SCOPE OF ACCREDITATION TO ISO/IEC 17025:2017

EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC.

13501 McCallen Pass
Austin, TX 78753
Greg Kovolenko Phone: 1 410-844-4071
greg.kovolenko@metlabs.com http://www.metlabs.com

ELECTRICAL

Valid to: March 31, 2025 Certificate Number: 0591.06

In recognition of the successful completion of the A2LA evaluation process (including an assessment of
the organization’s compliance with A2LA’s FDA ASCA Accreditation Program5 requirements),
accreditation is granted to this laboratory to perform the following tests EMC, Telecom, Environmental
Simulation and Safety tests:

Test Technology: Test Method(s) 1, 2:

EMC
Radiated and Conducted 47 CFR, FCC Part 15B (using ANSI C63.4:2014);
Emissions 47 CFR, FCC Part 18 (using MP-5:1986);
(up to 40 GHz) ICES-001; ICES-003;

EN 55032; CISPR 32; AS/NZS CISPR 32; KS C 9832;

EN 55022; CISPR 22; AS/NZS CISPR 22; KN 22;
EN 55011; CISPR 11; AS CISPR 11; KS C 9811;

EN 55014-1 (excluding measurements for clicks and disturbance

power measurements (30 MHz to 300 MHz));
KS C 9814-1;
VCCI V-3 (up to 6 GHz); VCCI V-4; VCCI-CISPR 32:2016;
ASMI CNS 13763-1;
AS/NZS 1044 (Appliances only);
IMDA TS EMC;
CNS 13438 (up to 6 GHz);
CNS 15936 (up to 6GHz);
TCVN 7189 (2009); QCVN 118 (2018)

Harmonics and Flicker IEC/EN 61000-3-2; IEC/EN 61000-3-3

Immunity EN/IEC 61000-4-2; KS C 9610-4-2;

EN/IEC 61000-4-3; KS C 9610-4-3;
EN/IEC 61000-4-4; KS C 9610-4-4;
EN/IEC 61000-4-5; KS C 9610-4-5;
EN/IEC 61000-4-6; KS C 9610-4-6;
EN/IEC 61000-4-8; KS C 9610-4-8;
EN/IEC 61000-4-11; KS C 9610-4-11

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 1 of 12

 Test Technology: Test Method(s) 1, 2:

Family Product or Industry IEC/EN 61000-6-1; IEC/EN 61000-6-2;

Specific Specifications IEC/EN 61000-6-3; IEC/EN 61000-6-4;

KS C 9610-6-1; KS C 9610-6-2;
KS C 9610-6-3; KS C 9610-6-4;

ETSI 300 132-2; ETSI EN 300 386;

Telcordia GR-1089;

IEC/EN 60601-1-2; IEC 60601-1-2 Edition 4.0 2014-02;

IEC 60601-1-2 Edition 4.1 2020-09;
IEC/EN 61850-3;
IEC/EN 60601-2-2, -3, -18, -20, -21, -22, -24, -25, -26,
-27, -30, -32, -34, -35, -38, -39, -40, -41, -46;

KS C IEC 60601-1-2;
KS C IEC 60601-2-2, -3, -18, -20, -21, -22, -24, -25, -26, -27, -30,
-32, -34, -35, -38, -39, -40, -41, -46;

IEC/EN 61326-1; IEC/EN 61326-2-1;

IEC/EN 61326-2-2; IEC/EN 61326-2-3;
IEC/EN 61326-2-4; IEC/EN 61326-2-5; IEC/EN 61326-2-6;
IEC/EN 55103-1; IEC/EN 55103-2; IEC/EN 55103-3;
IEC/EN 55103-4; EN 50130-4;
IEC/EN 50491-1; IEC/EN 50491-2; IEC/EN 50491-3;
IEC/EN 50121-1; IEC/EN 50121-2; IEC/EN 50121-3-1;
IEC/EN 50121-3-2; IEC/EN 50121-4; IEC/EN 50121-5;

IEC/EN 12895;

EN 55024; CISPR 24;

EN 55035 (excluding Broadcast Receivers);
CISPR 35 (excluding Broadcast Receivers);

KN 13; KN 19; KN 20; KN 24; KS C 9835;

EN 60945; KS X 3140 (except as noted in table 5);
EN 61131-2;
IMDA TS EMC, Issue 1, Rev. 1 (Mar. 2000);
ISO 7637-1; ISO 7637-2

