Disclaimer

Our policy is one of continuous development. Accordingly the design of our products may change at any time.
Whilst every effort is made to produce up to date literature, this document should only be regarded as a guide
and is intended for information purposes only.
Its contents do not constitute an offer for sale or advice on the application of any product referred to in it. We
cannot be held responsible for any reliance on any decisions taken on its contents without specific advice.

Page 1 of 5 740927843.xls 04/02/2024

 CORTEC

To enable only current variants to be offered, please specify ACTUAL or REQUIRED delivery date here
Format = dd/mm/yy (where d=day, m=month, y=year)
OPTION INTERACTIVE CORTEC 1 2 3-4 5 6 7 8 9 10 11 12-13 14 15
SELECTION Generic Application - Protection and control P 7 41 1 1 1 A 1 M 0 51 0 K
Application - Busbar Protection 1
Design Suffix "B" hardware B

B "K" hardware K
K
Software No Ethernet or 2nd rear port option 33
Additional Ethernet Option available 40
33 Additional Ethernet or 2nd rear port option available 41
40 Additional Ethernet or 2nd rear port option available 42
41 Redundant Ethernet options available 51
42
Settings Files Default 0
51
Customer Specific A
0
A Central Networks Version 5
5 Aux Rating
Vx 24 - 48Vdc 1
48 - 110Vdc (40 - 100Vac) 2
1
2 110 - 250Vdc (100 - 240Vac) 3
3
Communication Boards 1 communication board (4 peripheral units) 1
2 communication boards (8 peripheral units) 2
1 3 communication boards (12 peripheral units) 3
2 4 communication boards (16 peripheral units) 4
3 5 communication boards (20 peripheral units) 5
4 6 communication boards (24 peripheral units) 6
5 7 communication boards (28 peripheral units) 7
Hardware options Standard - None 1
6 IRIG-B Only (modulated) 2
17 IRIG-B (Demodulated) C
2 Ethernet (100Mbps) 6
C Ethernet (100Mhz) plus IRIG-B (Modulated) A
Ethernet (100Mhz) plus IRIG-B (De-modulated) B
6 2nd Rear Port & intermicom E
A 2nd Rear Port & intermicom & IRIG-B (modulated) F
B Redundant Ethernet Self-Healing Ring, 2 multi-mode fibre ports + Modulated IRIG-B G
E Redundant Ethernet Self-Healing Ring, 2 multi-mode fibre ports + Un-modulated IRIG-B
Redundant Ethernet RSTP, 2 multi-mode fibre ports + Modulated IRIG-B
H
J
F Redundant Ethernet RSTP, 2 multi-mode fibre ports + Un-modulated IRIG-B K
G Redundant Ethernet Dual-Homing Star, 2 multi-mode fibre ports + Modulated IRIG-B L
H Redundant Ethernet Dual-Homing Star, 2 multi-mode fibre ports + Un-modulated IRIG- M
Fixed A
J
Protocol Options
K
Courier (K-Bus) 1
L
1 IEC60870-5-103 via KITZ274 (Supplied as Courier. KITZ274 to be ordered) 1
M
1

Livery Date dependent M

Language Multilingual - English, French, German, Spanish 0

0 Multilingual - English, French, German, Russian 5

5

Page 2 740927843.xls 04/02/2024

 Documents

P741111A1M0510K MASTER

External Connection Diagram : 10P74101

Communications Connections Diagram : 10Px4001
Outline Diagram : GN0086

ROUTING
Test Instruction : 50300.3240.006

A Original - 12/02/2002
B Test Instruction was Z7P741 - 21/03/2005
C Communications Connections Diagram added - 20/04/06

Page 3 740927843.xls 04/02/2024

 Master Text

P741111A1M0510K
Bus Bar Protection
Features :
Central Unit
Vx Nominal a
24 - 48Vdc
Mounting op
Flush Panel
Communicati
1 communication board (4 peripheral units)
Hardware op
Standard - None
Protocol opt
Courier (K-Bus)
Language:
Multilingual - English, French, German, Spanish
Software Version:
51
Settings files :
Default

