm (1-1/2”)
Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on

AIR FILTER
CLEANING
PRODUCTS
Aeroflow’s air filter cleaning
products are specifically
formulated for cleaning
AF2271-1480 AF2871-1480 and re-oiling all Aeroflow
reusable/washable filters
Top: Steel / Black Top: Steel / Chrome and all types of oil-based
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber air filters.
Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”)
Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”)
Flange ID: 44.45mm (1-3/4”) Flange ID: 44.45mm (1-3/4”)
Flange Style: Clamp on Flange Style: Clamp on
Part No Description
AF2000-5050 Aeroflow air filter cleaning kit contains 295ml
NOTE: WARRANTY VOID UNLESS SERVICED WITH AEROFLOW (10oz) oil pump style 295ml (10oz) cleaner pump style
CLEANING KIT AF2000-5050 AF2000-0606 Aeroflow air filter cleaner 295ml (10oz) pump style
AF2000-0533 Aeroflow air filter oil 295ml (10oz) squeeze style

AF2271-1513 AF2871-1513 AF2271-1514 AF2871-1514

With Shield With Shield With Shield With Shield
Top: Steel / Black Top: Steel / Chrome Top: Steel / Black Top: Steel / Chrome
Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber Bottom Type: Polyurethane Rubber
Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”) Filter O.D. 76.20mm (3”)
Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”) Element Height: 63.5mm (2-1/2”)
Flange ID: 34.9mm (1-3/8”) Flange ID: 34.9mm (1-3/8”) Flange ID: 38.10mm (1-1/2”) Flange ID: 38.10mm (1-1/2”)
Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on Flange Style: Clamp on
aeroflowperformance.com 109
 CLEANING KIT & INSTRUCTIONS

AIR FILTER CLEANING PRODUCTS

Panel Filters

Aeroflow’s air filter cleaning products are specifically formulated for cleaning
and re-oiling all Aeroflow reusable/washable filters and all types of oil-based
air filters.

Part No Description
AF2000-5050 Aeroflow air filter cleaning kit contains 295ml
(10oz) oil pump style 295ml (10oz) cleaner pump style
AF2000-0606 Aeroflow air filter cleaner 295ml (10oz) pump style
AF2000-0533 Aeroflow air filter oil 295ml (10oz) pump style
AIR FILTER CLEANING INSTRUCTIONS

Aeroflow Air Filter Cleaning

and Maintenance Instructions

Step 1
Carefully use a soft brush to brush off any excess dust and
dirt from filter. Spray Aeroflow Air Filter Cleaner across both
sides of the filter and allow
to soak for 10-15 minutes.

Step 2
Rinse filter with water from the inside until the water runs clear
through the filter. Use low pressure water for best results. Make
sure dirt is flushed out of the filter and rinse until all traces of the
cleaner is gone. Using high pressure will damage the filter.igh

Step 3
Shake off excess water and allow filter to dry naturally for 6-8
hours. DO NOT BLOW DRY FILTER. Be sure to not apply any oil
until the filter is completely dry.

Step 4
Apply Aeroflow Air Filter Oil evenly across the top of each pleat.
Apply a light even line that will soak through to the rest of the
pleat but be sure not to over oil the filter as TOO MUCH OIL will
affect the MAF sensor. Allow the oil to dry for 20 minutes before
reinstalling and using the filter.

110 aeroflowperformance.com
 CLEANING KIT & INSTRUCTIONS

Round Filter Elements Pod filters

AIR FILTER CLEANING INSTRUCTIONS

aeroflowperformance.com 111
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

ALFA ROMEO
ALFA ROMEO 147 P 3.2i V6 DOHC 16V AR32310 8 2003 2 2007 AF2296-1002
ALFA ROMEO 156 P 3.2i V6 MPFI DOHC 24V 932A0 8 2002 0 2005 AF2296-1002
ALFA ROMEO 166 P 3.0i V6 MPFI DOH AR3 7 1999 1 2009 AF2296-1002
ALFA ROMEO ALFASUD P 1.2 CARB SOHC 8V AS3 4 1974 0 1978 AF2296-2004
ALFA ROMEO ALFASUD P 1.5 CARB SOHC 8V AR3 7 1979 0 1983 AF2296-2004
ALFA ROMEO ALFASUD SPRINT P 1.5 SOHC AR3 0 1979 0 1983 AF2296-2004
ALFA ROMEO ALFASUD SPRINT TC P 1.5 CARB SOHC 8V AR3 5 1984 0 1985 AF2296-2004
ALFA ROMEO ALFASUD Ti COUPE P 1.5 CARB SOHC 8V AR3 0 1979 0 1984 AF2296-2004
ALFA ROMEO ALFETTA 2000 P 2.0 CARB DOHC 16 ARO 3 1978 0 1984 AF2296-2004
ALFA ROMEO ALFETTA GLC P 2.0 DOHC ARO 3 1984 0 1985 AF2296-2004
ALFA ROMEO ALFETTA GTV 2000 P 2.0 CARB DOHC 16 ARO 3 1977 0 1981 AF2296-2004
ALFA ROMEO GIULIETTA P 1.8 & 2.0 CARB D ARO 0 1981 0 1986 AF2296-2004
ALFA ROMEO GT P 1.8 0 1974 0 1987 AF2296-2004
ALFA ROMEO GT COUPE P 3.2 V6 MPFI DOHC 936 7 2004 7 2010 AF2297-1002
ALFA ROMEO GTV COUPE P 3.0 V6 MPFI DOHC AR1 6 1998 9 2003 AF2296-1002
ALFA ROMEO GTV COUPE P 3.2 V6 MPFI DOHC 936 10 2003 12 2004 AF2296-1002
ALFA ROMEO GTV STRADA P 0 1974 0 1987 AF2296-2004
ALFA ROMEO SPIDER P 3.0 & 3.2 V6 MPF AR1 7 2001 0 2005 AF2296-1002
ALFA ROMEO SPORTIVA P 2.0 0 1974 0 1987 AF2296-2004
ALFA ROMEO SPRINT TROPHY P 1.2, 1.3 & 1.5 0 1974 0 1985 AF2296-2004
ALFA ROMEO SUPER SPRINT P 1.2, 1.3 & 1.5 0 1974 0 1987 AF2296-2004
AUDI
AUDI 80 B4 P 2.6E MPFI SOHC 1 ABC 10 1993 0 1995 AF2296-2004
AIR & OIL FILTER APPLICATION GUIDE

AUDI 80 B4 QUATTRO P 2.8 MPFI SOHC 12 AAH 8 1992 3 1994 AF2296-2004

AUDI A3 8P FSI P 2.0 MPFI DOHC 16V BLR 0 2005 0 2006 AF2031-2888
AUDI A3 8P QT P 2.0 MPFI DOHC 16V AXX , BWA 10 2005 1 2009 AF2031-2888
AUDI A3 8P TDI TD 2.0 DOHC 16V BKD 7 2004 1 2009 AF2031-2865
AUDI A3 8P TDI TD 1.9 SOHC 8V BLS 3 2008 1 2010 AF2031-2865
AUDI A3 8P TDI TD 2.0 DOHC 16V CBB 1 2009 9 2011 AF2031-2865
AUDI A3 8P TDI TD 2.0 DOHC 16V CLJ 10 2011 0 2015 AF2031-2865
AUDI A3 8P TFSI P 1.8L MPFI DOHC 1 BYT 0 2007 8 2013 AF2031-2865
AUDI A4 B5 P 2.6 V6 MPFI SOHC ABC 8 1995 0 1998 AF2296-2004
AUDI A4 B5 P 2.4 V6 MPFI DOHC APS 2 1998 0 2001 AF2296-2004
AUDI A4 B5 P 2.8 V6 MPFI DOHC ACK 10 1998 0 1999 AF2296-2004
AUDI A4 B6 P 3.0 V6 MPFI DOHC ASN 7 2001 0 2005 AF2296-2004
AUDI A4 B6 P 2.4 V6 MPFI DOHC BDV 4 2002 0 2005 AF2296-2004
AUDI A4 B6 P 3.0 V6 MPFI DOHC BBJ 12 2002 0 2006 AF2296-2004
AUDI A4 B7 P 2.0 MPFI DOHC 16 BWE 10 2007 8 2009 AF2031-2865
AUDI A6 P 2.7 V6 MPFI DOHC ARE 2 2002 0 2004 AF2296-2004
AUDI A6 C4 P 2.6 V6 MPFI SOHC ABC 11 1994 0 1997 AF2296-2004
AUDI A6 C4 P 2.8 V6 MPFI DOHC ACK 1 1997 11 1997 AF2296-2004
AUDI A6 C4 QUATTRO P 2.6 V6 MPFI DOHC ACZ 11 1994 0 1997 AF2296-2004
AUDI A6 C5 P 2.4 V6 MPFI DOHC AGA 11 1997 0 2000 AF2296-2004
AUDI A6 C5 P 2.4 V6 MPFI DOHC BDV 2 2002 0 2004 AF2296-2004
AUDI A6 C5 4B P 3.0 V6 MPFI DOHC ASN 3 2002 0 2004 AF2296-2004
AUDI A6 C5 QUATTRO P 2.4 V6 MPFI DOHC APS 11 1997 0 2001 AF2296-2004
AUDI A8 D2 P 2.8 V6 MPFI SOHC AAH 5 1995 0 1996 AF2296-2004
AUDI ALLROAD C5 TD 2.5 DOHC 24V BAU 0 2000 0 2006 AF2296-2004
AUDI Q3 8U TDI TD 2.0 DOHC 16V CFF 3 2012 0 2015 AF2031-2865
AUDI Q3 8U TFSI P 2.0 DI DOHC 16V CCZ 3 2012 0 2015 AF2031-2865
AUDI Q3 8U TFSI P 1.4 DI DOHC 16V CHP 2 2014 0 2015 AF2031-2865
AUDI Q7 4L FSI P 3.6 V6 MFPI DOHC 24V BHK 9 2006 9 2010 AF2031-2857
AUDI Q7 4L FSI P 4.2 V8 MFPI DOHC 32V BAR 2 FILTERS REQ 9 2006 9 2010 AF2031-2857
AUDI Q7 4L TDI TD 3.0 V6 DOHC 24V BUG 9 2006 6 2007 AF2031-2857
AUDI Q7 4L TDI TD 3.0 V6 DOHC 24V CASA 7 2007 9 2010 AF2031-2857
AUDI Q7 4L TDI TD 4.2 V8 DOHC 32V BTR 2 FILTERS REQ 1 2008 9 2010 AF2031-2857
AUDI Q7 4L TDI TD 4.2 V8 DOHC 32V CCFA 2 FILTERS REQ 11 2009 9 2010 AF2031-2857
AUDI Q7 4L TDI TD 6.0 W12 DOHC 48V CCGA 2 FILTERS REQ 11 2009 7 2015 AF2031-2857
AUDI Q7 4L TDI TD 3.0 V6 DI DOHC 24V CJGA 10 2010 9 2011 AF2031-2857
AUDI Q7 4L TDI TD 4.2 V8 DOHC 32V CCFC 2 FILTERS REQ 10 2010 7 2015 AF2031-2857
AUDI Q7 4L TDI TD 3.0 V6 DOHC 24V CRC 10 2011 7 2015 AF2031-2857
AUDI Q7 4L TFSI P 3.0 V6 DI DOHC 24V CJT 10 2010 7 2015 AF2031-2857

112 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

AUDI S4 S5 QUATTRO P 2.7 V6 DOHC 30V APB 12 1999 8 2003 AF2296-2004

AUDI TT 8J TDI TD 2.0 4 DOHC 16V CBBB 7 2009 10 2010 AF2031-2865
AUDI TT 8J TDI TD 2.0 4 DI DOHC 16V CFG 11 2010 1 2015 AF2031-2865
AUDI TT 8J TFSI P 2.0 4 MPFI DOHC 16V BWA 11 2006 10 2010 AF2031-2888
AUDI TT 8J TFSI P 1.8 4 MPFI DOHC 16V CDAA 7 2009 7 2015 AF2031-2865
AUDI TT 8J TFSI P 2.0 4 DI DOHC 16V CES 11 2010 7 2015 AF2031-2865
AUDI TT 8J TFSI QT P 2.0 4 MPFI DOHC 16V CCZA 8 2009 10 2010 AF2031-2865
BMW
BMW 1 SERIES 116i F20 P 1.6 4 DI DOHC 16V N13B16A 10 2011 0 2018 AF2031-2990
BMW 1 SERIES 125i F20 P 2.0 4 DI DOHC 16V N20B20A 3 2012 0 2018 AF2031-2990
BMW 1 SERIES 135i E82 SPORT P 2.0 6 DI DOHC 24V N54B30A 5 2008 0 2010 AF2031-2367
BMW 1 SERIES 135i E88 P 3.0 6 DI DOHC 24V N54B30A 5 2008 0 2010 AF2031-2367
BMW 1 SERIES M E82 P 3.0 6 DI DOHC 24V N54B30A 8 2011 2 2014 AF2031-2367
BMW 2 SERIES 220i F22 P 2.0 4 DI DOHC 16V N20B20U 1 2014 0 2018 AF2031-2990
BMW 2 SERIES 228i F22 P 2.0 4 DI DOHC 16V N20B20 5 2014 0 2018 AF2031-2990
BMW 3 SERIES 316i F30 P 1.6 4 DI DOHC 16V N13B16A 8 2013 0 2018 AF2031-2990
BMW 3 SERIES 318i E30 P 1.8 4 MPFI SOHC 8V M10B18 5 1983 10 1987 AF2296-1002
BMW 3 SERIES 318i E46 P 1.9 4 MPFI SOHC 8V M43B19 9 1998 12 2001 AF2031-2231
BMW 3 SERIES 320ci E36 P 2.0 6 MPFI DOHC 24V M50B20 4 1991 12 1995 AF2031-2231
BMW 3 SERIES 320ci E46 P 2.2 6 MPFI DOHC 24V M54B22 10 2000 4 2005 AF2031-2231
BMW 3 SERIES 320ci F30 P 2.0 4 DI DOHC 16V N20B20A 4 2012 0 2018 AF2031-2990
BMW 3 SERIES 320ci F31 P 2.0 4 DI DOHC 16V N20B20A 7 2013 0 2018 AF2031-2990
BMW 3 SERIES 323ci E36 P 2.5 6 MPFI DOHC 24V M52B25 1 1996 8 1998 AF2031-2231
BMW 3 SERIES 323ci E46 P 2.5 6 MPFI DOHC 24V M52B25 9 1998 10 2000 AF2031-2231

AIR & OIL FILTER APPLICATION GUIDE

BMW 3 SERIES 325Ti E46 P 2.5 6 MPFI DOHC 24V M54B25 3 2002 7 2005 AF2031-2231
BMW 3 SERIES 325ci E46 P 2.5 6 MPFI DOHC 24V M54B25 10 2000 2 2007 AF2031-2231
BMW 3 SERIES 328ci E36 P 2.8 6 MPFI DOHC 24V M52B28 6 1995 0 1999 AF2031-2231
BMW 3 SERIES 328ci E46 P 2.8 6 MPFI DOHC 24V M52B28 6 1998 9 2000 AF2031-2231
BMW 3 SERIES 328i E36 P 2.8 6 MPFI DOHC 24V M52B28 6 1995 8 2000 AF2031-2231
BMW 3 SERIES 328i E46 P 2.8 6 MPFI DOHC 24V M52B28 9 1998 10 2000 AF2031-2231
BMW 3 SERIES 328i F30 P 2.0 4 DI DOHC 16V N20B20A 1 2012 0 2018 AF2031-2990
BMW 3 SERIES 330ci E46 P 3.0 6 MPFI DOHC 24V M54B30 9 2000 2 2007 AF2031-2231
BMW 3 SERIES 330i E46 P 3.0 6 MPFI DOHC 24V M54B30 9 2000 4 2005 AF2031-2231
BMW 3 SERIES 335i E90 P 3.0 6 DI DOHC 24V N54B30A 12 2006 12 2011 AF2031-2367
BMW 3 SERIES 335i E91 P 3.0 6 DI DOHC 24V N54B30A 2 2008 1 2012 AF2031-2367
BMW 3 SERIES 335i E92 P 3.0 6 DI DOHC 24V N54B30A 10 2006 1 2012 AF2031-2367
BMW 3 SERIES 335i E92 P 3.0 6 DI DOHC 24V N55B30A 5 2010 1 2012 AF2031-2367
BMW 4 SERIES 420i F32 P 2.0 4 DI DOHC 16V N20B20 10 2013 0 2018 AF2031-2990
BMW 4 SERIES 428i F32 P 2.0 4 DI DOHC 16V N20B20 9 2013 0 2018 AF2031-2990
BMW 5 SERIES 523i E39 P 2.5 6 MPFI DOHC 24V M52B25 4 1996 11 2000 AF2031-2231
BMW 5 SERIES 525i E39 P 2.5 6 MPFI DOHC 24V M52B25 12 2000 10 2003 AF2031-2231
BMW 5 SERIES 528i E39 P 2.8 6 MPFI DOHC 24V M52B28 4 1996 11 2000 AF2031-2231
BMW 5 SERIES 530i E39 P 3.0 6 MPFI DOHC 24V M54B30 12 2000 10 2003 AF2031-2231
BMW M3 E36 P 3.0 6 MPFI DOHC 24V S50B30 6 1994 1 1996 AF2031-2231
BMW M3 E36 P 3.2 6 MPFI DOHC 24V S50B32 2 1996 6 2000 AF2031-2231
BMW M3 E46 P 3.2 6 MPFI DOHC 24V S54B32 5 2001 0 2005 AF2031-2231
BMW X3 E83 P 2.5 6 MPFI DOHC 24V M54B25 6 2004 11 2006 AF2031-2231
BMW X3 E83 P 3.0 6 MPFI DOHC 24V M54B25 6 2004 11 2006 AF2031-2231
BMW Z3 E36 , E37 P 2.8 6 MPFI DOHC 24V M52B28 4 1997 7 2000 AF2031-2231
BMW Z3 E36 , E37 P 2.0 6 MPFI DOHC 24V M52B20 6 1999 10 2000 AF2031-2231
BMW Z3 E36 , E37 P 3.0 6 MPFI DOHC 24V M54B30 9 2000 12 2002 AF2031-2231
BMW Z3 E36 , E37 P 2.2 6 MPFI DOHC 24V M52B22 10 2000 12 2002 AF2031-2231
BMW Z4 E85 P 2.5 6 MPFI DOHC 24V M54B25 7 2003 3 2006 AF2031-2231
BMW Z4 E85 P 3.0 6 MPFI DOHC 24V M54B30 7 2003 3 2006 AF2031-2231
CHERRY
CHERRY J1 S2X P 1.3 MPFI DOHC 16 S2X 2 2011 0 2015 AF2296-2004
CHEVROLET
CHEVROLET BEL AIR P SBC & BBC (LONG OIL FILTER) 0 1960 0 1981 AF2296-3002
CHEVROLET BEL AIR P SBC & BBC (SHORT OIL FILTER) 0 1960 0 1981 AF2296-2002
CHEVROLET CADILLAC P SBC & BBC (LONG OIL FILTER) 0 1960 0 1981 AF2296-3002
CHEVROLET CADILLAC P SBC & BBC (SHORT OIL FILTER) 0 1960 0 1981 AF2296-2002
CHEVROLET CAMARO P SBC & BBC (LONG OIL FILTER) 0 1967 0 1987 AF2296-3002
CHEVROLET CAMARO P SBC & BBC (SHORT OIL FILTER) 0 1967 0 1987 AF2296-2002

aeroflowperformance.com 113
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

CHEVROLET CAMARO P 5.7 LS CHEV 0 1987 0 2002 AF2296-1007

CHEVROLET CAMARO P 6.0 & 6.2 LS CHEV 0 2010 0 2016 AF2296-1017
CHEVROLET CHEVELLE P SBC & BBC (LONG OIL FILTER) 0 1964 0 1977 AF2296-3002
CHEVROLET CHEVELLE P SBC & BBC (SHORT OIL FILTER) 0 1964 0 1977 AF2296-2002
CHEVROLET CORVETTE P SBC & BBC (LONG OIL FILTER) 0 1955 0 1992 AF2296-3002
CHEVROLET CORVETTE P SBC & BBC (SHORT OIL FILTER) 0 1955 0 1992 AF2296-2002
CHEVROLET CORVETTE P 5.7 LS CHEV 0 1997 0 2003 AF2297-1007
CHEVROLET CORVETTE P 6.0 & 6.2 LS CHEV 0 2004 0 2016 AF2296-1017
CHEVROLET IMPALA P SBC & BBC (LONG OIL FILTER) 0 1957 0 1996 AF2296-3002
CHEVROLET IMPALA P SBC & BBC (SHORT OIL FILTER) 0 1957 0 1996 AF2296-2002
CHEVROLET NOVA P SBC & BBC (LONG OIL FILTER) 0 1962 0 1979 AF2296-3002
CHEVROLET NOVA P SBC & BBC (SHORT OIL FILTER) 0 1962 0 1979 AF2296-2002
CHRYSLER
CHRYSLER 300 LX P V8 6.4 MPFI DOHC HEM 7 2012 0 2015 AF2296-2010
CHRYSLER 300C LE P 3.5 V6, 5.7 & 6. Y1 11 2005 1 2012 AF2296-2004
CHRYSLER 300C LE P 3.5 V6 MPFI Y1 0 2008 0 2015 AF2296-2010
CHRYSLER GRAND VOYAGER GS LWB & RG AWD P 3.3 V6 MPFI OHV A4 6 1997 3 2008 AF2296-2004
CHRYSLER GRAND VOYAGER RT P 3.8 V6 MPFI OHV EGL 4 2008 8 2011 AF2296-1002
CHRYSLER NEON JA SE, LX & JB SE, LE P 2.0 MPFI SOHC 16 S4R 7 1996 7 2002 AF2296-1002
CHRYSLER PT CRUISER PF & PG P 2.0 & 2.4 MPFI D IT 7 2000 6 2010 AF2296-1002
CHRYSLER SEBRING JS P 2.4 MPFI DOHC 16 7N 5 2007 6 2010 AF2296-1017
CHRYSLER SEBRING JS P 2.7 V6 MPFI DOHC 8N 12 2007 12 2008 AF2296-1017
CHRYSLER SEBRING JS P 2.7 V6 MPFI DOHC 8N 0 2008 12 2011 AF2296-2010
CHRYSLER VIPER P 8.0 V10 MPFI 11 2002 9 2003 AF2296-2004
CHRYSLER VOYAGER P 3.3 V6 MPFI OHV A4 2 1997 3 2008 AF2296-2004
AIR & OIL FILTER APPLICATION GUIDE

CITROEN
CITROEN C4 1CM AIRX P 2.0 MPFI DOHC 16 4B1 7 2012 0 2015 AF2296-1010
DAEWOO
DAEWOO 1.5I P 1.5 MPFI G15 7 1994 10 1995 AF2296-1001
DAEWOO CIELO GL P 1.5 MPFI SOHC 8V G15 10 1995 0 1998 AF2296-1001
DAEWOO CIELO GLX P 1.5 MPFI DOHC 16 A15 10 1995 7 1997 AF2296-1001
DAEWOO ESPERO CD P 2.0 MPFI DOHC 8V C20 3 1995 7 1997 AF2296-1001
DAEWOO KALOS T200 P 1.5 MPFI DOHC 8V F15 3 2003 12 2004 AF2296-1001
DAEWOO LACETTI J200 SERIES P 1.8 MPFI DOHC 16 C18 8 2003 12 2004 AF2296-1001
DAEWOO LANOS P 1.5 8V AND 1.6 1 A15 9 1997 0 2003 AF2296-1001
DAEWOO LEGANZA P 2.0 & 2.2 MPFI D C20 7 1997 0 2003 AF2296-1001
DAEWOO NUBIRA J100 & J150 P 1.6 & 2.0 MPFI D A16 6 1997 5 2003 AF2296-1001
DAEWOO TACUMA P 2.0 MPFI DOHC 16 T20 11 2000 12 2004 AF2296-1001
DAIHATSU
DAIHATSU CHARADE DUET VAN P 1.0 SOHC 6V CB 0 1983 0 1987 AF2296-1002
DAIHATSU CHARADE G10 P 1.0 INCLUDING TU FRO 0 1980 12 1982 AF2296-1002
DAIHATSU CHARADE G100 P 1.0 SOHV 6V CB2 6 1987 0 1993 AF2296-1003
DAIHATSU CHARADE G100 P 1.3 EFI HC- 10 1988 5 1998 AF2296-1003
DAIHATSU CHARADE G100 TURBO P 1.0 SOHC 6V TURB CB6 6 1987 0 1993 AF2296-1003
DAIHATSU CHARADE G102 P 1.3 HC- 6 1987 3 1998 AF2296-1003
DAIHATSU CHARADE G102 P 1.3 MPFI SOHC 16 HC- 7 1988 0 1993 AF2296-1003
DAIHATSU CHARADE G102 P 1.3 EFI HC- 10 1988 5 1998 AF2296-1003
DAIHATSU CHARADE G11 P 1.0 SOHC 6V CB2 4 1983 0 1987 AF2296-1002
DAIHATSU CHARADE G11 TURBO P 1.0 SOHC 6V CB5 3 1984 0 1987 AF2296-1002
DAIHATSU CHARADE G200 P 1.3 MPFI SOHC 16 HC- 6 1993 0 1996 AF2296-1003
DAIHATSU CHARADE G200 P 1.0 SOHC 6V CB2 10 1993 0 1996 AF2296-1003
DAIHATSU CHARADE G200 P 1.3 EFI HC- 10 1998 5 1998 AF2296-1003
DAIHATSU CHARADE G200B P 1.3 MPFI SOHC 1 HC- 5 1996 0 1998 AF2296-1003
DAIHATSU CHARADE G202B P 1.0 SOHC 6V CB2 5 1996 3 1998 AF2296-1003
DAIHATSU DELTA V67 P 2.0 CARBURETOR 3Y 11 1984 10 1988 AF2296-2004
DAIHATSU DELTA V76 D 3.4 OHV 13B 11 1984 0 1990 AF2296-3001
DAIHATSU DELTA V98 & V99 D 3.0 OHV B 11 1984 11 1996 AF2296-3001
DAIHATSU DELTA V107 P 2.2 CARBURETOR 4Y 10 1987 0 1999 AF2296-2004
DAIHATSU DELTA V108 P 2.2 CARBURETOR 4Y 10 1987 0 1999 AF2296-2004
DAIHATSU DELTA V116,V118 & V119 D 3.7 14B 0 1989 5 2003 AF2296-3001
DAIHATSU DELTA V30 P 2.0 CARBURETOR 5R 0 1979 0 1984 AF2296-3001
DAIHATSU DELTA V31 P 2.0 CARBURETOR 5R 0 1979 0 1984 AF2296-3001
DAIHATSU DELTA V32 P 2.0 CARBURETOR 5R 0 1979 0 1984 AF2296-3001

114 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

DAIHATSU DELTA V34 P 2.0 CARBURETOR 5R 0 1979 0 1984 AF2296-3001

DAIHATSU DELTA V35 P 2.0 CARBURETOR 5R 0 1979 0 1984 AF2296-3001
DAIHATSU DELTA V47 D 3.4 OHV 3B 8 1982 0 1984 AF2296-3001
DAIHATSU DELTA V48 D 3.4 OHV 3B 8 1982 0 1984 AF2296-3001
DAIHATSU DELTA V68 P 2.0 CARBURETOR 3Y 11 1984 10 1988 AF2296-2004
DAIHATSU DELTA V69 P 2.0 CARBURETOR 3Y 11 1984 0 1988 AF2296-2004
DAIHATSU DELTA V78 D 3.4 OHV 13B 11 1984 0 1988 AF2296-3001
DAIHATSU DELTA V79 D 3.4 OHV 13B 11 1984 0 1989 AF2296-3001
DAIHATSU FEROZA F300 P 1.6 EFI HD- 0 1989 2 1995 AF2296-1003
DAIHATSU HANDIVAN L55V P 600cc 2cyl CARBU AB3 5 1981 0 1982 AF2296-1002
DAIHATSU HANDIVAN L60V P 600cc 2cyl SOHC AD1 0 1982 0 1985 AF2296-1002
DAIHATSU HANDIVAN L80 P 850cc 3cyl 0 1986 0 1990 AF2296-1002
DAIHATSU HIJET S60T,S60V & S65T P 500cc 2cyl AB2 0 1981 2 1992 AF2296-1002
DAIHATSU HIJET S65V P 500cc 2cyl AB2 0 1981 2 1992 AF2296-1002
DAIHATSU HIJET S70T & S70V P 850cc 3cyl CD2 0 1981 2 1992 AF2296-1002
DAIHATSU HIJET S75T,SV75V,S76T & SV76V P 1.0 3cyl CB2 0 1981 2 1992 AF2296-1002
DAIHATSU HIJET S85T & S85V P 1.0 3cyl CB 0 1981 2 1992 AF2296-1002
DAIHATSU HIJET S85T & S85V P 1.0 3cyl CB 0 1987 2 1992 AF2296-1003
DAIHATSU MIRA L200 P 700cc MPFI SOHC EF- 4 1992 4 1995 AF2296-1003
DAIHATSU MIRA L201 P 900cc SOHC 6V ED1 11 1990 12 1992 AF2296-1003
DAIHATSU MIRA L201V P 700cc SOHC 8V EF- 9 1993 0 1995 AF2296-1003
DODGE
DODGE AVENGER JS P 2.0 & 2.4 MPFI D 2.4 8 2007 7 2009 AF2296-1017
DODGE AVENGER JS P 2.7 V6 MPFI DOHC 8N 1 2008 6 2010 AF2296-1017
DODGE CALIBER PM P 1.8 & 2.0 MPFI D 1.8 8 2006 0 2015 AF2296-1017

AIR & OIL FILTER APPLICATION GUIDE

DODGE CALIBER PM P 2.4 MPFI DOHC 16 9D 10 2006 8 2010 AF2296-1017
DODGE JOURNEY JC P 2.7 V6 MPFO DOHC 8T 9 2008 0 2015 AF2296-1017
EUNOS
EUNOS 30X EC P 1.8 V6 MPFI DOHC K8- 11 1992 5 1996 AF2296-1010
EUNOS 500 CA P 2.0 V6 MPFI DOHC KF- 11 1992 5 1996 AF2296-1010
EUNOS 800 TA P 2.5 V6 MPFI DOHC KL 3 1994 5 1996 AF2296-1010
EUNOS 800M TA J76E P 2.3 V6 MILLER CY KJ 3 1994 5 1996 AF2296-1010
FIAT
FIAT 500 150 P 1.4 MPFI DOHC 16 169 2 2008 1 2012 AF2296-1010
FIAT 500 150 P 1.2 MPFI DOHC 8V 169 2 2008 0 2015 AF2296-1010
FIAT DUCATO TD 2.3 4 DOHC 16V F1AE0481C 0 2003 2 2012 AF2296-2010
FIAT DUCATO TD 2.3 4 CRD DOHC 16V F1AE 2 2012 0 2018 AF2296-2010
FIAT FREEMONT JF P 2.4 DI DOHC 16V 26K 4 2013 0 2015 AF2296-1017
FIAT PUNTO P 1.4 MPFI SOHC 8V 350 7 2013 0 2015 AF2296-1010
FIAT PUNTO DYNAMIC P 1.4 MPFI SOHC 8V 350 7 2006 5 2010 AF2296-1010
FIAT X1/9 P 1.3 CARB SOHC 8V 128 5 1978 0 1981 AF2296-2004
FORD
FORD CAPRI SA SERIES 1 P 1.6 MPFI SOHC 8V B6E 10 1989 0 1990 AF2297-1004
FORD CAPRI SB SERIES 2 INC TURBO P 1.6 MPFI DOHC 16 B6 10 1990 0 1992 AF2296-1004
FORD CAPRI SC INC TURBO P 1.6 MPFI DOHC 16 B6 4 1992 7 1993 AF2296-1004
FORD CAPRI SE INC TURBO P 1.6 MPFI DOHC 16 B6 8 1993 7 1994 AF2296-1004
FORD CORSAIR UA & GHIA P MPFO DOHC 12V KA2 11 1989 0 1992 AF2296-2008 AF2031-2031
FORD CORSAIR US & GL P 2.0 MPFI SOHC 8V CA2 11 1989 0 1992 AF2296-2008 AF2031-2031
FORD CORTINA TE P 6cyl OHV 0 1974 0 1976 AF2296-3001
FORD CORTINA TF P 2.0 MPFI 0 1976 0 1982 AF2296-3001
FORD CORTINA TF P 2.0 OHC 0 1980 0 1982 AF2296-2004
FORD COUGER SW & SX P 2.5 V6 MPFI DOHC LCB 9 1999 3 2004 AF2296-2010
FORD COURIER PC 2WD P 2.6 MPFI SOHC 12 G6 10 1991 0 1996 AF2296-1010
FORD COURIER PC,PD,PE,PG & PH 2&4wd P 2.6 MPFI DOHC 12 G6E 5 1996 0 2005 AF2296-1010
FORD COURIER PE TD 2.5 WL PANEL HOUSING 1 1999 5 2000 AF2031-3024
FORD COURIER PE TD 2.5 WL PANEL HOUSING 5 2000 11 2002 AF2296-3001 AF2031-3024
FORD COURIER PG TD 2.5 WL PANEL HOUSING 11 2002 7 2002 AF2296-3001 AF2031-3024
FORD COURIER PH TD 2.5 WL PANEL HOUSING 8 2004 12 2006 AF2296-3001 AF2031-3024
FORD COURIER PH inc 4WD P 4.0 V6 MPFI SOHC 12V 13V 2 2005 0 2006 AF2296-2010
FORD ECONOVAN SGMR P 1.4 CARB UC 5 1984 10 1985 AF2296-1004
FORD ECOSPORT BK P 1.0 3 DII DOHC 12V ECOBOOST 12 2013 0 2018 AF2296-1002 AF2031-2995
FORD ECOSPORT BK P 1.5 MPFI DOHC 16V DURATEC 12 2013 0 2018 AF2031-2995
FORD ESCAPE P 3.0 MPFI DOHC 24V BA,ZA,ZB,ZC 2 2001 0 2008 AF2296-2010

aeroflowperformance.com 115
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

FORD EXPLORER P 4.0 SOHC & OHV UN,UP,UQ,US 10 1996 10 2001 AF2296-3001
FORD EXPLORER P 4.0 & 4.6 MPFI SOHC 12V 16V UT,UX,UZ 11 2002 1 2008 AF2296-2010
FORD F100 P 4.1,4.9 & 5.8 V8 250,302W,351C 1 1978 0 1987 AF2296-3001
FORD F150 P 4.9 & 5.8 V8 302W,351W 8 1987 0 1993 AF2296-3001
FORD F250 P 5.8 V8 351W 1 1990 12 1990 AF2296-3001
FORD F250 P 5.4 V8 MPFI SOHC 16V RM 7 2001 0 2003 AF2296-2010 AF2041-0945
FORD F250 P 5.4 V8 MPFI SOHC 16V RN 11 2003 0 2007 AF2296-2010 AF2041-0945
FORD F350 P 4.1,4.9 & 5.8 V8 250,302W,351C 3 1982 0 1993 AF2296-3001
FORD F350 P 5.4 V8 MPFI SOHC 16V RM 7 2001 0 2003 AF2296-2010 AF2041-0945
FORD FAIRLANE P 6,V8 & CARB ZA,ZB,ZC,ZD,ZF,ZG,
ZH,ZJ,ZK,ZL,NA,NC,
NF,NL 3 1967 12 1999 AF2296-3001
FORD FAIRLANE P 6 & V8 MPFI NA,NC,NF,NL,AU,AUII, 6 1988 0 2003 AF2296-3001 AF2031-2015
FORD FAIRLANE P 4.0 & 5.4 MPFI DOHC 24V BA Series 1-2,BF,G8 7 2003 0 2007 AF2296-2010 AF2031-2852
FORD FALCON P 6 & V8 OHV MPFI SOHC 12V XK,XL,XM,XP,XR,XT,
XW,XY,XA,XB,XC,XD,
XE,XF,EA,EB 9 1960 8 1993 AF2296-3001
FORD FALCON P 6 & V8 MPFI SOHC 12V 16V EB,ED,EF,EL,AU,
AUII,AUIII 7 1991 9 2001 AF2296-3001 AF2031-2015
FORD FALCON P 5.0 V8 MPFI AUII,AUIII w/ Oil Cooler 4 2000 9 2002 AF2296-2004 AF2031-2015
FORD FALCON P 4.0 BARRA DOHC 24V BA 9 2002 9 2005 AF2296-3001 AF2031-2852
FORD FALCON P 4.0 BARRA & 5.4 V8 DOHC BA,BF 9 2002 4 2008 AF2296-2010 AF2041-0945
FORD FALCON LPG 4.0 BARRA FG 4 2008 6 2001 AF2296-2010
FORD FALCON P 4.0,5.0 & 5.4 MPFI DOHC 32V FG 5 2008 9 2010 AF2296-2010 AF2031-2950
AIR & OIL FILTER APPLICATION GUIDE

FORD FALCON P 5.0 DOHC 32V FG 10 2010 10 2014 AF2041-1993

FORD FALCON LPI 4.0 DOHC 24V FG,FGII 7 2011 10 2014 AF2296-2010
FORD FALCON P 4.0 BARRA,ECOLPI FGII TURBO,FGX 12 2011 0 2016 AF2296-2010 AF2031-2950
FORD FALCON P 2.0 DI DOHC 16V ECOBOOST FG,FGX 4 2012 0 2016 AF2296-1002 AF2031-2950
FORD FALCON P 5.0 MPFI DOHC 32V FGX BOSS 351 11 2014 0 2016 AF2041-1493
FORD FESTIVA P 1.3 & 1.5 MPFI SOHC 8V 16V WA,WB,WD 10 1991 12 1997 AF2296-1004
FORD FESTIVA P 1.3 & 1.5 MPFI SOHC 8V WF 1 1998 0 2001 AF2296-1008
FORD FIESTA P 1.0 & 1.5 DO DOHC 12V 16V M1JE,UEJD 9 2013 0 2016 AF2296-1002
FORD FIESTA WS P 1.4 4 MPFI DOHC 16V SPJ 1 2009 9 2010 AF2031-2995
FORD FIESTA WS P 1.6 4 MPFI DOHC 16V HXJ 1 2009 9 2010 AF2031-2995
FORD FIESTA WS TD 1.6 4 DI DOHC 16V HHJ 11 2009 9 2010 AF2031-2995
FORD FIESTA WT TD 1.6 4 DI DOHC 16V HHJ 10 2010 2 2012 AF2031-2995
FORD FIESTA WT P 1.6 4 MPFI DOHC 16V HXJ 10 2010 8 2013 AF2031-2995
FORD FIESTA WZ P 1.6 4 DI DOHC 16V JTJA 8 2013 0 2018 AF2031-2995
FORD FIESTA WZ P 1.0 3 DI DOHC 12V M1JE 9 2013 0 2018 AF2296-1002 AF2031-2995
FORD FIESTA WZ P 1.5 4 DI DOHC 16V UEJD 9 2013 0 2018 AF2296-1002 AF2031-2995
FORD FOCUS LS P 2.0 4 MPFI DOHC 16V C3-ZETEC 6 2005 0 2007 AF2296-1002
FORD FOCUS LT TD 2.0 4 MPFI DOHC 16V G6DD 7 2007 3 2009 AF2031-2993
FORD FOCUS LV P 2.0 4 MPFI DOHC 16V A0DA 4 2009 6 2011 AF2031-2993
FORD FOCUS LV TD 2.0 4 DI DOHC 16V G6DG 4 2009 6 2011 AF2031-2993
FORD FOCUS LW P 1.6 4 MPFI DOHC 16V DURATEC 8 2011 7 2012 AF2031-2993
FORD FOCUS LW P 2.0 4 MPFI DOHC 16V DURATEC 8 2011 7 2012 AF2296-1002 AF2031-2993
FORD FOCUS LW TD 2.0 4 DI DOHC 16V DURATORQ 8 2011 7 2012 AF2031-2993
FORD FOCUS LW II P 1.6 4 MPFI DOHC 16V DURATEC 8 2012 0 2018 AF2031-2993
FORD FOCUS LW II P 2.0 4 DI DOHC 16V DURATEC 8 2012 0 2018 AF2296-1002 AF2031-2993
FORD FOCUS LW II TD 2.0 4 DI DOHC 16V DURATORQ 8 2012 0 2018 AF2031-2993
FORD FOCUS LW II ST P 2.0 4 DI DOHC 16V ECOBOOST 10 2012 0 2018 AF2296-1002 AF2031-2993
FORD FOCUS LZ P 2.0 4 DI DOHC 16V ECOBOOST 1 2016 0 2018 AF2296-1002 AF2031-2993
FORD FOCUS LZ P 2.3 4 DI DOHC 16V 2.3T 1 2016 0 2018 AF2296-1002 AF2031-2993
FORD FPV P 5.4 V8 BA,BF FPV GT, GTP,
SUPER PURSUIT 3 2003 1 2008 AF2296-2010 AF2041-0945
FORD FPV P 4.0 BARRA BA,BF F6 TYPHOON,
TORNADO UTE 10 2004 10 2006 AF2296-2010 AF2031-2852
FORD KA P 1.3 OHV 8V J4KD 10 1999 0 2003 AF2296-1002
FORD KUGA TF P 1.6 4 DI DOHC 16V ECOBOOST 4 2013 1 2015 AF2041-2993
FORD KUGA TF TD 2.0 4 DI DOHC 16V DURATORQ 4 2013 1 2018 AF2041-2993
FORD KUGA TF P 1.5 4 DI DOHC 16V JTMA, WPMA 1 2015 1 2018 AF2041-2993
FORD KUGA TF P 2.0 4 DI DOHC 16V ECOBOOST 1 2015 1 2018 AF2041-2993
FORD LASER P 1.3,1.5,1.6 & 1.8 CARB EFI E3,E5,B6,BP 0 1981 4 2001 AF2296-1004

116 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

FORD LTD P 4.1 & 5.8 OHV 16V FC250,351C 6 1979 0 1982 AF2296-3001
FORD LTD P 4.0 & 5.0 MPFI SOHC 12V DC,DF,DL 8 1991 0 2003 AF2296-3001 AF2031-2015
FORD LTD P 5.4 V8 MPFI SOHC BA,BF 6 2003 0 2007 AF2296-2010 AF2031-2852
FORD METEOR P 1.5 & 1.6 CARB EFI GA,GB,GC 4 1982 0 1987 AF2296-1004
FORD MONDEO P 2.5 MPFI DOHC 24V KL 2 2000 0 2001 AF2296-2010
FORD MONDEO P 2.0 & 2.3 MPFI DOHC 16V 23NS,ECOBOOST 10 2007 0 2016 AF2296-1002
FORD MUSTANG P 289 & 302 WINDSOR 0 1962 0 1995 AF2296-3001
FORD MUSTANG P 4.6 MODULAR & 5.0 COYOTE 0 1996 0 2016 AF2296-2010
FORD MUSTANG FM P 2.3 4 DI DOHC 16V ECOBOOST 7 2015 0 2018 AF2296-1002
FORD PROBE P 2.5 MPFI DOHC 24V ST,SU,SV 6 1994 0 1998 AF2296-1010
FORD RAIDER P 2.6 UV 8 1991 0 1997 AF2296-1010
FORD RANGER TD 2.5 & 3.0 MPFI 16V PJ,PK 12 2006 8 2011 AF2296-1002 AF2041-2296
FORD RANGER P 2.5 MPFI DOHC 16V PX 9 2011 0 2016 AF2296-1002 AF2041-0662
FORD RANGER TD 2.2 & 3.2 DI DOHC 16V 20V PX 9 2011 0 2016 AF2041-0662
FORD TAURUS P 3.0 MPFI DOHC 24V DN,DP 3 1996 0 1998 AF2296-2010
FORD TE50 P 4.9 V8 w/ Oil Cooler AU,AUII 10 1999 12 2002 AF2296-2004 AF2031-2015
FORD TE50 P 4.9 V8 without Oil Cooler AU,AUII 10 1999 12 2002 AF2296-3001 AF2031-2015
FORD TE50 P 5.6 V8 AU,AUII 12 2001 12 2002 AF2296-2004 AF2031-2080
FORD TELSTAR P 2.5 MPFI DOHC 24V AX,AY 1 1992 0 1996 AF2296-1010
FORD TERRITORY P 4.0 BARRA MPFI DOHC 24V SX 2WD,SX AWD 6 2004 0 2005 AF2296-3001 AF2031-2852
FORD TERRITORY P 4.0 BARRA MPFI DOHC 24V SY 2WD,SY AWD,Turbo 10 2005 3 2008 AF2296-2010 AF2031-2852
FORD TERRITORY P 4.0 BARRA MPFI DOHC 24V SY AWD Turbo, SY 2WD,SY AWD,
SZ 2WD,SZ AWD 2 2008 0 2016 AF2296-2010 AF2031-2950
FORD TERRITORY TD 2.7 MPFI DOHC 24V SZ 2WD,SZ AWD 5 2011 0 2016 AF2031-2950

AIR & OIL FILTER APPLICATION GUIDE

FORD TL50 P 4.9 V8 w/ Oil Cooler AU,AUII 10 1999 12 2002 AF2296-2004 AF2031-2015
FORD TL50 P 4.9 V8 without Oil Cooler AU,AUII 10 1999 12 2002 AF2296-3001 AF2031-2015
FORD TL50 P 5.6 V8 AU,AUII 12 2001 12 2002 AF2296-2004 AF2041-0945
FORD TRANSIT VAN P 2.0 EFI VG 1 1996 11 2000 AF2296-2004
FORD TS50 P 4.9 V8 w/ Oil Cooler AU,AUII 10 1999 12 2002 AF2296-2004 AF2031-2015
FORD TS50 P 4.9 V8 without Oil Cooler AU,AUII 10 1999 12 2002 AF2296-3001 AF2031-2015
FORD TS50 P 5.6 V8 AU,AUII 12 2001 12 2002 AF2296-2004 AF2041-0945
GEELY
GEELY MK P 1.5 MPFI DOHC 16V MR479Q 1 2011 0 2015 AF2296-1003
GMC
GMC 3500 P 5.7 MPFI 0 1998 0 2015 AF2296-3002
GMC 3500 TD 6.5 1 1998 0 2015 AF2296-3002
GREAT WALL
GREAT WALL SA220 P 2.2 491QE 7 2009 0 2015 AF2296-1003
GREAT WALL V200 TD 2.0 DI DOHC 8V GW4D20 9 2011 0 2015 AF2296-2010
GREAT WALL V240 P 2.4 4G69S4N 7 2009 2 2015 AF2296-1004
GREAT WALL X200 TD 2.0 DI DOHC 8V GW4D20 2 2012 0 2015 AF2296-2010
GREAT WALL X240 P 2.4 4G69S4N 7 2009 0 2015 AF2296-1004
HOLDEN
HOLDEN ADVENTRA P 5.7 MPFI LS1 10 2003 1 2006 AF2296-1007 AF2031-2116
HOLDEN ADVENTRA P 3.6 MPFI DOHC 24V ALLOYT190,
ALLOYT188,
ALLOYT195 3 2005 0 2007 AF2031-2116
HOLDEN APOLLO P 2.0 & 2.2 MPFI DOHC 16V 3SFC,3SFE,5SFE 8 1989 0 1997 AF2296-1003
HOLDEN APOLLO P 3.0 MPFI DOHC 24V 3VZ-FE 3 1993 0 1997 AF2296-1002
HOLDEN ASTRA P 1.5 & 1.6 E15,E16 8 1984 7 1987 AF2296-2008
HOLDEN ASTRA P 1.6,1.8 & 2.0 MPFI DOHC 16V 16LF,18LE,C16,C18,X18,
X20,Z18,Z20 7 1987 3 2010 AF2296-2001
HOLDEN BARINA P 1.3 MPFI SOHC 8V G13A,G13B 2 1985 0 1994 AF2296-1002
HOLDEN BARINA P 1.2,1.4,1.6 & 1.8 MPFI DOHC C12,C14,C16,X16,Z14,Z18,
F16D3 4 1994 2 2011 AF2296-2001
HOLDEN BELMONT P 1 1968 0 1977 AF2296-2003
HOLDEN CALIBRA P 2.0 & 2.5 MPFI DOHC 16V C20,X20,C25 10 1991 7 1998 AF2296-1001 AF2031-2080
HOLDEN CAMIRA P 1.6,1.8 & 2.0 MPFI SOHC 16JH,18JH,18JU,20JD 8 1982 0 1989 AF2296-1001
HOLDEN CAPTIVA P 2.4 MPFI DOHC 16V F18D4 11 2009 1 2011 AF2296-1001
HOLDEN CAPTIVA P 3.0 DI DOHC 24V LF1 2 2011 0 2015 AF2296-1017
HOLDEN COLORADO P 2.5 MPFI SOHC 8V Y24SE 7 2008 11 2008 AF2296-1001 AF2031-2951
HOLDEN COLORADO P 3.6 MPFI DOHC 24V HFV6 7 2008 5 2012 AF2031-2951

aeroflowperformance.com 117
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

HOLDEN COLORADO TD 3.0 DI DOHC 16V 4JJ1 7 2008 5 2015 AF2031-2013

HOLDEN COMBO VAN P 1.4 & 1.6 MPFI DOHC 16V C14NZ,Z14,Z16 3 1996 0 2015 AF2296-1001
HOLDEN COMMODORE VB-VL P 2.8,3.3,4.1,5.0 OHV HOLDEN V6,253-308 11 1978 8 1988 AF2296-2003
HOLDEN COMMODORE VE P 3.6 MPFI DOHC 24V V6 SIDI,LFX,LWR.LLT 8 2008 4 2013 AF2031-2919
HOLDEN COMMODORE VE-VF P 6.0 MPFI OHV 16V L98,L76,L77 8 2006 0 2015 AF2296-1017 AF2031-2919
HOLDEN COMMODORE VL P 3.0 MPFI SOHC 12V RB30E 3 1986 8 1988 AF2296-2008 AF2031-2031
HOLDEN COMMODORE VN-VY P 3.8 OHV V6 8 1988 10 2000 AF2296-1001 AF2031-2031
HOLDEN COMMODORE VN-VY P 5.0,5.7 & 6.0 MPFI V8 308,LS1 3 1989 7 2006 AF2296-1007 AF2031-2116
HOLDEN CRUZE P 1.5 MPFI DOHC 16V M15A 6 2002 6 2006 AF2296-1002
HOLDEN FRONTERA P 2.0 & 2.2 MPFI DOHC 16V X20,X22 10 1995 0 2002 AF2296-1001
HOLDEN FRONTERA P 3.2 MPFI DOHC 24V 6VD1 3 1999 0 2004 AF2296-1004
HOLDEN JACKAROO P 2.6,3.2 & 3.5 MPFI DOHC 24V 4ZE1,6VD1,6VE1 1 1990 0 2004 AF2296-1004
HOLDEN KINGSWOOD P 307,327,350 0 1968 12 1974 AF2296-3002
HOLDEN KINGSWOOD P 253,308 0 1969 12 1984 AF2296-2003
HOLDEN MANTA P 5.0 OHV VU 4 1995 0 1999 AF2296-1007 AF2031-2031
HOLDEN NOVA P 1.4,1.6 & 1.8 DOHC 6AF,4AFC,4AFE,7AFE 8 1989 0 1997 AF2296-1003
HOLDEN RODEO P 2.3,2.6 & 3.2 MPFI DOHC 24V 4ZD1,4ZE1,6VD,6VD1 1 1987 0 2003 AF2296-1004
HOLDEN RODEO P 2.2 MPFI SOHC 8V C22NE 6 1988 2 2003 AF2296-1001
HOLDEN RODEO TD 3.0 OHV 4JH1TC 1 2002 0 2003 AF2041-2023
HOLDEN RODEO P 2.4 MPFI SOHC 8V C24SE,Y24SE 1 2003 0 2008 AF2296-1001 AF2031-2951
HOLDEN RODEO P 3.5 MPFI DOHC 24V 6VE1 3 2003 0 2005 AF2296-1004 AF2031-2951
HOLDEN RODEO TD 3.0 OHV 4JH1TC 3 2003 0 2008 AF2296-1003 AF2041-2023
HOLDEN SCURRY P 1.0 CARB F10A 7 1985 0 1987 AF2296-1002
HOLDEN SUBURBAN 1500 P 5.7 OHV VORTEC 2 1998 1 2001 AF2296-1001
AIR & OIL FILTER APPLICATION GUIDE

HOLDEN SUBURBAN 2500 P 6.5 OHV FCWG 2 1998 0 2001 AF2296-3002

HOLDEN SUNBIRD P 1.9 19S 11 1976 0 1978 AF2296-1001
HOLDEN SUNBIRD P 1.9 STARFIRE 9 1978 0 1980 AF2296-2003
HOLDEN TIGRA P 1.8 MPFI DOHC 16V Z18XE 10 2005 0 2007 AF2296-1001
HOLDEN TORANA P 1.6,1.8 & 1.9 11 1969 0 1976 AF2296-1002
HOLDEN TORANA P 2.3,2.6,2.8,3.0,4.2 & 5.0 11 1969 0 1979 AF2296-2003
HOLDEN VECTRA P 2.0,2.2 & 2.5 MPFI DOHC 16V C20,X25,C22 6 1997 0 2003 AF2296-1001
HOLDEN VIVA P 1.8 MPFI DOHC 16V F18D3 10 2005 5 2009 AF2296-1001
HOLDEN VXR P 2.0 MPFI DOHC 16V Z20LER 10 2006 9 2009 AF2296-1001
HONDA
HONDA ACCORD P 2.0,2.2 & 3.0 MPFI SOHC 24V A20A,F22A,F22B,J30 1 1986 0 1999 AF2296-1004
HONDA ACCORD P 2.3,2.4,3.0 & 3.5 MPFI DOHC F23,J30,K24,J35 12 1997 0 2015 AF2296-2010
HONDA ACCORD 40 SERIES P 3.0 V6 MPFI SOHC 24V J30A4 8 2003 1 2008 AF2296-1010
HONDA ACCORD 40 SERIES P 2.4 4 MPFI DOHC 16V K24A4 9 2003 1 2008 AF2296-1010 AF2031-2276
HONDA ACCORD 50 SERIES P 2.4 4 MPFI SOHC 16V K24Z2 2 2008 5 2013 AF2296-1010
HONDA ACCORD 50 SERIES P 3.5 V6 MPFI SOHC 24V J35Z2 2 2008 5 2013 AF2296-1010
HONDA ACCORD 9TH GEN P 2.4 4 MPFI DOHC 16V K24W3 6 2013 0 2018 AF2296-1010
HONDA ACCORD 9TH GEN P 3.5 V6 MPFI DOHC 24V J35Y3 6 2013 0 2018 AF2296-1010
HONDA ACCORD CA P 2.0 4 SOHC 12V A20A2 & A20A4 1 1986 0 1989 AF2296-1004
HONDA ACCORD CB & CD P 2.2 4 SOHC 16V F22A5 , F22B1 , F22B3 11 1986 12 1997 AF2296-1004
HONDA ACCORD CG P 3.0 V6 MPFI SOHC 24V J30A1 12 1997 0 1999 AF2296-1004
HONDA ACCORD CG P 2.3 4 SOHC 16V F23A1 12 1997 2 2002 AF2296-1010
HONDA ACCORD CK P 3.0 V6 MPFI SOHC 24V J30A1 1 1999 0 2003 AF2296-1010
HONDA ACCORD CK VTI P 2.3 4 MPFI SOHC 16V F23Z2 1 1999 0 2003 AF2296-1010
HONDA ACCORD CL & CM P 2.4 4 MPFI DOHC 16V K24A3 6 2003 1 2008 AF2296-1010 AF2031-2276
HONDA ACCORD CM P 3.0 V6 MPFI SOHC 16V J30A4 6 2003 1 2008 AF2296-1010
HONDA ACCORD EURO P 2.4 MPFI DOHC 16V K24Z3 6 2003 0 2015 AF2296-1010
HONDA ACCORD EURO CL P 2.4 4 MPFI DOHC 16V K24A3 6 2003 5 2008 AF2296-1010 AF2031-2276
HONDA ACCORD EURO CU P 2.4 4 MPFI DOHC 16V K24A3 6 2008 0 2018 AF2296-1010
HONDA ACTY P 0.6 CARB EH 10 1986 0 1986 AF2296-1004
HONDA BEAT P IMPORT 0 1991 0 1994 AF2296-1008
HONDA CITY P 1.5 OHC L15A7-17 2 2009 0 2015 AF2296-1010
HONDA CIVIC P 1.3,1.5,1.6 & 1.7 SOHC 16V EW2,D15,D16,B16 10 1987 0 2000 AF2296-1004
HONDA CIVIC P 1.3,1.7,1.8 & 2.0 MPFI DOHC D17,L13,R18A,K20,LDA2,
LEA2,R18Z1,R20A5 10 2000 0 2015 AF2296-1010
HONDA CIVIC 10TH GEN P 1.5 4 DI DOHC 16V L15B7 6 2016 0 2018 AF2296-1010
HONDA CIVIC 10TH GEN P 1.8 4 MPFI DOHC 16V R18Z1 6 2016 0 2018 AF2296-1010 AF2031-2468
HONDA CIVIC 9TH GEN P 1.5 4 MPFI SOHC 16V LEA2 2 2012 7 2014 AF2296-1010
HONDA CIVIC 9TH GEN P 1.8 & 2.0 4 MPFI SOHC &
DOHC 1 R18Z1 & R20A5 2 2012 5 2016 AF2296-1010 AF2031-2468

118 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

HONDA CIVIC ED, EE , EG P 1.3 & 1.5 4 SOHC 16V & 12V D15BA & D13B2 10 1987 0 1995 AF2296-1004
HONDA CIVIC EG P 1.5 4 SOHC 16V D15B7 11 1993 9 1995 AF2296-1004
HONDA CIVIC EG & EH P 1.6 4 MPFI DOHC 16V D16A8 11 1987 10 1995 AF2296-1004
HONDA CIVIC EK & EM P 1.6 4 MPFI SOHC & DOHC 16V B16A2 , D16Y4 &
D16Y5 10 1995 0 2000 AF2296-1004
HONDA CIVIC ES H 1.3 4 MPFI SOHC 16V & 8V L13A1 & LDA 3 2004 1 2006 AF2296-1004
HONDA CIVIC ES9 P 1.7 4 MPFI DOHC 16V D17Z1 10 2000 0 2006 AF2296-1004
HONDA CIVIC EU P 1.7 4 MPFI DOHC & SOHC 16V D17A2 & D17A2 10 2000 0 2006 AF2296-1004
HONDA CIVIC FD P 1.3 4 MPFI SOHC 16V LDA2 2 2006 12 2011 AF2296-1004
HONDA CIVIC FD P 1.8 4 MPFI DOHC 16V R18A1 2 2006 12 2011 AF2296-1004 AF2031-2342
HONDA CIVIC FD P 2.0 4 MPFI DOHC 16V K20Z2 2 2006 12 2011 AF2296-1004
HONDA CIVIC FK P 1.8 4 MPFI SOHC 16V R18A2 0 2008 0 2018 AF2296-1004 AF2031-2342
HONDA CIVIC FN TYPE R P 2.0 4 MPFI DOHC 16V K20ZA 2 2007 0 2018 AF2296-1004
HONDA CONCERTO P 1.6 MPFI SOHC 16V D16 11 1988 0 1993 AF2296-1004
HONDA CRV P 2.0 MPFI DOHC 16V B20B3 9 1997 12 2001 AF2296-1004
HONDA CRV P 2.0 & 2.4 MPFI DOHC 16V K24,R20 12 2001 0 2015 AF2296-1010
HONDA CRX P 1.6 MPFI DOHC 16V D16A8,B16A2 11 1987 9 1998 AF2296-1004
HONDA CRZ H 1.5 MPFI SOHC 16V LEA3 11 2011 0 2015 AF2296-1010
HONDA HRV P 1.6 MPFI SOHC 16V D16W1 1 1999 0 2002 AF2296-1004
HONDA HRV P 1.6 MPFI SOHC 16V D16W1 2 2000 0 2002 AF2296-1010
HONDA INSIGHT H 1.0 MPFI SOHC 12V MF2,ECA1 3 2001 6 2004 AF2296-1008
HONDA INSIGHT H 1.3 MPFI DOHC 16V LDA3 10 2010 5 2012 AF2296-1010
HONDA INSIGHT P 1.3 DI SOHC 8V LDA3 6 2012 0 2015 AF2296-1010
HONDA INTEGRA P 1.8 & 2.0 MPFI DOHC 16V B18,K20 6 1989 0 2004 AF2296-1004

AIR & OIL FILTER APPLICATION GUIDE

HONDA INTEGRA P 2.0 MPFI DOHC 16V K20 8 2001 4 2007 AF2296-1010
HONDA JAZZ P 1.3 & 1.5 MPFI SOHC 16V L13,L15,LDA3 10 2002 0 2015 AF2296-1010
HONDA LEGEND P 3.5 MPFI SOHC 24V C35A3 5 1996 0 2004 AF2296-1004
HONDA LEGEND P 3.5 & 3.7 MPFI SOHC 24V C35A3,J35A8,J37A2 2 2002 0 2015 AF2296-1010
HONDA MDX P 3.5 MPFI J35A5 4 2003 4 2007 AF2296-1010
HONDA NSX P 3.0 MPFI DOHC 24V C30A3 5 1995 2 2002 AF2296-1004
HONDA NSX P 3.0 MPFI DOHC 24V C30A3 2 2002 1 2005 AF2296-1010
HONDA ODYSSEY P 2.2 & 2.3 MPFI SOHC 16V F22,F23 6 1995 3 2000 AF2296-1004
HONDA ODYSSEY P 2.3,2.4 & 3.0 MPFI DOHC 16V F23,J30A3,K24 3 2000 0 2015 AF2296-1010
HONDA PRELUDE P 2.0,2.2 & 2.3 MPFI DOHC 16V A20,B20,F22,H22,H23 12 1985 0 2002 AF2296-1004
HONDA PRELUDE P 2.2 MPFI H22A4 2 2002 7 2002 AF2296-1010
HONDA S2000 P 2.0 MPFI DOHC 16V F20C1 8 1999 0 2006 AF2296-1010
HONDA S2000 P 2.0 MPFI DOHC 16V F20C2 2 2006 7 2009 AF2296-1004
HSV
HSV CLUBSPORT P 6.0 & 6.2 MPFI OHV 16V LS2,LS3 8 2006 0 2015 AF2296-1017 AF2031-2919
HSV GRANGE P 6.0 & 6.2 MPFI OHV 16V LS2,LS3 3 2007 8 2009 AF2296-1017 AF2031-2919
HSV GRANGE P 6.0 MPFI OHV 16V LS3 9 2010 0 2015 AF2296-1017
HSV GTS P 6.0 & 6.2 MPFI OHV 16V LS2,LS3 8 2006 8 2009 AF2296-1017 AF2031-2919
HSV MALOO P 6.0 & 6.2 MPFI OHV 16V LS2,LS3 10 2007 0 2015 AF2296-1017 AF2031-2919
HSV SENATOR P 6.0 & 6.2 MPFI OHV 16V LS3 8 2006 0 2015 AF2296-1017 AF2031-2919
HUMMER
HUMMER H2 P 6.0 0 2002 0 2007 AF2296-1017
HYUNDAI
HYUNDAI ACCENT P 1.5 & 1.6 MPFI DOHC 16V G4ECX,G4ED,G4ED5,
G4FC,G4FD 6 2000 9 2015 AF2296-1004
HYUNDAI COUPE P 2.0 MPFI DOHC 16V G4GFT 7 1996 0 1999 AF2296-1004
HYUNDAI ELANTRA P G4GB,G4GBX,G4GCX,G4GC6,G4NBB 10 2000 0 2015 AF2296-1004
HYUNDAI ELANTRA AD P 2.0 4 MPFI DOHC 16V 2.0 MPI 10 2016 0 2018 AF2296-1004
HYUNDAI ELANTRA MD P 1.8 4 MPFI DOHC 16V G4NBB 6 2011 0 2018 AF2296-1004 AF2031-2451
HYUNDAI ELANTRA SR AD P 1.6 4 DI DOHC 16V G4FJ 10 2016 0 2018 AF2296-1004
HYUNDAI ELANTRA XD & HD P 1.8 & 2.0 4 MPFI DOHC 16V G4GC & G4GBX 10 2000 5 2011 AF2296-1004
HYUNDAI EXCEL P 1.5 MPFI DOHC 16V G4EKR,G4FKR 9 1994 0 2000 AF2296-1004
HYUNDAI GETZ P 1.3,1.4,1.5 & 1.6 MPFI DOHC 16 G4EA1,G4EE5,G4EC2,
G4ED5 9 2002 0 2015 AF2296-1004
HYUNDAI GRANDEUR P 3.0 MPFI DOHC 24V G6CTX 9 1999 0 2003 AF2296-1004
HYUNDAI I20 P 1.4 & 1.6 MPFI DOHC 16V G4FA,G4FC 7 2010 0 2015 AF2296-1004
HYUNDAI I30 FD P 1.6 & 2.0 MPFI DOHC 16V G4GC 9 2007 0 2018 AF2296-1004
HYUNDAI I30 GD P 1.6 & 1.8 MPFI & DI DOHC 16V G4NB & G4FD 5 2012 0 2018 AF2296-1004 AF2031-2451
HYUNDAI I40 P 2.0 DI DOHC 16V G4NC 9 2011 2 2014 AF2296-1004

aeroflowperformance.com 119
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

HYUNDAI I45 P 2.0 & 2.4 MPFI DOHC 16V G4KD,G4KC4 5 2010 0 2015 AF2296-1004
HYUNDAI ILOAD P 2.4 MPFI DOHC 16V G4KG8 2 2008 0 2015 AF2296-1004
HYUNDAI IMAX P 2.4 MPFI DOHC 16V G4KG8 2 2008 0 2015 AF2296-1004
HYUNDAI IX35 P 2.0 & 2.4 MPFI DOHC 16V G4KD,G4NC,G4KE,G4KJ 2 2010 0 2015 AF2296-1004 AF2031-2451
HYUNDAI LANTRA P 1.6,1.8 & 2.0 MPFI DOHC 16V G4CRL,G4GMR,G4GFV 5 1991 0 2000 AF2296-1004
HYUNDAI S COUPE P 1.5 MPFI G4DJ,G4EKM,
G4EKT2,G4FKM 0 1990 3 1996 AF2296-1004
HYUNDAI SANTA FE P 2.2,2.4 & 2.7 MPFI DOHC 24V G4JSX,G6EAY,G4KJ 11 2000 0 2015 AF2296-1004
HYUNDAI SANTE FE P 2.7 MPFI DOHC 24V G6EA5 5 2006 10 2009 AF2296-1010
HYUNDAI SONATA P 2.0,2.4,2.5 & 3.0 MPFI DOHC G6AT,G4CPP,G6ATP,G6ATS,
G4JPV,G6BVV,G4JSY,G6BAY,
G4KC 3 1990 4 2010 AF2296-1004
HYUNDAI TERRACAN P 3.5 MPFI DOHC 24V G6CU 12 2001 7 2008 AF2296-1004
HYUNDAI TIBURON P 2.0 & 2.7 MPFI DOHC 24V G4GC1,G6BA,G6BA10 2 2002 0 2015 AF2296-1004
HYUNDAI TRAJET P 2.7 MPFI DOHC 24V G6BAX 7 2000 0 2015 AF2296-1004
HYUNDAI TUCSON P 2.0 & 2.7 MPFI DOHC 24V G4GC,G6BA3 8 2004 1 2010 AF2296-1004
HYUNDAI VELOSTER P 1.6 MPFI DOHC 16V G4FD,G4FJ 2 2012 0 2015 AF2296-1004
INFINITI
INFINITI FX37 P 3.7 MPFI DOHC 24V VQ37 7 2012 12 2013 AF2296-1008
INFINITI FX50 P 5.0 MPFI DOHC 32V VK50 7 2012 12 2013 AF2296-1010
INFINITI M35H P 3.5 MPFI DOHC 24V VQ35 7 2012 12 2013 AF2296-1008
INFINITI M37 P 3.7 MPFI DOHC 24V VQ37 7 2012 12 2013 AF2296-1008
ISUZU
ISUZU D-MAX TD 3.0 DI DOHC 16V 4JJ1 10 2008 5 2012 AF2031-2013
AIR & OIL FILTER APPLICATION GUIDE

ISUZU MU P 2.6 MPFI 4ZE1 0 1989 0 1993 AF2296-1004

IVECO
IVECO DAILY TD 2.3 & 3.0 DOHC 16V F1A,F1AAE0481,
F1CE0481 0 2005 0 2015 AF2296-2010
JEEP
JEEP CHEROKEE P 2.4 MPFI OHV 12V MX 4 1994 8 2001 AF2296-2004
JEEP CHEROKEE P 2.4 MPFI DOHC 16V 4W 2 2004 1 2006 AF2296-1002
JEEP CJ P 2.5 & 4.2 B,C,B8 9 1978 0 1985 AF2296-2003
JEEP COMMANDER P 4.7 & 5.7 MPFI SOHC 16V 8N 5 2006 3 2010 AF2296-2004
JEEP COMPASS P 2.0 & 2.4 MPFI DOHC 16V AC,BD,8D 3 2007 0 2015 AF2296-1017
JEEP GRAND CHEROKEE P 4.0,4.7,5.7 & 6.1 MPFI OHV 16V 508MX,MX,8N,5Y5,5Y 3 1996 12 2010 AF2296-2004
JEEP GRAND CHEROKEE SRT P 5.7 & 6.4 MPFI DOHC 16V HEMI,JC HEMI 1 2011 0 2015 AF2296-2010
JEEP HAWKE P 0 1979 0 1986 AF2296-2003
JEEP J20 P 7 1981 0 1985 AF2296-2003
JEEP LAREDO P 0 1979 0 1986 AF2296-2003
JEEP OVERLANDER P 0 1979 0 1986 AF2296-2003
JEEP PATRIOT P 2.0 & 2.4 MPFI DOHC 16V 8D 8 2007 0 2015 AF2296-1017
JEEP RENEGADE P 0 1979 0 1986 AF2296-2003
JEEP SPORTSMAN P 0 1979 0 1986 AF2296-2003
JEEP WAGONEER P 0 1979 0 1986 AF2296-2003
JEEP WRANGLER P 4.0 MPFI OHV 12V MX 10 1996 2 2007 AF2296-2004
JEEP WRANGLER P 3.8 MPFI OHV 12V 7L 3 2007 12 2011 AF2296-1002
KIA
KIA CARENS WAGON P 1.8 MPFI DOHC 16V TE,T8 7 2000 0 2002 AF2296-1008
KIA CARNIVAL P 2.5 MPFI DOHC 24V K5 9 1999 0 2006 AF2296-1010
KIA CARNIVAL P 2.7 SWB K5 10 2006 4 2011 AF2296-1004
KIA CERATO P 1.8 & 2.0 MPFI DOHC 16V G4GC,G4KD,G4NB,
G4FJ,G4NC 7 2004 0 2015 AF2296-1004
KIA GRAND CARNIVAL TD 2.2 DI DOHC 16V D4HH 6 2011 0 2015 AF2296-1004
KIA MAGENTIS P 2.4 & 2.7 MPFI DOHC 24V G4KC,G6EA 8 2006 3 2010 AF2296-1004
KIA MENTOR P 1.5 & 1.8 MPFI DOHC 16V B5,BF-E,TE 12 1996 6 2000 AF2296-1008
KIA OPTIMA P 2.4,2.5 & 2.7 MPFI DOHC 24V K5,G6BV,G6BA,G4KJ 6 2000 0 2018 AF2296-1004
KIA PRO_CEE’D P 1.6 DI DOHC 16V G4FJ 3 2014 0 2015 AF2296-1004
KIA RIO P 1.5 MPFI DOHC 16V B5,A5D 7 2000 0 2005 AF2296-1010
KIA RIO P 1.4 & 1.6 MPFI DOHC 16V G4EE,G4ED,G4FA,G4FD 1 2003 0 2015 AF2296-1004
KIA RONDO P 2.0 MPFI DOHC 16V G4KA8,G4NC 4 2008 0 2015 AF2296-1004
KIA SHUMA P 1.8 MPFI DOHC 16V TE 4 2000 0 2001 AF2296-1008
KIA SORENTO P 2.4,3.5 & 2.8 MPFI DOHC 24V G6CU,G6DA,G4KE9 2 2003 7 2011 AF2296-1004
KIA SOUL P 1.6 & 2.0 MPFI DOHC 16V G4FC,G4NA 4 2009 0 2015 AF2296-1004

120 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

KIA SPECTRA P 1.8 MPFI DOHC 16V TE 5 2001 6 2004 AF2296-1008

KIA SPORTAGE P 2.0,2.4 & 2.7 MPFI DOHC 16V G4GC,G6BA,D4HA,
G4KD,G4KE 4 2005 5 2014 AF2296-1004
KIA SPORTAGE KM P 2.7 V6 MPFI DOHC 16V G6BA 4 2005 8 2009 AF2296-1004
KIA SPORTAGE KM P 2.0 4 MPFI DOHC 16V G4GC 8 2007 7 2010 AF2296-1004
KIA SPORTAGE QL P 2.0 4 MPFI DOHC 16V G4NA 1 2016 0 2018 AF2296-1004
KIA SPORTAGE QL P 2.4 4 DI DOHC 16V G4KJ 1 2016 0 2018 AF2296-1004
KIA SPORTAGE SL P 2.0 4 MPFI DOHC 16V G4KD 8 2010 5 2013 AF2296-1004 AF2031-2451
KIA SPORTAGE SL P 2.4 4 MPFI DOHC 16V G4KE 8 2010 5 2013 AF2296-1004 AF2031-2451
KIA SPORTAGE SL TD 2.0 4 DI DOHC 16V D4HA 8 2010 5 2013 AF2296-1004 AF2031-2451
KIA SPORTAGE SL II P 2.0 4 MPFI DOHC 16V G4KD 6 2013 5 2014 AF2296-1004 AF2031-2451
KIA SPORTAGE SL II TD 2.0 4 DI DOHC 16V G4KE 6 2013 0 2018 AF2031-2451
KIA SPORTAGE SL II P 2.0 4 DI DOHC 16V G4NC 5 2014 0 2018 AF2296-1004 AF2031-2451
LADA
LADA CEVARO P 1.5 0 1990 3 1993 AF2296-2004
LADA NIVA P 1.6 CARB EFI 5M,5MI 7 1983 0 1995 AF2296-2004
LADA SABLE P 1.5 CARB 1 1994 0 1996 AF2296-2004
LADA SAMARA P 1.3 12 7 1988 0 1991 AF2296-2004
LADA VOLANTE P 1.5 CARB 12 1993 0 1996 AF2296-2004
LANDROVER
LANDROVER DEFENDER P 3.5 CARB OHV 16V 17G 0 1984 0 1991 AF2296-3001
LANDROVER DEFENDER TD 2.5 0 1991 3 1999 AF2296-2004
LANDROVER DISCOVERY TD 2.5 OHV 8V 12L,18L 0 1991 0 1999 AF2296-2004
LANDROVER DISCOVERY P 3.5,3.9 & 4.0 MPFI OHV 16V 22D,23D,22L55D,56D 4 1991 0 2005 AF2296-2004

AIR & OIL FILTER APPLICATION GUIDE

LANDROVER FREELANDER P 2.0 DI DOHC 16V 10 2012 0 2015 AF2296-1002
LANDROVER RANGE ROVER P 3.5 MPFI 7 1977 1 1989 AF2296-3001
LANDROVER RANGE ROVER P 4.0 & 4.6 MPFI OHV 16V 38D,44D,48D 12 1989 7 2002 AF2296-2004
LANDROVER RANGE ROVER EVOQUE P 2.0 DI DOHC 16V 204PT 10 2011 0 2015 AF2296-1002
LEXUS
LEXUS ES300 P 3.0 MPFI DOHC 24V 3VZ-FE,1MZ-FE 5 1992 0 2005 AF2296-1002
LEXUS GS300 P 3.0 MPFI DOHC 24V 2JZ-GE 10 1997 0 2005 AF2296-1002
LEXUS GS430 P 1.3 MPFI DOHC 32V 3UZ-FE 8 2005 2 2008 AF2296-1002
LEXUS IS200 P 2.0 MPFI DOHC 24V 1G-FE 3 1999 10 2005 AF2296-1002
LEXUS IS300 P 3.0 MPFI DOHC 24V 2JZ-GE 9 2001 0 2005 AF2296-1002
LEXUS LS400 P 4.0 MPFI DOHC 32V 1UZ-FE 4 1990 11 2000 AF2296-1002
LEXUS LS430 P 4.3 MPFI DOHC 32V 3UZ-FE 12 2000 0 2007 AF2296-1002
LEXUS LX470 P 4.7 MPFI DOHC 32V 2UZ-FE 5 1998 3 2008 AF2296-1002 AF2041-2444
LEXUS NX200T AGZ10R & AGZ15R P 2.0 4 DI DOHC 16V 8AR-FTS 2 2015 0 2018 AF2031-2443
LEXUS RX200T AGL20R P 2.0 4 DI DOHC 16V 8AR-FTS 9 2016 0 2018 AF2031-2443
LEXUS RX270T AGL20R P 2.7 4 DI DOHC 16V 1AR-FE 7 2013 8 2016 AF2031-2443
LEXUS RX330 P 3.3 MPFI DOHC 24V 3MZ-FE 4 2003 1 2006 AF2296-1002
LEXUS RX350 GGL15R P 3.5 V6 DI DOHC 24V 2GR-FE 2 2009 0 2015 AF2031-2443
LEXUS RX400H P 3.3 MPFI DOHC 24V 3MZ-FSE 9 2006 5 2009 AF2296-1002
LEXUS SC430 P 4.3 MPFI DOHC 32V 3UZ-FE 10 2001 7 2010 AF2296-1002
MAZDA
MAZDA 121 P 1.3 CARB B3 3 1987 0 1989 AF2296-1004
MAZDA 121 P 1.3 & 1.5 MPFI SOHC 16V B3,B5 1 1990 0 2003 AF2296-1008
MAZDA 2 P 1.5 MPFI DOHC 16V ZY 12 2002 0 2015 AF2296-1008
MAZDA 2 DJ P 1.5 4 DI DOHC 16V FP5 9 2014 0 2018 AF2296-1008
MAZDA 2 DJ P 1.5 4 DI DOHC 16V V-P5 11 2014 0 2018 AF2296-1008
MAZDA 2 DL P 1.5 4 DI DOHC 16V FP5 0 2016 0 2018 AF2296-1008
MAZDA 2 DY & DE P 1.5 4 MPFI DOHC 16V ZY 12 2002 11 2014 AF2296-1008
MAZDA 3 P 2.0,2.3 & 2.5 MPFI DOHC 16V LFDE,L3,L3 MZR,L5 SVT 1 2004 1 2014 AF2031-2293
MAZDA 3 TD 2.0 & 2.2 MPFI DOHC 16V RF,R2 8 2007 1 2014 AF2296-1004 AF2031-2293
MAZDA 3 P 2.0 & 2.5 MPFI DOHC 16V SKYDRIVE,LFVE,
SKYACTIV-G 9 2011 0 2015 AF2296-1008
MAZDA 3 BK P 2.0 4 MPFI DOHC 16V LFDE 1 2004 3 2009 AF2031-2293
MAZDA 3 BK TD 2.0 4 DOHC 16V RF 8 2007 9 2009 AF2296-1004 AF2031-2293
MAZDA 3 BK MPS P 2.3 4 TURBO L3 MZR 7 2006 5 2009 AF2031-2293
MAZDA 3 BK SP23 P 2.3 4 MPFI DOHC 16V L3 1 2004 3 2009 AF2031-2293
MAZDA 3 BL P 2.0 4 MPFI DOHC 16V LFDE 4 2009 1 2014 AF2031-2293
MAZDA 3 BL TD 2.2 4 SOHC R2 11 2009 1 2014 AF2296-1004 AF2031-2293
MAZDA 3 BL P 2.0 4 DI DOHC 16V SKYDRIVE 9 2011 1 2014 AF2296-1008 AF2031-2480

aeroflowperformance.com 121
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

MAZDA 3 BL MPS P 2.3 4 MPFI DOHC 16V L3 MZR 7 2009 1 2014 AF2031-2293
MAZDA 3 BL SP25 P 2.5 4 MPFI DOHC 16V L5 SVT 4 2009 1 2014 AF2031-2293
MAZDA 3 BM P 2.0 4 MPFI DOHC 16V LFVE 2 2014 0 2018 AF2296-1008 AF2031-2480
MAZDA 3 BM P 2.5 4 DI DOHC 16V SKYACTIV-G 2 2014 0 2018 AF2296-1008 AF2031-2480
MAZDA 3 BM TD 2.2 4 DI DOHC 16V SKYACTIV-D 8 2014 0 2018 AF2031-3024
MAZDA 323 P 1.3,1.5 & 1.6 CARB E3,E5,D5,B6,B6T 0 1980 0 1995 AF2296-1004
MAZDA 323 ASTINA P 1.8 EFI BP 10 1989 7 1994 AF2296-1004
MAZDA 323 ASTINA P 1.6,1.8 & 2.0 MPFI DOHC 16V BPD,B6,B6D,ZMD,
FPD,FSD 10 1989 0 2003 AF2296-1008
MAZDA 323 ASTINA P 2.0 MPFI DOHC 24V KF 7 1994 0 1998 AF2296-1010
MAZDA 323 PROTEGE P 2.0 MPFI DOHC 24V KF 7 1994 9 1998 AF2296-1010
MAZDA 323 PROTEGE P 1.6,1.8 & 2.0 MPFI DOHC 16V B6,BPD,ZMD,FPD,FSD 7 1994 0 2003 AF2296-1008
MAZDA 323 PROTEGE P 1.3,1.5,1.6 & 1.8 MPFI E3,E5,B6,B6T,BP 0 1997 0 1995 AF2296-1004
MAZDA 6 TD 2.0 & 2.2 MPFI DOHC 16V RF,R2 10 2006 11 2012 AF2296-1004
MAZDA 6 P 2.5 DI DOHC 16V SKYACTIV-G 12 2012 0 2015 AF2296-1008
MAZDA 6 GJ P 2.5 DI DOHC 16V SKYACTIV-G 12 2012 0 2018 AF2296-1008 AF2031-2480
MAZDA 6 GJ TD 2.2 DI DOHC 16V SKYACTIV-D 12 2012 0 2018 AF2031-3024
MAZDA 626 P 2.5 MPFI DOHC 24V KL 1 1992 6 1997 AF2296-1010
MAZDA 626 P 2.0 MPFI DOHC 16V FS 7 1997 8 2002 AF2296-1008
MAZDA 929 P 3.0 MPFI JE2 7 1991 11 1997 AF2296-1010
MAZDA B2500 TD 2.5 WL 6 2000 11 2006 AF2296-3001 AF2031-3024
MAZDA B2600 P 2.6 MPFI G6 4 1990 11 2006 AF2296-1010
MAZDA B4000 P 4.0 MPFI SOHC 12V 14V 9 2005 0 2006 AF2296-2010
MAZDA BT50 TD 2.5 & 3.0 MPFI DOHC 16V WL-AT,WE-AT 11 2006 10 2011 AF2041-2296
AIR & OIL FILTER APPLICATION GUIDE

MAZDA BT50 TD 2.2 & 3.2 DI DOHC 20V P4AT,P5AT 10 2011 0 2015 AF2041-0662
MAZDA CX-3 P 2.0 4 DI DOHC 16V SKYACTIV-G 3 2015 0 2018 AF2296-1008
MAZDA CX-5 P 2.0 & 2.5 DI DOHC 16V PE-VPS,SKYACTIV-G 2 2012 0 2015 AF2296-1008
MAZDA CX-5 P 2.0 4 DI DOHC 16V PE-VPS 2 2012 0 2018 AF2296-1008 AF2031-2480
MAZDA CX-5 TD 2.2 4 DI DOHC 16V SH-VPTS 2 2012 0 2018 AF2031-2480
MAZDA CX-5 P 2.5 4 DI DOHC 16V SKYACTIV-G 2 2013 0 2018 AF2296-1008 AF2031-2480
MAZDA CX-7 TD 2.2 R2 10 2009 0 2015 AF2296-1004
MAZDA E1300 EZYLOADER P 1.3 TC 0 1978 0 1986 AF2296-1004
MAZDA E1400 EZYLOADER P 1.5 D4 0 1978 0 1986 AF2296-1004
MAZDA E1800 EZYLOADER P 1.8 SOHC F8-E 2 2003 0 2006 AF2296-1008
MAZDA E2000 EZYLOADER P 2.0 SOHC FE 2 2003 0 2006 AF2296-1008
MAZDA EUNOS P 1.8,2.0,2.3 & 2.5 MPFI DOHC K8-ZE,KF-ZE,KJ,KL 6 1996 0 2000 AF2296-1010
MAZDA MILLENIA P 2.3 MPFI DOHC 24V KJ 10 2000 5 2002 AF2296-1008
MAZDA MPV P 3.0 MPFI DOHC 18V JE 9 1993 0 1999 AF2296-1010
MAZDA MPV P 2.5 & 3.0 MPFI DOHC 24V GY-DE,MZ,AJ 8 1999 0 2003 AF2296-2010
MAZDA MX-5 P 1.6 MPFI DOHC 16V B6-ZE 10 1989 11 1993 AF2296-1004
MAZDA MX-5 P 1.8 & 2.0 MPFI DOHC 16V BP-ZE,B8,BP-SVT 11 1993 8 2005 AF2296-1008
MAZDA MX-6 P 2.2 TURBO F28 10 1987 0 1991 AF2296-1008
MAZDA MX-6 P 2.5 MPFI DOHC 24V KL-ZE 11 1991 0 1997 AF2296-1010
MAZDA PREMACY P 1.8 & 2.0 MPFI DOHC 16V FP-DE,FS 2 2000 0 2003 AF2296-1008
MAZDA RX7 P 1.3 ROTARY TURBO 13B 2 1986 0 1992 AF2296-1004
MAZDA RX7 P 1.3 ROTARY TWIN TURBO 13BP 3 1992 0 1999 AF2296-1008
MAZDA RX8 P 1.3 RENESIS ROTARY 13B 7 2003 0 2015 AF2296-1008
MAZDA TRIBUTE P 3.0 MPFI DOHC 24V AJ 2 2001 1 2008 AF2296-2010
MERCEDES BENZ x2 means 2 filters are required
MERCEDES BENZ C230 W203 P 2.5 V6 MPFI DOHC 24V M272.920 x2 9 2005 1 2008 AF2031-2181
MERCEDES BENZ C280 & C300 W203 P 3.0 V6 MPFI DOHC 24V M272.947 x2 7 2007 5 2011 AF2031-2181
MERCEDES BENZ C320 W203 & CL203 P 3.2 V6 MPFI SOHC 18V M112.946 x2 11 2000 0 2005 AF2031-2181
MERCEDES BENZ C55 AMG W203 P 5.4 V8 MPFI SOHC 24V M113.990 x2 9 2004 6 2007 AF2031-2181
MERCEDES BENZ CL500 C215 P 5.0 V8 MPFI SOHC 24V M113.960 x2 3 2000 0 2007 AF2031-2181
MERCEDES BENZ CL55 C215 P 5.4 V8 MPFI DOHC 24V M113.986 x2 7 2001 2 2003 AF2031-2181
MERCEDES BENZ CLK240 C209 & A209 P 2.6 V6 MPFI SOHC 18V M112.912 x2 11 2002 0 2004 AF2031-2181
MERCEDES BENZ CLK280 C209 & A209 P 3.0 V6 MPFI DOHC 24V M272.940 x2 9 2005 6 2010 AF2031-2181
MERCEDES BENZ CLK320 C209 & A209 P 3.2 V6 MPFI SOHC 18V M112.955 x2 6 2002 6 2005 AF2031-2181
MERCEDES BENZ CLK350 C209 & A209 P 3.5 V6 MPFI SOHC 18V M272.960 x2 9 2005 2 2010 AF2031-2181
MERCEDES BENZ CLK500 C209 & A209 P 5.0 V8 MPFI SOHC 24V M113.968 x2 6 2002 0 2006 AF2031-2181
MERCEDES BENZ CLK500 C209 & A209 P 5.5 V8 MPFI SOHC 24V M273.967 x2 9 2006 2 2010 AF2031-2181
MERCEDES BENZ CLS350 W219 P 3.5 V6 MPFI DOHC 24V M272.964 x2 6 2005 5 2011 AF2031-2181
MERCEDES BENZ CLS500 W219 P 5.0 V8 MPFI SOHC 24V M113.967 x2 7 2005 5 2008 AF2031-2181

122 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

x2 means 2 filters are required

MERCEDES BENZ E280 W211 & S211 P 3.0 V6 MPFI DOHC 24V M272.943 &
M272.943 x2 9 2005 9 2009 AF2031-2181
MERCEDES BENZ E350 C207 P 3.5 V6 MPFI DOHC 24V M272.96 x2 7 2009 0 2018 AF2031-2181
MERCEDES BENZ E350 W211 & S211 P 3.5 V6 MPFI DOHC 24V M272.964 x2 3 2005 9 2009 AF2031-2181
MERCEDES BENZ E350 W212 P 3.5 V6 MPFI DOHC 24V M272.980 x2 7 2009 2 2011 AF2031-2181
MERCEDES BENZ E500 W211 & S211 P 5.0 V8 MPFI SOHC 24V M113.967 x2 8 2002 0 2006 AF2031-2181
MERCEDES BENZ E500 W211 & S211 P 5.5 V8 MPFI DOHC 32V M113.960 x2 10 2006 9 2009 AF2031-2181
MERCEDES BENZ E55 AMG S211 P 5.4 V8 MPFI SOHC 24V M113.960 x2 6 2004 0 2006 AF2031-2181
MERCEDES BENZ ML350 W164 P 3.5 V8 MPFI DOHC 24V M272.967 x2 9 2005 0 2018 AF2031-2181
MERCEDES BENZ ML500 W164 P 5.0 V8 MPFI SOHC 24V M113.964 x2 9 2005 0 2007 AF2031-2181
MERCEDES BENZ R350 W251 P 3.5 V6 MPFI DOHC 24V M272.967 x2 4 2006 6 2010 AF2031-2181
MERCEDES BENZ S320 W220 P 3.2 V6 MPFI SOHC 18V M112.94 x2 4 1999 8 2002 AF2031-2181
MERCEDES BENZ S350 W220 P 3.7 V6 MPFI SOHC 18V M112.972 x2 3 2003 0 2006 AF2031-2181
MERCEDES BENZ S350 W221 P 3.5 V6 MPFI DOHC 24V M272.965 x2 2 2006 2 2011 AF2031-2181
MERCEDES BENZ S430 & S430L W220 P 4.3 V8 MPFI SOHC 24V M113.941 x2 4 1999 0 2006 AF2031-2181
MERCEDES BENZ S500L W220 P 5.0 V8 MPFI SOHC 24V M113.960 x2 4 1999 0 2006 AF2031-2181
MERCEDES BENZ S500L W221 P 5.5 V8 MPFI DOHC 32V M113.960 x2 2 2006 0 2018 AF2031-2181
MERCEDES BENZ S55 AMG W220 P 5.4 V8 MPFI SOHC 24V M113.995 x2 3 2003 0 2006 AF2031-2181
MERCEDES BENZ SL350 R230 P 3.7 V6 MPFI SOHC 18V M112.973 x2 10 2003 0 2006 AF2031-2181
MERCEDES BENZ SL500 R129 P 5.0 V8 MPFI DOHC 32V M119.972 x2 9 1993 7 2002 AF2031-2181
MERCEDES BENZ SL500 R230 P 5.0 V8 MPFI DOHC 32V M113.965 x2 5 2006 0 2018 AF2031-2181
MERCEDES BENZ SL55 AMG R230 P 5.4 V8 MPFI SOHC 24V M113.992 x2 9 2002 4 2006 AF2031-2181
MERCEDES BENZ SLK280 R171 P 3.0 V6 MPFI DOHC 24V M272.942 x2 5 2005 5 2008 AF2031-2181

AIR & OIL FILTER APPLICATION GUIDE

MERCEDES BENZ SLK350 R171 P 3.5 V6 MPFI DOHC 24V M272.963 x2 8 2004 5 2008 AF2031-2181
MERCEDES BENZ SLK55 AMG R171 P 5.5 V8 MPFI SOHC 24V M112.989 x2 4 2005 6 2011 AF2031-2181
MITSUBISHI
MITSUBISHI 3000GT P 3.0 MPFI DOHC 24V 6G72A 10 1992 0 1998 AF2296-1004
MITSUBISHI ASX P 2.0 MPFI DOHC 16V 4B11 7 2010 0 2015 AF2296-1010 AF2031-2392
MITSUBISHI ASX TD 1.8 & 2.2 DI DOHC 16V 4N13,4N14 7 2010 0 2015 AF2296-1010
MITSUBISHI CHALLENGER P 3.0 MPFI SOHC 24V 6G72 3 1998 0 2000 AF2296-1004
MITSUBISHI CHALLENGER TD 2.5 MPFI DOHC 16V 4D56 12 2009 0 2015 AF2031-2951
MITSUBISHI COLT P 1.5 MPFI DOHC 16V 4G15,4A91 8 2004 0 2015 AF2296-1010
MITSUBISHI COLT P 1.5 MPFI DOHC 16V 4G15,4G15T 7 2006 3 2011 AF2296-1008
MITSUBISHI EXPRESS VAN P 2.0 & 2.4 MPFI SOHC 16V 4G63B,4G64B 9 1994 0 2015 AF2296-1010
MITSUBISHI FTO P 2.0 MPFI 6A12G 0 1994 0 1999 AF2296-1010
MITSUBISHI GALANT P 2.0 MPFI DOHC 24V 4G63A,6A12A 4 1993 0 1996 AF2296-1010
MITSUBISHI LANCER P 1.5,1.6 & 1.8 MPFI 4G15,4G61,4G92,4G93 12 1991 6 2004 AF2296-1010
MITSUBISHI LANCER P 1.5,1.8,2.0 & 2.4 MPFI SOHC 16 4G15,4G93,4G94,4G69 7 1996 9 2007 AF2296-1010 AF2031-2105
MITSUBISHI LANCER P 2.0 & 2.4 MPFI DOHC 16V 4B11,4B12 10 2007 0 2015 AF2296-1010 AF2031-2392
MITSUBISHI LANCER EVO VIII & IX P 2.0 MPFI DOHC 16V TURBO 4G63T 5 2004 0 2007 AF2296-1008 AF2031-2105
MITSUBISHI LANCER EVO X P 2.0 MPFI DOHC 16V MIVEC 4B11 MIVEC 9 2008 0 2015 AF2296-1008 AF2031-2392
MITSUBISHI MAGNA P 3.0 MPFI SOHC 12V 6Y721 4 1993 0 1996 AF2296-1004
MITSUBISHI MAGNA P 2.4 MPFI SOHC 16V 4G64-S4 4 1996 0 1999 AF2296-1010
MITSUBISHI MIRAGE P 1.5 MPFI SOHC 12V 4G15B 7 1996 0 2004 AF2296-1010 AF2031-2105
MITSUBISHI MIRAGE P 1.2 MPFI DOHC 12V 3A92 12 2012 0 2015 AF2296-1010
MITSUBISHI NIMBUS P 2.4 MPFI SOHC 16V 4G64B 8 1992 0 2004 AF2296-1008
MITSUBISHI OUTLANDER P 2.4 MPFI SOHC 16V 4G64A,4G69 1 2003 0 2006 AF2296-1008 AF2031-2105
MITSUBISHI OUTLANDER P 2.4 & 3.0 MPFI DOHC 24V 4B12,6B31 10 2006 0 2015 AF2296-1010 AF2031-2392
MITSUBISHI OUTLANDER P 2.0,2.2 & 2.4 MPFI DOHC 16V 4J11,4N14,4J12 11 2012 0 2015 AF2296-1010
MITSUBISHI PAJERO P 3.0,3.5 &3.8 MPFI SOHC 24V 6G72A,6G74A,6G75 6 1993 0 2015 AF2296-1004
MITSUBISHI PAJERO IO P 1.6,1.8 & 2.0 MPFI SOHC 16V 4G18,4G93,4G63 3 1999 0 2003 AF2296-1010 AF2031-2105
MITSUBISHI STARWAGON P 2.0 & 2.4 SOHC 16V 4G63B,4G63,4G64 9 1990 5 2004 AF2296-1010
MITSUBISHI STARWAGON P 3.0 MPFI SOHC 24V 6G72 9 1994 12 1996 AF2296-1004
MITSUBISHI TRITON P 3.0 MPFI SOHC 24V 6G72 10 1996 0 2006 AF2296-1004
MITSUBISHI TRITON P 2.4 MPFI SOHC 16V 4G64B 10 1996 12 2006 AF2296-1010
MITSUBISHI TRITON P 3.5 MPFI SOHC 24V 6G74A 6 2006 8 2009 AF2296-1004 AF2031-2951
MITSUBISHI TRITON TD 2.5 & 3.2 MPFI DOHC 16V 4D56,4M41 6 2006 0 2015 AF2031-2951
MITSUBISHI TRITON P 2.4 MPFI SOHC 16V 4G64B,4G64 3 2007 0 2015 AF2296-1010 AF2031-2951
MITSUBISHI VERADA P 3.0 MPFI SOHC 12V 6Y721 8 1991 2 1997 AF2296-1004
NISSAN
NISSAN 180SX P 1.8 TMPFI CA18DET 0 1989 0 1991 AF2296-2008 AF2031-2031
NISSAN 180SX P 2.0 TMPFI SR20DET 0 1991 0 1996 AF2296-1003 AF2031-2031
NISSAN 200SX P 2.0 TMPFI DOHC 16V SR20DET 10 1994 0 2003 AF2296-1008 AF2031-2031
aeroflowperformance.com 123
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

NISSAN 300C P 3.0 MPFI VG30E 5 1984 0 1988 AF2296-2008 AF2031-2031

NISSAN 300ZX P 3.0 MPFI DOHC 24V VG30E,VG30E,VG30DE 0 1984 0 1997 AF2296-2008
NISSAN 350Z P 3.5 MPFI DOHC 24V VQ35DE 2 2003 0 2007 AF2296-1008 AF2031-2031
NISSAN 350Z P 3.5 MPFI DOHC 24V VQ35HR 9 2007 5 2009 AF2296-1008 AF2031-2399
NISSAN 370Z P 3.7 MPFI DOHC 24V VQ37-VHR 5 2009 0 2015 AF2296-1008 AF2031-2399
NISSAN 720 P 1.5 & 1.6 J15,J16 0 1980 0 1981 AF2296-2008
NISSAN 721 PICK-UP P 1.6 J16 0 1980 0 1981 AF2296-2008
NISSAN 745 VANS P 0 1981 0 1984 AF2296-2008
NISSAN ALMERA P 1.5 MPFI DOHC 16V HR15DE 8 2012 0 2015 AF2296-1008
NISSAN ALTIMA P 2.5 MPFI DOHC 16V QR25DE 11 2013 0 2015 AF2296-1008
NISSAN ALTIMA P 3.5 MPFI DOHC 24V VQ35DE 11 2013 0 2015 AF2296-1008 AF2031-2031
NISSAN B120 PICK-UP P 0 1971 0 1986 AF2296-2008
NISSAN BLUEBIRD P 2.0 SOHC CA20S 4 1985 0 1986 AF2296-2008
NISSAN BLUEBIRD P 2.4 MPFI DOHC 16V KA24DE 10 1993 12 1997 AF2296-2008 AF2031-2031
NISSAN C20 VAN P 0 1981 0 1986 AF2296-2008
NISSAN CABSTAR P 2.0 & 2.2 Z20,Z20S,Z22S 0 1982 0 1987 AF2296-2008
NISSAN CUBE P 1.4 MPFI DOHC 16V CR14DE 10 2002 4 2005 AF2296-1003
NISSAN DUALIS P 2.0 MPFI DOHC 16V MR20 12 2007 5 2014 AF2296-1008
NISSAN EXA P 1.2 TMPFI KN12 0 1983 0 1986 AF2296-2008
NISSAN EXA P 1.3 TWIN CAM KN13 0 1987 0 1991 AF2296-2008 AF2031-2031
NISSAN GAZELLE P 2.0 SOHC CA20E 1 1984 0 1988 AF2296-2008
NISSAN INFINITI P 4.5 MPFI DOHC 32V VH45DE 9 1993 0 1997 AF2296-2008
NISSAN JUKE P 1.6 MPFI DOHC 16V HR16DE,MR16DDT 10 2013 0 2015 AF2296-1008
NISSAN MAXIMA P 3.0 MPFI SOHC 12V VG30E 5 1990 2 1995 AF2296-2008 AF2031-2031
AIR & OIL FILTER APPLICATION GUIDE

NISSAN MAXIMA P 3.0 MPFI DOHC 24V VQ30DE 2 1995 0 2003 AF2031-2031
NISSAN MAXIMA P 2.5 & 3.5 MPFI DOHC 24V VQ25,VQ35,VQ35DE 12 2003 0 2015 AF2296-1008 AF2031-2031
NISSAN MICRA P 1.3 & 1.4 MPFI DOHC 16V CG13DE,CR14DE 6 1995 9 2010 AF2296-1003
NISSAN MICRA P 1.2 & 1.5 MPFI DOHC 12V 16V HR12,HR15 11 2010 0 2015 AF2296-1008
NISSAN MURANO P 3.5 MPFI DOHC 24V VQ35DE 7 2005 0 2015 AF2296-1008 AF2031-2031
NISSAN NAVARA P 2.4 & 3.0 MPFI SOHC 12V VG30E,KA24E 6 1992 8 1999 AF2296-2008 AF2031-2031
NISSAN NAVARA P 2.4,3.0 & 3.3 MPFI DOHC 24V KA24E,VG30E,VG33E 6 1992 0 2005 AF2296-1003 AF2031-2031
NISSAN NAVARA TD 3.0 DOHC 16V ZD30 12 2001 0 2005 AF2041-2020
NISSAN NAVARA TD 2.5 DI DOHC 16V YD25 11 2005 0 2015 AF2296-2004 AF2031-2080
NISSAN NAVARA TD 2.5 DOHC 16V YD25 2 2008 0 2015 AF2296-2004 AF2041-2020
NISSAN NOMAD P 2.4 CARB Z24 12 1986 10 1992 AF2296-2008
NISSAN NX COUPE P 2.0 DOHC SR20DE 10 1991 0 1996 AF2296-1003 AF2031-2031
NISSAN PATHFINDER P 3.0 SOHC 12V VG30E 9 1992 0 1995 AF2296-2008 AF2031-2031
NISSAN PATHFINDER P 3.3 SOHC 24V VG33E 11 1995 0 2005 AF2031-2031
NISSAN PATHFINDER TD 2.5 MPFI DOHC 16V YD25,YDK25 7 2005 0 2015 AF2296-2004 AF2031-2080
NISSAN PATHFINDER TD 3.0 DI DOHC 24V V9X 10 2010 0 2015 AF2031-2080
NISSAN PATHFINDER P 3.5 MPFI DOHC 24V VQ35 10 2013 0 2015 AF2296-1008 AF2031-2031
NISSAN PATROL P 3.0 CARB RB30S 3 1990 0 1998 AF2296-2008
NISSAN PATROL P 4.2 EFI TB42E 2 1992 0 1997 AF2031-2031
NISSAN PATROL TD 2.8,3.0,4.2 MPFI DOHC 16V RD28QT,TD42T,
ZD30,ZD30D 1 1998 0 2015 AF2041-9267
NISSAN PINTARA P 2.0 & 2.4 SOHC CA20E,KA24E 6 1986 10 1992 AF2296-2008 AF2031-2031
NISSAN PRAIRIE P 1.5 CARB E15 12 1982 0 1987 AF2296-2008
NISSAN PULSAR P 1.3,1.4,1.5,1.6 DOHC A14,E13,E15,E16 0 1980 0 1989 AF2296-2008
NISSAN PULSAR P 1.6 & 1.8 EFI 16LF,18LF 7 1987 0 1991 AF2296-1001
NISSAN PULSAR P 2.0 MPFI DOHC 16V SR20DE,SR20DET 0 1990 9 1995 AF2296-1003 AF2031-2031
NISSAN PULSAR P 1.6 MPFI DOHC 16V GA16DE 10 1991 0 2000 AF2296-2008 AF2031-2031
NISSAN PULSAR P 1.6,1.8 & 2.0 MPFI DOHC 16V QG16DE,QG18DE,
SR20DE 10 1995 0 2006 AF2296-1008 AF2031-2031
NISSAN PULSAR P 1.6 & 1.8 MPFI DOHC 16V MRA8DE,MR16DDT 2 2013 0 2015 AF2296-1008
NISSAN PULSAR ET P 1.3,1.5 & 1.6 E15ET 0 1983 0 1987 AF2296-2008
NISSAN PULSAR EXA P 1.3,1.5 & 1.6 E15ET 0 1983 0 1987 AF2296-2008
NISSAN PULSAR EXA P 2.0 MPFI DOHC 16V SR20DE,SR20DET 0 1990 0 1999 AF2296-1003 AF2031-2031
NISSAN PULSAR VAN P 1.3 E13 9 1983 0 1985 AF2296-2008
NISSAN QASHQAI P 2.0 DI DOHC 16V MR20 6 2014 0 2015 AF2296-1008
NISSAN S-CARGO P 1.5 CARB E15S 0 1989 0 1996 AF2296-2008
NISSAN SERENA P 2.0 MPFI DOHC 16V SR20DE 10 1991 0 1995 AF2296-1003 AF2031-2031
NISSAN SILVIA P 1.8 DOHC CA18DE,CA18DET 0 1988 0 1991 AF2296-2008
NISSAN SILVIA P 2.0 DOHC 16V SR20DE,SR20DET 0 1991 10 1993 AF2296-1003 AF2031-2031
NISSAN SILVIA P 2.0 MPFI DOHC 16V SR20DE,SR20DET 10 1993 0 1999 AF2296-1008 AF2031-2031

124 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter
NISSAN SKYLINE P 2.0,2.5 & 2.6 MPFI DOHC 24V RB20DE,RB20DET,
RB25DE,RB25DET,
RB26DETT,RB30E 0 1985 5 2001 AF2296-2008 AF2031-2031
NISSAN SUNNY P 1.2 & 1.5 0 1977 0 1984 AF2296-2008
NISSAN TERRANO P 2.4 MPFI SOHC 12V KA24E 3 1997 6 2000 AF2296-2008 AF2031-2031
NISSAN TIIDA P 1.8 MPFI DOHC 16V MR18 2 2006 0 2015 AF2296-1008
NISSAN URVAN P 2.0,2.3 & 2.4 SOHC E23,Z20,SD23,Z24S 0 1981 0 1993 AF2296-2008
NISSAN UTE P 0 1988 0 1993 AF2296-3001
NISSAN VANETTE P 1.2 & 2.0 CARB A12,Z20 10 1980 9 1993 AF2296-2008
NISSAN VB VAN P 0 1977 0 1984 AF2296-2008
NISSAN X-TRAIL P 2.5 MPFI DOHC 16V QR25DE 10 2001 9 2007 AF2296-1008 AF2031-2031
NISSAN X-TRAIL P 2.0 & 2.5 MPFI DOHC 16V MR20DE,QR25DE,
MR20,QR25 10 2007 0 2015 AF2296-1008
PEUGEOT
PEUGEOT 4008 P 2.0 MPFI DOHC 16V 4B11 5 2012 0 2015 AF2296-2004
PEUGEOT 505 P 2.0 & 2.2 MPFI SOHC 8V ZEJ,ZDJK,ZDJL 8 1983 0 1988 AF2296-2004
PEUGEOT 604 P 2.7 CARB OHV 8V ZM 4 1978 0 1982 AF2296-2004
PROTON
PROTON EXORA P 1.6 DI DOHC 16V S4PH 10 2013 0 2015 AF2296-1010
PROTON GEN 2 P 1.6 MPFI DOHC 16V S4PH 10 2004 0 2015 AF2296-1010
PROTON JUMBUCK UTE P 1.5 MPFI SOHC 12V 4G15P 2 2003 0 2015 AF2296-1010
PROTON M21 COUPE P 1.8 MPFI DOHC 16V 4G93P 9 1997 0 2000 AF2296-1010
PROTON PERSONA P 1.3 & 1.6 MPFI DOHC 16V 4G13P,4G92P,S4PH 11 1996 0 2015 AF2296-1010
PROTON PREVE P 1.6 MPFI DOHC 16V S4PH 10 2012 0 2015 AF2296-1010

AIR & OIL FILTER APPLICATION GUIDE

PROTON S16 P 1.3 & 1.6 MPFI DOHC 16V S4PH 12 2009 0 2015 AF2296-1010
PROTON SATRIA P 1.3,1.6 & 1.8 MPFI DOHC 16V 02 2 1997 0 2015 AF2296-1010
PROTON SUPREMA P 1.6 MPFI DOHC 16V S4PH 2 2014 0 2015 AF2296-1010
PROTON WAJA P 1.6 MPFI SOHC 16V 4G18P-S4 11 2001 0 2005 AF2296-1010
PROTON WIRA P 1.6 MPFI SOHC 16V 05 5 1995 0 1996 AF2296-1010
RENAULT
RENAULT 20TS P 1.6,2.0 & 2.2 0 1979 0 1983 AF2296-2004
RENAULT FUEGO P 2.0 CARB SOHC 12V J6R 0 1982 0 1987 AF2296-2004
ROVER
ROVER 416i P 1.6 MPFI D16A3 9 1987 0 1990 AF2296-1004
SAAB
SAAB 9-3 P 2.0 & 2.3 MPFI DOHC 16V B204,B234,B235 6 1998 0 2001 AF2296-1002
SAAB 9-5 P 2.0,2.3 & 3.0 MPFI DOHC 24V B205,B235,B308 11 1997 0 2009 AF2296-1002
SAAB 900 P 2.0 MPFI DOHC 16V B201XI,B202L,B202 0 1979 0 1993 AF2296-2004
SAAB 900 P 2.0,2.1 & 2.3 MPFI DOHC 16V B206L,B204L,B212L,B234
0 1980 0 1998 AF2296-1002
SAAB 900 P 2.5 MPFI DOHC 24V B256,B258 0 1993 0 1998 AF2296-1001
SAAB 9000 P 2.0 & 2.3 MPFI DOHC 16V B202L 0 1986 0 1998 AF2296-1002
SAAB 9000 P 3.0 MPFI DOHC 24V B308 0 1994 0 1997 AF2296-2001
SKODA
SKODA OCTAVIA TD 1.9 & 2.0 MPFI DOHC 16V BXE,BKD,CEG,BMM 0 2006 0 2015 AF2031-2865
SKODA OCTAVIA P 2.0 MPFI DOHC 16V CCZ 10 2007 2 2015 AF2031-2865
SKODA SUPERB TD 2.0 DOHC 16V CBBB,CFG 5 2009 7 2011 AF2031-2865
SKODA SUPERB P 1.8 MPFI DOHC 16V CDA 5 2009 0 2015 AF2031-2865
SKODA YETI TD 2.0 DI DOHC 8V CFH 9 2011 0 2015 AF2031-2865
SKODA YETI P 1.8 DI DOHC 16V CDAA 3 2012 5 2014 AF2031-2865
SMART
SMART FORFOUR P 1.3 & 1.5 MPFI DOHC 16V M135.930,M135.950 10 2004 1 2007 AF2296-1010
SUBARU
SUBARU BRZ P 2.0 DI DOHC 16V FA20 7 2012 0 2018 AF2296-1004 AF2031-2300
SUBARU FIORI P 0.8 SOHC 8V EN08 11 1989 12 1992 AF2296-1008
SUBARU FORESTER P 2.0 MPFI DOHC 16V EJ205,EJ20J 8 1997 7 2002 AF2031-2031
SUBARU FORESTER P 2.0 MPFI DOHC 16V ED202,EJ25D 4 1999 7 2003 AF2031-2154
SUBARU FORESTER P 2.5 MPFI SOHC 16V EJ251,EJ253 7 2002 2 2008 AF2296-1008 AF2031-2154
SUBARU FORESTER P 2.5 MPFI DOHC 16V EJ25DET 8 2003 2 2008 AF2296-1008 AF2031-2031
SUBARU FORESTER P 2.5 MPFI DOHC 16V EJ25,EJ25DET,FB25 3 2008 0 2015 AF2296-1008 AF2031-2304
SUBARU FORESTER P 2.5 MPFI DOHC 16V FB25 2 2011 0 2018 AF2296-1004 AF2031-2304
SUBARU FORESTER P 2.0 DI DOHC 16V FA20 6 2012 0 2018 AF2296-1010 AF2031-2304

aeroflowperformance.com 125
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

SUBARU IMPREZA P 1.6,1.8 & 2.0 MPFI SOHC 16V EJ16,EJ18S,EJ20E,

EJ16J 4 1993 10 2000 AF2031-2031
SUBARU IMPREZA P 2.0 MPFI DOHC 16V EJ205,EJ201,EJ205,
EJ207 4 1998 9 2005 AF2031-2154
SUBARU IMPREZA P 2.0 MPFI DOHC 16V FB20 2 2012 0 2018 AF2296-1010 AF2031-2304
SUBARU IMPREZA WRX P 2.0 & 2.5 MPFI DOHC 16V EJ251,EJ255,EJ205 10 2000 8 2007 AF2296-1008 AF2031-2154
SUBARU IMPREZA WRX P 2.0 & 2.5 MPFI DOHC 16V EJ257 7 2003 8 2007 AF2296-1008 AF2031-2031
SUBARU IMPREZA WRX & STi P 2.0 & 2.5 MPFI DOHC 16V EJ20,EJ255,EJ257,
EJ204,FA 9 2007 0 2015 AF2296-1008 AF2031-2304
SUBARU LIBERTY P 2.0,2.2 & 2.5 MPFI DOHC 16V EJ22E,EJ25D,EJ20E,
EJ206,EJ208 10 1989 8 2003 AF2031-2031
SUBARU LIBERTY P 2.0 & 2.5 MPFI SOHC 16V EJ20E,EJ201,EJ251,
EJ25D 10 1998 8 2003 AF2031-2154
SUBARU LIBERTY P 2.0 & 2.5 MPFI DOHC 16V EJ20Y,EJ202,EJ20T,
EJ204,EJ20X,EJ251,
EJ255,EJ25,EJ20E,
EJ25D,EJ253 9 2003 0 2015 AF2296-1008 AF2031-2304
SUBARU LIBERTY P 3.0 & 3.6 MPFI DOHC 24V EZ30D,EZ36D 8 2004 0 2015 AF2296-1004 AF2031-2304
SUBARU OUTBACK P 2.5 MPFI DOHC 16V EJ25 9 1996 10 1998 AF2031-2031
SUBARU OUTBACK P 2.5 MPFI SOHC EJ25D,EJ251,EJ25 10 1998 8 2009 AF2031-2154
SUBARU OUTBACK P 3.0 MPFI DOHC 24V EZ30D 10 2000 8 2003 AF2296-1004 AF2031-2031
SUBARU OUTBACK P 3.0 & 3.6 MPFI DOHC 24V EZ30D,EZ36D 10 2002 0 2015 AF2296-1004 AF2031-2304
SUBARU OUTBACK P 2.5 MPFI SOHC 16V EJ253,EJ25 9 2003 8 2012 AF2296-1008 AF2031-2304
SUBARU OUTBACK TD 2.0 MPFI DOHC 16V EE20 11 2009 0 2015 AF2031-2304
AIR & OIL FILTER APPLICATION GUIDE

SUBARU OUTBACK P 2.5 MPFI FB25 9 2012 0 2018 AF2296-1010 AF2031-2304

SUBARU SHERPA P 0.7 SOHC EK42 10 1982 8 1989 AF2296-1008
SUBARU SVX P 3.3 MPFI DOHC 24V EG33M 3 1992 4 1997 AF2296-1004 AF2031-2031
SUBARU TRIBECA P 3.0 & 3.6 MPFI DOHC 24V EZ30,EZ36 11 2006 0 2015 AF2296-1004 AF2031-2304
SUBARU XV P 2.0 MPFI DOHC 16V FB20 1 2012 0 2018 AF2296-1010 AF2031-2304
SUZUKI
SUZUKI ALTO P 0.8 & 1.0 CARB SOHC 8V F8B,G10B 0 1980 0 1998 AF2296-1002
SUZUKI ALTO P 1.0 MPFI DOHC 12V K10BN 7 2009 0 2015 AF2296-1003
SUZUKI BALENO P 1.3,1.6 & 1.8 MPFI SOHC 16V G16B,J18A,J18B 0 1992 0 2001 AF2296-1002
SUZUKI BARINA P 1.3 MPFI 0 1992 0 1993 AF2296-1002
SUZUKI CARRY VAN P 1.3 MPFI SOHC 16V G13BB 5 1999 0 2005 AF2296-1002
SUZUKI CRESENT P 1.3 MPFI 0 1992 0 1993 AF2296-1002
SUZUKI CULTUS P 1.3 MPFI 0 1992 0 1993 AF2296-1002
SUZUKI GRAND VITARA P 2.0 MPFI DOHC 16V J20A 4 1998 9 2008 AF2296-1002
SUZUKI HATCH P 0.5 & 0.8 MPFI F5A,F8B 2 1980 0 1985 AF2296-1002
SUZUKI IGNIS P 1.3 & 1.5 MPFI DOHC 16V M13A,M15A 10 2000 2 2005 AF2296-1002
SUZUKI JIMNY P 1.3 MPFI SOHC 16V G13BB,M13A 10 1998 0 2015 AF2296-1002
SUZUKI LIANA P 1.6 MPFI DOHC 16V M16A 10 2001 9 2007 AF2296-1002
SUZUKI MIGHTY BOY P 0.5 F5A 7 1985 0 1988 AF2296-1002
SUZUKI R+5 DOOR WAGON P 1.0 MPFI K10A 10 1997 11 1998 AF2296-1002
SUZUKI SIERRA P 1.0 CARB F10A 7 1981 0 1998 AF2296-1002
SUZUKI SK410 P 1.0 7 1985 0 1990 AF2296-1002
SUZUKI STOCKMAN P 1.0 CARB 0 1981 9 2000 AF2296-1002
SUZUKI SUPER CARRY P 1.0 CARB F10A 7 1985 0 1992 AF2296-1002
SUZUKI SWIFT P 1.1,1.3 & 1.6 MPFI DOHC 16V G10,G10A,G13A,
G13B,G16B 0 1984 0 2000 AF2296-1002
SUZUKI SWIFT FZ SPORT P 1.6 MPFI DOHC 16V M16A 1 2012 0 2018 AF2296-1002 AF2031-2031
SUZUKI TRUCK P 1.3 MPFI 5 1999 7 2005 AF2296-1002
SUZUKI UTE P 1.3 MPFI 5 1999 0 2015 AF2296-1002
SUZUKI VITARA P 1.6 & 2.0 MPFI DOHC 16V G16B,J20A 8 1991 0 2000 AF2296-1002
SUZUKI X-90 P 1.6 MPFI SOHC 16V G16B 4 1996 5 1998 AF2296-1002
TOYOTA
TOYOTA 4 RUNNER D 2.4 & 2.8 2L,3L 7 1984 0 1996 AF2296-3001
TOYOTA 4 RUNNER P 2.4 & 3.0 CARB SOHC 12V 22RC,3VZE 10 1990 0 1996 AF2296-1002
TOYOTA 86 P 2.0 DI DOHC 16V 4UGSE 6 2012 0 2018 AF2296-1004 AF2031-2300
TOYOTA AURION GSV50R P 3.5 V6 MPFI DOHC 24V 2GR-FE 4 2012 0 2018 AF2031-2443
TOYOTA AVALON P 3.0 MPFI DOHC 24V 1MZ-FE 7 2000 3 2006 AF2296-1002
TOYOTA AVENSIS P 2.0 & 2.4 MPFI DOHC 16V 1AZ-FE,2AZ-FE 12 2001 12 2010 AF2296-1003 AF2031-2300
TOYOTA BLIZZARD D 2.2 L 3 1982 0 1983 AF2296-3001
TOYOTA BUNDERA TD 2.4 3B,13BT 0 1985 0 1987 AF2296-3001 AF2041-2443

126 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

TOYOTA BUNDERA TD 2.4 2LT 3 1986 0 1989 AF2296-3001

TOYOTA CAMRY P 1.8,2.0,2.2 & 2.4 MPFI DOHC 1SE,2SE,3SFE,3SFC,
5SFE,2AZ-FE 4 1983 2 2012 AF2296-1003
TOYOTA CAMRY P 2.5 & 3.0 MPFI DOHC 24V 2VZ-FE4,3VZ-FE,1MZ-FE 6 1988 0 2006 AF2296-1002
TOYOTA CARINA P IMPORT 0 1987 0 1990 AF2296-1003
TOYOTA CELICA P 1.8,2.0 & 2.2 MPFI DOHC 16V 2SC,3SGELC,3SFE,
5SFE,3SGTE,2ZZ-GE 10 1983 3 2006 AF2296-1003
TOYOTA CHASER P 2.5 1JZ-GTE 1 1992 0 2001 AF2296-1002
TOYOTA COASTER BUS D 3.2 & 3.4 OHV 2B,3B 0 1978 0 1999 AF2296-3001
TOYOTA COASTER BUS D 4.0 & 4.2 SOHC 2H,1HZ 1 1987 0 2003 AF2041-2443
TOYOTA COMMUTER BUS D 3.0 10 1990 0 1993 AF2296-3001
TOYOTA COROLLA P 1.3,1.4,1.6 & 1.8 DOHC 16V 4AC,2ALC,4ALC,
6AFC,4AFC,4AGE,
4AFE,7AFE,1ZZ-FE,
2ZZ-FE,2ZR-FE 10 1983 1 2009 AF2296-1003
TOYOTA COROLLA ZRE152R P 1.8 4 MPFI DOHC 16V 2ZR-FE 5 2007 1 2009 AF2296-1003 AF2031-2360
TOYOTA COROLLA ZRE152R P 1.8 4 MPFI DOHC 16V 2ZR-FE 1 2009 10 2012 AF2031-2360
TOYOTA COROLLA ZRE153R P 1.8 4 MPFI DOHC 16V 3ZR-FE 6 2010 0 2018 AF2031-2360
TOYOTA COROLLA ZRE172R P 1.8 4 MPFI DOHC 16V 2ZR-FE 2 2014 0 2018 AF2031-2360
TOYOTA COROLLA ZRE182R P 1.8 4 MPFI DOHC 16V 2ZR-FE 11 2012 0 2018 AF2031-2360
TOYOTA COROLLA ZZE122R P 1.8 4 MPFI DOHC 16V 1ZZ-FE 12 2001 4 2007 AF2296-1003 AF2031-2300
TOYOTA COROLLA ZZE123R P 1.8 4 MPFI 2ZZ-FE 5 2003 0 2005 AF2296-1003 AF2031-2300
TOYOTA CORONA P 1.9 CARB STARFIRE 10 1979 0 1983 AF2296-2003
TOYOTA CORONA P 1.8 & 2.0 CARB 4SF,2S 8 1983 0 1993 AF2296-1003

