International Journal of Trend in Research and Development, Volume 5(2), ISSN: 2394-9333

www.ijtrd.com

IoT Based Industrial Automation

1
S.Prakash, 2R.V.Amrisha, 3C.M.Dhamodaran, 4K.Hariharan and 5R.Karunya,
1
Assistant Professor, 2,3,4,5UG student,
1,2,3,4,5
ECE Department, Jansons Institute of Technology, Coimbatore, Tamilnadu, India

Abstract: Internet of Things (IoT) is rapidly increasing Industrial automation using CAN protocol describe project is
technology. IoT is the network of physical objects or things implemented to control the industrial loads that are run by DC
embedded with electronics, software, sensors, and network motor based on the temperature variations of the process.
connectivity, which enables these objects to collect and Various process control systems are depends on the
exchange data. In this paper, we are developing a system temperature.
which will automatically monitor the industrial applications
A Review On Industrial Automation Using IOT. They have
and generate Alerts/Alarms or take intelligent decisions using
developed new technologies that have allowed us to move
concept of IoT. IoT has given us a promising way to build
from the First generation of the Internet into the current
powerful industrial systems and applications by using wireless
transition into the Fourth generation. This generation has been
devices, Android, and sensors. A main contribution of this
propelled by the concept of the Internet of Things.
review paper is that it summarizes uses of IoT in industries
with Artificial Intelligence to monitor and control the Industry. IOT Based Automated Temperature And Humidity Monitoring
And Control In this paper, a raspberry pi running with Linux
Keywords: Arduino, WiFimodule, GSM, Temperature sensor,
OS coded with C++ program that retrieves the temperature as
IR sensor
well as humidity readings and these values are sensed and sent
I. INTRODUCTION to the internet.
In recent years a wide range of industrial IoT applications have Industrial Temperature Monitoring And Control System
been developed and deployed. Evolution of this starts from Through Ethernet Lan This paper presents a PC based
RFID technology, which allows microchips to transmit the temperature monitoring and control system using virtual
identification information to a reader through wireless instrumentation, Lab VIEW. Data acquisition is an important
communication. By using RFID readers, people can identify, role in industry in order to ensure the quality of service.
track, and monitor any objects attached with RFID tags Temperature sensor measures the temperature and produce
automatically. Another technology is the wireless sensor corresponding analog signal which is further processed by the
networks (WSNs), which mainly use interconnected intelligent microcontroller. The simulator acquires data from the
sensors to sense and monitoring. Its applications include microcontroller through Ethernet port. The data will be
environmental monitoring, industrial monitoring, traffic displayed on the LCD in microcontroller and PC monitor.
monitoring. Both RFID and WSN are used to develop IoT. Automation and control can be done with the help of control
Then upcoming technology is IoT with Artificial Intelligent. circuitry.
In previous year, Industry was monitored manually, but this
III. PROPOSED WORK
paper introduces Artificial Intelligent to monitor as well as
control the Industry autonomously without human The industry alerts are based on manual intervention. To
intervention. overcome this a new technology has been developed to control
the machines automatically. Evolution of this starts from RFID
II. LITERATURE REVIEW
technology, to transmit the identification to a reader through
Industrial automation using ZigBee describe the transmitter wireless communication.By using this people can identify,
section, the Zigbee module is configured in such a way that it track and monitor any objects attached with RFID tags
receives the data collected from the microcontroller and sends automatically.In our project we use various sensors for the
it to the remote receiver. In this system, the microcontroller is safety purpose. By using these sensors it automatically stops
programmed to collect the data from an analog to digital the machine.Here we use temperature sensor, float sensor, IR
converter that continuously monitors temperature, voltage and sensor. There are also switches which will automatically OFF
current parameters. At the receiver side, the Zigbee module the machine if there is any occurance of over voltage, short
receives all the sent data from a Zigbee transmitter within the circuit, under frequency.
range of communication. This data is further transferred to the
GOALS AND OBJECTIVES
microcontroller using an embedded circuitry wherein the
microcontroller program compares all these data parameters To develop a system which will automatically monitor the
with predefined set limits. If any parameter exceeds its limit, industrial applications and generate Alerts/Alarms or take
then the microcontroller sends command signals to a relay intelligent Decision using concept of IoT. And also design the
driver IC, which is responsible to operate different loads such system to Take Intelligent Decision and Control Devices.
as motors, relays, circuit breakers, etc. All these parameters’
information is also displayed on LCD display as a Human IV. EXISTING SYSTEM
machine interface. In this way, industrial parameters can be No ways to detect un-even condition in industry. Manual
easily monitored and controlled through the short range low intervention required for monitoring. CCTV used which only
cost and low powered Zigbee communication technology. It monitor but no Alert generation. Alert and their appropriate
supports two ways communication between transmitting actions not present manually. Time consuming approach to
devices and controllers at 10-100 meters distance. detect and generate Alert Manually.

