Industrial Spray Nozzle Guide
Uploaded by
Gabo NavIndustrial Spray Nozzle Guide
Uploaded by
Gabo NavGENERAL PURPOSE
SPRAY NOZZLES
CTG UG20 BR
www.pnr-nozzles.com
INTRODUCTION
INDEX
INDEX
Page
SPRAY TECHNOLOGY
SPRAY PATTERNS
NOZZLE IDENTIFICATION CODES
FULL CONE NOZZLES
FLAT JET NOZZLES
27
HOLLOW CONE NOZZLES
46
PNR PRODUCT RANGE
55
ADDITIONAL INFORMATION
57
TECHNICAL
PUBLICATIONS
TECHNICAL PUBLICATIONS
Pnr manufactures a complete range of spray nozzles for industrial application, as well as
products and systems specially designed for specific industries. Information about our
Company and our product range is available through the following publications.
PRODUCT RANGE
CTG TV11
GENERAL PURPOSE SPRAY NOZZLES
CTG UG20
AIR ASSISTED ATOMIZERS
CTG AZ18
COMPLEMENTARY PRODUCTS AND ASSEMBLY FITTINGS
CTG AC20
INDUSTRIAL TANK WASHING SYSTEMS
CTG LS20
EVAPORATIVE COOLING SYSTEMS
CTG LN16
FIRE FIGHTING PRODUCTS
CTG FF10
PAPERMILL PRODUCTS
CTG PM10
STEELWORK NOZZLES
CTG SW20
SPRAYDRY NOZZLES
CTG SP10
As a result of continuous product improvement our documentation is regularly updated and
mailed to Customers whose name and address are registered into our Catalogue Mailing List.
We shall gladly register your name if you mail to the nearest PNR office or Distributor the form
on page 57, duly filled with the required information.
NOTES
NOTES
Our products and their performances are continuously reconsidered and modified to keep
up with the latest state of technology. We regret not to able to give our Customers previous
advice about these modifications: for this reason the data and product specifications given
in our Catalogues are always to be understood as being indicative, and do not firmly engage
our Company.
In case your application should imperatively require that one or more characteristics of one
of our products as given by the Catalogue is strictly adhered to, we ask you to obtain a
written confirmation about your requirements before sending your order.
All information contained into this Catalogue, including product data, product codes,
diagrams and photographs are the exclusive property of Flowtech. It is forbidden to
reproduce any part of this Catalogue without having obtained written permission from
Flowtech.
Dimensions in this Catalogue are given in millimetres (mm).
All threads are made according to the ISO 228 standards.
(European norms BS 2779 DIN 259 UNI 338).
Explanations about the abbreviations used in the Catalogue are given on page 57.
All mentioned Trademarks are the property of their respective owners.
Please read our Warranty conditions on page 57.
Our factory has qualified
our Quality System
through DNV to the
Norms ISO 9001/2000
www.pnr-nozzles.com
SPRAY TECHNOLOGY
LIQUID SPRAY AS A PROCESS
The process of spraying a liquid can be described as composed of two phases, namely:
1 Breaking up the liquid into separated drops.
2 Directing the liquid drops onto a surface or an object, to achieve the desired result.
The above two phases are normally performed, by the types of nozzles being used in
industrial processes, at the same time by means of different techniques which shall be
illustrated in the following.
The continuous progress in the manufacturing techniques in recent years has requested the
nozzle manufacturer to make available to the industry an always more complete range of
spray nozzle types to perform the different processes in a more efficient way.
It is the interest of the engineer using spray nozzles in manufacturing processes to become
familiar with the different types of nozzles which are available today and with their individual
characteristics, in order to be able to choose the nozzle which performs with the highest
possible efficiency on a given application.
Spraying a liquid through a spray nozzle can serve different purposes, among which the most
important are the following:
1 Cooling, by means of heat transfer between the product itself and the liquid running on its
surface.
2 Washing, where the water directed onto the product takes away dirt or undesired
substances from the product surface.
3 Humidifying, with sprays carrying very little liquid quantities to the product surface,into a
chamber or into a room.
4 Metering the desired liquid quantity in a unit of time into the product being handled.
5 Applying a product on a surface, as in the case of spray painting or surface pre-treatment
before painting.
6 Increasing the liquid surface to speed up heat transfer processes or chemical reactions
and many others in numerous applications throughout modern industry.
It is self evident that the best results for every application are only obtained when the right
choices in terms of nozzle type, flow value, spray angle, drop dimensions and nozzle material
are made.
The purpose of the following pages is to give the reader the basic knowledge which is needed
to properly select a spray nozzle for a given application.
SPRAY NOZZLES
A spray nozzle is a device which makes use of the pressure energy of a liquid to increase its
speed through an orifice and break it into drops.
Its performances can be identified and described precisely, so that the design engineer can
specify exactly the spray nozzle required for a given process.
The relevant characteristics which identify the performances of a nozzle are the following:
1 The liquid flow delivered as a function of the nozzle feed pressure.
2 The opening angle of the produced spray.
3 The nozzle efficiency, as the ratio between the energy of the spray and the energy used by
the nozzle.
4 The evenness of the flow distribution over the target.
5 The droplet size distribution of the spray.
The above characteristics will be discussed in the following pages, in connection with the
different nozzle types.
www.pnr-nozzles.com
SPRAY TECHNOLOGY
TECHNIQUES FOR SPRAY PRODUCTION
Many different techniques can be used to produce a spray, and most of them are used today
for nozzles to be applied in industrial processes. Based on the different techniques, the
following nozzle types can be used in industrial applications to generate a liquid spray.
1 PRESSURE NOZZLES
This is the simplest type of nozzles, where an orifice is opened into a chamber where the
liquid to be sprayed is fed under pressure. A spray is produced through the orifice with
spray pattern, flow rate and spray angle depending upon the orifice edge profile and the
design of the inside pressure chamber.
Typical pressure nozzles are the flat jet nozzles series GA, J, GX and GY.
2 TURBULENCE NOZZLES
In these nozzles the liquid moving towards the chamber preceding the orifice is given a
rotational speed component, so as to open up in a conical shape as soon as it leaves the
orifice edge because of centrifugal force. Based on the nozzle design and the technique
used to generate the rotational speed, the drops produced can be confined to the cone
outer surface (hollow cone spray) or be evenly distributed to fill the entire volume of the
cone (full cone spray).
3 IMPACT NOZZLES
Here the desired spray shape is obtained producing an impact of the liquid jet onto a
properly designed surface. The liquid jet is subsequently changed into a fluid lamina and
then broken into drops with the desired spray pattern after leaving the nozzle edge.
4 AIR ASSISTED ATOMIZERS
Fine and very fine sprays can be obtained by means of air assisted atomizers, working
upon various different principles. More detailed information about air assisted atomizing
can be found in our Catalogue "Air assisted atomizers" (ordering code CTG AZ18).
The interested reader can find further information into our Spray Handbook CTG SH02 BR, to
be obtained at no cost by any PNR Company or Distributor.
SPRAYING NOZZLE TECHNICAL PARAMETERS
Several technical properties have to be taken into account for properly selecting a nozzle, and
will be mentioned on the following page. Among them the following two are of prime interest
to the design engineer.
1
NOZZLE EFFICIENCY
A spray nozzle is a device that transforms the pressure energy of a liquid flow into kinetic
energy. The nozzle efficiency can be defined as the ratio between the energy available at
the nozzle inlet, and the energy which is used to increase the liquid velocity and create the
spray, the difference being the energy lost within the process because of friction both
inside the liquid and between the liquid and the nozzle inner surface. Depending upon the
nozzle type, and for a good quality machining, the nozzle efficiency varies between 55%
and 95% for the types commonly used in industrial processes. The above is not valid for
air assisted atomizers, which have much higher energy requirements, because of the
losses inherent in the energy transfer from compressed air to liquid surface.
DROPLET SIZE
For several applications the size of the droplets in the spray is of prime importance to the
final result. Considerations about how to define and measure the droplet size of a spray
are contained both in our Spray Engineering Handbook (CTG SH02), and in our Catalogue
Air assisted Atomizers (CTG AZ18).
www.pnr-nozzles.com
SPRAY PATTERNS
FULL CONE PATTERN
In a full cone spray the droplets are distributed into a volume which is limited by a cone,
having its origin point at the nozzle orifice. Such spray pattern is commonly used in a large
variety of industrial processes, since it is the one which allows to distribute in an even way
the water flow onto a surface: the full cone spray pattern is therefore useful, as a typical
example, to evenly spray cooling liquid on a still surface. Another typical use is to distribute
liquid droplets within a certain volume, like for example evenly distributing water droplets in
the inside volume of a cooling tower.
Because of the wide number of processes performed by means of full cone nozzles the
original shape has evolved into a range of specialised types, where the full cone spray pattern,
or a pattern similar to a full cone one, is obtained by different techniques.
STANDARD FULL CONE (TURBULENCE NOZZLE)
These nozzles use a specially shaped vane placed at the nozzle inlet, to give a rotational
speed to the fluid flowing through the nozzle.
Because of the rotational speed of the fluid, water exiting the nozzle orifice is subjected to
centrifugal force and opens up in the shape of a full cone.
The extent of the angle of the cone is a function of both exit speed (created from the inlet
pressure) and the internal design of the nozzle. It can vary in practice from 15 to 120.
STANDARD FULL CONE
These nozzles can be also produced as square full cone nozzles, where the square shape of
the pyramidal spray is obtained by a special design of the outlet orifice.
Two important details have to be noted from the system designer when using these type
of nozzles:
1 - the spray angle is measured on the side of the square section
2 - the square section of the spray rotates within the distance from the nozzle orifice to the
target area.
SPIRAL FULL CONE (DEFLECTION NOZZLE)
This is not properly a full cone, but rather a continuous liquid curtain evolving with the shape
of a spiral inside a conical volume. The disadvantage of a scarcely even distribution is
compensated by an exceptionally good resistance to plugging, which makes this nozzle the
best choice in those applications where safety or system reliability are the prime concern, e.g.
fire fighting systems.
MULTIPLE FULL CONE (TURBULENCE NOZZLE, AIR ATOMIZER)
This spray pattern is used in two cases, that is:
A When a wide spray angle is to be reached with nozzles which inherently can only
produce a narrow one, or in such cases where small size droplets and rather high
capacities are required. Therefore several nozzles are grouped in a cluster with
different spray directions: the resulting spray pattern occurs from the additional group
of single nozzle sprays and the droplet size of the spray remains the same as one of
single nozzle. It must be noted that a smaller nozzle will normally make smaller drops
as compared to a larger size nozzle of the same type operating under the same
conditions.
B When it is necessary to obtain a wide angle jet using nozzles which inherently deliver
a limited angle spray. In the case of a wide angle air atomizer, for example, the droplet
distribution is obviously not homogeneous and the result is rather a number of small
angle sprays with different directions, but still the liquid is atomized towards all the
parts of the volume to be treated
SPIRAL FULL CONE
MULTIPLE FULL CONE
www.pnr-nozzles.com
SPRAY PATTERNS
FLAT JET SPRAY PATTERN
In a flat jet spray the liquid droplets are sprayed in the shape of a flat liquid layer, with different
thickness according to the principle used to generate the spray. A flat jet spray nozzle serves
the purpose of spraying onto a surface or an object moving in a transverse direction with
respect to the one of the jet surface, a typical example being the nozzles in a car washing
tunnel. The vast majority of flat spray nozzles used in the industry work according to one of
the following principles.
IN LINE FLAT JET (PRESSURE NOZZLE)
This is the general purpose flat jet nozzle, where the liquid enters the nozzle in line with the
axis length and is fed to a pressure chamber, from where it is ejected through the nozzle
orifice. Flow value and spray angle are determined respectively from the orifice cross section
and the orifice edge profile.
IN LINE STRAIGHT JET (PRESSURE NOZZLE)
These nozzles can be considered a special kind of flat jet nozzle, with naught degree spray
angle. They are designed to produce a sharp stable stream, with powerful impact on a given
point, and serve normally to perform cleaning processes or to cut soft materials.
SPOON FLAT JET (DEFLECTION NOZZLE)
In this type of nozzle the liquid is fed under pressure to a round outlet orifice, and then
deflected onto a smooth profiled surface so as to assume a flat jet shape. This sophisticated
design is of advantage since it offers a stronger jet impact using the same feed pressure.
Higher efficiency comes from the very little energy required to just change the direction of the
liquid flow, this being the only energy required to generate the flat jet.
HOLLOW CONE SPRAY PATTERN
A hollow cone spray pattern consists of droplets concentrated onto the outer surface of a
conical shape volume, with no droplets contained in the inside of the conical jet shape.
These nozzles are normally used for smoke washing or gas cooling applications in several
industrial processes.
HOLLOW CONE (TURBULENCE NOZZLE)
These nozzles use a tangential injection of liquid into a whirling chamber to generate
centrifugal forces which break up the liquid vein as soon as it leaves the orifice. Precisely
designed orifice profiles, making use of the Coanda effect, provides the ability to obtain
very large spray angles.
HOLLOW CONE (DEFLECTION NOZZLE)
A hollow cone can also be obtained taking a liquid flow to change direction onto a properly
designed surface, in order to break the liquid into droplets and distributing them as a hollow
cone spray pattern.
This kind of nozzle is mainly used for applications in dust control and fire fighting systems.
www.pnr-nozzles.com
NOZZLE IDENTIFICATION CODES
PNR CODING SYSTEM
As any other industrial product, spray nozzles need to be precisely identified by means of a code in order to avoid
mistakes.
PNR coding system has been designed with the following requirements in mind:
- Codes must be easily processed by a computer, in ascending order.
- Codes must describe completely the product without any need for additional description.
- Codes must show to the user the basic specifications of the nozzle in order to ease the search in the catalogue.
We have therefore determined our coding system described as follows:
AA U 2 305 B31 X Y
Thread type or other connection
Special features
Nozzle material code (see below)
The three digits give the nozzle capacity in lpm at 3 bar
according to rank value
Rank of flow value, see table below
Nozzle spray angle, see table below
Nozzle type, as described in the catalogue pages, shown
in ascending order
Nozzle tables report on a blue background the
nominal flow value, measured at 3,0 bar.
Flow values at different pressures have been
calculated.
Some spray angle codes (degrees)
Capacity rank
Rank
0
1
2
3
4
Flow digits
0
1
2
3
4
These codes serve as an indication only.
Based on different types of nozzles, their significance
can occasionally be different.
A
B
C
D
F
H
Actual flow (l/min)
490
490
490
490
490
0,49
4,90
49,0
490
4900
=
=
=
=
=
=
0
15
20
25
30
35
L
M
N
Q
R
S
=
=
=
=
=
=
40
45
50
60
65
75
T
U
J
W
Y
Z
=
=
=
=
=
=
80
90
110
120
130
180
NOZZLE MATERIAL CODES
A1
Carbon steel
D6
Glassfibre reinforced PP
L2
Incolloy 825
A2
High speed steel
D7
High density polyethilene
L8
Hastelloy C276
A8
Zinc coated steel
D8
Polyvinylidenefluoride (PVDF)
P6
Acr. But. Styrene (ABS)
A9
Nickel coated steel
E0
EPDM
P8
EPDM 40 Shore
B1
AISI 303 Stainless steel
E1
Polytetrafluorethylene (PTFE)
T1
Brass
B2
AISI 304 Stainless steel
E2
PTFE (25% glassfibers)
T2
Brass, chrome plated
B21 AISI 304 L Stainless steel
E31 Acetalic resin (POM)
T3
Copper
B3
E7
Viton
T5
Bronze
Brass, nickel plated
AISI 316 Stainless steel
B31 AISI 316 L Stainless steel
E8
Synthetic rubber (NBR)
T8
C2
AISI 416 Stainless steel, hardened
F5
Ceramic
T81 Brass, electroless nickel plated
D1
Polyvinylchloride (PVC)
F31 Ruby insert, 303 body
V1
Aluminum
D2
Polypropylene (PP)
G1
Cast iron
V7
Aluminum, electroless n. plated
D3
Polyamide (PA)
H1
Titanium
D5
Talcum filled Polypropylene
L1
Monel 400
www.pnr-nozzles.com
FULL CONE NOZZLES RANGE OVERVIEW
A wide choice of full cone nozzles are shown on the following pages, covering any
possible requirement for standard industrial processes.
The table below list full nozzle type codes, and beside each type are some general
indications about nozzle style, special features, spray pattern and specific
applications, in order to assist your choice.
Full cone nozzles are normally delivered in brass or AISI 316 Stainless steel, while a
wide choice of other materials like PVC, Polypropylene, Teflon, Hastelloy, Titanium
can be supplied on request.
Please note that nozzles shown in this Catalogue are listed for general purpose
applications, additional nozzle types designed specifically for specific applications are
shown in other Catalogues as listed on the back cover page and shown at page 55.
FULL CONE
Round spray
Type
AA
AE
AL
AT
BA
BB
BC
BD
BE
BF
BG
BH
BL
BR
BS
BX
CA
D
E
Connection
Design
Male thread
Flange
Male/Female
Male thread
Female thread
Female thread
Male thread
Male thread
Female thread
Female thread
Male thread
Male thread
Flange
Female thread
Male thread
Nipple & nut
Female thread
Male thread
Male thread
In line
In line
In line
Tangential
In line
In line
In line
In line
In line
In line
In line
In line
In line
In line
In line
In line
In line
In line
In line
FULL CONE
Cluster spray
Feature
Pattern
Short body
Large capacity
Non clogging
Non clogging
Three pieces
Three pieces
Three pieces
Three pieces
Cast body
Cast body
Small capacity
Two pieces
Large capacity
Narrow spray
Narrow spray
Manifold mount
Cluster jet
Two pieces
Non clogging
Round
Round
Round
Round
Round
Square
Round
Square
Round
Square
Round
Square
Round
Round
Round
Round
Round
Round
Spiral
FULL CONE
Square pattern
Recommended Page
Plastic materials
Coke quench
General
Demister wash
Cleanable
Cleanable
Cleanable
Cleanable
General
General
General
Surface cooling
General
Cleanable
Cleanable
Continuous casting
Cooling
General
Scrubbers
07
08
09
10
11
12
11
12
13
15
13
15
14
16
16
17
18
20
24
www.pnr-nozzles.com
FULL CONE NOZZLES
AA
SLOTTED VANE
RG
Type AA full cone nozzles are made out of a body and a slotted vane,
for even spray distribution.
This type of construction offers a nozzle length generally shorter than
other types, and it is used in applications where strict space
requirements are to be met.
Connection thread is parallel, according to BSP standards.
Typical applications in gas cooling, washing processes and fire fighting
systems.
Their compact design makes them the best choice where a plastic
material like PVC, PP or PTFE is required. The robust construction of
the vane prevents it collapsing when subjected to high temperature,
also there is a price advantage resulting from less material being
required to provide a nozzle of shorter length.
In addition these nozzles can be readily manufactured from almost any
machineable material, making them the best choice when urgent
delivery is requested.
Materials
H1
H
WS
RG
H1
H
WS
RG
H1
H
B31 AISI 316L Stainless steel
T1 Brass
D
All plastic materials on request
WS
Code
90
120
RG
inch
AAU 2305 xx
AAU 2385 xx
AAU 2490 xx
AAU 2610 xx
AAU 2780 xx
AAU 3123 xx
AAU 3194 xx
AAU 3310 xx
AAU 3386 xx
AAU 3490 xx
AAU 3610 xx
AAU 3775 xx
AAW 2490 xx
AAW 2780 xx
AAW 3123 xx
AAW 3194 xx
AAW 3310 xx
AAW 3386 xx
AAW 3490 xx
AAW 3610 xx
AAW 3775 xx
3/4
1
1+1/4
1+1/2
2
2+1/2
3
3/4
1
1+1/4
1+1/2
2
2+1/2
3
D
mm
6.1
6.7
7.8
9.0
10.5
12.5
16.0
20.0
23.0
25.0
28.5
32.0
7.9
13.7
12.7
16.0
20.0
22.7
25.5
30
32.0
D1
mm
Capacity
at different pressure values
3.0
3.0
4.0
4.0
5.0
6.0
6.0
7.0
9.0
12.0
13.0
16.0
3.0
6.0
6.0
6.0
10.0
10.0
12.0
13.0
14.0
(lpm)
(bar)
0.5
0.7
1.0
2.0
3.0
5.0
7.0
12.5
15.7
20.0
24.9
31.9
50.2
79.2
127
158
200
249
317
20.0
31.9
50.2
79.2
127
158
200
249
317
14.7
18.6
23.7
29.5
37.7
59.4
93.8
150
186
237
295
375
23.7
37.7
59.4
93.8
150
186
237
295
375
17.6
22.2
28.3
35.2
45.1
71.0
112
179
223
283
352
448
28.3
45.1
71.0
112
179
223
283
352
448
24.9
31.4
40.0
49.8
63.7
100
158
253
315
400
498
633
40.0
63.7
100
158
253
315
400
498
633
30.5 39.4 46.6
38.5 49.7 58.8
49.0 63.3 74.8
61.0 78.7 93.1
78.0
101
119
123
158
187
194
250
296
310
400
473
386
498
589
490
632
748
610
787
931
775 1000 1183
49.0 63.3 74.8
78.0
101
119
123
158
187
194
250
296
310
400
473
386
498
589
490
632
748
610
787
931
775 1000 1183
H
mm
H1
mm
WS
mm
10
32
12
40
14
16
18
50
60
75
22
90
24
11
15
19
21
24
110
32
40
50
50
60
27
75
30
85
10
55.7
22
70.3
89.4
111
27
142
224
30
354
35
564
45
703
894
52
1112
1412
60
89.4
38
142
47
224
62
354
77
564
99
703
894 123
1112
1412 150
While AA type nozzles are available on request in several materials, the
different sizes are normally stocked or produced in brass, PVC and 316
stainless steel according to the Material Table beside. Also, please note
that the wrench sizes given in the above table refer to brass nozzles,
while stainless steel and plastic bars may have different sizes.
MATERIAL
AISI 316
Brass
PVC
3/4
1+1/4 1+1/2
2+1/2
AA nozzles design
is ideally suited for
plastic materials.
Slotted disc vane
www.pnr-nozzles.com
FULL CONE NOZZLES
AE
FF
SLOTTED VANE
AE type nozzles are designed to deliver large and very large capacity
values, with a carefully designed and machined inside profile, which
offers uniform spray distribution and perfect performance even with
very low inlet pressure values.
The nozzle is made from castings or welded from steel sheet according
to its size, and has an upper flange, normally Nominal Pressure equal
to 16 bar , for connection to the feed line.
Typical application for these nozzle is coke quenching and any other
application requesting efficient cooling over large surfaces and inside
conditioning towers.
