Rail type terminal blocks

Rail type terminal blocks

Line-up
Multi-rail Standard type Multi-rail Raised type
TX series TXU series
p.47 p.48

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
IEC 35mm IEC 35mm

Clutch Lock
Kasuga Kasuga
C type C type

IEC/C type IEC/C type

dual purpose dual purpose

Thread type terminal block, with the best usability. Type equipped with jump-up to TX series function.
Detailed frame and wide range of accessories available.

PLC Interface
Multi-rail Stud type Finger protection type
TXW, TXW-DR and TXW-DFR series TFP, TTFP and TFE series
p.49 p.50
IEC 35mm IEC 35mm

Kasuga Kasuga
C type C type

IEC/C type IEC/C type

dual purpose dual purpose

Rail Type
Stud type terminal block. Terminal block with finger protect mechanism.
Branch type also available. 2-stage type and earth type (TFE) also available.

2-stage type Quick joint rail type

TTG, TT and TTJ series TN series
p.51 p.52

Assembly
IEC 35mm IEC 35mm

IEC 15mm IEC/C type

（Only TTJ） dual purpose

Kasuga
C type

IEC/C type
dual purpose
Special Purpose

2-stage type terminal block, best for narrow space. Terminal block that can be easily attached or detached
from IEC rail surface.

Small rail type for equipment C rail type

TXJ series TR series
p.52 p.53
IEC 15mm Kasuga
C type

IEC/C type
dual purpose
Terminal

Terminal block applicable to IEL 15mm width rail, Terminal block applicable to solid C type steel rail.
less space type. Best for control circuit.

Remark: There are devices that do not partly apply in the indicated identification mark.
46
 Rail type terminal blocks

Multi-rail terminal block TX, TXU and TXW Series

Standard type
Line-up

Number of External dimensions (mm) General mass

Application Type name
contents A B C D per pole (g)
Terminal unit
600V 1.25㎜2 ［15A］ M3×6± screw type TX 7 60P 38 29 7.3 6 6
2㎜2 ［20A］ M3×8± screw type TX 10 SM3 60P 8 6.7 6.5
M3.5×8± screw type TX 10 S 60P 6.5
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

M3.5×8± screw type TX 10 60P 9.5 8 8

Clutch Lock

5.5㎜2 ［40A］ M4×10± screw type TX 20 60P 12 9.7 11

8㎜2 ［50A］ M5×12± screw type TX 30 30P 46 34 14.5 12.5 22
14㎜2 ［80A］ M5×12± screw type TX 50 30P 37 15 25
22㎜2 ［90A］ M6×12± with round washer TX 60 10P 54 38 19.5 17 37
38㎜2 ［130A］ M8×14＋ hexagonal bolt TX 100 6P 72 45 27 24 83
60㎜2 ［175A］ M8×16＋ hexagonal bolt TX 150 6P 76 51 28 25 96
100㎜2 ［240A］ M10×12＋ hexagonal bolt TX 200 3P 82 57.5 39 31 175
150㎜2 ［310A］ M10×20＋ hexagonal bolt TX 300 3P 86 62.5 46 37.5 215
200㎜2 ［400A］ M12×25 hexagonal bolt TX 400 3P 120 73.5 62 52 382
PLC Interface

150㎜2×2 ［500A］
200㎜2 ［400A］ M16×40 stud TX 600 3P 86.5 64 650
250㎜2 ［500A］
325㎜2 ［600A］
End plate
For TX 7 to TX20 TXA 1 10 pieces 38 29 Thickness 3 2.5
For TX 30 TXA 3 10 pieces 46 34 4
For TX 50 TXA 5 10 pieces 49 37 5
For TX 60 TXA 6 5 pieces 54 38 Thickness 3.5 5.5
For TX 100 TXA 10 5 pieces 72 45 Thickness 4 11
For TX 150 TXA 15 5 pieces 76 51 14
Rail Type

Insulation barrier
For TX 600（Dimension A 240mm in setting） TXH 60 2 pieces − − − 12

B
Assembly

A C
TX7 TX30 TX200

TX series
Name sticker
Cover
Special Purpose

End plate

Short bar

Removal tool

Stopper
Terminal

47
 Rail type terminal blocks

Multi-rail terminal block TX, TXU and TXW Series

Raised type

Line-up
Application Type name Number of External dimensions (mm) General mass
contents A B C D per pole (g)
Terminal unit
600V 1.25㎜2 ［15A］ M3×8± raised type TXU 7 60P 38 32.5 7.3 6 7.5
2㎜2 ［20A］ M3×8± raised type TXU 10 SM3 60P 8 6.7 8
M3.5×8± raised type TXU 10 S 60P 8

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
M3.5×8± raised type TXU 10 60P 9.5 8 9

Clutch Lock
5.5㎜2 ［40A］ M4×8.5± raised type TXU 20 60P 11.5 9.7 13
8㎜2 ［50A］ M5×12± raised type TXU 30 30P 46 40 14.5 12.5 25
14㎜2 ［80A］ M5×12± raised type TXU 50 30P 42 15 28
22㎜2 ［90A］ M6×12± raised type TXU 60 10P 54 44 19.5 17 37
38㎜2 ［130A］ M8×15＋ hexagonal bolt raised type TXU 100 6P 72 57 27 24 104
End plate
For TXU 7 to 20 TXUA 1 10 pieces 38 32.5 Thickness 3 2.5
For TXU 30 TXUA 3 10 pieces 46 40 4.5
For TXU 50 TXUA 5 10 pieces 49 42 5

PLC Interface
For TXU 60 TXUA 6 5 pieces 54 44 Thickness 3.5 6
For TXU 100 TXUA 10 5 pieces 72 57 Thickness 4 14

A D

B
C

TXU10 TXU30

Rail Type
Rating when the product is used as UL/CSA certified part or EN/IEC standard certified part
(TÜV certification CE)
EN/IEC standard UL standard CSA standard
Rated
Basic type name Rated Applicable wire Rated Applicable wire Rated Applicable wire
voltage
current AWG(JIS) Note current AWG(MCM) Note current AWG(MCM)Note
(V)
Standard type Raised type (A) Single wire Stranded wire (A) Single wire Stranded wire (A)
TX 7 TXU 7 600 15 20 to 16 20 to 16 10 20 to 16 20 to 16 10 20 to 16

