0 ratings0% found this document useful (0 votes)
30 views49 pagesScope TC 12450
Uploaded by
Anamika BajpaiCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
30 views49 pagesScope TC 12450
Uploaded by
Anamika BajpaiCopyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 49
QUALITY TESTING & RESEARCH LAB, PLOT NO.
28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 1 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Permanent Facility
CHEMICAL- TEXTILE
1 Textile & related product Color Fastness to perspiration IS /ISO 105 - E04
(WOVEN & NON WOVEN)
CHEMICAL- TEXTILE
2 Textile & related product Color fastness to rubbing IS /ISO 105 - X12
(WOVEN & NON WOVEN)
CHEMICAL- TEXTILE Water repellency test (Spray
3 Textile & related products (Textile yarn fabric & Garments) IS 390
(WOVEN & NON WOVEN) test) of fabric
CHEMICAL- TEXTILE
4 Textile & related products Color Fastness to washing IS/ISO 105 - C10
(WOVEN & NON WOVEN)
CHEMICAL- TEXTILE Dimensional change on
5 Textile & related products IS 2977
(WOVEN & NON WOVEN) soaking in water
MECHANICAL- LEATHER
6 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Abrasion resistance of insocks Cl 6.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Adhesion test for rubberized
7 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 IS 3400 (Part-5)
AND LEATHER PRODUCTS textile upper
MECHANICAL- LEATHER Antistatic footwear electrical
8 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 5.10 of EN ISO 20344
AND LEATHER PRODUCTS resistance test
MECHANICAL- LEATHER Breaking force of rubber boot
9 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 6.4.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS upper
MECHANICAL- LEATHER Coated binding material
10 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Annex-B of IS 5557 (Part-2)
AND LEATHER PRODUCTS breaking load
MECHANICAL- LEATHER
11 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Coated binding material width IS 1954
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
12 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Height of upper all sizes Cl 6.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
13 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Instep girth Table 8 Cl 3.1 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
14 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Joint girth Table 8 Cl 3.1 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
15 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Leek proof test Cl 5.7 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
16 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 length of foot Table 8 Cl 3.2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Table 8 Cl 3.1 of IS 5557
17 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Length of last
AND LEATHER PRODUCTS (Part-2)
MECHANICAL- LEATHER Lining of coated fabric & textile
18 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 ISO 4674 (Part-1)
AND LEATHER PRODUCTS tear strength
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 2 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Lining textile abrasion
MECHANICAL- LEATHER
19 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 resistance dry and wet Cl 6.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
condition
MECHANICAL- LEATHER Outsole forepart without cleat
20 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 7.6.1 of IS 5557 (Part-2)
AND LEATHER PRODUCTS thickness
MECHANICAL- LEATHER Outsole heel with cleat
21 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 7.6.1 of IS 5557 (Part-2)
AND LEATHER PRODUCTS thickness
MECHANICAL- LEATHER
22 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Resistance to Acid Cl 4.3.10 of IS 5915
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Resistance to hot contact out
23 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 8.7 of IS 15298 (Part-1)
AND LEATHER PRODUCTS sole heel & upper
MECHANICAL- LEATHER Rubber change in hardness
24 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 IS 3400 (Part-4)
AND LEATHER PRODUCTS after accelerating ageing
MECHANICAL- LEATHER Rubber Elastomeric/ polymeric
25 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 7.7.1 of IS 5557 (Part-2)
AND LEATHER PRODUCTS verity thickness
MECHANICAL- LEATHER
26 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Rubber hardness IS 3400 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Rubber Interlayer bond
27 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS strength
MECHANICAL- LEATHER Rubber outsole forepart with
28 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Cl 7.6.1 of IS 5557 (Part-2)
AND LEATHER PRODUCTS cleat thickness
Rubber outsole heel
MECHANICAL- LEATHER
29 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 rubber/polymeric abrasion ISO 4649
AND LEATHER PRODUCTS
resistance, relative volume loss
Rubber outsole heel
MECHANICAL- LEATHER
30 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 rubber/polymeric flexing Cl 8.4 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
resistance , cut growth
MECHANICAL- LEATHER
31 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Rubber outsole tear strength ISO 34-1
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
32 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Upper flexing of rubber Cl 6.5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
33 All Rubber Gum Boots and Ankle Boots Type-1 & Type-2 Width of sole at heel Table 8 Cl 3.1 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Counter stiffner of
34 Anti Riot Shoes Cl 4.10 of IS 17037
AND LEATHER PRODUCTS thermoplastic thickness
MECHANICAL- LEATHER
35 Anti Riot Shoes Sole complex cold insulation Cl 5.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
36 Anti Riot Shoes Abrasion resistance dry & wet Cl 7.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 3 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
37 Anti Riot Shoes Abrasion resistance insole Cl 7.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Abrasion resistance outsole
38 Anti Riot Shoes ISO 4649
AND LEATHER PRODUCTS relative volume loss
MECHANICAL- LEATHER Anti static shoes coated fabric
39 Anti Riot Shoes ISO 4674 (Part-1)
AND LEATHER PRODUCTS & textile tear strength
MECHANICAL- LEATHER Anti static shoes water
40 Anti Riot Shoes Cl 6.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS absorption
MECHANICAL- LEATHER Anti static shoes water
41 Anti Riot Shoes Cl 6.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS penetration
MECHANICAL- LEATHER Anti static shoes water
42 Anti Riot Shoes Cl 5.15.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS resistance test
MECHANICAL- LEATHER Anti static shoes water vapour
43 Anti Riot Shoes Cl 6.6 of IS 15298 (Part-1)
AND LEATHER PRODUCTS permeability
MECHANICAL- LEATHER
44 Anti Riot Shoes Boots weight Cl 4.3 of IS 17037
AND LEATHER PRODUCTS
Change in initial hardness out
MECHANICAL- LEATHER
45 Anti Riot Shoes sole Hardness IRHD-A after IS 300 (Part-4)
AND LEATHER PRODUCTS
Ageing
MECHANICAL- LEATHER
46 Anti Riot Shoes Collar of form thickness Cl 4.11 of IS 17037
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
47 Anti Riot Shoes Collar of leather tear strength EN ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
48 Anti Riot Shoes Collar of leather thickness Cl 4.11 of IS 17037
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Compression cum nail
49 Anti Riot Shoes Cl-5.8.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS penetration
MECHANICAL- LEATHER
50 Anti Riot Shoes Compression resistance Cl 5.5 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
51 Anti Riot Shoes Density of ,mid sole Annex-A of IS 6664
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
52 Anti Riot Shoes Dimensions of length of foot IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
53 Anti Riot Shoes Dimensions of length of last IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Energy absorption of seat
54 Anti Riot Shoes Cl 5.14 of IS 15298 (Part-1)
AND LEATHER PRODUCTS region
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 4 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
55 Anti Riot Shoes Flexing resistance of soles Cl 8.4 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Footwear electrical resistance
56 Anti Riot Shoes Cl 5.10 of IS 15298 (Part-1)
AND LEATHER PRODUCTS dry & wet condition
MECHANICAL- LEATHER
57 Anti Riot Shoes Height of upper Cl 6.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
58 Anti Riot Shoes Impact resistance of safety Cl 5.4 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Internal length of toe caps for
59 Anti Riot Shoes Cl 5.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS all sizes
MECHANICAL- LEATHER
60 Anti Riot Shoes Mid sole hardness Shore-A IS 13360 (Part-5/section-11)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
61 Anti Riot Shoes Mid sole tear strength ISO 34 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Moulded boots bond strength
62 Anti Riot Shoes Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS inter layer
MECHANICAL- LEATHER Moulded boots bond strength
63 Anti Riot Shoes Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS upper sole
MECHANICAL- LEATHER
64 Anti Riot Shoes Out sole hardness IRHD IS 3400 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
65 Anti Riot Shoes Out sole tear strength ISO 34-1
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
66 Anti Riot Shoes Outsole cleat height Cl 8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
67 Anti Riot Shoes Outsole thickness Cl 8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Penetration resistance insert of
68 Anti Riot Shoes Cl 7.2.2 of EN 12568
AND LEATHER PRODUCTS flex resistance
MECHANICAL- LEATHER Penetration resistance of non
69 Anti Riot Shoes Cl 5.2 of EN 12568
AND LEATHER PRODUCTS mettalic inserts
Penetration resistant insert of
MECHANICAL- LEATHER moulded boots dimensions
70 Anti Riot Shoes Cl 5.8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Distance between the edges
off insert
Penetration resistant inserts
MECHANICAL- LEATHER
71 Anti Riot Shoes dimensions of moulded boots Cl 5.8.1 of IS 15298(Part-1)
AND LEATHER PRODUCTS
length of lnsert of bottom
MECHANICAL- LEATHER Resistance to hot contact
72 Anti Riot Shoes Cl-8.7 of IS 15298 (Part-1)
AND LEATHER PRODUCTS outsole
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 5 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
73 Anti Riot Shoes Rubber density out sole IS 3400 (Part-9)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Slip resistance footwear
74 Anti Riot Shoes Cl 5.11 of IS 15298 (Part-1)
AND LEATHER PRODUCTS moulded boots
MECHANICAL- LEATHER
75 Anti Riot Shoes Sole complex heat insulation Cl 5.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
76 Anti Riot Shoes Threads breaking load IS 4910 (Part-3)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
77 Anti Riot Shoes Tongue leather tear strength EN ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
78 Anti Riot Shoes Tongue leather thickness Cl 4.12 of IS 17037
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tongue lining leather abrasion Annex- B Table-1 Cl 5.4 of IS
79 Anti Riot Shoes
AND LEATHER PRODUCTS resistance dry & wet 3840
Tongue lining leather color
MECHANICAL- LEATHER
80 Anti Riot Shoes fastness for Rubbing finished LF-9 of IS 6191
AND LEATHER PRODUCTS
leather dry & wet
Tongue lining leather color
MECHANICAL- LEATHER Annex-A Table-1 Cl 5.4 of IS
81 Anti Riot Shoes fastness to perspiration for
AND LEATHER PRODUCTS 3840
finished leather grey scale
MECHANICAL- LEATHER Tongue lining leather stitch
82 Anti Riot Shoes LP-8 of IS 5917
AND LEATHER PRODUCTS tear strength Double Hole
MECHANICAL- LEATHER Tongue lining leather tensile
83 Anti Riot Shoes LP-6 of IS 5914
AND LEATHER PRODUCTS strength
MECHANICAL- LEATHER
84 Anti Riot Shoes Tongue lining leather thickness LP-1 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tongue lining leather tongue
85 Anti Riot Shoes LP-9 of IS 5914
AND LEATHER PRODUCTS tear strength
MECHANICAL- LEATHER Tongue lining leather water
86 Anti Riot Shoes LP-21 of IS 5914
AND LEATHER PRODUCTS vapour permeability
MECHANICAL- LEATHER
87 Anti Riot Shoes Upper leather tear strength ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
88 Anti Riot Shoes Water absorption Insocks Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
89 Anti Riot Shoes Water absorption insole Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
90 Anti Riot Shoes Water desorption insocks Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 6 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
91 Anti Riot Shoes Water desorption insole Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
92 Anti Riot Shoes water vapour coefficient Cl 6.6 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
93 Anti Riot Shoes Width of insole at heel IS: 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
94 Anti Riot Shoes Width of insole at the joint IS: 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Breaking load Reinforcement
95 Canvas Boots, Rubber Sole IS 1969 (Part-1)
AND LEATHER PRODUCTS material - Lining
MECHANICAL- LEATHER Canvas and cotton drill
96 Canvas Boots, Rubber Sole IS 1963
AND LEATHER PRODUCTS picks/dm
MECHANICAL- LEATHER Laces fabric braided breaking
97 Canvas Boots, Rubber Sole IS 1969 (Part-1)
AND LEATHER PRODUCTS load
MECHANICAL- LEATHER Laces fabric braided color
98 Canvas Boots, Rubber Sole IS/ISO 105 C-10
AND LEATHER PRODUCTS fastness mechanical washing
MECHANICAL- LEATHER
99 Canvas Boots, Rubber Sole Length of fabric lace Cl 4.1.6.1 of IS 3736
AND LEATHER PRODUCTS
Reinforcement material , back
MECHANICAL- LEATHER
100 Canvas Boots, Rubber Sole seam joining two quarters at Table-1 Cl 4.1.4 of IS 3736
AND LEATHER PRODUCTS
break of heel width
MECHANICAL- LEATHER Rubber components sole &
101 Canvas Boots, Rubber Sole IS 3400 (Part-10/Section-1)
AND LEATHER PRODUCTS heel compression set %
MECHANICAL- LEATHER Threads for upper closing color
102 Canvas Boots, Rubber Sole IS/ISO 105-C 04
AND LEATHER PRODUCTS fastness perspiration
MECHANICAL- LEATHER Threads for upper closing color
103 Canvas Boots, Rubber Sole IS/ISO 105-C10
AND LEATHER PRODUCTS fastness washing
MECHANICAL- LEATHER Elongation at Break after
104 Canvas Shoes , Rubber Sole Canvas Boots , Rubber Sole IS 3400 (Part-1)
AND LEATHER PRODUCTS ageing of Outsole Rubber Sole
MECHANICAL- LEATHER Colour Fastness To light of
105 Canvas Shoes ,Canvas Boots ,Rubber sole , Sports Shoes IS/ISO 105-B01
AND LEATHER PRODUCTS textile material
Canvas Shoes ,Rubber sole , Safety Boots & shoes for
heavy metal Industries, Leather Safety Footwear with
MECHANICAL- LEATHER
106 Direct Moulded PVC Sole Type-1 & Type 2 , Canvas Boots, Ends/dm IS: 1963
AND LEATHER PRODUCTS
Rubber Sole , Slipper Rubber, Leather Safety boots & Shoes
for minors
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 7 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Canvas Shoes ,Rubber sole , Safety Boots & shoes for
heavy metal Industries, Leather Safety Footwear with
MECHANICAL- LEATHER
107 Direct Moulded PVC Sole Type-1 & Type 2 , Canvas Boots, Pics/dm IS:1963
AND LEATHER PRODUCTS
Rubber Sole , Slipper Rubber, Leather Safety boots & Shoes
for minors
MECHANICAL- LEATHER Tensile Strength After Ageing
108 Canvas Shoes, Rubber Sole Canvas Boots , Rubber Sole IS 3400(Part-1)
AND LEATHER PRODUCTS of Rubber sole
MECHANICAL- LEATHER
109 Canvas shoes, Rubber Sole Canvas Boots , Rubber Sole Cotton Drill Ends IS:1963
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Consolidation Test of adhesion
110 Canvas Shoes, Rubber Sole IS 3400 (Part-5)
AND LEATHER PRODUCTS of rubber to textile fabric
MECHANICAL- LEATHER Adhesion Test of rubber to
111 Canvas Shoes, Rubber Sole Cl 3.1 of IS 3400 (Part-5)
AND LEATHER PRODUCTS textile fabric
MECHANICAL- LEATHER Color Fastness to Perspiration
112 Canvas Shoes, Rubber Sole IS/ISO 105 E04
AND LEATHER PRODUCTS of threads upper closing
MECHANICAL- LEATHER Color Fastness to Washing of
113 Canvas Shoes, Rubber Sole IS/ISO 105-C10
AND LEATHER PRODUCTS Thread for Upper Closing
MECHANICAL- LEATHER
114 Canvas Shoes, Rubber Sole Cotton Drill Picks IS 1963
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Eyelets brass, Steel Aluminum
115 Canvas Shoes, Rubber Sole Cl 4.1.4 of IS 3735
AND LEATHER PRODUCTS Collar Diameter
MECHANICAL- LEATHER Eyelets Brass, Steel Aluminum