Materials
Code
90
120
AEU 3940 xx
AEU 4118 xx
AEU 4147 xx
AEU 4188 xx
AEU 4235 xx
AEU 4294 xx
AEU 4370 xx
AEU 4470 xx
AEU 4588 xx
AEU 4741 xx
AEU 4941 xx
AEW 3940 xx
AEW 4118 xx
AEW 4147 xx
AEW 4188 xx
AEW 4235 xx
AEW 4294 xx
AEW 4370 xx
AEW 4470 xx
AEW 4588 xx
AEW 4741 xx
AEW 4941 xx
Common Applications
Coke quenching
Cooling
DN
mm
80
100
125
150
200
250
80
100
125
150
200
250
D
mm
37
39
43
53
56
59
66
72
81
88
99
36
40.5
43
53
55
59
66
75
81
86
96
D1
mm
12
14
13
16
16
21
24
28
32
39
37
15
14.5
18.5
22
24
28
32
35
40
37
42
A1
B3
G1
Carbon steel
AISI 316 Stainless steel
Cast iron
Capacity
at different pressure values
(lpm)
(bar)
0.25
0.35
0.5
0.7
1.0
2.0
340
425
535
680
845
1065
1345
1710
2135
2650
3410
340
425
535
680
845
1065
1345
1710
2135
2650
3410
405
505
630
810
1010
1265
1593
2020
2530
3185
4050
405
505
630
810
1010
1265
1593
2020
2530
3185
4050
442
568
700
900
1128
1398
1795
2180
2760
3590
4520
442
568
700
900
1128
1398
1795
2180
2760
3590
4520
520
670
830
1060
1335
1650
2120
2565
3300
4245
5350
520
670
830
1060
1335
1650
2120
2565
3300
4245
5350
599
740
940
1180
1495
1880
2320
2995
3635
4690
5980
599
740
940
1180
1495
1880
2320
2995
3635
4690
5980
788
987
1230
1595
1975
2490
3140
3930
4940
6150
7880
788
987
1230
1595
1975
2490
3140
3930
4940
6150
7880
3.0
FF
mm
G
mm
H
mm
200
160
140
220
250
180
210
156
177
285
240
188
340
295
250
395
350
291
200
160
140
220
250
180
210
156
177
285
240
188
340
295
250
395
350
291
5.0
940 1195
1180 1480
1470 1825
1880 2340
2350 2590
2940 3630
3700 4610
4700 5860
5880 7310
7410 9120
9410 11650
940 1195
1180 1480
1470 1825
1880 2340
2350 2590
2940 3630
3700 4610
4700 5860
5880 7310
7410 9120
9410 11650
www.pnr-nozzles.com
FULL CONE NOZZLES
AL
RG
S-TYPE VANE
AL style nozzles offer distinct advantages due to their special
construction, with an integrated S-shape vane cast in one piece with
the nozzle body.
Because of their special design they offer the largest free passage
available in a full cone nozzle (actually identical to the nozzle orifice
diameter) and can easily handle dirty or recirculated liquids as well as
foreign matters.
The best reliability is then assured under the most difficult conditions,
which makes these nozzles the right choice in those plants with nozzle
clogging problems or where removing and cleaning a clogged nozzle is
a difficult job.
Materials
ALU
90
WS
B31 AISI 316 L Stainless steel
Or any castable alloy on request.
ALW
120
Code
2208
2209
2373
2671
2792
2793
2959
3111
3112
3144
3160
3175
3176
3198
3212
3227
3270
3328
3360
3445
3499
3586
3714
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
RG
inch
D
mm
3/8
1/2
3/4
1
1+1/4
1+1/2
8.7
9.5
9.5
10.3
11.1
11.1
12.7
13.5
14.3
14.3
15.1
15.9
16.7
17.5
19.0
20.6
22.3
23.8
25.4
28.5
Capacity
at different pressure values
0.25
0.5
1.0
2.0
3.0
4.0
5.0
5.82
5.82
10.4
19.4
22.9
22.9
27.5
32.0
32.0
41.3
45.9
50.5
50.5
57.2
61.2
74.2
77.9
94.7
104
128
144
167
206
8.53
8.53
15.3
27.4
32.3
32.3
38.9
45.3
45.3
58.4
64.9
71.4
71.4
80.8
86.5
105
110
134
147
182
204
237
291
11.9
11.9
21.3
38.7
45.7
45.7
55.0
64.1
64.1
82.6
91.8
101
101
114
122
148
156
189
208
257
288
335
412
17.1
17.1
30.6
54.8
64.7
64.7
77.7
90.6
90.6
117
130
143
143
162
173
210
220
268
294
363
407
474
583
20.8
20.8
37.3
67.1
79.2
79.2
95.9
112
112
144
160
176
176
198
212
257
270
328
360
445
499
586
714
23.9
23.9
42.9
77.5
91.5
91.5
110
128
128
165
184
202
202
229
245
297
312
379
416
514
576
671
824
26.8
26.8
48.1
86.6
102
102
123
143
143
185
205
226
226
256
274
332
349
423
465
574
644
750
922
AL style nozzles feature a special S-vane design, allowing the
narrowest free passage inside the nozzle to be approximately
equal to the nozzle orifice diameter.
They offer therefore the widest possible passage among all full
cone nozzles working with an internal vane.
Common Applications
Fire protection
Gas scrubbers
Cooling
Washing gravel
Dust control
(lpm)
(bar)
H
mm
WS
mm
38
48
22
27
0.10
0.15
60
32
0.20
75
38
0.35
86
50
0.60
86
112
50
60
0.60
0.90
160
DIA
mm
70
W
Kg
1.6
10
www.pnr-nozzles.com
FULL CONE NOZZLES
AT
VANELESS - OFF LINE
H
These nozzles can produce a full cone spray pattern without
any vane inside the whirl-chamber, which has free internal
passages and is therefore less prone to clogging. The spray
axis has an angle of 90 to the axis of the nozzle feed inlet.
The spray consists of coarse drops insensitive to wind drift,
well distributed over the spray area and with a stable spray
angle over a wide range of inlet pressure values.
RG
WS
Materials
B3 AISI 316 Stainless steel
T1 Brass
Plastic materials on request
This type of nozzle is often manufactured in small quantities,
special materials and customized specifications, and usually not
kept available in stock. Please check with our offices for delivery
time about the nozzles you require.
Code
60
90
120
ATQ 1390 xx
ATQ 1740 xx
ATU 1230 xx
ATU 1390 xx
ATU 1490 xx
ATU 1621 xx
ATU 1740 xx
ATU 1780 xx
ATU 2110 xx
ATU 2153 xx
ATU 2196 xx
ATU 2245 xx
ATU 2315 xx
ATU 2530 xx
ATU 2770 xx
ATU 2420 xx
ATU 2645 xx
ATW 1310 xx
ATW 1311 xx
ATW 1490 xx
ATW 1780 xx
ATW 2110 xx
ATW 2153 xx
ATW 2196 xx
ATW 2245 xx
ATW 2315 xx
ATW 2480 xx
ATW 2770 xx
ATW 2420 xx
ATW 2645 xx
ATW 2870 xx
ATW 3122 xx
RG
inch
D
mm
1/4
1
1/8
1/4
3/8
1/2
3/4
1
2.0
3.0
4.0
5.0
6.0
7.0
3.18
6.04
1.88
3.18
2.83
5.06
6.04
4.50
6.35
8.80
11.3
20.0
18.2
43.3
44.5
34.3
37.2
2.48
2.48
4.00
6.37
8.98
12.5
16.0
20.0
25.7
39.2
62.9
34.3
52.7
71.0
99.6
3.90
7.40
2.30
3.90
4.00
6.20
7.40
6.37
8.98
12.5
16.0
24.5
25.7
53.0
62.9
42.0
52.7
3.10
3.10
4.90
7.80
11.0
15.3
19.6
24.5
31.5
48.0
77.0
42.0
64.5
87.0
122
4.50
8.54
2.66
4.50
4.90
7.16
8.54
7.80
11.0
15.3
19.6
28.3
31.5
61.2
77.0
48.5
64.5
3.58
3.58
5.66
9.00
12.7
17.7
22.6
28.3
36.4
55.4
88.9
48.5
74.5
100
141
5.03
9.55
2.97
5.03
5.66
8.00
9.55
9.00
12.7
17.7
22.6
31.6
36.4
68.4
88.9
54.2
74.5
4.02
4.02
6.33
10.1
14.2
19.8
25.3
31.6
40.7
62.0
99.4
54.2
83.3
112
157
5.52
10.5
3.25
5.52
6.33
8.80
10.5
10.1
14.2
19.8
25.3
34.6
40.7
75.0
99.4
59.4
83.3
4.40
4.40
6.93
11.0
15.6
21.6
27.7
34.6
44.5
67.9
109
59.4
91.2
123
175
5.96
11.3
3.51
5.96
6.93
9.50
11.3
11.0
15.6
21.6
27.7
37.4
44.5
81.0
109
64.2
91.2
4.65
4.65
7.48
11.9
16.8
23.4
29.9
37.4
48.1
73.3
118
64.2
98.5
133
186
2.25
4.27
1.33
2.25
8.7
8.7
12.6
12.6
9.2
10.3
2.5
2.5
4.1
5.0
5.4
5.3
5.5
6.5
8.7
11.2
9.8
10.3
2.1
2.1
2.4
3.4
4.4
5.2
14.1
8.5
8.5
12.6
14.0
9.5
12.8
16.0
18.0
5.5
6.3
7.8
10.7
8.0
9.2
11.5
14.0
Common Applications
Profile washing in drop eliminators
Rotary filter washing
(lpm) H
(bar) mm
1.0
2.2
3.2
1.8
2.1
2.1
3.2
3.2
3.4
4.3
5.2
3/8
3/4
Capacity
at different pressure values
2.4
3.3
2.1
2.5
3.0
3.5
3.3
5.0
5.1
5.3
1/8
1/4
1/2
D1
mm
3.58
4.27
30.6
24.2
1.82
1.82
2.83
4.50
6.35
8.80
11.3
14.1
18.2
27.7
44.5
24.2
37.2
50.2
70.4
Accessories
Swivel joints
Line filters
L
mm
WS
mm
25
34
20
22
25
7.48
27
24
34
15
20
34
20
48
30
58
40
61
42
24
34
15
20
27
34
20
38
48
30
56
59
40
48
58
61
66
61
61
68
76
42
40
45
50
11.9
16.8
23.4
29.9
38
48.1
50
118
48
98.5
22
25
www.pnr-nozzles.com
FULL CONE NOZZLES
BA/BC
RF
X-VANE / ROUND SPRAY / THREE PIECES
These full cone nozzles offer a three-piece design based on the clog
resistant X-vane design plus the convenience of an easy and fast internal
cleaning since they can be easily disassembled for maintenance. The
nipple design avoids loosing the vane when the nozzle is mounted
spraying upwards. Available with female (BA) or male (BC) inlet thread
nipple, see dimensions and weights at the bottom the page.
WS
BA
BA
RG
Materials
B1
B3
T1
AISI 303 Stainless steel
AISI 316 Stainless steel on request
Brass
H
WS
BC
BC
Standard spray
BAQ BCQ
Code
RF
RG
inch
0740
1110
1150
1220
1260
1370
1480
1740
1930
1700
2111
2163
2118
2185
2240
2300
1/8
1/4
3/8
1/2
D1
Capacity
at different pressure values
(lpm) Spray angle (degrees)
(bar) at pressure
(bar)
mm mm
0.7
1.0
2.0
3.0
5.0
7.0
10
0.7
1.5
5.0
1.0
1.2
1.4
1.6
1.6
2.0
2.4
2.9
3.2
3.0
3.4
4.5
3.4
4.4
5.0
5.6
0.5
0.5
1.0
1.0
1.3
1.3
1.7
1.7
1.7
2.0
2.4
2.4
3.0
3.0
3.0
3.0
0.36
0.53
0.72
1.06
1.26
1.79
2.32
3.57
4.46
3.38
5.36
7.87
5.70
8.94
11.6
14.5
0.43
0.64
0.87
1.27
1.50
2.14
2.77
4.27
5.34
4.04
6.40
9.40
6.80
10.7
13.9
17.3
0.60
0.90
1.22
1.80
2.12
3.02
3.92
6.04
7.61
5.71
9.10
13.3
9.60
15.1
19.6
24.5
0.74
1.10
1.50
2.20
2.60
3.70
4.80
7.40
9.30
7.00
11.1
16.3
11.8
18.5
24.0
30.0
0.93
1.42
1.94
2.84
3.36
4.78
6.20
9.60
12.0
9.03
14.3
21.0
15.2
23.9
31.0
38.7
1.13
1.68
2.29
3.36
3.97
5.70
7.30
11.3
14.2
10.7
17.0
24.9
18.0
28.3
36.7
45.8
1.35
2.01
2.74
4.02
4.75
6.76
8.76
13.5
16.9
12.7
20.3
29.8
21.5
33.8
43.8
54.8
-51
43
50
43
50
45
55
68
45
65
85
50
65
70
90
58
65
59
65
48
65
50
65
70
50
68
90
50
68
75
92
53
60
46
60
45
58
45
60
67
45
60
80
45
60
65
85
Wide spray
BAW BCW
Code
RF/RG
D1
0.7
1.0
2.0
3.0
5.0
7.0
10
0.7
1.5
5.0
1200
1310
1400
1570
1720
1860
2100
2122
2144
2172
2194
2220
2250
2290
2320
2360
1/8
1.5
1.8
2.3
2.5
3.3
3.4
3.6
3.9
4.3
4.9
5.3
5.0
5.3
5.6
6.7
7.6
1.0
1.0
1.0
1.1
1.7
1.3
1.6
1.6
2.4
2.4
2.5
3.0
3.0
3.0
3.5
4.0
0.97
1.50
1.93
2.75
3.48
4.15
4.83
5.89
6.96
8.31
9.37
10.6
12.1
14.0
15.5
17.4
1.15
1.79
2.31
3.29
4.16
4.97
5.77
7.04
8.30
9.90
11.2
12.7
14.4
16.7
18.5
20.8
1.63
2.53
3.27
4.65
5.88
7.02
8.16
9.96
11.8
14.0
15.8
18.0
20.4
23.7
26.1
29.4
2.00
3.10
4.00
5.70
7.20
8.60
10.0
12.2
14.4
17.2
19.4
22.0
25.0
29.0
32.0
36.0
2.58
4.00
5.16
7.36
9.30
11.1
12.9
15.8
18.6
22.2
25.0
28.4
32.3
37.4
41.3
46.5
3.06
4.74
6.11
8.71
11.0
13.1
15.3
18.6
22.0
26.3
29.6
33.6
38.2
44.3
48.9
55.0
3.65
5.66
7.30
10.4
13.1
15.7
18.3
22.3
26.3
31.4
35.4
40.2
45.6
52.9
58.4
65.7
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
115
110
110
110
110
110
110
110
110
110
110
115
115
115
115
115
104
104
104
104
105
105
105
105
105
105
105
110
110
110
110
110
RF/RG
inch
H
mm
WS
mm
W
kg
1/8
1/4
3/8
1/2
32
39
47
57
14
17
19
25
0.02
0.04
0.07
0.20
1/4
3/8
1/2
Dimensions and weights
Nozzle
Type
BA/BB
RF/RG
inch
H
mm
WS
mm
W
kg
1/8
1/4
3/8
1/2
30
37
46
57
14
17
19
25
0.03
0.04
0.07
0.20
Nozzle
Type
BC/BD
11
12
www.pnr-nozzles.com
FULL CONE NOZZLES
BB/BD
RF
X-VANE / SQUARE SPRAY / THREE PIECES
WS
Same three-piece nozzle can also be manufactured to supply a square
section spray pattern, to optimize their performance where the coverage of
a surface is required to be as even as possible. Please note that the sides of
the square spray section are not in line with the grooves on the nozzle
orifice, the offset angle being between 10 and 15 depending upon working
pressure and distance. The proper alignement of the nozzles should be
obtained at the time when the system is installed or serviced.
BB
BB
RG
Materials
B1
B3
T1
WS
H
AISI 303 Stainless steel
AISI 316 Stainless steel on request
Brass
BD
BD
Square spray
BBQ BDQ
Code
1270
1360
1440
1740
1890
2110
2133
2210
2270
RF
RG
D1
inch
mm
mm
0.7
1.0
2.0
3.0
5.0
7.0
10
0.7
1.5
5.0
1/8
1.8
1.9
2.1
2.8
3.2
3.8
3.8
5.6
6.4
1.0
1.3
1.3
1.6
1.6
1.6
2.4
3.0
3.2
1.30
1.74
2.13
3.57
4.30
5.31
6.42
10.1
13.0
1.56
2.08
2.54
4.27
5.14
6.35
7.68
12.1
15.6
2.20
2.94
3.59
6.04
7.27
8.98
10.9
17.2
22.0
2.70
3.60
4.40
7.40
8.90
11.0
13.3
21.0
27.0
3.49
4.65
5.68
9.55
11.5
14.2
17.2
27.1
34.9
4.12
5.50
6.72
11.3
13.6
16.8
20.3
32.1
41.2
4.93
6.57
8.03
13.5
16.2
20.1
24.3
38.3
49.3
42
48
60
60
65
75
70
70
75
55
60
65
65
67
80
72
74
80
48
60
60
60
60
75
65
65
75
1/4
3/8
1/2
Capacity
at different pressure values
Common Applications
Drop production in chemical reactors
Scrubbing and washing with recirculated liquids
Washing and rinsing processes
(lpm) Spray angle (degrees)
(bar) at pressure
(bar)
Accessories
Assembly clamps for feed pipes
Swivel joints
Strainers
One way valves
Dimensions and weights
Nozzle
Type
BA/BB
RF/RG
inch
H
mm
WS
mm
W
kg
1/8
1/4
3/8
1/2
30
37
46
57
14
17
19
25
0.03
0.04
0.07
0.20
Nozzle
Type
BC/BD
RF/RG
inch
H
mm
WS
mm
W
kg
1/8
1/4
3/8
1/2
32
39
47
57
14
17
19
25
0.02
0.04
0.07
0.20
13
www.pnr-nozzles.com
FULL CONE NOZZLES
BE/BG
X-VANE/ROUND SPRAY/TWO PIECES
These full cone nozzles have a two-piece design and produce a full cone round spray, with angles
ranging between 70 and 120 and capacities between 4.8 and 1040 litres per minute. Higher
capacities, up to 11,300 lpm can be obtained with the larger sizes shown in the following table.
The X-vane design assures a satisfactory compromise as far as even coverage of the spray and nozzle
resistance to clogging are considered, and is therefore a widely popular choice. The table on this page
shows female threaded nozzles up to 3 size, larger capacity nozzles both with female threads and
flange connections are shown on the next page. Please note BE nozzles have a female BSP thread,
BG have a male BSPT thread. Dimensions for standard and wide spray angle nozzles are shown on
the table at the bottom of this page.
Materials
B1 AISI 303 Stainless steel
B31 AISI 316L Stainless steel
T1
Brass, only sizes 1 and smaller
BE
Standard spray angles
BES
BGQ
Code
1480
1740
1700
2111
2163
2185
2300
2220
2350
2610
2370
2611
2870
3104
2520
2871
3105
3122
3174
2872
3139
3175
3260
3148
3261
3305
3350
3435
3520
3215
3436
3521
3610
3700
3780
3365
3701
3781
3870
4104
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
RF
RG
D1
inch
mm
mm
0.5
1.0
1/4
2.3
2.9
2.6
3.6
4.5
4.6
6.3
4.9
6.4
9.5
6.0
8.3
11.9
11.9
7.4
9.6
10.7
12.3
15.1
9.5
12.7
14.3
18.3
12.7
17.3
19.2
21.0
23.8
28.6
15.1
22.2
24.6
28.6
28.6
31.8
19.1
27.8
30.2
32.5
34.9
1.6
1.6
2.4
2.4
2.8
3.2
3.6
4.4
4.4
5.2
5.6
5.6
5.6
6.4
6.4
6.4
6.4
6.4
7.9
8.7
8.7
8.7
10.3
11.1
11.1
11.1
11.1
14.3
14.3
14.3
14.3
14.3
14.3
17.5
17.5
17.5
17.5
17.5
17.5
20.6
1.96
3.02
2.86
4.53
6.65
7.55
12.2
9.00
14.3
24.9
15.1
24.9
35.5
42.5
21.2
35.5
42.9
49.8
71.0
35.5
56.7
71.4
106
60.4
106
125
143
178
212
87.8
178
212
249
286
318
149
286
318
355
425
2.77
4.27
4.04
6.41
9.41
10.7
17.3
12.7
20.2
35.2
21.4
35.2
50.2
60.0
30.0
50.2
60.6
70.4
100
50.2
80.3
101
150
85.4
150
176
202
251
300
124
251
300
352
404
450
211
404
450
502
600
3/8
1/2
3/4
1+1/4
1+1/2
2+1/2
Capacity
at different pressure values
2.0
3.0
3.92 4.80
6.04 7.40
5.72 7.00
9.06 11.0
13.3 16.3
15.1 18.5
24.5 30.0
18.0 22.0
28.6 35.0
49.8 61.0
30.2 37.0
49.8 61.0
71.0 87.0
84.9
104
42.5 52.0
71.0 87.0
85.7
105
99.6
122
142
174
71.0 87.0
113
139
143
175
212
260
121
148
212
260
249
305
286
350
355
435
425
520
176
215
355
435
425
520
498
610
572
700
637
780
298
365
572
700
637
780
710
870
849 1040
(lpm) Spray angle (degrees)
(bar) at pressure
(bar)
5.0
7.0
10
0.7
3.0
5.0
6.20
9.55
9.04
14.3
21.0
23.9
38.7
28.4
45.2
78.8
47.8
78.8
112
134
67.1
112
136
158
225
112
179
226
336
191
336
394
452
562
671
278
562
671
788
904
1007
471
904
1007
1123
1343
7.33
11.3
10.7
17.0
24.9
28.3
45.8
33.6
53.5
93.2
56.5
93.2
133
159
79.4
133
160
186
266
133
212
267
397
226
397
466
535
664
794
328
664
794
932
1069
1191
558
1069
1191
1329
1589
8.76
13.5
12.8
20.3
29.8
33.8
54.8
40.2
63.9
111
67.6
111
55
65
66
65
59
64
58
54
56
58
58
60
60
62
72
72
72
72
74
68
68
72
74
68
70
72
72
71
74
70
72
72
73
73
75
70
70
72
72
75
60
62
60
67
62
65
60
60
63
65
60
61
63
65
75
75
75
75
75
72
72
75
78
70
73
75
75
75
77
73
75
75
75
77
78
73
73
75
75
78
55
62
55
60
60
60
58
56
60
60
56
58
60
61
65
68
70
71
71
65
70
70
73
68
68
70
70
72
72
70
70
70
70
72
75
68
70
70
70
73
Dimensions
BG
BE
Size inch 1/8
H mm
19.5
WS mm 12.0
H mm
DIA mm
WS mm
1/4
22.0
14.0
3/8
25.0
17.0
1/2
3/4
33.0 40.0
22.0 22.0
55.5
32.0
27.0
1
51.5
27.0
68.0
38.0
32.0
1+1/4 1+1/2
2+1/2
105
140
180
192
48.0 52.0
67.0
85.0
100
90.0
BG
RG
H
WS
BG
RF
DIA
BE
RF
WS
BE
14
www.pnr-nozzles.com
FULL CONE NOZZLES
BE/BG
X-VANE/ROUND SPRAY/TWO PIECES
Wide spray angles
BEW BGW
Code
2100
2122
2144
2172
2194
2220
2250
2290
2320
2360
2500
2920
3134
3200
3395
3590
3800
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
RF
RG
D1
Capacity
at different pressure values
inch mm
mm
0.5
1.0
2.0
3.0
1/4
3/8
1.6
2.4
2.4
2.4
2.8
3.0
3.0
3.0
3.0
3.0
4.5
5.6
6.0
9.0
11.1
14.3
17.5
4.08
4.98
5.88
7.02
7.92
8.98
10.2
11.8
13.1
14.7
20.4
37.6
54.7
81.6
161
241
327
5.77
7.04
8.31
9.93
11.2
12.7
14.4
16.7
18.5
20.8
28.9
53.1
77.4
115
228
341
462
8.16
9.96
11.8
14.0
15.8
18.0
20.4
23.7
26.1
29.4
40.8
75.1
109
163
323
482
653
10.0
12.2
14.4
17.2
19.4
22.0
25.0
29.0
32.0
36.0
50.0
92.0
134
200
395
590
800
3.3
3.6
4.0
5.1
5.2
5.0
5.4
6.4
6.9
7.6
8.7
11.5
14.0
16.5
24.0
26.0
32.0
1/2
3/4
1
1+1/4
1+1/2
2
2+1/2
3
5.0
(lpm) Spray angle (degrees) Dimension
(bar) at pressure
(bar) mm
7.0
12.9 15.3
15.7 18.6
18.6 22.0
22.2 26.3
25.0 29.6
28.4 33.6
32.3 38.2
37.4 44.3
41.3 48.9
46.5 55.0
64.5 76.4
119.
