Manifolds Title HereValves and Manifolds

Instrumentation
PREMIER Range
H Series Product Range
Contents

Introduction................................................................................................................................. 5
General Technical Information.................................................................................................... 6
Design and Materials .................................................................................................................. 6
Connections................................................................................................................................. 7
Further Constructional Details, Features and Benefits.............................................................. 8
Available Options......................................................................................................................... 9
Hand Valves - HNV Series............................................................................................................ 10
Hand Valves - HNAV Series.......................................................................................................... 11
Gauge Valves - HNVV Series........................................................................................................ 11
Gauge Valves - HGV Series.......................................................................................................... 12
2 Valve Manifolds - HL Series...................................................................................................... 12
Remote/Line mount - short pattern............................................................................................. 12
2 Valve Manifolds - HNL Series.................................................................................................... 14
Remote/Line mount - long pattern.............................................................................................. 14
3 & 5 Valve Manifolds - HL Series................................................................................................ 15
Remote/Line mount, Pipe to pipe, Thread to thread..................................................................... 15
2, 3 & 5 Valve Manifolds - HD & HE Series................................................................................... 16
Direct mount.............................................................................................................................. 16
2, 3 & 5 Valve Manifolds for 2051/3051 CoplanarTM Transmitters.............................................. 21
Mounting Brackets...................................................................................................................... 23
Brackets for remote/line mount manifolds and gauge valves........................................................ 23
Brackets for direct mount manifolds............................................................................................ 25
Brackets for 2051/3051 CoplanarTM transmitter manifolds............................................................ 27

3
 Instrumentation
Valves and Manifolds
for All Industries
PREMIER and Applications

4
Introduction
Welcome to the Parker PREMIER range of process The top five target markets for Parker Instrumentation are listed
instrumentation valves and manifolds, designed for below, although Parker PREMIER valves and manifolds are
instrumentation measurement applications. The‘core’ PREMIER suitable for a wide range of process measurement and control
range represents the pinnacle of our product offerings, building applications in various industries.
upon the well-known and highly regarded H series. We strive to Please note that continuous product development may require
provide exceptional value to our customers, offering the best occasional changes in the details provided in this catalogue.
market lead times and unparalleled quality. Parker reserves the right to make such changes at their discretion
You can make your selections directly from the following pages, and without prior notice. All dimensions shown in this catalogue
and rest assured that we will meet even the highest expectations are approximate and subject to change.
in terms of service and support. While we strive to provide sufficient, clear, and accurate
information to assist you in selecting the right product from this
catalogue, it is ultimately the responsibility of the system designer
Choosing PREMIER ensures: or user to ensure that the chosen product is suitable for the
P Premium design and quality at non-premium pricing intended application. If you require further information, please
don’t hesitate to contact your local Parker support.
R Rapid service response and unbeatable market lead times
Engineered for longevity, ensuring the lowest total cost of With thousands of distributor outlets and stores worldwide, as
E ownership well as hundreds of Parker personnel and locations, we offer the
PREMIER advantage of local supply and support in your area.
M  anufacturing: State-of-the-art UK manufacturing with
M
advanced production planning
I Inspired continuous innovation and process improvement
E Exceptional ‘self-serve’ programs, backed by dedicated
divisional support if needed
R Reliable products, processes, and people.

Upstream Oil & Gas Downstream Oil & Gas PowerGen Industrial Gas Transportation

Parker EHS Vision Statement:

Parker recognizes, and believes, in the importance of safeguarding natural resources and the global
environment. We are committed to our employees, our communities, and our customers: their health, safety
and understanding of the need for environmental stewardship.
We are committed to the concept of continuous improvement in environmental performance. Accordingly,
we are committed to the following principles:

PREMIER
• We will seek to comply with environmental, health, and safety laws worldwide.
• We strive to minimize or eliminate the generation of waste.
• We will monitor compliance with environmental, health and safety regulations.

5
General Technical Information
Design and Materials
All PREMIER valves and manifolds are designed to meet the pressure and temperature ratings of ANSI B16.34 Class 2500/Class 4500 as
applicable, limited only by selection of gland packing materials. Conformity to the recommendations of MSS SP-99 is also assured.

Relevant codes, standards and specifications

Code/Specification Description
DIN EN61518/IEC 61518 Mating interface dimensions for manifolds to transmitters
ASME B16.34 Valves-flanged, threaded and welding end
NACE MR0175 / ISO 15156 Materials for use in H2S containing environments - Oil and Gas processing
API 598 Valves inspection and testing
ISO 5208 Pressure testing of metallic industrial valves
MSS-SP25 Standard marking systems
MSS SP61 Pressure testing of valves
MSS SP 99 Instrument valves

Body/bonnet material options

Material Group Designator UNS No. Werksoff No. Euronorm Equiv. ASTM
316/316L Dual
Austenitic SS UNS S31600/31603 1.4401/1.4404 X5CrNiMo17-12-2 A479 Gr 316
Certified
Super Austenitic SS 6Mo UNS S31254 1.4547 X1CrNiMoCuN20-18-7 A479/A276

Standard specification details

Optional Specification-
Standard Specification See following pages
Seat orifice diameter: 4mm N/A
Flow co-efficient (Cv): 0.35 N/A
Metal to metal valve seat and stem tip PEEK soft tip available
All valves and manifolds are subjected to hydrostatic pressure at 1.1x maximum working pressure for
N/A
the seat, and 1.5x maximum working pressure for the shell
All products are supplied in clean, burr-free and grease-free condition, making them suitable for most
N/A
liquid and gaseous applications
Body and bonnet are fully traceable to the original material source, with a unique trace code applied to
N/A
the bar stock material
Certification according to BS EN 10204 3.1 for material and pressure testing is available for download N/A
All products are permanently marked. Manifolds include a line diagram describing the flow paths N/A
Complementary to the marking, all bonnet assemblies are functionally colour-coded by the dust caps N/A
Number of turns open to close: 3.5 N/A
Gauge valves and manifolds do not include plugs as standard Various plugs available
Direct mount manifolds include flange face seals and high tensile, zinc plated carbon steel mounting
316 SS bolts available
bolts
Hand valves do not include mounting holes or threads Panel Mount available
All manifolds include mounting holes suitable for brackets or enclosure mounting Brackets available

6
Connections
Introduction
Parker PREMIER valve and manifold products are available in a carefully selected array of connection types and sizes. These products
are manufactured to the highest quality standards, utilising state-of-the-art machinery and processes, and are backed by decades of
expertise.
The specific connections available are detailed in the following pages, categorised by product type. Some general information is provided
below for your reference. Please note, no other options are available other than those stated/shown.

Tapered Pipe Threads - Male and Female

NPT Tapered Thread conforming to ASME B1.20.1 with enhanced manufacturing tolerance for optimal assembly and
inspected by three step gauging with Parker enhanced tolerancing to ANPT requirement per ASTM SAE AS71051.

Fully Integrated Tubing Connections

The PREMIER Parker Advantage offers the ultimate in safety, reliability, speed, and ease of installation. A select
number of valves are available with integral tube connections, utilising Parker A-LOK® (Two Ferrule) compression
fitting technology. For full details on the A-LOK® technology, please refer to catalogue reference 4190-FMTG.

Manifold process inlet/instrument outlet Transmitter INTERFACE DIN EN61518/IEC 61518

Parker PREMIER manifolds have inlet and outlet interface connections that fully comply with DIN/IEC 61518. For the Manifold to Transmitter
interface, the type B connection is utilised. According to DIN/EN 61518, the manifold-transmitter interface is rated for a maximum
allowable working pressure of 413 bar (6,000 psi) and a maximum allowable temperature of 120°C (248°F) for liquids gas, or vapours. The
maximum allowable temperature of 120°C (248°F) considers the requirement that manifolds and transmitters need to be protected from
excessive heating by hot media. This requirement can be achieved by using adequate hook-ups or instrument impulse lines of sufficient
length. However, Parker confirms that H series manifolds can be used for temperatures up to 538°C (1,000°F) with graphite gland packing,
and up to 260°C (500°F) with PTFE gland packing.

