DIE DRAHTWEBER

HAVER PARTICLE ANALYSIS.

PRICELIST VALID FROM AUGUST 2022.

H AVE R & B O EC K ER
 Index Pricelist 2022
Valid for orders as of
Sample Dividers August 01, 2022
HAVER RT Sample Splitters 03
HAVER RPT Rotating Sample Reducers 03

Test Sieves and Accessories

Control of Test Sieves 04
Test Sieves with Frame made from Stainless Steel
Ø 50 mm 05
Ø 76.2 mm (3“) 06
Ø 100 mm 07
Ø 120 mm 08
Ø 150 mm 09
Ø 200 mm 10 - 13
Ø 203 mm (8“) 14 - 17
Ø 200 mm Quality Gold 18
Ø 250 mm 20 - 21
Ø 300 mm (297,5 mm) 22 - 25
Ø 305 mm (12“) 26 - 27
Ø 315 mm 28 - 29
Ø 350 mm 30 - 31
Ø 400 mm 32 - 33
Ø 450 mm (18“) 34 - 35
ALPINE Test Sieves 36 - 38
Test Sieves for Cereals and Tobacco. Grid Sieves 39
Test Sieves with Frame made from Beechwood
300 x 300 mm 40 - 41
500 x 500 mm 42 - 43
Test Sieves with Frame made from Aluminoy
Interchangeable Screens for Ø 400 mm 44 - 45
HAVER USC Test Sieve Cleaners. Drip-off Weight Test Set
for Canned Food. Sieve Holder. Cones made from Metal Wire Cloth 46

Test Sieve Shakers

Control of Test Sieve Shakers 47
HAVER EML 200 Pure, Premium and Premium Remote 48
HAVER EML 315 digital plus 49
HAVER EML 450 digital plus 50
HAVER UWL 400 51
TYLER Test Sieve Shakers (Ro-Tap®) 52
Sound absorbing Cupboards 52
HAVER CSA Evaluation Software 53
HAVER UFA Ultrasonic Sieving Support 53

Dynamic Image Analysis

HAVER CPA 53

Quality assurance „on site“ NEW 54

Terms and Delivery

Germany and Export 55

2 3
Sample Splitters
for dividing sieve material into representative test sieve samples

Samlple Dividers
RT 75 - RT 50 - RT 37.5 - RT 25
made from galvanized sheet steel Article-No. €/Piece
RT 75 (6 divisions, 75 mm - 3“) 205322273 629
RT 50 (8 divisions ,50 mm = 2“) 205322280 642
RT 37.5 (12 divisions, 37.5 mm = 1½“) 205322297 660
RT 25 (16 divisions, 25 mm = 1“) 205322303 660

Component parts
Receiver for RT 75 | RT 50 | RT 37.5 | RT 25 205325021 105 Included in delivery:
Rack for RT 75 | RT 50 | RT 37.5 | RT 25 205325809 126 1 rack made from
Divider 6 divisions, 75 mm = 3“ 205326646 187 galvanized sheet steel
Divider 8 divisions, 50 mm = 2“ 205326578 201 1 divider made from galva-
Divider 16 divisions, 25 mm = 1“ 205326592 218 nized sheet steel
Divider 12 divisions, 37.5 mm = 1½“ 205326585 218 3 receivers with grab
handles (8 l)

RT 12.5 - RT 6.3
made from lacquered sheet steel
Sample Splitter with receivers made from tinned sheet (1.75 l)
RT 12.5 (18 divisions 12.5 mm = ½“) 205322310 327
RT 6.3 (12 divisions 6.3 mm = ¼“) 205322327 327
Sample Splitters with receivers plastic laminated (2 l)
RT 12.5 (18 divisions 12.5 mm = ½“) 205322334 432 Included in delivery:
RT 6.3 (12 divisions 6.3 mm = ¼“) 205322341 432 1 rack made from
lacquered sheet steel
Component parts
1 divider made from
Rack for RT 6.3 | RT 12.5 205325779 102
stainless steel
Receiver made from tinned sheet (1,75L) 205326882 21
Receiver plastic laminated (2,5L) 205326899 57 3 receivers
Divider 18 divisions, 12.5 mm = 1/2“ 205326608 162
Divider 12 divisions, 6.3 mm = 1/4“ 205326622 162
Dust protection for Sample Splitter 206515759 198

HAVER RPT Rotating Sample Reducer

for dividing sieve material into representative test sieve samples

Rotating Sample Reducer Article-No. €/Piece

RPT 1:8 with 230 Volt 205322396 8.172
RPT 1:10 with 230 Volt 205322402 8.229
RPT 1:30 205322419 9.711

HAVER & BOECKER

 Documentation of sieve conformity
Inspection documents according to DIN EN 10204
Compliance Certificate 2.1
If no specific request has been made. each HAVER Test Sieve is delivered with a
Decleration of Certificate according to EN 10 204.

Inspection or Calibration Certificate 3.1

If desired HAVER Test Sieves may be delivered with an Inspection Certificate 3.1
according to EN 10 204 with measuring results of a specific inspection. It can be
carried out as an inspection or calibration service according to ISO 3310 or ASTM E11. The test sieves have to be
cleaned by the customer.
A calibration service requires to measure up to three times as many aperture widths The test sieves have to be
compared to an inspection service. free from any contamina-
tions. Otherwise. we may
Certification of new test sieves of metal wire cloth or perforated plates have to charge additional
costs or the sieves can not
Diameter ≤ 203 mm ≤ 315 mm ≤ 450 mm
be measured.
Article-No. 206696946 206696861 206696960
EURO/piece 34.00 61.00 89.00 When sending in used test
sieves please submit a dec-
Calibration of new test sieves of metal wire cloth or perforated plates laration of no objection.
Diameter ≤ 203 mm ≤ 315 mm ≤ 450 mm
Article-No. 206697059 206697035 206697042
EURO/Spiece 67.00 147.00 263.00

Certification of used test sieves of metal wire cloth or perforated plates

Prices as above plus operating expense 180.00€ / order

Certification and Calibration of test sieves through our

„on-site“ service see page 54

HAVER calibration laboratory

Accredited calibration laboratory for test sieves of metal wire cloth according to
DIN EN ISO / IEC 17025.

Accreditation was carried out by the „Deutsche Akkreditierungsstelle GmbH“

(German Accreditation Office - DakkS). The calibration will be performed in accordance
to ISO 3310-1.

Accredited calibration of new test sieves of metal wire cloth in our calibration
laboratory in Oelde

Diameter ≤ 203 mm ≤ 315 mm ≤ 450 mm

Article-No. 206697271 206697301 206697318
EURO/Spiece 68.00 151.00 270.00

Accredited calibration of used test sieves of metal wire cloth in our calibration
laboratory in Oelde

Prices on request plus operating expense 200.00€ / order

4 5
HAVER Test Sieves with Frame made from Stainless Steel Ø 50 mm
↕ 25 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

4 206157041 104 206157058 104

2.8 206157072 104 206157089 104
2.5 206161055 104
2.36 206161079 104 206161086 104
2.24 206161109 104
2 206157102 104 206157119 104 With Serial Number and

Test Sieves
1.8 206161123 104 Certificate of Compliance
1.7 206161147 104 206161154 104 with the Order 2.1
1.6 206161192 104 EN 10204.
1.4 206157133 104 206157140 104
1.25 206159205 104
1.18 206161215 104 206161222 104
1.12 206161246 104
1 206157164 104 206157171 104
w / µm
900 206161260 104
With Inspection Certificate
850 206161284 104 206161291 104
800 206161338 104 3.1 according to DIN
710 206157195 104 206157201 104 EN 10 204 on request:
630 206161352 104
600 206161376 104 206161383 104 Certification
560 206161406 104 (DIN EN 10204)
500 206157225 104 206157232 104 Article-No. 206696946
450 206161420 104 EURO / piece: 34,00
425 206161444 104 206161451 104
400 206147738 104
Calibration
355 206157256 104 206157263 104
315 206161475 104 (DIN EN 10204)
300 206161499 104 206161505 104 Article No. 206697059
280 206161529 104 EURO / piece 67,00
250 206157300 104 206157317 104
224 206161543 104
212 206161567 104 206161574 104
200 206161598 104 With Calibration
180 206157331 104 206157348 104
Certificate according to
160 206161611 104
150 206157645 104 206157652 104 DIN EN ISO / IEC 17025
140 206161635 104 Article No. 206697271
125 206157362 104 206157379 104 EURO / piece 68,00
112 206161673 104
106 206161697 104 206161703 104
100 206147691 104
90 206157393 104 206157409 104
80 206147837 104
75 206161727 104 206161734 104
71 206161758 104
63 206147806 121 206147813 121
56 206161772 121
53 206161796 121 206161802 121
50 206147752 121
45 206147660 123 206147677 123
40 206161826 125
38 206161840 148 206161857 148
36 206161871 148
32 206147776 178 206147783 178
25 206149978 204 206762412 204
20 206149947 373 206149954 373

Accessories
Sieve cover 206161499 57
Sieve pan 205922466 57

HAVER & BOECKER

HAVER Test Sieves with Frame made from Stainless Steel Ø 76.2 mm = 3‘‘
↕ 25 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

2.5 206136084 165

2.36 206174451 165 206174468 165
2.24 206136091 165
2 206136107 165 206136114 165
1.8 206136121 165
1.7 206174680 165 206174697 165 With Serial Number and
1.6 206136138 165 Certificate of Compliance
1.4 206174666 165 206174673 165 with the Order 2.1
1.25 206136145 165 EN 10204.
1.18 206174642 165 206174659 165
1.12 206136152 165
1 206136169 165 206136176 165
w / µm
900 206136183 165
850 206174802 165 206174819 165
800 206136190 165
710 206174703 165 206174710 165 With Inspection Certificate
630 206174499 165 3.1 according to DIN
600 206174864 165 206174871 165 EN 10 204 on request:
560 206136206 165
500 206174840 165 206174857 165 Certification
450 206136213 165 (DIN EN 10204)
425 206174826 165 206174833 165 Article-No. 206696946
400 206174444 165 EURO / piece: 34,00
355 206174789 165 206174796 165
315 206174437 165
300 206174765 165 206174772 165 Calibration
280 206136220 165 (DIN EN 10204)
250 206174741 165 206174758 165 Article No. 206697059
224 206136251 165 EURO / piece 67,00
212 206136268 165 206136275 165
200 206136282 165
180 206174727 165 206174734 165
160 206136299 165 With Calibration
150 206136305 165 206136312 165
Certificate according to
140 206136329 165
125 206174543 165 206174550 165 DIN EN ISO / IEC 17025
112 206136336 165 Article No. 206697271
106 206174567 165 206174574 165 EURO / piece 68,00
100 206174529 165
90 206174581 165 206174598 165
80 206174154 165
75 206136350 165 206136367 165
71 206134783 165
63 206174604 173 206174611 173
56 206136374 175
53 206174628 180 206174635 180
50 206174536 185
45 206136381 191 206136398 191
40 206136404 191
38 206136411 243 206136428 243
36 206174147 243
32 206136435 260 206136442 260
25 206174123 359 206174130 359
20 206174505 651 206174512 651

Accessories
Sieve cover 205922190 83
Sieve pan 205922480 61

6 7
HAVER Test Sieves with Frame made from Stainless Steel Ø 100 mm
↕ 45 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

2.5 206142306 121

2.36 206142399 121 206142405 121
2.24 206142450 121
2 206142054 121 206142061 121
1.8 206142474 121
1.7 206141859 121 206141866 121 With Serial Number and

Test Sieves
1.6 206142283 121 Certificate of Compliance
1.4 206142498 121 206142504 121 with the Order 2.1
1.25 206142528 121 EN 10204.
1.18 206141880 121 206141897 121
1.12 206142566 121
1 206141828 121 206141835 121
w / µm
900 206142580 121
850 206141910 118 206141927 118
800 206141521 118
With Inspection Certificate
710 206142603 118 206142610 118
630 206142634 118 3.1 according to DIN
600 206141941 118 206141958 118 EN 10 204 on request:
560 206142658 118
500 206142085 118 206142092 118 Certification
450 206142672 118 (DIN EN 10204)
425 206141972 118 206141989 118 Article-No. 206696946
400 206142344 118 EURO / piece: 34,00
355 206142696 118 206142702 118
315 206142368 118
Calibration
300 206142023 118 206142030 118
280 206142726 118 (DIN EN 10204)
250 206141781 118 206141798 118 Article No. 206697059
224 206142740 118 EURO / piece 67,00
212 206142764 118 206142771 118
200 206141576 118
180 206142795 118 206142801 118
160 206142320 118 With Calibration
150 206142191 118 206142207 118 Certificate according to
140 206142825 118
DIN EN ISO / IEC 17025
125 206141705 118 206141712 118
112 206142849 118 Article No. 206697271
106 206142863 118 206142870 118 EURO / piece 68,00
100 206141682 118
90 206142252 118 206142269 118
80 206142894 118
75 206141651 118 206141668 118
71 206142917 118
63 206141620 121 206141637 121
56 206142948 124
53 206142160 127 206142177 127
50 206142146 131
45 206141545 151 206141552 151
40 206141606 154
38 206142221 220 206142238 220
36 206142962 226
32 206142115 237 206142122 237
25 206142986 361 206142993 361
20 206141736 674 206141743 674

Accessories
Sieve cover 205922206 87
Sieve pan 205922503 70
Sealing ring PVC 205921841 1
Rubber ball 201446515 1
Rubber cube 205332425 1

HAVER & BOECKER

HAVER Test Sieves with Frame made from Stainless Steel Ø 120 mm
↕ 40 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

2.5 206144430 136

2.36 206157737 136 206648884 136
2.24 206144454 136
2 206144478 136 206648471 136
1.8 206144492 136
1.7 206154804 136 206648853 136 With Serial Number and
1.6 206158154 136 Certificate of Compliance
1.4 206144539 136 206648488 136 with the Order 2.1
1.25 206144553 136 EN 10204.
1.18 206154781 136 206648846 136
1.12 206157485 136
1 206144577 136 206648495 136
w / µm
900 206157461 132
850 206158178 132 206648983 132
800 206144591 132
710 206144720 132 206648518 132 With Inspection Certificate
630 206144614 132 3.1 according to DIN
600 206147400 132 206648594 132 EN 10 204 on request:
560 206157751 132
500 206144645 132 206648501 132 Certification
450 206157782 132 (DIN EN 10204)
425 206144980 132 206648556 132 Article-No. 206696946
400 206144669 132 EURO / piece: 34,00
355 206144942 132 206648549 132
315 206144683 132
Calibration
300 206147387 132 206648587 132
280 206145031 132 (DIN EN 10204)
250 206157805 132 206648891 132 Article No. 206697059
224 206157829 132 EURO / piece 67,00
212 206144928 132 206648532 132
200 206144706 132
180 206144904 132 206648525 132
160 206147363 132 With Calibration
150 206145017 132 206648570 132 Certificate according to
140 206157843 132
DIN EN ISO / IEC 17025
125 206158192 132 206648990 132
112 206157867 132 Article No. 206697271
106 206157881 132 206648907 132 EURO / piece 68,00
100 206157706 132
90 206157447 132 206648877 132
80 206157911 132
75 206157935 132 206648914 132
71 206157959 132
63 206147615 136 206648600 136
56 206157973 138
53 206157997 144 206648921 144
50 206157423 148
45 206158017 173 206648938 173
40 206158031 180
38 206158055 232 206648945 232
36 206158079 241
32 206158093 260 206648952 260
25 206158116 434 206648969 434
20 206158130 728 206648976 728