116 Canvas Shoes, Rubber Sole Cl 4.1.4 of IS 3735
AND LEATHER PRODUCTS Wall Thickness
MECHANICAL- LEATHER
117 Canvas Shoes, Rubber Sole Length of lace Cl 4.1.5 of IS 3735
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
118 Canvas Shoes, Rubber Sole Mass Of Shoes Cl 4.6 of IS 3735
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Rubber Components Outer Sole
119 Canvas Shoes, Rubber Sole IS 3400 (Part-10/Section-2)
AND LEATHER PRODUCTS & Heel Compression Set
MECHANICAL- LEATHER Rubber Components Outer Sole
120 Canvas Shoes, Rubber Sole IS 3400(Part-1)
AND LEATHER PRODUCTS & Heel Elongation at Break
MECHANICAL- LEATHER Rubber Components Outer Sole
121 Canvas Shoes, Rubber Sole IS 3400 (Part-4)
AND LEATHER PRODUCTS & Heel Flexing Resistance
Tensile Strength of Rubber
MECHANICAL- LEATHER
122 Canvas Shoes, Rubber Sole Components in Outer Sole & Cl 3.3 of IS 3400 (Part-1)
AND LEATHER PRODUCTS
Heel
MECHANICAL- LEATHER Thickness of all Components of
123 Canvas Shoes, Rubber Sole Table-6 Cl 4.1.6.3 of IS 3735
AND LEATHER PRODUCTS Canvas Shoes, Rubber Sole
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 8 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Relative Density of Rubber
MECHANICAL- LEATHER
124 Canvas Shoes, Rubber Sole , Derby Shoes Components in Outer Sole & IS 3400 (Part-9)
AND LEATHER PRODUCTS
Heel
Hardness (IRHD) of Rubber
MECHANICAL- LEATHER Canvas Shoes, Rubber Sole , Safety Rubber Canvas Boots,
125 Components in Outer Sole & IS 3400(Part-2)
AND LEATHER PRODUCTS For Minors , Derby Shoes
Heel
MECHANICAL- LEATHER Color fastness to washing of
126 Canvas Shoes, Rubber Sole ,Canvas Boots IS/ISO 105-C10
AND LEATHER PRODUCTS textile Fabric
Breaking Load Weft Way
MECHANICAL- LEATHER Canvas Shoes, Rubber Sole ,Canvas Boots ,Leather Safety
127 (Canvas & Cotton Drill) Fabric / IS 1969 (Part-1)
AND LEATHER PRODUCTS Boots & Shoes For Minors , Sports Footwear
Tensile strength
Breaking Load Warp Way
MECHANICAL- LEATHER Canvas Shoes, Rubber Sole ,Canvas Boots ,Rubber Sole ,
128 (Canvas & Cotton Drill) Fabrics IS 1969 (Part-1)
AND LEATHER PRODUCTS Sports Footwear
/ Tensile Strength
MECHANICAL- LEATHER Canvas Shoes, Rubber Sole ,Leather safety boots & Shoes Breaking Strength of Fabric
129 IS 1969 (Part-1)
AND LEATHER PRODUCTS For Minors , Sports Footwear Lace
Change in initial hardness after
accelerated ageing for 24 h at
MECHANICAL- LEATHER Canvas Shoes, Rubber Sole ,Safety Rubber Canvas Boots,
130 100 ± 1°C of Rubber Cl 3.2 of IS 3400 (Part-4)
AND LEATHER PRODUCTS For Minors , Derby Shoes
Components in Outer Sole &
Heel
MECHANICAL- LEATHER Canvas Shoes, Rubber Sole And Safety Rubber Canvas
131 Width of Binding Material Cl 8 of IS 1954
AND LEATHER PRODUCTS Boots, For Minors
MECHANICAL- LEATHER Breaking Load of Upper Closing
132 Canvas Shoes, Rubber Sole, Canvas Boots , Rubber Sole Cl 3.1 of IS 1670
AND LEATHER PRODUCTS Thread
MECHANICAL- LEATHER Breaking Load of Binding
133 Canvas Shoes, Rubber Sole, Canvas Boots, Rubber Sole Cl 3.2 of IS 1969 (Part-1)
AND LEATHER PRODUCTS Material
MECHANICAL- LEATHER
134 Derby shoes Flexing resistance of Outsole Cl 8.4 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
135 Derby Shoes laces breaking load IS 1969 (Part-1)
AND LEATHER PRODUCTS
Abrasion resistance - Upper
MECHANICAL- LEATHER
136 Derby Shoes lining, insock material (Dry and Cl 6.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
Wet ) condition
MECHANICAL- LEATHER Abrasion resistance Insole
137 Derby Shoes Cl 7.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS material
MECHANICAL- LEATHER Antistatic footwear eyelets pull
138 Derby shoes Cl 4.14 of IS 17043
AND LEATHER PRODUCTS out test
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 9 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Antistatic footwear in socks
MECHANICAL- LEATHER
139 Derby Shoes rubber /polymer/elastomer Cl 4.9 of IS 17043
AND LEATHER PRODUCTS
thickness
MECHANICAL- LEATHER
140 Derby shoes Antistatic footwear laces length Cl 4.15.1 of IS 17043
AND LEATHER PRODUCTS
Antistatic footwear outsole/PU
MECHANICAL- LEATHER
141 Derby shoes midsole /Rubber sole Tear ISO 34-1
AND LEATHER PRODUCTS
strength for PU midsole
MECHANICAL- LEATHER Antistatic footwear outsole/PU
142 Derby Shoes ISO 34-1
AND LEATHER PRODUCTS sole Abrasion resistance
MECHANICAL- LEATHER Antistatic Footwear sole
143 Derby Shoes Cl 5.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS complex cold insulation test
MECHANICAL- LEATHER Antistatic footwear toe puff
144 Derby Shoes Cl 4.10 of IS 17043
AND LEATHER PRODUCTS thickness & counter stiffener
MECHANICAL- LEATHER Antistatic footwear tongue
145 Derby Shoes ISO 3377-2
AND LEATHER PRODUCTS leather tear strength
MECHANICAL- LEATHER Antistatic footwear water
146 Derby Shoes Cl 6.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS penetration
MECHANICAL- LEATHER Antistatic footwear water
147 Derby Shoes Cl 6.6 of IS 15298 (Part-1)
AND LEATHER PRODUCTS permeability
MECHANICAL- LEATHER Antistatic footwear water
148 Derby Shoes Cl 6.8 of IS 15298 (Part-1)
AND LEATHER PRODUCTS vapour coeeficient
MECHANICAL- LEATHER Breaking strength of Closing
149 Derby shoes CI 7.1 IS 4910 (Part-3)
AND LEATHER PRODUCTS Threads (yarn)
MECHANICAL- LEATHER
150 Derby shoes Cleat Height of cleat height Cl 8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
Color fastness test to
MECHANICAL- LEATHER
151 Derby Shoes perspiration grey scale- Lining Annex-A IS 3840
AND LEATHER PRODUCTS
leather
MECHANICAL- LEATHER Density of direct moulded PU
152 Derby shoes Annex-A IS 6664
AND LEATHER PRODUCTS midsole
MECHANICAL- LEATHER Double hole Stitch Tear
153 Derby Shoes LP-8 of IS 5914
AND LEATHER PRODUCTS Strength - lining leather
Electrical resistance test
MECHANICAL- LEATHER
154 Derby Shoes Dry/Wet atmosphere -Antistatic Cl 5.10 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
footwear
MECHANICAL- LEATHER Hardnes (Shore) Midsole PU
155 Derby shoes IS 13360 (Part-5/Section-11)
AND LEATHER PRODUCTS moulded
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 10 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
156 Derby Shoes Height of the Upper Table-3 IS 17043
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
157 Derby shoes Insole Material thickness Cl 4.8.1 IS 17043
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
158 Derby Shoes Inter layer bond strength Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
159 Derby shoes laces tag retention Annex -H IS 15844
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
160 Derby Shoes length of fittings Cl 3.1 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
161 Derby shoes length of foot Cl 3.1 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
162 Derby Shoes length of last Cl 3.1 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
163 Derby Shoes Slip resistance Cl-5.11 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tear Load (Double edge) -
164 Derby Shoes ISO 3377(Part-2)
AND LEATHER PRODUCTS lining leather
MECHANICAL- LEATHER Tear Load of Upper Material-
165 Derby Shoes ISO 3377 (Part-1)
AND LEATHER PRODUCTS leather
MECHANICAL- LEATHER
166 Derby shoes Thickness of Outsole Material Cl 8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Thickness of Upper / Lining
167 Derby Shoes LP-1 IS 5914
AND LEATHER PRODUCTS Material- Leather
MECHANICAL- LEATHER
168 Derby Shoes Tongue leather thickness Cl 4.11.1 of IS 17043
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
169 Derby Shoes Tongue tear Test of - leather LP-9 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
170 Derby Shoes Upper sole bond strength Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Water absorption of insole,
171 Derby shoes Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Insocks
MECHANICAL- LEATHER
172 Derby shoes Water Desorption of Insole Cl 7.2 IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Water vapour coefficient-
173 Derby shoes Cl 6.8 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Lining Material
MECHANICAL- LEATHER Water vapour permeability-
174 Derby Shoes LP-21 of IS 5914
AND LEATHER PRODUCTS Lining leather
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 11 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
175 Derby Shoes Weight of Derby Shoe Pair Table-2 IS 17043
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Whole Footwear Energy
176 Derby Shoes Cl 5.14 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Absorption Of seat Region
MECHANICAL- LEATHER Whole Footwear Heat
177 Derby Shoes Cl 5.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Insulation test of Sole Complex
Tear strength of Upper
MECHANICAL- LEATHER
178 Dreby Shoes material -Coated fabric & ISO 4674 (Part 1) Method B
AND LEATHER PRODUCTS
textile
MECHANICAL- LEATHER
179 Footware, Polymer, Rubber & Rubber Products Identification of Material ASTM E 1252
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
180 Footware, Polymer, Rubber & Rubber Products Identification of Material ASTM E 168
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Abrasion Resistance lining and
181 Footwear for Men & Women for Municipal Scavenging Work Cl 6.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Insole
MECHANICAL- LEATHER Abrasion resistance of lining
182 Footwear for Men & Women for Municipal Scavenging Work Cl 6.12 of IS EN ISO 20344
AND LEATHER PRODUCTS and insocks
MECHANICAL- LEATHER Abrasion resistance of out sole
183 Footwear for Men & Women for Municipal Scavenging Work Method-A of ISO 4649
AND LEATHER PRODUCTS Rubber , thermoplastics
MECHANICAL- LEATHER Bond Strength of Inter/Outer
184 Footwear for Men & Women for Municipal Scavenging Work Cl 5.2 IS 15298 (Part-1)
AND LEATHER PRODUCTS layer
MECHANICAL- LEATHER Change in IRHD hardness after
185 Footwear for Men & Women for Municipal Scavenging Work IS 3400 (Part-4)
AND LEATHER PRODUCTS ageing Of outsole
MECHANICAL- LEATHER Collapsing load of Toe and
186 Footwear for Men & Women for Municipal Scavenging Work Annex-A-3.2.6 of 7554:
AND LEATHER PRODUCTS Counter stiffner
MECHANICAL- LEATHER compression resistance of
187 Footwear for Men & Women for Municipal Scavenging Work Cl 5.5 of EN ISO 20344
AND LEATHER PRODUCTS Protective Footwear
MECHANICAL- LEATHER Flexing resistance of Upper
188 Footwear for Men & Women for Municipal Scavenging Work Cl 6.5. IS 15298 (Part-1)
AND LEATHER PRODUCTS rubber
MECHANICAL- LEATHER
189 Footwear for Men & Women for Municipal Scavenging Work Hydrolysis of Upper ISO: 5423
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Impact resistance of Protective
190 Footwear for Men & Women for Municipal Scavenging Work Cl 5.4 of EN ISO 20344
AND LEATHER PRODUCTS footwear
MECHANICAL- LEATHER
191 Footwear for Men & Women for Municipal Scavenging Work Insole Thickness Cl 7.1 IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
192 Footwear for Men & Women for Municipal Scavenging Work Insole water Desorption Cl 7.2.5.2 IS 15298 (Part-1)
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 12 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
193 Footwear for Men & Women for Municipal Scavenging Work Insole water absorption Cl 7.2.5.2 IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER IRHD hardness of Outsole
194 Footwear for Men & Women for Municipal Scavenging Work IS 3400 (Part-2)
AND LEATHER PRODUCTS rubber
MECHANICAL- LEATHER Lining Class I & II water vapour
195 Footwear for Men & Women for Municipal Scavenging Work Cl 6.8 IS 15298 (Part-1)
AND LEATHER PRODUCTS coefficient
MECHANICAL- LEATHER Lining Class I & II water vapour
196 Footwear for Men & Women for Municipal Scavenging Work Cl 6.6 of EN ISO 20344
AND LEATHER PRODUCTS permeability
MECHANICAL- LEATHER Moisture resistance % of Toe
197 Footwear for Men & Women for Municipal Scavenging Work Annex-A of 7554
AND LEATHER PRODUCTS and Counter stiffner
MECHANICAL- LEATHER Peel strength of Toe and
198 Footwear for Men & Women for Municipal Scavenging Work Annex-B of IS 7554
AND LEATHER PRODUCTS Counter stiffner
MECHANICAL- LEATHER Resilience percent of Toe and
199 Footwear for Men & Women for Municipal Scavenging Work Annex-A-3.4 of IS 7554
AND LEATHER PRODUCTS Counter stiffner
MECHANICAL- LEATHER Stiffner Area of Counter stiffner Annex-A-3.3 to A-3.1.12 of IS
200 Footwear for Men & Women for Municipal Scavenging Work
AND LEATHER PRODUCTS and Toe 7554
MECHANICAL- LEATHER
201 Footwear for Men & Women for Municipal Scavenging Work Tear strength lining leather ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tear strength of lining coated
202 Footwear for Men & Women for Municipal Scavenging Work Method-B of ISO 4674 (Part-1)
AND LEATHER PRODUCTS fabric & Textile
MECHANICAL- LEATHER
203 Footwear for Men & Women for Municipal Scavenging Work Tear strength of Outsole Method-A ISO 34-1
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tear Strength of Upper coated
204 Footwear for Men & Women for Municipal Scavenging Work ISO 4647 (Part-1)
AND LEATHER PRODUCTS fabric & textile
MECHANICAL- LEATHER
205 Footwear for Men & Women for Municipal Scavenging Work Tear Strength of Upper leather ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
206 Footwear for Men & Women for Municipal Scavenging Work Thickness of Upper Polymer Method A ISO 23529
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Upper tensile properties
207 Footwear for Men & Women for Municipal Scavenging Work Cl 6.4.2.2 of EN ISO 20344
AND LEATHER PRODUCTS breaking force rubber
MECHANICAL- LEATHER Upper tensile properties
208 Footwear for Men & Women for Municipal Scavenging Work ISO 3376
AND LEATHER PRODUCTS leather split
MECHANICAL- LEATHER Upper/ lining tear strength
209 Footwear for Men & Women for Municipal Scavenging Work ISO 3377 (Part-2)
AND LEATHER PRODUCTS leather
MECHANICAL- LEATHER Whole footwear leak proofness
210 Footwear for Men & Women for Municipal Scavenging Work Cl 5.7.1 IS 15298
AND LEATHER PRODUCTS test
MECHANICAL- LEATHER
211 Footwear for Men & Women for Municipal Scavenging Work Whole footwear Ageing test Cl 7.10 of IS 16994
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 13 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Polymeric modulus at 100%
212 ISO 4643
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 Elongation %
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Polyurethane outsole
213 Annex-C ISO 5423
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 hydrolysis cut growth
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Protective toe cap compression
214 Cl 5.5 of EN ISO 20344
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 resistance
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Protective toe cap impact test
215 Cl 5.4 of EN ISO 20344
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 of all sizes
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work
216 Rubber breaking force Cl 6.4.2.2 of EN ISO 20344
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work
217 Thickness of heel with cleat Cl 7.7 of IS 16994
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work
218 Thickness of heel with out cleat Cl 7.7 of IS 16994
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Thickness of outsole forepart
219 Cl 7.7 of IS 16994
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 with cleat
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Thickness of outsole forepart
220 Cl 7.7 of IS 16994
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 with cleat
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Toe cap internal length of all
221 Cl 5.3.2.2 of EN ISO 20344
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 sizes
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Upper class II Flexing
222 Annex-B of ISO 4643
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 resistance Polymeric
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work Upper tensile properties
223 ISO :3376
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3 Elongation at break
Upper Tensile properties
MECHANICAL- LEATHER Footwear for Men & Women for Municipal Scavenging Work
224 modulus at 100% Elongation ISO :4643
AND LEATHER PRODUCTS Type 1 to Type 3, Variety 1 to Variety 3
polymer
MECHANICAL- LEATHER Abrasion resistance Dry & Wet
225 High ankle tactical boots with PU rubber sole Cl 7.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS condition
MECHANICAL- LEATHER
226 High Ankle Tactical Boots with PU Rubber Sole Cold insulation sole complex Cl 5.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