Process inlet to manifold / transmitter interface Process outlet to transmitter interface

DIN EN 61518 / IEC 61518 DIN EN 61518 / IEC 61518 Type B
54.0 0.3
54.0±0.3 54.0 0.1
� + 0.2
≥15.0
15.0 � ø11.8
11.8 -
-0.0
0.0

20.65±0.2
20.65 0.2 20.65 0.1
20.65±0.1
++0.3 ++0.0
19.9 +0.0
0.3 + 0.0 0.0
18.5 -
ø18.5 41.3 0.2
41.3±0.2 41.3 0.2
41.3±0.2 ø19.9 25.5 -
0.1 ø25.5
--0.1 0.1
0.0 -0.1
-0.0

1)

+0.1
+ 0.1
2.0
2.0- 0.0
++0.5
0.5 -0.0
2.5
2.5- 0.0
-0.0

1) Threaded option for transmitters - plug/vent valve

IEC 61518 Type B
Maximum allowable working pressure 413 bar (6,000 PSI)
PTFE: -10OC to +80OC Graphite: -40OC to +120OC
Temperature range
(14OF to 176OF) (-40OF to 248OF)
Flat Ring 25.4 x 20 x 2.7 Flat Ring 25.4 x 19.9 x 2.9
Seal ring
Material: PTFE Material: Graphite
N=Minimum thread engagement 9mm 9mm
Replacement seal part number HIEC001-PTFE/1 HIEC001-GRAPHITE/1
Important Note: the only exception to the IEC 61518 standard is for the Emerson Coplanar transmitter design. Parker offers a full range of
TM

specifically suitable manifolds for this type. See pages 21-22.

7
Further Constructional Details, Features and Benefits
ANSI Class 2500 (6,000 PSI) and Class 4500 (10,000 PSI) offering safe, reliable and repeatable performance

Item Description
1 Ergonomic ‘T’ bar style handle with positive
1
retention
Dual purpose dust cap provides functional
2 2
identification
3
3 Compensatory adjustable gland
4
4 Secure anti-vibration gland lock nut
7 6 5 Anti-blowout low torque back seating stem
5 6 All metal body bonnet seal
Gland thrust bush ensures uniform packing
7
compression and tight sealing
Annealed sealing washer guarantees 100%
8
sealing assurance
Self-centering, non-rotating stem tip guarantees
9
bubble tight shut-off
Material traceability for major pressure
10
containing components
8 9 10

Pressure vs temperature
Pressure
PSI (bar)
Reference Description
10,000 A A-A Graphite packing
(690)
A-B PTFE packing
8,000
(552)

6,000
(413) Notes:
4,000
(275)
• Pressure and temperature ratings shown are maximum
possible values. Continuous operation at the maximum
2,000 ratings will reduce life expectancy.
(138)
• Pressure and temperature ratings can be derated by certain
B A
0 connection types or materials of construction.
Temperature
0 100 200 300 400 500 °C (°F)
(32) (212) (392) (572) (752) (932)

8
Available Options
Panel Mount (PM) – Hand valves only. Available factory fit or separately for Retro Fit.
Hole
26mm (1.02”)
Diameter
Factory Fitted PM
Option Suffix Panel Max. 5mm (0.20”)
Thickness Min. 2.3mm (0.09”)
Retrofit Kit KITPM
Part Number Min. distance
for panel mount 51mm (2.00”)
spacing

PEEK Soft Tip Bonnet Design (PK) Pressure vs temperature

Pressure
PSI (bar)

• Ideal for clean gaseous or other services where bubble-tight 10,000

(690)
shut-off with minimum effort is required
• Suitable for temperatures up to 204oC and pressures up to 8,000
(552)
10,000 PSI at reduced temperature, as per graph. 6,000
(413)

4,000
(275)

Anti-Tamper Operation - to vents/drains and/or equalise only. Available separately or with 2,000
(138)

Manifold, with or without Key - as per table ONLY. 0

Temperature
Supplied separately - 0 100 200 300 400 500 °C (°F)
Supplied with Valve - Option Suffix (32) (212) (392) (572) (752) (932)
Option Suffix
To vent - ATKV
With Key To equalise - ATKE KITAK
To equalise & vent - ATKEV
To vent - ATV
Without Key To equalise - ATVE KITAT
To equalise & vent - ATE

Blank Plugs (P), Bleed Plugs (BV) or both as applicable (PBV). Also available separately.
Supplied with Valve - Option Suffix Plug Bleed Plug
P (Plug) Size/Material 316 SS 6MO 316 SS 6MO
BV (Bleed plug) ¼” NPT HPHS4M HPH6MO4M HBVS4M HBV6MO4M
PBV (Plug & Bleed plug) ½” NPT HPHS8M HPH6MO8M HBVS8M HBV6MO8M

Part Nomenclature and Creation – Important

Throughout this catalogue, we have outlined all the PREMIER products and options that are available. To aid the user, we have included
top-level part numbers for all available products, sorted by type. We have also provided a list of available options, along with examples of
how these options impact the part numbers. There are no other options available with this PREMIER range.
It is IMPERATIVE to adhere to the correct nomenclature and sequencing for this nomenclature. The following breakdown will assist users
in validating their selections against the included examples.
Please note: not all options are compatible with every basic product type. Some options cannot be combined. For instance, the PEEK
soft tip and Graphite packing cannot be used together in any product type. Care should be taken to follow the guidelines provided in the
catalogue.
OPTIONS
As applicable. Please refer to detailed information on individual product pages.
PREMIER Graphite Plugs
SS Transmitter Anti-Tamper Mounting
Part Number High Pressure (High Temperature) PEEK Soft Tip (Blank or/and Panel Mount NACE
Mounting Bolts Operation Brackets
(Default) Packing Bleed)
HNV*8FF HP N/A N/A PK N/A N/A PM N/A NC
HNVV*8M8F HP N/A 3 N/A BV N/A N/A N/A NC
EXAMPLES

HGV*8M8F HP N/A N/A PK PBV N/A N/A N/A NC

HNL*2V8M8F4F HP N/A 3 N/A P ATV N/A BK NC
HD*3MA N/A SB 3 N/A N/A ATE N/A BKS NC
HD*5MA N/A SB N/A PK P ATKEV N/A BK NC

* Material designator: S - 316 stainless steel; 6MO - super austenitic stainless steel. Only two available material options.

9
Hand Valves - HNV Series
With a small bore and a needle/plug stem tip, Parker PREMIER hand valves allow precise regulation of flow in low-flow applications for a wide
variety of media. These hand valves are widely used in situations where the flow must be gradually brought to a halt and in other instances where
precise adjustments of flow are necessary.

Fully integrated tubing connections - 6,000 PSI max

Incorporating Parker globally renowned A-LOK® tube fittings technology. Please also refer to Parker Fittings, Materials and Tubing Selection Guide ref. 4190-FMTG.
AVAILABLE PREMIER SELECTION
Material Inlet Outlet Dimension
Option
Stainless Steel 6MO A-LOK® A-LOK® A B C
mm (inch) mm (inch) mm (inch)
HNVS4A HNV6MO4A 1/4” 1/4” PTFE gland 67.5 (2.66”) 25.4 (1.00”) 76.2 (3.00”)
HNVS8A HNV6MO8A 1/2” 1/2” PTFE gland 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)
HNVSM6A HNV6MOM6A 6mm 6mm PTFE gland 67.5 (2.66”) 25.4 (1.00”) 76.2 (3.00”)
C
C
HNVSM12A HNV6MOM12A 12mm 12mm PTFE gland 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)
HNVS4A3 HNV6MO4A3 1/4” 1/4” Graphite gland 67.5 (2.66”) 25.4 (1.00”) 76.2 (3.00”)
HNVS8A3 HNV6MO8A3 1/2” 1/2” Graphite gland 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)
HNVSM6A3 HNV6MOM6A3 6mm 6mm Graphite gland 67.5 (2.66”) 25.4 (1.00”) 76.2 (3.00”)
AA B
B HNVSM12A3 HNV6MOM12A3 12mm 12mm Graphite gland 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)
HNVS4APK HNV6MO4APK 1/4” 1/4” PEEK tip 67.5 (2.66”) 25.4 (1.00”) 76.2 (3.00”)
Note: Thinner wall tube selections will down rate the assembly. HNVS8APK HNV6MO8APK 1/2” 1/2” PEEK tip 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)
Refer to catalogue 4190-FMTG. HNVSM6APK HNV6MOM6APK 6mm 6mm PEEK tip 67.5 (2.66”) 25.4 (1.00”) 76.2 (3.00”)
HNVSM12APK HNV6MOM12APK 12mm 12mm PEEK tip 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)