Assembly
TX 10 SM3 TXU 10 SM3 600 20 20 to 14 20 to 14 15 20 to 14 20 to 14 15 20 to 14
TX 10 S TXU 10 S 600 20 20 to 14 20 to 14 15 20 to 14 20 to 14 15 20 to 14
TX 10 TXU 10 600 25 20 to 14 20 to 14 20 20 to 14 20 to 14 20 20 to 14
TX 20 TXU 20 600 40 18 to 10 18 to 10 30 18 to 10 18 to 10 30 18 to 10
TX 30 TXU 30 600 60 16 to 10 16 to 8 50 16 to 12 16 to 10 45 16 to 8
*8
TX 50 TXU 50 600 60 16 to 8 16 to 8 30 16 to 10 16 to 10 − −
80 − *6 65 − *6
Special Purpose
TX 60 TXU 60 600 110 *14 to 10 *14 to 4 80 *14 to 10 *14 to 4 80 *14 to 4
TX 100 TXU 100 600 140 − *8 to 2 115 − *8 to 2 115 *8 to 2
TX 150 − 600 190 − *4 to（60㎜2） 175 − *6 to 2/0 175 *6 to 2/0
TX 200 − 600 300 − *2 to（100㎜2） 230 − *4 to 4/0 230 *4 to 4/0
TX 300 − 600 350 − *2 to（150㎜2） 285 − *4 to（300） 310 *4 to（300）
TX 400 − 600 540 − （100
* to 250㎜2） 380 − *1/0 to（500） 380 *1/0 to（500）
TX 600 − 600 540 − （200
* to 325㎜2） − − − − −
Notes:
The table above is based on connection to the copper bare wire and the crimp terminal. The applicable wires with * indicates connection to the crimp
terminal only. Use UL standard parts and CSA standard parts for crimp terminal.
Be careful for the following points:
・Connection to crimp terminal: Use the crimp terminal with insulated coating or insulate the bare crimp terminal with sleeve, tube or tape.
・Connection to two bare wires: Connect the wire with the same size and type (single wire or stranded). Do not connect the wires with different sizes and
Terminal

types.

48
 Rail type terminal blocks

Multi-rail terminal block TXW Series

Stud type
Line-up

Application Type name Number of External dimensions (mm) General mass

contents A B C D per pole (g)
Terminal unit
600V 60㎜2 ［130A］ M8×25 stud TXW 100R 6P 76 56.5 30 27 117
(With guide)
60㎜2 ［175A］ M8×20 stud TXW 150 6P 51 28 25 115
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

100㎜2 ［240A］ M10×30 stud TXW 200R 3P 88 61 35 31 197

Clutch Lock

(With guide)
200㎜2 ［400A］ M12×35 stud TXW 400 3P 116 73.5 62 52 370
150㎜2×2 ［500A］
End plate
For TXW 100R TXWA 10 5 pieces 76 56.5 Thickness 4 14
For TXW 150 TXA 15 5 pieces 51 14
For TXW 200R TXWA 20 5 pieces 88 61 17
For TXW 400 TXWA 40 3 pieces 116 73.5 Thickness 5 30
PLC Interface

A D

B
C

TXW100R
Rail Type

Multi-rail terminal block TXW-DR and TXW-DFR Series

Stud branching type
Application Type name Number of External dimensions (mm) General mass
contents A B C D per pole (g)
Terminal unit
600V Input: 60㎜2 [130A] M8×25 stud TXW 100 DR 6P 76 56.5 30 27 142
(With guide)
Output: 22㎜2 [90A] M6×12± with round washer,
Assembly

8㎜2 [50A]×2 M5×10 (2 pieces) ± with round washer

Input: 100㎜2 [240A] M10×25 stud TXW 200 DR 3P 88 61 35 31 236
(With guide)
Output: 38㎜2 [130A] M8×16± with round washer,
8㎜2 [50A]×2 M5×10 (2 pieces) ± with round washer
Input: 60㎜2 [130A] M8×25 stud TXW 100 DFR 6P 76 56.5 30 27 125
(With guide)
Output: 5.5㎜2 [40A]×4 M4×8 (4 pieces) ± with round washer
Special Purpose

Input: 100㎜2 [240A] M10×30 stud TXW 200 DFR 3P 88 61 35 31 220

(With guide)
Output: 8㎜2 [50A]×4 M5×10 (4 pieces) ± with round washer
End plate
For TXW 100DR and TXW 100DFR TXWA 10 5 pieces 76 56.5 Thickness 4 14
For TXW 200DR and TXW 200DFR TXWA 20 5 pieces 88 61 Thickness 4 17

A D
B
Terminal

C
TXW100DR TXW100DFR

49
 Rail type terminal blocks

Finger protection terminal block TFP, TTFP and TFE Series

Line-up
Application Type name Number of External dimensions (mm) General mass
contents A B C D per pole (g)
Terminal unit
Standard 1.25㎜2 ［15A］ M3×8± raised type TFP 15 50P 42 36.5 7 6 7
type 600V 2㎜2 ［20A］ M3.5×8± raised type TFP 20 50P 42 36.5 8 6.7 9
5.5㎜2 ［40A］ M4×8.5± raised type TFP 40 50P 47 38.5 11 9.7 14

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
14㎜2 ［80A］ M5×10± raised type TFP 80 20P 65 47.5 14 12.5 29

Clutch Lock
2-stage 2㎜2 ［20A］ M3×8± raised type TTFP 203 20 pieces 69 60.5 8 6.7 20
type 600V M3.5×8± raised type TTFP 2035 20 pieces 69 60.5 8 6.7 21
For grounding 2㎜2 M3.5×8± raised type TFE 20 20P 51.5 39.5 9.5 6.7 26
600V 5.5㎜2 M4×8.5± raised type TFE 40 20P 53.5 41 12.5 9.7 33
End plate
For TFP 15 and TFP 20 TFPA 20 10 pieces 42 36.5 Thickness 3 2.5
For TFP 40 TFPA 40 10 pieces 47 38.5 Thickness 3 5
For TFP 80 TFPA 80 10 pieces 65 47.5 Thickness 3 7
For TTFP 203 and TTFP 2035 TTFPA 20 5 pairs 69 60.5 Thickness 8 13

PLC Interface
Remark: Body color is gray. But earth terminal block is in green and yellow, 2-tone color.