141
173
205
258
306
510
603
762
901
1033 1222
10
0.7
3.0
5.0
H DIA WS
18.3
22.3
26.3
31.4
35.4
40.2
45.6
52.9
58.4
65.7
91.3
115
115
115
115
115
115
115
115
115
115
105
105
110
110
110
110
110
120
120
120
120
120
120
120
120
120
120
110
110
115
115
115
115
115
106
105
105
105
105
105
105
105
105
110
105
105
110
110
110
110
110
23
30
14
17
39
22
40 27
54 34
88
48
102
52
138
67
162
85
187
100
BE/BL
DF
RF
X-VANE/LARGE CAPACITIES
H2
WS
BL
BE
BE
The large capacity nozzles feature a full cone spray pattern with uniform
distribution over a round impact area, for applications where a very large
capacity is required (values up to 11.300 litres per minute). They are
manufactured with large spray angles, while still assuring high water
density per square meter. The bodies are machined from a casting, and
can be finished either with a female thread connection (BE type) or with
an integral ANSI flange (BL type).
Materials
B31
G1
Large capacity
BEU BLU
Code
RF
DF
inch mm
90
BEW
4139
4157
4174
4183
4218
4244
4279
4287
4305
4348
4392
4418
4435
4520
4610
4694
4785
4695
4870
5104
5113
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
Code
10
RF
D1
120
4158 xx
Capacity
at different pressure values
mm
0.7
1.0
43
47
51
54
48
53
68
73
61
70
77
82
70
80
91
102
124
102
102
122
135
19
22
25
25
29
29
35
35
41
41
44
44
48
47
47
57
57
57
64
67
67
671
758
840
884
1053
1179
1348
1386
1473
1681
1894
2019
2101
2512
2947
3352
3792
3357
4202
5024
5458
803
906
1005
1057
1259
1409
1611
1657
1761
2009
2263
2413
2511
3002
3522
4007
4532
4013
5023
6004
6524
D1
DF
47
22
AISI 316L Stainless steel
Cast iron
2.0
3.0
5.0
1135 1390 1794
1282 1570 2027
1421 1740 2246
1494 1830 2363
1780 2180 2814
1992 2440 3150
2278 2790 3602
2343 2870 3705
2490 3050 3938
2841 3480 4493
3201 3920 5061
3413 4180 5396
3552 4350 5616
4246 5200 6713
4981 6100 7875
5666 6940 8960
6409 7850 10134
5675 6950 8972
7104 8700 11232
8492 10400 13426
9226 11300 14588
Capacity (lpm)
(lpm) Dimension
(bar) mm
7.0
10
H2
WS
2123
2398
2658
2795
3330
3727
4262
4384
4659
5316
5988
6385
6645
7943
9318
10601
11991
10616
13289
15886
17261
2538
2866
3177
3341
3980
4455
5094
5240
5569
6354
7157
7632
7942
9494
11137
12671
14332
12689
15884
18988
20631
251
207
130
311
269
170
366
321
200
470
423
240
at pressure (bar)
0.7
1.0
2.0
3.0
758
906
1282 1570
5.0
2027
7.0
527
Dimension mm
10
2398 2538
H2
WS
251
207
130
15
www.pnr-nozzles.com
FULL CONE NOZZLES
BF/BH
X-VANE/SQUARE SPRAY/TWO PIECES
A simpler two piece design is used for BF and BH type nozzles producing a square section spray pattern.
Depending upon their size these nozzles are manufactured out of bar stock or casting, drawings,
dimensions and weights as shown.
They are the convenient choice where the coverage of a surface is required to be as even as possible.
Please note that the sides of the square spray section are not in line with the grooves on the nozzle orifice,
the offset angle is between 10 and 15 depending upon working pressure and distance.
The proper alignment of the nozzles should be obtained at the time when the system is installed or
serviced.
Materials
B1
B31
T1
BH
BF
AISI 303 Stainless steel
AISI 316L Stainless stel
Brass
RG
Standard spray angle
BFS
BHQ
Code
1270
1350
1440
1740
1890
2107
2133
2210
2270
2370
2780
3131
3170
3215
3265
3355
3360
3435
3700
4220
4420
RF
RG
D1
inch
mm
mm
0.7
1/8
1.7
1.9
2.2
2.8
3.2
3.8
4.0
5.5
6.4
6.7
1.9
2.4
2.8
3.2
3.8
1.6
1.9
2.4
2.8
1.9
2.4
1.3
1.3
1.3
1.6
1.6
1.6
2.4
3.2
3.2
4.4
1.3
1.3
1.6
1.6
1.6
1.3
1.3
1.3
1.6
1.3
1.3
1.30
1.74
2.13
3.57
4.30
5.17
6.42
10.1
13.0
17.8
37.7
63.3
82.1
104
128
171
174
210
338
1063
2029
D1
0.7
1/4
3/8
1/2
3/4
1
1+1/4
1+1/2
2
2+1/2
5
6
Capacity
at different pressure values
1.0
2.0
3.0
1.56 2.20 2.70
2.08 2.94 3.60
2.54 3.59 4.40
4.27 6.04 7.40
5.14 7.27 8.90
6.18 8.74 10.7
7.68 10.9 13.3
12.1 17.2 21.0
15.6 22.0 27.0
22.0 31.0 37.0
45.2 64.3 78.0
75.6 107
131
98.1 139
170
124 176
215
153 216
265
205 290
355
208 294
360
251 355
435
404 571
700
1270 1796 2200
2425 3429 4200
(lpm) Spray angle (degrees)
(bar) at pressure
(bar)
5.0
7.0
3.49 4.12
4.65 5.50
5.68 6.72
9.55 11.3
11.5 13.6
13.8 16.3
17.2 20.3
27.1 32.1
34.8 41.2
47.8 56.5
101 120
169 200
219 260
278 328
342 405
458 542
465 550
562 664
904 1069
2840 3361
5422 6416
10
0.7
3.0
5.0
4.93
6.57
8.03
13.5
16.2
19.5
24.3
38.3
49.2
67.5
142
239
310
392
484
648
657
794
1278
4017
7668
52
58
60
62
62
65
60
62
62
60
77
77
75
65
73
73
64
75
73
73
75
60
60
65
65
65
65
62
64
65
64
78
78
78
72
75
75
70
80
76
75
78
58
60
60
60
60
60
60
60
60
62
75
73
70
68
68
70
63
73
74
72
74
10
0.7
3.0
5.0
Wide spray angle
BFW BHW
Size inch
H mm
WS mm
DIA mm
W kg
H
WS
RG
DIA
RF
WS
RG
Code
RF
RG
2100
2122
2144
2172
2194
2220
2250
2290
2320
2360
2500
2930
3134
3200
3395
3590
3800
1/4
3/8
1/2
3/4
1
1+1/4
1+1/2
2
2+1/2
3
1.0
2.0
3.0
5.0
7.0
WS
3.2 1.6
3.9 1.6
4.0 2.4
4.6 2.4
5.4 2.4
4.8 3.0
5.1 3.0
5.7 3.0
7.0 3.0
8.0 3.0
8.5 4.5
11.6 5.6
14.5 6.0
18.2 9.0
24.0 11.1
26.0 14.3
31.5 17.5
1/8
22
12
1/4
23
14
3/8
30
17
1/2
39
21
0.01
0.02
0.03
0.04
4.83
5.89
6.96
8.31
9.37
10.6
12.1
14.0
15.4
17.4
24.2
44.9
64.7
96.6
191
285
386
5.77
7.04
8.31
9.93
11.2
12.7
14.4
16.7
18.5
20.8
28.9
53.7
77.4
115
228
341
462
8.16
9.96
11.8
14.0
15.8
18.0
20.4
23.7
26.1
29.4
40.8
75.9
109
163
322
482
653
10.0
12.2
14.4
17.2
19.4
22.0
25.0
29.0
32.0
36.0
50.0
93.0
134
200
395
590
800
12.9 15.3
15.8 18.6
18.6 22.0
22.2 26.3
25.0 29.6
28.4 33.6
32.3 38.2
37.4 44.3
41.3 48.9
46.5 55.0
64.5 76.4
120 142
173 205
258 305
510 603
761 901
1032 1220
3/4
1
55
70
27
32
32
38
0.20 0.35
1+1/4
88
40
1+1/2
102
50
2
138
60
2+1/2
175
85
0.55
0.80
1.6
2.0
18.3
22.3
26.3
31.4
35.4
40.2
45.6
53.0
58.4
65.7
91.3
170
245
365
721
1077
1460
106
105
105
105
105
105
105
105
105
105
105
107
108
108
110
110
110
3
187
100
5
311
170
6
366
200
7.8
18
25
115
120
120
120
120
110
110
110
110
110
115
110
110
115
112
115
120
100
110
110
105
106
105
105
105
105
105
103
106
107
108
108
110
110
RF
DIA
RF
WS
Dimensions and weights
Values are based on the
largest/heaviest nozzle for
each single size.
16
www.pnr-nozzles.com
FULL CONE NOZZLES
BR/BU
X-VANE/NARROW SPRAY ANGLES
These nozzles produce a solid cone spray with round spray pattern,
where coarse water drops are concentrated within a narrow spray
angle to maximise their impact force per square surface unit.
Spray angle values of 15 or 30 are available, with a choice of male or
female thread connection.
The BR and BS nozzle types are manufactured in three pieces, to allow
for easy disassembly and cleaning of the nozzles in case of clogging.
BR
BT
BS
Materials
BRB
BSB
BUB
Code
WS
BS
RF
WS
H1
AISI 303 Stainless steel
AISI 316 Stainless steel on request
Brass
Spray angle 15
RG
H2
B1
B3
T1
1270
1550
2117
2196
2352
2587
3110
3168
3245
3450
3680
3980
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
RF
RG
inch
mm
1.0
2.0
3.0
1/8
1.6
2.3
3.2
4.2
5.6
7.8
10.2
12.6
15.1
22.0
26.0
31.0
1.56
3.18
6.75
11.3
20.3
33.9
63.5
97.0
141
260
393
566
2.20
4.49
9.60
16.0
28.7
47.9
89.8
137
200
367
555
800
2.70
5.50
11.7
19.6
35.2
58.7
110
168
245
450
680
980
1/4
3/8
1/2
3/4
1
1+1/4
1+1/2
2
2+1/2
3
Capacity
at pressure
(lpm)
(bar)
5.0
10
3.50 4.90
7.10 10.0
15.1 21.4
25.3 35.8
45.4 64.3
75.8
107
142
201
217
307
316
447
581
822
878 1242
1265 1789
Dimensions
mm
DIA
H1
H2
WS
33
35
12
44
53
72
72
92
117
127
183
223
268
44
53
72
17
22
24
25
35
40
52
70
85
100
H1
H2
WS
33
35
12
44
53
72
84
34
44
53
72
87
92
17
22
24
25
35
42
117
40
48
127
52
60
200
55
70
254
60
32
40
48
60
80
90
105
Spray angle 30
BR
BRF
BSF
BTF
Code
RF
RG
Capacity
at pressure
(lpm)
(bar)
inch
mm
1.0
2.0
3.0
5.0
10
1/8
1.0
1.2
1.6
1.8
2.3
3.2
4.2
5.1
6.1
7.4
8.6
9.6
10.5
11.1
11.9
13.5
14.7
15.9
19.1
19.8
20.6
0.57
0.92
1.56
2.02
3.18
6.75
11.3
15.6
23.0
34.0
45.0
57.0
68.0
79.0
90.0
113
136
159
225
248
271
0.80
1.31
2.20
2.86
4.49
9.55
15.9
22.0
32.0
48.0
64.0
80.0
96.0
112
127
159
192
224
318
351
384
0.98
1.60
2.70
3.50
5.50
11.7
19.5
27.0
39.0
59.0
78.0
98.0
117
137
156
195
235
275
390
430
470
1.27
2.07
3.49
4.52
7.10
15.1
25.0
35.0
50.0
76.0
101
127
151
177
201
252
303
355
503
555
606
1.79
2.92
4.93
6.39
10.0
21.4
36.0
49.0
71.0
108
142
179
214
250
285
356
429
502
712
785
857
Dimensions
mm
RG
H2
DIA
BT
RF
H1
DIA
BU
0980
1160
1270
1350
1550
2117
2195
2270
2390
2590
2780
2980
3117
3137
3156
3195
3235
3275
3390
3430
3470
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
1/4
3/8
1/2
3/4
1
1+1/4
1+1/2
2
2+1/2
DIA
Common Applications
Washing and cooling inside pipes
washing of products
Agitating liquids inside tanks and vats.
www.pnr-nozzles.com
FULL CONE NOZZLES
BX
15
NOZZLE TIPS
Full cone tips produce a uniform full cone shaped spray with a round
impact area.
Complete nozzles made out of nozzle tip, seal, nipple and retaining nut.
This design allows the nozzle to be disassembled and readily cleaned
in case of clogging, for fast and easy maintenance.
In addition to metal nipples a range of pipe clamps is available, please
see our Accessories Catalogue CTG AC20.
Materials
B1
T1
21,5
12,2
BX
1508
1743
AISI 303 Stainless steel
Brass
15
Code
60
BXQ
BXQ
BXQ
BXQ
BXQ
BXQ
BXQ
D
Capacity
mm at pressure
1149
1223
1262
1372
1508
1626
1743
xx
xx
xx
xx
xx
xx
xx
1.3
1.7
1.7
2.1
2.4
2.9
2.9
(lpm))
(bar)
1.0
2.0
3.0
5.0
10
0.86
1.35
1.51
2.15
2.93
3.61
4.29
1.22
1.90
2.14
3.04
4.15
5.11
6.07
1.49
2.33
2.62
3.72
5.08
6.26
7.43
1.92
3.01
3.38
4.80
6.56
8.08
10.0
2.72
4.25
4.78
6.79
9.30
11.4
14.0
Spray angle
at different pressure
1.5
50
65
50
65
50
60
67
3.0
50
65
50
65
50
60
67
16
5.0
45
49
46
59
46
55
61
12,2
BX
1149
1372
Under certain conditions, for example nozzle working upsidedown at high temperature or subjected to sudden vacuum in
pipes, the nozzle vane can escape from the body and impair the
nozzle operation.
As an added safety feature our full cone nozzles with X-vane, up
to the 3/8 thread size, have the vane safely secured in places.
BJ
THREADED NOZZLES
WS 22
3/8
Most sizes in the BX range can be obtained as a two-piece nozzle,
with a 3/8 female thread.
Capacity and spray angle maintain exactly the same values, nozzle
identification code is BJQ.
This is convenient where a damaged nipple does not allow for a tight
assembly, and avoids the need for disassembling the pipe and replace
the defective nipple, while keeping approximately the same distance
between the nozzle orifice and the spray target.
As an example, the nozzle with the same specifications of the BXQ
1372 T1 tip has the code BJQ 1372 T1.
Assembly accessories
BX tips are normally secured with a
retaining nut onto a welded nipple.
All details on accessories are shown in
our Catalogue CTG AC20.
ZAA 1738 xx
VAA 0038 xx
27
17
18
www.pnr-nozzles.com
FULL CONE NOZZLES
CAS
CLUSTER NOZZLE/STANDARD SPRAY
RF
DIA
CAS multiple full cone nozzles can produce very fine droplets using
only hydraulic pressure.
Their full cone spray pattern results from the interaction of several
hollow cone sprays, whose number (NR) is stated in the capacity table
below.
Since the droplet size depends among other factors upon the nozzle
size, these multi-orifice nozzles produce a finer spray than a standard
full cone single-orifice nozzle working at the same pressure and
delivering the same quantity of liquid.
Materials
Code
RF
inch
D
mm
D1
mm
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
CAS
1153
1274
1343
1551
1870
2116
2145
2184
2220
2342
2434
2551
2728
2385
2489
2685
3130
3184
3245
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
* Double capacity insert
1/2
3/4
0.9
1.8
1.1
1.5
2.1
2.5
3.0
3.5
4.0
3.5
4.0
5.0
6.0
5.0
6.5
8.0
9.0
12.0
15.0
0.5
0.5
1.0
1.4
2.0
2.0
2.0
2.0
2.0
*2.0
*2.0
*2.0
*2.0
2.5
2.5
2.5
5.0
5.0
5.0
AISI 316 Stainless steel on request
Brass
Capacity
at different pressure values
0.7
70
B3
T1
1.66
2.66
4.20
5.60
7.00
8.89
10.6
16.5
21.0
26.6
35.2
18.5
23.6
33.1
62.8
88.9
118
(lpm)
(bar)
Dimensions
mm
1.0
1.5
2.0
3.0
5.0
10
NR
DIA
1.25
2.24
2.80
4.50
7.10
9.47
11.8
15.0
18.0
28.0
35.4
45.0
59.4
31.4
39.9
56.0
106
150
200
1.53
2.74
3.43
5.51
8.70
11.6
14.5
18.4
22.0
34.3
43.4
55.1
72.8
38.5
48.9
68.5
130
184
245
1.98
3.54
4.43
7.11
11.2
15.0
18.7
23.8
28.4
44.3
56.0
71.1
94.0
49.7
63.1
88.5
168
237
316
2.79
5.00
6.26
10.1
15.9
21.2
26.5
33.6
40.2
62.6
79.2
101
133
70.3
89.2
125
237
336
447
50
33.5
1.98
3.18
5.02
6.70
8.37
10.6
12.7
19.8
25.1
31.8
42.0
22.2
28.2
39.6
75.1
106
141
1.08
1.94
2.43
3.90
6.15
8.20
10.2
13.0
15.6
24.3
30.7
39.0
51.5
27.2
34.5
48.4
91.8
130
173
72
43
140
74
185
103
www.pnr-nozzles.com
FULL CONE NOZZLES
CAY
RF
CLUSTER NOZZLE / WIDE ANGLE SPRAY
CAY multiple full cone nozzles can produce very fine droplets using
only hydraulic pressure.
Their full cone spray pattern results from the interaction of several
hollow cone sprays, whose number (NR) is stated in the capacity table
below.
Since the droplet size depends among other factors upon the nozzle
size, these multi-orifice nozzles produce a finer spray than a standard
full cone single-orifice nozzle working at the same pressure and
delivering the same quantity of liquid.The design of CAY nozzle bodies
produces a wide angle spray while maintaining the fine droplet
dimensions.
Materials
B1
B3
T1
Code
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
CAY
1153
1274
1343
1551
1870
2116
2145
2184
2220
2342
2434
2551
2728
2385
2489
2685
2979
3137
3130
3184
3245
3260
3367
3490
RF
D
inch mm
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
* Double capacity insert
DIA
AISI 303 Stainless steel
AISI 316 Stainless steel on request
Brass
D1
mm
Capacity
at different pressure values
0.7
130
1/2
3/4
1.0
1.8
1.0
1.4
2.0
2.5
3.0
3.5
4.0
3.5
4.0
5.0
6.0
5.0
6.0
8.0
6.0
8.0
9.0
12.0
15.0
9.0
12.0
15.0
0.5
0.5
1.0
1.4
2.0
2.0
2.0
2.0
2.0
*1.7
*1.7
*1.7
*1.7
3.2
3.6
3.6
*2.5
*2.5
3.2
3.2
3.6
*3.0
*3.0
*3.0
1.66
2.66
4.20
5.60
7.00
8.89
10.6
16.6
21.0
26.6
35.2
18.6
23.7
33.1
47.3
66.2
62.8
88.9
118
126
177
237
(lpm)
(bar)
Dimensions
mm
1.0
1.5
2.0
3.0
5.0
10
NR
DIA
1.25
2.24
2.80
4.50
7.10
9.47
11.8
15.0
18.0
28.0
35.4
45.0
59.4
31.4
40.0
55.9
79.9
112
106
150
200
212
300
400
1.53
2.74
3.43
5.51
8.70
11.6
14.5
18.4
22.0
34.2
43.4
55.1
72.8
38.5
49.0
68.5
97.9
137
130
184
245
260
367
490
1.98
3.54
4.43
7.11
11.2
15.0
18.7
23.8
28.4
44.3
56.0
71.1
94.0
49.7
63.3
88.4
126
177
168
238
316
336
474
633
2.79
5.00
6.26
10.1
15.9
21.2
26.5
33.6
40.2
62.6
79.2
101
133
70.3
89.5
125
179
250
237
336
447
475
670
895
40
33.5
1.98
3.18
5.02
6.70
8.37
10.6
12.7
19.8
25.1
31.8
42.0
22.2
28.3
39.5
56.5
79.1
75.1
106
141
150
212
283
1.08
1.94
2.43
3.90
6.15
8.20
10.2
13.0
15.6
24.3
30.7
39.0
51.5
27.2
34.6
48.4
69.2
96.9
91.9
130
173
184
260
346
63
46
120
81
155
104.5
19
20
www.pnr-nozzles.com
FULL CONE NOZZLES
D
TWO-PIECE NOZZLES
RG
D type nozzles offer a simple and efficient design for a full cone nozzle,
that is a wide passage X- style vane assembled into a male threaded
body. For sizes up to 3/8 the vane is locked in place, which allows the
nozzle to be fitted under any possible orientation without the risk of the
vane falling out.
D type nozzles are offered with capacities ranging from 1.18 to 1470
lpm, a full choice of spray angles, and connections from 1/8 to 4.
Normally stocked in the materials listed below, they are often
manufactured on request in several super-alloys.
WS
Materials
B1
B31
T1
AISI 303 Stainless steel
AISI 316L Stainless steel
Brass
Spray angle 45
How to make up the
nozzle code
DAM DBM DCM DDM
The coding for D type nozzles
uses the second digit to
indicate the connection thread
size.
Therefore, according to the
desired thread size and
material, the code for a D type
nozzle is to be given as in the
following example.
D C Q
1588
T1
3/8
60
Capacity
Material
The table below gives coding
and dimensions for different
thread sizes, for nozzles
shown both on this page and
the next page.