Accessories
Sieve cover 205922213 101
Sieve pan 205922527 82

8 9
HAVER Test Sieves with Frame made from Stainless Steel Ø 150 mm
↕ 50 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

2.5 206143013 136

2.36 206143037 136 206143044 136
2.24 206143068 136
2 206143099 136 206143105 136
1.8 206143129 136
1.7 206143143 136 206143150 136 With Serial Number and

Test Sieves
1.6 206143174 136 Certificate of Compliance
1.4 206143198 136 206143204 136 with the Order 2.1
1.25 206168481 136 EN 10204.
1.18 206143228 136 206143235 136
1.12 206143273 136
1 206143297 136 206143303 136
w / µm
900 206143327 132
850 206143341 132 206143358 132
800 206143372 132
710 206143396 132 206143402 132 With Inspection Certificate
630 206143433 132 3.1 according to DIN
600 206143457 132 206143464 132 EN 10 204 on request:
560 206143488 132
500 206143501 132 206143518 132 Certification
450 206143532 132 (DIN EN 10204)
425 206143556 132 206143563 132 Article-No. 206696946
400 206143587 132 EURO / piece: 34,00
355 206143600 132 206143617 132
315 206143631 132
Calibration
300 206143655 132 206143662 132
280 206143686 132 (DIN EN 10204)
250 206143709 132 206143716 132 Article No. 206697059
224 206143730 132 EURO / piece 67,00
212 206143754 132 206143761 132
200 206143785 132
180 206143808 132 206143815 132
160 206143846 132 With Calibration
150 206143860 132 206143877 132 Certificate according to
140 206143891 132
DIN EN ISO / IEC 17025
125 206143914 132 206143921 132
112 206143945 132 Article No. 206697271
106 206143969 132 206143976 132 EURO / piece 68,00
100 206144010 132
90 206144034 132 206144041 132
80 206142436 132
75 206144065 132 206144072 132
71 206144096 132
63 206144119 136 206144126 136
56 206144140 138
53 206144164 144 206144171 144
50 206144201 148
45 206144225 173 206144232 173
40 206144256 180
38 206144270 232 206144287 232
36 206144300 241
32 206144324 260 206144331 260
25 206144355 434 206144362 434
20 206144386 728 206144393 728

Accessories
Sieve cover 205922220 101
Sieve pan 205922541 82
Sealing ring PVC 205921865 1
Rubber ball 201446515 1
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 200 mm
↕ 32 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Artice-No. €/Piece Article-No. €/Piece Article-No. €/Piece

22.4 206136480 137

20 206136497 137
19 206136510 137 With Serial Number and
18 206136527 137 Certificate of Compliance
16 206169518 137 with the Order 2.1
15 EN 10204.
14 206136534 137
13.2 206136541 137
12.5 206169501 137
11.2 206169365 120 206169372 120 206169334 137
10 206152282 114 206169051 137
9.5 206160300 114 206160317 114 206136558 137
9 206169358 114 206169044 137
With Inspection Certificate
8 206153708 114 206153715 114 206169327 137
3.1 according to DIN
7.1 206154101 114 206136565 137
6.7 206169563 114 206169570 114 206136589 137 EN 10 204 on request:
6.3 206153456 114 206153463 114 206169495 137
5.6 206154828 114 206154835 114 206169037 137 Certification
5 206152206 114 206649379 137 (DIN EN 10204)
4.75 206157003 114 206157010 114 206136602 137 Article-No. 206696946
4.5 206154644 114 206141132 137 EURO / piece: 34,00
4 206153807 114 206153814 114 206169488 137
3.55 206154842 114 Calibration
3.35 206157027 114 206157034 114 (DIN EN 10204)
3.15 206153852 114 Article No. 206697059
2.8 206154040 114 206154057 114 EURO / piece 67,00
2.5 206153982 97
2.36 206157287 97 206157294 97
2.24 206151971 97
2 206151896 97 206151902 97
1.8 206157577 97 With Calibration
1.7 206157539 97 206157546 97 Certificate according to
1.6 206153340 97 DIN EN ISO / IEC 17025
1.4 206151827 97 206151834 97 Article No. 206697271
1.25 206153234 97 EURO / piece 68,00
1.18 206157508 97 206157515 97
1.12 206169389 97
1 206151650 97 206151667 97

Note:
Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

10 11
HAVER Test Sieves with Frame made from Stainless Steel Ø 200 mm
↕ 32 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206169396 96
850 206161925 96 206161932 96
800 206151582 96
710 206151483 96 206151490 96
630 206152961 96
With Serial Number and

Test Sieves
600 206161659 96 206161666 96
560 206160249 96 Certificate of Compliance
500 206151384 96 206151391 96 with the Order 2.1
450 206149862 96 EN 10204.
425 206161314 96 206161321 96
400 206152855 96
355 206151131 96 206151148 96
315 206152732 96
300 206155597 96 206155603 96
280 206151032 96
250 206150929 96 206150936 96
With Inspection Certificate
224 206157775 96
3.1 according to DIN
212 206156136 96 206156143 96
200 206150653 96 EN 10 204 on request:
180 206150554 96 206150561 96
160 206150493 96 Certification
150 206161178 96 206161185 96 (DIN EN 10204)
140 206154446 96 Article-No. 206696946
125 206150424 96 206150431 96 EURO / piece: 34,00
112 206150417 96
106 206161031 96 206161048 96 Calibration
100 206150387 96 (DIN EN 10204)
90 206150141 96 206150158 96 Article No. 206697059
80 206150097 96 EURO / piece 67,00
75 206160973 96 206160980 96
71 206154347 96
63 206150073 96 206150080 96
56 206157720 106
53 206160911 106 206160928 106 With Calibration
50 206150066 106 Certificate according to
45 206152602 129 206152619 129 DIN EN ISO / IEC 17025
40 206150059 129 Article No. 206697271
38 206162007 188 206162014 188 EURO / piece 68,00
36 206154545 188
32 206150028 195 206150035 195
25 206150004 334 206150011 334
20 206149916 613 206149923 613

Accessories
Sieve cover 205922237 58
Sieve pan 205922565 77
Intermediate pan 205923692 83
Intermediate ring 205923883 50
Additional pasted seam top Ø 200-203 mm* 205922121 12
Additional pasted seam bottom Ø 200-203 mm* 205922138 12
Sealing ring PVC 205921872 1
Sealing ring VITON 205921957 7
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 200 mm
↕ 50 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206168207 127 206168214 127 206169556 142

112 206136732 127 206136619 142
106 206168184 127 206168191 127 206136626 142 With Serial Number and
100 206160812 127 206160829 127 206136657 142 Certificate of Compliance
90 206166524 127 206166531 127 206169532 142 with the Order 2.1
80 206148605 127 206136664 142 EN 10204.
75 206149305 127 206149312 127 206136671 142
71 206136596 127 206136688 142
63 206148346 127 206148353 127 206169112 142
56 206148698 127 206169310 142
53 206168160 127 206168177 127 206136695 142
50 206148230 127 206148247 127 206169587 142
45 206148148 127 206148155 127 206169303 142
With Inspection Certificate
40 206147912 127 206169471 142
37.5 206149596 127 206149602 127 206169549 142 3.1 according to DIN
35.5 206147899 127 206169297 142 EN 10 204 on request:
31.5 206147875 127 206147882 127 206169105 137
28 206147851 127 206169235 137 Certification
26.5 206168146 127 206168153 127 206136701 137 (DIN EN 10204)
25 206147714 127 206147721 127 206169228 137 Article-No. 206696946
22.4 206147646 127 206147653 127 206169211 137 EURO / piece: 34,00
20 206147639 120 206169129 137
19 206149657 120 206149664 120 206169259 137 Calibration
18 206147585 120 206169204 137 (DIN EN 10204)
16 206147561 120 206147578 120 206169099 137 Article No. 206697059
14 206147554 120 206169198 137 EURO / piece 67,00
13.2 206166562 120 206166579 120 206136718 137
12.5 206147530 120 206147547 120 206169181 137
11.2 206147493 120 206147509 120 206169174 137
10 206147486 114 206169167 137
9.5 206166586 114 206166593 114 206174482 137 With Calibration
9 206147479 114 206169136 137 Certificate according to
8 206147349 114 206147356 114 206169075 137 DIN EN ISO / IEC 17025
7.1 206147318 114 206169280 137 Article No. 206697271
6.7 206166548 114 206166555 114 206136725 137 EURO / piece 68,00
6.3 206147240 114 206147257 114 206169273 137
5.6 206147172 114 206147189 114 206169150 137
5 206147011 114 206169266 137
4.75 206166074 114 206166081 114 206136763 137
4.5 206146953 114 206169143 137
4 206146885 114 206146892 114 206169068 137
3.55 206146663 114
3.35 206165930 114 206165947 114
3.15 206146571 114
2.8 206146489 114 206146496 114
2.5 206146366 97
2.36 206166463 97 206166470 97
2.24 206146113 97
2 206146007 97 206146014 97
1.8 206145901 97
1.7 206165626 97 206165633 97
1.6 206145642 97
1.4 206145543 97 206145550 97
1.25 206145437 97
1.18 206165602 97 206165619 97
1.12 206145178 97 Note:
1 206145109 97 206145116 97 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

12 13
HAVER Test Sieves with Frame made from Stainless Steel Ø 200 mm
↕ 50 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206145079 96
850 206165589 96 206165596 96
800 206145000 96
710 206144966 96 206144973 96
630 206144874 96
With Serial Number and

Test Sieves
600 206165473 96 206165480 96
560 206144867 96 Certificate of Compliance
500 206144829 96 206144836 96 with the Order 2.1
450 206144744 96 EN 10204.
425 206165343 96 206165350 96
400 206144638 96
355 206144515 96 206144522 96
315 206144416 96
300 206165176 96 206165183 96
280 206144195 96
250 206143990 96 206144003 96
With Inspection Certificate
224 206143839 96
3.1 according to DIN
212 206164957 96 206164964 96
200 206143426 96 EN 10 204 on request:
180 206143259 96 206143266 96
160 206143082 96 Certification
150 206164667 96 206164674 96 (DIN EN 10204)
140 206142931 96 Article-No. 206696946
125 206142542 96 206142559 96 EURO / piece: 34,00
112 206142429 96
106 206164520 96 206164537 96 Calibration
100 206142382 96 (DIN EN 10204)
90 206142009 96 206142016 96 Article No. 206697059
80 206141811 96 EURO / piece 67,00
75 206164469 96 206164476 96
71 206141590 96
63 206141453 96 206141460 96
56 206141422 106
53 206164353 106 206164360 106 With Calibration
50 206141415 106 Certificate according to
45 206141330 129 206141347 129 DIN EN ISO / IEC 17025
40 206141309 129 Article No. 206697271
38 206164315 188 206164322 188 EURO / piece 68,00
36 206141262 188
32 206141163 195 206141170 195
25 206141095 334 206141101 310
20 206140845 613 206140852 613

Accessories
Sieve cover 205922237 58
Sieve pan 205922589 47
Sieve pan with discharge nozzle for wet sieving 205922824 170
Intermediate pan 205923715 83
Deaeration ring 200x50 mm 205922046 103
Intermediate ring 205923876 50
Additional pasted seam top Ø 200-203 mm* 205922121 12
Additional pasted seam bottom Ø 200-203 mm* 205922138 12
Sealing ring PVC 205921872 1
Sealing ring VITON 205921957 7
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 203 mm = 8‘‘
↕ 32 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

11.2 206136824 120 206136831 120

10 206169648 114
9.5 206168641 114 206168658 114
9 206136848 114
8 206168559 114 206168566 114
7.1 206136855 114 With Serial Number and
6.7 206168573 114 206168580 114 Certificate of Compliance
6.3 206136862 114 206136879 114 with the Order 2.1
5.6 206168412 114 206168429 114 EN 10204.
5 206169785 114
4.75 206167255 114 206167262 114
4.5 206136886 114
4 206169624 114 206169631 114
3.55 206136893 114
3.35 206167279 114 206167286 114
3.15 206169792 114
With Inspection Certificate
2.8 206167620 114 206167637 114
3.1 according to DIN
2.5 206168405 97
2.36 206167293 97 206167309 97 EN 10 204 on request:
2.24 206136916 97
2 206169808 97 206169815 97 Certification
1.8 206168399 97 (DIN EN 10204)
1.7 206167316 97 206167323 97 Article-No. 206696946
1.6 206169822 97 EURO / piece: 34,00
1.5 206168665 85
1.4 206168375 97 206168382 97 Calibration
1.25 206168368 97 (DIN EN 10204)
1.18 206167330 97 206167347 97 Article No. 206697059
1.12 206136923 97 EURO / piece 67,00
1 206169761 97 206169778 97

With Calibration
Certificate according to
DIN EN ISO / IEC 17025
Article No. 206697271
EURO / piece 68,00

Note:
Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

14 15
HAVER Test Sieves with Frame made from Stainless Steel Ø 203 mm = 8‘‘
↕ 32 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206136930 96
850 206167354 96 206167361 96
800 206168351 96
710 206168337 96 206168344 96
630 206168320 96
With Serial Number and

Test Sieves
600 206167378 96 206167385 96
560 206168597 96 Certificate of Compliance
500 206169747 96 206169754 96 with the Order 2.1
450 206134820 96 EN 10204.
425 206167392 96 206167408 96
400 206168306 96
355 206167576 96 206167583 96
315 206169730 96
300 206167415 96 206167422 96
280 206136947 96
250 206168276 96 206168283 96
With Inspection Certificate
224 206136954 96
3.1 according to DIN
212 206167439 96 206167446 96
200 206169723 96 EN 10 204 on request:
180 206167552 96 206167569 96
160 206167668 96 Certification
150 206167453 96 206167460 96 (DIN EN 10204)
140 206136961 96 Article-No. 206696946
125 206169709 96 206169716 96 EURO / piece: 34,00
112 206136978 96
106 206167477 96 206167484 96 Calibration
100 206168269 96 (DIN EN 10204)
90 206169686 96 206169693 96 Article No. 206697059
80 206136992 96 EURO / piece 67,00
75 206167538 96 206167545 96
71 206137005 96
63 206168245 96 206168252 96
56 206137012 106
53 206167514 106 206167521 106 With Calibration
50 206168436 106 Certificate according to
45 206167491 129 206167507 129 DIN EN ISO / IEC 17025
40 206137029 129 Article No. 206697271
38 206167590 188 206167606 188 EURO / piece 68,00
36 206137036 188
32 206137043 195 206137050 195
25 206168443 334 206168450 334
20 206137081 613 206137098 613

Accessories
Sieve cover 205922244 58
Sieve pan 205922602 77
Intermediate pan 205923739 83
Intermediate ring 205924064 50
Additional pasted seam top Ø 200-203 mm* 205922121 12
Additional pasted seam bottom Ø 200-203 mm* 205922138 12
Sealing ring PVC 205921872 1
Sealing ring VITON 205921957 7
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 203 mm = 8‘‘
↕ 50 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206136749 127 206136756 127