AIR & OIL FILTER APPLICATION GUIDE

TOYOTA CRESSIDA P 3.0 MPFI DOHC 24V 7MGE 10 1988 0 1992 AF2296-1002
TOYOTA CROWN P 2.6 4M 0 1981 0 1985 AF2296-3001
TOYOTA CROWN P 2.5,2.8 & 4.0 MPFI DOHC 24V 5MGEU,1JZ-GTE,
1UZ-FE 12 1985 0 2005 AF2296-1002
TOYOTA DYNA D 4.0 OHV 2H,1W 7 1982 0 1995 AF2041-2443
TOYOTA DYNA D 2.4,2.8,3.0,3.4 & 3.7 SOHC OHV 2L,3L,3B11,14B 11 1985 4 2005 AF2296-3001
TOYOTA DYNA D 4.6 & 4.9 SOHC 16V S05C,S05D 3 2001 0 2003 AF2041-2444
TOYOTA ECHO P 1.3 & 1.5 MPFI DOHC 16V 1NZ-FE,2NZ-FE 9 1999 0 2005 AF2296-1003
TOYOTA HARRIER P 3.0 IMPORT 0 1997 0 2003 AF2296-1002
TOYOTA HIACE D 2.2,2.4,2.8 & 3.0 SOHC L,2L,3L 3 1981 0 2000 AF2296-3001
TOYOTA HIACE P 2.4 SOHC 2RZ 10 1989 0 1998 AF2296-2004
TOYOTA HIACE P 2.4 & 2.7 MPFI SOHC DOHC 16V 2RZ,2RZE,2TR-FE 0 1993 0 2015 AF2296-1002
TOYOTA HIACE D 2.5 & 3.0 DI DOHC 16V 1KD-FTV,2KD-FTV 5 2005 0 2015 AF2296-1002
TOYOTA HILUX D 2.2,2.4,2.8 & 3.0 SOHC 8V L,2L,3L,5L 10 1978 0 2000 AF2296-3001
TOYOTA HILUX P 1.8 CARB 2Y 10 1988 0 1998 AF2296-1003
TOYOTA HILUX P 2.4 SOHC 22RC 1 1993 0 1997 AF2296-1002
TOYOTA HILUX D 3.0 SOHC 8V 5L 10 1997 0 2000 AF2296-3001 AF2041-2015
TOYOTA HILUX P 2.0,2.7 & 3.4 MPFI DOHC 24V 1RZ-FE,3RZ-FE,5VZ-FE 10 1997 4 2005 AF2296-1002 AF2041-2233
TOYOTA HILUX P 2.7 MPFI DOHC 16V 2TR-FE 4 2005 0 2015 AF2296-1002 AF2041-2296
TOYOTA HILUX P 4.0 MPFI DOHC 24V 1GR-FE 4 2005 0 2015 AF2296-1002 AF2031-2281
TOYOTA HILUX TD 3.0 MPFI DOHC 16V 1KD-FTV 4 2005 0 2015 AF2296-3001 AF2041-2296
TOYOTA KLUGER P 3.3 MPFI DOHC 24V 3MZ-FE 10 2003 7 2007 AF2296-1002
TOYOTA KLUGER GSU50R & GSU55R P 3.5 V6 MPFI DOHC 24V 2GR-FE 3 2014 0 2018 AF2031-2443
TOYOTA LANDCRUISER D 3.4 OHC OHV 3B,13BT 10 1980 0 1990 AF2296-3001 AF2041-2443
TOYOTA LANDCRUISER D 3.5,4.0 & 4.2 MPFI SOHC 24V 1PZ,2H,12HT,1HZ,1HD-FTE,1HD-T
10 1980 0 2007 AF2041-2443
TOYOTA LANDCRUISER P 4.0,4.2 & 4.5 OHV DOHC 24V 2F,3F,1FZ-FE 11 1980 0 1999 AF2296-3001 AF2041-2443
TOYOTA LANDCRUISER P 4.5 MPFI DOHC 24V 1FZ-FE 4 1996 0 2007 AF2296-1002 AF2041-2443
TOYOTA LANDCRUISER P 4.5 & 4.7 MPFI DOHC 24V 32V 1FZ-FE,2UZ-FE 3 1998 10 2007 AF2296-1002 AF2041-2444
TOYOTA LANDCRUISER TD 4.2 MPFI SOHC 24V 1HD-FTE 10 2000 10 2007 AF2041-2444
TOYOTA LANDCRUISER TD 4.5 MPFI DOHC 32V 1VD-FTV 3 2007 0 2015 AF2031-2144
TOYOTA LANDCRUISER P 4.7 MPFI DOHC 32V 2UZ-FE 11 2007 3 2012 AF2296-1002
TOYOTA LANDCRUISER PRADO P 3.4 MPFI 5VE-FE 7 1996 2 2003 AF2296-1002 AF2041-2233
TOYOTA LANDCRUISER PRADO P 2.7 MPFI DOHC 3RZ-FE 7 1996 8 2004 AF2296-1002
TOYOTA LANDCRUISER PRADO TD 3.0 SOHC 8V 1KZ-TE 3 2000 2 2003 AF2041-2444
TOYOTA LANDCRUISER PRADO TD 3.0 MPFI SOHC DOHC 8V 16V 1KD-FTV 2 2003 0 2015 AF2296-1002 AF2031-2144
TOYOTA LANDCRUISER PRADO P 4.0 MPFI DOHC 1GR-FE 3 2003 11 2009 AF2296-1002 AF2031-2281
TOYOTA LANDCRUISER SAHARA TD 4.7 DTFI 2UZ-FE 11 2007 0 2015 AF2296-1002
TOYOTA LEXCEN P 3.8 MPFI VH 9 1989 0 1997 AF2296-1001 AF2031-2031
TOYOTA LITE ACE D 1.8 SOHC 1C 2 1983 0 1992 AF2296-2004

aeroflowperformance.com 127
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter

TOYOTA MR-S P 2.0 TMPFI 1ZZ-FE 0 1989 0 1995 AF2296-1003

TOYOTA MR2 P 1.6,1.8 & 2.0 MPFI DOHC 16V 4AG-EL,1ZZ-FE,
3SGE,3SGTE 11 1987 3 2006 AF2296-1003
TOYOTA PASEO P 1.5 MPFI DOHC 16V 5E-FE 7 1991 0 1999 AF2296-1003
TOYOTA PRIUS H 1.5 MPFI DOHC 16V 1NZ-FXE 10 2001 0 2015 AF2296-1003
TOYOTA RAV4 P 2.0 & 2.4 MPFI DOHC 16V 3S-FE,1AZ-FE,2AZ-FE 5 1994 1 2013 AF2296-1003
TOYOTA RAV4 ZSA42R P 2.0 4 MPFI DOHC 16V 3RZR-FE 2 2013 0 2018 AF2031-2360
TOYOTA RUKUS P 2.4 MPFI DOHC 16V 2AZ-FE 5 2010 0 2015 AF2296-1003
TOYOTA SERA P 1.5 MPFI 5EF-HE 0 1990 0 1995 AF2296-1003
TOYOTA SOARER P 2.5,3.0 & 4.0 MPFI DOHC 1JZ-GTE.2JZGE,
MZ20,MZ21,1UZ-FE 0 1986 0 1999 AF2296-1002
TOYOTA SPACIA P 2.0 & 2.2 MPFI DOHC 16V 3S-FE,4YEC 10 1993 8 2002 AF2296-1003
TOYOTA SPRINTER P 1.6 & 1.8 CARB DOHC 4A-C,7A-FE 7 1983 0 1997 AF2296-1003
TOYOTA STARLET P 1.3 TMPFI DOHC 16V 4E-FE,4E-FTE 0 1988 10 1999 AF2296-1003
TOYOTA SUPRA P 3.0 MPFI DOHC 24V 7MGTE,2JZGE,2JZGTE 0 1988 0 1997 AF2296-1002
TOYOTA TARAGO P 2.4 MPFI DOHC 16V 2TZ-FE 9 1990 8 2000 AF2296-1002
TOYOTA TARAGO P 2.4 MPFI DOHC 16V 2AZ-FE 6 2000 0 2015 AF2296-1003
TOYOTA TERCEL P 1.5 CARB 3AC 10 1983 0 1988 AF2296-1003
TOYOTA TOWNACE P 1.9 & 2.0 MPFI OHV 8V 7K,7K-E,3YC 4 1992 0 2004 AF2296-1003
TOYOTA TOYOACE P 2.0 CARB 5R 6 1980 0 1986 AF2296-3001
TOYOTA TOYOACE D 2.2 & 2.4 L,2L 3 1982 0 1985 AF2296-3001
TOYOTA VIENTA P 3.0 MPFI DOHC 24V 3VZ-FE4,1MZ-FE 8 1995 0 2000 AF2296-1002
TOYOTA YARIS P 1.3 & 1.5 MPFI DOHC 16V 1NZ-FE,2NZ-FE 11 2005 0 2018 AF2296-1003 AF2031-2360
VOLKSWAGEN
AIR & OIL FILTER APPLICATION GUIDE

VOLKSWAGEN BEETLE P 1.4 DI DOHC 16V CTHD 2 2013 0 2015 AF2031-2865

VOLKSWAGEN CADDY TD 1.9 & 2.0 SOHC DOHC 8V 16V BJB,BLS,CFHC 2 2005 0 2015 AF2031-2865
VOLKSWAGEN CC TD 2.0 DOHC 16V CF6B 7 2012 0 2015 AF2031-2865
VOLKSWAGEN EOS TD 2.0 DOHC 16V BMM,CBAB,CFFA 3 2007 0 2015 AF2031-2865
VOLKSWAGEN EOS P 2.0 MPFI DOHC 16V CAWB,CCZB 8 2008 0 2015 AF2031-2865
VOLKSWAGEN GOLF TD 1.5 & 1.9 SOHC 8V CK,1Z 3 1978 0 1998 AF2296-2004
VOLKSWAGEN GOLF P 1.4,1.6,1.9 & 2.0 MPFI DOHC BLG,BKC,BKD,BMN,
CAVD,CAYC,CBAB,
CFFA,CFH,CCZB,
CBBB,CFGB 8 2004 0 2013 AF2031-2865
VOLKSWAGEN GOLF MK III TD 1.9 SOHC 8V 1Z 10 1995 0 1998 AF2296-2004
VOLKSWAGEN GOLF MK V GT P 1.4 4 MPFI DOHC 16V BLG 5 2007 2 2009 AF2031-2865
VOLKSWAGEN GOLF MK V GTI P 2.0 4 MPFI DOHC 16V AXX & BWA 5 2005 9 2009 AF2031-2888
VOLKSWAGEN GOLF MK V GTI P 2.0 4 MPFI DOHC 16V BYD 10 2008 9 2009 AF2031-2888
VOLKSWAGEN GOLF MK V TDI TD 1.9 SOHC 8V BKC 8 2004 0 2006 AF2031-2865
VOLKSWAGEN GOLF MK V TDI TD 2.0 4 DOHC 16V BKD 8 2004 0 2007 AF2031-2865
VOLKSWAGEN GOLF MK V TDI TD 2.0 4 DOHC 16V BMN 0 2007 0 2008 AF2031-2865
VOLKSWAGEN GOLF MK VI 103 TDI TD 2.0 4 DOHC 8V CFFB , CBAB & CFH 0 2009 3 2013 AF2031-2865
VOLKSWAGEN GOLF MK VI 118 TSI P 1.6 4 MPFI DOHC 16V CAVD 3 2009 3 2013 AF2031-2865
VOLKSWAGEN GOLF MK VI 77 TDI TD 1.6 4 MPFI DOHC 16V CAYC 8 2009 3 2013 AF2031-2865
VOLKSWAGEN GOLF MK VI GTD TD 2.0 4 DOHC 16V CBBB & CFGB 6 2010 0 2013 AF2031-2865
VOLKSWAGEN GOLF MK VI GTI P 2.0 4 MPFI DOHC 16V CCZB 10 2009 3 2013 AF2031-2865
VOLKSWAGEN GOLF MK VI R P 2.0 4 MPFI DOHC 16V CDLC 6 2010 3 2014 AF2031-2888
VOLKSWAGEN JETTA TD 1.6,1.9 & 2.0 DOHC 16V BLS,BKD,CAYC,CBD,
CFFB,CEGA,CCFB 0 2006 0 2015 AF2031-2865
VOLKSWAGEN JETTA P 1.4 & 2.0 DI DOHC 16V CAVD,CAWB,CCZA,
CTHD 11 2009 0 2015 AF2031-2865
VOLKSWAGEN JETTA 1B TD 2.0 4 DI DOHC 16V CCFB 2 2013 0 2018 AF2031-2865
VOLKSWAGEN JETTA 1B 118 TSI P 1.4 4 DI DOHC 16V CAVD & CTHD 8 2011 0 2018 AF2031-2865
VOLKSWAGEN JETTA 1K 103 TDI TD 2.0 4 DOHC 16V CBD & CFFB 2 2009 8 2011 AF2031-2865
VOLKSWAGEN JETTA 1K 118 TSI P 1.4 4 DI DOHC 16V CAVD 11 2009 7 2011 AF2031-2865
VOLKSWAGEN JETTA 1K 125 TSI TD 2.0 4 DOHC 16V CEGA 11 2009 7 2011 AF2031-2865
VOLKSWAGEN JETTA 1K 147 TFSI P 2.0 4 MPFI DOHC 16V CAWB,CCZB 11 2009 7 2011 AF2031-2865
VOLKSWAGEN JETTA 1K 147 TFSI P 2.0 4 DI DOHC 16V CCZA 8 2011 0 2018 AF2031-2865
VOLKSWAGEN JETTA 1K 77 TDI TD 1.6 4 CRD DOHC 16V CAYC 11 2009 7 2011 AF2031-2865
VOLKSWAGEN JETTA 1K TDI TD 1.9 4 SOHC 8V BLS 0 2006 0 2007 AF2031-2865
VOLKSWAGEN JETTA 1K TDI TD 2.0 4 DOHC 16V BKD 2 2006 1 2009 AF2031-2865
VOLKSWAGEN JETTA 1K TFSI TD 2.0 4 MPFI DOHC 16V BWA 2 2006 1 2009 AF2031-2888
VOLKSWAGEN PASSAT D 1.5 CARB SOHC 8V CK 0 1978 0 1983 AF2296-2004
VOLKSWAGEN PASSAT TD 2.0 DOHC 16V BKP,BMR,CBAB,CFF,

128 aeroflowperformance.com
 AIR & OIL FILTER APPLICATION GUIDE

Make To Suit Model Fuel Engine Notes From To Oil Filter Air Filter
CFGB,CFGC,CBBB 2 2006 0 2015 AF2031-2865
VOLKSWAGEN PASSAT P 1.8,2.0 & 3.6 MPFI DOHC 24V CDA,CDAA,CAWB,BWS 3 2006 0 2015 AF2031-2865
VOLKSWAGEN PASSAT 3B P 2.8 4 MPFI DOHC 30V ACK,APR,AMX,BBG 3 1998 0 2004 AF2296-2004
VOLKSWAGEN PASSAT 3C TD 2.0 4 DOHC 16V BKP 3 2006 7 2008 AF2031-2865
VOLKSWAGEN PASSAT 3C P 2.0 4 MPFI DOHC 16V BWA 3 2006 1 2010 AF2031-2888
VOLKSWAGEN PASSAT 3C TD 2.0 4 DI DOHC 16V BMR 8 2007 7 2008 AF2031-2865
VOLKSWAGEN PASSAT 3C P 3.6 V6 MPFI DOHC 32V BWS 4 2011 1 2016 AF2031-2865
VOLKSWAGEN PASSAT 3C 103 TDI TD 2.0 4 DOHC 16V CBAB & CFF 8 2008 3 2011 AF2031-2865
VOLKSWAGEN PASSAT 3C 118 TSI P 1.8 4 MPFI DOHC 16V CDA 2 2010 4 2011 AF2031-2865
VOLKSWAGEN PASSAT 3C 118 TSI P 1.8 4 DI DOHC 16V CDAA 2 2010 0 2018 AF2031-2865
VOLKSWAGEN PASSAT 3C 125 TDI TD 2.0 4 DOHC 16V CBBB & CFGB 8 2007 2 2013 AF2031-2865
VOLKSWAGEN PASSAT 3C 130 TDI TD 2.0 4 DI DOHC 16V CFGC 2 2013 0 2018 AF2031-2865
VOLKSWAGEN PASSAT 3C 147 TFSI P 2.0 4 MPFI DOHC 16V CAWB 8 2008 1 2010 AF2031-2865
VOLKSWAGEN PASSAT 3CC 125 TDI TD 2.0 4 DOHC 16V CBBB 2 2009 6 2012 AF2031-2865
VOLKSWAGEN SCIROCCO R P 2.0 4 DI DOHC 16V CDLC 1 2012 0 2018 AF2031-2888
VOLKSWAGEN TIGUAN P 1.4 & 2.0 MPFI DOHC 16V CAVD,CTH,CAWA,CCZA,
CCZD.CAWB,CCZB 8 2008 0 2015 AF2031-2865
VOLKSWAGEN TIGUAN TD 2.0 DOHC 16V CBAB,CFFB 11 2008 0 2015 AF2031-2865
VOLKSWAGEN TOUAREG 7L P 3.2 V6 MPFI DOHC 24V BKJ 9 2003 0 2004 AF2031-2857
VOLKSWAGEN TOUAREG 7L P 3.2 V6 MPFI BMV 9 2003 10 2006 AF2031-2857
VOLKSWAGEN TOUAREG 7L P 4.2 V8 MPFI DOHC 40V AXQ 9 2003 10 2006 AF2031-2857
VOLKSWAGEN TOUAREG 7L TD 5.0 V10 SOHC 20V AYH & BKW 5 2004 8 2010 AF2031-2857
VOLKSWAGEN TOUAREG 7L P 3.2 V6 MPFI DOHC 24V BMV 10 2004 10 2006 AF2031-2857
VOLKSWAGEN TOUAREG 7L TD 2.5 5 SOHC 20V BAC 10 2004 11 2009 AF2031-2857

AIR & OIL FILTER APPLICATION GUIDE

VOLKSWAGEN TOUAREG 7L TD 3.0 V6 DOHC 24V BKS 11 2006 10 2007 AF2031-2857
VOLKSWAGEN TOUAREG 7L P 3.6 V6 SOHC 24V BHK 11 2006 8 2010 AF2031-2857
VOLKSWAGEN TOUAREG 7L TD 3.0 V6 DI DOHC 24V CASA 11 2007 6 2011 AF2031-2857
VOLVO
VOLVO 240 P 2.1 & 2.3 CARB MPFI SOHC 8V B21A,B21E,B23E,
B230E, B230F 0 1969 0 1993 AF2296-2004
VOLVO 242 P 0 1969 12 1992 AF2296-2004
VOLVO 244 P 2.1 CARB SOHC 8V B21A & B23E 0 1969 12 1992 AF2296-2004
VOLVO 245 P 2.3 4 SOHC 8V B23E 0 1981 12 1985 AF2296-2004
VOLVO 260 P 0 1969 12 1992 AF2296-2004
VOLVO 262 P 0 1969 12 1992 AF2296-2004
VOLVO 264 P 0 1969 12 1992 AF2296-2004
VOLVO 265 P 0 1969 12 1992 AF2296-2004
VOLVO 360 P 2.0 4 SOHC 8V B19E,B200E,B200EA 3 1984 0 1990 AF2296-2004
VOLVO 740 TD 0 1969 12 1990 AF2296-2004
VOLVO 740 P 2.3 4 SOHC 8V B230FT,B230E,B230F,
B234FA 0 1985 12 1992 AF2296-2004
VOLVO 760 TD 0 1969 12 1990 AF2296-2004
VOLVO 760 P 2.8 V6 MPFI V6 B280E & B280F 2 1983 0 1991 AF2296-2004
VOLVO 760 P 2.8 V6 SOHC 12V B28E ,B280E, B230ET ,
B23T & B230ET 2 1983 0 1991 AF2296-2004 AF2031-2080
VOLVO 850 P 2.3 & 2.5 MPFI DOHC 10V 20V B523T,B5252,B5234,
B5254 10 1993 0 1997 AF2296-2004
VOLVO 940 P 2.3 MPFI SOHC DOHC 8V 16V B230,B234 11 1990 0 1998 AF2296-2004
VOLVO 960 P 2.8 & 2.9 MPFI DOHC 12V 24V B280F,B6304F 0 1990 0 1997 AF2296-2004
VOLVO C30 MK TD 2.0 4 DI DOHC 16V D4204T 11 2009 8 2010 AF2041-2993
VOLVO C70 P 2.3 MPFI DOHC 20V B5234T3 1 1998 9 2004 AF2296-2004
VOLVO S40 P 1.8,1.9 & 2.0 MPFI DOHC 16V B4184S2,B4194T,
B4204S 2 1997 3 2001 AF2296-2004
VOLVO S40 TD 2.0 DI DOHC 16V B4204T3 11 2009 8 2010 AF2041-2993
VOLVO S70 P 2.3,2.4 & 2.5 MPFI DOHC 20V B5252S,B5234,B5254 2 1997 8 2000 AF2296-2004
VOLVO S80 P 2.8 & 2.9 MPFI DOHC 24V B6284T,B6304 5 1998 10 2003 AF2296-2004
VOLVO S90 P 2.9 MPFI DOHC 24V B6304 2 1997 8 1998 AF2296-2004
VOLVO V40 P 1.8,1.9 & 2.0 MPFI DOHC 16V B6304,B4184,B4204,
B4194 2 1997 0 2002 AF2296-2004
VOLVO V40 TD 1.6 4 DI DOHC 16V D4162TX 2 2013 0 2018 AF2041-2993
VOLVO V50 TD 2.0 4 DI DOHC 16V D4204T 11 2009 0 2018 AF2041-2993
VOLVO V70 P 2.3 & 2.5 MPFI DOHC 20V B5234,B5252,B5254 2 1997 8 2000 AF2296-2004
VOLVO V90 P 2.9 MPFI DOHC 24V B6304SF1 2 1997 8 1998 AF2296-2004
VOLVO XC60 P 2.0 4 DI DOHC 16V B4204T7 3 2011 0 2018 AF2296-1002

aeroflowperformance.com 129
 OIL SYSTEMS & ACCESSORIES

ENGINE OIL FILTERS

Aeroflow oil filters have been designed to incorporate all the latest technology
to provide great filtration with minimal restriction so that your engine performs
at its best with great protection. Aeroflow filters use an improved coil spring
design to replace the commonly used “leaf” style spring and incorporate CNC
machined thread for a precise fit. An Ultra high-Temp silicone anti-drain back
valve in some models helps to prevent dry starts increasing engine life. An
extra-thick backing plate and housing offers superior strength and pressure
fatigue resistance which provides added protection against pressure surges
in racing applications, construction also includes a hi-flow heavy duty base
plate that features a fully tucked double seam. Aeroflow oil filters use a Buna-N
rubber gasket which is compatible with most racing fuels and lubricants. 24mm
- 15/16” hex release nut allows simple and easy removal and incorporates a
hole for use with lock wire. Aeroflow oil filters use a 30 micron premium pleated
synthetic blend media element that provides increased filtration at high flow
rates with minimal pressure drop as well as a perforated centre tube that
allows more flow area & eliminates media wear during pleat movement.

Aeroflow Oil Filter Warranty

In the unlikely event that an Aeroflow oil filter is found to be faulty or
defective in material and/or workmanship, Aeroflow will replace it for you
free of charge.
In the event of an engine failure directly caused by a defective Aeroflow
oil filter, which was professionally installed and changed following the
engine manufacturer’s recommended service intervals, Aeroflow will repair
the damaged engine to the state of the engine immediately prior to the Part No Suits Compatible with
damage.
Claims for engine repairs provided under this warranty must be submitted AF2296-1001 Holden V6 short - 97mm Z154 HP-1001
within 30 days after discovery of damage. Aeroflow reserve the right to AF2296-1002 Toyota, Suzuki Z82, Z125, Z418, Z463, Z632 HP-1002
examine the engine and filter to determine the amount of damage and AF2296-1003 Holden / Toyota Z158, Z386, Z432, Z442 HP-1003
whether it was caused by a defective Aeroflow oil filter. AF2296-1004 Ford Mazda, Honda Mazda 13B Holden, Hyundai Z79A HP-1004
Engine manufacturers warranty remain in effect when Aeroflow oil filters are AF2296-1007 Holden V8 short Z160 HP1007
used. AF2296-1008 Mazda Mitsubishi Evo Lancer Z436, Z445 HP-1008
OILING SYSTEMS & ACCESSORIES

Conditions of this warranty AF2296-1010 Mitsubishi Mazda Z411, Z547 HP-1010

This warranty covers oil filters fitted to engines in accordance with current AF2296-1017 Holden V8 LS2 6.0 Litre Z663 HP-1017
vehicle listings. AF2296-2001 Holden V6 Z154 HP-2001
This Warranty does not extend to labour charges or external charges. AF2296-2002 Chev short Z40 HP-2002
I.E. towing AF2296-2003 Holden V8 Long Z30 & Z80 HP-2003
This warranty does not apply to product that: AF2296-2004 Jeep / Toyota - Late Jeep Cherokee Z10/Z89A HP-2004
• Has been subject to Intentional misuse, neglect, negligence, damage. AF2296-2008 Holden / Nissan Z145A HP-2008
• That has been improperly maintained, operated or installed. AF2296-2010 Ford Falcon BA-FG 5.4L V8, BF FPV F6 Z516 HP-2010
• Has not been installed with accordance with the vehicle, engine AF2296-3001 Ford Falcon 6 & 8 Fits Ford 6 & 8 cyl Z9 HP-3001
manufacturer’s recommendations. AF2296-3002 Chev long Z24 HP-3002
• Has not been installed in accordance with current Aeroflow published
catalogue vehicle listings.
• Is subject to any other external factor outside of the control of Aeroflow.
• Has not been used for its intended purpose.

Anti Drain Bypass- Outside PSI Relief Thread

Part No Back Valve: Valve:
Height
Diameter Valve Specification
AF2296-1001 Yes No 79.37mm 3-1/8” 76.2mm 3” None M18 x 1.5
AF2296-1002 Yes Yes 95.25mm 3-3/4” 76mm 3” 11-14 3/4-16
AF2296-1003 Yes Yes 84.5mm 3-21/64” 68.26mm 2-11/16” 11-17 3/4-16
AF2296-1004 Yes Yes 86.52mm 3-13/32” 80mm 3-5/32” 11-17 M20 x 1.5
AF2296-1007 Yes No 95.25mm 3-3/4” 76.2mm 3” None 13/16-16
AF2296-1008 Yes Yes 73mm 2-7/8” 68.26mm 2-11/16” 11-17 M20 x 1.5
AF2296-1010 Yes Yes 95.25mm 3-3/4” 68.26mm 2-11/16” 11-17 M20 x 1.5
AF2296-1017 Yes Yes 95mm 3.75” 76.2mm 3” 11-17 M22 x 1.5
AF2296-2001 Yes No 129.38mm 5-3/32” 76.2mm 3” None M18 x 1.5
AF2296-2002 No Yes 119mm 4-11/16” 93.66mm 3-11/16” None 13/16-16
AF2296-2003 Yes No 119mm 4-11/16” 96mm 3-25/32” None 13/16-16
AF2296-2004 Yes Yes 101.6mm 4” 92.86mm 3-21/32” 8-11 3/4-16
AF2296-2008 Yes No 107mm 4-7/32” 80mm 3-5/32” None 3/4-16
AF2296-2010 Yes Yes 101.6mm 4” 92.86mm 3-21/32” 11-17 M22 x 1.5
AF2296-3001 Yes Yes 145.25mm 5-23/32” 92.86mm 3-21/32” 8-11 3/4-16
AF2296-3002 Yes Yes 145.25mm 5-23/32” 94mm 3-45/64” Yes 13/16-16

UNIVERSAL OIL FILTER CUTTER

Want to see the contaminants that your oil filter has prevented from destroy-
ing your engine? That’s now easier than before with the Aeroflow oil filter cut-
ters to cut your filter so you can scrutinize the particles confined inside. Much
like a hand held tubing cutter, they use a cutting wheel and a pair of opposing
ball bearings to easily rotate the filters as they cut. Made from aluminium to
guarantee ease of use and durability.

Part No Description

AF98-2047 Universal Oil Filter Cutter

AF59-2047 Replacement cutting blades (2 pack)

130 aeroflowperformance.com
 OIL SYSTEMS & ACCESSORIES

UNIVERSAL BILLET RE-USABLE OIL FILTERS width

Our Billet reusable high flow oil filters have a stainless steel 30 micron filter Length
element that can be easily cleaned and re-used. Has internal by-pass. This
Universal filter has a dual O-ring base with 1” thread with screw in adapters Suits Aeroflow
which take oil filters with 3/4”-16, 13/16”-16, M18x1.5, M20x1.5 and M22x1.5 Oil Filters
thread. Has built in 1” Hex on bottom for easy removal. Filter Dimensions:
Small AF2296-2008
height 4-3/8” (110mm) x diameter 3-7/8” (97mm)
(No Bypass)

Part No O-Ring Dia. Colour Large AF2296-3001

(With Bypass)
AF64-2016BLK 65mm (2-9/16”) up to 85mm (3-11/32”) Black
AF64-2016P 65mm (2-9/16”) up to 85mm (3-11/32”) Polished
AF59-2016-30 30 micron s/s element suits light - medium weight oils (0-20W).
AF59-2016-60 60 micron s/s element suits heavy weight oils (20-50W). DUAL BILLET REMOTE FILTER HEAD
AF59-2016 Replacement o-rings, thread inserts & drain back valve Side Entry
AF98-2034 Replacement oil filter splitting tool Machined from 6061-T6 billet aluminium. utilising side entry -8ORB inlet and
outlet ports. Provides superior engine protection. Perfect combination when
used with Aeroflows Billet Oil filters! Includes 2 x 1/8” NPT ports.Length
100mm (3-15/16”). Width 190mm (7-31/64”)
Suits Aeroflow NOTE: Must use two oil filters.

OILING SYSTEMS & ACCESSORIES

Oil Filters
Small AF2296-2008 (No Bypass)
Large AF2296-3001 (With Bypass)
Part No Description
AF64-2089 3/4” -16 filter thread (2 -8 port plugs included)
AF59-2075 Replacement 3/4” -16 thread insert

Length width

BILLET REMOTE FILTER HEAD

Top Entry
For use with filter relocation, suits universal applications. Hard
anodised black finish. Top entry -8 ORB inlet & outlet ports.
Length 101mm (3-25/64”). Width 77.9mm (3-1/16”)

Part No Description
AF64-2075 3/4” -16 filter thread
AF59-2075 Replacement 3/4” -16 thread insert

width Suits Aeroflow

Oil Filters
Small AF2296-2008 OIL FILTER RELOCATION KIT
(No Bypass)
Fast and easy no mess oil changes are now possible thanks to Aeroflow’s
Large AF2296-3001 Universal Oil Filter Relocation System!
(With Bypass) The system contains an adapter to convert the stock filter landing to an oil
passage, a remote single filter mount and 2.5 metres (8.2ft) of -10 braided
hose for custom fit oil lines. Anodised aluminium ORB fittings eliminate messy
Length sealants, thread tape and the chance of cracking the housing due to over
tightening.

Part No Description
BILLET REMOTE FILTER HEAD
Side Entry AF64-2042 Billet oil filter remote mount kit (-10 hose)
For use with filter relocation, suits left or right entry. Double
Universal Oil Filter Relocation Systems fit engines with the following spin-on
black anodised finish. Side entry -8 ORB inlet & outlet ports.
oil filter thread sizes:
Length 80mm (3-9/64”). Width 113mm (4-29/64”)
3/4”-16 , 13/16”-16 , 1”-12 , 18 x 1.5mm , 20 x 1.5mm and 22 x 1.5mm. They
are designed for the use of oil filters with a thread size of 3/4”-16, such as
Part No Description AF64-2016S or AF64-2016BLK or equivalent.

AF64-2061 3/4” -16 filter thread (2 -8 port plugs included) NOTE: OIL FILTER NOT INCLUDED.
Includes 1 x 1/8” NPT port.
AF59-2075 Replacement 3/4” -16 thread insert
aeroflowperformance.com 131
 OIL SYSTEMS & ACCESSORIES

AF64-2086

AF64-2094

ENGINE OIL
RESTRICTOR KIT OIL COOLER THREAD INSERTS
• Reduces oil flow to upper engine assembly.
These thread inserts are included in our Billet cooler and adapter kits but
• Reduces power-robbing windage.
are sold separatelty if required. These thread inserts are suitable for use with
• Do not use with hydraulic lifters.
AF64-2108 and AF64-2098
Part No Description
Part No Thread Size
AF64-2086 Pre 1986 Chevy oil restrictor kit
AF64-2097 Chevy Motown Block oil restrictor kit AF59-2108-34 3/4”-16
AF64-2094* Ford Cleveland oil restrictor kit AF59-2108-1316 13/16” -16
*Only used with high volume oil pump and only in AF59-2108-M18 M18 x 1.5
left hand side (Passenger AUS) of motor. AF59-2108-M20 M20 x 1.5
AF59-2108-M22 M22 x 1.5

OIL FILTER THREAD GUIDE

MAKE MODEL YEAR COMPATABLE WITH FILTER THREAD
AUDI 80,90,100,200,5+5, FOX 1967 - 1992 Z63 3/4” - 16
BMW 320i,318i,320i,520i 1973 - 1991 Z88A 3/4” - 16
BMW 2002,320,318i,520 1973 - 1987 Z422 3/4” - 16
BMW 323i,325e,325i,525e 1978 - 1995 Z63 3/4” - 16
CHEV V8 & 6 CYL Z24 13/16” - 16
CHRYSLER VALIANT-SLANT 6, HEMI ALL - 1973 Z9/Z96 3/4” - 16
OILING SYSTEMS & ACCESSORIES

DATSUN P510, 1600 3/4” - 16

FORD CAPRI 1.6 1989 - 1995 Z79A M20 x 1.5
FORD CORTINA - 6 CYL 1974 - 1982 Z9 3/4” - 16
FORD FALCON, FAIRMONT 1960 - 2001 Z9 3/4” - 16
FORD FESTIVA 1992 - 2000 Z79A M20 x 1.5
FORD LASER, METEOR 1981 - 2001 Z79A M20 x 1.5
FORD TELSTAR, TX5 4 CYL 1983 - 1992 Z56B M20 x 1.5
FORD TELSTAR, TX5 V6 1992 - 1998 Z411 M20 x 1.5
HOLDEN V8 & 6 CYL 1963 - 1984 Z30 13/16” - 16
HOLDEN APOLLO 1989 -1995 Z158/Z38 3/4” - 16
HOLDEN COMM 4,6 & 8 CYL 1978 - 1991 Z30 13/16” - 16
HOLDEN COMM VL (NISSAN) 6 CYL 1986 - 1988 Z145A 3/4” - 16
HOLDEN COMM VP - VU (V6) 1988 - 2001 Z154 M18 x 1.5
HOLDEN COMM VP - VZ (V8) 1988 - 2004 Z160 13/16” - 16
HOLDEN GEMINI, PETROL 1975 - 1987 Z56B M20 x 1.5
HONDA ACCORD, PRELUDE 1.8 1983 - 1985 Z148A M20 x 1.5
HONDA ACCORD 4CYL 1986 - 2001 Z79A M20 x 1.5
HONDA CRX 1988 - 1998 Z79A M20 x 1.5
HONDA INTEGRA 1987 - 2001 Z79A M20 x 1.5
HONDA PRELUDE 1985 - 2001 Z79A M20 x 1.5
HYUNDAI EXCEL 1986 - 2001 Z142A M20 x 1.5
HYUNDAI LANTRA/ELANTRA 1993 - 2001 Z142A M20 x 1.5
KIA CARNIVAL 1998 - 2001 M20 x 1.5
MAZDA 323, A5, A6, A8 1980 - 2001 Z79A M20 x 1.5
MAZDA 626, (2.0- 2.2) 1987 - 1994 Z148A M20 x 1.5
MAZDA MX5 1989 - 2001 Z79A M20 x 1.5
MAZDA MX6 TURBO 1987 - 1991 Z56B M20 x 1.5
MAZDA RX3, RX4, RX5, RX7 1972 - 1985 Z148A M20 x 1.5
MAZDA RX7 1986 - 1992 Z79A M20 x 1.5
MITSUBISHI ALL MODELS 1978 - 2001 VARIOUS M20 x 1.5
NISSAN 180B, 200B 1972 - 1981 Z115 3/4” - 16
NISSAN 240K/Z, 260Z, 280Z/ZX 1971 - 1984 Z115 3/4” - 16
NISSAN 300ZX, TURBO & GTR-GTS 1984 - 1997 145A 3/4” - 16
NISSAN 200SX, SR20DET 1997 - 2001 Z445 M20 x 1.5
NISSAN EXA 1983 - 1991 Z145A 3/4” - 16
NISSAN PATROL, GQ 4.2 1987 - 1997 Z170 3/4” - 16
NISSAN PULSAR N12 inc TURBO 1980 - 1987 Z145A 3/4” - 16
NISSAN PULSAR N13 1.6-1.8 1987 - 1991 Z154 3/4” - 16
NISSAN PULSAR N14 1.6 1991 - 1998 Z145A 3/4” - 16
NISSAN PULSAR N14 2.0, NX &NXR 1991 - 1997 Z442 3/4” - 16
NISSAN STANZA 1978 - 1983 Z115 3/4” - 16
PORSCHE 924, 944 1976 - 1982 Z63 3/4” - 16
ROVER MOST V8 1977 ON Z9 3/4” - 16
SAAB ALL MODELS 1973 - 1981 Z89A 3/4” - 16
SUBARU IMPREZA, inc WRX 1993 - 2001 Z495 M20 x 1.5
SUBARU LIBERTY 1989 - 2001 Z495 M20 x 1.5
SUZUKI VITARA 1.6 Z172 3/4” - 16
TOYOTA Most petrol models 1972 - 2001 VARIOUS 3/4” - 16
VOLVO ALL MODELS 1969 - 1990 Z89A 3/4” - 16
VW Water cooled model 1976 - 1983 Z63 3/4” - 16

132 aeroflowperformance.com
 OIL SYSTEMS & ACCESSORIES

BILLET REMOTE BLOCK ADAPTER

Universal fitment with a range of adapters to suit various makes
BILLET SANDWICH ADAPTER and models. -8 orb inlet and outlet ports.
NOTE: Thread adapter MUST be screwed into block adapter first
Universal fitment with a range of adapters to suit various makes NOT onto engine block. This will guarantee full thread engagement.
and models. -8ORB inlet and outlet ports

Part No Block Thread Seal I.D. O.D.

Part No Block Thread Seal I.D. O.D.
AF64-2076 3/4”-16 62mm(2-7/16) - 87mm(3-3/8)
AF64-2060 3/4”-16 62mm(2-7/16) - 87mm(3-3/8) 13/16” -16
13/16”–16 M18 x 1.5
M18 x 1.5 M20 x 1.5
M20 x 1.5 M22 x 1.5
M22 x 1.5 AF59-2076 Replacement O-rings
AF59-2060 Replacement O-rings AF59-2016 Replacement thread inserts

Note: Please check oil filter landing for above sizes Note: Please check oil filter landing for above sizes
and other fitments and other fitments

Cooler return
Cooler feed
B

Thread inserts included

3/4” -16 Gold
13/16-16 Blue C

OILING SYSTEMS & ACCESSORIES

M18 x 1.5mm Silver
M20 x 1.5mm Black
M22 x 1.5mm Green
Engine return
A
BILLET 90o LOW PROFILE OIL THERMOSTAT
Engine feed

BLOCK ADAPTER Perfect for use with Aeroflow oil coolers this thermostat helps maintain engine
Aeroflow’s Billet Low Profile Block Adapter is perfect for clearing tight spots oil temperature by holding the oil until it reaches operating temperature (82oC)
like engine conversions with tight chassis rails! Universal threads and 180oF and then opens to allow full flow to the oil cooler. It adjusts flow according
features 2 x 1/8” NPT auxiliary ports that are 25mm deep! -8 ORB inlet and to oil temperature to maintain constant operating oil temperature. M8x1.25
outlet ports. mounting bolts NOT INCLUDED.
NOTE: Thread adapter MUST be screwed into block adapter head first B Length 50mm (1-63/64”) C Width 35mm (1-3/8”) A Height 107mm (4-7/32”)
NOT onto engine block. This will guarantee full thread engagement.
Part No Description
Part No Description
AF64-4111 Oil thermostat block with -10 ORB fittings
AF64-2098 Billet sandwich adapter low profile
AF59-4111 Replacement thermostat
AF59-2016 Replacement thread inserts

Top View

Bottom View A

B
BILLET 6061-T6 OIL COOLER & Suits Aeroflow
Oil Filters C
SENDER ADAPTER Small AF2296-2008 (No Bypass)
Large AF2296-3001 (With Bypass)
Aeroflow’s billet 6061-T6 aluminium oil cooler and sender adapter allows the
adaptation of an oil cooler and/or a gauge sender and/or oil feed to most en-
gines while maintaining the stock oil filter location. With 2 x -8 ORB ports not
BILLET REMOTE FILTER HEAD
only allows the addition of an oil cooler but the 2 x 1/8 NPT ports lets you run With Thermostat
both a pressure, temp gauge or oil feed line, 1/8 NPT plugs included. Fits Perfect for use with Aeroflow oil coolers this Remote filter head has a thermostat
most makes and model - GM Holden, Ford, Nissan, Toyota, Subaru, Honda & built in to help maintain engine oil temperature by holding the oil until it reaches
BMW. Includes 5 thread inserts. operating temperature (82oC) 180oF and then opens to allow full flow to the oil
cooler. It adjusts flow according to oil temperature to maintain constant operating
Part No Block Adapters Seal I.D. O.D. oil temperature.Hard anodised black finish. -10 ORB inlet & outlet ports.
M8x1.25 mounting bolts NOT INCLUDED.
AF64-2108 3/4”-16 2-9/16” - 2-13/16” B Length 86mm (3-3/8”) C Width 53mm (2-13/16”) A Height 107mm (4-7/32”)
13/16” -16 65mm - 71mm
M18 x 1.5
Part No Description
M20 x 1.5
M22 x 1.5
AF64-4112 3/4” -16 filter thread with thermostat
Replacement o-ring AF59-2108
AF59-2075 Replacement 3/4” -16 thread insert
Note: Please check oil filter landing for above sizes and other fitments
aeroflowperformance.com 133
 OIL SYSTEMS & ACCESSORIES

AF64-2084BLK

AF64-2114BLK
Bottom View
Top View

OIL COOLER LINE KIT

Aeroflows Universal Oil Cooler adapter and line kit has been designed for
the ultimate in high performance and reliability. This Oil Cooler line kit offers
our black light weight 450 series hose and our 550 one piece fittings. The
universal sandwich plate not only allows the user to install an oil cooler but
also offers 2 x 1/8 NPT ports for auxiliary inputs. This kit is a simple fix to all
install problems. Fits most makes and model - GM Holden, Ford, Nissan,
Toyota, Subaru, Honda & BMW.
AF64-2184BLK
Part No Description

AF30-4000 Kit Includes: 3m (9ft 10-1/8”) 450 series hose,

2 x 90 deg -10 fittings, 2 x straight -10 fittings,
4 x ORB fittings, 1 x Billet Adapter,
1 x O-Ring 2-9/16” - 2-13/16” (65-71mm), BILLET LS OIL COOLER ADAPTERS
OILING SYSTEMS & ACCESSORIES

2 x 1/8” Port Plugs

5 x Thread inserts: M18 x1.5, M20 x1.5, M22 x1.5, Now you can bolt on oil coolers and redirect your engine oil with these LS
3/4” -16, 13/16” -16 oil cooler adapters. AF64-2114BLK is designed to directly bolt in place of
the factory bypass cover on front sump LS Chevy engines (VT-VX-VY &
VZ Commodore, 04-06 GTO) allowing you to run an oil cooler. This adapter
feature’s 2 x female -8ORB ports and 2 x 1/8” NPT ports for running temp or
pressure gauges or an oil feed line for a turbocharger or supercharger.
AF64-2084BLK is designed for rear sump LS applications.

This fitting is designed to Part No Description

eliminate the oil bypass found
in Chevrolet engines. It also AF64-2114BLK Suits front sump LS Commodore / GTO
prevents unfiltered oil from AF64-2084BLK Suits LS Series
spilling back into the engine. 2 x -10 ports, 2 x 1/8” NPT ports.
AF64-2184BLK VT-VZ extension to clear block.
AF59-2184 Replacement steel gasket sold individually

BILLET OIL BYPASS ELIMINATOR

Part No Description
GM LS BILLET
AF64-2055BLK Suits SBC spin-on filter mount (Black)
OIL BYPASS
PLATE
Replaces factory bypass plate to Description
allow for oil pressure gauge or
oil pressure feed line. Features hori-
zontal or vertical 1/8” NPT ports.

Part No Description
AF64-2189BLK Features 2 x 1/8” NPT auxiliary ports.

SPIN ON OIL FILTER ADAPTER WITH BY-PASS STANDARD GM

Aeroflow’s small block Chevy canister to spin-on oil filter adapter will fit Chevy
LS CAST OIL
block’s from 1968 to 1999 and will allow the bypass to open when there is BYPASS PLATE
15psi pressure difference in the filter. Manufactured from 6061-T6 Aluminium
for light weight and hard anodised black for case hardness. Replacement OE cast aluminium
bypass plate with gasket.
Part No Description
AF64-2185BLK Suits SBC / BBC with 15psi by-pass
Part No Description
AF82-2302 GM LS oil flow plate
134 aeroflowperformance.com
 OIL SYSTEMS & ACCESSORIES

165m
m (6
-1/2”
)

96m
m (3
-59/6
4”)

90 DEGREE SCAVENGE FILTER

This great 90 degree dry sump pan filter that protects your valuable dry sump
pump from debris in your engine oil. The filter allows for easy cleaning and
inspection without removing the engine sump.
1450 micron screen.

Part No Colour Description

10”x 7-1/2” COMPETITION OIL COOLER
AF64-4100 Blue -12AN 90o inline filter
AF64-4100BLK Black -12AN 90o inline filter Aeroflow’s engine and transmission oil coolers feature 1/2” NPT or
AF64-4100S Silver -12AN 90o inline filter -10 ORB female fittings for a perfect O-ring seal, thermostat wiring, plug kit
AF59-4100 Replacement 1450 micron Screen and a high quality electric fan. It accepts engine oil, transmission and power
steering applications and has been pressure tested to over 200psi (13.79 BAR).
The thermal switch included activates the fan at 79.5°C (175°F). The cooler
also features a fin and plate construction. 350CFM 7” fan draws 6 amps.
The dimensions are 254mm (10”) x 190.5mm (7.5”) .

Part No Description
AF72-6002 Competition oil cooler with fan & thermostat 1/2” NPT
AF72-6003 Competition oil cooler with fan & thermostat -10ORB
AF59-6000 Replacement temperature switch
AF59-6001 Replacement temperature switch wire loom

OILING SYSTEMS & ACCESSORIES

AF59-6002 Replacement 7” (177mm) fan
AF59-6006 Competition oil cooler Replacement Core 1/2” NPT
AF59-6007 Competition oil cooler Replacement Core -10ORB

UNIVERSAL ELECTRIC OIL PUMP

Aeroflow Performance Electric Oil pump is designed to pump engine oil to
essential components of any vehicle. it can be used as an oil cooler circula-
tion pump or as a turbo scavenge pump for low mounted turbos to help drain
oil and avoid oil blowing through seals. This small 12 volt pump operates at
around 0.5 Bar ( 7.25 psi ), and pumps at a rate of 160 litres per hour. Has
15mm ( 5/8” ) spout on the inlet and 8mm ( 5/16” ) spout on the outlet.

Part No Description
AF49-1053 Universal electric oil pump
AF49-1556 Oil pump plug & pins

13.5”x 9” COMPETITION OIL COOLER

Aeroflow’s engine and transmission oil coolers feature 1/2” NPT or
-10 ORB female fittings for a perfect O-ring seal, thermostat wiring, plug kit
and a high quality electric fan. It accepts engine oil, transmission and power
steering applications and has been pressure tested to over 200psi (13.79 BAR).
The thermal switch included activates the fan at 79.5°C (175°F). The cooler
LS CHEVY OIL PRESSURE ADAPTER also features a fin and plate construction. 500CFM 9-1/2” fan draws 6 amps.
The Aeroflow Performance LS series oil pressure gauge adapter is now The dimensions are 342mm (13.5”) x 228mm (9”) .
available in a steel option to provide extra strength from engine vibration.
This adapter allows the use of a standard oil pressure switch which is needed Part No Description
for standard computer and an auxiliary port for use with an aftermarket 1/8”
NPT sender. With the swivel banjo design this adapter will suit all models with AF72-6000 Competition oil cooler with fan & thermostat 1/2” NPT
an M16 x 1.5mm thread. AF72-6001 Competition oil cooler with fan & thermostat -10ORB
AF59-6000 Replacement temperature switch
AF59-6001 Replacement temperature switch wire loom
Part No Description AF59-6003 Replacement 9-1/2” (241mm) fan
AF59-6004 Competition oil cooler Replacement Core 1/2” NPT
AF166-05-02-ST LS Chevy oil pressure adapter AF59-6005 Competition oil cooler Replacement Core -10ORB

aeroflowperformance.com 135
 OIL SYSTEMS & ACCESSORIES

MODULAR OIL COOLERS

Aeroflow offers a tremendous selection of the industry’s highest quality coolers in a wide
range of applications and profiles. These stack plate (modular style) coolers are fully
brazed on all contact surfaces inside and out, further more they have a brazed seam
that withstands vibrations and pulsations in the toughest environment.
Any performance vehicle can benefit from an Aeroflow Cooler.
Motor homes, tow vehicles, passenger cars and even
motorcycles can extended engine and/or transmission
efficiency and life.
Technical Specifications:
• Connections: -10 Female ORB thread,
Adapters to suit any applications
• For use in engines, transmissions,
hydraulic systems, etc.
• Max working pressure is 145 PSI
(1 MPa or10 Bar )
• Burst pressure is 362 PSI
(2.5 MPa or 25 Bar)
• Must use mounting kit in all
Part Number Rows Depth Length Height Thread
performance applications.

AF72-4010 10 51mm 2” 330mm 13” 77mm 3” FEMALE -10 ORB
AF72-4016 16 51mm 2” 330mm 13” 123mm 4-27/32” FEMALE -10 ORB
AF72-4019 19 51mm 2” 330mm 13” 146mm 5-3/4” FEMALE -10 ORB
AF72-4025 25 51mm 2” 330mm 13” 193mm 7-19/32” FEMALE -10 ORB
AF72-4030 30 51mm 2” 330mm 13” 231mm 9-3/32” FEMALE -10 ORB
AF72-4034 34 51mm 2” 330mm 13” 265mm 10-7/16” FEMALE -10 ORB
AF72-4040 40 51mm 2” 330mm 13” 312mm 12-9/32” FEMALE -10 ORB
OILING SYSTEMS & ACCESSORIES

MODULAR OIL COOLER MOUNTING KIT 11”x 6” OIL COOLER

Properly mount your Aeroflow Oil Cooler with this Universal Aeroflow oil
cooler mounting bracket (Simply cut on the line of how many row cooler Aeroflow’s transmission, power steering or engine oil cooler features two 3/8
you have). It is made from quality materials for strength and durability. This “(9.6mm) extended barb fittings. Cooler measures 11”( 279.4mm) length, 6”
bracket securely holds the modular oil cooler preventing vibration damage. (152.4mm) width and 1-1/2”( 38.1mm) thick. Pressure tested to 175psi.
The bracket is pre-drilled for ease of mounting to any surface and comes
complete with all necessary hardware to mount the cooler. Part No Description
Part No Description AF72-6051 Oil cooler ONLY

AF72-4000 Modular oil cooler mounting kit suits all sizes.

FRAME RAIL FLUID COOLER

This Aeroflow Performance slimline fluid cooler is great for those wanting
to keep your auxiliary fluids down in temperature under extreme conditions.
This slim frame rail design is great to mount onto the frame rail next to the
11”x 6” OIL COOLER KIT transmission saving on space and cost of lines and fittings. These coolers
feature ½” ( 12.70mm ) copper tubing expanded into aluminium cooling fins
Aeroflow’s transmission, power steering or engine oil cooler kit features with extruded plastic cooling fin guards. This small 2 pass fluid cooler is great
two 3/8 “(9.6mm) extended barb fittings. Included in this kit is the oil cooler for those with minimal room and the two -6an fittings on the end allow for
measuring 11”( 279.4mm) length, 6” (152.4mm) width and 1-1/2”( 38.1mm) universal plumbing applications. Finished in a black powder coat for long
thick. 1.6 meters (5.24ft) of 500 series rubber hose, hose clamps to suit and lasting durability.
all mounting hardware necessary to mount the oil cooler. Pressure tested to
175psi.
Part No Description
Part No Description
AF72-6015 Length: 350mm ( 13-5/8” )
AF72-6050 Oil cooler kit Width: 63.5mm ( 2-5/8” )
Thickness: 45mm ( 1-3/4” )
136 aeroflowperformance.com
 OIL SYSTEMS & ACCESSORIES

VT-VZ LS Chev
Front Sump

VE-VF LS Chev
Rear Sump

COMPACT POWER STEERING /

FUEL COOLER
This Aeroflow Performance compact fluid cooler is great for those wanting to COMPETITION BAFFLE INSERT TO SUIT
keep your fuel or power steering fluids down in temperature under extreme
conditions. These coolers feature 12.70mm (1/2”) copper tubing expanded
LS CHEVY
into aluminium cooling fins with extruded plastic cooling fin guards. This small LS series Chevy’s are prone to oil starvation at high speed cornering, braking
2 pass fluid cooler is great for those with minimal room and the two -6AN and acceleration, especially at high RPM where oil windage is more common.
fittings on the end allow for universal plumbing applications. Finished in a Aeroflow’s baffle plate with trap doors completely encloses the oil pump pickup
black powder coat for long lasting durability. for protection and oil starvation in racing conditions and when oil level is low.
This baffle plate with trap doors is a direct replacement for the stock baffle.
Part No Description Manufactured from aircraft grade aluminium and designed to fit Commodore
VT - VF. Note: Some modifications required to fit early LS pans.
AF72-6010 Length: 206mm ( 8-7/8” )
Width: 70mm ( 2-5/8” )
Thickness: 48mm ( 1-3/4” ) Part No Description
AF82-2010 VT-VZ LS Chev baffle insert suits Commodore / GTO pan
AF82-2011 VE-VF LS Chev baffle insert suits Commodore / G8 pan

OILING SYSTEMS & ACCESSORIES

GM LS SERIES WINDAGE TRAY
LARGE POWER STEERING /
Aeroflow’s GM LS series louvered windage tray suits front and rear sump
FUEL COOLER oil pans whether standard or aftermarket. Great for improved oil control in
This Aeroflow Performance large fluid cooler is great for those wanting to peformance applications. Clears up to 4” stroke and suits ARP main studs.
keep your fuel or power steering fluids down in temperature under extreme NOTE: Clearancing required for mid mounted oil pickup in VE-VF models.
conditions with high demanding applications. These coolers feature 12.70mm
(1/2”) copper tubing expanded into aluminium cooling fins with extruded Part No Description
plastic cooling fin guards. This 4 pass fluid cooler is great for those wanting
optimal cooling capacity for their auxiliary fluids such as power steering. AF82-2020 LS louvered windage tray
The two -6an fittings on the end allow for universal plumbing applications.
Finished in a black powder coat for long lasting durability.

Part No Description AF59-2001

AF72-6011 Length: 206mm ( 8-7/8” )

Width: 127mm ( 5” )
Thickness: 19mm ( 3/4” )
AF59-2003

MAGNETIC DRAIN PLUGS

Aeroflow performance magnetic drain plug traps particles to prevent
recirculation and engine damage. With a pre drilled hole in the hex head
to wrap up some safety wire (except AF59-2001) and new gasket provided.
With many thread sizes available to suit most makes and models. We
recommend maximum torque rating of 20ft/lbs ( 27 NM )

Part No Description

AF59-2001 1/2” - 20 Suits most Aeroflow pans (NOTE: NOT DRILLED)

AF59-2003 M12 X 1.25mm suits most models from Nissan , Infiniti,
Lexus , Toyota , Scion.
AF59-2004 M14 X 1.5mm suits most models from Honda ,
Mitsubishi , Saab , Hyundai , Ford Focus/Fiesta , Mazda
AF59-2005 M16 X 1.5mm suits most models from Subaru , BMW ,
Scion , Peugeot, Renault , Mini Cooper
AF59-2006 M20 X 1.5mm suits most models from Subaru , Porsche

aeroflowperformance.com 137
 OIL PANS

STANDARD REPLACEMENT OIL PANS

Aeroflow now offer factory style steel replacement pans for most popular V8 engines. Save repairing your rusty, beaten up, leaky 40 year old oil pans or searching
wrecking yards for substandard replacements! Available in chrome, black and raw unpainted finishes.
23.5mm
59/64”

210mm
8-17/64”
95mm
3-47/64”

182mm
7-11/16”

200mm 140mm
95mm
7-7/8” 3-47/64”
5-33/64”

SUITS CHEVY S/B CHEV RH DIPSTICK

SUITS HOLDEN 253-308 HQ-WB
1986 ONWARDS
HOLDEN, TORANA LH-UC
Part No Description
Part No Description
AF82-9414C Chrome
AF82-7002C Chrome AF82-9414BLK Black
AF82-7002BLK Black AF82-9414 Raw
AF82-7002 Raw
OILING SYSTEMS & ACCESSORIES

210mm
8-17/64” 220mm
8-21/32”

182mm

200mm
7-7/8”
7-11/16”

140mm
95mm 122mm
5-33/64”
3-47/64” 100mm
4-51/64”
3-15/16”
SUITS CHEVY S/B CHEV LH DIPSTICK
REAR SUMP SUITS FORD 289-302W FRONT SUMP
Part No Description Part No Description
AF82-9005C Chrome AF82-9078C Chrome
AF82-9005BLK Black AF82-9078BLK Black
AF82-9005 Raw AF82-9078 Raw

210mm
8-17/64”
210mm
8-17/64”

182mm 210mm
7-11/16”
8-17/64”

125mm
140mm 100mm
95mm 5-33/64”
4-59/64”
3-47/64” 3-15/16”

SUITS CHEVY S/B CHEV RH DIPSTICK SUITS FORD 351C FRONT SUMP
REAR SUMP
Part No Description
Part No Description
AF82-9310C Chrome
AF82-9092C Chrome AF82-9310BLK Black
AF82-9092BLK Black AF82-9310 Raw
AF82-9092 Raw

138 aeroflowperformance.com
 OIL PANS

LS SERIES CONVERSION PANS

541mm 21-19/64”

53mm 82mm
2-5/64” 3-7/32”150mm
5-29/32” AF82-2301

193mm
7-19/32”

541mm 21-19/64”
29mm
58mm 2-9/32”

OILING SYSTEMS & ACCESSORIES

1-9/64 76mm 139mm
541mm 21-19/64” 2-63/64” 5-15/32”
AF82-2300
53mm 82mm
2-5/64” 3-7/32”150mm
5-29/32” AF82-2301

248mm
9-49/64”

193mm
7-19/32”
LS CONVERSION OIL PAN EXTRA
CLEARANCE
LS CONVERSION OIL PAN The factory GM LS pans don’t always fit or they hang too low for a lot of
The factory GM LS pans don’t always541mm fit or they hang too low for a lot of conversion applications. The Aeroflow Performance LS conversion oil pan is
21-19/64”
conversion applications. The Aeroflow Performance LS conversion oil pan designed to help! It provides maximum extra clearance to the chassis frames
29mm
is designed 58mm
1-9/64 to help! Designed for LS
2-9/32” engine conversion installations where and ground. Designed for LS engine conversion installations where you re-
76mm 139mm
you require more oil pan to chassis2-63/64”
frame clearance around the front half of quire more oil pan to chassis frame clearance around the front half of the oil
5-15/32”
the oil pan. This cast aluminium oil pan is modelled off theAF82-2300
OEM GM LS oil pan. This cast aluminium oil pan is modelled off the OEM GM LS oil pan so
pan so it shares OEM oil filter mounting, OEM oil cooler port provision, OEM it shares OEM oil filter mounting, OEM oil cooler port provision, OEM engine
engine NVH suppression, OEM flange gasket and sealing and OEM bell- NVH suppression, OEM flange gasket and sealing and OEM bell-housing
housing attachments. Complete kit includes sump baffle, OE style pick-up attachments.
tube, sump plug, oil filter stud, oil passage cover. 248mm
Complete kit includes sump baffle, OE style pick-up tube, sump plug, oil filter
Capacity : 5.85 Litres (6.18 quarts) 9-49/64” stud, oil passage cover,.
Max crank stroke: 4.25” Capacity : 5.85 Litres (6.18 quarts)
Recommended oil filter: AF2296-1017 Max crank stroke: 3.62”
Recommended oil filter: AF2296-1017
Part No Description
Part No Description
AF82-2301 LS ConversionDescription
pan
AF82-2300 LS Conversion pan with extra clearance

AF82-2406
AF82-2407

OIL PAN PICK UPS AF82-2014

Part No Description

AF82-2407 Suits front sump Holden V8

AF82-2406 Suits rear sump Holden V8
AF82-2405 Suits rear sump LS into Holden
AF82-2409 Suits front sump LS into Holden
AF82-2408 LS oil pickup tube support brace. AF82-2408
AF82-2021 Nissan RB20, RB25 & RB30 AF82-2409 LS oil pickup tube support brace.
AF82-2025 Mitsubishi 4G63 EVO 4 to 9
AF82-2027 Subaru EJ20 & EJ25

aeroflowperformance.com 139
 OIL PANS

SUPER OIL PANS

Aeroflow’s range of super oil pans available for most popular V8 engines are the perfect choice for street or track driven high performance engines. These pans start
out as new stamped steel pans which are customised with specially designed extra oil capacity wings. These wings allow extra oil capacity without affecting ground
clearance which helps maintain more constant oil temperatures for reliability and feature windage trays and crank scrapers. Available in black finish. Pans have 6.5
Litre (6.86 US Quarts) capacity.
NOTE: Pickups are NOT included with pans.

275mm 10-13/16”
355.6mm 14”
355.6mm 14”

AF82-2102
AF82-2016 AF82-2016

270mm 10-5/8”
171.45mm 6.75” 171.45mm 6.75”

SUITS HOLDEN (GM AUSTRALIA)

200mm 7-7/8”
253-308 VB -VT

152.4mm 6”
152.4mm 6”

AF82-2407 125mm
85mm
Part No Description 45.72mm 4-59/64” 45.72mm
3-11/32”
1-51/64” 1-51/64”
AF82-2102 Sump suits Holden 253-308 into VB-VT
AF82-2407 Oil pickup suits front sump Holden V8

269mm 10-19/32”
265mm 10-7/16”
265mm 10-7/16”
OILING SYSTEMS & ACCESSORIES

AF82-2101 AF82-2101
AF82-2201

226mm9-1/64”
8-57/64”
SUITS HOLDEN (GM AUSTRALIA)
226mm 8-57/64” 229mm
275mm 154mm
355.6mm 14”

253-308 HQ -WB, LH-UC AF82-2102

195mm 7-43/64”
154mm 6-1/16”

AF82-2016
10-13/16”

Part No Description 140mm

46mm 46mm
95mm
6-1/16”

5-33/64”
AF82-2101 Suits Holden 253-308 HQ -WB, LH-UC 1-13/16” 1-13/16”
3-47/64”
AF82-2406 Oil pickup suits Rear sump Holden V8
270mm 10-5/8”
171.45mm 6.75”
200mm 7-7/8”
152.4mm 6”

125mm
85mm
AF82-2201
260mm 10-15/64”

4-59/64”
260mm 10-15/64”

356mm 14-1/64”

45.72mm 3-11/32”
1-51/64”
AF82-2014 AF82-2014
AF82-2001

AF82-2201-RH
AF82-2201-1PC
300mm 11-13/16” 300mm 11-13/16”

215mm 8-15/32” 215mm

220mm 8-15/32”
8-21/32”
269mm
265mm 10-7/16”

150mm
150mm 5-29/32”

217mm 8-35/64”

AF82-2101 AF82-2201
10-19/32”

SUITS S/B CHEVY INTO 125mm

5-29/32”

47mm 100mm
47mm
4-59/64”
(GM AUSTRALIA) HQ-WB 1-27/32” 3-15/16”
1-27/32”

Fits most chassis (except 1962-67 chevy II, V8 Vega & Monza)
All 3 sumps have same dimensions same 8-57/64”
226mm as AF82-2201 229mm 9-1/64”

Part No Description
195mm 7-43/64”
154mm 6-1/16”

AF82-2201 2pc rear main seal.

140mm
AF82-2201-1PC 1pc rear main seal. 46mm 95mm
AF82-2201-RH 2pc R/H Dipstick 5-33/64”
1-13/16” 3-47/64”
320mm
320mm 12-19/32”

70mm
1-61/64”
50mm

2-3/4”
140 aeroflowperformance.com
AF82-2002 AF82-2002
12-19/32”

410mm 16-9/64”
”
 265mm 10-7/16”
AF82-2101
OIL PANS

226mm 8-57/64”

Pressure Return

154mm 6-1/16”
OUTLET INLET
46mm
1-13/16”

AF82-2405

260mm 10-15/64”
TO SUIT LS SERIES CHEVY INTO AF82-2014
HOLDEN (GM AUSTRALIA) HQ-WB
Conversion pan for rear sump applications. With trap door.
Fits: 1968-72 Nova, 1965-72 Chevelle, 1967-69 Camaro, can also be used in 300mm 11-13/16”
additional applications; check dimensions for clearance.
Uses stock block mounted LS dipstick. 215mm 8-15/32”

Part No Description

150mm 5-29/32”
AF82-2014 Description
LS Chev into HQ-WB
AF82-2405 Oil pickup suits rear sump AF82-2014
47mm
1-27/32”

355.6mm 14”
AF82-2016

OILING SYSTEMS & ACCESSORIES

320mm 12-19/32”

171.45mm 6.75”

AF82-2002
152.4mm 6”

AF82-2409
45.72mm

TO SUIT LS SERIES CHEVY INTO FRONT

1-51/64”

SUMP HOLDEN (GM AUSTRALIA)

215mm 8-15/32”

Conversion pan for front sump applications. With trap door.

195mm 7-43/64”

Fits: 1978-2007 front sump Holden Commodores can also be used in

additional applications; check dimensions for clearance. Designed to be used 130mm
with Aeroflow pickup AF82-2409. 95mm
5-1/8”
Uses 1/4” universal dipstick AF64-2123, AF64-2123BLK. 3-47/64”
265mm 10-7/16”

Note: May require crossmember modifications in some model Commodores.

AF82-2101522mm 20.55”
Part No Description 350mm 13.78”
Sump Plug

AF82-2016 Description
LS into front sump Holden
208mm 8.18”

AF82-2409 Oil pickup suits front sump AF82-2016

10.82”

AF82-2023 226mm 8-57/64” AF82-2012

275mm

154mm 6-1/16”
25mm

120mm 46mm
.98”

4.72” 210mm 8.26”

LS REAR SUMP
1-13/16”
100mm

PAN WITH OIL

17mm
6.1”
75mm
3.93”

2.95”

.66”

295mm 11.61”

FILTER ATTACHED
155mm

48mm
1.89”

140mm 5.51”
260mm 10-15/64”

Sump Plug

Conversion pan for rear sump applications. With trap door.

AF82-2014
10.82”

Uses stock block mounted LS dipstick. 135mm

5.31”
AF82-2024
Part No Description AF82-2405
275mm

AF82-2012 LS Rear sump pan Description

with oil filter attachment.
275mm 10.82”
300mm 11-13/16”
AF82-2405 Oil pickup suits rear sump AF82-2012
14.09”

140mm
35mm

25mm
1.37”

215mm 8-15/32”
.98”

5.51”
aeroflowperformance.com 141
150mm
100mm

58mm
3.93”

5mm
.93”

AF82-2018
 OIL PAN ACCESSORIES

LS OIL PAN ACCESSORIES

LS OIL BLOCK ADAPTER

Aeroflow offer the bolt-on oil block adapter separately for the front or rear
GM LS fabricated Aeroflow oil pan. This block is CNC machined from
6061-T6 aluminium and hard anodised black finish. Has 2 x -10 female ORB
fittings includes bolts & o-rings.This block suits front sump oil pan
LS SUMP BOLT-ON OIL ( AF82-2016 ) and rear sump oil pan ( AF82-2012 ).
Length 139mm (5-15/32”), width 41mm (1-39/64”), height 33mm (1-19/64”),
FILTER ADAPTER centre to centre of -10ORB 41mm (1-39/64”).
Aeroflow offer the bolt-on oil filter adapter separately for the front or rear GM Part No
LS fabricated Aeroflow oil pan. This block is CNC machined from 6061-T6
Description
aluminium and hard anodised black finish. This block accepts the OE oil filter
AF82-2013 LS oil block adapter
AF2296-1017. It features 1x 1/4” NPT port for auxillaries. This block suits front
sump oil pan ( AF82-2016 ) and rear sump oil pan ( AF82-2012 ).

Part No Description
GM LS 90O OIL BLOCK Top view
ADAPTER
AF59-2012 LS Sump bolt-on filter adapter
Aeroflow Performance now offer
the bolt-on oil block adapter in a
90 degree ( horizontal ) position.
Still retaining the two female -10
ORB fittings but with the horizontal
outlets is great for tight clearances
to run your remote oil filter lines.
This block suits front sump oil pan
( AF82-2016 ) and rear sump oil pan
( AF82-2012 ). CNC machined
OILING SYSTEMS & ACCESSORIES

from 6061-T6 aluminium and hard Bottom view

anodised black finish.
Length 133mm (5-15/64”), width 41mm (1-39/64”), height 33mm (1-19/64”).

Part No Description
LS SUMP 90O BOLT-ON OIL FILTER AF82-2009 LS 90 degree oil block adapter
FILTER ADAPTER
Aeroflow offer this optional bolt-on oil filter adapter separately for the front or
rear GM LS fabricated Aeroflow oil pan. This block turns the oil filter 90 de-
grees to a horizontal postiton and is CNC machined from 6061-T6 aluminium
and hard anodised black finish. Features 1x 1/4” NPT port for auxillaries.
This block accepts the OE oil filter AF2296-1017. This block suits front sump
oil pan ( AF82-2016 ) and rear sump oil pan ( AF82-2012 ).

Part No Description
AF82-2022 LS sump 90 degree bolt-on filter adapter

GM LS SLIMLINE OIL BLOCK ADAPTER

Aeroflow offer this bolt-on slimline oil block adapter separately for the front
or rear GM LS fabricated Aeroflow oil pans. This block features two -10AN
male fittings facing straight down attached to a slimline plate that bolts to the
Aeroflow LS series oil pans. This block suits front sump oil pan ( AF82-2016 )
and rear sump oil pan ( AF82-2012 ).
Plate thickness 9.52mm (3/8”), total height 33mm (1-19/64”).

Part No Description
GM LS OIL PAN STUD KIT AF82-2030 LS slimline oil block adapter

The Aeroflow Performance oil pan stud kit is designed for use with our
Aeroflow oil pan for all GM LS series engines. Using these studs makes
installing your oil pan a breeze without the hassle of aligning bolts. The REPLACEMENT DRAIN PLUG
serrated faced nuts provide extra grip on the oil pan rail which will prolong
the life of the gasket and prevent oil leaks down the line. Studs are made of -8ORB drain plug.
heat treated Grade 8 steel and zinc plated. To suit GM LS front sump
This set includes : 13 M8 x 1.00mm ( 40mm long ) studs with matching nuts ( AF82-2016 )
2 - M6 x 1.00mm ( 40mm long ) studs with matching nuts GM LS rear sump
( AF82-2012 ).

Part No Description
AF82-2050 LS oil pan stud kit
Part No Description
AF59-2007 Replacement magnetic drain plug.

142 aeroflowperformance.com
 m 6-1/16”
140mm
46mm 95mm

7-43/64”
5-33/64”
1-13/16” 3-47/64”

OIL PANS

260mm 10-15/64”
AF82-2014
260mm 10-15/64”

356mm 14-1/64”
AF82-2014 AF82-2001
300mm 11-13/16”

215mm 8-15/32”

150mm 5-29/32”
300mm 11-13/16”

TO SUIT FORD 302C / 351C XR TO XF

215mm 8-15/32” 220mm 8-21/32”

FALCON (FORD AUSTRALIA)

47mm
150mm 5-29/32”

1-27/32”

217mm 8-35/64”
Most front sump production chassis (except Mustang II)

125mm
100mm
Part No Description 47mm 4-59/64”
1-27/32” 3-15/16”
AF82-2001 Suits Ford 302/351C into (Aust) XR to XF Falcon
522mm 20.55”
350mm 13.78”
Sump Plug

320mm 12-19/32”
208mm 8.18”
10.82”

AF82-2023 AF82-2002 AF82-2012

275mm
320mm 12-19/32”

70mm
1-61/64”
50mm

2-3/4”
AF82-2002
25mm

120mm
.98”

4.72” 210mm 8.26”

OILING SYSTEMS & ACCESSORIES

410mm 16-9/64”
TO SUIT FORD 289W - 302W XR TO XF 215mm 8-15/32”
100mm

4-17/32”

17mm
FALCON (FORD AUSTRALIA)
6.1”
75mm
3.93”

2.95”

115mm

.66”
295mm 11.61”
5-29/32”
150mm
195mm 7-43/64”
155mm

Fits: Ford, Mercury & Cobra kit car front sump applications (except

48mm
Mustang II) AF82-2000

1.89”
215mm 8-15/32” 130mm
140mm 5.51” 95mm
Part No Description 5-1/8”
3-47/64”

5/ m
195mm 7-43/64”

90 35/6

7- 80m
”
3-

64
Sump Plug
mm 4”

AF82-2002 Ford 289-302 Windsor into XR to XF Falcon

1
10.82”

130mm 135mm
95mm 5.31” 210mm
5-1/8” AF82-2024 8-17/64”
3-47/64”
275mm

275mm 10.82”
14.09”

140mm
35mm

25mm
1.37”

.98”

5.51”
100mm

358mm
3.93”

35mm
3.93”

AF82-2018
150mm 5.9”

50mm
1.96”

260mm 10.23”

265mm 10.43”
650mm 25.59”
10.51”

-10AN fitting
-12AN

MITSUBISHI EVOLUTION
Sump Plug
AF82-2019
267mm

Fabricated extra capacity race oil pan that suits Mitsubishi EVO 4 to 9.
Comes with crank scraper, baffle, mounting hardware and oil pickup.
11”

Capacity is 6.1L (6.44 quarts). -10ORB turbo oil drain port. Magnetic drain
plug included. AF82-2026
AF82-2017
280mm

AF82-2025
Part No Description
AF82-2018 Mitsubishi Evolution race oil pan
AF82-2026 Baffle & crank scraper also available separately
AF82-2025 Pick up also available separately
55mm 60mm 205mmaeroflowperformance.com
70mm 143
6.89”

2.16” 2.36” 8” 2.75”

m
 195mm 7-43/64”
154mm 6-1/16”

150mm 5.9”
140mm
46mm 95mm
OIL PANS 5-33/64”

50mm
260mm1-13/16” 3-47/64”

1.96”
10.23”

265mm 10.43”
650mm 25.59”

10.51”
-10AN fitting
-12AN
Sump Plug
AF82-2019

267mm
extension plate
260mm 10-15/64”

356mm 14-1/64”
included

11”
AF82-2017

280mm
AF82-2014 AF82-2001

AF82-2021
300mm 11-13/16” 55mm 60mm 205mm 70mm
6.89”

Pickup 2.16” 2.36” 8” 2.75”

215mm 8-15/32” Sold separately 220mm 8-21/32”
175mm

170mm 6.69”
NISSAN RB20, RB25 & RB30 260mm 10.23”
150mm 5-29/32”

217mm 8-35/64”
178mm 7”
Fabricated front sump oil pan that suits rear wheel drive applications only.
Comes with 2 x -10 male AN fittings and 1 x -12AN female drain plug that can
125mm
also be used for an oil pickup. Comes with -12 plug. Suits RB30
47mm oil pickup. 100mm
Note: If this oil pan is being used in an engine conversion application it is 4-59/64”
1-27/32” 3-15/16”
recommended to check all clearances before installation. Oil capacity is 8L
(8.45 quarts).

6.69”
75mm 2.95”
127mm 5”

50mm 1.96”
Part No Description

170mm
AF82-2017 Nissan RB20, RB25 & RB30 fabricated sump
AF82-2021 Optional high volume pick up suit AF82-2017
AF59-2017 Replacement o-ring for Aeroflow high volume oil pick up.
Suits OEM & AF82-2021
350mm 13.78”
OILING SYSTEMS & ACCESSORIES

320mm 12-19/32”

Sump Plug
70mm
1-61/64”
50mm

2-3/4”

208mm 8.18”
AF82-2002
10.82”

410mm 16-9/64”
AF82-2023

4-17/32”
115mm
275mm
5-29/32”
150mm

215mm 8-15/32”
AF82-2000
TO SUIT NISSAN SR20 180SX - 200SX
SILVIA S13 - S15
25mm

120mm
5/ m
195mm 7-43/64”

.98”

4.72” 2
90 35/6

7- 80m
”
3-

64
mm 4”

(Pan has trap doors & 1/2” NPT port). -8ORB drain plug.
1

Fits: Rear wheel drive applications, 4.5L (4.75 quarts) capacity

100mm

130mm

6.1”
95mm 210mm
75mm
3.93”

2.95”

5-1/8”
Part No Description 3-47/64”
8-17/64”

AF82-2000 Nissan SR20 180SX-200SX into Silvia S13-S15 155mm

140mm 5.51”

Sump Plug
10.82”

AF82-2024
275mm

14.09”

140mm
35mm

25mm
1.37”

.98”

5.51”
MAZDA 13B FRONT SUMP
100mm

358mm
3.93”

35mm

Fabricated front sump oil pan that suits Mazda 13B rotary in RX3 and RX4.
3.93”

Oil pan depth is 101mm (4”). 6.8L (7.18 quarts) oil pan capacity.
Includes mounting hardware.

Part No Description
AF82-2024 Mazda 13B front sump

144 aeroflowperformance.com
.9”
 3.9
3

35
1

35
OIL PANS & DIPSTICKS

150mm 5.9”
260mm 10.23”

10.51”
AF82-2019

267mm

11”
280mm
AF82-2027

SUBARU WRX AF82-2028

Fabricated extra capacity race oil pan that suits Subaru EJ20 and EJ25.
Comes with baffle, mounting hadware and oil pickup & 55mm

6.89”
extension. Capacity is 5.75L (6.07 quarts). 2.16”

Part No

175mm
Description

170mm 6.69”
AF82-2019 Subaru WRX fabricated oil pan

178mm 7”
AF82-2027 Oil pickup also available separately.
AF82-2028 Baffle insert also available separately.

127mm 5”
UNIVERSAL ENGINE DIPSTICKS
AF64-2123

OILING SYSTEMS & ACCESSORIES

Aeroflow Performance universal engine oil dipstick is designed to work with oil pans
that have a built in 1/4” NPT fitting or can be used in any custom application with the
use of a ¼ NPT weld-on. It has an overall length of 20.75” ( 527mm ) which can be
cut down to suit most custom applications. Just like a range of dipstick it features 308
stainless steel braided covering over PTFE liner, billet handles and the double O-rings

AF64-2109BLK
for extra security against crankcase gasses escaping. Available in chrome or black AF64-2105BLK
anodised.

AF64-2109
AF64-2105
AF64-2123BLK

Part No Finish Description

AF64-2123 Chrome UniversalDescription
engine dipstick
AF64-2123BLK Black Universal engine dipstick

ENGINE DIPSTICKS
AF64-2110BLK

Aeroflow’s Flexible Engine Dipsticks are 308 stainless steel braided covering
over a hard-wearing high quality PTFE liner. The handle and ends are made
from 6061-T6 then hand polished and chrome plated or black anodised. A
double o-ring seal keeps dipstick secured in tube and prevents crankcase
gasses from escaping. These not only look great but the flexible inner
dipstick is marked to give accurate oil level readings.

Part No Description
AF64-2105 Chrome Suits Holden V8 253-308
AF64-2111BLK

AF64-2105BLK Black Suits Holden V8 253-308

AF64-2109 Chrome Suits SBC, late model, drivers side.
AF64-2109BLK Black Suits SBC, late model, drivers side.
AF64-2110 Chrome Suits SBC, early model, passengers side.
AF64-2111
AF64-2110

AF64-2110BLK Black Suits SBC, early model, passengers side.

AF64-2111 Chrome Suits LS Series Chevy (block mount)
AF64-2111BLK Black Suits LS Series Chevy (block mount)
AF64-2112 Chrome Suits Ford 302 - 351C
AF64-2112BLK Black Suits Ford 302 - 351C

K
112BL
AF64-2

112
AF64-2

aeroflowperformance.com 145
 FABRICATED TANKS
HOSE & TUBE

Note: Can also be used

with water or Methanol
injection, intercooler water
spray.
LIGHT WEIGHT

FABRICATED RADIATOR OVERFLOW

FITTINGS

TANKS TO SUIT FORD MUSTANG 2015 ON

Designed for 2015 + Ford Mustang is the Aeroflow Performance Fabricated
radiator overflow tank. This is a direct bolt-in replacement to the stock 2
piece plastic tank which can fail after repeated high heat situations. This
tank utilizes the factory stock vented radiator cap and bleeds pressure just
like the factory intended it to be. The tank is available in both polished and
BRAKE

black.

AF77-1046BLK Part No Colour Description to suit

AF77-1033 Polished Ford Mustang fabricated radiator tank
AF77-1033BLK Black Ford Mustang fabricated radiator tank

ALLOY WASHER BOTTLE WITH MOTOR

HARDLINE

Aeroflow’s fabricated washer tanks come with our billet 25.1mm (1”) cap and
hold 1.5L/51oz of fluid. These professionally constructed tanks come either FABRICATED RADIATOR
highly polished or in a black anodised finish.
Tanks come for universal applications or factory replacement for some
OVERFLOW TANK
vehicles. Aeroflow’s fabricated overflow tanks come with our
Billet 2” cap and hold 800ml/27oz of fluid. These
Part No Colour Size - Length x Width x Height
TANKS TANKS

professionally constructed tanks come either highly

polished or in a black anodised finish.Our tanks are
AF77-1000 Polished 80mm x 100mm x 210mm compatible with both recovery and non-recovery
4” x 3-1/8” x 8-1/4” cooling systems.
AF77-1000BLK Black 80mm x 100mm x 210mm *NOTE Comes with
4” x 3-1/8” x 8-1/4” 9.52mm (3/8”)
AF77-1005 Polished 210mm x 80mm x 100mm barb fittings.
8-1/4” x 3-1/8” x 4” Mounting bolt holes
ENGINE

AF77-1005BLK Black 210mm x 80mm x 100mm 80mm (3-1/16”)

8-1/4” x 3-1/8” x 4” centre to centre.

AF77-1006 Polished To Suit Holden (GM Australia) HD-HZ

210mm x 100mm x 80mm
8-1/4” x 3-1/8” x 4”
AF77-1006BLK Black To suit Holden (GM Australia) HD-HZ
SILICONE

210mm x 100mm x 80mm

8-1/4” x 3-1/8” x 4”
AF77-1046 Polished To suit Holden (GM Australia)
LC-UC WITH LOW PROFILE CAP
210mm x 100mm x 80mm Part No Colour Description
8-1/4” x 3-1/8” x 4”
AF77-1015 Polished Height 190mm (7 ½”)
AF77-1046BLK Black To suit Holden (GM Australia)
FABRICATION

LC-UC WITH LOW PROFILE CAP Diameter 90mm (3 1/2”)

AF77-1015BLK Black -4 ORB inlet and outlet
210mm x 100mm x 80mm
8-1/4” x 3-1/8” x 4”
AF77-1001 Replacement washer tank motor
Suits all Aeroflow washer tanks.
Motor has a 5mm barb outlet.

FABRICATED WRX AND STI

TOOLS

EXPANSION TANK
Aeroflow Performance has constructed this durable, TIG-welded aluminium
coolant expansion tank for perfect fitment in the 2002-2007 WRX and the
2004-2016 STI. Stock coolant expansion tanks are prone to failure after
years of constant temperature variations with our tanks featuring barbed
fittings for optimal durability and longevity. This expansion tank provides a
50% increase in capacity compared to the stock unit. It features a polished
APPAREL

silver or anodized black finish that will add some additional reliability and
engine bay styling. Barb fittings are removable.

Part No Colour Description to suit

AF77-2045 Polished WRX & STI Expansion tank
INSTRUCTIONS

AF77-2045 AF77-2045BLK AF77-2045BLK Black WRX & STI Expansion tank

146 aeroflowperformance.com
 FABRICATED TANKS

SQUARE FABRICATED RADIATOR

EXPANSION TANKS
Aeroflow’s fabricated aluminium with integral mounting bracket radiator
expansion tanks hold 1180ml (39oz) of fluid. Designed for several
applications where a small volume tank is required. Comes with a
recovery style radiator cap (16PSI/1.1bar) with a radiator billet cap
cover. 1 x -8 female ORB fitting on side of tank and 1 x female -8 ORB
fitting on bottom. ORB to AN or ORB to Barb fittings available separately
for custom plumbing applications.
Length 75mm x Width 115mm x Height 140mm
Length 2.95” x Width 4.52” x Height 5.51”
14mm (5-33/64”) mounting bracket bolt hole centre to centre BILLET RADIATOR OVER FLOW TANK
295ml (9.97oz) Billet Radiator Overflow Tank is constructed from 6061-T6
Part No Colour Description
aluminium and includes two Billet aluminium mounting brackets. Comes with
AF77-1026 Polished -8 ORB, radiator cap included -4AN fittings in & out, also includes 7.93mm (5/16”) Barb fittings and billet
AF77-1026BLK Black -8 ORB, radiator cap included mounting brackets. Can be used with -4AN push lock hose.
Height 325mm (13”) Diameter 50mm (2”)

Part No Colour Description

AF77-1021 Polished Billet radiator overflow tank
AF59-1121 Polished Replacement cap
AF77-1021BLK Black Billet radiator overflow tank
AF59-1121BLK Black Replacement cap

TANKS
UNIVERSAL OVERFLOW TANK
When your radiator coolant gets too hot, it will blow through your overflow
spout and all over your engine bay unless you have an overflow tank.
Aeroflow’s new overflow tanks are available in polished billet aluminium
or anodised black with 9.52MM (3/8”) barb fittings for a simple installation.
UNIVERSAL HEADER TANK
They will allow the coolant to expand and then recover as the temperature With 7.93mm (5/16”) male barbs and
drops. features a 32mm (1-17/64”) cap
Part No Colour Description Designed originally for racing engines, today’s compact production engines
can also benefit from the use of Aeroflow’s Radiator Header Tank. This tank
AF77-1029 Polished 171mm (6-3/4”) Height and efficiently removes trapped hot air pockets within the cooling system which
76mm (3”) Diameter can eventually cause overheating, especially during Aggressive driving. This
AF77-1029BLK Black tank allows the radiator to perform more efficiently, improving overall cooling
performance. Requires radiator hose adapters for installation.
See page 267 for radiator hose adapters

Part No Colour Description

AF77-1031 Polished
Height is 200mm (7-7/8”)
AF77-1031BLK Black Diameter is 60mm (2-3/8”)

AF59-1031 Natural Replacement blanking & pressure cap

natural finish.

aeroflowperformance.com 147
 FABRICATED TANKS
HOSE & TUBE

UNIVERSAL BREATHER
TANK 550ml (18.6oz)
with Dual -8 ORB Ports &
Breather
LIGHT WEIGHT

Breather tank comes with two -8 ORB

ports. These professionally constructed
tanks have a billet valve on the base
to ensure easy drainage. With a 1/8”
NPT thread on the base they can also
be plumbed back as an oil salvage
FABRICATED RADIATOR OVERFLOW system or remote drain. They come in
TANKS TO SUIT FORD BA/BF/FG SERIES either polished or black anodised finish
FITTINGS

and include billet

High Grade constructed Aluminium Tanks designed for direct replacement stainless steel breather filter. Also
for both inline 6Cyl and V8 models. 2 x -4 ORB & 1 x -12 ORB ports. feature two M8x1.25 mounting bungs.
Note: Ford FG models required an extra -4 ORB plug (AF813-04)

Part No Colour Description to suit Part No Colour Description

AF77-1030 Polished
AF77-1022 Polished Ford BA/BF/FG fabricated radiator tank Diameter 79mm (3 1/8”)
AF59-1022 Silver Replacement fittings kit
BRAKE

AF77-1030BLK Black Height 280mm (11”)

AF77-1022BLK Black Ford BA/BF/FG fabricated radiator tank
AF59-1022BLK Black Replacement fittings kit
AF64-5032 Polished Replacement Cap
AF64-5032BLK Black Replacement Cap
HARDLINE

UNIVERSAL BREATHER
TANK 550ml (18.6oz)
with Breather
Breather comes with a single -12 ORB
to suit all sizes lines. These
professionally constructed tanks have
TANKS TANKS

a billet valve on the base to ensure

easy drainage. With a 1/8” NPT thread
FABRICATED RADIATOR OVERFLOW TANKS on the base they can also be plumbed
back as an oil salvage system or
TO SUIT VX & VY COMMODORE & PONTIAC remote drain. They come in either
GTO polished or black anodised finish and
include billet stainless steel breather
LS Fabricated Radiator Overflow Tanks designed for VX and VY models
filter. Also feature two M8x1.25
ENGINE

fitted with LS engines, ORB fittings included.

mounting bungs.
Part No Colour Description to suit Part No Colour Description
AF77-1024 Polished VX & VY fabricated radiator tank AF77-1028 Polished
AF59-1024 Silver Replacement fittings kit Diameter 79mm (3 1/8”)
AF77-1024BLK Black VX & VY fabricated radiator tank AF77-1028BLK Black Height 280mm (11”)
AF59-1024BLK Black Replacement fittings kit
SILICONE

AF64-5032 Polished Replacement Cap

AF64-5032BLK Black Replacement Cap
NOTE: No provision for level sensor.

3L (101oz) UNIVERSAL
BREATHER TANK
FABRICATION

Aeroflow’s 3 litre (101oz) Universal Fabricated

Breather tanks are skillfully built. They come
either highly polished or in a black anodised
finish with an integral mounting bracket. The
tank is baffled and comes with 2 x female -12
ORB to suit all size lines. The top barb takes
an 34.92mm (1-3/8”) breather and is removable
leaving a female -16 ORB for custom plumbing.
TOOLS

They meet CAMS requirements and also

have a billet valve on the base to ensure
easy drainage. With a 1/8” NPT thread on the
base they can also be plumbed back as an oil
DRY SUMP / BREATHER TANK salvage or remote drain.
Remote breather tanks with internal baffling are excellent when venting your Length 120mm (4-3/4”)
dry sump tank to atmosphere. Width 120mm (4-3/4” )
Width 115mm (4-1/2”), Height 165mm (6-1/2”). Height 250mm (9-27/32”)
APPAREL

Part No Colour Description Part No Colour Description

AF77-2005 Polished 3L (101oz) Universal breather tank
AF77-1019 Polished 2 x -12 ORB ports and 1 x -6 ORB
AF77-2005BLK Black 3L (101oz) Universal breather tank
AF77-1019BLK Black drain with mounting accessories
AF926-22-16S Silver Replacement -16 to 1-3/8” (35mm) Barb
INSTRUCTIONS

AF59-1019 Stainless replacement mounting clamp

AF926-22-16BLK Black Replacement -16 to 1-3/8” (35mm) Barb
Full range of ORB fittings see page 70

148 aeroflowperformance.com
 FABRICATED TANKS

UNIVERSAL CATCH CAN 240ml (8.1oz)

UNIVERSAL BREATHER TANK 1.25L (42oz)
The Aeroflow performance
Our state of the art breather comes with 2x -12 ORB to suit all sizes lines.
billet universal air / oil
These professionally constructed tanks have a billet valve on the base to
separator has been designed
ensure easy drainage. With a 1/8 NPT thread on the base they can also be
to protect your modern diesel
plumbed back as an oil salvage system or remote drain. They come
& petrol engines by reducing
in either polished or black anodised finish.
the amount of oil vapour
entering the crankcase.
It features stainless steel
Part No Colour reusable and cleanable filter
AF77-1017 Polished mesh, a built in billet dipstick,
two -10ORB ports and one
AF77-1017BLK Black -4ORB which can be utilised
for a drain. Available in
polished or black.

AF59-1017 Replacement
Clamp
Part No Colour Description
Description AF64-4363 Polished Diameter 63.5mm (2-1/2”)
Depth 82mm (3-7/32”)
Diameter 79mm (3 1/8”) AF64-4363BLK Black Height 146mm (5-3/4”)
Height 415mm (16 3/8” )
Filter neck - 34.9mm (1 3/8”)
Mounting bracket holes
90mm (3-1/2”)” centres

TANKS
UNIVERSAL CATCH CANS 480ml (16.2oz)
For breathers
s
page 108 ee
The Aeroflow performance billet universal air / oil separator has been
designed to protect your modern diesel & petrol engines by reducing the
amount of oil vapour entering the crankcase. Each can features stainless
steel reusable and cleanable filter mesh, a built in billet dipstick, two -10ORB
ports and one -4ORB which can be utilised for a drain. This dual version is
essentially 2 single catch cans mounted to one common bracket. Available in
polished or black.

Part No Colour Description

AF64-4364 Polished Diameter 63.5mm (2-1/2”)
Depth 82mm (3-7/32”)
AF64-4364BLK Black Height 146mm (5-3/4”)

UNIVERSAL CATCH
CAN EXTENSION
1.1L (37oz) UNIVERSAL BREATHER TANK
Aeroflow’s 1.1L (37oz) Universal fabricated breather tanks are skillfully built.
They come in either highly polished or gloss black anodised finish with an
integral mounting bracket. The tank is baffled and features -10ORB to suit
all size lines when used with an appropriate adapter. The top barb takes an
34.92mm (1-3/8”) breather and is removable leaving a -16ORB for custom
plumbing. At the base we have a billet valve that can be remotely plumbed as The Aeroflow Performance universal catch can extension is an upgrade specifically
an oil salvage or remote drain. designed for customers who have the short universal catch can ( AF64-4363 or
Length 85mm (3-3/8”) x Width 85mm (3-3/8”) x Height 170mm (6-3/4”) AF64-4364 ). This extension is an O-ringed anodized aluminium section that screws
into the centre of your existing catch can. This will increase the volume of the catch
can to 950ML on the single catch can AF64-4363. This upgrade also includes a
Part No Colour Description longer O-ring sealed aluminium dipstick to make up for the increased depth with the
AF77-2015 Polished 1.1L (37oz) Universal breather tank extension.
AF77-2015BLK Black 1.1L (37oz) Universal breather tank
AF926-22-16S Silver Replacement -16 to 1-3/8” (35mm) Barb Part No Description Finish
AF926-22-16BLK Black Replacement -16 to 1-3/8” (35mm) Barb
AF64-4373 Universal catch can extension Silver
AF64-4373BLK Universal catch can extension Black

aeroflowperformance.com 149
 FABRICATED TANKS

POWER STEERING
FLOW CONTROL VALVE
TO SUIT SAGINAW

Designed to fit Saginaw power steering pumps. Replaces factory valve in light
steering applications to restrict flow to 7.6lpm (2gpm). Stops fluid foaming in
power steering tank. -6AN outlet.

Part No Description
AF64-2915 Power steering flow control valve

FABRICATED POWER STEERING TANK

Aeroflow’s fabricated P/S tanks come with our Billet 38.1mm (1-1/2”) I.D cap
and holds 660ml (22.5oz) of fluid. These professionally constructed tanks
are available polished or anodised black finishes. The internal construction
features a smart design baffle to prevent aeration. Fabricated from 5051
aluminium and incorporate -8AN and -10AN male fittings. Tank overall height
is 190mm (7-1/2”) and tank width is 80mm (3-1/8”). 2 x M8x1.25 female
FABRICATED POWER STEERING TANKS mounting bungs.

TO SUIT LS SERIES Part No Colour Description

Aeroflow Power Steering Reservoir tanks suits all LS engines and most V6 AF77-1032 Polished 660ml (22.5oz) power steering tank
engines from late VT to VE, Pontiac GTO, G8. -6 ORB & -10 ORB fittings AF77-1032BLK Black 660ml (22.5oz) power steering tank
included. Designed to fit factory position.
NOTE: Barb sizes 9.52mm (3/8”) and 15.8mm (5/8”)

Part No Colour Description

TANKS

AF77-1020 Polished Fabricated LS P/S tank

AF77-1020BLK Black Fabricated LS P/S tank
AF59-1020 Silver Replacement fitting kit
AF59-1020BLK Black Replacement fitting kit
AF59-1021 Polished Replacement cap
AF59-1021BLK Black Replacement cap

FABRICATED POWER STEERING

RESERVOIR
Aeroflow’s fabricated P/S tanks come with our
Billet 50.8mm (2”) cap and holds 650ml (22oz)
of fluid. These professionally constructed tanks
come either highly polished or in a black an-
odised finish. On the return side of the tanks
we have incorporated a
restrictor to prevent FABRICATED SQUARE POWER
aeration. Fluid level
must be above return STEERING RESERVOIR
line. Height 203mm Aeroflow’s square fabricated aluminium power steering tank with
(8”). Diameter integral mounting bracket holds 810ml (27oz) of fluid. It is baffled and comes
76mm (3”). with 38.1mm (1-1/2”) billet cap. Removable -10ORB and -6ORB to barb
-8 AN feed (bottom). fittings are included. ORB to AN fittings available separately for custom
-6 AN return (side). plumbing applications. Length 85mm (3-11/32”) x Width 85mm (3-11/32”) x
Mounting bolt holes Height 120mm (4-3/4”).
80mm (3-1/16”) NOTE: Barb sizes 9.52mm (3/8”) and 19mm (3/4”)
centre to centre.

Part No Colour Description

AF77-1025 Polished Square fabricated P/S tank
AF77-1025BLK Black Square fabricated P/S tank
AF59-1025 Silver Replacement fitting kit
AF59-1025BLK Black Replacement fitting kit
AF59-1021 Polished Replacement cap
Part No Colour Description AF59-1021BLK Black Replacement cap
AF77-1014 Polished Fabricated power steering tank
AF77-1014BLK Black Fabricated power steering tank

150 aeroflowperformance.com
 FABRICATED TANKS

FABRICATED POWER STEERING TANKS

TO SUIT FORD BA/BF SERIES FUEL COOLER TANK
Aeroflow’s fluid cool can is a smart and effective way to easily cool down any
High Grade Constructed Aluminium Tanks designed for direct replacement for
fluid system utilising up to -8AN (1/2”) lines. The tank features -8ORB female
V8’s only. 1 x -6 ORB and 1 x -8 ORB ports, fittings included.
ports with a large 76.2mm (3”) screw-on cap for ease of filling tank with ice.
NOTE: Barb sizes 9.52mm (3/8”) and 15.8mm (5/8”)
The tank is manufactured from 5051 Aluminium sheet metal and has mandrel
bent ½” tubing so there is no restrictions in flow. Tank can be used in many
Part No Colour Description to suit applications for example cooling your fuel system down for more power or
simply trying to keep oil temps down in extreme off road applications. Tank is
AF77-1023 Polished Ford BA/BF fabricated power steer tank
available in polished or black anodised and comes with mounting feet and a
AF59-1023 Silver Replacement fitting kit
-4AN drain port .
AF77-1023BLK Black Ford BA/BF fabricated power steer tank
Height 237mm (9-23/64”), Length & Width both 132mm (5-3/16”).
AF59-1023BLK Black Replacement fitting kit
AF59-1021 Polished Replacement cap
AF59-1021BLK Black Replacement cap Part No Colour Description
AF77-4054 Polished Fuel cooler tank
AF77-4054BLK Black Fuel cooler tank

TANKS
0 5 2 AllWoeylded
5 Folded &
CNC

BILLET POWER UNIVERSAL FABRICATED ALLOY TANKS

STEERING RESERVOIR Tanks can be used for many applications including surge tanks, breather
tanks and more. All female fittings are -8 ORB.
Billet P/S tank is constructed from 6061-T6 aluminium. The double O-ring
•Robotically TIG welded 2.5mm (3/32”) aluminium.
sealed breathable cap relieves negative and positive pressure. With Aeroflow’s
•All tanks are professionally polished.
pioneering internal tube you can forget about fluid and foaming turbulence. Our
•ORB ports for easy fitment and positive seal.
high-class bracket design clamps to the reservoir with an inner lock. Includes
162mm (6-3/8”) centres mounting bracket bolt hole centre to centre
male AN fittings on the bottom of the reservoir.
O.D. 73mm (2-7/8”). Height 222mm (8-3/4”). Holds 440ml (15 oz) of fluid.
Part No Colour Size - LxWxH Litres Oz
Part No Colour Description
AF77-1010 Polished 127mm (5”) x 127mm (5”) x 100mm (4”) 1.4 47
AF77-1027 Polished 440ml (15 oz) billet P/S tank AF77-1010BLK Black 127mm (5”) x 127mm (5”) x 100mm (4”) 1.4 47
AF77-1027BLK Black 440ml (15 oz) billet P/S tank AF77-1011 Polished 127mm (5”) x 127mm (5”) x 155mm (6”) 2.2 74
AF77-1011BLK Black 127mm (5”) x 127mm (5”) x 155mm (6”) 2.2 74
AF77-1012 Polished 127mm (5”) x 127mm (5”) x 210mm (8.25”) 3.1 105
AF77-1012BLK Black 127mm (5”) x 127mm (5”) x 210mm (8.25”) 3.1 105
AF77-1013 Polished 127mm (5”) x 127mm (5”) x 265mm (10.5”) 4 135
AF77-1013BLK Black 127mm (5”) x 127mm (5”) x 265mm (10.5”) 4 135

aeroflowperformance.com 151
 SURGE TANKS

Y-piece AF939-08-10
and dual pump bracket
AF64-2902 also
available separately.

check valves
included

As used in
single pump
applications
Fuel pumps & pump inlet
fittings NOT included

DUAL EFI PUMP SURGE TANK KITS

The 3.1L (105oz) surge tank has 6 x -8 ORB ports for multi configuration.
The kit contains surge tank, dual EFI fuel pump mounting bracket and billet
Y-Block (2 x -8, 1 x -10 ORB) •Check valves included •Robotically TIG welded
2.5L (67.6oz) SINGLE OUTLET
•All tanks are professionally polished. Also available black anodised inside SURGE TANKS
and out for use with alcohol and ethanol. •ORB ports for easy fitment and
positive seal. Dimensions: 114mm (4-1/2”) round & 273mm (10-3/4”) tall
162mm (6-3/8”) centres mounting bracket bolt hole centre to centre 3 x 9.52mm (3/8”), 1 x 12.7mm (1/2”) and 3 x 6AN, 1 x 8AN fittings included.
NOTE: Requires upgrade to wiring / fuses and installation of relay
Part No Finish Description
Part No Colour Size - LxWxH
AF49-1016 Polished 2.5 L (67.6oz) spun alloy surge tank
AF77-2044 Polished 127mm (5”)x127mm (5”)x210mm (8.25”) AF49-1016BLK Black 2.5 L (67.6oz) spun alloy surge tank
AF77-2044BLK Black 127mm (5”)x127mm (5”)x210mm (8.25”) AF59-1016S Silver Replacement fitting kit
AF59-1016BLK Black Replacement fitting kit

Removable ORB AN and Barb fittings included.

TANKS

Fuel pumps
NOT included

AF939-08-10BLK AF64-2902BLK

AF907-08BLK
As used in
AF64-2901BLK dual pump
applications
EFI PUMP ACCESSORIES
Aeroflow have designed a 6061-T6 Billet single and dual pump bracket that
can be used with a wide range of fuel pump’s, not only Aeroflow’s famous
1014 EFI pump. Can also double up as a 2-5/8” gauge holder when silencer
rubbers are removed.

Part No Colour Description

AF64-2901 Blue Single fuel pump bracket
AF64-2901BLK Black Single fuel pump bracket
AF64-2901R Red Single fuel pump bracket
AF64-2901S Silver Single fuel pump bracket
AF64-2901P
AF64-2902
Polished
Blue
Single fuel pump bracket
Dual fuel pump bracket 2.5L (67.6oz) DUAL OUTLET
AF64-2902BLK
AF64-2902R
Black
Red
Dual fuel pump bracket
Dual fuel pump bracket
SURGE TANKS
AF64-2902S Silver Dual fuel pump bracket Dimensions: 114mm (4-1/2”) round & 273mm(10-3/4”) tall
AF64-2902P Polished Dual fuel pump bracket DUAL BOTTOM OUTLET for twin pump setups all ports are female -8 ORB
AF939-08-10 Blue Billet Y piece
AF939-08-10BLK Black Billet Y piece
AF939-08-10S Silver Billet Y piece
Part No Finish Description
AF939-08-10P Polished Billet Y piece AF49-1024 Polished 2.5 L (67.6oz) surge tank DUAL OUTLET
Tank to pump fitting. AF49-1024BLK Black 2.5 L (67.6oz) surge tank DUAL OUTLET
AF907-08 Blue -8 ORB to -8 female
AF907-08BLK Black -8 ORB to -8 female
AF907-08S Silver -8 ORB to -8 female

152 aeroflowperformance.com
 SURGE TANKS

DUAL EFI PUMP UNDER-CAR SURGE TANK

The 4.75L (1.25 Gal) surge tank has 6 x -8 ORB ports for multi configuration. DUAL EFI PUMP UNDER CAR
The tank comes with dual EFI mounting bracket and 2 x AF907-08 adapters.
Also available black anodised inside and out for use with alcohol and ethanol. COMPACT SURGE TANK
•ORB ports for easy fitment and positive seal. Same specifications as our Dual EFI pump compact surge tank but with the
NOTE: Requires upgrade to wiring / fuses and installation of relay ORB inlet and outlet ports at the highest position of the tank. This will allow
the surge tank to be positioned underneath the vehicle.
Part No Colour Size - LxWxH Litres
Part No Colour Description
AF77-1044 Polished 390mm(15”) x 150mm(5.9”) x 162mm(6.3”) 4.75L
AF77-1044BLK Black 390mm(15”) x 150mm(5.9”) x 162mm(6.3”) 4.75L AF77-4244 Polished Dual EFI pump under car surge tank
AF77-4244BLK Black Dual EFI pump under car surge tank
AF59-3144 Replacement 60mm o-ring

Sample ONLY.
No pumps
regulators or
fittings included.

Sample ONLY.

TANKS
No pumps
regulators or
fittings included.

SINGLE EFI PUMP COMPACT SURGE TANK

DUAL EFI PUMP COMPACT SURGE TANK These compact surge tanks are designed to work with our AF49-1014 pump,
or 60mm (2-3/8”) pump as well as the Bosch 044 fuel pump. These smart
These compact surge tanks are designed to work with our AF49-1014 pumps, little tanks are designed to have the fuel pump submerged in fuel for a quieter
or 60mm (2-3/8”) pumps as well as the Bosch 044 fuel pumps. These smart operation and longer life of the fuel pump. These tanks feature -8ORB ports
little tanks are designed to have the fuel pumps submerged in fuel for a for a positive seal allowing many options to plumb the fuel system. The tank
quieter operation and longer life of the fuel pump. These tanks feature -8ORB can be mounted in the engine bay to reduce the work and cost to route the
ports for a positive seal allowing many options to plumb the fuel system. Fits fuel system from the rear of the vehicle. We offer the tank in either polished
AF939-08-10 Y-piece to merge pumps to a female -10ORB port. The tank can or shiny black anodised. The black anodised finish is recommended for use
be mounted in the engine bay to reduce the work and cost to route the fuel with corrosive fuels such as Ethanol and Methanol.
system from the rear of the vehicle. We offer the tank in either polished or Length 130mm (5”) x Width 130mm (5”) x Height 160mm (6.3”)
shiny black anodised. The black anodised finish is recommended for use with 2.3L (77.7oz) capacity measured with AF49-1014 fuel pump fitted.
corrosive fuels such as Ethanol and Methanol. Includes block-off plate 162mm (6-3/8”) centres mounting bracket bolt hole centre to centre
for use as single pump tank with option to upgrade to dual pumps. NOTE: Requires upgrade to wiring / fuses and installation of relay
Length 180mm (7”) x Width 115mm (4.5”) x Height 180mm (7”)
3.8L (1Gal) capacity measured with 2 x AF49-1014 fuel pumps fitted.
217mm (8-35/64”) centres mounting bracket bolt hole centre to centre Part No Colour Description
NOTE: Requires upgrade to wiring / fuses and installation of relay AF77-3144 Polished Single pump surge tank
AF77-3144BLK Black Single pump surge tank
Part No Colour Description AF59-3144 Replacement 60mm o-ring
AF77-3244 Polished Dual EFI pump surge tank
AF77-3244BLK Black Dual EFI pump surge tank
AF59-3144 Replacement 60mm o-ring

aeroflowperformance.com 153
 SURGE TANKS / FUEL CELLS

ALUMINIUM FUEL CELLS

• HIGH GRADE ALUMINIUM. 3.0mm (1/8”) thickness
• ROBOT WELDED. The fuel cell has been welded solely by a high
level machine robot the quality of which can be seen by the clean corner
welds.
• FUEL PICK-UP POINT. As can be seen in the photo, The fuel OUT
fittings are in a cavity at the base of the cell, which helps prevent fuel
starvation at low fuel levels even under high G-force levels. Sump
measures 152.4mm (6”) long 152.4mm (6”) wide & 50.8mm (2”) depth
• FUEL INLET / OUTLET FITTINGS. The fuel cell incorporates all
Pump sold
seperately -12 ORB female threads for use in all applications. 2 x pickups and 2 x
returns or 1 x return and 1 x rollover.
• FLUSH CAP. Designed for fast cap removal with a flip up and twist
SINGLE EFI PUMP COMPACT SURGE TANK action CNC billet polished alloy cap with a 1 way air valve in the cap.
Aeroflow Performance single compact surge tanks are ideal for fuel systems • FUEL LEVEL SENDER UNIT. The resistance at empty is 0 ohms and
that use the very popular 40mm diameter fuel pumps in todays market. the resistance at full is 90 ohms.
These smart little tanks are designed to have the fuel pump submerged in • MOUNTING BRACKETS. The cell can be secured with the 4 sturdy
fuel for quieter operation and longer life of the fuel pump. Utilizing a billet mounting brackets. (Rubber mounts recommended for high flex chassis
single 40mm pump hanger with a -6an male fitting for the feed, 3 x -8ORB
applications)
female ports and two electrical bulkheads. Designed to work with Aeroflow
Performance AF49-1041 , AF49-1042 , AF49-1057 high flow fuel pumps • BLACK ANODISED AVAILABLE. Black fuel cells are anodised inside
or any other 40mm diameter fuel pumps. The tank can be mounted in the and out for use with Ethanol (E85) and Methanol fuels.
engine bay to reduce the work and cost to route from the rear of a vehicle.
Both tanks are available in either polished or black anodised finish, the black
anodised finish is what we recommend for use with corrosive fuels such as
Ethanol and Methanol.
Length 130mm (5”) x Width 130mm (5”) x Height 160mm (6.3”)
2.5L (84.5oz) capacity.
164mm (6-29/64”) centres mounting bracket bolt hole centre to centre
NOTE: Requires upgrade to wiring / fuses and installation of relay

Part No Colour Description

AF77-4055 Polished Single pump surge tank
AF77-4055BLK Black Single pump surge tank
AF59-4055 Replacement viton gasket
TANKS

Note: Black anodised

cells can be used
with Ethanol or
Methanol Fuels
11.35L (3Gal) FUEL CELL
11.35 L (3 US Gallons) with Cavity/Sump. Internally baffled
Length 205mm (8-1/16” ) x Width 205mm (8-1/16”) x Height 405mm (15-15/16”)

Part No Colour Description

AF85-2030A Aluminium 11.35L (3Gal) Alloy fuel tank
AF85-2030ABLK Black 11.35L (3Gal) Alloy fuel tank

Has provision for 50.8mm (2”) filter bracket.

Filter & bracket NOT INCLUDED
TRIPLE EFI PUMP COMPACT SURGE TANK
These compact surge tanks are designed to work with our AF49-1041 &
AF49-1042, AF49-1057 pumps, or any 40mm (1-37/64) diameter pump.
These smart tanks are designed to have the fuel pumps submerged in fuel
for a quieter operation and longer life of the fuel pump. These tanks features
-10ORB feed & -8ORB return/overflow ports for a positive seal allowing many
options to plumb the fuel system and are 7L (1.85 Gal) in capacity. We offer
the tank in either polished or black anodised. The black anodised finish is
recommended for use with corrosive fuels such as Ethanol and Methanol.
Length 185mm (7-1/4”) x Width 185mm (7-1/4”) x Height 260mm (10-1/4”)
7L (1.85 Gal) capacity.
154mm (6-1/16”) centres mounting bracket bolt hole centre to centre 19L (5Gal) FUEL CELL
NOTE: Requires upgrade to wiring / fuses and installation of relay
Electrical terminals are M6x1 19 L (5 US Gallons) with Cavity/Sump. Internally baffled
Length 260mm (10-1/4” ) x Width 300mm (11-13/16”) x Height 260mm (10-1/4”)

Part No Colour Description

Part No Colour Description
AF77-4053 Polished Triple pump surge tank AF85-2050A Aluminium 19L (5Gal) Alloy fuel tank
AF77-4053BLK Black Triple pump surge tank AF85-2050ABLK Black 19L (5Gal) Alloy fuel tank
AF59-2070 Replacement viton gasket Sender not included

154 aeroflowperformance.com
 FUEL CELLS

Width
Length Sender not included

Height

38L (10Gal) FUEL CELL

38 L (10 US Gallons) with Cavity/Sump. Internally baffled
Length 380mm (14-15/16” ) x Width 410mm (16-1/8”) x Height 260mm (10-1/4”)

Part No Colour Description

AF85-2100A Aluminium 38L (10Gal) Alloy fuel tank
AF85-2100ABLK Black 38L (10Gal) Alloy fuel tank

5052 Alloy

TANKS
CNC Folded & Welded

57L (15Gal) FUEL CELL with Sump Electrical terminal bulkheads

and fuel pump wiring included.
57L (15 US Gallons) with Cavity/Sump. Internally baffled with sump.
Length 460mm (18-1/8” ) x Width 510mm (20-1/16”) x Height 260mm (10-1/4”)
0-90 ohm Fuel Level Sender Included. 57L (15Gal) FUEL CELL, FLAT BOTTOM
Part No Colour Description with 3 x 60mm TRIPLE PUMP HANGER
Aeroflow now offer a 57L (15 US Gallons) fuel tank already fitted with our
AF85-2150AS Aluminium 57L (15Gal) Alloy fuel tank triple pump hanger, perfect for high fuel flow requirements. The hanger
AF85-2150ASBLK Black 57L (15Gal) Alloy fuel tank works with 1, 2 or 3 60mm (2-3/8”) diameter fuel pumps and is internally
baffled to eliminate surge. Use pump AF49-1013 or AF49-1014
Length 460mm (18-1/8” ) x Width 510mm (20-1/16”) x Height 260mm (10-1/4”)
0-90 ohm Fuel Level Sender Included. More triple hanger specs on page 157.

Part No Colour Description

AF85-4050AS Aluminium 57L (15Gal) Alloy fuel tank
AF85-4050ASBLK Black 57L (15Gal) Alloy fuel tank

57L (15Gal) FUEL CELL, FLAT BOTTOM

with 3 x 40mm TRIPLE PUMP HANGER
Aeroflow now offer the 57L ( 15 US gallons ) fuel tank already fitted with our
triple pump which is perfect for high horsepower and high fuel applications. The
hanger works with 1,2 or 3 40mm (1-37/64”) fuel pumps such as our AF49-1041,
AF49-1042 or AF49-1057 and is internally baffled to eliminate fuel surge. PTFE
57L (15Gal) FUEL CELL with Flat Bottom in tank hose is included. Length 460mm (18-1/8” ) x Width 510mm (20-1/16”) x
Height 260mm (10-1/4”). 0-90 ohm Fuel Level Sender Included.
57L (15 US Gallons) with flat bottom. Internally baffled . More triple hanger specs on page 157.
Length 460mm (18-1/8” ) x Width 510mm (20-1/16”) x Height 260mm (10-1/4”)
0-90 ohm Fuel Level Sender Included.
Part No Colour Description
Part No Colour Description
AF85-4051AS Aluminium 57L (15Gal) Alloy fuel tank
AF85-2151AS Aluminium 57L (15Gal) Alloy fuel tank AF85-4051ASBLK Black 57L (15Gal) Alloy fuel tank
AF85-2151ASBLK Black 57L (15Gal) Alloy fuel tank
aeroflowperformance.com 155
 SURGE TANKS / FUEL CELLS

76L (20Gal) FUEL CELL with Sump Electrical terminal bulkheads

76L (20 US Gallons) with Cavity/Sump. Internally baffled. and fuel pump wiring included.
Length 510mm (20-1/16”) x Width 620mm (24-3/8”) x Height 260mm (10-1/4”)
0-90 ohm Fuel Level Sender Included.

Part No Colour Description

AF85-2200AS Aluminium 76L (20Gal) Alloy fuel tank
AF85-2200ASBLK Black 76L (20Gal) Alloy fuel tank
TANKS

76L (20Gal) FUEL CELL, FLAT BOTTOM

with 3 x 60mm TRIPLE PUMP HANGER
Aeroflow offer the 76L ( 20 US gallons ) fuel tank already fitted with our triple
pump which is perfect for high horsepower and high fuel applications. The
hanger works with 1,2 or 3 60mm (2-3/8”) fuel pumps such as our AF49-1013 or
AF49-1014 and is internally baffled to eliminate fuel surge. Flat bottom tank.
Length 620mm (24-3/8”) x Width 510mm (20-1/16”) x Height 260mm (10-1/4”)
0-90 ohm Fuel Level Sender Included. More triple hanger specs on page 157.

Part No Colour Description

AF85-4070AS Aluminium 76L (20Gal) Alloy fuel tank
AF85-4070ASBLK Black 76L (20Gal) Alloy fuel tank

76L (20Gal) FUEL CELL, FLAT BOTTOM

95L (25Gal) FUEL CELL with Sump
95L (25 US Gallons) with Cavity/Sump. Internally baffled .
with 3 x 40mm TRIPLE PUMP HANGER
Length 640mm (25-1/4”) x Width 620mm (24-3/8”) x Height 260mm (10-1/4”) Aeroflow now offer the 76L ( 20 US gallons ) fuel tank already fitted with our
0-90 ohm Fuel Level Sender Included. triple pump which is perfect for high horsepower and high fuel applications. The
hanger works with 1,2 or 3 40mm (1-37/64”) fuel pumps such as our AF49-1041,
Part No Colour Description AF49-1042 or AF49-1057 and is internally baffled to eliminate fuel surge. PTFE
in tank hose is included. Flat bottom tank.
AF85-2250AS Aluminium 95L (25Gal) Alloy fuel tank Length 620mm (24-3/8”) x Width 510mm (20-1/16”) x Height 260mm (10-1/4”)
AF85-2250ASBLK Black 95L (25Gal) Alloy fuel tank 0-90 ohm Fuel Level Sender Included. More triple hanger specs on page 157.

Part No Colour Description

AF85-4071AS Aluminium 76L (20Gal) Alloy fuel tank
AF85-4071ASBLK Black 76L (20Gal) Alloy fuel tank
156 aeroflowperformance.com
 FUEL CELLS ACCESSORIES

FUEL CELL 3 x 40mm TRIPLE PUMP

HANGER CONVERSION KIT
Your Aeroflow triple pump (3x60mm) fuel cell can now be converted to accept the
popular smaller diameter 40mm ( 1-37/64”) fuel pumps such as our
AF49-1041, AF49-1042 or AF49-1057 .This conversion kit includes the pump
bracket holder, a new stalk and new in-tank PTFE fuel hose. To suit our
AF85-4050AS, AF85-4050ASBLK, AF85-4070AS, AF85-4070ASBLK fuel cells only.
AF59-4050SS
Part No Description
AF59-4053BLK Retrofit converstion kit for 3 x 40mm pump

TANKS
Fuel pumps NOT included

BILLET TRIPLE 60mm PUMP HANGER

Holds up to 3 x 60mm (2-3/8”) EFI pumps
Deliver more fuel to your high powered car with Aeroflow’s triple pump hanger
kit! Our triple pump hanger is CNC machined from billet 6061-T6 aluminium
with a black anodized option for maximum durability and corrosion protection
against E85/Methanol.
The 3 piece head incorporates an aluminium weld on for custom tanks. The
Buna N O-rings provide a positive seal for the internal fuel log which has a
BILLET SINGLE 40mm PUMP HANGER -12 feed for large flow applications with a -8 return. With 3 x -8 internal feeds
along with the check valves and male to female joiners which remove the
Holds 1 x 40mm (1-37/64”) EFI pumps need for in tank hose or clamps.
Now you can upgrade your fuel delivery system when converting over We’ve designed the CNC Billet hanger to mount 1, 2 or 3 60mm (2-23/64”)
from carby to efi with this billet single fuel pump hanger from Aeroflow Intake pumps 60mm (2-3/8”) diameter.
Performance. The billet hanger has a built in fuel cap and has the ability to • Suits a 205mm (8”) diameter cutout.
mount one AF49-1041, AF49-1042, AF49-1057 or any 40mm ( 1-37/64” ) • For use with 250mm (10”) deep tanks.
diameter fuel pumps. CNC machined from billet 6061-T6 aluminium with • Single, twin or triple E85 compatible Aeroflow pumps AF49-1013 or Bosch
black anodized option for maximum durability and corrosion protection E85/ in tank pumps.
methanol. • Built-in fuel manifold chamber for better pressure equalization and no
• Includes PTFE in tank hose with 2 clamps. external couplers.
• Suits a 120mm (4-23/32) bolt circle and 102mm (4”) diameter cutout. • -12ORB female feed for maximum flow
• For use with 250mm (10”) deep tanks. • -8ORB female Return
• Fits E85 compatible Aeroflow pump AF49-1041 or 40mm (1-37/64”) • Pump wiring kit
diameter in tank pumps. NOTE: fuel pumps not included.
• Built-in fuel manifold chamber for better pressure equalization and no
external couplers.
• -6AN male feed fitting included.
• -16 port / filler cap.
Part No Finish Suits pump
NOTE: fuel pumps and wiring not included. AF64-4050 Polished AF49-1013
NOTE: Requires upgrade to wiring / fuses and installation of relay AF64-4050BLK Black AF49-1013
these items are NOT INCLUDED.
AF59-4050SS Stainless Optional Stainless steel weld in ring
Part No Colour Suits pump for use with steel or S/S tanks
AF64-4054 Polished AF49-1041, AF49-1042, AF49-1057
AF59-4050D Aluminium Optional Aluminium steel weld in ring
AF64-4054BLK Black AF49-1041, AF49-1042, AF49-1057 for use with Aluminium tanks
AF59-2050 Replacement cork gasket

aeroflowperformance.com 157
 FUEL CELLS ACCESSORIES

HOLDEN VE / VF FUEL PUMP MODULE

TANKS

Aeroflow Performance is proud to release this direct fit bolt in in-tank fuel
module for the Holden Commodore VE-VF. With these modern Commodores
being tuned to amazing power levels thanks to E85 this module is capable
of holding up to 3 x 40mm diameter fuel pumps at a time. This will perfectly
support power levels from standard all the way to 1800hp while still retaining
the factory fuel tank with all standard seals, lock rings and internal crossover
lines. It also allows you to reuse the OEM fuel level sender for complete
compatibility with factory electronics and features a hermetic wire pass through
for absolutely no chance for fuel smells/leaks into the cabin while still upgrading
to the necessary larger wires.
•Suits Holden Commodore VE-VF models
•Accepts single, twin or triple 40mm (1-37/64”) fuel pumps such as AF49-1041,
AF49-1042 , AF49-1057 sold separately.
BILLET TRIPLE 40mm PUMP HANGER •E85 compatible.
•-8ORB feed and return fittings.
Holds up to 3 x 40mm (1-37/64”) EFI pumps • After market fuel regulator, custom fuel pump wiring and fuel lines required for
Now you can upgrade your fuel delivery system without having to replace or installation these parts are NOT INCLUDED.
customise your fuel cell. Aeroflow has developed a triple pump hanger that
replaces the standard fuel cell filler cap and is a straight bolt in item. The billet Part No Description
hanger has a built in fuel cap and has the ability to mount one, two or three
AF49-1041 or AF49-1042, AF49-1057 EFI fuel pumps or any 40mm (1- AF64-4055 Holden VE -VF Triple pump hanger
37/64”) diameter fuel pumps. CNC machined from billet 6061-T6 aluminium
with a black anodized option for maximum durability and corrosion protection
against E85/Methanol.
• Suits a 120mm (4-23/32) bolt circle and 102mm (4”) diameter cutout.
• For use with 250mm (10”) deep tanks.
• Single, twin or triple E85 compatible Aeroflow pumps AF49-1041 or
40mm (1-37/64”) diameter in tank pumps.
• Built-in fuel manifold chamber for better pressure equalization and no
external couplers.
• -10ORB feed for maximum flow.
• -16ORB port / filler cap.
NOTE: fuel pumps, wiring and intank clamps not included.
NOTE: Requires upgrade to wiring / fuses and installation of relay
these items are NOT INCLUDED.

Part No Colour Suits pump

AF64-4053 Polished AF49-1041, AF49-1042, AF49-1057
AF64-4053BLK Black AF49-1041, AF49-1042, AF49-1057
AF59-2050 Replacement cork gasket

158 aeroflowperformance.com
 FUEL CELLS ACCESSORIES

75mm
2-61/64”
AF85-2000BLK

225mm
8-55/64” 180mm
7-3/32”
AF85-2000

AF85-2005BLK
UNIVERSAL FUEL TANK SUMP
BILLET FUEL CAPS
These universal steel sumps are designed to be installed onto the lowest
Aeroflow fuel Caps are 120mm (4-23/32) bolt circle and 76.2mm (4”) diameter cutout.
portion at the rear of your steel factory fuel tank to create a sump that has
RCI fuel Caps are 134.5mm (5-19/64) bolt circle.
constant fuel pressure to stop fuel surge and allows you to plumb up to -12
lines for large fuel systems.
Part No Description
Part No Description AF85-2000 Billet fuel cap assembly suits all Aeroflow Aluminium
AF85-1000 Steel sump extension with 2 x -12 ORB female ports fuel cells. Comes with one way valve, bolts and gasket.
AF85-2000BLK Black billet fuel cap assembly suits all Aeroflow
Aluminium fuel cells. Comes with one way valve,
bolts and gasket.
AF59-2030 Replacement O-Ring for all Aeroflow fuel cell caps.
AF59-2050 Replacement cork gasket suits Aeroflow necks & cells
AF59-2070 Replacement viton rubber gasket suits Aeroflow necks & cells.
AF85-2005 Polished billet fuel cap assembly suits all RCI fuel cells.
AF85-2005BLK Black billet fuel cap assembly suits all RCI fuel cells.

