Rectiverter Indoor system
Scalable system 18-54 kVA
with optional A & B, AC input
The scalable Rectiverter indoor system provides AC backup power for
400 VAC 3-phase or 230 VAC 1-phase loads, and 48 VDC power for battery
charging and optional DC loads. The flexible DC output can be set to
recharge large battery backup with protection time up to 10 hours.
In combination with the optional B-input (dual AC input) eliminates the
need for a traditional ATS (Automatic Transfer Switch).
Where the switch from A to B input, is a seamless operation with no
interruption on the AC load.
When configured with dual AC input for use as an AC UPS, it classifies as
- VFI SS 111 according to EN 62040-3
Rectiverter Indoor system
Scalable system 18-54 kVA, with optional A & B, AC input
Doc CTEJ3643.48.DS3 – rev3
MODULAR ARCHITECTURE APPLICATIONS KEY FEATURES
RECTIVERTER MODULE 400 VAC 3 PHASE (Y) INPUT
The 3 port converter simultaneously TELECOM-MOBILE/WIRELESS 400 VAC 3 PHASE (Y) OUTPUT
provides power for AC and DC loads.
During mains outage the Rectiverter LTE/4G/WiMAX 48 VDC INPUT/OUTPUT
48/1200 HE feeds AC loads using energy Distributed antenna system MAX 54 KVA / 43,2 KW AC OUTPUT
stored in the battery. Broadband MAX 43,2 KW DC OUTPUT
Radio base stations/cell sites PROTECTED BULK AC OUTPUT
The modular architecture, industry-leading A+B OPTION (DUAL AC INPUT)
efficiency, compact size, innovative design RAILWAY & METRO INFRASTRUCTURE
and comprehensive monitoring and control MANUAL BYPASS OPTION
features provide significant benefits over Control & protection UP TO 4 BATTERY STRINGS
the current industry standard. Signaling BUILT IN TRANSFER TECHNOLOGY
GSM-R 150% OVERLOAD CAPABILITY, 15S
Safety Systems
600% QUICK TRIP CURRENT, 20MS
HOT PLUGGABLE
POWER UTILITIES
SMARTPACK 2 CONTROLLER
Control & protection OPERATES IN PARALELL WITH
SCADA system FLATPACK2 RECTIFIERS
GLOBAL COMPLIANCE
PATENTED HE TECHNOLOGY
Rectiverter Module
Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2018 – www.eltek.com
Scalable System 18-54 kVA, A+B input
Doc CTEJ3643.48.DS3 – rev3
FRONT VIEW 54 KVA + 72 KW B-INPUT
MODEL 72 KW
Part number CIEJ3642.xxxx
INPUT DATA
Voltage range AC (3 phase Y) 320-475 V
Voltage range DC 40-58 V
Maximum current AC (per phase) 92-138 A
Frequency 50 Hz / 60 Hz
Power factor > 0.99
OUTPUT DATA
Adjustable range AC (3 phase Y) 346-415 V
Adjustable range DC 43-58 V
Max output power AC 54,0 kVA / 43,2 kW
Max output power DC 43,2 kW
Admissible load power factor 0 Ind. to 0 Cap.
Frequency 50 Hz / 60 Hz
Battery breaker (2-pole) 2*1600 A
OPTIONS
B-Input (dual AC input) 72 kW
Manual Bypass Switch Internal
LVBD (1-pole) 1800 A
Specifications are subject to change without notice
Rectiverter 54 kVA + 72 kW B-input (without front covers)
SINGLE LINE DIAGRAM 54 KVA+72 KW B-INPUT
Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2018 – www.eltek.com
Scalable System 18-54 kVA, A+B input
Doc CTEJ3643.48.DS3 – rev3
FRONT VIEW 54 KVA + 72 KW B-INPUT
MODEL 72 KW
Part number CIEJ3642.xxxx
INPUT DATA
Voltage range AC (3 phase Y) 320-475 V
Voltage range DC 40-58 V
Maximum current AC (per phase) 92-138 A
Frequency 50 Hz / 60 Hz
Power factor > 0.99
OUTPUT DATA
Adjustable range AC (3 phase Y) 346-415 V
Adjustable range DC 43-58 V
Max output power AC 54,0 kVA / 43,2 kW
Max output power DC 43,2 kW
Admissible load power factor 0 Ind. to 0 Cap.