Thread size coding table
RG
inch
Code
H
mm
WS
mm
1/8
1/4
3/8
1/2
DA
DB
DC
DD
19.5
22.0
25.0
33.0
12.0
14.0
17.0
22.0
Code
1118
1147
1188
1212
1235
1294
1370
1470
1588
1659
1740
1835
1940
2105
2117
2147
2188
2235
D
mm
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
D1 Capacity
mm at different pressure values
(lpm)
(bar)
0.7
1.0
2.0
3.0
5.0
7.0
10
1.1
1.2
1.3
1.4
1.5
1.7
2.0
2.1
2.3
2.5
2.7
2.8
3.0
3.2
3.4
3.8
4.3
5.0
1.0
1.1
1.2
1.2
1.3
1.5
1.8
2.0
2.0
2.2
2.3
2.6
3.0
3.2
3.3
3.7
4.3
4.5
0.57
0.71
0.91
1.02
1.14
1.42
1.79
2.27
2.84
3.18
3.57
4.03
4.54
5.07
5.65
7.10
9.08
11.4
0.68
0.85
1.09
1.22
1.36
1.70
2.14
2.71
3.39
3.80
4.27
4.82
5.43
6.06
6.75
8.49
10.9
13.6
0.96
1.20
1.54
1.73
1.92
2.40
3.02
3.84
4.80
5.38
6.04
6.82
7.68
8.57
9.55
12.0
15.4
19.2
1.18
1.47
1.88
2.12
2.35
2.94
3.70
4.70
5.88
6.59
7.40
8.35
9.40
10.5
11.7
14.7
18.8
23.5
1.52
1.90
2.43
2.74
3.03
3.80
4.78
6.07
7.59
8.51
9.55
10.8
12.1
13.5
15.1
19.0
24.3
30.3
1.80
2.25
2.87
3.24
3.59
4.49
5.65
7.18
8.98
10.1
11.3
12.8
14.4
16.0
17.9
22.5
28.7
35.9
2.15
2.68
3.43
3.87
4.29
5.37
6.76
8.58
10.7
12.0
13.5
15.2
17.2
19.2
21.4
26.8
34.3
42.9
D1
0.7
1.0
2.0
3.0
5.0
7.0
10
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.4
2.6
2.7
2.9
3.2
3.2
3.4
3.6
4.0
4.5
5.2
5.8
0.8
1.0
1.1
1.2
1.2
1.3
1.4
1.9
2.0
2.0
2.0
2.8
2.8
3.0
3.0
3.3
3.7
4.5
4.7
0.57
0.71
0.91
1.02
1.14
1.42
1.79
2.27
2.84
3.18
3.57
4.03
4.54
5.07
5.65
7.10
9.08
11.4
14.2
0.68
0.85
1.09
1.22
1.36
1.70
2.14
2.71
3.39
3.80
4.27
4.82
5.43
6.06
6.75
8.49
10.9
13.6
17.0
0.96
1.20
1.54
1.73
1.92
2.40
3.02
3.84
4.80
5.38
6.04
6.82
7.68
8.57
9.55
12.0
15.4
19.2
24.0
1.18
1.47
1.88
2.12
2.35
2.94
3.70
4.70
5.88
6.59
7.40
8.35
9.40
10.5
11.7
14.7
18.8
23.5
29.4
1.52
1.90
2.43
2.74
3.03
3.80
4.78
6.07
7.59
8.51
9.55
10.8
12.1
13.5
15.1
19.0
24.3
30.3
38.0
1.80
2.25
2.87
3.24
3.59
4.49
5.65
7.18
8.98
10.1
11.3
12.8
14.4
16.0
17.9
22.5
28.7
35.9
44.9
2.15
2.68
3.43
3.87
4.29
5.37
6.76
8.58
10.7
12.0
13.5
15.2
17.2
19.2
21.4
26.8
34.3
42.9
53.7
Spray angle 60
DAQ DBQ DCQ DDQ
Code
1118
1147
1188
1212
1235
1294
1370
1470
1588
1659
1740
1835
1940
2100
2117
2147
2188
2235
2294
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
www.pnr-nozzles.com
FULL CONE NOZZLES
D
TWO-PIECE NOZZLES
Spray angle 90
DAU DBU DCU DDU
Code
1118
1147
1188
1212
1235
1294
1370
1470
1588
1659
1740
1835
1940
2105
2117
2147
2164
2188
2235
2294
2370
D
mm
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
1.2
1.3
1.4
1.5
1.6
1.8
2.0
2.3
2.6
2.7
2.9
3.3
3.3
3.5
3.7
4.0
4.1
4.7
5.2
5.8
6.4
D1 Capacity
mm at different pressure values
0.8
1.0
1.2
1.2
1.3
1.3
1.4
1.8
1.8
2.0
2.0
2.0
2.4
2.6
2.7
3.2
3.2
3.2
3.8
3.8
3.8
(lpm)
(bar)
0.7
1.0
2.0
3.0
5.0
7.0
10
0.57
0.71
0.91
1.02
1.14
1.42
1.79
2.27
2.84
3.18
3.57
4.03
4.54
5.07
5.65
7.10
7.92
9.08
11.4
14.2
17.9
0.68
0.85
1.09
1.22
1.36
1.70
2.14
2.71
3.39
3.80
4.27
4.82
5.43
6.06
6.75
8.49
9.47
10.9
13.6
17.0
21.4
0.96
1.20
1.54
1.73
1.92
2.40
3.02
3.84
4.80
5.38
6.04
6.82
7.68
8.57
9.55
12.0
13.4
15.4
19.2
24.0
30.2
1.18
1.47
1.88
2.12
2.35
2.94
3.70
4.70
5.88
6.59
7.40
8.35
9.40
10.5
11.7
14.7
16.4
18.8
23.5
29.4
37.0
1.52
1.90
2.43
2.74
3.03
3.80
4.78
6.07
7.59
8.51
9.55
10.8
12.1
13.5
15.1
19.0
21.2
24.3
30.3
38.0
47.8
1.80
2.25
2.87
3.24
3.59
4.49
5.65
7.18
8.98
10.1
11.3
12.8
14.4
16.0
17.9
22.5
25.1
28.7
35.9
44.9
56.5
2.15
2.68
3.43
3.87
4.29
5.37
6.76
8.58
10.7
12.0
13.5
15.2
17.2
19.2
21.4
26.8
29.9
34.3
42.9
53.7
67.6
Spray angle 120
DAW DBW DCW DDW
Code
D1
0.7
1.0
2.0
3.0
5.0
7.0
10
1118
1147
1188
1212
1235
1294
1370
1470
1588
1659
1740
1835
1940
2105
2117
2147
2164
2188
2235
2294
2370
1.2
1.3
1.5
1.6
1.6
1.9
2.1
2.4
2.7
3.0
3.1
3.3
3.5
3.7
3.8
4.2
4.4
4.6
5.3
5.9
6.6
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.6
1.8
1.8
1.9
1.9
1.9
2.3
2.4
2.7
2.7
3.1
3.3
4.1
4.7
0.57
0.71
0.91
1.02
1.14
1.42
1.79
2.27
2.84
3.18
3.57
4.03
4.54
5.07
5.65
7.10
7.92
9.08
11.4
14.2
17.9
0.68
0.85
1.09
1.22
1.36
1.70
2.14
2.71
3.39
3.80
4.27
4.82
5.43
6.06
6.75
8.49
9.47
10.9
13.6
17.0
21.4
0.96
1.20
1.54
1.73
1.92
2.40
3.02
3.84
4.80
5.38
6.04
6.82
7.68
8.57
9.55
12.0
13.4
15.4
19.2
24.0
30.2
1.18
1.47
1.88
2.12
2.35
2.94
3.70
4.70
5.88
6.59
7.40
8.35
9.40
10.5
11.7
14.7
16.4
18.8
23.5
29.4
37.0
1.52
1.90
2.43
2.74
3.03
3.80
4.78
6.07
7.59
8.51
9.55
10.8
12.1
13.5
15.1
19.0
21.2
24.3
30.3
38.0
47.8
1.80
2.25
2.87
3.24
3.59
4.49
5.65
7.18
8.98
10.1
11.3
12.8
14.4
16.0
17.9
22.5
25.1
28.7
35.9
44.9
56.5
2.15
2.68
3.43
3.87
4.29
5.37
6.76
8.58
10.7
12.0
13.5
15.2
17.2
19.2
21.4
26.8
29.9
34.3
42.9
53.7
67.6
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
21
22
www.pnr-nozzles.com
FULL CONE NOZZLES
D
RG
TWO-PIECE NOZZLES/LARGE CAPACITY
H1
The larger nozzles in the D series are widely used in the industry, for a
wide variety of applications. They maintain the simple design of the
smaller nozzles, with the inherent resistance to clogging due to design
of the X-vane, and are often manufactured out of high quality alloys
and special plastic materials.
Materials
WS
Code
60
DEQ 2235 xx
DEQ 2295 xx
DEQ 2370 xx
DEQ 2470 xx
DFQ 2470 xx
DFQ 2590 xx
DFQ 2740 xx
DGQ 2740 xx
DGQ 3118 xx
DHQ 3147 xx
DKQ 3188 xx
DKQ 3235 xx
DKQ 3294 xx
DLQ 3370 xx
DLQ 3470 xx
DMQ 3588 xx
DNQ 3740 xx
DNQ 3940 xx
DPQ 4117 xx
Code
90
DEU 2295 xx
DEU 2370 xx
DEU 2470 xx
DFU 2590 xx
DFU 2740 xx
DFU 2830 xx
DGU 3118 xx
DGU 3147 xx
DHU 3188 xx
DKU 3235 xx
DKU 3294 xx
DKU 3370 xx
DLU 3470 xx
DLU 3588 xx
DMU 3740 xx
DMU 3870 xx
DNU 3940 xx
DNU 4117 xx
DPU 4147 xx
RG
inch
3/4
D
mm
D1
mm
4.8
5.5
6.0
7.0
7.0
7.8
9.5
9.5
12.5
13.0
15.0
16.0
17.0
17.5
23.0
28.0
29.0
36.0
39.0
3.5
4.5
4.5
4.5
5.6
5.6
5.6
5.6
6.0
9.0
9.0
11.0
11.1
11.1
11.1
14.3
17.5
17.5
19.0
RG
D
inch mm
D1
mm
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
3/4
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5.8
6.4
8.0
8.6
9.3
9.9
13.0
16.0
14.5
16.6
18.0
25.0
27.0
30.0
30.0
32.5
35.5
39.0
42.8
3.0
4.5
4.5
4.5
5.0
6.0
6.0
6.0
9.0
11.0
11.0
11.0
11.1
14.3
17.5
17.5
17.5
19.0
25.4
B1
AISI 303 Stainless steel
B31 AISI 316L Stainless steel
T1
Brass
On request special materials are quoted
Capacity
at different pressure values
0.7
1.0
2.0
3.0
11.4
14.2
17.9
22.7
22.7
28.5
35.7
35.7
57.0
71.0
90.8
114
142
179
227
284
357
454
568
13.6
17.0
21.4
27.1
27.1
34.1
42.7
42.7
68.1
84.9
109
136
170
214
271
339
427
543
678
19.2 23.5
24.1 29.5
30.2 37.0
38.4 47.0
38.4 47.0
48.2 59.0
60.4 74.0
60.4 74.0
96.3
118
120
147
154
188
192
235
240
294
302
370
384
470
480
588
604
740
768
940
959 1175
5.0
(lpm)
(bar)
7.0
30.3 35.9
38.1 45.1
47.8 56.5
60.7 71.8
60.7 71.8
76.2 90.1
95.5 113
95.5 113
152 180
190 225
243 287
303 359
380 449
478 565
607 718
759 898
955 1130
1214 1436
1517 1795
Capacity
at different pressure values
2.0
Dimensions
mm
10
H1
WS
42.9
53.9
67.6
85.8
85.8
108
135
135
215
268
343
429
537
676
858
1074
1351
1716
2145
43
16
27
58
18
36
74
19
41
85
106
19
24
50
60
128
27
75
153
190
30
32
85
105
205
36
110
(lpm)
(bar)
Dimensions
mm
0.7
1.0
3.0
5.0
7.0
10
H1
WS
14.2
17.9
22.7
28.5
35.7
40.3
57.0
71.0
90.8
114
142
179
227
284
357
420
454
568
710
17.0 24.1 29.5
21.4 30.2 37.0
27.1 38.4 47.0
34.1 48.2 59.0
42.7 60.4 74.0
48.2 68.2 83.5
68.1 96.3
118
84.9 120
147
109 154
188
136 192
235
170 240
294
214 302
370
271 384
470
339 480
588
427 604
740
502 710
870
543 768
940
678 959 1175
849 1200 1470
38.1
47.8
60.7
76.2
95.5
108
152
190
243
303
380
478
607
759
955
1123
1214
1517
1898
45.1
56.5
71.8
90.1
113
128
180
225
287
359
449
565
718
898
1130
1329
1436
1795
2245
53.9
67.6
85.8
108
135
152
215
268
343
429
537
676
858
1074
1351
1588
1716
2145
2684
43
16
27
58
18
36
74
19
41
85
106
19
24
50
60
128
27
75
153
30
85
190
32
105
205
36
110
www.pnr-nozzles.com
FULL CONE NOZZLES
D
RG
TWO-PIECE NOZZLES/LARGE CAPACITY
H1
WS
Code
120
DEW 2295 xx
DEW 2370 xx
DEW 2470 xx
DFW 2590 xx
DFW 2740 xx
DFW 2830 xx
DGW 3118 xx
DGW 3147 xx
DHW 3188 xx
DKW 3235 xx
DKW 3294 xx
DKW 3370 xx
DLW 3470 xx
DLW 3588 xx
DMW 3740 xx
DMW 3870 xx
DNW 3940 xx
DNW 4117 xx
DPW 4147 xx
RG
inch
3/4
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
D
mm
5.1
6.5
8.5
11.5
12.0
13.0
13.5
17.0
20.0
18.0
19.0
21.3
23.5
26.5
29.5
32.0
33.5
37.0
42.0
D1
mm
3.0
3.5
4.5
4.5
4.5
5.6
6.0
6.0
9.0
11.0
11.0
11.0
11.1
14.3
17.5
17.5
17.5
19.0
25.4
Capacity
at different pressure values
2.0
(lpm)
(bar)
Dimensions
mm
0.7
1.0
3.0
5.0
7.0
10
H1
WS
14.2
17.9
22.7
28.5
35.7
40.3
57.0
71.0
90.8
114
142
179
227
284
357
420
454
568
710
17.0 24.1 29.5
21.4 30.2 37.0
27.1 38.4 47.0
34.1 48.2 59.0
42.7 60.4 74.0
48.2 68.2 83.5
68.1 96.3
118
84.9 120
147
109 154
188
136 192
235
170 240
294
214 302
370
271 384
470
339 480
588
427 604
740
502 710
870
543 768
940
678 959 1175
849 1200 1470
38.1
47.8
60.7
76.2
95.5
108
152
190
243
303
380
478
607
759
955
1123
1214
1517
1898
45.1
56.5
71.8
90.1
113
128
180
225
287
359
449
565
718
898
1130
1329
1436
1795
2245
53.9
67.6
85.8
108
135
152
215
268
343
429
537
676
858
1074
1351
1588
1716
2145
2684
43
16
27
58
18
36
74
19
41
85
106
19
24
50
60
128
27
75
153
30
85
190
32
105
205
36
110
23
24
www.pnr-nozzles.com
FULL CONE NOZZLES
E
RG
SPIRAL NOZZLES
Spiral nozzles work on the impact principle, by deflection of a water
stream onto a spiral profiled surface which provides the desired
spray angle.
The spray angle value is maintained even at low pressure and when
spraying high viscosity liquids.
While the droplet spray distribution is not comparable to the one
provided by a standard full cone nozzle, the fact that a whirling
vane is not required makes them virtually clog-free in most cases.
Since spiral nozzles work on the impact principle and have no
inherent turbulence losses, they produce faster and smaller
droplets as compared to a standard full cone nozzle.
Capacity values on a grey background should be obtained with
metal nozzles only, plastic materials being too weak to assure
structural nozzle resistance.
See next page for materials, applications and assembly fittings.
H1
WS
H
Materials
B31 AISI 316L Stainless steel
T1
Brass
The two above materials are usually available in stock, while several
other materials as listed on page 25 can be obtained on request.
Code
60
90
EBQ 1550 xx
EBQ 2156 xx
ECQ 2230 xx
ECQ 2410 xx
ECQ 2640 xx
EDQ 2940 xx
EDQ 3128 xx
EEQ 3165 xx
EFQ 3260 xx
EHQ 3507 xx
EBU 1550 xx
EBU 2100 xx
EBU 2156 xx
ECU 2230 xx
ECU 2317 xx
ECU 2410 xx
ECU 2640 xx
EDU 2940 xx
EDU 3128 xx
EEU 3165 xx
EFU 3260 xx
EFU 3372 xx
EKU 4109 xx
EMU 4204 xx
EMU 4267 xx
RG
D
inch mm
1/4
3/8
1/2
3/4
1
1 1/2
1/4
3/8
1/2
3/4
1
2
3
D1
mm
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
0.7
1.0
2.0
3.0
5.0
7.0
10
H1
WS
4.49
12.7
19.2
33.9
52.7
77.1
105
135
212
414
5.50
15.6
23.5
41.5
64.6
94.4
128
165
260
507
7.10
20.1
30.3
53.6
83.4
122
165
213
336
655
8.40
23.8
35.9
63.4
99.0
144
196
252
397
774
10.0
28.5
42.9
75.8
118
172
234
301
475
926
45
12
14
48
14
19
64
18
22
70
92
111
19
26
27
27
34
50
7.10 8.40
12.9 15.3
20.1 23.8
30.3 35.9
40.9 48.4
53.6 63.4
83.4 99.0
122 144
165 196
213 252
336 397
480 568
1407 1665
2633 3116
3447 4078
10.0
18.3
28.5
42.9
57.9
75.8
118
172
234
301
475
679
1990
3724
4874
45
12
14
48
14
19
64
18
22
70
92
19
26
27
34
149
219
31
42
65
89
2.4
4.0
4.8
6.4
7.9
9.5
11.1
12.7
15.9
22.2
2.4
3.2
3.2
3.2
3.2
4.7
4.7
4.7
6.3
7.9
2.66
7.54
11.4
20.0
31.2
45.6
61.8
79.7
126
245
3.18
9.01
13.6
24.0
37.3
54.5
73.9
95.3
150
293
2.4
3.2
4.0
4.8
5.6
6.4
7.9
9.5
11.1
12.7
19.0
23.0
34.9
44.5
50.8
2.4
3.2
3.2
3.2
3.9
4.8
5.5
3.3
3.7
4.7
6.3
6.3
11.1
14.3
2.66
4.83
7.54
11.4
15.3
20.0
31.2
45.6
61.8
79.7
126
180
527
985
1290
3.18 4.49 5.50
5.77 8.16 10.0
9.01 12.7 15.6
13.6 19.2 23.5
18.3 25.9 31.7
24.0 33.9 41.5
37.3 52.7 64.6
54.5 77.1 94.4
73.9 105
128
95.3 135
165
150 212
260
215 304
372
629 890 1090
1178 1666 2040
1541 2180 2670
Operation with pressure values and capacities shown on the grey background recommended for cast or machined
metal nozzles only.
The picture shows the inside of a
spiral nozzle with a completely
free passage, without any
internal vane.
www.pnr-nozzles.com
FULL CONE NOZZLES
E
SPIRAL NOZZLES
Code
120
150
180
EBW 1550 xx
EBW 2100 xx
EBW 2156 xx
ECW 2156 xx
ECW 2230 xx
ECW 2317 xx
ECW 2410 xx
ECW 2640 xx
EDW 2940 xx
EDW 3104 xx
EDW 3128 xx
EEW 3165 xx
EFW 3260 xx
EFW 3372 xx
EHW 3507 xx
EHW 3663 xx
EHW 3747 xx
EKW 4109 xx
EKW 4139 xx
EMW 4204 xx
EMW 4265 xx
EPW 4412 xx
ECX 2230 xx
ECX 2317 xx
ECX 2410 xx
ECX 2640 xx
EDX 2940 xx
EDX 3128 xx
EEX 3165 xx
EFX 3260 xx
EFX 3372 xx
EHX 3507 xx
EHX 3663 xx
EHX 3747 xx
EKX 4109 xx
EKX 4139 xx
EBZ 2156 xx
ECZ 2230 xx
ECZ 2317 xx
ECZ 2410 xx
ECZ 2640 xx
EDZ 2940 xx
EDZ 3128 xx
EEZ 3165 xx
EFZ 3260 xx
EFZ 3372 xx
EHZ 3507 xx
EHZ 3663 xx
EHZ 3747 xx
EKZ 4109 xx
EKZ 4139 xx
RG
D
inch mm
1/4
3/8
1/2
3/4
1
1 1/2
2
3
4
3/8
1/2
3/4
1
1 1/2
1/4
3/8
1/2
3/4
1
1 1/2
2.4
3.2
4.0
4.0
4.8
5.6
6.4
7.9
9.5
9.7
11.1
12.7
15.9
19.0
22.2
25.4
28.6
34.9
38.1
44.5
51.0
63.5
4.8
5.6
6.4
7.9
9.5
11.1
12.7
15.9
19.0
22.2
25.4
28.6
34.9
38.1
4.0
4.8
5.6
6.4
7.9
9.5
11.1
12.7
15.9
19.0
22.2
25.4
28.6
34.9
38.1
D1
mm
2.4
3.2
3.2
3.2
3.2
4.0
4.0
4.0
4.8
4.8
4.8
4.8
6.3
7.9
11.1
14.3
15.9
3.2
4.0
4.8
4.8
6.3
7.9
11.1
2.5
3.2
4.0
3.3
4.8
4.7
6.3
7.9
11.1
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
0.7
1.0
2.0
3.0
5.0
7.0
10
H1
WS
2.66
4.83
7.54
7.54
11.4
15.3
20.0
31.2
45.6
50.2
61.8
79.7
126
180
245
320
361
527
671
985
1280
1990
3.18
5.77
9.01
9.01
13.6
18.3
24.0
37.3
54.5
60.0
73.9
95.3
150
215
293
383
431
629
803
1178
1530
2379
4.49
8.16
12.7
12.7
19.2
25.9
33.9
52.7
77.1
84.9
105
135
212
304
414
541
610
890
1136
1666
2164
3364
5.50
10.0
15.6
15.6
23.5
31.7
41.5
64.6
94.4
104
128
165
260
372
507
663
747
1090
1391
2040
2650
4120
7.10
12.9
20.1
20.1
30.3
40.9
53.6
83.4
122
134
165
213
336
480
655
856
964
1407
1796
2634
3421
5318
8.40
15.3
23.8
23.8
35.9
48.4
63.4
98.7
144
159
196
252
397
568
774
1013
1141
1665
2125
3116
4048
6293
10.0
18.3
28.5
28.5
42.9
57.9
75.8
118
172
190
234
301
475
679
926
1210
1364
1990
2540
3725
4838
7522
45
12
14
48
14
19
64
18
22
70
92
19
26
27
34
111
27
50
149
31
65
203
35
90
230
40
127
11.4
15.3
20.0
31.2
45.6
61.8
79.7
126
180
245
320
361
527
671
13.6
18.3
24.0
37.3
54.5
73.9
95.3
150
215
293
383
431
629
803
19.2 23.5
25.9 31.7
33.9 41.5
52.7 64.6
77.1 94.4
105
128
135
165
212
260
304
372
414
507
541
663
610
747
890 1090
1136 1391
30.3
40.9
53.6
83.4
122
165
213
336
480
655
856
964
1407
1796
35.9
48.4
63.4
98.7
144
196
252
397
568
774
1013
1141
1665
2125
42.9
57.9
75.8
118
172
234
301
475
679
926
1210
1364
1990
2540
48
14
19
64
18
22
70
92
19
26
27
34
111
27
50
149
31
65
7.54
11.4
15.3
20.0
31.2
45.6
61.8
79.7
126
180
245
320
361
527
671
9.01
13.6
18.3
24.0
37.3
54.5
73.9
95.3
150
215
293
383
431
629
803
12.7 15.6
19.2 23.5
25.9 31.7
33.9 41.5
52.7 64.6
77.1 94.4
105
128
135
165
212
260
304
372
414
507
541
663
610
747
890 1090
1136 1391
20.1
30.3
40.9
53.6
83.4
122
165
213
336
480
655
856
964
1407
1796
23.8
35.9
48.4
63.4
99.0
144
196
252
397
568
774
1013
1141
1665
2125
28.5
42.9
57.9
75.8
118
172
234
301
475
679
926
1210
1364
1990
2540
45
48
12
14
14
19
64
18
22
70
92
19
25
27
36
111
27
50
149
31
63
Operation with pressure values and capacities shown on the grey background recommended for cast or machined
metal nozzles only.
Spiral nozzles can be delivered in brass and all the plastic
materials in the following list. Most types are also available
from stock or with short delivery in cast 316 stainless steel.
Please contact our sales offices for delivery time in a given
material.
