Air Tube
Air Tube
D257223-1800-SPL-001 01
www.nov.com
Page: 2
REVISION HISTORY
CHANGE DESCRIPTION
Color/Definition Key
Part Numbers in Yellow are not suggested spares to keep on hand and are listed for information only.
A Critical Component is defined as a part whose failure will result in the system no longer functioning.
www.nov.com
Page: 3
TWO YEAR
COMMISSIONING
MATERIALS DATA OPERATIONAL AVAILABILITY
Critical Component
SPARES
SPARES
Recommended
Recommended
Quantity to be
Quantity to be
Kept in Stock
Varco/MDT
Item No.
ordered
ordered
Part Number
NOTE: PRICES AND DELIVERY TIMES SHOWN FOR INFORMATION ONLY. CONTACT NATIONAL OILWELL VARCO FOR CURRENT STATUS.
www.nov.com
Page: 4
Critical Component
SPARES OPERATIONAL SPARES
Recommended
Recommended
Quantity to be
Quantity to be
Kept in Stock
NOV/MDT
Item No.
ordered
ordered
Description of Recommended Spare Parts Item / Reference Number / Where Used
Part Number
NOTE: PRICES AND DELIVERY TIMES SHOWN FOR INFORMATION ONLY. CONTACT NATIONAL OILWELL VARCO FOR CURRENT STATUS.
www.nov.com
Page: 5
TWO YEAR
COMMISSIONING
MATERIALS DATA OPERATIONAL AVAILABILITY
Critical Component
SPARES
SPARES
Recommended
Recommended
Quantity to be
Quantity to be
Kept in Stock
NOV/MDT
Item No.
ordered
ordered
Part Number
Kit, Cabinet, PLC EDS (319 CPU and 343 Advanced) EDS-CSA2600 30176682-003
Electronic Driller PLC Cabinet (319 and 343 Advanced) EDS-CSA2600 40224667-002
PLC Software EDS-CSA2600 40223407
72 UPS, 500VA, 120V, 50-60 Hz In, EPO UPS-1 945210-046 YES
73 Filter, RFI, Power Line, 10A, 120Vac RFI Filter 901500-012 YES
74 Ethernet SW, 5 Port, 10/100, 24V ESW-1 942922-004 1 YES YES
Outlet, Utility, Dual, 15A, Din Rail Utility Outlet 959014-001
75 Power Supply, 5A, 24Vdc, S7-300 PS1 930604-021 1 1 YES YES
76 Power Supply, 2A, 24Vdc, 120/230 Vac PS2 930604-554 1 YES YES
77 Circuit Breaker, 2P, 20A, 480V CB1 938808-002 YES YES
78 Circuit Breaker, 1P, 4A, 277Vac CB4 and CB5 938808-101 YES YES
79 Circuit Breaker, 2P, 2A, 480V CB2 938808-006 YES YES
80 Circuit Breaker, 1P, 10A, 480Vac CB3 938808-105 YES YES
81 Fan, Cooling, 115Vac, 4", 55CFM F-1 955249-9003 1 YES YES
82 Sitch, Contact Black, 25A, 600V, 3P SW-1 932312-415 YES
83 Switch, Sel Handle, NEMA 1, IP54 SW-1 932312-500 YES
84 Contact Block, 1 NC, XB2 B SW-2 932504-034 YES
85 Key Switch, 3 N.O., 2-Pos Main. SW-2 118839-36-G4-16 YES
86 COMPONENT PLUG,EMPTY,2-P,TYP 2 Resistor Module 951511-9251 YES YES
87 Barrier, I.S., 5Vdc, 100mA, 500 ohm ISB4-1 951539-008 1 YES
88 MDL, Power Feed, RPI System ISB-PS 950895-001 YES YES
89 Lamp, MDL, EP, LED-White, LENS-Green PL-1, PL-2 and PL-3 934747-002 YES
90 Barrier, Pot Conv, 24 Vdc ISB1-1, ISB1-2 951540-026 1 1 YES YES
91 Barrier, Transformer I.S., Trans Out ISB4-6, ISB5-1 951540-027 1 1 YES YES
92 Conv, Freq/Cur, Out 0/4-20mA ISB1-FVC 912008-014 1 1 YES YES
93 Isolator, DC, Non-I.S., 4-20mA In B2-FVC 951540-013 (951540-067 - uncalibrated) 1 1 YES
94 Barrier, TIB, In 0-10V, Out 4-20mA NISB1 951540-005 1 YES YES
95 PCB, Throttle Shaper Throttle Shaping Module TSM 40222818-001 1 YES YES
ISB1-6, ISB1-3, ISB3-1, ISB3-2, ISB1-7,
96 Barrier, Zener, 28V, 300 ohms, 50mA 951540-076
ISB4-2, ISB4-3, ISB4-4, ISB4-5 1 1 YES YES
97 Barrier, TIB, Single Channel, Repeater ISB2-1, ISB2-2 951540-091 YES YES
98 Barrier, I.S. Transformer, 24Vdc, 2-Output ISB1-4, ISB1-5 951540-094 1 YES YES
99 Relay, Interface, 1 DPDT, 24Vdc, 31W K1, K2 930319-004 1 YES YES
100 Recifier Bridge Assembly BR1 40223068-001 1
101 PLC, Micro Memory Card, 2MB Memory Card (319 CPU) 930604-662 1 YES
102 CPU, 319-3 PN/DP, S7-300, 1.4kb Rack 0, Slot #2 930604-624 1 YES YES
103 Processor, Communications, CP343-1 IT Advanced Rack 0, Slot #4 930604-626 1 YES YES
104 PLC, Counter Module, FM350-1 Rack 0, Slot #5 930604-029 1 YES YES
105 PLC, Input Module, 8 Analog, 9/12/14 Bit Rack 0, Slot #6 and Rack 0, Slot #11 930604-028 1 YES YES