112 206137104 127
106 206137111 127 206137128 127 With Serial Number and
100 206137135 127 206137142 127 Certificate of Compliance
90 206137166 127 206137173 127 with the Order 2.1
80 206137180 127 EN 10204.
75 206137197 127 206137203 127
71 206137593 127
63 206137210 127 206137227 127
56 206137234 127
53 206137241 127 206137258 127
50 206137265 127 206137272 127
45 206168221 127 206168238 127
40 206137289 127
37.5 206137296 127 206137302 127
35.5 206137319 127
31.5 206163639 127 206163646 127
28 206162373 127 With Inspection Certificate
26.5 206137326 127 206137333 127 3.1 according to DIN
25 206164001 127 206164018 127 EN 10 204 on request:
22.4 206163196 127 206163202 127 206169457 137
20 206168467 120 206137487 137 Certification
19 206163745 120 206163752 120 206762535 137 (DIN EN 10204)
18 206137340 120 206137494 137 Article-No. 206696946
16 206167071 120 206167088 120 206169440 137 EURO / piece: 34,00
14 206140784 120 206137500 137
13.2 206137357 120 206137364 120 206762443 137
Calibration
12.5 206168122 120 206168139 120 206137524 137
11.2 206163134 120 206163141 120 206169426 137 (DIN EN 10204)
10 206167095 114 206137531 137 Article No. 206697059
9.5 206168108 114 206168115 114 206648259 137 EURO / piece 67,00
9 206167651 114 206137548 137
8 206168061 114 206168078 114 206137555 137
7.1 206167644 114 206137562 137
6.7 206167101 114 206167118 114 206648266 137 With Calibration
6.3 206167750 114 206167767 114 206648273 137 Certificate according to
5.6 206167125 114 206167132 114 206137579 137 DIN EN ISO / IEC 17025
5 206167194 114 206169464 137 Article No. 206697271
4.75 206167149 114 206167156 114 206648280 137
EURO / piece 68,00
4.5 206137388 114 206137586 137
4 206168030 114 206168047 114 206169433 137
3.55 206168733 114
3.35 206166609 114 206166616 114
3.15 206167972 114
2.8 206166630 114 206166647 114
2.5 206168542 97
2.36 206166661 97 206166678 97
2.24 206137395 97
2 206167729 97 206167736 97
1.8 206168535 97
1.7 206166685 97 206166692 97
1.6 206168023 97
1.4 206166715 97 206166722 97
1.25 206168528 97
1.18 206166746 97 206166753 97
1.12 206137401 97 Note:
1 206167705 97 206167712 97 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

16 17
HAVER Test Sieves with Frame made from Stainless Steel Ø 203 mm = 8‘‘
↕ 50 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206137418 96
850 206167040 96 206167057 96
800 206167965 96
710 206166777 96 206166784 96
630 206167958 96
With Serial Number and

Test Sieves
600 206167019 96 206167026 96
560 206168504 96 Certificate of Compliance
500 206167828 96 206167835 96 with the Order 2.1
450 206137425 96 EN 10204.
425 206166982 96 206166999 96
400 206167880 96
355 206166791 96 206166807 96
315 206167873 96
300 206166821 96 206166838 96
280 206150486 96
250 206167798 96 206167804 96
224 206137432 96
212 206166852 96 206166869 96
200 206167866 96
180 206167897 96 206167903 96
160 206167859 96 With Inspection Certificate
150 206166876 96 206166883 96 3.1 according to DIN
140 206137463 96 EN 10 204 on request:
125 206167774 96 206167781 96
112 206137470 96 Certification
106 206166906 96 206166913 96 (DIN EN 10204)
100 206167675 96 Article-No. 206696946
90 206167682 96 206167699 96 EURO / piece: 34,00
80 206167613 96
75 206166920 96 206166937 96
Calibration
71 206168085 96
(DIN EN 10204)
63 206167927 96 206167934 96
56 206168092 106 Article No. 206697059
53 206166944 106 206166951 106 EURO / piece 67,00
50 206167989 106
45 206167996 129 206168009 129
40 206167224 129
38 206166968 188 206166975 188 With Calibration
36 206168474 188 Certificate according to
32 206167170 195 206167187 195 DIN EN ISO / IEC 17025
25 206167200 334 206167217 334 Article No. 206697271
20 206167231 613 206167248 613 EURO / piece 68,00

Accessories
Sieve cover 205922244 58
Sieve pan 205922626 47
Sieve pan with discharge nozzle 205922831 170
Intermediate pan 205923753 83
Deaeration ring 203x50 mm 205922053 103
Intermediate ring 205923890 50
Additional pasted seam top Ø 200-203 mm* 205922121 12
Additional pasted seam bottom Ø 200-203 mm* 205922138 12
Sealing ring PVC 205921872 1
Sealing ring VITON 205921957 7
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 200 mm
Quality GOLD* ↕ 50 mm nominal height

Nominal Edelstahlrahmen &

size Metal Wire Cloth ISO 3310-1 / ASTM E11 Quality GOLD
made from Stainless
Steel For any For average For any For average
aperture aperture aperture aperture
size size size size
w / mm Article-No. €/Piece +X +/- Y +X +/- Y

2.5 206133137 441 0,238 0,073 0,019 0,0365 With Inspection

2.36 206133144 441 0,228 0,069 0,114 0,0345 Certificate 3.1 according to
2.24 206133168 441 0,220 0,065 0,11 0,0325 DIN EN 10 204
2 206133175 441 0,204 0,059 0,102 0,0295
1.8 206133199 441 0,189 0,053 0,0945 0,0265
1.7 206133205 441 0,182 0,050 0,091 0,025
1.6 206133229 441 0,175 0,047 0,0875 0,0235 With Calibration
1.4 206133236 441 0,159 0,042 0,0795 0,021 Certificate according to
1.25 206133250 441 0,148 0,038 0,074 0,019 DIN EN ISO / IEC 17025
1.18 206133267 441 0,142 0,036 0,071 0,018 on request
1.12 206133281 441 0,137 0,034 0,0685 0,017 (see on page 04)
1 206133298 441 0,127 0,030 0,0635 0,015
w / µm
900 206133311 428 118,3 27,6 59,15 13,8
850 206133328 428 113,9 26,2 56,95 13,1 Y:
800 206133342 428 109,4 24,8 54,7 12,4 Tolerance for the
710 206133359 428 101,1 22,2 50,55 11,1 arithmetic mean value of
630 206133373 428 93,5 19,9 46,75 9,95 the sum of all measured
600 206133380 428 90,6 19 45,3 9,5 aperture sizes (w).
560 206133403 428 86,6 17,9 43,3 8,95 measured separately in
500 206133410 428 80,5 16,2 40,25 8,1
warp and weft direction.
450 206133434 428 75,2 14,7 37,6 7,35
425 206133441 428 72,5 14 36,25 7
400 206133465 428 69,8 13,3 34,9 6,65 X:
355 206133472 428 64,7 12 32,35 6 Tolerance for the single
315 206133496 428 60 10,8 30 5,4 values of all measured
300 206133502 428 58,2 10,4 29,1 5,2 aperture sizes (w). No
280 206133526 428 55,8 9,8 27,9 4,9 aperture size measured in
250 206133533 428 52 8,9 26 4,45 warp and weft direction
224 206133557 428 48,7 8,1 24,35 4,05 shall exceed x.
212 206133564 428 47,1 7,8 23,55 3,9
200 206133588 428 45,4 7,4 22,7 3,7
180 206133595 428 42,7 6,8 21,35 3,4
160 206133618 428 39,8 6,3 19,9 3,15
150 206133625 428 38,3 6 19,15 3
140 206133649 428 36,8 5,7 18,4 2,85
125 206133656 428 34,5 5,2 17,25 2,6 * tolerances of openings
112 206133670 428 32,4 4,8 11,5 2,4 reduced by 50% compared
106 206133687 428 31,4 4,7 15,7 2,35 with ISO 3310-1
100 206133700 428 30,4 4,5 15,2 2,25
90 206133717 428 28,6 4,2 14,3 2,1
80 206133731 428 26,8 3,9 13,4 1,95
75 206133748 428 25,9 3,7 12,95 1,85
71 206133762 428 25,1 3,6 12,55 1,8
63 206133779 435 23,6 3,4 11,8 1,7
56 206133793 488 22,1 3,2 11,05 1,6
53 206133809 488 21,5 3,1 10,75 1,55
50 206133823 488 20,9 3 10,45 1,5
45 206133830 600 19,7 2,8 9,85 1,4
40 206133854 600 18,6 2,7 9,3 1,35
38 206133861 891 18,1 2,6 9,05 1,3
36 206133885 891 17,6 2,6 8,8 1,3
32 206133892 933 16,6 2,4 8,3 1,2
25 206133915 1.573 14,8 2,2 7,4 1,1

18 19
WHAT WE ANALYSE.

Medicine and Pharmaceuticals Minerals and ores Chemicals Foodstuffs

Fertilisers Paint powders and pigment Refractories Animal feed

Granulates und Pellets Test Laboratory Blasting abrasive material Recycling

Raw Material Sand, gravel, crushed stones Abrasives Sugar and salt

WHAT MAKES US SPECIAL.

Produced and Establishment of

Original and genuine
manufactured in Germany HAVER & BOECKER

Low-noise products for Premium Quality

24-month warranty
particle analysis and service

Products comply with Member of the technical Worldwide distribution

European directives committee network

Particle analysis e-shop

Rapid and easy implemen- Internationally certified
24 hours a day – 7 days
tation of our equipment quality management
a week

Certified member of
Tested and calibrated
DakkS the German
products
Accreditation Body

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 250 mm
↕ 55 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206152718 174 206152725 174 206153722 194

112 206152749 174 206153739 194
106 206152756 174 206152763 174 206648730 194 With Serial Number and
100 206152770 174 206152787 174 206153746 194 Certificate of Compliance
90 206152794 174 206152800 174 206648747 194 with the Order 2.1
80 206152817 174 206153760 194 EN 10204.
75 206152824 174 206152831 174 206648754 194
71 206152848 174 206153777 194
63 206152862 174 206152879 174 206153784 194
56 206152886 174 206153791 194
53 206152893 174 206152909 174 206648761 194
50 206152916 174 206152923 174 206153821 194
45 206152930 174 206152947 174 206153838 194
With Inspection Certificate
40 206152954 174 206153845 194
37.5 206152978 174 206152985 174 206648778 194 3.1 according to DIN
35.5 206152992 174 206153869 194 EN 10 204 on request:
31.5 206153005 174 206153012 174 206153876 194
28 206153029 174 206153883 194 Certification
26.5 206153036 174 206153043 174 206648785 194 (DIN EN 10204)
25 206153050 174 206153067 174 206153890 194 Article-No. 206696861
22.4 206153074 174 206153081 174 206153906 194 EURO / piece: 61,00
20 206153098 156 206153913 194
19 206153104 156 206153111 156 206648792 194 Calibration
18 206153128 156 206153920 194 (DIN EN 10204)
16 206153135 156 206153142 156 206153937 194 Article No. 206697035
14 206153159 156 206153944 194 EURO / piece 147,00
13.2 206153166 156 206153173 156 206648808 194
12.5 206153180 156 206153197 156 206153951 194
11.2 206153203 156 206153210 156 206153968 194
10 206153227 156 206153975 194
9.5 206153241 156 206153258 156 206648815 194 With Calibration
9 206153265 156 206153999 194 Certificate according to
8 206153272 156 206153289 156 206154002 194 DIN EN ISO / IEC 17025
7.1 206153296 156 206154019 194 Article No. 206697301
6.7 206153302 156 206153319 156 206648822 194 EURO / piece 151,00
6.3 206153326 156 206153333 156 206154026 194
5.6 206153357 156 206153364 156 206154033 194
5 206153371 156 206154064 194
4.75 206153388 156 206153395 156 206648839 194
4.5 206153401 156 206154071 194
4 206153418 156 206153425 156 206154088 194
3.55 206153432 156
3.35 206153470 156 206153487 156
3.15 206153494 135
2.8 206153500 135 206153517 135
2.5 206153524 135
2.36 206153531 135 206153548 135
2.24 206153555 135
2 206153562 135 206153579 135
1.8 206153586 135
1.7 206153593 135 206153609 135
1.6 206153616 135
1.4 206153623 135 206153630 135
1.25 206153647 135
1.18 206153654 135 206153661 135
1.12 206153678 135 Note:
1 206153685 135 206153692 135 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

20 21
HAVER Test Sieves with Frame made from Stainless Steel Ø 250 mm
↕ 55 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206154095 135

850 206154118 135 206154125 135
800 206154132 135
710 206154149 135 206154156 135
630 206154163 135
With Serial Number and

Test Sieves
600 206154170 135 206154187 135
560 206154194 135 Certificate of Compliance
500 206154200 135 206154217 135 with the Order 2.1
450 206154224 135 EN 10204.
425 206154231 135 206154248 135
400 206154255 135
355 206154262 135 206154279 135
315 206154286 135
300 206154293 135 206154309 135
280 206154316 135
250 206154323 135 206154330 135
With Inspection Certificate
224 206154354 135
3.1 according to DIN
212 206154361 135 206154378 135
200 206154385 135 EN 10 204 on request:
180 206154392 135 206154408 135
160 206154415 135 Certification
150 206154422 135 206154439 135 (DIN EN 10204)
140 206154453 135 Article-No. 206696861
125 206154460 135 206154477 135 EURO / piece: 61,00
112 206154484 135
106 206154491 135 206154507 135 Calibration
100 206154514 135 (DIN EN 10204)
90 206154521 135 206154538 135 Article No. 206697035
80 206154552 135 EURO / piece 147,00
75 206154569 135 206154576 135
71 206154583 135
63 206154590 135 206154606 135
56 206154613 148
53 206154620 148 206154637 148 With Calibration
50 206154651 148 Certificate according to
45 206154668 174 206154675 174 DIN EN ISO / IEC 17025
40 206154682 174 Article No. 206697301
38 206154699 240 206154705 240 EURO / piece 151,00.
36 206154712 250
32 206154729 265 206154736 265
25 206154743 412 206154750 412
20 206154767 831 206154774 831

Accessories
Sieve cover 205922251 97
Sieve pan 205922640 94
Sieve pan with discharge nozzle 205922848 229
Intermediate ring 205923906 69
Additional pasted seam top Ø 250-315 mm* 205922145 15
Additional pasted seam bottom Ø 250-315 mm* 205922152 15
Sealing ring PVC 205921889 1
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 300 mm (297,5 mm)
↕ 30 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206648297 213

112 206138378 213
106 206648303 213 With Serial Number and
100 206648310 213 Certificate of Compliance
90 206648327 213 with the Order 2.1
80 206138392 213 EN 10204.
75 206648334 213
71 206138408 213
63 206648341 213
56 206138415 213
53 206138422 213
50 206648358 213
45 206138439 213
With Inspection Certificate
40 206138446 213
37.5 206648365 213 3.1 according to DIN
35.5 206138453 213 EN 10 204 on request:
31.5 206138460 213
28 206138477 213 Certification
22.4 206138491 213 (DIN EN 10204)
20 206138507 213 Article-No. 206696861
19 206648396 213 EURO / piece: 61,00
18 206138514 213
16 206138521 213 Calibration
14 206138545 213 (DIN EN 10204)
13.2 206138552 213 Article No. 206697035
12.5 206138569 213 EURO / piece 147,00
11.2 206138576 213
10 206138583 213
9.5 206648402 213
9 206138606 213
8 206138613 213 With Calibration
7.1 206138620 213 Certificate according to
6.7 206138637 213 DIN EN ISO / IEC 17025
6.3 206138644 213 Article No. 206697301
5.6 206174277 194 206138651 213 EURO / piece 151,00
5 206137647 194 206138668 213
4.75 206137654 194 206137661 194 206648419 213
4.5 206137678 194 206138675 213
4 206174093 194 206174109 194 206174116 213
3.55 206137685 194
3.35 206137708 194 206137715 194
3.15 206137722 194
2.8 206138682 194 206138699 194
2.5 206137739 163
2.36 206137746 163 206137753 163
2.24 206137760 163
2 206174284 163 206174291 163
1.8 206137777 163
1.7 206137784 163 206137791 163
1.6 206137821 163
1.4 206137838 163 206137845 163
1.25 206137852 163
1.18 206137869 163 206137876 163
1.12 206137883 163
1 206173317 163 206173324 163
Note:
Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