Materials
B31
D1
D2
D8
E1
L8
T1
AISI 316L Stainless steel
PVC
Polypropylene
PVDF
PTFE
Hastelloy C 276
Brass
25
26
www.pnr-nozzles.com
FULL CONE NOZZLES
E-X
RG
SPIRAL NOZZLES/WIDE PASSAGE
H1
E-X type nozzles feature the same design and advantages as the E-type
nozzles, while the resistance to clogging is enhanced by a longer spiral
pitch. The spiral pitch length is typically equal to the inlet orifice diameter,
therefore any foreign particle entering the nozzle can also find a way out
through the spiral opening.
Material list at the bottom of previous page.
WS
H
Code
120
RG
D
inch mm
ECW 2230 xx Xy
3/8
ECW 2317 xx Xy
ECW 2410 xx Xy
ECW 2640 xx Xy
EDW 2940 xx Xy
1/2
EDW 3128 xx Xy
EEW 3165 xx Xy
3/4
EFW 3260 xx Xy
1
EFW 3372 xx Xy
EHW 3507 xx Xy 1 1 /2
EHW 3663 xx Xy
EHW 3747 xx Xy
EKW 4109 xx Xy
2
EKW 4139 xx Xy
EMW 4204 xx Xy
3
EMW 4265 xx Xy
EPW 4412 xx Xy
4
4.8
5.6
6.4
7.9
9.5
11.1
12.7
16.0
19.0
22.2
25.4
28.6
35.0
38.1
44.5
51.0
63.5
D1
mm
4.8
5.6
6.4
7.9
9.5
11.1
12.7
16.0
19.0
22.2
25.4
28.6
35.0
38.1
44.5
51.0
63.5
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
0.7
1.0
2.0
3.0
5.0
7.0
10
H1
WS
11.4
15.3
20.0
31.2
45.6
61.8
79.7
126
180
245
320
361
527
671
985
1280
1990
13.6
18.3
24.0
37.3
54.5
73.9
95.3
150
215
293
383
431
629
803
1178
1530
2379
19.2
25.9
33.9
52.7
77.1
105
135
212
304
414
541
610
890
1136
1666
2164
3364
23.5
31.7
41.5
64.6
94.4
128
165
260
372
507
663
747
1090
1391
2040
2650
4120
30.3
40.9
53.6
83.4
122
165
213
336
480
655
856
964
1407
1796
2634
3421
5318
35.9
48.4
63.4
98.7
144
196
252
397
568
774
1013
1141
1665
2125
3116
4048
6293
42.9
57.9
75.8
118
172
234
301
475
679
926
1210
1364
1990
2540
3725
4838
7522
70
15
22
86
18
27
130
131
168
171
20
26
26
27
27
34
34
50
185
279
27
32
50
65
267
32
90
293
36
127
Operation with pressure values and capacities shown on the grey background recommended for cast or machined
metal nozzles only.
Coding
Extra wide passage spiral nozzles are often supplied in a special design, where
the nozzle has no thread and it is assembled onto a nipple by means of a retaining
nut. This design is the only one possible with Silicon Carbide nozzles, while it can
be obtained as an option for nozzles cast in special alloys or stainless steel.
To identify such nozzles please note the following coding
EHW 3747 xx Xy
xx = Material code, see material table on the previous page
y = Connection code / B=Bspt male thread / N=NPT male thread / F= Locknut fitting
SILICON CARBIDE NOZZLES
We design and supply spiral nozzles made out several types of silicon carbide,
for applications where fluids containing abrasive solid particles must be sprayed
and long nozzle service life is required.
Please contact our offices for more detailed information.
Common Applications
Chemical processes
Fire fighting
Gas cooling
Gas & smoke scrubbers
www.pnr-nozzles.com
FLAT JET NOZZLES RANGE OVERVIEW
A complete range of flat jet spray nozzles is shown on the following pages.
Flat jet nozzles produce typically strong impact values, since the jet energy is concentrated over a
limited surface.
Different techniques are available to produce a flat spray, each one offering specific design and spray
properties so that it is possible to choose the one nozzle meeting all or most of the requirements for a
given case.
For each nozzle type we show the most required construction materials but, as for all other nozzles,
special materials for given applications are often available or can be quoted.
Because of the flat jet shape and its relatively high impact value these nozzles can be employed to wash
objects moving on a conveyor in a transverse direction with regard to the pipe on which the nozzles are
assembled.
Since a flat jet spraying system involves large or relatively large number of nozzles assembled onto one
or more manifolds, a wide range of assembly accessories has been developed to make the job faster.
Using a properly designed fitting not only makes for a professional look for a machine or a system, it
also assures flat sprays to be properly aligned in the right flat jet orientation, or all of them being located
at the right distance from the conveyor.
Recommended accessories are shown at the bottom of each Catalogue page.
Type
F
GA
GX
GY
HT
J
K
K
Connection
Properties
Application
Thread, male/female
Thread, male
Nut and nipple
Nut and nipple
Quick connection
Thread, male
Thread, male
Thread male
High impact
Parabolic distribution
Orientable flat jet
Fixed orientation
Fast replacement
General purpose
High impact
Very wide angle
High pressure washing
General purpose
General purpose
General purpose
General purpose
General purpose
Low pressure washing
Washing, cooling
Page
28
30
31
34
36
37
42
44
STRAIGHT JET NOZZLES
Some applications require nozzles producing a sharp straight jet for maximum impact. It is
customary in the nozzle industry to consider straight jet nozzles as flat jet nozzles with a 0 spray
angle. Straight jet nozzles are then shown in this Catalogue together with flat jet nozzles. All flat jet
nozzle types are available as straight jet nozzles, except GY and K types, with the same materials
used for flat jet nozzles.
27
28
www.pnr-nozzles.com
FLAT JET NOZZLES RANGE OVERVIEW
F
HIGH PRESSURE WASHING
Type F flat jet nozzles are designed for high pressure washing applications.
Their specially designed inner profile allows for even jet distribution, which results in
effective and uniform cleaning action over the surface being processed.
All nozzles are finished on high precision machinery assuring close manufacturing
tolerances for capacity, within +/- 3% of the nominal value, and made out of AISI 416
grade stainless steel bright-hardened through the body and not cheaply surface
hardened. Nozzles shown in this Catalogue have a tapered thread according to BSPT
standards, while NPT threaded nozzles are available for other markets outside Europe.
Typical applications are machines and plants for car washing processes, industrial cleaning
processes,pressure washers.
Material
C2
AISI 416 Stainless steel, hardened
Code
0
15
25
40
65
FAA FBA FXA FAB FBB FXB FAD FBD FXD FAL FBL FXL FAR FBR FXR
1460
1686
1930
2103
2116
2126
2138
2149
2160
2170
2181
2204
2226
2341
2456
2682
Eqv.
DIA
at different pressure values
Nozzle capacity
(lpm)
(bar)
mm
20
30
50
70
100
150
200
0.70
1.12
1.28
1.35
1.42
1.47
1.54
1.60
1.66
1.71
1.76
1.87
1.98
2.40
2.76
3.42
2.0
3.0
4.1
4.6
5.1
5.6
6.1
6.7
7.2
7.6
8.1
9.1
10.1
15.2
20.4
30.5
2.4
3.6
5.0
5.6
6.2
6.9
7.4
8.2
8.8
9.3
9.9
11.2
12.4
18.6
25.0
37.4
3.1
4.7
6.5
7.3
8.1
8.9
9.6
10.5
11.3
12.0
12.8
14.4
16.0
24.0
32.2
48.2
3.7
5.5
7.7
8.6
9.5
10.5
11.4
12.5
13.4
14.2
15.1
17.1
18.9
28.4
38.2
57.1
4.4
6.6
9.2
10.3
11.4
12.6
13.6
14.9
16.0
17.0
18.1
20.3
22.6
34.1
45.4
67.9
5.4
8.1
11.3
12.6
14.0
15.4
16.7
18.2
19.6
20.8
22.2
25.0
27.7
41.5
55.8
83.5
6.2
9.3
13.0
14.6
16.1
17.8
19.2
21.1
22.6
24.0
25.6
28.8
32.0
47.9
64.5
96.4
The table on the next page shows the correspondence between the nominal capacity in
U.S. gallons per minute at 40 psi, which is commonly used to identify high pressure
washing nozzles and the PNR capacity code at 100 bar. See the following page for
dimensions and assembly accessories of high pressure washing nozzles.
www.pnr-nozzles.com
FLAT JET NOZZLES
F
OUTER DIMENSIONS OF F TYPE NOZZLES AND FX NOZZLE TIPS
US
Gals
PNR
Code
02
03
04
045
05
055
06
065
07
075
08
09
10
12
12.5
13
15
20
30
1460
1686
1930
2103
2116
2126
2138
2149
2160
2170
2181
2204
2226
2272
2280
2296
2341
2456
2682
DIA
14,7
1/8
1/4
WS14
16
WS14
22
22
122
FX
FA
FB
High pressure washing accessories
We supply a range our range of quality guns and lances designed for high pressure washing applications in our
Accessories Catalog CTG AC20.
UMW 0010 D4
UMW 0020 D4
UMW 0030 B3
Flow straightener
We can supply on request our FX tips complete with an inside
stainless steel flow straightener to improve jet efficiency.
UMW 0045 B3
29
30
www.pnr-nozzles.com
FLAT JET NOZZLES
GA
1/4
SHORT BODY
3/4
GA type nozzles deliver a flat jet spray with parabolic distribution
pattern, which allows for obtaining an even distribution when several
nozzles are assembled in a row onto a manifold. Their short body
design makes it possible to use nozzle spray pipes in such machines
or systems where the available space is very limited. GA nozzles are
manufactured in two different capacity ranges out of brass or 303
stainless steel, and on request from a choice of additional metalic
and plastic materials. Because of their limited length these nozzles
can only be produced with a straight BSP thread, and require some
extra care when being assembled to get the proper flat jet alignment.
Also note the different dimensions given in the table below for
nozzles manufactured out of plastic materials.
H1
H
WS
H1
H
WS
Materials
B1
B31
D1
E1
T1
AISI 303 Stainless steel
AISI 316L Stainless steel
PVC
PTFE, Teflon
Brass
1/4 BSP Thread
GAM GAQ GAU GAW
45
60 90 120
Code
D
mm
Capacity
at different pressure values
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
1.79
2.22
2.83
4.50
7.16
8.83
11.2
2.19
2.72
3.46
5.52
8.77
10.8
13.7
2.53
3.14
4.00
6.37
10.1
12.5
15.8
3.10
3.85
4.90
7.80
12.4
15.3
19.4
3.58
4.45
5.66
9.01
14.3
17.7
22.4
4.00
4.97
6.33
10.1
16.0
19.8
25.0
4.74
5.88
7.48
11.9
18.9
23.4
29.6
5.66
7.03
8.95
14.2
22.6
27.9
35.4
1310
1385
1490
1780
2124
2153
2194
2.0
2.2
2.5
3.0
4.0
4.2
5.0
1.27
1.57
2.00
3.18
5.06
6.25
7.92
Code
D
mm
Capacity
at different pressure values
3/4 BSP Thread
GAM GAQ GAU GAW
45
60 90 120
2195
2246
2311
2490
2610
2760
5.0
5.5
6.0
8.0
9.0
10.0
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
7.96
10.0
12.7
20.0
24.9
31.0
11.3
14.1
17.9
28.2
35.2
43.8
13.8
17.3
21.9
34.6
43.1
53.7
15.9
20.0
25.3
40.0
49.8
62.1
19.5
24.5
31.0
49.0
61.0
76.0
22.5
28.3
35.8
56.6
70.4
87.8
25.2
31.6
40.0
63.3
78.8
98.1
29.8
37.4
47.4
74.8
93.2
116
35.6
44.7
56.6
89.5
111
139
Dimensions of plastic nozzles
GA nozzles made out of plastic materials, have lower material
strength and therefore different dimensions with a longer thread and
a stronger front hexagon are utilized.
Dimensions mm
Small size
Large size
Material
H1
WS
H1
WS
AISI 303
AISI 316L
BRASS
POLYPROPYLENE
PTFE
PVC
12
17
15
32
17
17
23
11
32
www.pnr-nozzles.com
31
FLAT JET NOZZLE TIPS
GX
LOW CAPACITY
14,7
Flat jet nozzle tips are usually mounted onto a pipe by means of a
welded nipple or a clamp, and secured in place with a retaining nut.
Seals are available for higher pressure operation, see bottom of the
page. They can be therefore easily replaced and the jet can be
conveniently oriented in the desired direction.
The tip models shown in this page deliver very low flow values, the
precision machined tiny orifices can be protected against the risk of
plugging by means of a filter fitting inside our nipples and clamps
which are designed for this purpose.
Materials
GXD
B1
B31
T1
GXL GXN GXR
Code
GXS
GXT
GXV
GXJ
Code
0060
0100
0130
0150
0200
0260
0390
0590
0780
1120
1160
12,2
AISI 303 Stainless steel
AISI 316L Stainless steel
Brass
Capacity
at different pressure values
0.5
10
1.0
0060
0100
0130
0200
0260
0390
0590
0780
1120
1160
0.24
0.32
0.49
0.65
0.12
0.15
0.23
0.34
0.45
0.69
0.92
0.5
1.0
0.24
0.32
0.49
0.65
012
0.15
0.23
0.34
0.45
0.69
0.92
(lpm)
(bar)
1.5
2.0
3.0
4.0
5.0
7.0
10
0.14
0.18
0.28
0.42
0.55
0.85
1.13
0.05
0.08
0.11
0.16
0.21
0.32
0.48
0.64
0.98
1.31
0.06
0.10
0.13
0.20
0.26
0.39
0.59
0.78
1.20
1.60
0.07
0.12
0.15
0.23
0.30
0.45
0.68
0.90
1.39
1.85
0.08
0.13
0.17
0.26
0.34
0.50
0.76
1.01
1.55
2.07
0.09
0.15
0.20
0.31
0.40
0.60
0.90
1.19
1.83
2.44
0.11
0.18
0.24
0.37
0.47
0.71
1.08
1.42
2.19
2.92
1.5
2.0
3.0
4.0
5.0
7.0
10
0.14
0.18
0.28
0.42
0.55
0.85
1.13
0.05
0.08
0.11
0.13
0.16
0.21
0.32
0.48
0.64
0.98
1.31
0.06
0.10
0.13
0.15
0.20
0.26
0.39
0.59
0.78
1.20
1.60
0.07
0.12
0.15
0.17
0.23
0.30
0.45
0.68
0.90
1.39
1.85
0.08
0.13
0.17
0.20
0.26
0.34
0.50
0.76
1.01
1.55
2.07
0.09
0.15
0.20
0.25
0.31
0.40
0.60
0.90
1.19
1.83
2.44
0.11
0.18
0.24
0.28
0.37
0.47
0.71
1.08
1.42
2.19
2.92
Accessories
All our range of accessories for
GX tips, including welding
nipples, pipe clamps, cartridge
filters and retaining nuts are
shown in our Accessories
Catalog CTG AC20.
How to compose the
nozzle code
The nozzles tips shown in this
page can be supplied with eight
different spray angles, whose
value are indicated by the third
digit in the nozzle code.
Therefore the nozzle tip code
has to be indicated as in the
following example.
GXS 0260 T1
73
Spray angle codes
GXD
25
GXL
40
GXN
50
GXR
65
GXS
73
GXT
80
GXV
95
GXJ
110
Please note that following spray
angle coding applies.
Seal available on request
Material Table
Material
AISI 316L
AISI 303
Brass
The table on the left shows the
codes for the different spray
angles.
0060
0100
0130
0150
0200
0260
0390
0590
0780
1120
1160
Because of the extreme difficulty of working hard materials such as stainless steels with very
small profile drills not all the capacity sizes shown in the nozzle table are available in all materials.
The table below shows the minimum capacity values we can produce for each given material.
Please contact our offices for information on the maximum spray angle available for each
capacity and material.
See seal code for standard tip
dimension on page 33.
32
www.pnr-nozzles.com
FLAT JET NOZZLE TIPS
GX
14,7
10
12,2
23,8
11
20
How to compose the
nozzle code
The nozzle tips shown on this
page can be supplied with six
different spray angles, whose
value is indicated by the third
digit in the nozzle code.
Therefore, the nozzle tip code
has to be identified as in the
following example.
GXQ 1780 B31
STANDARD AND LARGE CAPACITIES
Flat jet nozzle tips are usually mounted onto a pipe by means of a
welded 3/8 nipple or a clamp, and secured in place with a retaining
nut. Seals are available for higher pressure operation, see bottom table
next page. They can therefore easily be replaced and their jet can be
conveniently oriented in the desired direction. The tip models shown on
this page deliver the most popular capacity values, the precision
machined orifices can be protected against the risk of plugging by
means of a filter fitting inside the nipples and clamps, which are
designed for this purpose. Higher capacity tips, shown in the bottom
table, do not need filter protection because of the large dimension of
the orifices and are assembled onto 3/4 nipples.
See nipple and retaining nut codes at the bottom of the page. Tips with
higher capacities and larger dimensions than those shown in the
Catalogue can be delivered on request, together with specification of
the nipples and retaining nuts.
Materials
B1
B31
T1
AISI 303 Stainless steel
AISI 316L Stainless steel
Brass
Assembly fittings
The table in the following page shows the coding for a typical assembly
of a nozzle tip, by means of a retaining nut and a welding nipple.
Threaded nipples , as well as a range of plastic or steel pipe clamps
below, make it possible to choose the best suited solution and are also
shown in our accessories Catalogue CTG AC20.
Spray angle codes
60
The codes for the different
spray angle values are listed
in the table adjacent.
GXA
0
GXF
30
GXM
45
GXQ
60
GXU
90
GXW
120
Typical assembly with nipple and nut.
Assembly fittings
ZPM
ZPB
VEC
www.pnr-nozzles.com
FLAT JET NOZZLE TIPS
GX
STANDARD AND LARGE CAPACITIES
Standard capacity tips
GXA GXF GXM GXQ GXU GXW
Code
Capacity
at different pressure values
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2194
2245
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
5.85
7.20
9.20
11.5
1.34
1.65
2.19
2.72
3.46
4.11
5.52
6.93
8.77
10.8
13.8
17.3
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
Code
Capacity
at different pressure values
Large capacity tips
GXA GXF GXM GXQ GXU GXW
1781
1981
2125
2154
2195
2246
2311
2490
2610
2760
3122
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
3.18
4.00
5.06
6.25
7.92
10.0
12.7
20.0
24.9
31.0
49.8
4.50
5.66
7.16
8.83
11.2
14.1
17.9
28.3
35.2
43.9
70.4
5.52
6.93
8.77
10.8
13.7
17.3
21.9
34.6
43.1
53.7
86.3
6.37
8.00
10.1
12.5
15.8
20.0
25.3
40.0
49.8
62.1
99.6
7.80
9.80
12.4
15.3
19.4
24.5
31.0
49.0
61.0
76.0
122
9.01
11.3
14.3
17.7
22.4
28.3
35.8
56.6
70.4
87.8
141
10.1
12.7
16.0
19.8
25.0
31.6
40.0
63.3
78.8
98.1
158
11.9
15.0
18.9
23.4
29.6
37.4
47.4
74.8
93.2
116
186
14.2
17.9
22.6
27.9
35.4
44.7
56.6
89.5
111
139
223
Assembly fittings coding
Size
Standard size 3/8
Large size 3/4
Locknut
Welding nipple
Male nipple
Seal
VAA 0038 xx
VAA 0075 xx
ZAA 1738 xx
ZAA 2775 xx
ZHA 3838 xx
ZHA 7575 xx
VDA 0038 P7
VDA 0075 P7
33
34
www.pnr-nozzles.com
DOVETAIL FLAT JET TIPS
GY
14,7
12
12,2
23,8
14
STANDARD AND LARGE CAPACITIES
GY flat jet nozzle tips are usually mounted onto a pipe by means of a
welded nipple, and secured in place with a retaining nut. They can
therefore easily be replaced and their dovetail connection assures
precise assembly at all times, since the nozzle can be assembled only
when the flat jet is properly oriented. The tip models shown on this
page deliver the most popular capacity values, while larger capacities
and sizes can be manufactured on request, and delivered complete
with matching nipple and retaining nuts.
The two sizes shown are to be assembled onto 3/8 and 3/4 nipples,
see nipple and retaining nut codes at the bottom of the next page.
Materials
20
How to compose the
nozzle code
The nozzle tips shown on this
page can be supplied with six
different spray angles, whose
value is indicated by the third
digit in the nozzle code.
Therefore, the nozzle tip code
has to be identified as in the
following example.
B1
B31
T1
AISI 303 Stainless steel
AISI 316L Stainless steel
Brass
Dovetail nipples
GY type tips are assembled onto their own series of matching dovetail
nipples, to assure perfect alignment: the two tip sizes require nipples
and caps as shown in the table below.
Please note that the right flat jet orientation with jets inclined so as not
to disturb each other is automatically obtained welding the nipples in
place with their dovetail aligned along the pipe axis.
This is easily done by running a straight rule across the dovetail profile
machined on the nipple.
GYQ 1780 B31
60
Spray angle codes
Codes for the different spray
angles are listed in the table
adjacent.
Welding nipples
ZAC 1738 xx
GYA
0
GYF
30
GYM
45
GYQ
60
GYU
90
GYW
120
Typical assembly with dovetail nipple and nut.
ZAC 2775 xx
See values for jet deviation angle () beside capacity tables
next page.
www.pnr-nozzles.com
DOVETAIL FLAT JET TIPS
GY
STANDARD AND LARGE CAPACITIES
Jet deviation angle = 5
Standard capacity tips
GYF GYM GYQ GYU GYW
Code
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2194
Capacity
at different pressure values
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
5.85
7.20
9.20
1.34
1.65
2.19
2.72
3.46
4.11
5.52
6.93
8.77
10.8
13.8
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
Jet deviation angle = 15
Large capacity tips
GYA GYF GYM GYQ GYU GYW
Code
1781
1981
2125
2154
2195
2246
2311
2490
2610
2760
3122
Capacity
at different pressure values
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
3.18
4.00
5.06
6.25
7.92
10.0
12.7
20.0
24.9
31.0
49.8
4.50
5.66
7.16
8.83
11.2
14.1
17.9
28.3
35.2
43.9
70.4
5.52
6.93
8.77
10.8
13.7
17.3
21.9
34.6
43.1
53.7
86.3
6.37
8.00
10.1
12.5
15.8
20.0
25.3
40.0
49.8
62.1
99.6
7.80
9.80
12.4
15.3
19.4
24.5
31.0
49.0
61.0
76.0
122
9.01
11.3
14.3
17.7
22.4
28.3
35.8
56.6
70.4
87.8
141
10.1
12.7
16.0
19.8
25.0
31.6
40.0
63.3
78.8
98.1
158
11.9
15.0
18.9
23.4
29.6
37.4
47.4
74.8
93.2
116
186
14.2
17.9
22.6
27.9
35.4
44.7
56.6
89.5
111
139
223
Assembly fittings coding
Size
Standard size 3/8
Large size 3/4
(lpm)
(bar)
Locknut
Welding nipple
VAA 0040 xx
VAA 0075 xx
ZAC 1738 xx
ZAC 2775 xx
35
36
www.pnr-nozzles.com
QUICK-CONNECT NOZZLES
HT
STANDARD AND LARGE CAPACITY
22
Flat jets of the HT series offer the same quality and specifications as
our standard nozzle types, with the additional convenience of a
bayonet coupling which allows not only for a simple assembly without
any tool being required but also for automatic spray pattern alignment.
The optimum performance of your system or machine is then
conveniently safeguarded, with a noticeable reduction in service cost
and production loss for system downtime .
We offer capacities from 3.1 to 78 lpm over the standard range of spray
angles, and a matching range of male, female or welding nipples.