227 High ankle tactical boots with PU rubber sole Collar leather tear strength ISO 3377(Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
228 High ankle tactical boots with PU rubber sole Collar leather thickness Cl 4.11 of IS 17012
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Color fastness Dry & Wet
229 High Ankle Tactical Boots with PU Rubber Sole LF-9 of IS 6191
AND LEATHER PRODUCTS Rubbing
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 14 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Counter & tongue lining leather
230 High Ankle Tactical Boots with PU Rubber Sole LP-6 of IS 5914
AND LEATHER PRODUCTS Tensile strength
MECHANICAL- LEATHER Counter & tongue lining leather
231 High Ankle Tactical Boots with PU Rubber Sole LP-1 of IS 5914
AND LEATHER PRODUCTS thickness
MECHANICAL- LEATHER Counter & Tongue lining
232 High Ankle Tactical Boots with PU Rubber Sole LP-9 of IS 5914
AND LEATHER PRODUCTS leather Tongue tear strength
MECHANICAL- LEATHER Energy Absorption of seat
233 High Ankle Tactical Boots with PU Rubber Sole Cl 5.14 of IS 15298 (Part-1)
AND LEATHER PRODUCTS region
MECHANICAL- LEATHER Energy absorption of seat
234 High Ankle Tactical Boots with PU Rubber Sole Cl 5.14 of IS 15298 (Part-1)
AND LEATHER PRODUCTS region
MECHANICAL- LEATHER
235 High Ankle Tactical Boots with PU Rubber Sole Heat insulation sole complex Cl 5.12 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
236 High Ankle Tactical Boots with PU Rubber Sole Height of upper Cl 6.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
237 High ankle tactical boots with PU rubber sole Insocks water Absorption Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
238 High ankle tactical boots with PU rubber sole Insocks water Desorption Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
239 High Ankle Tactical Boots with PU Rubber Sole Insole thickness Cl 4.9.1 of IS 17012
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
240 High ankle tactical boots with PU rubber sole insole abrasion resistances Cl 7.3 of IS 15298
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
241 High ankle tactical boots with PU rubber sole Insole water absorption Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
242 High ankle tactical boots with PU rubber sole Insole water desorption Cl 7.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
243 High Ankle Tactical Boots with PU Rubber Sole Inter layer bond strength Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
244 High ankle tactical boots with PU rubber sole Laces breaking load IS 1969 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
245 High ankle tactical boots with PU rubber sole Laces length IS 1954
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
246 High ankle tactical boots with PU rubber sole Laces tag retention IS 1969 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Leather Abrasion resistance
247 High Ankle Tactical Boots with PU Rubber Sole Annex-B of IS 3840
AND LEATHER PRODUCTS Dry and Wet Rubbing
MECHANICAL- LEATHER Leather color fastness
248 High Ankle Tactical Boots with PU Rubber Sole LB: 4 of IS 6191
AND LEATHER PRODUCTS perspiration
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 15 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather water vapour
249 High Ankle Tactical Boots with PU Rubber Sole LP-21 of IS 5914
AND LEATHER PRODUCTS permeability
MECHANICAL- LEATHER
250 High Ankle Tactical Boots with PU Rubber Sole Lining tear strength of leather ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Out sole resistance to hot
251 High ankle tactical boots with PU rubber sole Cl 8.7 of IS 15298 (Part-1)
AND LEATHER PRODUCTS contact
MECHANICAL- LEATHER
252 High ankle tactical boots with PU rubber sole Outsole Abrasion Resistance ISO 4649
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
253 High ankle tactical boots with PU rubber sole Outsole density rubber IS 3400 (Part-9)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
254 High ankle tactical boots with PU rubber sole Outsole tera strength ISO 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Outsole/PU mid sole / rubber
255 High ankle tactical boots with PU rubber sole Cl 8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS outsole Cleat height
MECHANICAL- LEATHER Outsole/PU mid sole/rubber
256 High ankle tactical boots with PU rubber sole Cl 8.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS outsole thickness
MECHANICAL- LEATHER
257 High ankle tactical boots with PU rubber sole PU form thickness Cl 4.11 of IS 17012
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
258 High ankle tactical boots with PU rubber sole PU midsole Density Annex-A of IS 6664
AND LEATHER PRODUCTS
PU rubber sole change in
MECHANICAL- LEATHER
259 High ankle tactical boots with PU rubber sole hardness IRHD of rubber sole Cl 8.2 of IS 3400 (Part-4)
AND LEATHER PRODUCTS
after ageing
MECHANICAL- LEATHER PU rubber sole flexing
260 High ankle tactical boots with PU rubber sole Cl 8.4 of IS 15298 (Part-1)
AND LEATHER PRODUCTS resistance cut growth
MECHANICAL- LEATHER PU Rubber sole mid sole
261 High ankle tactical boots with PU rubber sole IS 13360 (Part-5/Section-11)
AND LEATHER PRODUCTS hardness
MECHANICAL- LEATHER PU rubber sole out sole
262 High ankle tactical boots with PU rubber sole Cl 8.2 of IS 3400 (Part-2)
AND LEATHER PRODUCTS hardness
MECHANICAL- LEATHER Resistance to fuel oil increase
263 High ankle tactical boots with PU rubber sole Cl 8.6.1 of IS 15298 (Part-1)
AND LEATHER PRODUCTS in volume
MECHANICAL- LEATHER
264 High ankle tactical boots with PU rubber sole Sewing threads breaking load IS 4910 (Part-3)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
265 High Ankle Tactical Boots with PU Rubber Sole Slip resistance Cl 5.11 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Stitch tear strength Double
266 High Ankle Tactical Boots with PU Rubber Sole LP-8 of IS 5914
AND LEATHER PRODUCTS hole
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 16 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Tear strength coated fabric
267 High Ankle Tactical Boots with PU Rubber Sole ISO 4674 (Part-1)
AND LEATHER PRODUCTS textile
MECHANICAL- LEATHER
268 High Ankle Tactical Boots with PU Rubber Sole Tear strength of coated fabric Method-B of ISO 4674-1
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Toe puff & counter stiffener
269 High ankle tactical boots with PU rubber sole Cl 4.8 of IS 17012
AND LEATHER PRODUCTS thickness
Tongue leather laminated with
MECHANICAL- LEATHER
270 High ankle tactical boots with PU rubber sole Non woven textile fabric tear ISO 4674 (Part-1)
AND LEATHER PRODUCTS
strength
Tongue leather laminated with
MECHANICAL- LEATHER
271 High ankle tactical boots with PU rubber sole Non woven textile Fabric Cl 4.12.1 of IS 17012
AND LEATHER PRODUCTS
thickness
MECHANICAL- LEATHER
272 High Ankle Tactical Boots with PU Rubber Sole Upper leather tear strength ISO 3377 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
273 High Ankle Tactical Boots with PU Rubber Sole Upper leather water absorption Cl 6.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Upper leather water
274 High Ankle Tactical Boots with PU Rubber Sole Cl 6.13 of IS 15298 (Part-1)
AND LEATHER PRODUCTS penetration
MECHANICAL- LEATHER Upper leather water vapour
275 High Ankle Tactical Boots with PU Rubber Sole Cl 6.8 of IS 15298(Part-1)
AND LEATHER PRODUCTS coefficient
MECHANICAL- LEATHER Upper leather water vapour
276 High Ankle Tactical Boots with PU Rubber Sole Cl 6.6 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Permeability
MECHANICAL- LEATHER
277 High Ankle Tactical Boots with PU Rubber Sole Upper outsole bond strength Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
278 High ankle tactical boots with PU rubber sole Water vapour corfficent Cl 6.8 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
279 High ankle tactical boots with PU rubber sole Water vapour permeability Cl 6.6 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
280 High Ankle Tactical Boots with PU Rubber Sole weight of pair of boots Cl 4.3.2 of IS 17012
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Whole footwear electrical
281 High Ankle Tactical Boots with PU Rubber Sole Cl 5.10 of IS 15298 (Part-1)
AND LEATHER PRODUCTS resistance antistatic
MECHANICAL- LEATHER
282 Industrial & Protective Rubber Knee & Ankle Boots Flexing resistance of Upper Annex-B Cl 5.1.7.3 of IS 5557
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Breaking load of Upper fabric -
283 Industrial & Protective Rubber Knee & Ankle Boots IS 1969 (Part-1)
AND LEATHER PRODUCTS warp way
MECHANICAL- LEATHER Breaking load of Upper fabric -
284 Industrial & Protective Rubber Knee & Ankle Boots IS 1969 (Part-1)
AND LEATHER PRODUCTS weft way
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 17 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER change initial hardness after
285 Industrial & Protective Rubber Knee & Ankle Boots IS 3400 (Part-4)
AND LEATHER PRODUCTS accelerating ageing of Rubber
MECHANICAL- LEATHER Components Accelerated heat
286 Industrial & Protective Rubber Knee & Ankle Boots IS 3400 (Part-4)
AND LEATHER PRODUCTS treatment
MECHANICAL- LEATHER Composite upper Breaking load
287 Industrial & Protective Rubber Knee & Ankle Boots Cl 5.1.7.2 of IS 5557
AND LEATHER PRODUCTS of both at vamp
MECHANICAL- LEATHER
288 Industrial & Protective Rubber Knee & Ankle Boots Consolidation test IS 3400 (Part-5)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
289 Industrial & Protective Rubber Knee & Ankle Boots Elongation at break IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Elongation at break before
290 Industrial & Protective Rubber Knee & Ankle Boots IS 3400 (Part-1)
AND LEATHER PRODUCTS ageing
MECHANICAL- LEATHER Annex-B of Cl 5.1.7.3 of IS
291 Industrial & Protective Rubber Knee & Ankle Boots Flexing resistance of Sole
AND LEATHER PRODUCTS 5557
MECHANICAL- LEATHER Hardness of Rubber
292 Industrial & Protective Rubber Knee & Ankle Boots IS 3400 (Part-2)
AND LEATHER PRODUCTS components
MECHANICAL- LEATHER
293 Industrial & Protective Rubber Knee & Ankle Boots Height of the boot Cl 5.1.7.7 of IS 5557
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Leakage Resistance test of
294 Industrial & Protective Rubber Knee & Ankle Boots Cl 5.1.7.4 of IS 5557
AND LEATHER PRODUCTS boot
MECHANICAL- LEATHER
295 Industrial & Protective Rubber Knee & Ankle Boots Performance test Cl 5.1.7.6 of IS 5557
AND LEATHER PRODUCTS
Relative density of Rubber
MECHANICAL- LEATHER
296 Industrial & Protective Rubber Knee & Ankle Boots Component (upper ,outer sole IS 3400 (Part-9)
AND LEATHER PRODUCTS
& heel)
MECHANICAL- LEATHER
297 Industrial & Protective Rubber Knee & Ankle Boots Resistance to oil test Cl 5.1.7.8 Annex E of IS 5557
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Rubber components Tensile
298 Industrial & Protective Rubber Knee & Ankle Boots IS 3400 (Part-1)
AND LEATHER PRODUCTS strength before ageing
MECHANICAL- LEATHER
299 Industrial & Protective Rubber Knee & Ankle Boots Steel toe cap Dimensions IS 5852
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tensile strength after
300 Industrial & Protective Rubber Knee & Ankle Boots IS 3400 (Part-1)
AND LEATHER PRODUCTS accelerating ageing
MECHANICAL- LEATHER All leather components
301 Leather safety & shoes for miners Table 1 IS 1989 (Part-1)
AND LEATHER PRODUCTS thickness
MECHANICAL- LEATHER Shear strength of joint rubber
302 Leather safety boots & shoes for minors Annex-B of IS 4663
AND LEATHER PRODUCTS Based/ Adhesives
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 18 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Abrasion Resistance of
303 Leather safety boots & shoes for minors Annex-A of IS 579
AND LEATHER PRODUCTS Vegetable Tanned Sole Leather
MECHANICAL- LEATHER Bitumen based felt breaking
304 Leather safety boots & shoes for minors IS 13826 (Part-1)
AND LEATHER PRODUCTS strength weft & warp way
MECHANICAL- LEATHER Bitumen based felts Heat
305 Leather Safety boots & Shoes for minors IS 13826 (Part-5)
AND LEATHER PRODUCTS resistance test
MECHANICAL- LEATHER Bitumen based felts Pliability
306 Leather safety boots & shoes for minors IS 13826 (Part-2)
AND LEATHER PRODUCTS test
MECHANICAL- LEATHER Bitumen based felts Pressure
307 Leather Safety boots & Shoes for minors IS 13826 (Part-4)
AND LEATHER PRODUCTS head test
MECHANICAL- LEATHER Bitumen based felts Storage
308 Leather safety boots & Shoes for minors IS 13826 (Part-3)
AND LEATHER PRODUCTS sticking test
MECHANICAL- LEATHER Bitumen based felts Water
309 Leather Safety boots & Shoes for minors IS 13826 (Part-6)
AND LEATHER PRODUCTS absorption test
MECHANICAL- LEATHER Bottom Material Leather Water
310 Leather safety boots & shoes for minors LP-12 of IS 5914
AND LEATHER PRODUCTS absorption
MECHANICAL- LEATHER Bottom material Leather
311 Leather safety boots & shoes for minors LP-5 of IS 5914
AND LEATHER PRODUCTS Apparent Density
MECHANICAL- LEATHER Brass screw wire performance
312 Leather Safety boots & Shoes for minors Cl 4.5 of IS 8606
AND LEATHER PRODUCTS test
MECHANICAL- LEATHER
313 Leather Safety boots & Shoes for minors Brass wire wrapping test Cl 5.2 of IS 4413
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
314 Leather safety boots & shoes for minors Design of Safety Shoes Cl 13.0 of IS 1989 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
315 Leather safety boots & shoes for minors Elongation at Break LP-6 Cl 2.0.4 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Elongation at break % before
316 leather Safety boots & Shoes for minors IS 3400 (Part-1)
AND LEATHER PRODUCTS Ageing
MECHANICAL- LEATHER
317 Leather Safety boots & Shoes for minors Eyelets Dimeter Dimensions Table-1 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
318 Leather safety boots & Shoes for minors Finished Footwear Mass Cl 5.5 of IS 3976
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Footwear Energy Absorption
319 Leather safety boots & Shoes for minors Cl 5.14 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Test of Seat Region
MECHANICAL- LEATHER Grain crack index of leather
320 Leather safety boots & shoes for minors LP-13 of IS 5914
AND LEATHER PRODUCTS bottom material
MECHANICAL- LEATHER Hardness (Shore A/B) of
321 Leather safety boots & shoes for minors Table 1 of IS 4663
AND LEATHER PRODUCTS Rubber Based Adhesives
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 19 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
322 Leather safety boots & shoes for minors Heel pin all dimensions Cl 14.12 of IS 1998 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Table-4 Cl 5.2.2 of IS 15298
323 Leather safety boots & Shoes for minors Height of Upper
AND LEATHER PRODUCTS (Part-2)
MECHANICAL- LEATHER
324 Leather safety boots & shoes for minors Impact test of safety boots Cl 18.1 of IS 1989 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
325 Leather safety boots & shoes for minors Impact test of Safety Shoes Cl 12.1 IS 1989 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
326 Leather safety boots & shoes for minors Laces defence tests Table-2 Cl 3.1 of IS 4778
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Laces Defence use Breaking
327 Leather safety boots & shoes for minors Table 2 of IS 4778
AND LEATHER PRODUCTS strength
MECHANICAL- LEATHER Laces Defence use dimensions
328 Leather safety boots & shoes for minors Table-2 of IS 4778
AND LEATHER PRODUCTS length
MECHANICAL- LEATHER Table-2 (v) Cl 3.5, A-5 of IS
329 Leather safety boots & shoes for minors Laces Defence use flat width
AND LEATHER PRODUCTS 4778
MECHANICAL- LEATHER Laces defence use total
330 Leather safety boots & shoes for minors Cl 14.14 of IS 1989 (Part-1)
AND LEATHER PRODUCTS number of Ends
MECHANICAL- LEATHER Laces General use Slip
331 Leather safety boots & shoes for minors Table-1 (iv) A-3 of IS 4778
AND LEATHER PRODUCTS Resistance
MECHANICAL- LEATHER
332 Leather safety boots & shoes for minors Laces gripping Strength Cl 8.14 of IS 1998 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
333 Leather Safety boots & Shoes for minors Laces length A2 Cl. 3.1 IS 4778
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
334 Leather safety boots & shoes for minors Lining leather thickness LP-1 IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Lining Material Breaking
335 Leather safety boots & shoes for minors IS 1969 (Part-1)
