Quick Print

-------------------------------------------------------------------------------------------
Item : Unknown Doc No. : Unknown
Client : Page : 1
-------------------------------------------------------------------------------------------
Title : 14

Design data
===========
Units - N mm degrees C
Type - 2:1 Ellipsoidal head
Pressure - Design pressure
Design pressure MPa 0.100
Design temp deg.C 20.000
Corrosion: int mm 0.000
Corrosion: ext mm 0.000

Head data
=========
Diameter: OD-ID-NB - Internal
Inside diameter mm 200.000
New thickness mm 5.000
Tolerance - Absolute
Thinning mm 0.000
Straight flange - Yes
Straight flange length mm 32.000

Material data
=============
Material spec - A516-60
Head weld - Type 1
Radiography: TABLE UW-12 - Spot
Head to shell weld - Type 1
Radiography: TABLE UW-12 - Spot
 Quick Print
-------------------------------------------------------------------------------------------
Item : Unknown Doc No. : Unknown
Client :
-------------------------------------------------------------------------------------------
Title : 14

Output data
===========
Inside head height mm 50.000
Joint efficiency E - 0.850
Diameter D mm 200.000
Head height h mm 50.000
Ratio D/2h - 2.000
Factor K - 1.000
Factor K1 - 0.900
Radius L mm 180.000
Ratio t/L - 0.028
Allowable stress: DT MPa 118.000
Min reqd thk t mm 0.085
Thickness mm 5.000
Test pressure (1.3P.Sa/S) MPa 0.130
MAWP new & cold MPa 5.728
MAWP hot & corroded MPa 5.728
Material SG - 7.850
Head weight kg 2.558
Head volume m3 0.002

Material data
=============
Material spec - A516-60
Min tensile strength MPa 415.0
Yield: ATM MPa 220.0
Allowable stress: ATM MPa 118.0
Elastic mod: ATM MPa 202350.0
Yield: DT MPa 221.0
Allowable stress: DT MPa 118.0
Elastic mod: DT MPa 202350.0
Source: ASME II Part D Table 1A p10/43(M)
Source: ASME II Part D Table Y-1 p612/28(M)
Source: ASME II Part D Table TM-1 CS C <= 0.3%(M)
Product form: Plate
Matl No: K02100
Group: 1.100

Warnings data
=============
Straight flange
Acceptable calculation

Warnings