28
Materials
B1
B3
T1
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
Standard capacity tips
HTA
0
HTL HTN HTR HTV
40 50
65 95
HTJ
110
Code
Capacity
at different pressure values
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
1.79
2.22
2.83
3.35
4.50
5.66
5.85
7.20
9.20
2.19
2.72
3.46
4.11
5.52
6.93
8.77
10.8
13.8
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
1310
1385
1490
1581
1780
1980
2124
2153
2194
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
HTJ
110
Code
Capacity
at different pressure values
Large capacity tips
HTA
0
HTL HTN HTR HTV
40 50 65 95
2310
2390
2470
2590
2780
(lpm)
(bar)
0.5
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
12.7
15.9
19.2
24.1
22.5
17.9
22.5
27.1
34.1
45.0
21.9
27.6
33.2
41.7
55.2
25.3
31.8
38.4
48.2
63.7
31.0
39.0
47.0
59.0
78.0
35.8
45.0
54.3
68.1
90.1
40.0
50.3
60.7
76.2
101
47.4
59.6
71.8
90.1
119
56.6
71.2
85.8
108
142
Ordering Codes
Thread size
Standard size
Large size
inch
Male nipple
1/4
3/8
1/2
3/8
Female nipple
Welding nipple
Seal (Viton) for SS nipples
Seal (BUNA) for brass nipples
All
All
ZHS 0025 xx
ZHS 0038 xx
ZHS 0050 xx
ZHT
ZHU
VDH
VDH
0038
0038
0026
0026
xx
xx
E7
E8
D
WS
H
ZHS 0025 xx
ZHS 0050 xx
RG
WS
mm mm mm
ZHU 0038 xx
ZHU 0050 xx
VDH 0050 E7
VDH 0050 E8
29
29
35
29
32
22
22
30
22
28
www.pnr-nozzles.com
FLAT JET NOZZLES
J
1/4
LOW CAPACITY TYPES
These standard model flat jet nozzles are available in a very wide
range of capacities, spray angles and materials. The connection
thread is tapered in order to easily allow for both a tight connection
and a correct spray pattern orientation. Nozzles shown on this page
cover the low to minimal capacity range from 0.06 to 1.60 litres per
minute. The tiny outlet orifices, made on high precision machine
tooling may require to be protected against plugging by means of
adequate filtering in the supply line, depending upon the quantity
and type of solids suspended in the liquid.
Materials
B1
B3
T1
13
26
14
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
How to compose the
nozzle code
Low capacity nozzle bodies as shown on this page may be supplied on
request with an internal thread, allowing for assembly of individual
filters on each nozzle. See detailed specification on VEF filter
cartridges in our Accessories Catalogue CTG AC20.
The nozzle shown on this page
can be supplied with eight
different spray angles, whose
value is indicated by the third
digit in the nozzle code.
Therefore, the nozzle code has
to be identified as in the
following example.
Materials and minimum capacities
Because of the extreme difficulty to work hard materials such as
stainless steels with very small profile drills not all the capacity sizes
shown in the nozzle table are available in all materials. The table below
shows the minimum capacity values we can produce for each given
material. Please contact our offices for information on the maximum
spray angle available for each capacity and material.
JBR 0780 B3
65
Codes for the different spray
angles are listed in the table
beside.
JBD
25
JBL JBN
40 50
JBR
65
JBS
75
JBT
80
JBV
95
JBJ
110
Code
Capacity
at different pressure values
0.7
0060
0100
0130
0150
0200
0260
0390
0590
0780
1120
1160
0.28
0.38
0.58
0.77
(lpm)
(bar)
1.0
1.5
2.0
3.0
4.0
5.0
7.0
10
0.09
0.12
0.15
0.23
0.34
0.45
0.69
0.92
0.04
0.07
0.09
0.11
0.14
0.18
0.28
0.42
0.55
0.85
1.13
0.05
0.08
0.11
0.12
0.16
0.21
0.32
0.48
0.64
0.98
1.31
0.06
0.10
0.13
0.15
0.20
0.26
0.39
0.59
0.78
1.20
1.60
0.07
0.12
0.15
0.17
0.23
0.30
0.45
0.68
0.90
1.39
1.85
0.08
0.13
0.17
0.19
0.26
0.34
0.50
0.76
1.01
1.55
2.07
0.09
0.15
0.20
0.23
0.31
0.40
0.60
0.90
1.19
1.83
2.44
0.11
0.18
0.24
0.27
0.37
0.47
0.71
1.08
1.42
2.19
2.92
Materials and minimum capacities
Material
0060
0100
0130
0150
0200
0260
0390
0590
0780
1120
1160
AISI 316
AISI 303
Brass
37
38
www.pnr-nozzles.com
FLAT JET NOZZLES
J
RG
STANDARD CAPACITY TYPES
The standard model flat jet nozzles are available in a very wide range
of capacities, spray angles and materials. The connection thread is
tapered in order to easily allow for both a tight connection and a
correct spray pattern orientation. Nozzles shown on this page cover
the standard capacity range from 1.5 to 47 litres per minute,
delivering high impact jets with small/medium size droplets for the
flat spray patterns. Capacity tables also include straight jet types,
with spray angle value shown as 0 They can be made on request
out of any machineable material, in addition to the standard
materials shown below.
H1
H
WS
Materials
B1
B3
T1
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
Spray angle codes
JBA
JBC
JBF
JBM
JBQ
JBU
JBW
20
30
45
60
90
120
Thread size code (RG)
JA
1/8
How to compose the
nozzle code
The nozzles shown on this
page can be supplied with
seven different spray angles,
whose value is indicated by
the third digit in the nozzle
code. Therefore, the nozzle
tip code has to be identified
as in the following example.
JBQ 1780 B3
60
Codes for the different spray
angles are listed in the table
adjacent.
JAA
JBA
JCA
JB
1/4
Code
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
JC
3/8
Capacity
at different pressure values
(lpm)
(bar)
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
Dimensions and weights
Code
Size
H1
WS
inch
mm
mm
mm
gram
JA
1/8
19.5
11
12
JB
1/4
22
12
14
18
JC
3/8
25
14
17
34
www.pnr-nozzles.com
FLAT JET NOZZLES
J
STANDARD CAPACITY TYPES
JAC
20
JAF
30
JAM
45
JBC
JCC
Code
Capacity
at different pressure values
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
JBF
JCF
Code
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
Code
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
JBM JCM
Spray angle codes
JBA
0
JBC
20
(lpm)
(bar)
JBF
30
Thread size code (RG)
JBM
45
JBQ
60
JBU
90
JBW
120
JA
1/8
JB
1/4
JC
3/8
39
40
www.pnr-nozzles.com
FLAT JET NOZZLES
J
STANDARD CAPACITY TYPES
How to compose the
nozzle code
The nozzles shown on this page
can be supplied with seven
different spray angles, whose
value is indicated by the third
digit in the nozzle code.
Therefore, the nozzle tip code
has to be identified as in the
following example.
JAQ
60
JBQ 1780 B3
60
Codes for the different spray
angles are listed in the table at
the bottom of the page.
JAU
90
JAW
120
JBQ JCQ
JBU JCU
JBW JCW
Code
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
Capacity
at different pressure values
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
Code
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
Code
0.5
1.0
2.0
3.0
4.0
5.0
7.0
10
20
1153
1190
1233
1310
1385
1490
1581
1780
1980
2124
2153
2195
2245
2274
2310
2390
2470
0.62
0.78
0.95
1.27
1.57
2.00
2.37
3.18
4.00
5.06
6.25
7.96
10.0
11.2
12.7
15.9
19.2
0.88
1.10
1.35
1.79
2.22
2.83
3.35
4.50
5.66
7.16
8.83
11.3
14.1
15.8
17.9
22.5
27.1
1.25
1.55
1.90
2.53
3.14
4.00
4.74
6.37
8.00
10.1
12.5
15.9
20.0
22.4
25.3
31.8
38.4
1.53
1.90
2.33
3.10
3.85
4.90
5.81
7.80
9.80
12.4
15.3
19.5
24.5
27.4
31.0
39.0
47.0
1.77
2.19
2.69
3.58
4.45
5.66
6.71
9.01
11.3
14.3
17.7
22.5
28.3
31.6
35.8
45.0
54.3
1.98
2.45
3.01
4.00
4.97
6.33
7.50
10.1
12.7
16.0
19.8
25.2
31.6
35.4
40.0
50.3
60.7
2.34
2.90
3.56
4.74
5.88
7.48
8.87
11.9
15.0
18.9
23.4
29.8
37.4
41.9
47.4
59.6
71.8
2.79
3.47
4.25
5.66
7.03
8.95
10.6
14.2
17.9
22.6
27.9
35.6
44.7
50.0
56.6
71.2
85.8
3.95
4.91
6.02
8.00
9.94
12.6
15.0
20.1
25.3
32.0
39.5
50.3
63.3
70.7
80.0
100
121
Spray angle codes
JBA
0
JBC
20
JBF
30
(lpm)
(bar)
Thread size code (RG)
JBM
45
JBQ
60
JBU
90
JBW
120
JA
1/8
JB
1/4
JC
3/8
41
www.pnr-nozzles.com
FLAT JET NOZZLES
J
LARGE CAPACITY TYPES
RG
The standard model flat jet nozzles are available in a very wide range of
capacities, spray angles and materials. The connection thread is tapered
in order to easily allow for both a tight connection and a correct spray
pattern orientation. Nozzles shown on this page cover the standard
capacity range from 59 to 435 litres per minute, delivering high impact jets
with medium size droplets and with flat spray patterns. Capacity tables
also include straight jet types, with spray angle value shown as 0. They
can be made on request out of any machineable material, in addition to the
standard materials shown below.
Materials
B1
B3
T1
1/2
3/4
25
40
50
65
80
95
H
WS
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
15
H1
Code
JDA 2590 xx
JDA 2780 xx
JEA 3134 xx
JEA 3275 xx
JFA 3390 xx
JFA 3435 xx
JDB 2195 xx
JDB 2274 xx
JDB 2390 xx
JEB 2990 xx
JDD 2390 xx
JDD 2590 xx
JDD 2780 xx
JFD 3195 xx
JDL 2195 xx
JDL 2240 xx
JDL 2274 xx
JDL 2390 xx
JDL 2590 xx
JDN 2274 xx
JDN 2390 xx
JDN 2590 xx
JDN 2780 xx
JEN 3158 xx
JFN 3195 xx
JFN 3230 xx
JDR 2195 xx
JDR 2240 xx
JDR 2274 xx
JDR 2390 xx
JDR 2590 xx
JFR 2780 xx
JDT 2195 xx
JDT 2240 xx
JDT 2274 xx
JDT 2390 xx
JDT 2590 xx
JDT 2780 xx
JET 2780 xx
JET 3158 xx
JDV 2195 xx
JDV 2240 xx
JDV 2274 xx
JDV 2390 xx
JDV 2590 xx
Spray angle
codes
Capacity
at different pressure values
(lpm)
(bar)
0.5
1.0
2.0
3.0
4.0
5.0
7.0
24.1
31.8
54.7
112
159
178
7.96
11.2
15.9
40.4
15.9
24.1
31.8
79.6
7.96
9.80
11.2
15.9
24.1
11.2
15.9
24.1
31.8
64.5
79.6
93.9
7.96
9.80
11.2
15.9
24.1
31.8
7.96
9.80
11.2
15.9
24.1
31.8
31.8
64.5
7.96
9.80
11.2
15.9
24.1
34.1
45.0
77.4
159
225
251
11.3
15.8
22.5
57.2
22.5
34.1
45.0
113
11.3
13.9
15.8
22.5
34.1
15.8
22.5
34.1
45.0
91.2
113
133
11.3
13.9
15.8
22.5
34.1
45.0
11.3
13.9
15.8
22.5
34.1
45.0
45.0
91.2
11.3
13.9
15.8
22.5
34.1
48.2
63.7
109
225
318
355
15.9
22.4
31.8
80.8
31.8
48.2
63.7
159
15.9
19.6
22.4
31.8
48.2
22.4
31.8
48.2
63.7
129
159
188
15.9
19.6
22.4
31.8
48.2
63.7
15.9
19.6
22.4
31.8
48.2
63.7
63.7
129
15.9
19.6
22.4
31.8
48.2
59.0
78.0
134
275
390
435
19.5
27.4
39.0
99.0
39.0
59.0
78.0
195
19.5
24.0
27.4
39.0
59.0
27.4
39.0
59.0
78.0
158
195
230
19.5
24.0
27.4
39.0
59.0
78.0
19.5
24.0
27.4
39.0
59.0
78.0
78.0
158
19.5
24.0
27.4
39.0
59.0
68.1
90.1
155
318
450
502
22.5
31.6
45.0
114
45.0
68.1
90.1
225
22.5
27.7
31.6
45.0
68.1
31.6
45.0
68.1
90.1
182
225
266
22.5
27.7
31.6
45.0
68.1
90.1
22.5
27.7
31.6
45.0
68.1
90.1
90.1
182
22.5
27.7
31.6
45.0
68.1
76.2
101
173
355
503
562
25.2
35.4
50.3
128
50.3
76.2
101
252
25.2
31.0
35.4
50.3
76.2
35.4
50.3
76.2
101
204
252
297
25.2
31.0
35.4
50.3
76.2
101
25.2
31.0
35.4
50.3
76.2
101
101
204
25.2
31.0
35.4
50.3
76.2
90.1
119
205
420
596
664
29.8
41.9
59.6
151
59.6
90.1
119
298
29.8
36.7
41.9
59.6
90.1
41.9
59.6
90.1
119
241
298
351
29.8
36.7
41.9
59.6
90.1
119
29.8
36.7
41.9
59.6
90.1
119
119
241
29.8
36.7
41.9
59.6
90.1
10
20
108
152
142
201
245
346
502
710
712 1007
794 1123
35.6 50.3
50.0 70.7
71.2
101
181
256
71.2
101
108
152
142
201
356
503
35.6 50.3
43.8 62.0
50.0 70.7
71.2
101
108
152
50.0 70.7
71.2
101
108
152
142
201
288
408
356
503
420
594
35.6 50.3
43.8 62.0
50.0 70.7
71.2
101
108
152
142
201
35.6 50.3
43.8 62.0
50.0 70.7
71.2
101
108
152
142
201
142
201
288
408
35.6 50.3
43.8 62.0
50.0 70.7
71.2
101
108
152
JDA
JDB
JDD
JDL
JDN
JDR
JDT
JDV
0
15
25
40
50
65
80
95
Dimensions
and weights
Code
JD JE
Size inch 1/2 3/4
H mm
33 41
17 20
H1 mm
WS mm
22 27
W grams 65 130
JF
1
61
22
27
215
42
www.pnr-nozzles.com
FLAT JET NOZZLES
K
14.7
18
KX
RG
H1
LARGE SPRAY ANGLE
K flat jet nozzles work on the deflection principle conveying a water
vein onto a machined deflection surface, and produce a jet with a wide
angle flat spray pattern, medium impact value and medium size
droplets.
Their round outlet orifice and unobstructed inside passage minimize
plugging risks.
K style nozzles shown on the next page are available with a threaded
connection and, for capacity sizes from 0390 to 2310 also as a nozzle
tip for assembly onto a nipple by means of a retaining nut.
Materials
B1
B3
T1
WS
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
Thread size and dimensions
Code
How to compose the
nozzle code
The nozzle shown on the next
page can be supplied with same
capacity and with different
connection threads, the size is
indicated by the second digit in
the nozzle code. Therefore, the
nozzle code has to be identified
as in the following example.
RG
H1
WS
inch
mm
mm
mm
KGW
1/8
31
10
14
KHW
1/4
34
12.5
14
KIW
3/8
44
13
17
KJW
1/2
49
17
22
KKW
3/4
65
20
36
KLW
92
26
46
Nozzle dimensions
Some nozzles may have different dimensions even
when made with the same thread.
Dimensions given above refer always to the largest
nozzle with a given thread size.
Please refer to our offices for detailed information.
KJW 2470 B3
1/2
Typical applications
Washing of fruits, vegetables, crushed stones and any
other product moving on a conveyor.
Cooling and washing of vertical surfaces and also for fire
fighting purposes.
www.pnr-nozzles.com
FLAT JET NOZZLES
K
LARGE SPRAY ANGLE
KGW KHW KIW KJW KKW KLW KXW
D
mm
0.6
0.7
0.8
1.0
1.1
1.3
1.4
1.6
1.8
2.3
2.6
2.9
3.3
3.6
3.8
4.0
4.1
4.4
4.5
5.0
5.3
5.6
6.0
6.5
7.1
7.5
8.0
8.4
8.7
9.3
10.3
11.0
11.4
12.2
14.6
17.9
Code
0390
0590
0780
1120
1160
1200
1230
1310
1390
1590
1780
1940
2117
2141
2157
2172
2188
2210
2230
2270
2310
2350
2390
2470
2550
2630
2700
2780
2860
2940
3110
3125
3141
3164
3235
3350
Capacity
at different pressure values
0.5
1.0
2.0
3.0
4.0
5.0
7.0
1.5
4.0
0.16
0.24
0.32
0.49
0.65
0.82
0.94
1.27
1.59
2.41
3.18
3.84
4.78
5.76
6.41
7.02
7.68
8.57
9.39
11.0
12.7
14.3
15.9
19.2
22.5
25.7
28.6
31.8
35.1
38.4
44.9
51.0
57.6
67.0
95.9
143
0.23
0.34
0.45
0.69
0.92
1.15
1.33
1.79
2.25
3.41
4.50
5.43
6.75
8.14
9.06
9.93
10.9
12.1
13.3
15.6
17.9
20.2
22.5
27.1
31.8
36.4
40.4
45.0
49.7
54.3
63.5
72.2
81.4
94.7
136
202
0.32
0.48
0.64
0.98
1.31
1.63
1.88
2.53
3.18
4.82
6.37
7.68
9.55
11.5
12.8
14.0
15.4
17.1
18.8
22.0
25.3
28.6
31.8
38.4
44.9
51.4
57.2
63.7
70.2
76.8
89.8
102
115
134
192
286
0.39
0.59
0.78
1.20
1.60
2.00
2.30
3.10
3.90
5.90
7.80
9.40
11.7
14.1
15.7
17.2
18.8
21.0
23.0
27.0
31.0
35.0
39.0
47.0
55.0
63.0
70.0
78.0
86.0
94.0
110
125
141
164
235
350
0.45
0.68
0.90
1.39
1.85
2.31
2.66
3.58
4.50
6.81
9.01
10.9
13.5
16.3
18.1
19.9
21.7
24.2
26.6
31.2
35.8
40.4
45.0
54.3
63.5
72.7
80.8
90.1
99.3
109
127
144
163
189
271
404
0.50
0.76
1.01
1.55
2.07
2.58
2.97
4.00
5.03
7.62
10.1
12.1
15.1
18.2
20.3
22.2
24.3
27.1
29.7
34.9
40.0
45.2
50.3
60.7
71.0
81.3
90.4
101
111
121
142
161
182
212
303
452
0.60
0.90
1.19
1.83
2.44
3.06
3.51
4.74
5.96
9.01
11.9
14.4
17.9
21.5
24.0
26.3
28.7
32.1
35.1
41.2
47.4
53.5
59.6
71.8
84.0
96.2
107
119
131
144
168
191
215
251
359
535
90
105
110
105
110
120
110
120
130
120
130
140
110
120
120
125
130
135
110
115
125
130
130
135
135
140
130
135
135
140
125
130
130
135
130
130
120
120
125
122
130
130
125
130
140
130
140
150
120
130
130
135
140
145
120
125
135
140
140
140
145
150
140
145
145
150
135
135
135
145
135
135
Assembly accessories
KXW tips are normally secured with a
retaining nut onto a welded nipple.
All details on accessories are shown in
our Catalogue CTG AC20.
ZAA 1738 xx
VAA 0038 xx
(lpm) Spray angle
(bar) at press (bar)
43
44
www.pnr-nozzles.com
FLAT JET NOZZLES
K
RG
HIGH IMPACT TYPES
K flat jet nozzles work on the deflection principle conveying a water
vein onto a deflection surface designed to produce a narrow jet with
flat spray pattern, high impact value and medium size droplets.
Their round outlet orifice and unobstructed inside passages minimize
plugging risks.
K style nozzles shown in this page are available with a threaded
connection and, for the capacity sizes shown in the table, with a
quick coupling connection for assembly onto the matching quick
connection nipple.
H
SQ
CL
Materials
B1
B3
T1
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
How to compose the
nozzle code
Thread size
code
KOx
1/8
KPx
1/4
KQx
3/8
KRx
1/2
KSx
3/4
KTx
QC
The nozzle shown on this page
can be supplied with same
capacity and a different
connection thread, the size is
indicated by the second digit in
the nozzle code. Therefore, the
nozzle code has to be identified
as in the following example.
KQB 2195 B3
3/8
Quick coupling nipples
Thread size
inch
Standard size
1/4
3/8
1/2
3/8
ZHS 0025 xx
ZHS 0038 xx
Male nipple
Female nipple
Welding nipple
Seal (Viton) for SS nipples
Seal (BUNA) for brass nipples
All
All
ZHS 0050 xx
ZHT
ZHU
VDH
VDH
0038
0038
0026
0026
xx
xx
E7
E8
D
WS
H
ZHS 0025 xx
ZHS 0050 xx
RG
Large size
ZHU 0038 xx
ZHU 0050 xx
VDH 0050 E7
VDH 0050 E8
H WS D
mm mm mm
29
29
35
29
32
22
22
30
22
28
www.pnr-nozzles.com
FLAT JET NOZZLES
K
HIGH IMPACT TYPES
1/8 1/4 3/8 1/2 3/4
15
QC
KPB
KPB
KQB
KQB
KQB
KRB
KRB
KRB
KSB
25
35
KPD
KOH
KPH
KPH
KQH
KQH
KQH
KQH
KQH
KRH
KRH
KRH
KTH
KTH
KSH
KSH
40
50
KQL
KQL
KQL
KQL
KQL
KQL
KQL
KPN
KPN KQN
KPN KQN
KQN
KQN
KQN
KQN
KQN
Code
1390
1780
2117
2156
2195
2230
2310
2390
2780
2156
1160
1390
1780
1980
2117
2156
2195
2230
2310
2390
2630
2780
2156
2195
2230
2270
2310
2350
2390
1390
1980
2156
2230
2390
2490
2630
2780
DIA
mm
1.9
2.6
3.2
3.7
4.2
4.6
5.3
5.9
8.4
3.7
1.2
1.9
2.6
2.9
3.3
3.7
4.1
4.5
5.3
5.9
7.5
8.4
3.7
4.1
4.5
5.0
5.2
5.7
6.0
1.9
2.9
3.7
4.5
6.0
6.7
7.5
8.4
Capacity
at different pressure values
(lpm)
(bar)
2.0
3.0
4.0
5.0
6.0
7.0
3.18
1780
9.55
12.7
15.9
18.8
25.3
31.8
63.7
12.7
1.31
3.18
6.37
8.00
9.55
12.7
15.9
18.8
25.3
31.8
51.4
63.7
12.7
15.9
18.8
22.0
25.3
28.6
31.8
3.18
8.00
12.7
18.8
31.8
40.0
51.4
63.7
3.90
6.37
11.7
15.6
19.5
23.0
31.0
39.0
78.0
15.6
1.60
3.90
7.80
9.80
11.7
15.6
19.5
23.0
31.0
39.0
63.0
78.0
15.6
19.5
23.0
27.0
31.0
35.0
39.0
3.90
9.80
15.6
23.0
39.0
49.0
63.0
78.0
4.50
7.80
13.5
18.0
22.5
26.6
35.8
45.0
90.1
18.0
1.85
4.50
9.01
11.3
13.5
18.0
22.5
26.6
35.8
45.0
72.7
90.1
18.0
22.5
26.6
31.2
35.8
40.4
45.0
4.50
11.3
18.0
26.6
45.0
56.6
72.7
90.1
5.03
9.01
15.1
20.1
25.2
29.7
40.0
50.3
101
20.1
2.07
5.03
10.1
12.7
15.1
20.1
25.2
29.7
40.0
50.3
81.3
101
20.1
25.2
29.7
34.9
40.0
45.2
50.3
5.03
12.7
20.1
29.7
50.3
63.3
81.3
101
5.52
10.1
16.5
22.1
27.6
32.5
43.8
55.2
110
22.1
2.26
5.52
11.0
13.9
16.5
22.1
27.6
32.5
43.8
55.2
89.1
110
22.1
27.6
32.5
38.2
43.8
49.5
55.2
5.52
13.9
22.1
32.5
55.2
69.3
89.1
110
5.96
11.0
17.9
23.8
29.8
35.1
47.4
59.6
119
23.8
2.44
5.96
11.9
15.0
17.9
23.8
29.8
35.1
47.4
59.6
96.2
119
23.8
29.8
35.1
41.2
47.4
53.5
59.6
5.96
15.0
23.8
35.1
59.6
74.8
96.2
119
Nozzle dimensions
Some nozzles may have different dimensions even when made with the
same thread.