Female x Female NPT threaded connections - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Inlet Outlet Dimension
Pressure
Option
PSIg A B C
Stainless Steel 6MO Female Female mm (inch) mm (inch) mm (inch)
HNVS4FF HNV6MO4FF 1/4” NPT 1/4” NPT PTFE gland 54.0 (2.13”) 28.6 (1.13”) 79.4 (3.13”)
6,000
HNVS8FF HNV6MO8FF 1/2” NPT 1/2” NPT PTFE gland 63.5 (2.50”) 28.6 (1.13”) 79.4 (3.13”)
HNVS4FFHP HNV6MO4FFHP 1/4” NPT 1/4“ NPT PTFE gland 60.5 (2.38”) 31.8 (1.25”) 82.6 (3.25”)
10,000
 HNVS8FFHP HNV6MO8FFHP 1/2” NPT 1/2” NPT PTFE gland 69.9 (2.75”) 31.8 (1.25”) 82.6 (3.25”)
C
HNVS4FF3 HNV6MO4FF3 1/4” NPT 1/4” NPT Graphite gland 54.0 (2.13”) 28.6 (1.13”) 79.4 (3.13”)
6,000
HNVS8FF3 HNV6MO8FF3 1/2” NPT 1/2” NPT Graphite gland 63.5 (2.50”) 28.6 (1.13”) 79.4 (3.13”))
HNVS4FFHP3 HNV6MO4FFHP3 1/4” NPT 1/4“ NPT Graphite gland 60.5 (2.38”) 31.8 (1.25”) 82.6 (3.25”)
10,000
HNVS8FFHP3 HNV6MO8FFHP3 1/2” NPT 1/2” NPT Graphite gland 69.9 (2.75”) 31.8 (1.25”) 82.6 (3.25”)
A B HNVS4FFPK HNV6MO4FFPK 1/4” NPT 1/4” NPT PEEK tip 54.0 (2.13”) 28.6 (1.13”) 79.4 (3.13”)
6,000
HNVS8FFPK HNV6MO8FFPK 1/2” NPT 1/2” NPT PEEK tip 63.5 (2.50”) 28.6 (1.13”) 79.4 (3.13”)
HNVS4FFHPPK HNV6MO4FFHPPK 1/4” NPT 1/4“ NPT PEEK tip 60.5 (2.38”) 31.8 (1.25”) 82.6 (3.25”)
10,000
HNVS8FFHPPK HNV6MO8FFHPPK 1/2” NPT 1/2” NPT PEEK tip 69.9 (2.75”) 31.8 (1.25”) 82.6 (3.25”)

Male x Female NPT threaded connections - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Inlet Outlet Dimension
Pressure
Option
PSIg A B C
Stainless Steel 6MO Male Female mm (inch) mm (inch) mm (inch)
HNVS8M8F HNV6MO8M8F 6,000 1/2” NPT 1/2” NPT PTFE gland 73.0 (2.87”) 28.6 (1.13”) 79.4 (3.13”)
HNVS8M8FHP HNVS8M8FHP 10,000 1/2” NPT 1/2” NPT PTFE gland 76.2 (3.00”) 31.8 (1.25”) 82.6 (3.25”)

C HNVS8M8F3 HNV6MO8M8F3 6,000 1/2” NPT 1/2” NPT Graphite gland 73.0 (2.87”) 28.6 (1.13”) 79.4 (3.13”)
HNVS8M8FHP3 HNVS8M8FHP3 10,000 1/2” NPT 1/2” NPT Graphite gland 76.2 (3.00”) 31.8 (1.25”) 82.6 (3.25”)
HNVS8M8FPK HNV6MO8M8FPK 6,000 1/2” NPT 1/2” NPT PEEK tip 73.0 (2.87”) 28.6 (1.13”) 79.4 (3.13”)
HNVS8M8FHPPK HNVS8M8FHPPK 10,000 1/2” NPT 1/2” NPT PEEK tip 76.2 (3.00”) 31.8 (1.25”) 82.6 (3.25”)
A
 B


NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

Examples – How to specify the available options

Panel Mount (PM) - For full details, see page 9. NACE MR0175 ISO15156 (NC) – For full details, see page 6.
Add suffix PM within the part number, for example: Add suffix NC within the part number, for example:
HNVS4APM HNVS4APMNC
HNV6MOM12APM HNV6MOM12APMNC
HNV8FFHP3PM HNV8M8F3PMNC

Example – 10K PSI with PEEK tip, Panel Mount and NACE: HNV8FFHPPKPMNC

10
Hand Valves - HNAV Series
These Parker PREMIER angle pattern hand valves have all the advantages of straight pattern hand valves, with the added benefit of reducing
componentry, installation time, cost, and potential emissions. They can also be used to create a change of direction in the tubing hookup without
the need for additional tubes and elbow fittings.
Female x Female 1/2” NPT threaded connections - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C

HNAVS8FF HNAV6MO8FF 6,000 PTFE Std Hard 54.3 (2.14) 28.6 (1.13) 101.0 (3.98)

HNAVS8FF3 HNAV6MO8FF3 6,000 Graphite Std Hard 54.3 (2.14) 28.6 (1.13) 101.0 (3.98)
HNAVS8FFPK HNAV6MO8FFPK 6,000 PTFE PEEK Tip 54.3 (2.14) 28.6 (1.13) 101.0 (3.98)
HNAVS8FFHPPK HNAV6MO8FFHPPK 10,000 PTFE PEEK Tip 76.2 (3.00”) 25.4 (1.00”) 76.2 (3.00”)

 

Male x Female 1/2” NPT threaded connections - 6,000 PSI (414 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C

HNAVS8M8F HNAV6MO8M8F 6,000 PTFE Std Hard 54.3 (2.14) 30.1 (1.19) 102.2 (4.02)
HNAVS8M8F3 HNAV6MO8M8F3 6,000 Graphite Std Hard 54.3 (2.14) 30.1 (1.19) 102.2 (4.02)
CC C

HNAVS8M8FPK HNAV6MO8M8FPK 6,000 PTFE PEEK Tip 54.3 (2.14) 30.1 (1.19) 102.2 (4.02)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

A A
A BB B

Examples – How to specify the available options

Panel Mount (PM) - For full details, see page 9. NACE MR0175 ISO15156 (NC) – For full details, see page 6.
Add the suffix PM within the part number, for example: Add the suffix NC within the part number, for example:
HNAVS8M8FPM HNAVS8M8FPMNC
HNAVS8M8FPKPM HNV6MO8M8FPKPMNC
HNAV6MO8M8FPM

Example – PEEK tip, Panel Mount and NACE: HNAV6MO8M8FPKPMNC

Gauge Valves - HNVV Series

Generally used in conjunction with the measuring instrument, these PREMIER single block gauge vent valves allow for the venting and draining of
any process media that may be trapped following the isolation of the instrument for maintenance and/or removal purposes.

Male x Female 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C

HNVVS8M8F HNVV6MO8M8F 6,000 PTFE Std Hard 85.8 (3.38) 28.6 (1.13) 79.4 (3.13

C
HNVVS8M8FHP HNVV6MO8M8FHP 10,000 PTFE Std Hard 85.6 (3.37) 31.8 (1.25) 82.6 (3.25)
HNVVS8M8F3 HNVV6MO8M8F3 6,000 Graphite Std Hard 85.8 (3.38) 28.6 (1.13) 79.4 (3.13
HNVVS8M8FHP3 HNVV6MO8M8FHP3 10,000 Graphite Std Hard 85.6 (3.37) 31.8 (1.25) 82.6 (3.25)
A B HNVVS8M8FPK HNVV6MO8M8FPK 6,000 PTFE PEEK Tip 85.8 (3.38) 28.6 (1.13) 79.4 (3.13)
HNVVS8M8FHPPK HNVV6MO8M8FHPPK 10,000 PTFE PEEK Tip 85.6 (3.37) 31.8 (1.25) 82.6 (3.25)

Examples – How to specify the available options

¼” NPT Blank Plug (P) or Bleed Plug (BV) - For full details, see page 9. NACE MR0175 ISO15156 (NC) – For full details, see page 6.
Add the suffix P or BV within the part number, for example: Add the suffix NC within the part number, for example:
HNVVS8M8FP HNVVS8M8FPNC
HNVV6MO8M8FHPBV HNVV6M08M8FHPBVNC
HNVVS8M8FHP3P HNVV8M8FHP3NC

Example – 10K PSI, PEEK tip, Bleed plug and NACE: HNVV6MO8M8FHPPKBVNC

11
Gauge Valves - HGV Series
Also generally used in conjunction with measuring instruments, these multi-port PREMIER single block gauge valves allow for flexibility in use
when two instruments may be required. They also offer the function of venting and draining any process media that may be trapped following the
isolation of an instrument for maintenance, calibration, or removal purposes.

