Scribd
Upload
378 views1 page

Ceramol 258g 2 - en TR

The document provides product information for CERAMOL 258G/2, a water based coating for foundry applications. It contains zirconium silicate and prevents metal and slag adherence to crucibles and ladles, increasing their lifespan. The coating is ready to use but can be diluted and should be applied below 100°C to receptacles that are completely dry before use.

Uploaded by

SüleymanŞentürk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
378 views1 page

Ceramol 258g 2 - en TR

The document provides product information for CERAMOL 258G/2, a water based coating for foundry applications. It contains zirconium silicate and prevents metal and slag adherence to crucibles and ladles, increasing their lifespan. The coating is ready to use but can be diluted and should be applied below 100°C to receptacles that are completely dry before use.

Uploaded by

SüleymanŞentürk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Revision No: 001

Date: 12/12

Non Ferrous Foundry

Product Datasheet - Coatings

CERAMOL* 258G/2
A water based coating
Product Description CERAMOL 258G/2 is a water based coating containing zirconium silicate base and other
special additions.

Benefits These special additions prevent the adherence of metal and slag to the crucible or ladle as far
as is possible. The effect of this is to increase the life of the crucible or ladle lining and help to
ensure a clean receptacle for the molten metal.

Application CERAMOL 258G/2 is ready for use but may be further diluted with water if required. It is
recommended to apply by swab or brush, to the receptacle having a temperature of less than
100°C, to ensure sufficient bonding of the coating to substrate. Repeated application to reach
a thicker coating layer is possible but not absolutely necessary.

Drying:
Before filling the receptacle with molten metal it should be guaranteed that the receptacle is
completely dry; otherwise risk of accidents exists.

Technical Data Viscosity when delivered ca. 95° Bé


Settling after 24 hrs max. 2%
Density: 2.6 kg/l
Colour: beige

Packaging Drums of 40 kgs

Storage & Shelf Life Store in a frost-free and dry place. Keep containers closed. Stir up well before use. After
delivery maximum storage time approx. 6 months.

Health & Safety See Safety Data Sheet, copies of which are available on request.

Further Remarks For safety reasons the product mentioned above must only be used according to these
application guidelines. The data provided above is for guidance only and does not represent a
specification. All rights to make technical changes to improve the product are reserved.

Foseco Türkiye, Vesuvius Gebze Organize Sanayi Bölgesi • 1000. Cadde No:1022 • 41420 Çayırova - Kocaeli
Istanbul Refr. San.ve Tic. A.Ş. Tel.: +90 (0) 262 677 10 50 • Fax: +90 (0) 262 677 10 60 • www.foseco.com.tr
CERAMOL* 258G/2 * Foseco, its logo and CERAMOL are trade marks of the Vesuvius Group, registered in certain countries, used under licence.
Page 1 of 1

You might also like