A D

B
C

TFP20 TFE20 TTFP203

Rail Type
Rating when the product is used as UL.c-UL-us certified part or EN/IEC standard certified part
(TÜV certification CE)
EN/IEC standard UL standard c-UL-us standard
Rated
Note 3
Rated Applicable wire Rated Applicable wire Rated Applicable wire
type name voltage Note 2

current (AWG/MCM) Note 1 current (AWG/MCM) Note 1 FW current (AWG/MCM)Note 1

(V)
(A) Single wire Stranded wire (A) Single wire Stranded wire (A)
TFP 15 600 15 20 to 16 20 to 16 10 20 to 16 20 to 16 2 10 20 to 16
（0.5 to 1.5㎜2） （0.5 to 1.5㎜2）

Assembly
TFP 20 600 20 20 to 14 20 to 14 20 20 to 14 20 to 14 1 20 20 to *14
（0.5 to 2.5㎜2） （0.5 to 2.5㎜2）
TFP 20＋ 600 − − − 15 2 − −
TFP 40 600 40 18 to 10 18 to 10 30 18 to 10 18 to 10 1 30 18 to *10
（0.75 to 6㎜2） （0.75 to 6㎜2）
TFP 40＋ 600 − − − 25 18 to 12 18 to 12 2 − −
TFP 80 600 60 16 to 8 16 to 8 65 16 to 10 16 to *6 1 65 16 to *6
（1.5 to 10㎜2） （1.5 to 10㎜2）
Special Purpose
80 *6（16㎜2）
TFP 80＋ 600 − − − 30 14 to 12 − 2 − −
TTFP 203 600 20 20 to 14 20 to 14 15 20 to 14 20 to 14 2 15 20 to 14
（0.5 to 2.5㎜2） （0.5 to 2.5㎜2）
TTFP 2035 600 20 20 to 14 20 to 14 15 20 to 14 20 to 14 2 15 20 to 14
（0.5 to 2.5㎜2） （0.5 to 2.5㎜2）
TFE 20 600 − 20 to 14 20 to 14 − 20 to 14 20 to 14 1 − 20 to *14
（0.5 to 2.5㎜2） （0.5 to 2.5㎜2）
TFE 20＋ 600 − − − − 20 to 16 18 to 14 2 − −
TFE 40 600 − 18 to 10 18 to 10 − 18 to 10 18 to 10 1 − 18 to *10
（0.75 to 6㎜2） （0.75 to 6㎜2）
TFE 40＋ 600 − − − − 16 to 12 16 2 − −
Terminal

Notes:
1. The table above is based on connection to the copper bare wire and the crimp terminal. The applicable wires with * indicates connection to the crimp
terminal only. Use UL standard parts and c-UL-us standard parts for crimp terminal. Be careful for the following points:
・Connection to crimp terminal: Use the crimp terminal with insulated coating or insulate the bare crimp terminal with sleeve, tube or tape.
・Connection to two bare wires: Connect the wire with the same size and type (single wire or stranded). Do not connect the wires with different sizes
and types.
2. FW1: Factory wiring, FW2: Factory wiring and field wiring
3. When FW2 is used in TFP20, TFP40, TFP80, TFE20 and TFE40, use the rating with (+) at the end of the type name.

50
 Rail type terminal blocks

2-stage type terminal block TTG, TT and TTJ Series

Line-up

Number of External dimensions (mm) General mass

Application Type name contents A B C D per pole (g)
Terminal unit
TTG series 2㎜2 ［20A］ M3×8± screw type TTG 20 3 20 pieces 62 57 8 6.7 17
600V M3×8± raised type TTG 20 U3 20 pieces 19
M3.5×8± screw type TTG 20 35 20 pieces 19
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

M3.5×8± raised type TTG 20 U35 20 pieces 21

Clutch Lock

5.5㎜2 ［40A］ M4×10± screw type TTG 40 20 pieces 67 62 11 9.7 30

M4×8.5± raised type TTG 40 U 20 pieces 32
TT series 1.25㎜2 ［15A］ M3×8± screw type TT 10 SK 20 pieces 62 50.5 8 6.7 16
600V M3×8± raised type TT 10 SUK 20 pieces 18
2㎜2 ［20A］ M3.5×8± screw type TT 10 SKM3.5 20 pieces 18
M3.5×8± raised type TT 10 SUKM3.5 20 pieces 20
3.5㎜2 ［30A］ M4×10± screw type TT 20 K 20 pieces 67 58 11.5 9.7 29
M4×10± raised type TT 20 UK 20 pieces 31
TTJ 2㎜2 ［20A］ M3.5×8± screw type TTJ 8 N 20 pieces 48.5 49 8 6.7 13
PLC Interface

500V M3.5×8± raised type TTJ 8 NU 20 pieces 15

End plate
For TTG 203, TTG 20U3, TTG 2035 and TTG 20U35 TTGA 20 5 pairs 62 58.1 Thickness 8 13
For TTG 40、TTG 40U TTGA 40 5 pairs 67 62.6 Thickness 10.5 22
For TT 10 TTA1SK 5 pairs 62 50.5 Thickness 8 12.7
For TT 20 TTA2K 5 pairs 67 59 Thickness 8 22
For TTJ 8N and TTJ 8NU TTJA8N 5 pairs 49 49 Thickness 8 11

D
Rail Type

B
A
TTG20 TT20K

Rating when the product is used as c-UL-us certified part or EN/IEC standard certified part
Assembly

(TÜV certification CE)

EN/IEC standard UL standard CSA standard
Rated
type name Rated Applicable wire Rated Applicable wire Rated Applicable wire
voltage
current (AWG/MCM) Note current (AWG/MCM) Note current (AWG/MCM) Note
(V)
screw type raised type (A) Single wire Stranded wire (A) Single wire Stranded wire (A)
TTJ 8N TTJ 8NU 500 20 20 to 14 20 to 14 − − − − −
（0.5 to 2.5㎜2）（0.5 to 2.5㎜2）
Special Purpose

TTG 203 TTG 20U3 600 20 20 to 14 20 to 14 15 20 to 14 20 to 14 15 20 to 14

（0.5 to 2.5㎜2）（0.5 to 2.5㎜2）
TTG 2035 TTG 20U35 600 20 20 to 14 20 to 14 15 20 to 14 20 to 14 15 20 to 14
（0.5 to 2.5㎜2）（0.5 to 2.5㎜2）
TTG 40 TTG 40U 600 40 18 to 10 18 to 10 30 18 to *10 18 to *10 30 18 to *10
（0.75 to 6㎜2） （0.75 to 6㎜2） 25 18 to 12 18 to 12
Notes:
The table above is based on connection to the copper bare wire and the crimp terminal. The applicable wires with * indicates connection to the crimp
terminal only. Use UL standard parts and c-UL-us standard parts for crimp terminal. Be careful for the following points:
・Connection to crimp terminal: Use the crimp terminal with insulated coating or insulate the bare crimp terminal with sleeve, tube or tape.
・Connection to two bare wires: Connect the wire with the same size and type (single wire or stranded). Do not connect the wires with different sizes
and types.
Terminal

51
 Rail type terminal blocks

Quick joint rail type terminal block TN Series

Line-up
Number of External dimensions (mm) General mass
Application Type name contents A B C D per pole (g)
Terminal unit
600V 1.25㎜2 ［15A］ M3 3P integrated structure TN 13 SBKM3 20 pieces 40 30 25 6.7 18
2㎜2 ［20A］ M3.5 3P integrated structure TN 13 SBKM3.5 20 pieces 40 30 25 6.7 18
2㎜2 ［20A］ M3.5 2P integrated structure TN 12 BK 30 pieces 40 30 20.5 8 16