AND LEATHER PRODUCTS strength warp way
MECHANICAL- LEATHER lining material Breaking
336 Leather safety boots & shoes for minors IS 1969 (Part-1)
AND LEATHER PRODUCTS strength weft way
MECHANICAL- LEATHER Mass of Boots with Leather
337 Leather safety boots & shoes for minors Cl 11.1 of IS 1998 (Part-1)
AND LEATHER PRODUCTS Sole and Heel
MECHANICAL- LEATHER Mass of Boots with rubber sole
338 Leather safety boots & shoes for minors Cl 11.2 of IS 1989 (Part-1)
AND LEATHER PRODUCTS & heel
MECHANICAL- LEATHER Mass of boots with rubber sole
339 Leather safety boots & shoes for minors Cl 17.1 of IS 1989 (Part-1)
AND LEATHER PRODUCTS and heel
MECHANICAL- LEATHER A-6 Table-2 (V) Cl 3.5 of IS
340 Leather safety boots & shoes for minors Mass of Laces defence use
AND LEATHER PRODUCTS 4778
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 20 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Peeling Load Rubber Based
341 Leather safety boots & shoes for minors Table 1 of IS 4668
AND LEATHER PRODUCTS Adhesives
MECHANICAL- LEATHER
342 Leather safety boots & shoes for minors Pressure head test IS 13826 (Part-4)
AND LEATHER PRODUCTS
Resistance to cracking of
MECHANICAL- LEATHER
343 Leather safety boots & shoes for minors bottom material vegetable Cl 14.3 of IS 1989 (Part-1)
AND LEATHER PRODUCTS
tanned or sole leather
MECHANICAL- LEATHER
344 Leather Safety boots & Shoes for minors Rivots dimensions Cl 8.10 of IS 1989 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Safety Boots Internal Length of
345 Leather safety boots & Shoes for minors Cl 5.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Toe Cap
MECHANICAL- LEATHER Safety Footwear Clearance
346 Leather safety boots & Shoes for minors Cl 5.7 of IS 3976
AND LEATHER PRODUCTS Under Toe Caps at Impact
MECHANICAL- LEATHER Screw wire brass all
347 Leather Safety boots & Shoes for minors Cl 4.2 of IS 8606
AND LEATHER PRODUCTS dimensions
MECHANICAL- LEATHER
348 Leather Safety boots & Shoes for minors Screw wire brass reverse bend Cl 4.3 of IS 8606
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
349 Leather safety boots & shoes for minors Shanks thickness IS 10945
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
350 Leather safety boots & shoes for minors Shanks width IS 10945
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
351 Leather safety boots & shoes for minors Sole leather water absorption LP-11 of IS 5914
AND LEATHER PRODUCTS
Starting thickness of eyelets
MECHANICAL- LEATHER dimension of stationery
352 Leather safety boots & shoes for minors Table-1 Cl 6.1 of IS 5041
AND LEATHER PRODUCTS eyelets, brass aluminum &
steel
MECHANICAL- LEATHER
353 Leather Safety boots & Shoes for minors Stationery eyelets dimensions Table-2 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
354 Leather safety boots & shoes for minors Steel toe cap dimensions Cl 5.1 IS 5852
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
355 Leather Safety boots & Shoes for minors Steel toe cap impact test Cl 5.1 of IS 5852
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Stitch tear strength , double
356 Leather safety boots & shoes for minors LP-8 of IS 5914
AND LEATHER PRODUCTS hole
MECHANICAL- LEATHER
357 Leather safety boots & shoes for minors Storage sticking IS 13826 (Part-3)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Sulpher Dyes in black colored Appendix - A Cl 8.14 IS
358 Leather Safety Boots & Shoes for minors
AND LEATHER PRODUCTS Laces 1989(P-1)
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 21 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Tape (Cotton NEWAR)
359 Leather safety boots & shoes for minors IS 1954
AND LEATHER PRODUCTS Dimensions width
MECHANICAL- LEATHER Tape (Cotton NEWAR) Mass
360 Leather safety boots & Shoes for minors IS 1964
AND LEATHER PRODUCTS (g/m)
MECHANICAL- LEATHER
361 Leather safety boots & shoes for minors Tape NEWAR width IS 1895
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
362 Leather safety boots & shoes for minors Tearing strength LP-7 IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
363 Leather safety boots & shoes for minors Tensile strength LP-6 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tensile Strength After Ageing
364 Leather Safety boots & shoes for minors IS 3400 (Part-1)
AND LEATHER PRODUCTS at 100°C for 24 hours
MECHANICAL- LEATHER
365 Leather safety boots & shoes for minors Tensile strength before Ageing IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Thickness of various
366 Leather safety boots & shoes for minors Cl 9.1 IS 1989 (Part-1)
AND LEATHER PRODUCTS components
MECHANICAL- LEATHER Threads all varieties normal
367 Leather Safety boots & Shoes for minors Table-1 Cl 3.1 of IS 1720
AND LEATHER PRODUCTS count
MECHANICAL- LEATHER Threads all varieties breaking
368 Leather Safety boots & Shoes for minors Table-1 Cl 3.1 of IS 1720
AND LEATHER PRODUCTS strength single threads
MECHANICAL- LEATHER Threads all varieties for sole
369 Leather Safety boots & Shoes for minors Cl 8.9.2 of IS 1989 (Part-1)
AND LEATHER PRODUCTS stitching construction
MECHANICAL- LEATHER
370 Leather Safety boots & Shoes for minors Threads all varieties length Table-1 Cl 3.1 of IS 1720
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Threads for all varieties
371 Leather Safety boots & Shoes for minors IS 1670
AND LEATHER PRODUCTS breaking strength
MECHANICAL- LEATHER Threads for upper closing
372 Leather safety boots & shoes for minors IS 1670
AND LEATHER PRODUCTS breaking strength
MECHANICAL- LEATHER Tongue lining wollen / flannel
373 Leather safety boots & shoes for minors Cl 8.15 of IS 1989 (Part-1)
AND LEATHER PRODUCTS cloth Mass
MECHANICAL- LEATHER Tongue lining woolen/flannel
374 Leather safety boots & shoes for minors Cl 14.15 of IS 1989 (Part-1)
AND LEATHER PRODUCTS cloth raised mass
MECHANICAL- LEATHER
375 Leather safety boots & shoes for minors Tongue tear strength LP-9 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Upper /Outer Sole Bond
376 Leather safety boots & Shoes for minors Cl 5.3.1.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Strength
MECHANICAL- LEATHER
377 Leather safety boots & shoes for minors Water absorption IS 13826 (Part-6)
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 22 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Water absorption of Sole
378 Leather safety boots & shoes for minors LP-12 of IS 5914
AND LEATHER PRODUCTS leather
MECHANICAL- LEATHER water resistant sole leather
379 Leather safety boots & shoes for minors LP-13 of IS 5914
AND LEATHER PRODUCTS resistance to cracking of grain
MECHANICAL- LEATHER
380 Leather safety boots & shoes for minors Water vapour permeability LP-21 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Abrasion resistance lining
381 Leather safety boots & shoes for minors , Derby Shoes Annex B of IS 3840
AND LEATHER PRODUCTS leather
MECHANICAL- LEATHER Color fastness to rubbing (Dry
382 Leather safety boots & shoes for minors , Derby Shoes LF-9 of IS 6191
AND LEATHER PRODUCTS & Wet)- Lining Leather
MECHANICAL- LEATHER Flexural endurance test of
383 Leather safety boots & shoes for minors , Sports Footwear LP-19 of IS 5914
AND LEATHER PRODUCTS leather
MECHANICAL- LEATHER
384 Leather Safety Boots & Shoes, for Miners Shoes Design Cl 3.3 IS: 5520
AND LEATHER PRODUCTS
components for leather safety
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
385 footwear having moulded Table-3 Cl 5.3.4.2 of IS 14544
AND LEATHER PRODUCTS Type-1 & Type 2
rubber sole thickness
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
386 Cotton NEWAR mass IS 1964
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Cotton NEWAR breaking
387 IS 1969 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type 2 strength
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Cotton NEWAR dimensions
388 IS 1954
AND LEATHER PRODUCTS Type-1 & Type 2 width
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Cotton NEWAR Ends in full
389 IS 1963
AND LEATHER PRODUCTS Type-1 & Type 2 width
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
390 Cotton NEWAR Picks/cm IS 1963
AND LEATHER PRODUCTS Type-1 & Type 2
Cotton sewing threads
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
391 breaking load of all nominal IS 1670
AND LEATHER PRODUCTS Type-1 & Type 2
count
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Cotton sewing threads color
392 IS/ISO 105 E04
AND LEATHER PRODUCTS Type-1 & Type 2 fastness to perspiration count
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Annex B-3 Table-1 Cl 3.1 of IS
393 Cotton sewing threads length
AND LEATHER PRODUCTS Type-1 & Type 2 1720
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Cotton sewing threads length Annex-S-3 Table-1 Cl 3.1 of IS
394
AND LEATHER PRODUCTS Type-1 & Type 2 nominals count 1720
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Direct moulded sole & heel
395 IS 12240 (Part-6)
AND LEATHER PRODUCTS Type-1 & Type 2 Elongation at break %
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 23 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Direct moulded sole & heel
396 IS 12240 (Part-7)
AND LEATHER PRODUCTS Type-1 & Type 2 flexing resistance
Direct moulded sole & heel
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
397 flexing resistance cut growth IS 12240 (Part-7)
AND LEATHER PRODUCTS Type-1 & Type 2
at the end
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Direct moulded sole & heel
398 IS 12240 (Part-2)
AND LEATHER PRODUCTS Type-1 & Type 2 hardness IRHD
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Direct moulded sole & heel
399 IS 12240 (Part-3)
AND LEATHER PRODUCTS Type-1 & Type 2 Relative density
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Direct moulded sole & heel
400 IS 12280 (Part-6)
AND LEATHER PRODUCTS Type-1 & Type 2 tensile strength
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Eyelets footwear Dimensions of Table-1 Cl 3.1,5.11,6.1 of IS
401
AND LEATHER PRODUCTS Type-1 & Type 2 collar diameter 5041
Eyelets footwear dimensions of
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
402 overall length brass, aluminum Table-1 Cl-3.1 of IS 5041
AND LEATHER PRODUCTS Type-1 & Type 2
& steel
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Eyelets footwear dimensions of
403 Table 1 Cl- 3.1 of IS 5041
AND LEATHER PRODUCTS Type-1 & Type 2 under collar diameter
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material area shrinkage Cl-8.1.3 Type-1 & Type-2 of IS
404
AND LEATHER PRODUCTS Type-1 & Type 2 % by mass 5867
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
405 Insole material density LP-5 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material elongation %
406 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 dry condition
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material elongation %
407 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 wet condition
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material flexing
408 Appendix-C of IS 5867
AND LEATHER PRODUCTS Type-1 & Type 2 endurance
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material linear shrinkage
409 Cl-8.1.4 of IS 5867
AND LEATHER PRODUCTS Type-1 & Type 2 % by mass
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material stitch tear
410 Appendix-B of IS 5867
AND LEATHER PRODUCTS Type-1 & Type 2 strength double hole
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material tensile strength
411 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 Dry condition
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material tensile strength
412 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 wet condition
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Insole material water
413 LP-11 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 absorption by mass
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 24 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
414 Iron shanks Dimensions Cl-4.4 of IS 10945
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use breaking
415 IS 1969 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type 2 strength
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use color
416 IS 3361
AND LEATHER PRODUCTS Type-1 & Type 2 fastness washing dyed laces
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use count
417 IS 4778
AND LEATHER PRODUCTS Type-1 & Type 2 yarn
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use
418 IS: 4778
AND LEATHER PRODUCTS Type-1 & Type 2 Ends/spindles
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use flat Annex-A-5 Table-1 of Cl 3.1 of
419
AND LEATHER PRODUCTS Type-1 & Type 2 width IS 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use gripping Annex-A-4 Table-1 Cl-3.1 of IS
420
AND LEATHER PRODUCTS Type-1 & Type 2 resistance metallic tags 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Annex-A-2 Table-1 Cl 3.1 of IS
421 Laces for defence use length
AND LEATHER PRODUCTS Type-1 & Type 2 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use mass Annex-A-6 Table -1 Cl 3.1 of IS
422
AND LEATHER PRODUCTS Type-1 & Type 2 per pair 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use slip Annex-A-3 Table-1 Cl-3.1 of IS
423
AND LEATHER PRODUCTS Type-1 & Type 2 resistance 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for defence use total
424 Cl 5.2.9 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type 2 number of ends
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for general use breaking
425 IS 1969 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type 2 strength
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for general use color
426 IS/ISO 105 C-10
AND LEATHER PRODUCTS Type-1 & Type 2 fastness washing
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for general use gripping Annex-A-4 Table-1 Cl-3.1 of IS
427
AND LEATHER PRODUCTS Type-1 & Type 2 resistance metallic tags 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Annex-A- Table-1 Cl 3.1 of IS
428 Laces for general use length
AND LEATHER PRODUCTS Type-1 & Type 2 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Laces for general use slip Annex-A-3 Table-1 Cl-3.1 of IS
429
AND LEATHER PRODUCTS Type-1 & Type 2 resistance 4778
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Lining leather Abrasion Annex-B Table-1 Cl 5.4 of IS
430
AND LEATHER PRODUCTS Type-1 & Type 2 resistance Dry & Wet 3840
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Lining leather color fastness Annex-A Table-1 Cl 5.4 of IS
431
AND LEATHER PRODUCTS Type-1 & Type 2 perspiration grey scale 3840:
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Lining leather color fastness
432 LF-9 of IS 6191
AND LEATHER PRODUCTS Type-1 & Type 2 rubbing dry & wet
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 25 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Lining leather stitch tear
433 LP-8 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 strength double hole
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
434 Lining leather tensile strength LP-6 of 5914
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
435 Lining leather tensile strength LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
436 lining leather thickness LP-1 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Lining leather tongue tear
437 LP-9 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 strength
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Lining leather water vapour
438 LP-21 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 permeability
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
439 Mass of boots per pair (Type-1) Cl 5.5.1 of IS 14544
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
440 Mass of shoes per pair (type-2) Cl 5.5.2 of IS 14544
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
441 Mass of shoes per pair (type-3) Cl 5.5.3 of IS 14544
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Mild steel rust proof lasting
442 Cl-5.2.6.1 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type 2 tacks length dimensions
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Moulded bottom adhesion test
443 Annex-E Cl-5.7 of IS 14544
AND LEATHER PRODUCTS Type-1 & Type 2 for bottom from upper & toe
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Performance test for safety
444 Annex-D Cl 5.6 of IS 14544
AND LEATHER PRODUCTS Type-1 & Type 2 boots & shoes Impact test
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Sewing threads washing color
