Scribd
Upload
4K views1 page

Error Codes Bravi

The document lists common error codes and descriptions for a TRIONIC model lift truck. It provides a table with the most common errors and their associated error codes, such as low battery flashing BCI or dead battery flashing BAT. Another table provides more detailed error descriptions and their codes, such as functions locked due to being overloaded shown as code 2,2.

Uploaded by

brunosilvaagostinho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views1 page

Error Codes Bravi

The document lists common error codes and descriptions for a TRIONIC model lift truck. It provides a table with the most common errors and their associated error codes, such as low battery flashing BCI or dead battery flashing BAT. Another table provides more detailed error descriptions and their codes, such as functions locked due to being overloaded shown as code 2,2.

Uploaded by

brunosilvaagostinho
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PARTE 10 RICERCA GUASTI

10.3 RISOLUZIONE DEI PROBLEMI E CODICE DI ERRORE (TRIONIC)


MODELLO LUI MINI HD - LUI MINI HD S.I.W./S.I.E.

MOST COMMON ERRORS ERROR CODE


LOW BATTERY FLASH BCI when at LOW BATTERY
DEAD BATTERY FLASH BAT on CAN DISPLAY
BATTERY CHARGING FLASH `2-3
BRAKES Manually Released FLASH`8-2
Trigger Fault FLASH`2-4
Footswitch Fault FLASH`2-5
Drive Joystick Fault FLASH`2-6
Steer Joystick Fault FLASH `2-7
OVERLOAD FLASH `2-8
TILT FLASH `2-9 when elevated
ELEVATION SWITCH FLASH `6.3

ERROR
DECRIPTION CODE
FAULT: BAD P/N 1,1
NOT CALIBRATED 1,1
HEIGHT NOT CALIBRATED 1,1
FUNCTIONS LOCKED - NOT CALIBRATED 1,1
FUNCTIONS LOCKED - TEST MODE SELECTED 2,2
FUNCTIONS LOCKED - POTHOLE 2,2
FUNCTIONS LOCKED - ARMGUARD 2,2
FUNCTIONS LOCKED - OVERLOADED 2,2
FUNCTIONS LOCKED - UNDERLOADED 2,2
FUNCTIONS LOCKED - TOO HIGH 2,2
FUNCTIONS LOCKED - TILTED 2,2
FUNCTIONS LOCKED - EXTERNAL SHUTDOWN 2,2
DRIVE LOCKED - CANNOT STEER 2,2
CHECK GROUND INPUT SWITCHES 2,2
CHECK DRIVE/LIFT SELECT SWITCH 2,2
CHECK JOYSTICK 2,2
RELEASE TRIGGER 2,2
RELEASE GROUND SWITCHES 2,2
RELEASE ROTATE SWITCHES 2,2
RELEASE JOYSTICK SWITCHES 2,2
SHUTDOWN - CHECK EMS SWITCHES 2,1
FAULT: ENERGIZED VALVE - CHECK P9 WIRING 3,2
FAULT: BAD INTERNAL SAFETY OUTPUT 3,4
DRIVE LOCKED - BRAKING 3,4
MOTOR OVERLOAD 3,4
FAULT: CAPBANK VOLTAGE TOO HIGH - CHECK LINE CONT 3,3
FAULT: VALVE FEEDBACK HIGH - CHECK VALVE WIRING 3,2
FUNCTIONS LOCKED - BATTERY 4,4
FAULT: BAD INTERNAL 12V 4,3
FAULT: BAD 5V JOYSTICK SUPPLY - CHECK P15-12 WIRING 4,5
FAULT: BAD INTERNAL 5V 4,2
FAULT: BAD TILT SENSOR 4,2
FAULT: BAD INTERNAL SLAVE 4,2
FUNCTIONS LOCKED - TOO HOT 4,2
FAULT: BATTERY VOLTAGE TOO LOW 4,4
FAULT: BATTERY VOLTAGE TOO HIGH 4,4
FAULT: CHECK ELEVATION SWITCH 6,3
FAULT: CAN BUS 6,6
FAULT: MOTOR A SHORT TO HIGH 7,2
FAULT: MOTOR A SHORT TO LOW 7,3
FAULT: MOTOR B SHORT TO HIGH 7,4
FAULT: MOTOR B SHORT TO LOW 7,6
FAULT: MOTOR CONNECTIONS SHORTED 7,5
FAULT: CAPBANK VOLTAGE TOO LOW - CHECK STUD WIRING 7,7
DRIVE LOCKED - CHECK FIELD CURRENT 7,7
SOME BIG BAD PROBLEM 9,9
BRAKES MANUALLY RELEASED 8,2

10.79 05 -2015 Rev.1

You might also like