22 23
HAVER Test Sieves with Frame made from Stainless Steel Ø 300 mm (297,5 mm)
↕ 30 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206137890 163

850 206137913 163 206137920 163
800 206137937 163
710 206137944 163 206137951 163
630 206137968 163
With Serial Number and

Test Sieves
600 206137975 163 206137982 163
560 206137999 163 Certificate of Compliance
500 206173294 163 206173300 163 with the Order 2.1
450 206138019 163 EN 10204.
425 206138026 163 206138033 163
400 206138040 163
355 206138057 163 206138064 163
315 206138071 163
300 206138088 163 206138095 163
280 206138101 163
250 206173270 163 206173287 163
With Inspection Certificate
224 206138118 163
3.1 according to DIN
212 206138125 163 206138132 163
200 206138149 163 EN 10 204 on request:
180 206138156 163 206138163 163
160 206138170 163 Certification
150 206138187 163 206138194 163 (DIN EN 10204)
140 206138200 163 Article-No. 206696861
125 206173256 163 206173263 163 EURO / piece: 61,00
112 206138217 163
106 206138224 163 206138231 163 Calibration
100 206138248 163 (DIN EN 10204)
90 206134547 163 206134554 163 Article No. 206697035
80 206138255 163 EURO / piece 147,00
75 206174079 163 206174086 163
71 206138262 163
63 206174253 176 206174260 176
56 206138279 190
53 206138286 192 206138293 192 With Calibration
50 206138309 195 Certificate according to
45 206136039 226 206136046 226 DIN EN ISO / IEC 17025
40 206163479 226 Article No. 206697301
38 206163486 313 206163493 313 EURO / piece 151,00
36 206163509 325
32 206163516 358 206163523 358
25 206163530 544 206163547 544
20 206163554 971 206163561 971

Accessories
Sieve cover 205922268 103
Additional pasted seam top Ø 250-315 mm* 205922145 15
Additional pasted seam bottom Ø 250-315 mm* 205922152 15
Sealing ring PVC 205921896 1
Sealing ring VITON 205921971 12
Rubber ball 201446515 1
Rubber cube 205332425 1 * up to w 1 mm
Intermediate ring 206762689 78

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 300 mm (297,5 mm)
↕ 60 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206138705 217 206138712 217 206139764 213

112 206138729 217 206139771 213
106 206138736 217 206138743 217 206648426 213 With Serial Number and
100 206138750 217 206138767 217 206174222 213 Certificate of Compliance
90 206138774 217 206138781 217 206139788 213 with the Order 2.1
80 206138798 217 206139795 213 EN 10204.
75 206138804 217 206138811 217 206139801 213
71 206138828 217 206139818 213
63 206138835 217 206138842 217 206169679 213
56 206138859 217 206174185 213
53 206138866 217 206138873 217 206648433 213
50 206138880 217 206138897 217 206168764 213
45 206138903 217 206138910 217 206169662 213
With Inspection Certificate
40 206138927 217 206168757 213
37.5 206138934 217 206138941 217 206139825 213 3.1 according to DIN
35.5 206138958 217 206168290 213 EN 10 204 on request:
31.5 206138965 217 206138972 217 206168740 213
28 206138989 217 206168313 213 Certification
26.5 206138996 217 206139009 217 206139832 213 (DIN EN 10204)
25 206139016 217 206139023 217 206168726 213 Article-No. 206696861
22.4 206139030 194 206139047 194 206169020 213 EURO / piece: 61,00
20 206139054 194 206168795 213
19 206139061 194 206139078 194 206139849 213 Calibration
18 206139085 194 206139856 213 (DIN EN 10204)
16 206139092 194 206139108 194 206169006 213 Article No. 206697035
14 206139115 194 206134776 213 EURO / piece 147,00
13.2 206139122 194 206139139 194 206648440 213
12.5 206139146 194 206139153 194 206168719 213
11.2 206139160 194 206139177 194 206169013 213
10 206139184 194 206168702 213
9.5 206139191 194 206139207 194 206139863 213 With Calibration
9 206139214 194 206139870 213 Certificate according to
8 206139221 194 206139238 194 206168696 213 DIN EN ISO / IEC 17025
7.1 206168856 194 206134813 213 Article No. 206697301
6.7 206139245 194 206139252 194 206648457 213 EURO / piece 151,00
6.3 206168863 194 206168870 194 206168689 213
5.6 206173331 194 206173348 194 206174338 213
5 206139269 194 206134516 213
4.75 206139276 194 206139283 194 206139887 213
4.5 206139290 194 206139894 213
4 206174000 194 206174017 194 206168672 213
3.55 206139306 194
3.35 206139313 194 206139320 194
3.15 206168887 194
2.8 206168603 194 206168610 194
2.5 206134677 163
2.36 206139337 163 206139344 163
2.24 206139351 163
2 206168986 163 206168993 163
1.8 206139368 163
1.7 206139375 163 206139382 163
1.6 206139399 163
1.4 206168832 163 206168849 163
1.25 206139405 163
1.18 206139412 163 206139429 163
1.12 206139436 163 Note:
1 206168771 163 206168788 163 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

24 25
HAVER Test Sieves with Frame made from Stainless Steel Ø 300 mm (297,5 mm)
↕ 60 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206139443 163

850 206139450 163 206139467 163
800 206168801 163
710 206134523 163 206134530 163
630 206174215 163
With Serial Number and

Test Sieves
600 206139474 163 206139481 163
560 206139498 163 Certificate of Compliance
500 206168818 163 206168825 163 with the Order 2.1
450 206139504 163 EN 10204.
425 206139511 163 206139528 163
400 206174208 163
355 206174024 163 206174031 163
315 206139542 163
300 206139900 163 206139917 163
280 206139559 163
250 206168948 163 206168955 163
With Inspection Certificate
224 206139566 163
3.1 according to DIN
212 206139573 163 206139580 163
200 206174192 163 EN 10 204 on request:
180 206139924 163 206139931 163
160 206139597 163 Certification
150 206139603 163 206139610 163 (DIN EN 10204)
140 206139627 163 Article-No. 206696861
125 206168924 163 206168931 163 EURO / piece: 61,00
112 206139634 163
106 206139641 163 206139658 163 Calibration
100 206174048 163 (DIN EN 10204)
90 206174161 163 206174178 163 Article No. 206697035
80 206174413 163 EURO / piece 147,00
75 206168627 163 206168634 163
71 206139665 163
63 206168894 176 206168900 176
56 206139672 190
53 206139689 192 206139696 192 With Calibration
50 206139702 195 Certificate according to
45 206163356 226 206163363 226 DIN EN ISO / IEC 17025
40 206163370 226 Article No. 206697301
38 206163387 313 206163394 313 EURO / piece 151,00
36 206163400 325
32 206163417 358 206163424 358
25 206163431 544 206163448 544
20 206163455 971 206163462 971

Accessories
Sieve cover 205922268 103
Sieve pan 205922671 97
Sieve pan with discharge nozzle 205922855 236
Intermediate pan 205923777 153
Deaeration ring 300x60 mm 205922060 135
Intermediate ring 205923913 78
Additional pasted seam top Ø 250-315 mm* 205922145 15
Additional pasted seam bottom Ø 250-315 mm* 205922152 15
Sealing ring PVC 205921896 1
Sealing ring VITON 205921971 12
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 305 mm = 12‘‘
↕ 60 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206147929 217 206147936 217 206648617 213

112 206147943 217 206149572 213
106 206147950 217 206147967 217 206648624 213 With Serial Number and
100 206147974 217 206147981 217 206648631 213 Certificate of Compliance
90 206147998 217 206148001 217 206149589 213 with the Order 2.1
80 206148018 217 206149619 213 EN 10204.
75 206148025 217 206148032 217 206648648 213
71 206148049 217 206149626 213
63 206148056 217 206148063 217 206149633 213
56 206148070 217 206149640 213
53 206148087 217 206148094 217 206648655 213
50 206148100 217 206148117 217 206149671 213
45 206148124 217 206148131 217 206149688 213
With Inspection Certificate
40 206148162 217 206149695 213
37.5 206148179 217 206148186 217 206149701 213 3.1 according to DIN
35.5 206148193 217 206149718 213 EN 10 204 on request:
31.5 206148209 217 206148216 217 206149725 213
28 206148223 217 206149732 213 Certification
26.5 206148254 217 206148261 217 206149749 213 (DIN EN 10204)
25 206148278 217 206148285 217 206648662 213 Article-No. 206696861
22.4 206148292 194 206148308 194 206149756 213 EURO / piece: 61,00
20 206148315 194 206149763 213
19 206148322 194 206148339 194 206648679 213 Calibration
18 206148360 194 206149770 213 (DIN EN 10204)
16 206148377 194 206148384 194 206149787 213 Article No. 206697035
14 206148391 194 206149794 213 EURO / piece 147,00
13.2 206148407 194 206148414 194 206648686 213
12.5 206148421 194 206148438 194 206149800 213
11.2 206148445 194 206148452 194 206149817 213
10 206148469 194 206149824 213
9.5 206148476 194 206148483 194 206648693 213 With Calibration
9 206148490 194 206149831 213 Certificate according to
8 206148506 194 206148513 194 206149848 213 DIN EN ISO / IEC 17025
7.1 206148520 194 206149855 213 Article No. 206697301
6.7 206148537 194 206148544 194 206648709 213 EURO / piece 151,00
6.3 206148551 194 206148568 194 206648716 213
5.6 206148575 194 206148582 194 206149879 213
5 206148599 194 206149886 213
4.75 206148612 194 206148629 194 206648723 213
4.5 206148636 194 206149893 213
4 206148643 194 206148650 194 206149909 213
3.55 206148667 194
3.35 206148674 194 206148681 194
3.15 206148704 194
2.8 206148711 194 206148728 194
2.5 206148735 163
2.36 206148742 163 206148759 163
2.24 206148766 163
2 206148773 163 206148780 163
1.8 206148797 163
1.7 206148803 163 206148810 163
1.6 206148827 163
1.4 206148834 163 206148841 163
1.25 206148858 163
1.18 206148865 163 206148872 163
1.12 206148889 163 Note:
1 206148896 163 206148902 163 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

26 27
HAVER Test Sieves with Frame made from Stainless Steel Ø 305 mm = 12‘‘
↕ 60 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206148919 163

850 206148926 163 206148933 163
800 206148940 163
710 206148957 163 206148964 163
630 206148971 163
With Serial Number and

Test Sieves
600 206148988 163 206148995 163
560 206149008 163 Certificate of Compliance
500 206149015 163 206149022 163 with the Order 2.1
450 206149039 163 EN 10204.
425 206149046 163 206149053 163
400 206149060 163
355 206149077 163 206149084 163
315 206149091 163
300 206149107 163 206149114 163
280 206149121 163
250 206149138 163 206149145 163
With Inspection Certificate
224 206149152 163
3.1 according to DIN
212 206149169 163 206149176 163
200 206149183 163 EN 10 204 on request:
180 206149190 163 206149206 163
160 206149213 163 Certification
150 206149220 163 206149237 163 (DIN EN 10204)
140 206149244 163 Article-No. 206696861
125 206149251 163 206149268 163 EURO / piece: 61,00
112 206149275 163
106 206149282 163 206149299 163 Calibration
100 206149329 163 (DIN EN 10204)
90 206149336 163 206149343 163 Article No. 206697035
80 206149350 163 EURO / piece 147,00
75 206149367 163 206149374 163
71 206149381 163
63 206149398 176 206149404 176
56 206149411 190
53 206149428 192 206149435 192 With Calibration
50 206149442 195 Certificate according to
45 206163578 226 206163585 226 DIN EN ISO / IEC 17025
40 206163592 226 Article No. 206697301
38 206163608 313 206163615 313 EURO / piece 151,00
36 206163622 325
32 206163653 358 206163660 358
25 206163677 544 206163684 544
20 206163691 971 206163707 971

Accessories
Sieve cover 205922312 103
Sieve pan 205922695 102
Sieve pan with discharge nozzle 205922862 239
Intermediate ring 205923920 78
Deaeration ring 305x60 mm 205922077 144
Additional pasted seam top Ø 250-315 mm* 205922145 15
Additional pasted seam bottom Ø 250-315 mm* 205922152 15
Sealing ring PVC 205921896 1
Sealing ring VITON 205921971 12
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 315 mm
↕ 75 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206150509 230 206150516 230 206151537 235

112 206150523 230 206151544 235
106 206150530 230 206150547 230 206151551 235 With Serial Number and
100 206150578 230 206150585 230 206151568 235 Certificate of Compliance
90 206150592 230 206150608 230 206151575 235 with the Order 2.1
80 206150615 230 206151599 235 EN 10204.
75 206150622 230 206150639 230 206151605 235
71 206150646 230 206151612 235
63 206150660 230 206150677 230 206151629 235
56 206150684 230 206151636 235
53 206150691 230 206150707 230 206151643 235
50 206150714 230 206150721 230 206151674 235
45 206150738 230 206150745 230 206151681 235
With Inspection Certificate
40 206150752 230 206151698 235
37.5 206150769 230 206150776 230 206151704 235 3.1 according to DIN
35.5 206150783 230 206151711 235 EN 10 204 on request:
31.5 206150790 230 206150806 230 206151728 235
28 206150813 230 206151735 235 Certification
26.5 206150820 230 206150837 230 206151742 235 (DIN EN 10204)
25 206150844 230 206150851 230 206151759 235 Article-No. 206696861
22.4 206150868 230 206150875 230 206151766 235 EURO / piece: 61,00
20 206150882 206 206151773 235
19 206150899 206 206150905 206 206151780 235 Calibration
18 206150912 206 206151797 235 (DIN EN 10204)
16 206150943 206 206150950 206 206151803 235 Article No. 206697035
14 206150967 206 206151810 235 EURO / piece 147,00
13.2 206150974 206 206150981 206 206151841 235
12.5 206150998 206 206151001 206 206151858 235
11.2 206151018 206 206151025 206 206151865 235
10 206151049 206 206151872 235
9.5 206151056 206 206151063 206 206151889 235 With Calibration
9 206151070 206 206151919 235 Certificate according to
8 206151087 206 206151094 206 206151926 235 DIN EN ISO / IEC 17025
7.1 206151100 206 206151933 235 Article No. 206697301
6.7 206151117 206 206151124 206 206151940 235 EURO / piece 151,00
6.3 206151155 206 206151162 206 206151957 235
5.6 206151179 206 206151186 206 206151964 235
5 206151193 206 206151988 235
4.75 206151209 206 206151216 206 206151995 235
4.5 206151223 206 206152008 235
4 206151230 206 206151247 206 206152015 235
3.55 206151254 206
3.35 206151261 206 206151278 206
3.15 206151285 175
2.8 206151292 175 206151308 175
2.5 206151315 175
2.36 206151322 175 206151339 175
2.24 206151346 175
2 206151353 175 206151360 175
1.8 206151377 175
1.7 206151407 175 206151414 175
1.6 206151421 175
1.4 206151438 175 206151445 175
1.25 206151452 175
1.18 206151469 175 206151476 175
1.12 206151506 175 Note:
1 206151513 175 206151520 175 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

28 29
HAVER Test Sieves with Frame made from Stainless Steel Ø 315 mm
↕ 75 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206152022 175

850 206152039 175 206152046 175
800 206152053 175
710 206152060 175 206152077 175
630 206152084 175
With Serial Number and