REMOTE FUEL CELL FILLER

TANKS
45o 63.5mm (2-1/2”) neck remote filler suits Aeroflow fuel cell
AF85-3010
Suits a 120mm (4-23/32) bolt circle and 76.2mm (4”) diameter cutout.
AF85-3010BLK
Screw ring, washers, gaskets and nuts included. Total height 120mm (4-47/64”)
FUEL CELL SPILL TRAY
Part No Description Suits all Aeroflow fuel cells except AF85-4050AS where it requires a
AF85-3000 Polished custom spacer to clear the triple pump hanger.
AF85-3000BLK Black Suits a 120mm (4-23/32) bolt circle and 76.2mm (4”) diameter cutout.
AF59-2002 Fuel cell screw ring complete with nuts, washers and gaskets.
AF59-2050 Replacement cork gasket suits Aeroflow necks & cells
AF59-3050 Replacement polished cap
Part No Description
AF59-3050BLK Replacement black cap AF85-3010 Polished finish
AF85-3010BLK Black anodised finish
AF59-2050 Replacement cork gasket suits Aeroflow necks & cells

AF85-2010

FUEL CELL SCREW ON CAP ASSEMBLY AF85-1500

Billet 63.5mm (2-1/2”) fuel cap assembly suits all Aeroflow Aluminium fuel cells.
Suits a 120mm (4-23/32) bolt circle and 76.2mm (4”) diameter cutout.
Colour
Screw ring, washers, gaskets and nuts included. Total height 36mm (1-9/64”) FUEL SENDER UNIT
Tube style. Complete with bolts and gasket.
Part No Description Suit 260mm (10-1/4”) deep fuel cells.
AF85-2002 Polished
AF85-2002BLK Black Part No Description
AF59-2002 Fuel cell screw ring complete with nuts, washers and gaskets
AF85-2010 0-90 ohm sender unit.
Note: Replacement cap AF59-460-40, different colours available.See page 390
AF85-2011 240-33 ohm sender unit.
AF85-2012 70-10 ohm sender unit.
AF85-1500 Aluminium weld on for all Aeroflow fuel sender units
AF59-2011 Replacement fuel level sender cork gasket

aeroflowperformance.com 159
 FUEL CELL ACCESSORIES

FUEL CELL SAFETY FOAM

Suits all Aeroflow fuel cells. (BioFuel Compatible)

Part No Description
AF85-3005 457mm (18”)L x 101.6mm (4”) W x 88.9mm (3-1/2”) H
Note. Due to the use of unknown additives in some fuels, we are unable to STEPPED ONE WAY CHECK VALVES
guarantee our fuel cell safety foam compatibility with all fuels unless other
Aeroflow’s new One Way Check Valves. These check valves can be
wise stated. INSPECT REGULARLY & REPLACE FOAM EVERY SEASON. dismantled and the spring inside removed to double up to become a
Rollover Valve. Being stepped from -12 to -8AN makes it perfect to run a
fuel return line when used with Aeroflow fuel cells.

AN in AN out Blue Black Silver

-12 -8 AF612-12-08 AF612-12-08BLK AF612-12-08S
Note: Spring can be easily removed to act as a inline roll over vent.
Supplied with Buna N O-ring and EPR O-ring for use with Nitro blended
fuels

FUEL CELL BULKHEAD FITTINGS

Suits 14.2mm (9/16”) bulkhead hole. Up to 6.35mm (1/4”) material.
BOLT IN ROLL OVER
Total length is 55mm 2-11/64” VALVE / VENT
AN to Barb Blue Black Silver
AN Part No
-6 to 7.93mm (5/16”) AF927-06-05 AF927-06-05BLK AF927-06-05S
-6 AF611-06
-6 to 9.52mm (3/8”) AF927-06-06 AF927-06-06BLK AF927-06-06S
-8 AF611-08
-10 AF611-10
TANKS

-12 AF611-12
-16 AF611-16

FUEL CELL BULKHEAD FITTINGS

AN Blue Black Silver
-6 AF921-06 AF921-06BLK AF921-06S
ROLL OVER VALVE / VENT
-8 AF921-08 AF921-08BLK AF921-08S Female ORB to male AN
-10 AF921-10 AF921-10BLK AF921-10S
-12 AF921-12 AF921-12BLK AF921-12S
AN Blue Black Silver
-16 AF921-16 AF921-16BLK AF921-16S
-6 AF614-06 AF614-06BLK AF614-06S
-8 AF614-08 AF614-08BLK AF614-08S

ROLL OVER
VALVE / VENT
Aeroflow’s Universal roll over valve can be screwed directly into an Aeroflow
Fuel cell that has a -12 female thread. The top of the valve has a -8 ORB female
thread and a stainless steel ball. It can be used with the AF996-12D, AF996-12S
and AF996-12SS weld on or an AF924-12 Bulk Head nut with a choice of any -08
ORB to suit any plumbing solution. When the fitting is screwed into the top of the
roll over valve it locks the ball.

ORB-ORB Blue Black Silver

-12 to -8 AF613-12 AF613-12BLK AF613-12S

160 aeroflowperformance.com
 HARDLINE & FITTINGS

ALUMINIUM & STAINLESS STEEL HARD LINE

Aeroflow offer both aluminium and steel hard line in many different sizes. All sizes are
also available in different finishes including black anodised finish for use in high corrosion
resistance applications such as E85 and alcohol fuels.
Stainless steel manufactured to ASTM A269 standards.
Aluminium tube manufactured to ASTM-A254 standards.

O.D. Length Wall Raw Alloy Finish Black Anodised 304 Stainless Steel Wall
4.76mm 3/16” 7.6M / 25ft .9mm >1/32” AF66-4316 (Zinc Coated Steel) AF66-3316 .71mm 1/32”
6.35mm 1/4” 7.6M / 25ft 1.0mm <3/64” AF66-2998 AF66-2998BLK AF66-2998SS .5mm 1/64”
7.9mm 5/16” 7.6M / 25ft 1.0mm <3/64” AF66-2999 AF66-2999BLK AF66-2999SS .71mm 1/32”
9.5mm 3/8” 7.6M / 25ft 1.0mm <3/64” AF66-3000 AF66-3000BLK AF66-3000SS .71mm 1/32”
12.7mm 1/2” 7.6M / 25ft 1.2mm 3/64” AF66-3001 AF66-3001BLK AF66-3001SS .8mm >1/32”
15.8mm 5/8” 7.6M / 25ft 1.2mm 3/64” AF66-3002 AF66-3002BLK

HARDLINE & HARDLINE FITTINGS

19.05mm 3/4” 7.6M / 25ft 1.5mm 1/16” AF66-3003 AF66-3003BLK

Tube Fittings Hard Line Adapters Quick Conversion Chart

4.76mm 3/16”
Aeroflow offers the best solution for transition from hard tube line to AN thread fast and simple. Our
6.35mm 1/4” -4 AN
tube fittings come in all different sizes to meet most applications. Our unique design provides quick
7.9mm 5/16” -5 AN
assembly and easy alignment on the final application. Aeroflow’s corrosion resistant, colour consistent,
9.5mm 3/8” -6 AN
hard anodised and hand polished finish adds the final touch of quality and protection you have come to
12.7mm 1/2” -8 AN
expect from Aeroflow. 100PSI operating pressure, 300PSI burst pressure.
15.8mm 5/8” -10 AN
19.05mm 3/4” -12 AN

TUBE to FEMALE AN ADAPTER TUBE to MALE AN ADAPTER

Tube to AN Blue/Red Black Silver
Tube to AN Blue/Red Black Silver
1/4” to -4 AF109-04 AF109-04BLK AF109-04S
5/16” to -6 AF109-05 AF109-05BLK AF109-05S 1/4” to -4 AF108-04 AF108-04BLK AF108-04S
3/8” to -6 AF109-06 AF109-06BLK AF109-06S 5/16” to -6 AF108-05 AF108-05BLK AF108-05S
1/2” to -8 AF109-08 AF109-08BLK AF109-08S 3/8” to -6 AF108-06 AF108-06BLK AF108-06S
5/8” to -10 AF109-10 AF109-10BLK AF109-10S 1/2” to -8 AF108-08 AF108-08BLK AF108-08S
3/4” to -12 AF109-12 AF109-12BLK AF109-12S 5/8” to -10 AF108-10 AF108-10BLK AF108-10S
3/4” to -12 AF108-12 AF108-12BLK AF108-12S

aeroflowperformance.com 161
 HARDLINE FITTINGS

45o TUBE to FEMALE AN ADAPTER 45o TUBE to MALE AN ADAPTER

Tube to AN Blue/Red Black Silver Tube to AN Blue/Red Black Silver
1/4” to -4 AF129-04 AF129-04BLK AF129-04S 1/4” to -4 AF128-04 AF128-04BLK AF128-04S
5/16” to -6 AF129-05 AF129-05BLK AF129-05S 5/16” to -6 AF128-05 AF128-05BLK AF128-05S
3/8” to -6 AF129-06 AF129-06BLK AF129-06S 3/8” to -6 AF128-06 AF128-06BLK AF128-06S
1/2” to -8 AF129-08 AF129-08BLK AF129-08S 1/2” to -8 AF128-08 AF128-08BLK AF128-08S
5/8” to -10 AF129-10 AF129-10BLK AF129-10S 5/8” to -10 AF128-10 AF128-10BLK AF128-10S
3/4” to -12 AF129-12 AF129-12BLK AF129-12S 3/4” to -12 AF128-12 AF128-12BLK AF128-12S
HARDLINE & HARDLINE FITTINGS

90o TUBE to FEMALE AN ADAPTER 90o TUBE to MALE AN ADAPTER

Tube to AN Blue/Red Black Silver Tube to AN Blue/Red Black Silver
1/4” to -4 AF139-04 AF139-04BLK AF139-04S 1/4” to -4 AF137-04 AF137-04BLK AF137-04S
5/16” to -6 AF139-05 AF139-05BLK AF139-05S 5/16” to -6 AF137-05 AF137-05BLK AF137-05S
3/8” to -6 AF139-06 AF139-06BLK AF139-06S 3/8” to -6 AF137-06 AF137-06BLK AF137-06S
1/2” to -8 AF139-08 AF139-08BLK AF139-08S 1/2” to -8 AF137-08 AF137-08BLK AF137-08S
5/8” to -10 AF139-10 AF139-10BLK AF139-10S 5/8” to -10 AF137-10 AF137-10BLK AF137-10S
3/4” to -12 AF139-12 AF139-12BLK AF139-12S 3/4” to -12 AF137-12 AF137-12BLK AF137-12S

REPLACEMENT HARDLINE OLIVES

Size Part No
1/4”
5/16”
AF110-04
AF110-05
AN STAINLESS STEEL TUBE SLEEVES
3/8” AF110-06
1/2” AF110-08 Suit Tube Part No
5/8” AF110-10
3/4” AF110-12 3/16” AF819-03-SS
1/4” AF819-04-SS
Note: 2 Pack.
5/16” AF819-05-SS
3/8” AF819-06-SS
1/2” AF819-08-SS

AN STAINLESS STEEL TUBE NUTS

Suit Tube Part No
3/16,” AF818-03-SS
1/4” AF818-04-SS
5/16,” 3/8”, -6AN AF818-06-SS
1/2”, -8AN AF818-08-SS

162 aeroflowperformance.com
 HARDLINE FITTINGS & TOOLS

Red
AN ALUMINIUM TUBE SLEEVES (2 Pack)
Suit Tube Blue Black Silver Red HARDLINE PIPE CUTTER
3/16” AF819-03 AF819-03BLK AF819-03S AF819-03R Cut plastic, aluminium, copper or steel tubing without distorting or crushing.
1/4” AF819-04 AF819-04BLK AF819-04S Cutter works with tubing from 3.17mm (1/8”) up to 28.57mm (1-1/8”) and
5/16” AF819-05 AF819-05BLK AF819-05S has wide rollers for even tracking of cutter wheel, built in reamer for cleaning
3/8” AF819-06 AF819-06BLK AF819-06S inside of tubing and an extra cutting wheel.
1/2” AF819-08 AF819-08BLK AF819-08S
5/8” AF819-10 AF819-10BLK AF819-10S
3/4” AF819-12 AF819-12BLK AF819-12S
Part No Description
1” AF819-16 AF819-16BLK AF819-16S AF98-2022 Hardline pipe cutting tool

AN ALUMINUM TUBE NUTS (2 Pack)

Suit Tube Blue Black Silver Red
3/16” -3AN AF818-03 AF818-03BLK AF818-03S AF818-03R
1/4” -4AN AF818-04 AF818-04BLK AF818-04S

HARDLINE & HARDLINE FITTINGS

5/16” & 3/8” -6AN AF818-06 AF818-06BLK AF818-06S
1/2” -8AN
5/8” -10AN
AF818-08
AF818-10
AF818-08BLK
AF818-10BLK
AF818-08S
AF818-10S
CUSHIONED P-CLAMPS
3/4” -12AN AF818-12 AF818-12BLK AF818-12S
1” -16AN AF818-16 AF818-16BLK AF818-16S I.D. Blue Black Silver
10 PACKS
4.7mm 3/16” AF158-03 AF158-03BLK AF158-03S
6.3mm 1/4” AF158-04 AF158-04BLK AF158-04S
8mm 5/16” AF158-05 AF158-05BLK AF158-05S
9.5mm 3/8” AF158-06 AF158-06BLK AF158-06S
5 PACKS
12.6mm 1/2” AF158-08 AF158-08BLK AF158-08S
14.3mm 9/16” AF158-09 AF158-09BLK AF158-09S
15.8mm 5/8” AF158-10 AF158-10BLK AF158-10S
PIPE BEADING TOOL (Small bore) 19mm 3/4” AF158-12 AF158-12BLK AF158-12S
25mm 1” AF158-16 AF158-16BLK AF158-16S
Great for beading 5/16”, 3/8” and 1/2” pipe. Recommended for beading pipe 28.5mm 1-1/8” AF158-18 AF158-18BLK AF158-18S
for low pressure carburetor applications. For EFI applications it is 31.8mm 1-41/64” AF158-20 AF158-20BLK AF158-20S
recommeded to use a tube nut and sleeve. 38mm 1-1/2” AF158-24 AF158-24BLK AF158-24S
44.5mm 1-3/4” AF158-28 AF158-28BLK AF158-28S
Part No Description Tool O.D. 47.6mm 1-7/8” AF158-30 AF158-30BLK AF158-30S
AF98-2019 5/16” pipe beader 5.75mm 50.8mm 2” AF158-32 AF158-32BLK AF158-32S
AF98-2020 3/8” pipe beader 7.45mm
AF98-2021 1/2” pipe beader 10.45mm
CUSHIONED P-CLAMPS SIZE GUIDE
Part No I.D. Hard Line Braided Hose
-03 4.7mm 3/16” 3/16”
-04 6.3mm 1/4” 1/4” -3 200,250 Series
-05 8mm 5/16” -4 200,250 Series
-06 9.5mm 3/8” 3/8” -6 200,250. -4 100 & 450 Series
-08 12.6mm 1/2” 1/2” -4 400 Series
-09 14.3mm 9/16” 9/16” -8 200, 250 -6 100 & 450 Series
-5 400 Series
-10 15.8mm 5/8” 5/8” -10 200,250. -8 100 & 450 Series
-6 500 series -6 400 Series
-12 19mm 3/4” -10 100 & 450 Series, -8 500 series
-8 400 Series
-16 25mm 1” -12 100 & 450 Series -10 500 series
-10 400 Series
-18 28.5mm 1-1/8” -16 100 & 450 Series -12 400 Series
TUBE STRAIGHTENER -20 31.8mm 1-41/64”
-24 38mm 1-1/2” -20 100 & 450 Series
Great for straightening out coiled aluminium, mild steel and -28 44.5mm 1-3/4”
stainless steel pipe for that professional finish. -30 47.6mm 1-7/8”
-32 50.8mm 2”
Part No Description
AF98-2018 Fits tube from 4.76mm (3/16”) to 12.7mm (1/2”)

aeroflowperformance.com 163
 CLAMPS & SEPARATORS

STEPPED BILLET DUAL HOSE SEPARATORS

Aeroflow stepped design hose separators are made from 6061-T6 aluminium, these new billet
separators are a great option for those guys running different size lines and wanting to separate
them with a stylish billet clamp. These are a great way to keep your engine bay neat and tidy
while giving it that elite look.

Blue Red Black Silver Titanium

AF156-07-09 AF156-07-09R AF156-07-09BLK AF156-07-09S AF156-07-09T
AF156-07-10 AF156-07-10R AF156-07-10BLK AF156-07-10S AF156-07-10T
AF156-09-10 AF156-09-10R AF156-09-10BLK AF156-09-10S AF156-09-10T
AF156-09-12 AF156-09-12R AF156-09-12BLK AF156-09-12S AF156-09-12T
AF156-07-10T

AF156-08T

BILLET DUAL HOSE SEPARATORS

Blue Red Black Silver Titanium
AF156-03 AF156-03R AF156-03BLK AF156-03S AF156-03T
AF156-04 AF156-04R AF156-04BLK AF156-04S AF156-04T
AF156-05 AF156-05R AF156-05BLK AF156-05S AF156-05T
AF156-06 AF156-06R AF156-06BLK AF156-06S AF156-06T
AF156-07 AF156-07R AF156-07BLK AF156-07S AF156-07T
AF156-08 AF156-08R AF156-08BLK AF156-08S AF156-08T
AF156-09 AF156-09R AF156-09BLK AF156-09S AF156-09T
HARDLINE & HARDLINE FITTINGS

AF156-10 AF156-10R AF156-10BLK AF156-10S AF156-10T

AF156-12 AF156-12R AF156-12BLK AF156-12S AF156-12T
AF156-15 AF156-15R AF156-15BLK AF156-15S AF156-15T
AF156-17 AF156-17R AF156-17BLK AF156-17S AF156-17T

P-CLAMPS & HOSE SEPARATORS SIZE GUIDE

DUAL S/S HARDLINE CLAMPS
Part No I.D. Hard Line Braided Hose
Part No Description Pack
-03 4.7mm 3/16” 3/16”
-04 6.4mm 1/4” 1/4” -3 200, 250 Series AF300-03-03 4.76mm (3/16”) & 4.76mm (3/16”) Sold as singles
-05 7.9mm 5/16” 5/16” -4 200, 250 Series AF300-04-04 6.4mm (1/4”) & 6.4mm (1/4”) Sold as singles
-06 9.5mm 3/8” 3/8” -4 Kryptalon® AF300-06-01 4.76mm (3/16”) & 9.52mm (3/8”) 6 Pack
-07 11.1mm 7/16” -4 100,450 -6 200,250 AF300-06-05 7.93mm (5/16”) & 9.52mm (3/8”) 6 Pack
-08 12.7mm 1/2” 1/2” AF300-05-05 7.93mm (5/16”) & 7.93mm (5/16”) Sold as singles
-09 14.2mm 9/16” -6 100,450, Kryptalon, -8 200,250 AF300-06-06 9.52mm (3/8”) & 9.52mm (3/8”) Sold as singles
-10 15.9mm 5/8” 5/8” -8 100,450 -10 200,250 AF300-10-10 15.9mm (5/8”) & 15.9mm (5/8”) Sold as singles
-12 19.2mm 3/4” -10 100,450 Includes 1x 10-32 button head cap screw bolt and 1 x self tapper screw
-15 23.8mm 15/16” -12 100,450
-17 27.3mm 1-5/16” -16 100,450

BILLET P - CLAMPS (Singles) DUAL S/S HARDLINE CLAMP

Blue Red Black Silver WITH BRACKET
AF157-03 AF157-03R AF157-03BLK AF157-03S Part No Description
AF157-04 AF157-04R AF157-04BLK AF157-04S
AF157-05 AF157-05R AF157-05BLK AF157-05S AF301-03-03 4.76mm (3/16”) & 4.76mm (3/16”) Sold as singles
AF157-06 AF157-06R AF157-06BLK AF157-06S AF301-06-06 9.52mm (3/8”) & 9.52mm (3/8”) Sold as singles
AF157-07 AF157-07R AF157-07BLK AF157-07S Includes 1x 10-32 button head cap screw bolt and 1 x self tapper screw
AF157-08 AF157-08R AF157-08BLK AF157-08S
AF157-09 AF157-09R AF157-09BLK AF157-09S
AF157-10 AF157-10R AF157-10BLK AF157-10S
AF157-12 AF157-12R AF157-12BLK AF157-12S
AF157-15 AF157-15R AF157-15BLK AF157-15S
AF157-17 AF157-17R AF157-17BLK AF157-17S

164 aeroflowperformance.com
 FUEL FILTERS & ACCESSORIES

PRO FILTERS
When excellent filtration is the key to fuel system performance Aeroflow’s
Pro Filters provide an inexpensive insurance policy to protect your
investment. For 200 – 2700 plus HP applications, our filter assemblies
offer unmatched flow and ease of maintenance and installation.
The Pro Filters also include an internal magnet to catch fine particles and
are available in blue, black and silver.
Furthermore Aeroflow’s Pro Filters feature:
61mm • Anodised end caps which are compatible with E85 & methanol fuels
(2-13/32”) 31mm • Stainless steel reusable/washable element
(1-7/32”) • CNC-machined from 6061-T6 aircraft aluminium
• Serviceable filter elements
SHUT OFF VALVES FEMALE Note: Use Aeroflow AF920
Aeroflow’s shut off valve feature two female -10ORB ports. (see page 70)
They are both e85 and methanol safe, we do not recommend these for for positive sealing in
nitro fuel. These shut off valves are ideal for: high pressure applications.
• An emergency fuel shut-off • Anti-theft device • Drain valve

ORB Blue Black Silver

-10 AF1001-10 AF1001-10BLK AF1001-10S

89mm (3-1/2”) PRO FILTERS

FUEL SYSTEMS & EFI ACCESSORIES

89mm (3-1/2”) Long, 31.7mm (1-1/4”) diameter. Feature -8 ORB ports

SHUT OFF VALVES MALE

Micron Blue Black Silver
Aeroflow’s shut-off valves are also ideal for use as:
• An emergency fuel shut-off • Anti-theft device 10 AF66-2042-10 AF66-2042BLK-10 AF66-2042S-10
• Drain valve • 300 PSI Max • NOT recommended for Nitro fuel 40 AF66-2042-40 AF66-2042BLK-40 AF66-2042S-40
• Safe for use with E85 & Methanol 60 AF66-2042 AF66-2042BLK AF66-2042S

AN Blue Black Silver

-4 AF1000-04 AF1000-04BLK AF1000-04S
-6 AF1000-06 AF1000-06BLK AF1000-06S
-8 AF1000-08 AF1000-08BLK AF1000-08S
-10 AF1000-10 AF1000-10BLK AF1000-10S
-12 AF1000-12 AF1000-12BLK AF1000-12S
-16 AF1000-16 AF1000-16BLK AF1000-16S
140mm(5-1/2”) PRO FILTERS
140mm(5-1/2”) Long, 50mm (1.97”) diameter. Feature -12 ORB ports

Micron Blue Black Silver

10 AF66-2044-10 AF66-2044BLK-10 AF66-2044S-10
40 AF66-2044-40 AF66-2044BLK-40 AF66-2044S-40
60 AF66-2044 AF66-2044BLK AF66-2044S
100 AF66-2044-100 AF66-2044BLK-100 AF66-2044S-100

PRO FILTER WITH BALL VALVE

Part No Dimensions ORB (Micron)

AF66-2051 140mm (5-1/2”)x 50.8mm(2”) -12 60
AF66-2051BLK 140mm (5-1/2”)x 50.8mm(2”) -12 60
AF66-2051S 140mm (5-1/2”)x 50.8mm(2”) -12 60
178mm (7”) PRO FILTERS
REPLACEMENT FILTER PARTS
178mm (7”) Long, 60.6mm (2-13/32”) diameter. Feature -12 ORB ports

Part No Flow (Micron) Suits

Micron Blue Black Silver
AF59-2054 40 micron stainless steel element AF66-2051
AF59-2052 60 micron stainless steel element AF66-2051 10 AF66-2043-10 AF66-2043BLK-10 AF66-2043S-10
AF59-2051 100 micron stainless steel element AF66-2051 40 AF66-2043-40 AF66-2043BLK-40 AF66-2043S-40
AF59-2059 O-Ring set (4 x o-rings) AF66-2051 60 AF66-2043 AF66-2043BLK AF66-2043S
100 AF66-2043-100 AF66-2043BLK-100 AF66-2043S-100

aeroflowperformance.com 165
 FUEL FILTERS & ACCESSORIES

37o INLINE STAINLESS

REPLACEMENT S/STEEL FILTER ELEMENTS STEEL FLARE FILTERS
These great little 250 micron filters simply slide into your AN flare fittings for
Part No Flow (Micron) Suits Colour great inline filtration. For use with fuel, oil and water.
AF59-2421 10 micron AF66-2042 Red
AF59-2042 40 micron AF66-2042 Blue
Part No Description
AF59-2062 60 micron AF66-2042 Black AF37-06 -6AN universal 250 micron inline filter
AF59-2041 100 micron AF66-2042 Gold AF37-08 -8AN universal 250 micron inline filter
AF59-2441 10 micron AF66-2044 Red AF37-10 -10AN universal 250 micron inline filter
AF59-2444 40 micron AF66-2044 Blue AF37-12 -12AN universal 250 micron inline filter
AF59-2066 60 micron AF66-2044 Black AF37-16 -16AN universal 250 micron inline filter
AF59-2044 100 micron AF66-2044 Gold AF37-20 -20AN universal 250 micron inline filter
AF59-2431 10 micron AF66-2043 Red AF37-24 -24AN universal 250 micron inline filter
AF59-2443 40 micron AF66-2043 Blue
AF59-2163 60 micron AF66-2043 Black
AF59-2143 100 micron AF66-2043 Gold
AF59-2040 Replacement O-rings to suit all Pro Filters

FILTER ELEMENT APPLICATION GUIDE

Micron Particle Size Colour Application
FUEL SYSTEMS & EFI ACCESSORIES

10 .0013in Red Pump Fuel

40 .0018in Blue Pump Fuel / Oil / Alcohol / Ethanol Length
60 .0023in Black Pump Fuel / Oil / Alcohol / Ethanol
100 .0039in Gold Oil / Alcohol / Ethanol
INLINE FUEL AND OIL FILTERS
Kit includes filter, 30, 80 & 150 micro baskets, male and female AN adapters

AN Length Blue Black Silver

BILLET -3AN 16mm 5/8” AF608-03 AF608-03BLK AF608-03S
FILTER -4AN
-6AN
17mm
24mm
43/64”
61/64”
AF608-04
AF608-06
AF608-04BLK
AF608-06BLK
AF608-04S
AF608-06S
BRACKETS -8AN 26mm 1-1/32 AF608-08 AF608-08BLK AF608-08S
Bracket thickness is 12.7mm (1/2”) NOTE: - Includes 30, 80 and 150 micron elements allowing you to tailor the filter
Bottom mount thread is M6 x 1mm to suit your application. Large filtration basket. 30 micron recommended for light /
medium weight engine oil and pump fuel. 80 micron recommended for heavy weight
Size ID Black Polished ø to ø engine oil, alcohol and ethanol fuel systems. 150 micron recommended for power
steering and transmission oil.
31.7mm (1-1/4” ) AF66-2049BLK AF66-2049 62.5mm 2-15/32”
50mm (1.97”) AF66-2045BLK AF66-2045 79.5mm 3-1/8”
60mm (2-13/32”) AF66-2046BLK AF66-2046 82mm 3-15/64”

CARBURETTOR BILLET FUEL FILTERS

(30 Micron Filter)
Aeroflow’s fuel filters are CNC machined from billet aluminium with a
removable bronze element and are available with either AN fittings or hose
barbs. Recomended for carburettor applications.

DUAL BILLET FILTER BRACKETS AN/Barb Length Blue Black Silver

-6 50.8mm (2”) AF609-06 AF609-06BLK AF609-06S
Aeroflow dual bracket is perfect for mounting your fuel filters or brake/clutch -8 50.8mm (2”) AF609-08 AF609-08BLK AF609-08S
reservoirs side by side for a neat compact mounting option, available in 7.93mm (5/16”) 50.8mm (2”) AF610-05 AF610-05BLK AF610-05S
polished and black anodised finish. Suits Aeroflow Pro Filter (AF64-2043) and 9.52mm (3/8”) 50.8mm (2”) AF610-06 AF610-06BLK AF610-06S
the new billet brake / clutch reservoirs (AF64-2150). 12.7mm (1/2”) 50.8mm (2”) AF610-08 AF610-08BLK AF610-08S
Bracket thickness is 12.7mm (1/2”)
Bottom mount thread is M6 x 1mm NOTE: Filters above suit 31.75mm (1-1/4”) Filter Brackets

Size ID Black Polished ø to ø Replacement Filters

AF610F 30 Micron Bronze Filter (NOT for Alcohol)
60mm (2-13.32”) AF66-2246BLK AF66-2246 177mm 6-31/32” AF610F-150 150 Micron Bronze Filter (For Alcohol/ Ethanol) AF610F-150

166 aeroflowperformance.com
 FUEL FILTERS & ACCESSORIES

CHECK VALVES

Height

Flow
EFI BILLET FUEL FILTER direction

This CNC machined fuel filter features a flat stainless steel 40 micron element Male AN inlet to female ORB outlets. Adjustable from 3 - 5 PSI.
that can be easily cleaned to maintain an efficient fuel system. Flows male to female
Total length 93mm (3-19/32”), body length 45mm (1-49/64”),
diameter 32mm (1-1/4”). Recommended for EFI applications. AN Height Blue Black Silver
-6 42mm 1-21/32” AF613-06 AF613-06BLK AF613-06S
AN Blue Black Silver Polished
-8 47mm 1-27/32” AF613-08 AF613-08BLK AF613-08S
-6 AF66-2052 AF66-2052BLK AF66-2052S AF66-2052P
-8 AF66-2053 AF66-2053BLK AF66-2053S AF66-2053P
40 Micro S/S replacement element AF59-2053

Length

FUEL SYSTEMS & EFI ACCESSORIES

LONG INLINE FUEL AND
OIL FILTERS
This CNC machined filter features a large surface area cone design stainless ONE WAY CHECK VALVES
steel 30 micron element that can be easily cleaned to maintain an efficient Comes with 1.5 PSI spring
fuel or oil system. 63mm (3”) long 25.4mm (1”) O.D.
AN Length Blue Black Silver
AN Blue Black Silver -6 29mm 1-9/64” AF612-06 AF612-06BLK AF612-06S
-3 AF607-03 AF607-03BLK AF607-03S -8 29mm 1-9/64” AF612-08 AF612-08BLK AF612-08S
-4 AF607-04 AF607-04BLK AF607-04S -10 35mm 1-3/8” AF612-10 AF612-10BLK AF612-10S
-6 AF607-06 AF607-06BLK AF607-06S -12 35mm 1-3/8” AF612-12 AF612-12BLK AF612-12S
-16 35mm 1-3/8” AF612-16 AF612-16BLK AF612-16S
OPTIONAL 5 PSI SPRING
AF59-6121 Suits -6 and -8 check valve
AF59-6122 Suits -10 and -12 check valve
AF59-6123 Suits -16 check valve
Note: Spring can be easily removed to act as a inline roll over vent.
Supplied with Buna N O-ring and EPR O-ring for use with Nitro blended fuels

35mm
1-3/8”
70mm 70mm
2-3/4” 2-3/4”

AF66-2056 AF66-2057

BILLET FUEL FILTER TO SUIT

GM (HOLDEN) & FORD STEPPED ONE WAY CHECK VALVES
This CNC machined fuel filter features a stainless steel 40 micron element Aeroflow’s one way check valves. These check valves can be dismantled
that can be easily cleaned to maintain an efficient fuel system. Replaces and the spring inside removed to double up to become a Rollover Valve.
standard factory fuel filter. -6ORB threads when fittings removed. Being stepped from -12 to -8AN makes it perfect to run a fuel return line
when used with Aeroflow fuel cells.
Make Black Equivalent
FORD* AF66-2056 Z373 AN in AN out Blue Black Silver
GM AF66-2057 Z586
-12 -8 AF612-12-08 AF612-12-08BLK AF612-12-08S
10 Micro S/S replacement element AF59-2063
40 Micro S/S replacement element AF59-2057 Note: Spring can be easily removed to act as a inline roll over vent.
Supplied with Buna N O-ring and EPR O-ring for use with Nitro blended
fuels
* Also fits EB-EL and BA-BF Ford Falcon and Mitsubishi Evolution.
aeroflowperformance.com 167
 FUEL LOGS

CHECK VALVE 5PSI

SPRING
This Check Valve 5 PSI spring is to suit Aeroflow’s AF612 style One
Way Check Valves. These check valve springs will have a spring crack
pressure of 5 PSI. AF456-01-04S
AF456-01-04
AF456-01-04BLK
Part No Description
AF59-6121 Suits AF612-06 and AF612-08
AF59-6122 Suits AF612-10 and AF612-12
AF59-6123 Suits AF612-16

AF456-02-04S
Regulators not
included AF456-02-04BLK
AF456-02-04
B

C
A

AF929-10 ORB male couplers used

to attached regs to log. Not Included

BILLET 4 PORT FUEL LOG See page 70

AF456-01-06S
A Length 119mm (4-11/16”), B Width 31.65mm (1-15/64”), AF456-01-06BLK
AF456-01-06
FUEL SYSTEMS & EFI ACCESSORIES

C Height 36.8mm (1-7/16”)

ORB Blue Black Silver

-8 AF452-08 AF452-08BLK AF452-08S UNIVERSAL COMPACT BILLET
-10
-12
AF452-10
AF452-12
AF452-10BLK
AF452-12BLK
AF452-10S
AF452-12S DISTRIBUTION BLOCKS
Aeroflow Performance has designed these compact distribution blocks for
universal applications. Such as a vacuum block distribution to plumb up
B additional vacuum ports for accessories like MAP sensors, boost gauges,
blow off valves, or hooking up individual throttle bodies. Coolant lines for
header tanks or LS steam pipe lines and nitrous oxide lines. Available with 1
or 2 ports in and 4 ports out and 1 port in and 6 ports out, these ports are all
1/8” NPT. The compact design measures just 60mm length, 35mm width and
C 12.70mm thickness and comes in blue, black and silver colour options.
A
NPT No for Ports Blue Black Silver
STEPPED BILLET 5 PORT FUEL LOG 1/8” 1 x in, 4 x out AF456-01-04 AF456-01-04BLK AF456-01-04S
A Length 89.4mm (3-33/64”), B Width 24.5mm (31/32”), 1/8” 2 x in, 4 x out AF456-02-04 AF456-02-04BLK AF456-02-04S
C Height 36.8mm (1-7/16”) 1/8” 1 x in, 6 x out AF456-01-06 AF456-01-06BLK AF456-01-06S
Log has 3 x -6 ports on top and -8 ports either end.
10/32 UNF Thread mounting holes.

ORB Blue Black Silver

3 x -6, 2 x -8 AF456-08-06 AF456-08-06BLK AF456-08-06S

C A

BILLET 5 PORT FUEL LOG POWER VALVE BLANK PLUG

Log has 3 x ORB ports on top and 2 x ORB ports either end.
Aeroflow’s Power Valve Blank Plug and Teflon Washer will fit any Holley
A Length 160mm (6-19/64”), B Width 28.75mm (1-9/64”), carburettor with 1/2 -28 threads. This power valve blank plug is the only way
C Height 36.8mm (1-7/16”) to properly block off the power valve circuit in Holley carburettors.

ORB Blue Black Silver Blue Black Silver

5 x -8 AF457-08 AF457-08BLK AF457-08S AF699-00 AF699-00BLK AF699-00S
5 x -10 AF457-10 AF457-10BLK AF457-10S NOTE: Replacement Teflon washers AF59-2671 (2 per pack)
5 x -12 AF457-12 AF457-12BLK AF457-12S

168 aeroflowperformance.com
 CARBURETTOR ACCESSORIES

FUEL BOWL BLANK-OFF PLUG

Aeroflow’s fuel bowl inlet blank-off plug will fit any Holley carburettor with
7/8” -20 threads. This plug is the only way to properly block off the Holley CARBURETTOR ADAPTERS FEMALE
fuel bowls. Aluminium crush washer included.
-6 = 38.1mm (1-1/2”)
Blue Black Silver -8 = 63.5mm (2-1/2”)

AF700-00 AF700-00BLK AF700-00S AN Blue Black Silver

HOLLEY
-6 AF160-06-1 AF160-06-1BLK AF160-06-1S
-8 AF160-08-1 AF160-08-1BLK AF160-08-1S
NOTE: Optional Teflon washers AF59-2671 (2 per pack)
HOLLEY ULTRA HP
-8 AF165-08-1 AF165-08-1BLK AF165-08-1S

BARRY GRANT / DEMON

-6 AF161-06-1 AF161-06-1BLK AF161-06-1S
-8 AF161-08-1 AF161-08-1BLK AF161-08-1S

FUEL SYSTEMS & EFI ACCESSORIES

NOTE: - Sold in pairs Includes washers.

ALLOY BANJO WITH BOLT

To suit Edelbrock Carburettors
Banjo to Barb Blue Black Silver
5/8” to 3/8” AF164-06 AF164-06BLK AF164-06S
NOTE: 5/8” Banjo bolt included

CARBURETTOR ADAPTERS MALE

-6AN = 25.4mm (1”)
-8AN = 44.45mm (1-3/4”)

See page 198 - 200

for more carburettor Size Blue Black Silver
accessories. HOLLEY INLET FEED (Sold as Pairs)
7/8” -20 to 3/8” Barb AF700-01 AF700-01BLK AF700-01S
7/8” -20 to 1/2” Barb AF700-02 AF700-02BLK AF700-02S
7/8” -20 to -6 AN Short AF700-06 AF700-06BLK AF700-06S
7/8” -20 to -6 AN Long AF700-06-L AF700-06-LBLK AF700-06-LS
7/8” -20 to -8AN AF700-08 AF700-08BLK AF700-08S
Optional Teflon washers AF59-2671 (2 per pack)

HOLLEY ULTRA HP INLET FEED ( Sold individually, 1 per pack)

-8ORB to -8AN AF953-08 AF953-08BLK AF953-08S

DEMON / HOLLEY INLET FEED (short = 1”, Long = 1.75”) (Sold as Pairs)
9/16”-24 to -6 Short AF701-06 AF701-06BLK AF701-06S
ALLOY BANJO WITH BOLT 9/16”-24 to -6 Long
9/16”-24 to -8AN
AF701-06-L
AF701-08
AF701-06-LBLK AF701-06-LS
AF701-08BLK AF701-08S
To suit Holley & Barry Grant Carburettors
QUADRAJET INLET FEED ( Sold individually, 1 per pack)
Also suits FiTech EFI throttle bodies Male -6 to 1”-20 AF708-06BLK
Banjo to AN Blue Black Silver CARTER / EDELBROCK INLET FEED ( Sold individually, 1 per pack)
9/16-24” to -6AN AF167-06 AF167-06BLK AF167-06S Male -6 to 5/8” -20 AF706-06 AF706-06BLK AF706-06S

aeroflowperformance.com 169
 CARBURETTOR ACCESSORIES

MALE AN STEPPED FLARE TEE WITH

1/8” NPT PORTS
HOLLEY / STROMBERG INLET FITTINGS Perfect for use with Aeroflow’s -8AN carb inlet rail kits when running -6 feed
These handy adapters are designed to work with the factory Holley and line featuring dual 1/8” NPT ports for universal gauge fitments.
Stromberg inlet fittings. Male tee with 2 x -8 and 1 x -6 on run

Silver Black Description Angle Part No Description

AF714-24 AF714-24BLK 1/2” -20 thread to 5/16” barb Straight AF824-06-08 Blue male tee with 2 x -8 and 1 x -6 on run
AF714-26 AF714-26BLK 1/2” -20 thread to 5/16” barb 90o AF824-06-08BLK Black male tee with 2 x -8 and 1 x -6 on run
AF714-31 AF714-31BLK 5/8” -18 thread to 3/8” barb Straight AF824-06-08S Silver male tee with 2 x -8 and 1 x -6 on run
AF714-27 AF714-27BLK 5/8” -18 thread to 3/8” barb 90o

NOTE: AF160-08 rails (pictured

STEEL FUEL RAILS
FUEL SYSTEMS & EFI ACCESSORIES

above) only suit dual metering

blocks. They are NOT suited to
Aeroflow’s hand polished and chrome plated or black coated fuel rails are single metering block carbies. All
a perfect choice for your 4150 and 4160 style carburettors, featuring a 3/8” rails include provision for gauge or
male barb for ease of fitment and a 1/8” NPT auxiliary port with plug for the auxiliary line.
option of running a pressure gauge. 4150 models feature 239mm (9-5/32”)
centres and 4160 models suit 222mm (8-19/64”) centres. CARBURETTOR DUAL INLET RAIL KITS
Part No Description Size Blue/Red Black Silver
AF30-4150 Chrome 4150 Models, 9.52mm (3/8”) Barb Inlet HOLLEY DUAL FUEL LINE
AF30-4150BLK Black 4150 Models, 9.52mm (3/8”) Barb Inlet -6AN AF160-06-2 AF160-06-2BLK AF160-06-2S
AF30-4160 Chrome 4160 Models, 9.52mm (3/8”) Barb Inlet -8AN (241mm) 4150 AF160-08 AF160-08BLK AF160-08S
AF30-4160BLK Black 4160 Models, 9.52mm (3/8”) Barb Inlet 3310 VAC AF160-08V AF160-08VBLK AF160-08VS

HOLLEY FUEL LINE

-8AN Dominator AF162-08 AF162-08BLK AF162-08S

NOTE: Optional Teflon washers AF59-2671 (2 per pack)

HOLLEY ULTRA HP Aluminium Series FUEL LINE
-8AN ULTRA HP AF165-08 AF165-08BLK AF165-08S

BARRY GRANT / DEMON DUAL FUEL LINE

-8AN AF161-08 AF161-08BLK AF161-08S

NOTE: AF160-06 rails pictured.

Suit single and dual metering blocks.
All rails include provision for gauge or
auxiliary line.
DUAL INLET FUEL LINE KIT
Aeroflow’s dual inlet fuel line kits utilise 3/8” seamless stainless steel tubing
with stainless steel fittings for two Holley double pumper carbs mounted
sideways. The kit includes Holley carb 7/8”-20 fuel inlet to -6 AN fittings and
provides a single fuel connection per carb to supply fuel to both carb bowls.
Works on tunnel rams and blower setups. Kits are available in show quality
CARBURETTOR INLET RAIL KITS
polished finish or black finish.
Size Blue/Red Black Silver
Part No Finish Description HOLLEY DUAL FUEL LINE
AF30-2671 Polished 4150 dual feed fuel line kit -6AN AF160-06 AF160-06BLK AF160-06S
AF30-2671BLK Black 4150 dual feed fuel line kit BARRY GRANT / DEMON DUAL FUEL LINE
-6AN AF161-06 AF161-06BLK AF161-06S
NOTE: Optional Teflon washers AF59-2671 (2 per pack)

170 aeroflowperformance.com
 CARBURETTOR ACCESSORIES

Comes
standard with
carburettor
Spring
installed.

Inlet Inlet

Return Return

CARB & EFI FUEL PRESSURE

REGULATOR (Return style)
These fuel regulators allow carburettor fuel systems to be converted to EFI
high pressure fuel systems while still utilising the same regulator by easily
changing the internal spring. With a carburettor pressure spring installed out
of the box which allows adjustability of 3 - 20 psi (0.26 - 1.37 BAR), simply
unscrew the top half of the fuel regulator and install the efi spring which
will now allow adjustability of 20-60 psi (1.37 - 4.13 BAR). Being a compact
design with height of only 115mm (4-33/64”), diameter of 53mm (2-5/64”)
and can be installed anywhere with the supplied billet mounting bracket.
Featuring 3 x -8 orb ports and a 1/8 npt port up front it is also available in
both chrome and black anodized finishes.
ADJUSTABLE BILLET FUEL LOGS
Aeroflow’s Fuel Log features ball and socket assemblies that swivel + / - 20 Part No Ports Colour
degrees, allowing additional clearance for throttle stops, nitrous plates and

FUEL SYSTEMS & EFI ACCESSORIES

AF66-2059 2 x -8ORB inlets 1 x -8ORB return Polished
other accessories. The telescopic log will fit 4150 style carburettors, 4500 series AF66-2059BLK 2 x -8ORB inlets 1 x -8ORB return Black
Dominator, Ultra HP and Barry Grant carburettors. The Fuel Log is -10 ORB and is
supplied with a blank plug and -8AN adapter for front or rear entry.

Blue Red Black Silver Chrome For EFI

Regulators se
AF64-2037 AF64-2037R AF64-2037BLK AF64-2037S AF64-2037C page 184 e
NOTE: - Comes with fittings to suit both style Holley’s and Barry Grant
carburettors.
NOTE: - Replacement nylon sliding log washers available separately AF59-2037
NOTE: Optional Teflon bowl washers AF59-2671 (2 per pack)

BYPASS FUEL PUMP REGULATORS

Aeroflow’s billet bypass 4.5-9 PSI regulator is available with either 3/8” NPT
or -8 ORB female threads and are the perfect choice for fuel systems running
a return line to the tank with added benefit of less load on the fuel pump,
BILLET CARB FUEL PRESSURE REGULATOR resulting in quieter fuel pump operation, cooler fuel and improved fuel pump
life. Available in blue, black and red anodised or polished finishes. Suitable for
Machined from billet 6061-T6 aluminium and anodized, E85 and Alcohol use with pump fuel, E85, alcohol, diesel fuels.
compatible. Fast response, low maintenance. Note: Recommended for use with carburettor fuel pumps only.
Precise pressure control. 1/8 NPT Gauge port on all models
-10 feed on all regulators.
Adjustable base pressure Part No Description Colour
• 2 Port Reg rated to 750 HP ( 4 - 12 PSI )
• 4 Port Reg rated to 1600HP ( 4 - 12 PSI ) AF49-4501 -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Blue
AF49-4501BLK -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Black
AF49-4501R -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Red
Ports Blue Black Polished AF49-4501P -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Polished
2 x -8 ORB AF66-2047 AF66-2047BLK AF66-2047P
4 x -6 ORB AF66-2048 AF66-2048BLK AF66-2048P AF49-4500 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Blue
AF49-4500BLK 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Black
Note: Fittings not included
AF49-4500R 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Red
Note: Replacement diaphragm 2 Port is AF59-2049 AF49-4500P 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Polished
4 Port is AF59-2048
Note: AF59-4500 replacement diaphragm & spring.

AF59-2049 AF59-2048
aeroflowperformance.com 171
 FUEL SYSTEM ACCESSORIES

Typical RETURN
style fuel system

Typical DEAD HEAD

(NON return) style
fuel system

FUEL PUMPS
The Aeroflow Performance Red, Blue and Black fuel pumps are a proven rotor
/ vane design that is known to get the job done in an affordable package for
your carburettor fuel system. Aeroflow have three different options available to
choose from:

Aeroflow RED Fuel Pumps

FUEL SYSTEMS & EFI ACCESSORIES

The RED fuel pump is a low-pressure fuel pump which operates at a free flow 97
GPH at a set pressure of 7PSI (0.48BAR) and does not require the use of any
fuel regulators. This meets the flow requirements of most carburettor vehicles.
This motor draws 2 amps current and an 8amp fuse is recommended.

Aeroflow BLUE Fuel Pumps

The BLUE fuel pump is a high-pressure fuel pump which operates at a free
flow 110 GPH at a set pressure of 14PSI (0.96BAR). We recommend the
use of a carburettor fuel regulator. This meets the flow high performance
carburettor applications. This motor draws 2 amps current and an 8amp fuse is
recommended.

Aeroflow BLACK Fuel Pumps

The BLACK fuel pump is a high-pressure fuel pump which operates at a
FUEL PUMP REGULATORS free flow 140 GPH at a set pressure of 14PSI (0.96BAR). We recommend
the use of a carburettor fuel regulator. This meets the flow high performance
Billet 2 port carb regulators. Made from billet 6061-T6 aluminium, these carburettor applications. This motor draws 2 amps current and an 8amp fuse is
regulators are an ideal replacement/upgrade for the traditional Holley style 2 recommended. This fuel pump is suited for all alcohol and methanol compatible
port regulator. Comes in 2 different port styles, 3/8” NPT or -8 ORB and in 2 applications.
adjustment ranges, 1 – 4 PSI or 4.5 – 9 PSI. Available in 4 different finishes.
Comes with chrome mounting bracket and mounting screws. Suitable for use These fuel pumps MUST be located below and as close to the tank as possible.
with pump fuel, E85, alcohol, diesel fuels. This is necessary to allow for an adequate fuel supply. It is designed to push fuel
Note: Recommended for use with carburettor fuel pumps only. and not designed to pull fuel out of the tank. The pump should be mounted on
the chassis, in a vertical position with the pump motor on top.
Part No Description Colour All fuel pumps feature two female 3/8 NPT ports on either side. They can be
AF49-3001 -8 ORB 1 - 4PSI 0.06 - 0.27 BAR Blue serviced from the pump end with repair kits that are readily available.
AF49-3001BLK -8 ORB 1 - 4PSI 0.06 - 0.27 BAR Black Overall Length = 93mm (3-21/32”)
AF49-3001R -8 ORB 1 - 4PSI 0.06 - 0.27 BAR Red Overall Width = 79mm (3-7/64”)
AF49-3001P -8 ORB 1 - 4PSI 0.06 - 0.27 BAR Polished Overall Height = 140mm (5-33/64”)
Centre to Centre of mounting tabs on bracket = 60mm (2-23/64”)
AF49-3000 -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Blue
AF49-3000BLK -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Black
AF49-3000R -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Red
AF49-3000P -8 ORB 4.5 - 9PSI 0.31 - 0.62 BAR Polished Part No Description Use with
AF49-1008 Red Fuel Pump 7 PSI 97 GPH (12-801) Petrol
AF49-4001 3/8” NPT 1 - 4PSI 0.06 - 0.27 BAR Blue AF49-1009 Blue Fuel Pump 14 PSI 110GPH (12-812) Petrol
AF49-4001BLK 3/8” NPT 1 - 4PSI 0.06 - 0.27 BAR Black AF49-1010 Black Fuel Pump 140 GPH (12-815) Petrol/Alcohol/Diesel
AF49-4001R 3/8” NPT 1 - 4PSI 0.06 - 0.27 BAR Red AF49-1018 Fuel Pump Replacement plate & brushes
AF49-4001P 3/8” NPT 1 - 4PSI 0.06 - 0.27 BAR Polished
Note: 3/8” NPT thread
AF49-4000 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Blue
AF49-4000BLK 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Black AF49-1018
AF49-4000R 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Red
AF49-4000P 3/8” NPT 4.5 - 9PSI 0.31 - 0.62 BAR Polished

Note: AF59-4000 replacement diaphragm AF59-4000

with high and low pressure springs.

172 aeroflowperformance.com
 FUEL PUMPS & ACCESSORIES

SUPER LOW PRESSURE FUEL PUMP LOW PRESSURE FUEL PUMP

Great for low pressure fuel systems or as a lift pump for efi systems.
Great for use with low pressure fuel systems or for use as lift pump in EFI
Designed to be used with unleaded or diesel fuels. Supplied with a 100
systems (ie surge tank feed). Designed to be used with unleaded or diesel
micron pre-filter & mounting bolts. Inlet & outlet ports are 1/8” NPT female
fuels. Supplied with 100 micron pre-filter & mounting bolts. Inlet and outlet
thread, also supplied with 8mm ( 5/16” ) barb adapters. It flows 25 GPH and
are 1/8” NPT female thread, 132.5lph (35gph), 4 - 7 psi (.27 - .48 bar)
operates at 1.5-4 psi ( 0.10 – 0.27 bar ).
also supplied with 8mm ( 5/16” ) barb adapters.

Part No Description Part No Description

AF49-1054 Super low pressure in-line fuel pump AF49-1033 Low pressure in-line fuel pump

FUEL SYSTEMS & EFI ACCESSORIES

UNIVERSAL EFI FUEL DELIVERY KIT

Aeroflow has designed a complete fuel delivery kit that gives you everything you need to supply fuel to your EFI throttle body. This supplies enough fuel for up to
600hp. Note: when using this fuel pump a return line to the fuel tank is required.
The Kit includes:
1 x AF49-1014 external fuel pump. 2 x -6 to 3/8” straight barb adapters
1 x Billet bracket to suit external fuel pump 2 x -6 to 3/8” 45 degree barb adapters
1 x 89mm (3-1/2”) billet pro fillter 100 micron pre-pump filter 2 x -8ORB to 3/8” straight barb to suit pro filter
1 x Billet P-clamp to suit pro filter 1 x M18 x 1.5mm to 3/8” straight barb to suit pump inlet
1 x Billet after pump fuel filter 30 micron 1 x M12 x 1.5mm to 3/8” straight barb to suit pump outlet
1 x -6 90 degree bulkhead with nut 2 x 14mm (9/16”) ID stat-o-seals
10 x EFI fuel line clamps
15m (49.2ft) 400 series -6 (9.52mm 3/8”) rubber fuel hose

Part No Description
AF66-40005 Universal EFI fuel delivery kit

aeroflowperformance.com 173
 EFI FUEL PUMPS

EFI PUMPS All pumps are Alcohol & Ethanol compatible Typical fuel pump relay wiring diagram.
Fuel pump wiring kits, relays and more on page 247

EFI FUEL PUMP FITMENT TECHNICAL DATA

Part No Flow (Pressure) Inlet Outlet Length Diameter Methanol/Alcohol Note
LPH GPH Bar PSI mm inch mm inch compatible Replaces
AF49-1012 158 41.7 5 72.5 Screen 8mm 5/16” barb 125mm 4-59/64” 38mm 1-1/2” Yes GSS342
AF49-1041 340 89.8 3 43.5 Screen 9.6mm 3/8” barb 130mm 5-1/8” 40mm 1-9/16” Yes A11142
AF49-1042 430 113.6 2 29 Screen 9.6mm 3/8” barb 130mm 5-1/8” 40mm 1-9/16” Yes F90000267
AF49-1057 525 138.7 2 29 Screen 9.6mm 3/8” barb 130mm 5-1/8” 40mm 1-9/16” Yes F90000267
AF49-1013 260 68.7 5 72.5 Screen M12 x 1.5mm 124mm 4-7/8” 60mm 2-3/8” Yes Bosch 023
AF49-1040 325 85.8 2 29 Screen factory hanger 65mm 2-1/2” 38mm 1-1/2” Yes factory pump
AF49-1014 260 68.7 5 72.5 M18 x 1.5 M12 x 1.5mm 145mm 5-45/64” 60mm 2-3/8” Yes Bosch 044
AF49-1015 170 44.9 5 72.5 M14 x 1.5 M12 x 1.5mm 175mm 6-7/8” 60mm 2-3/8” Yes Bosch 979
AF49-1015B 170 44.9 5 72.5 1/2” barb M12 x 1.5mm 195mm 7-43/64” 60mm 2-3/8” Yes Bosch 984
AF49-1032 180 47.5 3 43.5 5/16” EFI 7.93mm 5/16”EFI 140mm 5-1/2” 52mm 2-1/25” N0 Bosch 116
AF49-1047 265 70 4 59 Screen Factory hanger 136mm 5-23/64” 50mm 2” Yes DW65V
AF49-1062 265 70 4 59 Screen Factory hanger 136mm 5-23/64” 50mm 2” Yes Factory pump
FUEL SYSTEMS & EFI ACCESSORIES

AF49-1214

AF49-1014
This Aeroflow Performance fuel pump delivers outstanding performance
and durability and is one of the most popular pumps on the market for
performance and racing applications. This fuel pump is very versatile,
allowing you to mount your fuel pump externally as an inline pump, or as
an in-tank pump. While producing 300LPH (79.25GPH) of fuel flow and
operating at 72.5PSI (4.99BAR). With this fuel pump, you will be able to
support 675 horsepower. It features a check valve already screwed into the
outlet, if you leave it in you need to run a banjo fitting off it as it has a tapered
BRUSHLESS FUEL PUMP thread. It is quite common for people to remove the check valve and screw
an adaptor straight into the outlet. If you do this, you will need to put an
aftermarket check valve inline to keep fuel pressure in your fuel lines.
Aeroflow Performance would like to introduce the new brushless AF49-
•Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric
1214 fuel pump. For classic performance with more heart we used the
properties of Alcohol fuel like E85, fuel pump service life will be reduced and
original design of the very popular AF49-1014. So this features all the same
filter maintenance must be increased.
dimensions, electrical connections and internal threads so it’s a very easy
•M18 x 1.50mm Inlet
and convenient direct swap over.
•M12 x 1.50mm Outlet
These brushless motors use sensors to monitor the angle of the rotor for
•Body Length is 146mm (5-47/64”)
faster and more reliable phase shifting allowing for more torque capacity
•Diameter
Code is 60mm (2-23/64”)
NO.:AF49-1014
and efficiency. The armature in a brushless motor is stationary. Instead,
•Electrical connections: positive terminal is M6 and negative terminal is M5
the magnets rotate around the armature and the motor controller manages TESTING PARAMETER:
the phase shift to keep the motor in motion providing more torque per watt, TESTING VOLTAGE:13.5V
higher torque to weight ratio, lower noise and higher reliability. This provides
precise control of fuel pressure under tight tolerances resulting in less current PRESSURE(PSI) 0 14.5 29 43.5 58 72.5 87
PRESSURE(BAR) 0 1 2 3 4 5 6
draw, less heat, less noise and extended life. FLOW(GPH) 92.4 89.8 84.5 79.2 73.9 68.7 63.4
While producing 420LPH (110GPH) of fuel flow and operating at 72.5PSI FLOW(L/H) 350 340 320 300 280 260 240
(4.99BAR).With this fuel pump, you will be able to support 900 horsepower. CURRENT(A) 8.2 8.6 9.9 11.3 12.7 14.2 15.5

It features a check valve already screwed into the outlet, if you leave it in you
need to run a banjo fitting off it as it has a tapered thread. It is quite common
PRESSURE-FLOW-CURRENT DIAGRAM
for people to remove the check valve and screw an adaptor straight into the
outlet. If you do this, you will need to put an aftermarket check valve inline to 400 20
keep fuel pressure in your fuel lines. 350 18
•Compatible with Unleaded, E85 and Methanol Fuels ( Due to the dielectric 16
properties of Alcohol fuel like E85, fuel pump service life will be reduced and
300
14
filter maintenance must be increased.
CURRENT(A)

250
FLOW(L/H)

12

•M18 x 1.50mm Inlet 200 10

•M12 x 1.50mm Outlet 150 8

•Body Length is 153mm (6-1/64”) 100

6

•Diameter is 60mm (2-23/64”) 4

50
•Electrical connections: positive terminal is M6 and negative terminal is M5 2

• Amp current draw at 30PSI (2BAR) 7 amps. 0

0 1 2 3 4 5 6
0

PRESSURE(BAR)

FLOW(L/h) CURRENT(A)

174 aeroflowperformance.com
 EFI FUEL PUMPS

AF49-1013 AF49-1015

This Aeroflow Performance fuel pump delivers outstanding performance This Aeroflow Performance fuel pump delivers outstanding performance
and durability and is one of the most popular pumps on the market for and durability and is one of the most popular pumps on the market for
performance and racing applications. This fuel pump is almost identical the performance and racing applications. This fuel pump is almost identical the
AF49-1013 but is only suitable for In-Tank applications. It features a screen AF49-1013 but features a smaller M14 x 1.5mm inlet and M12 x 1.5mm
on the bottom of the fuel pump which acts like a filter to keep any unwanted outlet. The Fuel pump features a pressure relief valve & check valve
debris from entering the pump. While producing 300LPH (79.25GPH) of fuel that is built into the top outlet of the fuel pump. While producing 300LPH
flow and operating at 72.5PSI (4.99BAR). With this fuel pump, you will be (79.25GPH) of fuel flow and operating at 72.5PSI (4.99BAR). With this fuel
able to support 675 horsepower. It features a check valve already screwed pump, you will be able to support 675 horsepower.
into the outlet, if you leave it in you need to run a banjo fitting off it as it has a •Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric
tapered thread. It is quite common for people to remove the check valve and properties of Alcohol fuel like E85, fuel pump service life will be reduced and
screw an adaptor straight into the outlet. If you do this, you will need to put filter maintenance must be increased.
an aftermarket check valve inline to keep fuel pressure in your fuel lines. •M14 x 1.50mm Inlet
•Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric •M12 x 1.50mm Outlet
properties of Alcohol fuel like E85, fuel pump service life will be reduced and •Body Length is 176mm (6-59/64”)
filter maintenance must be increased. •Diameter is 60mm (2-23/64”)
•M18 x 1.50mm Inlet •Electrical connections: positive terminal is M6 and negative terminal is M5
•M12 x 1.50mm Outlet
•Body Length is 123mm (4-27/32”)

FUEL SYSTEMS & EFI ACCESSORIES

•Diameter is 60mm (2-23/64”)
•Electrical
Code connections: positive terminal is M6 and negative terminal is M5
NO.:AF49-1013
•In-Tank applications only
TESTING PARAMETER:
TESTING VOLTAGE:13.5V

PRESSURE(PSI) 0 14.5 29 43.5 58 72.5 87

PRESSURE(BAR) 0 1 2 3 4 5 6
FLOW(GPH) 92.4 89.8 84.5 79.2 73.9 68.7 63.4
FLOW(LPH) 350 340 320 300 280 260 240
CURRENT(A) 8.2 8.6 9.9 11.3 12.7 14.2 15.5

PRESSURE-FLOW-CURRENT DIAGRAM

400 20

18
350
16
300
14
250
CURRENT(A)

12
FLOW(L/H)

200 10

8
150
6
100
4
50
2

0 0
0 1 2 3 4 5 6
PRESSURE(BAR)

FLOW(L/h) CURRENT(A)

aeroflowperformance.com 175
 EFI FUEL PUMPS

AF49-1015B
This Aeroflow Performance fuel pump delivers outstanding performance and
durability and is one of the most popular pumps on the market for performance
and racing applications. This fuel pump is almost identical the AF49-1015 but
has a 12.7mm (1/2”) barb moulded into the base of the fuel pump for the inlet.
The Fuel pump features a pressure relief valve & check valve that is built into
the top outlet of the fuel pump. While producing 300LPH (79.25GPH) of fuel
flow and operating at 72.5PSI (4.99BAR). With this fuel pump, you will be able
to support 675 horsepower.
•Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric AF49-1012
properties of Alcohol fuel like E85, fuel pump service life will be reduced and
filter maintenance must be increased. The Aeroflow Performance 255LPH fuel pump is a universal style pump
•12.7mm (1/2”) Barb Inlet intended to be installed in the fuel tank only. It is designed to replace the factory
•M12 x 1.50mm Outlet fuel pump in order to maximize fuel flow for high boost applications, where
•Body Length is 181mm (7-1/8”) the factory injector pulse duration is substantially increased or where larger
•Diameter is 60mm (2-23/64”) injectors are being utilized to service performance upgrades that demand
•Electrical connections: positive terminal is M6 and negative terminal is M5 more fuel than what the factory pump can deliver. It flows more than 255LPH
(67GPH) at 40psi (2.75BAR) and it is ideal for up to 500hp. This pump is
ideal for applications requiring more flow while retaining the factory lines and
mounting provisions available in the Original Equipment (O.E.) configuration.
FUEL SYSTEMS & EFI ACCESSORIES

This pump will plug in to the factory OE electrical connector and use the factory
OE screen filter. A new screen filter is included.
•Compact 125mm (4-59/64”) body length and 38mm (1-31/64”) diameter for OE
Fitment
•Designed for in-tank use only
•Outlet barb is 8mm or 5/16”
•Designed for in-tank use only
•Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric
properties of Alcohol fuel like E85, fuel pump service life will be reduced and
filter maintenance must be increased.

176 aeroflowperformance.com
 EFI FUEL PUMPS

AF49-1040
What sets the 325LPH fuel pump apart is its superior flow throughout a wide
pressure range. Compared to other aftermarket pumps, the 325 boasts a
significant increase in performance, flowing more than 325LPH (85GPH) at 40
psi (2.75BAR). This pump is ideal for applications requiring more flow while
retaining the factory lines and mounting provisions available in the Original
Equipment (O.E.) configuration in many late model EFI model vehicles (
2004 on ) such as Holden, Toyota, Nissan, Subaru, Mazda, Honda, Ford and
Mitsubishi. The 325 is also perfect for use as a replacement fuel pump for AF49-1041
applications that require more flow to support forced air power adders such
as turbo and superchargers. This pump will plug in to the factory OE electrical
Code NO.:AF49-1041
connector and use the factory OE screen filter. The 340LPH electric fuel pump is perfect for use as a replacement fuel
•Compact 125mm (4-59/64”) body length and 40mm (1-9/16”) diameter for OE pump for applications that require more flow to support forced air power
Fitment adders such as turbo and superchargers. Compact 40mm (1-9/16”) body
TESTING PARAMETER:
•Designed for in-tank use only diameter for universal fitment (Please note that this is an aftermarket fuel
TESTING VOLTAGE:13.5V Code
pump,NO.:AF49-1040
and some modifications may be required to get it to fit). It flows up to
•Outlet barb is 9.25mm or 3/8”
TESTING LIQUID:test liquid
•Inlet hole is 11mm or 7/16” 340LPH (89.8LPH) @ 43 psi (2.96BAR) and is quiet, durable and features
•Designed for in-tank use only a reliable turbine impeller. Includes universal filter sock & wiring pigtail

FUEL SYSTEMS & EFI ACCESSORIES

TESTING
•Can bePARAMETER:
used in pulse modulated applications.
•Can be used in pulse modulated
PRESSURE(MPA) 0 1 applications.
2 3 4 5 6 TESTING VOLTAGE:13.5V
•Compatible
FLOW(LPH) with Unleaded,E85
400 and Methanol
340 320 300Fuels
280( Due 250to the
210dielectric •Internal check valve
TESTING LIQUID:test liquid
properties of Alcohol fuel11like E85,
CURRENT(A) 13 fuel14pump 15service
16.3life 18
will be 19
reduced and •Designed for in-tank use only
filter maintenance must be increased. •Outlet barb is 9.25mm or 3/8”
•Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric
PRESSURE(MPA) 0 1 2 3 4 5 6
properties of Alcohol fuel like E85, fuel pump service life will be reduced
PRESSURE-FLOW-CURRENT DIAGRAM FLOW(LPH) 420 385 375 330 300 260 200
and filter maintenance must be increased.
CURRENT(A) 8 9 10 11 13 14.8 16.2
400 20

18
350
16 PRESSURE-FLOW-CURRENT DIAGRAM
300
14
250 425 20
CURRENT(A)

12
FLOW(L/H)

18
200 10 400
16
8 375
150
6 14
100 350
CURRENT(A)
4 12
FLOW(L/H)

50 325 10
2

0 0 8
300
      
6
PRESSURE(BAR) 275
4
)/2: /K  &855(17 $ 
250 2

200 0
      
PRESSURE(BAR)

)/2: /K  &855(17 $ 

Replacement screens for AF49-1041

AF59-1042 Large 90mm (3-35/64”) x 40mm (1-37/64”) replacement screen

AF59-1042

aeroflowperformance.com 177
 EFI FUEL PUMPS

AF49-1057
AF49-1042 The Aeroflow Performance 525LPH E85 Hi-flow in-tank efi fuel pump is our
highest flowing in-tank fuel pumps available from our range to date.
The Aeroflow Performance 450LPH E85 Hi-flow in-tank efi fuel pump is For such a compact and small design this fuel pump is capable of flowing
an extremely popular item which offers outstanding performance whilst 525LPH (138.7GPH) @ 29PSI (1.99BAR). With such a small and compact
retaining a quiet operation. The compact and small 40mm (1-9/16”) design it will fit in most O.E.M modern fuel tanks and surge tanks. (Please
diameter designed fuel pump is capable of flowing 450LPH (118GPH) @ note that this is an aftermarket fuel pump, and some modifications may be
30PSI(2.06BAR) with 13.5volts. With such a small and compact design it required to get it to fit). The internal design of this fuel pump is extremely
will fit in most O.E.M modern fuel tanks and surge tanks. (Please note that quiet in operation compared to the older style fuel pumps. It is compatible
this is an aftermarket fuel pump, and some modifications may be required with all fuels such as pump fuel, all types of race fuel and E85. Horsepower
to get it to fit). It is compatible with all fuels such as pump fuel, all types capabilities? This fuel pump can support over 850hp on E85 with just
of race fuel and E85 and is rated for 750HP on a single pump. Included one single fuel pump. Included with this Aeroflow Performance fuel pump
with this Aeroflow Performance fuel pump are a new filter inlet sock, wiring are a new filter inlet sock, wiring pigtail, one small length of rubber hose
pigtail, one small length of rubber hose (submersible in all fuel types), two (submersible in all fuel types), two clamps to suit rubber hose and two
clamps to suit rubber hose and two straight crimp connectors. Attached to straight crimp connectors. Attached to the pump is a 9.6mm (3/8”) barb.
the pump is a 9.6mm (3/8”) barb. •Can be used in pulse modulated applications.
•Can be used in pulse modulated applications. •Internal check valve
•Internal check valve •Designed for in-tank use only
•Designed for in-tank use only •Outlet barb is 9.25mm or 3/8”
FUEL SYSTEMS & EFI ACCESSORIES

•Outlet barb is 9.25mm or 3/8” •Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric
•Compatible with Unleaded,E85 and Methanol Fuels ( Due to the dielectric properties of Alcohol fuel like E85, fuel pump service life will be reduced and
properties of Alcohol fuel like E85, fuel pump service life will be reduced
Code NO.:AF49-1042 filter maintenance must be increased.
Code NO.:AF49-1057
and filter maintenance must be increased.

PRESSURE-FLOW-CURRENT DIAGRAM PRESSURE-FLOW-CURRENT DIAGRAM

650 20
450 20
600 18
18
400
16
16 550
350 14
14 500

CURRENT(A)
12
FLOW(L/H)

300
CURRENT(A)

12
FLOW(L/H)

450 10
250 10
400 8
8
200 6
350
6 4
150
4 300
2
100
2 250 0
      
0 0
PRESSURE(BAR)
       
PRESSURE(BAR) (.19 .J  %744'06 # 

(.19 .J  %744'06 # 

AUDI / VW FUEL PUMP

The Aeroflow Performance 265 LPH Hi-flow in-tank efi fuel pump is
designed to fit in O.E.M modern European fuel tanks in the Audi and
VW models that are all-wheel-drive and front wheel drive configurations.
Models include VW MK4 / MK5 R32 Golf as well as AUDI MK1 S3, MK2
S3, MK1 and MK2 but can also be used as a replacement low pressure
fuel pump on the 2.0TSI and 2.0FSI engine equipped cars. This fuel
pump maintains the same pick up points including the compact outlet 90
degree angle barb end cap for all wheel drive models and the buckets
fuel level location. No wiring is needed when fitting this pump as the
connector matches factory wiring in Audi and VW. The quiet and reliable
turbine impeller allows this fuel pump is to flow 265LPH (70GPH)@ 40PSI
(2.75BAR). It is compatible with all fuels such as pump fuel and E85.

Part No Description
AF49-1047 In-tank to suit all wheel drive Audi and Volkswagen.
265 LPH @ 40 PSI. High performance replacement

AF49-1062 In-tank to suit front wheel drive Audi and Volkswagen.

265 LPH @ 40 PSI. High performance replacement

178 aeroflowperformance.com
 FUEL PUMPS & ACCESSORIES

BARB to AN FLARE ADAPTERS

OE REPLACEMENT EFI PUMPS No welding...no clamps…no hassle with this unique O-ring design.
This revolutionary fitting allows you to convert any barb plastic or metal over
Part No Description to the ever popular range of AN style fittings in our inventory. It comes in
several popular sizes to suit all your needs including 5/16”, 3/8”, 1/2” and
AF49-1021 In-tank to suit Holden Commodore VN-VS
15mm barb sizes which accommodates a variety of electric oil and fuel
Standard replacement
pumps.

Barb to AN Blue Black Silver

5/16” 7.93mm to -6 AF741-06-05 AF741-06-05BLK AF741-06-05S
3/8” 9.52mm to -6 AF741-06-06 AF741-06-06BLK AF741-06-06S
5/16” 7.93mm to -8 AF741-08-05 AF741-08-05BLK AF741-08-05S

FUEL SYSTEMS & EFI ACCESSORIES

3/8” 9.52mm to -8 AF741-08-06 AF741-08-06BLK AF741-08-06S
1/2” 12.7mm to -8 AF741-08-08 AF741-08-08BLK AF741-08-08S
15mm to -8 AF741-08-09 AF741-08-09BLK AF741-08-09S
1/2” 12.7mm to -10 AF741-10-08 AF741-10-08BLK AF741-10-08S
15mm to -10 AF741-10-09 AF741-10-09BLK AF741-10-09S
5/8” 15.9mm to -10 AF741-10-10 AF741-10-10BLK AF741-10-10S
3/4” 19.1mm to -10 AF741-10-12 AF741-10-12BLK AF741-10-12S
5/8” 15.9mm to -12 AF741-12-10 AF741-12-10BLK AF741-12-10S
3/4” 19.1mm to -12 AF741-12-12 AF741-12-12BLK AF741-12-12S

Part No Description
AF49-1022 In-tank to suit Ford Falcon EA-EL Standard replacement

HIGH PRESSURE BIO-DIESEL PUMP

Great for use with diesel fuel systems. Features 7.93mm (5/16”) male EFI
style inlet and outlet fitting.

Part No Description
AF49-1032 High pressure in-line diesel pump
IN-TANK FUEL HOSE KIT
Most rubber fuel lines are only designed to handle fuel on the interior of the
hose, which can be damaged if the exterior is exposed to fuel especially alco-
hol based fuels. The Aeroflow Performance in-tank hose kits are capable of
handling multiple types of fuels from E85 to diesel in fully-immersed, mobile
and stationary applications. Engineered to be fully submersible for extended
periods of time due to the material being Teflon.

Part No Description
AF49-1046 9.5mm (3/8”) Diameter. 240mm (9-7/16”) length of hose
and 2 x hose clamps
AF49-1060 7.9mm (5/16”) Diameter. 240mm (9-7/16”) lenth of hose
and 2 x hose clamps

AF49-1046-1M 9.5mm (3/8”) Diameter. 1m (3ft 9/32”) length

AF49-1060-1M 7.9mm (5/16”) Diameter. 1m (3ft 9/32”) length

aeroflowperformance.com 179
 FUEL PUMPS & ACCESSORIES

EFI FUEL PUMP ACCESSORIES

AF49-1034BLK

AF49-1020S

90o FUEL PUMP BANJO KIT

Aeroflow offer 7.93mm (5/16”) barb,-6AN and -8AN banjo adapter kits that
will fit directly onto the factory one way check valves supplied with the
Aeroflow and Bosch style EFI fuel pumps. Manufactured from 6061-T6 EFI FUEL PUMP CHECK VALVE
aluminium and available in blue, black and silver anodised finishes. Kit This CNC’d check valve screws directly into Aeroflow or Bosch EFI fuel
comes complete with banjo,washers and cap. pumps to hold line pressure and extend the life of the pump.

Outlet Blue Black Silver

AN Blue Black Silver
8mm (5/16) barb AF49-1020 AF49-1020BLK AF49-1020S
-6 (M12x1.5) AF615-06 AF615-06BLK AF615-06S
-6AN AF49-1034 AF49-1034BLK AF49-1034S
-8 (M12x1.5) AF615-08 AF615-08BLK AF615-08S
-8AN AF49-1035 AF49-1035BLK AF49-1035S
Supplied with Buna N O-ring and EPR O-ring
for use with Nitro blended fuels

FUEL PUMP
FUEL SYSTEMS & EFI ACCESSORIES

INLET SCREEN
Aeroflow’s filter sock is designed to be used with the AF49-1014 or
the bosch 044 high performance fuel pumps. This high flow 60 micron
synthetic filter screen features an internal support to keep the filter from
sucking closed and reducing fuel flow. The kit is supplied with an anodised
black M18 x 1.5 adapter that is safe for use with corrosive fuels and
seals with a supplied nylon washer. Screen size is 135mm (5-5/16”) long
by 57mm (2-1/4”) wide and gives you reassurance on fuel pump life, a
perfect addition when installing fuel pumps in-tank.
AF49-1037

EFI FUEL PUMP SILENCER

This solid mounted rubber silencer can be used with externally mounted
Aeroflow and Bosch efi fuel pumps for noise reduction. Suits externally
mounted 60mm fuel pumps such as AF49-1015, AF49-1015B and
AF49-1014.

Part No Description
AF49-1019 Fuel pump silencer kit

HOLDEN VE / VF FUEL PUMP MODULE

Aeroflow Performance is proud to release this direct fit bolt in in-tank fuel
module for the Holden Commodore VE-VF. With these modern Commodores
being tuned to amazing power levels thanks to E85 this module is capable
of holding up to 3 x 40mm (1-37/64”) diameter fuel pumps at a time. This will
perfectly support power levels from standard all the way to 1800hp while still
retaining the factory fuel tank with all standard seals, lock rings and internal
crossover lines. It also allows you to reuse the OEM fuel level sender for
complete compatibility with factory electronics and features a hermetic wire
pass through for absolutely no chance for fuel smells/leaks into the cabin while
still upgrading to the necessary larger wires.
•Suits Holden Commodore VE-VF models
•Accepts single, twin or triple 40mm fuel pumps such as AF49-1041 ,
AF49-1042 , AF49-1057 sold separately.
•E85 compatible.
•-8ORB feed and return fittings.
• After market fuel regulator, custom fuel pump wiring and fuel lines required for
installation these parts are NOT INCLUDED.

Part No Description
AF64-4055 Replacement VE / VF multi fuel pump hanger

180 aeroflowperformance.com
 FUEL PUMP ACCESSORIES

EFI FUEL PUMP BRACKETS

Suits Aeroflow and Bosch EFI fuel pumps
Single pump bracket bolt hole ø to ø is 113mm (4-7/16”)
Dual pump bracket bolt hole ø to ø is 181.5mm (7-9/64”)

Pumps Blue Red Black Silver

Single AF64-2000 AF64-2000R AF64-2000BLK AF64-2000S
Dual AF64-2015 AF64-2015R AF64-2015BLK AF64-2015S
Replacement mounting Rubber & bolts
(Single Pump Bracket) AF59-2000 FUEL COOLER TANK
(Dual Pump Bracket) AF59-2015
Aeroflow’s fluid cool can is a smart and effective way to easily cool down any
fluid system utilising up to -8AN (1/2”) lines. The tank features -8ORB female
Note: - Single bracket features dual rubber inserts to suit both 52mm
ports with a large 76.3mm (3”) screw-on cap for ease of filling tank with ice.
(2-3/64”) and 60mm (2-23/64”) diameter pumps.The dual bracket includes
The tank is manufactured from 5051 Aluminium sheet metal and has mandrel
only the larger 60mm (2-23/64”) pump rubbers. Single bracket can also be
bent ½” tubing so there is no restrictions in flow. Tank can be used in many
used as mounting for 66.67mm (2-5/8”) gauges.
applications for example cooling your fuel system down for more power or

FUEL SYSTEMS & EFI ACCESSORIES

simply trying to keep oil temps down in extreme off road applications. Tank is
available in polished or black anodised and comes with mounting feet and a
drain port. Height 237mm (9-23/64”), Length & Width both 132mm (5-3/16”).

Part No Colour Description

AF77-4054 Polished Fuel cooler tank
AF77-4054BLK Black Fuel cooler tank

EFI BILLET FUEL PUMP BRACKETS Has provision for 50mm (1-31/32”) filter
bracket.Filter & bracket NOT INCLUDED
Aeroflow Performance have designed a 6061-T6 Billet single and dual
pump bracket that can be used with a wide range of fuel pump’s, as well as
Aeroflow’s famous 1014 EFI pump and Bosch pumps. Can also double up as TRIPLE EFI PUMP COMPACT SURGE TANK
a 66.68mm (2-5/8”) gauge holder when silencer rubbers are removed.
These compact surge tanks are designed to work with our AF49-1041,
AF49-1042 & AF49-1057 pumps, or any 40mm (1-37/64) diameter pump.
Part No Colour Description These smart tanks are designed to have the fuel pumps submerged in fuel
AF64-2901 Blue Single fuel pump bracket for a quieter operation and longer life of the fuel pump. These tanks features
AF64-2901R Red Single fuel pump bracket -10ORB feed & -8ORB return/overflow ports for a positive seal allowing many
AF64-2901S Silver Single fuel pump bracket options to plumb the fuel system and are 7L (1.85 Gal) in capacity. We offer
AF64-2901P Polished Single fuel pump bracket the tank in either polished or black anodised. The black anodised finish is
AF64-2901BLK Black Single fuel pump bracket recommended for use with corrosive fuels such as Ethanol and Methanol.
Length 185mm (7-1/4”) x Width 185mm (7-1/4”) x Height 260mm (10-1/4”) 7L
AF64-2902 Blue Dual fuel pump bracket (1.85 Gal) capacity.
AF64-2902R Red Dual fuel pump bracket NOTE: Requires upgrade to wiring / fuses and installation of relay
AF64-2902S Silver Dual fuel pump bracket
AF64-2902P Polished Dual fuel pump bracket
AF64-2902BLK Black Dual fuel pump bracket Part No Colour Description
AF77-4053 Polished Triple pump surge tank
AF77-4053BLK Black Triple pump surge tank
AF59-2070 Replacement viton rubber gasket
AF59-4054 Replacement bolts & teflon washers

aeroflowperformance.com 181
 SURGE TANKS

As used in Y-piece AF939-08-10

single pump and dual pump bracket
applications AF64-2902 also
available seperately.

check valves
included

2.5L (67.6oz) SINGLE OUTLET

SURGE TANKS
Dimensions: 114mm (4-1/2”) round & 273mm (10-3/4”) tall
3 x 9.52mm (3/8”) barbs, 1 x 12.7mm (1/2”) barbs and
3 x 6AN, 1 x 8AN fittings included.

Part No Finish Description

AF49-1016 Polished 2.5 L (67.6oz) spun alloy surge tank
Fuel pumps & pump inlet
AF49-1016BLK Black 2.5 L (67.6oz) spun alloy surge tank
fittings NOT included
AF59-1016S Silver Replacement fitting kit
AF59-1016BLK Black Replacement fitting kit
DUAL EFI PUMP SURGE TANK KITS
Removable ORB AN and Barb fittings included.
The 3.1L (.8 Gal) surge tank has 6 x -8 ORB ports for multi configuration.
The kit contains surge tank, dual EFI fuel pump mounting bracket and billet
Y-Block (2 x -8, 1 x -10 ORB) •Check valves included •Robotically TIG welded
•All tanks are professionally polished. Also available black anodised inside
and out for use with alcohol and ethanol. •ORB ports for easy fitment and
positive seal. Suits AF49-1014 or any 60mm (2-3/8”) fuel pump.
FUEL SYSTEMS & EFI ACCESSORIES

NOTE: Requires upgrade to wiring / fuses and installation of relay

Part No Colour Size - LxWxH

AF77-2044 Polished 127mm (5”)x127mm (5”)x210mm (8.25”)
As used in
dual pump AF77-2044BLK Black 127mm (5”)x127mm (5”)x210mm (8.25”)
applications

2.5L (67.6oz) DUAL OUTLET

SURGE TANKS
AF907-08BLK
Dimensions: 114mm (4-1/2”) round & 273mm (10-3/4”) tall
DUAL BOTTOM OUTLET for twin pump setups all ports are female -8 ORB

Part No Finish Description

AF64-2901BLK
AF49-1024 Polished 2.5 L (67.6oz) surge tank DUAL OUTLET
AF49-1024BLK Black 2.5 L (67.6oz) surge tank DUAL OUTLET

AF939-08-10BLK
AF64-2902BLK

EFI PUMP ACCESSORIES

Part No Colour Description
Y Blocks
AF939-08-10P Polished Billet Y piece
DUAL EFI PUMP UNDER-CAR SURGE TANK AF939-08-10BLK Black Billet Y piece
The 4.75L (1.25 Gal) surge tank has 6 x -8 ORB ports for multi configuration. AF939-08-10S Silver Billet Y piece
The tank comes with dual EFI mounting bracket and 2 x AF907-08 adapters. AF939-08-10 Blue Billet Y piece
Also available black anodised inside and out for use with alcohol and ethanol.
• ORB ports for easy fitment and positive seal. Tank to pump fitting.
• Suits AF49-1014 or any 60mm (2-3/8”) fuel pump. AF907-08 Blue -8 ORB to -8 female
NOTE: Requires upgrade to wiring / fuses and installation of relay AF907-08BLK Black -8 ORB to -8 female
AF907-08S Silver -8 ORB to -8 female
Part No Colour Size - LxWxH Litres
AF77-1044 Polished 390mm(15”) x 150mm(5.9”) x 162mm(6.3”) 4.75L
AF77-1044BLK Black 390mm(15”) x 150mm(5.9”) x 162mm(6.3”) 4.75L

182 aeroflowperformance.com
 SURGE TANKS

Example only no pumps

or fittings included

DUAL EFI PUMP COMPACT SURGE TANK

These compact surge tanks are designed to work with our AF49-1014 pumps,
or 60mm (2-3/8”) pumps as well as the Bosch 044 fuel pumps. These smart
little tanks are designed to have the fuel pumps submerged in fuel for a
quieter operation and longer life of the fuel pump. These tanks feature -8ORB
ports for a positive seal allowing many options to plumb the fuel system. Fits
AF939-08-10 Y-piece to merge pumps to a female -10ORB port. The tank can
be mounted in the engine bay to reduce the work and cost to route the fuel
system from the rear of the vehicle. We offer the tank in either polished or
shiny black anodised. The black anodised finish is recommended for use with
corrosive fuels such as Ethanol and Methanol. Includes block-off plate
for use as single pump tank with option to upgrade to dual pumps.
Length 180mm (7”) x Width 115mm (4.5”) x Height 180mm (7”)
3.8L (1Gal) capacity measured with 2 x AF49-1014 fuel pumps fitted.

FUEL SYSTEMS & EFI ACCESSORIES

NOTE: Requires upgrade to wiring / fuses and installation of relay

Part No Colour Description

AF77-3244 Polished Dual EFI pump surge tank
AF77-3244BLK Black Dual EFI pump surge tank
AF77-4244 Polished Dual EFI pump under car surge tank
AF77-4244BLK Black Dual EFI pump under car surge tank
AF59-3144 Replacement 60mm o-ring

Pump sold
seperately

Example
only no
pumps
or fittings
included
SINGLE EFI PUMP COMPACT SURGE TANK
Aeroflow Performance’s single compact surge tanks are ideal for fuel
systems who wish to use the very popular 40mm (1-9/16”) diameter fuel
pumps in todays market. These smart little tanks are designed to have the
fuel pump submerged in fuel for quieter operation and longer life of the fuel
SINGLE EFI PUMP COMPACT SURGE TANK pump. Utilizing a billet single 40mm (1-9/16”)pump hanger with a -6an male
fitting for the feed, 3 x -8ORB female and two electrical bulkheads. Designed
These compact surge tanks are designed to work with our AF49-1014 pump, to work with Aeroflow Performance AF49-1041 , AF49-1042 , AF49-1057
or 60mm (2-3/8”) pump as well as the Bosch 044 fuel pump. These smart high flow fuel pumps or any other 40mm (1-9/16”) diameter fuel pumps. The
little tanks are designed to have the fuel pump submerged in fuel for a quieter tank can be mounted in the engine bay to reduce the work and cost to route
operation and longer life of the fuel pump. These tanks feature -8ORB ports from the rear of a vehicle. Both tanks are available in either polished or black
for a positive seal allowing many options to plumb the fuel system. The tank anodised finish, the black anodised finish is what we recommend for use with
can be mounted in the engine bay to reduce the work and cost to route the corrosive fuels such as Ethanol and Methanol.
fuel system from the rear of the vehicle. We offer the tank in either polished Length 130mm (5”) x Width 130mm (5”) x Height 160mm (6.3”)
or shiny black anodised. The black anodised finish is recommended for use 2.5L (84.5oz) capacity.
with corrosive fuels such as Ethanol and Methanol. 164mm (6-29/64”) centres mounting bracket bolt hole centre to centre
Length 130mm (5”) x Width 130mm (5”) x Height 160mm (6.3”) NOTE: Requires upgrade to wiring / fuses and installation of relay
2.3L (87.6oz) capacity measured with AF49-1014 fuel pump fitted.
NOTE: Requires upgrade to wiring / fuses and installation of relay Part No Colour Description
AF77-4055 Polished Single pump surge tank
Part No Colour Description AF77-4055BLK Black Single pump surge tank
AF59-4055 Replacement viton gasket
AF77-3144 Polished Single pump surge tank
AF77-3144BLK Black Single pump surge tank
AF59-3144 Replacement 60mm o-ring

aeroflowperformance.com 183
 EFI REGULATORS

BILLET 3 PORT EFI REGULATORS

Aeroflow’s Compact Billet 3 port EFI regulators is designed for applications
producing up to 596 KW (800HP) were space is at a premium. Made from
billet 6061 T6 aluminium these regulators are an ideal upgrade for the EFI fuel
systems. Ethanol, methanol & unleaded compatible. These regulators have 3
x -6 ORB Ports and also include 1 x 1/8” NPT Port. Adjustable from 2 - 6 BAR
(30-90 psi). Available in polished & black finishes and come with mounting
hardware.
Total Height is 85mm (3-11/32”), diameter 45mm (1-49/64).
BILLET 4 PORT EFI REGULATORS.
Comes with 5mm (3/16) boost reference barb. The Aeroflow Performance 4 port 1500KW (2000HP) EFI fuel regulator is
Centre to centre for mounting holes is 64.5mm (2-17/32) designed to provide a stable platform for the high demands of all current fuel
systems. With fuels such as E85, Methanol and alcohol based fuels this fuel
Part No Outlets Colour regulator is an ideal upgrade to maintain a steady flow rate with 4 x -8ORB inlet
ports and 1 x 1/8” NPT for a gauge or pressure sensor to keep a watchful eye
AF66-2058 -6 ORB Polished
on fuel pressures. All whilst being completely rebuildable and user-serviceable.
FUEL SYSTEMS & EFI ACCESSORIES

AF66-2058BLK -6 ORB Black

• Adjustment from 35 psi to 85 psi (2 to 6 BAR)
Replacement diaphragm and spring AF59-3058
•4x -8ORB inlets
•1x -8ORB return
•1:1 Boost Reference

For Carb Part No Outlets Colour

Regulators s
e
page 171 e AF66-2060
AF66-2060BLK
-8 ORB
-8 ORB
Polished
Black
Replacement diaphragm and spring AF59-2064

Comes
standard with
carburettor
Spring in-
stalled.

Inlet Inlet

Return Return

CARB & EFI FUEL PRESSURE

REGULATOR (Return style)
These fuel regulators allow carburettor fuel systems to be converted to EFI
BILLET 3 PORT EFI REGULATORS. high pressure fuel systems while still utilising the same regulator by easily
changing the internal spring. With a carburettor pressure spring installed out
Made from billet 6061-T6 aluminium these regulators are an ideal upgrade for of the box which allows adjustability of 3 - 20 psi (0.26 - 1.37 BAR), simply
the EFI fuel systems. Will support up to 895KW (1200HP). Ethanol & methanol unscrew the top half of the fuel regulator and install the efi spring which
& unleaded compatible. 3 x -6 ORB ports. Also has a 1/8” NPT port. Adjustment will now allow adjustability of 20-60 psi (1.37 - 4.13 BAR). Being a compact
from 2-8 BAR (30- 120 PSI). Available in polished & black finishes. Comes with design with height of only 115mm (4-33/64”), diameter of 53mm (2-5/64”)
chrome mounting bracket and screws. and can be installed anywhere with the supplied billet mounting bracket.
Total Height is 108mm (4-1/4”), diameter 61mm (2-13/32). Featuring 3 x -8 orb ports and a 1/8 npt port up front it is also available in
Comes with 5mm (3/16) boost reference barb. both chrome and black anodized finishes.

Part No Outlets Colour Part No Ports Colour

AF66-2055 -6 ORB Polished AF66-2059 2 x -8ORB inlets 1 x -8ORB return Polished
AF66-2055BLK -6 ORB Black AF66-2059BLK 2 x -8ORB inlets 1 x -8ORB return Black
Replacement diaphragm and spring AF59-2055 Replacement diaphragm and spring AF59-2079

184 aeroflowperformance.com
 EFI ACCESSORIES

PUSH-IN TO BARB EFI FUEL FITTINGS

BARB EFI FUEL PUMP ADAPTERS
Part No Description
Thread Barb Blue Black Silver AF810-05 7.93mm (5/16”) Barb to male hard tube Blue
M10 x 1.0mm 7.93mm (5/16”) AF745-01 AF745-01 BLK AF745-01S AF810-05BLK 7.93mm (5/16”) Barb to male hard tube Black
M10 x 1.0mm 9.52mm (3/8”) AF745-02 AF745-02 BLK AF745-02S AF810-05S 7.93mm (5/16”) Barb to male hard tube Silver
M12 x 1.5mm 7.93mm (5/16”) AF731-01 AF731-01BLK AF731-01S AF810-06 9.52mm (3/8”) Barb to male hard tube Blue
M12 x 1.5mm 9.52mm (3/8”) AF731-02 AF731-02BLK AF731-02S AF810-06BLK 9.52mm (3/8”) Barb to male hard tube Black
M14 x 1.5mm 7.93mm (5/16”) AF746-01 AF746-01BLK AF746-01S AF810-06S 9.52mm (3/8”) Barb to male hard tube Silver
M14 x 1.5mm 9.52mm (3/8”) AF746-02 AF746-02BLK AF746-02S Note: Lubricate O-rings before installation
M14 x 1.5mm 12.7mm (1/2”) AF746-03 AF746-03BLK AF746-03S
M14 x 1.5mm 15.8mm (5/8”) AF746-04 AF746-04BLK AF746-04S
M18 x 1.5mm 9.5mm (3/8”) AF734-00 AF734-00BLK AF734-00S
M18 x 1.5mm 12.7mm (1/2”) AF734-01 AF734-01BLK AF734-01S
M18 x 1.5mm 19mm (3/4”) AF734-02 AF734-02BLK AF734-02S

FUEL SYSTEMS & EFI ACCESSORIES

PUSH-IN EFI FUEL FITTINGS
Part No Description
AN EFI FUEL PUMP ADAPTERS These push-in EFI fittings suit most late model cars standard fuel lines.
AF817-01 -6 push-in to 7.93mm (5/16”) male hard tube Blue
Thread AN Blue Black Silver AF817-01BLK -6 push-in to 7.93mm (5/16”) male hard tube Black
Inlet Fittings AF817-01S -6 push-in to 7.93mm (5/16”)male hard tube Silver
M14 x 1.5mm -6 AF732-06 AF732-06BLK AF732-06S AF817-02 -6 push-in to 9.52mm (3/8”) male hard tube Blue
M14 x 1.5mm -8 AF732-08 AF732-08BLK AF732-08S AF817-02BLK -6 push-in to 9.52mm (3/8”) male hard tube Black
M14 x 1.5mm -10 AF732-10 AF732-10BLK AF732-10S AF817-02S -6 push-in to 9.52mm (3/8”) male hard tube Silver
M18 x 1.5mm -6 AF734-06 AF734-06BLK AF734-06S
M18 x 1.5mm -8 AF734-08 AF734-08BLK AF734-08S AF817-03 -8 push-in to 9.52mm (3/8”) male hard tube Blue
M18 x 1.5mm -10 AF734-10 AF734-10BLK AF734-10S AF817-03BLK -8 push-in to 9.52mm (3/8”)male hard tube Black
Outlet Fittings AF817-03S -8 push-in to 9.52mm (3/8”) male hard tube Silver
M12 x 1.5mm -6 AF731-06 AF731-06BLK AF731-06S
M12 x 1.5mm -8 AF731-08 AF731-08BLK AF731-08S Note: Lubricate O-rings before installation

PUSH-ON EFI FUEL FITTINGS

to ORB FEMALE 90o PUSH-ON EFI FUEL FITTINGS
Part No Description to ORB MALE
These push-in EFI fittings suit most late model cars standard fuel lines. Part No Description
AF908-06-01 7.93mm (5/16”) to -6ORB Blue
AF908-06-01BLK 7.93mm (5/16”) to -6ORB Black These 90o push-in EFI fittings suit most late model cars standard fuel lines.
AF908-06-01S 7.93mm (5/16”) to -6ORB Silver
AF812-08-05 7.93mm (5/16”) to -8AN Blue
AF812-08-05BLK 7.93mm (5/16”) to -8AN Black
AF908-08-02 9.52mm (3/8”) to -8ORB Blue
AF812-08-05S 7.93mm (5/16”) to -8AN Silver
AF908-08-02BLK 9.52mm (3/8”) to -8ORB Black
AF908-08-02S 9.52mm (3/8”) to -8ORB Silver
AF812-08-06 9.52mm (3/8”)hose to -8AN Blue
Note: Lubricate O-rings before installation AF812-08-06BLK 9.52mm (3/8”)hose to -8AN Black
AF812-08-06S 9.52mm (3/8”) hose to -8AN Silver

aeroflowperformance.com 185
 EFI ACCESSORIES

AF808-01BLK
AF905-01BLK

90o PUSH-ON EFI FUEL FITTINGS

Part No Description
These 90o push-in EFI fittings suit most late model cars standard fuel lines.
AF803-01 7.93mm (5/16”) return side to -6AN Blue
AF803-01BLK 7.93mm (5/16”) return side to -6AN Black
AF803-01S 7.93mm (5/16”) return side to -6AN Silver

AF803-02 9.52mm (3/8”)hose pressure side to -6AN Blue

AF803-02BLK 9.52mm (3/8”)hose pressure side to -6AN Black
AF803-02S 9.52mm (3/8”) hose pressure side to -6AN Silver

AF803-03 9.52mm (3/8”) hose pressure side to -8AN Blue

AF803-03BLK 9.52mm (3/8”) hose pressure side to -8AN Black
AF803-03S 9.52mm (3/8”) hose pressure side to -8AN Silver
FUEL SYSTEMS & EFI ACCESSORIES

PUSH-ON EFI FUEL FITTINGS

with ORB PORT
This fitting features a 1/8” NPT port and a -6ORB or -8ORB port.

Part No Description
These push-in EFI fittings suit most late model cars standard fuel lines.
AF905-01 7.93mm (5/16”) female to 5/16” male with -6ORB port Blue
AF905-01BLK 7.93mm (5/16”) female to 5/16” male with -6ORB port Black
AF905-01S 7.93mm (5/16”) female to 5/16” male with -6ORB port Silver

AF905-02 9.52mm (3/8”)female to 3/8” male with -8ORB port Blue

AF905-02BLK 9.52mm (3/8”)female to 3/8” male with -8ORB port Black
AF905-02S 9.52mm (3/8”)female to 3/8” male with -8ORB port Silver

PUSH-ON EFI FUEL FITTINGS Note: Lubricate O-rings before installation

Part No Description
These push-in EFI fittings suit most late model cars standard fuel lines.
AF808-01 7.93mm (5/16”) to -6AN Blue
AF808-01BLK 7.93mm (5/16”) to -6AN Black
AF808-01S 7.93mm (5/16”) to -6AN Silver

AF808-02 9.52mm (3/8”) to -6AN Blue

AF808-02BLK 9.52mm (3/8”) to -6AN Black
AF808-02S 9.52mm (3/8”) to -6AN Silver

AF808-03 LS & LT 3/8” hose to -8AN Blue

AF808-03BLK LS & LT 3/8” hose to -8AN Black
AF808-03S LS & LT 3/8” hose to -8AN Silver
PUSH ON EFI FUEL FITTING TO
AF808-06-08
AF808-06-08BLK
LS & LT 1/2” hose to -6AN Blue
LS & LT 1/2” hose to -6AN Black
ORB MALE
AF808-06-08S LS & LT 1/2” hose to -6AN Silver This male 5/16” ( 7.95mm ) efi quick connect fitting to male -8ORB
is designed specifically for the Honda K20 / K24 series engines to
AF808-04 LS & LT 1/2” hose to -8AN Blue connect the factory OE hardline. A great idea when using a vehicle
AF808-04BLK LS & LT 1/2” hose to -8AN Black equipped with our k-series fuel rail ( AF64-2140 ).
AF808-04S LS & LT 1/2” hose to -8AN Silver
Part No Description
Note: Lubricate O-rings before installation
AF811-08-05BLK BLACK Honda fuel rail adapter

Note: Lubricate O-rings before installation

186 aeroflowperformance.com
 EFI ACCESSORIES

90o PUSH-ON TO BARB

OE STYLE EFI FUEL FITTINGS
EFI DISCONNECT TOOL Part No Description
This handy tool allows you to disconnect your factory EFI fitting without
damaging the plastic clips. They will work for both 7.93mm (5/16”) and 9.5mm These push-in EFI fittings suit most late model cars with standard fuel lines.
(3/8”) fuel line fittings. AF49-7002 90o 7.93mm (5/16”) push-on to 7.93mm (5/16”) male barb
AF49-7012 90o 9.65mm (3/8”) push-on to 9.65mm (3/8”) male barb
Part No Description Note: Lubricate O-rings before installation
AF98-2106 EFI disconnect tool

STRAIGHT PUSH-IN TO BARB

OE STYLE EFI FUEL FITTINGS
PUSH-ON TEE TO BARB
Part No Description
OE STYLE EFI FUEL FITTINGS
These push-in EFI fittings suit most late model cars with standard fuel lines.
AF49-7004 7.93mm (5/16”) push-in to 7.93mm (5/16”) male barb Part No Description
AF49-7014 9.65mm (3/8”) push-in to 9.65mm (3/8”) male barb
These push-in EFI fittings suit most late model cars with standard fuel lines.

FUEL SYSTEMS & EFI ACCESSORIES

Note: Lubricate O-rings before installation AF49-7003 7.93mm (5/16”)push-on to 7.93mm (5/16”) male barb with
7.93mm (5/16”) push-in on side
Note: Lubricate O-rings before installation

STRAIGHT PUSH-ON TO BARB

OE STYLE EFI FUEL FITTINGS
Part No Description
These push-in EFI fittings suit most late model cars with standard fuel lines.
AF49-7000 7.93mm (5/16”) push-on to 7.93mm (5/16”) male barb
AF49-7010 9.65mm (3/8”) push-on to 9.65mm (3/8”) male barb
AF49-7020 7.93mm (5/16”) push-on to 9.65mm (3/8”) male barb
AF49-7030 9.65mm (3/8”) push-on to 7.93mm (5/16”) male barb

Note: Lubricate O-rings before installation

45o PUSH-ON TO BARB

OE STYLE EFI FUEL FITTINGS
Part No Description
These push-in EFI fittings suit most late model cars with standard fuel lines.
AF49-7001 45o 7.93mm (5/16”) push-on to 7.93mm (5/16”) male barb
AF49-7011 45o 9.65mm (3/8”) push-on to 9.65mm (3/8”) male barb

Note: Lubricate O-rings before installation

aeroflowperformance.com 187
 THROTTLE BODIES

AF64-2070

AF64-2072

THROTTLE BODY ADAPTERS

Suits 90mm and 95mm throttle bodies. Will NOT suit 102mm Throttle
bodies.

AF64-2072BLK Part No Description

AF64-2087 Weld flange suit LS 90mm (3-7/32”) AF64-2072
AF64-2088 Adapts AF64-2072 to early 3 bolt LS manifolds.

BILLET CABLE THROTTLE BODIES

Aeroflow’s Billet throttle bodies are to suit the four bolt LS manifolds and
allows the use of your factory TPS and Idle control units.
The AF64-2070 is a 102mm (4”) version that requires the use of an adapter
FUEL SYSTEMS & EFI ACCESSORIES

plate or aftermarket manifold.

Size Aluminium Black Cable AF64-2136

95mm (3-19/64”) AF64-2072 AF64-2072BLK Manual

102mm (4”) AF64-2070 AF64-2070BLK Manual

AF49-2050

AF49-2051
AF64-2135

THROTTLE BODY ACCESSORIES

These replacement accessories ONLY SUIT THE 4 BARREL THROTTLE
BODIES. (NOT for use with LS throttle bodies)

Part No Description ELECTRONIC THROTTLE BODIES

AF49-2050 Replacement idle control unit, suits manual throttle bodies The Bosch Motorsport drive-by-wire ( DBW ) electronic throttle bodies
AF49-2051 Replacement throttle position sensor (TPS) are designed to control the fresh air delivery into the engine electronically
replacing the mechanical linkage from the accelerator pedal. This DBW setup
will require three things to make it work:
I. An accelerator pedal module AF64-2137 ( Sold Separately 0 280 755 051 )
II. A throttle valve that can be opened and closed by an electric motor ( DBW )
III. A powertrain or engine control module (PCM or ECM) either factory or
aftermarket
The DBW will work with all applications with flex-fuels, CNG and LPG if they
are injected in the air stream after the throttle body. The DBW is great for
custom applications when a large throttle body is required with both 74mm
(2-29/32”) and 82mm (3-7/32”) versions available for to suit various engine
capacities.
* Opening direction is counter clockwise
* Two redundant sensors control the throttle position
* DBW electronic throttle bodies have an idle air position
* Temperature range is -40oC to 140oC (-40oF to 284oF)
GM LS THROTTLE CABLE BRACKET * Can be connected directly to PCM/ECM units with ETC functionality
This Aeroflow Performance throttle body bracket is ideal for allowing * Supply voltage is 6 to 16 V
an easy install of the OE throttle cable to the throttle body. Designed to * Output signal I: 0 to 5 V for 0 to 90 degrees
suit aftermarket 90mm and 95mm 4 bolt throttle bodies sold separately. * Output signal II: 5 to 0 V for 0 to 90 degrees
This Bracket has allowance for throttle pedal adjustment and / or the
addition of a nitrous plate. Aeroflow BOSCH Description
Part No Part No
Part No Description
AF64-2136 0 280 750 473 Electronic Throttle Body (82mm bore)
AF64-2172 GM LS Throttle body bracket for accelerator cable. AF64-2135 0 280 750 474 Electronic Throttle Body (74mm bore)
AF49-2135 DBW plug and pins
188 aeroflowperformance.com
 THROTTLE BODIES

AF64-2139

AF64-2146 Note; See page 405 for

intercooler clamps

BILLET 4 BARREL THROTTLE BODIES

BOSCH DBW ADAPTERS Aeroflow’s throttle bodies are a true billet construction. The 1375CFM throttle
These handy adapters bolt to front of the popular Bosch 74mm and 82mm bodies utilize dual pattern flange (4150 & 4500) and includes the idle air
Electronic Throttle Body (AF64-2135, AF64-2136) and allows an Aeroflow control valve (IAC) and throttle position sensor (TPS). The 44.45mm (1-3/4)”
intercooler clamp (sold separately) to be used. The internal bore of the bore is designed with a special radius which promotes maximum air flow and
adapter has been designed to ensure a smooth transition to the throttle body minimum turbulence 6.3mm (1/4”) thread in centre for air filter stud.
for maximum flow. Machined from billet 6061-T6 aluminium and anodized in
a black finish. They are also offered in a weld-on configuration (raw finish) to Flange Aluminium Black
weld onto the front of your intake manifold.
4150/4500 AF64-2250 AF64-2250BLK
Part No Description

FUEL SYSTEMS & EFI ACCESSORIES

AF64-2138 suits 74mm Bosch DBW and 3” intercooler clamp
AF64-2139 suits 82mm Bosch DBW and 3-1/2” intercooler clamp
AF64-2145 suits 74mm Bosch DBW Raw WELD ON
AF64-2146 suits 82mm Bosch DBW Raw WELD ON

AF64-2134

DRIVE BY WIRE ACCELERATOR PEDAL

The Bosch accelerator pedal and built in module is a great solution to
BILLET FLY-BY-WIRE
match the Bosch DBW electronic throttle body. When converting from THROTTLE BODY
the mechanical cable to a drive by wire system, a electric pedal sensor is
required to relay accelerator position back to the ECU to accurately control Aeroflow Performance fly by wire LS series billet throttle body. This CNC
the electronic throttle body. These are universal fitment and will require machined 102mm (4-1/64”) throttle body is a must have for any high level
fabrication to fit into the foot well or pedal box. boost application and also N/A applications. Featuring a heavy duty motor
- 16degree (~70mm) travel that won’t buckle, shudder and deflect under load. The standard 4 bolt flange
- Firewall mounted hanging design pattern and 6 pin plug means this throttle body is a bolt-on and plug in kit.
- Redundant dual output potentiometers suitable for use with Electronic
throttle bodies NOTE : FOR FULL THROTTLE CLEARANCING WILL BE REQUIRED
-Operating Voltage is 5 ±0.3volts ON INTAKE / SNOUT SIDE TO CLEAR BUTTERFLY. TUNING WILL BE
-Operating Temperature is -40 to 80 degrees C (-40oF to 176oF) REQUIRED.

Size Silver Black

Aeroflow BOSCH Description
Part No Part No 102mm (4”) AF64-2134 AF64-2134BLK

AF64-2137 0 280 755 051 Accelerator Pedal Module Note: Fly by wire plug & pins SOLD SEPARATELY AF49-2134
AF49-2137 Accelerator Pedal plug & pins
aeroflowperformance.com 189
 EFI FUEL RAILS

BILLET EFI FUEL RAILS

Aeroflow’s Billet EFI Fuel rails feature precision machining with heavy duty
mounts for high pressure applications. Aeroflow fuel rails are threaded with a
-8 ORB port and have a 16.1mm (5/8”) size bore. Aeroflow fuel rails are hard
anodised and are available in blue, black, red and polished finishes. All billet
rails are to suit 14mm (9/16”) injectors. For 11mm (7/16”) injectors use AF889
adapters.

GM LSA FUEL RAIL

Aeroflow Performance have developed new billet fuel rails for the GM LSA
supercharged engine. It is a straight bolt on to use with 14mm (9/16”) factory
injectors or aftermarket injectors. These return style fuel rails feature larger
-8orb dual inlets and dual outlets which have many benefits over the OEM
dead end fuel rails which can cause hot start issues. Fuel rails are hard
anodised and available in blue, black, red and polished finishes. This rail
includes 8x-4ORB port plugs.
304 - 355 AF64-2008BLK We recommend to use our slimline orb port fittings
AF919-06-08 for -6AN line or AF919-08 for -8an line when installing these
SUIT HOLDEN (GM Australia) rails. See page 71
Suits full length injector 60.65mm (2-25/64”)
Suits Blue Red Black Polished
Suits Blue Red Black Polished GM LSA AF64-2124 AF64-2124R AF64-2124BLK AF64-2124P

VN-VT AF64-2008 AF64-2008R AF64-2008BLK AF64-2008P

FUEL SYSTEMS & EFI ACCESSORIES

FG TURBO (6cyl) AF64-2113R

LS1 AF64-2005R

LS2 & LS3 AF64-2006

WINDSOR AF64-2077BLK

FORD (Australia) BA-BF AF64-2004BLK

LS7 AF64-2007BLK

SUIT GM LS
LS1 suits full length injector 60.65mm (2-25/64”)
LS2 suits short injector 33.60mm (1-21/64”)
LS7 suits short injector 33.60mm (1-21/64”) or 3/4 length 48.65mm (1-29/32”) SUIT FORD
Ford BA -BF & Windsor suits full length injector 60.65mm (2-25/64”)
Suits Blue Red Black Polished Ford FG TURBO suits 3/4 length injector 48.65mm (1-29/32”)
LS1 AF64-2005 AF64-2005R AF64-2005BLK AF64-2005P
LS2/LS3 AF64-2006 AF64-2006R AF64-2006BLK AF64-2006P Suits Blue Red Black Polished
LS7 AF64-2007 AF64-2007R AF64-2007BLK AF64-2007P
BA-BF(6cyl) AF64-2004 AF64-2004R AF64-2004BLK AF64-2004P
FG (6cyl) AF64-2113 AF64-2113R AF64-2113BLK AF64-2113P
Windsor AF64-2077 AF64-2077R AF64-2077BLK AF64-2077P

190 aeroflowperformance.com
 EFI FUEL RAILS

Note: AF59-2061
EJ20 injector seat adapters (4 pieces)
4G63/EVO 4-9 AF64-2121P

AF59-2058 4G63/EVO I-III

MY98-00 Mounts AF64-2078R
EJ20 AF64-2058 with AF59-2058 mounts
Sold separately

SUIT MITSUBISHI EVOLUTION

Evo rails suit full length injector 60.65mm (2-25/64”)

EJ20 AF64-2058
Suits Blue Red Black Polished
Note: Top Feed
4G63/1-3 AF64-2078 AF64-2078R AF64-2078BLK AF64-2078P
4G63/4-9 AF64-2121 AF64-2121R AF64-2121BLK AF64-2121P

FUEL SYSTEMS & EFI ACCESSORIES

EJ25 AF64-2057R
Note: Side Feed TOYOTA / SUBARU AF64-2131
SUIT SUBARU
AF64-2058 suit full length injector 60.65mm (2-25/64”)

Suits Blue Red Black Polished

TOYOTA 2JZGTE AF64-2059
EJ20/25 AF64-2057 AF64-2057R AF64-2057BLK AF64-2057P
EJ20/25 AF64-2058 AF64-2058R AF64-2058BLK AF64-2058P
FA20 AF64-2131 AF64-2131R AF64-2131BLK AF64-2131P

AF59-2058 MY98-00 Mounts only suit AF64-2058 rails SUIT TOYOTA

2JZ suit full length injector 60.65mm (2-25/64”)

Suits Blue Red Black Polished

2JZGTE* AF64-2059 AF64-2059R AF64-2059BLK AF64-2059P
FA20 AF64-2131 AF64-2131R AF64-2131BLK AF64-2131P

* NOTE: Suits NON VVTI engines ONLY

13B (4&5) AF64-2013B
13B with standard series 4 intake manifold
clearancing may be required for primary fuel rail.

SUIT HONDA K SERIES

Aeroflow Performance provides the solution when converting a Honda K-
Series return-less fuel injection system to a return style system for use in
all Honda K-Series powered vehicles. It may also be used on the return-
less systems found in OEM Honda K-Series powered vehicles, but only
in conjunction with our optional Aeroflow Performance -8ORB to Honda
SUIT MAZDA ROTARY 5/16” Quick-Connect Fuel Fitting (AF811-08-05BLK Sold Separately).
Featuring -8 ORB inlet and outlet ports on either end with a -8ORB centre
Mazda rails suit full length injector 60.65mm (2-25/64”) port for dual-feed fuel systems. Compatible with stock and aftermarket
injectors. Includes fuel rail, mounting bolts, 8AN port plug, and two -8ORB
to -6AN adapters
Suits Black Polished
13B (4&5) AF64-2013BLK AF64-2013P Suits Blue Red Black Polished
13B (6,7&8) AF64-2104BLK AF64-2104P
K20 / K24 AF64-2140 AF64-2140R AF64-2140BLK AF64-2140P
Note: AF59-2013 Injector seat adapters (4 pieces)

aeroflowperformance.com 191
 EFI FUEL RAILS

Note: AF59-2009 Injector seat adapters (4 pieces)

NISSAN SR20 AF64-2009

FUEL RAIL EXTRUSION

Part No Description
AF64-2003 Fuel rail extrusion, 1 metre 3ft 3-3/8” (16.1mm (5/8”) bore)
AF64-4132 Fuel rail extrusion, 1 metre 3ft 3-3/8” (20mm (3/4”) bore)

NISSAN RB25 AF64-2010R

Note: AF59-2010 Injector seat adapters (6 pieces)
FUEL RAIL ADAPTER FITTING GUIDE
Model Engine Part No

Mazda 13BREW=FD3S RX7 Series 6 AF64-2064

Mazda 13B=RX7 Series 4 AF64-2063
Mitsubishi 4G63 = Evo 4,5,6,7,8,9 AF64-2066
NISSAN RB26 AF64-2011P Mitsubishi 4B11T = Evo 10 AF64-2067
Nissan SR20DET = S13,S14,S15 Silvia
RB26DETT = R32,R33,R34 GTR
RB25DET = R32,R33,R34 Skyline AF64-2064
Subaru EJ20 = GC8 WRX before bug eye
NISSAN RB30 AF64-2012BLK
EJ25= WRX 08 onwards (not STI)
EJ25= Liberty 05 onwards
EJ25= Forester 08 onwards AF64-2064
Subaru EJ20= GDA WRX Bug eye onwards AF64-2065
FUEL SYSTEMS & EFI ACCESSORIES

Subaru EJ25= WRX STI 08 AF64-2067

Toyota 2JZGTE = JZA80 , JZS147
4EFTE= EP Starlet
4AGZE , 4AGE AF64-2065
NISSAN SR20 S14 Toyota 3SGTE = MR2, Celica, GT4, 1JZGTE
AF64-2122 1UZ-FE Lexus/Soarer V8 AF64-2067
Honda B16A = EG6 Civic, EK4 Civic, CRX
B16B = EK9 Civic AF64-2068
Ford BA, BF, FG XR6 Turbo, Territory Turbo AF64-2062
Audi All models using Bosch adapters AF64-2062

NOTE: Add colour code to Part No as required.

FUEL RAIL ADAPTERS

SUIT NISSAN Aeroflow’s precision machined fuel rail adapters allow the use of aftermarket
adjustable fuel pressure regulators with your factory fuel rails. All adapters
SR20 S13, RB26, RB30 suit full length injector 60.65mm (2-25/64”)
have a 1/8” NPT female port.
SR20 S14 suit short injector 33.60mm (1-21/64”)
RB25 suits 3/4, 48.65mm (1-29/32”) or full length injector 60.65mm (2-25/64”)

Suits Blue Red Black Polished

SR20 S13 AF64-2009 AF64-2009R AF64-2009BLK AF64-2009P Suit Toyota, Subaru 40mm (1-37/64) centres
SR20 S14 AF64-2122 AF64-2122R AF64-2122BLK AF64-2122P AF64-2065
RB25* AF64-2010 AF64-2010R AF64-2010BLK AF64-2010P AF64-2065R
RB26 AF64-2011 AF64-2011R AF64-2011BLK AF64-2011P AF64-2065BLK
RB30 AF64-2012 AF64-2012R AF64-2012BLK AF64-2012P AF64-2065S

Note: Aeroflow fuel rail kits are designed to work with standard length injectors.
*Suits aftermarket plenum or standard plenum with
48.65mm(1-29/32”) length injectors SUITS R33 ONLY

Suit Subaru, Nissan, Mazda 32.5mm

(1-9/32”) centres

AF64-2064
AF64-2064R
SUIT VW and AUDI AF64-2064BLK
AF64-2064S
Suits all volkswagen and audi 20 valve 1.8L turbo models. -8ORB ports.

Suits Blue Red Black Polished

20V 1.8L AF64-2133 AF64-2133R AF64-2133BLK AF64-2133P

192 aeroflowperformance.com
 EFI FUEL RAIL ACCESSORIES

Suit Audi, VW,

Ford BA, BF, FG, XR6, Territory
(Suits TURBO Rail ONLY on Fords)
AF64-2062 Blue
AF64-2062R Red
AF64-2062BLK Black
AF64-2062S Silver

EFI REGULATOR ADAPTERS SUIT FORD

Suit Mazda RX-7, Toyota MR2, AN Shank Blue Black Silver
Celica GT4 -6 7/16” AF64-4356 AF64-4356BLK AF64-4356S
AF64-2063 -6 9/16” AF64-5506 AF64-5506BLK AF64-5506S
AF64-2063R -8 9/16” AF64-5508 AF64-5508BLK AF64-5508S
AF64-2063BLK
AF64-2063S

Suit Mitsubishi EVO 10.

39.1mm ( 1-17/32”) centres
AF64-2068
AF64-2068R
AF64-2068BLK
AF64-2068S
LS CHEVY FUEL PRESSURE ADAPTER
To ensure a precise fuel pressure reading for optimum performance,
Aeroflow’s LS fuel pressure adapter allows the user to adapt a fuel pressure
gauge to the standard LS series fuel rail.
With the female -4 and female 1/8” NPT this fitting can also be used on
other applications.

FUEL SYSTEMS & EFI ACCESSORIES

Suit Subaru STi EJ25 2008 - on Note: The removal of the schrader valve is necessary.
AF64-2067
AF64-2067R Port Blue Black Silver
AF64-2067BLK
AF64-2067S 1/8” NPT AF146-02 AF146-02BLK AF146-02S

NISSAN S14 S15

FUEL INJECTOR
SEAT ADAPTERS
Suit Mitsubishi 16mm (41/64”) seal &
37-40mm (1-29/64”- 1-37/64”) centres
AF64-2066
AF64-2066R Part No Description
AF64-2066BLK
AF64-2066S AF59-2122 Nissan S14 S15 fuel injector seat adapters (Pack of 4)

INJECTOR INSERT
ADAPTER

Part No Description
AF889 Injector Adapter 11mm (7/16”) to 14mm (9/16”) 6pc pack

WELD ON INJECTOR
STANDARD REGULATOR ADAPTER BUNG (1 per pack)
SUITS HOLDEN (GM Australia) Aeroflow weld on injector bungs can be used in two ways. the manifold can
Aeroflow’s Billet fuel regulator adapter allows the use of your standard factory be drilled to 16mm (5/8”) to suit an o-ring seal or simply remove the o-ring
fuel regulator when upgrading to Aeroflow’s billet fuel rail kit. and weld them directly to the manifold.

Part No Description
Suits Blue Red Black Silver AF888 Weld on injector bung
Suits Holden V8 14mm (9/16”) & 16mm (5/8”) Female/Male
304 - 355 AF64-2200 AF64-2200R AF64-2200BLK AF64-2200S

aeroflowperformance.com 193
 EFI FUEL INJECTORS

INJECTOR BLANK OFF INSERTS (4 per pack)

Injector blank off adapters allow you to blank off un-used injector ports in your
intake manifold and fuel rails. Suits 3/4 length & full length injector spacing. MAINTAINING INJECTOR WIRING
Replacement injectors are only as good as the wiring, pins and
Part No Description plugs that supply current and voltage to them. Always check your
(Pack of 4) injector plugs and pins for signs of pin corrosion and crumbling plastic
AF64-2888 Suits 60.65mm (2-25/64”) and connectors. If in doubt, it can be cheap insurance to replace your fuel
48.65mm (1-29/32”) injector lengths. injector connectors with brand new items to ensure positive electrical
connections. See pages 252 - 255 for injector looms & plugs.

INJECTOR LENGTH ADAPTERS

(4 per pack)

Alumimium injector spacers allows the use of shorter injectors to be used with
Aeroflow fuel rails and also adapts 14mm(9/16”) injectors to 11mm(7/16”) for
use with std fuel rails.