Intentional Radiators 47 CFR FCC Parts 11, 15 C/E/F/G (using ANSI C63.4:2014, ANSI
(Using ANSI C63.4:2014, ANSI C63.10:2013 and FCC KDB 905462 D02 (v02));
C63.26:2015; ANSI C63.27, and
ANSI C63.10:2013 up to 40 GHz; 47 CFR FCC Parts 22, 24, 25, 27, 90, 95, 97 and 101 (using ANSI
excluding HAC and SAR unless C63.26:2015);
otherwise noted)
ANSI C63.27:2017;

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 2 of 12

 Test Technology: Test Method(s) 1, 2:

Intentional Radiators RSS-111; RSS-112; RSS-117; RSS-119; RSS-123; RSS-125;

(Using ANSI C63.4:2014, ANSI RSS-127; RSS-130; RSS-131; RSS-132; RSS-133; RSS-134;
C63.26:2015; ANSI C63.27, and RSS-135; RSS-137; RSS-139; RSS-140; RSS-141; RSS-142;
ANSI C63.10:2013 up to 40 GHz; RSS-170; RSS-181; RSS-182; RSS-192; RSS-194; RSS-195;
excluding HAC and SAR unless RSS-196; RSS-197; RSS-199; RSS-210; RSS-213; RSS-215;
otherwise noted) (cont.) RSS-216; RSS-220; RSS-222; RSS-236; RSS-238; RSS-243;
RSS-244; RSS-247; RSS-248; RSS-251; RSS-252; RSS-287;
RSS-288; RSS-310; RSS-GEN;

ETSI EN 300 220-2; ETSI EN 300 330-2; ETSI EN 300 440-2;

ETSI EN 300 328; ETSI EN 301 893; ETSI EN 302 065;
ETSI EN 302 195-1; ETSI EN 302 195-2;
ETSI EN 301 511 (spurious emissons only); ETSI EN 301 908-1;
ETSI EN 302 208; ETSI EN 302 291-1; ETSI EN 302 291-2;
ETSI EN 301 489 Series -1 through -35, -50, 51, -52;

Technical Requirements for Telecommunications Terminal

Equipment (RRA Public Notification 2015-24);
Conformity Assessment Procedure for Telecommunications
Terminal Equipment (RRA Announce 2015-104);
Standard Test Procedure on the Technical Requirements for
Telecommunications Terminal Equipment
(RRA Public Notification 2012-17);
Conformity Assessment Procedure of Radio Equipment
(RRA Announce 2015-81);
KS X 3123; Regulations on Radio Equipment
(Ordinance of MSIT No. 86, Jan 4, 2022);
Unlicensed Radio Equipment Established Without Notice
(MSIT Public Notification 2022-75, Dec 30, 2022);
Technical Requirements for the Human Protection against
Electromagnetic Waves
(MSIT Public Notification 2017-7, Aug 24, 2017);
Technical Requirements for Measurement and Test Procedure of
Specific Absorption Rate
(RRA Public Notification 2017-8, Aug 28, 2017);
Technical Requirements of the Other Service Radio Equipment for
Simple radio station, Space Station and Earth Station
(RRA Public Notification 2017-8, Aug 28, 2017);
Technical Requirements for Measurement of Electromagnetic
Field Strength (RRA Public Notification 2017-7, Aug 4, 2017);
Equipment to be subject of Test Procedure for Electromagnetic
Field Strength and Specific Absorption Rate
(MSIT Public Notification 2017-7, Aug 24, 2017);
KS X 3124; KS X 3137; KS X 3125; KN 301 489-4; KS X 3127;
KS X 3128; KN 301 489-7; KN 301 489-8; KS X 3130;
KN 301 489-10; KN 301 489-11;
KN 301 489-12; KS X 3131; KN 301 489-14;
KS X 3136; KN 301 489-16; KS X 3126;
KS X 3132; KN 301 489-19; KS X 3139;

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 3 of 12

 Test Technology: Test Method(s) 1, 2:

Intentional Radiators KN 301 489-21; KN 301 489-22; KN 301 489-23;

(Using ANSI C63.4:2014, ANSI KN 301 489-24; KN 301 489-25; KN 301 489-26;
C63.26:2015; ANSI C63.27, and KS X 3134; KN 301 489-28; KN 301 489-29;
ANSI C63.10:2013 up to 40 GHz; KN 301 489-30; KN 301 489-31; KS X 3138;
excluding HAC and SAR unless AS/NZS 4268;
otherwise noted) (cont.) B1: Specified Radio Equipment specified in Article 38-2-2,
Paragraph 1, item 1 of the Radio Law;
B2: Specified Radio Equipment specified in Article 38-2-2,
Paragraph 1, item 2 of the Radio Law;
B3: Specified Radio Equipment Specified in Article 38-2-2,
Paragraph 1, Item 3 of the Radio Law;
LP0002 (2020)

