CERTIFICATE OF THOROUGH EXAMINATION OF WEBBING SLING
Job Number: MSCJ 21232 Certificate Number: MSC/WS/31966/22/09E
Date Issued : 09-05-2022 Date of Inspection: 09-05-2022 Type of Examination: Thorough
Inspection Procedure Reference Standard.: BS EN 1492-1:2000+A1:2008
MSC/TM/09
Name and Address of employer for whom the thorough examination was Address of premises at which the examination was made:
THIRD DIMENSION HEAVY EQUIPMENT RENTAL ABU DHABI , UAE
ABU DHABI
Description of the equipment: Safe Date of Date of last
Qty. ID No. Safety Working manufacture if thorough
Flat woven Polyester webbing sling Factor Load(s): known: examination:
Length : 6.0 meter
Ply :2
Colour : Blue
504908
02 7:1 8.0 tonne NA NEW
Manufacturer : Compass Safety 504905
Was the examination carried out:
Is this the first examination after
YES NO Within an interval of 6 months? YES NO
installation or assembly at a new site
or location? Within an interval of 12 months? YES NO
If the answer to the above question is In accordance with an examination
YES NO
scheme?
YES NO
YES has the equipment been installed
After the occurrence of exceptional
correctly? YES NO
circumstances?
Identification of any part found to have a defect which is or could become a danger to persons and a description of the defect::
(If none state NONE)
NONE
Is the above a defect which is of immediate danger to persons
YES NO
Is the above a defect which is not yet but could become a danger to persons:
YES by:
(If YES state the date by when)
Particulars of any repair, renewal or alteration required to remedy the defect identified above:
NONE
Particulars of any tests carried out as part of the examination: (If none state NONE)
Visual Examination
Equipment’s / tools used : MSC-E-02 , MSC-E-07
IS THIS EQUIPMENT FIT FOR PURPOSE? YES NO
Name & Qualifications of person making this Name of person authenticating this report: Latest date by which next thorough
report: M FARHAN Signature: examination must be carried out:
08-11-2022
MASTER SAFETY CONSULTANCY LLC, P. O. BOX 92198, MUSSAFAH M-10, ABU DHABI –UAE, TEL: 02-5535560, FAX: 02-5535562
Doc. No. QF-07/03-09 Rev. No. : 02 Issue Date: 01-05-2020
Continuation of Certificate Number: MSC/WS/31966/22/09E
EXAMINATION CHECKLIST
Inspection Details of Lifting Gear Webbing Sling
Status : S = Satisfactory X = Deficiency R = Recommendation N = Not Applicable
Sr. No. Inspection Item Status Sr.No. Inspection Item Status
1 Previous Inspection Records N 7 Chaffing S
2 Manufacturer ID Tag S 8 Metal End Fittings (If Any) N
3 General Condition S 9 Width and Thickness of Webbing S
4 Cuts S 10 Elongation in length S
5 Chemical Attacks S 11 Eyes S
6 Heat Damages S 12 Stitching S
Remarks
Satisfactory at the time of inspection.
This Certificate Becomes Invalid, If Any Alteration/Repair /Modification Is Made.
THIS IS TO INFORM YOU: that the undersigned a surveyor or representative did attend to examine this machine (equipment)
to assure that it is in safe working condition. Examination indicate that the said equipment has no indigenous defects or sighted
deformation and in safe working condition. The said equipment is found to be satisfactory for further use, provided there is
continues maintenance applied and qualified operators employed. The inspection certificate shall not be reproduced except in full
without the approval of inspection body and client.
This certificate is granted subject to the condition that is agreed & understood. Master Safety Consultancy L.L.C liability shall be
limited to the acts or premises of its employees, subcontractors. Under no circumstances whatsoever shall Master Safety
Consultancy L.L.C be liable for any injury or damage to any person or occurring by reason of negligent operation or any defect in
materials, machinery, equipment or other items other than such defects ascertainable normally.
We hereby report that the all particulars in this report are correct at the time of test/inspection Daily inspection & operational
maintenance is the sole responsibility of the users.
Inspected By : M FARHAN
Position : Inspection Engineer
Doc. No. QF-07/03-09 Rev. No. : 02 Issue Date: 01-05-2020