445 IS/ISO 105-C10
AND LEATHER PRODUCTS Type-1 & Type 2 fastness to washing
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Steel toe cap (type-2)
446 Table-1 Cl-5.1 of IS 5852
AND LEATHER PRODUCTS Type-1 & Type 2 Dimension
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Steel toe cap (type-2) impect
447 Table-1 Cl-5.1 of IS 5852
AND LEATHER PRODUCTS Type-1 & Type 2 test
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather color fastness to
448 LF-10 of IS 6191
AND LEATHER PRODUCTS Type-1 & Type 2 rubbing dry & wet
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather distension &
449 LP-13 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 strength gain extensions
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather distension &
450 LP-13 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 strength of brust
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather distension &
451 LP-13 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 strength of crack
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 26 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather elongation at
452 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 break
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather flexural
453 LP-19 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 endurance
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Appendix-A table-1 Cl 3.5 of IS
454 Upper leather heat resistance
AND LEATHER PRODUCTS Type-1 & Type 2 5677
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather stitch tear
455 LP-8 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 strength
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
456 Upper leather tensile strength LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole
457 Upper leather thickness LP-1 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2
MECHANICAL- LEATHER Leather Safety Footwear with Direct Moulded PVC Sole Upper leather tongue tear
458 LP-9 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type 2 resistance
Rubber sole & heel oil
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
459 resistance properties flexing IS 3400 (Part-16)
AND LEATHER PRODUCTS Type-1 & Type-2
resistance initial crack
Components for leather safety
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
460 footwear having moulded Table-3 Cl-5.35.4.2 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type-2
rubber sole Thickness
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Cotton NEWAR breaking
461 IS 1969 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type-2 strength
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole cotton NEWAR dimensions
462 IS 1954
AND LEATHER PRODUCTS Type-1 & Type-2 width
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole cotton NEWAR Ends in full
463 IS 1963:
AND LEATHER PRODUCTS Type-1 & Type-2 width
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
464 Cotton NEWAR mass IS 1964
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
465 Cotton NEWAR Picks IS 1963
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Cotton sewing threads
466 Table-1 Cl-3.1 of IS 1720
AND LEATHER PRODUCTS Type-1 & Type-2 breaking load
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Cotton Sewing threads color
467 IS/ISO 105-10
AND LEATHER PRODUCTS Type-1 & Type-2 fastness to washing
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Cotton Sewing Threads Length Annexure B-3 Table 1, Cl-3.1 of
468
AND LEATHER PRODUCTS Type-1 & Type-2 of all nominal length counts IS 1720
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Cotton sewing threads Length Annexure B-3 Table 1, Cl 3.1 of
469
AND LEATHER PRODUCTS Type-1 & Type-2 of all nominal tex 1720
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 27 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Direct moulded sole & heel
470 IS 3400 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type-2 change Elongation after ageing
Direct moulded sole & heel
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
471 change in Initial hardness IS 3400 (Part-2)
AND LEATHER PRODUCTS Type-1 & Type-2
Shore-A after Ageing
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Direct moulded sole & heel
472 IS 3400 (Part-16)
AND LEATHER PRODUCTS Type-1 & Type-2 Flexing resistance
Direct moulded sole & heel
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
473 flexing resistance cut growth IS 3400 (Part-16)
AND LEATHER PRODUCTS Type-1 & Type-2
at the end
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Direct moulded sole & heel
474 IS 3400 (Part-2)
AND LEATHER PRODUCTS Type-1 & Type-2 hardness Shore-A
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Direct moulded sole & Heel
475 IS 3400 (Part-9)
AND LEATHER PRODUCTS Type-1 & Type-2 relative density
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Direct moulded sole & heel
476 IS 3400 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type-2 Tensile strength
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Eyelets footwear dimension of
477 Table-1 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS Type-1 & Type-2 overall height
Eyelets footwear Dimensions of
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Table-1 Cl 3.1,5.11, 6.1 of IS
478 collar diameter Brass ,
AND LEATHER PRODUCTS Type-1 & Type-2 5041:
Aluminum & steel
Eyelets footwear dimensions of
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
479 under collar diameter brass , Table-1 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS Type-1 & Type-2
aluminum & steel
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Eyelets footwear starting
480 Table-1 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS Type-1 & Type-2 thickness
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material Area shrinkage
481 Table-1 Cl 4.6 of IS 5867
AND LEATHER PRODUCTS Type-1 & Type-2 % by mass
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
482 Insole material density LP-5 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material Elongation dry
483 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 condtion
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material Elongation wet
484 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 condition
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material flexing Annex-C, Table-1 Cl 4.6 of
485
AND LEATHER PRODUCTS Type-1 & Type-2 endurance 5867
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material linear shrinkage
486 Cl 8.14 of IS 5867
AND LEATHER PRODUCTS Type-1 & Type-2 % by mass
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 28 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material stitch tear
487 Annex-B Table-1 of IS 5867
AND LEATHER PRODUCTS Type-1 & Type-2 strength double hole
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole insole material tensile strength
488 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 dry condition
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Insole material tensile strength
489 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 wet condition
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole insole material water
490 LP-11 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 absorption % by mass
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
491 Iron shanks length Cl 4.4 of IS 10945
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
492 Iron shanks thickness Cl 4.4 of IS 10945
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
493 Iron shanks thickness Cl- 4.4 of IS 10945
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use breaking
494 IS 1969 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type-2 strength
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use color
495 IS/ISO 105-C10
AND LEATHER PRODUCTS Type-1 & Type-2 fastness washing dyed laces
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use count of
496 A-6 Table-2 of IS: 4778
AND LEATHER PRODUCTS Type-1 & Type-2 yarn
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use
497 A-6 Table 2 of IS : 4778
AND LEATHER PRODUCTS Type-1 & Type-2 Ends/Spindles
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use flat Annexure-A-5 Table-1 Cl 3.1 of
498
AND LEATHER PRODUCTS Type-1 & Type-2 width IS 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use gripping Annexure-A-4 Table-1 Cl 3.1 of
499
AND LEATHER PRODUCTS Type-1 & Type-2 resistance metallic tags IS 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Annexure -A-2 Table-1 of IS
500 Laces for defence use length
AND LEATHER PRODUCTS Type-1 & Type-2 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use mass Annexure-A-6 Table-1 Cl-3.1 of
501
AND LEATHER PRODUCTS Type-1 & Type-2 per pair IS 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use slip Annexure-A-3 Table-1 Cl-3.1 of
502
AND LEATHER PRODUCTS Type-1 & Type-2 resistance IS 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for defence use total
503 A-6 Table-2 of IS 4778
AND LEATHER PRODUCTS Type-1 & Type-2 number of ends
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for general use breaking
504 IS 1969 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type-2 strength
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for general use color
505 IS/ ISO 150-C10
AND LEATHER PRODUCTS Type-1 & Type-2 fastness washing dyed laces
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 29 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for general use gripping Annexure-A-4 table-1 of IS
506
AND LEATHER PRODUCTS Type-1 & Type-2 resistance metalic tags 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Annexure-A-2 Table-1 Cl 3.1 of
507 Laces for general use length
AND LEATHER PRODUCTS Type-1 & Type-2 IS 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Laces for general use slip Annexure-A-3 Table-1 Cl 3.1 of
508
AND LEATHER PRODUCTS Type-1 & Type-2 resistance IS 4778
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Lining leather Abrasion
509 Annexure- B Cl 5.4 of IS 3840
AND LEATHER PRODUCTS Type-1 & Type-2 resistance dry & wet
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Lining leather color fasness Annexure-A, Table 1, Cl-5.4 of
510
AND LEATHER PRODUCTS Type-1 & Type-2 perspiration grey scale IS 3840
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Lining leather color fastness
511 LF-9 IS 6191
AND LEATHER PRODUCTS Type-1 & Type-2 rubbing dry & wet
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Lining leather stiotch tear
512 LP-8 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 strength double hole
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
513 Lining leather tensile strength LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
514 Lining leather thickness LP-1 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Lining leather water vapour
515 LP-21 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 permeability
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
516 Mass of boots per pair type-1 Cl 5.5.1 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
517 Mass of shoes per pair type-2 Cl-5.5.2 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
518 Mass of shoes per pair type-3 Cl-5.5.3 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Mild steel rust proof lasting
519 Cl-5.2.6.1 of 11226
AND LEATHER PRODUCTS Type-1 & Type-2 tacks Dimensions
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Moulded bottom adhesion test Annexure-E Cl-5.7.2 of IS
520
AND LEATHER PRODUCTS Type-1 & Type-2 for bottom from upper & toe 11226
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Performance test for safety
521 Annexure-D Cl-5.6 of IS 11226
AND LEATHER PRODUCTS Type-1 & Type-2 boots & shoes Impact test
Rubber sole & heel oil
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
522 resistance properties change in IS 3400 (Part-2)
AND LEATHER PRODUCTS Type-1 & Type-2
hardness Shore-A afterr ageing
Rubber sole & heel oil
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
523 resistance properties change in IS 3400 (Part-9)
AND LEATHER PRODUCTS Type-1 & Type-2
relative Density after Ageing
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 30 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Rubber sole & heel oil
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
524 resistance properties change in IS 3400 (Part-1)
AND LEATHER PRODUCTS Type-1 & Type-2
tensile strength after Ageing
Rubber sole & heel oil
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole resistance properties flexing
525 IS 3400 (Part-16)
AND LEATHER PRODUCTS Type-1 & Type-2 resistance initial cut growth
after end
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Steel Toe cap (Type-2) Impact
526 Table-1 Cl-5.1 of IS 5852
AND LEATHER PRODUCTS Type-1 & Type-2 test
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Steet toe cap (Type-2)
527 Table-1 Cl 5.1 of IS 5852
AND LEATHER PRODUCTS Type-1 & Type-2 Dimensions
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather color fastness to
528 LF-10 of IS 6191
AND LEATHER PRODUCTS Type-1 & Type-2 rubbing dry & wet
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather Distension &
529 LP-13 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 strength of busting
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather Distension &
530 LP-13 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 strength of cracking
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather Elongation at
531 LP-6 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 break %
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather Flexural
532 LP-19 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 Endurance
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Annex -A, Table-1 Cl 3.5 of IS
533 Upper leather heat resistance
AND LEATHER PRODUCTS Type-1 & Type-2 5677
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather stitch tear
534 LP-8 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 strength
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
535 Upper leather tensile strength LP-6 of IS 5914 of
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole
536 Upper leather thickness LP-1 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2
MECHANICAL- LEATHER Leather safety footwear with direct moulded rubber sole Upper leather tongue tear
537 LP-9 of IS 5914
AND LEATHER PRODUCTS Type-1 & Type-2 resistance
MECHANICAL- LEATHER Change in initial hardness IRHD IS 3400 (Part-4) & IS 3400
538 Moulded solid rubber soles and heels Type-1 & Type-2
AND LEATHER PRODUCTS after ageing (Part-1)
MECHANICAL- LEATHER Change in tensile strength
539 Moulded solid rubber soles and heels Type-1 & Type-2 IS 3400 (Part-1)
AND LEATHER PRODUCTS after Ageing
MECHANICAL- LEATHER
540 Moulded solid rubber soles and heels Type-1 & Type-2 Channels Denth & width Cl 5.5 of IS 5676
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Cut growth at the end of
541 Moulded solid rubber soles and heels Type-1 & Type-2 IS 3400 (Part-16)
AND LEATHER PRODUCTS 150.000 cycle
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 31 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
542 Moulded solid rubber soles and heels Type-1 & Type-2 Elongation at break , Percent IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
543 Moulded solid rubber soles and heels Type-1 & Type-2 Hardness(IRHD) IS 3400 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Number of cycles for initial
544 Moulded solid rubber soles and heels Type-1 & Type-2 IS 3400 (Part-16)
AND LEATHER PRODUCTS crack 60,000 cycle
Physical requirement for soles
MECHANICAL- LEATHER
545 Moulded solid rubber soles and heels Type-1 & Type-2 & heels change in elongation IS 3400 (Part-1)
AND LEATHER PRODUCTS
after Ageing
MECHANICAL- LEATHER
546 Moulded solid rubber soles and heels Type-1 & Type-2 Relative density IS 3400 (Part-9)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Sole & heels compression set
547 Moulded solid rubber soles and heels Type-1 & Type-2 IS 3400 (Part-10)
AND LEATHER PRODUCTS %
MECHANICAL- LEATHER
548 Moulded solid rubber soles and heels Type-1 & Type-2 Tensile strength IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
549 Moulded solid rubber soles and heels Type-1 & Type-2 Thickness of heel without cleat Table-1,Cl 5.5 of IS 5676
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
550 Moulded solid rubber soles and heels Type-1 & Type-2 Thickness of heels with cleat Table-1,Cl 5.5 of IS 5676