RF Exposure RSS-102 measurement (RF Exposure);

(excluding SAR and HAC) RSS-102 measurement (NS); SPR-002; IEEE C95.3;
KDB Publication 865664; KDB Publication 447498;
IEC/EN 62311

Product Safety 4 IEC/EN 60950-1 4 (except as noted in table 1); UL 60950-1;

CSA C22.2 No. 301, No. 60950-1; UL/CSA/IEC/EN 60950-22;
16 CFR 1505

IEC/EN 61010-1 4 (except as noted in table 2); UL 61010-1;

CSA C22.2 No. 61010-1; CSA C22.2 No. 205;
IEC/EN/UL 61010-2-010; CSA C22.2 No. 61010-2-010;
IEC/EN/UL 61010-2-032; CSA C22.2 No. 61010-2-032;
IEC/EN/UL 61010-2-051; CSA C22.2 No. 61010-2-051;
IEC/EN/UL 61010-2-061; CSA C22.2 No. 61010-2-061;
IEC/EN/UL 61010-2-081; CSA C22.2 No. 61010-2-081;
IEC/EN/UL 61010-2-101; CSA C22.2 No. 61010-2-101

IEC/EN 60601-14 (except as noted in table 3);

ANSI/AAMI ES60601-1; CSA C22.2 No. 60601-1;
IEC/EN/UL 60601-1-1; CSA C22.2 No. 60601-1-1;
IEC/EN/UL 60601-1-4; CSA C22.2 No. 60601-1-4;
IEC/EN/UL 60601-1-6; CSA C22.2 No. 60601-1-6;
IEC/EN/UL 60601-1-8; CSA C22.2 No. 60601-1-8;
IEC/EN/UL 60601-1-11; CSA C22.2 No. 60601-1-11;
IEC/EN/UL 60601-2-2;
CSA C22.2 No. 60601-2-2 (except as noted in table 4);
IEC/EN/UL 60601-2-3; CSA C22.2 No. 60601-2-3;
IEC/EN/UL 60601-2-4; CSA C22.2 No. 60601-2-4;
IEC/EN/UL 60601-2-10; CSA C22.2 No. 60601-2-10;
IEC/EN/UL 60601-2-18; CSA C22.2 No. 60601-2-18;
IEC/EN/UL 60601-2-22; CSA C22.2 No. 60601-2-22;
IEC/EN/UL 60601-2-23; CSA C22.2 No. 60601-2-23;
IEC/EN/UL 60601-2-25; CSA C22.2 No. 60601-2-25;
IEC/EN/UL 60601-2-26; CSA C22.2 No. 60601-2-26;
IEC/EN/UL 60601-2-27; CSA C22.2 No. 60601-2-27;
IEC/EN/UL 60601-2-34; CSA C22.2 No. 60601-2-34;

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 4 of 12

 Test Technology: Test Method(s) 1, 2:

Product Safety 4 (cont.) IEC/EN/UL 60601-2-35; CSA C22.2 No. 60601-2-35;

IEC/EN/UL 60601-2-36; CSA C22.2 No. 60601-2-36;
IEC/EN/UL 60601-2-38; CSA C22.2 No. 60601-2-38;
IEC/EN/UL 60601-2-40; CSA C22.2 No. 60601-2-40;
IEC/EN/UL 60601-2-49; CSA C22.2 No. 60601-2-49;
IEC/EN/UL 60601-2-52; CSA C22.2 No. 60601-2-52;
IEC/EN/UL 60601-2-57; CSA C22.2 No. 60601-2-57;

UL/CSA/EN/IEC 62368-1;

IEC/EN/UL 60335-1 4 (except as noted in table 6);

CSA C 22.2 No. 60335-1;
IEC/EN/UL 60335-2-24; CSA C22.2 No. 60335-2-24;
IEC/EN 60335-2-36; CSA C22.2 No. 60335-2-36;
IEC/EN 60335-2-42; CSA C22.2 No. 60335-2-42;
IEC/EN 60335-2-49; CSA C22.2 No. 60335-2-49;
IEC/EN 60335-2-80; CSA C22.2 No. 60335-2-80;
IEC/EN/UL 60335-2-89; CSA C22.2 No. 60335-2-89