Dimensions given above refer always to the largest nozzle with a given
thread size.
Please refer to our offices for detailed information.
Typical Applications
Washing of fruits, vegetables, crushed stones and any other product
moving on a conveyor.
High pressure cleaning processes
Felt washing in paper making machines.
CL
deg
H
SQ
mm mm
10
7.12
22
11.9 14.2
21.4
25
28.5
18
35.6
15
42.0
14
56.6
71.2
142
14
28.5
25
2.92
40
7.12
36
14.2
30
17.9
28
21.4
28
28.5
26
35.6
23
42.0
22
56.6
24
71.2
19
115
23
142
22
28.5
35
35.6
33
42.0
33
49.3
29
56.6
26
63.9
28
71.2
28
7.12
60
17.9
42
28.5
45
42.0
37
71.2
40
89.5
38
115
37
142
32
48
19
72
92
90
125
130
137
191
65
23
37
43
49
52
58
64
73
81
89
114
122
60
64
72
75
77
77
87
31
41
47
55
72
72
72
72
15
54
20
25
30
20
12
15
20
25
32
25
15
20
25
30
45
46
www.pnr-nozzles.com
HOLLOW CONE NOZZLES RANGE OVERVIEW
Hollow cone nozzles produce a conical spray pattern, where drops are distributed onto the outer
surface of the conical shape. They are used in many different applications, typically creating a
droplet curtain inside a cylindrical tower for applications like smoke scrubbing, dedusting and
cooling or to cool wide surfaces like the outside of LPG storage tanks.
Our range of hollow cone nozzles is shown on the following pages, and additional information
about the different types and designs of hollow cone nozzles can be found on page 4 in this
Catalogue. The table below lists the different types available, and gives basic information about
their specific features, so as to make the choice easier for a given application.
Accessories available for each nozzle type are usually shown on the single Catalog pages.
Three basic types of hollow cone nozzles are available, that is:
Turbulence nozzles, tangential spray.
Conical spray pattern axis at 90 with respect to feed pipe axis.
Offer small size droplets, standard and wide angles (very wide angles on request).
Turbulence nozzles, in line spray.
Conical spray pattern in line with the feed pipe axis.
General specifications similar to off-line types.
Deflection nozzles, in line spray.
Conical spray pattern in line with feed pipe axis.
Highest resistance to clogging.
All nozzle types, with the exception of turbulence types, do not need any inside part or vane to
produce the spray pattern, and are therefore relatively resistant to clogging dangers.
Type
Connection
Specifications
Applications
Page
Turbulence nozzles, tangential
PA / PB
PE / PF
PN / PO
Female thread
Female / Male thread
Female / Male thread
Forged / Cast
Machined from bar stock
Moulded plastic
General purpose
General purpose
General purpose
47
48
50
Turbulence nozzles, axial
RA
RB
RX / RZ
Female thread
Male thread
Male thread
Fine spray, small passages
Fine spray, clog resistant
Low and very low capacity
Humidification
Dust control
Humidification
51
52
54
Deflection nozzles, axial
RC
Male thread
Extra wide spray angle
Dust control
53
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
PA/PB
TANGENTIAL NOZZLES
PA type nozzles produce a hollow cone jet working on the tangential
flow principle, with a nominal spray angle of 90 and form a ring
shaped impact area. The nozzle has no internal vane and the
centrifugal force inside the whirl chamber provides the energy to
break up the liquid being sprayed. The narrowest section through
the nozzle is normally the water inlet diameter for standard angle
nozzles (shown as DE in the table below), and the outlet orifice for
the wide angle nozzles (shown as DU) these nozzles offer a
remarkable resistance to clogging and avoid costly downtime for
dismantling and cleaning operations. Sizes up to 3/4 are made out
of a drop-forged body, with an upper cover for nozzle cleaning.
Sizes from 1 and bigger are machined from a one piece casting.
Materials
B31
T1
Code
Material table
RF
inch
DE
mm
DU
mm
WS
PA
L
WS
RF
H
3/8
3/8
1/2
3.5
4.0
5.6
5.7
6.6
8.5
9.5
9.6
20x10
3/4
1+1/2 32x16
2
35x20
2+1/2 40x40
3/8
3.5
4.4
4.0
4.7
6.5
6.1
6.5
8.0
13.4
14.0
15.0
19.5
22.0
27.1
25.5
33.0
38.0
43.0
1/2
3/4
1
1+1/2
2
2+1/2
2.0
3.8
5.2
6.0
6.9
9.0
11.5
14.0
13.7
16.5
19.5
22.0
26.5
28.5
29.5
36.5
45.0
4.5
7.5
12
12
12
15
19
19
26
26
37
37
45
45
64
64
64
64
PB
Capacity
at different pressure values
1.23
2.12
2.69
3.64
6.96
10.1
13.3
23.1
30.7
46.5
61.3
77.2
93.0
115
155
191
2.69
3.10
4.05
6.58
6.96
10.1
13.3
23.1
30.7
46.5
61.3
77.2
93.0
115
155
191
210
(lpm)
(bar)
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
0.69
1.59
2.74
3.47
4.69
8.98
13.1
17.1
29.8
39.6
60.0
79.2
99.6
120
149
200
247
1.59
3.47
4.00
5.23
8.49
8.98
13.1
17.1
29.8
39.6
60.0
79.2
99.6
120
149
200
247
271
0.72
1.88
3.24
4.11
5.56
10.6
15.5
20.3
35.3
46.9
71.0
93.7
118
142
176
237
292
1.88
4.11
4.73
6.18
10.0
10.6
15.5
20.3
35.3
46.9
71.0
93.7
118
142
176
237
292
321
0.98
2.25
3.87
4.91
6.64
12.7
18.5
24.2
42.1
56.0
84.9
112
141
170
210
283
349
2.25
4.91
5.66
7.39
12.0
12.7
18.5
24.2
42.1
56.0
84.9
112
141
170
210
283
349
384
1.39
3.18
5.47
6.94
9.39
18.0
26.1
34.3
59.6
79.2
120
158
199
240
297
400
494
3.18
6.94
8.00
10.5
17.0
18.0
26.1
34.3
59.6
79.2
120
158
199
240
297
400
494
543
1.70
3.90
6.70
8.50
11.5
22.0
32.0
42.0
73.0
97.0
147
194
244
294
364
490
605
3.90
8.50
9.80
12.8
20.8
22.0
32.0
42.0
73.0
97.0
147
194
244
294
364
490
605
665
2.19
5.03
8.65
11.0
14.8
28.4
41.3
54.2
94.2
125
190
250
315
380
470
633
781
5.03
11.0
12.7
16.5
26.9
28.4
41.3
54.2
94.2
125
190
250
315
380
470
633
781
858
2.60
5.96
10.2
13.0
17.6
33.6
48.9
64.2
112
148
225
296
373
449
556
748
924
5.96
13.0
15.0
19.6
31.6
33.6
48.9
64.2
112
148
225
296
373
449
556
748
924
1016
3.10
7.12
12.2
15.5
21.0
40.2
58.4
76.7
133
177
268
354
445
537
665
895
1105
7.12
15.5
17.9
23.4
38.0
40.2
58.4
76.7
133
177
268
354
445
537
665
895
1105
1214
3/8
1/2
3/4
1+ 1 / 2
2+ 1 / 2
AISI 316L
Brass
AISI 316 L Stainless steel
Brass
0.3
70 PAS 1170 xx
90 PAU 1390 xx
PAU 1670 xx
PAU 1850 xx
PAU 2115 xx
PAU 2220 xx
PAU 2320 xx
PAU 2420 xx
PAU 2730 xx
PAU 2970 xx
PAU 3147 xx
PAU 3194 xx
PAU 3244 xx
PAU 3294 xx
PAU 3364 xx
PAU 3490 xx
PAU 3605 xx
130 PBY 1390 xx
PBY 1850 xx
PBY 1980 xx
PBY 2128 xx
PBY 2208 xx
PBY 2220 xx
PBY 2320 xx
PBY 2420 xx
PBY 2730 xx
PBY 2970 xx
PBY 3147 xx
PBY 3194 xx
PBY 3244 xx
PBY 3294 xx
PBY 3364 xx
PBY 3490 xx
PBY 3605 xx
PBY 3665 xx
RF
Dimensions
mm
H
WS
27
37
22
38
46
27
48
60
36
60
75
46
90
93
60
127
117
80
156
140
100
27
37
22
35
46
27
50
60
36
60
93
47
75
111
60
91
140
75
128
193
90
47
48
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
PE/PF
L
STANDARD ANGLE SPRAY NOZZLES
These hollow cone nozzles work on the tangential flow principle and
are manufactured by machine tool operation from metal bar stock.
This offers versatile construction of small and lessor sized nozzles.
In addition nozzles can be made on request from any special materials
and alloys that are available as a bar stock.
RF
PE
L
Materials
B1
B3
T1
RG
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
PF
L1
PT
Standard spray angle
RF
RG
PEN PFN PTN
Code
inch
50
70
DU
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
mm
mm
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
L1
8.0
7.7
9.5
6.1
7..0
9.0
7.35
8.98
15.9
8.69 10.4
10.6 12.7
18.8 22.5
14.7
18.0
31.8
18.0
22.0
39.0
23.2
28.4
50.3
27.5
33.6
59.6
32.9
40.2
71.2
24
34
35
3/8
RF
PES PFS PTS
Code
DE
DU
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
L1
1/8
0390
0780
1160
1230
1390
1630
1780
0781
1161
1231
1391
1631
1781
2117
1392
1632
1782
2118
2157
2196
2230
2197
2231
2310
2391
2470
2311
2392
2471
2550
2630
2700
2780
2860
2940
0.9
1.4
2.2
2.5
3.4
4.0
4.4
1.1
2.1
2.6
3.5
4.6
4.4
5.5
3.7
4.5
5.0
5.8
6.7
7.5
8.3
9.5
9.5
9.5
9.5
10.0
9.5
10.7
11.7
11.7
12.2
12.7
12.7
12.7
13.5
1.0
1.7
2.1
2.7
3.1
3.9
4.4
1.6
2.5
2.8
3.4
4.3
4.8
5.3
3.5
4.2
4.5
5.6
6.2
6.7
7.9
6.4
7.5
9.0
10.5
12.0
9.0
9.7
10.8
12.0
12.0
12.0
14.0
16.1
16.5
0.16
0.32
0.65
0.94
1.59
2.57
3.18
0.32
0.65
0.94
1.59
2.57
3.18
4.78
1.59
2.57
3.18
4.78
6.41
8.00
9.39
8.00
9.39
12.7
15.9
19.2
12.7
15.9
19.2
22.5
25.7
28.6
31.8
35.1
38.4
0.19
0.38
0.77
1.11
1.88
3.04
3.77
0.38
0.77
1.11
1.88
3.04
3.77
5.65
1.88
3.04
3.77
5.65
7.58
9.47
11.1
9.47
11.1
15.0
18.8
22.7
15.0
18.8
22.7
26.6
30.4
33.8
37.7
41.5
45.4
0.23
0.45
0.92
1.33
2.25
3.64
4.50
0.45
0.92
1.33
2.25
3.64
4.50
6.75
2.25
3.64
4.50
6.75
9.06
11.3
13.3
11.3
13.3
17.9
22.5
27.1
17.9
22.5
27.1
31.8
36.4
40.4
45.0
49.7
54.3
0.32
0.64
1.31
1.88
3.18
5.14
6.37
0.64
1.31
1.88
3.18
5.14
6.37
9.55
3.18
5.14
6.37
9.55
12.8
16.0
18.8
16.0
18.8
25.3
31.8
38.4
25.3
31.8
38.4
44.9
51.4
57.2
63.7
70.2
76.8
0.39
0.78
1.60
2.30
3.90
6.30
7.80
0.78
1.60
2.30
3.90
6.30
7.80
11.7
3.90
6.30
7.80
11.7
15.7
19.6
23.0
19.6
23.0
31.0
39.0
47.0
31.0
39.0
47.0
55.0
63.0
70.0
78.0
86.0
94.0
0.50
1.01
2.07
2.97
5.03
8.13
10.1
1.01
2.07
2.97
5.03
8.13
10.1
15.1
5.03
8.13
10.1
15.1
20.3
25.3
29.7
25.3
29.7
40.0
50.3
60.7
40.0
50.3
60.7
71.0
81.3
90.4
101
111
121
0.60
1.19
2.44
3.51
5.96
9.62
11.9
1.19
2.44
3.51
5.96
9.62
11.9
17.9
5.96
9.62
11.9
17.9
24.0
29.9
35.1
29.9
35.1
47.4
59.6
71.8
47.4
59.6
71.8
84.0
96.2
107
119
131
144
0.71
1.42
2.92
4.20
7.12
11.5
14.2
1.42
2.92
4.20
7.12
11.5
14.2
21.4
7.12
11.5
14.2
21.4
28.7
35.8
42.0
35.8
42.0
56.6
71.2
85.8
56.6
71.2
85.8
100
115
128
142
157
172
19
24
26
23
32
32
24
34
35
31
50
50
39
55
58
1/4
3/8
1/2
3/4
DE
2180
2220
2390
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
PE/PF
WIDE ANGLE SPRAY NOZZLES
Wide spray angle
RF
RG
PEW PFW PTW
Code
inch
120
1/8
1/4
3/8
1/2
3/4
0390
0780
1200
1230
1270
1320
1390
1510
1700
0781
1130
1160
1190
1271
1321
1391
1511
1600
1701
1780
1860
1940
2117
1512
1601
1702
1781
1861
1941
2102
2110
2118
2133
2157
2172
2196
2220
2391
2630
DE
DU
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
mm
mm
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
L1
09
1.4
1.5
2.0
2.2
2.1
3.6
3.4
4.5
1.4
1.4
1.4
2.0
2.2
2.2
3.6
3.4
3.4
4.2
3.7
4.0
5.0
5.8
3.5
3.5
4.2
3.7
4.0
5.0
4.5
5.0
5.0
6.1
5.0
6.2
6.2
6.2
9.0
10.3
1.1
1.5
3.9
3.4
3.8
4.5
3.1
5.0
5.2
1.5
3.6
4.0
2.3
3.8
4.5
3.1
5.0
5.2
5.2
6.0
5.6
5.7
2.4
5.0
5.2
5.2
6.0
5.6
5.7
6.9
6.2
6.7
8.0
9.0
7.5
8.4
9.7
10.5
15.0
0.16
0.32
0.82
0.94
1.10
1.31
1.59
2.08
2.86
0.32
0.53
0.65
0.78
1.10
1.31
1.59
2.08
2.45
2.86
3.18
3.51
3.84
4.78
2.08
2.45
2.86
3.18
3.51
3.84
4.16
4.49
4.78
5.43
6.41
7.02
8.00
8.98
15.9
25.7
0.19
0.38
0.97
1.11
1.30
1.55
1.88
2.46
3.38
0.38
0.63
0.77
0.92
1.30
1.55
1.88
2.46
2.90
3.38
3.77
4.15
4.54
5.65
2.46
2.90
3.38
3.77
4.15
4.54
4.93
5.31
5.65
6.42
7.58
8.31
9.47
10.6
18.8
30.4
0.23
0.45
1.15
1.33
1.56
1.85
2.25
2.94
4.04
0.45
0.75
0.92
1.10
1.56
1.85
2.25
2.94
3.46
4.04
4.50
4.97
5.43
6.75
2.94
3.46
4.04
4.50
4.97
5.43
5.89
6.35
6.75
7.68
9.06
9.93
11.3
12.7
22.5
36.4
0.32
0.64
1.63
1.88
2.20
2.61
3.18
4.16
5.72
0.64
1.06
1.31
1.55
2.20
2.61
3.18
4.16
4.90
5.72
6.37
7.02
7.68
9.55
4.16
4.90
5.72
6.37
7.02
7.68
8.33
8.98
9.55
10.9
12.8
14.0
16.0
18.0
31.8
51.4
0.39
0.78
2.00
2.30
2.70
3.20
3.90
5.10
7.00
0.78
1.30
1.60
1.90
2.70
3.20
3.90
5.10
6.00
7.00
7.80
8.60
9.40
11.7
5.10
6.00
7.00
7.80
8.60
9.40
10.2
11.0
11.7
13.3
15.7
17.2
19.6
22.0
39.0
63.0
0.50
1.01
2.58
2.97
3.49
4.13
5.03
6.58
9.04
1.01
1.68
2.07
2.48
3.49
4.13
5.03
6.58
7.75
9.04
10.1
11.1
12.1
15.1
6.58
7.75
9.04
10.1
11.1
12.1
13.2
14.2
15.1
17.2
20.3
22.2
25.3
28.4
50.3
81.3
0.60
1.19
3.06
3.51
4.12
4.89
5.96
7.79
10.7
1.19
1.99
2.44
2.90
4.12
4.89
5.96
7.79
9.17
10.7
11.9
13.1
14.4
17.9
7.79
9.17
10.7
11.9
13.1
14.4
15.6
16.8
17.9
20.3
24.0
26.3
29.9
33.6
59.6
96.2
0.71
1.42
3.65
4.20
4.93
5.84
7.12
9.31
12.8
1.42
2.37
2.92
3.50
4.93
5.84
7.12
9.31
11.0
12.8
14.2
15.7
17.2
21.4
9.31
11.0
12.8
14.2
15.7
17.2
19.0
20.0
21.4
24.3
28.7
31.4
35.8
40.2
71.2
115
19
24
26
23
32
32
24
34
35
31
39
50
55
50
58
Pipe clamp
Our Accessories Catalogue (CTG AC20) shows several types of pipe
clamps allowing for an easy assembly of hollow cone nozzles onto a
pipe manifold.
ZPM
49
50
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
PN/PO
L
MOULDED PLASTIC NOZZLES
L1
RF
WS
This range of hollow cone nozzles are made by plastic
moulding, out of top quality glassfiber reinforced polypropylene
with good mechanical strength and dimensional stability.
They produce small droplets , uniform distribution and are
corrosion resistant : prices are moderate and are ideal for
applications like air humidification, intensive product cooling
and gas washing. Together with our pipe clamps, they offer
the best solution in all cases where large quantity of nozzles
have to be easily assembled onto pipe manifolds.
Maximum operating temperature 75 C.
Materials
RF
RG
PNS POS
Code
inch
70
3/8
80
3/8
90
3/8
PNT POT
PNU POU
1/2
PNY POY
130
3/8
1/2
DE
DU
D6
Fiberglass reinforced PP
Capacity
at different pressure values
0.7
(lpm)
(bar)
1.0
2.0
3.0
5.0
7.0
10
0.98
1.39
1.70
2.19
2.60
3.10
0.7
1.0
2.0
3.0
5.0
7.0
1.26
1.50 2.12
2.60
3.36 3.97
Dimensions
mm
mm
mm
0.5
1170
2.0
2.9
0.69 0.82
L1
WS
31
44
20
22
Code
DE
DU
0.5
1260
2.7
3.5
1.06
Code
DE
DU
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
1390
1670
1850
2115
2220
2320
2398
3.7
4.4
5.2
6.1
7.2
9.5
8.5
3.8
5.2
5.6
6.3
9.2
10.5
14.0
1.59
2.74
3.47
4.69
8.98
13.1
16.2
1.88
3.24
4.11
5.56
10.6
15.5
19.2
2.25
3.87
4.91
6.64
12.7
18.5
23.0
3.18
5.47
6.94
9.39
18.0
26.1
32.5
3.90
6.70
8.50
11.5
22.0
32.0
39.8
5.03
8.65
11.0
14.8
28.4
41.3
51.4
5.96
10.2
13.0
17.6
33.6
48.9
60.8
7.12
12.2
15.5
21.0
40.2
58.4
72.7
42
Code
DE
DU
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
1170
1260
1390
1460
1570
1670
1850
1980
2128
2208
2220
2129
2209
2221
2320
2420
1.7
1.9
2.7
3.1
3.0
3.4
4.1
3.6
4.2
6.0
6.4
4.3
5.8
6.3
7.6
9.0
3.5
5.0
5.0
5.0
7.5
7.5
7.5
12
12
12
12
14
14
14
14
14
0.69
1.06
1.59
1.88
2.33
2.74
3.47
4.00
5.23
8.49
8.98
5.23
8.49
8.98
13.1
17.1
0.82
1.26
1.88
2.22
2.75
3.24
4.11
4.73
6.18
10.0
10.6
6.18
10.0
10.6
15.5
20.3
0.98
1.50
2.25
2.66
3.29
3.87
4.91
5.66
7.39
12.0
12.7
7.39
12.0
12.7
18.5
24.2
1.39
2.12
3.18
3.76
4.65
5.47
6.94
8.00
10.5
17.0
18.0
10.5
17.0
18.0
26.1
34.3
1.70
2.60
3.90
4.60
5.70
6.70
8.50
9.80
12.8
20.8
22.0
12.8
20.8
22.0
32.0
42.0
2.19
3.36
5.03
5.94
7.36
8.65
11.0
12.7
16.5
26.9
28.4
16.5
26.9
28.4
41.3
54.2
2.60
3.97
5.96
7.03
8.71
10.2
13.0
15.0
19.6
31.8
33.6
19.6
31.8
33.6
48.9
64.2
3.10
4.75
7.12
8.40
10.4
12.2
15.5
17.9
23.4
38.0
40.2
23.4
38.0
40.2
58.4
76.7
42
10
L1
WS
4.75
31
44
20
22
L1
WS
31
44
20
22
55
35
30
L1
WS
31
44
20
22
55
35
30
PO Male thread nozzles
For all 3/8 size nozzles we can supply PO type nozzles with
3/8 male thread.
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
RA
IN LINE SPRAY/INSIDE VANE
RF
RA nozzles work on the tangential jet principle and
produce a very fine spray with a hollow cone spray
pattern, in line with the inlet pipe. The carefully machined
inside vane has two precision machined spiral grooves,
which produce a wide range of capacities starting from
very low values. When low capacity nozzles are used,
because of the limited inner passages, it is recommended
that the spray manifold should be fitted with a filter of the
proper mesh size.