Part No Description
FUEL SYSTEMS & EFI ACCESSORIES

(Pack of 4)
AF64-2884 27mm (1-1/16”) suit 11mm (7/16”) rail FUEL INJECTORS
AF64-2885 12mm (15/32”) suit 11mm (7/16”) rail
AF64-2886 27mm (1-1/16”) suit 14mm (9/16”) rail Aeroflow Performance now stock the most popular range of performance fuel
AF64-2887 12mm (15/32”) suit 14mm (9/16”) rail injectors from Bosch Motorsport. Don’t be fooled these are genuine Bosch
AF64-2888 12mm (15/32”) suit 14mm (9/16”) rail extended tip injector products beware of fake products listed as genuine, we buy direct from Bosch
AF64-2889 12mm (15/32”) suit 14mm (9/16”) rail extended tip injector Motorsport Australia. With these fuel injectors Aeroflow Performance can now
offer each customer a one stop shop for your entire fuel delivery system. We
(Pack of 1 only) offer fuel injectors with a variety of flow rates, physical sizes, and fuel compat-
AF64-2884-1 27mm (1-1/16”) suit 11mm (7/16”) rail ibility ranging from pump 98 to E85, Methanol and popular race fuels. We
AF64-2885-1 12mm (15/32”) suit 11mm (7/16”) rail recommend after methanol-operating, the fuel injectors must be flushed with
AF64-2886-1 27mm (1-1/16”) suit 14mm (9/16”) rail standard gasoline-fuel to prolong the life of the injector and stops them from
AF64-2887-1 12mm (15/32”) suit 14mm (9/16”) rail blocking up. Each injector O-ring is compatible with ethanol/alcohol fuels and
AF64-2888-1 12mm (15/32”) suit 14mm (9/16”) rail extended tip injector pump 98 fuel. These injectors can be driven with the saturated drivers found
AF64-2889-1 12mm (15/32”) suit 14mm (9/16”) rail extended tip injector in every OEM ECU and most aftermarket ECU’s for ease of useability across
the board. The injectors are able to function at high fuel pressures and don’t
exhibit the high fuel pressure handling problems found with many other high
flow high-impedance injectors. This allows you to use a larger injector than
normally possible without hurting idle and low speed driveability. This makes
33.60mm 48.65mm these injectors very well suited to turbocharged and supercharged aftermar-
1-5/16” 1-29/32” 60.65mm
ket or OEM applications that see high fuel system pressures and in fact, that
2-25/64” is exactly what they were designed for! We also stock a full range of injector
connector plug adapters enabling a quick and simple upgrade to almost any
11mm 7/16”
vehicle.
Note: These injectors have no filters screen installed. We recommend using
an Aeroflow 10 micron fuel filter in the fuel line before the fuel rails to protect
EV 14K 24mm
the injectors from debris.
15/16”
Compact EV 14S
Standard
EV 14 xT EV 14L
with Extension Long
Aeroflow fuel rails are designed to be used with 60.65mm (2-25/64”) 495CC EV14 FUEL INJECTOR
(measurement is from inside O-ring to inside O-ring see diaphragm) - 495cc/min ( 44lb/hr ) @ 3bar ( 43.5PSI )
- Spray Pattern: Single cone spray
- Dimensions: 33.6mm (1-5/16”) O-ring seat to seat
( Short body length )
- Overall Length: 50.3mm (1-63/64”)
- Injector diameter: 14 mm (35/64”)
- Regular tip nozzle
- Coil Resistance: 12 Ohms ( High Impedance )
- Voltage range is 8-15 Volts.
- Electrical Connector: USCAR connector ( AF49-1523 )
- E85 / Alcohol fuel compatible
- Fitted with Viton upper and lower O-rings
- Direct fit for LSA , LS3 ( GM- Part Number : 12598646 )

Aeroflow BOSCH Description

Fuel injectors shown with Aeroflow injector length adapters to achieve Part No Part No
60.65mm (2-25/64”) body height.
AF49-1900 0 280 158 187 495cc EV14 fuel injector
194 aeroflowperformance.com
 EFI FUEL INJECTORS

627CC EV14 FUEL INJECTOR WITH

EXTENDED TIP
547CC EV14 FUEL INJECTOR - 627cc/min ( 57lb/hr ) @ 3bar ( 43.5PSI )
- 547cc/min ( 50lb/hr ) @ 3bar ( 43.5PSI ) - Spray Pattern: Wide split dual 22 Degree cone spray
- Spray Pattern: Wide split dual cone spray - Dimensions: 48.5mm (1-29/32”) O-ring seat to seat
- Dimensions: 60.65mm (2-3/8”) O-ring seat to seat (Full body length) ( Standard body length )
- Overall Length: 65.5mm (2-9/16”) -Overall Length: 65.5mm (2-9/16”)
- Injector diameter: 14mm (35/64”) - Injector diameter: 14mm (35/64”)
- Regular tip nozzle - Extended tip nozzle
- Coil Resistance: 12 Ohms ( High Impedance ) - Coil Resistance: 12 Ohms ( High Impedance )
- Voltage range is 8-15 Volts. - Voltage range is 8-15 Volts.
- Injector dead time: 0.73sec @ 3BAR (43.5PSI) @ 14 Volts - Electrical Connector: Jetronic / Bosch connector
- Electrical Connector: USCAR connector ( AF49-1523 ) ( AF49-1524 )
- E85 / Alcohol fuel compatible - E85 / Alcohol fuel compatible
- Fitted with Viton upper and lower O-rings -Fitted with Viton upper and lower O-rings
- Can be used as replacement for Ford Coyote engines, - Can be used as replacement for BMW S85, Mercedes AMG C63, Porsche
generic use or custom applications 997 engines, generic use or custom applications.
Most applications for this injector will require injector length adapters that are
Aeroflow BOSCH Description sold separately AF64-2888 or AF64-2889

Part No Part No
AF49-1901 0 280 158 279 547cc EV14 fuel injector Aeroflow BOSCH Description
Part No Part No
AF49-1904 0 280 158 123 627cc EV14 fuel injector

547CC EV14 FUEL INJECTOR

731CC EV14 FUEL INJECTOR

FUEL SYSTEMS & EFI ACCESSORIES

- 547cc/min ( 50lb/hr ) @ 3bar ( 43.5PSI )
- Spray Pattern: Wide split dual cone spray - 731cc/min ( 66lb/hr ) @ 3bar ( 43.5PSI )
- Dimensions: 60.65mm (2-3/8”) O-ring seat to seat (Full body length) - Spray Pattern: Single 30 Degree cone spray
- Overall Length: 65.5mm (2-9/16”) - Dimensions: 33.60mm (1-5/16”) O-ring seat to seat ( Short body length )
- Injector diameter: 14mm (35/64”) - Overall Length: 50.3mm (1-63/64”)
- Regular tip nozzle - Injector diameter: 14mm (35/64”)
- Coil Resistance: 12 Ohms ( High Impedance ) - Regular tip nozzle
- Voltage range is 8-15 Volts. - Coil Resistance: 12 Ohms ( High Impedance )
- Injector dead time: 0.73sec @ 3BAR (43.5PSI) @ 14 Volts - Voltage range is 8-15 Volts.
- Electrical Connector: USCAR connector ( AF49-1523 ) - Injector dead time: 0.77sec @ 3BAR (43.5PSI) @ 14 Volts
- E85 / Alcohol fuel compatible - Electrical Connector: USCAR connector ( AF49-1523 )
- Fitted with Viton upper and lower O-rings - E85 / Alcohol fuel compatible
- Can be used as replacement for Ford Mustang - Fitted with Viton upper and lower O-rings
2006 to 2012, generic use or custom applications - Can be used for generic use or custom applications

Aeroflow BOSCH Description

Aeroflow BOSCH Description Part No Part No
Part No Part No
AF49-1905 0 280 158 290 731cc EV14 fuel injector
AF49-1902 0 280 158 117 547cc EV14 fuel injector

731CC EV14 FUEL INJECTOR

- 731cc/min ( 66lb/hr ) @ 3bar ( 43.5PSI )
- Spray Pattern: Single 30 Degree cone spray
621CC EV14 FUEL INJECTOR - Dimensions: 48.65mm (1-29/32”) O-ring seat to seat
- 621cc/min ( 56lb/hr ) @ 3bar ( 43.5PSI ) ( Standard body length )
- Spray Pattern: Wide split dual cone spray - Overall Length: 65.5mm (2-9/16”)
- Dimensions: 48.5mm (1-29/32”) O-ring seat to seat - Injector diameter: 14mm (35/64”)
(Standard body length) - Regular tip nozzle
- Overall Length: 65.5mm (2-9-16”) - Coil Resistance: 12 Ohms ( High Impedance )
- Injector diameter: 14mm (35/64”) - Voltage range is 8-15 Volts.
- Regular tip nozzle - Injector dead time: 0.77sec @ 3BAR (43.5PSI) @ 14 Volts
- Coil Resistance: 12 Ohms ( High Impedance ) - Electrical Connector: Sumitomo / Denso connector
- Voltage range is 8-15 Volts. ( AF49-1522 )
- Electrical Connector: USCAR connector ( AF49-1523 ) - E85 / Alcohol fuel compatible
- E85 / Alcohol fuel compatible -Fitted with Viton upper and lower O-rings
- Fitted with Viton upper and lower O-rings - Can be used as replacements for Audi (06H 906 031), VW (06H 906 031),
- Can be used as replacement for Ford Mustang GT 2013 to 2014, VW Golf generic use or custom applications
Jetta Passat 01-05 1.8T, Audi A4 TT, generic use or custom applications

Aeroflow BOSCH Description

Aeroflow BOSCH Description Part No Part No
Part No Part No
AF49-1906 0 280 158 235 731cc EV14 fuel injector
AF49-1903 0 280 158 298 621cc EV14 fuel injector

aeroflowperformance.com 195
 EFI FUEL INJECTORS

980CC EV14 FUEL INJECTOR 2200CC EV14 CNG FUEL INJECTOR

- 980cc/min ( 89lb/hr ) @ 3bar ( 43.5PSI )
- 1100cc/min ( 105 Lb/hr ) @ 4 bar ( 58PSI ) - 2200cc/min ( 160lb/hr ) @ 3bar ( 43.5PSI )
- Spray Pattern: Wide split dual cone spray - 2550cc/min ( 210 Lb/hr ) @ 4 bar ( 58PSI )
- Dimensions: 33.60mm (1-5/16”) O-ring seat to seat - 2865cc/min ( 240 Lb/hr ) @ 5.40 bar ( 78.5PSI )
(Short body length) - 3155cc/min ( 300 Lb/hr ) @ 6 bar ( 88PSI )
- Overall Length: 50.3mm (1-63/64”) - CNG Gas fuel injector
- Injector diameter: 14mm (35/64”) - Spray Pattern: Single cone spray
- Extended tip nozzle - Dimensions: 33.60mm (1-5/16”) O-ring seat to seat
- Coil Resistance: 12 Ohms ( High Impedance ) (Short body length)
- Voltage range is 8-15 Volts. - Injector diameter: 14mm (35/64”)
- Injector dead time: 1.12sec @ 3BAR (43.5PSI) @ 14 Volts - Overall Length: 50.3mm (1-63/64”)
- Electrical Connector: Jetronic / Bosch connector ( AF49-1524 ) - Short tip nozzle
- E85 / Alcohol fuel compatible - Coil Resistance: 9.1 ohms ( High Impedance )
-Fitted with Viton upper and lower O-rings - Voltage range is 8-15 Volts.
- Can be used as replacements for Ford FG & FG X Turbo ( with 12mm injec- - Injector dead time: 0.43sec @ 3BAR (43.5PSI) @ 14 Volts
tor adaptor ), generic use or custom applications. - Electrical Connector: Sumitomo / Denso connector ( AF49-1522 )
Most applications for this injector will require injector length adapters that are - E85 / Alcohol fuel compatible
sold separately AF64-2888 or AF64-2889 - Fitted with Viton upper and lower O-rings
- Can be used in generic use or custom applications

Aeroflow BOSCH Description Aeroflow BOSCH Description

Part No Part No Part No Part No
AF49-1907 0 280 158 040 980cc EV14 fuel injector AF49-1910 0 280 158 821 2200cc EV14 CNG fuel injector

2200CC EV14 CNG FUEL INJECTOR

- 2200cc/min ( 160lb/hr ) @ 3bar ( 43.5PSI )
1462CC EV14 FUEL INJECTOR - 2550cc/min ( 210 Lb/hr ) @ 4 bar ( 58PSI )
- 2865cc/min ( 240 Lb/hr ) @ 5.40 bar ( 78.5PSI )
- 1462cc/min ( 132lb/hr ) @ 3bar ( 43.5PSI )
- 3155cc/min ( 300 Lb/hr ) @ 6 bar ( 88PSI )
- 1650cc/min ( 105 Lb/hr ) @ 4 bar ( 58PSI )
- CNG Gas fuel injector
FUEL SYSTEMS & EFI ACCESSORIES

- Spray Pattern: Single cone spray

- Spray Pattern: Single cone spray
- Dimensions: 33.60mm (1-5/16”) O-ring seat to seat
- Dimensions: 33.60mm (1-5/16”) O-ring seat to seat
( Short body length )
(Short body length)
- Overall Length: 50.3mm (1-63/64”)
- Injector diameter: 14mm (35/64”)
- Injector diameter: 14mm (35/64”)
- Overall Length: 50.3mm (1-63/64”)
- Regular tip nozzle
- Short tip nozzle
- Coil Resistance: 8.5 ohms
- Coil Resistance: 9.1 ohms ( High Impedance )
- Voltage range is 8-15 Volts.
- Voltage range is 8-15 Volts.
- Injector dead time: 0.81sec @ 3BAR (43.5PSI) @ 14 Volts
- Injector dead time: 0.43sec @ 3BAR (43.5PSI) @ 14 Volts
- Electrical Connector: Jetronic / Bosch connector ( AF49-1524 )
- Electrical Connector: USCAR connector ( AF49-1523 )
- E85 / Alcohol fuel compatible
- E85 / Alcohol fuel compatible
- Fitted with Viton upper and lower O-rings
-Fitted with Viton upper and lower O-rings
- Can be used in generic use or custom applications
- Can be used in generic use or custom applications
Aeroflow BOSCH Description Aeroflow BOSCH Description
Part No Part No Part No Part No
AF49-1908 0 280 158 333 1462cc EV14 fuel injector AF49-1911 0 280 158 843 2200cc EV14 CNG fuel injector

1680CC EV14 CNG FUEL INJECTOR

- 1680cc/min ( 160lb/hr ) @ 3bar ( 43.5PSI )
- 2000cc/min ( 195 Lb/hr ) @ 4 bar ( 58PSI )
- CNG Gas fuel injector
- Spray Pattern: Single cone spray
- Dimensions: 60.65mm (2-3/8”) O-ring seat to seat FUEL INJECTOR
(Full body length)
- Overall Length: 65.5mm (2-9/16”)
SERVICE KIT
- Injector diameter: 14mm (35/64”) The Aeroflow Performance fuel injector service kit
- Regular tip nozzle contains the most common components required to
- Coil Resistance: 9.1 ohms ( High Impedance ) rebuild most fuel injectors. All fuel injectors require
- Voltage range is 8-15 Volts. quality service and repair components over the life
- Injector dead time: 0.45sec @ 3BAR (43.5PSI) @ 14 Volts of the injector to ensure the longevity of each one.
- Electrical Connector: Jetronic / Bosch connector ( AF49-1524 ) This will ensure correct fuel flow through the
- E85 / Alcohol fuel compatible each injector and for safety reasons the long
- Fitted with Viton upper and lower O-rings term continuous sealing of fuel under pressure
- Commonly known as “Bosch Indy Blue” through a range of extreme temperatures and operating
- Can be used as replacements in LS1, Ford B-Series Turbo, conditions. We recommend new seals be fitted whenever an
EA-EL and any full length EV1/EV6 applications, generic injector is removed from its sealing surface. The renewal of any “buffer”
use or custom applications. rubbers is also required to ensure the correct seating and location of the
injector. This kit contains buffer seals, body seals, filters, space washers,
lower seals, as well as upper and lower O-rings.
Each kit is available in Viton for regular 98 fuels and Buna material for E85
Aeroflow BOSCH Description and alcohol fuels.
Part No Part No
Part No Description
AF49-1909 0 280 158 827 1600cc EV14 CNG fuel injector
AF98-2125 Viton material
AF98-2126 Buna material

196 aeroflowperformance.com
 FUEL GAUGES & ACCESSORIES

MAINTAINING LIQUID FILLED

GAUGES
Over time liquid filled gauges can build up pressure that may throw off
their calibration. It is recommended that every change of season you
INLINE BARB WITH 1/8” PORT place the gauge face down and uncap/recap the rubber grommet to
release any pressure build up.This will ensure the gauge reads correctly.
These Aeroflow billet fuel pressure gauge adapters are ideal for adding a
fuel pressure gauge to your fuel system. Made from lightweight aluminium
and tapped 1/8” NPT for your fuel gauge, they are available in sizes 7.93mm
(5/16”) barb and 9.52mm (3/8”) barb

Barb Blue Black Silver

7.93mm 5/16” AF138-05 AF138-05BLK AF138-05S
9.52mm 3/8” AF138-06 AF138-06BLK AF138-06S

With 1/8”
female port

FUEL SYSTEMS & EFI ACCESSORIES

LIQUID FILLED
PRESSURE GAUGES 38mm (1-1/2”) M12 BANJO BOLT WITH 1/8” PORT
GAUGE ADAPTOR
Part No Description This Aeroflow adapter offers an easy way to install fuel pressure, oil pressure
or temperature gauge senders into most cars. It features a M12 x 1.25mm
AF30-2200 1 Bar (15 PSI) (black face, white pointer) banjo thread with a female 1/8 NPT. Made from 304 stainless steel.
AF30-2208 2 Bar (30 PSI) (black face, white pointer)
AF30-2201 7 Bar (100 PSI) (black face, white pointer)
Part No Description
AF30-2202 1 Bar (15 PSI) (white face, black pointer)
AF30-2209 2 Bar (30 PSI) (white face, black pointer) AF316-04P Adapter to suit installation of gauges to modern vehicles
AF30-2203 7 Bar (100 PSI) (white face, black pointer)
Note: All 1/8” NPT male thread.

PRESSURE GAUGES 38mm (1-1/2”)

Part No Description
AF30-2204 1 Bar (15 PSI) (black face, white pointer)
AF30-2210 2 Bar (30 PSI) (black face, white pointer)
AF30-2205 7 Bar (100 PSI) (black face, white pointer)
AF30-2206 1 Bar (15 PSI) (white face, black pointer)
AF30-2211 2 Bar (30 PSI) (white face, black pointer)
AF30-2207 7 Bar (100 PSI) (white face, black pointer)
Note: All 1/8” NPT male thread.
aeroflowperformance.com 197
 CARBURETTOR ACCESSORIES

AF64-2044BLK

AF64-2045

CARBURETTOR STUDS
Part No Description
AF55-1008 Silver 35mm (1-3/8”) total length
AF55-1008BLK Black 35mm (1-3/8”) total length

AF64-2090BLK

AF64-2071 CARBURETTOR
THROTTLE
LINKAGE BALLS
HIGH VELOCITY SPACER Ball sizes 6.33mm (1/4”), 5.5mm (7/32”),
Aeroflow’s high velocity spacers increase the velocity of the fuel/air charge. 6.9mm (17/64”)
This assists in enhancing fuel atomisation, increases throttle response,
boosts your high RPM power and insulates the carburettor from the manifold.
Part No Description
They are available in raw finish, chrome or black anodized and are made
from 6061-T6 billet aluminium. AF55-1004 Throttle ball assortment kit 4 balls, nuts & washers
ENGINE COMPONENTS & ACCESSORIES

Part No Flange Description Finish

AF64-2044 4150 25.4mm (1”) tapered Raw AF42-1106
AF64-2044BLK 4150 25.4mm (1”) tapered Black
AF64-2044C 4150 25.4mm (1”) tapered Chrome
AF64-2045 4500 25.4mm (1”) tapered Raw
AF64-2045BLK 4500 25.4mm (1”) tapered Black
AF64-2045C 4500 25.4mm (1”) tapered Chrome
AF64-2090 4500 25.4mm (1”) open Raw
AF64-2090BLK 4500 25.4mm (1”) open Black
AF42-1104BLK
AF64-2090C 4500 25.4mm (1”) open Chrome
AF64-2071 4150 50.8mm (2”) tapered Raw
AF64-2071BLK 4150 50.8mm (2”) tapered Black AF42-1104
AF64-2071R 4150 50.8mm (2”) tapered Red
AF64-2071C 4150 50.8mm (2”) tapered Chrome

AF42-1100

AF42-1105

THROTTLE CABLES
Aeroflow’s Throttle Cables are 308 stainless steel braided covering over a
AF57-4152 hard-wearing high quality PTFE liner. These universal throttle cables contain
all of the necessary hardware for a complete installation onto any application.
They are available in 24”(609mm), 36” (914mm), 48” (1219mm) and 60”
AF57-4150 (1524mm) lengths (measurements are for outer braid NOT INNER CABLE).
The inner stainless wire can also be cut to fit any desirable length.

AF57-4151 Part No Finish Description

Stainless Steel
AF42-1100 S/Steel 61cm (24”) long throttle cable
AF42-1101 S/Steel 91cm (36”) long throttle cable
AF42-1102 S/Steel 122cm (48”) long throttle cable
CARBURETTOR GASKETS AF42-1103 S/Steel 152cm (60”) long throttle cable

Black coated Stainless Steel

Part No Description Amount AF42-1100BLK Black 61cm (24”) long throttle cable
AF42-1101BLK Black 91cm (36”) long throttle cable
AF57-4150 4150 base gasket open hole single gasket AF42-1102BLK Black 122cm (48”) long throttle cable
AF57-4150-10 4150 base gasket open hole 10 pack AF42-1103BLK Black 152cm (60”) long throttle cable
AF57-4151 4150 base gasket 4 hole single gasket
AF57-4151-10 4150 base gasket 4 hole 10 pack Throttle Cable Accessories
AF57-4152 Spread bore gasket 4 hole single gasket AF42-1104 S/Steel Chrome Throttle cable bracket & spring
AF57-4152-10 Spread bore gasket 4 hole 10 pack AF42-1104BLK Black Black Throttle cable bracket & spring
AF42-1105 S/Steel Chrome Dual springs only
AF42-1106 S/Steel Carby end assembly for all cables
AF59-1102 S/Steel Throttle cable end with grub screw

198 aeroflowperformance.com
 CARBURETTOR ACCESSORIES

0
p a g e 169-17 tor
See et
m o r e carbur
for sorie s
acces

RETURN SPRINGS 2 PIECES

These Aeroflow Performance dual throttle return springs help
you to achieve the added throttle return response needed
with any high performance carburettor. Suits all Aeroflow
billet return brackets and throttle cable brackets.

Part No Description
AF59-2031 Suits Aeroflow billet throttle cable bracket

ENGINE COMPONENTS & ACCESSORIES

AF59-1102
STAINLESS STEEL
CARBURETTOR LINKAGE ARMS GM LS THROTTLE CABLES
1/4” ball size Part No Finish Description
AF42-1101LS1 S/Steel 91cm (36”) long throttle cable
Part No Description AF42-1101LS1BLK Black 91cm (36”) long throttle cable
AF42-1002 adjusts from 70mm (2-3/4”) to 95mm (3-3/4”) AF59-1102 Replacement cable end
AF42-1003 adjusts from 95mm (3-3/4”) to 120mm (4-3/4”)
AF42-1004 adjusts from 120mm (4-3/4”) to 145mm (5-3/4”)
AF42-1005 adjusts from 145mm (5-3/4”) to 170mm (6-3/4”)
AF42-1006 adjusts from 170mm (6-3/4”) to 195mm (7-3/4”)
AF42-1007 adjusts from 195mm (7-3/4”) to 220mm (8-3/4”)
AF42-1008 adjusts from 220mm (8-3/4”) to 245mm (9-3/4”)
AF42-1009 adjusts from 245mm (9-3/4”) to 270mm (10-3/4”)
AF42-1010 adjusts from 270mm (10-3/4”) to 295mm (11-3/4”)
AF42-1011 adjusts from 295mm (11-3/4”) to 320mm (12-3/4”)
AF42-1012 adjusts from 320mm (12-3/4”) to 345mm (13-3/4”)
AF42-1349 linkage right hand 10-32 thread
AF42-1350 linkage left hand 10-32 thread
AF55-1004 Throttle ball assortment kit
4 balls, nuts & washers

Note: Allows 25.4mm (1”) further adjustment from shortest length

BLOWER TWIN CARB LINKAGE KIT

Aeroflow’s dual carb linkage kit is designed for dual carbs (non-dominator)
mounted sideways on top of a blower. AF42-1070 has high quality chrome
elite finish and AF42-1070BLK hand polished black anodised finished.
They features adjustable heim end design and needle bearings for longevity
and smooth throttle operation. Shafts and arms are splined to avert slipping.
Two extra-long studs are included to mount the lower cable bracket to the left
side of blower.

Part No Description
AF42-1070 Chrome Kit
AF42-1070BLK Black anodised kit

aeroflowperformance.com 199
 CARBURETTOR ACCESSORIES

GM KICK DOWN BRACKET

Part No Colour Suits
AF64-2300 Blue TH350, TH400, TH700
AF64-2300R Red TH350, TH400, TH700
AF64-2300BLK Black TH350, TH400, TH700
AF64-2300S Silver TH350, TH400, TH700
AF64-2300C Chrome TH350, TH400, TH700

NOTE: - Only suits AF64-2001 and AF64-2002

BILLET THROTTLE CABLE BRACKETS

Aeroflow’s billet throttle cable brackets are fully adjustable for different cable
lengths and bolt securely to the carburettor base.
They are machined for optional throttle return spring and allow users to BILLET
customize their throttle bracket for a higher degree of spring tension.
RETURN
Style Blue Red Black Silver SPRING
4150 AF64-2026 AF64-2026R AF64-2026BLK AF64-2026S ASSEMBLY
NOTE: - Optional return spring bracket (sold separately) is highly
recommended. Style Blue Red Black Silver
ENGINE COMPONENTS & ACCESSORIES

4150 AF64-2031 AF64-2031R AF64-2031BLK AF64-2031S

Replacement springs AF59-2031

BILLET TRANS BRACKET KICKDOWN TH700 KICK

To Suit Blue Red Black Silver DOWN LEVER
This lever allows you to mount your kickdown cable to your
GM AF64-2054 AF64-2054R AF64-2054BLK AF64-2054S
carburettor or EFI throttle body. Made from steel and coated
in black oxide.

Part No Description
AF72-5052 TH700 kick down lever

BILLET THROTTLE CABLE BRACKET

Part No Colour Suits
AF64-2001 Blue 4150 Silver
AF64-2001R Red 4150 Extensions come with
AF64-2001BLK Black 4150 2 jam nuts & 30mm stud
AF64-2001S Silver 4150
AF64-2001C Chrome 4150
Part No Description
AF64-2002 Blue 4500
AF64-2002R Red 4500 CABLE END EXTENSION (Thread 10/32 UNF)
AF64-2002BLK Black 4500 AF3500-2000 50.8mm (2”) Extension
AF64-2002S Silver 4500 AF3500-2001 76.2mm (3”) Extension
AF64-2002C Chrome 4500 AF3500-2002 101.6mm (4”) Extension
AF3500-2003 127mm (5”) Extension
NOTE: - Complete assembly mounts cable and return spring. AF3500-2004 152.4mm (6”) Extension

200 aeroflowperformance.com
 MORSE CABLES & ACCESSORIES

AF3500-1006
AF3500-1005

AF3500-1008 AF3500-1007

AF3500-1004

AF3500-1009

LIGHT WEIGHT MORSE CONTROL AF3500-1003

ENGINE COMPONENTS & ACCESSORIES

CABLES & ACCESSORIES
Aeroflow’s Lightweight morse cables are the perfect choice for controlled
pushing and pulling applications. Requiring very little effort, these cables
allow for 76mm (3”) of travel. The cables are fitted with effective dynamic AF3500-1013BLK
seals, making them well suited for use in extreme environments. A complete
circle of reinforcement wires support and protect the Teflon® inner liner,
ensuring negligible deflection during cable operation.
Aeroflow’s Lightweight black cables are assembled with a stainless steel AF3500-1000
solid wire core and feature 10/32 UNF threads at both ends of the cable AF3500-1002 AF3500-1001
assembly.
Perfect for custom fitments, Aeroflow’s lightweight cables are available in
a multitude of different lengths in both “clip-clip style” and “clip-threaded
Part No Description
bulkhead” mounting options. Aeroflow also offer a selection of quality
mounting hardware for correct installation. RELATED MORSE CABLE ACCESSORIES
AF3500-1003 Easy grip knob billet aluminium 10-32 UNF thread
AF3500-1004 T handle billet aluminium 10-32 UNF thread
Part No Total Length AF3500-1005 Quick release morse cable bracket 90° mild steel
AF3500-1006 Quick release morse cable bracket flat mild steel
MORSE CABLES BULKHEAD/CLIP COMBO (BLACK) AF3500-1007 Cable rod end 10-32 UNF 3/16” hole
AF3550-0300 91.5cm 3ft AF3500-1008 Cable rod end 10-32 UNF 1/4” hole
AF3550-0350 110cm 3ft 7-1/4” AF3500-1009 Quick release ball joint 10-32 UNF nut stainless steel
AF3550-0400 122cm 4ft AF3500-1013 Throttle stop, silver anodised (cut to length)
AF3550-0450 140cm 4ft 7-1/8” AF3500-1013BLK Throttle stop, black anodised (cut to length)
AF3550-0500 152.5cm 5ft
AF3550-0600 183cm 6ft STAINLESS THROTTLE BALLS (6.3mm (1/4”) ball size)
AF3550-0700 213cm 7ft AF3500-1000 10-24UNC with 9.52mm (3/8”) hex nut
AF3550-0800 244cm 8ft AF3500-1001 10-32UNF with 9.52mm (3/8”) hex nut
AF3550-0900 274cm 9ft AF3500-1002 1/4-28UNF with 11.11mm (7/16”) hex nut
AF3550-1000 305cm 10ft
AF3550-1100 335cm 11ft
AF3550-1200 366cm 12ft

MORSE CABLES CLIP/CLIP COMBO (BLACK)

AF3555-0300 91.5cm 3ft
AF3555-0350 110cm 3ft 7-1/4”
AF3555-0400 122cm 4ft
AF3555-0450 140cm 4ft 7-1/8”
AF3555-0500 152.5cm 5ft
AF3555-0600 183cm 6ft
AF3555-0700 213cm 7ft
AF3555-0800 244cm 8ft
AF3555-0900 274cm 9ft
AF3555-1000 305cm 10ft
AF3555-1100 335cm 11ft Part No Description
AF3555-1200 366cm 12ft
AF3555-1300 396cm 13ft
PRO GRIP CLIP STYLE MOUNTS
AF3555-1400 427cm 14ft
AF3500-1010 Billet half clamp
AF3555-1500 457cm 15ft
AF3500-1011 Billet full clamp
AF3555-1600 488cm 16ft
AF3500-1012 Billet dual full clamp
AF3555-1700 518cm 17ft
AF3555-1800 549cm 18ft
AF3555-2000 610cm 20ft

aeroflowperformance.com 201
 TIMING COVERS

HOLDEN (GM Australia)

BILLET TIMING COVER
To Suit Holden 253, 304, 308 & 355
Aeroflow have developed a billet timing cover especially for Holden V8
motors. The timing cover is CNC machined from T6061-6 billet aluminium CAST ALUMINIUM TIMING COVER
and is available in silver, black, red and blue. Timing covers include bolts and To Suit S/B CHEVY Pre-86
water pump gasket and adjustable timing tab. Timing cover gasket and seal
are sold separately. Dress up the front of your engine with one of Aeroflow’s cast alloy timing
Note: Front crank shaft seal NOT included covers. These covers come with gaskets, seals and bolts. These are
available in three great finishes; polished, chrome or black.
Part No Colour NOTE: Will not work with double row timing sets.

AF64-4358 Blue Part No Description Finish

AF64-4358R Red
AF64-4358BLK Black AF1850-1000 Timing Cover S/B Chevy Polished
AF64-4358S Silver AF1850-1001 Timing Cover S/B Chevy Black
AF1850-1002 Timing Cover S/B Chevy Chrome
AF1850-1003 Replacement gasket kit
ENGINE COMPONENTS & ACCESSORIES

BILLET TIMING COVER

To Suit 302 - 351 Cleveland
Aeroflow have developed a billet timing cover especially for Cleveland
motors. With the genuine Ford Cleveland cover now a discontinued item they
are still sought after by many engine builders all over the world. Aeroflow’s
timing cover is CNC machined from 6061-T6 billet aluminium.
Note: Front crank shaft seal NOT included

Part No Colour
AF64-2019 Blue
AF64-2019R Red
AF64-2019BLK Black
AF64-2019S Silver

2 PIECE BILLET TIMING COVER

To Suit V6 & Small Block V8 Chevy
Aeroflow performance products has developed a 2 piece billet timing cover
CNC machined from 6061-T6 Billet aluminium.
Includes gaskets, seals, cam locking plate, roller cam button and bolt kit.
Note: Front crank shaft seal NOT included. Suitable for use with double row
timing sets.
STAMPED STEEL TIMING COVER
To Suit S/B CHEVY Pre-86 Part No Colour
Dress up the front of your engine with one of Aeroflow’s timing covers. These AF64-4350 Blue
covers come with gaskets, seals and bolts. Also available are timing indicator AF64-4350R Red
tabs. Aeroflow’s timing covers and indicator tabs are available in two great AF64-4350BLK Black
finishes; chrome or black. Suitable for use with double row timing sets. AF64-4350S Silver
AF64-4350P Polished
Part No Description Finish AF64-4350C Chrome
AF1827-2000 Timing Cover S/B Chevy Chrome
AF1828-2000 Timing Cover S/B Chevy Black Replacement O-Ring AF59-4350

202 aeroflowperformance.com
 ENGINE ACCESSORIES

2 PIECE BILLET TIMING COVER

To Suit GM LS Series Chevy Engines
Aeroflow performance products has developed a 2 piece billet timing cover
CNC machined from 6061-T6 Billet aluminium. Designed to clear double row
timing chain and high volume oil pumps.
Recommended to use button head allen key bolts on all oil pumps to provide
maximum clearance.
Note: Front crank shaft seal NOT included

Part No Colour
AF64-4361 Blue
AF64-4361R Red
AF64-4361BLK Black
AF64-4361S Silver
AF64-4361P Polished
AF64-4361C Chrome
AF59-4361 Replacement mounting bolts and cam sensor plug

GM LS BOTTOM END GASKET SET

Let Aeroflow Performance supply the very best in engine gaskets for your
GM LS series build. This high calibre bottom end gasket set is intended to
service the bottom half of the engine block, essentially everything under the

ENGINE COMPONENTS & ACCESSORIES

cylinder heads. Keep your engine leak-free and running at peak efficiency by Oil pan gasket as included in AF1850-1020
replacing worn or blown-out gaskets. Conversion gasket sets or bottom end
sets include :
1 X Front crankshaft seal
1 X Rear main seal
1 X Camshaft retaining plate gasket
1 X Front timing cover gasket
1 X Rear main plate gasket
1 X Oil pan gasket
1 X Oil pan drain plug washer
2 X Oil pump inlet O-ring
2 X Oil cooler block-off gasket
4 X Water pump gaskets

Part No Description
AF1850-1020 Bottom end gasket kit as above

AF1850-1004 LS timing cover KIT

AF1850-1016 LS timing cover GASKET ONLY
AF1850-1014 LS oil pan kit
AF1850-1015 LS rear main seal kit
AF1850-1017 LS water pump gasket kit

AF1850-1015

AF1850-1004

AF1850-1016

AF1850-1017

BILLET TIMING POINTERS Application Blue Black Silver Red Chrome

Suits billet/stock style timing SBF 10 O’clock AF64-2079 AF64-2079BLK AF64-2079S AF64-2079R AF64-2079C
covers SBF 11 O’clock AF64-2046 AF64-2046BLK AF64-2046S AF64-2046R AF64-2046C
SBC 158.75mm (6-1/4”) AF64-2052 AF64-2052BLK AF64-2052S AF64-2052R AF64-2052C
Aeroflow’s timing pointers are adjustable up to 4 degrees SBC 162mm (6-3/8”) AF64-2050 AF64-2050BLK AF64-2050S AF64-2050R AF64-2050C
and are made from 6061-T6 billet aluminium. Mounting SBC 177.8mm (7”) AF64-2049 AF64-2049BLK AF64-2049S AF64-2049R AF64-2049C
hardware is included and they are available in bright SBC 184.15mm (7-1/4”) AF64-2047 AF64-2047BLK AF64-2047S AF64-2047R AF64-2047C
anodized blue, black, silver and red. SBC 203.2mm (8”) AF64-2053 AF64-2053BLK AF64-2053S AF64-2053R AF64-2053C
BBC 158.75mm (6-1/4”) AF64-2051 AF64-2051BLK AF64-2051S AF64-2051R AF64-2051C
NOTE: NOT compatible with BBC 184.15mm (7-1/4”) AF64-2048 AF64-2048BLK AF64-2048S AF64-2048R AF64-2048C
8” SBC Scat balancers. BBC 203.2mm (8”) AF64-2099 AF64-2099BLK AF64-2099S AF64-2099R AF64-2099C

aeroflowperformance.com 203
 ENGINE ACCESSORIES

BILLET FUEL PUMP BLOCK OFF PLATES

Aeroflow’s fuel pump block-off plates are used to seal the opening in the
engine block whenever a mechanical fuel pump is not used. Each plate
includes stainless steel bolts.

Blue Red Black Silver Chrome

BILLET TIMING POINTER Suits 302 - 351 CLEVELAND
AF64-2020 AF64-2020R AF64-2020BLK AF64-2020S AF64-2020C
To Suit 302 - 351 Cleveland
Suits BB CHEVY, CHRYSLER SB & BB, FORD SB WINDSOR
Blue Red Black Silver AF64-2027 AF64-2027R AF64-2027BLK AF64-2027S AF64-2027C
AF64-2040 AF64-2040R AF64-2040BLK AF64-2040S
Suits SB CHEVY
AF64-2028 AF64-2028R AF64-2028BLK AF64-2028S AF64-2028C

Suits HOLDEN (GM Australia) V8

AF64-2029 AF64-2029R AF64-2029BLK AF64-2029S AF64-2029C
ENGINE COMPONENTS & ACCESSORIES

NOTE: Includes
1/2” square drive

STEEL TIMING POINTER

Aeroflow timing indicator tabs suit standard
and Aeroflow stamped steel timing covers. HARMONIC BALANCER BOLT
Part No Colour Description TO SUIT CHEVY
Aeroflow’s heavy-duty high strength Chev Balancer bolt kit is the best
AF1827-2001 Chrome Suits small block Chevy way to bolt on your balancer. This kit has a perfectly flat thick washer to
AF1828-2001 Black Suits small block Chevy spread the fastening load over a greater surface area. It also features a
bolt that can accept a standard 12.7mm (1/2”) drive ratchet or breaker bar
to rotate the crank assembly. Torque to 60ft lbs

Part No Colour Description

AF37-0010 Black Suits SBC Balancer Retaining Bolt

FORD CAM
CAM THRUST BUTTON’S THRUST PLATES
Cam Buttons limit lateral movement of the camshaft in engines without cam
thrust plates and reduce friction for “FREE” Horsepower! Machining of the
cam sprocket may be required. Available in Nylon and Steel Roller. Part No Finish Description
Part No Description AF463-00 Raw steel Suits 302-351 Cleveland
1045 carbon Steel replacement
AF64-4351 Roller cam button suits Small block chevy
for production
AF64-4352 Roller cam button suits Big block chevy
cast iron thrust plate.
AF64-4354 Nylon cam button suits Small block chevy
AF463-04 Raw steel Suits 289 - 351 Windsor
AF64-4355 Nylon cam button suits Big block chevy
1045 carbon Steel replacement
for production
cast iron thrust plate.

204 aeroflowperformance.com
 ENGINE ACCESSORIES

CHEVROLET
CAM LOCKING BL
K
05
PLATE AF
6 4-2
1

& BOLT KIT

105
4-2
Part No Finish Description AF6

AF463-50 Black Suits small block & big block Chevy

Includes grade 8 bolts K
BL
2 109
64-
AF
9
10
6 4-2
AF

K
BL
110
64-2
AF
110
64-2
AF
GM LS SERIES WELSH PLUG KIT

ENGINE COMPONENTS & ACCESSORIES

The Aeroflow Performance LS series welsh plug kit is a necessity when re-
building your ls series engine. The kit includes all brass welsh plugs required,
including a new barbell which is now made from 6061 aluminium. The new
hi-flow billet barbell replaces the factory plastic barbell which can become
brittle and fatigue over time. B LK
111
64-2
Part No Description AF
1
211
AF64-2125 Complete welsh plug kit with barbell 64-
AF64-2132 Replacement billet barbell ONLY AF

K
2 BL 12
11 -21
64-2 64
AF AF

SPECIFIC ENGINE DIPSTICKS

Aeroflow’s Flexible Engine Dipsticks are 308 stainless steel braided covering
over a hard-wearing high quality PTFE liner. The handle and ends are made
from 6061-T6 then hand polished and chrome plated or black anodised. A
double o-ring seal keeps dipstick secured in tube and prevents crankcase
gasses from escaping. These not only look great but the flexible inner
dipstick is marked to give accurate oil level readings.
UNIVERSAL ENGINE DIPSTICKS
Aeroflow Performance universal engine oil dipstick is designed to work with Part No Finish Description
oil pans that have a built in 1/4” NPT fitting or can be used in any custom
application with the use of a 1/4” NPT weld-on. It has an overall length of AF64-2105 Chrome Holden V8 253-308
20.75” ( 527mm ) which can be cut down to suit most custom applications. AF64-2105BLK Black Holden V8 253-308
Just like a range of dipstick it features 308 stainless steel braided covering AF64-2110 Chrome SBC, early model, passengers side.
over PTFE liner, billet handles and the double O-rings for extra security AF64-2110BLK Black SBC, early model, passengers side.
against crankcase gasses escaping. Available in chrome or black anodised. AF64-2109 Chrome SBC, late model, drivers side.
AF64-2109BLK Black SBC, late model, drivers side.
AF64-2111 Chrome LS Series Chevy (block mount)
Part No Description AF64-2111BLK Black LS Series Chevy (block mount)
AF64-2123 Chrome universal dipstick AF64-2112 Chrome Ford 302 - 351C
AF64-2123BLK Black universal dipstick AF64-2112BLK Black Ford 302 - 351C

aeroflowperformance.com 205
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS

The Aeroflow Series of Aluminium Cylinder Heads are taking affordable performance street and strip cylinder heads to the next level. These heads utilise
ultra-smooth A356-T6 aluminium castings, new as-cast runner and chamber designs produce excellent flow numbers. This combined with a 5-angle
competition valve job, diamond-honed bronze guides, hand bowl blending and professional assembly help to outperform some of the best brands in the
business. Complete assemblies include valves, valve springs, retainers & locks, guide plates and 7/16” rocker studs (Chrysler heads do not include guide
plates or rocker studs). Aeroflow cylinder heads also available in bare configurations and in cast or CNC ported options..

AF95-0327 AF95-2327

ALUMINIUM CYLINDER HEADS TO SUIT

CHEVY SMALL BLOCK 186cc
Specificaons
Material A356 Aluminum
The Aeroflow Performance small block Chevy cylinder heads are designed for
entry level street performance engines to give the ultimate in flow at a budget Combus‚on Chamber CC 67cc
price. Made from A356 aluminium castings the 186cc cylinder heads are ideal Intake Port Volume CC 186cc
for operating in the idle to 6500 rpm range. These complete cylinder heads will
fit a 4.00” bore and larger. The complete heads include larger then stock 1.43” Intake Port Dimension 2.00" x 1.20"
( 36.3mm ) diameter dual valve spring to handle up to 0.575” ( 14.61mm ) Exhaust Port Volume CC 72cc
maximum lift. Suits flat tappet and hydraulic camshafts.
Exhaust Port Dimension 1.42"H x 1.53"W
ENGINE COMPONENTS & ACCESSORIES

Part No Description Spark Plug Loca‚on Straight

AF95-0327 BARE (sold in pairs) Intake Valve Diameter 2.02"
AF95-2327 COMPLETE (sold in pairs) Exhaust Valve Diameter 1.60"
Valve Stem Diameter 11/32" (.343")
Valve Spring Pocket I.D. 1.49"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.530" (.570" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 23 Degree
Deck Thickness 0.625"

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 61.700 Exhaust 0.100 0.063 44.800
Intake 0.200 0.099 123.700 Exhaust 0.200 0.125 92.800
Intake 0.300 0.149 177.700 Exhaust 0.300 0.188 135.300
Intake 0.400 0.198 223.400 Exhaust 0.400 0.250 151.600
Intake 0.500 0.248 251.100 Exhaust 0.500 0.313 158.900
Intake 0.600 0.297 254.000 Exhaust 0.600 0.375 161.900
Intake 0.700 0.347 255.600 Exhaust 0.700 0.438 165.300

Suggested Components Hydraulic Flat Tappet Cam (up to .575” li)

Head Gasket Fel-Pro 1003 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 1.20 x 2.00 port size gasket ) Fel-Pro 1204 Intake Valves 2.02” x 4.91” x 11/32” AF59-3501
Exhaust Gasket Exhaust Valves 1.60” x 4.91” x 11/32” AF59-3502
( 1.34 x 1.39 D port size gasket ) Fel-Pro 1406 Valve Springs 1.43” Single w/damper AF59-3503
Head Bolts ARP 134-3601/134-3701 Valve Retainers 7-Degree 11/32” AF59-3504
Head Studs ARP 134-4001/234-4301 Valve Locks 7-Degree 11/32” AF59-3505
Spark Plugs Valve Seals 11/32” x .530”
( 14mm x 3/4" reach Rocker Arm Studs 11/32” x .530” AF59-3506
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3507

206 aeroflowperformance.com
 CYLINDER HEADS

AF95-0350

ALUMINIUM CYLINDER HEADS TO SUIT

CHEVY SMALL BLOCK 204cc
The Aeroflow Performance small block Chevy cylinder heads are designed for
entry level street performance engines to give the ultimate in flow at a budget
price. Made from A356 aluminium castings the 204cc cylinder heads are ideal
for operating in the idle to 6500 rpm range. These complete cylinder heads will
fit a 4.00” bore and larger. The complete heads include larger then stock 1.43”
Specificaons
( 36.3mm ) diameter dual valve spring to handle up to 0.575” Material A356 Aluminum
( 14.61mm ) maximum lift. Suits flat tappet and hydraulic camshafts. Combus‚on Chamber CC 67cc
Part No Description Intake Port Volume CC 204cc
AF95-0350 BARE (sold in pairs) Intake Port Dimension 2.22" x 1.31"
AF95-2350 COMPLETE (sold in pairs)
Exhaust Port Volume CC 70cc

ENGINE COMPONENTS & ACCESSORIES

Exhaust Port Dimension 1.34"H x 1.39"W
Spark Plug Loca‚on Straight
Intake Valve Diameter 2.02"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 11/32" (.343")
Valve Spring Pocket I.D. 1.49"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.530" (.570" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 23 Degree
Deck Thickness 0.625"

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 63.400 Exhaust 0.100 0.063 50.300
Intake 0.200 0.099 122.800 Exhaust 0.200 0.125 100.600
Intake 0.300 0.149 178.000 Exhaust 0.300 0.188 140.200
Intake 0.400 0.198 226.400 Exhaust 0.400 0.250 155.800
Intake 0.500 0.248 259.800 Exhaust 0.500 0.313 161.000
AF95-2350
Intake 0.600 0.297 260.900 Exhaust 0.600 0.375 163.400
Intake 0.700 0.347 261.200 Exhaust 0.700 0.438 164.600

Suggested Components Hydraulic Flat Tappet Cam (up to .575” li)

Head Gasket Fel-Pro 1003 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 1.31 x 2.22 port size gasket ) Fel-Pro 1206 Intake Valves 2.02” x 4.91” x 11/32” AF59-3501
Exhaust Gasket Exhaust Valves 1.60” x 4.91” x 11/32” AF59-3502
( 1.34 x 1.39 D port size gasket ) Fel-Pro 1406 Valve Springs 1.43” Single w/damper AF59-3503
Head Bolts ARP 134-3601/134-3701 Valve Retainers 7-Degree 11/32” AF59-3504
Head Studs ARP 134-4001/234-4301 Valve Locks 7-Degree 11/32” AF59-3505
Spark Plugs Valve Seals 11/32” x .530”
( 14mm x 3/4" reach Rocker Arm Studs 11/32” x .530” AF59-3506
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3507

aeroflowperformance.com 207
 CYLINDER HEADS

AF95-2400

ALUMINIUM CYLINDER HEADS TO SUIT

CHEVY SMALL BLOCK 212cc
The Aeroflow Performance small block Chevy cylinder heads are designed for
street / race performance engines to give the ultimate in flow at a competitive
price. Made from A356 aluminium castings these 212cc cylinder heads are
ideal for operating in the idle to 7500 rpm range. These complete cylinder Specificaons
heads will fit a 4.00” bore and larger. The complete heads include larger then
stock 1.57” ( 40mm ) diameter dual valve spring to handle up to 0.625”
Material A356 Aluminum
( 15.87mm ) maximum lift. Suits solid and hydraulic roller camshafts. Combus‚on Chamber CC 66cc
Part No Description Intake Port Volume CC 212cc
Intake Port Dimension 2.21" x 1.30"
AF95-0400 BARE (sold in pairs)
AF95-2400 COMPLETE (sold in pairs) Exhaust Port Volume CC 72cc
Exhaust Port Dimension 1.42"H x 1.53"W
Exhaust Port Loca‚on Raised (.250”)
ENGINE COMPONENTS & ACCESSORIES

Spark Plug Loca‚on Angled

Intake Valve Diameter 2.08"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 8mm (.313")
Valve Spring Pocket I.D. 1.57"
Valve Guide Material Bronze
Valve Guide O.D. 0.502" (.560" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 23 Degree
Deck Thickness .750”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.048 64.900 Exhaust 0.100 0.063 61.400
Intake 0.200 0.096 132.500 Exhaust 0.200 0.125 114.500
Intake 0.300 0.144 191.000 Exhaust 0.300 0.188 147.000
Intake 0.400 0.192 238.200 Exhaust 0.400 0.250 173.900
Intake 0.500 0.240 267.000 Exhaust 0.500 0.313 192.900
Intake 0.600 0.288 279.100 Exhaust 0.600 0.375 204.500
Intake 0.700 0.337 282.900 Exhaust 0.700 0.438 212.300

Suggested Components Hydraulic Roller Cam (up to .625” li)

Head Gasket Fel-Pro 1003 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 1.34 x 2.21 port size gasket ) Fel-Pro 1206 Intake Valves 2.08” x 5.00” x 8mm
Exhaust Gasket Exhaust Valves 1.60” x 5.03” x 8mm
( 1.55 x 1.55 D port size gasket ) Fel-Pro 1405 Valve Springs 1.57” Dual Springs
Head Bolts ARP 134-3601/134-3701 Valve Retainers 10-Degree
Head Studs ARP 134-4001/234-4301 Valve Locks 10-Degree 8mm
Spark Plugs Valve Seals 8mm x .502” Viton
( 14mm x 3/4" reach Rocker Arm Studs 7/16”-14 x 7/16”-24 AF59-3506
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3507

208 aeroflowperformance.com
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

CHEVY SMALL BLOCK CNC 213cc
The Aeroflow Performance small block Chevy cylinder heads are designed for
street / race performance engines to give the ultimate in flow at a competitive
price. Made from A356-T6 aluminium castings they feature full CNC ports and
are ideal for operating in the idle to 7500 rpm range. These complete cylinder
heads will fit a 4.00” bore and larger. They include larger then stock 1.57”
( 40mm ) diameter dual valve spring to handle up to 0.625” ( 15.87mm )
Suits mechanical and hydraulic roller camshafts.
Specificaons
Part No Description
Material A356 Aluminum
AF95-0401 BARE (sold in pairs)
AF95-2401 COMPLETE (sold in pairs) Combus‚on Chamber CC 68cc
Intake Port Volume CC 213cc
Intake Port Dimension 2.15" x 1.30"
Exhaust Port Volume CC 82cc

ENGINE COMPONENTS & ACCESSORIES

Exhaust Port Dimension 1.45"H x 1.50"W
Spark Plug Loca‚on Straight
Intake Valve Diameter 2.08"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 8mm (.313”)
Valve Spring Pocket I.D. 1.57"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.502" (.560" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 23 Degree
Deck Thickness 0.625"

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.048 68.500 Exhaust 0.100 0.063 55.200
Intake 0.200 0.096 129.900 Exhaust 0.200 0.125 104.200
Intake 0.300 0.144 185.700 Exhaust 0.300 0.188 148.000
Intake 0.400 0.192 236.200 Exhaust 0.400 0.250 183.400
Intake 0.500 0.240 268.200 Exhaust 0.500 0.313 210.000
Intake 0.600 0.288 287.700 Exhaust 0.600 0.375 227.300
Intake 0.700 0.337 297.100 Exhaust 0.700 0.438 238.900

Suggested Components Hydraulic Roller Cam (up to .625” li)

Head Gasket Fel-Pro 1003 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 1.30 x 2.15 port size gasket ) Fel-Pro 1206 Intake Valves 2.08” x 5.00” x 8mm
Exhaust Gasket Exhaust Valves 1.60” x 5.03” x 8mm
( 1.45 x 1.50 port size gasket ) Fel-Pro 1405 Valve Springs 1.57” Dual spring
Head Bolts ARP 134-3601/134-3701 Valve Retainers 10-Degree
Head Studs ARP 134-4001/234-4301 Valve Locks 10-Degree 8mm
Spark Plugs Valve Seals 8mm x .502” Viton
( 14mm x 3/4" reach Rocker Arm Studs 7/16“-14 x 7/16”-24 AF59-3506
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3507

aeroflowperformance.com 209
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

CHEVY BIG BLOCK 320cc
The Aeroflow Performance big block Chevy cylinder heads are designed for
street / race performance engines to give the ultimate in flow at a competitive
price. These heads flow 364cfm! Best suited for high revving 454, or 502ci up
Big Blocks. Made from A356 aluminium castings these 320cc cylinder heads
are ideal for operating in the idle to 6750 rpm range. The complete heads
include larger then stock 1.625” ( 41mm ) diameter dual valve spring to handle
up to 0.850” ( 21.5mm ). Suits flat tappet and hydraulic camshafts.
Specificaons
Part No Description Material A356 Aluminum
Combus‚on Chamber CC 120cc
AF95-0427 BARE (sold in pairs)
AF95-2427 COMPLETE (sold in pairs) Intake Port Volume CC 320cc
Intake Port Dimension 2.45" x 1.75"
Exhaust Port Volume CC 125cc
Exhaust Port Dimension 1.75"H x 2.00"W
Exhaust Port Loca‚on Raised .375”
ENGINE COMPONENTS & ACCESSORIES

Spark Plug Loca‚on Angled

Intake Valve Diameter 2.25"
Exhaust Valve Diameter 1.88"
Valve Stem Diameter 11/32" (.343")
Valve Spring Pocket I.D. 1.735"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.530" (.570" at base)
Rocker Stud Thread Size 7/16"-14
Valve Angle 24o Intake/15o Exhaust
Deck Thickness 0.750"

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.044 76.900 Exhaust 0.100 0.053 70.400
Intake 0.200 0.089 153.400 Exhaust 0.200 0.106 121.000
Intake 0.300 0.133 266.600 Exhaust 0.300 0.159 154.200
Intake 0.400 0.178 286.000 Exhaust 0.400 0.212 188.100
Intake 0.500 0.222 327.700 Exhaust 0.500 0.265 217.900
Intake 0.600 0.267 349.200 Exhaust 0.600 0.318 244.800
Intake 0.700 0.311 356.400 Exhaust 0.700 0.371 259.700
Intake 0.800 0.356 363.800 Exhaust 0.800 0.424 262.100

Suggested Components Hydraulic Roller Cam (up to .850” li)

Head Gasket (Mark IV) Fel-Pro 1017-01 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 2.45 x 1.75 port size gasket ) Fel-Pro 1275 Intake Valves 2.25” x 5.49” x 11/32” AF59-4271
Exhaust Gasket Exhaust Valves 1.88” x 5.42” x 11/32” AF59-4272
( 1.75 x 2.0 port size gasket ) Fel-Pro 1411 Valve Springs 1.625” Dual spring AF59-4273
Head Bolts (Mark IV) ARP 135-3610 Valve Retainers 10-Degree AF59-4274
Head Studs ARP 235-4018 Valve Locks 10-Degree 11/32” AF59-4275
Spark Plugs Valve Seals 11/32” x .530”
( 14mm x 3/4" reach Rocker Arm Studs 7/16“-14 x 7/16”-20 AF59-4276
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 3/8” raised (OE Style) AF59-4277

210 aeroflowperformance.com
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

GM LS 276cc
The Aeroflow Performance LS3 Chevy cylinder heads are designed for street
/ race performance engines to give the ultimate in flow at a competitive price.
Made from A356 aluminium castings these 15 Degree Rectangle Port heads
Specificaons
are designed to fit LS large bore engines. These bare 276cc heads accept
2.165” ( 55mm ) diameter intake valves and 1.60” ( 40.64mm ) exhaust valves.
Material A356 Aluminum
Available in OE 4 bolt design or 6 bolt design to suit standard or LSX block Combus on Chamber CC 68cc
designs. Note: Thread sealant must be used on all rocker bolts as threads
Intake Port Volume CC 276cc
intersect with intake ports.
Intake Port Dimension 1.285" x 2.60"
Part No Description Exhaust Port Volume CC 90cc
AF95-0407 ( 4BOLT) Exhaust Port Dimension 1.47"H x 1.64"W
AF95-0408 ( 6BOLT )
Spark Plug Loca on OE Stock

ENGINE COMPONENTS & ACCESSORIES

Intake Valve Diameter 2.165” x 4.89"
Exhaust Valve Diameter 1.59" x 4.91”
Valve Stem Diameter 8mm
Valve Spring Pocket I.D. 1.30"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.502" (.560" at base)
Rocker Design LS3 Rails required
Valve Angle 15 Degree
Deck Thickness .625”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.046 74.100 Exhaust 0.100 0.063 57.400
Intake 0.200 0.092 150.300 Exhaust 0.200 0.125 110.700
Intake 0.300 0.139 213.800 Exhaust 0.300 0.188 152.900
Intake 0.400 0.185 265.800 Exhaust 0.400 0.251 190.500
Intake 0.500 0.231 296.600 Exhaust 0.500 0.313 210.000
Intake 0.600 0.277 323.000 Exhaust 0.600 0.376 219.900
Intake 0.700 0.323 332.100 Exhaust 0.700 0.439 228.100
Intake 0.750 0.346 332.100 Exhaust 0.750 0.47 231.000

(Check Cam Manufacturer Recommenda on)

Installed Components Sizes
Intake Valves 2.165” x 4.89”
Exhaust Valves 1.59” x 4.91”
Valve Springs
Valve Retainers
Valve Locks 8mm
Spark Plugs Champion RC12YC
Rocker Design 15 degree LS3
Push Rod Guide Plates 3/8” Raised (OE style)

aeroflowperformance.com 211
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

GM LS CNC 276cc
The Aeroflow Performance LS3 Chevy cylinder heads are designed for street
/ race performance engines to give the ultimate in flow at a competitive price.
Made from A356-T6 aluminium castings they feature full CNC ports and
combustion chamber, 15 degree rectangle ports that are designed to fit LS
Specificaons
large bore engines. These bare 276cc heads accept 2.165” ( 55mm ) diameter Material A356 Aluminum
intake valves and 1.59” ( 40.64mm ) exhaust valves. Available in OE 4 bolt
design or 6 bolt design to suit standard or LSX block designs. Note: Thread
Combus on Chamber CC 68cc
sealant must be used on all rocker bolts as threads intersect with intake ports. Intake Port Volume CC 276cc
Intake Port Dimension 1.30" x 2.61"
Part No Description Exhaust Port Volume CC 92cc
Exhaust Port Dimension 1.475"H x 1.65"W
AF95-0415 ( 4BOLT)
AF95-0416 ( 6BOLT ) Spark Plug Loca on OE Stock
ENGINE COMPONENTS & ACCESSORIES

Intake Valve Diameter 2.165” x 4.89"

Exhaust Valve Diameter 1.59" x 4.91”
Valve Stem Diameter 8mm
Valve Spring Pocket I.D. 1.30"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.502" (.560" at base)
Rocker Design LS3 Rails required
Valve Angle 15 Degree
Deck Thickness .625”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.046 74.100 Exhaust 0.100 0.063 56.100
Intake 0.200 0.092 160.000 Exhaust 0.200 0.125 119.100
Intake 0.300 0.139 209.700 Exhaust 0.300 0.188 169.800
Intake 0.400 0.185 262.100 Exhaust 0.400 0.251 212.100
Intake 0.500 0.231 302.100 Exhaust 0.500 0.313 238.900
Intake 0.600 0.277 323.100 Exhaust 0.600 0.376 251.000
Intake 0.700 0.323 337.600 Exhaust 0.700 0.439 258.700
Intake 0.750 0.346 343.300 Exhaust 0.750 0.47 260.500

(Check Cam Manufacturer Recommenda on)

Installed Components Sizes
Intake Valves 2.165” x 4.89”
Exhaust Valves 1.59” x 4.91”
Valve Springs
Valve Retainers
Valve Locks
Spark Plugs Champion RC12YC
Rocker Design 15 degree LS3
Push Rod Guide Plates 3/8” Raised (OE style)

212 aeroflowperformance.com
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

FORD SMALL BLOCK WINDSOR 175cc
The Aeroflow Performance small block Ford Windsor cylinder heads are
designed for street performance engines to give the ultimate in flow at a
budget price. Made from A356 aluminium castings the 175cc cylinder heads
are ideal for operating in the idle to 6500 rpm range. The complete heads
Specificaons
include larger then stock 1.46” ( 37mm ) diameter dual valve spring to handle Material A356 Aluminum
.525” lift. Suits flat tappet camshaft.
Combus‚on Chamber CC 61cc
Intake Port Volume CC 175cc
Part No Description
Intake Port Dimension 2.00" x 1.18"
AF95-0302 BARE (sold in pairs)
AF95-2302 COMPLETE (sold in pairs) Exhaust Port Volume CC 66cc
Exhaust Port Dimension 1.32"H x 1.27"W
Spark Plug Loca‚on Angled

ENGINE COMPONENTS & ACCESSORIES

Intake Valve Diameter 2.02"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 11/32” (.343")
Valve Spring Pocket I.D. 1.49"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.530" (.570" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 20 Degree
Deck Thickness .625”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 62.000 Exhaust 0.100 0.063 50.000
Intake 0.200 0.099 118.900 Exhaust 0.200 0.125 99.600
Intake 0.300 0.149 166.800 Exhaust 0.300 0.188 136.300
Intake 0.400 0.198 214.300 Exhaust 0.400 0.250 156.800
Intake 0.500 0.248 247.800 Exhaust 0.500 0.313 168.200
Intake 0.600 0.297 267.600 Exhaust 0.600 0.375 171.700
Intake 0.650 0.322 267.700 Exhaust 0.650 0.406 172.800

Suggested Components Hydraulic Flat Tappet Cam (up to .525” li)

Head Gasket Fel-Pro 1011-1 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 1.18 x 2.00 port size gasket ) Fel-Pro 1250 Intake Valves 2.02” x 4.91” x 11/32” AF59-3021
Exhaust Gasket Exhaust Valves 1.60” x 4.93” x 11/32” AF59-3022
(1.32 x 1.27 Square port gasket) Fel-Pro 1415 Valve Springs 1.46” Single w/damper AF59-3023
Head Bolts ARP 154-3605 (7/16”) Valve Retainers 1.25” 7-degree 11/32” AF59-3024
ARP 154-3603 (1/2”)
Valve Locks 7-degree 11/32” AF59-3025
Head Studs ARP 154-4003 Valve Seals 11/32” x .530” Viton
Spark Plugs ( 14mm x 3/4" reach Rocker Arm Studs 7/16”-14 x 3/8”-24 AF59-3026
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3027

aeroflowperformance.com 213
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

FORD SMALL BLOCK WINDSOR 185cc
The Aeroflow Performance small block Ford Windsor cylinder heads are
designed for street / race performance engines to give the ultimate in flow
at a budget price. Made from A356 aluminium castings the 185cc cylinder
heads are ideal for operating in the idle to 6500 rpm range. The complete
Specificaons
heads include larger then stock 1.32” ( 33.5mm ) diameter dual valve spring to Material A356 Aluminum
handle up to 0.600” ( 15.25mm ) maximum lift. Suits flat tappet and hydraulic
camshaft. Combus‚on Chamber CC 58cc
Intake Port Volume CC 185cc
Part No Description
Intake Port Dimension 2.10" x 1.25"
AF95-0347 BARE (sold in pairs)
AF95-2347 COMPLETE (sold in pairs) Exhaust Port Volume CC 63cc
Exhaust Port Dimension 1.35"H x 1.35"W
ENGINE COMPONENTS & ACCESSORIES

Spark Plug Loca‚on OEM

Intake Valve Diameter 2.02"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 8mm
Valve Spring Pocket I.D. 1.55”
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.500" (.560" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 20 Degree
Deck Thickness .750”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 64.000 Exhaust 0.100 0.063 55.500
Intake 0.200 0.099 127.200 Exhaust 0.200 0.125 102.600
Intake 0.300 0.149 184.500 Exhaust 0.300 0.188 142.500
Intake 0.400 0.198 230.500 Exhaust 0.400 0.250 166.200
Intake 0.500 0.248 264.200 Exhaust 0.500 0.313 177.900
Intake 0.600 0.297 281.900 Exhaust 0.600 0.375 185.500
Intake 0.700 0.347 279.200 Exhaust 0.700 0.438 188.600

Suggested Components Hydraulic Roller Cam (up to .600” li)

Head Gasket Fel-Pro 1011-1 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 2.10 x 1.25 port size gasket ) Fel-Pro 1262 Intake Valves 2.02” x 4.90” x 8mm AF59-3028
Exhaust Gasket Exhaust Valves 1.60” x 4.95” x 8mm AF59-3029
( 1.35 x 1.35 port size gasket ) Fel-Pro 1415 Valve Springs 1.32” Dual Springs
Head Bolts ARP 154-3605(7/16”) Valve Retainers 10-Degree 8mm
ARP 154-3603(1/2”) Valve Locks 10-Degree 8mm
Head Studs ARP 154-4003 (1/2”) Valve Seals 8mm x .502” Viton
Spark Plugs (14mm x 3/4" reach Rocker Arm Studs 7/16”-14 x 7/16”-24 AF59-3026
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3027

214 aeroflowperformance.com
 CYLINDER HEADS

AF95-0348
AF95-2348

ALUMINIUM CYLINDER HEADS TO SUIT

FORD SMALL BLOCK WINDSOR CNC 185cc
The Aeroflow Performance small block Ford Windsor cylinder heads are
designed for street / race performance engines to give the ultimate in flow at
a budget price. Made from A356 aluminium castings with fully CNC’d ports
and combustion chambers. The 185cc cylinder heads are ideal for operating
Specificaons
in the idle to 6500 rpm range. The complete heads include larger then stock Material A356 Aluminum
1.32” ( 33.5mm ) diameter dual valve spring to handle up to 0.600” ( 15.25mm
) maximum lift. Suits flat tappet and hydraulic camshaft. Combus‚on Chamber CC 58cc
Intake Port Volume CC 185cc
Part No Description
Intake Port Dimension 2.10" x 1.25"
AF95-0348 BARE (sold in pairs)
AF95-2348 COMPLETE (sold in pairs) Exhaust Port Volume CC 63cc
Exhaust Port Dimension 1.35"H x 1.35"W
Spark Plug Loca‚on OEM

ENGINE COMPONENTS & ACCESSORIES

Intake Valve Diameter 2.02"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 8mm
Valve Spring Pocket I.D. 1.55”
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.500" (.560" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 20 Degree
Deck Thickness .750”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 68.2 Exhaust 0.100 0.063 58.4
Intake 0.200 0.099 121.7 Exhaust 0.200 0.125 112.6
Intake 0.300 0.149 179.8 Exhaust 0.300 0.188 163.4
Intake 0.400 0.198 229.3 Exhaust 0.400 0.250 201.6
Intake 0.500 0.248 261.7 Exhaust 0.500 0.313 219.7
Intake 0.600 0.297 279.3 Exhaust 0.600 0.375 226
Intake 0.700 0.347 284.8 Exhaust 0.700 0.438 229

Suggested Components Hydraulic Roller Cam (up to .600” li)

Head Gasket Fel-Pro 1011-1 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 2.10 x 1.25 port size gasket ) Fel-Pro 1262 Intake Valves 2.02” x 4.90” x 8mm AF59-3028
Exhaust Gasket Exhaust Valves 1.60” x 4.95” x 8mm AF59-3029
( 1.35 x 1.35 port size gasket ) Fel-Pro 1415 Valve Springs 1.32” Dual Springs
Head Bolts ARP 154-3605(7/16”) Valve Retainers 10-Degree 8mm
ARP 154-3603(1/2”) Valve Locks 10-Degree 8mm
Head Studs ARP 154-4003 (1/2”) Valve Seals 8mm x .502” Viton
Spark Plugs (14mm x 3/4" reach Rocker Arm Studs 7/16”-14 x 7/16”-24 AF59-3026
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3027

aeroflowperformance.com 215
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

FORD SMALL BLOCK WINDSOR 205cc
The Aeroflow Performance small block Ford Windsor cylinder heads are
designed for street / race performance engines to give the ultimate in flow at Specificaons
a competitive price. Made from A356 aluminium castings the 205cc cylinder
heads are ideal for operating in the idle to 7500 rpm range. The complete Material A356 Aluminum
heads include larger then stock 1.575” ( 40mm ) diameter dual valve spring to Combus‚on Chamber CC 58cc
handle up to 0.710” ( 18mm ) maximum. Suits hydraulic roller camshafts.
Intake Port Volume CC 203cc
Description Intake Port Dimension 2.13" x 1.28"
Part No
Exhaust Port Volume CC 71cc
AF95-0360 BARE (sold in pairs)
AF95-2360 COMPLETE (sold in pairs) Exhaust Port Dimension 1.40"H x 1.40"W
Exhaust Port Loca‚on Raised .250”
Spark Plug Loca‚on OEM
ENGINE COMPONENTS & ACCESSORIES

Intake Valve Diameter 2.08"

Exhaust Valve Diameter 1.60"
Valve Stem Diameter 8mm
Valve Spring Pocket I.D. 1.64”
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.490" (.560" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 20 Degree
Deck Thickness .750”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.048 70.000 Exhaust 0.100 0.063 59.400
Intake 0.200 0.096 134.700 Exhaust 0.200 0.125 114.200
Intake 0.300 0.144 191.300 Exhaust 0.300 0.188 160.600
Intake 0.400 0.192 246.200 Exhaust 0.400 0.250 194.100
Intake 0.500 0.240 285.600 Exhaust 0.500 0.313 212.000
Intake 0.600 0.288 299.800 Exhaust 0.600 0.375 219.600
Intake 0.700 0.337 300.100 Exhaust 0.700 0.439 224.300

Suggested Components Hydraulic Roller Cam (up to .710” li)

Head Gasket Fel-Pro 1011-1 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes Part No
( 1.28 x 2.13 port size gasket ) Fel-Pro 1262 Intake Valves 2.08” x 5.00” x 8mm AF59-3030
Exhaust Gasket Exhaust Valves 1.60” x 5.03” x 8mm AF59-3031
( 1.40 x 1.40 port size gasket ) Fel-Pro 1487 Valve Springs 1.575” Dual Springs
Head Bolts ARP 154-3605(7/16”) Valve Retainers 10-Degree 8mm
ARP 154-3603(1/2”) Valve Locks 10-Degree 8mm
Head Studs ARP 154-4003 (1/2”) Valve Seals 8mm x .502” Viton
Spark Plugs (14mm x 3/4" reach Rocker Arm Studs 7/16”-14 x 7/16”-24 AF59-3026
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat AF59-3027

216 aeroflowperformance.com
 CYLINDER HEADS

AF95-0361

AF95-2361
ALUMINIUM CYLINDER HEADS TO SUIT
FORD SMALL BLOCK WINDSOR CNC 200cc
The Aeroflow Performance small block Ford Windsor cylinder heads are
designed for street / race performance engines to give the ultimate in flow at
a competitive price. Made from A356-T6 aluminium castings they feature full
CNC intake ports and chambered square exhaust ports. These 200cc heads
accept larger then stock 1.575” ( 40mm ) diameter dual valve spring to handle
up to 0.710” ( 18mm ) maximum lift. Suits hydrauic roller camshafts. Specificaons
Material A356 Aluminum
Part No Description Combus‚on Chamber CC 60cc
AF95-0361 BARE (sold in pairs) Intake Port Volume CC 197cc
AF95-2361 COMPLETE (sold in pairs) Intake Port Dimension 2.13"H x 1.28"W
Exhaust Port Volume CC 68cc
Exhaust Port Dimension 1.40"H x 1.40"W

ENGINE COMPONENTS & ACCESSORIES

Spark Plug Loca‚on OEM
Intake Valve Diameter 2.08"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 8mm (.313")
Valve Spring Pocket I.D. 1.64"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.490" (.560" at base)
Rocker Stud Thread Size 7/16"x14
Valve Angle 20 Degree
Deck Thickness .750”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.048 65.500 Exhaust 0.100 0.063 61.300
Intake 0.200 0.096 123.700 Exhaust 0.200 0.125 119.100
Intake 0.300 0.144 183.400 Exhaust 0.300 0.188 167.800
Intake 0.400 0.192 239.200 Exhaust 0.400 0.250 203.600
Intake 0.500 0.240 267.600 Exhaust 0.500 0.313 225.600
Intake 0.600 0.288 287.100 Exhaust 0.600 0.375 235.700
Intake 0.700 0.337 298.300 Exhaust 0.700 0.439 240.100

Suggested Components Hydraulic Roller Cam (up to .710” li)

Head Gasket Fel-Pro 1011-1 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Installed Components Sizes
( 1.28 x 2.13 port size gasket ) Fel-Pro 1262 Intake Valves 2.08” x 5.00” x 8mm
Exhaust Gasket Exhaust Valves 1.60” x 5.03” x 8mm
( 1.40 x 1.40 D port size gasket ) Fel-Pro 1487 Valve Springs 1.575“ Dual Spring
Head Bolts ARP 154-3605(7/16”) Valve Retainers 10 degree 8mm
ARP 154-3603(1/2”) Valve Locks 10 degree 8mm
Head Studs ARP 154-4003 (1/2”) Valve Seals 8mm x .502” Viton
Spark Plugs (14mm x 3/4" reach Rocker Arm Studs 7/16”-14 base thread
with flat gasket seat ) Champion RC9YC
Push Rod Guide Plates 5/16” Flat
Spark Plugs Champion RC12YC
aeroflowperformance.com 217
 AEROFLOW
ENGINE COMPONENTS & ACCESSORIES

Aeroflow International Manufacturing & Distribution

Aeroflow has manufacturing facilities around the world with worldwide distribution. From our headquarters comprising of three facilities with over 90,000 square feet
of warehousing and dispatch including a dedicated R&D department, Warranty department and the Race Shop which houses and maintains over 12 Outlaw Nitro
funny Cars. Aeroflow has the capability to ship straight to your door whether it be one fitting or a full container of Aeroflow performance parts.

218 aeroflowperformance.com
 CYLINDER HEADS

Specificaons
Material A356 Aluminum
Combus‚on Chamber CC 72cc
Intake Port Volume CC 170cc
ALUMINIUM CYLINDER HEADS TO SUIT
Intake Port Dimension 2.065"H x 1.36"W
FORD FE 390-428 170cc
The Aeroflow Ford FE Aluminium Cylinder Heads are taking affordable
Exhaust Port Volume CC 125cc
performance street and strip cylinder heads to the next level. These heads Exhaust Port Dimension 1.85"H x 1.27"W
utilise ultra-smooth A356-T6 aluminium castings, new as-cast runner and
chamber designs produce CNC flow numbers. These Ford FE heads have Spark Plug Loca‚on Angled
170cc intake runners, combined with diamond-honed bronze guides and hand Intake Valve Diameter 2.09"
bowl blending to outperform some of the best brands in the business.
Exhaust Valve Diameter 1.66"
Part No Description

ENGINE COMPONENTS & ACCESSORIES

Valve Stem Diameter 3/8” (.375")
AF95-0390 BARE (sold in pairs) Valve Spring Pocket I.D. 1.725"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.562"
Rocker Stud Thread Size Sha˜ type
Valve Angle 13 Degree
Deck Thickness .625”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 82.100 Exhaust 0.100 0.063 53.500
Intake 0.200 0.099 149.900 Exhaust 0.200 0.125 97.100
Intake 0.300 0.149 183.300 Exhaust 0.300 0.188 136.100
Intake 0.400 0.198 217.000 Exhaust 0.400 0.250 173.000
Intake 0.500 0.248 241.400 Exhaust 0.500 0.313 193.000
Intake 0.600 0.297 261.600 Exhaust 0.600 0.375 202.800
Intake 0.650 0.322 272.600 Exhaust 0.650 0.406 208.200

Hydraulic / Solid Flat Tappet (up to .580” li)

Hydraulic Roller Cam (up to .580” li)
(Check Cam Manufacturer Recommenda‚on)

Installed Components Sizes

Intake Valves 2.09” x 5.45” x 3/8”
Exhaust Valves 1.66” x 5.45” x 3/8”
Valve Springs Per cam spec
Valve Retainers Per spring spec
Valve Locks Per spring spec
Valve Seals 3/8“ x .562”
Spark Plugs Champion RC9YC

aeroflowperformance.com 219
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

CHRYSLER SMALL BLOCK 179cc Specificaons
The Aeroflow Performance small block Chrysler cylinder heads are designed
for street performance engines to give the ultimate in flow at a budget price. Material A356 Aluminum
Made from A356 aluminium castings the 179cc cylinder heads are ideal for
operating in the idle to 6500 rpm range. The complete heads include larger Combus‚on Chamber CC 63cc
then stock 1.55” ( 39.4mm ) diameter dual valve spring to handle up to 0.580” ( Intake Port Volume CC 179cc
14.75mm ) maximum lift. Suits flat tappet and hydraulic camshafts.
Intake Port Dimension 2.28" x 1.16"
Exhaust Port Volume CC 79cc
ENGINE COMPONENTS & ACCESSORIES

Part No Description Exhaust Port Dimension 1.75"H x 1.25"W

AF95-0318 Bare 179cc small block chrysler alloy heads (pair) Spark Plug Loca‚on Angled
AF95-2318 Complete 179cc small block chrysler alloy heads (pair)
Intake Valve Diameter 2.02"
Exhaust Valve Diameter 1.60"
Valve Stem Diameter 11/32” (.343")
Valve Spring Pocket I.D. 1.50"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.530" (.560" at base)
Rocker Sha˜ Design OE Stock
Valve Angle 18 Degree
Deck Thickness .625”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.050 68.200 Exhaust 0.100 0.063 57.700
Intake 0.200 0.099 123.100 Exhaust 0.200 0.125 105.800
Intake 0.300 0.149 174.200 Exhaust 0.300 0.188 143.600
Intake 0.400 0.198 219.300 Exhaust 0.400 0.250 168.900
Intake 0.500 0.248 247.700 Exhaust 0.500 0.313 182.600
Intake 0.600 0.297 263.100 Exhaust 0.600 0.375 191.000
Intake 0.700 0.347 263.700 Exhaust 0.700 0.438 196.100

Suggested Components Hydraulic Flat Tappet Cam (up to .580” li)

Head Gasket Fel-Pro 1008 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket Fel-Pro 1213 Installed Components Sizes Part No
Exhaust Gasket Intake Valves 2.02” x 5.01” x 11/32” AF59-3181
Head Bolts ARP 144-3601 Exhaust Valves 1.60” x 5.01” x 11/32” AF59-3182
Head Studs ARP 144-4005 Valve Springs 1.47” Dual Springs AF59-3183
Spark Plugs Valve Retainers 10-Degree AF59-3184
( 14mm x 3/4" reach Valve Locks 10-Degree 11/32” AF59-3185
with flat gasket seat ) Champion RC9YC
Valve Seals 11/31” x .530”

220
 CYLINDER HEADS

ALUMINIUM CYLINDER HEADS TO SUIT

CHRYSLER BIG BLOCK 220cc Specificaons
The Aeroflow Performance big block Chrysler cylinder heads are designed
for street performance engines to give the ultimate in flow at a budget price. Material A356 Aluminum
Made from A356 aluminium castings the 220cc cylinder heads are ideal for Combus‚on Chamber CC 82cc
operating in the idle to 6500 rpm range. The complete heads include larger
then stock 1.55” ( 39.4mm ) diameter dual valve spring to handle up to 0.550” Intake Port Volume CC 220cc
(13.97mm) maximum lift. Intake Port Dimension 2.30" x 1.18"
Exhaust Port Volume CC 74cc
Part No Description
Exhaust Port Dimension 1.715"H x 1.25"W

ENGINE COMPONENTS & ACCESSORIES

AF95-2440 Complete 220cc big block chrysler alloy heads (pair)
Spark Plug Loca‚on OEM
Intake Valve Diameter 2.14"
Exhaust Valve Diameter 1.81"
Valve Stem Diameter 11/32” (.343")
Valve Spring Pocket I.D. 1.705"
Valve Guide Material Manganese Bronze
Valve Guide O.D. 0.530"
Rocker Sha˜ Design OEM
Valve Angle 15 degree
Deck Thickness .625”

Cylinder One Flow Tesng on Flow Bench

NOTE: ALL FLOWBENCHES ARE NOT CREATED EQUAL!
Data from one bench to the next can be vastly different.
The data on this table is for reference only.
Port Li L/D Cylinder One Port Li L / D Cylinder One
Average CFM Average CFM
Intake 0.100 0.047 70.500 Exhaust 0.100 0.055 56.500
Intake 0.200 0.093 146.400 Exhaust 0.200 0.110 114.600
Intake 0.300 0.140 200.200 Exhaust 0.300 0.166 156.500
Intake 0.400 0.187 237.700 Exhaust 0.400 0.221 186.300
Intake 0.500 0.234 255.400 Exhaust 0.500 0.276 209.700
Intake 0.600 0.280 272.800 Exhaust 0.600 0.331 224.300
Intake 0.700 0.327 280.200 Exhaust 0.700 0.387 233.800

Suggested Components Hydraulic Flat Tappet Cam (up to .550” li)

Head Gasket Fel-Pro 1009 (Check Cam Manufacturer Recommenda‚on)
Intake Gasket 383-400ci Fel-Pro 1214 Installed Components Sizes
Intake Gasket 413-440ci Fel-Pro 1215 Intake Valves 2.14” x 4.873” x 11/32” AF59-4401
Exhaust Gasket 383-400ci Fel-Pro 1414 Exhaust Valves 1.81” x 4.908” x 11/32” AF59-4402
Head Bolts ARP 145-3606 Valve Springs 1.550” Dual spring AF59-4403
Head Studs ARP 145-4006 Valve Retainers 10-Degree AF59-4404
Spark Plugs ( 14mm x 3/4" Valve Locks 10-Degree 11/32” AF59-4405
reach with flat gasket seat ) Champion RC9YC
Valve Seals 11/32” x .530”

aeroflowperformance.com 221
 VALVE COVERS

VALVE TRAIN COMPONENTS TO SUIT

AEROFLOW HEADS STAMPED STEEL ROCKER COVERS
Designed for function and fashioned for great looks, Aeroflow’s Stamped
Valve Covers have stock-style breather baffles that prevent oil pas-
sage to the PVC valve. Available in two great finishes; chrome plated
and black electrolysis. Available with and without logo. Also comes with
one 10.05mm (3/4”) ID and one 25.4mm (1”) ID rubber grommets to suit
31.5mm (1-1/4”) breather hole.
NOTE: Aeroflow breathers see page 108 & 109

With Stamped Aeroflow Logo

COMPONENTS TO SUIT 180cc & 200cc

CHEVY SMALL BLOCK CYLINDER HEADS
Part No Description
AF59-3501 1 x intake valve 2.020” 180cc and 200cc
AF59-3502 1x exhaust valve 1.60” 180cc and 200cc
AF59-3503 1 x dual valve spring
AF59-3504 1 x retainer suit 180cc & 200cc
AF59-3505 1 x set of valve locks / keepers
AF59-3506 1 x set rocker stud set suit 180,200cc To Suit Small Block Chevy Early
AF59-3507 1 x set Guide plates suit 180,200cc AF1821-5000 Chrome
AF1822-5000 Black
COMPONENTS TO SUIT
ENGINE COMPONENTS & ACCESSORIES

CHEVY BIG BLOCK CYLINDER HEADS

Part No Description
AF59-4271 1 x intake valve 2.250”
AF59-4272 1 x exhaust valve 1.880”
AF59-4273 1 x dual valve spring
AF59-4274 1 x retainer
AF59-4275 1 x set of valve locks / keepers
AF59-4276 1 x set rocker stud set suit
AF59-4277 1 x set Guide plates suit

COMPONENTS TO SUIT 175cc

FORD SMALL BLOCK CYLINDER HEADS
Description
AF59-3021 1 x intake valve 2.020”
AF59-3022 1x exhaust valve 1.60” To Suit Ford 302 / 351 Cleveland
AF59-3023 1 x dual valve spring AF1821-5001 Chrome
AF59-3024 1 x retainer AF1822-5001 Black
AF59-3025 1 x set of valve locks / keepers
AF59-3026 1 x set rocker stud set
AF59-3027 1 x set Guide plates

COMPONENTS TO SUIT
318 - 360 CHRYSLER CYLINDER HEADS
Part No Description
AF59-3181 1 x intake valve 2.020”
AF59-3182 1 x exhaust valve 1.60”
AF59-3183 1 x dual valve spring
AF59-3184 1 x retainer
AF59-3185 1 x set of valve locks / keepers

COMPONENTS TO SUIT
440 CHRYSLER CYLINDER HEADS
Part No Description
AF59-4401 1 x intake valve 2.14” To Suit Ford 289 / 351 Windsor
AF59-4402 1x exhaust valve 1.81”
AF59-4403 1 x dual valve spring AF1821-5002 Chrome
AF59-4404 1 x retainer AF1822-5002 Black
AF59-4405 1 x set of valve locks / keepers
AF59-4406 1 x set rocker stud set

222 aeroflowperformance.com
 VALVE COVERS

For breathers
se
page 108 e To Suit Ford 289 / 351 Windsor
AF1821-5052 Chrome
AF1822-5052 Black

To Suit Holden (GM Australia) V8 early

AF1821-5004 Chrome To Suit Holden (GM Australia) V8 early
AF1822-5004 Black AF1821-5054 Chrome
AF1822-5054 Black

ENGINE COMPONENTS & ACCESSORIES

To Suit Chrysler S/B
AF1821-5056 Chrome
To Suit Chrysler S/B AF1822-5056 Black
AF1821-5006 Chrome
AF1822-5006 Black

AF1859-1000 AF1859-1001
Plain ( No Logo )
Valve Cover Grommet 1pc Suit Steel Covers
AF1859-1000 25.4mm (1”) ID to suit 31.75mm (1-1/4”) hole
AF1859-1001 19.05mm (3/4”) ID to suit 31.75mm (1-1/4”) hole

FABRICATED ROCKER COVERS

Aeroflow’s Fabricated Rocker Covers are made from 5051 aluminium.
They have a one-piece billet rail CNC machined from 6061-T6 aluminium
to guarantee a precision flat surface for superior sealing. They come in
either polished or black anodised finished. The covers come standard with
a female -8 ORB (some are available with -12) for breather applications
and a threaded o-ringed billet oil filler cap. All covers are tall enough to
To Suit Small Block Chevy Early clear 99% of rocker combinations.
AF1821-5050 Chrome
AF1822-5050 Black

To Suit Small Block Chevy

AF77-5000 Polished SBC Chevy early -8 breather ports
AF77-5000BLK Black SBC Chevy early -8 breather ports
AF77-5000-12 Polished SBC Chevy early -12 breather ports
AF77-5000BLK-12 Black SBC Chevy early -12 breather ports

To Suit Ford 302 / 351 Cleveland

To Suit Chevy GM LS Series (no coil mounts)
AF1821-5051 Chrome
AF1822-5051 Black AF77-5003 Polished
AF77-5003BLK Black

aeroflowperformance.com 223
 VALVE COVERS

See page 239 - 240 for LS

coils and accessories

To Suit Ford Cleveland

AF77-5001 Polished Ford 302 / 351 Cleveland -8 breather ports
AF77-5001BLK Black Ford 302 / 351 Cleveland -8 breather ports
AF77-5001-12 Polished Ford 302 / 351 Cleveland -12 breather ports
AF77-5001BLK-12 Black Ford 302 / 351 Cleveland -12 breather ports

BILLET RETRO COVERS TO SUIT

To Suit Ford 289 / 351 Windsor
GM LS SERIES ENGINES
These Aeroflow billet valve covers are machined from a solid block of
AF77-5002 Polished
6061-T6 aluminium and then hand polished for an amazing finish. They
AF77-5002BLK Black
feature super flat gasket rails that ensure no leaks and offer a superior
seal for supreme vacuum retention. These covers fit LS1, LS2 or LS3
OEM style coils.Included in the covers is a female -6 ORB for custom
plumbing options. Make a statement at your next car show with these awe-
some covers!

Part No Colour To Suit

ENGINE COMPONENTS & ACCESSORIES

AF64-4110 Polished LS Series billet rocker covers

AF64-4110S Silver LS Series billet rocker covers
AF64-4110BLK Black LS Series billet rocker covers

To Suit Holden V8 early

AF77-5004 Polished
AF77-5004BLK Black

To Suit Holden V8 VN-VT

AF77-5005 Polished
AF77-5005BLK Black
GILMER BELTS
Aeroflow Gilmer belts are designed with extra nylon webbing making them
Replacement oil filler cap thicker for superior performance and durability.
AF59-5000 Polished
AF59-5000BLK Black Part No Description
AF65-1007 300L100 762mm (30”) x 25.4mm (1”)
AF65-1008 300L150 762mm (30”) x 38.1mm (1-1/2”)
AF65-1009 322L100 813mm (32”) x 25.4mm (1”)
AF65-1010 322L150 813mm (32”) x 38.1mm (1-1/2”)
AF65-1000 345L150 876mm (34-1/2”) x 38.1mm (1-1/2”)
AF65-1001 367L150 932mm (36-45/64”) x 38.1mm (1-1/2”)
AF65-1002 390L150 991mm (39”) x 38.1mm (1-1/2”)
AF65-1003 405L150 1029mm (40-1/2”) x 38.1mm (1-1/2”)
AF65-1004 420L150 1057mm (42”) x 38.1mm (1-1/2”)
AF65-1006 435L150 1105mm (43-1/2”) x 38.1mm (1-1/2”)
AF65-1005 450L150 1143mm (45”) x 38.1mm (1-1/2”)

ROCKER COVER
BOLTS TO SUIT FORD
Part No Colour Description GILMER PULLEY SPACER
AF37-0005 Chrome Suits 302-351 Cleveland
Ford Motorsport Covers (Cap Screw)
Part No Description
AF64-3005 universal shim for water pump pulley, 6mm (1/4”)
thick. 15.87mm (5/8”) centre hole. Suits Chev, Ford &
Holden. Required for Red style pump on Holden V8.

224 aeroflowperformance.com
 GILMER KITS

AF64-3006

AF64-3001BLK

ENGINE COMPONENTS & ACCESSORIES

AF64-3002

AF64-3006BLK

AF64-3003BLK

GILMER DRIVE KITS

GILMER DRIVE PULLEYS (SINGLES) Aeroflow’s Industry first 100% complete billet 6061-T6 aluminium Gilmer
Aeroflow offers replacement Gilmer drive pulleys individually. drive. Anodised for case hardness for maximum life of your Gilmer teeth
which prevents slippage and torn belts. Complete with chrome allen key bolts.
Part No Colour To Suit
AF59-3000A Silver Alternator pulley suits all kits except AF64-3006 Part No Colour To Suit
AF59-3000ABLK Black Alternator pulley suits all kits except AF64-3006
AF59-3006ABLK Black Holden EFI alternator pulley Chevy
AF59-3000C Silver SB/BB Chevy short water pump, crank pulley AF64-3000 Silver SB/BB Chevy short water pump
AF59-3000CBLK Black SB/BB Chevy short water pump, crank pulley AF64-3000BLK Black SB/BB Chevy short water pump
AF59-3000W Silver SB/BB Chevy short & long water pump pulley AF64-3001 Silver SB/BB Chevy long water pump
AF59-3000WBLK Black SB/BB Chevy short & long water pump pulley with V-groove for P/S or A/C
AF59-3001C Silver SB/BB Chevy long water pump, crank pulley AF64-3001BLK Black SB/BB Chevy long water pump
with V-groove for P/S or A/C with V-groove for P/S or A/C
AF59-3001CBLK Black SB/BB Chevy long water pump, crank pulley Ford
with V-groove for P/S or A/C AF64-3002 Silver 289-351W , 302-351C 3 & 4 bolt
AF59-3002C Silver 289-351W , 302-351C 3 & 4 bolt pattern with V-groove
pattern crank pulley with V-groove AF64-3002BLK Black 289-351W , 302-351C 3 & 4 bolt
AF59-3002CBLK Black 289-351W , 302-351C 3 & 4 bolt pattern with V-groove
pattern crank pulley with V-groove Holden (GM Australia)
AF59-3002W Silver 289-351W , 302-351C water pump pulley AF64-3003 Silver 253-308 Holden V8 with late style pump
AF59-3002WBLK Black 289-351W , 302-351C water pump pulley AF64-3003BLK Black 253-308 Holden V8 with late style pump
Note: Use with AF64-3005 for early pump
Holden (GM Australia) AF64-3006 Silver 304 EFI Holden V8 with P/Steer pump spacers
AF59-3003C Silver 253-308 Holden V8 crank pulley AF64-3006BLK Black 304 EFI Holden V8 with P/Steer pump spacers
AF59-3003CBLK Black 253-308 Holden V8 crank pulley NOTE: Belts sold separately
AF59-3003W Silver 253-308 Holden V8 water pump pulley
AF59-3003WBLK Back 253-308 Holden V8 water pump pulley

aeroflowperformance.com 225
 PULLEYS

GILMER V-GROOVE ADAPTER TO

SUIT HOLDEN UNIVERSAL BILLET FAN SPACER KIT
Aeroflow’s gilmer power steer V-groove adapter allows you to adapt and run a Fits Holden, Ford and Chev
v-belt accessory such as power steering or air-conditioning with your Aeroflow 5/16”-24 bolts and reducer bushing for 15.87mm (5/8”) or 19.05mm (3/4”)
Holden Gilmer Drive. water pump shaft.
Note:-Accessory drive mounting brackets may need to be modified to obtain
correct v-belt alignment. Part No Description

Part No AF64-3040 25.4mm (1”) Billet spacer kit

Description
AF64-3041 50.8mm (2”) Billet spacer kit
AF64-3010 Silver Holden Gilmer power steer V-groove adapter
AF64-3010BLK Black Holden Gilmer power steer V-groove adapter
ENGINE COMPONENTS & ACCESSORIES

POWER STEERING FLOW CONTROL

VALVE TO SUIT SAGINAW
Designed to fit Saginaw power steering pumps. Replaces factory
valve in light steering applications to restrict flow to 3.78lpm
(2gpm). Stops fluid foaming in power steering tank. -6AN outlet.

Part No Description
AF64-2915 2gpm power steering flow control valve

BILLET V PULLEYS
Part No Colour To Suit
To Suit S/B FORD CLEVELAND
AF64-2023 Chrome Billet Water Pump Pulley
302-351C Ford
AF64-2023BLK Black Billet Water Pump Pulley
302-351C Ford
AF64-2024 Chrome Billet Crank Pulley, Single Groove
302-351C Ford 4 Bolt Damper
AF64-2024BLK Black Billet Crank Pulley, Single Groove
302-351C Ford 4 Bolt Damper
To Suit HOLDEN (GM Australia)
AF64-4022 Chrome Billet Water Pump Pulley, Single V
V8 with small bearing water pump
AF64-4022BLK Black Billet Water Pump Pulley, Single V
GM LS POWER STEERING DELETE
V8 with small bearing water pump Aeroflow power steer delete bracket and idler pulley is manufactured from
AF64-4024 Chrome Billet Water Pump, Single Groove 6061-T6 billet aluminium. This is the perfect choice for engine conversions
V8 with Large (Jumbo) bearing when deleting the power steering or when doing electric power steering
water pump conversions. Aeroflow engineers have designed the kits bracket to
AF64-4024BLK Black Billet Water Pump, Single Groove suit either early VT-VZ or the late VE-VF belt lines. Kit is complete with all
V8 with Large (Jumbo) bearing mounting hardware.
water pump
AF64-4023 Chrome Billet Crank Pulley, Single Groove Part No Colour Description
Suits V8 Holden
AF64-4367 Polished LS power steering delete.
AF64-4023BLK Black Billet Crank Pulley, Single Groove
Suits V8 Holden AF64-4367BLK Black LS power steering delete.

226 aeroflowperformance.com
 POWER STEERING

AF64-4009
AF64-4009BLK

AF64-4001

BILLET POWER STEERING BRACKETS AF64-4011BLK

Part No Colour Description

To Suit S/B CHEVY
AF64-4001 Polished Suit left hand side mid mount
P/S pump with long water pump
AF64-4001BLK Black Suit left hand side mid mount
P/S pump with long water pump
AF64-4011 Polished Suit left hand side High mount
P/S pump with long water pump
AF64-4011BLK Black Suit left hand side High mount
P/S pump with long water pump

To Suit S/B FORD CLEVELAND

AF64-4009 Polished Suit left hand side mid mount
with GM Saginaw P/S pump
AF64-4009BLK Black Suit left hand side mid mount
with GM Saginaw P/S pump

ENGINE COMPONENTS & ACCESSORIES

POWER STEERING ADAPTOR FITTINGS AF351-06S AF355-06SS

Part No Description Material

AF353-06SS 1/2”-20 inverted flare to -6 S/S PS Adapter Stainless Steel
AF354-06SS 5/8”-18 Inverted flare to -6 S/S GM/Sag PS Box Stainless Steel
AF355-06SS 11/16”-18 Inverted flare to -6 S/S GM/Sag PS Box Stainless Steel
AF350-06S M14 x 1.50 O-ring to -6 Alloy O-ring Style Aluminium AF361-06BLK
AF351-06S M16 x 1.50 O-ring to -6 Alloy GM/Sag PS Box O-ring Style Aluminium
AF351-06ST M16 x 1.50 O-ring to -6 Alloy GM/Sag PS Box O-ring Style Steel
AF352-06SS M18 x 1.50 O-ring to -6 S/S GM/Sag PS Box O-ring Style Stainless Steel
AF361-06BLK M14 x 1.50 Inverted seat to -6AN Suits Nissan / Toyota BLACK Aluminium
AF361-06 M14 x 1.50 Inverted seat to -6AN Suits Nissan / Toyota BLUE Aluminium
AF361-06S M14 x 1.50 Inverted seat to -6AN Suits Nissan / Toyota SILVER Aluminium

Note: Pulley can also be

used on OEM bracket

AF64-4027
GM LS BILLET DRIVE BELT TENSIONER AF64-4027BLK

GM LS Billet Belt Drive tensioner complete with billet pulley and nose cover GM LS SERIES CHEVY
allows for a manual adjustment for accurate belt tension complete with all
mounting hardware. ALTERNATOR BRACKETS
suits VT-VZ & 04-06 GTO belt line
Part No Colour Description
AF64-4038 Polished VE-VF Manual LS belt tensioner Part No Colour Description- To Suit
AF64-4038BLK Black VE-VF Manual LS belt tensioner
AF64-4031 Polished VT-VZ Manual LS belt tensioner AF64-4027 Polished Left hand side standard position
AF64-4031BLK Black VT-VZ Manual LS belt tensioner AF64-4027BLK Black Left hand side standard position
AF59-4031 Polished Replacement pulley, nose cover & bolts
AF59-4031BLK Black Replacement pulley, nose cover & bolts

aeroflowperformance.com 227
 BRACKETS & ACCESSORIES

ALTERNATOR
BRACKETS to suit B/B CHEVY
Part No Colour Description- To Suit
AF64-4003 Polished Low mount left hand side to suit
Short water pump
AF64-4003BLK Black Low mount left hand side to suit
Short water pump

STEEL ALTERNATOR BRACKETS

Part No Colour Description AF64-4006

To Suit S/B CHEVY

AF64-4010 Chrome Low mount to suit long water pump
AF64-4010BLK Black Low mount to suit long water pump
ENGINE COMPONENTS & ACCESSORIES

AF64-4015 Chrome Low mount to suit short water pump

AF64-4015BLK Black Low mount to suit short water pump
AF64-4007BLK
To Suit B/B CHEVY
AF64-4016 Chrome Low mount to suit long water pump
AF64-4016BLK Black Low mount to suit long water pump
AF64-4017 Chrome Low mount to suit short water pump
AF64-4017BLK Black Low mount to suit short water pump

AF64-4002

AF64-4008

AF64-4005BLK
ALTERNATOR BRACKETS to suit
S/B FORD WINDSOR
(All Mount on Right hand side)

AF64-4004BLK
Part No Colour Description- To Suit

AF64-4006 Polished 289-302 Std mount, right hand side

lower radiator water pump hose
AF64-4006BLK Black 289-302 Std mount right hand side
lower radiator water pump hose
ALTERNATOR BRACKETS to suit AF64-4007 Polished 289-302 Std mount, left hand side
S/B CHEVY lower radiator water pump hose
AF64-4007BLK Black 289-302 Std mount left hand side
Part No Colour Description- To Suit lower radiator water pump hose
AF64-4005 Polished 351W Std mount, left hand side
AF64-4002 Polished Mid mount right hand side to suit lower radiator water pump hose
long water pump AF64-4005BLK Black 351W Std mount, left hand side
AF64-4002BLK Black Mid mount right hand side to suit lower radiator water pump hose
long water pump AF64-4008 Polished 351W Std mount, right hand side
AF64-4004 Polished Low mount left hand side to suit lower radiator water pump hose
Short water pump AF64-4008BLK Black 351W Std mount, right hand side
AF64-4004BLK Black Low mount left hand side to suit lower radiator water pump hose
Short water pump

228 aeroflowperformance.com
 BRACKETS & ACCESSORIES

AF64-4000

AF64-4000BLK

ALTERNATOR BRACKETS to suit

S/B FORD CLEVELAND
Part No Colour Description- To Suit

ENGINE COMPONENTS & ACCESSORIES

AF64-4000 Polished 351C Mid mount right hand side
AF64-4000BLK Black 351C Mid mount right hand side
AF64-4033

AF64-4035
AF64-4025BLK

ALTERNATOR BRACKETS to suit

HOLDEN (GM Australia) V8
Part No Colour Description- To Suit
AF64-4033 Polished Mid mount right hand side, pre EFI
AF64-4033BLK Black Mid mount right hand side, pre EFI AF64-4035BLK
AF64-4025 Polished Mid mount left hand side. All
AF64-4025BLK Black Mid mount left hand side. All

GM HOLDEN USING CHEVY

ALTERNATOR MOUNTING KIT
When you mount a Chevy alternator to a
Holden engine its close but not quite right.
Aeroflow have developed a spacer kit to ALTERNATOR BRACKETS to suit
get the fitment and belt alignment perfect.
This adapter kit allows the use of Aeroflow
HOLDEN (GM Australia)
Chev 100, 120 and 140 AMP alternators LH - LX - UC TORANA
to be mounted to any Holden V8 and even
the Holden 6 Cylinder, fitted with a Bosch Part No Colour Description- To Suit
alternator.
AF64-4035 Polished Right hand side Low Mount
Part No Description AF64-4035BLK Black Right hand side Low Mount

AF4000-1000 Chevy to Holden Alternator mounting kit.

aeroflowperformance.com 229
 BRACKETS & ACCESSORIES

AF64-4028
AF64-4300

AF64-4028BLK

ALTERNATOR BRACKETS to suit AF64-4300BLK

To Suit NISSAN RB
BILLET ALTERNATOR FAN & PULLEY
Part No Colour Description- To Suit
Part No Colour Description
AF64-4028 Polished Alternator bracket
AF64-4028BLK Black Alternator bracket AF64-4300 Polished Billet Alternator Fan & Pulley
AF64-4300BLK Black Billet Alternator Fan & Pulley

HEIM-JOINT ADJUSTABLE TENSIONER

Aeroflow now offer universal stainless steel adjusting rods. The adjusting
ENGINE COMPONENTS & ACCESSORIES

rods feature 3/8” eyelet rod ends for use with 3/8” diameter bolts or smaller
when used with a shoulder bolt and offer 1” of adjustment. These handy
adjusting rods are the same as used in our billet alternator, power steer and
a/c bracket kits and can be used in many custom applications.
Measurement is centre to centre of eyelet hole.

Part No Description
AF60-4011 90mm (3-1/2”) and allows 25.4mm (1”) further adjustment
AF60-4002 98.6mm (3-7/8”) and allows 25.4mm (1”) further adjustment
AF60-4000 112.4mm (4-3/8”) & allows 25.4mm (1”) further adjustment
AF60-4007 146mm (5-3/4”) and allows 25.4mm (1”) further adjustment
AF60-4008 168mm (6-5/8”) and allows 25.4mm (1”) further adjustment

BILLET LOW MOUNT A/C BRACKET

Aeroflow has developed an air conditioning compressor bracket that
positions the compressor low and snug on left hand side beside the block.
Made to suit small block Chevy. These brackets are a custom fit and may
suit universal applications in hot rods and muscle cars fitted with small block
Chevs dependant on space.
(shown fitted in 1969 Camaro). Used with High mount P/S Bracket.

Part No Colour Description

S/B CHEVY
AF64-4012 Polished Suit Small Block Chevy Assembled unit displayed
AF64-4012BLK Black Suit Small Block Chevy

AF64-4002BLK, AF64-4012BLK & AF64-4011BLK fitted to S/B Chev in 1969 Camaro (Tall engine mounts)

230 aeroflowperformance.com
 BONNET & ACCESSORIES

Part No Colour Description

Metric
AF64-4365S Silver M6 x 1.00mm, 20mm (25/32”)UHL, 10 pack
AF64-4365BLK Black M6 x 1.00mm, 20mm (25/32”)UHL, 10 pack
AF64-4365G Gold M6 x 1.00mm, 20mm (25/32”)UHL, 10 pack
AF64-4365R Red M6 x 1.00mm, 20mm (25/32”)UHL, 10 pack
AF64-4365PUR Purple M6 x 1.00mm, 20mm (25/32”)UHL, 10 pack
AF64-4365 Blue M6 x 1.00mm, 20mm (25/32”)UHL, 10 pack

Imperial
AF64-4371S Silver 5/16”-18 UNC 25mm (1”) UHL 10 pack
AF64-4371BLK Black 5/16”-18 UNC 25mm (1”) UHL 10 pack
BILLET DRESS UP BOLTS AF64-4371R Red 5/16”-18 UNC 25mm (1”) UHL 10 pack
Add that last finishing touches to your engine bay with these all new Aero- AF64-4371 Blue 5/16”-18 UNC 25mm (1”) UHL 10 pack
flow Performance billet dress up bolts. Offered in anodized black, blue,
gold, purple, red and silver. These fender washers are constructed from
aircraft grade aluminium and are matched up with long lasting stainless
steel bolts.

ENGINE COMPONENTS & ACCESSORIES

AF64-4105 AF64-4105BLK
AF64-4122 AF64-4122BLK

AF64-4129
AF64-4129BLK
AF64-4128
BILLET BONNET / HOOD HINGES AF64-4128BLK

Aeroflow Billet bonnet hinges are machined from 6061-T6 aluminium.

No modifications are necessary, they simply bolt in place of your OE
steel hinges. Aeroflow billet hinges include quality ball bearing joints and
mounting bolts. Available in polished alloy, machined silver or shiny black
anodised finish. Struts suit steel bonnets ONLY.

Part No Colour To Suit

Holden (GM Australia)
AF64-4122 Polished HQ to WB, LH to UC Holden Bonnet hinge kit
AF64-4102S Silver HQ to WB, LH to UC Holden Bonnet hinge kit
AF64-4122BLK Black HQ to WB, LH to UC Holden Bonnet hinge kit
AF64-4128 Polished LC-LJ Torana Bonnet hinge kit
AF64-4108S Silver LC-LJ Torana Bonnet hinge kit
AF64-4128BLK Black LC-LJ Torana Bonnet hinge kit BILLET BONNET ADJUSTER
AF64-4129 Polished HK, HT & HG Holden Bonnet hinge kit
AF64-4109S Silver HK, HT & HG Holden Bonnet hinge kit Aeroflow billet bonnet adjusters are perfect to dress up your engine bay!
AF64-4129BLK Black HK, HT & HG Holden Bonnet hinge kit Machined from 6061-T6 aluminium and featured a hardened rubber insert,
Ford (Australia) allows adjustment down to 21mm(13/16”) height. 5/16” UNC thread
AF64-4105 Polished *XR to XY Ford Falcon Bonnet hinge kit Available in polished or shiny black anodised finish.
AF64-4105S Silver *XR to XY Ford Falcon Bonnet hinge kit
AF64-4105BLK Black *XR to XY Ford Falcon Bonnet hinge kit Part No Colour Description
*NOTE: XR to XY Ford Falcon Bonnet hinge kits suit Girling Booster
AF64-4101 Polished 21mm (13/16”) height
AF59-4102 Black Replacement gas strut (250lbs 113kg) for all AF64-4101S Silver 21mm (13/16”) height
hinges to suit original steel bonnets. AF64-4101BLK Black 21mm (13/16”) height

aeroflowperformance.com 231
 IGNITION PRODUCTS

XPRO READY TO RUN DISTRIBUTOR

TO SUIT CHEVROLET S/B & B/B
Chevy V8 ready to run XPRO distributors come complete with ignition
module and built in adjustable rev limiter. These distributors are ready to use
and do not require any external ignition boxes.
Height from base of collar 203mm (8-1/8”)
Total width of cap 127mm (5-1/8”)
Shaft diameter 12.7mm (0.500”)

Part No Description Cap Colour

AF4210-8360BLK Black anodised body Black Cap
AF4010-8360BLK Machined aluminium body Black Cap
AF4010-8360R Machined aluminium body Red Cap

Service & Replacement Parts

AF4590-84333 Black distributor cap
XPRO DISTRIBUTORS AF4595-8433 Red distributor cap
AF4590-14548 Ignition Module & Magnetic Pickup
& IGNITION ACCESSORIES AF4590-8467 Rotor button
ELECTRICAL ACCESSORIES & GAUGES

AF4590-8531 Chevy V8 steel distributor gear

Aeroflow now offer a line of performance XPRO distributors for the most
AF4590-88621 Wiring Harness
popular V8 engines. The bodies are machined from 6061-T6 billet aluminium
AF4590-8463 Adjustable vacuum advance canister Silver
and utilise a chromium manganese titanium steel gear ( 20CRMOTI )which is
AF4590-84633 Adjustable vacuum advance canister Black
suited for use with all cam shafts. These distributors are ready to run and do
AF4590-8468 Vacuum advance lock-out bracket
NOT require an external ignition box. The internal ignition module features a
AF4590-8464 Timing advance spring & bush kit
built in adjustable rev limiter. Aeroflow XPRO distributors are easy to install
with only 3 wires to connect with weather tight connector and wiring harness
included. Simply connect power, coil negative and earth. they also come with
a grey output wire that is used to send a tach signal and set your built in rev
limiter or trigger your aftermarket EFI system.

XPRO READY TO RUN DISTRIBUTOR

HEI DISTRIBUTORS TO TO SUIT HOLDEN 253 - 304 - 308 - 355
SUIT CHEVROLET Holden V8 ready to run XPRO distributors come complete with ignition
module and built in adjustable rev limiter. These distributors are ready to use
S/B & B/B and do not require any external ignition boxes.
Height from base of collar 192mm (7-19/16”)
Chevy V8 HEI distributor complete with coil. Total width of cap 123mm (4-7/8”)
Height from base of collar 216mm (8-1/2”) Shaft diameter 11.6mm (0.456”)
Total width of cap 152mm (6”)
Shaft diameter 12.7 (0.500”)
Part No Description Cap Colour
Part No Description Cap Colour
AF4210-85891BLK Black anodised body Black Cap
AF4210-8362BLK Black anodised body Black Cap AF4010-85891BLK Machined aluminium body Black Cap
AF4010-8362BLK Machined aluminium body Black Cap AF4010-85891R Machined aluminium body Red Cap
AF4010-8362R Machined aluminium body Red Cap
Service & Replacement Parts
Service & Replacement Parts AF4590-84333 Black distributor cap
AF4590-8362 Black HEI distributor cap (coil sold seperately) AF4595-8433 Red distributor cap
AF4595-8362 Red HEI distributor cap (coil sold seperately) AF4590-14548 Ignition Module & Magnetic Pickup
AF4590-5596 Ignition Module AF4590-8467 Rotor button
AF4590-5525 Black HEI coil AF4590-23102 Holden V8 steel distributor gear
AF4590-84101 Rotor button AF4590-88621 Wiring Harness
AF4590-8531 Chevy V8 steel distributor gear AF4590-8463 Adjustable vacuum advance canister Silver
AF4590-31035 Adjustable vacuum advance canister Silver AF4590-84633 Adjustable vacuum advance canister Black
AF4590-31335 Adjustable vacuum advance canister Black AF4590-8468 Vacuum advance lock-out bracket
AF4590-83621 Magnetic pickup assembly AF4590-8464 Timing advance spring & bush kit
AF4590-8428 Timing advance spring & bush kit

232 aeroflowperformance.com
 IGNITION PRODUCTS

XPRO READY TO RUN DISTRIBUTOR TO XPRO READY TO RUN DISTRIBUTOR

SUIT FORD 289 - 302 WINDSOR BILLET TO SUIT CHRYSLER S/B 318-360
Ford Windsor V8 ready to run XPRO distributors come complete with ignition
module and built in adjustable rev limiter. These distributors are ready to use Chrysler small block ready to run XPRO distributors come complete with
and do not require any external ignition boxes. ignition module and built in adjustable rev limiter. These distributors are ready
Height from base of collar 209mm (8-1/4”) to use and do not require any external ignition boxes.
Total width of cap 120mm (4-3/4”) Height from base of collar 233mm (9-3/16”)
Shaft diameter 11.88mm (0.468”) Total width of cap 120mm (4-3/4”)

Part No Description Cap Colour

AF4210-8352BLK Black anodised body Black Cap
Part No Description Cap Colour
AF4010-8352BLK Machined aluminium body Black Cap AF4210-8388BLK Black anodised body Black Cap
AF4010-8352R Machined aluminium body Red Cap AF4010-8388BLK Machined aluminium body Black Cap
AF4010-8388R Machined aluminium body Red Cap
Service & Replacement Parts
AF4590-84313 Black distributor cap

ELECTRICAL ACCESSORIES & GAUGES

Service & Replacement Parts
AF4595-8431 Red distributor cap AF4590-84333 Black distributor cap
AF4590-14548 Ignition Module & Magnetic Pickup AF4595-8433 Red distributor cap
AF4590-8467 Rotor button AF4590-14548 Ignition Module & Magnetic Pickup
AF4590-85833 Suits 289-302 Windsor V8 steel distributor gear AF4590-8467 Rotor button
AF4590-88621 Wiring Harness AF4590-88621 Wiring Harness
AF4590-8463 Adjustable vacuum advance canister Silver AF4590-8463 Adjustable vacuum advance canister Silver
AF4590-84633 Adjustable vacuum advance canister Black AF4590-84633 Adjustable vacuum advance canister Black
AF4590-84681 Vacuum advance lock-out bracket AF4590-8468 Vacuum advance lock-out bracket
AF4590-8464 Timing advance spring & bush kit AF4590-8464 Timing advance spring & bush kit

XPRO VACUUM ADVANCE LOCK OUT

The Aeroflow Performance vacuum advance block off kit bolts in place of the
vacuum advance canister on a GM HEI distributor to neatly and effectively
lock timing solid.
XPRO READY TO RUN DISTRIBUTOR TO No more welding the mechanical advance weights or trying to find a way to
keep the vacuum advance from moving once the canister is removed.
SUIT FORD 429 - 460, 302 - 351 CLEVELAND
Ford Cleveland V8 ready to use XPRO distributors come complete with Part No Description
ignition module and built in adjustable rev limiter. These distributors are
ready to use and do not require any external ignition boxes. AF4590-84681 Vacuum advance block off kit suits Ford distributors
Height from base of collar 227mm (8-15/16”) AF4590-8468 Vacuum advance block off kit suits Chevy Chrysler &
Total width of cap 120mm (4-3/4”) Holden distributors
Shaft diameter 13.48mm (0.531”)

Part No Description Cap Colour

AF4210-8350BLK Black anodised body Black Cap DISTRIBUTOR
AF4010-8350BLK Machined aluminium body Black Cap
AF4010-8350R Machined aluminium body Red Cap ROLL PINS
Service & Replacement Parts All gears have the possibility of eventual damage to the teeth. When it
AF4590-84313 Black distributor cap comes time to replace the distributor gear due to damage or the need
AF4595-8431 Red distributor cap for a different material, check out Aeroflow Performance distributor gear
AF4590-14548 Ignition Module & Magnetic Pickup replacement roll pins to securely hold it in place for the long haul.
AF4590-8467 Rotor button
AF4590-85813 Suits Ford 429-460/Cleveland V8 steel distributor gear Part No Description
AF4590-88621 Wiring Harness
AF4590-8463 Adjustable vacuum advance canister Silver AF4590-11075 XPro Distributor Roll Pin
AF4590-84633 Adjustable vacuum advance canister Black Diameter 1.25mm (1/8”) Length 19mm (3/4”)
AF4590-84681 Vacuum advance lock-out bracket AF4590-10084 20A MAG Roll Pin
AF4590-8464 Timing advance spring & bush kit Diameter 4.76mm (3/16”) Length 22.2mm (7/8”)

aeroflowperformance.com 233
 IGNITION PRODUCTS

BILLET DISTRIBUTOR HOLD DOWN CLAMP

Aeroflow’s distributor hold down brackets prevent your V8 distributor from twisting at high RPM.

Blue Red Black Silver Chrome

Suits SBC / BB CHEVY
AF64-2032 AF64-2032R AF64-2032BLK AF64-2032S AF64-2032C
Suits SB FORD WINDSOR & CLEVELAND (Small)
AF64-2035 AF64-2035R AF64-2035BLK AF64-2035S AF64-2035C
Suits SB FORD WINDSOR & CLEVELAND (Large)
AF64-2093 AF64-2093R AF64-2093BLK AF64-2093S AF64-2093C
Suits HOLDEN (GM Australia) V8
AF64-2038 AF64-2038R AF64-2038BLK AF64-2038S AF64-2038C

AF4530-31239
ELECTRICAL ACCESSORIES & GAUGES

XPRO 8.5mm IGNITION LEAD SETS

Aeroflow’s 8.5mm (21/64”) Universal spark plug wire sets come with the
spark plug terminal and boots fitted with the other end open. Distributor cap
boots and terminals for both late model type (HEI male terminals style) and
early style (female terminals) are included so you can cut to the preferred
length. The kit is supplied with a mini crimper. It is an 8 cylinder kit supplied
with three 812.80 mm (32”), two 1219.20mm (48”), two 1270mm (50”) and
two 1422mm (56”).
• Spiral Wound 8.5mm (21/64”) lead wire
• Low Resitance (40-50 ohms per foot)
• High EMI Suppression AF4030-31233
• Durable Silicon Sleeve with EPDM outer cover
• Available in Red or Black

Part No Colour Description

Universal Plug Wire Kits
AF4030-31193 Black Multi-angle, standard & HEI cap ends
AF4530-31199 Red Multi-angle, standard & HEI cap ends
AF4030-31233 Black 90o, standard & HEI cap ends
AF4530-31239 Red 90o, standard & HEI cap ends
AF4030-32073 Black To suit GM LS
AF4530-32079 Red To suit GM LS

Direct Fit Plug Wire Sets

AF4030-32813 Black To suit GM LS 203mm (8”) short lead set
AF4530-32819 Red To suit GM LS 203mm (8”) short lead set
AF4030-32823 Black To suit GM LS 304mm (12”) long lead set
AF4530-32829 Red To suit GM LS 304mm (12”) long lead set
AF4530-31199

234 aeroflowperformance.com
 IGNITION ACCESSORIES

DIELECTRIC GREASE
Prevents voltage leaks and assists boot installation.

Part No Description
AF4030-8804 Dielectric grease

AF4030-31193

AF4530-32829
AF4030-32823 AF4030-3321 AF4530-3321

ELECTRICAL ACCESSORIES & GAUGES

AF4530-3311

AF4030-3311

AF4030-32813 AF4530-32819

AF4030-3304 AF4530-3304

AF4030-3320 AF4530-3320

AF4030-3301 AF4530-3301

XPRO BOOTS & TERMINALS 2 Packs

Part No Description
XPRO 8.5mm IGNITION LEAD WIRE ONLY BLACK Boots
AF4030-3301 Multi-angle boots and terminals
• Spiral Wound 8.5mm (21/64”) lead wire
AF4030-3320 90o HEI boots & terminals (male terminal with retainer)
• Low Resitance (40-50 ohms per foot)
AF4030-3321 90o Distributor boots & terminals (suits female terminals)
• High EMI Suppression
AF4030-3311 90o Spark plug boots & terminals (suits male terminals)
• Durable Silicon Sleeve with EPDM outer cover
AF4030-3304 45o LS Chevy coil boots and terminals
• Available in Red or Black Outer Cover
GREY Boots
AF4530-3301 Multi-angle boots and terminals
AF4530-3320 90o HEI boots & terminals (male terminal with retainer)
COLOUR 1M 5M 10M 100M AF4530-3321 90o Distributor boots & terminals (suits female terminals)
BLACK AF4030-0001 AF4030-0005 AF4030-0010 AF4030-0100 AF4530-3311 90o Spark plug boots & terminals (suits male terminals)
RED AF4530-0001 AF4530-0005 AF4530-0010 AF4530-0100 AF4530-3304 45o LS Chevy coil boots and terminals

aeroflowperformance.com 235
 IGNITION PRODUCTS

XPRO IGNITION LEAD

BOOTS ONLY 100 Packs
Part No Description (100 per pack)
BLACK Boots
AF4030-34565 Multi-angle boots ONLY (as per AF4030-3301)
AF4030-34555 90o HEI boots ONLY (as per AF4030-3320)
AF4030-34515 90o Spark plug boots ONLY (as per of AF4030-3311)
AF4030-34575 45o LS Chevy coil boots ONLY (as per AF4030-3304)
GREY Boots
AF4530-34565 Multi-angle boots ONLY (as per AF4030-3301)
AF4530-34555 90o HEI boots ONLY (as per AF4030-3320)
AF4530-34515 90o Spark plug boots ONLY (as per of AF4030-3311)
AF4530-34575 45o LS Chevy coil boots ONLY (as per AF4030-3304)
AF4530-8851
XPRO IGNITION
TERMINALS ONLY 100 Packs
Part No Description (100 per pack)
AF4030-34605 Multi-angle crimp terminal ONLY (as per AF4030-3301)
AF4030-34615 90o HEI crimp terminal ONLY (as per AF4030-3320)
AF4030-34625 45o LS Chevy crimp terminal ONLY (as per AF4030-3304)

AF4038-31333C
AF4030-8849
ELECTRICAL ACCESSORIES & GAUGES

AF4030-8850

XPRO CERAMIC BOOTS

Aeroflow Performance ceramic lead boots have been developed to address
the problems associated with burnt spark plug boots. Whether you’re
running headers with close tolerances, a turbo manifold and dump pipe with
very little room in the engine bay for heat shields or you’re just over melting
your spark plug boots from extreme heat. These black ceramic wire boots
are the answer ! They can withstand temperatures of up to 1090 degrees
Celsius ( 2000 °F ).
Available separately in packs of 2 or 8 peices in 90°, 135° and straight.
These ceramic boots will perfectly match our 8.5mm spiral wound low
resistance, high EMI suppression ignition lead and lead sets.

XPRO CERAMIC BOOTS LEAD SETS

AF4530-8850 Plug wire kits featuring Xpro ceramic boots.

Part No Description
XPRO BOOTS & TERMINALS 9 Packs
UNIVERSAL
Part No Description AF4038-31193C Straight ceramic boots with
90° silicone standard or HEI cap ends
BLACK Boots AF4038-31233C 90° ceramic spark plug boots with
AF4030-8849 90o HEI boots & terminals (male terminal with retainer) 90° silicone standard or HEI cap ends
AF4030-8851 90o Distributor boots & terminals (suits female terminals) AF4038-31333C 135° ceramic spark plug boots with
AF4030-8850 90o Spark plug boots & terminals (suits male terminals) 90° silicone standard or HEI cap ends
GREY Boots AF4038-32073C ceramic GM LS universal spark plug lead set
AF4530-8849 90o HEI boots & terminals (male terminal with retainer)
DIRECT FIT WIRE SETS
AF4530-8851 90o Distributor boots & terminals (suits female terminals)
AF4038-32813C LS ( 8” length ) 135° ceramic spark plug boots with
AF4530-8850 90o Spark plug boots & terminals (suits male terminals)
45° silicone LS Chevy coil boots.
AF4038-32823C LS ( 12” length ) 135° ceramic spark plug boots with
45° silicone LS Chevy coil boots.
236 aeroflowperformance.com
 IGNITION ACCESSORIES

AF4038-3311C-2

IGNITION LEAD MARKERS

Stop your ignition leads from getting mixed up
by using these simple numbered marker bands.

Part No Description
AF4030-3414 XPRO number lead marker bands. Set of 8. Suits
8.5mm leads comes with installation tool.

AF4038-3333C-2

AF4038-3301C-2 AF98-2071 AF98-2072

XPRO BLACK CERAMIC BOOTS

& TERMINALS 2 Pack
Part No Description
AF4038-3311C-2 90° ceramic spark plug boots and terminals AF98-2070

ELECTRICAL ACCESSORIES & GAUGES

AF4038-3333C-2 135° ceramic spark plug boots and terminals
AF4038-3301C-2 Straight ceramic spark plug boots and terminals
LEAD CRIMP TOOL
The Aeroflow ignition lead crimp tool is perfect for helping you make
professional quality crimps when assembling your ignition leads.Standard
AF4038-3333C-8 jaws suit 8.5mm (11/32”) leads.Optional jaws are avaliable to suit insulated
and non insulated electrical terminals for auto electrical applications.