Male x Female 1/2” NPT threaded connections with 3 outlets - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C

HGVS8M8F HGV6MO8M8F 6,000 PTFE Std Hard 92.0 (3.82) 28.6 (1.13) 79.4 (3.13)

C
HGVVS8M8FHP HGVV6MO8M8FHP 10,000 PTFE Std Hard 92.0 (3.82) 31.8 (1.25) 81.9 (3.22)
HGVS8M8F3 HGV6MO8M8F3 6,000 Graphite Std Hard 92.0 (3.82) 28.6 (1.13) 79.4 (3.13)
HGVVS8M8FHP3 HGVV6MO8M8FHP3 10,000 Graphite Std Hard 92.0 (3.82) 31.8 (1.25) 81.9 (3.22)
A B
HGVVS8M8FPK HGV6MO8M8FPK 6,000 PTFE PEEK Tip 92.0 (3.82) 28.6 (1.13) 79.4 (3.13)
 

HGVVS8M8FHPPK HGVV6MO8M8FHPPK 10,000 PTFE PEEK Tip 92.0 (3.82) 31.8 (1.25) 81.9 (3.22)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

Examples – How to specify the available options

½” NPT Blank Plug (P) or Bleed Plug (BV) or both - For full details, see page NACE MR0175 ISO15156 (NC) – For full details, see page 6.
9.
Add the suffix NC within the part number, for example:
Add the suffix P or BV within the part number, for example: HGVS8M8FPNC
HGVS8M8FP HGV6M08M8FHPBVNC
HGV6MO8M8FHPBV HGVS8M8FHP3BVNC
HGVS8M8FHP3P

Example – 10K PSI, PEEK tip, Plug, Bleed plug and NACE: HGVS6MO8M8FHPPKPBVNC

2 Valve Manifolds - HL Series Instrument

Remote/line mount - short pattern

Combining two needle valves into one unitised block, these PREMIER Parker 2-valve manifolds are also referred to as
Block and Bleed, Isolate and Calibrate, or even Isolate and Vent/Drain. These manifolds are primarily used in applications
requiring a pressure switch, pressure transmitter, or gauge for Static Pressure Measurement. Other forms of sensing
technology can be applied, and in some circumstances, they can also be employed in the measurement of temperature
or other process attribute. These short-pattern variants are particularly ideal for robust mounting to brackets or other Bleed/Test Process

structures, whilst the angle pattern version ensures ease of use in confined spaces.

Male/Female x Female 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D

D
HLS2V D
HL6MO2V 6,000 PTFE Std Hard 50.8 (2.00) 152.4 (6.00) 28.6 (1.13) 63.5 (2.5)
HLS2VHP HL6MO2VHP 10,000 PTFE Std Hard 50.8 (2.00) 152.4 (6.00) 31.8 (1.25) 69.8 (2.75)
HLS2V3 HL6MO2V3 6,000 Graphite Std Hard 50.8 (2.00) 152.4 (6.00) 28.6 (1.13) 63.5 (2.5)
AA
HLS2VHP3 HL6MO2VHP3 10,000 Graphite Std Hard 50.8 (2.00) 152.4 (6.00) 31.8 (1.25) 69.8 (2.75)
A C C

B BB
HLS2VPK HL6MO2VPK 6,000 PTFE PEEK Tip 50.8 (2.00) 152.4 (6.00) 28.6 (1.13) 63.5 (2.5)
HLS2VHPPK HL6MO2VHPPK 10,000 PTFE PEEK Tip 50.8 (2.00) 152.4 (6.00) 31.8 (1.25) 69.8 (2.75)

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D

HLS2V8M8F4F
D
HL6MO2V8M8F4F 6,000 PTFE Std Hard 50.8 (2.00) 152.4 (6.00) 28.6 (1.13) 73 (2.88)
D
D
HLS2V8M8F4FHP HL6MO2V8M8F4FHP 10,000 PTFE Std Hard 50.8 (2.00) 152.4 (6.00) 31.8 (1.25) 76.2 (3.00)
HLS2V8M8F4F3 HL6MO2V8M8F4F3 6,000 Graphite Std Hard 50.8 (2.00) 152.4 (6.00) 28.6 (1.13) 73 (2.88)
A
HLS2V8M8F4FHP3 HL6MO2V8M8F4FHP3 10,000 Graphite Std Hard 50.8 (2.00) 152.4 (6.00) 31.8 (1.25) 76.2 (3.00)
A C

A B
B C
C
HLS2V8M8F4FPK HL6MO2V8M8F4FPK 6,000 PTFE PEEK Tip 50.8 (2.00) 152.4 (6.00) 28.6 (1.13) 73 (2.88)
B
HLS2V8M8F4FHPPK HL6MO2V8M8F4FHPPK 10,000 PTFE PEEK Tip 50.8 (2.00) 152.4 (6.00) 31.8 (1.25) 76.2 (3.00)

12
 Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

D
D HALS2V D HAL6MO2V 6,000 PTFE Std Hard 50.8 (2.00) 100.5 (3.96) 28.6 (1.13) 63.5 (2.50) 79.4 (3.13)
HALS2VHP HAL6MO2VHP 10,000 PTFE Std Hard 63.5 (2.50) 114.3 (4.5) 31.8 (1.25) 69.8 (2.75) 82.6 (3.25)
HALS2V3 HAL6MO2V3 6,000 Graphite Std Hard 50.8 (2.00) 100.5 (3.96) 28.6 (1.13) 63.5 (2.50) 79.4 (3.13)
A A
A C
C C

HALS2VHP3 HAL6MO2VHP3 10,000 Graphite Std Hard 63.5 (2.50) 114.3 (4.5) 31.8 (1.25) 69.8 (2.75) 82.6 (3.25)
B B
B EE E

HALS2VPK HAL6MO2VPK 6,000 PTFE PEEK Tip 50.8 (2.00) 100.5 (3.96) 28.6 (1.13) 63.5 (2.50) 79.4 (3.13)
HALS2VHPPK HAL6MO2VHPPK 10,000 PTFE PEEK Tip 63.5 (2.50) 114.3 (4.5) 31.8 (1.25) 69.8 (2.75) 82.6 (3.25)

OPTION — Double Block & Bleed Female x Female 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or
10,000 (414 Bar or 690 Bar) for double isolation in the most critical applications. Ideal for on panel or robust bracket
mounting.
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Instrument Stainless Steel 6MO PSIg Gland Tip A B C D E

HLS3DBB HL6MOSDBB 6,000 PTFE Std Hard 88.9 (3.50) 148.3 (5.84) 28.6 (1.13) 50.8 (2.00) 101.6 (4.00)
EE E

DD
HLS3DBBHPD
HL6MO3DBBHP 10,000 PTFE Std Hard 88.9 (3.50) 148.3 (5.84) 31.8 (1.25) 57.2 (2.75) 107.7 (4.25)
HLS3DBB3 HL6MO3DBB3 6,000 Graphite Std Hard 88.9 (3.50) 148.3 (5.84) 28.6 (1.13) 50.8 (2.00) 101.6 (4.00)
A
AA CC C

Bleed/Test Process B BB HLS3DBBHP3 HL6MO3DBBHP3 10,000 Graphite Std Hard 88.9 (3.50) 148.3 (5.84) 31.8 (1.25) 57.2 (2.75) 107.7 (4.25)
HLS3DBBPK HL6MO3DBBPK 6,000 PTFE PEEK Tip 88.9 (3.50) 148.3 (5.84) 28.6 (1.13) 50.8 (2.00) 101.6 (4.00)
HLS3DBBHPPK HL6MO3DBBHPPK 10,000 PTFE PEEK Tip 88.9 (3.50) 148.3 (5.84) 31.8 (1.25) 57.2 (2.75) 107.7 (4.25)

Examples – How to specify the available options

¼” NPT Blank Plug (P) or Bleed Plug (BV) - For full details, see page 9. Anti-Tamper operation (AT) – Vent valve only – Available separately or with
manifold, with or without key. For full details, see page 9.
Add the suffix P or BV within the part number, for example:
HLS3DBBP Add the suffix ATV or ATKV within the part number, for example:
HL6MO3DBBHPBV HLS3DBBPATV
HLS3DBBHP3P HL6MO3DBBHPBVATKV
HLS3DBBHP3ATV

Mounting Bracket – Available separately or with manifold in Carbon Steel NACE MR0175 ISO15156 (NC) – For full details, see page 6.
(BK) or stainless Steel (BKS). For full details, see page 23.
Add the suffix NC within the part number, for example:
Add the suffix BK or BKS within the part number, for example: HLS3DBBNC
HLS3DBBBK HL6MO3DBBHPBKSNC
HL6MO3DBBHPBKS HLS3DBBHP3ATKVBKNC
HLS3DBBHP3ATVBK

Example – 10K PSI, PEEK tip, Anti Tamper vent with Key, Bleed plug, Carbon Steel Bracket and NACE: HL6MO3DBBHPPKBVATKVBKNC

13
2 Valve Manifolds - HNL Series Instrument

Remote/line mount - long pattern

These long pattern PREMIER 2-valve Block and Bleed, Isolate and Calibrate, Isolate/Vent/Drain manifolds have a
similar application purpose and functionality as the short pattern variants of the HL series. However, their slimline nature
makes them particularly appealing for free-standing applications where restrictions and orientation are less problematic.
These manifolds have become a firm favorite among OEM customers due to their easy installation package/solution,
combined with their instruments, which makes them suitable for almost all application situations. Bleed/Test Process