Materials
B31
T1
Code
80 RAT 0200 xx
RAT 0390 xx
60 RAQ 0490 xx
RAQ 0770 xx
RAQ 1122 xx
90 RAU 1208 xx
RAU 1306 xx
RAU 1490 xx
RAU 1612 xx
RAU 1772 xx
RAU 2104 xx
RAU 1491 xx
RAU 1551 xx
RAU 1686 xx
RAU 1980 xx
RAU 2137 xx
RAU 2153 xx
RAU 2196 xx
3/8
3/8
1/2
AISI 316 L Stainless steel
Brass
RF
inch
1/8
WS
D
mm
1.0
1.7
1.1
1.6
2.0
3.0
4.0
4.2
4.7
5.5
6.3
5.0
5.5
6.0
6.3
6.7
7.5
9.0
D1
mm
0.5
0.5
0.6
0.6
0.6
1.0
1.6
1.6
1.6
1.6
1.6
1.8
1.8
1.8
2.0
2.0
2.0
2.0
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
WS
0.08
0.16
0.20
0.31
0.50
0.85
1.25
2.00
2.50
3.15
4.25
2.00
2.25
2.80
4.00
5.59
6.45
8.00
0.10
0.19
0.24
0.37
0.59
1.00
1.48
2.37
2.96
3.73
5.02
2.37
2.66
3.31
4.73
6.62
7.63
9.47
0.12
0.23
0.28
0.44
0.70
1.20
1.77
2.83
3.53
4.46
6.00
2.83
3.18
3.96
5.66
7.91
9.12
11.3
0.16
0.32
0.40
0.63
1.00
1.70
2.50
4.00
5.00
6.30
8.49
4.00
4.49
5.60
8.00
11.2
12.9
16.0
0.20
0.39
0.49
0.77
1.22
2.08
3.06
4.90
6.12
7.72
10.4
4.90
5.50
6.86
9.80
13.7
15.8
19.6
0.26
0.50
0.63
0.99
1.58
2.69
3.95
6.33
7.90
10.0
13.4
6.33
7.10
8.86
12.7
17.7
20.4
25.3
0.31
0.60
0.75
1.18
1.86
3.18
4.67
7.48
9.35
11.8
15.9
7.48
8.40
10.5
15.0
20.9
24.1
29.9
0.37
0.71
0.89
1.41
2.23
3.80
5.59
8.95
11.2
14.1
19.0
8.95
10.0
12.5
17.9
25.0
28.8
35.8
18
17
29
22
29
22
36
27
51
52
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
RB
RG
IN LINE SPRAY / VANELESS
These nozzles produce a hollow cone spray pattern, in line with the
nozzle inlet pipe.
Their design, without any inside whirling vane, offers wide
unobstructed passages and minimizes clogging danger while
producing fine droplets.
The above characteristics make these nozzles the ideal solution for
dust suppression applications, specially suited for coal dust control.
H
WS
Materials
Code
60 RBQ 1160 xx
RBQ 1230 xx
RBQ 1390 xx
RBQ 1630 xx
RBQ 1780 xx
RBQ 2110 xx
70 RBS 1391 xx
RBS 1631 xx
RBS 1781 xx
RBS 2117 xx
RBS 2157 xx
RBS 2196 xx
RBS 1392 xx
RBS 1632 xx
RBS 1782 xx
RBS 2118 xx
RBS 2158 xx
RBS 2197 xx
RBS 2390 xx
80 RBT 2310 xx
RBT 2391 xx
RBT 2470 xx
RBT 2550 xx
RBT 2630 xx
RBT 2700 xx
RBT 2780 xx
RBT 2860 xx
RBT 2940 xx
Double inlet orifice
RG
inch
3/8
1/2
3/4
1+1/2
D
mm
2.0
2.4
3.3
3.9
4.4
4.4
3.3
4.0
4.5
5.1
6.1
7.1
3.3
4.2
4.7
5.4
6.4
7.7
9.5
10.0
9.5
11.1
12.7
14.3
15.0
15.9
17.1
18.3
D1
mm
2.0
2.4
2.9
3.8
4.0
*4.0
3.2
4.0
4.5
*4.4
*4.7
*5.2
3.3
4.2
4.5
5.4
6.4
7.1
*7.1
*7.9
*9.5
*9.5
*9.5
*9.5
*9.5
*9.5
*9.5
*9.5
B1
T1
AISI 303 Stainless steel
Brass
Capacity
at different pressure values
(lpm)
(bar)
Dimensions
mm
0.5
0.7
1.0
2.0
3.0
5.0
7.0
10
WS
0.65
0.94
1.59
2.57
3.18
4.49
1.59
2.57
3.18
4.82
6.45
7.96
1.59
2.57
3.18
4.82
6.45
7.96
15.9
12.7
15.9
19.2
22.5
25.7
28.6
31.8
35.1
38.4
0.77
1.11
1.88
3.04
3.77
5.31
1.88
3.04
3.77
5.70
7.63
9.42
1.88
3.04
3.77
5.70
7.63
9.42
18.8
15.0
18.8
22.7
26.6
30.4
33.8
37.7
41.5
45.4
0.93
1.33
2.25
3.64
4.50
6.35
2.25
3.64
4.50
6.81
9.12
11.3
2.25
3.64
4.50
6.81
9.12
11.3
22.5
17.9
22.5
27.1
31.8
36.4
40.4
45.0
49.7
54.3
1.31
1.88
3.18
5.14
6.37
8.98
3.18
5.14
6.37
9.63
12.9
15.9
3.18
5.14
6.37
9.63
12.9
15.9
31.8
25.3
31.8
38.4
44.9
51.4
57.2
63.7
70.2
76.8
1.60
2.30
3.90
6.30
7.80
11.0
3.90
6.30
7.80
11.8
15.8
19.5
3.90
6.30
7.80
11.8
15.8
19.5
39.0
31.0
39.0
47.0
55.0
63.0
70.0
78.0
86.0
94.0
2.07
2.97
5.03
8.13
10.1
14.2
5.03
8.13
10.1
15.2
20.4
25.2
5.03
8.13
10.1
15.2
20.4
25.2
50.3
40.0
50.3
60.7
71.0
81.3
90.4
101
111
121
2.44
3.51
5.96
9.62
11.9
16.8
5.96
9.62
11.9
18.0
24.1
29.8
5.96
9.62
11.9
18.0
24.1
29.8
59.6
47.4
59.6
71.8
84.0
96.2
107
119
131
144
2.92
4.20
7.12
11.5
14.2
20.1
7.12
11.5
14.2
21.5
28.8
35.6
7.12
11.5
14.2
21.5
28.8
35.6
71.2
56.6
71.2
85.8
100
115
128
142
157
172
31
17
37
22
43
32
69
50
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
RC
RG
IN LINE SPRAY
RC type nozzles produce a hollow cone spray pattern, in line with the
nozzle inlet pipe.
The spray is produced by deflection of the water flow against a fixed
plate in front of the nozzle orifice, which allows at the same time to
obtain an high efficiency, small drop size and very wide spray angles.
Materials
B1
T1
1/4
150
3/8
180
AISI 303 Stainless steel
Brass
Code
Capacity
at different pressure values
RCY 1780 xx
RCY 2117 xx
RCY 2157 xx
RCY 2196 xx
RCY 2230 xx
RCY 2270 xx
RCY 2310 xx
RCY 2350 xx
RCY 2390 xx
RCZ 1780 xx
RCZ 2117 xx
RCZ 2157 xx
RCZ 2196 xx
RCZ 2230 xx
RCZ 2270 xx
RCZ 2310 xx
RCZ 2350 xx
RCZ 2390 xx
0.5
0.7
9.39
11.0
12.7
14.3
15.9
5.70
7.58
9.42
11.1
13.0
15.0
16.9
18.8
9.39
11.0
12.7
14.3
15.9
5.70
7.58
9.42
11.1
13.0
15.0
16.9
18.8
(lpm)
(bar)
2.0
3.0
5.0
7.0
10
WS
4.50
6.81
9.06
11.3
13.3
15.6
17.9
20.2
22.5
4.50
6.81
9.06
11.3
13.3
15.6
17.9
20.2
22.5
6.37
9.63
12.8
15.9
18.8
22.0
25.3
28.6
31.8
6.37
9.63
12.8
15.9
18.8
22.0
25.3
28.6
31.8
7.80
11.8
15.7
19.5
23.0
27.0
31.0
35.0
39.0
7.80
11.8
15.7
19.5
23.0
27.0
31.0
35.0
39.0
10.1
15.2
20.3
25.2
29.7
34.9
40.0
45.2
50.3
10.1
15.2
20.3
25.2
29.7
34.9
40.0
45.2
50.3
11.9
18.0
24.0
29.8
35.1
41.2
47.4
53.5
59.6
11.9
18.0
24.0
29.8
35.1
41.2
47.4
53.5
59.6
14.2
21.5
28.7
35.6
42.0
49.3
56.6
63.9
71.2
14.2
21.5
28.7
35.6
42.0
49.3
56.6
63.9
71.2
33
17
44
22
33
17
44
22
RC series hollow cone nozzles are used mainly for air washing, dust
suppression and cooling processes.
The accessories shown below can be used for their protection against
clogging, or for an appropriate assembly.
Please see our accessories Catalogue CTG AC20.
Assembly fittings
ZRP
Dimensions
mm
1.0
Common applications
VEM
WS
H
ZPM
53
54
www.pnr-nozzles.com
HOLLOW CONE NOZZLES
RX/RZ
1/4
HYDRAULIC ATOMIZERS
WS 14
24
RX
1/4
Hydraulic atomizers are designed to deliver a very finely atomized
hollow cone spray, even at low pressure values.
The nozzle contains a precisely machined insert with tiny passages,
which can be disassembled for cleaning should the nozzle be clogged.
Protection against clogging can be achieved either through a strainer
on the main manifold, or by means of an optional individual filter VEF
(see accessories catalogue CTG AC20).
We offer two types of bodies, RX with tapered thread and spray angle
80, and RZ with straight thread and different spray angle values.
Materials
19.5
B1
B3
T1
AISI 303 Stainless steel
AISI 316 Stainless steel
Brass
(RX)
(RZ)
(RX)
54.5
WS 17
RZ
Code
Capacities shown in
the above table are
given in liters per hour.
80 RXT
RXT
RXT
RXT
RXT
RXT
RXT
RXT
RXT
RXT
RXT
RXT
RXT
0060
0100
0130
0190
0250
0380
0510
0650
0780
0910
1116
1143
1166
D
mm
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
Code
Capacities shown in
the above table are
given in liters per
minute.
60 RZQ
RZQ
RZQ
RZQ
RZQ
RZQ
RZQ
RZQ
RZQ
RZQ
0080
0120
0250
0390
0560
0780
1100
1140
1170
1200
xx
xx
xx
xx
xx
xx
xx
xx
xx
xx
Capacity
at different pressure values
(lph)
(bar)
1.5
2.0
3.0
4.0
5.0
6.0
10
15
20
50
0.50
0.50
0.70
0.70
1.00
1.00
1.50
1.60
1.90
1.90
1.90
1.90
2.20
5.52
8.06
10.6
16.1
21.6
27.6
33.1
38.6
49.2
60.7
70.4
2.94
4.90
6.37
9.31
12.2
18.6
25.0
31.8
38.2
44.6
56.8
70.1
81.3
3.60
6.00
7.80
11.4
15.0
22.8
30.6
39.0
46.8
54.6
69.6
85.8
99.6
4.16
6.93
9.01
13.2
17.3
26.3
35.3
45.0
54.0
63.0
80.4
99.1
115
4.65
7.75
10.1
14.7
19.4
29.4
39.5
50.3
60.4
70.5
89.9
111
129
5.09
8.49
11.0
16.1
21.2
32.2
43.3
55.2
66.2
77.2
98.4
121
141
6.57
11.0
14.2
20.8
27.4
41.6
55.9
71.2
85.4
99.7
127
157
182
8.05
13.4
17.4
25.5
33.5
51.0
68.4
87.2
105
122
156
192
223
9.30
15.5
20.1
29.4
38.7
58.9
79.0
101
121
141
180
222
257
14.7
24.5
31.8
46.5
61.2
93.1
125
159
191
223
284
350
407
D
mm
Capacity
at different pressure values
0.45
0.55
0.80
1.00
1.20
1.40
1.60
1.90
2.10
2.30
(lpm)
(bar)
1.5
2.0
3.0
4.0
5.0
6.0
10
15
20
50
0.18
0.28
0.40
0.55
0.71
0.99
1.20
1.41
0.07
0.10
0.20
0.32
0.46
0.64
0.82
1.14
1.39
1.63
0.08
0.12
0.25
0.39
0.56
0.78
1.00
1.40
1.70
2.00
0.09
0.14
0.29
0.45
0.65
0.90
1.15
1.62
1.96
2.31
0.10
0.15
0.32
0.50
0.72
1.01
1.29
1.81
2.19
2.58
0.11
0.17
0.35
0.55
0.79
1.10
1.41
1.98
2.40
2.83
0.15
0.22
0.46
0.71
1.02
1.42
1.83
2.56
3.10
3.65
0.18
0.27
0.56
0.87
1.25
1.74
2.24
3.13
3.80
4.47
0.21
0.31
0.65
1.01
1.45
2.01
2.58
3.61
4.39
5.16
0.33
0.49
1.02
1.59
2.29
3.18
4.08
5.72
6.94
8.16
Additional spray angles
RZ nozzles with orifice equal or larger than 1,0 mm can be produced
with angles of 30, 45, 60 or 90. The table beside shows the nozzle
identifying codes for these spray angles.
Spray angle codes
VEF
RZF
30
RZM
45
RZQ
60
RZU
90
www.pnr-nozzles.com
PNR PRODUCT RANGE
PNR manufactures, in addition to the range of general purpose nozzles shown in this Catalogue, a wide range of other
products and systems allowing you to optimize the use of liquid spray and fluid control in most modern industrial processes.
You will find our high quality, proven products shown in the following catalogs:
CTG AC20
Accessories Catalogue
A complete line of nipples,
clamps, swivel joints and
everything that helps you to easily
assemble, align and service your
spraying systems.
Air blowers, mixing eductors,
filters, cleaning guns and lances,
hose reels, steam heaters,
pressure tanks, quick couplings
to help build a professional
system.
CTG SP10
Spraydry nozzles
High pressure or air assisted
precision nozzles manufactured
with top quality stainless steel
housings and tungsten carbide
internals. A complete line of nozzles
to retrofit existing plants at
competitive prices. Only the highest
quality materials and the most
precise machining are employed in
the manufacture of our nozzles, to
assure precisely defined results and
consistent wear life.
CTG LS20
Tank washing systems
Everything from the simple fixed
sprayballs and pintle nozzles to
the twin-axis washer heads.
Reaction driven, water driven
and electric or pneumatic motor
driven. Professional inside
surface cleaning of industrial
tanks with the latest technology,
together with state of the art
accessories.
CTG PM10
Papermill products
A sixteen page Catalogue
showing products specially
developed for perfect results
on paper making machines,
including our patented disc
nozzle for self-cleaning pipes,
needle nozzles with sapphire
and ruby orifice, oscillating
pipes with high quality
computer driven motor.
CTG AZ18
Air assisted atomizers
Ultrasonic, classic and automatic
atomizers for the finest
atomization in any process.
High quality machining and tight
quality
control
assure
a
professional result to your
system. Control cabinets and
spray programmers allow for
complete humidification systems
to be easily assembled.
CTG SW20
Steelwork nozzles
A complete line of nozzles
for steelwork applications,
including continuous casting
air atomizers and conventional
nozzles, descaling nozzles for
high pressure systems, fixed
position dovetail tips and
coke quenching high capacity
flanged nozzles.
CTG LN16
Gas cooling lances
Spillback or air assisted lances
for gas cooling processes in
steelworks, cement plants and
other industrial applications.
We can supply spare parts,
retrofit your system or even
supply a complete system, PLC
driven, to upgrade tower
performance to the latest
technical standards.
CTG FF10
Fire fighting products
Everything for fixed and mobile
foam systems, bladder tanks,
a n y k i n d o f f o a m m i x e r,
monitors, foam lances and foam
nozzles, mobile trailers for
foam systems, pressure water
nozzles and watermist nozzles,
hydrants.
55
56
www.pnr-nozzles.com
NOTE
www.pnr-nozzles.com
GENERAL INFORMATION
ABBREVIATIONS
CL
Jet deflection angle
deg
DU
Liquid outlet dia
mm
RF
Female BSP straight thread
inch
Conventional orifice dia
mm
FF
Flange outer dia
mm
RG
BSPT male taper thread
inch
D1
Smallest free inside dia
mm
Flange center-hole dia
mm
SQ
Square bar size
DE
Liquid inlet dia
mm
H, H1 Height
mm
Weight
DF
Flange size
inch
L, L1 Length
mm
WS
Wrench size
DIA
Outside diameter
mm
NR
Number of orifices
DN
Flange nominal size
mm
QC
Quickfit connection
mm
gram, kg
mm
PRODUCT WARRANTY
PNR products will be replaced or repaired at the option of PNR and free of charges if found defective in manufacturing,
labelling or packaging. The above warranty conditions will apply if notice of defect is received by PNR within 30 days from
date of product installations or one year from date of shipment. The cost of above said replacement or repair shall be the
exclusive remedy for any breach of any warranty, and PNR shall not be held liable for any damage due to personal injuries or
commercial losses coming from product malfunction.
Our Company Procedure for warranty cases requires the following steps to be performed:
1 Contact our Quality manager and obtain from PNR a return authorization number
2 Return the products together with our Form 3DA A04 duly completed
3 PNR shall issue a test report, send you a copy and return the product repaired or replaced.
Our Company scope is to offer full Customer satisfaction, and we are fully aware of the inconvenience which can be originated
from a defective product. Please be assured we shall do our best to make available a perfect product in the shortest possible
time.
PRODUCT RETURN POLICY
PRODUCTS DELIVERED IN ERROR FROM PNR
1 Obtain from PNR a return authorization number together with a Form 3DA A04
2 Return the products together with our Form 3DA A04 duly completed
3 PNR shall issue a Credit Note for full Product and shipping costs.
PRODUCTS ORDERED INCORRECTLY TO PNR
1 Obtain from PNR a return authorization number together with a Form 3DA A04
2 Return the products at your expense together with the form 3DA A04 duly completed
3 Products shall be returned in original condition, inside the original packaging
4 A re-stocking change of 10% applies.
NON CATALOG PRODUCTS
These products can only be returned after a written authorisation from PNR has been obtained.
DISCLAIMER
Our products are manufactured with the best care and according to the latest developments of the technology, but we cannot
assure that every one of our products is perfectly fit for any possible specific process. The information in this Catalogue is
provided "as is" and we make no warranty of any kind with respect to the subject matter or accuracy of the information
contained herein. This publication may include technical inaccuracies or typographical errors and changes may be periodically
made to the information herein without prior notice.
SENDING LIST
In order to automatically receive updates of our technical Documentation please photocopy this card and send it to us inside a
sealed envelope, your details shall be kept on our Permanent Mailing List.
CTG UG20
01
COMPANY
PRODUCT RANGE
FIRE FIGHTING PRODUCTS
02
NAME
GENERAL PURPOSE SPRAY NOZZLES
PAPERMILL PRODUCTS
03
FUNCTION
AIR ASSISTED ATOMIZERS
STEELWORK NOZZLES
04
ADRESS
COMPLEMENTARY PRODUCTS
AND ASSEMBLY FITTINGS
SPRAYDRY NOZZLES
05
PHONE
FAX
INDUSTRIAL TANK WASHING SYSTEMS
06
WEB SITE
EVAPORATIVE COOLING SYSTEMS
57
CTG UG20 BR
www.pnr-nozzles.com
Our products are distributed through:
PNR America
PNR Asia
PNR Baltic
PNR Benelux
PNR Czech Republic
PNR Deutschland
PNR France
PNR Italia
PNR Mexico
PNR U. Kingdom
We are moreover represented in:
Argentina
Australia
Austria
Brazil
Bulgaria
Canada
Chile
China
Croatia
Denmark
Finland
Greece
India
Indonesia
Iran
Ireland
Korea
Malaysia
Norway
New Zealand
Pakistan
Philippines
Poland
Portugal
Rumenia
Russia
Serbia
Singapore
Slovenja
Spain
South Africa
Sweden
Taiwan
Turkey
Venezuela
You might also like
- Liquid Spray and Spray Nozzles: CTG SH 07 EuNo ratings yetLiquid Spray and Spray Nozzles: CTG SH 07 Eu25 pages
- Cone-Straight Nozzle Flow Dynamics StudyNo ratings yetCone-Straight Nozzle Flow Dynamics Study14 pages
- Wilo-Vertical Turbine: SEA Edition - 2018 - 50 HZNo ratings yetWilo-Vertical Turbine: SEA Edition - 2018 - 50 HZ4 pages
- Functioning and Maintenance Manual: Progressing Cavity Pumps100% (1)Functioning and Maintenance Manual: Progressing Cavity Pumps42 pages
- Xii 1 - Brochure Sihi LPHX 45008 45311 45316No ratings yetXii 1 - Brochure Sihi LPHX 45008 45311 4531616 pages
- Friction Loss in Valves & Fittings As Per IPC-2018No ratings yetFriction Loss in Valves & Fittings As Per IPC-20181 page
- Working Principle of Control Valve With DiagramNo ratings yetWorking Principle of Control Valve With Diagram10 pages
- Atomization and Sprays 2nd Edition Lefebvre Updated 2025No ratings yetAtomization and Sprays 2nd Edition Lefebvre Updated 202576 pages
- Cairo University Faculty of Engineering Industrial Training - 1 MDE DepartmentNo ratings yetCairo University Faculty of Engineering Industrial Training - 1 MDE Department25 pages
- Pentair Mecair Threaded Pulse Jet ValvesNo ratings yetPentair Mecair Threaded Pulse Jet Valves5 pages
- Chapter 2: Turbulent Flow in Pipes Characteristics of Turbulent Flow in PipesNo ratings yetChapter 2: Turbulent Flow in Pipes Characteristics of Turbulent Flow in Pipes27 pages
- Fluid N5 - Merged - Compressed (2) - 250627 - 193232No ratings yetFluid N5 - Merged - Compressed (2) - 250627 - 19323251 pages
- Pump Station Design: Jim W. Horner Martin R. DebusmanNo ratings yetPump Station Design: Jim W. Horner Martin R. Debusman12 pages
- Pentair Goyen Manifold Mount Pulse Jet Valves100% (1)Pentair Goyen Manifold Mount Pulse Jet Valves11 pages
- Specification For Sealless Horizontal End Suction Centrifugal Pumps For Chemical ProcessNo ratings yetSpecification For Sealless Horizontal End Suction Centrifugal Pumps For Chemical Process10 pages
- Fluid Power Notes 8 Hydraulic ConductorsNo ratings yetFluid Power Notes 8 Hydraulic Conductors4 pages
- Microbial Metabolism: Biochemical DiversityNo ratings yetMicrobial Metabolism: Biochemical Diversity60 pages
- Beckers World of The Cell Chapter-01 Test Bank Questions and AnswersNo ratings yetBeckers World of The Cell Chapter-01 Test Bank Questions and Answers18 pages
- An Integrated Approach To Aquaculture Waste Management in Flowing Water SystemsNo ratings yetAn Integrated Approach To Aquaculture Waste Management in Flowing Water Systems420 pages
- SDS Lubricant Safety Data Sheet For Type E, F, W, 3F, and 5R Gearmotors - LG 38No ratings yetSDS Lubricant Safety Data Sheet For Type E, F, W, 3F, and 5R Gearmotors - LG 388 pages
- Lecture Planner - Chemistry - Board Booster 12th English 2024No ratings yetLecture Planner - Chemistry - Board Booster 12th English 20241 page
- Viscosity and Density Measurement Methods For Polymer Melts: R. Kažys, R. RekuvienėNo ratings yetViscosity and Density Measurement Methods For Polymer Melts: R. Kažys, R. Rekuvienė6 pages
- Experiment 7 Inorganic Compounds and Metathesis ReactionsNo ratings yetExperiment 7 Inorganic Compounds and Metathesis Reactions25 pages