106 PLC, Output Module, 4 Analogs Rack 0, Slot #7 930604-030 1 YES YES
107 Module, Digital, 16 Inputs, 24Vdc Rack 0, Slot #8 930604-213 1 YES YES
108 PLC, I/O Module, 8 Digital In, 8 Digital Out, 24Vdc, 5mA Rack 0, Slot #9 930604-204 1 YES YES
109 PLC, Input Module, 8 Analog, 16 Bit Rack 0, Slot#10 930604-199 1 YES YES
NOTE: PRICES AND DELIVERY TIMES SHOWN FOR INFORMATION ONLY. CONTACT NATIONAL OILWELL VARCO FOR CURRENT STATUS.
www.nov.com
Page: 6
TWO YEAR
COMMISSIONING
MATERIALS DATA OPERATIONAL AVAILABILITY
Critical Component
SPARES
SPARES
Recommended
Recommended
Quantity to be
Quantity to be
Kept in Stock
NOV/MDT
Item No.
ordered
ordered
Part Number
NOTE: PRICES AND DELIVERY TIMES SHOWN FOR INFORMATION ONLY. CONTACT NATIONAL OILWELL VARCO FOR CURRENT STATUS.
www.nov.com
Page: 7
These kits contain all necessary water jacket coppers, O-rings, hardware, and shaft alignment tool. This kit is design for the repair of a unit that is leaking water due to overheating and is in
otherwise good condition. This kit will require skilled assembly technicians to install the copper on the water jackets. This is best done in a shop environment with appropriate lifting systems and
tools. Each water jacket will take about 4 hours to repair. This kit should NOT be selected if downtime is critical .
These kits contain all the parts included in KIT #1 with the addition of friction material. This kit is designed to be used for the rebuilding of a unit to "like new" condition of all normal wear parts. It
would be appropriate for a unit that has seen significant wear and tear but is in otherwise good condition. This kit will require skilled assembly technicians to install the copper on the water jackets
and replace the friction material on the drive plates. This is best done in a shop environment with appropriate lifting systems and tools. Each water jacket will take about 4 hours to repair. The drive
plates will take about 1 hour each. This kit should NOT be selected if downtime is critical.
LEVEL 3 KITS "Restoration: Assembled Replacement Water Jackets and Drive Plates"
This kit contains completely assembled water jackets and drive plates. It is designed for complete repair of a unit to "like new" condition. It is appropriate for servicing a unit when shop facilities are
not available or downtime is critical. It can be installed by less skilled service people in a minimum of time. This kit is expensive because it replaces many parts that are not considered wear parts.
Any customer who purchases this kit should also purchase a LEVEL 2 kit. The level 2 can be used to service the replaced non-wear parts and will essentially create a LEVEL 3 kit as a spare using
the customers replaced parts. This kit SHOULD be used when downtime is critical.
The parts list below would provide a field service technician with all necessary parts to handle an unexpected situation with one of the brakes. The list contains one completely assembled water
jacket of each style, extra O-rings, a full hardware set for each water jacket, springs, shims, an airtube, pressure plate, and an alignment tool. I would expect to be able to disassemble and
reassemble a brake without being caught short of a part. This assumes the unit is not leaking water. If a unit is leaking water and the copper is damaged, it will be necessary to purchase one of the
full repair kits. The only significant shipping weights are the water jacket assemblies. The center jacket weighs about 650 lbs, the float jacket weighs about 450 lbs, and the alignment tool weigh
about 75 lbs. Figure another 200 to 300 lbs for the rest of the hardware and packing materials.
The rigging & tool kit will comprise of a basic tool kit along with the shackles and lifting jewelry required for safe on site handling and repair
NOTE: PRICES AND DELIVERY TIMES SHOWN FOR INFORMATION ONLY. CONTACT NATIONAL OILWELL VARCO FOR CURRENT STATUS.
www.nov.com