IEC/EN/UL 62841-1 4 (except as noted in table 8);

CSA C22.2 No. 62841-1
IEC/EN/UL 62841-2-11; CSA C22.2 No. 62841-2-11

UL 201 4 (except as noted in table 9); CSA C22.2 No. 68;

IEC 60601-1-8: Edition 2.2 2020-07;

ANSI AAMI IEC 60601-1-8:2006 + A1:2012;
IEC 60601-1-8: Edition 2.1 2012-11;
IEC 60601-1-11: Edition 2.1 2020-07;

IEC 60601-1-11: Edition 2.0 2015-01;

ANSI AAMI HA60601-1-11:2015;
ANSI AAMI IEC 60601-2-2:2017;
IEC 60601-2-2: Edition 6.0 2017-03;
ANSI AAMI IEC 60601-2-4:2010 + A1:2018;
IEC 60601-2-4: Edition 3.1 2018-02;
IEC 60601-2-18: Edition 3.0 2009-08;
IEC 60601-2-22: Edition 3.1 2012-10;
IEC 60601-2-23: Edition 3.0 2011-02;
ANSI AAMI ISO 60601-2-25: Edition 2.0 2011-10;
IEC 60601-2-25: Edition 2.0 2011-10;
ANSI AAMI IEC 60601-2-27:2011(R) 2016;
IEC 60601-2-27: Edition 3.0 2011-03;
IEC 60601-2-34: Edition 3.0 2011-05;
IEC 60601-2-52: Edition 1.0 2009-12;
IEC 60601-2-57: Edition 1.0 2011-01;
IEC 61010-1: Edition 3.1 2017-01;

IEC/ANSI/AAMI 60601-1-12;
IEC/EN/UL 61010-2-030; CSA C22.2 No. 61010-2-030

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 5 of 12

 Test Technology: Test Method(s) 1, 2:

Enclosure Integrity IEC 60529;

IPX1 and IPX 2;
IPX3 through IPX8(water);
IP1X through IP4X (openings);
IP5X, IP6X (dust)

UL 50E 4 (except as noted in Table 7)

1
When the date, edition, version, etc. is not identified in the scope of accreditation, laboratories may use
the version that immediately precedes the current version for a period of one year from the date of
publication of the standard measurement method, per part C., Section 1 of A2LA R101 - General
Requirements- Accreditation of ISO-IEC 17025 Laboratories.
2
The laboratory is only accredited for testing activities outlined within the test methods listed above.
Reference to any other activity within these standards, such as risk management or risk assessment, does
not fall within the laboratory’s accredited capabilities.

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 6 of 12

 Testing Activities Performed in Support of FCC Certification in Accordance with 47 Code of Federal
Regulations and FCC KDB 974614, Appendix A, Table A.1 3:

Rule Subpart/Technology Test Method Maximum

Frequency
Unintentional Radiators
Part 15B ANSI C63.4:2014 40000 MHz

Industrial, Scientific, and Medical Equipment

Part 18 FCC MP-5 (February 1986) 40000 MHz

Intentional Radiators
Part 15C ANSI C63.10:2013 40000 MHz

U-NII without DFS Intentional Radiators

Part 15E ANSI C63.10:2013 40000 MHz

U-NII with DFS Intentional Radiators

Part 15E FCC KDB 905462 D02 (v02) 40000 MHz

UWB Intentional Radiators

Part 15F ANSI C63.10:2013 40000 MHz

BPL Intentional Radiators

Part 15G ANSI C63.10:2013 40000 MHz

Commercial Mobile Services

(FCC Licensed Radio Service Equipment)
Parts 22 (cellular), 24, 25 (below 3 GHz), and 27 ANSI C63.26:2015 40000 MHz

General Mobile Radio Services

(FCC LicensedRadioServiceEquipment)
Parts 22 (non-cellular), 90 (below 3 GHz), 95, 97 ANSI C63.26:2015 40000 MHz
(below 3 GHz), and 101 (below 3 GHz)

3
Accreditation does not imply acceptance to the FCC equipment authorization program. Please see the
FCC website (https://apps.fcc.gov/oetcf/eas/) for a listing of FCC approved laboratories.