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
3P integrated structure TN 13 BK 20 pieces 40 30 30 8 22

Clutch Lock
5.5㎜2 ［40A］ M4 3P integrated structure TN 20 BK 20 pieces 40 30 35 9.7 30
8㎜2 ［50A］ M5 3P integrated structure TN 30 BK 10 pieces 45 34 43 12.2 55
22㎜2 ［90A］ M6 1P TN 60 BK 10P 56 38 22 17 40
38㎜2 ［130A］ M8 1P TN 100K 6P 74 43 32 24 90
100㎜2 ［240A］ M10 1P TN 200K 3P 86 57 39 31 175
200㎜2 ［400A］ M12 1P TN 400K 3P 125 73 62 52 370
150㎜2×2 ［500A］

PLC Interface
B
C A

TN12BK TN13BK TN200K

Rail Type
Small rail type terminal block for equipment TXJ Series

Number of External dimensions (mm) General mass

Application Type name contents A B C D per pole (g)
Terminal unit
250V 1.25㎜2 ［10A］ M3×6± with round washer TXJ 7 60P 23 19.5 7 6 3
M3×6± screw type TXJ 7Z 60P 23 19.5 7 6 3
500V 2㎜2 ［20A］ M3.5×6± with round washer TXJ 8 60P 28 22 8 6.7 4

Assembly
M3.5×6± screw type TXJ 8Z 60P 28 22 8 6.7 4
End plate
For TXJ 7 and TXJ 7Z TXJA7 10 pieces 23 19.5 Thickness 2.5 1.5
For TXJ 8 and TXJ 8Z TXJA8 10 pieces 28 22 Thickness 2.5 2

A D
Special Purpose
B

C
TXJ7 TXJ8
Terminal

52
 Rail type terminal blocks

C rail type terminal block TR Series

Line-up

Number of External dimensions (mm) General mass

Application Type name contents A B C D per pole (g)
Terminal unit
600V 1.25㎜2 ［15A］ M3×8± screw type TR 10 SK 60P 32.5 28.5 8 6.7 5.5
2㎜2 ［20A］ M3.5×8± screw type TR 10 K 60P 32.5 28.5 9.5 8 7
5.5㎜2 ［40A］ M4×10± screw type TR 20 K 60P 36.5 30.5 11 9.2 11
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

8㎜2 ［50A］ M5×12± screw type TR 30 K 30P 45.5 34 14.5 12.5 21

Clutch Lock

22㎜2 ［90A］ M6×12± with round washer TR 60 K 10P 53 37 19.5 17 35

38㎜2 ［130A］ M8×14＋ hexagonal bolt TR 100 K 6P 71 45 27 24 79
100㎜2 ［240A］ M10×20＋ hexagonal bolt TR 200 K 3P 83.5 57.5 39 31 180
200㎜2 ［400A］ M12×25 hexagonal bolt TR 400 K 3P 120 73.5 62 52 370
150㎜2×2 ［500A］
End plate
For TR 10SK and TR 10K TRA 1 □K 10 pieces 33 28.5 Thickness 2.5 2
For TR 20K TRA 2 □K 10 pieces 37 30.5 Thickness 2.5 2
For TR 30K TRA 3 □K 10 pieces 46 34 Thickness 3.2 2.5
PLC Interface

For TR 60K TRA 6 □K 5 pieces 53 37.5 Thickness 3.3 5

For TR 100K TRA 10 □K 5 pieces 71 45 Thickness 4 10
Remarks:
1. □ of the end plate type name indicates the designated symbol for presence of seal groove. No symbol (With seal groove), N (No seal groove)
2. The type without seal groove also functions as seal stopper. Two are used at both ends.

A D

B
Rail Type

C
TR20K TR100K
Assembly Special Purpose Terminal

53
 Rail type terminal blocks

Rail Type Terminal Block Accessory

Select the accessory that is applicable to terminal unit. Furthermore, the accessories (rail support, removal

Line-up
tool etc.) that enable the use of terminal block more conveniently are also prepared.
List of applicable accessories (TX, TXU, TXW, TFP, TTG, TT, TTJ Series)
TX Series TFP Series TT Series
Name sticker
Cover

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
End plate

Clutch Lock
Rail
Short bar

Removal tool Assembly part Assembly part

(attachment tool) (conjunction screw)
Stopper
Stopper

Terminal unit End plate Cover Name sticker Rail Stopper Short bar Assembly part

TX 7 TXA1 TXB2, TXB2L TXC07 TRC21 (IEC rail) (for IEC rail) TJ762, TJ7202 Completed product of
TXC073 TRC22 TXDA2, TXDA2M TXE1 assembled terminal
TX 10 S M3 TXC1 TRC23 TNDS2, JXDB TXE2 TJ164, TJ1204 block is available.

PLC Interface
TX 10 S TXC13 JTXE3
TX 10 (Kasuga C type TJ162, TJ1202
TX 20 TXC2 rail) TJ262
TX 30 TXA3 TRB3, TRB3L TXC23 TRD2, TRD2M (for Kasuga C JTJ302B
TX 50 TXA5 TRC21 type rail) JTJ802B
TX 60 TXA6 TRB6 TRC22 (IEC / C type TRE1 −
TX 100 TXA10 TRB10N, TRB10N03 TRC23 dual purpose)
TX 150 TXA15 TRB10N TRDA2, TRDA2M
TX 200 Not TRB20N, TRB20N03 Included
TX 300 necessary TRB20N, TRB30N03 (TRC21, TRC22,
TX 400 TRB40N, TRB40N03 TRC23 can be
TX 600 TRB40N, TRB60N03 used)
TXU 7 TXUA1 TXB2, TXB2L TRC21 TJ762, TJ7202 Completed product of

Rail Type
TXU 10 S M3 TRC22 TJ164, TJ1204 assembled terminal
TXU 10 S TRC23 block is available.
TXU 10 TJ162, TJ1202
TXU 20 TJ262
TXU 30 TXUA3 TRB3, TRB3L JTJ302B
TXU 50 TXUA5 JTJ802B
TXU 60 TXUA6 TRB6 −
TXU 100 TXUA10 TRB10N, TRB10N03
TXW 100R TXWA10 TRB10N
TXW 150 TXA15