Part No Description
AF98-2070 Crimp tool with 8.5mm (11/32”) lead jaws
AF59-2071 Replacement dies for lead crimp tool

OPTIONAL ELECTRICAL TERMINAL CRIMP JAWS

AF98-2071 Crimp jaws suit insulated electrical terminals
AF98-2072 Crimp jaws suit NON-insulated electrical terminals

XPRO BLACK CERAMIC BOOTS

& TERMINALS 8 Pack
Part No Description AF49-6000
AF4038-3311C-8 90° ceramic spark plug boots and terminals
AF4038-3333C-8 135° ceramic spark plug boots and terminals
AF4038-3301C-8 Straight ceramic spark plug boots and terminals

AF49-6001

LEAD SEPARATORS
Keep that jumble of ignition wires under control with Aeroflow’s great 8mm
(5/16”) to 9mm (23/64”) universal lead separators. 2 x 2, 2 x 3 and 4 x 4 hold
separators with stainless steel hardware. Can also be used with AF49-6001
anodised black universal separator fitting kit which has 6 brackets with stainless
steel hardware.
LEAD ASSEMBLY TOOL Part No Description
Part No Description AF49-6000 Bakelite lead separator kit (4x4, 2x 3, 2x2)
suits up to 9mm (23/64”) leads
AF4030-3503 XPRO Lead assembly tool for 8mm (5/16”) AF49-6001 Aluminium horizontal lead separator mounting kit
and 8.5mm (21/64”) wires suits AF49-6000

aeroflowperformance.com 237
 IGNITION ACCESSORIES

SS IGNITION COILS
Engineered with advanced bobbin technology, high turns ratio windings
encased in a protective polyurethane compound for higher energy and
voltage outputs. Results in quicker starts, improved idle quality, crisper
throttle response and cleaner high RPM power. These coils are compatible
with OEM ignition and capacitive discharge ignition systems. Coil comes
complete with vibration mounts
and terminals for easy installation.
Turns ratio: 70:1
Primary resistance: .355 ohms
FLOATING BILLET LEAD SEPARATORS Secondary resistance: 4.4K ohms
Inductance: 6.9 mH
Aeroflow billet 8.5mm (11/32”) floating lead separators keep your leads Maximum voltage: 40,000 Volts
spaced nicely and routed correctly. Available in polished or black anodised Peak Current: 300 Ma
aluminium finish. Sold in pairs. Spark Duration: 220 uS

Part No Description
AF64-9752 Polished 2 wire lead separators
AF64-9752BLK Black 2 wire lead separators
AF64-9753 Polished 3 wire lead separators
AF64-9753BLK Black 3 wire lead separators Part No Description
AF64-9754 Polished 4 wire lead separators
AF64-9754BLK Black 4 wire lead separators AF4020-8207 SS ignition coil with male terminal & vibration mounts

IGNITION
COILS
ELECTRICAL ACCESSORIES & GAUGES

Excellent High performance

replacement for import and
local vehicles with a canister
type oil filled ignition coil.
BILLET LEAD SEPARATORS Re-Engineered windings for
even faster throttle response
Aeroflow billet 8.5mm (11/32”) lead separators keep your leads spaced nicely, and higher RPM power.
keeping them away from exhaust and routed correctly. Available in polished Aeroflow’s XPRO Coil is
or black anodised aluminium finish. These mount using the rocker cover effective to over 10,000 RPM.
bolts, extended fasteners are included. Sold in pairs. Available in male terminal type
and female socket types in black
Part No Description or chrome finishes. Mounting options 2-9/64”
available separately are AF42-1250 (54.4mm)
AF64-9702 Polished 2 wire lead separators (stainless Steel coil mount) or AF64-2900 (polished billet alloy) or diameter
AF64-9702BLK Black 2 wire lead separators AF64-2900BLK (black anodised billet alloy).
AF64-9703 Polished 3 wire lead separators SPECIFICATIONS:
AF64-9703BLK Black 3 wire lead separators PRIMARY RESISTANCE 0.7 ohms
AF64-9704 Polished 4 wire lead separators SECONDARY RESISTANCE 5.6k ohms
AF64-9704BLK Black 4 wire lead separators FREQUENCY 236hz
MAXIMIM VOLTAGE 45,000 volts

Part No Finish Description

AF4220-8202 Black Round canister female socket type ignition coil
AF4820-8202 Chrome Round canister female socket type ignition coil
AF4220-8223 Black Round canister male terminal type ignition coil
AF4820-8223 Chrome Round canister male terminal type ignition coil

STAINLESS COIL
FIREWALL FEED THROUGH MOUNT BRACKET
If you have your coil mounted in the passenger compartment, you need the Aeroflow coil mounting bracket offers
Aeroflow Performance firewall feed through. These are specifically designed easy, universal mounting for standard
to ensure that the spark gets to the distributor cap instead of jumping to sized ignition coils that are 56mm
ground at the firewall and the voltage leaks into the passenger compartment. (2-13/64”) diameter. The bracket is ID
A 12.7mm ( 1/2” ) brass rod is surrounded by an injection mould of rynite made from stainless steel then polished
and nylon housing to form a spark isolating path through the firewall. This and chrome plated.
feed through requires only a 25.4mm ( 1” ) diameter hole to mount directly Overall length 95mm (3-3/4”)
to the firewall with spark plug style terminals on both ends used for strong Height 74mm (2-59/64”)
coil wire connections. Width 30mm (1-3/16”)
Ø to Ø is 66mm (2-19/32”)
Part No Description
Part No Colour Description ID
AF4020-8212 Firewall Feed Through
AF42-1250 Chrome Canister coil mount 56mm 2-13/64”

238 aeroflowperformance.com
 IGNITION ACCESSORIES

AF64-4032

BILLET COIL MOUNT FOR

AEROFLOW COILS
Aeroflow coil mounting bracket offers easy, universal mounting for Aeroflow
ignition coils that are 54.4mm (2-9/64”) diameter. The bracket is available in
polished and shiny black anodised finishes.
Overall length 113mm (4-7/16”)
Height 70mm (2-3/4”)
Width 25mm (63/64”)
Ø to Ø is 96mm (3-25/32”)

Part No Colour Description ID

AF64-2903 Polished Canister coil mount 54.4mm (2-9/64”)
AF64-2903BLK Black Canister coil mount 54.4mm (2-9/64”)

GM LS SERIES
BILLET COIL
RELOCATION MOUNTS
Aeroflow have developed a light weight and versatile solution to relocating

ELECTRICAL ACCESSORIES & GAUGES

your LS series style coils. Perfect for conversions or simply running remote
coils. Coil mounts can be split to run 2 or 4 coils mounted side by side. Stylish
and functional CNC machined from Billet 6061-T6 aluminium.

Part No Colour To Suit Bolt Spacing

AF64-4032 Chrome LS1 & LS6 mounts 65mm 2-9/16”
BILLET COIL MOUNT FOR MSD COILS AF64-4032BLK
AF64-4034
Black
Chrome
LS1 & LS6 mounts
LS2, LS3 & LS7 mounts
65mm
72mm
2-9/16”
2-53/64”
Aeroflow coil mounting bracket offers easy, universal mounting for standard
AF64-4034BLK Black LS2, LS3 & LS7 mounts 72mm 2-53/64”
sized ignition coils that are up to 55mm (2-11/64”) diameter. The bracket is
available in polished and shiny black anodised finishes.
Overall length 113mm (4-7/16”)
Height 70mm (2-3/4”)
Width 25mm (63/64”)
Ø to Ø is 96mm (3-25/32”)

Part No Colour Description ID

AF64-2900 Polished Canister coil mount 55mm 2-11/64”
AF64-2900BLK Black Canister coil mount 55mm 2-11/64”

GM LS COIL EXTENSION HARNESSES

These harnesses are designed to extend from your OEM harness to your coil
harness when you have relocated your coils further away.

Part No Description
AF49-1509 460mm (18”) long
GM LS IGNITION COILS AF49-1510 1170mm (46”) Long
Aeroflow now offer a powerful performance upgrade for the Chev LS Engine.
These coils are a direct bolt-in and are engineered with high quality internal
materials and components for coils that will produce higher voltage and spark
energy. The coils are available to suit LS1, LS2, LS3, LS4, LS6, LS7 and LS9
series engines. SOLD INDIVIDUALLY

Part No Description
AF4020-8262 will suit LS1 & LS6 series (Single coil)
AF4020-8265 will suit LS2, LS3, LS4, LS7 & LS9 series (single coil)

aeroflowperformance.com 239
 IGNITION ACCESSORIES

AF49-1504

GM LS2 COIL OEM HARNESS

Aeroflow Performance EFI LS2 Coil Sub Harness. This coil sub harness is
intended to be used with factory LS2 coils with the factory GM Coil-on-plug
connectors. Sold Individually.

GM LS1 COIL HARNESSES Part No Description

Aeroflow Performance EFI LS1 Coil Sub Harness. This coil sub harness is
AF49-1534 GM LS2 OEM Coil harness
intended to be used with factory LS1 coils with the factory GM Coil-on-plug
connectors. These sub-harnesses allow for custom coil brackets that place
coils closer together or in a different position besides the factory location.
Available in OEM length, designed to be a complete plug and play. Sold
Individually.

Part No Description
AF49-1504 OEM Fitment
ELECTRICAL ACCESSORIES & GAUGES

GM LS2 COIL PLUGS (4 Pack)

These Aeroflow Performance 4 pin ignition coil pack automotive plugs are
used with GM series LS2 engines or when you wish to convert over to the
GM LS1 COIL PLUG & PINS later model coil packs on any conversions. The set of 4 pre-terminated coil
plug looms allow easy installation on current wiring without the need to crimp.
The Aeroflow Performance GM LS1 coil plug is a great solution when re Perfect for those that are replacing worn damaged connectors or for those
wiring the car for a fresh start or you wish to make new extension harnesses creating a new loom due to relocating coils.
yourself when relocating the coil packs. Over time with heat these plugs can NOTE: Extra pins supplied to create a custom loom.
become brittle and break apart so it’s a great idea to replace them to avoid
any unwanted misfiring issues
Part No Suits
Part No Suits AF49-1535 LS2 Coil plugs. (4 Pack)

AF49-1525 GM LS1 coil plug (1 plug per pack)

GM HOLDEN USING
CHEVY ALTERNATOR MOUNTING KIT
When you mount a Chevy alternator to a Holden engine its close but not quite
right. Aeroflow have developed a spacer kit to get the fitment and belt align-
ment perfect. This adapter kit allows the use of Aeroflow Chev 100, 120 and
140 AMP alternators to be mounted to any Holden V8 and even the Holden 6
Cylinder, originally fitted with a Bosch alternator.

Part No Description
AF4000-1000 Chevy to Holden Alternator mounting kit.

240 aeroflowperformance.com
 ALTERNATORS

How to chorn ose

ator
the right alte
see page 433 AF4076-1500

AF4873-1140 AF4090-1500

AF4870-1100

AF4072-1500

ELECTRICAL ACCESSORIES & GAUGES

AF4071-1500
AF4075-1500 AF4074-2000

AEROFLOW ALTERNATORS
Performance 1 wire self exciting alternator available from 100 up to 200 amp
depending on model. See alternator spec sheet on page 433 for information
REPLACEMENT PARTS
on choosing the correct alternator to suit your needs.
Part No Description
Part No Description - To Suit Finish
AF4079-1000 Regulator
GM LS Series( Non ECU controlled) AF4079-1001 Rectifier
AF4074-2000 200AMP LS Alternator Natural AF4079-1002 Brush set
AF4274-2000 200AMP LS Alternator Black AF4079-1003 Brush holder assembly
AF4079-1004 Self exciting diodes
CHEVY
AF4870-1100 100AMP Chevy Alternator Chrome AF4079-1001
AF4270-1100 100AMP Chevy Alternator Black
AF4870-1120 120AMP Chevy Alternator Chrome
AF4270-1120 120AMP Chevy Alternator Black
AF4870-1140 140AMP Chevy Alternator Chrome
AF4270-1140 140AMP Chevy Alternator Black
FORD
AF4873-1100 100AMP Ford Alternator Chrome
AF4273-1100 100AMP Ford Alternator Black
AF4873-1140 140AMP Ford Alternator Chrome
AF4079-1000
AF4273-1140 140AMP Ford Alternator Black AF4079-1004 AF4079-1003
NISSAN RB20/25/26/30
AF4072-1500 150AMP Nissan RB Alternator Natural
AF4272-1500 150AMP Nissan RB Alternator Black
NISSAN SR20
AF4071-1500 150AMP Nissan RB Alternator Natural
AF4271-1500 150AMP Nissan RB Alternator Black
MITSUBISHI 4G63
AF4075-1500 150AMP Mitsubishi 4G63 Alternator Natural
AF4275-1500 150AMP Mitsubishi 4G63 Alternator Black
TOYOTA 1JZ / 2JZ
AF4076-1500
AF4276-1500
150AMP Toyota Alternator
150AMP Toyota Alternator
Natural
Black ALTERNATOR PLUG
MAZDA 13B (Series 4/5) This Aeroflow Performance alternator 2 pin plug is designed to plug straight
AF4079-1500 150AMP Mazda 13B Alternator Natural into the Ford and Chevy model alternators. This pigtail loom is pre-terminated
AF4279-1500 150AMP Mazda 13B Alternator Black with the ignition input wire and the voltage sensing wire.
MAZDA 13B (Series 6)
AF4078-1500 150AMP Mazda 13B Alternator Natural Part No Description
AF4278-1500 150AMP Mazda 13B Alternator Black
AF49-1530 Alternator 2 pin plug with wire.

aeroflowperformance.com 241
 STARTER MOTORS

AF4250-5308 AF4250-5414
HOLDEN V8 GM LS Series AF4250-5055
AF4250-5323 Chevy FORD 289 - 302 - 351W &
CHEVY 153 - 158
351C with auto trans
tooth, straight mount
ELECTRICAL ACCESSORIES & GAUGES

AF4250-1337
CHRYSLER S/B & B/B only suits
TF727 trans, 122 tooth ring gear.
for 130 tooth replace gear with
AF4259-ND19509

1.4KW / 1.9HP HIGH TORQUE

STARTER MOTORS
Aeroflow Nippon Denso style high torque starter motors are serviceable
and manufactured from aluminium with a multi-angle mounting block that
allows different mounting positions to clear multiple header and oil pan
configurations. The 1.4kw / 1.9hp starter is recommended for engines up to
AF4250-9109
400cu and 14:1 compression ratio and utilizes a 4.44:1 gear reduction.
Aeroflow starter motors have high heat resistance and are powdercoated
black for extra corrosion protection.
NEW
Part No Description suits
COMPACT
AF4250-5323
AF4250-5414
Chevy 153 - 168 tooth, straight mount (Includes bolts)
GM LS Series Chevy (Includes bolts)
DESIGN
AF4250-5308 Holden V8 (Includes bolts)
AF4250-1337 Chrysler S/B & B/B only suits TF727 trans, 122 tooth
AF4250-5055 Ford 289 - 302 - 351W & 351C with auto trans 175mm
NOTE: FORD auto starter can be used on manual (6-1/32”)
trans with use of adapter AF4259-5051

AF4250-5310
1.4KW / 1.9HP HIGH TORQUE
COMPACT STARTER MOTORS
Aeroflow Hitachi style high torque starter motors are serviceable and
manufactured from aluminium with a multi-angle mounting block that
allows different mounting positions to clear multiple header and oil pan
configurations. The 1.4kw / 1.9hp starter is recommended for engines up to
400cu and 14:1 compression ratio and utilizes a 4.44:1 gear reduction.
Aeroflow starter motors have high heat resistance and are powdercoated
black for extra corrosion protection.

Part No Description suits

68mm
(2-43/64”) 175mm AF4250-9109 GM LS Series Chevy compact design (Includes bolts)
AF4250-5310 Holden V8 compact design (Includes bolts)
(6-1/32”)

242 aeroflowperformance.com
 STARTER MOTORS

AF4250-5323M
Super Torque
CHEVY 153 - 158 tooth, straight mount AF4250-5414M Super Torque
AF4250-5055M Super Torque GM LS Series Chevy
FORD 289 - 302 - 351W & 351C with auto trans

ELECTRICAL ACCESSORIES & GAUGES

AF4250-5308M Super Torque
Holden V8

2KW / 2.7HP SUPER TORQUE

STARTER MOTORS
Aeroflow Nippon Denso style high torque starter motors are serviceable and
manufactured from aluminium with a multi-angle mounting block that allows
different mounting positions to clear multiple header and oil pan configurations.
The 2kw / 2.7hp starter is recommended for 400cu + engines and up to 15:1
compression ratio it utilizes a 2.86:1 gear reduction. It is also slightly longer
in length than the 1.9hp starter. Aeroflow starter motors have high heat
resistance and are powdercoated black for extra corrosion protection.

Part No Description suits

AF4250-5323M Chevy 153 - 168 tooth, straight mount (Includes bolts)
AF4250-5414M GM LS Series Chevy (Includes bolts) AF4259-ND19509
AF4250-5308M Holden V8 (Includes bolts)
AF4250-5055M Ford 289 - 302 - 351W & 351C with auto trans AF4259-IG16802

NOTE: FORD auto starter can be used on manual

trans with use of adapter AF4259-5051

AF4259-19606KIT
AF4259-AG16802
AF4259-545V

STARTER MOTORS SERVICE PARTS

Part No Description suits
AF4259-323DE Chevy end plate suit straight mount starter
AF4259-323DE AF4259-048DE AF4259-308DE Holden V8 end plate
AF4259-414DE GM LS Series Chevy end plate
AF4259-048DE Ford end plate
AF4259-5051 Ford auto to manual starter conversion spacer
AF4259-ND19509 Pinion gear suit GM & Ford starters
AF4259-ND19743 Pinion gear suit Chrysler starter
AF4259-19606KIT 1.4KW / 1.9HP Solenoid repair kit
AF4259-19750KIT 2KW / 2.7HP Solenoid repair kit
AF4259-5051 AF4259-545V 1.4KW / 1.9HP Clutch assembly
AF4259-IG16802 1.4KW / 1.9HP Idler gear
AF4259-AG16802 2KW / 2.7HP Armature gear
AF4259-GM53SK GM type starter shim & bolt kit
AF4259-GM53SK

aeroflowperformance.com 243
 ELECTRICAL ACCESSORIES

BATTERY TRAY
Aeroflow’s Battery Trays are the perfect mounting solution for those planning
to add a second battery, or even relocate or provide a better support and
BILLET OPTIMA BATTERY TRAYS base for an existing battery. It has recessed slots in base so the battery does
not make contact with tray fasteners. Dimensions 185mm (7-9/32”) x 280mm
Aeroflow Performance billet battery hold down trays are now available to suit (11”). Designed to suit comon battery sizes up to N50.
the popular optima batteries both red top and yellow tops. Machined from
6061 billet aluminium for strength our battery mount holds the battery firmly Part No Description
in place and provide a rigid base to mount to the vehicle. With a recessed
bottom to lock the battery into place and dimensions width of 247mm, depth AF49-4053 Aeroflow plastic battery tray
165mm and height 165mm. it is available in both chrome and black anodised.

Part No Suits Battery Dimensions

Wide High Deep
AF64-4366 247mm (9-47/64”) x 165mm (6-31/64”) x 165mm (6-31/64”)
AF64-4366BLK 247mm (9-47/64”) x 165mm (6-31/64”) x 165mm (6-31/64”)

Part No Colour Description

AF64-4366 Polished Suit Optima red and yellow top
ELECTRICAL ACCESSORIES & GAUGES

AF64-4366BLK Black Suit Optima red and yellow top

BATTERY HOLD
DOWN CLAMP
Aeroflow’s Battery Hold Down Clamp includes bolts,
washers and wingnuts. Bolt hole centre to centre
175mm (6-7/8”) and 250mm (9-27/32”) bolt length.

Part No Description
AF49-4054 Aeroflow Battery hold down clamp
(Clamp is stretchable HD rubber)

BILLET ODYSSEY BATTERY TRAYS

Aeroflow Billet Battery Hold Down trays are available in polished alloy and
black anodised finishes. Machined from 6061-T6 aluminium. Our trays suit
both Odyssey and Powermaster batteries.

Part No Suits Battery Dimensions

Wide High Deep
AF64-2100 185mm (7-9/32”) x 170mm (6-11/16”) x 79mm (3-1/8”)
AF64-2101
AF64-2102
170mm (6-11/16”) x 130mm (5-7/64”) x 177mm (6-31/32”)
200mm (7-7/8”) x 170mm (6-11/16”) x 170mm (6-11/16”) BATTERY BOX
Aeroflow’s Battery Box is ideal for protecting your battery from dirt, dust,
Part No Colour Description moisture and allows correct ventilation. The battery box includes an
adjustable tie down strap, allows multiple entry points for battery leads.
AF64-2100 Polished Suit Odyssey ODPC680 (PC680) Made from high-impact propylene plastic.
AF64-2100BLK Black Suit Odyssey ODPC680 (PC680) Inside dimensions size 260mm (10-15/64”) x 180mm (7”) x 200mm (7-7/8”)
AF64-2101 Polished Suit Odyssey ODPC925MJT (PC925) size of the contour 340mm (13-3/8”) x 245mm (9-41/64”) x 200mm(7-7/8”)
AF64-2101BLK Black Suit Odyssey ODPC925MJT (PC925)
AF64-2102 Polished Suit Odyssey ODPC1200 (PC1200)
AF64-2102BLK Black Suit Odyssey ODPC1200 (PC1200) Part No Description
AF49-4052 Aeroflow plastic battery box

244 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

BATTERY ISOLATOR SWITCH

These Aeroflow battery disconnect switches are designed to isolate the
battery circuit and provide anti-theft and fire protection. They also include a
detachable key and weather-resistant cap and are ideal for mobile campers,
ENGINE START SWITCH KIT
marine, and farm equipment use. Use the Aeroflow battery disconnect
switches to shut off all current to your battery and be safe no matter where Part No Description
your vehicle is.
1000Amp @12V for 5 sec. AF49-5555 12V engine start switch comes with red, orange, blue &
500Amp @24V for 5 sec green button covers. Requires 25mm mounting hole.
100Amp @12V for maximum continuous load.
50Amp @24V for maximum continuous load.

Part No Description
AF49-4050 12V battery isolator switch with red key
AF49-4056 Replacement red key and dust boot ONLY

ELECTRICAL ACCESSORIES & GAUGES

MISSILE SWITCHES WITH COVER
BRASS ISOLATION TERMINAL Aeroflow Rocket switches are available with coloured covers. They will control
virtually any accessory you can throw at them from ignitions, boost, fans,
Aeroflow’s Brass Isolating Battery terminal is perfect for disconecting the lights, winches, NOS systems and more! Easy to use, lift the cover and flick
battery without removing the terminal. Simply unscrew the green knob to the toggle switch up for the on position and to turn off the switch, simply push
isolate or reconnect the battery. Suits Negative large style terminal. the cover down!
Pefect for storage of Automotive and Marine vehicles.
Part No Description Colour
Part No Description AF49-5000 On / Off missile switch Red
AF49-4055 Aeroflow Battery isolation Terminal AF49-5001 On / Off missile switch Blue
AF49-5002 On / Off missile switch Carbon Fibre
AF49-5003 On / Off missile switch White
AF49-5004 On / Off missile switch Yellow
AF49-5005 On / Off missile switch Green

LED MISSILE SWITCHES WITH COVER

UNIVERSAL SWITCH PANEL Aeroflow Rocket switches are now available in LED and colour coded covers.
They will control virtually any accessory you can throw at them from ignitions,
boost, fans, lights, winches, NOS systems and more! These have a true 12V
The Aeroflow Performance switch panel features a dedicated momentary
LED switch in the casing which means you do not need to add additional re-
start button, 4 x on/off switches and 2 x USB ports attached onto an
sistors typical with some other LED lighted products. Easy to use, lift the cover
aluminium flat mounting panel. The high-tech rocker style switches are
and flick the toggle switch up for the on position and to turn off the switch,
dust and water resistant, feature a wide profile face for use with racing
simply push the cover down!
gloves, a heavy-duty spring for positive engagement, various coloured LED
indicator lamps, and 1/4” spade terminals to simplify wire connections with
a two wire hook. A switch decal package is also included to indicate start, Part No Description Colour
ignition, fuel, fan, lights, nitrous and other uses for each switch. Note: It
is recommended to use a circuit breaker and fuse which are not included AF49-5050 On / Off missile switch with Red LED Red
in this kit. Length 180mm (7-5/64”), Width 65mm (2-35/64”), Depth 45mm AF49-5010 On / Off missile switch with Blue LED Blue
(1-49/64”). AF49-5020 On / Off missile switch with White LED Carbon Fibre
AF49-5030 On / Off missile switch with White LED White
Part No AF49-5040 On / Off missile switch with Yellow LED Yellow
Description AF49-5055 On / Off missile switch with Green LED Green
AF49-8000 Universal switch panel

aeroflowperformance.com 245
 ELECTRICAL ACCESSORIES

AF49-1500
8 circuit wiring harness

AF49-1502 21 circuit wiring harness

UNIVERSAL WIRING HARNESS

Aeroflow Performance range of universal wiring harnesses complete with
fuse box, relays and fuses. Each wire is colour coded and labelled every
ELECTRICAL ACCESSORIES & GAUGES

6 inches (152.4mm ) for the entire length to allow ease of installation in

any car, hot rod or race car. These 8, 12 or 21 circuit wiring harnesses will
wire up heater, air conditioning , wiper motor, various accessories, turn/
hazard signal, relay output, brake switch, instrument cluster and more. The
included fuse box is compact perfect for installation in confined areas.

Part No
AF49-1501
AF49-1500 8 circuit wiring harness
12 circuit wiring harness
AF49-1501 12 circuit wiring harness
AF49-1502 21 circuit wiring harness (Fuse box cover NOT included)

UNIVERSAL SINGLE FAN RELAY UNIVERSAL DUAL FAN RELAY

Aeroflow’s Performance single fan relay and wiring harness kit is essential Aeroflow’s Performance dual fan relay and wiring harness kit is essential
with an electric fan setup. This universal kit will prevent voltage drops and with an twin electric fan setup. This universal kit will prevent voltage drops
amperage overloads which can cause havoc to your electrical system. It and amperage overloads which can cause havoc to your electrical system.
includes 1 x automotive 12 volt 40 amp relay, 1 x 30 amp circuit breaker, It includes 2 x automotive 12 volt 40 amp relays, 2 x 30 amp circuit breaker,
3/8 NPT thermostat probe turn fan on at 85oC (185oF) and switches it off 3/8 NPT thermostat probe turn fan on at 85oC (185oF) and switches it off
at 76oC (169oF), all crimp fittings and a prewired relay block for ease of at 76oC (169oF), all crimp fittings and a prewired relay blocks for ease of
installation. installation.

Part No Description Part No Description

AF49-1006 Single fan relay AF49-1048 Dual fan relay

246 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

UNIVERSAL RELAY WEATHERPACK FUSE HOLDER

AND WIRING KIT Aeroflow’s weatherpack fuse holder lets you easily splice in a 30 amp inline
blade fuse. The weatherpack housing protects the fuse from the
Aeroflow Performance universal relay and wiring harness kit is a must elements so its great for use inside or outside of the vehicle.
have for any upgrade in addition to your fuel system or electrical water Suits 12 awg wire. Includes standard blade 30amp fuse.
pump upgrade. This universal kit will prevent voltage drops and amperage
overloads which can cause havoc to your electrical system. It includes 1
x automotive 12 volt 40 amp relay, 1 x 30 amp circuit breaker, all crimp
Part No Description
fittings and a prewired relay blocks for ease of installation. AF49-1507 Weatherpack 30amp fuse holder

Part No Description
AF49-1038 Electric fuel & water pump relay and wiring kit

ELECTRICAL ACCESSORIES & GAUGES

WEATHERPACK
RELAY
Aeroflow’s weatherpack relay comes with relay holder and terminals. The
weatherpack housing protects the fuse from the elements so its great for
use inside or outside of the vehicle.
Suits 12 awg wire. Includes 30amp relay. ELECTRICAL BULKHEAD CONNECTOR
The Aeroflow Performance electrical bulkhead 6 pin connector is a quality
Part No Description component to wire your fuel pump in your fuel cell project in a safe way to
ensure no leaks or fumes escape. The connector kit is rated up to 40a to
AF49-1508 Weatherpack 30amp relay kit
supply enough juice to power all aftermarket fuel pumps. The terminals are
AF59-1508 30amp relay ONLY
intended for use with 14-10AWG wires. The terminals are easily installed or
de-pinned with ease using basic hand tools and each connector is separate
making installation a breeze. This kit includes a weld-in aluminium bung for
the bulkhead connector, a Viton O-ring to seal the bulkhead to the bung,
and a snap-ring to secure the bulkhead safely in place. Internal and external
connectors are included, along with 12 crimp terminals.
-Max diameter of bung 56mm (2-13/64”)
-Minimum Panel hole 49.9mm (1-61/64”)

PUSH IN FUSIBLE LINK POWER FEED

Aeroflow’s fusible link allows you to piggy back a fuse position on your fuse
25mm (63/64”)

box to draw power without any splicing. Simply remove a mini blade fuse
and insert the link in its place like a double adapter, now this splits the circuit
into two fused circuits. Includes 30amp mini blade fuse.
57mm (2-15/64”)

Part No Description
16mm (5/8”)

12.7mm

AF49-1511 Push in fusible link 10 PACK

(1/2”)
16mm (5/8”)

ELECTRICAL
TERMINAL BULK HEAD 33mm (1-19/64”)

49.9mm (1-61/64”)

56mm (2-13/64”)
Designed to conduct power or earth through a panel (minimum 4mm thick) or
closed area.Through bolt design with nylon stepped washers. Perfect for use
in powering intank pumps to original fuel tanks.
Part No Suits
Part No Description AF49-4049 Electrical bulkhead connector
AF49-4051 Through panel terminal or earth (1 per pack)

aeroflowperformance.com 247
 ELECTRICAL ACCESSORIES

AF49-1506
ELECTRICAL ACCESSORIES & GAUGES

GM LS3 WIRING HARNESS ( MANUAL TRANSMISSION )

This Aeroflow Performance wiring harness is designed to be a complete plug and play harness for EFI GM LS3 and LSX series engines using a 58 tooth crank
sensor. It is a complete standalone replacement wiring harness that suits GM LS3 and LSX engines ( 2006 and newer ) with Fly By Wire throttle body and T56
manual transmissions or non-electronic controlled automatic transmissions. Perfect for retrofitting into older muscle cars and street rods or newer non-emissions
controlled vehicles with a four wire hook-up (switched power, constant power and ground connections). The harness features a sliding grommet seal for a leak
proof installation and 1.2 to 1.5 meters (3.9 to 4.9 feet) of length from the rear of the cylinder head to the ECM mounting position under the vehicle dashboard.
The harness is constructed with GM Delphi connectors and terminals and high temperature wires. It includes all wiring that is required by the Engine Control
Module ( ECM ) to run and control the fuel injection system.
CONNECTIONS INCLUDED FOR:
• Fuse/Relay Box
• Fuel Pump Control (Relay included)
• Fan controls ( Relays and fuse Sold Separately )
• Check Engine Light, Speedo output, Tachometer, OBD2 Port
• Throttle Body
• Accelerator Pedal
• Mass Air Flow Sensor ( 3 Pin )
• Manifold Absolute Pressure Sensor
• Engine Coolant Temp Sensor
• Alternator Control ( 4 Pin )
• Oxygen Sensors ( x 2 )
• Knock Sensor
• Crankshaft Position
• Camshaft Position ( Non VVT only )
• Fuel Injectors ( USCAR Plugs )
• Coil Packs
• Vehicle Speed Sensor

Part No Suits
AF49-1506 GM LS3 with manual transmission
AF49-1590 Replacement firewall grommet

248 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

ELECTRICAL ACCESSORIES & GAUGES

AF49-1505

GM LS1 WIRING HARNESS ( AUTOMATIC TRANSMISSION )

This Aeroflow Performance wiring harness is designed to be a complete plug and play harness for EFI GM LS1/
LS6 series engines. It is a complete standalone replacement wiring harness that suits GM LS1 engines ( 1997 to
2002 ) with drive by cable throttle body and 4L60E or 4L80E automatic transmissions. Perfect for retrofitting into
older muscle cars and street rods or newer non-emissions controlled vehicles with a four wire hook-up (switched
power, constant power and ground connections). The harness features a sliding grommet seal for a leak proof
installation and 1.2 to 1.5 meters (3.9 to 4.9 feet) of length from the rear of the cylinder head to the PCM mounting
position under the vehicle dashboard. The harness is constructed with GM Delphi connectors and terminals and
high temperature wires. It includes all wiring that is required by the Powertrain Control Module ( PCM ) to run and
control the fuel injection system and automatic transmission.
CONNECTIONS INCLUDED FOR:
• Fuse/Relay Box
• Fuel Pump Control (Relay included)
• Fan controls ( Relays and fuse Sold Separately )
• Check Engine Light, Speedo output, Tachometer, OBD2 Port
• Idle Air Control and Throttle Position Sensor
• Mass Air Flow Sensor ( 3 Pin )
• Manifold Absolute Pressure Sensor
• Engine Coolant Temp Sensor
• Alternator Control ( 4 Pin )
• Oxygen Sensors ( x 2 )
• Knock Sensor
• Crankshaft Position
• Camshaft Position
• Fuel Injectors ( EV1 Plugs )
• Coil Packs
• Automatic Transmission control

Part No Suits
AF49-1505 GM LS1 with automatic transmission
AF49-1590 Replacement firewall grommet

aeroflowperformance.com 249
 ELECTRICAL ACCESSORIES

AF49-1512
ELECTRICAL ACCESSORIES & GAUGES

GM LS1 WIRING HARNESS ( MANUAL TRANSMISSION )

This Aeroflow Performance wiring harness is designed to be a complete plug and play harness for EFI GM LS1/LS6 series engines. It is a complete standalone
replacement wiring harness that suits GM LS1 engines ( 1997 to 2002 ) with drive by cable throttle body and T56 manual transmissions or non-electronic
controlled automatic transmissions. Perfect for retrofitting into older muscle cars and street rods or newer non-emissions controlled vehicles with a four wire hook-
up (switched power, constant power and ground connections). The harness features a sliding grommet seal for a leak proof installation and 1.2 to 1.5 meters (3.9
to 4.9 feet) of length from the rear of the cylinder head to the PCM mounting position under the vehicle dashboard. The harness is constructed with GM Delphi
connectors and terminals and high temperature wires. It includes all wiring that is required by the Powertrain Control Module ( PCM ) to run and control the fuel
injection system.
CONNECTIONS INCLUDED FOR:
• Fuse/Relay Box
• Fuel Pump Control (Relay included)
• Fan controls ( Relays and fuse Sold Separately )
• Check Engine Light, Speedo output, Tachometer, OBD2 Port
• Idle Air Control and Throttle Position Sensor
• Mass Air Flow Sensor ( 3 Pin )
• Manifold Absolute Pressure Sensor
• Engine Coolant Temp Sensor
• Alternator Control ( 4 Pin )
• Oxygen Sensors ( x 2 )
• Knock Sensor
• Crankshaft Position
• Camshaft Position
• Fuel Injectors ( EV1 Plugs )
• Coil Packs
• Vehicle Speed Sensor
• Reverse Lockout Sensor

Part No Suits
AF49-1512 LS1 Standalone wiring harness
AF49-1590 Replacement firewall grommet

250 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

AF49-1504

GM LS2 COIL OEM HARNESS

Aeroflow Performance EFI LS2 Coil Sub Harness. This coil sub harness is
intended to be used with factory LS2 coils with the factory GM Coil-on-plug
connectors. Sold Individually.

GM LS1 COIL HARNESSES Part No Description

Aeroflow Performance EFI LS1 Coil Sub Harness. This coil sub harness is
intended to be used with factory LS1 coils with the factory GM Coil-on-plug AF49-1534 GM LS2 OEM Coil harness
connectors. These sub-harnesses allow for custom coil brackets that place
coils closer together or in a different position besides the factory location.
Available in OEM length, designed to be a complete plug and play. Sold
Individually.

Part No Description
AF49-1504 OEM Fitment

ELECTRICAL ACCESSORIES & GAUGES

GM LS2 COIL PLUGS (4 Pack)
These Aeroflow Performance 4 pin ignition coil pack automotive plugs are
used with GM series LS2 engines or when you wish to convert over to the
later model coil packs on any conversions. The set of 4 pre-terminated coil
plug looms allow easy installation on current wiring without the need to crimp.
Perfect for those that are replacing worn damaged connectors or for those
creating a new loom due to relocating coils.
Note: Extra pins supplied for custom looms.
GM LS1 COIL PLUG & PINS
The Aeroflow Performance GM LS1 coil plug is a great solution when re Part No Suits
wiring the car for a fresh start or you wish to make new extension harnesses
yourself when relocating the coil packs. Over time with heat these plugs can AF49-1535 LS2 Coil plugs. 4 Pack
become brittle and break apart so it’s a great idea to replace them to avoid
any unwanted misfiring issues

Part No Suits
AF49-1525 GM LS1 coil plug (1 plug per pack)

UNIVERSAL ELECTRICAL DE-PIN KIT

The Aeroflow Performance electrical connector terminal de-pin kit is one of
GM LS COIL EXTENSION HARNESSES the handiest additions to your tool kit. The de-pin kit enables you to eject the
terminals out of connector easily and without damaging the terminal, wire or
These harnesses are designed to extend from your OEM harness to your coil connector.
harness when you have relocated your coils further away.
Part No Description
Part No Description
AF49-8552 Universal electrical terminal De-Pin kit
AF49-1509 460mm (18”) long
AF49-1510 1170mm (46”) Long
aeroflowperformance.com 251
 ELECTRICAL ACCESSORIES

AF49-1515
AF49-1514

FLY BY WIRE EXTENSION HARNESS

Designed to suit VZ-on LS based engines with the fly-by-wire throttle body,
this extension harness is perfect for aftermarket Hi-Rise manifold where the
original wiring simply will not reach.
Will not suit 5.7L VZ Commodore. O2 SENSOR EXTENSIONS
The Aeroflow Performance oxygen sensor extensions are a must when
Part No Suits upgrading the exhaust and the O2 sensors are moved further away from their
factory OE location. They feature an OEM design that plugs right into the OE
AF49-1516 VZ-on LS fly by wire extension harness sensor harness on one end and the O2 sensor on the other with no cutting
or splicing required. Made from high temperature resistant wiring and with a
fire retardant shielding for added protection against the heat from the exhaust
system. Designed to be a plug and plug in Holden Commodore early VT and
late VY, VZ & VE.

Part No Suits Total length Inc Plugs

AF49-1514 Late VY, VZ & VE O2 sensor extension 360mm (14-11/64”)
AF49-1515 VT to early VY O2 sensor extension 360mm (14-11/64”)
ELECTRICAL ACCESSORIES & GAUGES

INJECTOR ADAPTERS
The Aeroflow Performance range of injector harness adapters are an easy
plug and play solution which requires no wiring. Gone are the days of having
to splice, crimp or solder wires to make a mess of your wiring and cause
VE AIR INTAKE SENSOR HARNESS potential wiring issues in the future. These OE quality adapters come in a
range of different varieties to suit many different applications.
Designed to suit the VE commodore air intake sensor when deleting the MAF
sensor for aftermarket engine tunes.

Part No Suits
AF49-1513 VE air intake sensor harness

EV1 INJECTOR TO USCAR PLUG ADAPTOR

Quick and easy adapting solution when fitting injectors that have an EV1 plug
and the engine harness has USCAR injector plug.

Part No Suits
AF49-1517 EV1 to USCAR

USCAR INJECTOR TO EV1 PLUG ADAPTOR

Quick and easy adapting solution when fitting injectors that have an USCAR
plug and the engine harness has EV1 injector plug.

Part No Suits
AF49-1518 USCAR to EV1

252 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

BOSCH INJECTOR TO USCAR PLUG

ADAPTOR
Quick and easy adapting solution when fitting injectors that have a Bosch
DENSO INJECTOR TO USCAR PLUG ADAPTOR plug and the engine harness has USCAR injector plugs. End to End length :
100mm (3-15/16”).
Quick and easy adapting solution when fitting injectors that have an Denso
style plug and the engine harness has USCAR injector plug.
Part No Suits
Part No Suits AF49-1602 Bosch injector to USCAR plug adaptor
AF49-1519 Denso to USCAR

USCAR INJECTOR TO NISSAN PLUG

ADAPTOR

ELECTRICAL ACCESSORIES & GAUGES

Quick and easy adapting solution when fitting injectors that have a USCAR
USCAR INJECTOR TO DENSO PLUG ADAPTOR plug and the engine harness has Nissan Injector plugs. End to End length :
100mm (3-15/16”).
Quick and easy adapting solution when fitting injectors that have an USCAR
style plug and the engine harness has Denso injector plug.
Part No Suits
Part No Suits
AF49-1603 USCAR injector to Nissan plug adaptor
AF49-1526 USCAR to Denso

BOSCH INJECTOR TO NISSAN PLUG

USCAR INJECTOR TO HONDA PLUG ADAPTOR ADAPTOR
Quick and easy adapting solution when fitting injectors that have the USCAR Quick and easy adapting solution when fitting injectors that have a Bosch
style plug and the engine harness has Honda injector plug. plug and the engine harness has Nissan Injector plugs. End to End length :
100mm (3-15/16”).
Part No Suits
Part No Suits
AF49-1529 USCAR to Honda
AF49-1604 Bosch injector to Nissan plug adaptor

DENSO INJECTOR TO BOSCH PLUG

USCAR INJECTOR TO BOSCH PLUG
ADAPTOR
ADAPTOR Quick and easy adapting solution when fitting injectors that have a Denso
Quick and easy adapting solution when fitting injectors that have a USCAR plug and the engine harness has Bosch injector plugs. End to End length :
plug and the engine harness has Bosch Injector plugs. End to End length : 100mm (3-15/16”). Note: DENSO multi-fit plug.
100mm (3-15/16”).

Part No Suits Part No Suits

AF49-1605 Denso injector to Bosch plug adaptor
AF49-1601 USCAR injector to Bosch plug adaptor
aeroflowperformance.com 253
 ELECTRICAL ACCESSORIES

BOSCH INJECTOR
TO DENSO PLUG
ADAPTOR

DENSO INJECTOR TO NISSAN PLUG

Quick and easy adapting solution when fitting injectors that have a Bosch
plug and the engine harness has Denso plugs. End to End length : 100mm
ADAPTOR
(3-15/16”). Quick and easy adapting solution when fitting injectors that require a Denso
plug and the engine harness has Nissan injector plugs. End to End length :
100mm (3-15/16”).
Part No Suits
AF49-1606 BOSCH injector to DENSO plug adaptor Part No Suits
AF49-1610 DENSO injector to Nissan plug adaptor

USCAR INJECTOR TO DENSO PLUG

ADAPTOR
Quick and easy adapting solution when fitting injectors that require a USCAR DENSO INJECTOR TO BOSCH LOOM
Aeroflow Performance Quick and easy adapting solution when fitting injector
ELECTRICAL ACCESSORIES & GAUGES

plug and the engine harness has Denso injector plugs. End to End length :
100mm (3-15/16”). that have a DENSO plug and the engine harness has Bosch injector plug.
End to End length : 100mm (3-15/16”).
Part No Suits
Part No Suits
AF49-1607 USCAR injector to Denso plug adaptor
AF49-1611 DENSO injector to Bosch loom

USCAR INJECTOR TO TOYOTA PLUG

ADAPTOR DENSO INJECTOR TO USCAR LOOM
Quick and easy adapting solution when fitting injectors that require a USCAR
Aeroflow Performance Quick and easy adapting solution when fitting injector
plug and the engine harness has Toyota 1ZZ, 2ZZ, 1GRFE injector plugs.
that have a DENSO plug and the engine harness has USCAR injector plug.
End to End length : 100mm (3-15/16”).
End to End length : 100mm (3-15/16”).

Part No Suits Part No Suits

AF49-1608 USCAR injector to Toyota plug adaptor
AF49-1612 DENSO injector to USCAR loom

TOYOTA INJECTOR TO DENSO PLUG

ADAPTOR USCAR INJECTOR TO NISSAN LOOM
Quick and easy adapting solution when fitting injectors that require a Toyota
1ZZ or 2ZZ plug and the engine harness has Denso injector plugs. End to PLUG ADAPTOR
End length : 100mm (3-15/16”). Quick and easy adapting solution when fitting injectors that require a USCAR
plug and the engine harness has Nissan injector plugs. End to End length :
Part No Suits 100mm (3-15/16”).

AF49-1609 Toyota injector to Denso plug adaptor Part No Suits

AF49-1613 USCAR injector to NISSAN plug adaptor

254 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

EV1 INJECTOR TO HONDA LOOM

Aeroflow Performance Quick and easy adapting solution when fitting injector
that have a EV1 plug and the engine harness has Honda injector plug.
End to End length : 100mm (3-15/16”).

Part No Suits
AF49-1614 EV1 injector to Honda loom
PRESSURE SENSOR
The Aeroflow Performance pressure sensor ( transducer ) is a 150PSI ( 10
Bar ) sensor with linear voltage output. Commonly used as an oil pressure
sensor or fuel pressure sensor it also works with automotive gauges and da-
ta-loggers ( as a pressure sender / transducer sensor ) on popular aftermar-
ket brands and Ecu’ s. Can also be used for Wastegate Pressure and in CO2
INJECTOR PLUGS Systems making it a very versatile sensor. This sensor is fully calibrated for
high accuracy and designed for high stability across the temperature range. It
The Aeroflow Performance range of injector plugs are designed to be an OE includes the plug and pins to easily wire into any application ( plug / pins also
replacement plug. They high quality reproduction connectors that fit perfectly sold separately AF49-1520 )
to the original OE injector. These plugs are a great idea when re wiring the • This sensor has a 1/8” NPT thread
car for a fresh start or your injector plug over time with heat has become • The sensor body material is Brass
brittle and break apart. These OE quality plugs come in a range of different • Overall length is 44.30mm (1-47/64”)
varieties to suit many different applications. • Operating pressure range is 0 to 10 bar ( 150 psi )
• Supply voltage range is 4.65 to 5.35 volts ( working voltage is 5 volts )
• Response working time is 10 milliseconds

ELECTRICAL ACCESSORIES & GAUGES

USCAR INJECTOR PLUG & PINS
Male injector plug to suit USCAR injectors. Includes housing, pins and seals

Part No Suits
AF49-1523 USCAR plug

JETRONIC /
BOSCH
INJECTOR
PLUG & PINS Part No Suits
AF49-1551 Pressure sensor 150 psi 10 bar
This injector plug is specifically designed to suit your injectors with the
EV1 ‘Square’ style injector connectors with the top-centre key. Includes hous-
ing, pins, seals and high quality rubber boot.

Part No Suits
AF49-1524 Bosch / Jetronic minitimer
PRESSURE
SENSOR PLUG
SUMOTOMO /
DENSO PLUG &
PINS This wiring plug is specifically designed to suit TI/EURO and Honeywell Pres-
sure Sensors as well as GM throttle position sensors. Includes plug, pins and
rubber seals.
• Suits AF49-1551 pressure sensor.
Connector to suit Denso Low Guide injectors. May also suit many OE
Japanese model two pin plugs. Includes housing, pins and seals Part No Suits
AF49-1520 TI / EURO Pressure sensor plug
Part No Suits
AF49-1522 Denso multi fit plug
aeroflowperformance.com 255
 ELECTRICAL ACCESSORIES

MAP SENSOR

TEMPERATURE SENSOR
The Aeroflow Performance temperature sensor is a Negative Temperature
Coefficient (NTC) thermistor sensor. The NTC is a passive resistor, and
the resistance of an NTC varies with temperature. More specifically, as the
ambient temperature around an NTC increases, the resistance of the NTC
decreases. This sensor is fully calibrated for high accuracy and designed for
high stability across the temperature range. It includes the plug and pins to
easily wire into any application.
• This sensor has a 1/8” NPT thread
• The sensor body material is Brass The Aeroflow Performance Manifold Absolute Pressure ( MAP ) sensor is a
• Overall length is 51.70mm (2-1/32”) 4BAR (58PSI) MAP sensor. This sensor is used to determine engine load
• Depth of sensor is 22.20mm (7/8”) on forced induction engines. This sensor is intended to be used on engines
• Operating temperature range is -20 to 150oC (-20 to 302oF) producing positive manifold pressure up to 3 bar, or roughly 44psi of boost.
• Supply working voltage is 5 volts This sensor is not recommended for use with engines that will not see boost
• Response working time is 10 milliseconds above 1 bar, as it limits sensor resolution. This sensor is fully calibrated for
high accuracy and designed for high stability across the temperature range. It
includes the plug and pins to easily wire into any application.
• This sensor has a 5mm (13/64”) vacuum barb
• Overall length is 52mm (2-2/64”)
• Overall Width is 27.50mm (1-5/64”)
• Overall body height is 11.60mm (29/64”)
• Operating pressure range is 20 kpa to 400 kpa
• Supply voltage range is 4.65 to 5.35 volts ( working voltage is 5 volts )
• Response working time is 1 millisecond

Part No Suits
ELECTRICAL ACCESSORIES & GAUGES

AF49-1552 Manifold absolute pressure sensor

Part No Suits
AF49-1550 Temp Sensor 0 - 150oC (0 - 302oF)

ETHANOL CONTENT SENSOR

The Aeroflow Performance E85 / Flex Fuel ethanol content sensor measures
a vehicle’s fuel ethanol content percentage and fuel temperature, which
allows users with programmable engine management systems ( capable of
tuning for flex fuel ) the ability to optimize an engine’s tuning calibration for
fuel ethanol content. While many petrol stations label flex fuel as E85 (85%
Ethanol and 15% Gasoline), actual ethanol content can be much different.
Using this E85 Ethanol content sensor it delivers the ability to determine the
amount of fuel blend being used at any given time. This sensor is a universal
fitment with a 3/8” ( 9.52mm ) barbs on either end. It does not include the
PRESSURE SENSOR BLOCK plug and pins which are sold separately ( AF49-1521 ). We recommend the
The Aeroflow Performance pressure sensor block is a must to protect your use of our push-on Efi fittings AF808-02 which are sold separately.
transducers from harsh engine vibrations, shock loads and heat leading • Overall length is 100mm (3-15/16”)
to premature failure to the sensitive internals of the modern day pressure • Overall Width is 76mm (3”)
sensor when mounting directly to engine blocks. To prolong the life and • Overall height is 37mm (1-29/64”)
reliability remote mounting these sensitive pressure sensors is recommended
to improve service life and reliability. This block allow you to remote Part No Suits
mount up to 3 sensors with 3 x 1/8” NPT and 10 x 1/8” NPT for input line
configurations. This make it perfect to improve engine bay organization by AF49-1555 E85 fuel Flex sensor
neaten up wiring, plumbing and bringing all the sensors to one location for
easy maintenance. Compatible with all transducers that utilize 1/8 NPT male
threads and 7/8” or smaller body/hex diameter.
The kit includes:1x 3 Port Sensor Block, 3x 1/8” NPT Plugs, 2x M6 Stainless ETHANOL CONTENT
Steel Bolts, 2x M6 Stainless Steel Washers, 2x M6 Stainless Steel Nyloc
Nuts, Mounting hole spacing: 35mm
SENSOR
Total length 105mm (4-9/64”). PLUG & PINS
Total width 31mm (1-1/8”).
Height 25mm (63/64)
E85 Flex Fuel sensor plug and pins ONLY
Part No Finish
AF456-03BLK Black Part No Suits
AF456-03S Silver
AF49-1521 E85 Flex Fuel sensor plug and pins

256 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

AIR FUEL RATIO GAUGE

The Aeroflow Performance digital Air Fuel Ratio Kit has been designed for
you to provide good insurance for your engine to ensure it does not run too
lean while driving. Accurate AFR data is critical when tuning an engine. Run- O2 SENSOR EXTENSION
ning rich can cause a loss in power, while running too lean may result in seri-
ous engine damage. Using the Aeroflow Performance wideband AFR gauge This Aeroflow Performance o2 oxygen sensor extension harness is a great
with a 5-wire heated wideband LSU 4.9 sensor during the tuning process option when your current wideband O2 sensor cable is just too short for your
allows you to monitor AFR’s and adjust tuning parameters to optimize them setup. This extension will allow you to reach where it is needed without the
for maximum power and efficiency. stress of having to make an entire new harness from scratch.
Featured with this wideband is a blue LCD with a digital readout in the centre • Length is 3 meters ( 9.84 ft )
of the gauge, and a bar-graph style LED’s around the outside of the gauge • Suits LSU 4.9 wideband 02 sensor
that change from green (rich) to yellow (optimal) to red (lean) for immediate
reference to the AFR. Part No Suits

ELECTRICAL ACCESSORIES & GAUGES

• This wideband range reads from 10.0.1 to 20.0.1 AFR readings.
• Gauge to Sensor cable is 3 meters (9.84 ft) AF49-7502 Wideband oxygen sensor extension
• LSU sensor cable is 980mm (3.21ft)
• Gauge diameter is 2-1/16” ( 52mm )
• 02 Sensor bung is M18x1.5mm
• LSU 4.9 WIDEBAND SENSOR IS NOT COVERED UNDER ANY WARRANTY
Included in this kit is the gauge, LSU 4.9 5 wire heated O2 sensor, weld-in
bung, wiring harness, and instructions for installation.

Part No Suits
AF49-7500 Air fuel ratio gauge kit

BOSCH DBW THROTLE BODY PLUG

This wiring plug is specificaly designed to suit Bosch electronic throttle bodies.

Part No Suits
AF49-2135 Bosch DBW plug and pins

WIDEBAND OXYGEN SENSOR

The Aeroflow Performance 5-wire heated wideband LSU 4.9 oxygen sensor
is a must during the tuning process as it allows you to monitor AFR’s and
adjust tuning parameters to optimize them for maximum power and efficiency.
• Wire harness is 980mm (3.21ft) (from hexagonal nut to the connector)
• LSU 4.9 WIDEBAND SENSOR IS NOT COVERED UNDER ANY WARRANTY
BOSCH ACCELERATOR PEDAL PLUG
This wiring plug is specificaly designed to suit Bosch DBW accelerator pedals.

Part No Suits Part No Suits

AF49-7501 Wideband oxygen sensor ONLY AF49-2137 Bosch DBW accelerator pedal plug and pins

aeroflowperformance.com 257
 ELECTRICAL ACCESSORIES

HOBB SWITCHES SPECIFICATIONS (AF49-2010)

Pressure Set Point 1 Factory set from 4 to 7psi
Aeroflow’s hobb switches are a great way to ensure
Max Operating Pressure 150psi
safety of your engine. The 5-7 PSI (.3-.5 BAR)
Burst Pressure 750psi
(AF49-2010) can be used to cut ignition or fuel pump
Operating
when pressure drops saving you from an expensive
Temperature Range -40oC to 120oC
rebuild. Aeroflow also offer a vacuum hobbs switch
Resistive:15 AMP -6 VDC
(AF49-2011) that can turn a vacuum pump on when
8 AMP - 12 VDC
pressure drops below 17inHG in a road driven car
Electric Rating 4 AMP - 24VDC
that has a large camshaft with low vacuum to create
Inductive: 1 AMP - 120 VAC
a better pedal feel.
0.5 AMP - 240 VAC
Terminals #8 - 32 screws, 1/4” blade
Part No Description Connection 1/8” NPT Male
AF49-2010 Hobb switch (5 PSI (.3 BAR) Open) 1/8” NPT
AF49-2011 Vacuum pressure switch, closed at 17”HG. 1/8” NPT SPECIFICATIONS (AF49-2011)
Pressure Set Point 1 7”Hg vaccum (opens)
Max Operating Pressure 30”Hg vaccum
Burst Pressure 150psi
Operating
Temperature Range -40oC to 120oC
Resistive:15 AMP -6 VDC
8 AMP - 12 VDC
Electric Rating 4 AMP - 24VDC
Inductive: 1 AMP - 120 VAC
0.5 AMP - 240 VAC
Terminals #8 - 32 screws, 1/4” blade
Connection 1/8” NPT Male

AUTOMOTIVE
ELECTRICAL ACCESSORIES & GAUGES

ELECTRICAL CONNECTOR KIT

Features a spade style crimp terminal which will handle max 20 AMP.
It will accept wire size from 1.0mm to 1.5mm. Each Kit includes 10 x 1
pin connectors, 10 x 2 pin connectors, 8 x 3 pin connectors, 8 x 4 pin
connectors, 200 male/female pins and one crimp tool.

Part No Description
AF49-9550-KIT Automotive electrical connector kit

Replacement connectors
AF49-9551 1 pin connectors with male/female pins
AF49-9552 2 pin connectors with male/female pins
AF49-9553 3 pin connectors with male/female pins
AF49-9554 4 pin connectors with male/female pins

WEATHERPACK CONNECTOR KIT

Protect against dirt, water, chemicals, vibration and temperature range of
-40oC to 120oC (-40oF to 248oF). Positive lock connectors allow you to
hear the click for correctly joined connectors. Each terminal has its own
tower to eliminate shorting and each tower handles 20 amp. Each Kit
includes
6 x 1 pin connectors, 4 x 2 pin connectors, 4 x 3 pin connectors, 2 x 4 pin
connectors, 2 x 6 pin connectors, 100 male/female pins, 80 wire seals, 20
cavity plugs and one crimp tool.

Part No Description
AF49-8500-KIT Weatherpack connector kit
Replacement connectors
AF49-8501 1 pin connectors with male/female pins & seals
AF49-8502 2 pin connectors with male/female pins & seals
AF49-8503 3 pin connectors with male/female pins & seals
AF49-8504 4 pin connectors with male/female pins & seals
AF49-8506 6 pin connectors with male/female pins & seals
AF49-8520 Female pins (Pack of 10)
AF49-8521 Male pins (Pack of 10)
AF49-8523 Cavity plugs (Pack of 10)
AF49-8531 1 pin connector seal (Pack of 10)
AF49-8532 2 pin connector seal (Pack of 10)
AF49-8533 3 pin connector seal (Pack of 10)
AF49-8534 4 pin connector seal (Pack of 10)
AF49-8536 6 pin connector seal (Pack of 10)
AF49-8540 Grey wire seals (Pack of 10)
AF49-8541 Green wire seals (Pack of 10)
AF49-8550 Weatherpack crimp tool
AF49-8551 Pin removal tool

258 aeroflowperformance.com
 ELECTRICAL ACCESSORIES

WEATHERTIGHT CONNECTOR KIT

Sealed safe, reliable and versatile automotive electrical Deutsch DT

style connectors. Each connector contains a secondary wedge lock
for maximum contract retention. Each pin accepts 14 AWG wire size
and 13 amp rating.
Each Kit includes: 4 x 2 pin connectors, 4 x 3 pin connectors, 4 x 4
pin connectors, 4 x 6 pin connectors, 2 x 8 pin connectors, 2x 12 pin
connectors, 200 male/female pins, 25 cavity plugs and one crimp tool.

Part No Description
AF49-9000-KIT Weathertight connector kit
Replacement connectors
AF49-9002 2 pin connectors with male/female pins, locks & seals
AF49-9004 4 pin connectors with male/female pins locks & seals
AF49-9006 6 pin connectors with male/female pins locks & seals
AF49-9008 8 pin connectors with male/female pins locks & seals
AF49-9012 12 pin connectors with male/female pins locks & seals
AF49-9020 Female pins (Pack of 10)
AF49-9021 Male pins (Pack of 10)
AF49-9022 Cavity plugs (Pack of 10)
AF49-9030 2 pin connector Seals (Pack of 5)
AF49-9031 4 pin connector seal (Pack of 5)
AF49-9032 6 pin connector seal (Pack of 5)
AF49-9033 8 pin connector seal (Pack of 5)
AF49-9034 12 pin connector seal (Pack of 5)
AF49-9040 2 pin wire seals (Pack of 5)
AF49-9041 4 pin wire seals (Pack of 5)
AF49-9042 6 pin wire seals (Pack of 5)

ELECTRICAL ACCESSORIES & GAUGES

AF49-9043 8 pin wire seals (Pack of 5)
AF49-9044 12 pin wire seals (Pack of 5)
AF49-9050 Weathertight crimp tool
AF49-9051 Pin removal tool

ELECTRIC POWER WINDOW KIT

Aeroflow Performance universal electric power window kit is a great option
for any custom car that has a sliding flat side glass window. Due to the
high-torque motors and custom mounting brackets, this power window kit is
great for older cars that have never had power windows and installation is
simple. Each kit comes with high- torque worm-gear driven motors, reinforced
guide tracks and adjustable window bases, all of which assure smooth
window operation that is quiet and long lasting. This kit is designed to suit 2
door cars with a flat glass that goes straight up and down and are between
152.4mm ( 6” ) to 609.6mm ( 24” ). It is recommended to use a 40 amp
relay kit ( sold separately AF49-1038 ) to power this universal electric power
window kit.
S/S NUMBER PLATE BOLTS WITH LIGHT

Part No Suits Part No Description

AF49-1600 Flat glass universal electric power window kit AF49-2005 Number plate bolts with built in lights. 5/16 UNC thread.

aeroflowperformance.com 259
 ELECTRICAL ACCESSORIES

GEN 2 LIQUID FILLED

GEN 2 PRESSURE GAUGES 38mm (1-1/2”)
PRESSURE GAUGES 38mm (1-1/2”)
Part No Description Part No Description
AF30-2200 1 Bar (15 PSI) (black face, white pointer) AF30-2204 1 Bar (15 PSI) (black face, white pointer)
AF30-2208 2 Bar (30 PSI) (black face, white pointer) AF30-2210 2 Bar (30 PSI) (black face, white pointer)
AF30-2201 7 Bar (100 PSI) (black face, white pointer) AF30-2205 7 Bar (100 PSI) (black face, white pointer)
AF30-2202 1 Bar (15 PSI) (white face, black pointer) AF30-2206 1 Bar (15 PSI) (white face, black pointer)
AF30-2209 2 Bar (30 PSI) (white face, black pointer) AF30-2211 2 Bar (30 PSI) (white face, black pointer)
AF30-2203 7 Bar (100 PSI) (white face, black pointer) AF30-2207 7 Bar (100 PSI) (white face, black pointer)
Note: All 1/8” NPT male thread. Note: All 1/8” NPT male thread.
ELECTRICAL ACCESSORIES & GAUGES

MAINTAINING LIQUID FILLED

GAUGES
Over time liquid filled gauges can build up pressure that may throw off
their calibration. It is recommended that every change of season you
place the gauge face down and uncap/recap the rubber grommet to
release any pressure build up and equalize pressure.
This will ensure the gauge reads correctly.

CORRECT WAY TO FIT GAUGES

When installing pressure gauges always screw the fitting in via the
brass fitting DO NOT tighten by holding the gauge body, this will
cause the gauge to twist off the brass fitting and damage the gauge
mechanism. Start the fitting by hand and then use the correct spanner
to tighten using the hex on the brass fitting as shown.

Note: Line is
250 series nylon
braided hose.

S/S BRAIDED LINE GAUGE KITS BLACK BRAIDED LINE GAUGE KITS
AN .9m 3 ft 1.2m 4 ft 1.8m 6 ft AN .9m 3 ft 1.2m 4 ft 1.8m 6 ft
-3 AF30-3003 AF30-3004 AF30-3006 -3 AF30-3003BLK AF30-3004BLK AF30-3006BLK
-4 AF30-4003 AF30-4004 AF30-4006 -4 AF30-4003BLK AF30-4004BLK AF30-4006BLK

260 aeroflowperformance.com 207

 ELECTRICAL ACCESSORIES

GM LS CHEVY OIL PRESSURE ADAPTER

NYLON TUBING KIT 3.6M / 12ft Aeroflows GM LS series oil pressure gauge adapter has been designed to
allow the use of the standard oil pressure switch which is needed for the
3.17mm (1/8”) Diameter includes fittings & ferrules, only for mechanical standard computer and an auxiliary port for use with an aftermarket 1/8”
pressure gauges up to 13.8 BAR (200psi). Not recommended for fuel NPT sender. With the swivel banjo design this adaptor will suit all models
pressure. with the M16x1.5 thread

Part No Description Port Blue Black Silver

AF30-3000 Clear line and silver fittings 1/8” NPT AF166-05-02 AF166-05-02BLK AF166-05-02S
AF30-3000BLK Black line and black fittings
AF30-3050 Replacement Olives (5 Pack) GM LS oil pressure adapter also available in steel: AF166-05-02-ST

AFGA-38

ELECTRICAL ACCESSORIES & GAUGES

AF661-10BLK

TEMPERATURE PROBE ADAPTERS

Adapts mechanical temperature (5/8” -18 UNF) probe to NPT holes.

OIL PRESSURE GAUGE ADAPTER Thread Blue Black Silver

Aeroflow’s oil pressure and gauge adapters allow you to add an electric 3/8” NPT AF660-06 AF660-06BLK AF660-06S
oil pressure gauge while still retaining the stock warning light or gauge. The 1/2” NPT AF660-08 AF660-08BLK AF660-08S
adapters are 63.5mm 2-1/2” long and fit in-line between the engine and the -10ORB AF661-10 AF661-10BLK AF661-10S
stock oil pressure switch and have a 1/8”-27 NPT port on the side to suit all
types of aftermarket applications such as Prolite, Turbo etc.

Part No Description AF59-6001

AFGA-31 Oil Pressure Gauge Adapter 1/8” NPT

AFGA-32 Oil Pressure Gauge Adapter 1/4” NPT
AFGA-33 Oil Pressure Gauge Adapter 1/8” BSPP
AFGA-34 Oil Pressure Gauge Adapter M10 x 1.0
AFGA-35 Oil Pressure Gauge Adapter M14 x 1.5
AFGA-36 Oil Pressure Gauge Adapter M16 x 1.5
AFGA-37 Oil Pressure Gauge Adapter M18 x 1.5
AFGA-38 Adapter 1/4” NPT for Ford 289, 302 and 351 windsor

AF59-6010

FAN ACTIVATION SWITCH

Aeroflow Performance thermal temperature switch is designed to allow your
electric fan to turn on and turn off at the present temperature of 79.5oC
LS CHEVY OIL PRESSURE ADAPTER (175oF). This bi-metal temperature switch has a 1/8” NPT universal thread to
The Aeroflow Performance LS series oil pressure gauge adapter is now fit multiple applications. Perfect for use with the inline barb adapters with 1/8”
available in a steel option to provide extra strength from engine vibration. port, available in a range of sizes from 32mm (1-1/4”) to 38mm (1-1/2”).
This adapter allows the use of a standard oil pressure switch which is needed
for standard computer and an auxiliary port for use with an aftermarket 1/8” Part No Description
NPT sender. With the swivel banjo design this adapter will suit all models with
an M16 x 1.5mm thread. AF59-6010 Fan activation switch
AF59-6001 Plug wire loom
Part No Description

AF166-05-02-ST LS Chevy oil pressure adapter

aeroflowperformance.com 261
 ELECTRIC FANS & ACCESSORIES

Mount Dia
measuring
points

UNIVERSAL DUAL FAN RELAY

Aeroflow’s Performance dual fan relay and wiring harness kit is essential
with an twin electric fan setup. This universal kit will prevent voltage drops
and amperage overloads which can cause havoc to your electrical system.
It includes 2 x automotive 12 volt 40 amp relays, 2 x 30 amp circuit breaker,
3/8 NPT thermostat probe turn fan on at 85oC (185oF) and switches it off
at 76oC (169oF), all crimp fittings and a prewired relay blocks for ease of
installation.

Part No Description
AF49-1048 Dual fan relay

ELECTRIC
FANS AND
ACCESSORIES
All Aeroflow electric fans come
with fitting kit. Draws 10A at 13V
All fans are curved reversible blade for push or pull applications.
NOTE: Factory setup to puller applications.
ELECTRICAL ACCESSORIES & GAUGES

Part No Description Mount Dia

AF49-1017 178mm (7”) 550 CFM 215mm (8-16/32” )
UNIVERSAL SINGLE FAN RELAY AF49-1000 254mm (10”) 850 CFM 285mm (11-13/64”)
AF49-1001 305mm (12”) 1400 CFM 310mm12-13/64”)
Aeroflow’s Performance single fan relay and wiring harness kit is essential AF49-1002 356mm (14”) 1650 CFM 365mm (14-3/8”)
with an electric fan setup. This universal kit will prevent voltage drops and AF49-1003 406mm (16”) 2000 CFM 415mm (16-21/64”)
amperage overloads which can cause havoc to your electrical system. It AF49-1004 Fan Mount Feet Short
includes 1 x automotive 12 volt 40 amp relay, 1 x 30 amp circuit breaker, AF49-1007 Quick Fit Nylon Mounting Kit
3/8 NPT thermostat probe turn fan on at 85oC (185oF) and switches it off with protective foam pads for easy tool-free installation.
at 76oC (169oF), all crimp fittings and a prewired relay blocks for ease of
installation.
NOTE: - Relay to be used with 30 amp fuse (Fuse not supplied).

Part No Description
AF49-1006 Single fan relay

AF49-1004

AF49-1007

Mount Dia
measuring points

CHROME
ELECTRIC HEAVY DUTY FAN MOUNTING KIT
FANS Aeroflow Performance heavy duty fan mount kit is designed as a universal
All Aeroflow electric fans come with fitting kit. Draws 10A at 13V mounting kit which can be used for large fans which have the added weight
All fans are curved reversible blade for push or pull applications. that is required to support and hold them in place. It includes 4 x hex bolts,
NOTE: Factory setup to puller applications. 4 x nyloc nuts , 4 x fibre red washers and 4 x flat stainless steel washers.
UHL 74.5mm (2-15/16”), Shank length 26mm (1-1/64”), washer O.D. 31mm
Part No Description Mount Dia (1-7/32”),
AF49-1027 356mm (14” ) 1650 CFM 365mm (14-3/8”)
AF49-1028 406mm (16”) 2000 CFM 415mm (16-21/64”)
Part No Description
AF49-1049 Heavy duty fan mount kit
NOTE: - Relay to be used with 30 amp fuse (Fuse not supplied).

262 aeroflowperformance.com
 COOLING ACCESSORIES

ELECTRIC FAN
CONTROLLER
Adjustable electric fan temperature controller also allows you to monitor
voltage, oil and water temperatures. Digital LED display.Include 1/8NPT sensor.
Note: Can be used as a standalone volts / oil / water gauge.

Part No Description
AF49-1029 Adjustable electric fan controller
AF59-1029 Replacement probe sensor.

UNIVERSAL ELECTRIC WATER PUMP

The Aeroflow Performance compact brushless electric water pump is designed for universal fitment to compliment or replace a vehicle’s existing mechanical
belt-driven water pump. This brushless design is a magnetically driven water pump which allows high flow of up to 46.6 Litres Per Minute with the larger 1 inch
(25.4mm ) barb and 40 Litre Per Minute on the smaller 3/4 inch ( 19.05mm ) barb. Being a brushless design it has no brushes to ever wear out and the pump is
magnetically driven by the motor, which means that no shaft sealing is required.
Dimensions:
Overall height: 96mm (3-1/32”). Overall length: 123mm (4-3/32”).
Pump diameter: 60mm (2-1/32”). Mounting bolt centres: 76mm (3”) Part No Description

DO NOT RUN DRY. AF49-1051

AF49-1052
Electric water pump 3/4 inch ( 19.05mm ) barb
Electric water pump 1 inch (25.4mm ) barb
WARNING: WARRANTY WILL BE VOID IF THE

COOLING, INSULATION & AIR CONDITIONING

PUMP IS RUN WITHOUT FLUID.

Part Number AF49-1051

Part Number AF49-1052
Voltage DC 12V
Voltage DC 12V
Voltage Range DC 10V~16V
Voltage Range DC 10V~16V
Withstanding Voltage 20V
Withstanding Voltage 20V
Current 5.6 A ± 10%
Current 5.6 A ± 10%
Max. Power 67.2 W 108 W
Max. Power 67.2 W 108 W
Flow Rate 2500 LPH
Flow Rate 2800 LPH
Pressure 8M
Pressure 7M
Inlet Diameter 22 mm (55/64”)
Inlet Diameter 27 mm (1-1/16”)
Outlet Diameter 22 mm (55/64”)
Outlet Diameter 27 mm (1-1/16”)
Water Temperature -10 ~ 105 ℃ (-10 ~ 221oF)
Water Temperature -10 ~ 105 ℃ (-10 ~ 221oF)
Ambient Temperature - 10 ~ 85 ℃ (-10 ~ 185oF)
Ambient Temperature - 10 ~ 85 ℃ (-10 ~ 185oF)
Storage Temperature - 10 ~ 85 ℃ (-10 ~ 185oF)
Storage Temperature - 10 ~ 85 ℃ (-10 ~ 185oF)
Dimensions 122.0 x 94.0 x 96.3 mm
Dimensions 124.0 x 94.0 x 96.2 mm
Pump Body Material PA66 + 30% GF / Aluminum
Pump Body Material PA66 + 30% GF / Aluminum
Noise Level < 40 dB
Noise Level < 40 dB
Controller Built-in
Controller Built-in
Weight about 800g
Weight about 800g

aeroflowperformance.com 263
 COOLING ACCESSORIES

AF50-1000
AF50-1010

AF50-1001 AF50-1011

ADJUSTABLE COOLANT
GM LSA SUPERCHARGER WATER CROSS-OVER LOG
FITTING ADAPTERS The Aeroflow Performance LS cross over logs are designed to work in
For those wanting to add a touch of class and remove those factory OEM conjunction with our GM LS water pump plates ( sold separately AF64-
steel lines on the supercharger and replace them with some braided line/AN 2241 ). It simplifies the plumbing of a remote mounted electric water
options. Aeroflow Performance have designed these simple clip on fittings pump by eliminating all the extra adapters and lines. This adjustable
that attach straight to the supercharger and allows you to convert straight to length design which allows the log to be adjusted from 172mm ( 6.8” ) to
-10AN or a 5/8 ( 15.9mm ) barb. 266mm ( 10.5” ) makes it a very universal design that can be used with
any engine utilizing block adapters. The coolant cross over log features 2
Part No Description female -12AN swivels with 1 male -16AN flare. CNC machined from billet
aluminium construction with black anodized finish only.
AF50-1000 Female LSA Water fitting adapters with 5/8 barb SOLD INDIVIDUALLY.
AF50-1001 Male LSA Water fitting adapters with 5/8 barb
AF50-1010 Female LSA Water fitting adapters with -10AN
COOLING, INSULATION & AIR CONDITIONING

AF50-1011 Male LSA Water fitting adapters with -10AN

Part No Description
AF64-2242 Coolant cross over log

GM LSA AF64-2187

SUPERCHARGER
AF64-2187BLK

WATER
FILLER TEE
The water filler tee is a unique AF64-2188
billet piece that replaces the factory
plastic item which is brittle and can
fatigue over time. The added advantage being you cannot purchase the OEM
item separately and instead have to purchase the entire line kit which is a
costly expense.

Part No Description
AF50-1002 Black LSA Water filler tee AF64-2188 AF64-2186BLK

AF64-2186

GM LS SERIES CROSS-OVER ADAPTERS

Aeroflow Performance LS water cross over adapters are specifically designed
for the LS series engine, these cross over adapters compliment aftermarket
intakes and accessories that the factory rigid brazed hard lines will not. The
lines are designed to eliminate trapped air and steam from your engine to
prevent hot spots and overheating. The adapter O-ring seals and converts
to -4 AN plumbing. Featuring fixed or swivel style adapters in dual or single
variations allow optimal routing on your application which eliminates the need
for T adapters. Available in both silver and black anodised options. Installing
LS SERIES WATER PUMP PLATES these water cross-over adapters in all 4 corners of the engine have been
The Aeroflow Performance GM LS water pump adapter plates are designed proven to decrease detonation in number 7 & 8 cylinders especially and are a
for cooling systems that employ a remote or radiator mounted water pump. great improvement over the standard steam vent plumbing.
These adapters are the cleanest and simplest way to connect the coolant
lines to the engine. These plates are designed to help you connect AN hoses
to your engine block at the spots where the water pump usually bolts on. Part No Finish Description
Featuring 4 x -10ORB ports and manufactured from billet aluminium. AF64-2186 Silver LS cross-over adapters
AF64-2186BLK Black LS cross-over adapters
Part No Description AF64-2187 Silver Swivel LS cross-over adapters
AF64-2187BLK Black Swivel LS cross-over adapters
AF64-2241 LS Series water pump plates AF64-2188 Silver Dual Swivel LS cross-over adapters
AF64-2188BLK Black Dual Swivel LS cross-over adapters
264 aeroflowperformance.com
 COOLING ACCESSORIES

LS WATER CROSS OVER KIT

The Aeroflow Performance GM LS water cross-over kit provides a clean,
professional look while providing proper air bleeding for the cooling system •Fan can be
and can be used with Carb or EFI intakes without modifications. This controlled by ECU
Stainless Steel Steam Vent System connects the 4 corners of your LS or temp switch.
engine to remove trapped steam and get it where it needs to go. When
steam gets trapped pressures rise, when pressures rise it creates an unsafe • Includes temp
switch, fuse and

COOLING, INSULATION & AIR CONDITIONING

tune condition which can lead to pre-detonation, head gasket failures,
lean cylinders causing engine failure. This setup combines our compact wiring harness
distribution block and swivel cross over adapters with 1/4” 304 stainless steel
line. Requires only 20mm (25/32”) of intake manifold clearance. GM LSA HEAT EXCHANGER
Aeroflow have designed a larger capacity heat exchanger that is a bolt-on
Part No Description replacement for the VE-VF chassis running the LSA supercharged engine.
This kit is a direct bolt-on and includes everything needed for installation.
AF64-2197 GM LS water cross over kit. The larger enhanced core design technology has better air flow for a cooler
intake temperature, equalling increased horsepower. The heat exchanger
is all aluminium for a lightweight advantage and is 100% tig welded and
is coated black. For best results use with Aeroflow’s increased capacity
reservoir and higher flowing brushless electric water pump AF49-1051 or
AF49-1052.
Overall width 594mm (23-15/64”). Height 470mm (18-1/2 “).
Thickness 112mm (4-13/32”).

Part No Description
AF77-2047 GM LSA heat exchanger

UNIVERSAL HEAT EXCHANGER

The Aeroflow Performance universal heat exchanger is a dual pass/single
row design which allows the coolant to flow across the core of the heat
exchanger two times before exiting the radiator for lowest outlet temperature RADIATOR HOSE GAUGE ADAPTERS
possible. In a liquid-to-air intercooler system or a supercharger setup, the air
is cooled by a liquid, typically water. These systems require a supplemental Aeroflow’s Billet Hose Adapters with 1/8” NPT Auxiliary Port are perfect
heat exchanger to cool the liquid running through the intercooler. for mounting gauge senders to monitor radiator temperatures. These are
It is recommended this type of heat exchanger is front mounted and/or ac- perfect to slip between radiator hoses and enable you to mount a sender
cessible to fresh-air-flow for optimal performance. effortlessly.
• Overall Dimensions (Tank end / Tank end) 599mm (23-37/64”)
• Length x 176mm (6-59/64”)
• Height x 67mm (2-5/8”) Part No Colour Description
• Core Width 56mm (2-13/64”) AF64-2232 Black 32mm (1-1/4”) OD adapter with 1/8” port
• 4 x M8 x 1.25mm mounting points AF64-2234 Black 34mm (1-11/32”) OD adapter with 1/8” port
• 2 x -12ORB female inlet/outlet ports AF64-2236 Black 36mm (1-27/64” ) OD adapter with 1/8” port
• Bleed port on top of end tank (1/8”NPT). AF64-2238 Black 38mm (1-1/2”) OD adapter with 1/8” port

Part No Description
AF77-2048 Universal heat exchanger

aeroflowperformance.com 265
 COOLING ACCESSORIES

RESTRICTOR PLATE KIT

Restricting coolant flow leaving the engine lets you control the amount of heat
absorbed by the coolant. Red, gold and blue anodised aluminium restrictor
plates are mounted under the water outlet on the intake manifold. This kit
consists of three restrictor plates with 15.88mm (5/8”), 19.08mm (3/4”) and
25.4mm (1”) I.D. holes for optimum coolant flow, 28.57mm (2-1/8”) O.D.
Suitable for Gm Holden, Chevrolet and Ford

Part No Description
INLINE THERMOSTAT
AF49-1055 Coolant restrictor plate kit
The Aeroflow Performance inline thermostat housing
allows you to remote mount a thermostat inline in
between the top radiator hose from your cooling system
away from the engine. This is useful for cars that have no room to allow
the thermostat to be on the engine block. This inline thermostat accepts a
1.5” ( 38mm ) radiator hose and takes a standard Chevy thermostat ( sold
Separately ). Machined from billet aluminium and available in polished or
black anodised finishes.
Length 3.93” ( 100mm )
COOLING, INSULATION & AIR CONDITIONING

Diameter 3.14” ( 80mm )

Part No Finish Description

AF64-3044 Silver Inline universal thermostat
WATER NECK SPACER AF64-3044BLK Black Inline universal thermostat

Aeroflow’s Chev water neck spacer kit is the perfect solution for allowing
an extra auxiliary port of coolant, can be used for many applications in-
cluding plumbing coolant to a turbo charger, extra coolant flow from rear of
heads or simply connecting your heater in a conversion! Available in silver
or black anodised finishes. 28mm (1-7/64”) high

Part No Colour Description

AF64-4051 Silver Spacer with 2 x -8ORB female ports
AF64-4051BLK Black Spacer with 2 x -8ORB female ports

BILLET
RADIATOR
FILTER/FILLER
REMOTE THERMOSTAT HOUSING This awesome looking billet radiator filter is designed to
be fitted to the top radiator hose to filter and remove any
The Aeroflow Performance remote thermostat housing allows you to particles before they reach the radiator and lead to clogging. The billet
remote mount a thermostat in the cooling system away from the engine radiator filter is also simple to clean and install. Simply unscrew the cap
itself. This is useful for cars that have no room to allow the thermostat to and remove the filter screen and sludge collector, clean and reassemble.
be on the engine itself such as a blower manifold. This remote thermostat The filter inlet and outlet come in 38mm (1-1/2”) diameter with -16 ORB
housing also allows you to locate the filler neck at the highest point of car female thread inside. Suits AF150-28 hose finishers. (Fittings are not
with low mount radiators to help bleed air out of the system. It is designed included).
to adapt a Chevy thermostat housing along with a Chevy thermostat. Overall length 95mm (3-3/4”)
Made from billet aluminium with two female -12 ORB ports on both sides Height 75mm (2-31/32”)
and 3/8 UNC mounting holes. Comes in two colour options black & silver. Width 63mm (2-31/64”)

Part No Description
Part No Colour Description
AF64-2043 Black Inline billet radiator filter
AF64-3043S Silver Remote themostat housing AF64-2043P Polished Inline billet radiator filter
AF64-3043BLK Black Remote themostat housing AF59-2043 Replacement O-Ring and Screen
AF926-22-16BLK -16ORB to 1-3/8” barb for push-on hose

266 aeroflowperformance.com
 COOLING ACCESSORIES

SUITS SB FORD WINDSOR

(NON Swivel) with internal -16ORB
Part No Finish
AF64-2033 Blue
AF64-2033BLK Black
AF64-2033S Silver
AF64-2033R Red
AF64-2033C Chrome
AF59-2033 Replacement O-Ring & Bolts AF64-2033R
HI-FLOW THERMOSTATS
High flow design that resists large variations of coolant pressure at high rpm.
Fully opens at correct temperature consistently regardless of engine rpm.
Perfect for high performance street, drag race, and oval track SUITS BB FORD 429 - 460 (Swivel)
Copper & brass construction - resists corrosion
Suitable for GM Holden, Chevrolet, Ford and AMC Part No Finish
AF64-4037 Blue
Part No Description AF64-4037BLK Black
AF64-4037S Silver
AF49-1043 71oC (160oF) hi-flow thermostat AF64-4037R Red
AF49-1044 82oC (180oF) hi-flow thermostat AF64-4037C Chrome
AF59-4037 Replacement O-Ring & Bolts AF64-4037BLK

SUITS 308 HOLDEN (GM Australia)

BILLET THERMOSTAT HOUSINGS Part No
(Swivel) (Heater optional)
Supplied with bolts and O-ring where applicable.

COOLING, INSULATION & AIR CONDITIONING

Finish
SUITS SBC / BB CHEVY (Swivel) AF64-2091 Blue
AF64-2091BLK Black
Part No Finish AF64-2091S Silver
AF64-2034 Blue AF64-2091R Red
AF64-2034BLK Black AF64-2091C Chrome
AF64-2034S Silver AF59-2091 Replacement O-Ring & Bolts AF64-2091C
AF64-2034R Red
AF64-2034C Chrome
AF59-2034 Replacement O-Ring & Bolts
AF64-2034BLK SUITS 308 HOLDEN (GM Australia)
(Swivel) (No heater)
SUITS 302 - 351 CLEVELAND (NON Swivel) Part No Finish
features an internal -16 ORB AF64-2056 Blue
AF64-2056BLK Black
AF64-2056S Silver
Part No Finish AF64-2056R Red
AF64-2021 Blue AF64-2056C Chrome
AF64-2021BLK Black AF59-2091 Replacement O-Ring & Bolts
AF64-2021S Silver Note:AF64-2034 can be used on VN EFI manifolds AF64-2056BLK
with no heater provision. Some manifolds will require
AF64-2021R Red metric bolts.
AF64-2021C Chrome
AF64-2021BLK
AF59-2021 Replacement O-Ring & Bolts

SUITS GM LS1 / LS2 (Swivel)

SUITS 302 - 351 Cleveland (90°) Part No Finish
(Swivel) AF64-2092 Blue
AF64-2092BLK Black
Part No Finish AF64-2092S Silver
AF64-2039 Blue AF64-2092R Red
AF64-2039BLK Black AF64-2092C Chrome
AF64-2039S Silver AF59-2092 Replacement O-Ring & Bolts
AF64-2039R Red Note: Housing is designed to suit LS2 thermostat AF64-2092C
AF64-2039C Chrome
AF64-2039
AF59-2039 Replacement O-Ring & Bolts Red Chrome

SUITS GM LS3 (Swivel)

SUITS FORD FALCON 6 CYL
(EF EL BA BF FG) (Swivel) Part No Finish
AF64-2115 Blue
Part No Finish AF64-2115BLK Black
AF64-2115S Silver
AF64-4036 Blue
AF64-2115R Red
AF64-4036BLK Black
AF64-2115C Chrome
AF64-4036S Silver
AF64-4036R Red AF59-2092 Replacement O-Ring & Bolts
Note: Housing is designed to suit LS2 thermostat
AF64-4036C Chrome
AF64-2115BLK
AF59-4036 Replacement O-Ring & Bolts
AF64-4036C
aeroflowperformance.com 267
 COOLING ACCESSORIES

SUITS NISSAN RB (NON Swivel)

Note: DOES NOT FIT RB26

Part No Finish
AF64-4029 Blue
AF64-4029BLK Black
AF64-4029S Silver
AF64-4029R Red
AF64-4029C Chrome
AF64-4029R

SUITS NISSAN RB30 TOP WATER RADIATOR HOSE ADAPTERS

HOUSING (NON Swivel)
Fit most popular electric water pumps and Aeroflow water necks.
Part No 1-1/4”-20 thread.
Finish
AF64-4030 Blue Length Blue Black Silver Red
AF64-4030BLK Black
AF64-4030S Silver Suits 38.1mm (1-1/2”) Radiator Hose
AF64-4030R Red 69.8mm 2-3/4” AF64-2080 AF64-2080BLK AF64-2080S AF64-2080R
AF64-4030C Chrome AF64-4030 114.3mm 4-1/2” AF64-2081 AF64-2081BLK AF64-2081S AF64-2081R
Suits 44.5mm (1-3/4”) Radiator Hose
69.8mm 2-3/4” AF64-2082 AF64-2082BLK AF64-2082S AF64-2082R
114.3mm 4-1/2” AF64-2083 AF64-2083BLK AF64-2083S AF64-2083R
SUITS MAZDA ROTARY 2 Bolt (Swivel)
Part No slight modification to bolt holes)
(requires

Part No Finish
AF64-2039 Blue
COOLING, INSULATION & AIR CONDITIONING

AF64-2039BLK Black
AF64-2039S Silver
AF64-2039R Red
AF64-2039C Chrome
AF59-2039 Replacement O-Ring & Bolts

RADIATOR HOSE FILLER

Machined from 6061-T6 billet aluminium, Aeroflow radiator hose fillers are
designed to be used in the top radiator hose to provide a complete coolant
system fill. Machined with 2 x 1/8” NPT ports for water temp or pressure
gauges. Available in polished or polished black anodised and made to
ZINC ANODE PLUG suit 38mm (1-1/2”) size radiator hose and accept the Aeroflow large style
radiator cap ( AF64-5042 ) sold separately.
Sacrificial zinc anode insert to control electrolysis in cooling systems. Overall length 118mm (4-41/64”), Height 76mm (2-63/64”)
8mm (5/16”) barb fitting included.
Part No Description
Part No Colour Description
AF49-2500 1/4” NPT plug with zinc anode
AF64-4040 Polished. Suits 38mm(1-1/2” )hose & 42mm rad cap
AF64-4040BLK Black. Suits 38mm(1-1/2” )hose & 42mm rad cap

Note: Aeroflow radiator caps are available in 6 colours!

Blue, Black, Gold, Polished, Purple and Silver!

BILLET RADIATOR CAP COVER

This awesome looking billet radiator cap covers your standard cap

AN WATER NECK ADAPTERS for a clean show car finish. Comes in two sizes to suit either large or small
standard caps. Large range of colours. (Requires modification of standard
Suits 360o Swivel Aeroflow water necks cap and adhesive).
Allows the use of AN hose and fittings for radiator hose applications.
Colour Small Cap Large Cap
Remove barbed fitting and screw in one of these AN adapters. -16 Adapter is
52mm (2-3/16”) from O-ring to AN, -20 adapter is 54mm (2-1/8”) from O-ring to Raw AF463-0032 AF463-0042
AN. Polished AF463-0032P AF463-0042P
Blue AF463-0032B AF463-0042B
AN Blue Black Silver Red Chrome Silver AF463-0032S AF463-0042S
Black AF463-0032BLK AF463-0042BLK
-16 AF64-2073 AF64-2073BLK AF64-2073S AF64-2073R AF64-2073C
Gold AF463-0032G AF463-0042G
-20 AF64-2074 AF64-2074BLK AF64-2074S AF64-2074R AF64-2074C
Purple AF463-0032PUR AF463-0042PUR
Red AF463-0032R AF463-0042R
268 aeroflowperformance.com
 INSULATION & ACCESSORIES

Part No Colour Description

To Suit 32mm Water neck 16 PSI
AF64-5032 Blue Small Cap with Blue Anodised Cover
AF64-5032BLK Black Small Cap with Black Anodised Cover
AF64-5032G Gold Small Cap with Gold Anodised Cover
AF64-5032P Polished Small Cap with Polished Cover
AF64-5032PUR Purple Small Cap with Purple Anodised Cover
AF64-5032R Red Small Cap with Red Anodised Cover
AF64-5032S Silver Small Cap with Silver Anodised Cover

To Suit 32mm Water neck 21 PSI

AF64-5033 Blue Small Cap with Blue Anodised Cover
AF64-5033BLK Black Small Cap with Black Anodised Cover
AF64-5033G Gold Small Cap with Gold Anodised Cover
AF64-5033P Polished Small Cap with Polished Cover
RADIATOR CAPS AF64-5033PUR Purple
AF64-5033R Red
Small Cap with Purple Anodised Cover
Small Cap with Red Anodised Cover
These Aeroflow radiator caps are precision-machined and made from AF64-5033S Silver Small Cap with Silver Anodised Cover
6061-T6 aluminium. Come in two sizes either large or small standard
caps. Large range of colours. To Suit 42mm Water neck 7 PSI
Small cap 32mm (1-1/4”) 16 PSI (1.1 bar) (110kPa) AF64-5042 Blue Large Cap with Blue Anodised Cover
Small cap 32mm (1-1/4”) 21 PSI (1.44 bar) (145kPa) AF64-5042BLK Black Large Cap with Black Anodised Cover
Large cap 42mm (1-5/8) 7 PSI (0.5 bar) (48kPa) AF64-5042G Gold Large Cap with Gold Anodised Cover
AF64-5042P Polished Large Cap with Polished Cover
AF64-5042PUR Purple Large Cap with Purple Anodised Cover
AF64-5042R Red Large Cap with Red Anodised Cover
AF64-5042S Silver Large Cap with Silver Anodised Cover

COOLING, INSULATION & AIR CONDITIONING

TURBO BAGS / BLANKETS
The Aeroflow Performance turbo bag / blanket range provides high
quality material selection, design, and construction, whilst at an
affordable price. The turbo bag isolates the heat produced by your
turbocharger. This will prevent that heat from damaging components
surrounding the turbocharger within your engine compartment such as
wiring, hoses and plastics. When the heat is isolated in the turbocharger
it improves turbocharger efficiency by keeping the exhaust gases hot.
Resulting in faster spool up of the turbocharger and thus less turbo lag AF91-8006
and a more linear power curve.
Available in three different options black , titanium and carbon
Universal replacement turbo bag
TITANIUM SERIES
springs available AF59-2100 High temp titanium material
rated to 1370oC/2500oF internal & AF91-8002
1370oC/2500oF external

Part No Description - To Suit

AF91-8006 Suit GT25/GT28 Internal gate (T28)
AF91-8002 Suit GT30-35/GT40 External gate (T3)
STANDARD SERIES AF91-8004 Suit T04 & GT42 External gate (T4)
AF91-8005 Suit GT45/GT47 External gate (T6)
High temp silica material rated to
1370oC/2500oF internal &
600oC /1100oF external

Part No Description - To Suit

BLACK SERIES
AF91-1006 Suit GT25/GT28 Internal gate (T28)
AF91-1002 Suit GT30-35/GT40 External gate (T3) AF91-8010
AF91-1004 Suit T04 & GT42 External gate (T4)
AF91-1005 Suit GT45/GT47 External gate (T6)
DIRECT FIT TURBO BAGS
Part No Description - To Suit
STANDARD SERIES
AF91-1000 Ford XR6 BA/BF/FG or GT30/GT35 with internal gate
AF91-1001 Subaru with VF turbocharger internal gate

CARBON SERIES TITANIUM SERIES

AF91-8000 Ford XR6 BA/BF/FG or GT30/GT35 with internal gate
High Temp Carbon material Rated
AF91-8010 R35 GTR ( sold as pair )
to 1370oC / 2500oF internal and
AF91-8001 Subaru with VF turbocharger internal gate
1000oC / 1832oF external
AF91-8011 Mitsubishi Evolution 7-9 ( 4G63 )

Part No Description - To Suit CARBON SERIES

AF91-8800 Ford XR6 BA/BF/FG or GT30/GT35 with internal gate
AF91-8806 Suit GT25/GT28 Internal gate (T28) AF91-8810 R35 GTR ( sold as pair )
AF91-8802 Suit GT30-35/GT40 External gate (T3) AF91-8801 Subaru with VF turbocharger internal gate
AF91-8804 Suit T04 & GT42 External gate (T4) AF91-8811 Mitsubishi Evolution 7-9 ( 4G63 )
AF91-8805 Suit GT45/GT47 External gate (T6)
aeroflowperformance.com 269
 INSULATION & ACCESSORIES

EXHAUST INSULATION HEAT WRAP

(White and Black)
Aeroflow’s exhaust wrap is an innovative way to reduce unwanted and
power-robbing engine compartment heat. By wrapping your exhaust
headers and down pipes you decrease exhaust density and increase
exhaust flow resulting in more power! The white and black exhaust wrap
is rated to withstand 650oC (1200oF) direct heat and 1100oC (2000oF)
of radiant heat.

Part No Colour Description

WASTEGATE TURBO BAG / BLANKET AF91-3000

AF91-3001
White
White
25.4mm (1”) x 15.24m (50ft)
50.8mm (2”) x 15.24m (50ft)
COOLING, INSULATION & AIR CONDITIONING

AF91-3002 White 25.4mm (1”) x 4.57m (15ft)

The Aeroflow Performance external wastegate bag / blanket range provides high
AF91-3003 White 50.8mm (2”) x 4.57m (15ft)
quality material selection, design, and construction, whilst at an affordable price.
AF91-3004 Black 25.4mm (1”) x 15.24m (50ft)
These wastegate bags are designed to help minimize the heat soak transfer
AF91-3005 Black 50.8mm (2) x 15.24m (50ft)
between the main body and actuator body of the wastegate. This will allow a
AF91-3006 Black 25.4mm (1”) x 4.57m (15ft)
more stable operation of the wastegate valve allowing consistent performance of
AF91-3007 Black 50.8mm (2”) x 4.57m (15ft)
the turbocharger. The added benefit from these bags will prevent the heat from
damaging components surrounding the external wastegates such as wiring and
hoses.
Will suit Aeroflow External Wastegates. May also suit other brands.
Available in two different options titanium and carbon.

Part No Description - To Suit

TITANIUM SERIES
AF91-8038 38mm wastegate bag titanium
AF91-8044 44mm wastegate bag titanium
AF91-8060 60mm wastegate bag titanium

CARBON SERIES
AF91-8838 38mm wastegate bag carbon
AF91-8844 44mm wastegate bag carbon
AF91-8860 60mm wastegate bag carbon

WRAP GUIDE
To work out length of exhaust wrap that is required for each tube use this
chart. Lengths are approximate and are calculated using 50% overwrap.
For 2” wide exhaust wrap be sure to add 0.666 ft for every bend and up to
1.33 ft for a 90 degree bend.
For 1” wide exhaust wrap be sure to add 1.08 ft for every bend and up to
2.08 ft for a 90 degree bend.

Tube Dia Tube Length Wrap Length Required

25.4cm (1”) Wrap 50.8cm (2”) Wrap
1” 30.4 cm (1ft ) 205cm (6.75 ft) 80.7cm ( 2.65 ft )
1-1/8” 30.4 cm (1ft ) 229cm (7.534 ft) 86.8cm ( 2.85 ft ) EXHAUST INSULATION HEAT WRAP
1-1/4” 30.4 cm (1ft ) 254cm (8.35 ft) 95cm ( 3.12 ft )
1-3/8” 30.4 cm (1ft ) 277cm (9.11 ft) 102cm ( 3.37 ft ) (Titanium)
1-1/2” 30.4 cm (1ft ) 302cm (9.92 ft) 111cm ( 3.64 ft ) Aeroflow’s Titanium exhaust wrap is an innovative way to reduce unwanted
1-5/8” 30.4 cm (1ft ) 326cm (10.71 ft) 118cm ( 2.9 ft ) and power-robbing engine compartment heat. By wrapping your exhaust
1-3/4” 30.4 cm (1ft ) 350cm (11.5 ft) 127cm ( 4.17 ft ) headers and down pipes you decrease exhaust density and increase exhaust
1-7/8” 30.4 cm (1ft ) 374cm (12.28 ft) 135cm ( 4.43 ft ) flow resulting in more power! The Titanium exhaust wrap is rated to withstand
2” 30.4 cm (1ft ) 398cm (13.07 ft) 142cm ( 4.68 ft ) 980oC (1800oF) and 1371oC (2500oF) of intermittent radiant heat.
2-1/8” 30.4 cm (1ft ) 422cm (13.85 ft) 150cm ( 4.95 ft )
2-1/4” 30.4 cm (1ft ) 446cm (14.64 ft) 158cm ( 5.21 ft ) Part No Colour Description
2-1/2” 30.4 cm (1ft ) 494cm (16.21 ft) 175cm ( 5.74 ft )
2-3/4” 30.4 cm (1ft ) 542cm (17.78 ft) 191cm ( 6.26 ft ) AF91-3008 Titanium 25.4mm (1”) x 15.24m (50ft)
3” 30.4 cm (1ft ) 589cm (19.35 ft) 206cm ( 6.78 ft ) AF91-3009 Titanium 50.8mm (2”) x 15.24m (50ft)
3.5” 30.4 cm (1ft ) 685cm (22.49 ft) 239cm ( 7.83 ft ) AF91-3010 Titanium 25.4mm (1”) x 4.57m (15ft)
4” 30.4 cm (1ft ) 773cm (25.63ft) 271cm ( 8.88 ft ) AF91-3011 Titanium 50.8mm (2”) x 4.57m (15ft)

270 aeroflowperformance.com
 INSULATION & ACCESSORIES

WIRE & HOSE OVERWRAP

Insulates hoses and cables in high heat areas. Withstands up to 410oF /
210oC and splashes of 660oF / 350oC. Not recommended for direct contact
with heat source. Available in 3.7m / 12ft or 1m / 3ft lengths

Part No I.D. Suits Hose Length

EXHAUST INSULATION HEAT WRAP AF91-9900
AF91-9901
6.35mm
12.7mm
1/4”
1/2”
-4,(-3 & -4 PTFE)
-5,(-6 PTFE)
1m or 3ft
1m or 3ft
(Black Titanium)

COOLING, INSULATION & AIR CONDITIONING

AF91-9902 25.4mm 1” -6, -8, -10, -12 1m or 3ft
AF91-9950 6.35mm 1/4” -4,(-3 & -4 PTFE) 3.7m or 12ft
Aeroflow’s Black Titanium exhaust wrap is an innovative way to reduce AF91-9951 12.7mm 1/2” -5,(-6 PTFE) 3.7m or 12ft
unwanted and power-robbing engine compartment heat. By wrapping AF91-9952 25.4mm 1” -6, -8, -10, -12 3.7m or 12ft
your exhaust headers and down pipes you decrease exhaust density
and increase exhaust flow resulting in more power! The Black Titanium
exhaust wrap is rated to withstand 980oC (1800oF) and 1371oC
(2500oF) of intermittent radiant heat.

Part No Colour Description

AF91-3012 Black Titanium 25.4mm (1”) x 15.24m (50ft)
AF91-3013 Black Titanium 50.8mm (2”) x 15.24m (50ft)
AF91-3014 Black Titanium 25.4mm (1”) x 4.57m (15ft)
AF91-3015 Black Titanium 50.8mm (2”) x 4.57m (15ft)
BRAIDED SLEEVE HEAT SHIELD
Insulates hoses and cables in high heat areas. Withstands up to 500oC
(932oF) and splashes of 1100oC (2000oF). Not recommended for direct
contact with heat source. Available in 3.7m (12ft) or 1m (3ft) lengths

Part No I.D. Suits Hose Length

AF91-9000 6.35mm 1/4” -4,(-3 & -4 PTFE) 1m or 3ft
AF91-9001 12.7mm 1/2” -5,(-6 PTFE) 1m or 3ft
AF91-9002 25.4mm 1” -6, -8, -10, -12 1m or 3ft
AF91-9050 6.35mm 1/4” -5,(-6 PTFE) 3.7m or 12ft
AF91-9051 12.7mm 1/2” -5,(-6 PTFE) 3.7m or 12ft
AF91-9052 25.4mm 1” -6, -8, -10, -12 3.7m or 12ft

HEATGUARD HEAT SHIELD

Insulates hoses and cables in high heat areas. Withstands up to 260oC
(500oF) and splashes of 1100oC (2000oF). Not recommended for direct
contact with heat source. Available in 3.7m (12ft)or 1m (3ft) lengths

Part No I.D. Suits Hose Length

AF91-1999 7.9mm 5/16” -3, -4 3.7m or 12ft
SNAP-LOCK TIES
AF91-2000 12.7mm 1/2” -5,(-6 PTFE) 3.7m or 12ft Aeroflow’s Snap-Lock ties are a perfect choice for securing your wrap or
AF91-2003 19.05mm 3/4” -6 to -8,(-8 to -10 PTFE) 3.7m or 12ft cables from extreme heat areas that will handle 200lbs of tensile strength.
AF91-2001 25.4mm 1” -10, (-12 PTFE) 3.7m or 12ft Simply pull to tighten. Manufactured from 316 stainless steel and will
AF91-2002 38.1mm 1-1/2” -12, -16, -20 3.7m or 12ft handle 1370oC (2500oF). Available in two kits: 229mm (9”) Long x 12
AF91-1909 7.9mm 5/16” -3, -4 1m or 3ft pieces and 457mm (18”) long x 6 pieces.
AF91-2010 12.7mm 1/2” -5,(-6 PTFE) 1m or 3ft
AF91-2013 19.05mm 3/4” -6 to -8,(-8 to -10 PTFE) 1m or 3ft Part No Description
AF91-2011 25.4mm 1” -10, (-12 PTFE) 1m or 3ft
AF91-2012 38.1mm 1-1/2” -12, -16, -20 1m or 3ft AF91-7000 Snap Lock Ties 12 Piece x 229mm (9”) Long
AF91-7001 Snap Lock Ties 6 Piece x 457mm (18”) Long

aeroflowperformance.com 271
 INSULATION & ACCESSORIES

FLEX BRAID WRAP

Black tight weave high coverage Aeroflow’s heat-flex braid is lightweight BARRICADE EMBOSSED
and extremely flexible. Heat-flex braid can be used for insulating wire
bundles or cables while offering that factory look. Heat-flex braid can also HEAT SHIELD
be used on heater and radiator hoses. With a tough woven construction, The Aeroflow Performance multi layered aluminium embossed heat
heat-flex provides a continuous temperature rating of up to 127°C (260°F) shielding is the most effective way to control and manage radiant heat
and a melting temperature of 250°C (482°F). Available in 1m (3ft) and in any application. It can cut the effects of radiant heat by up to 90% to
7.6m/25ft length rolls in 6.35mm (1/4”), 12.7mm (1/2”), 25.4mm (1”) and protect vital components in your vehicle from heat soak. This shielding is
38.1mm (1-1/2”) size I.D. Can be terminated with heat-shrink or Aeroflow easy to cut with tin snips or scissors and can be drilled or screwed together
hose end finishers for that professional look. to create a variety of different shapes. Simply fold and form edges with a
hammer on a square edge.
Part No Description Length Thickness: 0.85mm (1/32”)
COOLING, INSULATION & AIR CONDITIONING

AF91-7050 6.35mm (1/4”) 1m 3ft

AF91-7051 12.7mm (1/2”) 1m 3ft
AF91-7052 25.4mm (1”) 1m 3ft
AF91-7053 38.1mm (1-1/2”) 1m 3ft Part No Description
AF91-7550 6.35mm (1/4”) 7.6m 25ft
AF91-4580 12” (304.80mm ) x 12” (304.80mm )
AF91-7551 12.7mm (1/2”) 7.6m 25ft
AF91-4581 12” (304.80mm ) x 24” ( 609.60mm )
AF91-7552 25.4mm (1” ) 7.6m 25ft
AF91-4582 24” ( 609.60mm ) x 24” (609.60mm )
AF91-7553 38.1mm (1-1/2”) 7.6m 25ft

AF91-6051

AF91-6050

HEAT GUARD
SPARK PLUG
BOOTS
Aeroflow’s spark plug boot and ignition wire insulator is the perfect
solution for tight headers and turbo manifolds, also act as a dual purpose
spark insulator to reduce misfires, extend plug wire and boot life and
will not react to petroleum products. Universal size fits most boot sizes
and can easily flex for angled boot applications. Easy to install and most
importantly non-flammable. Sold as 4 packs.
Dimensions: 155mm (6-7/64”) long, 25.4mm (1”) diameter.

Part No Description
AF91-6050 Black 1100oC (2000oF) radiant, 260oC (500oF direct
AF91-6051 Titanium 1650oC (3000o F) radiant, 1100oC (2000oF) direct

272 aeroflowperformance.com
 INSULATION & ACCESSORIES

FLEXIBLE SELF ADHESIVE

HEAT BARRIER
Aeroflow’s adhesive backed barrier has the same high quality features as
the flexible heat barrier with the added adhesive back allowing neat and
easy installation. Flexible adhesive backed barrier can only be applied one
way adhesive side down. Withstands 1100oC (2000oF) radiant heat and
650oC (1200oF) direct heat, can be trimmed to fit then simply peel and
stick.

Part No Description Style

AF91-4000 38.1mm (1.5” ) x 4.5m (15ft) Roll
AF91-4001 305mm (12”) x 305mm (12”) Sheet
AF91-4002 305mm (12”) x 610mm (24”) Sheet
AF91-4003 610mm (24”) x 915mm (36”) Sheet
AF91-4004 610mm (24”) x 1220mm (48”) Sheet
AF91-4005 159mm (6.25”) x 660mm (26”) Sheet

COOLING, INSULATION & AIR CONDITIONING

BARRICADE NOISE & FLEXIBLE
HEAT INSULATION HEAT
Aeroflow BARRICADE peel and stick adhesive backed heat / noise
BARRIER
suppressor is constructed from the highest quality material. The pressure Aeroflow’s heat barrier is an
sensitive adhesive makes it a breeze to install especially in hard to reach excellent method for reflecting unwanted
places. The versatility of the BARRICADE allows it to be used in interior heat from surfaces needing protection.
and exterior applications to block out heat around fuel tanks and exhaust Minimal thickness to provide an easy installation
systems and provide acoustic sound deadening inside the cabin. and can be retained in place with Aeroflow’s stainless
Thickness of 2.7mm (7/64”) straps or simply riveted in place. When used as a heat SHIELD
the barrier should be installed so the bright metallic surface faces the heat
Part No Description source. When used to RETAIN heat, the fabric side faces the heat source.
This allows the metallic surface to act as a barrier to prevent penetration
AF91-4500 24” ( 609.60mm ) x 30” ( 762mm ) of fluids. Withstands 1100oC (2000oF) radiant heat and 650oC (1200oF)
AF91-4501 24” ( 609.60mm ) x 60” ( 1524mm ) direct heat and can be easily trimmed to desired size.
AF91-4502 24” ( 609.60mm ) x 90” ( 2286mm )
Part No Description
AF91-6000 508mm (20”) x 305mm (12”)
AF91-6001 1016mm (40”) x 305mm (12”)
AF91-6002 1016mm (40”) x 914mm (36”)
AF91-6003 1016mm (40”) x 183mm (72”)

BARRICADE ROLLER APPLICATOR

Installation of the BARRICADE is made easy with our BARRICADE
ALUMINISED STARTER HEAT SHIELD
applicator roller to help form the BARRICADE for a smooth and even finish.
Quality timber handle is versatile for any peel and stick product in the Aeroflow’s Aluminised Starter Heat Shield is the latest in heat prevention
Aeroflow Performance insulation range. It features a sealed bearing spindle to your starter motor. Due to starter problems that can be caused by the
with a urethane wheel that is 50mm (1-61/64) wide. close proximity of an exhaust to the starter, these shields are perfect for
enabling the user to insulate the starter and solenoid.
Withstanding 1100oC (2000oF) radiant heat & 260oC (500oF) of direct
Part No Description heat, this heat shield with protect your starter from heat and increase the
AF98-2113 Roller applicator for Barricade heat shield. longetivity of your starter motor. Supplied with 2 straps.

Part No Description
AF91-6010 Helps deflect heat from headers.

aeroflowperformance.com 273
 INSULATION & AIR CONDITIONING

ALUMINISED HEAT SLEEVE

Aeroflow’s heat sleeve is designed to simply slide over hoses, cables
and wires to provide the ultimate protection from radiant heat. It
is constructed from a fibreglass inner weave and protected by an
aluminised heat barrier that also protects from fluid and oil spills and is
capable of withstanding 260°C (500°F) direct heat and 1100°C (2000°F)
radiant heat. Note: Please ensure all
hose is thoroughly cleaned
Part No Min ID Max ID Length out before use.

AF91-5000 6.35mm 1/4” 12.7mm 1/2” 1m 3ft

AF91-5001 15.8mm 5/8” 25.4mm 1” 1m 3ft
AF91-5002 28.5mm 1-1/8” 38.1mm 1-1/2” 1m 3ft
AF91-5003
AF91-5004
41.2mm
54mm
1-5/8”
2-1/8”
50.8mm
63.5mm
2”
2-1/2”
1m
1m
3ft
3ft
800 SERIES NYLON STAINLESS STEEL
AF91-5010 6.35mm 1/4” 12.7mm 1/2” 3.7m 12ft AIR CONDITIONING HOSE
AF91-5011 15.8mm 5/8” 25.4mm 1” 3.7m 12ft
AF91-5012 28.5mm 1-1/8” 38.1mm 1-1/2” 3.7m 12ft Aeroflow air conditioning hose has an attractive stainless steel outer braid
AF91-5013 41.2mm 1-5/8” 50.8mm 2” 3.7m 12ft with a nylon inner tube for superior refrigerant performance.
COOLING, INSULATION & AIR CONDITIONING

AF91-5014 54mm 2-1/8” 63.5mm 2-1/2” 3.7m 12ft

• Suited for use with R-134A Refrigerant.
• Max operating pressure 34.5 BAR (500PSI)

MANIFOLD # 1M 2 Metres 3 Metres

HEAT SHIELD 6 AF800-06-1M AF800-06-2M AF800-06-3M
8 AF800-08-1M AF800-08-2M AF800-08-3M
TO SUIT LS 10 AF800-10-1M AF800-10-2M AF800-10-3M
INTAKE
Aeroflow’s LS Intake Manifold will 800 Series Hose Specifications
give you an increase in horsepower!
By shielding the intake manifold and # Hose I.D. Hose O.D Min Bend Radius
reducing the heat radiating up from the 6 8.38mm 21/64” 11.17mm 7/16” 101.6mm 4”
engine, this shield will lower intake manifold 8 10.92mm 27/64” 13.71mm 35/64” 133.35mm 5-1/4”
temperatures creating a more dense fuel and air 10 13.46mm 17/32” 16mm 41/64” 165.1mm 6-1/2”
mixture hence creating more power.
Being adhesive backed, the heavy duty adhesive will stick to any clean
semi-smooth surface and will enhance the look and performance of your
LS! With oversized front and rear, with some slight trimming it will be a
perfect fit to your manifold. Withstands up to 1100oC (2000oF) radiant heat
& 260oC (500oF) of direct heat.

Part No Description
AF91-4050 Suits LS Chev intake manifold shield trim to fit POLISHED ALUMINIUM
A/C CHARGE PORT COVERS
Part No Description
AF88-08-06 Suits large #6 and #8 charge port fittings
AF88-10 Suits small #10 charge port fittings

REPLACEMENT A/C
FUEL JUG COVERS FITTING O-RINGS
Aeroflow’s fuel jug cover will keep your race fuel cool! Available to suit both
square and round 18.9L (5 gal) jug styles. Protect your fuel at the track. Description
# Part No
Part No Description 6 AF188-06 10 Pack
8 AF188-08 10 Pack
AF91-8050 Square or Round jug cover 10 AF188-10 10 Pack

274 aeroflowperformance.com
 AIR CONDITIONING

REPLACEMENT A/C VALVES

Part No Description
AFFCV-08-06 Suits large #6 and #8 charge port fittings
AFFCV-10 Suits small #10 charge port fittings
CHROME PLATED STAINLESS STEEL
A/C FITTINGS WITH CHARGE PORT
# Straight 45o 90o 135o
6 AFFCE-06B AFFCE-0645B AFFCE-0690B AFFCE-06135B
8 AFFCE-08B AFFCE-0845B AFFCE-0890B AFFCE-08135B
10 AFFCE-10B AFFCE-1045B AFFCE-1090B AFFCE-10135B
REPLACEMENT OLIVES for A/C Fittings (5 pack)

# Part No

COOLING, INSULATION & AIR CONDITIONING

6 AFFCM-06
8 AFFCM-08
10 AFFCM-10

CHROME PLATED STAINLESS STEEL

A/C INLINE FITTINGS WITH CHARGE PORT
CHROME PLATED STAINLESS STEEL # Straight
AIR CONDITIONING FITTINGS 6 AFFCEL-06B
Hard to find air conditioning fittings are available in Aeroflow’s huge range of 8 AFFCEL-08B
fittings and adaptors. Designed to be used with R-134A refrigerant the nylon 10 AFFCEL-10B
tube core inside a braided stainless steel covered hose will work within a
temperature range of -40oC to 121oC (-40oF to +250oF). Dress up your air NOTE: All #6 and #8 A/C charge port fittings come with large charge port. All
conditioning with these chrome plated stainless steel reusable fittings. #10 A/C fittings come with small charge port.

CHROME PLATED STAINLESS STEEL

A/C FITTINGS NO CHARGE PORT
# Straight 45o 90o 135o
6 AFFCE-06-STR AFFCE-0645 AFFCE-0690 AFFCE-06135
8 AFFCE-08-STR AFFCE-0845 AFFCE-0890 AFFCE-08135
10 AFFCE-10-STR AFFCE-1045 AFFCE-1090 AFFCE-10135

aeroflowperformance.com 275
 AIR CONDITIONING

A/C FITTING DIAGRAM

COOLING, INSULATION & AIR CONDITIONING

BILLET LOW MOUNT A/C BRACKET

Aeroflow has developed an air conditioning compressor bracket that
positions the compressor low and snug on the passenger side, beside the
block. Made to suit small block Chevy. These brackets are a custom fit and
may suit universal applications in hot rods and muscle cars fitted with small
block Chevs dependant on space.
(shown fitted in 1969 Camaro). Used with high mount P/S Bracket

Part No Colour Description

S/B CHEVY
AF64-4012 Polished Suit Small Block Chevy
AF64-4012BLK Black Suit Small Block Chevy

276 aeroflowperformance.com
 AIR CONDITIONING

38mm x 80mm
1.5” x 3.25”

UNIVERSAL 2 PORT COMPONENT BULKHEAD

38mm x 80mm Aeroflow now offer a budget conscious solution for running the 2 port bulk-
1.5” x 3.25” head. The 2 port plate can be mounted vertically or horizontally. Available
in polished or black anodised finish and sold without adapter fitting inserts
so you can choose to run any combination of either -6AN, -8AN or -10AN
male nipples.

Part No Finish Description

Bare bulkhead mounting plate ONLY
AF88-2006 Polished Bare bulkhead mounting plate ONLY
AF88-2006BLK Black Bare bulkhead mounting plate ONLY

COOLING, INSULATION & AIR CONDITIONING

AN bulkheads SOLD AS SINGLES
AF88-2007 Polished -6 AN bulkhead fitting with nut
80mm x 80mm AF88-2007BLK Black -6 AN bulkhead fitting with nut
3.25” x 3.25” AF88-2008 Polished -8 AN bulkhead fitting with nut
AF88-2008BLK Black -8 AN bulkhead fitting with nut
AF88-2009 Polished -10 AN bulkhead fitting with nut
AF88-2009BLK Black -10 AN bulkhead fitting with nut

38mm x 165mm
1.5” x 6.5”

BILLET A/C BULKHEADS

Billet 6061-T6 Aluminium bulkheads give your ride that custom look. Available
in # sizes or push-on rear fittings for (heater side only)

Part No Colour Ports Description

A/C O-Ring to AN FITTING ADAPTER
AF88-2000 Polished 2 port 1x#6 1x#10
AF88-2000BLK Black 2 port 1x#6 1x#10 These billet aluminium adapters allow you to use AN fittings on air
AF88-2001 Polished 2 port 2x #10 conditioning bulkheads. Great for heater hose applications.
AF88-2001BLK Black 2 port 2x #10
AF88-2002 Polished 2 port 2x #10 (5/8” rear Push-on Part No Description
fittings for heater)
AF88-3003 #10 A/C O-ring converts to -10AN (1 per pack)
AF88-2002BLK Black 2 port 2x #10 (5/8” rear Push-on
fittings for heater)
AF88-2003 Polished 4 port Square 3x #10 1x #6
AF88-2003BLK Black 4 port Square 3x #10 1x #6
AF88-2004 Polished 4port Square 3 x #10 1x #6 NPT to A/C

(5/8” rear push-on fittings
for heater only )
FITTING
AF88-2004BLK Black 4port Square 3 x #10 1x #6 ADAPTER
(5/8” rear push-on fittings
These stainless steel adapters allow
for heater only )
you to use air conditioning hose and
AF88-2005 Polished 4 port Inline 3 x #10 1x #6 fittings for heater applications. Fits
(5/8” rear push-on fittings manifolds and water pumps.
for heater only)
AF88-2005BLK Black 4 port Inline 3 x #10 1x #6
(5/8” rear push-on fittings Part No Description
for heater only) AF88-3000 3/8” NPT to #10 A/C O-ring
AF88-3001 1/2” NPT to #10 A/C O-ring

aeroflowperformance.com 277
 SHIFTERS

BANG SHIFT BULLET RATCHET SHIFTERS

The Bang Shift by Aeroflow Bullet Ratchet Shifter will propel you into the
modern age. With the good looks and easy to use functions which allows for a
triggerless ratchet shift makes it the most dependable shifter on the market.
To access your park, neutral and reverse gears you simply lift the gear shifter
straight up and pull forward to let the handle drop into the desired gear. This
reverse lockout safety feature means you won’t be accidentally over-shifting
into reverse while making a pass at the strip. To use the ratcheting function
of the Bullet shifter, shift into low gear, launch the vehicle and hit the shifter
forward when it’s time to shift.
The unique flat billet top plate allows the Bullet shifter to be used in both right
and left hand drive configurations! Left hand drive conversion sold separately.
The top plate, shifter stick and billet gear knob with interchangeable inserts
mounts on top of the black plastic console base which can be trimmed to fit
your transmission tunnel. The black plastic slide cover built into the top plate
finishes off the Bullet shifter to give your interior the OEM look while retaining
that classic tough muscle car look.
The Bullet shifter includes a LED lit gear position indicator in the top plate,
PERFOR M A N C E S H I FTERS
a micro-switch for reverse lights and a neutral safety switch preventing
accidental starts when in gear all to keep the engineer happy and your vehicle
safe.
Included with this kit is an Aeroflow Performance 5-foot long performance
shifter cable, all necessary hardware , detailed instructions for an easy
installation you can do at home, cable brackets and transmission shifter levers
to suit the following :
• GM TH350, TH400, 700R4, 200R4, 4L60, 4L60e - 4L80e without PRNDL
switch
( 4L60E, 4L65E, 4L80E, 4L85E with PRNDL switch brackets sold separately
AF72-9052 ).
• Ford C4, C5, C6 ( AOD brackets sold separately AF72-9055 )
• Chrysler 1966 and later Torqueflite A727 and A904.
• Overall dimensions – Length 311mm (12-1/4”), Width 157mm (6-13/16”),
Total Height 311mm (12-1/4”)

Part No Colour Description

TRANSMISSION & DRIVELINE

AF72-9000 Silver Bang Shift Bullet Ratchet Shifter

with Universal fitment kit
AF72-9000BLK Black Bang Shift Bullet Ratchet Shifter
with Universal fitment kit

Spare Parts For AF72-9000 BULLET Shifter

Part No Description
AF72-9900 Silver finish billet round gear knob with “A” logo top insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to fit
3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9900BLK Black finish billet round gear knob with “A” logo top insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to
fit 3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9905 Silver finish billet round gear knob with NO insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to fit
3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9905BLK Black finish billet round gear knob with NO insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to fit
3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9906BLK Replacement BLACK momentary button
AF72-9907BLK Replacement BLACK on/off button
AF72-9930 Black plastic base cover skirt to fit Bullet shifter only
AF72-9031 Indicator linkage kit ( linkage rod x 1 + plastic clips x 2 + c-clip x 1 )
AF72-9032 Replacement plastic clips to suit linkage rod ( plastic clips x 2 )
AF72-9033 Replacement C-Clip to suit linkage rod ( c-clip x 1 )
AF72-9935 Left hand drive conversion kit Silver finish
AF72-9935BLK Left hand drive conversion kit Black finish
AF72-9941 Replacement indicator windows to fit Bullet shifter only
Includes the following patterns :
2 speed forward pattern
3 speed forward pattern
4 speed forward pattern
2 speed reverse pattern
3 speed reverse pattern
4 speed reverse pattern
AF72-9950 Indicator globe socket holder and bracket suits Bullet shifter only
( T-10 globe Sold Separately )
AF72-9955 T-10 LED replacement globe fits all Aeroflow shifters
AF72-9990 Replacement C-Clips to fit all Aeroflow shifters ( pack of 4 )
AF72-9991 Replacement Park Pin / Forward Gear Selector Pin with two C-Clips
included fits all Aeroflow shifters
AF72-9993 Replacement Torsion Spring fits all Aeroflow shifters
AF72-9995 Replacement Park Pawl spring suits Bullet shifter only

278 aeroflowperformance.com
 SHIFTERS

BANG SHIFT NITRO RATCHET SHIFTERS

The Bang Shift by Aeroflow Nitro Ratchet shifter is a full ratchet shifter
that not only performs great on the street but also on the drag strip. This
positive ratchet design self-centres the handle in the middle of the shifter
so all the user has to do is click once up or click once down for each
gear, it’s just that simple !. No reason to ever miss a gear either up or
down by over shifting. With this self-centred design it allows maximum
clearance for tight fitting consoles in all vehicle applications.
To back up the incredible ratchet mechanism inside this Nitro shifter, it is
in-cased in a full billet bolt together bespoke outer cover to give that high
quality finish. Featuring a bolt on centre cover with a rubber insert to
keep unwanted dirt and dust out of the mechanism. As well as a reverse
lockout feature that only requires one hand to operate.
The Nitro shifter includes a LED lit gear position indicator in the top
plate, two micro-switches for reverse lights and a neutral safety switch PERFOR M A N C E S H I FTERS

preventing accidental starts when in gear all to keep the engineer happy
and your vehicle safe. A billet round gear knob with interchangeable
inserts sits on top the shifter stick.
Included with this kit is an Aeroflow Performance 5-foot long race shifter
cable, all necessary hardware , detailed instructions for an easy installa-
tion you can do at home, cable brackets and transmission shifter levers
to suit the following three and four-speed automatic transmissions :
• GM TH350, TH400, 700R4, 200R4, 4L60, 4L60e - 4L80e without
PRNDL switch ( 4L60E, 4L65E, 4L80E, 4L85E with PRNDL switch
brackets sold separately AF72-9052 ).
• Ford C4, C5, C6 ( AOD brackets sold separately AF72-9055 )
• Chrysler 1966 and later Torqueflite A727 and A904.
• Overall dimensions – Length 280mm (11.02”), Width 80mm (3.14”),
Total Height 250mm ( 9.84” ).

