WWW.ENDAQ.

COM

S4-E2000D40

S4 Shock Sensor
$3,299.00 3299.00
In stock
Aluminum 7075
Piezoelectric Accelerometer: ± 2,000g
Digital Capacitive Accelerometer: ± 40g
Battery: 250 mAh
Storage: 8 GB

S4-E2000D40
Unavailable Why enDAQ?
Demo with an Engineer
Unfortunately, due to supply issues, we will be temporarily discontinuing the Visit our Help Center
S4-E2000D40. We plan to bring back this sensor in 2024 - once we are able Customer Testimonials
to get its parts back in stock. We appreciate your patience and Contact Customer
Success
understanding as we work through these supplier challenges.

Replacement Option
The following sensor may be a good alternative for your application:

S4-R2000D40

If you have any questions, concerns, or would like to place an order, please feel free to reach out to our
Customer Success Team

Mon, 26 Jun 2023 07:29:53 -0700 1

 WWW.ENDAQ.COM

PLEASE NOTE: LONGER LEAD TIMES

Due to the global chip shortage, some of our products require a longer lead time than the usual 2
business days + shipping. We sincerely apologize for the inconvenience and are working tirelessly to
transition to a more readily available microprocessor. In the meantime, if you have any questions,
please do not hesitate to reach out to our Customer Success Team.

Click for AVAILABLE PRODUCTS

Complimentary enDAQ Pelican case included with every enDAQ® sensor order.
Additional cases can be purchased here: enDAQ Accessories

Product Features

Standalone measurement system with sensors, storage & rechargeable

battery
Convenient
Handheld form factor
Setup in minutes over USB interface

Multiple accelerometers for dynamic range

Adaptable Many additional embedded sensors into single system
User-programmable wake-up conditions and sample rates

Trusted in harsh environments by over 2,000 customers & the US Navy

Calibrated with NIST Traceable Accelerometer | Benefits | Calibration
Reliable
Certificate
Storage capacity for billions of data points

Accelerometer Specifications>> More Information

Accelerometer Type Range Sampling Rate Bandwidth Noise Resolution
5 to 2,000
Piezoelectric ± 2,000g 20,000 Hz < 1.0 gRMS 0.06 g
Hz
Digital Capacitive ± 40g 4,000 Hz 0 to 300 Hz < 0.01 gRMS 0.00008 g
Please note: Piezoelectric accelerometers are susceptible to saturation due to exposure to high frequency events
because they are AC coupled. If your application will have high frequency events (events with pulse widths less than
1 ms) we recommend checking out our S-R series products.
Find out more in our Piezoelectric Accelerometers Blog Post

Frequency Response Plot

Additional Sensor Specifications >> More Information

Sensor Measurement Range Resolution Sampling Rate
0 (off) to 200
Gyroscope 2000°/s 0.06 °/s
Hz
Magnetometer ± 1300 µT 0.3 µT 0 (off) to 10 Hz
Temperature -40 to 85 °C 0.01 °C 0 (off) to 10 Hz
Pressure 1 to 200 kPa 1.6 Pa 0 (off) to 10 Hz
Humidity 0 to 100 %RH 0.04% RH 0 (off) to 10 Hz
Light 0 to > 20 uV <100 mlx 0 (off) to 4 Hz
Environmental Specifications >> More Information
Parameter Range Notes
Operating Temperature -10°C to 80°C (14°F to 176°F)
Recommended Storage 15°C to 30°C (59°F to 86°F) Recharging Temperature 0°C to 45°C (32°F
Temperature to 113°F)
Humidity 0 to 95 %RH Non-Condensing

Mon, 26 Jun 2023 07:29:53 -0700 2

 WWW.ENDAQ.COM

20 kPa to 110 kPa (2.9 psi to

Pressure Absolute Pressure
16.0 psi)
Shock Limit >3,000 g Refer to Shock Report (PDF)
No Electric Field Susceptibility 2 MHz to 18 GHz @ 200 V/m Refer to EMI Test Report (PDF)
No Magnetic Field
30 Hz to 100 kHz Refer to EMI Test Report (PDF)
Susceptibility
Battery & Storage Performance >> Battery Specifications >> Battery Life Estimator
Battery performance is heavily dependent upon the device configuration (sensor sample rates and triggers),
battery age (including charging cycles), and temperature. The following table provides the battery life and
storage capacity of this device assuming it has a relatively new battery and it is at room temperature. When
showing performance it assumes all sensors are on at the default sample rate with the main accelerometer
sample rate driving performance. With triggers, it assumes the device is in trigger mode 99% of the time.
Here are some additional resources: Measurement Settings, Battery Specifications, Battery Life Estimator
Tool.
Sample Storage Continuous Main Accel. 2nd Accel. Periodic/Time
Rate Capacity Recording Trigger Trigger Trigger
100 Hz 22 days 13 hours 13 hours 52 hours 52 days
1,000 Hz 9 days 12 hours 13 hours 52 hours 49 days
5,000 Hz 63 hours 9 hours 13 hours 52 hours 38 days
20,000 Hz 17 hours 5 hours 13 hours 49 hours 20 days
Dimensions>> Download CAD Model

Mechanical Specifications >> Mounting

Mass 65 grams
Case Material Aluminum 7075
Mounting - Screw 4-40 Bolts (100 in-oz)
Mounting - Tape (Double Sided) 3M 950 Tape
Length 76.2 mm (3.00")
Width 29.8 mm (1.18")
Thickness 18.3 mm (0.72")
Ingress Protection IP 50 (Dust Protected)
Free Software Features>> More Information

Free Standalone Software Packages

Lab - Configuration, Quick Snapshot, Batch File Conversion
Analyzer - Analysis of enDAQ Sensor Data in MATLAB
Configure Sensors for Measurement
Export/Convert Data to CSV or MATLAB
Analysis
FFT
PSD
Spectogram
Digital Filtering

Mon, 26 Jun 2023 07:29:53 -0700 3