Assembly
TXW 200R TXWA20 TRB20N
TXW 400 TXWA40 TRB40N
TXW 100DR TXWA10 TRB10N
TXW 100DFR
TXW 200DR TXWA20 TRB20N
TXW 200DFR
TFP 15 TFPA20 （TFPB20） TRC21
(IEC rail) (for IEC rail) TJ7203B Completed product of
TFP 20 TRC22
TXDA2, TXDA2M TXE1 TJ164B, TJ1204B assembled terminal
TFP 40 TFPA40 （TFPB40） TRC23
TNDS2, JXDB TXE2 TJ264B block is available.
Special Purpose
TFP 80 TFPA80 （TFPB80） JTXE3 JTJ802B
TTFP 203 TTFPA20 （TTFPB20） (IEC / C type dual purpose) Set use of TXE2 and TJ164B TTS1S (conjunction screw)
TTFP 2035 TRDA2, TRDA2M TXE2C is recommended TJ1204B TTFPM1S (attachment tool)
TFE 20 − − Included TNDS2 TXE2, − −
TFE 40 (PE symbol sticker) JTXE3
TTG 203 TTGA20 TTB3 (upper stage) TRC21 (IEC rail) Set use of TXE2 and TJ164B TTS1S (conjunction screw)
TTG 20U3 TTB2 (lower stage) TRC22 TXDA2, TXDA2M TXE2C is recommended TJ1204B TTFPM1S (attachment tool)
TTG 2035 TRC23 TNDS2, JXDB
TTG 20U35
TTG 40 TTGA40 TXB2 (upper stage) (IEC / C type dual purpose) JTJ264B TTS2 (conjunction screw)
TTG 40 U TTB2 (lower stage) TRDA2, TRDA2M TTFPM1S (attachment tool)
TT 10 SK TTA1SK TTB1S TRC21 (IEC rail) Set use of TXE2 and TJ161 TTS1S (conjunction screw)
TT 10 SUK TTB1SL TRC22 TXDA2, TXDA2M TXE2C is recommended TJ1201 TTM1S (attachment tool)
TT 10 SK M3.5 TRC23 TNDS2, JXDB
Terminal

TT 10 SUK M3.5 (IEC / C type dual purpose)

TT 20 K TTA2K TXB2 (upper stage) TRDA2, TRDA2M TJ262 TTS2 (conjunction screw)
TT 20 UK TTB2 (lower stage) (Kasuga C type rail) TTM1S (attachment tool)
TRD2, TRD2M
TTJ 8 N TTJA8N TXJB8 (upper stage) TRC11 TXJD15A Note TTJE1 TJ161 TTS8 (conjunction screw)
TTJ 8 NU TTB2 (lower stage) TRC12 TJ1201 TTM1S (attachment tool)
TRC13
Note: TTJ8N and TTJ8NU can use TXDA and TNDS rails (stopper is TXE2) other than TXJD15A rail.
54
 Rail type terminal blocks

List of applicable accessories (TN, TR, TXJ Series)

Line-up

TN Series TR Series TXJ Series

Name sticker
Cover
Cover Cover

Stopper

Rail Name sticker

Stopper
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

Rail
Stopper Rail
Clutch Lock

Terminal unit End plate Cover Name sticker Rail Stopper Short bar Assembly part

TN 13 SBKM3 Not TXB1 Included (IEC rail) (for IEC rail) − −

TN 13 SBK M3.5 necessary TXB1L (TRC21, TRC22, TXDA2, TXDA2M TXE1
TN 12 BK TRC23 can be TNDS2 TXE2
TN 13 BK used) JTXE3
TN 20 BK (IEC / C type
TN 30 BK TRB3, TRB3L dual purpose）
TN 60 BK TRB6 TRDA2, TRDA2M (for C type)
PLC Interface

TN 100 K TRB10N TRE1

TN 200 K TRB20N,
TRB20N03
TN 400 K TRB40N,
TRB40N03
TR 10 SK TRA1K TRB1 TRC11 (Kasuga C type (for Kasuga C TJ161, TJ1201 −
TR 10 K TRA1NK TRB1L TRC12 rail) type） TJ162, TJ1202
TR 20 K TRA2K TRB2 TRC13 TRD2, TRD2M TRE1 TJ261
TRA2NK TRB2L
TR 30 K TRA3K TRB3 TRC21 (IEC / C type (for IEC rail） JTJ302B
TRA3NK TRB 3L TRC22 dual purpose） TXE1、TXE2
TR 60 K TRA6K TRB6 TRC23 TRDA2, TRDA2M JTJ602B
Rail Type

TRA6NK
TR 100 K TRA10K TRB10N JTJ1002B
TRA10NK TRB10N03
TR 200 K − TRB20N
TRB20N03
TR 400 K TRB40N
TRB40N03
TXJ 7 TXJA7 TXJB7 TXJC51, TXJC52 (IEC15mm rail) TXJE1 TJ7201 −
TXJB7L TXJC53 TXJD15A
TXJ 8 TXJA8 TXJB8 TRC11, TRC12 TJ161, TJ1201
Assembly

TXJB8L TRC13

List of applicable accessories (TXF, TXS,TXSU Series)

This is the list of applicable accessories for special purpose terminal block rail type.
Special Purpose

Terminal unit End plate Cover Name sticker Rail Stopper Short bar Assembly part

TXF 10 TXFA1 − Included (IEC rail) (for IEC rail) − −

TXF 10 N TXDA2, TXDA2M TXE1
TXS 20 TXFA1 TXB1, TXB1L TRC21 TNDS2, JXDB TXE2
TRC22 JTXE3
(IEC / C type dual
TRC23
purpose)
TRDA2, TRDA2M
(for Kasuga C
(Kasuga C type type)
rail) TRE1
TRD2, TRD2M
TXSU 20 TXSUA20 − (IEC rail) (for IEC rail) − −
Terminal

TXDA2, TXDA2M TXE1

TNDS2, JXDB TXE2
JTXE3
(IEC / C type dual
purpose)
TRDA2, TRDA2M

55
 Rail type terminal blocks

End plate
This is used for terminal of assembled

Line-up
Type name Applicable unit Thickness General Number of
terminal unit. When two sheets are (mm) mass (g) contents

used for both ends, they also work as TXA 1 TX7 to TX20 3 2.5 10 pieces
stopper of sticker. Furthermore, it is TXA 3 TX30 3 4 10 pieces
TXA 5 TX50 3 4 10 pieces
also possible to use one sheet for one
TXA 6 TX60 3.5 5.5 5 pieces
side by bending and removing the lug TXA 10 TX100 4 11 5 pieces
for pressing sticker. TXA 15 TX150, TXW150 4 14 5 pieces

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
TXUA 1 TXU7 to TXU20 3 2.5 10 pieces