TRANSMISSION & DRIVELINE

Part No Colour Description
AF72-9010 Silver Bang Shift Nitro Ratchet Shifter
with Universal fitment kit
AF72-9010BLK Black Bang Shift Nitro Ratchet Shifter
with Universal fitment kit

Spare Parts For AF72-9010 NITRO Shifter

Part No Description
AF72-9900 Silver finish billet round gear knob with “A” logo top insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to fit
3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9900BLK Black finish billet round gear knob with “A” logo top insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to
fit 3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9905 Silver finish billet round gear knob with NO insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to fit
3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9905BLK Black finish billet round gear knob with NO insert.
Shifter knob has 1/2-20 internal thread. Also includes thread adapters to fit
3/8-24 , 3/8-16 , 5/16-18 , M8 x 1.25mm ,M10 x 1.25mm M10 x 1.50mm.
AF72-9906BLK Replacement BLACK momentary button
AF72-9907BLK Replacement BLACK on/off button
AF72-9920 Replacement reverse lockout billet cover silver finish
AF72-9920BLK Replacement reverse lockout billet cover black finish
AF72-9925 Replacement rubber insert for top plate assembly
AF72-9940 Replacement indicator windows to fit Pistol & Nitro shifter only
Includes the following patterns :
2 speed forward pattern
3 speed forward pattern
4 speed forward pattern
2 speed reverse pattern
3 speed reverse pattern
4 speed reverse pattern
AF72-9951 Indicator globe socket holder and bracket suits Sniper & Pistol shifters only
( T-10 globe Sold Separately )
AF72-9955 T-10 LED replacement globe fits all Aeroflow shifters
AF72-9990 Replacement C-Clips to fit all Aeroflow shifters ( pack of 4 )
AF72-9991 Replacement Park Pin / Forward Gear Selector Pin with two C-Clips
included fits all Aeroflow shifters
AF72-9993 Replacement Torsion Spring fits all Aeroflow shifters

aeroflowperformance.com 279
 SHIFTERS

BANG SHIFT PISTOL RATCHET SHIFTER

The Bang Shift by Aeroflow Performance Pistol Ratchet shifter that not only
performs great on the street but also on the drag strip. This positive ratchet
design self-centres the handle in the middle of the shifter so all the user has
to do is click once up or click once down for each gear, it’s just that simple !.
No reason to ever miss a gear either up or down by over shifting. With this
self-centred design it allows maximum clearance for tight fitting consoles in
all vehicle applications.
To back up the incredible ratchet mechanism inside this Pistol shifter it is in-
cased in a full billet bolt together bespoke outer cover to give that high quality
finish. Featuring a bolt on top plate with a rubber insert to keep unwanted
dirt and dust out of the mechanism.
The pistol grip handle attached to the shifter stick is a handy two piece bolt
together design that allows interchangeable billet side plates to be purchased
separately. Along with a matching reverse lockout handle that only requires PERFOR M A N C E S H I FTERS
one hand to operate.
The Pistol shifter includes a LED lit gear position indicator in the top plate,
two micro-switches for reverse lights and a neutral safety switch prevent-
ing accidental starts when in gear all to keep the engineer happy and your
vehicle safe.
Included with this kit is an Aeroflow Performance 5-foot long race shifter
cable, all necessary hardware , detailed instructions for an easy installation
you can do at home, cable brackets and transmission shifter levers to suit the
following three and four-speed automatic transmissions :
• GM TH350, TH400, 700R4, 200R4, 4L60, 4L60e - 4L80e without PRNDL
switch ( 4L60E, 4L65E, 4L80E, 4L85E with PRNDL switch brackets sold
separately AF72-9052 ).
• Ford C4, C5, C6 ( AOD brackets sold separately AF72-9055 )
• Chrysler 1966 and later Torqueflite A727 and A904.
Overall dimensions – 280mm ( 11.02” ) Length x 80mm ( 3.14” )
Width x 280mm ( 11.02” ) Total Height
TRANSMISSION & DRIVELINE

Part No Colour Description

AF72-9915BLK
AF72-9012 Silver Bang Shift Pistol Ratchet Shifter Momentary button
with Universal fitment kit
AF72-9012BLK Black Bang Shift Pistol Ratchet Shifter
with Universal fitment kit AF72-9912BLK
Side plate for
button
Spare Parts For AF72-9012 Pistol Shifter
Part No Description
AF72-9910 Replacement SILVER billet pistol grip NO BUTTON
passenger side plate
AF72-9910BLK Replacement BLACK billet pistol grip NO BUTTON
passenger side plate
AF72-9912 Replacement SILVER billet pistol grip
NO BUTTON drivers side plate
AF72-9912BLK Replacement BLACK billet pistol grip
NO BUTTON drivers side plate
AF72-9913 Replacement SILVER billet pistol grip bare driver’s side
plate with button boss. NO button included.
AF72-9913BLK Replacement BLACK billet pistol grip bare driver’s side
plate with button boss. NO button included.
AF72-9906BLK Replacement BLACK momentary button
AF72-9907BLK Replacement BLACK on/off button
AF72-9920 Replacement SILVER reverse lockout billet cover
AF72-9920BLK Replacement BLACK reverse lockout billet cover
AF72-9925 Replacement rubber insert for top plate assembly
AF72-9940 Replacement indicator windows to fit Pistol & Nitro shifters only
Includes the following patterns :
2 speed forward pattern
3 speed forward pattern
4 speed forward pattern
2 speed reverse pattern
3 speed reverse pattern
4 speed reverse pattern
AF72-9951 Indicator globe socket holder and bracket suits Nitro & Pistol
shifters only ( T-10 globe Sold Separately )
AF72-9955 T-10 LED replacement globe fits all Aeroflow shifters
AF72-9990 Replacement C-Clips to fit all Aeroflow shifters ( pack of 4 )
AF72-9991 Replacement Park Pin / Forward Gear Selector Pin with two
C-Clips included fits all Aeroflow shifters
AF72-9993 Replacement Torsion Spring fits all Aeroflow shifters

280 aeroflowperformance.com
 SHIFTER ACCESSORIES

AF72-9050

PERFOR M A N C E S H I FTERS

AF72-9054

AF72-9053

SHIFTER MOUNTING ACCESSORIES

These Aeroflow Performance shifter mounting options are the Ideal way AF72-9052
for getting your Aeroflow shifter or other similar branded shifters down AF72-9051
below console level to run either a factory console or just for that cleaner
look. The user can get their new shifter mounting in that perfect spot on
top of your transmission tunnel or even under your factory console for
that OEM look. They come powder coated black for extra durability and
made from the quality steel construction that won’t twist or flex under hard
shifting. Available for Holden Commodore models VB-VK, VL-VS and VT/

TRANSMISSION & DRIVELINE

VX/VY/VZ
NOTE: These drop boxes are a universal design and may require modifi-
cations to be made to your console surround for best fitment depending on
shifter choice.
NOTE: Best suited for ratchet style shifters as some shifters may not work
due to the throw of the handle.

Part No Suits
AF72-9800 Shifter drop box to suit VB-VK commodore
AF72-9801 Shifter drop box to suit VL-VS commodore
AF72-9802 Shifter mounting plate to suit VT-VX-VY-VZ commodore
AF72-9802 Shifter mounting plate to suit VE-VF commodore

AF72-9055
SHIFTER BRACKET
CABLE END KIT
The Aeroflow swivel & pin kit is designed to thread
onto the end of your shifter cable and push through
your transmission shift bracket. They will allow your
shifter to keep operating correctly when the original
AF72-2001 AF72-2000
swivel is worn out and makes shifting difficult.

Part No Description
AF72-5054 Shifter cable/bracket swivel & pin kit

BRACKET & LEVER KIT

Aeroflow Performance offers a full line of shifter levers and cable bracket
kits to suit a wide variety of common automatic transmissions used in the
market today. These kits are can be used as replacements for lost or
damaged parts. They are designed to suit various brand shifters including
our Aeroflow Performance range of shifters.

NEUTRAL / REVERSE SAFETY SWITCH Part No Suits

This safety switch fits into your shifter to stop you being able to start the
AF72-9050 GM TH400,350,250,200,200-4R & 700R4
vehicle while your in gear. When installed correctly the switch only allows the
AF72-9051 GM 62-73 powerglide with no T.V hole
vehicle to start in park or neutral. Also activates reverse lights.
AF72-9052 GM 4L60E, 4L65E, 4L80E, 4L85E with PRNDL switch
Suits B&M shifters.
AF72-9053 C6 transmission
AF72-9054 C4 transmission
Part No Description AF72-9055 FORD AOD transmission
AF72-2000 HOLDEN TRIMATIC Drivers Side
AF72-5055 Neutral reverse safety switch
AF72-2001 HOLDEN TRIMATIC Passenger Side

aeroflowperformance.com 281
 TRANSMISSION ACCESSORIES

AF72-1000

AF72-1001

INSULATE CABLES FROM HEAT

Ensure to correctly run your shifter cable away from any heat source
such as exhaust systems. It is recommended to run a heat sleeve or
make a heat shield from embossed aluminium to protect the cable
from damage.
STANDARD SHIFTER CABLES
These 5 Foot standard replacement shifter cables for Aeroflow Perfor-
mance Bullet shifters, most B&M shifters and Hurst shifters are a great
alternative from Aeroflow Performance. They are designed with enough
TRANSMISSION & DRIVELINE

clearance to reduce backlash with a 6.35mm (.250” )‘long-lay’ outer jacket

for durability which is less-likely to kink during operation. The cable fea-
tures an eyelet at one end to connect to the shifter, a 10-32 threaded end
at the transmission side of the cable. This is the standard cable supplied
with the Aeroflow Bullet shifter, most B&M shifters and Hurst Pro-Matic.
TRANSMISSION
Part No Colour Description DIPSTICKS
AF72-1000 Grey Suits Hurst Pro-matic and V-matic Shifters
AF72-1001 Black Suits Aeroflow Bullet and B&M shifters Aeroflow’s Flexible Firewall Mount
Transmission Dipsticks are 308
stainless steel braided covering over a
hard-wearing high quality PTFE liner.
The handle and ends are made from
6061-T6 aluminium then hand polished
and chrome plated. They feature double
O-rings for a secure seal. These not only
look great but the flexible inner dipstick is
marked to give accurate trans fluid level
AF72-1002 readings.
Also Available in Black
anodised finish.
All firewall mount dipsticks are 24”
(610mm) in length.

RACE SHIFTER CABLES

This Aeroflow Performance hard-core heavy duty Race 5 Foot shifter cable
is the must have cable weather it’s a street car or a race car. With a large
9.52mm ( 3/8” ) outer diameter cable housing that is pre-lubed with HPRE
oil for smooth operation. They are designed with enough clearance to
reduce backlash with a 9.52mm (.375”) ‘long-lay’ outer jacket for durability Part No Finish Description
which is less-likely to kink during operation. The cable features an eyelet at
one end to connect to the shifter, a 10-32 threaded end at the transmission AF72-2500 Chrome Description
GM TH350/400 Flexible dipstick firewall mount
side of the cable with rotary swaged ends. This is the standard cable AF72-2501 Chrome GM Powerglide Flexible dipstick firewall mount
supplied with the Aeroflow Nitro and Pistol and some B&M shifters. AF72-2502 Chrome Ford C4 Flexible dipstick in case firewall mount
AF72-2503 Chrome Ford C4 Flexible dipstick in pan firewall mount
AF72-2500BLK Black GM TH350/400 Flexible dipstick firewall mount
Part No Colour Total Length AF72-2501BLK Black GM Powerglide Flexible dipstick firewall mount
AF72-2502BLK Black Ford C4 Flexible dipstick in case firewall mount
AF72-1007 Red 914mm (3ft) Race cable
AF72-2503BLK Black Ford C4 Flexible dipstick in pan firewall mount
AF72-1008 Red 1219mm (4ft) Race cable
Note: All firewall mount dipsticks are 24” (610mm) in length.
AF72-1002 Red 1524mm (5ft) Race cable
Note: AF72-2501 also suits GM Trimatic transmission but requires a modification
AF72-1009 Red 2438mm (8ft) Race cable
which involves shortening the braided body by 15mm (19/32”).

282 aeroflowperformance.com
 TRANSMISSION PANS

STAMPED STEEL TRANSMISSION PANS

These Aeroflow transmission pans add a little zing to the undercarriage of any
vehicle. The included drain plug makes transmission service a snap. These
pans are thicker than stock so you don’t have to worry about leaky pan rails.
Available in two great finishes; chrome plated and black electrolysis.

DIPSTICK FUNNEL
The Aeroflow Performance dipstick funnel is a handy product that allows you
to avoid any spillage when filling or topping up your engine or transmission
oil. Just remove the dipstick handle and plug this in its spot and place your
funnel in the plastic tube. Suits all Aeroflow Performance dipsticks.

Part No Description
AF59-1015 Dipstick filler adapter with tube

Suits Ford C4 (case fill) extra capacity 76mm (3’’) deep

AF1825-3000 Chrome
AF1826-3000 Black
PAN FILL
CONVERSION
ADAPTER SUITS
FORD C4
Aeroflow now offer a simple and easy conversion kit to allow you to use
our steel trans pans (AF1825-3000 & AF1826-3000) with Aeroflow pan fill
dip-sticks (AF72-2503) or retain your factory pan fill dip-sticks and allow you
to screw the dip-stick tube directly into the pan and retains an accurate full

TRANSMISSION & DRIVELINE

mark.

Suits GM Powerglide with drain plug 51mm (2’’) deep

Part No Colour Description
AF1825-3002 Chrome
AF72-1555 Black C4 pan fill conversion adapter AF1826-3002 Black

Suits GM TH400 (deep with plug) 76mm (3’’) deep

AF1825-3001 Chrome
AF1826-3001 Black

Suits GM TH350 (deep with plug) 76mm (3’’) deep

AF1825-3003 Chrome
AF1826-3003 Black

aeroflowperformance.com 283
 TRANSMISSION PANS

ALUMINIUM TRANSMISSION PANS

Aeroflow’s transmission pans use a one piece billet 9.52mm (3/8”) thick rail
for precise fitment and strength. The deep fabricated aluminium design allows
you to carry more oil to help reduce unwanted gearbox temperatures. Aeroflow
pans come with dual fittings, 1x -6 ORB and 1 x 3/8NPT for optional tempera-
ture gauge. Pans come with filter extensions and serrated flange bolts where
applicable.

Suits GM TH350 with drain plug 76mm (3’’) deep

AF72-3003 Natural
AF72-3003BLK Black

AF72-3000BLK AF72-3000

AF59-3000BLK

Suits Ford C4 (pan & case fill) 76mm (3’’) deep

AF72-3000 Natural
AF72-3000BLK Black
AF59-3000BLK Replacement Ford C4 pan fill adapter (black only)

Suits Chrysler 727 Torqueflite 58.7mm (2-5/16’’) deep

AF72-3004 Natural
AF72-3004BLK Black
TRANSMISSION & DRIVELINE

Suits GM TH400 with drain plug 76mm (3’’) deep

AF72-3001 Natural Suits GMH Trimatic 82.55mm (3-1/4”) deep)
AF72-3001BLK Black AF72-3005 Natural
AF72-3005BLK Black

Suits GM Powerglide with drain plug 76mm (3’’) deep Suits GM 4L60 / 4L60E 76mm (3-1/2’’) deep

AF72-3002 Natural AF72-3007 Natural

AF72-3002BLK Black AF72-3007BLK Black

284 aeroflowperformance.com
 TRANSMISSION ACCESSORIES

KICKDOWN CABLES
These Aeroflow Performance kickdown cable kits are 308 stainless steel
braided covering over a hard wearing high quality PTFE liner, which are made
Suits GM 6L80E 82.5mm (3-1/4’’) deep with an extruded liner for extended life .These kickdown kits feature alumini-
um fittings and ferrules to eliminate frayed ends. They contain all necessary
AF72-3008 Natural hardware for a complete installation depending on your application.
AF72-3008BLK Black
Part No Description - To Suit Colour
AF72-7000 GM TH700 and early 4L60E Chrome
AF72-7000BLK GM TH700 and early 4L60E Black
AF72-7001 Ford C6 Chrome
AF72-7001BLK Ford C6 Black
AF72-7002 GM Powerglide Chrome
AF72-7002BLK GM Powerglide Black
AF72-7003 Ford C4 Chrome
AF72-3550 AF72-3551 AF72-7003BLK Ford C4 Black
AF72-7004 GM TH400 Chrome
AF72-7004BLK GM TH400 Black
AF72-7005 Ford AOD Chrome
AF72-7005BLK Ford AOD Black
AF72-7006 Torqueflight 904 Chrome
AF72-7006BLK Torqueflight 904 Black

TRANSMISSION & DRIVELINE

AF72-7007 GM TH350 Chrome
AF72-7007BLK GM TH350 Black
AF72-7008 Torqueflight 727 Chrome
AF72-7008BLK Torqueflight 727 Black

AF72-3552 AF72-3554

AF72-3553
AF72-3559

TRANSMISSION PAN GASKETS

Aeroflow pan gaskets are manufactured from durable rubber that is
vulcanized to a ridge steel frame. These gaskets are reusable and require
no sealant so you can remove and install the transmission pan with ease.
The extra-strength design will not leak, blow out or get sucked in like stock or
inferior-quality aftermarket gaskets. 4.76mm (3/16”) thick.

Part No Description
AF72-3550 Ford C4 transmission pan
AF72-3551 GM TH400 transmission pan
AF72-3552 GM Poweglide transmission pan
AF72-3553 GM TH350 transmission pan
AF72-3554 Chrysler Torqueflite 727 transmission pan
AF72-3559 Ford C6 transmission pan
aeroflowperformance.com 285
 TRANSMISSION ACCESSORIES

TRANS COOLER FITTINGS CHART AF64-2119

Suit Transmission In Out

Powerglide - OEM Upper 1/8" NPT Lower 1/8" NPT

Powerglide - Dedenbear Upper 1/4"NPT Lower 1/4" NPT
TH200C Metric, 200-4R Lower 1/4" NPT Upper 1/4" NPT AF64-2118
Early TH250, TH350 Upper 1/4" NPT Lower 1/4" NPT
Late TH350, TH400 Upper 1/4" NPSM Lower 1/4" NPSM
700-4R, 4L60, 4L60E Upper 1/4" NPSM Lower 1/4" NPSM
4L80E 1991-96 Upper 1/4" NPT Lower 1/4" NPT AF64-2117
4L80E, 4L85E 1997-ON Rear 1/4" NPSM Front 1/4" NPSM
4L80E, 4L85E 1997-ON
6L80E
9/16” -18 NPSM
O-ring seal
9/16” -18 NPSM
O-ring seal GM TRANSMISSION & OIL COOLER
AOD
AODE, 4R70W
Lower 1/4" NPT
Upper 1/4" NPT
Upper 1/4" NPT
Lower 1/4" NPT
ADAPTER FITTINGS
E4OD, 4R100 Upper 1/4" NPT Lower 1/4" NPT
Torqueflite - All Rear 1/8" NPT Front 1/8" NPT Part No Description Pack of
Trimatic Rear 1/8” NPT Front 1/8” NPT
AF64-2117 VE & VF trans cooler radiator adaptor male to -6AN (x2)
Jatco 3 speed Rear M12 x 1.5 Front M12 x 1.5
AF64-2119 VE & VF trans cooler radiator adaptor female to -6AN (x2)
Jatco 4 speed Rear M14 x 1.5 Front M14 x 1.5
AF64-2118 VE & VF trans cooler adaptor suits 6 speed 6L80E (x1)
Ford ZF 6HP26 Push in with o-ring Push in with o-ring
Ford 6R Push in with o-ring Push in with o-ring
Ford C6, C10 Upper 1/8” NPSM Lower 1/8” NPSM
Ford C4 Pan Fill Upper 1/8” NPSM Lower 1/8” NPSM
Ford C4 Case Fill Upper 1/4” NPT Lower 1/4” NPT

Note: - NPT = tapered thread

Note: - NPSM = straight thread
Please check OEM fittings for compatibility
AF385-06
AF385-06L

GM 4L80E TRANSMISSION OIL

COOLER ADAPTER FITTINGS
TRANSMISSION & DRIVELINE

Part No Description to suit

AF385-06 1/4”-18 NPSM SHORT to -6AN designed to suit 4L80E
transmissions without tail on fitting (remove original
fittings to check what style you require)

GM TH350 & TH 400TRANS AF385-06L 1/4”-18 NPSM LONG TAIL to -6AN designed to suit
4L80E transmissions with long tail on fitting (remove
COOLER ADAPTERS (2 per pack) original fittings to check what style you require)
AF386-06 9/16”-18 NPSM SHORT to -6AN designed to suit 4L80E
Part No Description transmissions without tail on fitting (remove original
AF375-06BLK 1/4” NPSM straight thread to -6AN washers included fittings to check what style you require)
AF375-08BLK 1/4” NPSM straight thread to -8AN washers included AF386-06L 9/16”-18 NPSM LONG to -6AN designed to suit 4L80E
AF59-3750 Replacement copper washers ( 2 pack ) transmissions with long tail on fitting (remove original
Note Suits LATE TH350, TH400 with washer seal. fittings to check what style you require)

AF362-04
TRANSMISSION AF363-04
OIL COOLER
CLUTCH ADAPTERS
ADAPTER FITTINGS
This adapter is used on the clutch master cylinder, clutch slave cylinder, or
TO SUIT FORD AF72-5050
hydraulic clutch release bearing, and adapts to a standard -4AN. This adapter
allows the use of a PTFE lined stainless steel clutch hose to be used instead
(2 per pack)
of the factory OEM plastic clutch hose. Great for engine swaps, and the high
These handy adapters have been tested pressure PTFE lined hose holds up better in high heat.
on Ford Falcon, Mustang, F150 and
Territory and may fit other models like Part No Description Pack of
BMW, Jaguar and Rover fitted with the
ZF & 6R transmissions. These 1 piece full AF362-04 Suits late model Ford, GM & Chrysler (x1)
flow adapters allow an easy installation AF363-04 Suits early GM, Jeep, Mopar & Chrysler (x1)
of a remote transmission oil cooler that
is required when engine performance
has been upgraded or increased load
from things like towing. Designed with 15mm 19/32”
AF72-5051 9mm
-8AN ends to allow for different plumbing
combinations with the ability to swivel to
VE-VF CLUTCH 23/64”
your desired angle. Supplied with Viton ADAPTER
O-Rings.
Fits most late model vehicles including
VE-VF (GM). Mustang & Porsche AF64-2116
Part No Description - To Suit
AF72-5050 Ford ZF 6HP26 trans port fittings. 16.4mm barb size Part No Description Pack of
AF72-5051 Ford 6R trans port fittings. 18.85mm barb size
AF64-2116 Clutch master cylinder -4AN adapter (x1)

286 aeroflowperformance.com
 TRANSMISSION ACCESSORIES

FLOW CONTROL VALVE

Aeroflow Performance flow control valve plays a vital role in clutch tuning by
adjusting the clutch to slip slightly during quick engagements, the flow control
valve reduces shock loads to the driveline, lowers the chance of losing
traction or the chance of damaging driveline components. Includes three
FLEXPLATES
orifice sizes (0.021″, 0.028″ and 0.040″) that enable clutch disengagement Aeroflow’s heavy duty flexplates are manufactured with extra thick
to be tuned. The flow control valve features -3AN male nipples. material and double welded. These flexplates will withstand the extreme
power and RPM of today’s engines. Available to suit Chev, GM LS, Ford
and Holden.
Part No Description
AF64-4362 Flow control valve Part No Description
To Suit GM LS CHEVY Conversion flexplate to TH400 & TH350 trans
AF89-350-TH 168 Tooth - NEUTRAL / INTERNAL BAL

To Suit S/B CHEVY

AF89-305 153 Tooth - NEUTRAL / INTERNAL BAL
AF89-350 168 Tooth - NEUTRAL / INTERNAL BAL
AF89 -350L 168 Tooth - EXTERNAL BAL - 1- piece rear seal
AF89-350L-153 153 Tooth - EXTERNAL BAL - 1- piece rear seal
AF89-400 168 Tooth - EXTERNAL BAL

TRANSMISSION & DRIVELINE

To Suit B/B CHEVY
AF89-454 168 Tooth - EXTERNAL BAL
AF89-454L 168 Tooth - 1- piece rear seal

To Suit B/B FORD

AF89-460 164 Tooth - EXTERNAL BAL
AF89-460A 164 Tooth - NEUTRAL / INTERNAL BAL
SANDWICH PLATE TO SUIT To Suit S/B FORD WINDSOR & CLEVELAND
FORD WINDSOR 289 / 351, AF89-302E 164 Tooth - 28.2oz / EXTERNAL balance
11.5” Converter Bolt Circle
351 CLEVELAND AF89-302L 164 Tooth - 50.5oz / EXTERNAL balance
Starter block (sandwich) plate for 289-351 Windsor and 351 Cleveland 11.5” Converter Bolt Circle
engines with automatic transmission. Will suit 157 or 164 teeth, this plate AF89-302N 164 Tooth - NEUTRAL / INTERNAL balance
will ensure the correct torque convertor back spacing & alignment of your 11.5” Converter Bolt Circle
flexplate. AF89-302-157 157 Tooth - 28.2oz / EXTERNAL balance
for Stroker - 10.5” Convertor bolt Circle
AF89-302-157-50 157 Tooth - 50.5 oz / EXTERNAL balance
Part No Material Description - To Suit Replacement - 10.5” Converter bolt Circle
This flex plate mates EFI 302 to C4 trans
AF72-2120 Steel Suits 289-351 Windsor & 351 Cleveland
Suit 157 & 164 tooth drive plate
To Suit HOLDEN (GM Australia)
AF89-308 153 Tooth - INTERNAL BAL 253-304-308

FLEXPLATE INSPECTION COVERS

These Aeroflow bellhousing inspection covers keep road debris out of your
bellhousing! These strong steel plates help prevent mud, rocks, water and the
like from getting in there and causing mayhem. Aeroflow’s inspection covers
are available in two great finishes; chrome plated and black electrolysis.
NOTE: DOES NOT Suit Holden V8

Part No Colour Description - To Suit

SUITS GM LS CHEVY
AF1827-3002 Chrome GM Powerglide Conversion flexplate to TH400 & TH350 trans
AF1828-3002 Black GM Powerglide 168 Tooth - Neutral / Internal Balance includes adapter ring.
AF1827-3003 Chrome GM TH350, TH400 AF89-350-TH
AF1828-3003 Black GM TH350, TH400
AF1827-3006 Chrome GM TH700 Adapter ring also sold seperately AF72-5053
AF1828-3006 Black GM TH700
aeroflowperformance.com 287
 TRANSMISSION ACCESSORIES

AF88-350SFI
AF88-350-THSFI

BILLET SFI FLEXPLATES AF88-302NSFI

The Aeroflow Performance billet flexplates are the superior choice for
quality and precision. The lightweight 1 piece design is stronger and
more durable than any 2-piece style of flex plate. Machined from 4340
round bar with precise tolerances. With a chamfered gear teeth for better
engagement with the least amount of runout to provide the best longevity
on the market. All of our billet flexplates are certified to SFI 29.2 and
available for many different models. CNC machined from 4340 round bar
and heat treated to HRC45-55.
TRANSMISSION & DRIVELINE

Part No Description
To Suit GM HOLDEN V8 Suits TH400 & TH350 trans
AF88-308SFI 153 Tooth - NEUTRAL / INTERNAL BAL AF88-499SFI

To Suit GM LS CHEVY Conversion flexplate to TH400 & TH350 trans

AF88-350-THSFI 168 Tooth - NEUTRAL / INTERNAL BAL

To Suit S/B & B/B CHEVY

AF88-350SFI 168 Tooth - NEUTRAL / INTERNAL BAL

To Suit S/B FORD WINDSOR & CLEVELAND

AF88-302NSFI 164 Tooth - NEUTRAL / INTERNAL balance
11.5” Converter Bolt Circle

TO SUIT FORD XR6 BA/BF/FG

AF88-499SFI NEUTRAL balance 160 tooth. suits ZF & TH400
Note: 10mm longer flex plate bolts required.
AF88-500SFI
TO SUIT NISSAN / HOLDEN RB30
AF88-499SFI NEUTRAL balance 120 tooth. suits JATCO

288 aeroflowperformance.com
 TRANSMISSION ACCESSORIES

GM TH400 TRANSMISSION YOKE

These 32 and 1 master spline hardened steel slip yokes are designed to work
with TH-400 GM automatic transmissions with a 32-spline output shaft. This
SFI FLEXPLATES Yoke accepts 1310 U-joints. Overall Length: 6.250 inches ( 158.75mm ), 5.5”
( 139.70mm ) from the U-joint centre to the end of the yoke. Shaft Length is
Aeroflow Performance SFI rated heavy duty flexplates are manufactured 3.75” ( 95.25mm ) and Shaft Diameter is 1.88” ( 47.75mm ).
with extra thick material and double welded. These flexplates will
withstand the extreme power and RPM of today’s engines. Available to
suit Chev, GM LS, Ford and Holden.
Part No Description
AF5074-1001 GM TH400 transmission yoke.
Part No Description
To Suit GM LS CHEVY Conversion flexplate to TH400 & TH350 trans
AF89-350-THSFI 168 Tooth - NEUTRAL / INTERNAL BAL

To Suit S/B CHEVY

AF89-305SFI 153 Tooth - NEUTRAL / INTERNAL BAL
AF89-350SFI 168 Tooth - NEUTRAL / INTERNAL BAL
AF89 -350LSFI 168 Tooth - EXTERNAL BAL - 1- piece rear seal
AF89-350L-153SFI 153 Tooth - EXTERNAL BAL - 1- piece rear seal
AF89-400SFI 168 Tooth - EXTERNAL BAL

To Suit B/B CHEVY

TRANSMISSION & DRIVELINE

AF89-454SFI 168 Tooth - EXTERNAL BAL
AF89-454LSFI 168 Tooth - 1- piece rear seal

To Suit B/B FORD

AF89-460SFI 164 Tooth - EXTERNAL BAL GM 27 SPLINE TRANSMISSION YOKE
AF89-460ASFI 164 Tooth - NEUTRAL / INTERNAL BAL
This GM transmission 27 spline yoke are designed to work with late pow-
erglide, Turbo 350, 700R4, 4L60, 4L65, 4L70 as well as Borg Warner T-5,
To Suit S/B FORD WINDSOR & CLEVELAND
T-10 & T-56 27-spline manual transmissions. This slip yoke measures 6.75”
AF89-302ESFI 164 Tooth - 28.2oz / EXTERNAL balance
( 171.45mm ) from the centreline of the u-joint to the front edge and length of
11.5” Converter Bolt Circle
machined part of yoke is 4.75” ( 120.65mm ). These longer slip yokes help
AF89-302LSFI 164 Tooth - 50.5oz / EXTERNAL balance
compensate for extreme travel rear suspension set-ups or drive shaft lengths
11.5” Converter Bolt Circle
slightly shorter than needed. Yoke is grooved for external u-joint cap retaining
AF89-302NSFI 164 Tooth - NEUTRAL / INTERNAL balance
clips. Works with 1310 series U-joints.
11.5” Converter Bolt Circle
AF89-302-157SFI 157 Tooth - 28.2oz / EXTERNAL balance
for Stroker - 10.5” Convertor bolt Circle Part No Description
AF89-302-157-50SFI 157 Tooth - 50.5 oz / EXTERNAL balance
Replacement - 10.5” Converter bolt Circle AF5074-1002 GM 27 spline transmission yoke.
This flex plate mates EFI 302 to C4 trans

To Suit HOLDEN (GM Australia)

AF89-308SFI 153 Tooth - INTERNAL BAL 253-304-308

FORD C4 TRANSMISSION YOKE

This Ford C4 transmission slip yoke is designed only for Ford C4 transmis-
sions with 28 splines. It measures 6.5” ( 165.10mm) from the centre of the
ENGINE MOUNT ADAPTERS U-joint cup to the front end of the yoke. Accepts 1310 style U-joints and an
overall length of 7.50” ( 190.50mm ). The Shaft Length is 5.00” ( 127mm ) and
Black powder coated steel. Shaft Diameter is 1.5” ( 38.10mm ).

Part No Description
Part No Description
AF5074-1003 Ford C4 transmission yoke.
AF64-3050 Chev engine mount adapters to suit HQ-WB, LH-LX for
use with Holden (GM Australia) mounts.

aeroflowperformance.com 289
 DRIVELINE ACCESSORIES

C
2 x retaining
B clips included

UNIVERSAL JOINT GIRDLE

Purpose designed to provide more bearing surface for the
FORD 9” 1310 UNIVERSAL JOINT universal joint bearing cap. Manufactured from 7075-T6 aluminium
and anodised finish complete with all mounting hardware.
Aeroflow Performance high quality, heat treated forged steel replacement 1350 Universal cap 30mm (1-3/16”)
1310 U-joint. Comes with outside retaining clips and can be greased. 1330 Universal cap 28mm (1-7/64”)
Cap Diameter A: 1.062” ( 26.97 mm )
Cap Diameter B: 1.062” ( 26.97 mm ) Part No Colour Description
Width C: 3.219” ( 81.76 mm )
Width D: 3.219”( 81.76 mm ) AF72-1010 Black. Suit 1350
AF72-1011 Blue. Suit 1330
Part No Description
AF5074-1004 1310 Series Universal joint
DRIVELINE

UNIVERSAL JOINT U-BOLTS

Aeroflow Performance driveshaft U-bolts are forged steel for 50% more FORD 9” DIFF YOKES
strength than standard units. Fits U-joints with 1-1/8” diameter caps or U- Ford 9” diff yoke with dust cover to suit 1310 universal joints. Fits standard
joints with 1-1/16” caps. Both have a 5/16”-18 thread with nuts and washers 28 spline pinion gear. Overall length is 4” ( 101.60mm ). Centre to centre
included. of U-bolt holes is 1.415” ( 35.94mm ). Thickness of ear where U-bolts go
1005 = 1/16” cap =Centre to centre of threaded ends is 35mm (1-3/8”) through is 0.818” ( 20.77mm ). Space between ears where u-joint caps fit is
1006= 1/18” cap = Centre to centre of threaded ends is 39mm (1-17/32”) 3.211” ( 81.55mm ). Outside diameter at seal area is 1.813” ( 46.05mm ).

Part No Description Part No Description

AF5074-1005 1/16” cap Centre to centre of threaded ends is 1-3/8” AF5074-1000 Ford 9” differential yoke.
AF5074-1006 1/18” cap Centre to centre of threaded ends is 1-17/32”

290 aeroflowperformance.com
 DIFFERENTIAL ACCESSORIES

HEAVY DUTY TAIL SHAFT LOOP

Safety loop helps contain the driveshaft and prevents flipping of the vehicle in
the event of a front U-joint failure. FORD 9” ALLOY PINION SUPPORT
• Bolt together design allows for easy installation. The Aeroflow Performance Ford 9” CNC forged aluminium Daytona style
• Meets both ANDRA and CAMS requirements. pinion support is a great upgrade from the cast iron models. This pinion
• Material thickness 6.35mm (1/4”). Approx feet Width 50.8mm (2”) support uses a standard Ford 9” front pinion bearing and the Daytona
Total mount width 660mm (25-63/64”) style pinion bearing on the rear. All bearings and races are sold separately
(AF5075-1002 ). *Recommend to use Pinion Nut AF5075-1003.
Part No Finish
AF72-1005 Zinc silver plated
Part No Description
AF72-1006 Black oxide coated finish AF5075-1001 9” Daytona style forged aluminium pinion support

FORD 9” PINION SEAL

This Aeroflow Performance viton 9” Ford pinion seal are good to over 200oC
(392oF). The stock rubber seal starts to deteriorate at about 120oC (248oF)
making this a great upgrade when building a diff. Outside Diameter is 3” (
76.20mm ). Inside Diameter is 1.813” ( 46.05mm ). Overall Thickness is 0.5”
( 12.70 mm ).

Part No Description

DRIVELINE
AF5075-1008 Ford 9” pinion seal

FORD 9” PINION BEARING KIT

The Aeroflow Performance Ford 9” Daytona pinion bearing install kit is
designed to be used in conjunction with the Daytona Pinion Support
AF5075-1000 or AF5075-1001. The kit includes the following components FORD 9” PINION
Front Pinion Bearing Race, Pinion Tapper Roller Bearing, Daytona Rear
Pinion Race, Daytona Rear Pinion Bearing, Viton Pinion Seal, Solid Pinion
PILOT BEARING
Long Spacer and Pinion Nut. RETAINER CLIP RING
Part No Description Retains the small pinion gear snout bearing.

AF5075-1002 9” Daytona pinion bearing kit Part No Description

AF5075-1007 Ford 9” pinion pilot bearing retainer clip ring.

FORD 9” CAST IRON PINION SUPPORT

The Aeroflow Performance Ford 9” cast iron Daytona style pinion support is
FORD 9” PINION NUT
far superior to the original Ford design. It features a larger inner bearing and This Ford 9” pinion nut is specifically designed to be used with Daytona
race with improvements in oil flow. This allows for use in higher torque or pinion supports due to its thinner design. It should be used in conjunction with
horsepower applications, while also increasing bearing life. All bearings and AF5075-1001 and AF5075-1000 Daytona style pinon supports.
races are sold separately ( AF5075-1002 ). *Recommend to use Pinion Nut
AF5075-1003 Part No Description
AF5075-1003 Ford 9” pinion nut
Part No Description
AF5075-1000 9” Daytona style pinion support

aeroflowperformance.com 291
 DIFFERENTIAL ACCESSORIES

FORD 9” POWERTRAX
The Aeroflow Powertrax assembly is the latest design in traction control.
Utilising 3 x 2 spiral gear technology for smooth, dependable operation that
combines limited-slip characteristics from gears contained in a machined,
forged steel centre housing. The Powertrax delivers progressive & variable
traction releasing tension on the centre to turn corners while locking up to put
the power down through both wheels in a straight line.

Part No Description
Finish
AF5076-1005 28 spline Ford 9” powertrax 1.781” side carrier bearings
FORD 9” PINION SHIM KIT AF5076-1006 31 spline Ford 9” powertrax
The Aeroflow Performance Ford 9” pinion shim kit consists of seven pinion
retainer shims including one of each .004”, .005”, .006”, .013”, .016” and two
.010”. Eight pinion pre-load shims consisting of one each .003”, .004”, .005”,
.012”, .020”, .020”, and three .010”. One inner and one outer pinion spacer
and one 3/4”-20 Ford pinion nut.

Part No Description
AF5075-1004 9” pinion shim kit

AF5076-1007
DRIVELINE

FORD 9” CRUSH SLEEVE AF5076-1008

This stock replacement crush collar/sleeve for Ford 9” rear axles from
Aeroflow Performance is a collapsible spacer that installs on the pinion and
preloads the pinion bearings. This crush sleeves is not reusable and must be FORD 9” FULL SPOOLS
replaced if the pinion nut is loosened or removed. Overall Diameter is 1.630”
The Aeroflow Performance Ford 9” full spool is available in the light weight
( 41.40mm ). Inside Diameter is 1.350” ( 34.30mm ). Overall Thickness is
steel with 28 or 31 splines. These lightweight steel spool weighs 6.2 lbs.
0.500” ( 12.70mm ).
(2.81kg) (28 Spline) & 6.1 lbs.(2.76kg) (31 Spline). NOTE All Ford 9” full
spools use overhaul kit AF5076-1003, even if they are a 28-spline spool. This
Part No Description contains the larger I.D. standard O.D. carrier bearings and pinion bearings
needed for use with the full spools.
AF5075-1006 Ford 9” crush sleeve
Part No Description
Finish
AF5076-1007 28 spline Ford 9” full spool
AF5076-1008 31 spline Ford 9” full spool
AF5076-1009 35 spline Ford 9” full spool

292 aeroflowperformance.com
 DIFFERENTIAL ACCESSORIES

FORD 9” RING GEAR BOLTS

The Aeroflow Performance Ford 9” ring gear bolt sets are constructed from
durable steel and featured in a black oxide finish. Hex wrench type with a
thread pitch of 7/16”-20. We recommend to torque these to 70ft/lb ( 94 Nm ).
They come in three different lengths as listed below.

Part No Description
AF5075-1011 25.4mm (1”) UHL pack of 10 FORD 9” NODULAR IRON CASES
AF5075-1010 30.7mm (1-7/32”) UHL pack of 10
AF5075-1012 31.5mm (1-1/4”) UHL pack of 10 Aeroflow Performance brand new, cast iron case is built to take the abuse of
the street, strip or track without the fear of breaking. Case has forged caps
and extra reinforcement where it’s needed most.
Most stock differentials use the 3.062” O.D. bearings with 1.781” I.D.
AF5076-1000 has forged 3.062” diameter bearing caps. Accepts OEM and
aftermarket Ford 9” pinion supports and fits a 28 or 31 spline.
AF5076-1001 has forged 3.250” diameter steel bearing caps. Upgraded 5/8”
Heavy Duty Cap Bolts which are a grade 8 material. This case ONLY works
with 35 and 40 spline spools and will not fit a 28 or 31 spline spool.

Part No Description
AF5076-1000 3.062” diameter caps, 28 or 31 spline ONLY
AF5076-1001 3.250” diameter caps, 35 and 40 spline ONLY

9” FORD REAR
END AXLE

DRIVELINE
HOUSING
GASKET
This reusable rear differential
FORD 9” OVERHAUL KITS gasket has a non-stick coating.
Fits 9” Ford rear axle housings.
The Aeroflow Performance Ford 9” overhaul kit is the only kit required to
completely overhaul your Ford 9” differential. It includes pinion pilot, pinion
shaft, pinion nut, pinion seal, gasket, shims, crush collar, sealant, and gear
marking grease, brush and Loctite. Ring gear bolts not included. Both the Part No Description
28 spline and the 31 spline come with the carrier bearing. The 35 spline kit
comes with Carrier bearing, Outer pinion bearing and Large “Daytona” inner AF5075-1009 9” Ford rear axle housing gasket SINGLE
pinion bearing AF5075-1009-10 9” Ford rear axle housing gasket PACK OF 10
NOTE : Aeroflow 9” full spools use overhaul kit AF5076-1003, even if they are
a 28-spline spool. This contains the larger I.D. standard O.D. carrier bearings
and pinion bearings needed for use with the full spools.

Part No Description
AF5076-1002 suits 2.891” case with 28 or 31 spline axles
AF5076-1003 suits 3.062” case with 28 or 31 spline axles
AF5076-1004 suits 3.250” case with 35 spline axles

aeroflowperformance.com 293
 DIFFERENTIAL ACCESSORIES

Weld on diff filler

on page 392

AXLE HOUSING T-BOLTS

Ford 9” T-bolt rear end bolt kit has everything you need to mount brake back-
ing plates to your Ford 9” housing. They are made from high strength steel
with a thread size of 3/8”-24 and overall length of 1.50” ( 38.10mm ). Included
is 8 T-bolts and matching lock nuts to suit.

Part No Description
AF5072-1000 Axle Housing T bolts (Pack of 8 T-bolts & nuts)

FORD 9” DIFF HOUSING

Aeroflow’s Ford 9” housing is designed to be the ultimate in versatility for
car builders. It’s low-profile design is 11 1/4” (285.75mm) tall, 23” (584.2mm)
wide, and weighs 21.6 lbs. / (11.81kg) and features a traditional style back
cover. Additional features included a CNC machined housing flange for added
strength that is notched for large diameter ring gears. The housing
accommodates 3” axle tubes with over 4” of tube engagement, and rosette
weld holes for strength. Centre studs are included and installed ready to go.
DIFF CENTRE HOUSING STUDS
Ford 9” rear end centre carrier studs are manufactured from high strength
Part No Description
steel with a thread size of 3/8”-24 and overall length of 1.75” ( 44.45mm ). A AF5078-1000 Ford 9” diff housing
knurl size of 0.403” ( 10.32 mm ) studs. This set includes 10 studs only, no
nuts/washers are included.

Part No Description
DRIVELINE

AF5073-1000 Carrier Studs (Pack of 10 studs ONLY)

DIFF BREATHER
Perfect for use as diff breather, atmosphere vent
and other applications where it is required to release
pressure.

Part No Description
AF5075-1005 1/8” NPT diff Breather

FORD 9” COMPETITION DIFF HOUSING

Aeroflow competition Ford 9” diff housings allow you to add all of the necessary
components for a high-strength rear-end. These housings are made from a
DIFF BREATHER thicker gauge of steel than a stock housing, providing more strength and a
better base for welding brackets without housing distortion. With a traditional
Breathers are finished in zinc with style notch back cover and reinforced with a CNC machined housing flange
sintered bronze aeration. Perfect for use that will allow you to weld the axle tubes on the inside and outside for
as diff breather, atmosphere vent and additional strength to reduce axle tube flex. The housings accepts either a
other applications. 76.3mm ( 3” ) or 82.55mm ( 3-1/4” ) axle tubes with over 101.6mm ( 4” ) of tube
engagement. Centre studs are included and installed ready to go.
Dimensions :
Thread Part No Description Tall – 287mm ( 11-19/64” )
Width – 584mm (23”)
1/8” NPT AF462-02 Diff Breather Weight – 11.52kg ( 25.4lbs )
7/16” UNF AF462-04 Diff Breather
Part No Description
AF5078-1005 Suits 76.2mm (3”) Tubes
AF5078-1006 Suits 83mm (3-1/4”) Tubes

294 aeroflowperformance.com
 DIFFERENTIAL ACCESSORIES

SOLD AS ONE AXLE ONLY

with fitting kit

FORD 9” UNIVERSAL AXLE TUBES

These Aeroflow Ford 9” axle tubes are 76mm (3”) in diameter with a thick
4.77mm (0.188” )wall. They have a total length of 53.5cm (21”).
They are sold as a pair.

Part No Description FORD 9” CUT TO FIT AXLE KIT

AF5078-1001 Ford 9” universal axle tubes The Aeroflow Performance Ford 9” cut to fit axles are perfect for entry level
users and will allow you to build your own custom width rear end easily. They
are a induction heat treated forged 4140 steel construction axle with a natural
finish and are SOLD AS ONE AXLE only. Axle length is measured from the
flange to the end of the splines. The 28 Spline option axles are drilled for 5
studs with a 4.5” wheel bolt pattern. While the 31 Spline options are drilled for
5 studs with 4.5” and 4.75” wheel bolt patterns. All axles use a 0.685” knurl
diameter for wheel studs which are included in this kit. The 28 Spline axles
require the use of a Ford small bearing end on it which measures 3.375” with
a 2.5” offset. The Larger 31 Spline requires the use of the big Ford New style
bearings which measures 3.562” with a 2.5” offset. The center of the axle
flange (hub pilot) measures 3.055”. The O.D. of axle flange measures 6.158”.
They are available in 28 Spline with lengths of 28” (711.20mm) and 32”
(812.80mm) with a spline length of 4” (101.6mm). The 31 Spline comes
in lengths of 26” (660.40mm) , 29” (736.90mm), 32” (812.80mm) and 35”
(889mm) with a spline length of 4” (101.6mm). It is recommended to have at
least 1” (25.4mm) of spline engagement on all axles.
Each axle kit contains the following :
1 x Cut to Fit Axle

DRIVELINE
5 x 7/16” wheel studs
5 x 1/2” wheel studs
1 x Axle retaining plate
1 x Axle bearing kit
1 x Axle bearing collar.

AF5078-1003 AF5078-1002 AF5078-1004 Part No Finish

AF5079-1000 28 spline, 28” total length, 4” spline length
FORD 9” BILLET AXLE TUBE ENDS AF5079-1001 28 spline, 32” total length, 4” spline length
AF5079-1002 31 spline, 26” total length, 4” spline length
Aeroflow offers a range of billet steel Ford 9” axle tube ends to configure your
AF5079-1003 31 spline, 29” total length, 4” spline length
diff housing to one of three bearing options. Stepped to seat into the end of
AF5079-1004 31 spline, 32” total length, 4” spline length
Aeroflow’s axle tubes, they weld on to finsh off your heavy duty diff housing.
AF5079-1005 31 spline, 35” total length, 4” spline length
Sold as pairs.

Part No Description
AF5078-1002 Late big Ford bearings
AF5078-1003 Early big Ford bearings
AF5078-1004 Small Ford bearings

AF5071-1000 AF5071-1001
Knurl size
WHEEL STUDS diameter

Aeroflow Performance wheel studs are made from a high strength steel. Its
press-in design makes it stronger than stock. They are available in both 7/16”
REAR AXLE SPRING PERCHES thread and 1/2” thread. They are come in packs of 5 per package. The knurl
size is 15.49mm (39/64”) to suit 15.06mm (19/32”) stud holes. The thread
Aeroflow’s rear housing mounts are ideal for installing a new rear-end Length is 25.4mm (1” ), UHL is 38mm (1.5” ).
housing or relocating rear springs. Precision stamped for easy weld-on
installation. They provide a strong spring mount, made from 5mm (3/16”)
thick mild steel, they fit 76mm (3”) diameter axle tubes and are 63mm Part No Finish
(2 -1/2”) wide. Sold as pairs. AF5071-1000 7/16” wheel studs (Pack of 5 studs)
AF5071-1001 1/2” wheel studs (Pack of 5 studs)
Part No Description
AF72-1500 Rear axle spring perches.

aeroflowperformance.com 295
 TURBOS

BOOSTED TURBOCHARGERS by AEROFLOW

Aeroflow Performance Boosted turbochargers are designed specifically for the enthusiast who wants optimal performance at a competitive price. Boosted
Turbochargers have a range of specific turbos to meet your power goals, driving style and budget. Boosted turbocharger’s utilise billet compressor wheels and
feature the latest aerodynamic design that maximises horsepower and boost response throughout the rev range. The turbine wheel is constructed from Inconel, a
Super Alloy that maintains strength during prolonged exposure to extremely high exhaust gas temperatures.
Boosted Turbocharger’s are available in 360deg journal bearing, dual and triple ceramic ball bearing cartridges designed to prolong the turbo lifespan and improve
shaft balance. Boosted Turbocharger’s are also available in oil/water or oil cooled versions to help keep temperatures to a minimum. The boosted range of turbos
are available with a ported shroud compressor cover housing which increases surge resistance and provides reliable, continuous power throughout the engine’s
RPM. Boosted turbochargers are available for a direct bolt-on for some Ford’s and Nissan’s with further models in development. Boosted turbos are available in
natural aluminium or high temp black compressor cover options.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

Compressor Wheel Turbine Wheel

Exducer

Inducer
Inducer
Exducer

FRESH AIR

Warranty Disclaimer
Boosted by Aeroflow products are manufactured to industry standard specifications from quality materials. Utmost care is taken to ensure products are free from
blemishes, inconsistencies and defects. Aeroflow products carry a one year warranty from the date of purchase however warranty will be void if the product is
not used in the correct way for which it was intended. Boosted Turbochargers and replacement parts are designed for street use only. Products used in race
applications and/or products that have been modified, damaged, incorrectly installed or incorrectly/poorly maintained are not covered by this warranty. Proof of
purchase will be required for all warranty claims.
This Boosted ball bearing turbocharger from Aeroflow Performance does not feature an internal oil flow restrictor. A -4AN fitting is provided with a built in external
oil feed restrictor and must be used to ensure oil does not push past the seals and shorten the life span of the turbocharger. Should you choose not to use the
provided -4AN fitting then an external oil feed restrictor ( AF399-04 or AF399-03, available for purchase separately ) must be installed in the turbo oil feed line at
the engine side and turbo side of the line. Failure to use a suitable restrictor will void the warranty. Boosted turbochargers that feature water cooling ports must
have these ports connected to the water cooling system in order to cool the turbocharger core. Failure to connect any and all of these ports will void all warranties.
Boosted turbochargers that are 360o journal bearing must have -6AN oil feel lines installed to cool their core.

296 aeroflowperformance.com
 4628 TURBOS

BOOSTED 4628
Recommended horsepower rating: 200-475HP
Recommended engine displacement: 1.4L to 2.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting
with restrictor included in turbo kit. (Warranty VOID if not used)
T25 / T28 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
5 bolt turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting thread.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
M8 x 1.25mm 5 bolt turbine outlet flange.
Internal wastegate actuator with 8.7psi spring.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

46mm 60.1mm 62.24mm 0.60 53.9mm 47mm 0.64 or 0.86

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
3” Slip fit 2” Slip fit T25 / T28 5 Bolt Internal wastegate with 8.7PSI actuator

.64 Rear Housing .86 Rear Housing

Part No Description Part No Description
AF8005-2000 Natural Cast AF8005-2001 Natural Cast
AF8005-2000BLK Hi Temp Black AF8005-2001BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0001 Turbine inlet gasket (single layer)
AF9557-1001 Turbine inlet gasket (multi-layer gasket)
AF463-01 or AF463-05 turbo drain adapter (-10ORB or -10AN)
AF732-06 M14x1.5mm coolant fittings
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor AF8050-1021
AF8059-0001 Turbo drain gasket
AF9557-1011 5 bolt turbine exhaust gasket multi-layer
AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange
AF9551-0001 Turbine inlet flange stainless steel (CNC machined)
AF8050-1021 Billet Actuator (14 PSI spring installed)
AF8059-2000 4628 CORE ONLY

aeroflowperformance.com 297
 4849 TURBOS

BOOSTED 4849
Recommended horsepower rating: 300 - 550HP
Recommended engine displacement: 1.4L to 3L

V-Band turbine inlet and outlet.

Dual ceramic ball bearing.
Point Milled compressor wheel.
Ported shroud compressor housing cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
1/8”NPT boost reference port.
SiMo-nodular cast iron rear housing.
4 x M14 x 1.5mm coolant fitting ports (Must install water lines on
opposite sides of the core).
7/16”-24 oil feed fitting with in-built restrictor.
(Warranty VOID if not used).
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
Internal wastegate option with 9PSI spring & 32mm hole size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

48mm 60mm 62mm 0.70 54mm 49mm 0.72

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
3” Slip fit 2” Slip fit V-Band (AF8080-1016) V-Band (AF8080-1000) Internal wastegate with 9PSI actuator
or external wastegate

.72 Rear Housing (EXTERNAL Wastegate)

.72 Rear Housing (INTERNAL Wastegate)
Part No Description
Part No Description
AF8005-2010 Natural Cast
AF8005-2010BLK Hi Temp Black AF8005-2013 Natural Cast
AF8005-2013BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF8080-1016 Turbine inlet V-band
AF8080-1000 Turbine outlet V-band
AF463-01 or AF463-05 turbo drain adapter (-10ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8059-0001 Turbo drain gasket
AF8059-2010 4849 CORE ONLY

298 aeroflowperformance.com
 4849 TURBOS

BOOSTED 4849 RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 300 - 550HP

Recommended engine displacement: 1.4L to 3L

V-Band turbine inlet and outlet.

Dual ceramic ball bearing.
Point Milled compressor wheel.
Ported shroud compressor housing cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
1/8”NPT boost reference port.
SiMo-nodular cast iron rear housing.
4 x M14 x 1.5mm coolant fitting ports (Must install water lines on
opposite sides of the core).
7/16”-24 oil feed fitting with in-built restrictor.
(Warranty VOID if not used).
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

48mm 60mm 62mm 0.70 54mm 49mm 0.72

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
3” Slip fit 2” Slip fit V-Band (AF8080-1016) V-Band (AF8080-1000) External wastegate

.72 Rear Housing (EXTERNAL Wastegate)

Part No Description
AF8005-2110 Natural Cast
AF8005-2110BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF8080-1016 Turbine inlet V-band
AF8080-1000 Turbine outlet V-band
AF463-01 or AF463-05 turbo drain adapter (-10ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8059-0001 Turbo drain gasket
AF8059-2110 4849 reverse rotation CORE ONLY
aeroflowperformance.com 299
 5449 TURBOS

BOOSTED 5449
Recommended horsepower rating: 350 - 660HP
Recommended engine displacement: 1.4L to 3L
V-Band turbine inlet and outlet.
Dual ceramic ball bearing.
Point Milled compressor wheel.
Ported shroud compressor housing cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
1/8”NPT boost reference port.
SiMo-nodular cast iron rear housing.
4 x M14 x 1.5mm coolant fitting ports (Must install water lines on
opposite sides of the core).
7/16”-24 oil feed fitting with in-built restrictor.
(Warranty VOID if not used).
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
Internal wastegate option with 9PSI spring & 32mm hole size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 67mm 74mm 0.70 54mm 49mm 0.72

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
3” Slip fit 2” Slip fit V-Band (AF8080-1016) V-Band (AF8080-1000) Internal wastegate with 9 PSI actuator
or external wastegate

.72 Rear Housing (EXTERNAL Wastegate) .72 Rear Housing (INTERNAL Wastegate)
Part No Description Part No Description
AF8005-2015 Natural Cast AF8005-2018 Natural Cast
AF8005-2015BLK Hi Temp Black AF8005-2018BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF8080-1016 Turbine inlet V-band
AF8080-1000 Turbine outlet V-band
AF463-01 or AF463-05 turbo drain adapter (-10ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8059-0001 Turbo drain gasket
AF8059-2015 5449 CORE ONLY

300 aeroflowperformance.com
 5449 TURBOS

BOOSTED 5449 RRT

This is a reverse rotation turbocharger for applications that want the

perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 350 - 660HP

Recommended engine displacement: 1.4L to 3L
V-Band turbine inlet and outlet.
Dual ceramic ball bearing.
Point Milled compressor wheel.
Ported shroud compressor housing cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
1/8”NPT boost reference port.
SiMo-nodular cast iron rear housing.
4 x M14 x 1.5mm coolant fitting ports (Must install water lines on
opposite sides of the core).
7/16”-24 oil feed fitting with in-built restrictor.
(Warranty VOID if not used).
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 67mm 74mm 0.70 54mm 49mm 0.72

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
3” Slip fit 2” Slip fit V-Band (AF8080-1016) V-Band (AF8080-1000) External wastegate

.72 Rear Housing (EXTERNAL Wastegate)

Part No Description
AF8005-2115 Natural Cast
AF8005-2115BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF8080-1016 Turbine inlet V-band
AF8080-1000 Turbine outlet V-band
AF463-01 or AF463-05 turbo drain adapter (-10ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8059-0001 Turbo drain gasket
AF8059-2115 5449 reverse rotation CORE ONLY
aeroflowperformance.com 301
 5428 TURBOS

BOOSTED 5428

Recommended horsepower rating: 275-495HP

Recommended engine displacement: 1.8L to 3L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting
with restrictor included in turbo kit. (Warranty VOID if not used)
T25 / T28 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
5 bolt turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting thread.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
M8 x 1.25mm 5 bolt turbine outlet flange.
Internal wastegate actuator with 8.7psi spring.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 71mm 73.79mm 0.60 53.9mm 47mm 0.64 or 0.86

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
3” Slip fit 2” Slip fit T25 / T28 5 Bolt Internal wastegate with 8.7PSI actuator

.64 Rear Housing .86 Rear Housing

Part No Description Part No Description
AF8005-2005 Natural Cast AF8005-2006 Natural Cast
AF8005-2005BLK Hi Temp Black AF8005-2006BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0001 Turbine inlet gasket (single layer)
od
T51R M
AF9557-1001 Turbine inlet gasket (multi-layer gasket)

for front
AF463-01 or AF463-05 turbo drain adapter (-10ORB or -10AN)

Availablesor cover
AF732-06 M14x1.5mm coolant fittings
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8059-0001 Turbo drain gasket
compres l Order
Specia
AF9557-1011 5 bolt turbine exhaust gasket multi-layer
AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange
AF9551-0001 Turbine inlet flange stainless steel (CNC machined)
AF8050-1021 Billet Actuator (14 PSI spring installed)
AF8059-2005 5428 CORE ONLY

302 aeroflowperformance.com
 5455 TURBOS

BOOSTED 5455
Recommended horsepower rating: 340-650HP
Recommended engine displacement: 1.8L to 3L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed
fitting with restrictor included in turbo kit. (Warranty VOID if not used)
T3 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 71mm 73.79mm 0.60 60mm 55mm 0.63 or 0.82 or 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit T3 V band (AF8080-1000) External wastegate sold separately

.63 Rear Housing .82 Rear Housing 1.06 Rear Housing

Part No Description Part No Description Part No Description
AF8005-3000 Natural Cast AF8005-3001 Natural Cast AF8005-3002 Natural Cast
AF8005-3000BLK Hi Temp Black AF8005-3001BLK Hi Temp Black AF8005-3002BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
Optional Rear Housings ( sold separately )
AF9557-0005 T3 inlet gasket Single-layer) Part No Description
AF9557-1002 T3 inlet gasket (Multi-layer)
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN) AF8050-1007 SiMo-nodular cast iron V-Band 0.83
AF732-06 M14x1.5mm coolant fitting AF8050-1008 SiMo-nodular cast iron V-Band 1.01
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8059-0001 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0002 Turbine inlet flange stainless steel
AF8059-3000 5455 CORE ONLY

aeroflowperformance.com 303
 5455 TURBOS

BOOSTED 5455 V-BAND

Recommended horsepower rating: 340-650HP
Recommended engine displacement: 1.8L to 3L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with
restrictor included in turbo kit. (Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 71mm 73.79mm 0.60 60mm 55mm 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit V-band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

.83 Rear Housing V-BAND 1.01 Rear Housing V-BAND

Part No Description Part No Description
AF8005-3031 Natural Cast AF8005-3032 Natural Cast
AF8005-3031BLK Hi Temp Black AF8005-3032BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
od
AF463-01 or AF463-05
AF732-06
Turbo drain adapter (-10 ORB or -10AN)
M14x1.5mm coolant fitting T51R M
for front
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
Availablesor cover
compres l Order
AF8080-1000 Turbine outlet V-band
AF8080-1016 Turbine inlet V-band
AF8059-0001
AF8059-3000
Turbo drain gasket
5455 Core ONLY
Specia

304 aeroflowperformance.com
 5455 TURBOS

BOOSTED 5455 RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 340-650HP

Recommended engine displacement: 1.8L to 3L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with restrictor included
in turbo kit. (Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 71mm 73.79mm 0.60 60mm 55mm 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit V band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

.83 Rear Housing 1.01 Rear Housing

Part No Description Part No Description
AF8005-3101 Natural Cast AF8005-3102 Natural Cast
AF8005-3101BLK Hi Temp Black AF8005-3102BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8080-1016 Turbine inlet V-band
AF8059-0001 Turbo drain gasket
AF8059-3101 5455 reverse rotation CORE ONLY

aeroflowperformance.com 305
 5855 TURBOS

BOOSTED 5855 V-BAND

Recommended horsepower rating: 400-750HP
Recommended engine displacement: 1.8L to 3L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with
restrictor included in turbo kit. (Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

58mm 76.2mm 80.42mm 0.60 60mm 55mm 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit V band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

.83 Rear Housing V-BAND 1.01 Rear Housing V-BAND

Part No Description Part No Description
AF8005-3033 Natural Cast AF8005-3034 Natural Cast
AF8005-3033BLK Hi Temp Black AF8005-3034BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting T51R M
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
Available fo od
compresso r front
AF8080-1000 Turbine outlet V-band
AF8080-1016 Turbine inlet V-band
r co
AF8059-0001 Turbo drain gasket
Special Ord ver
AF8059-3005 5855 Core ONLY
er

306 aeroflowperformance.com
 5855 TURBOS

BOOSTED 5855 RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 400 - 750HP

Recommended engine displacement: 1.8L to 3L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with restrictor included
in turbo kit. (Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

58mm 76.2mm 80.42mm 0.60 60mm 55mm 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit V band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

.83 Rear Housing 1.01 Rear Housing

Part No Description Part No Description
AF8005-3106 Natural Cast AF8005-3107 Natural Cast
AF8005-3106BLK Hi Temp Black AF8005-3107BLK Hi Temp Black
Description

Spare parts ( all sold separately )

Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8080-1016 Turbine inlet V-band
AF8059-0001 Turbo drain gasket
AF8059-3106 5855 reverse rotation CORE ONLY

aeroflowperformance.com 307
 5855 TURBOS

BOOSTED 5855
Recommended horsepower rating: 400 - 750HP
Recommended engine displacement: 1.8L to 3L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN turbo oil feed fitting with
restrictor included in turbo kit. (Warranty VOID if not used)
T3 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

58mm 76.2mm 80.42mm 0.60 60mm 55mm 0.63 or 0.82 or 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit T3 V band (AF8080-1000) External wastegate sold separately

.63 Rear Housing .82 Rear Housing 1.06 Rear Housing

Part No Description Part No Description Part No Description
AF8005-3005 Natural Cast AF8005-3006 Natural Cast AF8005-3007 Natural Cast
AF8005-3005BLK Hi Temp Black AF8005-3006BLK Hi Temp Black AF8005-3007BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description Optional Rear Housings ( sold separately )
AF9557-0005 T3 inlet gasket Single-layer) Part No Description
AF9557-1002 T3 inlet gasket (Multi-layer)
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN) AF8050-1007 SiMo-nodular cast iron V-Band 0.83
AF732-06 M14x1.5mm coolant fitting AF8050-1008 SiMo-nodular cast iron V-Band 1.01
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8059-0001 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0002 Turbine inlet flange stainless steel
AF8059-3005 5855 CORE ONLY

308 aeroflowperformance.com
 5862 TURBOS

BOOSTED 5862
Recommended horsepower rating: 400-750HP
Recommended engine displacement: 2L to 4.5L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T3 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

58mm 76.2mm 80.42mm 0.60 60mm 62.3mm 0.63 or 0.82 or 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T3 V band (AF8080-1000) External wastegate sold separately

.63 Rear Housing .82 Rear Housing 1.06 Rear Housing

Part No Description Part No Description Part No Description
AF8005-3010 Natural Cast AF8005-3011 Natural Cast AF8005-3012 Natural Cast
AF8005-3010BLK Hi Temp Black AF8005-3011BLK Hi Temp Black AF8005-3012BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
Optional Rear Housings ( sold separately )
AF9557-0005 T3 inlet gasket Single-layer)
AF9557-1002 T3 inlet gasket (Multi-layer) Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting AF8050-1000 Stainless steel single entry V-Band .82
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor AF8050-1015 SiMo-nodular cast iron V-Band single entry 0.83
AF8080-1000 Turbine outlet V-band AF8050-1001 SiMo-nodular cast iron V-Band single entry 1.01
AF8059-0001 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0002 Turbine inlet flange stainless steel
AF8059-3010 5862 CORE ONLY

aeroflowperformance.com 309
 6662 TURBOS

BOOSTED 6662
Recommended horsepower rating: 450-900HP
Recommended engine displacement: 2L to 4.5L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T3 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66mm 82mm 87.5mm 0.72 68mm 62.3mm 0.63 or 0.82 or 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T3 V band (AF8080-1000) External wastegate sold separately

.63 Rear Housing .82 Rear Housing 1.06 Rear Housing

Part No Description Part No Description Part No Description
AF8005-3015 Natural Cast AF8005-3016 Natural Cast AF8005-3017 Natural Cast
AF8005-3015BLK Hi Temp Black AF8005-3016BLK Hi Temp Black AF8005-3017BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
Optional Rear Housings ( sold separately )
AF9557-0005 T3 inlet gasket Single-layer)
AF9557-1002 T3 inlet gasket (Multi-layer)
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
Part No Description
AF732-06 M14x1.5mm coolant fitting AF8050-1000 Stainless steel single entry V-Band .82
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor AF8050-1015 SiMo-nodular cast iron V-Band single entry 0.83
AF8080-1000 Turbine outlet V-band AF8050-1001 SiMo-nodular cast iron V-Band single entry 1.01
AF8059-0001 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0002 Turbine inlet flange stainless steel
AF8059-3014 6662 CORE ONLY

310 aeroflowperformance.com
 6662 TURBOS

BOOSTED 6662 T4
Recommended horsepower rating: 450-900HP
Recommended engine displacement: 2L to 4.5L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66mm 82mm 87.5mm 0.72 68mm 62.3mm 0.82

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 V band (AF8080-1000) External wastegate sold separately

T51R M
Available fo od
compresso r front
r co
Special Ord ver
er

.82 Rear Housing

Part No Description
AF8005-4000 Natural Cast
AF8005-4000BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0006 Single-layer T4 inlet gasket
AF9557-1006 Multi-layer T4 inlet gasket Optional Rear Housings ( sold separately )
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
Part No Description
AF8080-1000 Turbine outlet V-band AF8050-1000 Stainless steel single entry V-Band .82
AF8059-0001 Turbo drain gasket AF8050-1015 SiMo-nodular cast iron V-Band single entry 0.83
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange AF8050-1001 SiMo-nodular cast iron V-Band single entry 1.01
AF9551-0003 Turbine inlet flange stainless steel
AF8059-3014 6662 CORE ONLY

aeroflowperformance.com 311
 6662 TURBOS

BOOSTED 6662 V-BAND

Recommended horsepower rating: 450-900HP
Recommended engine displacement: 2L to 4.5L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with restrictor
included in turbo kit. (Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron or stainless steel rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66mm 82mm 87.5mm 0.72 68mm 62.3mm 0.82 or 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit .82 V band (AF8080-1010) V band (AF8080-1000) External wastegate sold separately
.83, 1.01 V band (AF8080-1016)

.82 STAINLESS STEEL .83 NODULAR CAST 1.01 NODULAR CAST

Rear Housing IRON Rear Housing IRON Rear Housing
Part No Description Part No Description Part No Description
AF8005-3020 Natural Cast AF8005-3022 Natural Cast AF8005-3023 Natural Cast
AF8005-3020BLK Hi Temp Black AF8005-3022BLK Hi Temp Black AF8005-3023BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description Optional Rear
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN) Housings
AF732-06
AF8059-0010
M14x1.5mm coolant fitting
7/16”-24 to -4AN oil feed fitting with in-built restrictor
(sold separately)
AF8080-1000 Turbine outlet V-band
AF8080-1010 Turbine inlet V-band suits .82 Part No Description
AF8080-1016 Turbine inlet V-band suits .83 and 1.01
AF8050-1000 Stainless steel single entry V-Band .82
AF8059-0001 Turbo drain gasket
AF8050-1015 SiMo-nodular cast iron V-Band single entry 0.83
AF8059-3014 6662 CORE ONLY
AF8050-1001 SiMo-nodular cast iron V-Band single entry 1.01
312 aeroflowperformance.com
 6662 TURBOS

BOOSTED 6662 RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 450-900HP

Recommended engine displacement: 2L to 4.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with restrictor
included in turbo kit. (Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66mm 82mm 87.5mm 0.72 68mm 62.3mm 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit V band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

1.01 Rear Housing

.83 Rear Housing Part No Description
AF8005-3117 Natural Cast
Part No Description AF8005-3117BLK Hi Temp Black
AF8005-3116 Natural Cast
AF8005-3116BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8080-1016 Turbine inlet V-band
AF8059-0001 Turbo drain gasket
AF8059-3116 6662 reverse rotation CORE ONLY

aeroflowperformance.com 313
 6673 TURBOS

BOOSTED 6673 T4
Recommended horsepower rating: 460-850HP
Recommended engine displacement: 2L to 6L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66.1mm 92.7mm 96.24mm 79.70mm 73.50mm 0.91

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 Twin entry V band (AF8080-1004) External wastegate sold separately

.91 T4 Rear Housing

Part No Description
AF8005-4019 Natural Cast
AF8005-4019BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0006 Single-layer T4 inlet gasket
AF9557-1006 Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8059-1012 1/4” NPT to -4AN oil feed fitting with in-built restrictor
AF8080-1004 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4819 6673 CORE ONLY

314 aeroflowperformance.com
 6762 TURBOS

BOOSTED 6762
Recommended horsepower rating: 550 - 950HP
Recommended engine displacement: 2L to 5.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T3 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67mm 84mm 87.5mm .72 68mm 62.3mm 0.82 or 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T3 V-band (AF8080-1000) External wastegate sold separately

.82 T3 Rear Housing 1.06 T3 Rear Housing

Part No Description Part No Description
AF8005-3021 Natural Cast AF8005-3030 Natural Cast
AF8005-3021BLK Hi Temp Black AF8005-3030BLK Hi Temp Black

Spare parts ( all sold separately )

Optional Rear
Part No Description
Housings
AF9557-0005
AF9557-1002
T3 inlet gasket (Single-layer)
T3 inlet gasket (Multi-layer) ( sold separately )
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8059-0001 Turbo drain gasket Part No Description
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0002 Turbine inlet flange stainless steel AF8050-1005 SiMo-nodular cast iron V-Band .83
AF8059-3018 6762 CORE ONLY AF8050-1006 SiMo-nodular cast iron V-Band 1.01

aeroflowperformance.com 315
 6762 TURBOS

BOOSTED 6762 V-BAND

Recommended horsepower rating: 550 - 950HP
Recommended engine displacement: 2L to 5.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting
with restrictor included in turbo kit.
(Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67mm 84mm 87.5mm .72 68mm 62.3mm 0.83 or 1.01 or 1.21

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit V-band (AF8080-1016) V-band (AF8080-1000) External wastegate sold separately

.83 V-BAND Rear Housing 1.01 V-BAND Rear Housing 1.21 V-BAND Rear Housing
Part No Description Part No Description Part No Description
AF8005-3025 Natural Cast AF8005-3026 Natural Cast AF8005-3027 Natural Cast
AF8005-3025BLK Hi Temp Black AF8005-3026BLK Hi Temp Black AF8005-3027BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band Optional Rear Housings ( sold separately )
AF8080-1016 Turbine inlet V-band
AF8059-0001 Turbo drain gasket
AF8059-3018 6762 CORE ONLY
Part No Description
AF8050-1005 SiMo-nodular cast iron V-Band .83
AF8050-1006 SiMo-nodular cast iron V-Band 1.01

316 aeroflowperformance.com
 6762 TURBOS

BOOSTED 6762 RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 550-950HP

Recommended engine displacement: 2L to 5.5L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting
with restrictor included in turbo kit.
(Warranty VOID if not used)
V-Band single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67mm 84mm 87.5mm 0.72 68mm 62.3mm 0.83 or 1.01

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit V band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

.83 Rear Housing 1.01 Rear Housing

Part No Description Part No Description
AF8005-3125 Natural Cast AF8005-3126 Natural Cast
AF8005-3125BLK Hi Temp Black AF8005-3126BLK Hi Temp Black

Description

Spare parts ( all sold separately )

Part No Description
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band
AF8080-1016 Turbine inlet V-band
AF8059-0001 Turbo drain gasket
AF8059-3125 6762 reverse rotation CORE ONLY

aeroflowperformance.com 317
 6762 TURBOS

BOOSTED 6762 T4
Recommended horsepower rating: 550-950HP
Recommended engine displacement: 2L to 5.5L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67mm 84mm 87.5mm 0.72 68mm 62.3mm 0.82

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 Single entry V band (AF8080-1000) External wastegate sold separately

od
T51R M
for front
Availablesor cover
compres l Order
.82 T4 Rear Housing Specia
Part No Description
AF8005-4022 Natural Cast
AF8005-4022BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0006 Single-layer T4 inlet gasket
AF9557-1006 Multi-layer T4 inlet gasket
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting Optional Rear Housings ( sold separately )
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8080-1000 Turbine outlet V-band Part No Description
AF8059-0001 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange AF8050-1005 SiMo-nodular cast iron V-Band .83
AF9551-0003 Turbine inlet flange stainless steel AF8050-1006 SiMo-nodular cast iron V-Band 1.01
AF8059-3018 6762 CORE ONLY

318 aeroflowperformance.com
 6766 TURBOS

BOOSTED 6766 T4
Recommended horsepower rating: 550-950HP
Recommended engine displacement: 2L to 6L
Point milled
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 single entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
7/16-24” oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67.4mm 82mm 88.3mm 74mm 66.1mm 0.82 or 0.96

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 Single entry V band (AF8080-1003) External wastegate sold separately

.81 T4 Rear Housing .96 T4 Rear Housing

Part No Description Part No Description
AF8005-4026 Natural Cast AF8005-4025 Natural Cast
AF8005-4026BLK Hi Temp Black AF8005-4025BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0006 Single-layer T4 inlet gasket
AF9557-1006 Multi-layer T4 inlet gasket
AF463-02 or AF463-06
AF8059-0010
Turbo drain adapter (-10 ORB or -10AN)
7/16”-24 to -4AN oil feed fitting with in-built restrictor
Optional Rear Housings ( sold separately )
AF8080-1003 Turbine outlet V-band
AF8059-0002 Turbo drain gasket Part No Description
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange AF8050-1003 SiMo-nodular cast iron T4 .81
AF9551-0003 Turbine inlet flange stainless steel AF8050-1016 SiMo-nodular cast iron T4 .96
AF8059-4825 6766 CORE ONLY AF8050-1028 SiMo-nodular cast iron dual V-Band .83

aeroflowperformance.com 319
 6766 TURBOS

BOOSTED 6766 V-BAND

Recommended horsepower rating: 550-950HP
Recommended engine displacement: 2L to 6L
Point milled.
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with
restrictor included in turbo kit. (Warranty VOID if not used)
V-band single entry turbine inlet flange.
V-Band turbine outlet flange.
SiMo-nodular cast iron rear housing.
7/16”-24 oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67.4mm 82mm 88.3mm 74mm 66.1mm 0.83

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit V band (AF8080-1016) V band (AF8080-1000) External wastegate sold separately

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8059-0010 7/16-24” to -4AN oil feed fitting with in-built restrictor
AF8080-1016 Turbine inlet V-band
AF8080-1000 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-4825 6766 CORE ONLY

.83 V-BAND Rear Housing

Part No Description
AF8005-4036 Natural Cast
Optional Rear Housings ( sold separately )
AF8005-4036BLK Hi Temp Black
Part No Description
AF8050-1003 SiMo-nodular cast iron T4 .81
AF8050-1016 SiMo-nodular cast iron T4 .96
AF8050-1028 SiMo-nodular cast iron dual V-Band .83

320 aeroflowperformance.com
 6973 TURBOS

BOOSTED 6973 T4
Recommended horsepower rating: 500-950HP
Recommended engine displacement: 2L to 6L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

69mm 92.5mm 96.4mm 79.7mm 73.5mm 0.91

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 twin entry V band (AF8080-1004) External wastegate sold separately

.91 T4 Rear Housing

Part No Description
AF8005-4016 Natural Cast
AF8005-4016BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0003 Single-layer T4 inlet gasket
AF9557-1003 Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8059-1012 1/4” NPT to -4AN oil feed fitting with in-built restrictor
AF8080-1004 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4816 6973 CORE ONLY

aeroflowperformance.com 321
 7075 TURBOS

BOOSTED 7075 T4
Recommended horsepower rating: 475-950HP
Recommended engine displacement: 2L to 7L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M18 x 1.5mm coolant port thread.
Oil feed fitting plate (38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

70mm 94mm 98mm .60 82mm 75mm 1.15

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1009) T4 Twin Entry V band (AF8080-1001) External wastegate sold separately

1.15 T4 Rear Housing

Part No Description
AF8005-4004 Natural Cast
AF8005-4004BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0003 Single-layer T4 inlet gasket
AF9557-1003
AF463-01 or AF463-05
Multi-layer T4 inlet gasket
Turbo drain adapter (-10 ORB or -10AN)
1.16 V-BAND Rear Housing
AF734-06 M18x1.5mm coolant fittings
AF8080-1001 Turbine outlet V-band Part No Description
AF8059-0002 Turbo drain gasket AF8005-4014 Natural Cast
AF8059-0011 Turbo oil feed plate with -4AN fitting AF8005-4014BLK Hi Temp Black
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8080-1009 Compressor Outlet V-band
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4004 7075 CORE ONLY

322 aeroflowperformance.com
 7575 TURBOS

BOOSTED 7575 T4
Recommended horsepower rating: 500-1050HP
Recommended engine displacement: 2.5L to 7L
Point milled.
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Billet CNC core.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
52.4mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 83.65mm 75mm 1.10

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1006) T4 Twin Entry V band (AF8080-1001) External wastegate sold separately

T51R M
Available fo od
compresso r front
r co
Special Ord ver
er

Spare parts ( all sold separately )

Part No Description
1.10 T4 Rear Housing AF9557-0006 Single-layer T4 inlet gasket
AF9557-1006 Multi-layer T4 inlet gasket
AF463-03 or AF463-07 Turbo drain adapter (-10 ORB or -10AN)
Part No Description AF8059-1012 1/4” NPT to -4AN oil feed fitting with in-built restrictor
AF8005-4017 Natural Cast AF8080-1001 Turbine outlet V-band
AF8005-4017BLK Hi Temp Black AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4817 7575 CORE ONLY

aeroflowperformance.com 323
 7875 TURBOS

BOOSTED 7875 T4
Recommended horsepower rating: 500-1050HP
Recommended engine displacement: 2L to 6L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
7/16-24” oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

78.13mm 102.4mm 106.3mm 82mm 75mm .96

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 Single Entry V band (AF8080-1024) External wastegate sold separately

.96 T4 Rear Housing Spare parts ( all sold separately )

Part No Description Part No Description
AF8005-4020 Natural Cast AF9557-0006 Single-layer T4 inlet gasket
AF8005-4020BLK Hi Temp Black AF9557-1006 Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8059-0010 7/16-24” to -4AN oil feed fitting with in-built restrictor
AF8080-1024 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4820 7875 CORE ONLY

324 aeroflowperformance.com
 7875 TURBOS

BOOSTED 7875 V-BAND

Recommended horsepower rating: 500-1050HP
Recommended engine displacement: 2L to 6L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting with
restrictor included in turbo kit. (Warranty VOID if not used)
V-Band turbine inlet flange.
V-Band turbine outlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
7/16-24” oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

78.13mm 102.4mm 106.3mm 82mm 75mm .96

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit V-Band (AF808-1023) V band (AF8080-1024) External wastegate sold separately

.96 V-BAND Rear Housing Spare parts ( all sold separately )

Part No Description Part No Description
AF8005-4030 Natural Cast AF463-02 or AF463-06 turbo drain adapter
AF8005-4030BLK Hi Temp Black AF732-06 M14 x1.5mm coolant fittings
AF8080-1024 Turbine outlet V-band
AF8080-1023 Turbine inlet V-band
AF8059-0002 Turbo drain gasket
AF8059-0010 7/16-24” to -4AN oil feed fitting with inbuilt restrictor
AF8059-4820 7875 CORE ONLY

aeroflowperformance.com 325
 7375 TURBOS

BOOSTED 7375 V-BAND

Recommended horsepower rating: 475 - 1200HP
Recommended engine displacement: 2L to 7L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010).
External wastegate sold separately.
SiMo-nodular cast iron rear housing.
V-band single entry turbine inlet flange.
V-band turbine outlet flange.
M14 x 1.5mm coolant port threads.
(Must install water lines on opposite sides of the housing).
7-16-24” oil feed fitting plate to -4AN with in-built restrictor
(38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

73mm 91mm 96mm .90 82mm 75mm 1.01 or 1.15 or 1.21

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 3” Slip fit V-Band (AF8080-1019) V-Band (AF8080-1020) External wastegate sold separately

1.01 V-BAND Rear Housing 1.15 V-BAND Rear Housing 1.28 V-BAND Rear Housing
Part No Description Part No Description Part No Description
AF8005-4006 Natural Cast AF8005-4008 Natural Cast AF8005-4009 Natural Cast
AF8005-4006BLK Hi Temp Black AF8005-4008BLK Hi Temp Black AF8005-4009BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16-24” to -4AN oil feed fitting with in built restrictor
AF8059-0011 -4AN oil feed plate with in-built restrictor
T51R M
Available fo od
AF8080-1020 Turbine outlet V-band
AF8080-1019 Turbine inlet V-band
AF8059-0002 Turbo drain gasket compresso r front
r co
AF8059-4006 7375 CORE ONLY
Special Ord ver
er
326 aeroflowperformance.com
 7375 TURBOS

BOOSTED 7375 RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 475 - 1200HP

Recommended engine displacement: 2L to 7L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010).
External wastegate sold separately.
SiMo-nodular cast iron rear housing.
V-band single entry turbine inlet flange.
V-band turbine outlet flange.
M14 x 1.5mm coolant port threads.
(Must install water lines on opposite sides of the housing).
7-16-24” oil feed fitting plate to -4AN with in-built restrictor
(38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

73mm 91mm 96mm .90 82mm 75mm 1.01 or 1.15 or 1.21

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 3” Slip fit V-Band (AF8080-1019) V-Band (AF8080-1020) External wastegate sold separately

1.01 V-BAND Rear Housing 1.15 V-BAND Rear Housing 1.28 V-BAND Rear Housing
Part No Description Part No Description Part No Description
AF8005-4106 Natural Cast AF8005-4108 Natural Cast AF8005-4109 Natural Cast
AF8005-4106BLK Hi Temp Black AF8005-4108BLK Hi Temp Black AF8005-4109BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16-24” to -4AN oil feed fitting with in built restrictor
AF8059-0011 -4AN oil feed plate with in-built restrictor
AF8080-1020 Turbine outlet V-band
AF8080-1019 Turbine inlet V-band
AF8059-0002 Turbo drain gasket
AF8059-4106 7375 reverse rotation CORE ONLY

aeroflowperformance.com 327
 7675 TURBOS

BOOSTED 7675 T4
Recommended horsepower rating: 525-1120HP
Recommended engine displacement: 2L to 8L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
M18 x 1.5mm coolant port thread.
Oil feed fitting plate (38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

76mm 102mm 107mm .60 82mm 75mm 1.15

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1009) T4 Twin Entry V band (AF8080-1001) External wastegate sold separately

1.15 T4 Rear Housing Spare parts ( all sold separately )

Part No Description
Part No Description
AF9557-0003 Single-layer T4 inlet gasket
AF8005-4005 Natural Cast AF9557-1003 Multi-layer T4 inlet gasket
AF8005-4005BLK Hi Temp Black AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF734-06 M18x1.5mm coolant fittings
AF8080-1001 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-0011 Turbo oil feed plate with -4AN fitting
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8080-1009 Compressor Outlet V-band
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4005 7675 CORE ONLY
328 aeroflowperformance.com
 7675 TURBOS

BOOSTED 7675 V-BAND

Recommended horsepower rating: 525-1120HP
Recommended engine displacement: 2L to 8L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
V-Band turbine inlet flange.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
SiMo-nodular cast iron rear housing.
M18 x 1.5mm coolant port thread.
Oil feed fitting plate (38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

76mm 102mm 107mm .60 82mm 75mm 1.16

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1009) V-band (AF8080-1021) V band (AF8080-1001) External wastegate sold separately

Spare parts ( all sold separately )

Part No Description
1.16 V-BAND Rear Housing AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF734-06 M18x1.5mm coolant fittings
Part No Description AF8080-1021 Turbine inlet V-band
AF8080-1001 Turbine outlet V-band
AF8005-4013 Natural Cast AF8059-0002 Turbo drain gasket
AF8005-4013BLK Hi Temp Black AF8059-0011 Turbo oil feed plate with -4AN fitting
AF8080-1009 Compressor Outlet V-band
AF8059-4005 7675 CORE ONLY

aeroflowperformance.com 329
 7975 TURBOS

BOOSTED 7975 V-BAND

Recommended horsepower rating: 475 - 1450HP
Recommended engine displacement: 2L to 8L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010).
External wastegate sold separately.
SiMo-nodular cast iron rear housing.
V-band single entry turbine inlet flange.
V-band turbine outlet flange.
V-band compressor outlet flange.
M14 x 1.5mm coolant port threads.
(Must install water lines on opposite sides of the housing).
7-16-24” oil feed fitting plate to -4AN with in-built restrictor
(38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

79mm 98mm 103mm .85 82mm 75mm 1.01 or 1.15 or 1.28

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1009) V-band (AF8080-1019 V-band (AF8080-1020) External wastegate sold separately

1.01 V-BAND Rear Housing 1.15 V-BAND Rear Housing 1.28 V-BAND Rear Housing
Part No Description Part No Description Part No Description
AF8005-4010 Natural Cast AF8005-4011 Natural Cast AF8005-4012 Natural Cast
AF8005-4010BLK Hi Temp Black AF8005-4011BLK Hi Temp Black AF8005-4012BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16-24” to -4AN with in-built restrictor
AF8059-0011 -4AN oil feed plate with in-built restrictor
AF8080-1020 Turbine outlet V-band T51R Mod
AF8080-1019 Turbine inlet V-band Available for front
AF8080-1009 Compressor outlet V-band compressor cover
AF8059-0002 Turbo drain gasket Special Order
AF8059-4010 7975 CORE ONLY

330 aeroflowperformance.com
 7975 TURBOS

BOOSTED 7975 V-BAND RRT

This is a reverse rotation turbocharger for applications that want the
perfect twin turbo installation or a single reverse rotation turbo with
installation restrictions

Recommended horsepower rating: 475 - 1450HP

Recommended engine displacement: 2L to 8L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010).
External wastegate sold separately.
SiMo-nodular cast iron rear housing.
V-band single entry turbine inlet flange.
V-band turbine outlet flange.
V-band compressor outlet flange.
M14 x 1.5mm coolant port threads.
(Must install water lines on opposite sides of the housing).
7-16-24” oil feed fitting plate to -4AN with in-built restrictor
(38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

79mm 98mm 103mm .85 82mm 75mm 1.01 or 1.15 or 1.28

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1009) V-band (AF8080-1019) V-band (AF8080-1020) External wastegate sold separately

1.01 V-BAND Rear Housing 1.15 V-BAND Rear Housing 1.28 V-BAND Rear Housing
Part No Description Part No Description Part No Description
AF8005-4110 Natural Cast AF8005-4111 Natural Cast AF8005-4112 Natural Cast
AF8005-4110BLK Hi Temp Black AF8005-4111BLK Hi Temp Black AF8005-4112BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16-24” to -4AN with in-built restrictor
AF8059-0011 -4AN oil feed plate with in-built restrictor
AF8080-1020 Turbine outlet V-band
AF8080-1019 Turbine inlet V-band
AF8080-1009 Compressor outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-4110 7975 reverse rotation CORE ONLY

aeroflowperformance.com 331
 8075 TURBOS

BOOSTED 8075 T4
Recommended horsepower rating: 750 - 1250HP
Recommended engine displacement: 2.5L to 7L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Billet CNC core.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x
1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

80.3mm 113mm 117.36mm 83.65mm 75mm 1.10

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1025) T4 twin entry V-band (AF8080-1001) External wastegate sold separately

Spare parts ( all sold separately )

1.10 T4 Rear Housing Part No Description
Part No Description AF9557-0003 Single layer T4 twin entry inlet gasket
AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF8005-4018 Natural Cast AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8005-4018BLK Hi Temp Black AF8080-1001 Turbine outlet flange V-band
AF8080-1025 Compressor outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-1012 1/4” NPT to -4AN oil feed fitting with in-built restrictor
AF8059-1001 Stud and Nut fitting kit
AF8059-4818 8075 CORE ONLY

332 aeroflowperformance.com
 8077 TURBOS

BOOSTED 8077 T4
Recommended horsepower rating: 700 - 1250HP
Recommended engine displacement: 2L to 8L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
M18 x 1.5mm coolant port thread.
Oil feed fitting plate (38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

79.8mm 108.4mm 113mm .69 88.9mm 77.4mm 1.15

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1009) T4 twin entry V-band (AF8080-1001) External wastegate sold separately

Spare parts ( all sold separately )

1.15 T4 Rear Housing Part No Description
Part No Description AF9557-0003 Single-layer T4 inlet gasket
AF9557-1003 Multi-layer T4 inlet gasket
AF8005-4007 Natural Cast AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8005-4007BLK Hi Temp Black AF734-06 M18x1.5mm coolant fittings
AF8080-1001 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-0011 Turbo oil feed plate with -4AN fitting
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8080-1009 Compressor Outlet V-band
AF9551-0003 Turbine inlet flange stainless steel
AF8059-4007 8077 CORE ONLY

aeroflowperformance.com 333
 8077 TURBOS

BOOSTED 8077 T6
Recommended horsepower rating: 700 - 1250HP
Recommended engine displacement: 2L to 8L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T6 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
M18 x 1.5mm coolant port thread.
Oil feed fitting plate (38mm bolt centre with M8x1.25mm)
50.8mm bolt centre turbo drain flange with M8 x 1.25mm.
thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

79.8mm 108.4mm 113mm .69 88.9mm 77.4mm 1.26

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1009) T6 twin entry V-band (AF8080-1002) External wastegate sold separately

Spare parts ( all sold separately )

1.26 T6 Rear Housing
Part No Description
Part No Description AF9557-0004 Single-layer T6 inlet gasket
AF9557-1007 Multi-layer T6 inlet gasket
AF8005-6000 Natural Cast
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8005-6000BLK Hi Temp Black
AF734-06 M18x1.5mm coolant fittings
AF8080-1002 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-0011 Turbo oil feed plate with -4AN fitting
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8080-1009 Compressor Outlet V-band
AF8059-4007 8077 CORE ONLY

334 aeroflowperformance.com
 8077 TURBOS

BOOSTED 8077 V-BAND

Recommended horsepower rating: 700 - 1250HP
Recommended engine displacement: 2L to 8L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Turbo drain gasket and -4AN turbo oil feed fitting
with restrictor included in turbo kit.
(Warranty VOID if not used)
SiMo-nodular cast iron rear housing.
V-band single entry turbine inlet flange.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
M18 x 1.5mm coolant port thread.
Oil feed fitting plate (38mm bolt centre with M8x1.25mm).
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

79.8mm 108.4mm 113mm .69 88.9mm 77.4mm 1.16

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1009) V-band (AF8080-1021 V-band (AF8080-1001) External wastegate sold separately

T51R M
Available fo od
compresso r front
r co
Special Ord ver
er

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
1.16 V-BAND Rear Housing AF734-06
AF8080-1001
M18x1.5mm coolant fittings
Turbine outlet V-band
AF8080-1021 Turbine inlet V-band
Part No Description AF8080-1009 Compressor outlet V-band
AF8059-0002 Turbo drain gasket
AF8005-4015 Natural Cast
AF8059-0011 Turbo oil feed plate with -4AN fitting
AF8005-4015BLK Hi Temp Black
AF8059-4007 8077 CORE ONLY

aeroflowperformance.com 335
 7588 TURBOS

BOOSTED 7588 T4
Recommended horsepower rating: 1100 - 1500HP
Recommended engine displacement: 3L to 7L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Billet CNC core.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN.
Turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 95.71mm 88mm 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T4 twin entry V-band (AF8080-1001) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

1.25 T4 Rear Housing
Part No Description
Part No Description
AF9557-0003 Single layer T4 twin entry inlet gasket
AF8005-4027 Natural Cast AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF8005-4027BLK Hi Temp Black AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1001 Turbine outlet flange V-band
AF8080-1006 Turbine compressor outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-1012 1/4” NPT to -4AN oil feed fitting with in-built restrictor
AF8059-1001 Stud and Nut fitting kit
AF8059-6810 7588 CORE ONLY

336 aeroflowperformance.com
 7588 TURBOS

BOOSTED 7588 T6
Recommended horsepower rating: 1100 - 1500HP
Recommended engine displacement: 3L to 7L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Billet CNC core.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T6 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x
1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 95.71mm 88mm 1.32

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T6 twin entry V-band (AF8080-1005) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

Part No Description
AF9557-0004 Single-layer T6 inlet gasket
AF9557-1007 Multi-layer T6 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1005 Turbine outlet V-band
1.32 T6 Rear Housing AF8059-0002 Turbo drain gasket
AF8059-1012 1/4”NPT to -4AN fitting
Part No Description AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8080-1006 Compressor Outlet V-band
AF8005-6010 Natural Cast AF8059-6810 7588 CORE ONLY
AF8005-6010BLK Hi Temp Black

aeroflowperformance.com 337
 8888 TURBOS

BOOSTED 8888 T4
Recommended horsepower rating: 1200 - 1600HP
Recommended engine displacement: 3L to 7L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Billet CNC core.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN.
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T4 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

88mm 117.36mm 124.4mm 95.71mm 88mm 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T4 twin entry V-band (AF8080-1001) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

1.25 T4 Rear Housing Part No Description
Part No Description AF9557-0003 Single layer T4 twin entry inlet gasket
AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF8005-4001 Natural Cast AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8005-4001BLK Hi Temp Black AF8080-1001 Turbine outlet flange V-band
AF8080-1006 Turbine compressor outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-1012 1/4” NPT to -4AN oil feed fitting with in-built restrictor
AF8059-1001 Stud and Nut fitting kit
AF8059-6811 8888 CORE ONLY

338 aeroflowperformance.com
 8888 TURBOS

BOOSTED 8888 T6
Recommended horsepower rating: 1200 - 1600HP
Recommended engine displacement: 3L to 7L
Dual ceramic ball bearing.
Billet aluminium compressor wheel.
Ported shroud compressor cover.
Billet CNC core.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
External wastegate sold separately.
Inlet flange gasket, turbo drain gasket and -4AN
turbo oil feed fitting with restrictor included in turbo kit.
(Warranty VOID if not used)
T6 twin entry turbine inlet flange.
SiMo-nodular cast iron rear housing.
V-Band turbine outlet flange.
V-Band compressor outlet flange.
1/4” NPT oil feed fitting with in-built restrictor.
50.8mm bolt centre turbo drain flange with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

88mm 117.36mm 124.4mm 95.71mm 88mm 1.32

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T6 twin entry V-band (AF8080-1005) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

Part No Description
AF9557-0004 Single-layer T6 inlet gasket
1.32 T6 Rear Housing AF9557-1007
AF463-02 or AF463-06
Multi-layer T6 inlet gasket
Turbo drain adapter (-10 ORB or -10AN)
AF8080-1005 Turbine outlet V-band
Part No Description AF8059-0002 Turbo drain gasket
AF8059-1012 1/4”NPT to -4AN fitting
AF8005-6011 Natural Cast AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8005-6011BLK Hi Temp Black AF8080-1006 Compressor Outlet V-band
AF8059-6811 8888 CORE ONLY

aeroflowperformance.com 339
 94103 TURBOS

BOOSTED 94103 T6
Recommended horsepower rating: 1000 - 2500HP
Recommended engine displacement: 3L to 12L

Triple ceramic ball bearing.

Billet CNC core.
Billet aluminium point milled compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
Oil cooled turbocharger.
External wastegate sold separately.
T6 dual entry turbine inlet flange .
V-band turbine outlet flange.
V-band compressor outlet flange.
Oil feed fitting plate (38mm bolt centre with M8 x 1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

94mm 133.8mm 138.4mm .88 112mm 103mm 1.24

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
6” Slip fit V-band (AF8080-1007) T6 twin entry V-band (AF8080-1008) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1033 Cast iron V-Band 1.22

1.24 T6 Rear Housing Spare parts ( all sold separately )

Part No Description
Part No Description
AF9557-0004 Single-layer T6 inlet gasket
AF8005-6005 Natural Cast AF9557-1007 Multi-layer T6 inlet gasket
AF8005-6005BLK Hi Temp Black AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1008 Turbine outlet V-band
AF8059-0002 Turbo drain gasket
AF8059-0011 Turbo oil feed plate with -4AN fitting
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8080-1007 Compressor Outlet V-band
AF8059-6005 94103 CORE ONLY

340 aeroflowperformance.com
 6673 TURBOS

BOOSTED 6673 T4
Recommended horsepower rating: 460-850HP
Recommended engine displacement: 2L to 6L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 dual entry turbine inlet flange.
V-band turbine outlet flange.
1/4” NPT oil feed fitting.
50.8mm bolt centre turbo drain plate
with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66.1mm 92.7mm 96.24mm 79.7mm 73.5mm .91

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 twin entry V-band (AF8080-1004) External wastegate sold separately

.91 T4 Rear Housing Spare parts ( all sold separately )

Part No Description Part No Description
AF8006-4015 Natural Cast
AF9557-0003 Turbine inlet flange gasket
AF8006-4015BLK Hi Temp Black
AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1004 Turbine outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4”NPT to -6AN oil feed fitting
AF8059-1001 Stud and Nut fitting kit
AF8059-4515 6673 CORE ONLY

aeroflowperformance.com 341
 6766 TURBOS

BOOSTED 6766 T4
Recommended horsepower rating: 460-850HP
Recommended engine displacement: 2L to 6L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 6 + 6 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 dual entry turbine inlet flange.
V-band turbine outlet flange.
1/8”NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread
size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67.4mm 82mm 88.3mm 74mm 66.1mm 0.81 or 0.96

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 Single entry V band (AF8080-1003) External wastegate sold separately

.96 T4 Rear Housing

.81 T4 Rear Housing
Part No Description
Part No Description
AF8006-4005 Natural Cast
AF8006-4006 Natural Cast AF8006-4005BLK Hi Temp Black
AF8006-4006BLK Hi Temp Black
AF8050-1016
AF8050-1003

Spare parts ( all sold separately )

Part No Description
AF9557-0006 Single-layer T4 single entry inlet gasket
AF9557-1006 Multi-layer T4 single entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1003 Turbine outlet flange V-band
AF8059-0002 Turbo drain gasket Optional Rear Housings ( sold separately )
AF380-02-06 1/8”NPT to -6AN oil feed fitting
AF8059-1001 Stud and Nut fitting kit Part No Description
AF8059-4505 6766 CORE ONLY
AF8050-1003 SiMo-nodular iron V-Band .81 T4 single entry
AF8050-1016 SiMo-nodular iron V-Band .96 T4 single entry
AF8050-1028 SiMo-nodular iron Dual V-Band .83

342 aeroflowperformance.com
 6973 TURBOS

BOOSTED 6973 T4
Recommended horsepower rating: 500-950HP
Recommended engine displacement: 2L to 6L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 dual entry turbine inlet flange.
V-band turbine outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

69mm 92.5mm 96.4mm 79.7mm 73.5mm .91

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 twin entry V-band (AF8080-1004) External wastegate sold separately

.91 T4 Rear Housing Spare parts ( all sold separately )

Part No Description Part No Description
AF8006-4016 Natural Cast AF9557-0003 Single-layer T4 twin entry inlet gasket
AF8006-4016BLK Hi Temp Black AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1004 Turbine outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4”NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit
AF8059-4516 6973 CORE ONLY

aeroflowperformance.com 343
 7875 TURBOS

BOOSTED 7875 T4
Recommended horsepower rating: 475-950HP
Recommended engine displacement: 2L to 6L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 11 blade compressor wheel.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 turbine inlet flange.
V-band turbine outlet flange.
1/8” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

78.13mm 102.4mm 106.3mm 82mm 75mm 0.96 or 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 V band External wastegate sold separately

.96 T4 Rear Housing Single Entry 1.25 T4 Rear Housing Twin Entry
Part No Description Part No Description
AF8006-4010 Natural Cast AF8006-4011 Natural Cast
AF8006-4010BLK Hi Temp Black AF8006-4011BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0006 Single-layer T4 inlet gasket
AF9557-1006 Multi-layer T4 inlet gasket
AF9557-0003 Single-layer T4 twin entry inlet gasket
AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1003 Turbine outlet flange V-band to suit .96 AR Optional Rear Housings ( sold separately )
AF8080-1024 Turbine outlet flange V-band to suit 1.25 AR
AF8059-0002 Turbo drain gasket Part No Description
AF380-02-06 1/8” NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit AF8050-1017 SiMo-nodular iron Dual V-Band .96
AF8059-4510 7875 CORE ONLY

344 aeroflowperformance.com
 B7875 TURBOS

BOOSTED B7875
Recommended horsepower rating: 475-1150HP
Recommended engine displacement: 2L to 6L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Point milled 7+7 blade compressor wheel
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 turbine inlet flange.
V-band turbine outlet flange.
1/8” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

78.13mm 102.4mm 106.3mm 82mm 75mm 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T4 V band (AF8080-1026) External wastegate sold separately

1.25 T4 Rear Housing Twin Entry

Part No Description
AF8006-4012 Natural Cast
AF8006-4012BLK Hi Temp Black

T51R M
Available fo od
compresso r front
Spare parts ( all sold separately )
r co
Part No Description
Special Ord ver
AF9557-0003 Single-layer T4 twin entry inlet gasket er
AF9557-1003 Multi-layer T4 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1026 Turbine outlet flange V-band to suit 1.25 AR
AF8059-0002 Turbo drain gasket
AF380-02-06 1/8” NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit

aeroflowperformance.com 345
 7375 TURBOS
7575

BOOSTED 7575 T4
Recommended horsepower rating: 500-1050HP
Recommended engine displacement: 2.5L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 twin entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 83.65mm 75mm 1.10

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1006) T4 Twin Entry V band (AF8080-1027) External wastegate sold separately

1.10 T4 Rear Housing

Part No Description
AF8006-4017 Natural Cast
AF8006-4017BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0003 Single-layer T4 inlet gasket
AF9557-1003 Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1027 Turbine outlet flange V-band
AF8080-1006 Compressor outlet flange V-band
d
AF8059-0002 Turbo drain gasket
T51R Mrofront
fo
Available r cover
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit
o
AF8059-4517 7575 CORE ONLY
compress Order
Special
346 aeroflowperformance.com
 8075 TURBOS

BOOSTED 8075 T4
Recommended horsepower rating: 750-1250HP
Recommended engine displacement: 2.5L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 single entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

80.3mm 113mm 117.36mm 83.65mm 75mm 1.10

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1006) T4 Twin Entry V band (AF8080-1027) External wastegate sold separately

1.10 T4 Rear Housing

Part No Description
AF8006-4018 Natural Cast
AF8006-4018BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0003 Single-layer T4 inlet gasket
AF9557-1003 Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1027 Turbine outlet flange V-band
AF8080-1006 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit
AF8059-4518 8075 CORE ONLY

aeroflowperformance.com 347
 7588 TURBOS

BOOSTED 7588 T4
Recommended horsepower rating: 1150 - 1500HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 twin entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 95.71mm 88mm 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T4 twin entry V-band (AF8080-1001) External wastegate sold separately

1.25 T4 Rear Housing

Part No Description
AF8006-4027 Natural Cast
AF8006-4027BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF9557-0003 Single-layer T4 inlet gasket
AF9557-1003 Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1001 Turbine outlet flange V-band
AF8080-1006 Compressor outlet flange V-band
AF8059-0002
AF380-04-06
Turbo drain gasket
1/4” NPT to -6AN oil feed fitting stainless steel
Optional Rear Housings ( sold separately )
AF8059-1001 Stud and Nut fitting kit
AF8059-6500 7588 CORE ONLY Part No Description
AF8050-1002 Cast iron V-Band 1.31

348 aeroflowperformance.com
 7588 TURBOS

BOOSTED 7588 T6
Recommended horsepower rating: 1150 - 1500HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T6 twin entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 95.71mm 88mm 1.32

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T6 twin entry V-band (AF8080-1005) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

1.32 T6 Rear Housing
Part No Description
Part No Description AF9557-0007 Single layer T6 twin entry inlet gasket
AF8006-6000 Natural Cast AF9557-1007 Multi-layer T6 twin entry inlet gasket
AF8006-6000BLK Hi Temp Black AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1005 Turbine outlet flange V-band
AF8080-1006 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit
AF8059-6500 7588 CORE ONLY

aeroflowperformance.com 349
 7588 TURBOS

BOOSTED 7588 V-BAND

Recommended horsepower rating: 1150 - 1500HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
V-band turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

75mm 100.32mm 105.9mm 95.71mm 88mm 1.31

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1006) V-band (AF8080-1011) V band (AF8080-1012) External wastegate sold separately

1.31 V-BAND Rear Housing

Part No Description
AF8006-6002 Natural Cast
AF8006-6002BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1012 Turbine outlet flange V-band
AF8080-1011 Turbine inlet flange V-band
AF8080-1006 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF8059-6500 7588 CORE ONLY

350 aeroflowperformance.com
 7885 TURBOS

BOOSTED 7885 T4
Recommended horsepower rating: 500 - 1450HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 turbine inlet flange.
V-band turbine outlet flange.
1/8” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

78mm 102.40mm 106.3mm 89mm 85mm 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit 3” Slip fit T4 twin entry V band (AF8080-1026) External wastegate sold separately

Spare parts ( all sold separately )

Part No Description
1.25 T4 Rear Housing AF9557-0003
AF9557-1003
Single-layer T4 inlet gasket
Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
Part No Description AF8080-1026 Turbine outlet flange V-band
AF8059-0002 Turbo drain gasket
AF8006-4020 Natural Cast AF380-02-06 1/8” NPT to -6AN oil feed fitting stainless steel
AF8006-4020BLK Hi Temp Black AF8059-1001 Stud and Nut fitting kit
AF8059-4020 7885 CORE ONLY

aeroflowperformance.com 351
 8888 TURBOS

BOOSTED 8888 T4
Recommended horsepower rating: 1200 - 1600HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T4 Twin entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

88mm 117.36mm 124.4mm 95.71mm 88mm 1.25

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T4 twin entry V-band (AF8080-1005) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

Part No Description
1.25 T4 Rear Housing AF9557-0003
AF9557-1003
Single-layer T4 inlet gasket
Multi-layer T4 inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
Part No Description AF8080-1005 Turbine outlet flange V-band
AF8006-4001 Natural Cast AF8080-1006 Compressor outlet flange V-band
AF8006-4001BLK Hi Temp Black AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF8059-1001 Stud and Nut fitting kit
AF8059-6501 8888 CORE ONLY

352 aeroflowperformance.com
 8888 TURBOS

BOOSTED 8888 T6
Recommended horsepower rating: 1200 - 1600HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T6 twin entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

88mm 117.36mm 124.4mm 95.71mm 88mm 1.32

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V-band (AF8080-1006) T6 twin entry V-band (AF8080-1005) External wastegate sold separately

Optional Rear Housings ( sold separately )

Part No Description
AF8050-1002 Cast iron V-Band 1.31

Spare parts ( all sold separately )

1.32 T6 Rear Housing Part No Description
Part No Description AF9557-0007 Single layer T6 twin entry inlet gasket
AF9557-1007 Multi-layer T6 twin entry inlet gasket
AF8006-6001 Natural Cast AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8006-6001BLK Hi Temp Black AF8080-1005 Turbine outlet flange V-band
AF8080-1006 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF463-26 Turbo oil feed plate with -6AN
AF8059-1001 Stud and Nut fitting kit
AF8059-6501 8888 CORE ONLY

aeroflowperformance.com 353
 8888 TURBOS

BOOSTED 8888 V-BAND

Recommended horsepower rating: 1200-1600HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
V-band turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with
M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

88mm 117.36mm 124.4mm 95.71mm 88mm 1.31

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
5” Slip fit V band (AF8080-1006) V band (AF8080-1011) V band (AF8080-1012) External wastegate sold separately

1.31 V-BAND Rear Housing

Part No Description
AF8006-6003 Natural Cast
AF8006-6003BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1012 Turbine outlet flange V-band
AF8080-1011 Turbine inlet flange V-band
AF8080-1006 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF463-26 Turbo oil feed plate with -6AN
AF8059-6501 8888 CORE ONLY

354 aeroflowperformance.com
 94102 TURBOS

BOOSTED 94102 T6
Recommended horsepower rating: 1000 - 2500HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T6 single entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

94mm 133mm 138mm 0.88 112mm 102mm 1.24

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
6” Slip fit V-band (AF8080-1007) T6 twin entry V-band (AF8080-1008) External wastegate sold separately

Spare parts ( all sold separately )

Part No Description
AF9557-0007 Single layer T6 twin entry inlet gasket
AF9557-1007 Multi-layer T6 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1008 Turbine outlet flange V-band
AF8080-1007 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF463-26 Turbo oil feed plate with -6AN
1.24 T6 Rear Housing AF8059-1001 Stud and Nut fitting kit

Part No Description
AF8006-6010 Natural Cast
AF8006-6010BLK Hi Temp Black

aeroflowperformance.com 355
 98102 TURBOS

BOOSTED 98102 T6
Recommended horsepower rating: 1000 - 2500HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T6 single entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

98mm 133mm 138mm 0.88 112mm 102mm 1.24

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
6” Slip fit V-band (AF8080-1007) T6 twin entry V-band (AF8080-1008) External wastegate sold separately

Mod
T51Rle for front
b r
Availa essor cove
r
comp cial Order
Spe

Spare parts ( all sold separately )

Part No Description
AF9557-0007 Single layer T6 twin entry inlet gasket
1.24 T6 Rear Housing AF9557-1007 Multi-layer T6 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
Description AF8080-1008 Turbine outlet flange V-band
Part No
AF8080-1007 Compressor outlet flange V-band
AF8006-6011 Natural Cast AF8059-0002 Turbo drain gasket
AF8006-6011BLK Hi Temp Black AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF463-26 Turbo oil feed plate with -6AN
AF8059-1001 Stud and Nut fitting kit

356 aeroflowperformance.com
 102102 TURBOS

BOOSTED 102102 T6
Recommended horsepower rating: 1400 - 2850HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T6 single entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

102mm 144mm 148mm 0.88 112mm 102mm 1.24

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
6” Slip fit V-band (AF8080-1007) T6 twin entry V-band (AF8080-1008) External wastegate sold separately

T51R Mod
Available for front
compressor cover
Special Order

Spare parts ( all sold separately )

Part No Description
AF9557-0007 Single layer T6 twin entry inlet gasket
AF9557-1007 Multi-layer T6 twin entry inlet gasket
AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8080-1008 Turbine outlet flange V-band
1.24 T6 Rear Housing AF8080-1007 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
Part No Description AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF463-26 Turbo oil feed plate with -6AN
AF8006-6012 Natural Cast AF8059-1001 Stud and Nut fitting kit
AF8006-6012BLK Hi Temp Black

aeroflowperformance.com 357
 106102 TURBOS

BOOSTED 106102 T6
Recommended horsepower rating: 1400 - 2850HP
Recommended engine displacement: 3L to 7L

This is a 360 degree journal bearing turbo.

This is an oil cooled turbocharger.
Billet aluminium 7 + 7 compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
External wastegate sold separately.
T6 single entry turbine inlet flange.
V-band turbine outlet flange.
V-band Compressor outlet flange.
1/4” NPT oil feed fitting.
Alternative Oil feed fitting plate (38mm bolt centre
with M8x1.25mm).
50.8mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

106mm 144mm 148mm 0.88 112mm 102mm 1.24

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
6” Slip fit V-band (AF8080-1007) T6 twin entry V-band (AF8080-1008) External wastegate sold separately

T51R Mod
Available for front
compressor cover
Special Order

Spare parts ( all sold separately )

1.24 T6 Rear Housing Part No Description
Part No Description AF9557-0007 Single layer T6 twin entry inlet gasket
AF9557-1007 Multi-layer T6 twin entry inlet gasket
AF8006-6013 Natural Cast AF463-02 or AF463-06 Turbo drain adapter (-10 ORB or -10AN)
AF8006-6013BLK Hi Temp Black AF8080-1008 Turbine outlet flange V-band
AF8080-1007 Compressor outlet flange V-band
AF8059-0002 Turbo drain gasket
AF380-04-06 1/4” NPT to -6AN oil feed fitting stainless steel
AF463-26 Turbo oil feed plate with -6AN
AF8059-1001 Stud and Nut fitting kit

358 aeroflowperformance.com
 4728 TURBOS

BOOSTED 4728 NISSAN

Recommended horsepower rating: 200-440HP
Recommended engine displacement: 1.4L to 2.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Nissan S14 / S15 2 bolt compressor cover inlet.
Nissan S14 / S15 3 bolt compressor cover outlet.
T25 / T28 single entry turbine inlet flange.
Aftermarket oil feed line & turbo line restrictor must be used with this turbo.
Will suit standard coolant lines or M14 x 1.5mm coolant fittings sold separately.
Will suit standard turbo drain or turbo drain adapter.
sold separately AF463-01or AF463-05.
5 bolt Nissan turbine outlet flange ( M8 x 1.25mm thread size ).
SiMo-nodular cast iron rear housing.
M14 x 1.5mm coolant fitting port thread.
7/16”-24 oil feed fitting with in-built restrictor MUST BE USED.
38mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
Internal wastegate with 8.7PSI spring.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

46mm 60.1mm 62.24mm .60 53.9mm 47mm 0.64 or 0.86

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
Nissan S14 / S15 2 bolt Nissan S14 / S15 3 bolt T25 / T28 5 Bolt External wastegate with 8.7PSI actuator

.64 Rear Housing

Part No Description
AF8005-2002 Natural Cast

Spare parts ( all sold separately )

Part No Description
AF9557-0001 Turbine inlet gasket (single layer)
AF9557-1001 Multi-layer turbine inlet gasket
AF30-1001 Nissan S13 oil and water line kit
AF30-1002
AF8059-0010
Nissan S14 / S15 oil and water line kit
7/16”-24 to -4AN oil feed fitting with in-built restrictor
.86 Rear Housing
AF8059-0001 Turbo drain gasket
AF9557-1011 5 bolt turbine exhaust gasket multi-layer Part No Description
AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange AF8005-2003 Natural Cast
AF9551-0005 Stainless steel 5 bolt turbine outlet flange
AF9551-0001 Turbine inlet flange stainless steel (CNC machined)
AF8050-1021 Billet Actuator (14 PSI spring installed)

aeroflowperformance.com 359
 5428 TURBOS

BOOSTED 5428 NISSAN

Recommended horsepower rating: 250-525HP
Recommended engine displacement: 1.8L to 3L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Nissan S14 / S15 2 bolt compressor cover inlet.
Nissan S14 / S15 3 bolt compressor cover outlet.
T25 / T28 single entry turbine inlet flange.
Aftermarket oil feed line & turbo line restrictor must be used with this turbo.
Will suit standard coolant lines or M14 x 1.5mm coolant fittings sold separately.
Will suit standard turbo drain or turbo drain adapter.
sold separately AF463-01or AF463-05.
5 bolt Nissan turbine outlet flange ( M8 x 1.25mm thread size ).
SiMo-nodular cast iron rear housing.
M14 x 1.5mm coolant fitting port thread.
7/16”-24 oil feed fitting with in-built restrictor MUST BE USED.
38mm bolt centre turbo drain plate with M8 x 1.25mm thread size.
Internal wastegate with 8.7PSI spring.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

54mm 71mm 73.79mm .60 53.9mm 47mm 0.64 or 0.86

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
Nissan S14 / S15 2 bolt Nissan S14 / S15 3 bolt T25 / T28 5 Bolt External wastegate with 8.7PSI actuator

.64 Rear Housing

Part No Description
AF8005-2007 Natural Cast

Spare parts ( all sold separately )

Part No Description
AF9557-0001 Turbine inlet gasket (single layer)
AF9557-1001 Multi-layer turbine inlet gasket
AF30-1001 Nissan S13 oil and water line kit
AF30-1002 Nissan S14 / S15 oil and water line kit
AF8059-0010
AF8059-0001
7/16”-24 to -4AN oil feed fitting with in-built restrictor
Turbo drain gasket
.86 Rear Housing
AF9557-1011 5 bolt turbine exhaust gasket multi-layer
AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange Part No Description
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF9551-0005 Stainless steel 5 bolt turbine outlet flange AF8005-2008 Natural Cast
AF9551-0001 Turbine inlet flange stainless steel (CNC machined)
AF8050-1021 Billet Actuator (14 PSI spring installed)

360 aeroflowperformance.com
 5862 TURBOS

BOOSTED 5862 XR6

Recommended horsepower rating: 400 - 750HP
Recommended engine displacement: 2.5L to 4.5L

Dual ceramic ball bearing

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
Standard 5 bolt XR6 turbine outlet flange.
T3 single entry turbine inlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor (Warranty VOID if not used)
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
Suits both Ford XR6 BA/BF and FG. Turbo housing will be supplied in
FG configuration.
Billet Internal wastegate actuator with 9 PSI spring ( different rate springs
sold separately ).
Internal wastegate hole size is 32mm.
New boost reference port is required for this turbocharger. Install boost
reference port into front compressor cover or intercooler piping to suit the
OEM boost controller.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

58mm 76.2mm 80.42mm .60 68mm 62.3mm 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2” Slip fit T3 XR6 5 Bolt 32mm internal wastegate with 9PSI actuator

Spare parts ( all sold separately )

Part No Description
AF30-1000 Ford XR6 BA BF oil line feed
AF30-1005 Ford XR6 FG oil line feed
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF9557-0005 Single layer turbine inlet gasket
AF9557-1002 Multi-layer turbine inlet gasket
AF732-06 M14x1.5mm coolant fitting
1.06 XR6 Rear Housing AF8059-0010
AF8059-0001
7/16”-24 to -4AN oil feed fitting with in-built restrictor
Turbo drain gasket
AF9557-1010 5 bolt turbine exhaust gasket multi-layer
Part No Description AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange
AF8005-3013 Natural Cast AF9551-0002 Turbine inlet flange stainless steel
AF8005-3013BLK Hi Temp Black

aeroflowperformance.com 361
 6662 TURBOS

BOOSTED 6662 XR6

Recommended horsepower rating: 425 - 825HP
Recommended engine displacement: 2.5L to 4.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010).
SiMo-nodular cast iron rear housing.
Standard 5 bolt XR6 turbine outlet flange.
T3 single entry turbine inlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor.
(Warranty VOID if not used).
38mm bolt centre turbo drain flange with M8 x 1.25mm thread size.
Suits both Ford XR6 BA/BF and FG.
Billet Internal wastegate actuator with 9 PSI spring.
( different rate springs sold separately ).
Internal wastegate hole size is 32mm.
New boost reference port is required for this turbocharger.
Install boost reference port into front compressor cover or
intercooler piping to suit the OEM boost controller.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

66mm 82mm 86mm .72 68mm 62.3mm 1.06

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T3 XR6 5 Bolt 32mm internal wastegate with 9PSI actuator

1.06 XR6 BA / BF
ONLY Rear
Housing

Part No Description
AF8005-3014 Natural Cast
AF8005-3014BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF30-1000 Ford XR6 BA BF oil line feed
AF30-1005 Ford XR6 FG oil line feed
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF9557-0005 Single layer turbine inlet gasket
AF9557-1002 Multi-layer turbine inlet gasket 1.06 XR6 FG ONLY
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor Rear Housing
AF8059-0001 Turbo drain gasket
AF9557-1010 5 bolt turbine exhaust gasket multi-layer
AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange
Part No Description
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange AF8005-3024 Natural Cast
AF9551-0002 Turbine inlet flange stainless steel AF8005-3024BLK Hi Temp Black

362 aeroflowperformance.com
 6762 TURBOS

BOOSTED 6762 XR6

Recommended horsepower rating: 550-1000HP
Recommended engine displacement: 2L to 5.5L

Dual ceramic ball bearing.

Billet aluminium compressor wheel.
Ported shroud compressor cover.
Speed sensor port included in compressor cover.
(Speed sensor sold separately AF8050-1010)
SiMo-nodular cast iron rear housing.
Standard 5 bolt XR6 turbine outlet flange.
T3 single entry turbine inlet flange.
M14 x 1.5mm coolant port thread.
7/16”-24 oil feed fitting with in-built restrictor (Warranty
VOID if not used)
38mm bolt centre turbo drain flange with M8 x 1.25mm
thread size.
Suits both Ford XR6 BA/BF and FG.
Billet Internal wastegate actuator with 9 PSI spring.
(different rate springs sold separately)
Internal wastegate hole size is 32mm.
New boost reference port is required for this
turbocharger.
Install boost reference port into front compressor cover or
intercooler piping to suit the OEM boost controller.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

COMPRESSOR TURBINE

Inducer Exducer Extended Tip A/R Inducer Exducer A/R

67mm 84mm 87.5mm .72 68mm 62.3mm 1.15

Compressor Inlet Compressor Outlet Turbine Inlet flange Turbine Outlet flange Wastegate
4” Slip fit 2.5” Slip fit T3 XR6 5 Bolt 32mm internal wastegate with 9PSI actuator

1.15 XR6 BA / BF ONLY Rear Housing 1.15 XR6 FG ONLY Rear Housing
Part No Description Part No Description
AF8005-3018 Natural Cast AF8005-3028 Natural Cast
AF8005-3018BLK Hi Temp Black AF8005-3028BLK Hi Temp Black

Spare parts ( all sold separately )

Part No Description
AF30-1000 Ford XR6 BA BF oil line feed
AF30-1005 Ford XR6 FG oil line feed
AF463-01 or AF463-05 Turbo drain adapter (-10 ORB or -10AN)
AF9557-0005 Single layer turbine inlet gasket
AF9557-1002 Multi-layer turbine inlet gasket
AF732-06 M14x1.5mm coolant fitting
AF8059-0010 7/16”-24 to -4AN oil feed fitting with in-built restrictor
AF8059-0001 Turbo drain gasket
AF9557-1010 5 bolt turbine exhaust gasket multi-layer
AF8059-1000 Stud and Nut fitting kit for 5 bolt turbine outlet flange
AF8059-1001 Stud and Nut fitting kit for turbine inlet flange AF8005-3018 AF8005-3028BLK
AF9551-0002 Turbine inlet flange stainless steel

aeroflowperformance.com 363
 TURBO ACCESSORIES

TURBINE HOUSINGS

AF8050-1000 AF8050-1003 AF8050-1002 AF8050-1001

AF8050-1031

AF8050-1005
AF8050-1006 AF8050-1007
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

Part Number A/R Material Turbine Turbine Inlet Turbine Outlet Turbine Suits
Inet V-Band / Flange Flange Outlet V-band
AF8050-1000 0.82 304 S/S V-Band AF8080-1010 V-Band AF8080-1000 Boosted Turbo 5862, 6662
AF8050-1001 1.01 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 5862, 6662
AF8050-1002 1.31 Cast Iron V-Band AF8080-1011 V-Band AF8080-1012 Boosted Turbo 7588 , 8888
AF8050-1003 0.81 Cast Iron T4 AF9551-0003 V-Band AF8080-1003 Boosted Turbo 6766
AF8050-1005 0.83 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 6762
AF8050-1006 1.01 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 6762
AF8050-1007 0.83 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 5455 , 5855
AF8050-1008 1.01 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 5455 , 5855
AF8050-1009 1.16 Cast Iron V-Band AF8080-1021 V-Band AF8080-1001 Boosted Turbo 7072 , 7675
AF8050-1015 0.83 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 6662
AF8050-1016 0.96 Cast Iron T4 AF9551-0003 V-Band AF8080-1003 Boosted Turbo 6766
AF8050-1017 0.96 Cast Iron V-Band AF8080-1023 V-Band AF8080-1024 Boosted Turbo 7875
AF8050-1018 0.82 Cast Iron T4 AF9551-0003 V-Band AF8080-1024 Boosted Turbo 6762
AF8050-1028 0.83 Cast Iron V-Band AF8080-1016 V-Band AF8080-1000 Boosted Turbo 6766
AF8050-1029 1.16 Cast Iron V-Band AF8080-1021 V-Band AF8080-1001 Boosted Turbo 8077
AF8050-1030 1.06 Cast Iron T3 AF9551-0002 5 Bolt Ford XR6 N/A Boosted Ford XR6 turbochargers
AF8050-1031 1.15 Cast Iron T3 AF9551-0002 5 Bolt Ford XR6 N/A Boosted Ford XR6 turbochargers
AF8050-1032 1.25 Cast Iron T4 AF9551-0003 V-Band AF8080-1005 Boosted 7588, 8888
AF8050-1033 1.22 Cast Iron V-Band V-Band Boosted 94103
AF8050-1034 0.64 Cast Iron T25-T28 AF9551-0001 5 Bolt Nissan AF9551-0005 Boosted 4628 & 5428

NOTE: Cast Iron is SiMo-nodular cast iron.

