ZX210-6

ZX210LC-6

UTILITY EXCAVATORS
 POWERFUL PERFORMANCE.
PROVEN PRODUC
The ZX210-6 and ZX210LC-6 feature a number of
productivity-boosting advantages. A fuel-efficient EPA Final
Tier 4 (FT4)/EU Stage IV Isuzu engine meets rigid emission
standards – no diesel particulate filter (DPF) needed. You
also get an upgraded, wider cab and premium seat options
for maximum comfort. Programmable attachment modes
and optional auxiliary hydraulic lines for versatility.
Easy-to-operate controls for smooth operation. And
efficient, accessible features like a battery disconnect
switch, standard pattern-control switch and fuel shut off.

These workhorses put

PRODUCTIVITY
ON YOUR SIDE.
2
 ZX210-6
ZX210LC-6

UCTIVITY.

3
EFFICIENT FUEL SYSTEM POWER BOOST HIOS III HYDRAULIC SYSTEM AUXILIARY LINES
The pressurized fuel system Muscle through tough digging by The HIOS III hydraulic system Optional auxiliary hydraulic lines
improves fuel injector operation, pressing the power-boost button. balances engine performance with with combination piping increase
and the fuel recirculation system hydraulic flow – returning the arm machine versatility.
helps prevent fuel gelling in cold to dig faster.
climates – so you can maintain
maximum productivity.

4
 ZX210-6
ZX210LC-6

FULLY INTEGRATED.
PROFITABLE PRECISION.
Imagine your best operators made even better with Hitachi’s grade
management solutions. Choose from Solution Linkage 2D or 3D
Grade Control, or opt for Solution Linkage 2D or 3D Grade Guidance
with easy paths for future upgrades.These excavator technology
options offer efficiency for your crew and factory-integrated
precision - backed by your Hitachi dealer, ready to work on day one.

With these excavators, jobs stay

MOVING AHEAD,
NEVER BEHIND.

MEASURABLE RESULTS
Our grade management SOLUTION LINKAGE SOLUTION LINKAGE FULL INTEGRATION
solutions help reduce labor, GRADE CONTROL GRADE GUIDANCE Solution Linkage is fully integrated
enhance speed and reduce Fully integrated Grade Control 2D or 3D Grade Guidance options from the monitor in the cab, to the
the potential for rework provides 3D control. The operator arm operators with elevation and components on the machine. Wire
compared to excavators without controls the arm as the machine position of bucket cutting-edge harnesses are thoughtfully routed
grade-management technology. automatically controls the boom relative to target plane (2D) or and sensors are covered and
and bucket. Additonal features design surface (3D). Indication of protected from damage.
include overdig protection, virtual distance to grade is in real time.
fence and in-cab real-time Upgradeable to automatic control.
distance to target.

5
ZX210-6
ZX210LC-6

COMFORTABLE CAB.
FOCUSED OPERATORS.
The ZX210-6 and ZX210LC-6 keep operators comfortable and
focused on the job. A wider cab and premium seat options provide
maximum comfort. A multifunction LCD monitor, enhanced visibility,
low-effort joysticks and more contribute to daily productivity.

Take a seat in these excavators for

COMFORTABLE
PRODUCTIVITY.

EXTRA LIGHTING
SIMPLE MONITORING SMOOTH OPERATION ALL-AROUND VISIBILITY Optional cab and right-side boom
Multi-language LCD monitor Ergonomically correct short-throw Get unobstructed all-around lights provide extra illumination to
and rotary dial provide intuitive pilot levers provide smooth, visibility thanks to a new hood extend your production.
access to machine info and precise control with less effort. design paired with a wide expanse
functions. Just turn and tap Pushbuttons in the right lever allow of front, side and overhead glass
to select work modes, monitor control of auxiliary hydraulic flow and mirrors.
maintenance intervals, check for attachments. Optional sliding
diagnostic codes and set cab switch provides proportional speed
temperature. A USB port keeps control, giving you full command
you digitally connected. from your fingertips.

6
SINGLE-PEDAL PROPEL PROGRAMMABLE CLIMATE CONTROL PREMIUM SEATING
An optional, hydraulic, single- ATTACHMENT MODE Automatic, high-velocity bi-level Operators get maximum support
pedal propel system allows Toggle between attachments climate-control system with from a sculpted mechanical
straight-line machine tracking and adjust flow and pressure automotive-style adjustable suspension high-back seat. For
without articulating both hand based on attachment louvers helps keep the glass ultimate comfort, opt for the
and foot pedals. requirements right in the clear, the cab comfortable and premium heated/cooled leather
monitor. the operator productive. seat that adjusts three ways and
includes a 3-inch high-visibility
orange seat belt.

7
AUTO-IDLE & AUTO-SHUTDOWN ACCESSIBLE DESIGN NO DPF NEEDED ENGINE AIR PRE-CLEANER
Auto-idle, which reduces engine The standard pattern-control The FT4 engine solution does not An optional, adjustable, rotary
speeds to 800 rpm, and switch, battery disconnect require a DPF, saving service time pre-cleaner pulls clean air into
auto-shutdown contribute switch and fuel shutoff are easily and lowering operating costs. the engine when working in
to fuel efficiency. accessible in the rear door behind tough conditions.
the cab. A composite battery
cover does not require tools to
remove and allows for improved
access to battery service.