Female x Female 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C

HNLS2V HNL6MO2V 6,000 PTFE Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
C HNLS2VHP HNL6MO2VHP 10,000 PTFE Std Hard 105.1 (4.14) 31.8 (1.25) 133.4 (5.25)
HNLS2V3 HNL6MO2V3 6,000 Graphite Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2VHP3 HNL6MO2VHP3 10,000 Graphite Std Hard 105.1 (4.14) 31.8 (1.25) 133.4 (5.25)
HNLS2VPK HNL6MO2VPK 6,000 PTFE PEEK Tip 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
A B
HNLS2VHPPK HNL6MO2VHPPK 10,000 PTFE PEEK Tip 105.1 (4.14) 31.8 (1.25) 133.4 (5.25)

Male x Female 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C
HNLS2V8M8F4F HNL6MO2V8M8F4F 6,000 PTFE Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
C
HNLS2V8M8F4FHP HNL6MO2V8M8F4FHP 10,000 PTFE Std Hard 136.7 (5.38) 31.8 (1.25) 133.4 (5.25)
HNLS2V8M8F4F3 HNL6MO2V8M8F4F3 6,000 Graphite Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8M8F4FHP3 HNL6MO2V8M8F4FHP3 10,000 Graphite Std Hard 136.7 (5.38) 31.8 (1.25) 133.4 (5.25)
A B HNLS2VM8F4FPK HNL6MO2V8M8F4FPK 6,000 PTFE PEEK Tip 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8M8F4FHPPK HNL6MO2V8M8F4FHPPK 10,000 PTFE PEEK Tip 136.7 (5.38) 31.8 (1.25) 133.4 (5.25)

Female x Male 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
A
Pressure
B
Stainless Steel 6MO PSIg Gland Tip A B C
HNLS2V8F8M4F HNL6MO2V8F8M4F 6,000 PTFE Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8F8M4FHP HNL6MO2V8F8M4FHP 10,000 PTFE Std Hard 136.7 (5.38) 31.8 (1.25) 133.4 (5.25)
C HNLS2V8F8M4F3 HNL6MO2V8F8M4F3 6,000 Graphite Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8F8M4FHP3 HNL6MO2V8F8M4FHP3 10,000 Graphite Std Hard 136.7 (5.38) 31.8 (1.25) 133.4 (5.25)
HNLS2V8F8M4FPK HNL6MO2V8F8M4FPK 6,000 PTFE PEEK Tip 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8F8M4FHPPK HNL6MO2V8F8M4FHPPK 10,000 PTFE PEEK Tip 136.7 (5.38) 31.8 (1.25) 133.4 (5.25)

Male x Male 1/2” NPT threaded connections with 1/4” NPT vent - 6,000 PSI or 10,000 PSI (414 Bar or 690 Bar)
AVAILABLE PREMIER SELECTION
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C
HNLS2V8M8M4F HNL6MO2V8M8M4F 6,000 PTFE Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
C
HNLS2V8M8M4FHP HNL6MO2V8M8M4FHP 10,000 PTFE Std Hard 136.7 (5.38) 31.9 (1.25) 133.4 (5.25)
HNLS2V8M8M4F3 HNL6MO2V8M8M4F3 6,000 Graphite Std Hard 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8M8M4FHP3 HNL6MO2V8M8M4FHP3 10,000 Graphite Std Hard 136.7 (5.38) 31.9 (1.25) 133.4 (5.25)
A B HNLS2V8M8M4FPK HNL6MO2V8M8M4FPK 6,000 PTFE PEEK Tip 105.1 (4.14) 28.6 (1.13) 130.2 (5.13)
HNLS2V8M8M4FHPPK HNL6MO2V8MUM4FHPPK 10,000 PTFE PEEK Tip 136.7 (5.38) 31.9 (1.25) 133.4 (5.25)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

Examples – How to specify the available options

¼” NPT Blank Plug (P) or Bleed Plug (BV) - For Anti Tamper operation (AT) – Vent valve only NACE MR0175 ISO15156 (NC) – For full details,
full details, see page 9. – Available separately or with manifold, with or see page 6.
without key. For full details, see page 9.
Add the suffix P or BV within the part number, for Add the suffix NC within the part number, for
example: Add the suffix ATV or ATKV within the part example:
HNLS2VP number, for example: HNLS2VNC
HNL6MO2V8M8F4FHPBV HNLS2VPATV HNL6MO2V8M8F4FHPNC
HNLS2VHP3P HNL6MO2V8M8F4FHPBVATKV HNLS2VHP3ATKVNC
HNLS2VHP3ATV

Example – 10K PSI, PEEK tip, Anti Tamper vent with Key, Bleed plug and NACE: HNL6MO2V8M8F4FHPPKBVATKVNC
14
3 & 5 Valve Manifolds - HL Series
Remote/line mount, pipe to pipe, thread to thread
The Parker PREMIER range of 3 and 5-valve manifolds, which consolidate three or five bonnet assemblies into a single block, are primarily
used in applications requiring Differential Pressure Transmitters, Gauges, and/or Chart Recorders, predominantly for flow measurement
purposes. In certain circumstances, differential pressure measurement can also be applied in other areas, such as level or filtration.
3-valve remote mount manifolds integrate three needle valves into a unitised block, providing isolation for the instrument impulse lines and an
equalisation feature. This facilitates the installation and maintenance of remotely connected instruments.

3VV Female x Female 1/2” NPT threaded connections - 6,000 PSI (414 Bar)

A
B D

C E

With the addition of downstream vent/drain/test ports these 3-valve remote mount manifolds are a cost effective alternative to a 5 valve manifold, where the
application and conditions allow.
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F
HLS3M HL6M3M 6,000 PTFE Std Hard 54.0 (2.13) 82.6 (3.25) 183.0 (7.21) 28.6 (1.13) 78.8 (3.11) 63.5 (2.50)
HLS3M3 HL6MO3M3 6,000 Graphite Std Hard 54.0 (2.13) 82.6 (3.25) 183.0 (7.21) 28.6 (1.13) 78.8 (3.11) 63.5 (2.50)
HLS3MPK HL6MOPK 6,000 PTFE PEEK Tip 54.0 (2.13) 82.6 (3.25) 183.0 (7.21) 28.6 (1.13) 78.8 (3.11) 63.5 (2.50)

3VV Female x Female 1/2” NPT threaded connections with additional 1/4” NPT Female Downstream Test Ports - 6,000
PSI (414 Bar)

A
D
B
C E

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HLS3MDTP HL6MODTP 6,000 PTFE Std Hard 54.0 (2.13) 82.6 (3.25) 183.0 (7.21) 28.6 (1.13) 78.8 (3.11) 63.5 (2.50)
HLS3MDTP3 HL6MODTP3 6,000 Graphite Std Hard 54.0 (2.13) 82.6 (3.25) 183.0 (7.21) 28.6 (1.13) 78.8 (3.11) 63.5 (2.50)
HLS3MDTPPK HL6MODTPPK 6,000 PTFE PEEK Tip 54.0 (2.13) 82.6 (3.25) 183.0 (7.21) 28.6 (1.13) 78.8 (3.11) 63.5 (2.50)

5-valve remote mount manifolds combine five needle valves into one unitised block to create Isolation for the instrument impulse lines and an Equalisation feature
to assist in installation and maintenance of the remotely connected instrument(s). They also incorporate vent/drain or calibration valves and ports. These manifolds
are suitable for use in many applications including those utilising Differential Pressure Gauges.

