2001-2003
KIA
RIOS
Year: 2001-2003 Make: Kia Model: Rios
IN-DASH APPLICATION:
Dash Type: Double DIN
Kit: KA2065
Harness: KA01
FRONT SPEAKERS:
Front Door: 7” 4-hole speaker mounted to factory metal with 2 3/8" depth
REAR SPEAKERS:
Rear Deck Speakers 7” 4-hole speaker mounted to factory metal
WIRE COLOR CODES:
+12V Constant = Pink
+12V Accessory Switched = Dark Green
-12V Chassis Ground = Black
+12V Illumination = Blue
LF+ = White/Black
LF- = White/Green
RF+ = Yellow/Red
RF- = Yellow/White
LR+ = Brown/Green
LR- = Brown/Black
RR+ = Orange/Black
RR- = Green/Yellow
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTE © 2000 SCOSCHE INDUSTRIES, INC.
ALL RIGHTS RESERVED
ACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE FOR MORE INFORMATION VISIT www.scosche.com
GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR.. 155 OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
2001-2003 Kia Rio
PRELIMINARY: Disconnect the negative battery cable.
ANTENNA: Located on the driver side “A” Pillar.
RADIO REMOVAL AND IN-DASH INSTALLATION:
Note: The factory stereo provision is for a DIN size radio.
1. Remove Ashtray and extract (1) Philips head screw from
ashtray cavity.
FRONT DOOR SPEAKER REMOVAL AND INSTALLATION:
Note: The factory speaker provision is for a 7" 3-Hole
speaker mounted in a factory speaker adapter.
1. Extract (1) Philips head screw from interior door handle.
2. Extract (1) Philips head screw from door cup.
3. Using windows crank remover, remove window crank.
4. Extract (3) Philips head screw from speaker, Unplug and
remove.
5. Pry door loose and remove.
6. Extract (3) Philips head screws from speaker, unplug and
remove.
REAR DECK SPEAKER REMOVAL AND INSTALLATION:
Note: The factory speaker provision is for a 7" 3-Hole
speaker.
1. Extract (2) 12mm bolts from bottom seat cushion, then
remove.
2. Extract (3) 12mm bolts from top seat cushion, pull up and
remove.
3. Use panel removal tool and remove (4) plastic fasteners from
rear deck.
4. Remove (3) plastic safety covers, extract (3) 12mm bolts
from tie downs on rear deck.
5. Use panel removal tool and remove 3rd brake light, Unplug
and remove.
6. Lift up and out on rear deck carefully.
7. Extract (4) Philips head from speaker, Unplug and remove.
NOTE: THIS MANUAL IS BASED ON CAREFULLY DOCUMENTED RESEARCH. ABSOLUTE
ACCURACY IS ATTEMPTED BUT NOT GUARANTEED. USE THIS MANUAL AS A REFERENCE
GUIDE. SCOSCHE, INC. CANNOT BE RESPONSIBLE FOR INCONSISTENCIES THAT MAY OCCUR.. © 2000 SCOSCHE INDUSTRIES, INC.
ALL RIGHTS RESERVED
FOR MORE INFORMATION VISIT www.scosche.com
156 OR CALL SCOSCHE INDUSTRIES, INC. AT 800-363-4490