A Original - 10/02/2002
B In & Vn added - 01/07/2002
C Protocol Options Added - 03/09/2002
D Protocol Options Removed - 04/10/2002
E 2070583 Assy Power Supply added - 28/10/2002
F P74 User Guide CD remvoed from BOM - 04/02/2003
G References to In & Vn removed - 28/04/03
H Software was "00" - CDN:R3500/111 - 23/07/03
J Software was "10" in error - CDN:R3500/111 - 23/07/03
K K-Bus only protocol on Cortec marked "NOT YET AVAILABLE!" - 03/11/03
L Hardware options were always "IRIG-B" in error - 24/03/04
M GN2037001 now called up when ZN0007001 is not fitted - 20/04/04
8 Communication boards option removed, K-Bus only protocol now available, Software was "01" per H Grasset
N
e-mail - 14/07/04
O Production and shipment held pending Software release. CDN R5156 - 26/08/04
All previous Softwares retrospectively withheld (shown as "**"). Software/Hardware release of "20B"(PCL ref
P A2.1) with Co-processor 2070273 002 issue A/04 & Comms. 2070273 001 issue A/04,Also pre-release notice
of Software/Hardware "30B"(PCL ref A2.1) with Co-processor 2070273 002 issue A/05 & Comms. 2070273
001 issue A/05. CDN R5222 - 12/10/04
Q Software "20" retrospectively corrected to read "02" - 24/10/04
Areva livery default set effective 01/11/04. DC date of Software "03" with Co-Processor, new Power Supply &
R
Comms set for 28/02/05. CDN R5365 - 21/01/05

S
Drop-Down boxes replaced by List boxes & fixed digits clarified in line with publicity documentation - 16/03/05
Re-written to include additional Hardware & Protocol options per J Slater and H Grasset.Effective 01/08/05 -
T
13/07/05
U Protocol IEC61850 was "6" and available until H grasset's e-mail of 27/07/05
V Software version "30" now introduced from 05/09/05 per CDN R5700 - 05/09/05
10 Mbs Ethernet card and Protocol option " None" removed. 100 Mbs noted as "Not yet available!" per e-mail H
W
Grasset 30/09/05 - 02/10/05
DC (Delivery Commencement) date for Version 31 Software with Version K Hardware set as 01/03/06 by
X
telephone with H Grasset- 05/10/05
Retrospective change to Date Drivers entry for 05/09/05 allowing selection of "B" or "J" hardwares with "30" or
Y "31" software until 01/03/06, when choices become "B" or "K" with "31" software per telecon. With H Grasset
12/12/05
Z Language options added to Cortec, Date Drivers & Lookup per H Grasset's e-mail dated 09/01/06 - 11/01/06
Date Drivers amended retrospectively to show Hardware Options as "1" for "None" and as "2" for "IRIG-B
AA
only"per H Grasset's e-mail of 23/01/06 - 26/01/06
Cortec, Date Drivers & Lookup amended to show revised Hardware Options per C Casadoumecq's e-mails of
AB
28/03/06 - 28/03/06
Cortec, Date Drivers,BOM & Lookup amended to show revised Hardware Options per K Preston's "MODEL
AC
LIST INFORMATION …" of April 2006 - 19/04/06
AD Lookup & Cortec amended to show Phases 1 or 2 correctly as "B" & "K" respectively - 07/06/06
AE Correction to Cortec to show Phase 2 correctly as "K" - 08/06/06
AF Correction to replace all hardware options except 1&2 by asterisks 'til available - 06/09/06
AG CID PGRA-6W8GB5 released Phase II model version '32' in anticipation of software version 3.6 - 07/12/06
AH CID CCAS-6ZXJ69 released Phase II model version '33' with software version 3.8 - 06/04/07
AI "Vn=100-120 Vac" text removed from Master Text - 23/07/07
AJ IEC61850, Ethernet options & "40" Software released see CID CCAS-77NHP6 - 04/10/07
AK Master Text corrections - 12/10/07
AL Software version '41' including 2nd rear Comms options released by CID CCAS-7BYDSQ - 20/02/08
AM Software version '42' released by CID CCAS-7DLH75 - 16/04/2008
AN Master text corrected to "Courier (K-Bus) with additional IEC61850" - 16/04/2008
AO Master text lookup corrected on '2nd Rear Port & intermicom & IRIG-B (modulated) option - 16/04/2008
AP Firmware version D2.5 released for Central networks - indicated by '5' in digit 14 CCAS-7LDE47 - 4/12/2008
AQ CID CCAS-857HSZ released redundant ethernet options & '51' software - 19/05/2010
AR References to Alstom, Areva and MiCOM removed - 6/10/2010

Page 4 740927843.xls 04/02/2024

 BOM2

Qty.
PCS MATERIAL MASTER NUMBER DESCRIPTION Position/Ref
Required
P741111A1M0510K
GN0371001 COMMON PARTS 1
ZN0021001 PCB ASSY PX40 PHASE 2 PSU 24/54V A/14 Ref 1 1
2070583001 ASSY PCB - PSU 24/54Vdc Board A/05 Ref 2 1
2070273001 PCB-FIBRE OPTIC COMMS-A/06 Ref 8, SLOT 14 1
GN2037001 Blanking plate Ref 34, SLOTS 1 & 7 - 13 8
ZB4018110 Self tapping screw pan head size 4 X ¼" Ref 60 4
ZB4018215 Self tapping screw pan head size 6 X ¼" Ref 61 16
BLANK BLANK

Page 5 of 5 740927843.xls 04/02/2024