5VV Female x Female 1/2” NPT threaded connections - 6,000 PSI (414 Bar)

FF

AA
BB D
D
Test/ Process Test/
drain drain C
C EE

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F
HLS5M HL6MO5M 6,000 PTFE Std Hard 54.0 (2.13) 120.0 (4.72) 221.6 (8.72) 28.6 (1.13) 79.4 (3.13) 63.5 (2.50)
HLS5M3 HL6MO5M3 6,000 Graphite Std Hard 54.0 (2.13) 120.0 (4.72) 221.6 (8.72) 28.6 (1.13) 79.4 (3.13) 63.5 (2.50)
HLS5MPK HL6MO5MPK 6,000 PTFE PEEK TIP 54.0 (2.13) 120.0 (4.72) 221.6 (8.72) 28.6 (1.13) 79.4 (3.13) 63.5 (2.50)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.
15
Examples – How to specify the available options
¼” NPT Blank Plug (P) or Bleed Plug (BV) - For full details, see page 9. Anti Tamper operation (AT) – Vent valve and/or Equalise valve only –
Available separately or with manifold, with or without key. For full details, see
Add the suffix P or BV within the part number, for example:
page 9.
HLS3MP
HL6MO3MDTPBV Add the suffix ATV, ATE or ATKV, ATEV within the part number, for example:
HLS5M3P HLS3MPATE
HL6MO3MDTPBVATKE
HLS5M3PATV

Mounting Bracket – Available separately or with manifold in Carbon Steel NACE MR0175 ISO15156 (NC) –
(BK) or stainless Steel (BKS). For full details, see page 24. For full details, see page 6.
Add the suffix NC within the part number, for example:
Add the suffix BK or BKS within the part number, for example:
HLS3MNC
HLS3MBK
HL6MO3MPBKSNC
HL6MO3MPBKS
HLS5M3BVATKVBKNC
HLS5M3ATVBK

Example – PEEK tip, Anti Tamper vent & Equalise with Key, Blank plug, Carbon Steel Bracket and NACE: HL6MO5MPKPATKEVBKNC

2, 3 & 5 Valve Manifolds - HD & HE Series

Direct mount
Combining two, three, or five bonnet assemblies into one block, the Parker PREMIER range 2, 3, and 5-valve manifolds are bolted directly to
the measuring instrument through the DIN/IEC 61518 Type B bolted interface. The manifolds come with interface flange seals (PTFE or Graphite)
as defined by the gland packing selection. Standard 2 or 4 7/16” UNF mounting bolts are also included. Optional stainless steel mounting bolts
can be specified, as well as a selection of carbon or stainless steel brackets.
The 2-valve manifolds are specifically designed for use with directly connected absolute/gauge pressure transmitters for isolation, vent/drain
calibration, and maintenance purposes.
The 3 and 5-valve manifolds are designed for use with differential pressure transmitters in flow and level measuring applications. With the addition
of equalise capability and vent for the 5-valve, they create isolation for the impulse lines and provide additional functionality to install, maintain,
and calibrate the instrument.

Recognising and understanding the direct mount transmitters*

Manifolds mount to this IEC compliant interface

• Pressure applications utilise 2-valve manifolds
bolted with 2 bolts
• Differential applications utilise 3 or 5-valve
manifolds bolted with 4 bolts
Typical installation

7/16” UNF mounting holes

Connection centres are 2 1/8” (54mm)

* Not Emerson CoplanarTM types .

Bolt hole centres are For CoplanarTM please see page 21.
2 1/8” (54mm) x 1 5/8” (41mm)

16
2 VV - Flat barstock, Pipe to flange with 1/2” NPT inlet connections and 1/4” NPT vent - 6,000 PSI (414 Bar)
AVAILABLE PREMIER SELECTION
Instrument
Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

HDS2M HD6MO2M 6,000 PTFE Std Hard 63.5 (2.50) 114.3 (4.50) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)
HDS2MPK HD6MO2MPK 6,000 PTFE PEEK Tip 63.5 (2.50) 114.3 (4.50) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)
Bleed/Test Process
E HDS2MS E
HD6MO2M3 6,000 Graphite Std Hard 63.5 (2.50) 114.3 (4.50) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)
D
D D

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.
A AA CC C

B BB

2 VV - Flat barstock, Pipe to flange with 1/2” NPT inlet connections and 1/4” NPT vent - 6,000 PSI (414 Bar)
AVAILABLE PREMIER SELECTION
Instrument
Material Option Dimension
Pressure
Stainless 6MO PSIg Gland Tip A B C D E F
Steel
D NOT
HETS2 6,000 PTFE Std Hard 98.5 (3.88) 149.3 (5.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 80.7 (3.18)
D D

AVAILABLE
Bleed/Test Process NOT
E
E
HETS2PK
E
6,000 PTFE PEEK Tip 98.5 (3.88) 149.3 (5.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 80.7 (3.18)
AVAILABLE
NOT
A CC HETS23 6,000 Graphite Std Hard 98.5 (3.88) 149.3 (5.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 80.7 (3.18)
AVAILABLE
A A C

B
BB FF F

2 VV - Extruded section, Flange to flange with 1/2” NPT inlet connections and 1/4” NPT vent - 6,000 PSI
AVAILABLE PREMIER SELECTION
E E

Instrument
Material Option Dimension
Pressure
Stainless 6MO PSIg Gland Tip A B C D E F
Steel
NOT
D HEHS2 6,000 PTFE Std Hard 98.5 (3.88) 149.3 (5.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 95.8 (3.77)
AVAILABLE
D D

NOT
Bleed/Test Process
HEHS2PK 6,000 PTFE PEEK Tip 98.5 (3.88) 149.3 (5.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 95.8 (3.77)
E
E E

AVAILABLE
NOT
HEHS23 6,000 Graphite Std Hard 98.5 (3.88) 149.3 (5.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 95.8 (3.77)
A
AA CC C
AVAILABLE
B
B
B
F
F F

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

3 VV - Flat barstock. Pipe to flange with 1/2” NPT inlet connections - 6,000 PSI (414 Bar)
Instrument

d
p

EE
D
D

AA C
C

BB
Process

AVAILABLE PREMIER SELECTION

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

HDS3MA HD6MO3MA 6,000 PTFE Std Hard 110.0 (4.33) 211.6 (8.33) 28.6 (1.13) 63.5 (.50) 91.0 (3.50)

HDS3MAPK HD6MO3MAPK 6,000 PTFE PEEK Tip 110.0 (4.33) 211.6 (8.33) 28.6 (1.13) 63.5 (.50) 91.0 (3.50)

HDS3MA3 HD6MO3MA3 6,000 Graphite Std Hard 110.0 (4.33) 211.6 (8.33) 28.6 (1.13) 63.5 (.50) 91.0 (3.50)

17
3 VV - Extruded section, Pipe to flange with 1/2” NPT inlet connections - 6,000 PSI (414 Bar)
Instrument DD

d
p

EE

A
A C
C

Process B
B
F
F

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HETS3 NOT AVAILABLE 6,000 PTFE Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 82.6 (3.25)

HETS3PK NOT AVAILABLE 6,000 PTFE PEEK Tip 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 82.6 (3.25)

HETS33 NOT AVAILABLE 6,000 Graphite Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 82.6 (3.25)

3 VV - Extruded section, Flange to flange - 6,000 PSI (414 Bar)

Instrument DD
d
p

EE

AA CC
BB FF
Process

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HEHS3 NOT AVAILABLE 6,000 PTFE Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 97.7 (3.85)

HEHS3PK NOT AVAILABLE 6,000 PTFE PEEK Tip 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 97.7 (3.85)

HEHS33 NOT AVAILABLE 6,000 Graphite Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 97.7 (3.85)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

5 VV - Flat barstock. Pipe to flange (2.125” Ctrs) with 1/2” NPT inlet connections and 1/4” NPT vent/drain ports
- 6,000 PSI (414 Bar)

EE

C
D

Test/ Process Test/ AA DC

drain drain BB

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

HDS5MA HD6MO5MA 6,000 PTFE Std Hard 130.0 (5.43) 239.6 (9.43) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

HDS5MAPK HD6M53MAPK 6,000 PTFE PEEK Tip 130.0 (5.43) 239.6 (9.43) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

HDS5MA3 HD6MO5MA3 6,000 Graphite Std Hard 130.0 (5.43) 239.6 (9.43) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

18
5 VV - Flat barstock. Pipe to flange (extended centres) with 1/2” NPT inlet connections and 1/4” NPT vent/drain -
6,000 PSI (414 Bar)

EE

CC

AA DD
Test/ Process Test/ BB
drain drain

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

HDS5 HD6MO5 6,000 PTFE Std Hard 152.4 (6.00) 254.0 (10.0) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

HDS5PK HD6MO5PK 6,000 PTFE PEEK Tip 152.4 (6.00) 254.0 (10.0) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

HDS53 HD6MO53 6,000 Graphite Std Hard 152.4 (6.00) 254.0 (10.0) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

5 VV— Flat barstock. Pipe to flange (extended centres) with 1/2” NPT inlet connections and 1/4” NPT vent/drain
specifically for fiscal metering.
Instrument

EE

C
C

A
A
DD
Process Drain Process
B
B

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

HDS5CT HD6MO5CT 6,000 PTFE Std Hard 152.4 (6.00) 254.0 (10.0) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

HDS5CTPK HD6MO5CTPK 6,000 PTFE PEEK Tip 152.4 (6.00) 254.0 (10.0) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

HDS5CT3 HD6MO5CT3 6,000 Graphite Std Hard 152.4 (6.00) 254.0 (10.0) 63.5 (2.50) 28.6 (1.13) 107.6 (4.24)

5 VV - Extruded section. Pipe to flange with 1/2” NPT inlet connections and 1/4” NPT vent/drain ports - 6,000 PSI
(414 Bar)
Instrument D
D