Test Sieves
600 206152091 175 206152107 175
560 206152114 175 Certificate of Compliance
500 206152121 175 206152138 175 with the Order 2.1
450 206152145 175 EN 10204.
425 206152152 175 206152169 175
400 206152176 175
355 206152183 175 206152190 175
315 206152213 175
300 206152220 175 206152237 175
280 206152244 175
250 206152251 175 206152268 175
With Inspection Certificate
224 206152275 175
3.1 according to DIN
212 206152299 175 206152305 175
200 206152312 175 EN 10 204 on request:
180 206152329 175 206152336 175
160 206152343 175 Certification
150 206152350 175 206152367 175 (DIN EN 10204)
140 206152381 175 Article-No. 206696861
125 206152398 175 206152404 175 EURO / piece: 61,00
112 206152411 175
106 206152428 175 206152435 175 Calibration
100 206152442 175 (DIN EN 10204)
90 206152459 175 206152466 175 Article No. 206697035
80 206152473 175 EURO / piece 147,00
75 206152480 175 206152497 175
71 206152503 175
63 206152510 182 206152527 182
56 206152534 192
53 206152541 202 206152558 202 With Calibration
50 206152565 209 Certificate according to
45 206163714 230 206163721 230 DIN EN ISO / IEC 17025
40 206163738 233 Article No. 206697301
38 206163769 322 206163776 322 EURO / piece 151,00
36 206163783 339
32 206163790 374 206163806 374
25 206163813 563 206163820 563
20 206163837 1.119 206163844 1.119

Accessories
Sieve cover 205922275 106
Sieve pan 205922718 105
Sieve pan with discharge nozzle 205922879 240
Deaeration ring 315x75 mm 205922084 167
Intermediate ring 205923937 85
Additional pasted seam top Ø 250-315 mm* 205922145 15
Additional pasted seam bottom Ø 250-315 mm* 205922152 15
Sealing ring PVC 205921896 1
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 350 mm
↕ 60 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206145208 241 206145215 241 206146830 235

112 206145222 241 206146847 235
106 206145239 241 206145246 241 206146854 235 With Serial Number and
100 206145253 241 206145260 241 206146861 235 Certificate of Compliance
90 206145277 241 206145284 241 206146878 235 with the Order 2.1
80 206145291 241 206146908 235 EN 10204.
75 206145307 241 206145314 241 206146915 235
71 206145321 241 206146922 235
63 206145338 241 206145345 241 206146939 235
56 206145352 241 206146946 235
53 206145369 241 206145376 241 206146960 235
50 206145383 241 206145390 241 206146977 235
45 206145406 241 206145413 241 206146984 235
With Inspection Certificate
40 206145420 241 206146991 235
37.5 206145444 241 206145451 241 206147004 235 3.1 according to DIN
35.5 206145468 241 206147028 235 EN 10 204 on request:
31.5 206145475 241 206145482 241 206147035 235
28 206145499 241 206147042 235 Certification
26.5 206145505 241 206145512 241 206147059 235 (DIN EN 10204)
25 206145529 241 206145536 241 206147066 235 Article-No. 206696960
22.4 206145567 241 206145574 241 206147073 235 EURO / piece: 89,00
20 206145581 207 206147080 235
19 206145598 207 206145604 207 206147097 235 Calibration
18 206145611 207 206147103 235 (DIN EN 10204)
16 206145628 207 206145635 207 206147110 235 Article No. 206697042
14 206145659 207 206147127 235 EURO / piece 263,00
13.2 206145666 207 206145673 207 206147134 235
12.5 206145680 207 206145697 207 206147141 235
11.2 206145154 207 206145161 207 206147158 235
10 206145703 207 206147165 235
9.5 206145710 207 206145727 207 206147196 235 With Calibration
9 206145734 207 206147202 235 Certificate according to
8 206145130 207 206145147 207 206147219 235 DIN EN ISO / IEC 17025
7.1 206145741 207 206147226 235 Article No. 206697318
6.7 206145758 207 206145765 207 206147233 235 EURO / piece 270,00
6.3 206145772 207 206145789 207 206147264 235
5.6 206145796 207 206145802 207 206147271 235
5 206145123 207 206147288 235
4.75 206145819 207 206145826 207 206147295 235
4.5 206145833 207 206147301 235
4 206145840 207 206145857 207 206147325 235
3.55 206145864 207
3.35 206145871 207 206145888 207
3.15 206145895 207
2.8 206145918 207 206145925 207
2.5 206145932 182
2.36 206145949 182 206145956 182
2.24 206145963 182
2 206145970 182 206145987 182
1.8 206145994 182
1.7 206146021 182 206146038 182
1.6 206146045 182
1.4 206146052 182 206146069 182
1.25 206146076 182
1.18 206146083 182 206146090 182
1.12 206146106 182 Note:
1 206146120 182 206146137 182 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

30 31
HAVER Test Sieves with Frame made from Stainless Steel Ø 350 mm
↕ 60 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206146144 182

850 206146151 182 206146168 182
800 206146175 182
710 206146182 182 206146199 182
630 206146205 182
With Serial Number and

Test Sieves
600 206146212 182 206146229 182
560 206146236 182 Certificate of Compliance
500 206146243 182 206146250 182 with the Order 2.1
450 206146267 182 EN 10204.
425 206146274 182 206146281 182
400 206146298 182
355 206146304 182 206146311 182
315 206146328 182
300 206146335 182 206146342 182
280 206146359 182
250 206146373 182 206146380 182
With Inspection Certificate
224 206146397 182
3.1 according to DIN
212 206146403 182 206146410 182
200 206146427 182 EN 10 204 on request:
180 206146434 182 206146441 182
160 206146458 182 Certification
150 206146465 182 206146472 182 (DIN EN 10204)
140 206146502 182 Article-No. 206696960
125 206146519 182 206146526 182 EURO / piece: 89,00
112 206146533 182
106 206146540 182 206146557 182 Calibration
100 206146564 182 (DIN EN 10204)
90 206146588 182 206146595 182 Article No. 206697042
80 206146601 182 EURO / piece 263,00
75 206146618 182 206146625 182
71 206146632 206
63 206146649 219 206146656 219
56 206146670 230
53 206146687 232 206146694 232 With Calibration
50 206146700 237 Certificate according to
45 206163905 254 206163912 254 DIN EN ISO / IEC 17025
40 206163929 260 Article No. 206697318
38 206163936 323 206163943 323 EURO / piece 270,00
36 206163950 336
32 206163967 395 206163974 395
25 206163981 609 206163998 609
20 206164025 1.228 206164032 1.228

Accessories
Sieve cover 205922282 179
Sieve pan 205922732 216
Sieve pan with discharge nozzle 205922886 344
Intermediate ring 205923944 101
Deaeration ring 350x60 mm 205922091 175
Additional pasted seam top Ø 350-400 mm* 205922169 16
Additional pasted seam bottom Ø 350-400 mm* 205922176 16
Sealing ring PVC 205921919 2
Sealing ring VITON 205921995 14
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 400 mm
↕ 65 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206139948 310 206139955 310 206140791 299

112 206139962 310 206140807 299
106 206139979 310 206139986 310 206140814 299 With Serial Number and
100 206139993 310 206140005 310 206140821 299 Certificate of Compliance
90 206140012 310 206140029 310 206140838 299 with the Order 2.1
80 206140036 310 206140869 299 EN 10204.
75 206140043 310 206140050 310 206140876 299
71 206140067 310 206140883 299
63 206140074 293 206140081 293 206173959 299
56 206140098 293 206174307 299
53 206140104 293 206140111 293 206140890 299
50 206140128 293 206140135 293 206140906 299
45 206140142 293 206140159 293 206134509 299
With Inspection Certificate
40 206140166 293 206140913 299
37.5 206140173 293 206140180 293 206140920 299 3.1 according to DIN
35.5 206134561 293 206134646 299 EN 10 204 on request:
31.5 206174314 293 206174321 293 206134493 299
28 206140197 293 206140937 299 Certification
26.5 206140203 293 206140210 293 206140944 299 (DIN EN 10204)
25 206140227 293 206140234 293 206140951 299 Article-No. 206696960
22.4 206140241 293 206140258 293 206134486 299 EURO / piece: 89,00
20 206134172 293 206140968 299
19 206140265 293 206140272 293 206140975 299 Calibration
18 206140289 293 206140982 299 (DIN EN 10204)
16 206174239 293 206174246 293 206134479 299 Article No. 206697042
14 206173997 293 206134431 299 EURO / piece 263,00
13.2 206140296 293 206140302 293 206140999 299
12.5 206173973 293 206173980 293 206134639 299
11.2 206140319 293 206140326 293 206134462 299
10 206134592 293 206134622 299
9.5 206169600 293 206169617 293 206141002 299 With Calibration
9 206140333 293 206141019 299 Certificate according to
8 206134158 293 206134165 293 206134455 299 DIN EN ISO / IEC 17025
7.1 206173966 293 206141026 299 Article No. 206697318
6.7 206140340 293 206140357 293 206141033 299 EURO / piece 270,00
6.3 206134134 293 206134141 293 206141040 299
5.6 206168962 293 206168979 293 206174062 299
5 206168917 293 206134448 299
4.75 206140364 293 206140371 293 206141057 299
4.5 206134189 293 206141064 299
4 206134110 293 206134127 293 206134424 299
3.55 206140388 293
3.35 206140395 293 206140401 293
3.15 206134103 293
2.8 206134653 293 206134660 293
2.5 206140418 247
2.36 206140425 247 206140432 247
2.24 206140449 247
2 206134578 247 206134585 247
1.8 206140456 247
1.7 206140463 247 206140470 247
1.6 206140487 247
1.4 206172129 247 206172136 247
1.25 206172112 247
1.18 206140494 247 206140500 247
1.12 206140517 247 Note:
1 206134080 247 206134097 247 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

32 33
HAVER Test Sieves with Frame made from Stainless Steel Ø 400 mm
↕ 65 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206140524 247

850 206140531 247 206140548 247
800 206172105 247
710 206134400 247 206134417 247
630 206174345 247
With Serial Number and

Test Sieves
600 206140555 247 206140562 247
560 206140579 247 Certificate of Compliance
500 206134066 247 206134073 247 with the Order 2.1
450 206134356 247 EN 10204.
425 206140586 247 206140593 247
400 206134349 247
355 206134196 247 206134202 247
315 206140609 247
300 206140616 247 206140623 247
280 206140630 247
250 206134387 247 206134394 247
With Inspection Certificate
224 206140647 247
3.1 according to DIN
212 206140654 247 206140661 247
200 206140678 247 EN 10 204 on request:
180 206134219 247 206134226 247
160 206134233 247 Certification
150 206134301 247 206134318 247 (DIN EN 10204)
140 206140685 247 Article-No. 206696960
125 206134608 247 206134615 247 EURO / piece: 89,00
112 206140692 247
106 206134288 247 206134295 247 Calibration
100 206140708 247 (DIN EN 10204)
90 206134363 247 206134370 247 Article No. 206697042
80 206140715 247 EURO / piece 263,00
75 206134264 247 206134271 247
71 206134684 247
63 206134325 271 206134332 271
56 206140722 286
53 206140739 303 206140746 303 With Calibration
50 206140753 316 Certificate according to
45 206163103 352 206163110 352 DIN EN ISO / IEC 17025
40 206163868 365 Article No. 206697318
38 206163295 497 206163301 497 EURO / piece 270,00
36 206163875 518
32 206163882 573 206163899 573
25 206163080 863 206163097 863
20 206163271 1.258 206163288 1.258

Accessories
Sieve cover 205922299 153
Sieve pan 205922756 157
Sieve pan with discharge nozzle 205922893 263
Intermediate pan 205923784 229
Intermediate ring 205923951 113
Deaeration ring 400x65 mm 205922107 213
Additional pasted seam top Ø 350-400 mm* 205922169 16
Additional pasted seam bottom Ø 350-400 mm* 205922176 16
Sealing ring PVC 205921926 2
Sealing ring VITON 205922015 15
Rubber ball 201446515 1 * up to w 1 mm
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Stainless Steel Ø 450 mm = 18‘‘
↕ 70 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece Article-No. €/Piece

125 206154873 544 206154880 544 206160409 489

112 206154903 544 206160423 489
106 206154927 544 206154934 544 206651952 420 With Serial Number and
100 206154958 544 206154965 544 206160447 489 Certificate of Compliance
90 206154989 544 206154996 544 206160461 489 with the Order 2.1
80 206155016 544 206159601 489 EN 10204.
75 206155030 544 206155047 544 206652041 420
71 206155061 544 206159953 489
63 206155085 516 206155092 516 206159977 432
56 206155115 516 206160485 489
53 206155139 516 206155146 516 206159991 420
50 206155160 516 206155177 516 206159847 489
45 206155191 516 206155207 516 206160010 432
With Inspection Certificate
40 206155221 516 206159625 489
37.5 206155245 516 206762597 516 206160034 420 3.1 according to DIN
35.5 206155269 516 206159861 489 EN 10 204 on request:
31.5 206155283 516 206762580 516 206159649 432
28 206155306 516 206651990 420 Certification
26.5 206155320 516 206155337 516 206160058 420 (DIN EN 10204)
25 206155351 516 206155368 516 206159663 489 Article-No. 206696960
22.4 206155382 516 206155399 516 206160508 432 EURO / piece: 89,00
20 206155412 516 206159687 489
19 206155436 516 206155443 516 206160072 420 Calibration
18 206155467 516 206160522 489 (DIN EN 10204)
16 206155481 516 206155498 516 206159700 432 Article No. 206697042
14 206155511 516 206159724 489 EURO / piece 263,00
13.2 206155535 516 206155542 516 206166159 420
12.5 206150356 516 206150363 516 206160119 489
11.2 206155566 516 206155573 516 206160546 432
10 206155610 516 206159748 489
9.5 206155634 516 206762573 516 206160133 420 With Calibration
9 206155658 516 206160560 489 Certificate according to
8 206155672 516 206155689 516 206159762 432 DIN EN ISO / IEC 17025
7.1 206155702 516 206160584 489 Article No. 206697318
6.7 206155726 516 206155733 516 206652034 420 EURO / piece 270,00
6.3 206155757 516 206155764 516 206159786 489
5.6 206155788 516 206155795 516 206160607 432
5 206150257 516 206160157 489
4.75 206155818 516 206155825 516 206160171 420
4.5 206155849 516 206160621 489
4 206155863 516 206155870 516 206159885 432
3.55 206155894 516
3.35 206155917 516 206762559 516
3.15 206155931 516
2.8 206155955 516 206155962 516
2.5 206150271 434
2.36 206155986 434 206155993 434
2.24 206156013 434
2 206150325 434 206150332 434
1.8 206156037 434
1.7 206156051 434 206156068 434
1.6 206156082 434
1.4 206156105 434 206156112 434
1.25 206156150 434
1.18 206156174 434 206156181 434
1.12 206156204 434 Note:
1 206150295 434 206150301 434 Sieves with perforated
plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

34 35
HAVER Test Sieves with Frame made from Stainless Steel Ø 450 mm = 18‘‘
↕ 70 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206156228 432

850 206156242 432 206156259 432
800 206156273 432
710 206156297 432 206156303 432
630 206156327 432
With Serial Number and