TURBO BAGS / BLANKETS

The Aeroflow Performance turbo bag / blanket range provides high quality material selection, design, and construction, whilst at an affordable price. The turbo
bag isolates the heat produced by your turbocharger. This will prevent that heat from damaging components surrounding the turbocharger within your engine
compartment such as wiring, hoses and plastics. When the heat is isolated in the turbocharger it improves turbocharger efficiency by keeping the exhaust gases
hot. Resulting in faster spool up of the turbocharger and thus less turbo lag and a more linear power curve.
Available in three different options black , titanium and carbon.

STANDARD SERIES CARBON SERIES

High Temp Carbon material
High temp silica material rated to Rated to 1370oC (2500oF) internal
1370oC (2500oF) internal & and 1000oC (1832oF) external
600oC (1100oF) external

Part No Description - To Suit

BLACK SERIES Part No Description - To Suit
AF91-1006 Suit GT25 / GT28 Internal gate
AF91-1002 Suit GT30-35/GT40 External gate AF91-8806 Suit GT25 / GT28 Internal gate
AF91-1004 Suit T04 & GT42 External gate AF91-8802 Suit GT30-35/GT40 External gate
AF91-1005 Suit GT45/GT47 External gate AF91-8804 Suit T04 & GT42 External gate
AF91-8805 Suit GT45/GT47 External gate

364 aeroflowperformance.com
 TURBO ACCESSORIES

TURBO SPECIFIC V-BAND CLAMPS

These V-band clamps are designed especially for use with Boosted turbochargers. They are made in 304 stainless steel or aluminium.
Note: Moly grease all threads before installation and removal.

AF8080-1000
AF8080-1001 AF8080-1002 AF8080-1003 AF8080-1004 AF8080-1005 AF8080-1006
All V-bands kits come
with outer clamp.

AF8080-1007 AF8080-1008 AF8080-1009 AF8080-1010 AF8080-1012 AF8080-1013 AF8080-1014 AF8080-1015

Part no ID OD Material Description Suits

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF8080-1000 76.2mm ( 3” ) 90.2mm ( 3-1/2”) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbos 5455, 5855, 5862, 6662, 6762
AF8080-1030 76.2mm ( 3” ) 90.2mm ( 3-1/2”) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbine Housing AF8050-1000,
AF8080-1031 76.2mm ( 3” ) 304 stainless steel Turbine Outlet CLAMP ONLY AF8050-1001, AF8050-1004, AF8050-1005
AF8050-1006, AF8050-1007, AF8050-1008
AF8050-1018
AF8080-1001 91.4mm ( 3-19/32” ) 117.3mm ( 4-39/64” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted 7075, 7675, 8077, 8075, 7875
AF8080-1002 78.2mm ( 3-5/64” ) 120.7mm ( 4-3/4” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted 8077
AF8080-1003 82.4mm ( 3-1/4” ) 92.1mm ( 3-5/8” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted 6766 , 7875 ,
Boosted Turbine Housing AF8050-1003,
AF8050-1004
AF8080-1004 82.2mm ( 3-15/64” ) 107mm ( 4-7/32” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted 6673, 6973, 7575
AF8080-1005 108.5mm ( 4-9/32” ) 146mm ( 2-7/64” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted 7588 , 8888
Boosted Turbine Housing AF8050-1002
AF8080-1006 82.2mm ( 3-15/64” ) 107mm ( 4-7/32” ) Alloy Compressor Outlet flange V-Band kit Boosted 7575 , 8075, 7588, 8888
AF8080-1007 101.6mm ( 4 “ ) 107mm ( 4-7/32” ) Alloy Compressor Outlet flange V-Band kit Boosted 94103,94102,98102, 102102,106102
AF8008-1008 115mm ( 4-33/64” ) 131mm ( 5-5/32” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted 94103,94102,98102, 102102,106102
AF8080-1009 69.85mm ( 2-3/4” ) 92.1mm ( 3-5/8” ) Alloy Compressor Outlet flange V-Band kit Boosted 7075 , 7675, 8077 , 8075, 7975
AF8080-1010 49mm ( 1-15/16” ) 76.1mm ( 3” ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbos 6662,
Boosted Turbine Housing AF8050-1000,
AF8080-1011 67mm ( 2-39/64” ) 96.5mm ( 3-51/64 ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbine Housing AF8050-1002
AF8080-1012 98mm ( 3-13/16” ) 114.3mm (4-1/2” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbine Housing AF8050-1002
AF8080-1013 82.2mm ( 3-15/64” ) 107mm ( 4-7/32” ) 304 stainless steel Compressor Outlet flange V-Band kit Boosted 7575, 8075, 7588, 8888
AF8080-1014 101.6mm ( 4 “ ) 107mm ( 4-7/32” ) 304 stainless steel Compressor Outlet flange V-Band kit Boosted 94103,94102,98102, 102102,106102
AF8080-1015 69.85mm ( 2-3/4” ) 92.1mm ( 3-5/8” ) 304 stainless steel Compressor Outlet flange V-Band kit Boosted 7075 , 7675, 8077, 8075, 7975
AF8080-1016 60mm ( 2-3/8” ) 76.1mm ( 3” ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbos 5855, 6662, 6762, 4849, 5449
AF8080-1019 68mm ( 2-43/64” ) 91.4mm ( 3-19/32” ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbos 7375, 7975
AF8080-1020 85mm ( 3-11/32” ) 109.2mm ( 4-19/64” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbos 7375, 7975
AF8080-1021 66.5mm ( 2-39/64” ) 96.52mm ( 3-51/64” ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbos 7075, 7675,
AF8080-1023 66mm ( 2-33/64” ) 91.4mm ( 3-19/32” ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbos 7875
AF8080-1024 76.1mm ( 3” ) 91.4mm ( 3-19/32” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbos 7875
AF8080-1025 92mm ( 3-5/8” ) 76.1mm ( 3” ) 304 stainless steel Compressor Outlet flange V-band Kit Boosted Turbos 7575, 8075, 7588, 8888
AF8080-1026 86.2mm ( 3-25/64” ) 117mm ( 4-19/32” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbos B7875, 7885
AF8080-1027 85mm ( 3-11/32” ) 117.4mm ( 4-5/8” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbos 7575, 8075, with 1.10 A/R
AF8080-1028 104mm ( 4-3/32” ) 120.5mm ( 4-47/64” ) 304 stainless steel Turbine Inlet flange V-band Kit Boosted Turbos 94103
AF8080-1029 79.5mm ( 3-1/8” ) 107.95mm ( 4-1/4” ) 304 stainless steel Turbine Outlet flange V-band Kit Boosted Turbos 94103

TITANIUM SERIES AF91-8006 DIRECT FIT TURBO BAGS

High temp titanium material rated Part No Description - To Suit
to 1370oC (2500oF) internal &
1370oC (2500oF) external
STANDARD SERIES
AF91-1000 Ford XR6 BA / BF / FG or GT30/GT35 with internal gate
AF91-1001 Subaru with VF turbocharger internal gate

TITANIUM SERIES
AF91-8000 Ford XR6 BA / BF / FG or GT30/GT35 with internal gate
AF91-8010 R35 GTR ( sold as pair )
AF91-8001 Subaru with VF turbocharger internal gate
AF91-8011 Mitsubishi Evolution 7-9 ( 4G63 )
Part No Description - To Suit
CARBON SERIES
AF91-8006 Suit GT25 / GT28 Internal gate AF91-8800 Ford XR6 BA / BF / FG or GT30/GT35 with internal gate
AF91-8002 Suit GT30-35/GT40 External gate AF91-8810 R35 GTR ( sold as pair )
AF91-8004 Suit T04 & GT42 External gate AF91-8801 Subaru with VF turbocharger internal gate
AF91-8005 Suit GT45/GT47 External gate AF91-8811 Mitsubishi Evolution 7-9 ( 4G63 )

aeroflowperformance.com 365
 TURBO ACCESSORIES

TURBO BREAK IN LUBRICANT

The Aeroflow Performance turbo break in lubricant is specifically designed
to provide sufficient lubrication to a newly installed turbo whether new,
rebuilt or second hand turbo. The initial start can be a killer there is always WATER INLET - OUTLET
a delay in oil supply reaching the bearings on the turbocharger. This can
be as long as 30 seconds which is enough time to cause premature wear Part No Description
or even seizure. The Aeroflow Performance lubricant provides a high
load-bearing film that clings to all moving parts, preventing wear until a AF732-06 Male -6 to M14 X 1.5 Blue
continual oil supply reaches the turbo. AF732-06BLK Male -6 to M14 X 1.5 Black
AF732-06S Male -6 to M14 X 1.5 Silver
AF733-06 Male -6 to M16 X 1.5 Blue
Part No Description AF733-06BLK Male -6 to M16 X 1.5 Black
AF8080-2000 Turbo break in lubricant AF733-06S Male -6 to M16 X 1.5 Silver
AF734-06 Male -6 to M18 X 1.5 Blue
AF734-06BLK Male -6 to M18 X 1.5 Black

TURBO FITTINGS AF734-06S Male -6 to M18 X 1.5 Silver

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF341-03 AF380-03

AF8059-0010
AF30-1005

AF30-1004

AF8059-0011

AF463-08
OIL FEED
Part No Description
AF341-03 Male inverted flare 7/16” - 24 SAE
AF341-04 Male inverted flare 7/16” - 24 SAE
AF380-03 1/8”NPT to - 3AN
AF380-04 1/8”NPT to - 4AN
AF380-04-03 1/4”NPT to -3AN AF30-1000
AF380-04-04 1/4”NPT to -4AN
AF380-02-06 1/8”NPT to - 6AN
AF380-04-06 1/4”NPT to - 6AN
AF8059-0010 suits Boosted turbos with 7/16-24 oil feed

AF8059-0011
( built in restrictor ) to -4AN stainless steel
suits Boosted turbos with 38mm bolt centre female
TURBO OIL FEED LINE KITS
1/4” NPT plate and male 1/4” NPT to -4AN ( built in Includes -3AN 200 series stainless steel teflon oil feed lines
restrictor ) stainless steel
AF8059-1012 suits Boosted turbos with 1/4” NPT oil feed fitting Part No Description - To Suit
male -4AN (built-in restrictor) stainless steel. AF30-1000 Ford XR6 BA-BF includes 40 micron filter
AF463-08 suits turbochargers with 38mm bolt centre with -4AN (Turbo feed line only)
AF463-26 suits turbochargers with 38mm bolt centre with -6AN AF30-1005 Ford XR6 FG Turbo feed line kit with 40 micron filter
AF30-1004 universal turbo oil feed line F6 requires AF359-04 (M12x1.5 to -4AN)
AF30-1004 Universal line kit (Turbo feed line only)
Comes with M12 x 1.25, M12 x 1.5, 7/16”-24

366 aeroflowperformance.com
 TURBO ACCESSORIES

AF30-1002

AF30-1003

TURBO OIL / WATER FEED LINE KITS

Includes -3AN 200 series stainless steel teflon oil feed lines

Part No Description - To Suit

AF30-1001 Nissan SR20 S13
AF30-1002 Nissan SR20 S14 / S15
AF30-1003 Nissan RB20, RB25, RB26, RB30.
(Note RB20 & RB30 require additional oil feed banjo)

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF30-1001

TURBO INLINE OIL FILTERS

This CNC machined filter features a large surface area cone design stainless
steel 30 micron element that can be easily cleaned to maintain an efficient
fuel or oil system. Great for turbo charger oil feed lines to stop debris from
entering your turbo’s core. 76mm (3”) length body 25.4mm (1”) O.D.

AN Blue Black Silver

-3 AF607-03 AF607-03BLK AF607-03S
-4 AF607-04 AF607-04BLK AF607-04S
-6 AF607-06 AF607-06BLK AF607-06S

FORD XR6 TURBO LINE SUPPORT

The Aeroflow Performance turbo and water line support bracket is designed
1mm (3/64”) TURBO RESTRICTOR
for the turbocharged Ford Barra motor to secure the turbo oil and water Ideal for use with bearing turbos. These great little restrictors restrict the oil
feed lines from falling onto the drive belt. A quick and easy bolt on design flow/pressure to the core of the turbo to ensure long life of your seals. They
that utilises the 2 front timing case bolts on the front of the engine. This kit suit Aeroflow’s -3AN and -4AN 200 series fittings. Recommended for use in all
comes with two sets of different sized billet separators to suit most custom Boosted ball bearing turbo chargers.
applications. One set is stepped with I.D’s of 11.1mm (7/16”) and 14.2mm
(9/16”) and the second set has an I.D. of 14.2mm (9/16”) on both sides.
Overall Length = 270mm (10-5/8”) Part No Description
Overall Width = 44mm (1-47/64”)
Thickness = 4mm (5/32”) AF399-03 Suits -3AN teflon hose 10 Pack
AF399-04 Suits -4AN teflon hose 10 Pack

Part No Description
AF64-4369 Turbo water and oil feed line support bracket for
Ford XR6 turbo.

aeroflowperformance.com 367
 TURBO ACCESSORIES

TURBO DRAIN KITS

This selection of turbo drain options available from Aeroflow Performance will allow a large range custom plumbing applications. For sufficient drainage of oil for
both bearing styles of turbochargers a -10AN or 5/8” hose is ideal. The oil outlet should follow the direction of gravity +/-45° when installed in the vehicle on level
ground. It is recommended to avoid kinks or beyond 90 degree bends in the oil drain line and draining into the sump below. With heat surrounding the manifold and
turbocharger a heat shield or sleeve is a great idea to prolong the life of the hose.

AF463-14 AF463-10 AF463-11 AF463-15

AF463-12 AF463-16

BOLT CENTRE

AF463-01
AF463-02

AF463-03

AF463-09 AF463-13
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF463-05L

AF463-05 AF926-10-08BLK
AF463-06 AF463-06L
AF463-06

Part No Description
AF463-01 -8ORB female 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-02 -10ORB female 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF463-03 -10ORB female 52.40mm hole centres suits Boosted turbos with 52.40mm bolt centres on turbo drain
AF463-05 -10AN male 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-05L -10AN male 3” ( 75mm ) long tube with 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-06 -10AN male 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF463-06L -10AN male 3” ( 75mm ) long tube with 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF463-07 -10AM male 52.40mm hole centres suits Boosted turbos with 52.40mm bolt centres on turbo drain
AF463-09 16mm barb ( 100mm long ) with 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-10 -12AN male AN with 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-11 -10AN male extension 1.5” ( 38mm ) with 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-12 -10AN male 45 degree swivel with 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-13 19mm Barb ( 100mm long ) with 38mm to 44mm hole centres suits Boosted turbos with 38mm bolt centres on turbo drain
AF463-14 -12AN male AN with 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF463-15 -10AN male extension 1.5” ( 38mm ) with 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF463-16 -10AN male 45 degree swivel with 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF463-17 19mm Barb ( 100mm long ) with 50.80mm hole centres suits Boosted turbos with 50.80mm bolt centres on turbo drain
AF926-10-08BLK -8ORB to 16mm barb ( 100mm OAL )
AF926-10-10BLK -10ORB to 16mm barb ( 100mm OAL )
AF926-12-08BLK -8ORB to 19mm barb ( 100mm OAL )
AF926-12-10BLK -10ORB to 19mm barb ( 100mm OAL )
AF926-16-08BLK -8ORB to 22mm barb ( 100mm OAL )
AF926-16-10BLK -10ORB to 22mm barb ( 100mm OAL )

AF8059-0001 AF8059-0002 AF8059-0003 TURBO DRAIN HOSE

TURBO DRAIN GASKETS This fluorosilicone lined 3 ply silicone hose has been designed for the
connection between the turbocharger and the engine. It is the next best
Aeroflow Performance turbo drain gaskets to properly seal your turbo system to alternative to using steel braided hose but it allows better flexibility in line
help prevent unnecessary surprises at the track. This is normally only removed if length. The fluorosilicone lining in this product allows this to be used as
the turbo is removed, but an oil resistant hose. It resists hardening, cracking, steam, and coolant.
It is highly recommended that this gasket be replaced if the drain plate is Most commonly used in high heat turbo oil-drain applications rated up to
removed, or even just loosened. 257°C ( 495°F).
Available in both 5/8” ( 15.90mm ) and ¾” ( 19.10mm ) with only one
Part No Description length of 500mm.

AF8059-0001 suits boosted turbos with 38mm bolt centres on turbo drain
AF8059-0002 suits boosted turbos with 51mm bolt centres on turbo drain
Part No Description
AF8059-0003 suits Boosted turbos 6766 and 7875 AF9260-062-1 5/8” ( 15.90mm ) BLACK
AF9260-075-1 ¾” ( 19.10mm ) BLACK
368 aeroflowperformance.com
 TURBO ACCESSORIES

AF8005-1000

COMPRESSOR HOUSING O-RING

Part No Description
AF8005-1002
AF8080-5001 Replacement compressor housing O-ring to suit boosted
turbo 5455 , 5855 , 5862 , 6662 , 6762.

AF463-30

AF8005-1010

TURBO ADAPTERS

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

These Aeroflow Performance turbo adapters save the cost and headache
of manufacturing a brand new exhaust manifold or exhaust system.
Made from cast 304 stainless steel. Featuring an uninterrupted gas flow
transition to ensure optimum turbocharger response.

Part No Description
AF8055-1000 T3 to V-Band
AF8055-1001 T4 to V-Band
AF463-31
AF8055-1002 T3 to T4
AF8055-1003 T25/T28 to T3
AF463-33 AF8055-1010 Ford XR6 5 bolt turbine outlet flange to V-band
AF8055-1011 T25/T28 5 bolt turbine outlet flange to V-band

TURBO DRAIN BULKHEAD

These Aeroflow Performance universal bulkhead turbo drains are a convenient
FLEXIBLE
must have fitting for DIY enthusiast. When turbocharging a N/A engine there TURBO
isn’t much option for a turbo drain back into oil pan. This screw together bulk-
head fitting allows for easy installation with no welding required. Just remove DRAIN
the sump and drill a hole to suit and screw the fittings together with an O-ring on
each side to seal it. Aeroflow’s universal flexible turbo
drains are designed to help you quickly
Part No Description and eaisly plumb up your turbo drain.
Featuring -10 female swivel nuts at both
AF463-30 Turbo Oil Drain Pipe Adapter 45 degree with 5/8 barb ends they are easily mated to our turbo
AF463-31 Turbo Oil Drain Pipe Adapter 90 degree with 5/8 barb drains and block and sump fittings.
AF463-32 Turbo Oil Drain Pipe Adapter 45 degree with -10an male Made from 304 stainless steel to protect
AF463-33 Turbo Oil Drain Pipe Adapter 90 degree with -10an male them from turbo manifold heat.

Part No Description
AF463-35 150mm (5-29/32”) Flexible stainless steel turbo drain hose
AF463-36 200mm (7-7/8”) Flexible stainless steel turbo drain hose
AF463-37 300mm (11-13/16”) Flexible stainless steel turbo drain hose

AF463-22
TURBO STUDS
The Aeroflow Performance turbo
studs are made for mounting
turbochargers to manifolds, mounting
exhaust systems and exhaust
manifolds. These studs can fail
during removal and reinstallation
due to the extreme heat and stress.
TURBO DRAIN LINE KITS Manufactured from
steel with copper locking nuts to
provide a constant clamp load.
Part No Description
AF463-20 Ford XR6 BA / BF / FG oil drain fitting kit
AF463-21 Universal turbo drain fitting kit suits Boosted turbos with Part No Description
38-44mm bolt centres on turbo drain
AF463-22 Universal turbo drain fitting kit suits Boosted turbos with AF8059-1000 M8 x 1.25mm 5 x studs / nuts
50.80mm bolt centres on turbo drain AF8059-1001 M10 x 1.5mm 4 x studs / nuts

aeroflowperformance.com 369
 TURBO ACCESSORIES

AF8059-1051

SINGLE LAYER TURBO GASKETS AF8059-1050

Introducing the new range of turbo gaskets from Aeroflow Performance.
These single layer gaskets are designed to suit T28 inlet turbo flange
single entry and T3, T4, T5 turbo twin entry inlet flanges.
LOCKING TABS
Part No Description The Aeroflow Performance stainless steel turbo locking tabs are critical
in keeping your turbo nuts in their place and stopping them from coming
AF9557-0001 GT25, GT28, Turbine inlet flange (T28) loose. The factory items are typically damaged from the heat of the turbo
AF9557-0005 GT30, GT35, Turbine inlet flange (T3) single entry after a number of years so it’s a good idea when you’ve got the turbo off,
AF9557-0002 GT30, GT35, Turbine inlet flange (T3) twin entry to replace these at the same time. To install simply bend up the ends of
AF9557-0006 TO4Z, GT42, GT45,Turbine inlet flange (T4) single entry the tabs against the turbo nuts to keep them in their place.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF9557-0003 TO4Z, GT42, GT45,Turbine inlet flange (T4) twin entry Sold in pairs
AF9557-0004 GT42, GT45, GT51 turbine inlet flange (T6) twin entry
Part No Description
AF8059-1050 Suits T25 / T28 turbine flanges
AF8059-1051 Suits T3 turbine flanges

AF9557-1001 AF9557-1002

AF9557-1003

AF9557-1006 AF9557-1010

AF9557-1007

AF9557-1011

MULTI-LAYER TURBO GASKETS

The Aeroflow Performance multi-layer turbine inlet flange are designed
to provide the best quality seal at the most competitive price. With each
individual layer designed to be thinner this delivers increased rigidity and
durability. A uniform heat distribution which improves thermal transfer be-
tween the turbocharger and manifold. All whilst providing an even distribu-
tion of clamping loads across the entire sealing surface. They are available
in all sizes from T25/T28 all the way up to T6 for the turbine inlet flanges &
the Nissan 5 bolt and Ford 5 bolt turbine outlet flange gaskets.

Part No Description CAST ELBOWS

The Aeroflow Performance tight radius cast aluminium 90 degree elbow
AF9557-1001 GT25 GT28 turbine inlet flange T25 / T28 is perfect for those who wish to weld an extension on to their compressor
AF9557-1002 GT30 GT35 turbine inlet flange T3 single entry housings. The compact design is great for tight bend turns in the pipe
AF9557-1003 GT42 GT45 turbine inlet flange T4 twin entry work application. The extra lip helps to keep your silicone secured. All
AF9557-1006 GT42 GT45 turbine inlet flange T4 single entry Cast elbows have a 3mm (1/8”) wall thickness
AF9557-1007 GT45 GT51 GT55 turbine inlet flange T6 twin entry
AF9557-1010 Ford XR6 5 bolt turbine outlet flange Part No Description
AF9557-1011 GT25 GT28 turbine outlet flange T25 / T28
AF8803-200 2” ( 50.8mm )
AF8803-225 2-1/4” ( 57mm )
AF8803-250 2-1/2” ( 63mm )
AF8803-275 2-3/4” ( 70mm )
AF8803-300 3” ( 76 mm )

370 aeroflowperformance.com
 TURBO ACCESSORIES

COMPRESSOR WHEEL SPEED SENSOR

The Aeroflow Performance speed sensor detects the rotational speed of
compressor wheel of the turbocharger. Sensing is done by the Eddy Current
Principle to detect the blades as they pass by. By doing so, it provides a key
input parameter for the efficient management of the turbocharging system.
This is critical in accurately identifying how fast the turbo is spinning and
where your engine is operating on the compressor map. By comparing
boost levels and shaft speed on a compressor map, you can determine
the ideal operating conditions to insure peak power over a wider operating
range.
Traditionally, installing these sensors was difficult for the end user –
requiring complex machining at a compound angle to carefully hit the
contour area of the wheel bore at the right angle. The Boosted by Aeroflow

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

turbochargers all have this precision machining already done to every
compressor cover.
Maximum speed of measurement is 400,000 RPM.

BELLMOUTHS
Part No Description Aeroflow Performance’s Bellmouth-style velocity stacks are ideal for achieving
maximum air velocity. Manufactured out of spun aluminium, these lightweight
AF8050-1010 compressor speed sensor ONLY
Bellmouth velocity stacks increase the volume of air at your compressor inlet.
AF8050-1051 speed sensor plug
They come in polished and black anodized so they look awesome under
AF8059-0020 speed sensor locking nut & plug
the bonnet and you can chose between three sizes to meet your application
needs. 76mm (3”) & 102mm (4”) bellmouth has a 152.4 mm ( 6” ) O.D. so you
can run an Aeroflow pod filter or turbo protector screen.

Part No Colour Description

AF64-4070 Polished 76mm (3”) inlet
AF64-4070BLK Black 76mm (3”) inlet
AF64-4071 Polished 101mm (4”) inlet
AF64-4071BLK Black 101mm (4”) inlet
AF64-4073 Polished 127mm (5”) inlet
AF64-4073BLK Black 127mm (5”) inlet
AF64-4072 Polished 152mm (6”) inlet
AF64-4072BLK Black 152mm (6”) inlet

COMPRESSOR WHEEL SPEED SENSOR KIT

The Boosted speed sensor kit offers the ability to monitor the inner workings
of your turbocharger to insure longer life and maximum performance. By
constantly monitoring your turbochargers shaft speed through either a data
logger or the speed sensor gauge, you acquire a more complete picture of
your turbochargers performance.
The data gained from this kit can be used to closely determining if the
turbocharger is reaching its maximum performance. Whether that can be
used for selecting the right turbocharger for your engine combination and/
or insuring that it is not over speeding, allowing you to avoid potentially
damaging operating conditions.
The Boosted speed sensor gauge displays turbo speed data in real time
with a 128×64 pixel graphical display with warning outputs at over speed. It
CARBON BELLMOUTHS
provides maximum speed recall function which will retain the highest wheel Aeroflow Performance Bellmouth-style velocity stacks are ideal for achieving
speed for five minutes for easy mapping. maximum air velocity. Manufactured out of carbon fibre, these lightweight
It is a compact 52mm ( 2-1/16″ ) circular gauge that can be easily attached to bellmouth velocity stacks increase the volume of air at your compressor inlet.
your A-pillar, dash, or any universal gauge pod. 101mm (4”) bellmouth has a 152.4 mm ( 6” ) O.D. so you can run an Aeroflow
The Boosted speed sensor kit includes the Aeroflow Performance speed pod filter or turbo protector screen.
sensor ( AF8050-1010 ), wiring harnesses, installation instructions and turbo
speed gauge. Part No Finish Description
AF64-4971 Carbon fibre 101mm (4”) inlet
Part No Description
AF8050-1050 complete kit with gauge / wiring / sensor

aeroflowperformance.com 371
 TURBO ACCESSORIES

AF8050-1023

AF8050-1024

BILLET INTERNAL WASTEGATE

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

ACTUATORS
The Aeroflow Performance billet internal wastegate actuator is designed
to provide better turbo response, stable boost control and better
management of boost pressures. This billet actuator is constructed from
high grade aluminium with stainless steel adjustable rod and connecting

TURBO PROTECTOR SCREENS clevis for corrosion resistance which makes it a much stronger and more
reliable replacement for any OEM application. The ability to interchange
for various spring pressures are great for any application to suit a range
Protect your turbocharger and engine internals from debris at the track or on of boost pressures.
the road. These stainless honeycomb turbo guards cover your turbo’s inlet to Dimensions :
stop rocks and rubber damaging your impeller and engine. Body length = 75mm (2-61/64”)
body diameter = 67mm (2-5/8”)
Part No Description rod actuator adjust length = 138mm to 160mm (5-7/16” to 6-19/64”)
5 mm (13/64”) barb
AF64-4074 101.6mm (4” ) I.D. Suits turbos with 4” front covers
AF64-4075 127mm (5”) I.D. Suits turbos with 5” front covers
AF64-4077 139.7mm (5.5”) I.D. Suits turbos with 5.5” front covers Part No Description - To Suit
AF64-4076 152.4mm (6”) I.D. Suits turbos with 6” front covers
Bolt on Ford XR6 BA / BF /FG Actuator
AF8050-1023 9 psi spring suits Boosted 5862
AF8050-1024 9 psi spring suits Boosted 6662 & 6762
AF8050-1020 14 psi spring suits Boosted 6662 & 6762

T25 / T28 Actuator

AF8050-1021 14psi spring

Universal Actuator
AF8050-1022 14psi spring

Actuator Replacement Diaphragm

AF8059-1025 Replacement diaphram and disc to suit all billet
internal actuators

Springs Sold Separately

Part No. Spring PSI Colour
AF8050-1011 7psi spring Yellow
AF8050-1012 9psi spring White
AF8050-1013 14psi spring Blue
AF8050-1014 20psi spring Green

372 aeroflowperformance.com
 WASTEGATES & ACCESSORIES

EXTERNAL WASTEGATE
Aeroflow Performance wastegates are designed to control the turbochargers
boost by bypassing turbine inlet exhaust gas via a spring loaded valve
diaphragm assembly. Spring rate, in conjunction with boost pressure signal
and back pressure, control the opening point of the wastegate valve. Once
the spring rate has been overcome, the valve will open. This causes exhaust
flow to be diverted away from the turbine side of the turbocharger, effectively
slowing and/or stabilizing the turbines wheel speed. This stabilization results
in a smooth and steady boost pressure level, created by the compressor
wheel of the turbocharger. Open pressure of the valve can be controlled via
spring rate and or a boost controller, such as a manual boost controller or an
electronic boost controller.
The Aeroflow Performance external wastegate features an internal valve
constructed from high temp NiCrFe based alloy. Other features include a high
temperature silicone nomex reinforced actuator diaphragm and stainless steel
actuator springs that delivers consistent boost pressure at high temperatures.
Nitronic stainless steel is used for the valve seat and valve bushing which all
offer longer product life at extreme temperatures.
Aeroflow Performance wastegates ( 38mm,44mm only ) feature water
cooling ports ( 2 x M8x1.0mm ) for those heavy duty applications. These are
optional and can be disregarded if not required. There are also three lower
o2 pressure ports and two top O2 pressure ports ( 5 x M10x1.00mm ) for
easy installation this eliminates the need to rotate the actuator top hat, two
stainless steel plugs and gaskets are included for unused lower air ports.
Included in the kit for the water cooling ports are two stainless steel fittings
and gaskets to a -4AN, for the O2 ports two fittings and gaskets to -4AN both
are stainless steel. Two banjo bolts in stainless steel and alloy banjo’s with

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

gaskets are included for a barb option to use a rubber/silicone 6mm vacuum
hose.
Aeroflow Performance wastegates come pre-set to 1 bar ( 14.7 PSI ). This
can easily be altered by purchasing and installing springs from Aeroflow’s
accessory spring range. The wastegate also includes required stainless steel
hardware for installation which includes : valve seat, inlet V-band clamp/
flange and outlet V-band clamp/flange.

Part No Colour Description

AF9552-1000 Black 38mm (1-1/2”) wastegate
AF9552-1001 Black 44mm (1-47/64”) wastegate
AF9552-1003 Black 60mm (2-23/64”) wastegate

WASTEGATE SPARE PARTS

Part No Size Description

AF9552-1200 Air port block off plug suit all wastegates M10 x 1mm
Sold individually
AF9552-1201 Water fitting to -4AN suits 38mm & 44mm wastegates
M8 x 1mm. Sold individually

AF9552-1300 38mm Diaphragm replacement kit

AF9552-1301 38mm Outlet flange weld on flange only
AF9552-1302 38mm Outlet v-band clamp
AF9552-1303 38mm Inlet flange weld on flange only
AF9552-1304 38mm Inlet v-band clamp
AF9552-1305 38mm Inlet seat valve seat only

AF9552-1400 44mm Diaphragm replacement kit

AF9552-1401 44mm Outlet flange weld on flange
AF9552-1402 44mm Outlet v-band clamp AF9552-1201
AF9552-1403 44mm Inlet flange weld on flange
AF9552-1404 44mm Inlet v-band clamp
AF9552-1405 44mm Inlet seat valve seat

AF9552-1600 60mm Diaphragm replacement kit

AF9552-1601 60mm Outlet flange weld on flange
AF9552-1602 60mm Outlet v-band clamp
AF9552-1603 60mm Inlet flange weld on flange
AF9552-1604 60mm Inlet v-band clamp assembly AF9552-1305 AF9552-1304
AF9552-1605 60mm Inlet seat valve seat

AF9552-1302
AF9552-1301

AF9552-1200

AF9552-1303
AF9552-1400 AF9552-1600
aeroflowperformance.com 373
 WASTEGATES & ACCESSORIES

WASTEGATE SPRINGS
The Aeroflow Performance wastegate has a variety of springs to suit differ-
ent boost levels. Pre-installed with 1 Bar ( 14psi ). Different spring combina-
tions may be required to suit different boost requirements and tuning which
are sold separately please refer to chart for more information on these
springs. The tuner can use combinations of up to 3 springs to achieve the
base boost pressures required. To aid in the identification of these springs
they are colour coded. When selecting your spring rate, the total boost psi
pressure is determined by adding the spring rates together.
Wastegate spring selection will determine the minimum and maximum boost Replacement Inner Springs
pressure that you want to run, and your control method. Care should be tak- AF9552-1101 Yellow All W/gates
en when selecting boost pressures until the engine can be run on a dyno to AF9552-1102 Green All W/gates
ensure safety. Always consult an expert when making boost changes, and Replacement Middle Springs
it is recommended that the car be checked on a dyno, as high boost and/or AF9552-1103 Red For correct spring 38, 44mm
lean air/fuel mixtures can cause engine damage or worse, total failure. AF9552-1106 White selection please refer 38, 44mm
AF9552-1104 Blue to the following charts 38, 44mm
AF9552-1105 Black 38, 44mm
Replacement Outer Springs
AF9552-1107 Brown 44mm
AF9552-1109 Blue 60mm
38mm
38mm
38mm WASTEGATE SPRINGS AF9552-1108 Green 60mm

PART NUMBER
PART NUMBER AF9552-1102
AF9552-1102 AF9552-1101
AF9552-1101 AF9552-1104
AF9552-1104 AF9552-1103
AF9552-1103 AF9552-1106
AF9552-1106 AF9552-1105
AF9552-1105
FREE LENGTH PARTPART
NUMBER
FREE LENGTH 62.80mm 62.80mm 64.70mm 64.70mm 87.74mm
87.74mm 91.00mm
91.00mm 92.11mm
92.11mm 102.90mm
102.90mm NUMBER
OUTSIDE DIAMETER 28.80mm 29.25mm 38.30mm 37.70mm 47.80mm 48.30mm FREEFREE
LENGTH
LENGTH
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

OUTSIDE DIAMETER 28.80mm 29.25mm 38.30mm 37.70mm 47.80mm 48.30mm

SPRINGSPRING
PRESSURE 6 PSI ( 0.41 BAR ) 10.10 PSI ( 0.69 BAR ) 11.20 PSI ( 0.77 BAR ) 7.80 PSI ( 0.53 BAR ) 10.30 PSI ( 0.71 BAR ) 12.60 PSI ( PSI
0.87( 0.87
BAR BAR
) OUTSIDE DIAMETER
OUTSIDE DIAME
PRESSURE 6 PSI ( 0.41 BAR ) 10.10 PSI ( 0.69 BAR ) 11.20 PSI ( 0.77 BAR ) 7.80 PSI ( 0.53 BAR ) 10.30 PSI ( 0.71 BAR ) 12.60 )
SPRINGSPRING
LOCATION INNER INNER INNERINNER MIDDLE MIDDLE MIDDLE OUTER SPRING PRESSURE
SPRING PRESSU
LOCATION MIDDLE MIDDLE MIDDLE OUTER
SPRINGSPRING
COLOUR SPRING LOCATION
COLOURDARK GREEN
DARK GREENYELLOW YELLOW LIGHTLIGHT
BLUE BLUE RED RED WHITEWHITE BLACK
BLACK SPRING LOCATIO
PSI SPRING COLOUR
PSI BAR BAR SPRING COLOUR
6 PSI PSI BARBAR
6 0.34 0.34 AF9552-1102
AF9552-1102
8 8 0.55 0.55 AF9552-1103
AF9552-1103 8.5 8.5 0.580.58
10 10 0.69 0.69 AF9552-1101
AF9552-1101 10 10 0.690.69
11 11 0.76 0.76 AF9552-1104
AF9552-1104 11 11 0.760.76
12 12 0.82 0.82 AF9552-1105
AF9552-1105 14 14 0.960.96
14 14 0.96 0.96 AF9552-1102
AF9552-1102 AF9552-1103
AF9552-1103 16 16 1.1 1.1
16 16 1.1 1.1 AF9552-1102
AF9552-1102 AF9552-1106
AF9552-1106 17 17 1.171.17
17 17 1.17 1.17 AF9552-1102
AF9552-1102 AF9552-1104
AF9552-1104 22 22 1.511.51
18 18 1.24 1.24 AF9552-1101
AF9552-1101 AF9552-1103
AF9552-1103 24.524.5 1.691.69
20 20 1.38 1.38 AF9552-1103
AF9552-1103 25.525.5 1.761.76
21 21 1.44 1.44 AF9552-1101
AF9552-1101 AF9552-1104
AF9552-1104
22
23
24
22 1.51 1.51
23 1.59 1.59
24 1.65 1.65
AF9552-1101
AF9552-1101

AF9552-1104
AF9552-1104
AF9552-1106
AF9552-1106
AF9552-1105
AF9552-1105
AF9552-1105
AF9552-1105
AF9552-1105
AF9552-1105
60mm
60mm
26 26 1.79 1.79 AF9552-1102
AF9552-1102 AF9552-1103
AF9552-1103 AF9552-1105
AF9552-1105
29 29 1.99 1.99 AF9552-1102
AF9552-1102 AF9552-1106
AF9552-1106 AF9552-1105
AF9552-1105
30 30 2.06 2.06 AF9552-1102
AF9552-1102 AF9552-1104
AF9552-1104 AF9552-1105
AF9552-1105
33 33 2.27 2.27 AF9552-1101
AF9552-1101 AF9552-1106
AF9552-1106 AF9552-1105
AF9552-1105
34 34 2.34 2.34 AF9552-1101
AF9552-1101 AF9552-1104
AF9552-1104 AF9552-1105
AF9552-1105

44mm WASTEGATE SPRINGS

PART NUMBER AF9552-1102
PART NUMBER AF9552-1102 AF9552-1101 AF9552-1101 AF9552-1104 AF9552-1104 AF9552-1103
AF9552-1103 AF9552-1106 AF9552-1105
AF9552-1106 AF9552-1105 AF9552-1107
AF9552-1107
FREE LENGTH 62.80mm
FREE LENGTH 62.80mm 64.70mm64.70mm 87.74mm
87.74mm 91.00mm 91.00mm 92.11mm
92.11mm 102.90mm
102.90mm 79.4mm
79.4mm
OUTSIDE
OUTSIDE DIAMETER
DIAMETER 28.80mm28.80mm 29.25mm29.25mm 38.30mm
38.30mm 37.70mm 37.70mm 47.80mm
47.80mm 48.30mm
48.30mm 59mm 59mm
SPRINGSPRING
PRESSUREPRESSURE
3.8 PSI3.8 PSI BAR
( 0.23 ( 0.23) BAR
6.50) PSI
6.50 PSI BAR
( 0.34 ( 0.34) BAR ) PSI
7.20 7.20 PSI (BAR
( 0.45 0.45) BAR5 )PSI (50.31
PSI (BAR
0.31)BAR ) 6.6( 0.42
6.6 PSI PSI ( BAR
0.42 )BAR8.20
) 8.20
PSI ( PSI
0.52( 0.52
BAR BAR ) 14.5
) 14.5 PSI (PSI ( 1 BAR
1 BAR ) )
SPRINGSPRING
LOCATIONLOCATION
INNER INNER INNERINNER MIDDLEMIDDLE MIDDLE MIDDLE MIDDLE
MIDDLE OUTEROUTER OUTEROUTER
SPRINGSPRING
COLOUR COLOURGREENGREEN YELLOW YELLOW LIGHTLIGHT
BLUE BLUE RED RED WHITEWHITE BLACKBLACK BROWNBROWN
PSI PSI BAR BAR
4 4 0.27 0.27 AF9552-1102AF9552-1102
5 5 0.34 0.34 AF9552-1103
AF9552-1103
6.5 6.5 0.44 0.44 AF9552-1101
AF9552-1101
7 7 0.48 0.48 AF9552-1104
AF9552-1104
8 8 0.55 0.55 AF9552-1105
AF9552-1105
9 9 0.62 0.62 AF9552-1102AF9552-1102 AF9552-1103
AF9552-1103
10 10 0.68 0.68 AF9552-1102
AF9552-1102 AF9552-1106
AF9552-1106
11 11 0.75 0.75 AF9552-1102
AF9552-1102 AF9552-1104
AF9552-1104
12 0.82 AF9552-1102 AF9552-1103 AF9552-1105
12 0.82 AF9552-1102 AF9552-1103 AF9552-1105
13 0.89 AF9552-1101 AF9552-1103 AF9552-1106 AF9552-1105
13 0.89 AF9552-1101 AF9552-1103 AF9552-1106 AF9552-1105
14.5 1 AF9552-1104 AF9552-1107
14.5 1 AF9552-1104 AF9552-1107
15 1.03 AF9552-1101 AF9552-1105
15 1.03 AF9552-1101 AF9552-1105
18 1.24 AF9552-1102 AF9552-1103 AF9552-1105 AF9552-1107
18 1.24 AF9552-1102 AF9552-1103 AF9552-1105 AF9552-1107
19.5 1.31 AF9552-1103 AF9552-1105 AF9552-1107
19.5 1.31 AF9552-1103 AF9552-1105 AF9552-1107
21 1.44 AF9552-1101 AF9552-1105 AF9552-1107
21 1.44 AF9552-1101 AF9552-1105 AF9552-1107
22 1.51 AF9552-1104 AF9552-1105 AF9552-1107
22 1.51 AF9552-1104 AF9552-1105 AF9552-1107
23 1.59 AF9552-1102 AF9552-1103 AF9552-1107
23 1.59 AF9552-1102 AF9552-1103 AF9552-1107
25 1.72 AF9552-1102 AF9552-1106 AF9552-1107
25 1.72 AF9552-1102 AF9552-1106 AF9552-1107
26 1.79 AF9552-1101 AF9552-1103 AF9552-1107
26 27.51.79 1.86 AF9552-1101
AF9552-1101 AF9552-1103 AF9552-1106 AF9552-1107
AF9552-1107
27.5 28 1.86 1.93 AF9552-1101
AF9552-1101 AF9552-1104 AF9552-1106 AF9552-1107
AF9552-1107
28 29 1.93 1.99 AF9552-1101
AF9552-1101 AF9552-1104 AF9552-1105 AF9552-1107
AF9552-1107
29 1.99 AF9552-1101 AF9552-1105 AF9552-1107

374 44mm
44mm
aeroflowperformance.com
 WASTEGATES & ACCESSORIES

60mm WASTEGATE SPRINGS

PART NUMBER AF9552-1101 AF9552-1102 AF9552-1109 AF9552-1108

FREE LENGTH 64.70mm 62.80mm 97.15mm 122.80mm
BAR ) OUTSIDE DIAMETER 29.25mm 28.80mm 47.30mm 59.18mm
SPRING PRESSURE 2.8 PSI ( 0.18 BAR ) 1.6 PSI ( 0.10 BAR ) 8.5 PSI ( 0.60 BAR ) 14.35 PSI ( 0.98 BAR )
SPRING LOCATION INNER INNER MIDDLE OUTER
SPRING COLOUR YELLOW DARK GREEN DARK BLUE LIGHT GREEN
PSI BAR
8.5 0.58 AF9552-1109
10 0.69 AF9552-1101 AF9552-1109
11 0.76 AF9552-1102 AF9552-1109
14 0.96 AF9552-1108
16 1.1 AF9552-1101 AF9552-1108
17 1.17 AF9552-1102 AF9552-1104 AF9552-1108
22 1.51 AF9552-1109 AF9552-1108
24.5 1.69 AF9552-1101 AF9552-1109 AF9552-1108
25.5 1.76 AF9552-1102 AF9552-1109 AF9552-1108

60mm

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF91-8860 AF91-8060

AF91-8838

AF9552-1107
79.4mm
59mm
) 14.5 PSI ( 1 BAR )
OUTER
BROWN

AF91-8038
AF91-8044
AF91-8844

WASTEGATE TURBO BAG / BLANKET

The Aeroflow Performance external wastegate bag / blanket range provides high
quality material selection, design, and construction, whilst at an affordable price.
AF9552-1107
These wastegate bags are designed to help minimize the heat soak transfer
between the main body and actuator body of the wastegate. This will allow a
AF9552-1107
more stable operation of the wastegate valve allowing consistent performance of
AF9552-1107
the turbocharger. The added benefit from these bags will prevent the heat from
AF9552-1107
damaging components surrounding the external wastegates such as wiring and
AF9552-1107
hoses.
Will suit Aeroflow External Wastegates. May also suit other brands.
AF9552-1107
Available in two different options titanium and carbon.
AF9552-1107
AF9552-1107
AF9552-1107
AF9552-1107
Part No
AF9552-1107 Description - To Suit
TITANIUM SERIES
AF91-8038 38mm wastegate bag titanium
AF91-8044 44mm wastegate bag titanium
AF91-8060 60mm wastegate bag titanium

CARBON SERIES
AF91-8838 38mm wastegate bag carbon
AF91-8844 44mm wastegate bag carbon
AF91-8860 60mm wastegate bag carbon

AF59-2100 Replacement springs for all wastegate bags

aeroflowperformance.com 375
 BLOW OFF VALVES

PLUMB BACK BLOW OFF VALVE WITH

V-BAND
This 50mm universal plumb-back blow off valve is one of the highest flowing
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

on the market. For use on turbo-charged and supercharged applications. The

body and all internal components are CNC-machined from 6061 aluminium
alloy. 1.98 in (50.5mm) valve. Oversized 7mm hose barb. 34mm plumb back
option included with other sizes sold separately. Flange is v band, and comes
with a 2” weld on pipe. Available in both black and polished options.

Part No Colour Description

AF64-5051 Polished 50mm (1-31/32”) high flow BOV
AF64-5051S Silver 50mm (1-31/32”) high flow BOV
AF64-5051BLK Black 50mm (1-31/32”) high flow BOV
AF59-5052 Aluminium 50mm (1-31/32”) weld on flange aluminium
AF59-5053 S/Steel 50mm (1-31/32”) weld on flange stanless steel
AF59-5050 Replacement diaphragm & O-Rings
AF59-5051 Replacement billet V-band clamp
AF59-2150 Green 2 psi (.13BAR) Supercharger only spring
AF59-2152 Black 6 psi (.4BAR)Turbo spring (-8 to -12 in/Hg)
AF59-2153 Yellow 11 psi (.75BAR)Turbo spring (-18 to -20 in/Hg)
AF59-5054 Replacement O-Ring

50MM BILLET ALUMINIUM BLOW OFF

VALVE WITH V-BAND
Aeroflow’s 50mm (1-31/32”) billet aluminium universal high flow blow off valve
is for use on turbo-charged and supercharged applications. The body and all
internal components are CNC-machined from 6061-T6 aluminum. 50.5mm
(1-63/64”) valve. 7mm (1/4”) vacuum / boost hose barb size. The flange is
v-band design and comes with a 50.8mm (2”) weld on pipe.

Part No Colour Description

AF64-5050 Polished 50mm (1-31/32”) high flow BOV
AF64-5050S Silver 50mm (1-31/32”) high flow BOV
AF64-5050BLK Black 50mm (1-31/32”) high flow BOV
AF59-5052 Aluminium 50mm (1-31/32”) weld on flange aluminium
AF59-5053 S/Steel 50mm (1-31/32”) weld on flange stanless steel
AF59-5050 Replacement diaphragm & O-Rings
AF59-5051 Replacement billet V-band clamp
AF59-2150 Green 2 psi (.13BAR) Supercharger only spring
AF59-2152 Black 6 psi (.4BAR)Turbo spring (-8 to -12 in/Hg)
AF59-2153 Yellow 11 psi (.75BAR)Turbo spring (-18 to -20 in/Hg)
AF59-5054 Replacement O-Ring

376 aeroflowperformance.com
 BLOW OFF VALVE ACCESSORIES

AF64-5052BLK
AF64-5059BLK

AF64-5053BLK

BLOCK OFF PLUGS

These block off plugs made by Aeroflow Performance are designed to
block off recirculation hoses when they are not needed after installing your
aftermarket blow off valve. These block off plugs are available in the popu-
AF64-5056BLK lar sizes 20mm, 25mm, 30mm, 34mm and 38mm and can be purchased in
silver or black colour options.

BLOW OFF VALVE ADAPTERS

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

Part No Colour Description
Aeroflow Performance has designed these blow off valve bolt on adapters for
various direct fit applications. They will allow our AF64-5050 and AF64-5051 AF64-5220 Silver 20mm (25/32”) plug
to be a bolt on item for these suited applications. All in Black anodised finish. AF64-5220BLK Black 20mm (25/32”) plug
New silicon O-ring seal included. AF64-5225 Silver 25mm (63/64”) plug
AF64-5225BLK Black 25mm (63/64”) plug
AF64-5230 Silver 30mm (1-3/16”) plug
AF64-5230BLK Black 30mm (1-3/16”) plug
Part No Suits
AF64-5233 Silver 33mm (1-5/16”) plug
AF64-5060BLK 25.4mm (1”) clamp on AF64-5233BLK Black 33mm (1-5/16”) plug
AF64-5058BLK 38.1mm (1.5”) clamp on AF64-5234 Silver 34mm (1-11/32”) plug
AF64-5059BLK HKS to Aeroflow conversion adapter AF64-5234BLK Black 34mm (1-11/32”) plug
AF64-5057BLK BMW 135, 335, 535 and X5 AF64-5238 Silver 38mm (1-1/2”) plug
AF64-5054BLK Mazda 3, Mazda 6 and CX-7 AF64-5238BLK Black 38mm (1-1/2”) plug
AF64-5052BLK Mitsubishi Evolution all models
AF64-5055BLK Nissan R35 GTR (2 included)
AF64-5053BLK Subaru WRX 2002 to 2007 and STi 2004 to 2013
AF64-5056BLK Subaru WRX 2008 to 2013, Liberty 2005 to 2009

PLUMB BACK BARB ADAPTERS

These Plumb back barb options in various sizes to suit the Aeroflow
Performance plumb back blow off valve AF64-5051 and
AF64-5051blk. Available in both black and polished options to match
your blow off valve.

Part No Colour Description

AF64-5120 Polished 20mm (25/32”) barb adapter
AF64-5120BLK Black 20mm (25/32”) barb adapter
AF64-5125 Polished 25mm (63/64”) barb adapter
AF64-5125BLK Black 25mm (63/64”) barb adapter
AF64-5130 Polished 30mm (1-3/16”) barb adapter
AF64-5130BLK Black 30mm (1-3/16”) barb adapter
AF64-5133 Polished 33mm (1-5/16”) barb adapter
AF64-5133BLK Black 33mm (1-5/16”) barb adapter
AF64-5134 Polished 34mm (1-11/32”) barb adapter
AF64-5134BLK Black 34mm (1-11/32”) barb adapter
AF64-5138 Polished 38mm (1-1/2”) barb adapter
AF64-5138BLK Black 38mm (1-1/2”) barb adapter

aeroflowperformance.com 377
 TURBO ACCESSORIES

PENCIL TURBO TIMER

• Designed for 12 volt application to protect engine’s efficiency and extend
turbo life.
• Easily adjust timer from 10 seconds – 19 minutes.
• Also features a built in voltage gauge.
• Slim pencil design for easy mounting.
• 100mm (3-15/16”) long 19mm (3/4”) diameter
BOOST CONTROLLER TEE
Part No Description Easily adjustable from under the bonnet, simple fitment with included mount-
AF49-1026 Pencil Turbo Timer with memory. ing bracket. 5mm (13/64”) barbs. Fast boost gated system.

Part No Colour Description

AF64-2096 Blue Manual boost controller.
AF64-2096BLK Black Manual boost controller.
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

MINI TURBO AF64-2190BLK

TIMER
• Designed for 12 volt.
application to protect engines
efficiency and extend turbo life.
• Easily adjust timer from
15 seconds – 3 minutes.
• Mini design for easy mounting.
DIESEL BOOST CONTROLLER
The Aeroflow Performance diesel specific manual boost controller is a
dedicated unit for diesel turbocharged engines running variable vane
Part No Description turbochargers, providing accurate boost control from the turn of the knob. This
manual boost controller allows users to adjust boost control and spool rate ;
AF49-1025 Mini Turbo Timer with memory. therefore increasing engine power, reduce turbo lag and create a linear boost
curve. This great for all types of driving conditions from adjusting boost for
towing, or changing it if the EGT gets too high and to bring boost on earlier or
hold it longer. When the factory boost curve is erratic this can lead to engine or
turbo premature failure.

Part No Description
AF64-2190BLK Diesel boost controller

378 aeroflowperformance.com
 TURBO ACCESSORIES

3 PORT SOLENOID
Aeroflow’s replacement 3 port solenoid kit is supplied complete with fittings,
mounting and wiring loom. This handy complete kit is also perfect for use
with aftermarket installation to your vehicle to control your boost and set it
precisely. This can be custom wired into many late model vehicles by your

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

DIGITAL BOOST CONTROLLER tune shop. Suits AF49-1030 & AF49-1039
• Three stages of boost pressure, create your personal setting and save them.
• Rapid switching, allows you to switch between settings immediately. Part No Description
• Over boost alert to prevent turbo and engine damage.
• Scramble function allows burst of power. AF49-1036 3 port solenoid
• Pressure limited to 43 PSI (2.9 BAR).
• Air Fuel Ratio wire-in option available for engine protection

Part No Description
AF49-1061 Electronic boost controller.
AF49-1036 Replacement electronic boost controller solenoid kit

ELECTRONIC BOOST CONTROLLER

• Two stages of boost pressure, create your personal setting and save them.
• Rapid switching, press only one button and switch the setting immediately.
• Over boost alert to prevent turbo and engine damage.
• Pressure limited to 43 PSI (2.9 BAR).

Part No Description
AF49-1030 Electronic boost controller.
AF49-1036 Replacement electronic boost controller solenoid kit

aeroflowperformance.com 379
 INTERCOOLERS

Measurement is core size only

Part No Finish Core size WxHxT CFM

AF90-1002 Polished 280mm (11”) x
300mm (11-13/16” )x 76mm (3”) 660
AF90-1002BLK Black 280mm (11”) x
300mm (11-13/16” )x 76mm (3”) 660
AF90-1001 Polished 450mm (17-11/16”) x
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

300mm (11-13/16” )x 76mm (3”) 540

AF90-1001BLK Black 450mm (17-11/16”) x
300mm (11-13/16” )x 76mm (3”) 540
AF90-1000 Polished 600mm (23”) x
90mm
300mm (11-13/16” )x 76mm (3”) 510
90mm
AF90-1000BLK Black 600mm (23”) x
STREET SERIES INTERCOOLERS
AF90-1004 Polished
300mm (11-13/16” )x 76mm (3”)
600mm (23”) x
510

300mm (11-13/16” )x 100mm (4”) 715

The Aeroflow Performance street series intercoolers have become quite
AF90-1004BLK Black 600mm (23”) x
a popular choice amongst the automotive scene as they are known for
300mm (11-13/16” )x 100mm (4”) 715
their great value and top quality proving to exceed expectations at just a
fraction of the price. Made from a durable alloy which is TIG welded. All
intercoolers are pressure tested with a recommended maximum of 50psi
( 3.44 Bar ). Aeroflow street series intercoolers are designed with a tube
and fin core which offer a low pressure drop which helps with stability on
turbo applications. They are available in universal cores sizes with 76mm
( 3” ) inlets and outlets that have a raised lip for securing silicone hose.
Each intercooler features two female M8x1.25mm mounting bosses and are
available in polished and black powder coated finishes.

RACE SERIES INTERCOOLERS

The Aeroflow Performance race series intercoolers provide the best cooling
capacity, while safely increasing horsepower to provide street and race
proven performance no matter the application. The tube and fin core is a
straight through low restriction design for less pressure drop, resulting in
higher flow and reduced lag time. With end tanks constructed from 5052
sheet aluminium for extreme durability which improves heat transfer. It has
the highest thermodynamic dissipative process which will efficiently reduce
intake air temperatures, while significantly improving engine output. They
are available in universal cores sizes with 76mm ( 3” ) inlets and outlets that
have a raised lip for securing silicone hose. Each intercooler features two
female M8x1.25mm mounting bosses and are available in polished and black
powered coated finishes.

Part No Finish Core size WxHxT

AF90-1008 Polished 600mm (23”) x
300mm (11-13/16” )x 76mm (3”)
AF90-1008BLK Black 600mm (23”) x
300mm (11-13/16” )x 76mm (3”)
AF90-1009 Polished 600mm (23”) x
300mm (11-13/16” )x 100mm (4”)
AF90-1009BLK Black 600mm (23”) x
300mm (11-13/16” )x 100mm (4”)

380 aeroflowperformance.com
 INTERCOOLERS

WATER TO AIR INTERCOOLERS

A water to air intercooler is one where the exchange of heat occurs between water and air. Water is passed through the core of the intercooler instead of air
which is responsible for drawing the heat out of the intake air through the intercooler so that the heat from your charge pipes is transferred to the water. These
water to air intercoolers can be mounted anywhere, and just needs to have water plumbed to it.
The Aeroflow Performance water to air intercoolers are great alternative to your conventional air to air intercoolers as you have a constant flow of cool water
circulating through the intercooler core at all times. This is especially useful during drag racing, when the core temperature raises significantly during a pass,
and then the car sits still for several minutes. Another bonus is the incredible low pressure drop these water to air intercoolers provide with as low as 0.05PSI
recorded on most of our range. Along with a great design in the core and end tanks allow it to operate at continuous pressure of up to 150 PSI (10.34BAR).
These water to air intercoolers can be installed to almost any application from drag car to street car. They are all a universal fitment, featuring -12ORB female
ports for custom plumbing. These water to air intercoolers flow water, they require a water pump, a reservoir, and a heat exchanger mounted somewhere that
will receive good airflow to cool the water. See page 265 for universal brushless water pumps and page 267 for universal heat exchanger.

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

Part No SPECIFICATIONS Part No SPECIFICATIONS
AF90-3000 Total Size is 431mm ( 17” ) x 311mm ( 12.25 ” ) x 228mm ( 9” ) AF90-3001 Total Size is 381mm ( 15” ) x 165mm ( 6.5 ” ) x 152mm ( 6” )
Core Size is 241mm ( 9.5” ) x 228mm ( 9” ) x 228mm ( 9” ) Core Size is 266mm ( 10.5” ) x 152mm ( 6”) x 127mm ( 5” )
Recommended for up to 2500 CFM / 2000 HP Recommended for up to 1200 CFM / 1200 HP
Maximum water/air pressure: 70PSI (4.82BAR) Maximum water/air pressure: 70PSI (4.82BAR)
Air Inlet/Outlet: 101mm ( 4” ) Air Inlet/Outlet: 88.9mm ( 3.5” )

Part No SPECIFICATIONS Part No SPECIFICATIONS

AF90-3003 Total Size is 395mm ( 15.55” ) x 510mm ( 20.08” ) x AF90-3002 Total Size is 508mm ( 20” ) x 393mm ( 15.50” ) x 304mm ( 12” )
305mm ( 12” ) Core Size is 304mm ( 12” ) x 304mm ( 12” ) x 254mm ( 10” )
Core Size is 305mm ( 12” ) x 234mm ( 9.25” ) x Recommended for up to 3800 CFM / 3000 HP
250mm ( 9.8” ) Maximum water/air pressure: 70PSI (4.82BAR)
Recommended for up to 1500 CFM / 1200 HP Inlet / Outlet: 88.9mm ( 3.5” )
Maximum water/air pressure: 70PSI (4.82BAR)
Air Inlet/Outlet: 114.3mm ( 4.5” )

aeroflowperformance.com 381
 NITROUS ACCESSORIES

AF64-5000R

261mm

233.5mm

AF64-5000BLK

175.8mm

132mm
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

174mm

257.5mm
AF64-5000P

BILLET NITROUS BOTTLE BRACKETS

Aeroflow’s billet nitrous bottle brackets are machined on the correct angle
to suit your nitrous bottle with double O-rings to hold the bottle firmly and AF64-5000
prevent scratching.
•Heavy-duty finger knobs.
•Brackets open a full 180° for easy bottle replacement.
•Stainless steel hardware included.

Blue Red Black Polished

AF64-5000 AF64-5000R AF64-5000BLK AF64-5000P
AF59-5001 Replacement screw knob suits all bottle brackets

76mm (4”)
30mm
1-3/16”

NITROUS GAUGE
The aeroflow performance 38mm ( 1-1/2” ) nitrous pressure gauge measures
HIGH PRESSURE NITROUS FILTER
from 0-1500 PSI and is essential in monitoring the nitrous bottle for optimum Aeroflow’s high pressure Nitrous filters feature a precision billet aluminium
performance. Recommended pressure is indicated in colour coded levels for body and cleanable high-flow 140 micron stainless steel element that consists
your convenience. * Note adaptor not included and sold separately under of ten times the filtration area of a standard filter.
AF140-04 for -4AN or AF140-06 for -6AN.

Part No Description Part No AN Description Replaces

AF30-2215 Nitrous pressure gauge AF66-2040 -4 High Pressure Nitrous Filter NOS15550
AF66-2041 -6 High Pressure Nitrous Filter NOS15552

382 aeroflowperformance.com
 SUPERCHARGER ACCESSORIES

NITROUS BOTTLE
ADAPTER WITH FILTER
Suit Gen II Nos bottles

Part No Description
AF758-04 Adapters bottle to -4 AN with 150 micron filter
AF758-06 Adapters bottle to -6 AN with 150 micron filter
AF59-7580 Replacement filter & teflon washer

GM LSA SUPERCHARGER SPACERS

Aeroflow Performance supercharger spacers to suit the GM LSA. This spacer
sits underneath the stock supercharger and raises it by 10mm (25/64”) to
provide better airflow to the rear cylinder banks. It removes the restriction in
airflow which allows more air flow thus more horsepower to be gained along

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

with the ability to reduce intake temperatures. Now made form high-temp
PTFE with rubber o-ring seals to withstand higher intake temperatures
caused by exteme use.

WELD-IN NOZZLE FITTINGS Part No Description

1/16 NPT internal thread. 19mm (3/4”) overall length AF1850-1008 LSA supercharger spacers

Part No Description
AF994-01 Kit containing 8 weld-in nozzle fittings
AF994-01-01 1 x weld-in nozzle fitting only

NITROUS BOTTLE ADAPTER

Part No Description
AF759-04 Adapters bottle to -4 AN Suit Gen II Nos bottles GM LSA GASKETS
AF759-06 Adapters bottle to -6 AN Suit Gen II Nos bottles
AF760-04 Adapters bottle to -4 AN Suits BOC Nos Bottles The Aeroflow Performance LSA Intake Gasket kit includes one set of intake
AF760-06 Adapters bottle to -6 AN Suits BOC Nos Bottles gaskets, one throttle body gasket, water pump gaskets and both super-
charger gaskets.

Part No Description
AF1850-1010 LSA 6 piece intake gasket set
AF1850-1011 LSA / LS3 intake gaskets only

aeroflowperformance.com

383
 SUPERCHARGER ACCESSORIES

AF64-2126

AF64-2128

GM LSA BLOWER HUB & PULLEYS

GM LSA / LS3 INTAKE SPACERS Increase the horsepower of your LSA engine with these blower pulleys.
Available in 60.96mm (2.4”) and 64.7mm (2.55”) with matching blower hub
Aeroflow Performance has designed the thermo plastic intake spacers. sold separately. Replace the factory pulley with the blower hub, then you
These are designed to suit your GM LS3 style heads allowing you to bolt can easily install either the 60.96mm (2.4”) or 64.7mm (2.55”) blower pulley
on the GM LSA supercharger or simply can be bolted on to your GM LSA depending on the boost you want to make. These pulleys have a textured
engine. Being a thermo plastic material gives it the added benefit of reduced anti-slip finish to enhance belt grip. 64.7mm (2.55”) pulley gives up to 2psi
heat transfer as the supercharger is no longer sitting directly on top of the over stock pulley, 60.96mm (2.4”) pulley gives up to 4psi over stock pulley.
cylinder but rather 10mm (25/64”) above. * Note this will raise the blower These have been tested with factory size crank pulley diameter.
assembly up 10mm so be sure to check for bonnet clearance for conversion
cars. Part No Description
AF64-2126 Blower hub coupler
Part No Description
TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

AF64-2127 60.96mm (2.4”) blower pulley

AF1850-1005 Suits LSA and LS3 heads AF64-2128 64.7mm (2.55”) blower pulley

GM LSA MAP SENSOR DELETE

GM LS SERIES INTAKE ADAPTERS This Aeroflow Performance LSA Supercharger MAP sensor block off plate is
Aeroflow Performance now offer billet 6061 aluminium intake adapters to bolt designed to allow you to block off either the 2nd MAP sensor, or the 2nd IAT
up any rectangle port intake or supercharger to your cathedral port heads. sensor on your LSA supercharger lid. The sealing plug IS CNC machined
This means you can simply adapt an LSA blower or late model manifold to from billet aluminium and anodised in a black finish. This delete plate comes
your early heads. Kit comes complete O-Rings for a sure seal. If bolting up with O-ring & bolt.
an LSA intake you require M6 x 70mm UHL bolts. When running a car intake
manifold you require M6 x 130mm UHL bolts and when running a truck intake Part No Description
manifold you require M6 x 90mm UHL length bolts. 12.7mm (1/2”) thick.
AF64-2199 LSA MAP sensor delete
Part No Description
AF1850-1007 LS series intake adapters

GM LSA ISOLATOR COUPLER GM LSA VACUUM DELETE PLUGS

These Aeroflow Performance LSA Supercharger vacuum port block off plates
Aeroflow Performance LSA isolator coupler installs as a direct replacement
are a great way to rid the engine bay of the unnecessary vacuum lines on
for the original. This is specifically designed to handle high boost and high
your LSA blower during conversions. These sealing plugs are CNC machined
load applications where the factory one can fail.
from billet aluminium and anodised in a black finish. These pair of plugs
come with O-rings and bolts.
Part No Description
AF64-2129 Blower isolator coupler Part No Description
AF64-2198 LSA vacuum delete plugs

384 aeroflowperformance.com
 SUPERCHARGER ACCESSORIES

AF37-0602

BILLET BURST PANEL

DEFLECTOR SHIELD
Aeroflow’s Burst panel deflector shield is designed to mount directly to your
intake manifold or screw type supercharger, deflector can be mounted both
ways (up or down) to direct force away from car. Hard anodized and includes AF37-0601BLK
burst panel measurement hole.

Part No Description
AF64-4400BLK Burst Panel Deflector Shield

BLOWER STUD KITS

Blower Guard is Blower stud kits are machined from aerospace-quality 6061-T6 aluminium
4-1/4” (108mm) and are black or silver anodized. In the event of a severe backfire, these
wide studs will break and allow separation of manifold and blower. This protects
engine and blower from unnecessary damage. Kit comes complete with

TURBO, NITROUS SYSTEM & SUPERCHARGER ACCESSORIES

anodized aluminium studs, 12-point, quality steel nuts and hardened steel
washers. Torque to 15ft lbs.

Part No Colour / Description

AF37-0601 Silver studs and nuts, 73mm (2-7/8”) total length
AF37-0601BLK Black studs and nuts, 73mm (2-7/8”) total length
AF37-0602 Silver studs and nuts, 63.5mm (2-1/2”) total length
AF64-2906BLK AF37-0602BLK Black studs and nuts, 63.5mm (2-1/2”) total length
AF37-0603BLK Black studs and nuts, 73.8mm (2-29/32”) total length

AF64-2910
AF64-2906

AF64-2907BLK

AF64-2909
BLOWER RELIEF VALVE
Manual pressure relief valve for Superchargers.
AF64-2907

Thread Black Silver

AF64-2911
AF64-2908BLK 1/8” NPT AF620-02BLK AF620-02S
7/16” NPT AF620-04BLK AF620-04S

AF64-2908
AF64-2911BLK

BLOWER BELT GUARD

Aeroflow’s belt guards are machined from billet
aluminium and available in black or silver anodised.
This guard covers the top 150 degrees of the blower pulley. This guard
offers protection for the fuel, oil lines or anything that passes outside
the blower belt. Mounting hardware is required and is sold separately.

Part No Colour Description

AF64-2905 Silver Blower belt guard INJECTOR HAT ADJUSTABLE AIR BLEED
AF64-2905BLK Black Blower belt guard
AF64-2906 Silver 44.5mm (1-3/4”) spacers (sold individually) This great design allows you to set the idle once and use this great product
AF64-2906BLK Black 44.5mm (1-3/4”) spacers (sold individually) to adjust the air mixture for easy and instant tuning. 1/4 NPT thread into
AF64-2907 Silver 67mm (2-5/8”) spacers (sold individually) injector hat.
AF64-2907BLK Black 67mm (2-5/8”) spacers (sold individually)
AF64-2908 Silver 76mm (3”) spacers (sold individually) Part No Colour
AF64-2908BLK Black 76mm (3”) spacers (sold individually) AF49-2000S Silver
AF64-2909 Black 57mm (2-1/4”) studs (sold individually) AF49-2000BLK Black
AF64-2910 Black 86mm (3-3/8”) studs (sold individually)
AF64-2911 Silver Starter plate for blower belt guard (Roots)
AF64-2911BLK Black Starter plate for blower belt guard (Roots)

aeroflowperformance.com 385
 RACE CAR ACCESSORIES

BILLET BOTTLE MOUNTS

FIRE SUPRESSION LINE KIT Aeroflow bottle mounts are perfect for nitrous, CO2, fire and fresh air
Aeroflow’s Fire System line kit features 25ft (7.5m) of hard line, 6 x 180° bottles. Can be mounted to weld on tabs, flat surfaces or chassis bars by
Spray Pattern Injector Nozzles, 5 x T-pieces, 21 x Tube Nuts, 21 x Tube purchasing the suitable bar mount. Multiple mount sizes ensure you get
Sleeves and 2 x 1/8” NPT to -4AN adapters. This whole kit is anodized the best fit for your needs. Manufactured from billet 6061-T6 aluminium;
black for that stealth look working seamlessly with the AF64-6000 Billet Fire the mounts feature recessed rubber O-rings for a secure scratch free
Supression Injector Nozzle Head. hold with many bottle types. Accurately machined with 2 x 1/4”-20 female
threaded holes with 2-5/8” / 66.7mm spacing. Aeroflow’s bottle and bar
mount system is available in polished or black anodised finishes and sold
Part No Colour / Description individually. Mounts are 12.7mm (1/2”) thick aluminium.
AF66-5000 Fire system line kit. Black anodised finish
AF66-5001 Fire System Nozzels only ( 2 pack ) Part No Colour Suits Bottle Dia Height
AF6400-2000 Polished 50.8mm (2”) 72mm (2-53/64”)
AF6400-2000BLK Black 50.8mm (2”) 72mm (2-53/64”)
AF6400-3500 Polished 88.9mm (3.5”) 110mm (4-21/64”)
AF6400-3500BLK Black 88.9mm (3.5”) 110mm (4-21/64”)
RACING & SAFETY ACCESSORIES

AF6400-4000 Polished 101.6mm (4”) 130mm (5-7/64”)

AF6400-4000BLK Black 101.6mm (4”) 130mm (5-7/64”)
AF6400-4375 Polished 111mm (4-3/8”) 133mm (5-15/64”)
AF6400-4375BLK Black 111mm (4-3/8”) 133mm (5-15/64”)
AF6400-4500 Polished 114.3mm (4-1/2”) 137mm (5-25/64”)
AF6400-4500BLK Black 114.3mm (4-1/2”) 137mm (5-25/64”)
FIRE SUPRESSION AF6400-5250 Polished 133.35mm (5-1/4”) 159mm (6-1/4”)
AF6400-5250BLK Black 133.35mm (5-1/4”) 159mm (6-1/4”)
INJECTOR HEAD AF6400-6200 Polished 157.48mm 96.2”) 190.5mm (7-1/2”)
AF6400-6200BLK Black 157.48mm (6.2”) 190.5mm (7-1/2”)
Fire Suppression Injector Head (suits Stroud Bottles AF64-6000)
AF6400-6900 Polished 175.26mm (6.9”) 206mm (8-1/8”)
Aeroflow’s Billet Fire Suppression Injector Head is machined from 6061
AF6400-6900BLK Black 175.26mm (6.9”) 206mm (8-1/8”)
T6 aluminium and suits bottles that use 1”-14 thread. These are a direct fit
AF59-6400 Polished Replacement hold down knob
to Stroud and similar bottles. This injector head features a stainless steel
AF59-6400BLK Black Replacement hold down knob
injector nozzle for longevity and precise accuracy. Has 1/8” NPT ports for
ease of plumbing and can be used with a cable or lever activation system.
Anodized black and perfect for use with the AF66-5000 line kits.

Part No Colour / Description

AF64-6000 Black anodised fire supression injector head.

BILLET BAR MOUNTS

Mounts are12.7mm (1/2”) thick aluminium. Overall length is 89mm (3-1/2”)
1/4” -20 bolts included.

Part No Colour Suits Bar Dia Height

AF6500-0750 Polished 19.05mm (3/4”) 44.5mm (1-3/4”)
AF6500-0750BLK Black 19.05mm (3/4”) 44.5mm (1-3/4”)
AF6500-1000 Polished 25.4mm (1”) 47.5mm (1-7/8”)
AF6500-1000BLK Black 25.4mm (1”) 47.5mm (1-7/8”)
AF6500-1250 Polished 31.75mm (1-1/4”) 57mm (2-1/4”)
AF6500-1250BLK Black 31.75mm (1-1/4”) 57mm (2-1/4”)
AF6500-1375 Polished 34.79mm (1-3/8”) 60mm (2-23/64”)
AF6500-1375BLK Black 34.79mm (1-3/8”) 60mm (2-23/64”)
AF6500-1500 Polished 38.1mm (1-1/2”) 60mm (2-23/64”)
AF6500-1500BLK Black 38.1mm (1-1/2”) 60mm (2-23/64”)
AF6500-1625 Polished 41.14mm (1-5/8”) 63.5mm (2-1/2”)
AF6500-1625BLK Black 41.14mm (1-5/8”) 63.5mm (2-1/2”)
AF6500-1750 Polished 44.45mm (1-3/4”) 66.6mm (2-5/8”)
AF6500-1750BLK Black 44.45mm (1-3/4”) 66.6mm (2-5/8”)
AF6500-2000 Polished 50.8mm (2”) 73mm (2-7/8”)
AF6500-2000BLK Black 50.8mm (2”) 73mm (2-7/8”)

386 aeroflowperformance.com
 RACE CAR ACCESSORIES

AF99-3002

AF99-3003
ROLL BAR PADDING
Aeroflow roll bar padding is made from high density core cell foam and is
its perfect for wrapping roll cages and bars. The inside diameter is off-set
by 11mm (7/16”) to provide extra thickness and absorption. When rotated
toward the pessengers it provides extra protection. This padding is NOT SFI
approved. Suits bar sizes 41.3mm (1-5/8”) and 47.6mm (1-7/8”). Comes in
914mm (3ft) lengths.

Part No Colour / Description

AF93-1000BLK Black roll bar padding

AF99-3000

RACING & SAFETY ACCESSORIES

AEROFLOW TYRE COVERS
Aeroflow has the answer to maintaining even pressure between rear tyres
on race cars as uneven pressure can cause inconsistent launches and
dangerous instability down the track throwing off your chassis settings.
Whether your car is in the pits or in the staging lanes, there’s a good chance
a rear tyre will be exposed to direct sunlight unless you shield it with an
Aeroflow tyre cover. Made from durable vinyl these yellow covers can attach
either over the tyre for altered and dragsters or with suction cups to the body
WHEELIE BAR WHEEL panels for full bodied cars. Sold individually.

Billet Aluminium wheel bonded with a durable polyurethane material that Part No Description
won’t dent. 101.6mm (4”) diameter, 1-5/8” hub-to-hub and be fitted with
either 9.52mm (3/8”), 12.7mm(1/2”) or 15.8mm (5/8”) through bolt by using AF99-3000 Universal tyre cover, 5 suction /clip
our innovative chrome moly multi sleeve design. Each wheel is made from AF99-3001 Tyre cover up to 876mm (34-1/2”) tyre.
6061-T6 billet Aluminium. Available in Silver or Black anodised finishes. Sold AF99-3002 Tyre cover up to 915mm (36”) tyre.
individually. AF99-3003 5pk replacement suction cup for AF99-3000

Part No Description
AF64-4360 Natural aluminium finish
AF64-4360BLK Black anodised finish

aeroflowperformance.com 387
 RACE CAR ACCESSORIES

MORSE CABLES & ACCESSORIES

For full listing of morse cables and all associated accessories including
throttle stops and brackets see page 201.

PARACHUTE RELEASE CABLE KIT

This kit streamlines installation of cable release system for a parachute. The
kit includes a black 5.48m (18ft) long Teflon lined cable, clip type cable with
exposed .070” diameter wire on one end (may be cut to preferred length),
Black anodised CNC machined lightweight aluminium lever/handle, rod end
and cable mounting hardware. The unique feature in this kit is a billet cable
end to eliminate cable from fraying and causing parachute bag damage.

Part No Colour / Description

AF80-1000 Complete kit with Chrome handle & black accessories
AF80-1000BLK Complete kit with Black handle & black accessories
RACING & SAFETY ACCESSORIES

AF64-4357 Universal Chrome lever/handle only

AF64-4357BLK Universal Black lever/handle only
AF59-1000 Chute release cable only (blue in colour)
AF59-1000BLK
AF59-1001
Chute release cable only (black in colour)
Cable end terminator (black in colour)
AEROFLOW PARACHUTE SAFETY FLAG
Note: Handle can be used with other parachute release kits. Part No Description
AF98-2044 Aeroflow parachute safety flag

535mm
21-1/16”

360mm
14-11/64”

300mm

PORTABLE AIR TANKS (125 PSI (8.6 Bar) Max) 11-13/16”

Black & Yellow tanks are made of steel. Aluminium tanks are Alloy.

Part No Colour Description Weight

400mm
AF77-3000 Black 19L (5 US Gal) air tank 5.85kg 12.9lbs 15-3/4”
AF77-3001 Black 38L (10 US Gal) air tank 9.35kg 20.5lbs
AF77-3010 Yellow 19L (5 US Gal) air tank 5.85kg 12.9lbs
AF77-3011 Yellow 38L (10 US Gal) air tank 9.35kg 20.5lbs
AF77-4000 Aluminium 19L (5 US Gal) air tank 2.8kg 6.3lbs
AF77-4001 Aluminium 38L (10 US Gal) air tank 4.5kg 9.9lbs
AF59-3000 Black Replacement air line suits all tanks.

388 aeroflowperformance.com
 RACE CAR ACCESSORIES

SPRINT For more Quick

CAR ACCESSORIES Release fittings
see page 79

DIAPHRAGM BLEEDER CONTROL SYSTEM

QUICK RELEASE TITANIUM FITTINGS Aeroflow’s tyre bleeder uses preset spring pressure to control tyre pressure
venting to the atmosphere.
Part No Description Application
Part No Description

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

AFQR104-03 Quick Release -3 EPDM Seal Black Titanium
AFQR102-06 Quick Release -6 Viton Seal Black Titanium (Fuel & Oil) AF64-2085 Diaphragm Bleeder Control System
AFQR102-08 Quick Release -8 Viton Seal Black Titanium (Fuel & Oil) AF59-2085 Diaphragm Bleeder Replacement Spares Kit
AFQR102-10 Quick Release -10 Viton Seal Black Titanium (Fuel & Oil)

NOTE: For use in OFF road brake applications must use fittings with EPDM
seal. Viton seals are recommended for unleaded fuels & oiling applications.

INJECTOR NOZZLE WITH BREATHER

Part No Description
BLEEDER AF66-2100 Injector nozzle banjo with breather
SETTING TANK
Aeroflow’s fabricated bleeder setting
tank is a great and stress-free way to
set your tire bleeders and to ensure
bleeder accuracy.

Part No Description
AF77-2500BLK Black bleeder Setting Tank

SPRINT CAR BUMP CUP

Part No Description
AF64-4500 Sprint Car bump cup suits PRO SHOCK only

aeroflowperformance.com 389
 WELD-ONS

BILLET ALLOY
WELD ON FILLER & CAP
Bore Black Blue Gold Polished Red Silver Raw Purple Height
25.4mm 1” AF460-16BLK AF460-16BL AF460-16G AF460-16P AF460-16R AF460-16S AF460-16 AF460-16PUR 27.5mm
38.1mm 1-1/2” AF460-24BLK AF460-24BL AF460-24G AF460-24P AF460-24R AF460-24S AF460-24 AF460-24PUR 35mm
50.8mm 2” AF460-32BLK AF460-32BL AF460-32G AF460-32P AF460-32R AF460-32S AF460-32 AF460-32PUR 35.5mm
63.5mm 2-1/2” AF460-40BLK AF460-40BL AF460-40G AF460-40P AF460-40R AF460-40S AF460-40 AF460-40PUR 37.5mm
76.2mm 3” AF460-48BLK AF460-48BL AF460-48G AF460-48P AF460-48R AF460-48S AF460-48 AF460-48PUR 39.5mm

BILLET ALLOY CAPS Note: Cap only NO neck included

Bore Black Blue Gold Polished Red Silver Raw Purple
FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

25.4mm 1” AF59-460-16BLK AF59-460-16BL AF59-460-16G AF59-460-16P AF59-460-16R AF59-460-16S AF59-460-16 AF59-460-16PUR

38.1mm 1-1/2” AF59-460-24BLK AF59-460-24BL AF59-460-24G AF59-460-24P AF59-460-24R AF59-460-24S AF59-460-24 AF59-460-24PUR
50.8mm 2” AF59-460-32BLK AF59-460-32BL AF59-460-32G AF59-460-32P AF59-460-32R AF59-460-32S AF59-460-32 AF59-460-32PUR
63.5mm 2-1/2” AF59-460-40BLK AF59-460-40BL AF59-460-40G AF59-460-40P AF59-460-40R AF59-460-40S AF59-460-40 AF59-460-40PUR
76.2mm 3” AF59-460-48BLK AF59-460-48BL AF59-460-48G AF59-460-48P AF59-460-48R AF59-460-48S AF59-460-48 AF59-460-48PUR

REPLACEMENT O-RINGS FOR BILLET ALLOY CAPS Bore Part No

Kit includes 1x EPR O-ring and 1x Buna N O-ring. This kit is to replace the 25.4mm 1” AF460-16-KIT
standard viton o-ring for Nitro and methanol / E85 applications. 38.1mm 1-1/2” AF460-24-KIT
50.8mm 2” AF460-32-KIT
63.5mm 2-1/2” AF460-40-KIT
Bore 76.2mm 3” AF460-48-KIT
Cap I.D.

Neck O.D.

BILLET CAP & NECK SIZE CHART

Part No Bore Neck O.D. Cap I.D.
-16 25mm 1” 33mm 1-5/16” 31mm 1-7/32”
-24 38mm 1-1/2” 46mm 1-13/16” 44mm 1-47/64”
-32 50.8mm 2” 61.8mm 2-7/16” 60mm 2-3/8”
-40 63.5mm 2-1/2” 76.2mm 3” 73.8mm 2-29/32”
-48 76.2mm 3” 89mm 3-1/2” 86.7mm 3-27/64” WELD ON FILLER NECK & CAP
WITH ROLL OVER VALVE
Universal filler neck and cap with a rollover valve / vent incorporated into the
cap. 50.8mm (2”) bore size. 35.5mm (1-25/64”) high.

Part No Cap Colour

STAINLESS STEEL AF460-32-RV

AF460-32-RV-BL
Raw finish
Blue
WELD ON NECK ONLY AF460-32-RV-BLK
AF460-32-RV-G
Black
Gold
AF460-32-RV-P Polished
Bore 316 Stainless Steel AF460-32-RV-PUR Purple
AF460-32-RV-R Red
25.4mm 1” AF460-16BSS AF460-32-RV-S Silver
38.1mm 1-1/2” AF460-24BSS
50.8mm 2” AF460-32BSS
63.5mm 2-1/2” AF460-40BSS
76.2mm 3” AF460-48BSS
Note: Neck only NO CAP included

390 aeroflowperformance.com
 WELD-ONS

LOW PROFILE BILLET ALLOY WELD ON FILLER & CAP

Aeroflow’s lightweight, non-vented filler caps feature a low profile aluminium weld-on which make them perfect for tight clearance applications. These caps are
manufactured from 6061-T6 aluminium and are supplied with a BUNA-N (great for a wide range of fuels and oils) and EPR O-Ring seals (for use with Nitro
methane fuels). Available 1-1/2”, 2”, 2-1/2” and 3” diameters in blue, red, Black, gold, purple, raw, polished and silver anodized finishes.

Bore Black Blue Gold Polished Red Silver Raw Purple Height
38.1mm 1-1/2” AF465-24BLK AF465-24BL AF465-24G AF465-24P AF465-24R AF465-24S AF465-24 AF465-24PUR 20mm
50.8mm 2” AF465-32BLK AF465-32BL AF465-32G AF465-32P AF465-32R AF465-32S AF465-32 AF465-32PUR 20mm
63.5mm 2-1/2” AF465-40BLK AF465-40BL AF465-40G AF465-40P AF465-40R AF465-40S AF465-40 AF465-40PUR 20mm
76.2mm 3” AF465-48BLK AF465-48BL AF465-48G AF465-48P AF465-48R AF465-48S AF465-48 AF465-48PUR 20mm

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

Bore Part No
REPLACEMENT O-RINGS FOR 38.1mm 1-1/2” AF59-465-24
LOW PROFILE BILLET ALLOY CAPS 50.8mm
63.5mm
2”
2-1/2”
AF59-465-32
AF59-465-40
Kit includes 1x EPR O-ring and 1x Buna N O-ring. 76.2mm 3” AF59-465-48

BILLET SPACERS
WELD ON BILLET RADIATOR NECKS These billet alluminium spacers are perfect for spacing and mounting
fabricated parts. They can be welded to the part or just inserted between
the part and mounting surface to provide the required clearance. They are
Part No ID Description supplied in a pack of 4 (2 x 5.5mm and 2 x 11.5mm) (2 x 7/32” and 2 x 29/64”).

AF64-0032 32mm 1-1/4” Raw finish, small cap I.D. Size Finish
Part No
AF64-0042 42mm 1-21/32” Raw finish, large cap
AF64-4375 M6 (1/4”) Silver
AF64-4375BLK M6 (1/4”) Black
AF64-4376 M8 (5/16”) Silver
AF64-4376BLK M8 (5/16”) Black
AF64-4377 M10 (3/8”) Silver
AF64-4377BLK M10 (3/8”) Black

ALUMINIUM PUSH LOCK WELD ON

Barb Part No
9.52mm 3/8” AF997-06
12.7mm 1/2” AF997-08
15.8mm 5/8” AF997-10
19.05mm 3/4” AF997-12
UNIVERSAL DRAIN VALVE
This universal valve with -10 ORB or 3/8” NPT male is suitable for use as a
drain plug on various tanks. Exit incorporates a 1/8” NPT female thread for
connection of drain tube.

ALUMINIUM BARB WELD ON Part No Colour Description

AF615-01S Silver 3/8” NPT Drain valve.
Barb Part No AF615-01BLK Black 3/8” NPT Drain valve.
8mm 5/16” AF995-05 AF615-00S Silver -10 ORB Drain valve.
9.6mm 3/8” AF995-06 AF615-00BLK Black -10 ORB Drain valve.
12.8mm 1/2” AF995-08
aeroflowperformance.com 391
 WELD-ONS

WELD ON INJECTOR BUNG (1 per pack)

Aeroflow weld on injector bungs can be used in two ways. the manifold can
be drilled to 16mm (5/8”) to suit an o-ring seal or simply remove the o-ring
and weld them directly to the manifold.

Part No Description WELD ON MALE AN FITTINGS

AF888 Weld on injector bung
14mm (9/16”) & 16mm (5/8”) Female / 16mm (5/8”) Male AN Aluminium Steel CS1030 316 Stainless Steel
-3 AF999-03D AF999-03S AF999-03SS
-4 AF999-04D AF999-04S AF999-04SS
-6 AF999-06D AF999-06S AF999-06SS
-8 AF999-08D AF999-08S AF999-08SS
-10 AF999-10D AF999-10S AF999-10SS
-12 AF999-12D AF999-12S AF999-12SS
-16 AF999-16D AF999-16S AF999-16SS
-20 AF999-20D AF999-20S AF999-20SS
These part numbers are available in packs of 25 fittings.
Add -25 to end of part number eg. AF999-06D-25

WELD ON DIFF FILLER

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

38.1mm (1-1/2”) O.D. steel bung with black anodised aluminium cap easy to
weld to axle housing for use as diff oil filler.

Part No Description
AF461-20 38.1mm (1-1/2”) O.D. Weld-on diff oil filler

WELD ON O2 SENSOR BUNG & PLUG

All sensors have M18 x 1.5mm thread
WELD ON EGT BUNG & CAP
EGT K-Style weld on 7/16”-20 Suits 6.35mm (1/4”) probe Part No Description Per Pack
AF991 Weld on O2 sensor bung Steel CS1030 Single
Part No Description AF991SS Weld on O2 sensor bung 304 Stainless steel Single
AF989-04S CS1030 Steel AF992 Screw in O2 sensor plug Zinc coated steel Single
AF989-04SS 316 Stainless Steel AF992SS Screw in O2 sensor plug 304 Stainless steel Single
AF991-25 Weld on O2 sensor bung Steel CS1030 25 pack
AF991SS-25 Weld on O2 sensor bung 304 Stainless steel 25 pack
AF992-25 Screw in O2 sensor plug Zinc coated steel 25 pack
AF992SS-25 Screw in O2 sensor plug 304 Stainless steel 25 pack

WELD ON EGT BUNG ONLY

EGT K-Style weld on 7/16”-20 Suits 6.35mm (1/4”) probe

Part No Description
AF989-04S-01 CS1030 Steel
AF989-04SS-01 316 Stainless Steel

WELD ON MALE HEX AN FITTINGS WELD-IN NOZZLE FITTINGS

Designed with a hex nut for ease of installation when welding. Features an 1/16 NPT internal thread. 19mm (3/4”) overall length
internal boss to accept hard line in each size.

Part No Description
AN Hard Line Aluminium Steel 316 Stainless
AF994-01 Pack of 8 weld in nozzle fittings
-6AN 3/8” AF999-06DH AF999-06SH AF999-06SSH AF994-0101 weld in nozzle fiting ONE ONLY
-8AN 1/2” AF999-08DH AF999-08SH AF999-08SSH
-10AN 5/8” AF999-10DH AF999-10SH AF999-10SSH
-12AN 3/4” AF999-12DH AF999-12SH AF999-12SSH

392 aeroflowperformance.com
 STAINLESS TUBE & BENDS

WELD ON FEMALE
METRIC

WELD ON FEMALE NPT TAPERED FITTINGS Thread Aluminium 6061-T6

M6 x 1.00 AF993-M6D
Thread Aluminium Steel CS1030 316 Stainless M8 x 1.25 AF993-M8D
M10 x 1.5 AF993-M10D
3.18mm 1/8” AF998-02D AF998-02S AF998-02SS
6.35mm 1/4” AF998-04D AF998-04S AF998-04SS
9.53mm 3/8” AF998-06D AF998-06S AF998-06SS
12.7mm 1/2” AF998-08D AF998-08S AF998-08SS
19mm 3/4” AF998-10D AF998-10S AF998-10SS
25.4mm 1” AF998-12D AF998-12S AF998-12SS
STAINLESS STEEL
TUBE AND MANDREL BENDS
Aeroflow Performance’s range of 304 stainless steel mandrel bends and
exhaust accessories are perfect for intercooler, turbocharger, supercharger
and intake pipes. These pipes will not corrode or rust like coated or painted
steel pipes. High quality, contaminant free stainless produces clean weld
beads, for a show quality welding job!
NOTE: LEG SIZES ARE APPROXIMATE AND MAY VARY.
Tech Tip: To weld 304 stainless steel to 304 stainless steel, use of a 308
stainless steel filler rod is recommended. When welding mild steel to 304

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

stainless steel use of a 309 stainless steel filler rod is recommended.
WELD ON FEMALE METRIC FITTINGS
Thread Aluminium Steel CS1030 316 Stainless
M10 x 1.0 AF996-M10D AF996-M10S AF996-M10SS
M12 x 1.5 AF996-M12D AF996-M12S AF996-M12SS
M14 x 1.5 AF996-M14D AF996-M14S AF996-M14SS
M16 x 1.5 AF996-M16D AF996-M16S AF996-M16SS

STRAIGHT STAINLESS STEEL TUBE

Diameter (O.D.) Part No Wall Length
31.75mm 1-1/2” AF9501-1500 1.50mm 1/16” 1 metre 3.3ft
41mm 1-5/8” AF9501-1625 1.50mm 1/16” 1 metre 3.3ft
44.5mm 1-3/4” AF9501-1750 1.50mm 1/16” 1 metre 3.3ft
47.5mm 1-7/8” AF9501-1875 1.50mm 1/16” 1 metre 3.3ft
51mm 2” AF9501-2000 1.50mm 1/16” 1 metre 3.3ft
WELD ON FEMALE ORB 54mm 2-1/8” AF9501-2012 1.50mm 1/16” 1 metre 3.3ft
57mm 2-1/4” AF9501-2250 1.50mm 1/16” 1 metre 3.3ft
60mm 2-3/8” AF9501-2380 1.50mm 1/16” 1 metre 3.3ft
Thread Aluminium Steel CS1030 316 Stainless 63mm 2-1/2” AF9501-2500 1.50mm 1/16” 1 metre 3.3ft
70mm 2-3/4” AF9501-2750 1.50mm 1/16” 1 metre 3.3ft
-3 AF996-03D AF996-03S AF996-03SS
75mm 3” AF9501-3000 1.50mm 1/16” 1 metre 3.3ft
-4 AF996-04D AF996-04S AF996-04SS
88mm 3-1/2” AF9501-3500 1.50mm 1/16” 1 metre 3.3ft
-6 AF996-06D AF996-06S AF996-06SS
102mm 4” AF9501-4000 1.50mm 1/16” 1 metre 3.3ft
-8 AF996-08D AF996-08S AF996-08SS
114.3mm 4-1/2” AF9501-4500 1.50mm 1/16” 1 metre 3.3ft
-10 AF996-10D AF996-10S AF996-10SS
127mm 5” AF9501-5000 1.50mm 1/16” 1 metre 3.3ft
-12 AF996-12D AF996-12S AF996-12SS
-16 AF996-16D AF996-16S AF996-16SS

Leg Leg

45o STAINLESS STEEL MANDREL BEND

Diameter (O.D.) Part No Wall Leg Length
41mm 1-5/8” AF9502-1625 1.50mm 1/16” 150mm 6”
WELD IN ALLOY PLATE 44mm 1-3/4”
48mm 1-7/8”
AF9502-1750
AF9502-1875
1.50mm
1.50mm
1/16”
1/16”
150mm
150mm
6”
6”
Aeroflow Performance Weld in alloy plate with 3 x -6 ORB female ports. Can 51mm 2” AF9502-2000 1.50mm 1/16” 150mm 6”
be welded in to any alloy pipe for vacuum ports or breather return. 57mm 2-1/4” AF9502-2250 1.50mm 1/16” 150mm 6”
63mm 2-1/2” AF9502-2500 1.50mm 1/16” 150mm 6”
75mm 3” AF9502-3000 1.50mm 1/16” 150mm 6”
Part No Measurements 88mm 3-1/2” AF9502-3500 1.50mm 1/16” 150mm 6”
102mm 4” AF9502-4000 1.50mm 1/16” 150mm 6”
AF986-06 Overall Length 85mm (3-11/32”)
114.3mm 4-1/2” AF9502-4500 1.50mm 1/16” 150mm 6”
Overall Width 35mm (1-25/64”)
127mm 5” AF9502-5000 1.50mm 1/16” 150mm 6”
Overall thickness 9mm (23/64”)

aeroflowperformance.com 393
 STAINLESS TUBE & BENDS

O.D.

Leg Leg

LEG CLR

90o STAINLESS STEEL MANDREL BEND 180o STAINLESS STEEL J BEND

Diameter (O.D.) Part No Wall Leg Length
Diameter (O.D.) Part No Wall Leg Length
31.75mm 1-1/4” AF9506-1250 1.50mm 1/16” 150/300mm 6”/12”
41mm 1-5/8” AF9503-1625 1.50mm 1/16” 150mm 6” 41mm 1-5/8” AF9506-1625 1.50mm 1/16” 150/300mm 6”/12”
44mm 1-3/4” AF9503-1750 1.50mm 1/16” 150mm 6” 44.5mm 1-3/4” AF9506-1750 1.50mm 1/16” 150/300mm 6”/12”
48mm 1-7/8” AF9503-1875 1.50mm 1/16” 150mm 6” 47.5mm 1-7/8” AF9506-1875 1.50mm 1/16” 150/300mm 6”/12”
51mm 2” AF9503-2000 1.50mm 1/16” 150mm 6” 51mm 2” AF9506-2000 1.50mm 1/16” 150/300mm 6”/12”
57mm 2-1/4” AF9503-2250 1.50mm 1/16” 150mm 6” 54mm 2-1/8” AF9506-2012 1.50mm 1/16” 150/300mm 6”/12”
63mm 2-1/2” AF9503-2500 1.50mm 1/16” 150mm 6” 57mm 2-1/4” AF9506-2250 1.50mm 1/16” 150/300mm 6”/12”
75mm 3” AF9503-3000 1.50mm 1/16” 150mm 6” 60mm 2-3/8” AF9506-2380 1.50mm 1/16” 150/300mm 6”/12”
88mm 3-1/2” AF9503-3500 1.50mm 1/16” 150mm 6” 63mm 2-1/2” AF9506-2500 1.50mm 1/16” 150/300mm 6”/12”
102mm 4” AF9503-4000 1.50mm 1/16” 150mm 6” 70mm 2-3/4” AF9506-2750 1.50mm 1/16” 150/300mm 6”/12”
114.3mm 4-1/2” AF9503-4500 1.50mm 1/16” 150mm 6” 75mm 3” AF9506-3000 1.50mm 1/16” 150/300mm 6”/12”
FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

127mm 5” AF9503-5000 1.50mm 1/16” 150mm 6” 88mm 3-1/2” AF9506-3500 1.50mm 1/16” 150/300mm 6”/12”
102mm 4” AF9506-4000 1.50mm 1/16” 150/300mm 6”/12”

O.D.

LEG CLR
STAINLESS STEEL Y-PIPE
Diameter (O.D.) Part No Wall
63mm 2-1/2” AF9544-2500 1.50mm 1/16”
75mm 3” AF9544-3000 1.50mm 1/16”
88mm 3-1/2” AF9544-3500 1.50mm 1/16”

STANDARD DIMENSIONS for S/S tube

SIZE (O.D.) Wall Radius Leg
25mm 1” 1.50mm 1/16” 38.1mm 1-1/2” 150mm 6”
41mm 1-5/8” 1.50mm 1/16” 71.2mm 2-13/16” 150mm 6”
44.5mm 1-3/4” 1.50mm 1/16” 66.7mm 2-5/8” 150mm 6”
47.5mm 1-7/8” 1.50mm 1/16” 72mm 2-53/64” 150mm 6”
51mm
54mm
2”
2-1/8”
1.50mm
1.50mm
1/16”
1/16”
78mm
81mm
3”
3-3/16”
150mm
150mm
6”
6”
STAINLESS
57mm 2-1/4” 1.50mm 1/16” 86mm 3-3/8” 150mm 6” STEEL T-PIPE
60mm 2-3/8” 1.50mm 1/16” 90mm 3-35/64” 150mm 6”
63mm 2-1/2” 1.50mm 1/16” 95mm 3-3/4” 150mm 6”
70mm 2-3/4” 1.50mm 1/16” 105mm 4-1/8” 150mm 6”
75mm 3” 1.50mm 1/16” 114mm 4-31/64” 150mm 6” Diameter (O.D.) Part No Wall
88mm 3-1/2” 1.50mm 1/16” 134mm 5-7/64” 150mm 6” 63mm 2-1/2” AF9577-2500 1.50mm 1/16”
102mm 4” 1.50mm 1/16” 150mm 5-29/32” 150mm 6” 75mm 3” AF9577-3000 1.50mm 1/16”
127mm 5” 1.50mm 1/16” 187mm 7-3/8” 150mm 6” 88mm 3-1/2” AF9577-3500 1.50mm 1/16”

STAINLESS STEEL
TRANSITION CONE
2mm wall thickness
WELDING TIP
When welding our 316 grade stainless steel to 304 grade stainless
steel it is recomended that you use 308 filler rod. Part No Radius Length
AF9588-2550 63mm (2-1/2”) up to 5” / 127mm 100mm 4”
394 aeroflowperformance.com
 STAINLESS TUBE & BENDS

STAINLESS STEEL
FLEXIBLE JOINTS
Solid liner with directional flow heavy duty design

STAINLESS STEEL X-PIPE Diameter (I.D.) Part No Length

38mm 1-1/2” AF9500-1500 100mm 4”
Diameter (O.D.) Part No Wall 41mm 1-5/8” AF9500-1625 100mm 4”
44mm 1-3/4” AF9500-1750 100mm 4”
51mm 2” AF9508-2000 1.50mm 1/16” 51mm 2” AF9500-2000 100mm 4”
55mm 2-1/4” AF9508-2250 1.50mm 1/16” 57mm 2-1/4” AF9500-2250 100mm 4”
63mm 2-1/2” AF9508-2500 1.50mm 1/16” 63mm 2-1/2” AF9500-2500 100mm 4”
75mm 3” AF9508-3000 1.50mm 1/16” 75mm 3” AF9500-3000 100mm 4”
88mm 3-1/2” AF9508-3500 1.50mm 1/16” 88mm 3-1/2” AF9500-3500 100mm 4”
102mm 4” AF9508-4000 1.50mm 1/16” 102mm 4” AF9500-4000 100mm 4”
115mm 4-1/2” AF9500-4500 100mm 4”

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

STAINLESS STEEL DONUT
Diameter (O.D.) Part No Wall Radius 2 & 3 BOLT COPPER GASKETS
Aeroflow Performance now offer embossed copper 2 and 3 bolt exhaust
44.45mm 1-3/4” AF9511-1750 1.50mm 1/16” 1:1
flange gaskets to suit our CNC stainless flanges and outperform other
51mm 2” AF9511-2000 1.50mm 1/16” 1:1
gaskets because of its sealing beads that conform to the flange sealing
57.15mm 2-1/4” AF9511-2250 1.50mm 1/16” 1:1
surfaces and provide leak free performance. (2 Pack)
63mm 2-1/2” AF9511-2500 1.50mm 1/16” 1:1
75mm 3” AF9511-3000 1.50mm 1/16” 1:1
88mm 3-1/2” AF9511-3500 1.50mm 1/16” 1:1 Part No Description
102mm 4” AF9511-4000 1.50mm 1/16” 1:1
AF9558-2500 63.5mm (2-1/2”) I.D 2 bolt embossed copper gasket
Note: Centre spacing is 40mm (1.57”). Welded on outside ONLY
AF9558-3000 76.2mm (3”) I.D 2 bolt embossed copper gasket
AF9559-2500 63.5mm (2-1/2”) I.D 3 bolt embossed copper gasket
STAINLESS STEEL HALF DONUT AF9559-3000 76.2mm (3”) I.D 3 bolt embossed copper gasket
AF9559-3500 89mm (3-1/2”) I.D 3 bolt embossed copper gasket
AF9559-4000 101.6mm (4”) I.D 3 bolt embossed copper gasket
Diameter (O.D.) Part No Wall Radius
44.45mm 1-3/4” AF9510-1750 1.50mm 1/16” 1:1
51mm 2” AF9510-2000 1.50mm 1/16” 1:1
57.15mm 2-1/4” AF9510-2250 1.50mm 1/16” 1:1
63mm 2-1/2” AF9510-2500 1.50mm 1/16” 1:1
75mm 3” AF9510-3000 1.50mm 1/16” 1:1
88mm 3-1/2” AF9510-3500 1.50mm 1/16” 1:1
102mm 4” AF9510-4000 1.50mm 1/16” 1:1

STAINLESS
PIE CUTS 2 & 3 BOLT EXHAUST GASKETS
(Pack of 5) Aerolfow’s heavy duty exhaust gaskets are the perfect choice for high per-
formance engines, especially those supercharged or turbocharged where
the exhaust is pressurised and leaks are common. Design with a crimp
collar to seal off exhaust gases for a perfect seal. (2 Pack)
Diameter (O.D.) Part No Wall Radius
38mm 1-1/2” AF9589-1500 1.50mm 1/16” 1D Part No Description
44.5mm 1-3/4” AF9589-1750 1.50mm 1/16” 1D
51mm 2” AF9589-2000 1.50mm 1/16”
Radius
1D
AF9553-2500 63.5mm (2-1/2”) I.D 2 bolt gasket
AF9553-3000 76.2mm (3”) I.D 2 bolt gasket
63mm 2-1/2” AF9589-2500 1.50mm 1/16” 1D
AF9554-2500 63.5mm (2-1/2”) I.D 3 bolt gasket
75mm 3” AF9589-3000 1.50mm 1/16” 1D
AF9554-3000 76.2mm (3”) I.D 3 bolt gasket
88mm 3-1/2” AF9589-3500 1.50mm 1/16” 1D
AF9554-3500 89mm (3-1/2”) I.D 3 bolt gasket
102mm 4” AF9589-4000 1.50mm 1/16” 1D
aeroflowperformance.com 395
 EXHAUST & ACCESSORIES

AF9551-0005

AF9551-0001

AF9551-0004
FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

AF9551-0003

AF9551-0006

AF9551-0002

TURBO FLANGES
Aeroflow machines a variety of exhaust-turbo flanges all manufactured
from 9.5mm (3/8”) thick high quality 304 Stainless Steel.

Part No Description
INLET
AF9551-0001 GT25, GT28, Turbine inlet flange (T28)
AF9551-0002 GT30, GT35, Turbine inlet flange (T3)
AF9551-0003 TO4Z, GT42, GT45,Turbine inlet flange (T4)
AF9551-0004 GT42, GT45,GT51 turbine inlet flange (T5)

OUTLET
AF9551-0005 GT25, GT28, turbine outlet flange (T28) AF9551-0007
AF9551-0006 GT30, GT35, turbine outlet flange (T3)
AF9551-0007 GT42, GT45,GT51 turbine outlet flange (T4)

Note: measurements are in millimeters

396 aeroflowperformance.com
 EXHAUST & ACCESSORIES

3 BOLT S/S FLANGES

Aeroflow 3 bolt exhaust flanges are manufactured with our same
technique as our machined header flanges, machined 100% flat for a
sure seal! Available is sizes from 63.5mm (2-1/2”) to 101.6mm (4”).
2 BOLT STAINLESS STEEL FLANGES
Aeroflow 2 bolt exhaust flanges are manufactured with our same tech-
Part No Description
nique as our machined header flanges, machined 100% flat for a sure

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

seal! Available is sizes 9.5mm (2-1/2”) and 76mm (3”). AF9551-0011 63.5mm (2-1/2”) I.D
Stainless steel flanges (2 Pack)
Part No Description AF9551-0012 76mm (3”) I.D
Stainless steel flanges (2 Pack)
AF9551-0009 63.5mm (2-1/2”) I.D Stainless steel flanges (2 Pack) AF9551-0013 88.9mm (3-1/2”) I.D
AF9551-0010 76mm (3”) I.D Stainless steel flanges (2 Pack) Stainless steel flanges (2 Pack)
AF9551-0014 101.6mm (4”) I.D
Stainless steel flanges (2 Pack)

CNC STAINLESS STEEL HEADER FLANGES

Custom build your exhaust with high quality Aeroflow components. Aeroflow’s CNC
header flanges are manufactured from 9.5mm (3/8”) thick 304 Stainless Steel.
The Aeroflow header flanges are offered in a variety of sizes to meet your exhaust
building needs.

Part No Description
To Suit S/B CHEVY
AF9551-1000 41.3mm (1-5/8”) Round port header flanges suit S/B Chevy
AF9551-1001 44.5mm (1-3/4”) Square port header flanges suit S/B Chevy
AF9551-1002 47.6mm (1-7/8”) Square port header flanges suit S/B Chevy
AF9551-1010 50.8mm (2”) Spread port header flanges to suit S/B Chevy
AF9551-1011 Alloy adapter kit suit large pipes to small bolt pattern
To Suit B/B CHEVY
AF9551-1004 50.8mm (2”) Round port header flanges suit B/B Chevy
AF9551-1003 57.1mm (2-1/4”) Round port header flanges suit B/B Chevy
To Suit GM LS SERIES CHEVY
AF9551-1005 44.5mm (1-3/4”) Round port header flanges suit LS Chevy
AF9551-1015 AF9551-1006 47.6mm (1-7/8”) Round port header flanges suit LS Chevy
To Suit FORD CLEVELAND
AF9551-1016 AF9551-1007 AF9551-1007 44.5mm (1-3/4”) Oval port header flanges suit 302-351C
AF9551-1008 47.6mm (1-7/8”) Oval port header flanges suit 302-351C
AF9551-1009 50.8mm (2”) Oval port header flanges suit 302-351C
To Suit FORD WINDSOR
Dual bolt patern to suit adapters or 63mm (2-1/2”) exhaust bolt centres
AF9551-1012 44.5mm (1-3/4”) rectangle port header flanges suit 289-351W Brodix
AF9551-1013 44.5mm (1-3/4”) square port header flanges suit 289-351W Victor Jr
AF9551-1014 47.6mm (1-7/8”) square port header flanges suit 289-351W Victor Jr
AF9551-1002 AF9551-1015 50.8mm (2”) square port header flanges suit 289-351W Victor Jr
AF9551-1016 SBF Aluminium adapter kit suit 50.8mm (2”) bolt pattern.

aeroflowperformance.com 397
 EXHAUST & ACCESSORIES

th
Now wilease
e
Quick lRamp
C

REPLACEMENT QUICK RELEASE

V-BAND CLAMP
FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

Aeroflow Performance quick release V-Band clamp makes it easy to install

and remove exhaust systems and turbo parts. Great for racers and tuners,
these clamps make it easy to remove parts to gain access to vital components
easily as there are no hard to reach bolts or special tools needed. Simply
undo the clamp and you can remove the component easily.
NOTE; This is the outer V-band clamp only and can be used to replace bolt
V-BAND CLAMPS WITH FLANGES style V- band clamp.

Aeroflow V-Band kits are available in 6061-T6 aluminium, mild steel or 316 Part No Description
stainless steel weld flanges and a stainless steel quick release clamp. New
AF59-1250-01 31.7mm (1-1/4”) Replacement Clamp
self-aligning V design. The weld flanges have been designed with a male to
AF59-1500-01 38.1mm (1-1/2”) Replacement Clamp
female connection which not only helps align the bands but also provides
AF59-1750-01 44.4mm (1-3/4”) Replacement Clamp
multiple sealing surfaces which prevent leaks and warping. Mild steel weld
AF59-2000-01 50.8mm (2”) Replacement Clamp
flanges are plated in high lustre weld through coating to help prevent rust
AF59-2500-01 63.5mm (2-1/2”) Replacement Clamp
and corrosion.
AF59-3000-01 76.2mm (3”) Replacement Clamp
Note: Moly grease all threads before installation and removal.
AF59-3500-01 88.9mm (3-1/2”) Replacement Clamp
AF59-4000-01 101.6mm (4”) Replacement Clamp
AF59-5000-01 127mm (5”) Replacement Clamp
Part No ID Weld Rings
AF92-1500D 38.1mm (1-1/2”) Aluminium
AF92-1500 38.1mm (1-1/2”) Steel
AF92-1500SS 38.1mm (1-1/2”) Stainless Steel
AF92-1750D 44.4mm (1-3/4”) Aluminium
AF92-1750 44.4mm (1-3/4”) Steel
AF92-1750SS 44.4mm (1-3/4”) Stainless Steel REPLACEMENT V-BAND CLAMP
AF92-2000D 50.8mm (2”) Aluminium
AF92-2000 50.8mm (2”) Steel
Standard V-Band clamps are
AF92-2000SS 50.8mm (2”) Stainless Steel
available separately, these
AF92-2250D 57.15mm (2-1/4”) Aluminium
clamps is available separately in
AF92-2250 57.15mm (2-1/4”) Steel
all sizes that we offer in the kits,
AF92-2250SS 57.15mm (2-1/4”) Stainless Steel
31.75mm(1-1/4”) right through to
AF92-2500D 63.5mm (2-1/2”) Aluminium
127mm (5”) V-Bands.
AF92-2500 63.5mm (2-1/2”) Steel
AF92-2500SS 63.5mm (2-1/2”) Stainless Steel
AF92-2750D 70mm (2-3/4”) Aluminium
AF92-2750 70mm (2-3/4”) Steel
AF92-2750SS 70mm (2-3/4”) Stainless Steel
AF92-3000D 76.2mm (3”) Aluminium
AF92-3000 76.2mm (3”) Steel
AF92-3000SS 76.2mm (3”) Stainless Steel
AF92-3500D 88.9mm (3-1/2”) Aluminium
AF92-3500 88.9mm (3-1/2”) Steel
AF92-3500SS 88.9mm (3-1/2”) Stainless Steel
AF92-4000D 101.6mm (4”) Aluminium Part No Description
AF92-4000 101.6mm (4”) Steel
AF92-4000SS 101.6mm (4”) Stainless Steel AF59-1255-01 31.7mm (1-1/4”)
AF92-4500D 114.3mm (4-1/2”) Aluminium AF59-1555-01 38.1mm (1-1/2”)
AF92-4500 114.3mm (4-1/2”) Steel AF59-1755-01 44.4mm (1-3/4”)
AF92-4500SS 114.3mm (4-1/2”) Stainless Steel AF59-2055-01 50.8mm (2”)
AF92-5000D 127mm (5”) Aluminium AF59-2555-01 63.5mm (2-1/2”)
AF92-5000 127mm (5”) Steel AF59-3055-01 76.2mm (3”)
AF92-5000SS 127mm (5”) Stainless Steel AF59-3555-01 88.9mm (3-1/2”)
AF59-4055-01 101.6mm (4”)
AF59-5055-01 127mm (5”)

398 aeroflowperformance.com
 EXHAUST & ACCESSORIES

2 INTO 1 S/STEEL MERGE COLLECTORS

Aeroflow’s 2 into 1 merge collectors are made out of T304 stainless steel
that is durable enough to stand up to the elements and combine high flow
and high velocity to increase and broaden an engine’s torque curve. The
hand porting inside the collector ensures unrestricted, smooth exhaust
flow to prevent power loss and excessive backpressure.

Part No Description
AF2225-300 57.1mm (2-1/4”) primary’s into
76mm (3”) collector outlet diameter
AF2250-300 63.5mm (2-1/2”) primary’s into
76mm (3”) collector outlet diameter
AF2250-350 63.5mm (2-1/2”) primary’s into

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

89mm (3-1/2”)collector outlet diameter

4 INTO 1 S/STEEL MERGE COLLECTORS

Aeroflow’s 4 into 1 merge collectors are made out of T304 stainless steel
that is durable enough to stand up to the elements and combine high flow
and high velocity to increase and broaden an engine’s torque curve. The
hand porting inside the collector ensures unrestricted, smooth exhaust
flow to prevent power loss and excessive backpressure.

Part No Description
AF4175-300 44.5mm (1-3/4”) primary’s into LS1 / 6 BLOCK HUGGERS
76mm (3”) collector outlet diameter The Aeroflow Performance block hugger headers are a universal
AF4187-350 47.6mm (1-7/8”) primary’s into fitment to suit the GM LS1/LS6 They are a retro fit, tight fit block hugger
(89mm) 3-1/2” collector outlet diameter designed for use in conversion cars.
AF4200-350 50.8mm (2”) primary’s into This header kit will includes:
89mm (3-1/2”) collector outlet diameter 2x header manifolds
AF4212-400 54mm (2-1/8”) primary’s into 2x exhaust manifold gaskets
101.6mm (4”) collector outlet diameter 2x collector flanges
AF4225-400 57.1mm (2-1/4”) primary’s into 2x 3-bolt collector gaskets
101.6mm (4”) collector outlet diameter 2x weld-in 02 sensor bungs
AF4250-450 63.5mm (2-1/2”) primary’s into 12x M8x1.25mm header bolts
114.3mm (4-1/2”) collector outlet diameter 6x 3/8”-24 bolts/nuts/washer
AF59-4175 Replacement tab kit
Specs are :
Primary tube diameter is 41.28mm (1-5/8”)
Collector diameter is 38.1mm (2-1/2”)
Round Port 42.4 x 42.4mm (1.67” x 1.67”)

Dimensions are :
Width of header at widest point from exhaust port 104.9mm (4.13”)
Height of header from top of flange to lowest point 311.15mm (12.25”)

S/STEEL MERGE COLLECTOR TAB KIT Part No Description

Aeroflow’s stainless steel collector tap kits are great as a quick release
AF9599-1001 Suit GM LS series engines Steel/Black
fastener system for securing your exhuast to the collector, simply weld the
AF9599-1002 Suit GM LS series engines Stainless Steel
tabs to each section, slip together and fasten.

Part No Description
AF59-4175 Merge collector tab kit

aeroflowperformance.com 399
 EXHAUST & ACCESSORIES

FORD FLAT HEAD BLOCK HUGGERS METALLIC

Aeroflow Performance stainless steel centre dump headers are a universal
CATALYTIC
fitment to suit the 1932-1953 Ford V8 Flathead. These are manufactured CONVERTERS
from high tubular steel and is not recommended for use with the stock Ford
wishbone front suspension. Aeroflow’s universal catalytic converter is a metallic substrate material
This header kit will include the following: encased in a full brushed 304 stainless steel round body. Designed for
2x header manifolds performance exhaust systems theses Hi-flow 50 cells per inch honey comb
2x 4 bolt square header flange converters are very low restriction so they don’t loose horsepower.
2x 4 bolt square gaskets
6x manifold exhaust gaskets Part No Description
4x 7/16”-14 header bolts
FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

4x 3/8”-16 header bolts 6 x 3/8”-24 bolts/nuts/washer AF9586-2500 63.5mm (2-1/2”) Slip fit
AF9586-3000 76.2mm (3”) Slip fit
Specs are: AF9586-3500 88mm (3-1/2”) Slip fit
Primary tube diameter is 44.45mm (1-3/4”) AF9586-4000 102mm (4”) Slip fit
Collector diameter is 63.5mm (2-1/2”)
Round port 41.14 x 41.14mm (1.62” x 1.62”)

Dimensions are:
Width of header at widest point from exhaust port 154.95mm (6.10”)
Height of header from top of flange to lowest point 190.5mm (7.50”)

Part No Description
AF9599-1000 Suit flat head Ford engines Stainless Steel

BILLET ALUMINIUM EXHAUST HANGERS EXHAUST CONTROL VALVE

The perfect choice to hang your exhaust. Tough billet construction Do you want the benefit of having the full noise and power of an open
with soft hi-temp bushing to dampen exhaust vibration to your chassis. header at full throttle but also keeping it quiet for cruising the streets?
Available in black or polished. Thanks to Aeroflow Performance the boost activated exhaust control
Top of exhaust pipe to centre of mounting hole 34.9mm (1-3/8”) valve ( ECV ) you can have the best of both worlds. No more wiring up
Bracket thickness is 12.7mm (1/4”) expensive and unreliable electric exhaust cut-outs and no more climbing
underneath the car to open the manual exhaust cut-outs. It’s just a matter
Part No Finish ID Length Height of hooking up the boost referenced vacuum line or a mac valve solenoid
and you are ready to go. These ECV is for use with turbocharged vehicles
AF64-4130 Polished 50.8mm (2”) 101mm (3-63/64”) 125mm (4-59/64”) and will open the exhaust valve when boost reaches roughly 6-7psi. Allow-
AF64-4130BLK Black 50.8mm (2”) 101mm (3-63/64”) 125mm (4-59/64”) ing a quieter exhaust when driving around normally. The higher pressures
AF64-4131 Polished 57.15mm (2-1/4”) 101mm (3-63/64”) 125mm (4-59/64”) can be obtained with either a installing a manual boost controller or a mac
AF64-4131BLK Black 57.15mm (2-1/4”) 101mm (3-63/64”) 125mm (4-59/64”) valve solenoid.
AF64-4103 Polished 63.5mm (2-1/2”) 101mm (3-63/64”) 125mm (4-59/64”) The exhaust valve is normally closed for all applications. Installation
AF64-4103BLK Black 63.5mm (2-1/2”) 101mm (3-63/64”) 125mm (4-59/64”) requires fabrication work to weld into the current exhaust system with a
AF64-4104 Polished 76mm (3”) 115mm (4-33/64”) 138mm (5-7/6”) T-piece or Y-piece ( Sold Separately )
AF64-4104BLK Black 76mm (3”) 115mm (4-33/64”) 138mm (5-7/6”)
AF64-4106 Polished 89mm (3-1/2”) 127mm (5”) 150mm (5-29/32”)
AF64-4106BLK Black 89mm (3-1/2”) 127mm (5”) 150mm (5-29/32”) Part No Description
AF64-4107 Polished 101.6mm (4”) 140mm (5-33/64”) 167mm (6-37/64”)
AF64-4107BLK Black 101.6mm (4”) 140mm (5-33/64”) 167mm (6-37/64”) AF9590-3000 76.2mm (3”) exhaust control valve
AF59-4103 Replacement soft hi-temp bushing & alloy insert kit AF9590-3500 88.9mm (3.5”) exhaust control valve
AF59-4103BLK Replacement soft hi-temp bushing & black alloy insert kit AF9590-4000 101.6mm (4”) exhaust control valve

400 aeroflowperformance.com
 EXHAUST & ACCESSORIES

MUFFLERS 5000 SERIES

Aeroflow’s 5000 series mufflers are the perfect choice for today’s street
driven high horsepower muscle cars where both flow for maximum
performance and dB reduction are critical. Manufactured from durable 16
gauge TIG welded aluminised steel and coated in a high temp silver finish,

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

Aeroflow’s 5000 series mufflers are a chambered design for a consistent
sound that won’t change over time. When used as part of an appropriate
exhaust system they offer a throaty exhaust sound on acceleration and
quiet operation at idle and cruising speeds. These mufflers are available
in 3 configurations (Center/Center, Offset/Center and Offset/Offset) with STAINLESS STEEL MUFFLERS 5500 SERIES
inlet/outlet sizes in both 2-1/2” (63.5mm) and 3” (76mm). Compact case
dimensions, length 13”/ 330mm, width 10”/ 255mm and height 4-1/4” Aeroflow’s 5500 series mufflers are the perfect choice for today’s street
(110mm) will fit many applications, perfect for the single system or classic driven high horsepower turbo cars where both flow for maximum perfor-
muscle car dual exhaust. mance and dB reduction are critical. Manufactured from durable 16 gauge
TIG welded 304 stainless steel. Aeroflow’s 5500 series mufflers are a
packed style with perforated tube design that aids performance. These
Part No Description mufflers are available in 3 configurations, Center/Center, Offset/Center
and Offset/Offset with inlet/outlet sizes in both 2-1/2” (63.5mm)
AF5000-250 63.5mm (2-1/2”) offset / offset, 330mm (13”) length, and 3” (76.2mm).
254mm (10”) width, 108mm (4-1/4”) height Compact case dimensions:
AF5000-300 76.2mm (3”) offset / offset, 330mm (13”) length, Length 13-3/4” 350mm
254mm (10”) width, 108mm (4-1/4”) height Width 9-1/2” 241mm
AF5001-250 63.5mm (2-1/2”) offset / center, 330mm (13”) length, Height 5-5/16 135mm
254mm (10”) width, 108mm (4-1/4”) height Will fit many applications, perfect for the single system or dual exhaust.
AF5001-300 76.2mm (3”) offset / center, 330mm (13”) length,
254mm (10”) width, 108mm (4-1/4”) height
AF5011-250 63.5mm (2-1/2”) center / center, 330mm (13”) length,
Part No Description
254mm (10”) width, 108mm (4-1/4”) height AF5500-250 63.5mm (2-1/2”) offset / offset
AF5011-300 76.2mm (3”) center / center, 330mm (13”) length, AF5500-300 76.2mm (3”) offset / offset
254mm (10”) width, 108mm (4-1/4”) height AF5501-250 63.5mm (2-1/2”) offset / center
AF5501-300 76.2mm (3”) offset / center
AF5511-250 63.5mm (2-1/2”)center / center
AF5511-300 76.2mm (3”)center / center

aeroflowperformance.com 401
 ALUMINIUM TUBE & BENDS

ALUMINIUM TUBE AND MANDREL BENDS

Aeroflow Performance has introduced a new range of quality universal aluminium bends. Our mandrel bends are
premium quality T6063 grade aluminium. Our bends are perfect for intercooler, turbocharger, supercharger and intake
pipes. These pipes will not corrode or rust like coated or painted steel pipes and are much lighter than stainless pipes.
Aeroflow’s aluminium, when welding, produces contaminant free beads, for a show quality welding job!
NOTE: LEG SIZES ARE APPROXIMATE AND MAY VARY.