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Thickness of soles and heels
551 Moulded solid rubber soles and heels Type-1 & Type-2 Table-1,Cl 5.5 of IS 5676
AND LEATHER PRODUCTS sole at waist with cleat
MECHANICAL- LEATHER Thickness of soles and heels
552 Moulded solid rubber soles and heels Type-1 & Type-2 Table-1,Cl 5.5 of IS 5676
AND LEATHER PRODUCTS sole footpart at tread with cleat
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
553 Abrasion resistance Insocks Cl 6.12 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
554 Abrasion resistance insole Cl 7.3 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Electrical resistance of
555 Cl 5.13 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Antistatic footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Electrical resistance of
556 Cl 5.13 EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Conductive footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Energy adsorption of seat
557 Cl 5.17 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear region
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
558 Flexing resistance of Outsole Cl 8.6 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Outsole thickness of Non-
559 Cl 8.2.3 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Cleated outsole
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 32 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Perforation resistance inserts
560 Cl 5.8 Of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear dimensions -Whole Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
561 Resistance oF fuel oil Cl 8.8 of ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Resistance to cutting -Whole
562 Cl 5.23 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Resistance to hot contact of
563 Cl 8.9 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Outsole Rubber and polymric
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
564 Slip Resistance ISO 13287
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
565 Sole complex cold insulation Cl 5.16 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
566 Sole complex heat insulation Cl 5.15 of IS EN- ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
567 Tensile strength of leather split Cl 7.2 ISO 3376
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water absorption of
568 Cl 7.2 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Insole/Insock
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water desorption of
569 Cl 7.2 of IS EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear insole/insock
Flexing resistance of
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
570 perforation-resistance metallic ISO 22568 (Part-3)
AND LEATHER PRODUCTS Footwear, Occupational Footwear
insert
Flexing resistance of
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
571 perforation-resistance Non- Cl 5.2 of ISO 22568 (Part-4)
AND LEATHER PRODUCTS Footwear, Occupational Footwear
metallic insert
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
572 Impact resistance ISO 22568
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Non leather Abrasion
573 Method A ISO 4649
AND LEATHER PRODUCTS Footwear, Occupational Footwear Resistance-Outsole
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
574 Outsole Tear Strength ISO 34-1
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
575 Perforation resistant insert Cl 5.8.2 ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Resistance to fuel oil (Increase
576 ISO 868
AND LEATHER PRODUCTS Footwear, Occupational Footwear in hardness)
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
577 Resistance to fuel oil of Outsole Cl 8.3 ISO 1817
AND LEATHER PRODUCTS Footwear, Occupational Footwear
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 33 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Resistance to water for whole
578 Cl 5.18 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear footwear
Shock absorption capacity of
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
579 ankle protection material- Cl 5.22 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
upper
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water penetration -whole
580 Cl 6.13 of ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
581 Leak proofness test Cl 5.7 of ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
582 Insole/Insocks thickness Cl 7.1 EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water vapour coefficient of
583 Cl 6.8 EN ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear vamp and quarter lining
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Abrasion Resistance of Vamp &
584 Cl 6.12 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Quarter lining
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
585 Breaking force of Rubber Cl 6.4.2.2 EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
586 Ergonomic Feature Cl 5.1 of ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
587 Hydrolyses of upper Material Annex B ISO 5423
AND LEATHER PRODUCTS Footwear, Occupational Footwear
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Modulus at 100% Elongation of
588 Cl 5.3 ISO 4643
AND LEATHER PRODUCTS Footwear, Occupational Footwear polymeric
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Upper Flexing resistance of
589 Cl 6.5.2.2 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Rubber
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Upper Thickness of
590 Cl 5.1 ISO 23529
AND LEATHER PRODUCTS Footwear, Occupational Footwear Rubber/Polymer
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water vapour coefficient of
591 Cl 6.8 of EN-ISO 20344
AND LEATHER PRODUCTS Footwear, Occupational Footwear Upper Material
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear , Protective Corrosion resistance test of
592 Cl 5.1 of ISO 12568
AND LEATHER PRODUCTS Footwear Non-Metallic toecaps
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Tongue Tear strength of coated
593 ISO 4674 (Part-1)
AND LEATHER PRODUCTS Footwear, Occupational Footwear fabric & textile
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Tongue Tear strength of
594 ISO 3377 (Part-2)
AND LEATHER PRODUCTS Footwear, Occupational Footwear leather
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water vapour permeability of
595 Cl 7 ISO 14268
AND LEATHER PRODUCTS Footwear, Occupational Footwear vamp and quarter lining
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 34 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Tear strength of coated fabric
596 ISO 4674 (Part-1)
AND LEATHER PRODUCTS Footwear, Occupational Footwear & textile
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
597 Tear strength of leather ISO 3377 (Part-2)
AND LEATHER PRODUCTS Footwear, Occupational Footwear
Tear Strength of Vamp &
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective
598 Quarter lining -coated fabric & ISO 4674 (Part-1)
AND LEATHER PRODUCTS Footwear, Occupational Footwear
textile
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Tear Strength of Vamp &
599 ISO 3377 (Part-2)
AND LEATHER PRODUCTS Footwear, Occupational Footwear quarter lining -leather
MECHANICAL- LEATHER Personal Protective Equipment Safety Footwear, Protective Water vapour permeability of
600 Cl 7 ISO 14268
AND LEATHER PRODUCTS Footwear, Occupational Footwear Upper material
MECHANICAL- LEATHER Personal Protective Equipment - Safety Footwear ,
601 Height of upper Cl 6.2 ISO 20344
AND LEATHER PRODUCTS Occupational Footwear, Protective Footwear
MECHANICAL- LEATHER Personal Protective Equipment - Safety Footwear , Bond Strength of
602 Cl 5.2 of ISO 20344
AND LEATHER PRODUCTS Occupational Footwear, Protective Footwear Upper/Outsole and Interlayer
MECHANICAL- LEATHER Personal Protective Equipment - Safety Footwear , Compression resistance of toe
603 Cl 5.4 of ISO 20344
AND LEATHER PRODUCTS Protective Footwear caps
MECHANICAL- LEATHER Personal Protective Equipment - Safety Footwear ,
604 Impect Resistance of Toe Caps Cl 5.4 of ISO 20344
AND LEATHER PRODUCTS Protective Footwear
MECHANICAL- LEATHER Personal Protective Equipment - Safety Footwear, Corrosion resistance of Metallic
605 Cl 5.6.2.1 ISO 20344
AND LEATHER PRODUCTS Protective Footwear Toecaps
MECHANICAL- LEATHER Personal Protective Equipment - Safety Footwear , Internal Metallic Toe Cap
606 Cl 5.2.1 of ISO 22568 (Part-1)
AND LEATHER PRODUCTS Protective Footwear Length
MECHANICAL- LEATHER
607 Polyurethane sole semi rigid Abrasion Resistance Annex-B Cl 4.3.1 of IS 13893
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
608 Polyurethane sole semi rigid Ageing test IS 3400 (Part-4)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
609 Polyurethane sole semi rigid Elongation at break IS 12240 (Part-6)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Flexural strength cut growth
610 Polyurethane sole semi rigid IS 12240 (Part-7)
AND LEATHER PRODUCTS min
MECHANICAL- LEATHER
611 Polyurethane sole semi rigid Flexural Strength no of cycle IS 12240 (Part-7)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
612 Polyurethane sole semi rigid Hardness Shore A IS 12240 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
613 Polyurethane sole semi rigid Relative density IS 12240 (Part-3)
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 35 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
614 Polyurethane sole semi rigid Tensile Strength IS 12240 (Part-6)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
615 Polyurethane sole semi rigid Thickness of sole Cl 4.1 of IS 12240 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
616 PVC Industrial Boots Color fastness to washing IS/ISO 105-C10
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
617 PVC Industrial Boots Elongation break IS 12240 (Part-6)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Eyelets Dimensions of collar
618 PVC Industrial Boots Table-1 Column 3.1 of IS 5041
AND LEATHER PRODUCTS Diameter
MECHANICAL- LEATHER Eyelets Dimensions of under
619 PVC Industrial Boots Table-1, Cl 3.1 of IS 5041
AND LEATHER PRODUCTS collar diameter
MECHANICAL- LEATHER
620 PVC Industrial Boots Eyelets overall height Table-1, Cl 3.1 of IS 5041
AND LEATHER PRODUCTS
Eyelets starting thickness of
MECHANICAL- LEATHER
621 PVC Industrial Boots brass aluminum and brass IS 5041
AND LEATHER PRODUCTS
aluminum and steel eyelets
MECHANICAL- LEATHER
622 PVC Industrial Boots Flexing test IS 12240 (Part-8)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
623 PVC Industrial Boots Laces breaking strength IS 1969 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
624 PVC Industrial Boots Laces gripping strength IS 4778
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
625 PVC Industrial Boots Laces length IS 4478
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
626 PVC Industrial Boots Laces slip resistance A-3 of IS 4478
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
627 PVC Industrial Boots Leakage resistance Cl 5.2 of IS 12254
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
628 PVC Industrial Boots Leg height of ankle IS 12254
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
629 PVC Industrial Boots leg height of half knee IS 12254
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
630 PVC Industrial Boots Leg height of knee Cl 5.11 of IS 12254
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
631 PVC Industrial Boots Leg height of Thigh Cl 5.11 of IS 12254
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 36 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Natural/Synthetic fabric lined
MECHANICAL- LEATHER
632 PVC Industrial Boots boots Breaking strength warp IS 1969 (Part-1)
AND LEATHER PRODUCTS
way
Natural/Synthetic fabric lined
MECHANICAL- LEATHER
633 PVC Industrial Boots boots breaking strength weft IS 1969 (Part-1)
AND LEATHER PRODUCTS
way
MECHANICAL- LEATHER
634 PVC Industrial Boots PVC compound relative density IS 12240 (Part-3)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER PVC compound hardness
635 PVC Industrial Boots IS 12240 (Part-2)
AND LEATHER PRODUCTS Shore-A upper
MECHANICAL- LEATHER PVC compound hardness Sole
636 PVC Industrial Boots Cl 4.3 of 12254
AND LEATHER PRODUCTS & heel
MECHANICAL- LEATHER Resistance to cut growth sole
637 PVC Industrial Boots IS 12240 (Part-7)
AND LEATHER PRODUCTS flexing test
MECHANICAL- LEATHER Steel toe cap dimensions Type
638 PVC Industrial Boots Cl 4.3 of IS 12254
AND LEATHER PRODUCTS 2 for all sizes
MECHANICAL- LEATHER Steel toe cap impact test Annex-A Cl 5.2 Table 1 of IS
639 PVC Industrial Boots
AND LEATHER PRODUCTS clearance 5852
MECHANICAL- LEATHER Stress at 100% elongation
640 PVC Industrial Boots IS 12240 (Part-6)
AND LEATHER PRODUCTS upper
MECHANICAL- LEATHER
641 PVC Industrial Boots Thickness of PVC compound IS 12240 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Annex-A3 Table-1 Cl 4.1 of IS
642 PVC Sandal Type-1 & Type 2 Elongation at break %
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Annex-A2 Table-1 Cl 4.1 of IS
643 PVC Sandal Type-1 & Type 2 IRHD hardness
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Annex-A-1 Table-1 Cl 4.1 of IS
644 PVC Sandal Type-1 & Type 2 Relative Density
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Annex-A4 Table-1 Cl 4.1 of IS
645 PVC Sandal Type-1 & Type 2 Tear strength back part
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Annex- A4 Table-1 Cl 4.1 of IS
646 PVC Sandal Type-1 & Type 2 Tear strength fore part
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Annex-A 3 Table- 1 Cl 4.1 of IS
647 PVC Sandal Type-1 & Type 2 Tensile Strength
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Annex- A5 Table-1 Cl 4.1 of IS
648 PVC Sandal Type-1 & Type 2 Volatility %
AND LEATHER PRODUCTS 6721
MECHANICAL- LEATHER Bottom material compression
649 Rubber Hawai Chappal Annex-D of IS 6664
AND LEATHER PRODUCTS set at constant stress
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 37 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Annexure-C Table-2 & 3 Cl 5.4
650 Rubber Hawai Chappal Bottom material hardness
AND LEATHER PRODUCTS of IS 10702
MECHANICAL- LEATHER Bottom material room temp Annex-F Table-2 & 3 Cl 5.4 of
651 Rubber Hawai Chappal
AND LEATHER PRODUCTS shrinkage IS 10702
MECHANICAL- LEATHER Annex-G Table-2 & 3 Cl 5.4 of
652 Rubber Hawai Chappal Bottom material shrinkage
AND LEATHER PRODUCTS IS 10702
MECHANICAL- LEATHER Bottom material split tear Annex-E Table-2 & 3 Cl 5.4 of
653 Rubber Hawai Chappal
AND LEATHER PRODUCTS strength IS 10702
Sole thickness from size 3 to 6
MECHANICAL- LEATHER
654 Rubber Hawai Chappal children & from 1 to 6 adults 7 Table-1 Cl 5.3.2 of IS 10702
AND LEATHER PRODUCTS
to 13 for both of toe and heel
MECHANICAL- LEATHER Strap rubber for both type Stud
655 Rubber Hawai Chappal Table-3 Cl 5.4 of IS 10702
AND LEATHER PRODUCTS bolt Diameter
MECHANICAL- LEATHER Strap rubber for both type stud
656 Rubber Hawai Chappal Table-3 Cl 5.4 of IS 10702
AND LEATHER PRODUCTS bolt thickness
MECHANICAL- LEATHER Strap rubber for both type stud
657 Rubber Hawai Chappal Table-2 & 3 Cl 5.4 of IS 10702
AND LEATHER PRODUCTS Diameter
MECHANICAL- LEATHER Strap rubber for both types Annex-H Table-2 & 3 Cl 5.4 of
658 Rubber Hawai Chappal
AND LEATHER PRODUCTS Breaking strength IS 10702
Strap rubber for both types
MECHANICAL- LEATHER
659 Rubber Hawai Chappal change i9n initial Hardness IS 3400 (Part-2)
AND LEATHER PRODUCTS
after accelerated Ageing
MECHANICAL- LEATHER Strap rubber for both types
660 Rubber Hawai Chappal IS 3400 (Part-12)
AND LEATHER PRODUCTS tear strength
MECHANICAL- LEATHER
661 Rubber Hawai Chappal Strap rubber tensile strength IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
662 Rubber Hawai Chappal Strap rubber type Elongation IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Change in hardness Shore-A Annex:C Table-1 Cl 4.1.3 of IS
663 Rubber Microcellular Sheets for Sole & Heel
AND LEATHER PRODUCTS After Ageing at 24hrs 6664
MECHANICAL- LEATHER Compression set at constant Annex D, Table-1 Cl 4.1.3 of IS
664 Rubber Microcellular Sheets for Sole & Heel
AND LEATHER PRODUCTS mass 6664
MECHANICAL- LEATHER
665 Rubber Microcellular Sheets for Sole & Heel Flexing resistance, cut growth IS 3400 (Part-6)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Flexing resistance, Initial
666 Rubber Microcellular Sheets for Sole & Heel IS 3400 (Part-6)