E
E

AA CC
Test/ Process Test/
BB FF
drain drain

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HETS5 NOT AVAILABLE 6,000 PTFE Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 82.6 (3.25)

HETS5PK NOT AVAILABLE 6,000 PTFE PEEK Tip 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 82.6 (3.25)

HETS53 NOT AVAILABLE 6,000 Graphite Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 101.6 (4.00) 82.6 (3.25)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

19
5 VV - Extruded section. Flange to flange with 1/2” NPT inlet connections and 1/4” NPT vent/drain ports
- 6,000 PSI (414 Bar)
Instrument D
D

EE

AA CC
Test/ Process Test/
drain drain
BB F
F

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HEHS5 NOT AVAILABLE 6,000 PTFE Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 97.7 (3.85)

HEHS5PK NOT AVAILABLE 6,000 PTFE PEEK Tip 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 97.7 (3.85)

HEHS53 NOT AVAILABLE 6,000 Graphite Std Hard 98.5 (3.88) 200.1 (7.88) 31.8 (1.25) 62.0 (2.44) 96.4 (3.80) 97.7 (3.85)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

Examples – How to specify the available options

¼” NPT Blank Plug (P) or Bleed Plug (BV) - For full details, see page 9. Anti Tamper operation (AT) – Vent valve and/or Equalise Vavle only.
Available separately or with manifold, with or without key. For full details, see
Add the suffix P or BV within the part number, for example: page 9.
HDS3MAP
HD6MO5MABV Add the suffix ATV, ATE or ATKV, ATEV within the part number, for example:
HETS53P HDS3MAPATE
HD6MO5MBVATKE
HETS53PATV

Mounting Bracket – Available separately or with manifold in Carbon Steel NACE MR0175 ISO15156 (NC) – For full details, see page 6.
(BK) or stainless Steel (BKS). For full details, see pages 25 and 26.
Add the suffix NC within the part number, for example:
HDS3MABKNC
Add the suffix BK or BKS within the part number, for example:
HD6MO5MAPBKSNC
HDS3MABK
HETS53ATKVBKNC
HD6MO5MAPBKS
HETS53ATKEBK

Example: PEEK tip, Anti Tamper vent & Equalise with Key, Blank plug, Carbon Steel Bracket and NACE: HETS5PKPATKEVBKNC

NOTE: HD & HE series manifolds are also available with the option of stainless steel transmitter mounting bolts (SB). Please insert suffix (SB) within part
number as shown below.

Example: Stainless Steel bolts, PEEK tip, Anti Tamper vent & Equalise with Key, Blank plug, Carbon Steel Bracket and NACE: HDS5MASBPKPATKEVBKNC
Example: Stainless Steel bolts, Graphite, Anti Tamper vent & Equalise with Key, Blank plug, Stainless Steel Bracket and NACE: HDS5MASB3PATKEVBKSNC

20
2, 3 & 5 Valve Manifolds for 2051/3051
CoplanarTM Transmitters
These are the only direct mount manifolds in the range not to comply with the IEC standard. These Parker ‘integral’ style manifolds are uniquely
designed for connection to the non-traditional Emerson/ RosemountTM CoplanarTM transmitter models and are not suitable for use with the
traditional IEC compliant models of this, or other brands.
In this scenario, the assembled manifold/transmitter combination has the advantage of more compact overall dimensions and reduced weight.
Typically, these assemblies are wall-mounted or mounted utilising a 2” NB pipestand. Compatibility of the Parker integral manifold is assured,
having been designed and rigorously tested with all the Emerson/RosemountTM CoplanarTM transmitters, such as 2051 and 3051 models.

Recognising and understanding the direct mount transmitters.

Manifold mounts here

Note the Emerson proprietary non-IEC

compliant interface and the smaller seal
centre dimensions (33mm)

For these products interface 7/16” UNF threaded bolt holes on 54mm
seals are provided with the (2 1/8”) x 41mm (1 5/8”) bolt mounting
transmitter by Emerson centres
3051 DP transmitter, shown with the Emerson flange
3051 DP transmitter, shown with the Emerson flange adapter removed.
adapter in lieu of a manifold. A directly mounted
Parker CoplanarTM manifold, replaces this.

2 VV - Pipe to flange with 1/2” NPT inlet connections and 1/4” NPT vent - 6,000 PSI (414 Bar)
Instrument

EE

D
D

AA CC

Bleed/Test Process B
B

AVAILABLE PREMIER SELECTION

Material Option Dimension
Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E

HDS2MCP HD5MO2MCP 6,000 PTFE Std Hard 110.0 (4.33) 160.8 (6.33) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

HDS2MCPPK HD6MO2MCPPK 6,000 PTFE PEEK Tip 110.0 (4.33) 160.8 (6.33) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

HDS2MCP3 HD6MO2MCP3 6,000 Graphite Std Hard 110.0 (4.33) 160.8 (6.33) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

NOTE: Graphite (3) packing and PEEK (PK) tip not available together.

21
3 VV - Pipe to flange with 1/2” NPT inlet connections - 6,000 PSI (414 Bar)
Instrument

d
p
F F

EE

AA DD
BB
CC
Process

AVAILABLE PREMIER SELECTION

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HDS3MCP HD6MO3MCP 6,000 PTFE Std Hard 33.0 (1.30) 110.0 (4.33) 211.6 (8.33) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

HDS3MCPPK HD6MO3MCPPK 6,000 PTFE PEEK Tip 33.0 (1.30) 110.0 (4.33) 211.6 (8.33) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

HDS3MCP3 HD6MO3M3 6,000 Graphite Std Hard 33.0 (1.30) 110.0 (4.33) 211.6 (8.33) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

5 VV - Pipe to flange with 1/2” NPT inlet connections and 1/4” NPT vent/drains - 6,000 PSI

Instrument

FF

E
E

AA
BB DD
Test/ Process Test/
drain drain CC

AVAILABLE PREMIER SELECTION

Material Option Dimension

Pressure
Stainless Steel 6MO PSIg Gland Tip A B C D E F

HDS5MCP HD6MO5MCP 6,000 PTFE Std Hard 33.0 (1.30) 138.0 (5.43) 239.6 (9.43) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

HDS5MCPPK HD6MO5MCPPK 6,000 PTFE PEEK Tip 33.0 (1.30) 138.0 (5.43) 239.6 (9.43) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

HDS5MCP3 HD6MO5M3 6,000 Graphite Std Hard 33.0 (1.30) 138.0 (5.43) 239.6 (9.43) 28.6 (1.13) 63.5 (2.50) 107.6 (4.24)

22
Mounting Brackets
Brackets for remote/line mount manifolds and gauge valves
It is crucial to fully support impulse/pressure measurement tubing lines, manifolds, and instruments. That is why all Parker manifolds are
designed to accommodate bracket mounting and support. We offer a full range of bracket mounting kits, which can either be supplied fully
assembled to the manifolds or provided separately for on-site installation.
Available in both all-carbon and all-stainless steel variants, these kits are specifically tailored to fit Parker manifolds. They ensure the
necessary clearance for efficient operation of all handles and are designed to provide maximum rigidity and support. Whether oriented
horizontally or vertically, these brackets can be mounted on panels, walls, or 2” NB pipe stands.

29.0

Brackets for 2-valve remote mount manifolds - BKT1 [1.14]

29.0
29.0
(1.14)
[1.14]

47.0
47.0
[1.85]
(1.85) 4-OFF Ø8.5
4-OFF Ø8.5 [Ø0.33"]
(Ø0.33)
MTG.HOLES
MTG. HOLES

47.0
[1.85] 69.5
69.5
[2.74]
(2.74) 4-OFF Ø8.5 [Ø0.33"]
MTG. HOLES
Image shown: Part No.: HLS2VBK Image shown: Part No.: BKT1SSB1 90.0
90.0
[3.54]
(3.54)
69.5
How to order: [2.74]

Part Number 90.0

[3.54]
Item Bracket material: Bracket material: Suitable for Manifold Type
Carbon Steel Stainless Steel

HL*2V
Bracket with M8 ‘U’ Bolt and manifold Bolt Kit
BKT1CSB1 BKT1SSB1 HL*2V8M8F4F
(Nuts and washers: M5 x 45 Bolt (2-OFF)
HAL*2V

Brackets for 2-valve remote mount manifolds and 3-valve DBB manifolds - BKT2 29.0
[1.14]

29.0
29.0
(1.14)
[1.14]

4-OFF Ø8.5
4-OFF Ø8.5 [Ø0.33"]
(Ø0.33)
MTG. HOLES
MTG. HOLES
90.0
90.0
[3.54]
69.5
69.5
[2.74]
(3.54) (2.74) 4-OFF Ø8.5 [Ø0.33"]
MTG. HOLES