Clutch Lock
TXUA 3 TXU30 3 4.5 10 pieces
TXUA 5 TXU50 3 4.5 10 pieces
TXUA 6 TXU60 3.5 6 5 pieces
TXUA 10 TXU100 4 14 5 pieces
TXFA 1 TXF10, TXF10N, TXS20 3.5 10 10 pieces
TXWA 10 TXW100R, TXW100DR, 4 14 5 pieces
TXW100DFR
When one sheet is used TXWA 20 TXW200R, TXW200DR, 4 17 5 pieces
TXW200DFR
for one side
TXWA 40 TXW400 5 30 3 pieces

PLC Interface
TTA 1 SK TT10SK, TT10SUK 8 with two sheets 12.7 5 sets of A/B
TTA 2 K TT20K, TT20UK 10.5 with two sheets 22 5 sets of A/B
TTJA 8 N TTJ8N, TTJ8NU 8 with two sheets 11 5 sets of A/B
TXJA 7 TXJ7 2.5 1.5 10 pieces
TXJA 8 TXJ8 2.5 2 10 pieces
TFPA 20 TFP15, TFP20 3 2.5 10 pieces
TFPA 40 TFP40 3 5 10 pieces
TFPA 80 TFP80 3 7 10 pieces
When two sheets are TTFPA 20 TTFP203, TTFP2035 8 with two sheets 13 5 sets of A/B
used for both sides TTGA 20 TTG203, TTG2035, 8 with two sheets 13 5 sets of A/B
TTG20U3, TTG20U35
TTGA 40 TTG40, TTG40U 10.5 with two sheets 22 5 sets of A/B

Rail Type
(for TR Series) Type name General
Thickness Number of
Use one sheet for the terminal of There is a groove There is no groove Applicable unit
(mm)
mass contents
for sticker for sticker (g)
assembled terminal unit. However, it is
TRA 1 K TRA 1 NK TR10K, TR10SK 2 2 10 pieces
not necessary for TR200 and TR400.
TRA 2 K TRA 2 NK TR20K 2 2 10 pieces
As the N type has no groove for leading TRA 3 K TRA 3 NK TR30K 3 2.5 10 pieces
name sticker, it is possible to use two TRA 6 K TRA 6 NK TR60K 3 5 5 pieces
sheets for both ends to use them as TRA 10 K TRA 10 NK TR100K 3.5 10 5 pieces

Assembly
stopper of sticker too.

Special Purpose Terminal

56
 Rail type terminal blocks

Cover
This cover is made from
Line-up

Type name Applicable unit Width × length Number of General mass

transparent polycarbonate, (mm) contents (g)

and set-in type. For TX100 TXB 1 TXS20, TN13SBK, TN12BK, TN13BK, 37 × 500 5 pieces 25
or greater models, 3P dedi- TXB 1 L TN20BK 37 × 1000 5 pieces 50
TXB 2 TX7, TX10S, TX10, TX20, TXU7, TXU10S, 38 × 500 5 pieces 19
cated products are also
TXB 2 L TXU10, TXU20, For 2-stage terminal bolck upper stage 38 × 1000 5 pieces 38
available. TT10SK type can (TT20K, TT20UK, TTG40, TTG40U)
be attached to upper stage TRB 1 TR10K 35.5 × 500 5 pieces 24
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

only, TT20K and TTJ8N TRB 1 L 35.5 × 1000 5 pieces 48

Clutch Lock

types can be attached to TRB 2 TR20K 40 × 500 5 pieces 32

TRB 2 L 40 × 1000 5 pieces 64
both of upper stage and TRB 3 TX30, TX50, TXU30, TXU50, TN30BK, 49 × 500 5 pieces 39.5
lower stage. TRB 3 L TR30K 49 × 1000 5 pieces 79
TRB 6 TX60, TXU60, TN60BK, TR60K 56 × 500 5 pieces 43
TRB 10 N TX100, TX150, TXU100, TXW100R, 75 × 500 5 pieces 57
TXW100DR, TXW100DFR, TXW150,
TN100K, TR100K
TRB 20 N TX200, TX300, TXW200R, TXW200DR, 87 × 500 2 pieces 71
TXW200DFR, TN200K, TR200K
PLC Interface

TRB 40 N TX400, TXW400, TX600, TN400K, TR400K 124 × 500 2 pieces 129
TRB 10 N 03 TX100 (dedicated to 3P), TXU100 (dedicated to 3P), 75 × 85 10 pieces 10
TR100K (dedicated to 3P)
TRB 20 N 03 TX200 (dedicated to 3P), TR200K (dedicated to 3P) 87 × 117 5 pieces 17
TRB 30 N 03 TX300 (dedicated to 3P) 87 × 138 5 pieces 21
TRB 40 N 03 TX400 (dedicated to 3P), TR400K (dedicated to 3P) 124 × 186 5 pieces 46
TRB 60 N 03 TX600 (dedicated to 3P) 124 ×192 5 pieces 49
TTB 1 S TT10SK, TT10SUK 31.5 × 500 5 pieces 21
TTB 1 S L 31.5 × 1000 5 pieces 42
TTB 2 TT20K, TT20UK, TTG20, TTG20U, 10.4 × 500 5 pieces 7
TTB 2 L TTG40, TTG40U, TTJ8N, TTJ8NU for lower stage 10.4 × 1000 5 pieces 14
TTB 3 TTG203, TTG2035, TTG20U3, TTG20U35 34 × 500 5 pieces 17
Rail Type

TTB 3 L 34 × 1000 5 pieces 34

TXJB 7 TXJ7 24.5 × 500 5 pieces 12
TXJB 7L 24.5 × 1000 5 pieces 24
TXJB 8 TXJ8, TTJ8N, TTJ8NU for upper stage 29.5 × 500 5 pieces 16
TXJB 8L 29.5 × 1000 5 pieces 32

Insulation barrier
Convenient for preventing short circuit
Assembly

Type name Applicable unit Material Number of General mass

between crimp contacts (poles) when contents (g)
wiring TXH 60 TX600 Polypropylene 2 pieces 12

76
52
Special Purpose

83

t＝2
Terminal

57
 Rail type terminal blocks

Name sticker
It is possible to set the terminal No. etc. on it. As the partitioning line is printed for TXC type, it is possible to

Line-up
attach it to terminal unit after setting a seal on it, and it is very convenient.

Type name Applicable unit CAUTIONS

L Number of General 1. When you use the one made from fiber
Type name Width Width of TX / TT Other Material contents mass
(length) (g)
A partitioning line W Series series (TRC21, TRC11), it is not possible to print
with auto printer. Stamp with rubber
TXC 07 9.5 Front 7.3 TX 7 − Polyvinyl chloride 5m 1 pieces 37
stamp and apply it with tape.