ALUMINIUM
TRANSITION CONE
Part No Radius Length
STRAIGHT 12” (300mm) LONG
ALUMINIUM TUBE AF8688-2050 50.8mm (2”) up to 127mm (5”) 100mm 4”

Leg Leg
Diameter (O.D.) Part No Wall
25.4mm 1” AF8601-100 1.63mm 1/16”
31.7mm 1-1/4” AF8601-125 1.63mm 1/16”
38.1mm 1-1/2” AF8601-150 1.63mm 1/16”
44.4mm 1-3/4” AF8601-175 1.63mm 1/16”
51mm 2” AF8601-200 1.63mm 1/16”
57mm
63mm
2-1/4”
2-1/2”
AF8601-225
AF8601-250
1.63mm
2.03mm
1/16”
5/64”
30o ALUMINIUM MANDREL BEND
70mm 2-3/4” AF8601-275 2.03mm 5/64”
75mm 3” AF8601-300 2.03mm 5/64” Diameter (O.D.) Part No Wall Leg Length
88mm 3-1/2” AF8601-350 2.03mm 5/64”
FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

102mm 4” AF8601-400 2.03mm 5/64” 25.4mm 1” AF8607-100 1.63mm 1/16” Leg5-1/2”

140mm
127mm 5” AF8601-500 3.00mm 1/8” 51mm 2” AF8607-200 1.63mm 1/16” 140mm 5-1/2”
57mm 2-1/4” AF8607-225 1.63mm 1/16” 140mm 5-1/2”
63mm 2-1/2” AF8607-250 2.03mm 5/64” 140mm 5-1/2”
70mm 2-3/4” AF8607-275 2.03mm 5/64” 140mm 5-1/2”
75mm 3” AF8607-300 2.03mm 5/64” 140mm 5-1/2”
88mm 3-1/2” AF8607-350 2.03mm 5/64” 165mm 6-3/16”
102mm 4” AF8607-400 2.03mm 5/64” 185mm 7-9/32”
STRAIGHT 3.3 FT (1m) LONG
ALUMINIUM TUBE Leg Leg

Diameter (O.D.) Part No Wall

25.4mm 1” AF8601-100L 1.63mm 1/16”
31.7mm 1-1/4” AF8601-125L 1.63mm 1/16”
38.1mm 1-1/2” AF8601-150L 1.63mm 1/16”
44.4mm 1-3/4” AF8601-175L 1.63mm 1/16”
51mm 2” AF8601-200L 1.63mm 1/16” 45o ALUMINIUM MANDREL BEND
57mm 2-1/4” AF8601-225L 1.63mm 1/16”
63mm 2-1/2” AF8601-250L 2.03mm 5/64”
70mm 2-3/4” AF8601-275L 2.03mm 5/64”
Diameter (O.D.) Part No Wall Leg Length
75mm 3” AF8601-300L 2.03mm 5/64” 25.4mm 1” AF8602-100 1.63mm 1/16” 140mm 5-1/2”
88mm 3-1/2” AF8601-350L 2.03mm 5/64” 31.7mm 1-1/4” AF8602-125 1.63mm 1/16” 140mm 5-1/2”
102mm 4” AF8601-400L 2.03mm 5/64” 38.1mm 1-1/2” AF8602-150 1.63mm 1/16” 140mm 5-1/2”
127mm 5” AF8601-500L 3.00mm 1/8” 44.4mm 1-3/4” AF8602-175 1.63mm 1/16” 140mm 5-1/2”
51mm 2” AF8602-200 1.63mm 1/16” 140mm 5-1/2”
57mm 2-1/4” AF8602-225 1.63mm 1/16” 140mm 5-1/2”
63mm 2-1/2” AF8602-250 2.03mm 5/64” 140mm 5-1/2”
70mm 2-3/4” AF8602-275 2.03mm 5/64” 140mm 5-1/2”
75mm 3” AF8602-300 2.03mm 5/64” 140mm 5-1/2”
88mm 3-1/2” AF8602-350 2.03mm 5/64” 165mm 6-3/16”
102mm 4” AF8602-400 2.03mm 5/64” 185mm 7-9/32”
127mm 5” AF8602-500 3.00mm 1/8” 185mm 7-9/32”

LEG Leg Leg

CLR O.D.

STANDARD DIMENSIONS 60o ALUMINIUM MANDREL BEND

SIZE (O.D.) Wall Radius Leg Diameter (O.D.) Part No Wall Leg Length
51mm 2” 1.63mm 1/16” 78mm 3” 140mm 5-1/2” 24.5mm 1” AF8608-100 1.63mm 1/16” 140mm 5-1/2”
57mm 2-1/4” 2.03mm 1/16” 86mm 3-3/8” 140mm 5-1/2” 51mm 2” AF8608-200 1.63mm 1/16” 140mm 5-1/2”
63mm 2-1/2” 2.03mm 5/64” 95mm 3-3/4” 140mm 5-1/2” 57mm 2-1/4” AF8608-225 1.63mm 1/16” 140mm 5-1/2”
70mm 2-3/4” 2.03mm 5/64” 4-1/8” 105mm 140mm 5-1/2” 63mm 2-1/2” AF8608-250 2.03mm 5/64” 140mm 5-1/2”
75mm 3” 2.03mm 5/64” 4-31/64” 114mm 140mm 5-1/2” 70mm 2-3/4” AF8608-275 2.03mm 5/64” 140mm 5-1/2”
88mm 3-1/2” 2.03mm 5/64” 5-7/64” 134mm 165mm 6-3/16” 75mm 3” AF8608-300 2.03mm 5/64” 140mm 5-1/2”
102mm 4” 2.03mm 5/64” 5-29/32” 150mm 185mm 7-9/32” 88mm 3-1/2” AF8608-350 2.03mm 5/64” 165mm 6-3/16”
127mm 5” 3.00mm 1/8” 7-3/8” 187mm 185mm 7-9/32” 102mm 4” AF8608-400 2.03mm 5/64” 185mm 7-9/32”

402 aeroflowperformance.com
 ALUMINIUM TUBE & BENDS

Leg Leg

90o ALUMINIUM MANDREL BEND

Diameter (O.D.) Part No Wall Leg Length ALUMINIUM DONUT
25.4mm 1” AF8603-100 1.63mm 1/16” 140mm 5-1/2”
31.7mm 1-1/4” AF8603-125 1.63mm 1/16” 140mm 5-1/2”
Diameter (O.D.) Part No Wall Radius
38.1mm 1-1/2” AF8603-150 1.63mm 1/16” 140mm 5-1/2” 25.4mm 1” AF8610-100 2.03mm 5/64” .075:1
44.4mm 1-3/4” AF8603-175 1.63mm 1/16” 140mm 5-1/2” 51mm 2” AF8610-200 2.03mm 5/64” .075:1
51mm 2” AF8603-200 1.63mm 1/16” 140mm 5-1/2” 63mm 2-1/2” AF8610-250 2.03mm 5/64” .075:1
57mm 2-1/4” AF8603-225 1.63mm 1/16” 140mm 5-1/2” 75mm 3” AF8610-300 2.03mm 5/64” .075:1
63mm 2-1/2” AF8603-250 2.03mm 5/64” 140mm 5-1/2” 88mm 3-1/2” AF8610-350 2.03mm 5/64” .075:1
70mm 2-3/4” AF8603-275 2.03mm 5/64” 140mm 5-1/2” 102mm 4” AF8610-400 2.03mm 5/64” .075:1
75mm 3” AF8603-300 2.03mm 5/64” 140mm 5-1/2” 127mm 5” AF8610-500 3.00mm 1/8” .075:1
88mm 3-1/2” AF8603-350 2.03mm 5/64” 165mm 6-3/16” Note: Centre spacing is 40mm (1.57”). Welded on outside ONLY
102mm 4” AF8603-400 2.03mm 5/64” 185mm 7-9/32”
127mm 5” AF8603-500 3.00mm 1/8” 185mm 7-9/32”

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

Leg
g
Le

ALUMINIUM HALF DONUT

135o ALUMINIUM MANDREL BEND
Diameter (O.D.) Part No Wall Radius
Diameter (O.D.) Part No Wall Leg Length 25.4mm 1” AF8600-100 2.03mm 5/64” .075:1
51mm 2” AF8600-200 2.03mm 5/64” .075:1
25.4mm 1” AF8605-100 1.63mm 1/16” 140mm 5-1/2” 63mm 2-1/2” AF8600-250 2.03mm 5/64” .075:1
51mm 2” AF8605-200 1.63mm 1/16” 140mm 5-1/2” 75mm 3” AF8600-300 2.03mm 5/64” .075:1
57mm 2-1/4” AF8605-225 1.63mm 1/16” 140mm 5-1/2” 88mm 3-1/2” AF8600-350 2.03mm 5/64” .075:1
63mm 2-1/2” AF8605-250 2.03mm 5/64” 140mm 5-1/2” 102mm 4” AF8600-400 2.03mm 5/64” .075:1
70mm 2-3/4” AF8605-275 2.03mm 5/64” 140mm 5-1/2” 127mm 5” AF8600-500 3.00mm 1/8” .075:1
75mm 3” AF8605-300 2.03mm 5/64” 140mm 5-1/2”
88mm 3-1/2” AF8605-350 2.03mm 5/64” 165mm 6-3/16”
102mm 4” AF8605-400 2.03mm 5/64” 185mm 7-9/32”

Leg Leg

Produces a bead that is approx

2mm (5/64”) tall and
180o ALUMINIUM MANDREL BEND 6.5mm(1/4”) wide.
CLR LEG
Diameter (O.D.) Part No Wall Leg Length Leg
PIPE BEADING TOOL (Large bore)
25.4mm 1” AF8606-100 1.63mm 1/16” 140mm 5-1/2”
Great for beading pipe from 15.87mm (5/8”) to 152.4mm (6”) diameter.
51mm 2” AF8606-200 1.63mm 1/16” 140mm 5-1/2”
Material thickness: aluminium up to 1.65mm (.065”) and
57mm 2-1/4” AF8606-225 1.63mm 1/16” 140mm 5-1/2”
stainless steel / steel pipe up to 1.25mm (.050”)
63mm 2-1/2” AF8606-250 2.03mm 5/64” 140mm 5-1/2”
70mm 2-3/4” AF8606-275 2.03mm 5/64” 140mm 5-1/2”
75mm 3” AF8606-300 2.03mm 5/64” 140mm 5-1/2”
Part No Description
88mm 3-1/2” AF8606-350 2.03mm 5/64” 165mm 6-3/16” AF98-2017 15.87mm (5/8”) to 152.4mm (6”)
102mm 4” AF8606-400 2.03mm 5/64” 185mm 7-9/32”
aeroflowperformance.com 403
 CLAMPS & WELD ON ENDS

EFI CLAMPS Pack of 10

Part No Diameter (I.D.)
ALUMINIUM TANK ENDS AF26-0911

Suits 6.35mm (1/4”) -4AN hose adjustable
from 9mm (23/64”) to 11mm (7/16”)
Aeroflow aluminium tank ends allow making custom tanks a breeze. Simply AF26-1416 Suits 7.93mm (5/16”) -5AN & 9.52mm (3/8”) -6AN
weld these aluminum ends to your aluminium tubing and add some mounts. hose adjustable from 14mm (9/16) to 16mm (5/8)
Available in a machined 45 degree end or a smooth spun bowl style end,
allowing you to create a professional tank. Sizes range from 2.5”, 2.75”, 3.00”,
3.50”, 4.0”.

VACUUM HOSE SPRING CLAMPS Pack of 10

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

Part No Suits Vacuum Hose I.D.

AF27-012-10 Suits AF9031-012 and AF9231-012 8mm (5/16”)

MACHINED 45o ALUMINIUM TANK ENDS

AF27-016-10 Suits AF9031-016 and AF9231-016 9mm (23/64”)
AF27-018-10 Suits AF9031-018 and AF9231-018 10mm (25/64”)
AF27-025-10 Suits AF9031-025 and AF9231-025 12mm (15/32”)
Diameter (O.D.) Part No AF27-031-10 Suits AF9031-031 and AF9231-031 14mm (9/16”)
AF27-038-10 Suits AF9031-038 and AF9231-038 16.4mm (41/64”)
63mm 2-1/2” AF8620-2500
70mm 2-3/4” AF8620-2750
75mm 3” AF8620-3000
88mm 3-1/2” AF8620-3500
102mm 4” AF8620-4000

STAINLESS HOSE CLAMPS Packs of 10 clamps

Part No Diameter (I.D.)
SPUN BOWL STYLE ALUMINIUM TANK ENDS AF23-0612 6-12mm (15/64” - 15/32”) hose clamp
AF23-0916 9-16mm (23/64” - 41/64”)hose clamp
Diameter (O.D.) Part No AF23-1219 12-19mm (15/32” - 3/4”) hose clamp
AF23-1625 16-25mm (41/64” - 1”) hose clamp
63mm 2-1/2” AF8630-2500 AF23-1832 18-32mm (23/32 - 1-17/64”) hose clamp
70mm 2-3/4” AF8630-2750 AF23-2144 21-44mm (53/64” -1-47/64”) hose clamp
75mm 3” AF8630-3000 AF23-2751 27-51mm (1-1/6” - 2-1/64”) hose clamp
88mm 3-1/2” AF8630-3500 AF23-3357 33-57mm (1-5/16” - 2-1/4”) hose clamp
102mm 4” AF8630-4000 AF23-4670 46-70mm (1-13/16” - 2-49/64”) hose clamp
AF23-6083 60-83mm (2-3/8” - 3-167/64”) hose clamp
AF23-7692 76-92mm (3” - 3-5/8”) hose clamp
AF23-9114 91-114mm (3-19/32” - 4-31/64”) hose clamp
AF23-1352 130-152mm (5-1/8” - 5-63/64”) hose clamp
STAINLESS T-BOLT CLAMPS Sold Individually
Part No Diameter (I.D.) Clamp width Suits Silicon Size
AF24-4447 44-47mm (1-47/64” - 1-55/64”) 22mm (7/8) 35mm (1-3/8”), 38.1mm (1-1/2”)
AF24-4851 48-51mm (1-57/64” - 2-1/64”) 22mm (7/8) 40mm (1-5/8”)
AF24-5255 52-55mm (2-3/64” - 2-11/64”) 22mm (7/8) 44.4mm (1-3/4”)
AF24-5659 56-59mm (2-13/64” - 2-21/64”) 22mm (7/8)
AF24-6063 60-63mm (2-3/8” - 2-31/64”) 22mm (7/8) 50.8mm (2”)
AF24-6467 64-67mm (2-17/32” - 2-41/64”) 22mm (7/8) 54mm (2-1/8”), 57mm (2-1/4”)
AF24-6873 68-73mm (2-11/16” - 2-7/8”) 24mm (61/64) 60mm (2-3/8”)
AF24-7479 74-79mm (2-59/64” - 3-7/64”) 24mm (61/64) 63.5mm (2-1/2”), 67mm (2-5/8”)
AF24-8085 80-85mm (3-9/64” - 3.11/32”) 24mm (61/64) 70mm (2-3/4”)
AF24-8691 86-91mm (3-3/8” - 3-37/64”) 24mm (61/64) 76.2mm (3”) & 82mm (3-1/4”)
AF24-9297 92-97mm (3-5/8” - 3-13/16”) 24mm (61/64) 82mm (3-1/4”)
AF24-9813 98-103mm (3-55/64” - 4-3/64”) 24mm (61/64) 88mm (3-1/2”)
AF24-1412 104-112mm (4-3/32” - 4-13/32”) 24mm (61/64) 95mm (3-3/4”) & 101.6mm (4”)
AF24-1119 131-139mm (5-5/32” - 5-15/32) 26mm (1-1/32) 127mm (5”)

404 aeroflowperformance.com
 CLAMPS & ACCESSORIES

INTERCOOLER ALUMINIUM PIPE CLAMP

Aeroflow’s Intercooler Aluminium Pipe Clamps are made from billet 6061-T6
aluminium. It has a double O-ring grooved sleeve offering protection, absolute
sealing and flexibility. Easy bolt together design outer ring which is hard anod-
ized for robustness and wear resistance. The clamps are designed for all types
of applications including turbo piping, intercooler piping, cold air intakes and
custom applications.

Bore Black Blue Gold Polished Red Silver Purple

50.8mm 2” AF25-2000BLK AF25-2000BL AF25-2000G AF25-2000 AF25-2000R AF25-2000S AF25-2000PUR
63.5mm 2-1/2” AF25-2500BLK AF25-2500BL AF25-2500G AF25-2500 AF25-2500R AF25-2500S AF25-2500PUR
76.2mm 3” AF25-3000BLK AF25-3000BL AF25-3000G AF25-3000 AF25-3000R AF25-3000S AF25-3000PUR
88.9mm 3-1/2” AF25-3500BLK AF25-3500BL AF25-3500G AF25-3500 AF25-3500R AF25-3500S AF25-3500PUR
101.6mm 4” AF25-4000BLK AF25-4000BL AF25-4000G AF25-4000 AF25-4000R AF25-4000S AF25-4000PUR
Replacement Parts
AF59-2520 Replacement clamp O-rings suit 50.8mm (2”) clamp
AF59-2525 Replacement clamp O-rings suit 63.5mm (2-1/2”) clamp
AF59-2530 Replacement clamp O-rings suit 76.3mm (3”) clamp
AF59-2535 Replacement clamp O-rings suit 88.9mm (3-1/2”) clamp

FABRICATION, EXHAUST, ALLOY & STAINLESS TUBE & BENDS

AF59-2540 Replacement clamp O-rings suit 101.6mm (4”) clamp

VACUUM PORT ADAPTER

Aeroflow’s soft mount vacuum line fitting is designed to be inserted into a
silicone hose. Simply punch an 8mm (5/16”) hole into the silicone connector
and install. Each kit includes a CNC machined aluminium fitting, lock nut,
washer and O-ring seal. For use with Aeroflow 6mm (1/4”) I.D. vacuum hoses.
This fitting is designed to seal perfectly for all different silicone hose wall
thicknesses.

Part No Finish Description

AF9091-04 Stainless Steel 6mm (1/4”) barb vacuum port

CONSTANT TENSION CLAMP Sold Individually

Aeroflow Performance dual bead constant tension stainless steel hose
clamps are the most cost effective way to ensure a consistent seal on
your hoses without damage. The inner dual bead design puts band-
sealing pressure where it is needed, providing 30 percent more sealing
performance than standard worm drive clamps. This allows superb sealing
characteristics and is safe for all soft hose use such as air to air and cool-
ant applications. Torque setting 35-45in.lbs. (4.0 - 5.1Nm).
Clamp width 12.7mm (1/2”).

Part No Diameter (I.D.) Suits Silicon Size VACUUM BLANK OFF PLUGS
Aeroflow’s vacuum cap assortment is made from high quality silicone for
AF28-2639 26mm - 39mm ( 1.02” – 1.53” ) 3/4”, 7/8”, 1” durability. Able to withstand high under bonnet/hood temperatures. The kit
AF28-3956 39mm - 56mm ( 1.53” – 2.20” ) 1-1/4” , 1-1/2” , 1-3/4” includes 4 pcs 1/8” (3.17mm), 4 pcs 3/16” (4.76mm), 4 pcs 1/4” (6.35mm), 2
AF28-4259 42mm - 59mm ( 1.65” – 2.32” ) 1-1/4” , 1-1/2” , 1-3/4” pcs 5/16” (7.93mm) and 2 pcs 3/8” (9.52mm). Available in black and blue.
AF28-4865 48mm - 65mm ( 1.88” – 2.55” ) 1-3/4”, 2”
AF28-5875 58mm - 75mm ( 2.28” – 2.95” ) 2” , 2-1/4” , 2-1/2” Part No Colour Description
AF28-6885 68mm - 85mm ( 2.67” – 3.34” ) 2-1/2”, 2-3/4”
AF28-7895 78mm - 95mm ( 3.07” – 3.74” ) 2-3/4”, 3” , 3-1/4” AF9091-016-01 Blue 16 piece plug kit
AF28-1012 100mm - 120mm ( 3.93” – 4.72” ) 3-1/2” , 3-3/4”, 4” AF9291-016-01 Black 16 piece plug kit
AF28-1214 120mm - 140mm ( 4.72” – 5.51” ) 4-1/2” , 4-3/4”, 5”
AF28-1517 150mm - 170mm ( 5.90” – 6.69” ) 5-1/2” , 6”
aeroflowperformance.com 405
 SILICONE HOSE

LEG

STRAIGHT .98FT (300mm) HOSE

AEROFLOW Diameter (I.D.) Blue Black Wall
SILICONE HOSE Diameter I.D Wall
19mm 3/4” AF9001-075M AF9201-075M 4.5mm 11/64”
Aeroflow designs and manufactures 22mm 7/8” AF9001-085M AF9201-085M 4.5mm 11/64”
premium quality silicone hose for the 25.4mm 1” AF9001-100M AF9201-100M 4.5mm 11/64”
Performance Automotive Industry, 31.7mm 1-1/4” AF9001-125M AF9201-125M 4.5mm 11/64”
Transport Industry and Industrial applications. 38.1mm 1-1/2” AF9001-150M AF9201-150M 4.5mm 11/64”
Whether it’s silicone heater hose, vacuum or high 44.4mm 1-3/4” AF9001-175M AF9201-175M 4.5mm 11/64”
temperature silicone turbo hose, Aeroflow has the right 50.8mm 2” AF9001-200M AF9201-200M 5.3mm 13/64”
products for your demanding applications. 57mm 2-1/4” AF9001-225M AF9201-225M 5.3mm 13/64”
• Huge Range. 63.5mm 2-1/2” AF9001-250M AF9201-250M 5.3mm 13/64”
• 3 Ply hose have a wall thickness 4.5mm (3/16”)wall and 70mm 2-3/4” AF9001-275M AF9201-275M 5.3mm 13/64”
4 ply have a wall thickness of 5.3mm (7/32”). 76.2mm 3” AF9001-300M AF9201-300M 5.3mm 13/64”
• Working temperature -60 to +180 Celsius 82mm 3-1/4” AF9001-325M AF9201-325M 5.3mm 13/64”
(-75 to +350 Fahrenheit). 88.9mm 3-1/2” AF9001-350M AF9201-350M 5.3mm 13/64”
• Excellent ply adhesion from the inner core to the outer layers. 95mm 3-3/4” AF9001-375M AF9201-375M 5.3mm 13/64”
• Bright gloss finish. • Not recommended for use with oil and fuel. 101.6mm 4” AF9001-400M AF9201-400M 5.3mm 13/64”
• Weather resistance to: harsh sunlight, dry conditions and rain water. 127mm 5” AF9001-500M AF9201-500M 5.3mm 13/64”
• Great retail packaging for easy display and product protection. 153mm 6” AF9001-600M AF9201-600M 5.3mm 13/64”
Note: Leg sizes are approximate and may vary.
SILICONE HOSE

STRAIGHT 3.3FT (1M) HOSE

STRAIGHT 3” (76mm) HOSE Diameter (I.D.) Blue Black Wall
19mm 3/4” AF9001-075L AF9201-075L 4.5mm 11/64”
Diameter (I.D.) Blue Black Wall 22mm 7/8” AF9001-085L AF9201-085L 4.5mm 11/64”
25.4mm 1” AF9001-100L AF9201-100L 4.5mm 11/64”
19mm 3/4” AF9001-075 AF9201-075 4.5mm 11/64” 31.7mm 1-1/4” AF9001-125L AF9201-125L 4.5mm 11/64”
22mm 7/8” AF9001-085 AF9201-085 4.5mm 11/64” 38.1mm 1-1/2” AF9001-150L AF9201-150L 4.5mm 11/64”
25.4mm 1” AF9001-100 AF9201-100 4.5mm 11/64” 44.4mm 1-3/4” AF9001-175L AF9201-175L 4.5mm 11/64”
31.7mm 1-1/4” AF9001-125 AF9201-125 4.5mm 11/64” 50.8mm 2” AF9001-200L AF9201-200L 5.3mm 13/64”
38.1mm 1-1/2” AF9001-150 AF9201-150 4.5mm 11/64” 57mm 2-1/4” AF9001-225L AF9201-225L 5.3mm 13/64”
44.4mm 1-3/4” AF9001-175 AF9201-175 4.5mm 11/64” 63.5mm 2-1/2” AF9001-250L AF9201-250L 5.3mm 13/64”
50.8mm 2” AF9001-200 AF9201-200 5.3mm 13/64” 70mm 2-3/4” AF9001-275L AF9201-275L 5.3mm 13/64”
57mm 2-1/4” AF9001-225 AF9201-225 5.3mm 13/64” 76.2mm 3” AF9001-300L AF9201-300L 5.3mm 13/64”
63.5mm 2-1/2” AF9001-250 AF9201-250 5.3mm 13/64” 82mm 3-1/4” AF9001-325L AF9201-325L 5.3mm 13/64”
70mm 2-3/4” AF9001-275 AF9201-275 5.3mm 13/64” 88.9mm 3-1/2” AF9001-350L AF9201-350L 5.3mm 13/64”
76.2mm 3” AF9001-300 AF9201-300 5.3mm 13/64” 95mm 3-3/4” AF9001-375L AF9201-375L 5.3mm 13/64”
80mm 3-1/8” AF9001-312 AF9201-312 5.3mm 13/64” 101.6mm 4” AF9001-400L AF9201-400L 5.3mm 13/64”
82mm 3-1/4” AF9001-325 AF9201-325 5.3mm 13/64” 127mm 5” AF9001-500L AF9201-500L 5.3mm 13/64”
88.9mm 3-1/2” AF9001-350 AF9201-350 5.3mm 13/64” 153mm 6” AF9001-600L AF9201-600L 5.3mm 13/64”
95mm 3-3/4” AF9001-375 AF9201-375 5.3mm 13/64”
101.6mm 4” AF9001-400 AF9201-400 5.3mm 13/64”
127mm 5” AF9001-500 AF9201-500 5.3mm 13/64”
153mm 6” AF9001-600 AF9201-600 5.3mm 13/64”

406 aeroflowperformance.com
 SILICONE HOSE

23o SILICONE
HOSE ELBOWS
90o SILICONE HOSE ELBOWS
Diameter (I.D.) Blue Black Wall Leg
50.8mm 2” AF9007-200 AF9207-200 5.3mm 13/64” 125mm 4-59/64” Diameter (I.D.) Blue Black Wall Leg
57mm 2-1/4” AF9007-225 AF9207-225 5.3mm 13/64” 125mm 4-59/64”
63.5mm 2-1/2” AF9007-250 AF9207-250 5.3mm 13/64” 125mm 4-59/64” 13mm 1/2” AF9003-050 AF9203-050 4.5mm 11/64” 150mm 5-29/32”
70mm 2-3/4” AF9007-275 AF9207-275 5.3mm 13/64” 125mm 4-59/64” 16mm 5/8” AF9003-063 AF9203-063 4.5mm 11/64” 150mm 5-29/32”
76.2mm 3” AF9007-300 AF9207-300 5.3mm 13/64” 125mm 4-59/64” 19mm 3/4” AF9003-075 AF9203-075 4.5mm 11/64” 150mm 5-29/32”
79.3mm 3-1/8” AF9007-312 AF9207-312 5.3mm 13/64” 125mm 4-59/64” 22mm 7/8” AF9003-085 AF9203-085 4.5mm 11/64” 150mm 5-29/32”
82mm 3-1/4” AF9007-325 AF9207-325 5.3mm 13/64” 125mm 4-59/64” 25mm 1” AF9003-100 AF9203-100 4.5mm 11/64” 150mm 5-29/32”
88.9mm 3-1/2” AF9007-350 AF9207-350 5.3mm 13/64” 125mm 4-59/64” 32mm 1-1/4” AF9003-125 AF9203-125 4.5mm 11/64” 150mm 5-29/32”
95mm 3-3/4” AF9007-375 AF9207-375 5.3mm 13/64” 125mm 4-59/64” 38mm 1-1/2” AF9003-150 AF9203-150 4.5mm 11/64” 150mm 5-29/32”
101.6mm 4” AF9007-400 AF9207-400 5.3mm 13/64” 125mm 4-59/64” 45mm 1-3/4” AF9003-175 AF9203-175 4.5mm 11/64” 150mm 5-29/32”
50.8mm 2” AF9003-200 AF9203-200 5.3mm 13/64” 150mm 5-29/32”
57mm 2-1/4” AF9003-225 AF9203-225 5.3mm 13/64” 150mm 5-29/32”
63.5mm 2-1/2” AF9003-250 AF9203-250 5.3mm 13/64” 150mm 5-29/32”
70mm 2-3/4” AF9003-275 AF9203-275 5.3mm 13/64” 150mm 5-29/32”
76.2mm 3” AF9003-300 AF9203-300 5.3mm 13/64” 150mm 5-29/32”
79.3mm 3-1/8” AF9003-312 AF9203-312 5.3mm 13/64” 150mm 5-29/32”
82mm 3-1/4” AF9003-325 AF9203-325 5.3mm 13/64” 150mm 5-29/32”
88.9mm 3-1/2” AF9003-350 AF9203-350 5.3mm 13/64” 150mm 5-29/32”
101.6mm 4” AF9003-400 AF9203-400 5.3mm 13/64” 150mm 5-29/32”
107.5mm 4-1/4” AF9003-425 AF9203-425 5.3mm 13/64” 150mm 5-29/32”

45o SILICONE
127.5mm 5” AF9003-500 AF9203-500 5.3mm 13/64” 150mm 5-29/32”

HOSE ELBOWS

SILICONE HOSE
Diameter (I.D.) Blue Black Wall Leg
13mm 1/2” AF9002-050 AF9202-050 4.5mm 11/64”
Leg
145mm 5-45/64”
16mm 5/8” AF9002-063 AF9202-063 4.5mm 11/64” 145mm 5-45/64”
19mm 3/4” AF9002-075 AF9202-075 4.5mm 11/64” 145mm 5-45/64”
25mm 1” AF9002-100 AF9202-100 4.5mm 11/64” 145mm 5-45/64”
32mm 1-1/4” AF9002-125 AF9202-125 4.5mm 11/64” 145mm 5-45/64”
38mm 1-1/2” AF9002-150 AF9202-150 4.5mm 11/64” 145mm 5-45/64”
45mm 1-3/4” AF9002-175 AF9202-175 4.5mm 11/64” 145mm 5-45/64”
50.8mm
57mm
2”
2-1/4”
AF9002-200
AF9002-225
AF9202-200
AF9202-225
5.3mm
5.3mm
13/64”
13/64”
145mm 5-45/64”
145mm 5-45/64”
135o SILICONE HOSE ELBOWS
63.5mm 2-1/2” AF9002-250 AF9202-250 5.3mm 13/64” 145mm 5-45/64”
70mm 2-3/4” AF9002-275 AF9202-275 5.3mm 13/64” 145mm 5-45/64” Diameter (I.D.) Blue Black Wall Leg
76.2mm 3” AF9002-300 AF9202-300 5.3mm 13/64” 145mm 5-45/64”
79.3mm 3-1/8” AF9002-312 AF9202-312 5.3mm 13/64” 145mm 5-45/64” 25mm 1” AF9005-100 AF9205-100 4.5mm 11/64” 100mm 3-15/16”
82mm 3-1/4” AF9002-325 AF9202-325 5.3mm 13/64” 145mm 5-45/64” 38mm 1-1/2” AF9005-150 AF9205-150 4.5mm 11/64” 100mm 3-15/16”
88.9mm 3-1/2” AF9002-350 AF9202-350 5.3mm 13/64” 145mm 5-45/64” 51mm 2” AF9005-200 AF9205-200 5.3mm 13/64” 100mm 3-15/16”
101.6mm 4” AF9002-400 AF9202-400 5.3mm 13/64” 145mm 5-45/64” 63mm 2-1/2” AF9005-250 AF9205-250 5.3mm 13/64” 100mm 3-15/16”
107.5mm 4-1/4” AF9002-425 AF9202-425 5.3mm 13/64” 145mm 5-45/64” 75mm 3” AF9005-300 AF9205-300 5.3mm 13/64” 100mm 3-15/16”
127.5mm 5” AF9002-500 AF9202-500 5.3mm 13/64” 150mm 5-29/32” 102mm 4” AF9005-400 AF9205-400 5.3mm 13/64” 100mm 3-15/16”

67o SILICONE
HOSE ELBOWS
Diameter (I.D.) Blue Black Wall Leg 180o SILICONE HOSE ELBOWS
50.8mm 2” AF9008-200 AF9208-200 5.3mm 13/64” 125mm 4-59/64”
57mm 2-1/4” AF9008-225 AF9208-225 5.3mm 13/64” 125mm 4-59/64” Diameter (I.D.) Blue Black Wall Leg
63.5mm 2-1/2” AF9008-250 AF9208-250 5.3mm 13/64” 125mm 4-59/64”
25mm 1” AF9006-100 AF9206-100 4.5mm 11/64” 100mm 3-15/16”
70mm 2-3/4” AF9008-275 AF9208-275 5.3mm 13/64” 125mm 4-59/64”
38mm 1-1/2” AF9006-150 AF9206-150 4.5mm 11/64” 100mm 3-15/16”
76.2mm 3” AF9008-300 AF9208-300 5.3mm 13/64” 125mm 4-59/64”
51mm 2” AF9006-200 AF9206-200 5.3mm 13/64” 100mm 3-15/16”
79.3mm 3-1/8” AF9008-312 AF9208-312 5.3mm 13/64” 125mm 4-59/64”
63mm 2-1/2” AF9006-250 AF9206-250 5.3mm 13/64” 100mm 3-15/16”
82mm 3-1/4” AF9008-325 AF9208-325 5.3mm 13/64” 125mm 4-59/64”
70mm 2-3/4” AF9006-275 AF9206-275 5.3mm 13/64” 100mm 3-15/16”
88.9mm 3-1/2” AF9008-350 AF9208-350 5.3mm 13/64” 125mm 4-59/64”
75mm 3” AF9006-300 AF9206-300 5.3mm 13/64” 100mm 3-15/16”
95mm 3-3/4” AF9008-375 AF9208-375 5.3mm 13/64” 125mm 4-59/64”
101.6mm 4” AF9008-400 AF9208-400 5.3mm 13/64” 125mm 4-59/64”
aeroflowperformance.com 407
 SILICONE HOSE

STRAIGHT
SILICONE HOSE 45o SILICONE
REDUCERS / HOSE REDUCERS
EXPANDERS / EXPANDERS

Diameter (I.D.) Blue Black Length

16-13mm 45/64” - 1/2” AF9001-070-050 AF9201-070-050 127mm 5”

19-13mm 3/4” - 1/2” AF9001-075-050 AF9201-075-050 127mm 5”
19-16mm 3/4” - 45/64” AF9001-075-070 AF9201-075-070 127mm 5” Diameter (I.D.) Blue Black Leg
22-16mm 55/64” - 45/64” AF9001-085-070 AF9201-085-070 127mm 5”
22-19mm 55/64” - 3/4” AF9001-085-075 AF9201-085-075 127mm 5” 19-13mm 3/4” - 1/2” AF9002-075-050 AF9202-075-050 140mm 5-33/64”
25-16mm 1” - 45/64” AF9001-100-070 AF9201-100-070 127mm 5” 19-16mm 3/4” - 5/8” AF9002-075-070 AF9202-075-070 140mm 5-33/64”
25-19mm 1” - 3/4” AF9001-100-075 AF9201-100-075 127mm 5” 25-16mm 1” - 5/8” AF9002-100-070 AF9202-100-070 140mm 5-33/64”
28-22mm 1-1/8” - 55/64” AF9001-112-085 AF9201-112-085 127mm 5” 25-19mm 1” - 3/4” AF9002-100-075 AF9202-100-075 140mm 5-33/64”
28-25mm 1-1/8” - 1” AF9001-112-100 AF9201-112-100 127mm 5” 32-25mm 1-1/4” - 1” AF9002-125-100 AF9202-125-100 140mm 5-33/64”
32-25mm 1-1/4” - 1” AF9001-125-100 AF9201-125-100 127mm 5” 38-25mm 1-1/2” - 1” AF9002-150-100 AF9202-150-100 140mm 5-33/64”
32-28mm 1-1/4” - 1-1/8” AF9001-125-112 AF9201-125-112 127mm 5” 38-32mm 1-1/2” - 1-1/4” AF9002-150-125 AF9202-150-125 140mm 5-33/64”
35-25mm 1-3/8” - 1” AF9001-137-100 AF9201-137-100 127mm 5” 38-35mm 1-1/2” - 1-3/8” AF9002-150-137 AF9202-150-137 140mm 5-33/64”
35-28mm 1-3/8” - 1-1/8” AF9001-137-112 AF9201-137-112 127mm 5” 40-35mm 1-5/8” - 1-3/8” AF9002-162-137 AF9202-162-137 140mm 5-33/64”
35-32mm 1-3/8” - 1-1/4” AF9001-137-125 AF9201-137-125 127mm 5” 45-32mm 1-3/4” - 1-1/4” AF9002-175-125 AF9202-175-125 140mm 5-33/64”
38-22mm 1-1/2” - 55/64” AF9001-150-085 AF9201-150-085 127mm 5” 45-38mm 1-3/4” - 1-1/2” AF9002-175-150 AF9202-175-150 140mm 5-33/64”
38-25mm 1-1/2” - 1” AF9001-150-100 AF9201-150-100 127mm 5” 51-38mm 2” - 1-1/2” AF9002-200-150 AF9202-200-150 140mm 5-33/64”
38-28mm 1-1/2” - 1-1/8” AF9001-150-112 AF9201-150-112 127mm 5” 51-45mm 2” - 1-3/4” AF9002-200-175 AF9202-200-175 140mm 5-33/64”
38-32mm 1-1/2” - 1-1/4” AF9001-150-125 AF9201-150-125 127mm 5” 57-51mm 2-1/4” - 2” AF9002-225-200 AF9202-225-200 140mm 5-33/64”
38-35mm 1-1/2” - 1-3/8 ” AF9001-150-137 AF9201-150-137 127mm 5” 63-51mm 2-1/2” - 2” AF9002-250-200 AF9202-250-200 140mm 5-33/64”
40-35mm 1-5/8” - 1-3/8 ” AF9001-162-137 AF9201-162-137 127mm 5” 63-57mm 2-1/2” - 2-1/4” AF9002-250-225 AF9202-250-225 140mm 5-33/64”
45-32mm 1-3/4” - 1-1/4” AF9001-175-125 AF9201-175-125 127mm 5” 70-51mm 2-3/4” - 2” AF9002-275-200 AF9202-275-200 140mm 5-33/64”
45-38mm 1-3/4” - 1-1/2” AF9001-175-150 AF9201-175-150 127mm 5” 70-57mm 2-3/4” - 2-1/4” AF9002-275-225 AF9202-275-225 140mm 5-33/64”
51-38mm 2” - 1-1/2” AF9001-200-150 AF9201-200-150 127mm 5” 70-63mm 2-3/4” - 2-1/2” AF9002-275-250 AF9202-275-250 140mm 5-33/64”
51-45mm 2” - 1-3/4” AF9001-200-175 AF9201-200-175 127mm 5” 75-51mm 3” - 2” AF9002-300-200 AF9202-300-200 140mm 5-33/64”
54-51mm 2-1/8” - 2” AF9001-212-200 AF9201-212-200 127mm 5” 75-57mm 3” - 2-1/4” AF9002-300-225 AF9202-300-225 140mm 5-33/64”
57-51mm 2-1/4” - 2” AF9001-225-200 AF9201-225-200 127mm 5” 75-63mm 3” - 2-1/2” AF9002-300-250 AF9202-300-250 140mm 5-33/64”
63-51mm 2-1/2” - 2” AF9001-250-200 AF9201-250-200 127mm 5” 75-70mm 3” - 2-3/4” AF9002-300-275 AF9202-300-275 140mm 5-33/64”
SILICONE HOSE

63-57mm 2-1/2” - 2-1/4” AF9001-250-225 AF9201-250-225 127mm 5” 83-63mm 3-1/4” - 2-1/2” AF9002-325-250 AF9202-325-250 140mm 5-33/64”
70-51mm 2-3/4” - 2” AF9001-275-200 AF9201-275-200 127mm 5” 83-70mm 3-1/4” - 2-3/4” AF9002-325-275 AF9202-325-275 140mm 5-33/64”
70-57mm 2-3/4” - 2-1/4” AF9001-275-225 AF9201-275-225 127mm 5” 83-76mm 3-1/4” - 3” AF9002-325-300 AF9202-325-300 140mm 5-33/64”
70-60mm 2-3/4” - 2-3/8” AF9001-275-237 AF9201-275-237 127mm 5” 90-76mm 3-1/2” - 3” AF9002-350-300 AF9202-350-300 140mm 5-33/64”
70-63mm 2-3/4” - 2-1/2” AF9001-275-250 AF9201-275-250 127mm 5” 90-83mm 3-1/2” - 3-1/4” AF9002-350-325 AF9202-350-325 140mm 5-33/64”
76-51mm 3” - 2” AF9001-300-200 AF9201-300-200 127mm 5” 95-75mm 3-3/4” - 3” AF9002-375-300 AF9202-375-300 140mm 5-33/64”
76-57mm 3” - 2-1/4” AF9001-300-225 AF9201-300-225 127mm 5” 102-75mm 4” - 3” AF9002-400-300 AF9202-400-300 140mm 5-33/64”
76-63mm 3” - 2-1/2” AF9001-300-250 AF9201-300-250 127mm 5” 102-83mm 4” - 3-1/4” AF9002-400-325 AF9202-400-325 140mm 5-33/64”
76-67mm 3” - 2-5/8” AF9001-300-263 AF9201-300-263 127mm 5” 102-90mm 4” - 3-1/2” AF9002-400-350 AF9202-400-350 140mm 5-33/64”
76-70mm 3” - 2-3/4” AF9001-300-275 AF9201-300-275 127mm 5” 127-102mm 5” - 4” AF9002-500-400 AF9202-500-400 140mm 5-33/64”
83-63mm 3-1/4” - 2-1/2” AF9001-325-250 AF9201-325-250 127mm 5”
83-70mm 3-1/4” - 2-3/4” AF9001-325-275 AF9201-325-275 127mm 5”
83-76mm 3-1/4” - 3” AF9001-325-300 AF9201-325-300 127mm 5”
90-70mm 3-1/2” - 2-3/4” AF9001-350-275 AF9201-350-275 127mm 5”
90-76mm 3-1/2” - 3” AF9001-350-300 AF9201-350-300 127mm 5”
90-83mm 3-1/2” - 3-1/4” AF9001-350-325 AF9201-350-325 127mm 5”
95-76mm 3-3/4” - 3” AF9001-375-300 AF9201-375-300 127mm 5”
102-76mm 4” - 3” AF9001-400-300 AF9201-400-300 127mm 5”
102-83mm 4” - 3-1/4” AF9001-400-325 AF9201-400-325 127mm 5”
102-89mm 4” - 3-1/2” AF9001-400-350 AF9201-400-350 127mm 5”
127-102mm 5” - 4” AF9001-500-400 AF9201-500-400 127mm 5”
159-102mm 6-1/4” - 4” AF9001-625-400 AF9201-625-400 127mm 5”

SILICONE TEE HOSE

All tees are 4” (100mm) in length

HUMP SILICONE HOSE RUN / SIDE (I.D.) Blue Black Side Leg
38-25mm 1-1/2” - 1” AF9044-150-100 AF9244-150-100 50mm 2”
Diameter (I.D.) Blue Black Wall Length 45-25mm 1-3/4” - 1” AF9044-175-100 AF9244-175-100 50mm 2”
51-25mm 2” - 1” AF9044-200-100 AF9244-200-100 50mm 2”
38mm 1-1/2” AF9011-150 AF9211-150 4.5mm 11/64” 100mm 3-15/16” 51-35mm 2” - 1-3/8” AF9044-200-137 AF9244-200-137 50mm 2”
51mm 2” AF9011-200 AF9211-200 5.3mm 13/64” 100mm 3-15/16” 57-35mm 2-1/4” - 1-3/8” AF9044-225-137 AF9244-225-137 50mm 2”
57mm 2-1/4” AF9011-225 AF9211-225 5.3mm 13/64” 100mm 3-15/16” 63-25mm 2-1/2” - 1” AF9044-250-100 AF9244-250-100 50mm 2”
63mm 2-1/2” AF9011-250 AF9211-250 5.3mm 13/64” 100mm 3-15/16” 63-35mm 2-1/2” - 1-3/8” AF9044-250-137 AF9244-250-137 50mm 2”
70mm 2-3/4” AF9011-275 AF9211-275 5.3mm 13/64” 100mm 3-15/16” 70-25mm 2-3/4” - 1” AF9044-275-100 AF9244-275-100 50mm 2”
75mm 3” AF9011-300 AF9211-300 5.3mm 13/64” 100mm 3-15/16” 76-25mm 3” - 1” AF9044-300-100 AF9244-300-100 50mm 2”
82mm 3-1/4” AF9011-325 AF9211-325 5.3mm 13/64” 100mm 3-15/16” 70-35mm 2-3/4” - 1-3/8” AF9044-275-137 AF9244-275-137 50mm 2”
88mm 3-1/2” AF9011-350 AF9211-350 5.3mm 13/64” 100mm 3-15/16” 76-35mm 3” - 1-3/8” AF9044-300-137 AF9244-300-137 50mm 2”
102mm 4” AF9011-400 AF9211-400 5.3mm 13/64” 100mm 3-15/16”
408 aeroflowperformance.com
 SILICONE HOSE

VACUUM SILICONE HOSE 5 FT (1.5M) ROLL

90o SILICONE HOSE REDUCERS / EXPANDERS Diameter (I.D.) Blue Black Wall
3mm 1/8” AF9031-012-5 AF9231-012-5 2.5mm 3/32”
4mm 5/32” AF9031-016-5 AF9231-016-5 2.5mm 3/32”
Diameter (I.D.) Blue Black Leg 5mm 3/16” AF9031-018-5 AF9231-018-5 2.5mm 3/32”
6mm 1/4” AF9031-025-5 AF9231-025-5 3mm 7/64”
19-13mm 3/4” - 1/2” AF9003-075-050 AF9203-075-050 125mm 5” 8mm 5/16” AF9031-031-5 AF9231-031-5 3mm 7/64”
19-16mm 3/4” - 5/8” AF9003-075-070 AF9203-075-070 125mm 5” 10mm 3/8” AF9031-038-5 AF9231-038-5 3.2mm 1/8”
25-16mm 1” - 5/8” AF9003-100-070 AF9203-100-070 125mm 5”
25-19mm 1” - 3/4” AF9003-100-075 AF9203-100-075 125mm 5”
32-25mm 1-1/4” - 1” AF9003-125-100 AF9203-125-100 125mm 5”
38-25mm 1-1/2” - 1” AF9003-150-100 AF9203-150-100 125mm 5”
38-32mm 1-1/2” - 1-1/4” AF9003-150-125 AF9203-150-125 125mm 5”
38-35mm 1-1/2” - 1-3/8” AF9003-150-137 AF9203-150-137 125mm 5”
40-35mm 1-5/8” - 1-3/8” AF9003-162-137 AF9203-162-137 125mm 5”
45-32mm 1-3/4” - 1-1/4” AF9003-175-125 AF9203-175-125 125mm 5”
45-38mm 1-3/4” - 1-1/2” AF9003-175-150 AF9203-175-150 125mm 5”
51-38mm 2” - 1-1/2” AF9003-200-150 AF9203-200-150 125mm 5”
51-45mm 2” - 1-3/4” AF9003-200-175 AF9203-200-175 125mm 5”
57-51mm 2-1/4” - 2” AF9003-225-200 AF9203-225-200 125mm 5”
63-51mm 2-1/2” - 2” AF9003-250-200 AF9203-250-200 125mm 5”
63-57mm 2-1/2” - 2-1/4” AF9003-250-225 AF9203-250-225 125mm 5”
70-51mm 2-3/4” - 2” AF9003-275-200 AF9203-275-200 125mm 5”
70-57mm 2-3/4” - 2-1/4” AF9003-275-225 AF9203-275-225 125mm 5”

SILICONE HOSE
70-63mm 2-3/4” - 2-1/2” AF9003-275-250 AF9203-275-250 125mm 5”
75-51mm 3” - 2” AF9003-300-200 AF9203-300-200 125mm 5”
75-57mm 3” - 2-1/4” AF9003-300-225 AF9203-300-225 125mm 5”
75-63mm 3” - 2-1/2” AF9003-300-250 AF9203-300-250 125mm 5”
75-70mm 3” - 2-3/4” AF9003-300-275 AF9203-300-275 125mm 5”
83-63mm 3-1/4” - 2-1/2” AF9003-325-250 AF9203-325-250 125mm 5” VACUUM SILICONE HOSE 25 FT (7.6M) ROLL
83-70mm 3-1/4” - 2-3/4” AF9003-325-275 AF9203-325-275 125mm 5”
83-76mm 3-1/4” - 3” AF9003-325-300 AF9203-325-300 125mm 5”
90-76mm 3-1/2” - 3” AF9003-350-300 AF9203-350-300 125mm 5” Diameter (I.D.) Blue Black Wall
90-83mm 3-1/2” - 3-1/4” AF9003-350-325 AF9203-350-325 125mm 5” 3mm 1/8” AF9031-012-25 AF9231-012-25 2.5mm 3/32”
95-75mm 3-3/4” - 3” AF9003-375-300 AF9203-375-300 125mm 5” 4mm 5/32” AF9031-016-25 AF9231-016-25 2.5mm 3/32”
102-75mm 4” - 3” AF9003-400-300 AF9203-400-300 125mm 5” 5mm 3/16” AF9031-018-25 AF9231-018-25 2.5mm 3/32”
102-83mm 4” - 3-1/4” AF9003-400-325 AF9203-400-325 125mm 5” 6mm 1/4” AF9031-025-25 AF9231-025-25 3mm 7/64”
102-90mm 4” - 3-1/2” AF9003-400-350 AF9203-400-350 125mm 5” 8mm 5/16” AF9031-031-25 AF9231-031-25 3mm 7/64”
127-102mm 5” - 4” AF9003-500-400 AF9203-500-400 125mm 5” 10mm 3/8” AF9031-038-25 AF9231-038-25 3.2mm 1/8”

ALUMINIUM T-PIECES VACUUM SILICONE HOSE 50 FT (15M) ROLL

Diameter (O.D.) Blue Black Silver Diameter (I.D.) Blue Black Wall
3.2mm 1/8” AF64-4200 AF64-4200BLK AF64-4200S
3mm 1/8” AF9031-012-50 AF9231-012-50 2.5mm 3/32”
4mm 5/32” AF64-4201 AF64-4201BLK AF64-4201S
4mm 5/32” AF9031-016-50 AF9231-016-50 2.5mm 3/32”
5mm 3/16” AF64-4202 AF64-4202BLK AF64-4202S
5mm 3/16” AF9031-018-50 AF9231-018-50 2.5mm 3/32”
6.35mm 1/4” AF64-4203 AF64-4203BLK AF64-4203S
6mm 1/4” AF9031-025-50 AF9231-025-50 3mm 7/64”
8mm 5/16” AF64-4204 AF64-4204BLK AF64-4204S
8mm 5/16” AF9031-031-50 AF9231-031-50 3mm 7/64”
9.5mm 3/8” AF64-4205 AF64-4205BLK AF64-4205S
10mm 3/8” AF9031-038-50 AF9231-038-50 3.2mm 1/8”
12.7mm 1/2” AF64-4206 AF64-4206BLK AF64-4206S
15.8mm 5/8” AF64-4207 AF64-4207BLK AF64-4207S

aeroflowperformance.com 409
 SILICONE HOSE

REINFORCED HEATER SILICONE HOSE

5 FT (1.5M) LENGTH
The Aeroflow Performance silicone heater hose is now stronger and more
flexible than ever before. Thanks to the wire helix reinforcement to prevent
HEATER SILICONE HOSE collapse in tight bends or in vacuum applications. This construction provides
superior flexibility for easy routing for installation in multiple applications.
5 FT (1.5M) LENGTH
3 ply Nomex inner liner.
Diameter (I.D.) Part No Wall
Diameter (I.D.) Blue Black Wall
10mm 3/8” AF9255-038-5 5mm 13/64”
10mm 3/8” AF9051-038-5 AF9251-038-5 5mm 13/64” 13mm 1/2” AF9255-050-5 5mm 13/64”
13mm 1/2” AF9051-050-5 AF9251-050-5 5mm 13/64” 16mm 5/8” AF9255-062-5 5mm 13/64”
16mm 5/8” AF9051-062-5 AF9251-062-5 5mm 13/64” 19mm 3/4” AF9255-075-5 5mm 13/64”
19mm 3/4” AF9051-075-5 AF9251-075-5 5mm 13/64” 25mm 1” AF9255-100-5 5mm 13/64”
25mm 1” AF9051-100-5 AF9251-100-5 5mm 13/64”
32mm 1-1/4” AF9051-125-5 AF9251-125-5 5mm 13/64”
38mm 1-1/2” AF9051-150-5 AF9251-150-5 5mm 13/64”
SILICONE HOSE

44mm 1-3/4” AF9051-175-5 AF9251-175-5 5mm 13/64”

REINFORCED HEATER SILICONE HOSE
13 FT (4M) LENGTH
Diameter (I.D.) Part No Wall
10mm 3/8” AF9255-038-13 5mm 13/64”
13mm 1/2” AF9255-050-13 5mm 13/64”
16mm 5/8” AF9255-062-13 5mm 13/64”
19mm 3/4” AF9255-075-13 5mm 13/64”
25mm 1” AF9255-100-13 5mm 13/64”

HEATER SILICONE HOSE

13 FT (4M) LENGTH
3 ply Nomex inner liner.

Diameter (I.D.) Blue Black Wall

10mm 3/8” AF9051-038-13 AF9251-038-13 5mm 13/64”
13mm 1/2” AF9051-050-13 AF9251-050-13 5mm 13/64”
16mm 5/8” AF9051-062-13 AF9251-062-13 5mm 13/64”
19mm 3/4” AF9051-075-13 AF9251-075-13 5mm 13/64”
25mm 1” AF9051-100-13 AF9251-100-13 5mm 13/64”
32mm 1-1/4” AF9051-125-13 AF9251-125-13 5mm 13/64”
38mm 1-1/2” AF9051-150-13 AF9251-150-13 5mm 13/64”
44mm 1-3/4” AF9051-175-13 AF9251-175-13 5mm 13/64”

410 aeroflowperformance.com
 TOOLS

AF98-2041

AF98-2001

AN ADJUSTABLE GRIP WRENCH

This lightweight billet aluminium adjustable wrench with ergonomic grip,
does the job in confined space and is a must for any tool kit. Close tolerance
AF98-2002 machining gives a precise finish that is not normally found on standard
wrenches.

Part No Colour
AF98-2003 BLUE
AF98-2003BLK BLACK
AF98-2003S SILVER

Note: - Adjustable from sizes -3AN to -12AN

VICE JAWS
These vice jaws will securely hold the AN fittings without a hint of scratch-

SILICONE HOSE
ing the anodizing while you assemble the fitting. The back of the jaws have
magnets which holds the jaw firmly in place. They come in two styles - billet
hard anodised aluminium and nylon.

Part No Description
AF98-2001 Billet anodised Aluminium Vice Jaws Magnetic Back
AF98-2041 Billet anodised Aluminium Vice Jaws Magnetic Back
Recommended for large AN fittings
AF98-2002 Nylon Soft Vice Jaws Magnetic Back

WHEELIE BAR AND GENERAL

PURPOSE SPANNER
These 180mm (7”) long handle spanners are precisely marked and are used
for checking and making last minute adjustments to wheelie bars. No need to
AN ADJUSTABLE GRIP WRENCH carry a spanner and tape measure. One side has imperial sizes and the other
side features metric sizing. These spanners are also handy as a general
Stubby Wrench kit comes with two wrenches, the small wrench features a purpose tool for quick start line adjustments including tightening any AN fit-
89mm (3-1/2”) handle and will fit sizes from -3AN up to -10AN and the larger tings up to -12.
stubby features a 114.3mm (4-1/2”) long handle and fits sizes from -3AN up
to -20AN. Pack includes 1 x short & 1x long wrench.
Part No Colour
Part No Colour AF98-2038 BLUE
AF98-2038BLK BLACK
AF98-2039 BLUE AF98-2038S SILVER
AF98-2039BLK BLACK
AF98-2039S SILVER

aeroflowperformance.com 411
 TOOLS

Note: NOT SUITABLE for

Krytalon® socket nuts
S NUT
B NUT
use adjustable wrenches
see page 284

B = B nut sizes
S = Socket nut sizes
AN fitting alloy wrench
DOUBLE ENDED (B&S) WRENCH SET set sold as a set or as
individual pieces.
AN fitting double ended wrenches provide a perfect fit so they won’t mark
your fittings. All of our aluminium wrenches are hard anodized black and size
stamped. Fits both B-nuts and sockets. Perfect for hose end assembly.
B NUT WRENCH SET
AN fitting wrenches provide a perfect fit so they won’t mark your fittings. All
Part No Description of our aluminium wrenches are hard anodized black and size stamped.
These wrenches are used to remove and install assembled fittings and lines.
AF98-2004 Alloy AN Double Ended Wrench Set 7pc
Part No Description
Notes: - Includes 7 sizes from -3AN to -20AN
Note: Double ended -20 B-nut & S-nut Spanner only available separately. AF98-2005 Alloy AN Wrench Set 7pc

Note: - set Includes 7 sizes from -3AN to -16AN

Note: Single ended -20 B-nut Spanner only available separately.
TOOLS & SHOP EQUIPMENT

Note: NOT
SUITABLE for
Krytalon® socket AN B NUT WRENCH (SINGLE)
nuts
Part No B-nut
AN DOUBLE ENDED WRENCH (B&S) (SINGLE) AF98-2005-1-03 -3
AF98-2005-1-04 -4
Part No S-nut - B-nut AF98-2005-1-06 -6
AF98-2005-1-08 -8
AF98-2004-1-4-3 -3 and -4
AF98-2005-1-10 -10
AF98-2004-1-6-4 -4 and -6
AF98-2005-1-12 -12
AF98-2004-1-8-6 -6 and -8
AF98-2005-1-16 -16
AF98-2004-1-10-8 -8 and -10
AF98-2005-1-20 -20
AF98-2004-1-1210 -10 and -12
AF98-2004-1-1612 -12 and -16
AF98-2004-1-2016 -16 and -20
AF98-2004-1-2020 -20 and -20

AERO CLAMPS
Aero clamps are recommended for extra clamping on push lock hose used in
high pressure and heat applications. 5 different sizes available. AERO CLAMP PLIERS
Aero clamps are recommended for extra clamping on push lock hose used
in high pressure and heat applications. This tool aids in the installation and
Part No Description removal of all sized Aero clamps.
AF444-04 Suits -4 & -5 push lock hose
AF444-06 Suits -6 push lock hose Part No Description
AF444-08 Suits -8 push lock hose AF98-2024 Fits and removes all Aero clamps
AF444-10 Suits -10- push lock hose
AF444-12 Suits -12 push lock hose
These part numbers are available in packs of 50 clamps.
Add -50 to end of part number eg. AF444-06-50

412 aeroflowperformance.com
 TOOLS

Jets not included

COIL OVER SHOCK ADJUSTMENT TOOL

This tool helps you adjust the adjustment rings on your coil over shocks easily
and without damage. Tool is universal and suits most brands of coil overs with
adjusting nuts up to 82.5mm (3-1/4”) diameter.
BILLET JET STORAGE PLATE
Part No Description Holds 22 pairs of jets for your Holley carb tuning needs.
AF98-2010 Coil over shock adjustment tool
Part No Description
AF98-2011 Holds 44 Holley jets (1/4-32 UNF)

BILLET DZUS FASTENER TOOL MAGNETIC DECK BRIDGE

Multi-function Dzus tool. Dual head for both size fasteners.

TOOLS & SHOP EQUIPMENT

Part No Description
Part No Description AF98-2040 This bridge will fit over bores up to 114.3mm (4-1/2”).
AF98-2012 Billet black aluminium construction This is used to check piston-to-deck clearance, and it is
magnetic so it holds firmly into place. NOT supplied with dial
indicator.

BILLET OIL PUMP PRIMER TOOL

The first seconds an engine starts prior to building oil pressure is when
damage can easily occur. Aeroflow’s Oil Pump Primer lets you spin the
oil pump with a 9.52mm (3/8”) drill and bring oil pressure prior to firing the
engine. Aeroflow’s Oil Pump Primer offers a fantastic design. It includes a
special billet aluminium sleeve that precisely positions the shaft and keeps it
from wobbling.

Part No Description
AF98-2046 Oil Pump Primer for Chevrolet SBC, BBC and V6 90
degree engines

THREAD IDENTIFICATION KITS

Aeroflow Metric and Imperial thread identification kits that are very handy for
matching up fittings in the workshop or garage and feature a male and female
thread so you can ensure ordering the correct fittings for your plumbing
requirements. Metric kit includes male and female M9x1.0, M10x1.0,
M10x1.25, M10x1.5, M10x1.75, M12x1.0, M12x1.25, M12x1.5, M12x1.75,
M14x1.5. Imperial kit includes male and female, 5/16”-18, 5/16”-24, 3/8”-20, TOP DEAD CENTRE TOOL
3/8”-24 7/16”-20, 7/16”-24, 1/2”-20, 9/16”-18, 9/16”-20, 5/8”-18.
This top dead centre tool provides a positive stop for the piston when locating
Part No Description top dead centre. It screws into the spark plug hole and has a smooth radiused
ball end to prevent piston damage. 14mm spark plug thread
AF98-2055 Metric thread identification kit
AF98-2056 Imperial thread identification kit
Part No Description
AF98-2036 Aeroflow top dead centre locator

aeroflowperformance.com 413
 TOOLS

AF98-2110

PUSHROD LENGTH CHECKING KIT

Aeroflow’s Push Rod Length Checking tool makes it easy and cost-effective
to lay out and establish the proper pushrod length during an engine rebuild.
Correct pushrod length is critical in achieving proper valve train geometry.
They are made from a 5/16” (8mm) pushrod that is cut and threaded with
over 1” (25.4mm) travel. The kit contains 5 individual length checkers and
diameter checker.

Part No Description
AF98-2112
AF98-2050 Push Rod Length Checking Kit AF98-2111
Kit includes all sizes. Also available individually.
AF98-2050-1 From 6.125” (155mm) to 7.500” (190mm) GM LS ALIGNMENT TOOLS
AF98-2050-2 From 7.500” (190mm) to 8.700” (220mm)
AF98-2050-3 From 8.500” (215mm) to 9.800” (248mm) The timing cover and rear cover on GM LS series engines don’t have any
AF98-2050-4 From 9.700” (246mm) to 11.00” (279mm) dowel pins to ensure correct alignment to the centre line of the crankshaft.
AF98-2050-5 From 10.20” (259mm) to 11.50” (292mm) This can lead to annoying leaks at the front seal and rear main seal or may
even cause the front or rear cover to crack. These special alignment tools
from Aeroflow Performance will allow you to centre the front or rear cover
when it is installed. It also provides an easy way to install the seal by lightly
tapping on the tool with rubber mallet with its plastic construction so it doesn’t
damage your engine or seal.

Part No Description
TOOLS & SHOP EQUIPMENT

AF98-2110 Installation tool for GM LS rear cover

AF98-2111 Alignment tool for GM LS timing cover NO seal installed
AF98-2112 Alignment tool for GM LS timing cover WITH seal installed

AF98-2108

AF59-2099

GM LS SERIES HARMONIC
MANUAL PISTON RING FILER BALANCER INSTALLATION TOOL
This Aeroflow Performance harmonic balancer installation tool is designed for
To assure proper piston ring end-gap, the Aeroflow Performance manual
use with GM LS crankshafts. Made from high quality steel material. This tool
piston ring filer enables the operator to file piston rings quickly and accurately.
makes installing the harmonic balancer simple and easy on your LS series
Position the piston ring firmly against the dowel pins, crank the handle to
engines. Just thread the correct end into the crankshaft and rotate the nut
turn the abrasive wheel. Using a feeler gauge, file the piston ring to meet the
pressing the bearing against the harmonic balancer.
manufacturer’s specification. It features a 120 grit grinding wheel which can
be purchased separately ( AF59-2099 ). This piston ring filer can be bench or
vice mounted whichever is suited for the operator. Part No Description

Part No Description AF98-2107 GM LS series harmonic balancer installation tool

AF98-2108 Manual piston ring filer

AF59-2099 Replacement piston ring filer grinding disc

GM LS SERIES LIFTER RETAINING TOOLS

Part No Description
AF98-2078 This handy tool set helps prevent the lifters from falling
through the bores and into the engine when changing the
cam shaft.

414 aeroflowperformance.com
 TOOLS

EFI DISCONNECT TOOL

NON-STICK CUTTING FILM This handy tool allows you to disconnect your factory EFI fitting without
damaging the plastic clips. They will work for both 5/16” and 3/8” fuel line
Aeroflow’s non-stick cutting film is an easy and cost effective way for a neat fittings.
cut every time of Kevlar or Nylon braided hose. No more struggling with slid-
ing the socket nut over the frayed cloth braid, simply slide the nut over before Part No Description
removing the tape. This handy kit comes with 50m (164 ft 1/2”) of clear non-
stick cutting film and 2m (6 ft 6-3/4”) of white PE film that can also be used on AF98-2106 EFI disconnect tool
stainless braided hose.

Part No Description
AF98-2049 Non-stick cutting film

AF98-2070

TOOLS & SHOP EQUIPMENT

AF98-2071 AF98-2072

AEROFLOW THREAD PASTE

Aeroflow’s Aero Seal thread sealing paste contains PTFE to assist in seal- LEAD CRIMP TOOL
ing and avoid binding of threads. Recommended for use with all threaded
fasteners and adapters in aluminium, steel, stainless steel and plastic. Aero The Aeroflow ignition lead crimp tool is pefect for helping
Seal is an anaerobic paste that remains liquefied until installation to provide a you make professional quality crimps when assembling
positive seal and can be used in temperature ranges from -58° to 400°F / -50° your ignition leads.Standard jaws suit 8.5mm (11/32”) leads.
to 204°C. Sold individually or in 12 piece bulk packs. Optional jaws are avaliable to suit insulated and non insulated
electrical terminals for auto electrical applications.

Part No Description Part No Description

AF98-2023 Aeroflow thread paste 50ml (1.69oz) squeeze tube
AF98-2070 Crimp tool with 8.5mm (11/32”) lead jaws
AF98-2023-12 Bulk 12 pack of Aeroflow thread paste 50ml tubes
AF59-2070 Replacement dies for lead crimp tool

OPTIONAL ELECTRICAL TERMINAL CRIMP JAWS

AF98-2071 Crimp jaws suit insulated electrical terminals
AF98-2072 Crimp jaws suit NON-insulated electrical terminals

FLUSH CUTTERS
ELECTRICAL WIRE STRIPPERS This flush cutter tool is great for cutting wires or cable ties leaving a clean and
Aeroflow’s automatic electrical wire strippers allow you to strip wires from smooth finish. It’s also perfect for cutting close to the solder joints on circuit
1.0mm to 3.2mm gauge smoothly with ease. It features sturdy die cast alloy boards and other delicate and intricate cutting jobs. These compact cutters
body with polyvinyl grips The spring sets the stripper back to the starting are lightweight and feature easy grip rubber handles.
position and the length stop can be set for constant stripping length during
repetitive work. This tool leaves wires undamaged thanks to precision-ground
blade shapes.
Part No Description
Part No Description AF98-2104 Flush cutters

AF98-2105 Electrical wire strippers

aeroflowperformance.com 415
 TOOLS

PRESSURE TEST TAGS PLASTIC DUST CAPS & PLUG KIT

Plastic zip style tags for taging tested lines with date and pressure.
This 96 piece of assorted sizes -3AN to -20AN caps and plugs fit 37 degree
flared fittings and straight threaded ports. A must for keeping debris out of
Part No Description lines and hoses. Ideal for keeping internal components of fuel pumps, pres-
sure regulators and dry sump sumps etc, clean during storage.
AF98-2060 Pack of 10 Tags
AF98-2061 Pack of 50 Tags
AF98-2062 Pack of 100 Tags Part No Description
FULL KIT
AF98-2025 96 piece assorted sizes -3AN to -20AN

AVAILABLE IN 10 PACKS
Female Caps
AF98-2088 -3AN female cap
AF98-2089 -4AN female cap
AF98-2090 -6AN female cap
AF98-2091 -8AN female cap
AF98-2092 -10AN female cap
AF98-2093 -12AN female cap
AF98-2094 -16AN female cap
AF98-2095 -20AN female cap
Male Pugs
TOOLS & SHOP EQUIPMENT

AF98-2096 -3AN male plug

AF98-2097 -4AN male plug
AF98-2098 -6AN male plug
AF98-2099 -8AN male plug
E85 CONTENT TESTER AF98-2100 -10AN male plug
AF98-2101 -12AN male plug
This simple instrument will allow you to determine the Ethanol content of the AF98-2102 -16AN male plug
fuel you are sampling. Knowing the content of the fuel you are using allows AF98-2103 -20AN male plug
you to make more informed decisions when it comes to the tune up of your
car. Consistent fuel leads to consistent performance.

Part No Description
AF66-2500 E85 content tester
AF98-2082
AF98-2080

AF98-2085
AF98-2087

PRESSURE TEST KITS

These pressure test kits from Aeroflow Performance is just what you need
to ensure the job is done right before installing it onto your application. After
building you’re AN fitting line terminated with our stainless steel adaptor and
test valve on the other end. Install the plug on one end of the line then use an
air compressor to pressurize the line to the desired test pressure. The valve
is a standard Schrader valve which allows a tyre pressure gauge to be used.
Unlike some other, more costly and complex solutions for testing braided
lines, these pressure testers are small and versatile and allow the user to test
all lines both on and off the vehicle. Available in all AN sizes from -3AN all the
way to -20AN.

Part No Description
AF98-2080 -3AN pressure test kit
AF98-2081 -4AN pressure test kit
AF98-2082 -6AN pressure test kit
AF98-2083 -8AN pressure test kit
AF98-2084 -10AN pressure test kit
AF98-2085 -12AN pressure test kit
AF98-2086 -16AN pressure test kit
AF98-2087 -20AN pressure test kit
416 aeroflowperformance.com
 TOOLS

DEBURRING TOOL
The Aeroflow Performance swivel deburring tool provides easy deburring of
metals or plastic. The blade is made from high quality high-speed steel with
200 SERIES HOSE CUTTER (Tungsten) Carbide Tipped ( HSS ). Providing a very clean cut with extreme
This ultra-sharp hand held cutter has been designed to use on our 200 series wear resistant for durability. The blades are easily replaceable and one spare
hose. These cutters will not leave residue as other methods of cutting does. blade is included.

Part No Description Part No Description

AF98-2016 Cuts -3 and -4 200 series teflon hose AF98-2116 Deburring tool

KEVLAR, TEFLON CONVOLUTED TEFLON

AND 400 & 500 SERIES HOSE CUTTER TUBE BENDER
No more wasting time and hose with nasty unclean cuts, simply line up hose The Aeroflow Performance 5 in 1 pipe bender hand tool is designed for creat-
at 90 degrees to get a clean cut every time. Can be used with Aeroflow’s ing ripple-free and clean bends in pipes with precision in a range of materials
Kyrptalon® and 400 & 500 series hose up to -12 AN. such as copper, steel and aluminium. This 180 degree bender tool is capable

TOOLS & SHOP EQUIPMENT

The advantage of our cutter is the blade is dual functioning, simply rotate the of bending 1/4”, 5/16”, 3/8”, 1/2” and 5/8” tubes with ease. It features a cali-
blade when blunt. Cutter also supplied with spare blade. bration scale for easy accurate bending of right and left bends providing you
with a reliable guide to work with.

Part No Description
Part No Description
AF98-2052 Kevlar, Nylon, 400 & 500 Series Hose Cutter
AF98-2053 Hand held cutter replacement 5 pack of blades that AF98-2117 Tube bender, 1/4”, 5/16”, 3/8”, 1/2” and 5/8” tubes
works out to be 10 when you include the rotation.

HOSE CUTTING SHEARS

Great for cutting all styles of Aeroflow hose including braided and rubber.
Excluding Kryptalon®

Part No Description
AF98-2015 Cuts -3 up to -16 Hose AF98-2121
AF98-2120

CAM DEGREE WHEEL

The Aeroflow Performance degree wheels are a mandatory tool for the
professional engine builder to keep in the workshop. It accurately measures
several timing functions of an engine such as valve timing, top dead centre,
PTFE (Teflon®) OLIVE INSTALLATION TOOL bottom dead centre etc. Made from heavy gauge metal with a silk screen fin-
ish for long-lasting use in shop or track environments. Available in the smaller
Assists in separating teflon inner liner from braided outer. Assists in installing
9” diameter or the larger 18” diameter.
olive onto PTFE Hose. Tool suits 200 & 250 series hose.
Part No Description
Part No Description
AF98-2120 228.6mm (9”) diameter degree wheel
AF98-2043 Suits -3, -4, -6 and -8 PTFE Hose AF98-2121 457.2mm (18”) diameter degree wheel

aeroflowperformance.com 417
 TOOLS

HARDLINE PIPE CUTTER

Cut plastic, aluminium, copper or steel tubing without distorting or crushing.
Cutter works with tubing from 3.17mm (1/8”) up to 28.5mm (1-1/8”) and has
wide rollers for even tracking of cutter wheel, built in reamer for cleaning
inside of tubing and an extra cutting wheel.
Produces a bead that is approx
Part No Description 2mm (5/64”) tall and 6.5mm(1/4”) wide.
AF98-2022 Hardline pipe cutting tool
PIPE BEADING TOOL (Large bore)
Great for beading pipe from 15.87mm (5/8”) to 152.4mm (6”) diameter.
Material thickness: aluminium up to 1.65mm (.065”) and
stainless steel / steel pipe up to 1.25mm (.050”)

Part No Description
AF98-2017 15.87mm (5/8”) to 152.4mm (6”)

LIGHT WEIGHT TUBE BENDER

A hand tool for precisely bending pipe, especially a little tweak during
installation in that hard to get position. For pipe size 1.59mm (1/16”) to
6.35mm (1/4”). The tool is able to bend tube with tube nut installed.

Part No Description
TOOLS & SHOP EQUIPMENT

AF98-2009BLK Tube Bender

SINGLE FLARE TOOL

Aeroflow’s 37o and 45o flaring tools will
work with tubing from 3.17mm (1/8”) right through to 19.05mm (3/4”).

Part No Description
AF98-2007 Flare Tool 37o (For use with AN tube nuts & sleeves)
AF98-2008 Flare Tool 45o (For use with brake lines)

TUBE STRAIGHTENER
Great for straightening out coiled aluminium, mild steel and
stainless steel pipe for that professional finish.

Part No Description
AF98-2018 Fits tube from 4.76mm (3/16”) to 12.7mm (1/2”)

PIPE BEADING TOOL (Small bore)

Great for beading 7.94mm (5/16”), 9.52mm (3/8”) and 12.7mm (1/2”) pipe.
Note: Tool is designed for beeding pipe gradually. Do Not over tighten on
first stage, tighten gradually to increase bead in multiple stages. Must use
SINGLE & DOUBLE FLARE TOOL
lubricant. This 45o tool will work with 4.75mm (3/16”) tubing. Single or double flare tubing
in hard to access areas on vehicles or onsite.
Part No Description
AF98-2019 5/16” pipe beader suits 5.77mm (7/32”) I.D. pipe Part No Description
AF98-2020 3/8” pipe beader suits 7.45mm (19/64”) I.D. pipe AF98-2057 Flare Tool 45o
AF98-2021 1/2” pipe beader suits 10.47mm (13/32”) I.D. pipe

418 aeroflowperformance.com
 TOOLS

Kit supplied with 3/16”, 1/4”,

5/16”, 3/8”, 6mm & 8mm dies.

LOW PROFILE CAR RAMPS

People running lowered cars, with body kits don’t have the room to get a jack
under their car to access a jacking point, even to simply look under their car
to inspect something. Aeroflow Performance low profile car ramps which are
designed to not slide forward when driven onto, have a lip on the edge so you
don’t drive off the ramp and very lightweight.
Length: 685mm (26-31/32”)
Width: 192mm (7-35/64”)
Lift height: 65mm (2-35/64”)
Weight per ramp 1.8kg (3.96lbs)

TOOLS & SHOP EQUIPMENT

Rated Load Capacity: 1000kg (2204lbs) each ramp
PROFESSIONAL SINGLE & DOUBLE
FLARE TOOL KIT Part No Description
The Aeroflow Brake Flaring tool is the fastest way to get a professional single or AF98-2109 Low profile car ramps (Sold as pair)
double flare everytime! This easy to use flare tool comes with 6 assorted metric AF59-2109 Replacement mesh bag
and imperial dies, including the popular 3/16” brake line which requires a double
flare to meet ADR standards. This flaring tool produces convex and double flares
to SAE and DIN standards in seconds while the smooth die does not mark the
tubing. Comes with an easy carry case.
Features:
• Easy to use • Perfect for brake or transmission lines
• Create single or double flares • 6 assorted dies included
• Carry case • 45o flare or 37o flare (optional)
Want to see how easy this tool is to use?
Check out the video www.youtube.com/aeroflowperformance

Part No Description
AF98-2048 Pro flaring kit. 3/16” (4.76mm) to 3/8” (9.52mm) tube
single & double flare. Comes with 45o flare head & dies
for brake lines.
AF59-2448 37o AN flare head and dies for flaring hardline to suit AN
adapters. 3/16” (4.76mm) to 1/2” (12.7mm)
Spare Parts
AF59-2453 Replacement 3/16” 45o die
AF59-2450 Replacement 1/4” 45o dies
AF59-2454 Replacement 3/8” 45o die
AF59-2451 Replacement Option 1 3/16” adapter
AF59-2452 Replacement Option 2 3/16” adapter
AF59-2449 Replacement handle

9” DIFF CENTRE ASSEMBLY STAND

Mount this Aeroflow Performance assembly stand to your work bench (or
engine stand) and stop wrestling with the diff housing every time you need
to replace a gear set or spool. Saves you time and energy! Rotates 360° for
total access to your Ford 9” diff assembly. Made from high quality steel with
tube O.D of 25.4mm (1.00”) and the upper mount O.D of 50.8mm (2.00”) with
a tube thickness of 2.29mm (0.09”).
Note : Bolt hole dimension measured across the front is 261.94mm (10-5/16”).
From extended centre line from top bolt holes down to the single bolt hole is
168.3mm (6-5/8”).
AF59-2448
Part No Description
AF98-2076 Ford 9” diff centre assembly stand

aeroflowperformance.com 419
 TOOLS

WORKSHOP
CREEPER

LS SERIES ENGINE LIFT PLATE

Aeroflow performance engine lift plate is a perfect way to simplify installa-
tion and removal of any LS engine. Remove intake manifold and valley plate
and bolt down in place using existing valley plate bolts. There are 4 holes for
Forget rolling around on the cold, hard, uncomfortable concrete floor and various chain placements for proper engine weight balance offset. Suits all
get yourself a Aeroflow Performance workshop creeper designed for both GM LS engines.
home use and workshop use. The six swivel castor wheels make it easy to
move around underneath a raised and supported vehicle with little effort. Part No Description
The heavy duty steel frame holds up to 130kg (286lbs) maximum. The
great design of this creeper is the fact that it easily turns into a seat for the AF98-2077 LS series engine lift plate
ultimate in comfort when working around the workshop.

Part No Description
AF98-2079 Folding workshop creeper ENGINE LIFT PLATE
Aeroflow’s engine lift plates allow you to lift
your engine up by it’s intake manifold for easier
meneuvring. You can also use them as a manifold
cover when you store your engine. These Aeroflow
WORKSHOP zinc plated carburetted engine lift plates fit standard
Holley 4150/4160 and Dominator, Rochester Quadrajet,
TROLLEY Carter, Demon, Quick Fuel, Motorcraft, Edelbrock,
Height with wheels Edelbrock Q-Jet and Carter AFB carburettors.
750mm (29-1/2”)
TOOLS & SHOP EQUIPMENT

Height without wheels Part No Description

670mm (26-3/8”)
AF98-2045 Engine Lift Plate
Width 355mm (14”)
Length without handle
710mm (28”)
Max load per shelf 30kg (66lbs)
Max load on drawer 20kg (44lbs)

Part No Description
AF98-2032 3 Tier with lockable drawer and wheels

QWIK LIFT VEHICLE JACKS

ENGINE SUPPORT BAR 500kg (1102lbs) Max load
Part No Description
AF98-2065 Engine support bar to assist in K frame removal.
Minimum width 75cm (29-1/2”). Max width 145cm (57”)

Aeroflow qwiklift vehicle

positioning jacks or Go Jacks
make manoeuvring vehicles around
the workshop or home quick, safe
and easy!
The ratchet design is superior to other hydraulic
systems as it is more durable, does not require
servicing, there are no seals to blow out under pressure
causing leaking fluid and can be stored on their side without the risk of
ENGINE
air-lock. Aeroflow rate each go jack to handle up to 680kg per wheel making LEVELING
them suitable for use with most car. They will fit under tyres up to 305mm
(12”) in width and have a foot-operated ratcheting mechanism that squeezes TOOL
the roller-equipped support legs together to lift the tyre off the ground. With 750kg (1650lbs)
four 360° swivel heavy duty castors they allow you to move your vehicle in Max load
any direction in the workshop or home with ease.
Note: Qwik-Lift jacks and holder are sold individually.

Part No Description
AF98-2129 Qwik-Lift vehicle jack 304.8mm (12”) wide rollers
1500lbs (680kg) each.
Part No Description
Note: Sold individually AF98-2064 Assists in leveling engine and gearbox installation and
AF98-2130 Qwik-lift vehicle jack stand/holder (holds 4 rollers) removal. For use with Aeroflow engine crane.

420 aeroflowperformance.com
 TOOLS

AF98-2031

AF98-2030

ENGINE CRANE
Part No Description

TOOLS & SHOP EQUIPMENT

AF98-2042 Aeroflow’s Heavy-Duty 2000kg (4409lbs) engine crane
is perfect for your workshop or garage! It folds up for AF98-2033
neat storage and is powder coated black.

ENGINE STANDS
Part No Description Max load Wheels
AF98-2030 H Frame engine stand 1000lb (453kg) 4 wheels
AF98-2031 C frame engine stand 1250lb (567kg) 4 wheels
AF98-2033 A frame engine stand 2000lb (910kg) 5 wheels

Sold Individually

CHASSIS STAND
Aeroflow’s Black Chassis-Frame stand is robust and strong to get your race
car in perfect position to work on. Heavy duty caster wheels make moving
your race car around the workshop easy. Robust fabrication won’t buckle ENGINE CRADLES
under high load capacity. The chassis-frame stand is collapsible to lay flat for Engine Cradles with solid steel wheels. Made of 25.4mm (1”) square tubing
easy storage, has a brake on each stand to prevent rolling when working on with black powder coating. Stands include Grade 5 fasteners and may be
the car and is lightweight. load rated to 340kg (750lb) per stand. easily disassembled for storage. Max load 450kg (990lbs)
Stands are adjustable to four different heights: 290mm (11-1/2”),
342mm (13-1/2”), 393mm (15-1/2”) and 444.5mm (17-1/2”).
Part No Description
Part No Description AF98-2026 Engine cradle to suit Chevy
AF98-2035 Engine cradle to suit LS Chevy
AF98-2054 Chassis stand will fit standard & raised rails
AF98-2027 Engine cradle to suit Ford
AF98-2058 Engine cradle to suit Holden

aeroflowperformance.com 421
 TOOLS & MARKETING

AEROFLOW STICKER SHEET

Part No Description

FENDER / GUARD COVER AF99-2001 Contains large and small Aeroflow logos

Aeroflow’s fender covers are perfect for mechanics and restorers alike.
Protect your fenders from scratches, dings, grease, and other grunge when
working on your car with one of our Aeroflow fender covers. Made from strong
PVC foam and reinforced with nylon mesh. The black non-slip material will
not harm paint, adheres to slick surfaces, and keeps tools from sliding off.
The fender covers measures 558mm x 863mm (34”x22”). And is completely
washable.

Part No Description
AF99-3010 Black guard cover with Aeroflow logos

AEROFLOW BANNERS
Part No Description
AF99-2000 Aeroflow Logo Banner 1.4m (4ft 7-1/8”) x 40cm (1-37/64”)
AF99-2030 Aeroflow Logo Banner 1m (3ft 3-3/8”) x 4m (13ft 1-1/2”)
TOOLS & SHOP EQUIPMENT

AEROFLOW SEAT COVERS

These universal throw over seat covers are a great gift idea and can be used
to protect your upholstery or cover up torn seats. Featuring the Aeroflow logo
they are as fashionable as they are functional. For front bucket seats only. AEROFLOW NITRO
Part No Description
FUNNY CAR STICKER
AF-THROW Aeroflow seat throws Part No Description
AF99-2003 Nitro funny car sticker (clear B/G).
135mm (5-1/8”) x 220mm (8-21/32”)

PROMOTIONAL KEY CHAIN TORCH

Description Part No Description
AEROFLOW
AF98-2006 Promotional Key Chain Torch 90o
COUNTER AF98-2028 Promotional Key Chain Torch Straight
DISPLAY

Part No Description Description

AEROFLOW BALL POINT PEN
AF99-2005 Aeroflow Hose Display & Catalogue Dispenser

Part No Description
AF99-3005 Aeroflow black pen with Yellow Aeroflow logo

422 aeroflowperformance.com
 APPAREL & MARKETING

AEROFLOW
NITRO FUNNY
CAR STUBBY
COOLERS
These awesome
stubby coolers will
keep your drink cold
while you watch your
favourite sport or enjoy
the summer vibe.

AEROFLOW ONFC STRAW HAT Part No Description

Enjoy the sunshine without the worry of the sun with the AF99-3011 Featuring Red Devil, One Bad Kiwi, Lets Boogie &
Aeroflow Performance Straw Hat. This classic straw hat features the The Bandit funny cars with ONFC logo.
outlaw nitro funny cars logo up front, draw cord fastening and a super AF99-3012 Featuring Terminator, LA Hooker, Nitro Express
wide brim. Great for the race track, SummerNats or just doing the lawns & Dark Horse funny cars with ONFC logo.
on the weekend.

Part No Description
AF99-3013 Outlaw nitro funny car straw hat

APPAREL & PROMOTIONAL

Description
AEROFLOW EAR PLUGS
Part No Description
AF99-2008 Aeroflow premium ear plugs with head band

AEROFLOW HATS WITH LED

Part No Description
AF-LEDCAP Large Flex Fit Style Cap with LED in brim
AF59-2032 Replacement 2032 style batteries

AEROFLOW
HATS

Part No Description
AF-CAP/SM Small Flex Fit Cap
AF-CAP Large Flex Fit Cap

AEROFLOW AEROFLOW HOODIE

OUTLAW FUNNY These high quality American made hoodies feature a logo on front and full
CAR HAT back print featuring HEMI funny car engine.

Part No Description
AFNITRO2HOOD-S Small Aeroflow Hoodie
Description AFNITRO2HOOD-M Medium Aeroflow Hoodie
AFNITRO2HOOD-L Large Aeroflow Hoodie
AFNITRO2HOOD-XL Extra Large Aeroflow Hoodie
Part No Description AFNITRO2HOOD-2XL Double extra large Aeroflow Hoodie
AF-ONFCCAP Aeroflow ONFC black cap (one size fits all) AFNITRO2HOOD-3XL Triple extra Large Aeroflow Hoodie

aeroflowperformance.com 423
 APPAREL

Back Print

AEROFLOW SINGLETS
These high quality made singlets feature a logo on front and full back print
featuring the Aeroflow nitro funny car engine.
KNIGHTS OF THUNDER SERIES SHIRT
Be part of the Aeroflow Nitro Funny Car Series with this awesome shirt.
Part No Description Black shirts with sleeve prints and full front and back print.
AFNITRO2SING-S Small Aeroflow T-Shirt
AFNITRO2SING-M Medium Aeroflow T-Shirt Part No Description
AFNITRO2SING-L Large Aeroflow T-Shirt RTOS-YOUTH MED Youth Medium Series T-Shirt
AFNITRO2SING-XL Extra Large Aeroflow T-Shirt RTOS-YOUTH LARGE Youth Large Series T-Shirt
AFNITRO2SING-2XL Double extra Large Aeroflow T-Shirt RTOS-S Small Series T-Shirt
RTOS-M Medium Series T-Shirt
APPAREL & PROMOTIONAL

RTOS-L Large Series T-Shirt

RTOS-XL Extra Large Series T-Shirt
RTOS-XXL Double Extra Large Series T-Shirt
RTOS-XXXL Triple Extra Large Series T-Shirt

Back Print

AEROFLOW T-SHIRT THE TERMINATOR ONFC SHIRT

These high quality American made T-shirts feature a logo on front and full The Terminator Aeroflow Outlaw Nitro Funny Car Shirt features large back
back print featuring the Aeroflow nitro funny car engine. print with logo on the front and both sleeve logos.

Part No Description Part No Description

AFNITRO2-4T Toddler Aeroflow T-Shirt (size 2-4) RTTERM-4T Toddler Size 4 Terminator Shirt
AFNITRO2-5T Toddler Aeroflow T-Shirt (size 5-6) RTTERM-5T Toddler Size 5 Terminator Shirt
AFNITRO2-YS Youth Small Aeroflow T-Shirt (Size 6-8) RTTERM-YS Youth Small 4 Terminator Shirt
AFNITRO2-YM Youth Medium Aeroflow T-Shirt (Size 10-12) RTTERM-YM Youth Medium 5 Terminator Shirt
AFNITRO2-S Small Aeroflow T-Shirt RTTERM-SMALL Small Terminator Shirt
AFNITRO2-M Medium Aeroflow T-Shirt RTTERM-MEDIUM Medium Terminator Shirt
AFNITRO2-L Large Aeroflow T-Shirt RTTERM-LARGE Large Terminator Shirt
AFNITRO2-XL Extra Large Aeroflow T-Shirt RTTERM-XL Extra Large Terminator Shirt
AFNITRO2-2XL Double extra large Aeroflow T-Shirt RTTERM-XXL Double Extra Large Terminator Shirt
AFNITRO2-3XL Triple extra Large Aeroflow T-Shirt RTTERM-XXXL Triple Extra Large Terminator Shirt

424 aeroflowperformance.com
 APPAREL

Back Print

NITRO EXPRESS ONFC SHIRT

The Nitro Express Aeroflow Outlaw Nitro Funny Car Shirt features large back
print with logo on the front and both sleeve logos.
RED DEVIL ONFC SHIRT
Part No Description
The Red Devil Aeroflow Outlaw Nitro Funny Car Shirt features large back RTNE-YM Youth Medium Nitro Express T-Shirt
print with logo on the front and both sleeve logos. RTNE-YOUTH-L Youth Large Nitro Express T-Shirt
RTNE-S Small Nitro ExpressT-Shirt
Part No Description
RTNE-M Medium Nitro ExpressT-Shirt
RTRD-SMALL Small Red Devil T-Shirt RTNE-L Large Nitro Express T-Shirt
RTRD-MEDIUM Medium Red DevilT-Shirt RTNE-XL Extra Large Nitro Express T-Shirt

APPAREL & PROMOTIONAL

RTRD-LARGE Large Red Devil T-Shirt RTNE-XXL Double Extra Large Nitro Express T-Shirt
RTRD-XL Extra Large Red Devil T-Shirt RTNE-XXXL Triple Extra Large Nitro Express T-Shirt
RTRD-XXL Double Extra Large Red Devil T-Shirt
RTRD-XXXL Triple Extra Large Red Devil T-Shirt

FIRE CHIEF ONFC SHIRT

NITRO SHERIFF ONFC SHIRT The Fire Chief Wheel Stander Shirt features large back print with logo on the
front and both sleeve logos.
The Nitro Sheriff Wheel Stander Shirt features large back print with logo on
the front and both sleeve logos. Part No Description
RTFIRE-4T Toddler Size 4 Fire Chief T-Shirt
Part No Description RTFIRE-5T Toddler Size 5 Fire Chief T-Shirt
RTNS-YOUTH 5 Youth Size 5 Nitro Sheriff T-Shirt RTFIRE-YS Youth Small Fire Chief T-Shirt
RTNS-YOUTH SML Youth Small Nitro Sheriff T-Shirt RTFIRE-YM Youth Medium Fire Chief T-Shirt
RTNS-YOUTH MED Youth Medium Nitro Sheriff T-Shirt RTFIRE-YL Youth Large Fire Chief T-Shirt
RTNS-YOUTH LGE Youth Large Nitro Sheriff T-Shirt RTFIRE-SMALL Small Fire Chief T-Shirt
RTNS-S Small Nitro Sheriff T-Shirt RTFIRE-M Medium Fire Chief T-Shirt
RTNS-M Medium Nitro Sheriff T-Shirt RTFIRE-L Large Fire Chief T-Shirt
RTNS-L Large Nitro Sheriff T-Shirt RTFIRE-XL Extra Large Fire Chief T-Shirt
RTNS-XL Extra Large Nitro Sheriff T-Shirt RTFIRE-XXL Double Extra Large Fire Chief T-Shirt
RTNS-XXL Double Extra Large Nitro Sheriff T-Shirt RTFIRE-XXXL Triple Extra Large Fire Chief T-Shirt
RTNS-XXXL Triple Extra Large Nitro Sheriff T-Shirt
aeroflowperformance.com 425
 APPAREL

Back Print Back Print

LA HOOKER ONFC SHIRT DARK HORSE ONFC SHIRT

The LA Hooker Aeroflow Outlaw Nitro Funny Car Shirt features large back The Dark Horse Aeroflow Outlaw Nitro Funny Car Shirt features large back
print with logo on the front and both sleeve logos. print with logo on the front and both sleeve logos.

Part No Description Part No Description

RTLA-YOUTH MED Youth Large LA Hooker T-Shirt RTDH-YOUTH MED Youth Large Dark Horse T-Shirt
RTLA-YOUTH LARGE Youth X Large LA Hooker T-Shirt RTDH-YOUTH LARGE Youth X Large Dark Horse T-Shirt
RTLA-S Small LA Hooker T-Shirt RTDH-S Small Dark Horse T-Shirt
APPAREL & PROMOTIONAL

RTLA-M Medium LA Hooker T-Shirt RTDH-M Medium Dark Horse T-Shirt

RTLA-L Large LA Hooker T-Shirt RTDH-L Large Dark Horse T-Shirt
RTLA-XL Extra Large LA Hooker T-Shirt RTDH-XL Extra Large Dark Horse T-Shirt
RTLA-XXL Double Extra large LA Hooker T-Shirt RTDH-XXL Double Extra Large Dark Horse T-Shirt
RTLA-XXXL Triple Extra large LA Hooker T-Shirt RTDH-XXXL Triple Extra Large Dark Horse T-Shirt

Back Print

THE BANDIT ONFC SHIRT Back Print

The Bandit Aeroflow Outlaw Nitro Funny Car Shirt features large back print ONE BAD KIWI ONFC SHIRT
with logo on the front and both sleeve logos.
The One Bad Kiwi Aeroflow Outlaw Nitro Funny Car Shirt features large back
Part No Description print with logo on the front and both sleeve logos.
RTBAN-YOUTH MED Youth Medium The Bandit T-Shirt Part No Description
RTBAN-YOUTH LARG Youth Large The Bandit T-Shirt
RTBAN-S Small The Bandit T-Shirt RTOBK-SMALL Small One Bad Kiwi T-Shirt
RTBAN-M Medium The Bandit T-Shirt RTOBK-MEDIUM Medium One Bad Kiwi T-Shirt
RTBAN-L Large The Bandit T-Shirt RTOBK-LARGE Large One Bad Kiwi T-Shirt
RTBAN-XL Extra Large The Bandit T-Shirt RTOBK-XL Extra Large One Bad Kiwi T-Shirt
RTBAN-XXL Double Extra Large The Bandit T-Shirt RTOBK-XXL Double Extra Large One Bad Kiwi T-Shirt
RTBAN-XXXL Triple Extra Large The Bandit T-Shirt RTOBK-XXXL Triple Extra Large One Bad Kiwi T-Shirt

426 aeroflowperformance.com
 APPAREL

Back Print
Back Print

LETS BOOGIE ONFC SHIRT AGRO NITRO HOT RODS SHIRT

The Lets Boogie Aeroflow Outlaw Nitro Funny Car Shirt features large back
The AGRO Aeroflow Outlaw Hot Rods Shirt features large back print with logo
print with logo on the front and both sleeve logos.
on the front and both sleeve logos.
Part No Description
Part No Description
RTLB-4T 4 Toddler Lets Boogie T-Shirt
RTAGRO-4T 4 Toddler Agro T-Shirt
RTLB-5T 5 Toddler Lets Boogie T-Shirt
RTAGRO-5T 5 Toddler Agro T-Shirt
RTLB-YS Youth Small Lets Boogie T-Shirt
RTAGRO-YS Youth Small Agro T-Shirt
RTLB-YM Youth Medium Lets Boogie T-Shirt
RTAGRO-YM Youth Medium Agro T-Shirt
RTLB-YL Youth Large Lets Boogie T-Shirt
RTAGRO-YL Youth Large Agro T-Shirt
RTLB-YXL Youth Extra Large Lets Boogie T-Shirt

APPAREL & PROMOTIONAL

RTAGRO-S Small Agro T-Shirt
RTLB-S Small Lets Boogie T-Shirt
RTAGRO-M Medium Agro T-Shirt
RTLB-M Medium Lets Boogie T-Shirt
RTAGRO-L Large Agro T-Shirt
RTLB-L Large Lets Boogie T-Shirt
RTAGRO-XL Extra Agro T-Shirt
RTLB-XL Extra Large Express T-Shirt
RTAGRO-XXL Double Extra Large Agro T-Shirt
RTLB-XXL Double Extra Large Lets Boogie T-Shirt
RTAGRO-XXXL Triple Extra Large Agro T-Shirt
RTLB-XXXL Triple Extra Large Lets Boogie T-Shirt

Back Print

KING KONG ONFC SHIRT

Back Print
The King Kong Aeroflow Outlaw Nitro Funny Car Shirt features large back
print with logo on the front and both sleeve logos.
SPOOKY NITRO HOT RODS SHIRT
Part No Description
The Spooky Aeroflow Nitro Hot Rods Shirt features large back print with logo
RTKK-4T Toddler Medium King Kong T-Shirt on the front and both sleeve logos.
RTKK-5T Toddler Large King Kong T-Shirt
RTKK-YS Youth Small King Kong T-Shirt Part No Description
RTKK-YM Youth Medium King Kong T-Shirt
RTKK-YL Youth Large King Kong T-Shirt RTSPOOKY-S Small Spooky T-Shirt
RTKK-S Small King Kong T-Shirt RTSPOOKY-M Medium Spooky T-Shirt
RTKK-M Medium King Kong T-Shirt RTSPOOKY-L Large Spooky T-Shirt
RTKK-L Large King Kong T-Shirt RTSPOOKY-XL Extra Large Spooky T-Shirt
RTKK-XL Extra King Kong T-Shirt RTSPOOKY-XXL Double Extra Spooky T-Shirt
RTKK-XXL Double Extra Large King Kong T-Shirt RTSPOOKY-XXXL Triple Extra Spooky T-Shirt
RTKK-XXXL Triple Extra Large King Kong T-Shirt
aeroflowperformance.com 427
 APPAREL

Back Print
Back Print
CHUCKY’S TOY NITRO HOT RODS SHIRT
PSYCHO NITRO HOT RODS SHIRT
The Chucky’s Toy Aeroflow Nitro Hot Rods Shirt features large back print with
logo on the front and both sleeve logos. The Psycho Aeroflow Nitro Hot Rods Shirt features large back print with logo
on the front and both sleeve logos.
Part No Description
RTCHUCKY-SML Small Chucky’s Toy T-Shirt
Part No Description
RTCHUCKY-MED Medium Chucky’s Toy T-Shirt RTPSYCHO-S Small Psycho T-Shirt
RTCHUCKY-LGE Large Chucky’s Toy T-Shirt RTPSYCHO-M Medium Psycho T-Shirt
RTCHUCKY-XL Extra Large Chucky’s Toy T-Shirt RTPSYCHO-L Large Psycho T-Shirt
APPAREL & PROMOTIONAL

RTCHUCKY-XXL Double Extra Large Chucky’s Toy T-Shirt RTPSYCHO-XL Extra Large Psycho T-Shirt
RTCHUCKY-XXXL Triple Extra Large Chucky’s Toy T-Shirt RTPSYCHO-XXL Double Extra Large Psycho T-Shirt
RTPSYCHO-XXXL Triple Extra Large Psycho T-Shirt

Back Print

BERZERK NITRO HOT RODS SHIRT

The Berzerk Aeroflow Nitro Hot Rods Shirt features large back print with logo
on the front and both sleeve logos.

Part No Description
RTBERZERK-S Small Berzerk T-Shirt
RTBERZERK-M Medium Berzerk T-Shirt
RTBERZERK-L Large Berzerk T-Shirt
RTBERZERK-XL Extra Large Berzerk T-Shirt
RTBERZERK-XXL Double Extra Large Berzerk T-Shirt
RTBERZERK-XXXL Triple Extra Large Berzerk T-Shirt

428 aeroflowperformance.com
 FITTING SPECIFICATION CHART

MALE NPT IDENTIFICATION CHART

The line drawings below depict the actual sizes of the various common NPT thread sizes. If you are unsure as to what thread size you are using lay your
fitting over the appropriate drawing to determine its size.

1” 3/4” 1/2” 3/8” 1/4” 1/8”

MALE AN/ORB ADAPTER IDENTIFICATION CHART

The line drawings below depict the actual sizes of the various common AN/ORB thread sizes. If you are unsure as to what size fitting you have lay your
fitting over the appropriate drawing to determine its size.

NOTE: - AN and ORB thread are the same diameter. AN seals with the flare, ORB seals with an O-ring.

-16 -12 -10 -8 -6 -4 -3

AN HEX OD IDENTIFICATION CHART

The line drawings below depict the actual sizes of the various common types of fittings, hose ends and adapters.
The number is SAE spanner size equivalent.

FITTING GUIDES & CHARTS

-16 -12 -10 -8 -6 -4

NPT AN NUT
(National Pipe Thread)
AN THREAD
Thread Threads Closest Hex B Nut S Nut
Thread Thread Threads Max Torque
Size Per Inch AN Size Sizes AN Side Hose Side
Size Size SAE Per Inch ft/lbs
1/16” 27 3 -3 1/2” 1/2”
-4 9/16” 1/4” -3 3/8 24 8.75
1/8” 27 4
-6 11/16” 19/64” -4 7/16 20 11.5
1/4” 18 6
-8 7/8” 7/8” -5 1/2 20 14.3
3/8” 18 8
-10 1” 1-1/16” -6 9/16 18 16.25
1/2” 14 10
-12 1-1/4” 1-3/16” -7 5/8 18 19.5
3/4” 14 12
-16 1-1/2” 1-7/16” -8 3/4 16 29
1” 11-1/2 16
-20 1-13/16” 1-3/4” -10 7/8 14 35
1-1/4” 11-1/2 20
-12 1-1/16 12 45
1-1/2” 11-1/2 24
-16 1-5/16 12 70
2” 11-1/2 32
-20 1-5/8 12 85

TORQUE VALUES FOR AN TORQUE VALUES FOR AN TORQUE VALUES FOR AN

HOSE END FITTINGS TUBE FITTINGS ORB FITTINGS & ADAPTORS
Dash Aluminium Newton Dash Aluminium Newton Dash Aluminium Newton
Size Pound Size Pound Size Pound
-3 70 - 105 7.90 - 11.86 -3 30 - 45 3.39 - 5.08 -3 28 - 32 3.16 - 3.62
-4 100 - 140 11.29 - 15.81 -4 40 - 60 4.52 - 6.78 -4 38 - 42 4.29 - 4.74
-6 150 - 195 16.94 - 22.03 -6 75 - 115 8.47 - 12.99 -6 70 - 80 7.91 - 9.04
-8 270 - 350 30.50 - 39.54 -8 150 -225 16.95 - 25.42 -8 145 - 155 16.38 - 17.51
-10 360 - 430 40.67 - 48.58 -10 200 - 315 22.60 - 35.59 -10 190 - 210 21.47 - 23.73
-12 460 - 550 51.97 - 62.14 -12 300 - 450 33.90 - 50.84 -12 285 - 315 32.20 - 35.59
-16 700 - 840 79.80 - 94.90 -16 500 - 630 56.49 - 71.18 -16 475 - 525 53.67 - 59.32
-20 850 - 1020 96.03 - 115.24 -20 600 - 810 33.90 - 50.84 -20 570 - 630 64.40 - 71.18

aeroflowperformance.com 429
 TECHNICAL CHARTS

TEMPERATURE CONVERSION GUIDE

FRACTION - DECIMALS
CELSIUS (oC) FAHRENHEIT (oF) - MILLIMETRES
225 437 MM
FRA DEC
220 428
215 419 1/64 .0156 .396
210 410 1/32 .0312 .793
205 401 KRYPTALON 3/64 .0468 1.190
200 392 200 SERIES 1/16 .0625 1.587
195 383 250 SERIES 5/64 .0781 1.984
190 374 TEFLON 3/32 .0937 2.381
185 365 7/64 .1093 2.778
180 356 1/8 .125 3.175
175 347 9/64 .1406 3.571
170 338 5/32 .1562 3.968
EXTEME RACE 165 329 11/64 .1718 4.365
TRANSMISSION 160 320 3/16 .1875 4.762
OIL 155 311 13/64 .2031 5.159
HEAT RANGE 150 302 7/32 .2187 5.556
145 293 100 SERIES
15/64 .2343 5.953
140 284 450 SERIES
1/4 .250 6.350
135 BOILING POINT 275 BRAIDED
17/64 .2656 6.746
130 OF CAR WATER 266 RUBBER
9/32 .2812 7.143
125 WITH15 PSI 257 19/64 .2968 7.540
120 RADIATOR CAP 248 ENGINE 500 SERIES 5/16 .3125 7.937
115 239 OIL RUBBER HOSE 21/64 .3281 8.334
110 230 HEAT WITH CLAMPS 11/32 .3437 8.731
105 221 RANGE
23/64 .3593 9.128
100 212 3/8 .375 9.525
STANDARD
95 203 25/64 .3906 9.921
TRANSMISSION STANDARD
90 194 13/32 .4062 10.318
OIL TEMP ENGINE RUNING
85 185 27/64 .4218 10.715
80 TEMP 176 7/16 .4375 11.112
75 167 29/64 .4531 11.509
70 158 15/32 .4687 11.906
65 149
FITTING GUIDES & CHARTS

31/64 .4843 12.303

60 140 1/2 .500 12.700
55 131 33/64 .51.56 13.096
50 122 17/32 .5312 13.493
45 113 35/64 .5468 13.890
40 104 9/16 .5625 14.287
35 95 400
400
SERIES
SERIES 37/64 .5781 14.684
30 86 RUBBER
RUBBERHOSE
HOSE 19/32 .5937 15.081
25 77 WITH
WITH
CLAMPS
CLAMPS 39/64 .6093 15.478
20 68 5/8 .625 15.875
15 59 41/64 .6406 16.271
10 50 21/32 .6562 16.668
5 FREEZING POINT 41 43/64 .6718 17.065
0 OF WATER 32 11/16 .6875 17.462
-5 23 45/64 .7031 17.859
-10 14 23/32 .7187 18.256
-15 5 47/64 .7343 18.653
-20 -4 3/4 .750 19.050
-25 -13 49/64 .7656 19.446
-30 -22 25/32 .7812 19.843
-35 -31 51/64 .7968 20.240
-40 -40 13/16 .8125 20.637
53/64 .8281 21.034
Recomendations 27/32 .8437 21.431
For water and coolant you can use any of the hose ranges. Must use 55/64 .8593 21.828
7/8 .875 22.225
clamps on the 400 Series rubber hose. Replace hoses if engine temp
57/64 .8906 22.621
rises over 100oC (212oF) 29/32 .9062 23.018
For engine oil minimum 100 or 450 series hose is recommended, 200 59/64 .9218 23.415
& 250 series are recommended for racing applications. 15/16 .9375 23.812
For Transmissions and power steering, 200 or 250 series teflon hose 61/64 .9531 24.209
must be used. 31/32 .9687 24.606
63/64 .9843 25.003
1 1.000 25.400

BSPT Thread Chart

Tape Threads Pitch dia Core dia Drill size Drill size
Size BSPT per inch (inches) (inches) (inches, wire & letters) (mm)

1/16 BSPT 28 0.304 0.2583 (0.2520 inch) 6.4mm

1/8 BSPT 28 0.383 0.3372 (0.3307 inch) 8.4mm
1/4 BSPT 19 0.518 0.4506 (0.4409 inch) 11.2mm
3/8 BSPT 19 0.656 0.5886 (0.0507 inch) 14.75mm
1/2 BSPT 14 0.825 0.7336 (0.7185 inch) 18.25mm
3/4 BSPT 14 1.041 0.9496 (0.93350 inch) 23.75mm
1 BSPT 11 1.309 1.1926 (1.1811 inch) 30mm

430 aeroflowperformance.com
 TECHNICAL CHARTS

IMPERIAL TO METRIC METRIC TO IMPERIAL

Imperial equivalent to Metric Metric equivalent to Imperial
inches ins x 25.4 = millimetres mm mm x 0.04 = ins
feet ft x 0.3 = metres m m x 3.3 = ft
yards yds x 0.9 = metres m m x 1.1 = yds
miles mi x 1.6 = kilometres km km x 0.6 = mi
sq inch in2 x 6.5 = sq centimetre cm2 cm2 x 0.16 = in2
sq feet ft2 x 0.09 = sq metres m2 m2 x 11 = ft2
sq yard yd2 x 0.8 = sq metres m2 m2 x 1.2 = yd2
cu.in in3 x 16 = cu.centimetres cm3 cm3 x 0.06 = in3
cu.ft ft3 x 0.03 = cu.metres m3 m3 x 35 = ft3
cu.yd yd3 x 0.08 = cu.metres m3 m3 x 1.3 = yd3
(liq) quart qt x 0.9 = litre l l x 1.05 = qt
gallon gal x 0.004 = cu.metres m3 m3 x 264.2 = gal
(advp) ounce oz x 28.3 = grams g g x 0.035 = oz
(advp) pound lb x 0.45 = kilogram kg kW x 1.34 = lb
horsepower hp x 0.75 = kilowatt kW kg x 2.2 = hp
ft per second ft/s x 0.304 = met.Per second m/s m/s x 3.28 = ft/s
ounce-force ozf x 0.278 = newtons N N x 3.597 = ozf
pound-force lbf x 4.448 = newtons N N x 0.224 = lbf
foot pounds ft.lb x 1.355 = newton-metres N.m N.m x 0.737 = ft.lb
foot pounds ft.lb x 1.355 = joules j j x 0.737 = ft.lb
in.pounds in.lb x 0.112 = newton-metres N.m N.m x 8.85 = in.lb
lb per foot lb/ft x 14.59 = newtons-metres N.m N.m x 0.068 = lb/ft
cycles per sec cps x 1 = hertz Hz Hz x 1 = cps
Brit therm unit Btu x 1055 = joules j j x 0.0009 = Btu

PRESSURE CONVERSION BSPT Thread Chart

PSI KPA BAR
Tape Threads Drill size
10 69 0.7
Size BSPT per inch (mm)
100 689 6.9

FITTING GUIDES & CHARTS

200 1379 13.8 1/8 BSPT 28 8.4mm
300 2068 20.7 1/4 BSPT 19 11.2mm
400 2758 27.6 3/8 BSPT 19 14.75mm
600 4137 41.4 1/2 BSPT 14 18.25mm
800 5516 55.2 5/8 BSPT 14 23.75mm
1000 6895 68.9 3/4 BSPT 14 23.75mm
1500 10342 103.4 7/8 BSPT 14 23.75mm
2000 13790 137.9 1 BSPT 11 30mm
3000 20684 206.8
4000 27579 275.8
5000 34474 344.7
6000 41369 413.7

COMMON THREAD CONNECTIONS

aeroflowperformance.com 431
 TECHNICAL INFORMATION

HOSE MAINTENANCE
Hose assemblies in operation should be inspected on a regular basis for leakage, corrosion, abrasion, kinking or any other signs of wear or possible damage. Worn
and or damaged hose assemblies should be replaced immediately.

CLEANING
Clean out hose assemblies by using compressed air. Assemblies may be rinsed out with turpentine if the hose is compatible with oil. Otherwise, rinse with warm
water being careful that the water does not exceed the maximum temperature rating of the hose.

INSPECTION
Inspect and examine the hose end assembly internally for cut or bulged tube, obstruction’s and debris. For compression type fittings be sure that the socket nut to
hex gap is sufficient (see hose end assembly videos if you are unclear). If the fitting is a swivel type, check swivel and drag as nuts should swivel freely. Check the
lay line of the hose to be sure the assembly is not twisted. Cap the end of the assembly with plastic covers to keep them clean and free on dirt and debris for stor-
age.

HYDROSTATIC PRESSURE TESTING

The hose end assembly should be hydrostatically tested at twice the recommended working pressure of the hose. Test pressure should be held for not more than 60
seconds and no less than 30 seconds. When test pressure is reached, visually inspect the hose assembly for any leaks or signs of weakness and any movement of
the hose end in relation to the hose. If any one of these are a concern that is cause for rejection.
CAUTION
Testing should be conducted by appropriately trained personnel in an approved environment with barriers to protect the operator.

SERVICE LIFE FACTORS

Hose assemblies like other products, have a service life. The specific service life of a given hose assembly in a given application is dependent on many variable
factors, including the following.

BEND RADIUS
Recommended bend radius is based on the maximum operating pressure with no flexing of the hose assembly. Safe operating pressure reduces when the bend
radius is reduced below the recommended minimum. Flexing the hose to less than the minimum bend radius will shorten hose life.

VACUUM SERVICE
Increased negative pressures needed for -12 hoses and larger are suitable for a hose that has not suffered external damage, kinking or tight radius bends. If greater
negative pressures are required for -12 and larger hose, the use of an internal coil support spring is needed.

OPERATING PRESSURE
FITTING GUIDES & CHARTS

Aeroflow performance products hose end assemblies are pressure rated for continuous operation at the maximum operating pressure specified for the hose. Typi-
cally, the operating pressure is 1/4 of the minimum burst pressure.

BURST PRESSURE
These are test values only and are valid to hose assemblies that have not been in the field and assembled for less than 4 weeks.

PRESSURE SURGES
A common issue in hydraulic systems is pressure surges which may exceed the maximum operating pressure of a hose and will shorten life and must be taken into
consideration. A rapid rise in pressure will not be indicated on many common pressure gauges but can be measured using electronic gauges. In fluid systems where
surges are severe choose a hose that has a higher operating pressure.

HIGH PRESSURE
High pressure fluid systems especially over 250PSI should be treated as hazardous and extra care taken when routing and securing lines to prevent whiplash in the
event of a failure or crash. Adequately protected from external shock and mechanical or chemical damage.

AMBIENT TEMPERATURES
Extremely high or low ambient (outside of hose) temperatures will affect the hose cover, strength and structure of the hose, thus leading to a reduced hose life.
Ambient Temperatures combined with internal fluid temperatures are a very important factor. Aeroflow Performance offers many heat insulation solutions. Please
contact the Aeroflow tech department for recommendations.

OPERATING TEMPERATURES
Operating temperatures specified in our chart reflect that of typical heat ranges found in certain applications. High heat conditions may have a damaging effect
on rubber hoses and cause degradation, also reduce the fitting retention. It is extremely import to choose the correct hose for the application. If heat is a concern,
choose a PTFE lined hose or Hard Line that is suitable for the application. Continuous use of hose assemblies at or close to maximum temperature ratings will
shorten life of your hose assembly.

CHEMICAL RESISTANCE
Always take into consideration the chemicals used to clean an engine bay and or undercarriage, remembering that the hose end and hose make up includes O-
rings, anodising and the hose cover. Too harsh of a chemical can damage the function and appearance of the hose assembly and may reduce life.

IMPORTANT :
HOSE ASSEMBLY INSPECTION
Hose assemblies in operation should be inspected on a regular basis for leakage, corrosion, abrasion, kinking or any other signs of wear or possible damage. Worn
and or damaged hose assemblies should be replaced immediately.
CAUTION ABOUT FUEL INJECTION
All hoses in the Aeroflow range are suitable for use with leaded and unleaded fuel. However, caution must be used in fuel injection systems that recirculate fuel. This
causes fuel to oxidize which can attack the hose inner liner and reduce life of the hose assembly. To increase service life, keep the time of exposure to oxidised fuel
to a minimum. Drain and flush the fuel system with fresh fuel.
CAUTION ABOUT METHANOL AND ETHANOL FUELS
All hoses in the Aeroflow range are suitable for use with methanol and ethanol fuel. However these fuels are extremely corrosive and will attack the fuel system if the
system is not flushed and prepared for storage correctly. Methanol and Ethanol is also hygroscopic, meaning it will absorb water vapour directly from the atmosphere
and contaminate the fuel system and shorten the working life of entire fuel system components. Fuel additives and stabilizers help but the best way is to flush and
store with unleaded fuel.

432 aeroflowperformance.com
 TECHNICAL INFORMATION

AEROFLOW ALTERNATORS
Performance 1 wire self exciting alternator available from 100 up to 200 amp
depending on model. For full range of Aeroflow alternators see page 241.

HOW TO CHOOSE AN ALTERNATOR

• Consider your total electrical demand (refer to chart)
• Select the correct alternator needed to cover your demand
• Add a charge wire to handle the Amps (refer to chart)
• Determine the correct pulley ratio for your application

# Accessories Ex. Amps

STEP 1: Determine the AMP load 1 CDI ignition 6 - 36
• Make a list using the chart as reference 2 HEI Ignition 6 - 10
• Total the AMP draw 3 Electric Fuel Pump - each 7 -15 ea
• Select your Alternator 4 Eletcric Water Pump 12 - 25
STEP 2: Select the Charge Wire 5 Electric Fans each 10 - 50 ea
6 Headlights / Tail lights 10 - 20
Amp
Output + Length
of Wire = Gauge Size
Needed
7
8
Brake Blowers each
Driver cooling suit
8 -c 10 ea
15 - 30

FITTING GUIDES & CHARTS

WIRE LENGTH 9 Data Recorder 2 - 10

AMPS 5’ - 10’ 11’ - 19’ 20’ - 28’ 10 Trans Brake 12 - 20

30-70 10 - 8g 8 - 6g 6 - 4g 11 Nitrous Solenoid 5 - 30 ea
70-100 8 - 6g 6 - 4g 4 - 2g 12 Gauges 2-6
100-150 6 - 4g 4 - 2g 2 - 0g 13 On Board Radio 4 - 10
150-200 4 - 2g 2 - 0g 0 - 1/0g 14 Line Lock 4-8
15 Delay Box 8 - 12
16 Throttle Stop 5 - 15
STEP 1: Pulley Selection 17 Intercooler Pump 10 - 20
It is important for reliable alternator operation to establish
the correct pulley ratio for your specific needs. Typical circle 18 Other
track ratios can be as low as 1:1, drag racing 2:1 and TOTAL AMP DRAW
street ratios 3:1. These typical ratios are only a starting point
so make sure you consider your alternator pulley and match
ALTERNATOR PULLEYS
it to your specific application. WARNING O.D. Part
MAX Alternator Shaft RPM
28” 181
18,000 rpm Aeroflow Style
4.0” 182
5.25” 183
Alternator RPM
Two belts, one driving intermediate
accessory pulley Fig.A
One belt drives all accessories Fig. B
=
Crank Pulley O.D.
Alternator Pulley O.D. x Engine RPM
(Tach)

Idler
pulley
Alternator RPM
One belt, drives crankshaft and
accessory pulley.
Accessory changes O.D. and drives
= Water Pump Pulley O.D.
Alternator Pulley O.D.
x Water Pump
RPM
Fig.A Fig.B
alternator Fig.C
Alternator
Water pump pulley
pulley
Crank Pulley O.D.
Water Pump Pulley O.D. x Engine RPM
(Tach) = Water Pump
RPM
Pulley mounted to front of
water pumpulley

Crank
pulley
Fig.C

aeroflowperformance.com 433
 INSTALL KIT INSTRUCTIONS

FITTING & HOSE

INSTALLATION KIT (-4 to -12)
Aeroflow has designed this rotary vice to make the
installation of 100 and 150 series taper AN fittings to
Aeroflow hoses easy. The installation kit comes with
everything you need to install hose to AN fittings quickly and without damage or
marking to the fittings. Also, the kit quickly and easily transforms into a vice and
comes in a handy carry case.

Part No Description
AF98-2000 Hose Installation Kit

HOSE INSTALLATION KIT INSTRUCTIONS (for -4 to -12 100 & 150 series Hose Ends)
Until now a purpose-built tool for the connection of braided steel hose and fittings has been lacking from the automotive market. Installation was performed
manually, something that was difficult, labour intensive and risked injury. Due to demands in the high performance and automotive industry, Aeroflow’s purpose
built Hose Installation Kit solves these problems.
FITTING GUIDES & CHARTS

Unlike other kits on the market, Aeroflow’s Hose Installation Kit incorporates a flexible design making it easy to assemble as well as making the replacement of
parts simple. Made of aluminium, steel and iron to prevent corrosion, Aeroflow’s Hose Installation Kit is made to last. It also comes in a convenient carry case for
easy transportation.

Release the hose clamp assembly by releasing Slide the cover back and slide the socket nut Place the socket nut into the tool holder and the
the thumbscrews. Slide the socket nut holder insert into the tool and the hose clamp inserts into hose into the hose clamp. Place the nut into the
open. the holder. nut clamping mechanism and slide the cover
closed.

Place the stainless steel braided hose into the With the cover closed and the hose held in place To transform the Aeroflow Hose Installation Kit
hose clamping mechanism and tighten the two begin rotating the wheel until it cannot rotate from an installation tool to a vice simply slide
screws to hold it in place. any further. Measure depth of nut to prevent the hose clamp and handwheel assembly off the
overthreading. base.

Unscrew the socket nut holder and Slide the two vice-jaw pieces onto the base of the
screw on the vice adaptor. assembly. Slide the handwheel assembly out and
slide back into the groove of the vice piece.

434 aeroflowperformance.com
 HOSE ASSEMBLY INSTRUCTIONS

100 SERIES ASSEMBLY INSTRUCTIONS

Wrap masking or electrical tape tightly Mark the hose with a felt pen to Place the socket in a vice, remove the tape from
around the hose to prevent fraying and detect any movement while the the hose and push it into the nut while twisting the
cut with hose cutters for best results. assembly process is completed. hose. Aeroflow’s soft jaw vice adapters (inset) are
recommended to prevent damage to fittings.

Tighten the fitting until the socket has a gap of

Lubricate the threads on the hose and Holding the hose, push the socket nut
approximately 1.5mm. Check that the mark on
nipple with Aeroseal and place the nipple onto the nipple thread.
the hose has not moved from the end of the
in a vice.
socket nut.

200 SERIES ASSEMBLY INSTRUCTIONS

FITTING GUIDES & CHARTS

Using hose cutters cut the braided hose to the required Thread the socket through the hose with Insert the olive between the braid and the
length by wrapping masking or electrical tape around the threaded end of the socket towards Teflon® tube making sure none of the braid
it to prevent fraying. Trim the hose of any stray braid to the cut end and push it back. is trapped between the Teflon and the olive.
form a clean cut (inset).

Push the olive into the braid using an olive tool or a Push the hose back onto the nipple. Using Place the socket in the vice to complete
hard surface ensuring the olive has been inserted Aeroseal, lubricate the nipple and start the tightening process. Ensure the gap
square. threading the socket onto the nipple threads between the nipple and the socket is no
tightening hard. bigger than approximately 1mm.

Note: Teflon is a registered trademark of Du Pont

400 SERIES ASSEMBLY INSTRUCTIONS

Cut the hose square with a hose Lubricate both the inside of the hose and the outside of Push the hose end into the barb
cutter or sharp knife. the nipple using Aeroseal. Clamp the fitting into a vice. until it fits snugly under the collar.

aeroflowperformance.com 435