Test Sieves
600 206156341 432 206156358 432
560 206156372 432 Certificate of Compliance
500 206156396 432 206156402 432 with the Order 2.1
450 206156426 432 EN 10204.
425 206156440 432 206156457 432
400 206156471 432
355 206156495 432 206156501 432
315 206156525 432
300 206156549 432 206156556 432
280 206156570 432
250 206156594 432 206156600 432
With Inspection Certificate
224 206156624 432
3.1 according to DIN
212 206156648 432 206156655 432
200 206156679 432 EN 10 204 on request:
180 206150172 432 206150189 432
160 206150202 432 Certification
150 206156693 432 206156709 432 (DIN EN 10204)
140 206156723 432 Article-No. 206696960
125 206156747 432 206156754 432 EURO / piece: 89,00
112 206156778 434
106 206156792 434 206156808 434 Calibration
100 206156822 434 (DIN EN 10204)
90 206156846 434 206156853 434 Article No. 206697042
80 206156877 439 EURO / piece 263,00
75 206156891 467 206156907 467
71 206156921 467
63 206156945 469 206156952 469
56 206160645 603
53 206160669 603 206160676 603 With Calibration
50 206160690 603 Certificate according to
45 206156976 603 206156983 603 DIN EN ISO / IEC 17025
40 206160713 692 Article No. 206697318
38 206160737 775 206160744 775 EURO / piece 270,00
36 206160768 819
32 206160782 964 206160799 964

Accessories
Sieve cover 205922329 279
Sieve pan 205922770 358
Sieve pan with discharge nozzle 205922909 411
Rubber ball 201446515 1
Rubber cube 205332425 1
Intermediate ring 206762702 324

HAVER & BOECKER

 ALPINE Air Jet Sieves with Frame made from Stainless Steel Ø 200 mm
↕ 25 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

200 LS
DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

2.5 206138002 106

2.36 206158468 106 206158475 106
2.24 206137906 106
2 206137807 106 206137814 106
1.8 206137692 106 200 LS
1.7 206158819 106 206158826 106 200x25 mm
1.6 206137630 106
1.4 206137616 106 206137623 106 With Serial Number and
1.25 206137609 106 Certificate of Compliance
1.18 206159038 106 206159045 106 with the Order 2.1
1.12 206137517 106 EN 10204.
1 206137449 106 206137456 106
w / µm
900 206137371 106
850 206159229 106 206159236 106
800 206137159 106
710 206137067 106 206137074 106
630 206136985 106
600 206159281 106 206159298 106 With Inspection Certificate
560 206136909 106 3.1 according to DIN
500 206136800 106 206136817 106 EN 10 204 on request:
450 206136787 106
425 206159311 106 206159328 106 Certification
400 206136770 106 (DIN EN 10204)
355 206136633 106 206136640 106 Article-No. 206696946
315 206136572 106
300 206159526 106 206159533 106 EURO / piece: 34,00
280 206136503 106
250 206136466 106 206136473 106 Calibration
224 206136459 106 (DIN EN 10204)
212 206159540 106 206159557 106 Article No. 206697059
200 206136343 106 EURO / piece 67,00
180 206136237 106 206136244 106
160 206136077 106
150 206159564 106 206159571 106
140 206136022 106
With Calibration
125 206136008 106 206136015 106
112 206135995 106 Certificate according to
106 206159588 106 206159595 106 DIN EN ISO / IEC 17025
100 206135889 106 Article No. 206697271
90 206135803 106 206135810 106 EURO / piece 68,00
80 206135797 106
75 206159816 106 206159823 106
71 206135612 106
63 206135520 108 206135537 108
56 206135407 120
53 206159922 120 206159939 120
50 206135308 120
45 206135049 143 206135056 143
40 206134943 143
38 206160096 202 206160102 202
36 206134868 202
32 206134837 217 206134844 217
25 206134790 352 206134806 352
20 206134752 646 206134769 646

Accessories
Sealing ring 205921940 3
Sieve cover 205923982 151

36 37
ALPINE Air Jet Sieves with Frame made from Stainless Steel Ø 203 mm = 8‘‘
↕ 28 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

200 LS-N
DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

4 206135902 138 206135919 138

3.55 206135964 138
3.35 206135940 138 206135957 138
3.15 206135896 138
200 LS-N

de_Register
2.8 206135926 138 206135933 138

Test Sieves
2.5 206135766 122 203x28 mm
2.36 206135742 122 206135759 122
2.24 206135735 122 With Serial Number and
2 206135711 122 206135728 122 Certificate of Compliance
1.8 206135704 122 with the Order 2.1
1.7 206135681 122 206135698 122 EN 10204.
1.6 206135674 122
1.4 206135650 122 206135667 122
1.25 206135643 122
1.18 206135629 122 206135636 122
1.12 206135605 122
1 206135582 122 206135599 122
w / µm
900 206135575 120 With Inspection Certificate
850 206135551 120 206135568 120 3.1 according to DIN
800 206135544 120 EN 10 204 on request:
710 206135506 120 206135513 120
630 206135490 120 Certification
600 206135476 120 206135483 120 (DIN EN 10204)
560 206135469 120 Article-No. 206696946
500 206135445 120 206135452 120
450 206135438 120 EURO / piece: 34,00
425 206135414 120 206135421 120
400 206135391 120 Calibration
355 206135377 120 206135384 120 (DIN EN 10204)
315 206135360 120 Article No. 206697059
300 206135346 120 206135353 120 EURO / piece 67,00
280 206135339 120
250 206135315 120 206135322 120
224 206135292 120
212 206135278 120 206135285 120
With Calibration
200 206135261 120
180 206135247 120 206135254 120 Certificate according to
160 206135230 120 DIN EN ISO / IEC 17025
150 206135216 120 206135223 120 Article No. 206697271
140 206135209 120 EURO / piece 68,00
125 206135186 120 206135193 120
112 206135179 120
106 206135155 120 206135162 120
100 206135148 120
90 206135124 120 206135131 120
80 206135117 120
75 206135094 120 206135100 120
71 206135087 120
63 206135063 123 206135070 123
56 206135032 132
53 206135018 132 206135025 132
50 206135001 132
45 206134981 153 206134998 153
40 206134974 153
38 206134950 218 206134967 218
36 206134936 218
32 206134912 228 206134929 228
25 206134899 374 206134905 374
20 206134875 672 206134882 672

Accessories
Sieve cover 205923999 174

HAVER & BOECKER

 ALPINE Air Jet Sieves with Frame made from Stainless Steel Ø 203 mm = 8‘‘
↕ 28 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

e 200 LS
DIN ISO 3310-1 ASTM E11
w / mm Article-No. €/Piece Article-No. €/Piece

4 206158895 151 206158901 151

3.55 206158918 151
3.35 206158925 151 206158932 151
3.15 206158949 151
2.8 206158956 151 206158963 151 e 200 LS
2.5 206158970 133 203x28 mm
2.36 206158987 133 206158994 133
2.24 206159007 133 With Serial Number and
2 206159014 133 206159021 133 Certificate of Compliance
1.8 206159052 133 with the Order 2.1
1.7 206159069 133 206159076 133 EN 10204.
1.6 206159083 133
1.4 206159090 133 206159106 133
1.25 206159113 133
1.18 206159120 133 206159137 133
1.12 206159144 133
1 206159151 133 206159168 133
w / µm
900 206158215 132 With Inspection Certificate
850 206158222 132 206158239 132 3.1 according to DIN
800 206158246 132 EN 10 204 on request:
710 206158253 132 206158260 132
630 206158277 132 Certification
600 206158284 132 206158291 132 (DIN EN 10204)
560 206158307 132 Article-No. 206696946
500 206158314 132 206158321 132
450 206158338 132 EURO / piece: 34,00
425 206158345 132 206158352 132
400 206158369 132 Calibration
355 206158376 132 206158383 132 (DIN EN 10204)
315 206158390 132 Article No. 206697059
300 206158406 132 206158413 132 EURO / piece 67,00
280 206158420 132
250 206158437 132 206158444 132
224 206158451 132
212 206158482 132 206158499 132
With Calibration
200 206158505 132
180 206158512 132 206158529 132 Certificate according to
160 206158536 132 DIN EN ISO / IEC 17025
150 206158543 132 206158550 132 Article No. 206697271
140 206158567 132 EURO / piece 68,00
125 206158574 132 206158581 132
112 206158598 132
106 206158604 132 206158611 132
100 206158628 132
90 206158635 132 206158642 132
80 206158659 132
75 206158666 132 206158673 132
71 206158680 132
63 206158697 136 206158703 136
56 206158710 145
53 206158727 145 206158734 145
50 206158741 145
45 206158758 168 206158765 168
40 206158772 168
38 206158789 228 206158796 228
36 206158802 228
32 206158833 241 206158840 241
25 206158857 388 206158864 388
20 206158871 685 206158888 685

Accessories
Sieve cover 205923999 174

38 39
HAVER Test Sieves for
withCereals
Frame acc.
madetofrom
ISO 5223
Stainless Steel Ø 200 mm
with frameto
according made from Stainless
ISO 5223 Steel
for Cereals ↕ 32 mm nominal height

Nominal size Perforated Plate - Stainless Steel

w / mm Article-No. €/Piece Article-No. €/Piece

Width x Slot holes rounded Width Round holes
Length

3.55x20.0 206165206 248

2.8x20.0 206165152 248
2.5x20.0 206163332 248 With Certificate of

Test Sieves
2.25x20.0 206165220 248 Compliance with the
2.2x20.0 206163127 248 Order 2.1 DIN EN 10204
2.0x20.0 206160270 248
1.9x20.0 206165213 248 With Inspection Certificate
1.8x20.0 206160959 248 3.1 according to DIN EN
1.7x20.0 206159304 248 10 204 on request:
1.0x20.0 206160966 248 Article-No. 206696946
4.5 206165398 185 EURO / Piece: 33.00
(not acc. to ISO 5223) 3.55 206165381 185

Accessories
Sieve cover 205922237 58 Sieve cover 205922237 58 Ø 200 mm
Sieve pan 205922589 47 Sieve pan 205922589 47 ↕ 50 mm nominal height

HAVER Test Sieves for Tobacco

with frame made from Stainless Steel
Nominal size Perforated Plate

w / mm Article-No. €/Piece Article-No. €/Piece

200x50 mm 203x50 mm
2.38x31.75 206161963 465 206161895 465
2.0x50 206161987 465 206161918 465 * Gap between the slots:
1.7x50 206161970 465 206161901 465 2.78 mm

Accessories
Sieve pan 205922589 47 Sieve pan 205922626 47

Ø 300 x 300 mm
HAVER Grid Sieves acc. to DIN EN 933-3 ↕ 75 mm nominal height
with frame made from Aluminium with parallel cylindric bars

Nominal size Rod Bars (Ø 5 mm) - Stainless Steel

w / mm Article-No. €/Piece

50 206468765 279
40 206468741 279
31.5 206468734 279
25 206468659 279 With Serial Number and
20 206468666 279 Certificate of Compliance
16 206468673 293 with the Order 2.1
12.5 206468680 293 EN 10 204
10 206468697 293
8 206468628 306 With Inspection Certificate
7.2 206468758 306 acc. to EN 1097-8 3.1 according to DIN EN
6.3 206468635 306 10 204 on request:
5 206468642 306 Article-No. 206698520
4 206468703 315 EURO / Piece: 61.00
3.15 206468710 315
2.5 206468727 315

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Beechwood Ø 300 x 300 mm
↕ 80 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Artic- €/Piece Article-No. €/Piece Article-No. €/Piece
le-No.

125 206172082 169 206172099 169 206170804 185

With Serial Number and
112 206169853 169 206170798 185
106 206762634 169 206169877 169 206170064 185 Certificate of Compliance
100 206172068 169 206172075 169 206170781 185 with the Order 2.1
90 206169884 169 206169891 169 206170774 185 EN 10204.
80 206173782 169 206170767 185
75 206173683 169 206173690 169 206170071 185
71 206172051 169 206170750 185
63 206172013 169 206172020 169 206170743 185
56 206172006 169 206170736 185
53 206169907 169 206169914 169 206170088 185
50 206171986 169 206171993 169 206170729 185 With Inspection Certificate
45 206171962 169 206171979 169 206170712 185 3.1 according to DIN
40 206171955 169 206170705 185
EN 10 204 on request:
37.5 206173669 169 206173676 169 206172044 185
35.5 206171948 169 206170699 185
31.5 206171924 169 206171931 169 206170682 185 Certification
28 206171917 169 206170675 185 (DIN EN 10204)
26.5 206169921 169 206169938 169 206170095 185 Article-No. 206696861
25 206171894 169 206171900 169 206170668 185 EURO / piece: 61,00
22.4 206171870 169 206171887 169 206170651 185
20 206171863 169 206170644 185 Calibration
19 206173645 169 206173652 169 206170101 185 (DIN EN 10204)
18 206171856 169 206170637 185 Article No. 206697035
16 206171832 169 206171849 169 206170613 185 EURO / piece 147,00
14 206171825 169 206170606 185
13.2 206169945 169 206169952 169 206170118 185
12.5 206171801 169 206171818 169 206170590 185
11.2 206171788 169 206171795 169 206170583 185
10 206171771 169 206170576 185 With Calibration
9.5 206173621 169 206173638 169 206170125 185 Certificate according to
9 206171764 169 206170569 185 DIN EN ISO / IEC 17025
8 206171740 169 206171757 169 206170538 185 Article No. 206697301
7.1 206171733 169 206170507 185 EURO / piece 151,00
6.7 206169969 169 206762641 169 206170132 185
6.3 206171719 169 206171726 169 206170491 185
5.6 206171696 169 206171702 169 206170484 185
5 206171689 169 206170323 185
4.75 206173607 169 206173614 169 206170811 185
4.5 206171672 169 206170194 185
4 206171658 169 206171665 169 206170149 185
3.55 206171641 169
3.35 206173430 169 206173447 169
3.15 206171634 169
2.8 206171610 169 206171627 169
2.5 206171603 155
2.36 206173584 155 206173591 155
2.24 206171597 155
2 206171573 155 206171580 155
1.8 206171566 155
1.7 206173416 155 206173423 155
1.6 206171559 155
1.4 206171535 155 206171542 155
1.25 206171528 155
1.18 206173706 155 206173713 155 Note:
1.12 206171511 155 Sieves with perforated
1 206171498 155 206171504 155 plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

40 41
HAVER Test Sieves with Frame made from Beechwood Ø 300 x 300 mm
↕ 80 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206171481 155

850 206173720 155 206173737 155
800 206171474 155
710 206171450 155 206171467 155
630 206171443 155
With Serial Number and

Test Sieves
600 206173744 155 206173751 155
560 206171436 155 Certificate of Compliance
500 206171412 155 206171429 155 with the Order 2.1
450 206171405 155 EN 10204.
425 206169976 155 206169983 155
400 206171399 155
355 206171375 155 206171382 155
315 206171368 155
300 206173768 155 206173775 155
280 206171351 155
250 206171337 155 206171344 155
With Inspection Certificate
224 206171320 155
3.1 according to DIN
212 206169990 155 206170002 155
200 206171313 155 EN 10 204 on request:
180 206171290 155 206171306 155
160 206171283 155 Certification
150 206173546 155 206173553 155 (DIN EN 10204)
140 206171276 155 Article-No. 206696861
125 206171252 155 206171269 155 EURO / piece: 61,00
112 206171245 155
106 206170019 155 206170026 155 Calibration
100 206171238 155 (DIN EN 10204)
90 206171214 155 206171221 155 Article No. 206697035
80 206171207 155 EURO / piece 147,00
75 206173560 155 206173577 155
71 206171191 164
63 206171177 170 206171184 170
56 206170033 178
53 206170040 183 206170057 183 With Calibration
50 206172037 187 Certificate according to
45 206170545 193 206170552 193 DIN EN ISO / IEC 17025
Article No. 206697301
EURO / piece 151,00

Accessories
Receiver 205922794 73
Sieve cover 205922336 34
Rubber ball 201446515 1
Rubber cube 205332425 1

HAVER & BOECKER

 HAVER Test Sieves with Frame made from Beechwood Ø 500 x 500 mm
↕ 80 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel Perforated Plate with
square holes made
from Galvanized
Steel
DIN ISO 3310-1 ASTM E11 DIN ISO 3310-2
w / mm Artic- €/Piece Article-No. €/Piece Article-No. €/Piece
le-No.