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
Back 8 TX 10S (Thickness 0.5mm)
2. When the number of pins increases, as

Clutch Lock
TXC 073 9.5 Front 7.3 TX 7 Polypropylene 5m 1 pieces 24 the TXC type may generate gap because
Back 8 TX 10S (Thickness 0.5mm) the tolerance is counted, please use it
TXC 1 9.5 Front 8 TX 10S Polyvinyl chloride 5m 1 pieces 37 referencing the table below.
Back 9.5 TX 10 (Thickness 0.5mm)
TXC 13 9.5 Front 8 TX 10S Polypropylene 5m 1 pieces 26 Acceptable maximum number of
Back 9.5 TX 10 (Thickness 0.5mm) units of sticker with partitioning line
TXC 2 9.5 Front 11.5 TX 20 Polyvinyl chloride 5m 1 pieces 37
Terminal unit Number of units
Back 14.5 TX 30 (Thickness 0.5mm)
TX 7, TX10S 60
TXC 23 9.5 Front 11.5 TX 20 Polypropylene 5m 1 pieces 24
TX10 50
Back 14.5 TX 30 (Thickness 0.5mm)
TX20 40
TRC 21 9.5 Plain TX / TT TFP Fiber 5m 1 pieces 32

PLC Interface
TX30 30
TRC 21 L230 Series TTG (Thickness 0.5mm) 230m 1 pieces 1472
TRC 22 Every model TR Polyvinyl chloride 5m 1 pieces 37 Dashed line
TRC 22 L100 (other than Series (Thickness 0.5mm) 100m 1 pieces 740
TXC

A
TRC 23 TTJ8N) (TR30 or Polypropylene 5m 1 pieces 24
TRC 23 L100 greater) (Thickness 0.5mm) 100m 1 pieces 480 W W W
TRC 11 6.5 Plain TTJ8N TR10SK Fiber 5m 1 pieces 24 L

TRC 11 L230 TTJ8NU TR10K (Thickness 0.5mm) 230m 1 pieces 1104

TRC 12 TR20K Polyvinyl chloride 5m 1 pieces 26 TRC

A
TRC 12 L100 (Thickness 0.5mm) 100m 1 pieces 520 L
TRC 13 Polypropylene 5m 1 pieces 18
TRC 13 L100 (Thickness 0.5mm) 100m 1 pieces 360
TXJC 51 5.5 Plain TXJ7, TXJ7Z Fiber 5m 1 pieces 20

Rail Type
(Thickness 0.5mm)
TXJC 52 Polyvinyl chloride 5m 1 pieces 24
(Thickness 0.5mm)
TXJC 53 Polypropylene 5m 1 pieces 17
TXJC 53 L100 (Thickness 0.5mm) 100m 1 pieces 340

Rail
For multi-rail type terminal block, it is

Assembly
General
Height Long hole Length Number of
possible to attach it to four types of Type name Type Material mass
(mm) (mm) (mm) contents
(g)
rails (IEC 35mm width made from
TXDA 2 IEC 35mm Aluminum 7.5 5.2×10 1005 175 1 piece
aluminum, made from steel, C type, TXDA 2M width rail 2010 350 50 pieces
IEC / C type dual purpose). TXDA 2AN Aluminum 7.5 5.2×10 1005 350 1 piece
(No alumite treatment)
JXDA Aluminum 7.5 4.5×25 980 171 1 piece
JXDA M 1960 342 50 pieces
Special Purpose
JXDB Aluminum 7.5 5.2×10 990 177 1 piece
JXDB M 1980 354 50 pieces
JXDC Aluminum 7.5 5.5×25 980 175 1 piece
JXDC M 1960 350 50 pieces
TXDA JXDD Aluminum 7.5 5.5×20.5 1000 174 1 piece
JXDD M 2000 348 50 pieces
TNDS 2 Steel 10 5.2×8 1005 365 1 piece
TNDS 2R Steel 10 5.2×8 1005 365 1 piece
(Trivalent chromate treatment)
TRDA 2 Rail for IEC / Aluminum 10 5.2×10 1005 215 1 piece
TNDS TRDA 2M C type dual 2010 430 30 pieces
TRDA 2K purpose Aluminum 10 5.2×10 1005 215 1 piece
(black Alumite)
TXJD 15A IEC 15mm Aluminum 5 4.1×8 1005 64 1 piece
Terminal

width rail
TRD 2 C type rail Steel 10 5.2×10 1005 450 1 piece
TRDA TRD 2M 2010 900 20 piece
Remarks:
1. Use the steel rail after applying rust resisting coating material to cut surface.
2. When you use the rail leaving long, the intensity increases adequately by securing
a few points not only both ends.

58
 Rail type terminal blocks

Stopper
Attach this to both ends of assembled terminal
Line-up

Type name Applicable unit General mass Number of

unit to fix the unit to rail firmly. It is also possible to per 1 piece (g) contents

attach or remove from surface of rail. TWE 1 IEC 35mm width rail Slim type 11 10 pieces
TWE 2 (TXDA, TNDS, JXDB, Resin 4
TXE 1 TRDA）supported Standard 20
TXE 2 Large type 21
TXE 4 2 Screw mount 12
JTXE3 − 18 100 pieces
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

JTXE5 Large type 20

Clutch Lock

TWE1 TWE2 TXE1 TXE 2 C (accessory plate for TXE2) 8 10 pieces

TRE 1 C type rail supported 12
(TRD, TRDA)
TXJE 1 IEC 15mm width rail 4
(TXJD15A）supported
TXE2 TXE4 JTXE3 TTJE1 IEC 15mm width rail 12
(TXJD15A）supported

Remark:
As TXE2 has a unit-fixing bracket, it is possible to fix the terminal firmly.
Especially, it is optimum for large type terminal block of TX30 or greater.
PLC Interface

For TT Series (2-stage type terminal block), it is fixed more firmly by

TXE2C TRE1 TXJE1 TTJE1 attaching TXE2C (accessory plate) additionally.
Rail Type Assembly Special Purpose Terminal

59
 Rail type terminal blocks

Short bar
This is a transfer bracket convenient for common wiring. There are three

Line-up
types (2-pin, 6-pin, and 20-pin), and each type can be cut for required
number of pins by wire cutter etc. The material is brass nickel plating.
TJ161A (standard) You can select the short bar from three types below.