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 7 of 12

 Testing Activities performed under the scope of the U.S FDA ASCA Pilot Program Specifications:
Basic Safety and Essential Performance of Medical Electrical Equipment, Medical Electrical Systems,
and Laboratory Medical Equipment – Standards Specific Information for the Accreditation Scheme for
Conformity Assessment (ASCA) Pilot Program published on September 25th, 2020, and in accordance
with all requirements of A2LA R256 Specific Requirements- FDA ASCA Program 5:

Standards Doc Number

ANSI AAMI ES60601-1:2005/(R)2012 and A1:2012, C1:2009/(R)2012 and
19-46
A2:2010/(R)2012 (Consolidated Text) 4;
IEC 60601-1-8: Edition 2.2 2020-07; 5-131
ANSI AAMI IEC 60601-1-8:2006 + A1:2012; 5-131
IEC 60601-1-8: Edition 2.1 2012-11; 5-76
IEC 60601-1-11: Edition 2.1 2020-07; 19-38
IEC 60601-1-11: Edition 2.0 2015-01; 19-14
ANSI AAMI HA 60601-1-11:2015; 19-16
ANSI AAMI IEC 60601-2-2:2017 4; 6-389
IEC 60601-2-2: Edition 6.0 2017-03 4; 6-389
IEC 60601-2-18: Edition 3.0 2009-08; 9-114
IEC 60601-2-22: Edition 3.1 2012-10; 12-268
IEC 60601-2-23: Edition 3.0 2011-02; 1-87
ANSI AAMI IEC 60601-2-25:2011/(R)2016; 3-105
IEC 60601-2-25: Edition 2.0 2011-10; 3-105
ANSI AAMI IEC 60601-2-27:2011(R) 2016; 3-126
IEC 60601-2-27: Edition 3.0 2011-03; 3-126
IEC 60601-2-34: Edition 3.0 2011-05; 3-115
ANSI AAMI IEC 80601-2-35:2009/A1:2016; 6-390
IEC 80601-2-35: Edition 2.1 2016-04; 6-390
IEC 60601-2-52: Edition 1.0 2009-12; 6-321
IEC 61010-1: Edition 3.1 2017-01 4; 19-34
IEC 60601-1-2 Edition 4.1 2020-09 CONSOLIDATED VERSION 19-36

5
These methods have been assessed by A2LA according to A2LA’s FDA ASCA Program requirements.
Accreditation by A2LA does not imply FDA ASCA-Accreditation. All ASCA-accreditation decisions for
testing laboratory applications are made solely by the FDA, a list of approved laboratories can be found at
FDA.gov.

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 8 of 12

4
Exclusion Tables:
Table #1: Clauses excluded from IEC/EN 60950-1
Standard Clause Test
60950-1
2.3.5 Telecommunication network terminals
2.10.4 Comparative tracking index measurements
2.10.5.4 Partial discharge test (on semiconductors)
2.10.8.4 Abrasion resistance test
3.2.5.1 Flexing test of AC power supply cords
4.2.8 CRT tests
4.3.12 Flammable liquid measurement
4.3.13.2 Ionizing radiation
4.3.13.3 Tests after UV exposure on material
4.3.13.4 Human exposure to UV radiation
4.3.13.5 Laser radiation
4.6.2 Hot flaming oil
Annex AA Mandrel test

Table #2: Clauses excluded from IEC/EN 61010-1

Standard Clause Test
61010-1
6.7.1.2 Test equipment for tracking index
10.5.3 Insulating materials. Test option #2
2.2.1 Ionizing radiation
12.3 UV Radiation
12.4 Microwave Radiation
12.6 Laser sources
13.3 High vacuum devices
14.9 Transient over voltage

Table #3: Clauses excluded from IEC/EN 60601-1

Standard Clause Test
60601-1
8.8.4.2 Resistance to environmental stress
8.9.1.7 Material groups classification
9.5.2 Cathode ray tubes
9.6.3 Hand-transmitted vibration
10.1 X-radiation
10.4 Lasers and light emitting diodes (LEDs)
11.2 Fire prevention
11.3 Constructional requirements for fire enclosures
15.4.2 Temperature and overload control devices
15.4.3.4 Lithium batteries
G Protection against hazards of ignition of flammable
anaesthetic mixtures
L Insulated winding wires for use without interleaved insulation

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 9 of 12

4
Exclusion Tables (cont.):
Table #4: Clauses excluded from IEC/EN/UL 60601-2-2; CSA C22.2 No. 60601-2-2
Standard Clause Test
60601-2-2
201.15.101.5 NE thermal performance
201.15.101.6 NE contact impedance
201.15.101.7 NE adhesion

Table #5: Mechanical tests excluded from EN/KN 60945

Standard Clause Test
EN 60945;
KS X 3140
8.6.2 Drop into water
8.7 Vibration
8.9 Immersion
8.10 Solar radiation
8.11 Oil resistance
8.12 Corrosion (salt mist)

