Scribd
Upload
36 views1 page

Plumbness Report

The document provides a dimensional control report for the plumbness of the 4th shell course of a tank. It details the planned measurements of plates 1-21 and spaces for recorded measurements and differences. The maximum allowed tolerance in verticality for shell course #4 is given as 50mm. Notes provide context on the measurement process and tools used.

Uploaded by

ghaithalibiga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
36 views1 page

Plumbness Report

The document provides a dimensional control report for the plumbness of the 4th shell course of a tank. It details the planned measurements of plates 1-21 and spaces for recorded measurements and differences. The maximum allowed tolerance in verticality for shell course #4 is given as 50mm. Notes provide context on the measurement process and tools used.

Uploaded by

ghaithalibiga
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Dimensional control report

plumbness
PROJECT LOCATION SUBJECT N° SEQUENTIAL REPORT N° DATE PROJECT NO.:

TK-01 DIMENSIONAL CHECK 4 rd SHELL COURSE 3 11/19/2023 1424

N° SPEC / DRAWING / CODE: API 650 / 7.5.2 EXAMINATION OF: PLUMBNESS SHELL COURSE No.04 WORK CATEGORY : MECHANICAL

TOP OF SHELL 4

DOWN OF SHELL 1

DATE / TIME : 19/11/2023 AT 3h30

PLATE PLATE NOS 1 PLATE NOS 2 PLATE NOS 3 PLATE NOS 4 PLATE NOS 5 PLATE NOS 6 PLATE NOS 7 PLATE NOS 8 PLATE NOS 9 PLATE NOS 10 PLATE NOS 11

DEVICE LENGTH (mm) 100 100 100 100 100 100 100 100 100 100 100

READED LENGTH (mm)

DIFFERENCES

RESULTS

DATE / TIME : 19/11/2023 AT 3h30

PLATE PLATE NOS 12 PLATE NOS 13 PLATE NOS 14 PLATE NOS 15 PLATE NOS 16 PLATE NOS 17 PLATE NOS 18 PLATE NOS 19 PLATE NOS 20 PLATE NOS 21

DEVICE LENGTH (mm) 100 100 100 100 100 100 100 100 100 100

READED LENGTH (mm)

DIFFERENCES

RESULTS
REMARQUES : Accepted: ACC Rejected: R
Height of the Two shell course are 10 M
Maximum tolerance in verticality for shell course nos #4 : h/200 = 50 mm

NOTES:
-The mesurments were taken after welding all the vertical and horizontal joints
-Tools: meter / plumb line / 100 mm device

Name :

signature:

Date :

You might also like