AND LEATHER PRODUCTS cracks
MECHANICAL- LEATHER Annex B Table-1 Cl 4.1.3 of IS
667 Rubber Microcellular Sheets for Sole & Heel Hardness Shore A
AND LEATHER PRODUCTS 6664
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 38 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Annex G Table-1 Cl 4.1.3 of IS
668 Rubber Microcellular Sheets for Sole & Heel Heat shrinkage %
AND LEATHER PRODUCTS 6664
MECHANICAL- LEATHER
669 Rubber Microcellular Sheets for Sole & Heel Joint Girth Table-1&2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
670 Rubber Microcellular Sheets for Sole & Heel joint girth Table-1&2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
671 Rubber Microcellular Sheets for Sole & Heel Length of foot Table 1&2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
672 Rubber Microcellular Sheets for Sole & Heel Length of last Table- 1&2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Annex A Table-1 Cl 4.1.3 of IS
673 Rubber Microcellular Sheets for Sole & Heel Relative density
AND LEATHER PRODUCTS 6664
MECHANICAL- LEATHER Annex A Table-1 Cl 4.1.3 of IS
674 Rubber Microcellular Sheets for Sole & Heel Shrinkage at room temp
AND LEATHER PRODUCTS 6664
MECHANICAL- LEATHER Annex E Table-1 Cl 4.1.3 of IS
675 Rubber Microcellular Sheets for Sole & Heel Split tear strength
AND LEATHER PRODUCTS 6664
MECHANICAL- LEATHER Annex H Table-1 Cl 4.3.1 of IS
676 Rubber Microcellular Sheets for Sole & Heel Water Absorption %
AND LEATHER PRODUCTS 6664
MECHANICAL- LEATHER
677 Rubber Microcellular Sheets for Sole & Heel Width of Insole at the joint Table-1&2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
678 Rubber Microcellular Sheets for Sole & Heel Width of insole of heel Table-1&2 of IS 1638
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
679 Safety Boots & shoes for heavy metal Industries Abrasion resistance Annex-B of IS 3840
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
680 Safety Boots & shoes for heavy metal Industries All Dimensions Diameter Cl 4.2 of IS 8606
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
681 Safety Boots & shoes for heavy metal Industries Apparent Density LP-5 of 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Bitumen (FELT) storage
682 Safety Boots & shoes for heavy metal Industries IS 13826 (Part-3)
AND LEATHER PRODUCTS stitching
MECHANICAL- LEATHER Bitumen (FELT) Type 1, 2,3
683 Safety Boots & shoes for heavy metal Industries IS 13826 (Part-2)
AND LEATHER PRODUCTS Pliability
MECHANICAL- LEATHER Bitumen (FELT) Type 1,2 & 3
684 Safety Boots & shoes for heavy metal Industries IS 13826 (Part-1)
AND LEATHER PRODUCTS Breaking load Weft
MECHANICAL- LEATHER Bitumen (FELT) type 1,2 & 3
685 Safety Boots & shoes for heavy metal Industries IS 13826 (Part-1)
AND LEATHER PRODUCTS Breaking Strength warp way
MECHANICAL- LEATHER Bitumen (FELT) Type 2 Heat
686 Safety Boots & shoes for heavy metal Industries IS 13826
AND LEATHER PRODUCTS resistance
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 39 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Bitumen (FELT) Type 2
687 Safety Boots & shoes for heavy metal Industries IS 13826 (Part-4)
AND LEATHER PRODUCTS pressure head test
MECHANICAL- LEATHER Bitumen (FELT) Type-2 water
688 Safety Boots & shoes for heavy metal Industries IS 13826 (Part-6)
AND LEATHER PRODUCTS Absorption
MECHANICAL- LEATHER Bottom material Abrasion
689 Safety Boots & shoes for heavy metal Industries Annex-A of IS 579
AND LEATHER PRODUCTS Resistance
MECHANICAL- LEATHER Bottom material grain crack
690 Safety Boots & shoes for heavy metal Industries LP-13 of IS 5914
AND LEATHER PRODUCTS index
MECHANICAL- LEATHER Bottom material water
691 Safety Boots & shoes for heavy metal Industries LP-12 of 5914
AND LEATHER PRODUCTS absorption
MECHANICAL- LEATHER Brass screw wire performance
692 Safety Boots & shoes for heavy metal Industries Cl 4.5.1 of IS 8606
AND LEATHER PRODUCTS test
Chromeretan upper leather ,
microcellular rubber sole
prevulcanised natural and
MECHANICAL- LEATHER
693 Safety Boots & shoes for heavy metal Industries synthetic rubber combination Table-1 Cl 2.2.1 of IS 4663
AND LEATHER PRODUCTS
mid sole and microcellular
rubber midsole, component-A
thickness
color fastness to rubbing
MECHANICAL- LEATHER
694 Safety Boots & shoes for heavy metal Industries contrast grading after 1024 LF-9 of IS 6191
AND LEATHER PRODUCTS
revolutions
MECHANICAL- LEATHER
695 Safety Boots & shoes for heavy metal Industries crackness of grain LF-13 of IS 5919
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
696 Safety Boots & shoes for heavy metal Industries Design Appendix-A of IS 5520
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Double Hole Stitch tear
697 Safety Boots & shoes for heavy metal Industries LP-8 of IS 5914
AND LEATHER PRODUCTS strength
MECHANICAL- LEATHER Eyelets Dimensions collar
698 Safety Boots & shoes for heavy metal Industries Cl 3.1 of IS 5041
AND LEATHER PRODUCTS Diameter
MECHANICAL- LEATHER Eyelets Dimensions footwear
699 Safety Boots & shoes for heavy metal Industries Table-1 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS overall height
MECHANICAL- LEATHER Eyelets Dimensions Footwear
700 Safety Boots & shoes for heavy metal Industries Cl 3.1 of IS 5041
AND LEATHER PRODUCTS under collar Diameter
MECHANICAL- LEATHER
701 Safety Boots & shoes for heavy metal Industries Flexural endurance LP-19 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
702 Safety Boots & shoes for heavy metal Industries Laces breaking strength IS 1969 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
703 Safety Boots & shoes for heavy metal Industries Laces length Cl 3.1 of IS 1989 (Part-2)
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 40 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
704 Safety Boots & shoes for heavy metal Industries Lining leather thickness LP-1 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
705 Safety Boots & shoes for heavy metal Industries Rivots length Cl 8.10 of IS 1989 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
706 Safety Boots & shoes for heavy metal Industries screw wire brass reverse bend Cl 4.3.1 of IS 8606
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Sole leather resistance to
707 Safety Boots & shoes for heavy metal Industries LP-13 of IS 5914
AND LEATHER PRODUCTS cracking
MECHANICAL- LEATHER
708 Safety Boots & shoes for heavy metal Industries Starting thickness Table-1 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Stationery eyelets dimensions
709 Safety Boots & shoes for heavy metal Industries Table-2 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS collar diameter
MECHANICAL- LEATHER Stationery eyelets Dimensions
710 Safety Boots & shoes for heavy metal Industries Table-2 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS overall height
MECHANICAL- LEATHER Stationery eyelets Dimensions
711 Safety Boots & shoes for heavy metal Industries Table-2 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS starting thickness
MECHANICAL- LEATHER Stationery eyelets Dimensions
712 Safety Boots & shoes for heavy metal Industries Table-2 Cl 3.1 of IS 5041
AND LEATHER PRODUCTS under collar diameter
MECHANICAL- LEATHER Steel toe cap dimensions
713 Safety Boots & shoes for heavy metal Industries Cl 5.1 of IS 5852
AND LEATHER PRODUCTS impact test
MECHANICAL- LEATHER Tape COTTON NEWAR Breaking
714 Safety Boots & shoes for heavy metal Industries IS 1989 (Part-1)
AND LEATHER PRODUCTS load
MECHANICAL- LEATHER Tape cotton NEWAR
715 Safety Boots & shoes for heavy metal Industries IS 1954
AND LEATHER PRODUCTS Dimensions Width
MECHANICAL- LEATHER Tape COTTON NEWAR Ends in
716 Safety Boots & shoes for heavy metal Industries IS 1963
AND LEATHER PRODUCTS full width
MECHANICAL- LEATHER
717 Safety Boots & shoes for heavy metal Industries Tape COTTON NEWAR Mass Method-A of IS 1964
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
718 Safety Boots & shoes for heavy metal Industries Tape COTTON NEWAR Picks/cm IS 1963
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
719 Safety Boots & shoes for heavy metal Industries Tearing strength LP-7 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tensile Elongation at after 15
720 Safety Boots & shoes for heavy metal Industries LP-6 of IS 5914
AND LEATHER PRODUCTS minutes %
MECHANICAL- LEATHER
721 Safety Boots & shoes for heavy metal Industries Tensile strength LP-6 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
722 Safety Boots & shoes for heavy metal Industries Tensile strength LP-6 of IS 5914
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 41 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Threads all varieties breaking
723 Safety Boots & shoes for heavy metal Industries Table-1 Cl 3.1 of IS 1720
AND LEATHER PRODUCTS strength single thread
MECHANICAL- LEATHER Threads all varieties for sole
724 Safety Boots & shoes for heavy metal Industries Cl 8.9.2 of IS 1989 (Part-2)
AND LEATHER PRODUCTS stitching construction
MECHANICAL- LEATHER
725 Safety Boots & shoes for heavy metal Industries Threads all varieties length Table-1 Cl 3.1 of IS 1720
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Threads all varieties of
726 Safety Boots & shoes for heavy metal Industries Table-1 of IS 1720
AND LEATHER PRODUCTS construction
MECHANICAL- LEATHER Threads all verities breaking
727 Safety Boots & shoes for heavy metal Industries Table-1 Cl 8.9.2 of IS 1720
AND LEATHER PRODUCTS strength
MECHANICAL- LEATHER Threads all verities nominal
728 Safety Boots & shoes for heavy metal Industries Table-1 Cl 3.1 of IS 1720
AND LEATHER PRODUCTS count
MECHANICAL- LEATHER
729 Safety Boots & shoes for heavy metal Industries Tongue tear strength LP-9 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Water resistance sole leather
730 Safety Boots & shoes for heavy metal Industries LP-12 of IS 5914
AND LEATHER PRODUCTS water Absorption
MECHANICAL- LEATHER
731 Safety Boots & shoes for heavy metal Industries water vapour permeability LP-21 of IS 5914
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Length of Upper Closing
732 Safety Rubber Canvas Boots , for Minors Cl 4.3 IS 9543
AND LEATHER PRODUCTS Threads
MECHANICAL- LEATHER Abrasion Resistance Dry & Wet
733 Safety Rubber Canvas Boots, For Minors Cl.5.5.2 IS 15298 (Part-2)
AND LEATHER PRODUCTS , Inner Layer Of Upper Material
MECHANICAL- LEATHER Water Vapour Permeability of
734 Safety Rubber Canvas Boots, For Minors Cl.6.6 of EN ISO: 20344
AND LEATHER PRODUCTS Upper Material
MECHANICAL- LEATHER Abrasion resistance Compact
735 Safety Rubber Canvas Boots, For Minors Cl 5.14of IS 15298 (Part-1)
AND LEATHER PRODUCTS outsole
MECHANICAL- LEATHER Adhesion of Rubber to Textile
736 Safety Rubber Canvas Boots, For Minors IS 3400 (Part-5)
AND LEATHER PRODUCTS Fabric
MECHANICAL- LEATHER Breaking Load Coated Binding
737 Safety Rubber Canvas Boots, For Minors Table-1 Cl.5.2.3 IS 3976
AND LEATHER PRODUCTS Material
MECHANICAL- LEATHER
738 Safety Rubber Canvas Boots, For Minors Breaking Load of Laces Annex-C of IS 3976
AND LEATHER PRODUCTS
Coated Fabric lining of
MECHANICAL- LEATHER
739 Safety Rubber Canvas Boots, For Minors Compact Insole/in Socks ISO 4674 (Part-1)
AND LEATHER PRODUCTS
/Counter Staffner
MECHANICAL- LEATHER Compact Sole Heel Compact
740 Safety Rubber Canvas Boots, for minors Table-3 Cl 5.2.4.4 of IS 3976
AND LEATHER PRODUCTS Heel Thickness without Cleat
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 42 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
741 Safety Rubber Canvas Boots, For Minors Compression Resistance Cl 5.5 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Compression Test Safety Toe
742 Safety Rubber Canvas Boots, For Minors Cl.3.6 IS 3976
AND LEATHER PRODUCTS Cap
MECHANICAL- LEATHER
743 Safety Rubber Canvas Boots, For Minors Counter Stiffner Thickness Cl 5.2.10 of IS 3976
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Eyelets External Collar
744 Safety Rubber Canvas Boots, For Minors Cl 5.2.9 of IS 3976
AND LEATHER PRODUCTS Diameter
MECHANICAL- LEATHER
745 Safety Rubber Canvas Boots, For Minors Eyelets Wall Thickness Cl.5.2.9 IS 3976
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Flexing Resistance of Upper
746 Safety Rubber Canvas Boots, For Minors Cl 6.5.2 of 15298 (Part-1)
AND LEATHER PRODUCTS Material
MECHANICAL- LEATHER
747 Safety Rubber Canvas Boots, for minors Flexing Resistance of Outsole Cl 8.4 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Footwear fitting dimensions
748 Safety Rubber Canvas Boots, For Minors Cl 5.1.1 of IS 3976
AND LEATHER PRODUCTS leangth of last
MECHANICAL- LEATHER
749 Safety Rubber Canvas Boots, for minors Hydrolysis of Bottom Sole ISO 5423
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
750 Safety Rubber Canvas Boots, For Minors Impact test Safety Footwear Cl.3.5 IS: 3976
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
751 Safety Rubber Canvas Boots, For Minors Laces Length Cl 5.2.8.1 of IS 3976
AND LEATHER PRODUCTS
Leather lining Tear Strength of
MECHANICAL- LEATHER
752 Safety Rubber Canvas Boots, For Minors Compact Insole/In ISO 3377 (Part-2)
AND LEATHER PRODUCTS
Socks/Counter Staffner
MECHANICAL- LEATHER Rubber component thickness
753 Safety Rubber Canvas Boots, For Minors Table-3 Cl.5.2.5.4 IS: 3976
AND LEATHER PRODUCTS of sole & heel
MECHANICAL- LEATHER
754 Safety Rubber Canvas Boots, for Minors Safety Toe Cap Impact Test Cl 5.7 of IS 3976
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Sole heel resistance to hot
755 Safety Rubber Canvas Boots, for minors Cl 8.7 of IS 15298 (Part-1)
AND LEATHER PRODUCTS contact
MECHANICAL- LEATHER
756 Safety Rubber Canvas Boots, For Minors Sole Interlayer Bond Strength Cl.5.2 IS 15298 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Tear strength of Coated Fabric
757 Safety Rubber Canvas Boots, For Minors ISO 4674 (Part-1)
AND LEATHER PRODUCTS in Upper/Reinforcing material
MECHANICAL- LEATHER Tear Strength of Leather in
758 Safety Rubber Canvas Boots, For Minors ISO 3377 (Part-2)
AND LEATHER PRODUCTS Upper/Reinforcing Material
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 43 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER
759 Safety Rubber Canvas Boots, for minors Tear strength of Outsole ISO 34-1
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Water Vapour Coefficient of
760 Safety Rubber Canvas Boots, For Minors Cl.6.8 EN ISO 20344
AND LEATHER PRODUCTS Upper Material
MECHANICAL- LEATHER
761 Safety Rubber Canvas Boots, For Minors Whole footwear ageing Cl 5.2.5.3 of IS 3976
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
762 Slipper Rubber Insole cover (Socks) thickness Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Blown sponge for bottom lining
763 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS on finished slipper thickness
MECHANICAL- LEATHER
764 Slipper Rubber Dimensions length of last Cl 3.1.1 of IS 11544
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
765 Slipper Rubber Dimensions of joint grith Cl 3.1.1 of IS 11544
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
766 Slipper Rubber Dimensions of treads width Cl 3.1.1 of IS 11544
AND LEATHER PRODUCTS
Insole rubber between the two
MECHANICAL- LEATHER
767 Slipper Rubber layers of sponge (insole-II) Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS
Thickness
Lining fabric sheeting brown
for outer lining , sheeting white
MECHANICAL- LEATHER
768 Slipper Rubber for inner lining & cotton cloth IS/ISO 150-C 10
AND LEATHER PRODUCTS
color fastness without sheeting
white
Lining fabric sheeting brown
MECHANICAL- LEATHER for outer lining , sheeting white
769 Slipper Rubber IS 1963
AND LEATHER PRODUCTS for inner lining & cotton cloth
ends and picks/cm
Lining fabric sheeting brown
MECHANICAL- LEATHER for outer lining , sheeting white
770 Slipper Rubber IS 1964
AND LEATHER PRODUCTS for inner lining & cotton cloth
Mass
MECHANICAL- LEATHER Rubber components Adhesive
771 Slipper Rubber IS 3400 (Part-2)
AND LEATHER PRODUCTS Aged for component -A & B
MECHANICAL- LEATHER Rubber components Adhesive
772 Slipper Rubber Table-1 of IS 4663
AND LEATHER PRODUCTS component-A thickness
MECHANICAL- LEATHER Rubber components Adhesive
773 Slipper Rubber IS 3400 (Part-2)
AND LEATHER PRODUCTS components -A hardness
MECHANICAL- LEATHER Rubber components Adhesive
774 Slipper Rubber Cl 3.1.1 of IS 11544
AND LEATHER PRODUCTS Components -B thickness
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 44 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Rubber components Adhesive