IJTRD | Mar - Apr 2018

Available Online@www.ijtrd.com 194
 International Journal of Trend in Research and Development, Volume 5(2), ISSN: 2394-9333
www.ijtrd.com
V. BLOCK DIAGRAM

Figure 1: Industrial Automation

VI. OVERVIEW OF SYSTEM CONCLUSION
In this modern era of automation and advanced computing Nowadays we need everything computerized. Earlier we can
using IoT offer promising solutions towards the automation of only monitor the situations with the help of cameras. In
Industry. In order to understand the development of IoT in industries to reduce manual overhead we have implemented
industries, this paper reviews the current research of IoT, key Internet of Things (IoT) in Industry to monitor as well as to
enabling technologies, major IoT applications in industries, inform the responsible person to take appropriate measures,
and identifies research trends and challenges. The Internet of but this will partially fulfill our requirement. As sometimes it
Things allows objects to be sensed and controlled remotely will be late in this process and it will harm to property as well
across existing network infrastructure. Sensors (Temperature as life. For this purpose we are developing a system for
sensor, Float sensor, IR sensor) are used here. Analog signal Industrial Automation using IoT to make system automated
are provided to android device produced by sensors. Admin set which will take decision.
threshold to every sensors placed in Industry. Android check
References
this threshold against incoming analog signal. When it
encounter an uneven condition devices (Buzzer, Alarm) are [1] “Intelligent Security System for Residential and Industrial
use to take accurate measures such as Alarm/Alert are Automation”, Mallesham Yerragolla, Kamalakar Pallela,
generated, it send messages and email to Admin Indira Priya dharshinigera.(2016).
[2] “A General Real-Time Control Approach of Intrusion
Applications
Response for Industrial Automation Systems”, Shuang
Industry and office:-We can implement sensors in wide area Huang, Chunjie Zhou, NaixueXiong.(2015).
over the machines and instruments. Control and Monitor [3] ”Industrial Automation using IOT with Raspberry Pi”, H.
circumstances by using concept of IoT. Hospital and Labs: - K. Merchant, D. D. Ahire (2017).
We can plot sensors on patient’s body and Doctor can check [4] ”Industrial Automation using 8051 Microcintroller”
current status on his android phone and also take necessary Aishverya Kumar Sharma, Kushaga Kumar Choubey,
actions and decisions. Home:-We can implement sensors to Mousam Sharma(2015).
household appliances and monitor and control with the help of [5] ”Internet of Things for Industrial Automation- Challenges
IoT. and Technical Solutions”, Hongyu Pei Breivold, Kristian
Sandstrom(2015)IEEE Conference.
[6] ”PLC Based System Using Microcontroller for Industrial
Application Based on Android Technology”, Mrs.

IJTRD | Mar - Apr 2018

Available Online@www.ijtrd.com 195
 International Journal of Trend in Research and Development, Volume 5(2), ISSN: 2394-9333
www.ijtrd.com
Nitapatil, Ajay. K. Selvaraj, Sadindra, Karkera, Prince
Abraham, NikhilHosur. April (2015).
[7] “Industrial Automation using Internet of Things (IOT)”,
Ashwini Deshpande, Prajakta Pitale, Sangaita
Sanap.(2016).
AUTHORS
1.Mr.S.PrakashAssistant professor ECE department. He did his
diploma in CSE in RuthreaveniMuthusami Polytechnic
College., Palappampatti. Did his UG in IT in Mahalingam
College of Engineering Pollachi.Completed ME in VLSI
Design in Kongu Engineering College Perundurai.
2.Ms.R.VAmrishais currently pursuing her B.E Bachelor
Degree in ECE from Jansons Institute of Technology under
Anna University, Chennai.
3.Mr.C.M.Dhamodaran is currently pursuing his B.E Bachelor
Degree in ECE from Jansons Institute of Technology under
Anna University, Chennai.
4.Mr.K.Hariharanis currently pursuing his B.E Bachelor
Degree in ECE from Jansons Institute of Technology under
Anna University, Chennai.
5.Ms.R.Karunyais currently pursuing her B.E Bachelor Degree
in ECE from Jansons Institute of Technology under Anna
University, Chennai.

IJTRD | Mar - Apr 2018

Available Online@www.ijtrd.com 196