125 206173089 211 206173096 211 206171115 235

With Serial Number and
112 206173102 211 206171108 235
106 206170156 211 206170163 211 206170439 235 Certificate of Compliance
100 206173065 211 206173072 211 206171092 235 with the Order 2.1
90 206173454 211 206173461 211 206171085 235 EN 10204.
80 206173058 211 206171078 235
75 206173478 211 206173485 211 206170446 235
71 206173041 211 206171061 235
63 206173027 211 206173034 211 206171054 235
56 206173010 211 206171047 235
53 206170170 211 206170187 211 206170453 235
50 206172990 211 206173003 211 206171030 235 With Inspection Certificate
45 206172976 211 206172983 191 206171023 235 3.1 according to DIN
40 206172969 211 206171016 235
EN 10 204 on request:
37.5 206173492 211 206173508 191 206172143 235
35.5 206172952 211 206171009 235
31.5 206172938 211 206172945 191 206170996 235 Certification
28 206172921 211 206170989 235 (DIN EN 10204)
26.5 206170200 211 206170217 211 206170460 235 Article-No. 206696960
25 206172907 211 206172914 211 206170972 235 EURO / piece: 89,00
22.4 206172884 211 206172891 191 206170965 235
20 206172877 211 206170958 235 Calibration
19 206173515 211 206173522 211 206170477 235 (DIN EN 10204)
18 206172860 211 206170941 235 Article No. 206697042
16 206172846 211 206172853 191 206170934 235 EURO / piece 263,00
14 206172839 211 206170927 235
13.2 206170224 211 206170231 211 206171146 235
12.5 206172815 211 206172822 191 206170910 235
11.2 206172792 211 206172808 211 206170903 235
10 206172785 211 206170897 235 With Calibration
9.5 206173393 211 206173409 211 206171153 235 Certificate according to
9 206172778 211 206170880 235 DIN EN ISO / IEC 17025
8 206172754 211 206172761 211 206170873 235 Article No. 206697318
7.1 206172747 211 206170866 235 EURO / piece 270,00
6.7 206170248 211 206170255 191 206171160 235
6.3 206172723 211 206172730 211 206170859 235
5.6 206172709 211 206172716 191 206171122 235
5 206172693 211 206170842 235
4.75 206170262 211 206170279 211 206171139 235
4.5 206172686 211 206170835 235
4 206172662 211 206172679 191 206170828 235
3.55 206172655 211
3.35 206173171 211 206173188 211
3.15 206172648 211
2.8 206172624 211 206172631 211
2.5 206172617 187
2.36 206173119 187 206173126 187
2.24 206172600 187
2 206172587 187 206172594 187
1.8 206172570 187
1.7 206173195 187 206173201 187
1.6 206172563 187
1.4 206172549 187 206172556 187
1.25 206172532 187
1.18 206170286 187 206170293 187 Note:
1.12 206172525 187 Sieves with perforated
1 206172501 187 206172518 187 plates made from
galvanized steel have to be
stored in a dry place and
must be cleaned and dried
after use.

42 43
HAVER Test Sieves with Frame made from Beechwood Ø 500 x 500 mm
↕ 80 mm nominal height

Nominal size Metal Wire Cloth made from Stainless Steel

DIN ISO 3310-1 ASTM E11
w / µm Article-No. €/Piece Article-No. €/Piece

900 206172495 187

850 206173218 187 206173225 187
800 206172488 187
710 206172464 187 206172471 187
630 206172457 187
With Serial Number and

Test Sieves
600 206170309 187 206170316 187
560 206172440 187 Certificate of Compliance
500 206172426 187 206172433 187 with the Order 2.1
450 206172419 187 EN 10204.
425 206173157 187 206173164 187
400 206172402 187
355 206172389 187 206172396 187
315 206172372 187
300 206173133 187 206173140 187
280 206172365 187
250 206172341 187 206172358 187
With Inspection Certificate
224 206172334 187
3.1 according to DIN
212 206170514 187 206170521 187
200 206172327 187 EN 10 204 on request:
180 206172303 187 206172310 187
160 206172297 187 Certification
150 206173232 187 206173249 187 (DIN EN 10204)
140 206172280 187 Article-No. 206696960
125 206172266 187 206172273 187 EURO / piece: 89,00
112 206172259 187
106 206170330 187 206170347 187 Calibration
100 206172242 187 (DIN EN 10204)
90 206172228 187 206172235 187 Article No. 206697042
80 206172211 198 EURO / piece 263,00
75 206170354 198 206170361 198
71 206172204 204
63 206172181 216 206172198 216
56 206170378 232
53 206170385 246 206170392 246 With Calibration
50 206170408 269 Certificate according to
45 206170415 288 206170422 288 DIN EN ISO / IEC 17025
Article No. 206697318
EURO / piece 270,00

Accessories
Receiver 205922800 97
Sieve cover 205922343 40
Rubber ball 201446515 1
Rubber cube 205332425 1

HAVER & BOECKER

 400 mm
Interchangeable Screens for HAVER Aluminium Sieves
Nominal size Metal Wire Cloth made from Perforated Plate with square ho-
Stainless Steel les made from Galvanized Steel
DIN ISO 3310-1 DIN ISO 3310-2
w / mm Article-No. €/Piece Article-No. €/Piece

125 206064905 102 206065841 156

112 206064912 102 206065858 156
106 206064929 102 206065865 156
100 206064936 102 206065872 156
90 206064943 102 206065889 156
80 206064950 102 206065896 156
75 206064967 102 206065902 156
71 206064974 102 206065919 156
63 206064981 102 206065926 156
56 206064998 102 206065933 156
53 206065001 102 206065940 156
50 206065018 102 206065957 156
45 206065025 102 206065964 156
40 206065032 102 206065971 156
37.5 206065049 102 206065988 156
35.5 206065056 102 206065995 156
31.5 206065063 102 206066008 156
28 206065070 102 206066015 156
26.5 206065087 102 206066022 156
25 206065094 102 206066039 156
22.4 206065100 102 206066046 156
20 206065117 102 206066053 156
19 206065124 102 206066060 156
18 206065131 102 206066077 156
16 206065148 102 206066084 156
14 206065155 102 206066091 156
13.2 206065162 102 206066107 156
12.5 206065179 102 206066114 156
11.2 206065186 102 206066121 156
10 206065193 102 206066138 156
9.5 206065209 102 206066145 156
9 206065216 102 206066152 156
8 206065223 102 206066169 156
7.1 206065230 102 206066176 156
6.7 206065247 102 206066183 156
6.3 206065254 102 206066190 156
5.6 206065261 108 206066206 156
5 206065278 108 206066213 156
4.75 206065285 108 206066220 156
4.5 206065292 108 206066237 156
4 206065308 108 206066244 156
3.55 206065315 108
3.35 206065322 108
3.15 206065339 108
2.8 206065346 108
2.5 206065353 87
2.36 206065360 87
2.24 206065377 87
2 206065384 87
1.8 206065391 87
1.7 206065407 87
1.6 206065414 87
1.4 206065421 87
1.25 206065438 87
1.18 206065445 87
1.12 206065452 87
1 206065469 87

44 45
 400 mm
Interchangeable Screens for HAVER Aluminium Sieves
Nominal size Metal Wire Cloth made from Stainless Steel
DIN ISO 3310-1
w / µm Article-No. €/Piece

900 206065476 87
850 206065483 87
800 206065490 87
710 206065506 87
630 206065513 87
600 206065520 87

Test Sieves
560 206065537 87
500 206065544 87
450 206065551 87
425 206065568 87
400 206065575 87
355 206065582 87
315 206065599 87
300 206065605 87
280 206065612 87
250 206065629 87
224 206065636 87
212 206065643 87
200 206065650 58
180 206065667 58
160 206065674 58
150 206065681 58
140 206065698 58
125 206065704 58
112 206065711 62
106 206065728 64
100 206065735 64
90 206065742 85
80 206065759 94
75 206065766 98
71 206065773 104
63 206065780 116
56 206065797 132
53 206065803 145
50 206065810 164
45 206065827 183
40 206065834 204

Delivery form
Woven Wire Cloth
w 125 - 6.3 mm ready to install discs
w 5.6 mm - 212 µm ready to install discs with
impressed border
w 200 µm - 40 µm square. cut-to-size pieces

Perforated Metal Plate

w 4 - 125 mm ready to install discs

HAVER & BOECKER

 HAVER Test Sieve Cleaners

Test Sieve Cleaners using ultrasonic action Article-No. €/Piece

USC 200 Multi for 5 test sieves max. Ø ≤ 230 205322259 4.266
USC 200 S for test sieves Ø ≤ 230 mm 205323065 1.334
USC 500 S for test sieves Ø ≤ 500 mm    205323072 5.106 with sieve cleaning mode
for the cleaning of analysis
Included in delivery: test sieves
USC 200 S USC 500 S USC 200 Multi
1 cover made of synthetic 1 cover made from stainless steel 1 cover made from stainless steel
1 sieve rack made fromless 1 insert basket made from 1 sieve rack made from stain-
USC 200 / USC 500
stainless steel stainless steel less steel
1 litre cleaning fluid 5 litre cleaning fluid 5 litre cleaning fluid

Accessories Article-No.
5 Litre cleaning fluid 205322365 60
1 Litre cleaning fluid 205322600 17
Cover for USC 200 S 205323607 44
Cover for USC 500 S 205323614 251
Insert basket for USC 500 S    205323621 341
Sieve rack for USC 200 S 205323638 101
Cover for USC 200 Multi 205326929 120 USC 200 Multi
Sieve rack for USC 200 Multi    205327131 325
Insert basket for USC 200 S    206599254 126

Sieve Holder for Test sieves Ø 200 and 203 mm

Sieve holder Article-No. €/Piece

for 5 ALPINE Test sieves Ø 200 and 203 mm 205332005 122
for 5 HAVER Test sieves Ø 200 and 203 mm 206515766 122

HAVER Drip-off Weight Test Set for Canned Food

Component parts for sieves Ø 200 mm
Slope device for Test Sieves Ø 200/300 mm 205324383 655
HAVER Test Sieves with Frame, w 2.8 mm 206146489 114
Intermediate pan 205923715 83
Sieve pan with discharge nozzle for wet sieving 205922824 170
Component parts for sieves Ø 300 mm
Slope device for Test Sieves Ø 200/300 mm 205324383 655
HAVER Test Sieves with Frame, w 2.8 mm 206168603 194
Intermediate pan 205923777 153
Sieve pan with discharge nozzle 205922855 236

HAVER Cones
for the determination of the absorbent power and water retention capacity of
granular products using the Westinghouse-Method

Cones 75 mm height and Ø 70 mm Article-No. €/Piece

Metal Wire Cloth
Cones 75 mm height and Ø 70 mm 205324369 66
w: 0,355 mm | d: 0,224 mm
Cones 75 mm height and Ø 70 mm 205324376 66
w: 0,250 mm | d: 0,160 mm

Cones 105 mm height and Ø 100 mm Article-No. €/Piece

Metal Wire Cloth
Cones 105 mm height and Ø 100 mm 205324345 73 Corresponds to the
w: 0,355 mm | d: 0,224 mm European standard DIN
Cones 105 mm height and Ø 100 mm 205324352 73 SPEC 1155 - DIN CEN/TS
w: 0,250 mm | d: 0,160 mm 15366 / NF V 19-002

46 47
 Inspection of Test Sieve Shakers

Inspection of Test Sieve Shakers within Quality Assurance

The standard EN ISO 9000 ff requires measuring instruments to be inspected at regular
intervals (Recommendation every 2-3 years). The oscillation movements of test sieve
shakers have an important influence on the sieving result. They are therefore regarded
and treated as measuring instruments.

Assessment for the Test Sieve Shakers:

After a successful inspection the test sieve shakers receive an inspection seal and an
inspection certificate 3.1 according to EN 10 204. In case of unacceptable deviations or
defects. a cost estimate for the repair is submitted to the customer.

Inspection of a Test Sieve Shaker at our Works in Oelde:

System diagnostics including amplitude check. mechanical and electrical inspection.
and test run with inspection certificate 3.1
Please note:
EURO / machine 250.00
The machines have to be
cleaned by the customer.
They have to be free
from any contaminations.
Otherwise. we may have to
Inspection of a Test Sieve Shaker „On-Site“: charge additional costs.
System diagnostics including amplitude check. mechanical inspection and test run
When sending in please
with inspection certificate 3.1
submit a declaration of no
objection
EURO / machine upon request

Inspection of the Test Sieve Shakers Control:

System diagnostics and performance test

EURO / control 200.00

HAVER & BOECKER

 HAVER Test Sieve Shaker EML 200
for dry- and wet sieving

EML 200 Pure with clamping system Classic „eco“ Article-No. €/Piece
complete with
1 cover with inspection glass
Clamping system* for 2 guide rods M16 x 660 mm
and 2 clamping nuts
110-230 V, 50-60 Hertz 205322921 2.553

EML 200 Premium with clamping system Classic

complete with EML 200 Pure
1 cover with inspection glass Dry sieving
Clamping system* for 2 guide rods M20 x 660 mm
and 2 clamping nuts
110-230 V, 50-60 Hertz 205323003 3.188

EML 200 Premium with quick-release clamping system HAVER TwinNut

complete with
1 cover with inspection glass
Clamping system* for 2 guide rods M20 x 660 mm
and 2 clamping nuts
110-230 V, 50-60 Hertz 205322938 3.356

EML 200 Premium Remote with Spannsystem Classic

EML 200 Premium
complete with
Dry sieving
1 cover with full cone nozzle and inspection glass
Clamping system* for 2 guide rods M20 x 660 mm
and 2 clamping nuts
1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m)
110-230 V, 50-60 Hertz 205323034 3.693

EML 200 Premium Remote with quick-release clamping system HAVER TwinNut
complete with
1 cover with full cone nozzle and inspection glass
Clamping system* for 2 guide rods M20 x 660 mm
and 2 clamping nuts EML 200 Premium
1 water plug with socket and 2 hose clipses Remote
1 PVC-water hose (3 lin.m) Dry and wet sieving
110-230 V, 50-60 Hertz 205322945 3.860

With Inspection Certificate

*adapted for 9 test sieves (200x50 mm) or 15 test sieves (200x32 mm) 3.1 according to DIN
EN 10 204 on request:
Article-No. 206944054
EURO / piece: 50,00

Accessories
IQ/OQ documentation 206769374 270 CSA Basic license
Reduction pieces for test sieves Ø 100 mm 205323577 355 included when purchas-
Reduction pieces for test sieves Ø 150 mm 205323591 355
ing a EML 200 test sieve
Reduction pieces for test sieves Ø 76 mm (3“) 205323676 355
Cover with full cone nozzle and inspection glass for EML Remote 205325212 351 shaker
Cover with inspection glass for EML Premium + EML Pure 205325236 201
Full cone nozzle 4-piece. ready for installation 205323553 74 Upgrade to CSA Expert
Water plug with socket and 2 hose clipses 205323195 32 license when purchasing a
PVC-water hose ½“. 3 lin.m 205323225 12 EML 200 test sieve shaker
Guide rod Classic „eco“ 660 mm (1 piece) 206515797 68 +200€
Knurled nut for Classic „eco“ 208562010 55
Guide rod Classic / HAVER TwinNut 660 mm (1 piece)1 207963559 95 Upgrade to CSA Network
Guide rod Classic / HAVER TwinNut 660 mm (1 piece)2 206515773 95 license when purchasing a
Knurled nut for Classic - System (1 piece) 208561990 69 EML 200 test sieve shaker
Knurled nut for HAVER TwinNut - System (1 piece) 208440011 153
+400€
Sound absorbing cupboard for EML 200 205323485 1.863
Sieve pan, Stainless Steel 1
built until 06/2018
Sieve pan 205922589 47
Sieve pan with discharge nozzle for wet sieving 205922824 170
2
built since 07/2018