90.0 69.5
[3.54] [2.74]

69.5
69.5
(2.74)
[2.74]

90.0
Image shown: Part No.: HLS3DBBBK Image shown: Part No.: BKT2SSB2
90.0
(3.54)
[3.54]
69.5
[2.74]

Part Number 90.0

[3.54]

Item Bracket material: Bracket material: Suitable for Manifold Type

Carbon Steel Stainless Steel

Bracket with M8 ‘U’ Bolts and manifold Bolt Kit

BKT2CSB1 BKT2SSB1 HAL*2VHP
(Nuts and washers: M5 x 45 Bolt (2-OFF)
Bracket with M8 ‘U’ Bolts and manifold Bolt Kit
BKT2CSB2 BKT2SSB2 HL*3DBB
(Nuts and washers: M10 x 12 Bolt (2-OFF)

‘U’ bolt with nuts and washers for 2” NB standpipe

61.5
85.0
85.0

(3.35)
[3.35]

Ø 61.5
[2.42]

(2.42)
46.3
46.3
[1.82]

(1.82)
Bracket kits include U bolts 69.5
69.5
[2.74]

with nuts and washers. (2.74)

23
Mounting Brackets
Brackets for remote/line mount manifolds and gauge valves
Brackets for 3 and 5-valve remote mount manifolds - BKT2
• Universal manifold mounting bracket, suitable for all remote mount manifolds
• Allows 90 degree positioning enabling total installation flexibility and prevents handle obstruction
• Can be wall, standpipe or base mounted
29.0
[1.14]

29.0
29.0
(1.14)
[1.14]

4-OFF Ø8.5
4-OFF Ø8.5 [Ø0.33"]
(Ø0.33)
MTG. HOLES
MTG. HOLES
90.0
90.0
[3.54]
69.5
69.5
[2.74]
(3.54) (2.74) 4-OFF Ø8.5 [Ø0.33"]
MTG. HOLES

90.0 69.5
[3.54] [2.74]

69.5
69.5
(2.74)
[2.74]

90.0
90.0
(3.54)
[3.54]
69.5
[2.74]

Image shown: Part No.: HLS5MBK Image shown: Part No.: BKT2SSB5 90.0
[3.54]

How to order:
Part Number
Item Bracket material: Bracket material: Suitable for Manifold Type
Carbon Steel Stainless Steel

HL*3M
Bracket with M8 ‘U’ Bolt and manifold Bolt Kit
BKT2CSB5 BKT2SSB5 HL*3MDTP
(Nuts and washers: M8 x 45 Bolt (2-OFF)
HL*5M

‘U’ bolt with nuts and washers for 2” NB standpipe

61.5
85.0
85.0
[2.42] (3.35)
[3.35]

Ø 61.5
(2.42)
46.3
46.3
[1.82]
(1.82)

69.5
69.5
[2.74]
(2.74)

Bracket kits include U bolts

with nuts and washers.

24
Mounting Brackets
Brackets for direct mount manifolds
Brackets for 2, 3 and 5-valve direct mount manifolds - BKT3
• Universal manifold mounting bracket, suitable for all direct mount manifolds
• This bracket design enables horizontal or vertical instrument positioning.

Image shown: Part No.: HDS2MBK Image shown: Part No.: HDS3MABK Image shown: Part No.: HDS5MABK
35.0
[1.38]

35.0
35.0

(1.38)
[1.38]

69.5
69.5
[2.74]
145.0 (2.74)
145.0
[5.71]
(5.71) 69.5
[2.74]
145.0
[5.71]

69.5
69.5
(2.74)
[2.74]

90.0
90.0

Image shown: Part No.: BKT3CSB2 [3.54]

(3.54)
69.5
[2.74]

90.0
[3.54]

How to order:
Part Number Suitable for Manifold Type
Item Bracket material: Bracket material:
2-valve 3 & 5-valve
Carbon Steel Stainless Steel

Bracket with M8 ‘U’ Bolts and manifold Bolt Kit HD*3MA

BKT3CSB2 BKT3SSB2 HD*2M
(Nuts and washers: M10 x 12 Bolt (2-OFF) HD*5MA

‘U’ bolt with nuts and washers for 2” NB standpipe

61.5
85.0
85.0
[2.42] (3.35)
[3.35]
61.5
Ø (2.42)
46.3
46.3
[1.82]
(1.82)

69.5
69.5
[2.74]
(2.74)

Bracket kits include U bolts

with nuts and washers.

25
Brackets for 5-valve direct mount HD*5 style manifolds with increased process centres - BKT5
• Universal manifold mounting bracket, suitable for all direct mount manifolds
• This bracket design enables horizontal or vertical instrument positioning

35.0
35.0

(1.38)
[1.38]

4-OFF Ø8.5
4-OFF Ø8.5 [Ø0.33"]

(Ø0.33)
MTG. HOLES

69.5
69.5
MTG. HOLES
(2.74)
[2.74]
145.0 145.0
[5.71]

(5.71)

69.5
69.5 10.0 10.0

(2.74)
[0.39]
[2.74]
(0.39)
90.0
90.0
[3.54]

(3.54)
Image shown: Part No.: HDS5BK Image shown: Part No.: BKT5CSB6

How to order:
Part Number
Item Bracket material: Bracket material: Suitable for Manifold Type
Carbon Steel Stainless Steel

Bracket with M8 ‘U’ Bolts and manifold Bolt Kit HD*5CT

BKT5CSB6 BKT5SSB6
(Nuts and washers: M6 x 12 Bolt (4-OFF) HD*5

Brackets for 2, 3 and 5-valve direct mount extruded manifolds - BKT4

• Universal manifold mounting bracket, suitable for all direct mount extruded manifolds
• This bracket design enables horizontal or vertical instrument positioning.

68.5
68.5 68.5

(2.70)
[2.70][2.70]

4-OFF Ø8.5
4-OFF
4-OFF
Ø8.5 Ø8.5
MTG.MTG.
[Ø0.33"]
HOLES
[Ø0.33"]
HOLES 120.0
(Ø0.33)
120.0120.0

(4.72)
[4.72][4.72]

69.5
69.5 69.5
[2.74][2.74] MTG. HOLES
(2.74)

69.569.5 69.5

(2.74)
[2.74][2.74]

90.090.0 90.0
[3.54][3.54]

(3.54)
Image shown: Part No.: Image shown: Part No.: Image shown: Part No.:
HEHS2BK HEHS5BK BKT4CSB4

How to order:
Part Number Suitable for Manifold Type
Item Bracket material: Bracket material:
2-valve 3 & 5-valve
Carbon Steel Stainless Steel

HET*3
Bracket with M8 ‘U’ Bolt and manifold Bolt Kit HEH*2 HEH*3
BKT4CSB4 BKT4SSB4
(Nuts and washers: M6 x 45 Bolt (3-OFF) HET*2 HET*5
HEH*5

26
Mounting Brackets
Brackets for 2051/3051 CoplanarTM transmitter manifolds
Brackets for 2, 3 and 5-valve direct mount manifolds - BKT3
• Universal manifold mounting bracket, suitable for all direct mount manifolds
• This bracket design enables horizontal or vertical instrument positioning.

Image shown: Part No.: HDS2MCPBK Image shown: Part No.: HDS3MCPBK Image shown: Part No.: HDS5MCPBK
35.0
[1.38]

35.0
35.0

(1.38)
[1.38]

69.5
69.5
[2.74]
145.0 (2.74)
145.0
[5.71]
(5.71) 69.5
[2.74]
145.0
[5.71]

69.5
69.5
(2.74)
[2.74]

90.0
90.0

Image shown: Part No.: BKT3SSB2 [3.54]

(3.54)
69.5
[2.74]

90.0
[3.54]

How to order:
Part Number Suitable for Manifold Type
Item Bracket material: Bracket material:
2-valve 3 & 5-valve
Carbon Steel Stainless Steel

Bracket with M8 ‘U’ Bolts and manifold Bolt Kit HD*3MCP

BKT3CSB2 BKT3SSB2 HD*2MCP
(Nuts and washers: M10 x 12 Bolt (2-OFF) HD*5MCP

27
 European Product Information Centre
Free phone: 00 800 27 27 5374
(from AT, BE, CH, CZ, DE, DK, EE, ES, FI,
FR, IE, IL, IS, IT, LU, MT, NL, NO, PL, PT,
RU, SE, SK, UK, ZA)

© 2023 Parker Hannifin Corporation. All rights reserved. Catalogue 4190-PREM 09.23

Parker Hannifin Manufacturing Ltd.

Instrumentation Products Division, Europe
Riverside Road
Barnstaple EX31 1NP
United Kingdom
phone 0044 (0)1271 313131
www.parker.com/ipd

Your local authorized Parker distributor