Frequency 50 Hz / 60 Hz
Battery breaker (2-pole) 4*600 A or 2*1600 A
OTHER SPECIFICATIONS
Load Breaker (2 pole) 2*600 A
B-Input (dual AC Input) 72 kW
Manual Bypass Switch Internal
LVBD (1-pole) 1800 A
Rectiverter 54 kVA + 72 kW B-input (without front covers)
Specifications are subject to change without notice
SINGLE LINE DIAGRAM 54 KVA + 72 KW B-INPUT
Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2018 – www.eltek.com
Scalable System 18-54 kVA, A+B input
Doc CTEJ3643.48.DS3 – rev3
Models / ordering information 54 kVA + 72 kW B-Input
Product family CIEJ3642.xxxx
AC OUTPUT DATA
Voltage (default) / (adjustable range)1) 400 VAC 3 phase (Y) / 346-415 VAC
Frequency (default inverter mode) 50 Hz (adaptive)
Frequency (set-able inverter mode) 50Hz, 60Hz or last synced 50/60Hz (adaptive)
Power maximum (continuous / overload (<15s) ) 43,2 kW (54 kVA) / 72 kVA
Current maximum/phase (continuous / overload (<15s) ) 78ARMS / 104,4ARMS
Current (maximum) Quick trip/phase (20ms) 380A (6 x nominal)
Hold up (Voltage dips) (before switching to battery) > 5 ms @ 43,2 kW load
THD < 1.5 % at resistive load
Module: Fuse in L and N , Hot pluggable
Output features
100 A MCCB, AC output individual screw terminals 70 mm2 for L1-L3, N & PE
DC OUTPUT DATA
Voltage (default) / (adjustable range) 53.5 VDC / 43 - 58 VDC
Power (maximum @nominal input) 43,2 kW 2)
Current (maximum @VOUT ≤ 48 VDC) 900 A 2)
Hold up time, maximum output power >10ms; VOUT > 41 VDC
Short circuit proof, Over voltage Shutdown
Output features
Battery input /output connection to M10 bolt
INPUT DATA
AC Mains Input Voltage(3 phase Y) 320-475 VAC,
AC Current/phase(at nominal output voltage) (depending on module type) 92-138 ARMS 4)
Frequency (default: sync range) 47-53 & 57-63 Hz
Frequency (set-able: sync range) 47-53 Hz, 57-63 Hz or both (adaptive)
Power Factor / THD > 0.99 at 50% load or more / < 3.5%
3)
DC Voltage nominal / extended range (no overload) 45 - 58 VDC / 40 - 45 VDC
DC Current (maximum) 1152 A / 1620 A during overload (15s)
Module : Fuse in L and N, Hot pluggable, Varistor, Hot pluggable
Input features
160 A MCCB, AC input individual screw terminals 70 mm2 for L1-L3, N & PE
DC LOAD AND BATTERY BREAKER OPTIONS BATTERY BREAKER DC LOAD BREAKER
Possible configurations (2 pole breaker) 2*1600 A (4*TPS 2 holder 800-1600 A) -
Possible configurations (2 pole breaker) 4*600 A (8*TPS 00 holder 250-600 A) -
Possible configurations (2 pole breaker) 2*600 A (4*TPS 00 holder 250-600 A) 2*600 A (4*TPS 00 holder 250-600 A)
OPTIONS
B-Input maximum power (with FP2 HE, 3 kW rectifiers) 72 kW
Manual Bypass switch 2*160 A
LVBD (1-pole) 1800 A
OTHER SPECIFICATION
Efficiency >96% (mains mode (AC/AC and AC/DC)), >94% (inverter mode (DC/AC))
Protection Class IP 20
Operating temperature -40 to +55°C (-40 to +131°F), humidity 5 - 95% RH non-condensing
Storage temperature -40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing
Dimensions[WxDxH] / Weight 600 x 600x 2000mm (23,7 x 23,7 x 78,8”) / 300 kg (1100 lbs)
DESIGN STANDARDS
Electrical safety EN 60950-1, EN 62040-1 UPS safety
EMC ETSI EN 300 386 V.1.6.1, FCC CFR 47 Part 15
EN 61000-6-1 /-2/-3/-4, EN 62040-2
ETSI EN 300 019: 2-1 (Class 1.2), 2-2 (Class 2.3)
Environment Normal operating conditions to be as per IEC/EN 62040-3:2011 clause 4.1
RoHS (2011/65/EU) and WEEE (2002/96/EC) compliant
1) Output voltage ranges configured in factory and have individual keying in top chassis 2) AC load has priority. Maximum available DC output power and current is dependent on instant
3) 40 - 45 VDC: reduced performance - no power boost and increased voltage THD on AC output. AC load and AC input voltage; i.e maximum 28 ,8kW/600 A at full AC power and nominal input for
230VAC.
4) If DC voltage is pulled below 43V the input current may increase above this level
Specifications are subject to change without notice
Eltek — Gråterudveien 8, PB 2340 Strømsø, 3003 Drammen, Norway Phone: +47 32 20 32 00 Eltek © 2018 – www.eltek.com