・A type: type without coating

Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories
・B type: type polyvinyl chloride is coated on A type

Clutch Lock
・C type: type bending is processed for A type
TJ161B (with coating)

Remarks:
1. Here provides accessories applicable to rail type terminal block. For the short bars that are not
provided here, please refer to “Terminal Block Accessory”.
2. Use the short bar so that the total current of every pin which short-circuits is conducting current
or less of short bar.
TJ161C (bending)

Standard type

PLC Interface
No. Applicable terminal block Conducting General Number of
Type name Type mass (g) contents
of pins Rail type terminal block Assembled terminal block current
TJ 161 A 6 Without coating TT10SK, TT10SUK, TC10S, TC10SU, TEN8, TEU8 20A 2.5 10 pieces
TJ 161 B 6 With coating TT10SKM3.5, TT10SUKM3.5, 3 10 pieces
TJ 161 C 6 Bending TTJ8N, TTJ8NU, TR10SK, 2.5 10 pieces
TJ 1201 A 20 Without coating TXJ8 9 10 pieces
TJ 1201 B 20 With coating 10 10 pieces
JTJ 122 B□ 2 With coating TX10, TXU10, TR10K TXM10, TXUM10 20A 1.3 10 pieces
TJ 162 A 6 Without coating 3.5 10 pieces
TJ 162 B 6 With coating 4 10 pieces
TJ 162 C 6 Bending 3.5 10 pieces
TJ 1202 A 20 Without coating 10.5 10 pieces

Rail Type
TJ 1202 B 20 With coating 12 10 pieces
TJ 163 A 6 Without coating − T10, TL15 20A 3.5 10 pieces
TJ 163 B 6 With coating 4 10 pieces
TJ 163 C 6 Bending 3.5 10 pieces
JTJ 124 B□ 2 With coating TX10S, TXU10S, TFP20, TXM10S, TXUM10S 20A 1 10 pieces
TJ 164 A 6 Without coating TTFP203, TTFP2035, 3 10 pieces
TJ 164 B 6 With coating TTG203, TTG20U3, 3.5 10 pieces
TJ 164 C 6 Bending TTG2035, TTG20U35 3 10 pieces
TJ 1204 A 20 Without coating 9.5 10 pieces
TJ 1204 B 20 With coating 11 10 pieces

Assembly
TJ 261 A 6 Without coating TR20K TEN11, TEU11 30A 5 10 pieces
TJ 261 B 6 With coating 6 10 pieces
TJ 261 C 6 Bending 5 10 pieces
TJ 262 A 6 Without coating TX20, TXU20, TT20K TXM20, TXUM20 30A 5 10 pieces
TJ 262 B 6 With coating 6 10 pieces
TJ 262 C 6 Bending 5 10 pieces
TJ 263 A 6 Without coating − T20, TL25 30A 5 10 pieces
TJ 263 B 6 With coating 6 10 pieces
TJ 263 C 6 Bending 5 10 pieces
Special Purpose
TJ 762 A 6 Without coating TX7, TXU7 TXM7, TXUM7 20A 2.5 10 pieces
TJ 762 B 6 With coating 3 10 pieces
TJ 762 C 6 Bending 2.5 10 pieces
TJ 7202 A 20 Without coating 8.5 10 pieces
TJ 7202 B 20 With coating 9.5 10 pieces
TJ 7203 B 20 With coating TFP15 TFPM15 20A 9.5 10 pieces
JTJ 224 B 2 With coating TFP40, TTG40, TTG40U TFPM40, TTGM40, TTGM40U 40A 2 10 pieces
JTJ 234 B 3 With coating 3 10 pieces
JTJ 244 B 4 With coating 4 10 pieces
JTJ 254 B 5 With coating 5 10 pieces
JTJ 264 B 6 With coating 6 10 pieces
JTJ 802 B 2 With coating TFP80, TX50, TXU50 TFPM80, TXM50, TXUM50 80A 10 10 pieces
TJ 7201 A 20 Without coating TXJ7 TEN7 20A 7 10 pieces
TJ 7201 B 20 With coating 8.5 10 pieces
Terminal

JTJ 302 B 2 With coating TX30, TXU30, TR30K TXM30, TXUM30, T30, 50A 7 10 pieces
TL35, TEU14
JTJ 602 B 2 With coating TX60, TXU60, TR60K TXM60, TXUM60, TC60 90A 15 10 pieces
JTJ 1002 B 2 With coating TX100, TXU100, TR100K TXM100, TXUM100 130A 34 10 pieces

Designated symbol of coating cover will be in □ of type name. B (black), R (red), S (blue), Y (yellow)

60
 Rail type terminal blocks

Round terminal
No. Applicable terminal block Conducting General Number of
Type name Type mass (g) contents
Line-up

of pins Rail type terminal block Assembled terminal block current

JTJ 124 RB□ 2 With coating TX10S, TXU10S, TXM10S, TXUM10S 20A 1.5 10 pieces
JTJ 164 RB□ 6 With coating TFP20, TTFP203, 3.5
TTFP2035, TTG203,
TTG20U3, TTG2035,
TTG20U35

Designated symbol of coating cover will be in □ of type name. B (black), R (red), S (blue), Y (yellow)
Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Terminal Blocks Block Accessories

Skip one pole

Clutch Lock

No. Applicable terminal block Conducting General Number of

Type name Type mass (g) contents
of pins Rail type terminal block Assembled terminal block current
JTJ 024 B□ 2 With coating TX10S, TXU10S, TXM10S, TXUM10S 20A 3.5 10 pieces
JTJ 084 B□ 8 With coating TFP20, TTFP203, 1.5
TTFP2035, TTG203,
TTG20U3, TTG2035,
TTG20U35
JTJ 022 B□ 2 With coating TX10, TXU10, TR10K TX10, TXUM10 20A 3.5
JTJ 082 B□ 8 With coating 1.5
PLC Interface

Designated symbol of coating cover will be in □ of type name. B (black), R (red), S (blue), Y (yellow)

Unit removal tool

This is a tool that removes the unit attached to IEC rail (TXDA2, TNDS2).
This can be used for TX7 to TX20 and TXU7 to TXU20.
Product name Type name Applicable unit General mass (g) Number of contents
Unit removal tool TXK TX7 to 20, TXU7 to 20 12 1 piece
Rail Type

Rail support
This makes wiring easy by suspending the rail or changing the attachment
angle.
With this, it is possible to attach the terminal block to corner of board or
Assembly

narrow attachment space.

General mass Number of
TRGA TRGB Application Type name per 1 piece (g) contents
type 45° Height 25mm TRGA 30 10 pieces
Trapezium Height 17mm TRGB 25
type Height 50mm TRGC 1 60
Height 90mm TRGC 2 90
Height 130mm TRGC 3 120
Special Purpose

type 30° Height 50mm TRGC 1 A 60

Height 90mm TRGC 2 A 90
Height 130mm TRGC 3 A 120
TRGC1 TRGC1A Remarks:
1. TRGC1A, TRGC2A, and TRGC3A are the one that the rail attachment parts of TRGC1, TRGC2,
and TRGC3 are bent by 30° .
2. As there is a hole of φ 4.3 (prepared hole of M5) is allocated at the neck part of TRGC3 and
TRGC3A, it can be used as an attachment hole of rail or other equipment.
Terminal

61