775 Slipper Rubber Table -1 Cl 2.2.1 of IS 4663
AND LEATHER PRODUCTS components-B hardness
MECHANICAL- LEATHER Rubber components Adhesive
776 Slipper Rubber IS 4663
AND LEATHER PRODUCTS peeling load dry
MECHANICAL- LEATHER Rubber components Adhesive
777 Slipper Rubber Appendix-A of IS 4663
AND LEATHER PRODUCTS Peeling load wet
Rubber components change in
MECHANICAL- LEATHER
778 Slipper Rubber Initial hardness IRHD after IS 3400 (Part-2)
AND LEATHER PRODUCTS
accelerated Ageing
MECHANICAL- LEATHER
779 Slipper Rubber Rubber components hardness IS 3400 (Part-2)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Rubber components relative
780 Slipper Rubber IS 3400 (Part-9)
AND LEATHER PRODUCTS density
MECHANICAL- LEATHER Rubber pipping (Black for
781 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS vamp) Thickness
MECHANICAL- LEATHER Rubber pipping (Black for
782 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS vamp) Width
Self blown sponge rubber
MECHANICAL- LEATHER
783 Slipper Rubber Insole on finished slipper Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS
thickness
MECHANICAL- LEATHER Sole with heel combined
784 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS forepart with bar thickness
MECHANICAL- LEATHER Thread cotton sewing thread
785 Slipper Rubber IS 1670
AND LEATHER PRODUCTS Breaking load
MECHANICAL- LEATHER Threads cotton sewing threads
786 Slipper Rubber Annex- B-3 of IS 1670
AND LEATHER PRODUCTS length
MECHANICAL- LEATHER Vamp flexing without lining
787 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS thickness
MECHANICAL- LEATHER Welt rubber fixing laid insole
788 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS edge thickness
MECHANICAL- LEATHER Welt rubber fixing laid insole
789 Slipper Rubber Table-3 Cl 3.2.6 of IS 11544
AND LEATHER PRODUCTS edge width
MECHANICAL- LEATHER Annex:A-2 Table-1 Cl 3.6 of IS
790 Solid PVC Soles And Heels Type-1 & Type-2 Elongation at break
AND LEATHER PRODUCTS 6713
MECHANICAL- LEATHER
791 Solid PVC Soles And Heels Type-1 & Type-2 Hardness IRHD Annex- A6 Cl 3.6.1 of IS 6719
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Annex- A1 Table-1 Cl 3.6 of IS
792 Solid PVC Soles And Heels Type-1 & Type-2 Relative Density
AND LEATHER PRODUCTS 6719
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 45 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Annex: A3 Table-1 Cl 3.6 of IS
793 Solid PVC Soles And Heels Type-1 & Type-2 Tear strength back part
AND LEATHER PRODUCTS 6719
MECHANICAL- LEATHER Annex- A3 Table-1 Cl 3.6 of IS
794 Solid PVC Soles And Heels Type-1 & Type-2 Tear strength fore part
AND LEATHER PRODUCTS 6719
MECHANICAL- LEATHER Annex A2 Table-1 Cl 3.6 of IS
795 Solid PVC Soles And Heels Type-1 & Type-2 Tensile strength
AND LEATHER PRODUCTS 6713
MECHANICAL- LEATHER Annex-A 4 Table-1 Cl 3.6 of IS
796 Solid PVC Soles And Heels Type-1 & Type-2 Volatility
AND LEATHER PRODUCTS 6719
Abrasion Resistance dry & wet
MECHANICAL- LEATHER
797 Sports Footwear Insole Materials-Stoble Non- Cl 7.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS
woven
MECHANICAL- LEATHER Abrasion resistance of Insole
798 Sports Footwear Cl 6.12 of 15298 (Part-1)
AND LEATHER PRODUCTS Material: Cellulose Board
MECHANICAL- LEATHER Abrasion resistance Of Outsole
799 Sports Footwear Cl 8.3 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Materials - Rubber
MECHANICAL- LEATHER Adhesion, Adhesive Strength of
800 Sports Footwear Annex-B of IS 15844
AND LEATHER PRODUCTS Upper/Mid-sole/ Outer sole
Compression Set of Midsole
Material -Ethyl Vinyl Acetate
(EVA), Midsole Materials -
MECHANICAL- LEATHER
801 Sports Footwear Polyurethane, Sockliner Annex-C of IS 15844
AND LEATHER PRODUCTS
Material: Ethyl Vinyl Acetate
(EVA), Sockliner Material:
Polyurethane
Die-c Tear strength of Rubber
Sockliner Material — Ethyl
MECHANICAL- LEATHER Vinyl Acetate (EVA), Midsole &
802 Sports Footwear IS 3400 (Part-17)
AND LEATHER PRODUCTS Sockliner Materials —
Polyurethane, Outsole Material:
Thermo Plastic Urethane (TPU)
MECHANICAL- LEATHER Elongation at break Upper
803 Sports Footwear IS 7016 (Part-2)
AND LEATHER PRODUCTS material ,coated fabric
EVA elongation at break (%) of
rubber components, Midsole &
MECHANICAL- LEATHER Sockliner Material -Ethyl Vinyl
804 Sports Footwear IS 3400 (Part-1)
AND LEATHER PRODUCTS Acetate (EVA), Midsole &
Sockliner Materials -
Polyurethane,
MECHANICAL- LEATHER Flexing index of Insole
805 Sports Footwear Annex-P of IS 15844
AND LEATHER PRODUCTS Material-Cellulose Board
MECHANICAL- LEATHER
806 Sports Footwear Gripping strength of Lace Tags Annex-H of IS 15844
AND LEATHER PRODUCTS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 46 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Heat resistance, Shrinkage
linear test of Midsole Material
— Ethyl Vinyl Acetate (EVA),
Midsole Materials —
MECHANICAL- LEATHER
807 Sports Footwear Polyurethane, Insole Material: Annex-F of IS 15844
AND LEATHER PRODUCTS
Stoble Non-woven, Sockliner
Material: Ethyl Vinyl Acetate
(EVA), Sockliner Material:
Polyurethane
MECHANICAL- LEATHER
808 Sports Footwear Lace-Lace Abrasion Resistance Annex N of IS 15844
AND LEATHER PRODUCTS
MECHANICAL- LEATHER Laces color fastness grey scale
809 Sports Footwear Annex J of IS 15844
AND LEATHER PRODUCTS rating
MECHANICAL- LEATHER Ross Flexing cycles of Outer
810 Sports Footwear IS 3400 (Part-16)
AND LEATHER PRODUCTS sole & Insole material- Rubber
Split Tear strength of Midsole
MECHANICAL- LEATHER Material — Ethyl Vinyl Acetate
811 Sports Footwear Annex D of IS 15844
AND LEATHER PRODUCTS (EVA), Midsole Materials —
Polyurethane
Sports Footwear In sole stoble
MECHANICAL- LEATHER
812 Sports Footwear non woven trouser tear IS 1076 (Part-3)
AND LEATHER PRODUCTS
strength
Sports Footwear mid sole
MECHANICAL- LEATHER Table-6 Annex-C, Cl 3.5 of IS
813 Sports Footwear material EVA compression set
AND LEATHER PRODUCTS 15844
(%)
Sports Footwear upper leather
MECHANICAL- LEATHER
814 Sports Footwear color fastness (crocking rating) IS/ISO 105 (Part-X12)
AND LEATHER PRODUCTS
dry & wet
Sports Footwear upper leather
MECHANICAL- LEATHER
815 Sports Footwear colour fastness (crocking rating LF-10 of IS 6191
AND LEATHER PRODUCTS
) dry & wet
Sports Footwear upper leather
MECHANICAL- LEATHER
816 Sports Footwear colour fastness artificial light LF-4 of IS 6191
AND LEATHER PRODUCTS
with gry scale
MECHANICAL- LEATHER Sports footwear upper leather
817 Sports Footwear LP-6 of IS 5914
AND LEATHER PRODUCTS elongation at break
MECHANICAL- LEATHER Sports Footwear upper leather
818 Sports Footwear IS 14970
AND LEATHER PRODUCTS lastometer test for burst
MECHANICAL- LEATHER Sports Footwear upper leather
819 Sports Footwear IS 14970
AND LEATHER PRODUCTS lastometer test for crack
MECHANICAL- LEATHER Sports Footwear upper leather
820 Sports Footwear IS 7016 (Part-3/Section-2)
AND LEATHER PRODUCTS tear strength
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 47 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- LEATHER Sports Footwear upper leather
821 Sports Footwear LP-6 of IS 5914
AND LEATHER PRODUCTS tear strength
MECHANICAL- LEATHER Sports footwear upper leather
822 Sports Footwear LP-6 of IS 5914
AND LEATHER PRODUCTS tensile length split leather
MECHANICAL- LEATHER sports footwear upper leather
823 Sports Footwear LP-6 of IS 5914
AND LEATHER PRODUCTS tensile strength full grain
MECHANICAL- LEATHER Sports Footwear upper
824 Sports Footwear IS 7016 (Part-2)
AND LEATHER PRODUCTS material breaking strength
Sports Footwear upper
MECHANICAL- LEATHER
825 Sports Footwear material synthetic adhesion Cl 3.4 of IS 15844
AND LEATHER PRODUCTS
strength to sole/mid sole
Sports Footwear upper
MECHANICAL- LEATHER
826 Sports Footwear material synthetic breaking IS 1969 (Part-1)
AND LEATHER PRODUCTS
strength
Sports Footwear upper
MECHANICAL- LEATHER material textile fabric flexing
827 Sports Footwear LP-19 of IS 5914
AND LEATHER PRODUCTS endurance dry & wet &
hydrolysis
Tensile Strength of rubber
Midsole & Sockliner Material —
Ethyl Vinyl Acetate (EVA),
MECHANICAL- LEATHER
828 Sports Footwear Midsole & Sockliner Materials IS 3400 (Part-1)
AND LEATHER PRODUCTS
— Polyurethane, Outsole
Material: Thermo Plastic
Urethane (TPU)
MECHANICAL- LEATHER Trouser tear strength of
829 Sports Footwear Annex- G of IS 15844
AND LEATHER PRODUCTS Outsole materials - Rubber
upper material- leather
MECHANICAL- LEATHER
830 Sports Footwear Adhesive strength, adhesion to Annex-B of IS 15844
AND LEATHER PRODUCTS
sole / midsole
MECHANICAL- LEATHER Upper/Outersole and Sole
831 Sports Footwear Cl 5.2 of IS 15298 (Part-1)
AND LEATHER PRODUCTS Interlayer bond Strength
MECHANICAL- LEATHER water absorption & loss (%) of
832 Sports Footwear Cl 7.2 of 15298 (Part-1)
AND LEATHER PRODUCTS Insole Material: Cellulose Board
MECHANICAL- LEATHER Whole Footwear Energy
833 Sports Footwear Cl 5.14 of IS 15298 (Part-1)
AND LEATHER PRODUCTS absorption at seat region
Whole Footwear Upper to
MECHANICAL- LEATHER midsole bond performance
834 Sports Footwear Cl 3.3.2 of IS 15844
AND LEATHER PRODUCTS leather upper, sole adhesion
along the edge over 16 points
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 48 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Tear strength of Upper,
MECHANICAL- LEATHER
835 Sports Footwear , Derby Shoes Tongue, Lining material- ISO 4674 (Part-1)
AND LEATHER PRODUCTS
Coated Fabric and textile
MECHANICAL- LEATHER Elongartion at break after
836 Unlined Moulded Rubber Boots IS 3400 (Part-1)
AND LEATHER PRODUCTS Ageing
MECHANICAL- LEATHER Elongation at Break Before
837 Unlined Moulded Rubber Boots IS 3400 (Part-1)
AND LEATHER PRODUCTS Ageing
MECHANICAL- LEATHER
838 Unlined Moulded Rubber Boots Flexing Resistance upper Annex-A Cl 5.1.5 of IS 13995
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
839 Unlined Moulded Rubber Boots Resistance to dry heat IS 3400 (Part-4)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
840 Unlined Moulded Rubber Boots Tear resistance upper IS 3400 (Part-12)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
841 Unlined Moulded Rubber Boots Tensile Strength After Ageing IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
842 Unlined Moulded Rubber Boots Tensile strength before Ageing IS 3400 (Part-1)
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
843 Unlined Moulded Rubber Boots Thickness of heel for men Table 1 Cl 4.1 of IS 13995
AND LEATHER PRODUCTS
MECHANICAL- LEATHER
844 Unlined Moulded Rubber Boots Thickness of heel for women Table 1 Cl 4.1 of IS 13995
AND LEATHER PRODUCTS
MECHANICAL- TEXTILE
845 Coated fabric and related products Breaking strength IS 7016 (Part-2)
MATERIALS
MECHANICAL- TEXTILE
846 Coated fabric and related products Bursting strength IS 7016 (Part-6/Section-1)
MATERIALS
MECHANICAL- TEXTILE
847 Coated fabric and related products Extension at Break IS 7016 (Part-2)
MATERIALS
MECHANICAL- TEXTILE Tear resistance of Ballistic
848 Coated fabric and related products IS 7016 (Part-3/Section-2)
MATERIALS Pendulum Method
MECHANICAL- TEXTILE Assessment of pillingfuzzing
849 Textile & Related Fabric IS 10971 (Part-4)
MATERIALS and matting
MECHANICAL- TEXTILE
850 Textile & Related Fabric Mass per unit length IS 1964
MATERIALS
MECHANICAL- TEXTILE Count of yarn removed from
851 Textile & related product IS 3442
MATERIALS fabric
MECHANICAL- TEXTILE
852 Textile & related products Thickness IS 7720
MATERIALS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
QUALITY TESTING & RESEARCH LAB, PLOT NO. 28, 29, PREM VIHAR, BISRAKH ROAD,
Laboratory Name :
CHHAPRAULA, GHAZIABAD, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-12450 Page No 49 of 49
Validity 23/10/2023 to 22/10/2025 Last Amended on -
Component, parameter or Test Method Specification
characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- TEXTILE
853 Textile & related products (Textile yarn fabric & Garments) Linear density of yarn IS 1315
MATERIALS
MECHANICAL- TEXTILE Tear strength of woven fabric
854 Textile & related products (Textile yarn fabric & Garments) IS 6489
MATERIALS (weft way)
MECHANICAL- TEXTILE Threads/unit length of woven
855 Textile & related products (Textile yarn fabric & Garments) IS 1963
MATERIALS fabric
MECHANICAL- TEXTILE
856 Textile & related products (Textile yarn fabric & Garments) Bursting strength of fabric IS 1966 (Part-1)
MATERIALS
MECHANICAL- TEXTILE
857 Textile & related products (Textile yarn fabric & Garments) Pilling resistance test IS 10971(Part-1)
MATERIALS
MECHANICAL- TEXTILE
858 Textile & related products Elongation at maximum force IS 1969 (Part-1)
MATERIALS
MECHANICAL- TEXTILE
859 Textile & related products Length of fabric IS 1954
MATERIALS
MECHANICAL- TEXTILE
860 Textile & related products Mass per unit area IS 1964
MATERIALS
MECHANICAL- TEXTILE
861 Textile & related products Tear strength warp way IS 6489 (Part-1)
MATERIALS
MECHANICAL- TEXTILE
862 Textile & related products Tear strength weft way IS 6489 (Part-1)
MATERIALS
MECHANICAL- TEXTILE Tensile Strength of maxmium
863 Textile & related products IS 1969 (Part-1)
MATERIALS force
MECHANICAL- TEXTILE
864 Yarn Fabric Lea Strength IS 1671
MATERIALS
MECHANICAL- TEXTILE Elongation at break of single
865 Yarn materials IS 1670
MATERIALS yarn
MECHANICAL- TEXTILE
866 Yarn product Breaking load of single yarn IS 1670
MATERIALS
MECHANICAL- TEXTILE
867 Yarn product Tenacity of yarn IS 1670
MATERIALS
This is annexure to 'Certificate of Accreditation' and does not require any signature.
You might also like
- Children Footwear - Specifications and Test Methods 30201 - ENo ratings yetChildren Footwear - Specifications and Test Methods 30201 - E16 pages
- Deutsche Akkreditierungsstelle GMBH Annex To The Accreditation Certificate D-Pl-11339-01-00 According To Iso/Iec 17025:2005No ratings yetDeutsche Akkreditierungsstelle GMBH Annex To The Accreditation Certificate D-Pl-11339-01-00 According To Iso/Iec 17025:200514 pages
- Unlined Moulded Rubber Boots-SpecificationNo ratings yetUnlined Moulded Rubber Boots-Specification9 pages
- Amendment No. 1 January 2019 TO Is 15298 (Part 4) : 2017 Personal Protective EquipmentNo ratings yetAmendment No. 1 January 2019 TO Is 15298 (Part 4) : 2017 Personal Protective Equipment2 pages
- Protocols Specifications and Standard Requirements - Hardlines - Feb 2021No ratings yetProtocols Specifications and Standard Requirements - Hardlines - Feb 202175 pages
- Intertek Standard of HP Mark For Footwear (International Market) - Durable - (HP-In-FW-V2-0323E)No ratings yetIntertek Standard of HP Mark For Footwear (International Market) - Durable - (HP-In-FW-V2-0323E)2 pages
- SG-The Test Mark For Low Pollutant Leather Products: Version 09/2006No ratings yetSG-The Test Mark For Low Pollutant Leather Products: Version 09/20066 pages
- Footwear Booklet (R1) Testing ProceduresNo ratings yetFootwear Booklet (R1) Testing Procedures8 pages
- Yr ( LLL:, Ifwx:T I:#"#I, , Rep'R'L: CertificateNo ratings yetYr ( LLL:, Ifwx:T I:#"#I, , Rep'R'L: Certificate3 pages
- Quality Assurance Product Inspect and Testing Capabilities1No ratings yetQuality Assurance Product Inspect and Testing Capabilities125 pages
- Test Methods For Textile Fibres With Textile LabNo ratings yetTest Methods For Textile Fibres With Textile Lab5 pages
- Deputy Head Academic Role and ResponsibilitiesNo ratings yetDeputy Head Academic Role and Responsibilities3 pages
- Louise Atkins - Robert West - Susan Michie - The Behaviour Change Wheel - A Guide To Designing Interventions (2014, Silverback Publishing) - Libgen - LiNo ratings yetLouise Atkins - Robert West - Susan Michie - The Behaviour Change Wheel - A Guide To Designing Interventions (2014, Silverback Publishing) - Libgen - Li333 pages
- Economics Private Public Choice 17th Edition James D Gwartney Digital Access67% (3)Economics Private Public Choice 17th Edition James D Gwartney Digital Access405 pages
- Environmental Impact Assessment Guideline of Ethiopia100% (2)Environmental Impact Assessment Guideline of Ethiopia3 pages
- Application of Matrix Converter For Variable Speed Wind Turbine Driving A Doubly Fed Induction GeneratorNo ratings yetApplication of Matrix Converter For Variable Speed Wind Turbine Driving A Doubly Fed Induction Generator5 pages
- MAXHUB XBoard V7 Series Datasheet V1.3 (20240619)No ratings yetMAXHUB XBoard V7 Series Datasheet V1.3 (20240619)4 pages
- Zoran Krilov, Boris Kaved Ija, Tomislav BukovacNo ratings yetZoran Krilov, Boris Kaved Ija, Tomislav Bukovac12 pages