48 49
 HAVER Test Sieve Shaker EML 315 digital plus
for dry- and wet sieving

EML 315 digital plus T with clamping system Classic Article-No. €/Piece
complete with
1 cover with inspection glass
Clamping system for 2 guide rods 660 mm and 2 knurled nuts
1 external special plug-type connector in shielded enclosure (only for 110 V)
110 V, 50-60 Hertz 205322686 4.299
230 V, 50-60 Hertz 205322679 4.080

EML 315 digital plus T with quick-release clamping system HAVER TwinNut EML 315 digital plus T
Dry sieving
complete with
1 cover with inspection glass
Clamping system for 2 guide rods 660 mm and 2 knurled nuts
1 external special plug-type connector in shielded enclosure (only for 110 V)
110 V, 50-60 Hertz 205322785 4.465
230 V, 50-60 Hertz 205322778 4.252

EML 315 digital plus N with clamping system Classic

complete with
1 cover with inspection glass
Clamping system for 2 guide rods 660 mm and 2 knurled nuts
1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m)
EML 315 digital plus N
1 external special plug-type connector in shielded enclosure (only for 110 V)
Dry and wet sieving
110 V, 50-60 Hertz 205322709 4.638
230 V, 50-60 Hertz 205322693 4.417

EML 315 digital plus N with quick-release clamping system HAVER TwinNut

Test Sieve Shakers

complete with
1 cover with inspection glass and integrated wide spreading spray diffuser
Clamping system for 2 guide rods 660 mm and 2 knurled nuts
1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m)
1 external special plug-type connector in shielded enclosure (only for 110 V)
110 V, 50-60 Hertz 205322808 4.809
230 V, 50-60 Hertz 205322792 4.589

*adapted for 7 test sieves (315x75 mm) or 8 test sieves (300x60 mm)

Accessories
IQ/OQ documentation 206769374 270
Cover with wide spreading spray diffuser (Ø 300/305/250/200 mm) 205323416 525
Cover with wide spreading spray diffuser (Ø 315/250/200 mm) 205323423 549
Cover with inspection glass (Ø 300/315/250/200 mm) 205323430 378
Cover with inspection glass (Ø 315/250/200 mm) 205323409 404
Inspection glass without centre hole 205323683 19
Inspection glass with centre hole 205323690 26
Wide spreading spray diffuser with socket 205323560 153
Water plug with socket and 2 hose clipses 205323195 32
PVC-water hose ½“. 3 lin.m 205323225 12
Guide rod Classic / HAVER TwinNut 660 mm (1 piece)1 207963559 95
Guide rod Classic / HAVER TwinNut 660 mm (1 piece)2 206515773 95 With Inspection Certificate
Knurled nut for Classic - System (1 piece) 208561990 69 3.1 according to DIN
Knurled nut for HAVER TwinNut - System (1 piece) 208440011 153 EN 10 204 on request:
Reduction piece made from polyamide to receive a sieve pan with 205323447 183 Article-No. 206944054
discharge nozzle Ø 200 mm EURO / piece: 50,00
Sound absorbing cupboard for HAVER EML 315 206515780 1.936
Sieve pan, Stainless Steel 1
built until 06/2018
Sieve pan 205922671 97
Sieve pan with discharge nozzle 205922855 236
2
built since 07/2018

HAVER & BOECKER

 HAVER Test Sieve Shaker EML 450 digital plus
for dry- and wet sieving

EML 450 digital plus T with clamping system Classic Article-No. €/Piece
complete with
1 cover with inspection glass
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts
1 external special plug-type connector in shielded enclosure (only for 110 V)
110 V, 50-61 Hertz 205322662 7.001
230 V, 50-60 Hertz 205322631 6.424

EML 450 digital plus T with quick-release clamping system HAVER TwinNut EML 450 digital plus T
Dry sieving
complete with
1 cover with inspection glass
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts
1 external special plug-type connector in shielded enclosure (only for 110 V)
110 V, 50-61 Hertz 205322822 7.196
230 V, 50-60 Hertz 205322815 6.627

EML 450 digital plus N with clamping system Classic

complete with
1 cover with inspection glass and integrated wide spreading spray diffuser
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts
1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m)
230 V, 50-60 Hertz 205322648 6.674
EML 450 digital plus N with quick-release clamping system HAVER TwinNut
complete with EML 450 digital plus N
1 cover with inspection glass and integrated wide spreading spray diffuser Dry and wet sieving
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts
1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m)
230 V, 50-60 Hertz 205322839 6.870

*adapted for 13 test sieves (400x65 mm)

Accessories
IQ/OQ documentation 206769374 270
Cover with wide spreading spray diffuser (Ø 205323362 699
450/400/350/315/305/300 mm)
Cover with inspection glass (Ø 450/400/350/315/305/300 mm) 205323355 544
Guide rod Classic / HAVER TwinNut 1000 mm (1 piece) 205323669 215
Sound absorbing cupboard for HAVER EML 450 205323515 3.170
Additionel weight for test sieves Ø 200-450 mm (27 kg) 205323379 308
Wide spreading spray diffuser with socket 205323560 153
PVC-water hose ½“. 3 lin.m 205323225 12
Water plug with socket and 2 hose clipses 205323195 32
Reduction piece for cover made from polyamide for test sieves Ø 205323386 308
200 mm
Inspection glass without centre hole EML 450 / UWL 400 205323584 26
Inspection glass with centre hole EML 450 / UWL 400 205323645 32
Knurled nut for Classic - System (1 piece) 200551449 119
Knurled nut for HAVER TwinNut - System (1 piece) 208562034 230
Reduction piece made from polyamide to receive a sieve pan < 204362997 190 With Inspection Certificate
400 mm with discharge nozzle 3.1 according to DIN
Sieve pan, Stainless Steel EN 10 204 on request:
Article-No. 206944054
Sieve pan 205922756 157
Sieve pan with discharge nozzle 205922893 263 EURO / piece: 50,00

50 51
 HAVER Test Sieve Shaker UWL 400
for dry- and wet sieving

UWL 400 T with clamping system Classic Article-No. €/Piece

complete with
1 cover with inspection glass
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts
205323102 7.086
UWL 400 T with quick-release clamping system HAVER TwinNut
complete with
1 cover with inspection glass UWL 400 T
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts Dry sieving
205322846 7.277
UWL 400 H with clamping system for beechwood frames
complete with
1 special appliance for beechwood frames 300x300mm / 500x500 mm
205323133 8.798
UWL 400 N with clamping system Classic
&nbsp;complete with
1 cover with inspection glass and integrated wide spreading spray diffuser
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts
1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m) UWL 400 H
205323140 7.281 Dry sieving
UWL 400 N with quick-release clamping system HAVER TwinNut
complete with
1 cover with inspection glass and integrated wide spreading spray diffuser
Clamping system for 2 guide rods 1000 mm and 2 knurled nuts

Test Sieve Shakers

1 water plug with socket and 2 hose clipses
1 PVC-water hose (3 lin.m)
205322853 7.473

*adapted for 13 test sieves (400x65 mm)

UWL 400 N
Dry and wet sieving

Accessories
Cover with wide spreading spray diffuser (Ø 400/300 mm) 205323744 611
Cover with inspection glass (Ø 400/300 mm) 205323720 429
Inspection glass without centre hole EML 450 / UWL 400 205323584 26
Reduction pieces for test sieves Ø 350 mm-sieves (upper- and 205323775 457
lower part)
Reduction pieces for test sieves Ø 200 mm-sieves (upper- and 205323652 782
lower part)
Inspection glass with centre hole EML 450 / UWL 400 205323645 32
Knurled nut for Classic - System (1 piece) 200551449 119
Knurled nut for HAVER TwinNut - System (1 piece) 208562034 230
Reduction piece made from polyamide to receive a sieve pan with 205323751 210
discharge nozzle Ø 300 mm
Special appliance and clamping system for beechwood frames 205323768 3.204
Wide spreading spray diffuser with socket 205323560 153
PVC-water hose ½“. 3 lin.m 205323225 12
Water plug with socket and 2 hose clipses 205323195 32
Guide rod Classic / HAVER TwinNut 1000 mm (1 piece) 205323669 215
Sound absorbing cupboard for HAVER EML 450/UWL 400 205323515 3.170 With Inspection Certificate
Special appliance for test sieves Ø 450 mm 206515841 1.544 3.1 according to DIN
Sieve pan, Stainless Steel EN 10 204 on request:
Article-No. 206944054
Sieve pan 205922756 157
Sieve pan with discharge nozzle 205922893 263 EURO / piece: 50,00

HAVER & BOECKER

 W.S.TYLER® Test Sieve Shaker

230 Volt, 50 Hertz Article-No. €/Piece

Ro-Tap® RX-29 CE incl. sound absorbing cupboard

for 6 test sieves (200/203x50 mm) or 13 test sieves (200/203x32 mm) 205322655 5.837

Ro-Tap® RX-29-10
for 6 test sieves (200/203x50 mm) or 13 test sieves (200/203x32 mm) 205323089 3.634 Ro-Tap® RX 29-10 /
RX 30-10

Ro-Tap® RX-30 CE incl. sound absorbing cupboard

for 5 test sieves&nbsp; (300/305x50 mm) or 12 test sieves 205322761 6.310
(300/305x32 mm)

Ro-Tap® RX-30-10
for 5 test sieves (300/305x50 mm) or 12 test sieves (300/305x32 mm) 205323119 4.112

Ro-Tap® RX-94 Ro-Tap® RX 29 /

RX 30 (CE)
for 2 x 6 test sieves (200/203x50 mm) or 2 x 12 test sieves 205323126 on request
(200/203x32 mm)

110 V, 50-60 Hertz Article-No. €/Piece

Ro-Tap® RX-29
for 6 test sieves; (200/203x50 mm) or 13 test sieves (200/203x32 mm) 205323096 3.634
Ro-Tap® RX-94

Accessories
IQ/OQ documentation 206769374 270
Inspection Certificate 3.1 acc. to SAEJ 444 206749994 220

Spare parts: see e-shop Particle Analysis

(www.havershop-partikelanalyse.com)

Sound absorbing cupboards

for Test Sieve Shakers

for HAVER Test Sieve Shakers Article-No. €/Piece

Sound absorbing cupboard for EML 200 205323485 1.863
Sound absorbing cupboard for EML 315 206515780 1.936
Sound absorbing cupboard for EML 450/UWL 400 205323515 3.170
for EML 200 / EML 315
for W.S. TYLER® Test Sieve Shakers Article-No. €/Piece
Ro-Tap® RX-29 and RX-30 (Cupboard R-30050) 205323331 1.417
Ro-Tap® RX-94 205323348 2.079

for Ro-Tap®

52 53
 HAVER CSA Software
Evaluation Software for Sieve Analysis

Software Article-No. €/Piece

Evaluation Software HAVER CSA BASIC 206716781 422
Evaluation Software HAVER CSA EXPERT 206716859 703
Evaluation Software HAVER CSA NETWORK 206716866 1.352

You can download the HAVER CSA from our website. To gain insight into the evaluation software
you can test the HAVER CSA NETWORK for 30 days free of charge.

Here you will find further information:

https://www.haverparticleanalysis.com

HAVER UFA Frequency Variation

Ultrasonic Sieving Support for HAVER Test Sieves
System consisting of: Article-No. €/Piece
Analogue generator AGS35-100-230, 50W 205329012 2.788
Clamping ring for Test Sieves Ø 350 mm 205324413 347
Clamping ring for Test Sieves Ø 300 mm 205324420 347
Clamping ring for Test Sieves Ø 203 mm 205324437 242
Clamping ring for Test Sieves Ø 305 mm 205324444 347
Clamping ring for Test Sieves Ø 315 mm 205324451 347 generator and converter
Clamping ring for Test Sieves Ø 400 mm 205324468 416 with clamping ring
Clamping ring for Test Sieves Ø 200 mm 205329005 168
Converter with connecting cable 205328299 933

HAVER CPA Dynamic Image Analyzers

for particle size and shape analysis of bulk materials

HAVER CPA 2-1

Accessories Sieve Shakers

for particles with the measuring range from 20 µm to 30 mm
115 Volt, 50 Hertz 208705868 on request
230 Volt, 50 Hertz 208686891 on request

From standard laboratory equipment with HAVER CPA peripherals to customized in and online
solutions can be found on our website. CPA 2-1
www.haverparticleanalysis.com.

Dynamic Image Analysis

HAVER & BOECKER

 On-Site Quality Assurance

Haver & Boecker is setting new standards – also when it comes

to service
Whether it’s the re-certification of used test sieves, the inspection of your analysis
sieve machines or maintenance and calibration of a HAVER CPA laboratory device,
HAVER on-site service ensures that your measuring equipment goes back into
operation quickly.

For the quality assurance of your test sieves at your site, Haver & Boecker uses a
calibrated screen measuring system for
Certification
Calibration
Certification / calibration as to DIN EN ISO or ASTM

The on-site machine service for your analysis sieve machines comprises different
packages

Small or large machine service for an EML laboratory screening machine

Small or large machine service for a W.S. Tyler Ro-Tap®RX-29
Commissioning and training as to a GMP installation of the screening machine

For your laboratory equipment used for computer-aided particle analysis, the
HAVER on-site service offers

comprehensive maintenance and calibration of HAVER CPA laboratory units

You will find more information about the individual packages and prices in our service
area on our website: www.haverparticleanalysis.com

54 55
 Terms of delivery
Particle Analysis
Germany

Value-added tax 19 % (charged separately)

Delivery EXW Oelde. packing excluded
for consignments within the range exceeding
EURO 1.500 DAP destination. packing excluded
Packing charged separately
Payment 10 days less 2 % discount or 30 days net
Contact Phone: +49 (0) 25 22-30 363

Export

VAT Reg no: DE123928082

Delivery EXW Oelde. packing excluded
Packing charged separately
Payment to be agreed upon
Contact Phone: +49 (0) 25 22-30 131

Minimum order value

Minimum order value 300 €, thereunder we recommend to order via our E-Shop
www.havershop-particleanalysis.com

General Terms and Conditions of Supply and Payment

Our deliveries and services are provided exclusively on the basis of our General Terms
and Conditions of Supply and Payment - Wire Weaving Division - Export. effective as
per 2020-03-01.
These terms can be downloaded from our homepage
http://www.haverboecker.com/en/gtc/ or can be requested from us.

Terms of delivery
 L 70 EN 511 072022 0,05 Fe digi © Haver & Boecker. All rights on any kind of reproduction. in whole or part, reserved.
Photos: Fototeam Walkenhorst

HAVER & BOECKER OHG · Ennigerloher Straße 64 · 59302 OELDE · Germany · Phone: +49-(0)25 22- 30 131
Fax: +49-(0)25 22-30 152 · E-Mail: pa@haverboecker.com · Internet: www.haverparticleanalysis.com

H AVER & B O EC K ER