Table #6: Clauses excluded from IEC/EN/UL 60335-1; CSA C22.2 No. 60335-1; IEC/EN/UL 60335-2-
24; CSA C22.2 No. 60335-2-24
Standard Clause Test
IEC/EN/UL
60335-1; CSA
C22.2 No 60335-
1
22.16 Automatic cord reels
22.32 Rubber part – resistance to aging
30.2.1 Glow wire test
Annex B Free-fall test
Annex F Capacitor
Annex H Endurance of test switches
Annex J Coated PCB test
Annex N Proof tracking test apparatus
Annex R Software evaluation
Annex T UV-C radiation test
IEC/EN/UL
60335-2-24; CSA
C22.2 No 60335-
2-24
21.101 Vibration test

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 10 of 12

Table #7: Mechanical tests excluded from UL 50E
Standard Clause Test
UL 50E 8.4.1.1 Dust blast method
8.4.2.1.2 Atomized-water method (Method A)
8.4.2.2.2 Atomized-water method (Method B)
8.9 Immersion
8.4.1.2 Hose method
8.5 External icing test
8.7 Indoor corrosion protection
8.8 Outdoor corrosion protection
8.12 Oil exclusion test
8.13 Gasket tests
8.15 Misalignment tests

Table #8: Clauses excluded from IEC/EN/UL 62841-1; CSA C22.2 No. 62841-1
Standard Clause Test
IEC/EN/UL/CSA
62841-1
13.2 Glow Wire Test

Table #9: Clauses excluded from UL 201

Standard Clause Test
UL 201
80 Wood Flammability Test for Cabinets

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 11 of 12

 MECHANICAL

In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this
laboratory to perform the following tests Explosive Atmosphere tests:

Test Technology: Test Method(s):

Explosive Atmosphere UL/CSA/EN/IEC 60079-0:2011 (excluding Group I and Group II

Small Component Ignition Test, Surface Resistance Test at 30 %RH,
Verification of Ratings of Ventilating Fans, IP5X, IP6X, Resistance
to Light, Resistance to Group I Chemical Agents – Electrical
Equipment, Alternative Qualification of Elastomeric Sealing
O-rings);
UL/CSA/EN/IEC 60079-1:2014;
UL/CSA/EN/IEC 60079-2:2014;
UL/CSA/EN/IEC 60079-5:2007;
UL/CSA/EN/IEC 60079-6:2015;
UL/CSA/EN/IEC 60079-7:2015;
UL/CSA/EN/IEC 60079-11:2011;
UL/CSA/EN/IEC 60079-14:2013;
UL/CSA/EN/IEC 60079-15:2010 (excluding Tests for Enclosed
Break Devices/Non Incendive Components, Test for Screw
Lampholders, Test for Starter Holders for Luminaires, Tests for
Electronic Starts for Tublar Fluorescent Lamps/Ignitors for High
Pressure Sodium or Metal Halide Lamps, Ignition Tests for Large or
High Voltage Machines, Mechanical Shock Test for Batteries)
UL/CSA/EN/IEC 60079-18:2014;
UL/CSA/EN/IEC 60079-26:2014 (ia and ma only);
UL/CSA/EN/IEC 60079-28:2015 (op pr only by assessment);
UL/CSA/EN/IEC 60079-31:2013;
UL/CSA/EN/IEC 80079-36:2016;
UL/CSA/EN/IEC 80079-37:2016

On the following product types:

Electrical Apparatus for Explosive Gas and Dust Atmospheres

(A2LA Certificate No. 0591.06) Revised 09/13/2023 Page 12 of 12

 Accredited Laboratory
A2LA has accredited

EUROFINS ELECTRICAL AND ELECTRONIC TESTING NA, INC.

Austin, TX
for technical competence in the field of

Electrical Testing
This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2017
General requirements for the competence of testing and calibration laboratories. This laboratory also meets the
requirements of R256 – Specific Requirements FDA ASCA Program. This accreditation demonstrates technical
competence for a defined scope and the operation of a laboratory quality management system
(refer to joint ISO-ILAC-IAF Communiqué dated April 2017).

Presented this 24th day of May 2023.

_______________________
Mr. Trace McInturff, Vice President, Accreditation Services
For the Accreditation Council
Certificate Number 0591.06
Valid to March 31, 2025

For the tests to which this accreditation applies, please refer to the laboratory’s Electrical Scope of Accreditation.