8
 ZX210-6
ZX210LC-6

MINIMIZE MAINTENANCE.
MAXIMIZE UPTIME.
Maintenance is minimized with the ZX210-6 and ZX210LC-6 —
from grouped service points to at-a-glance gauges. No diesel
particulate filter (DPF) is needed with the FT4 engine solution.
Convenient upperstructure handrails provide easy engine access.
Extended service intervals help maximize uptime. Scheduled
maintenance is easy to track using ZXLinkTM and the in-cab
diagnostic monitor.

Simple servicing leads to

LOWER OPERATING COSTS.

MONITOR LEVELS
Easy-to-navigate LCD monitor CENTRALIZED SERVICING GROUND-LEVEL CHECKS SAFE ACCESSIBILITY
tracks various fluid levels and Centralized lube banks place Engine oil, fuel and hydraulic Upperstructure handrails provide
issues scheduled maintenance zerks within easy reach, making pilot oil filters are all located on added safety when servicing
alerts and diagnostic information. greasing less messy and the same side at ground level the engine compartment, and
time-consuming. for easy servicing. a larger hood gives you better
engine accessibility.

9
ZX210-6
ZX210LC-6

TOUGHNESS BUILT-IN,
DOWNTIME TOSSED OUT.
Tough jobs are no match for the ZX210-6 and ZX210LC-6. They’re
protected by a heavy-duty undercarriage and durable D-channel
side frames. Added strength comes from welded bulkheads within
the boom that resist torsional stress, tungsten-carbide
thermal-coated arm surfaces and oil-impregnated bushings. The
boom, arm and mainframe are so tough, they’re warranted for three
years or 10,000 hours, whichever comes first.

These excavators give you

DEPENDABLE DURABILITY.

TOUGH SIDE FRAMES PROTECTED JOINTS ROCK-SOLID DURABILITY

Reinforced D-channel side Tungsten-carbide coated Thick-plate single-sheet
frames provide maximum cab and wear surfaces protect the critical mainframe, box-section track
component impact protection. bucket-to-arm joint. frames and double-seal swing
bearing deliver rock-solid
durability.

10
FT4 TECHNOLOGY ADDED UNDERCOVERS LONG-TERM UNDERCARRIAGE CLEAN OPERATION
Our FT4 field-proven technology Standard main frame undercovers With large idlers, rollers and Dust screen prevents plugging,
is simple and efficient, employing and an optional track frame strutted track links, the sealed providing increased reliability.
cooled exhaust gas recirculation undercover provide an extra layer and lubricated undercarriage is
(EGR), a diesel oxidation catalyst of protection. built for the long haul.
(DOC) and selective catalytic
reduction (SCR). An improved
piston design allows particulate
matter to be burned in cylinder,
so there’s no need for a diesel
particulate filter (DPF).

11
SPECIFICATIONS

ZX210-6
ZX210LC-6

Engine ZX210-6 / ZX210LC-6

Manufacturer and Model Isuzu 4HK1
Non-Road Emission Standards EPA Final Tier 4 / EU Stage IV
Net Rated Power (ISO 9249) 119 kW (160 hp) @ 2,000 rpm
Cylinders 4
Displacement 5.19 L (317 cu in.)
Off-Level Capacity 70% (35 deg.)
Aspiration Turbocharged, air-to-air charge-air cooler
Cooling
High-efficiency, direct-driven, suction-type fan
Powertrain
2-speed propel with automatic shift
Maximum Travel Speed
Low 3.5 km/h (2.2 mph)
High 5.5 km/h (3.4 mph)
Drawbar Pull 20 700 kg (45,636 lb.)
Hydraulics
Open center, pilot controlled
Main Pumps 2 variable-displacement axial piston pumps
Maximum Rated Flow 212 L/m (56 gpm) x 2
Pilot Pump 1 gear
Maximum Rated Flow 30.0 L/m (7.9 gpm)
Pressure Setting 4000 kPa (580 psi)
System Operating Pressure
Circuits
  Implement 34 300 kPa (4,975 psi)
  Travel 35 500 kPa (5,149 psi)
  Swing 33 300 kPa (4,830 psi)
Power Boost 38 000 kPa (5,511 psi)
Controls Pilot levers, short-stroke, low-effort hydraulic pilot controls with shutoff lever
Cylinders
Bore Rod Diameter Stroke
Boom (2) 120 mm (4.7 in.) 85 mm (3.3 in.) 1260 mm (49.6 in.)
Arm (1) 135 mm (5.3 in.) 95 mm (3.7 in.) 1475 mm (58.1 in.)
Bucket (1) 115 mm (4.5 in.) 80 mm (3.1 in.) 1060 mm (41.7 in.)
Electrical
Number of Batteries (12 volt) 2
Battery Capacity 1,000 CCA
Alternator Rating 50 amp
Work Lights 2 halogen (1 mounted on boom, 1 on frame)
Undercarriage ZX210-6 ZX210LC-6
Rollers (each side)
Carrier 2 2
Track 7 8
Shoes, Triple Semi-Grouser (each side) 46 49
Track
Adjustment Hydraulic Hydraulic
Guides Center Center
Chain Sealed and lubricated Sealed and lubricated

12
Ground Pressure ZX210-6 ZX210LC-6
600-mm (24 in.) Triple Semi-Grouser Shoes 37.3 kPa (5.41 psi) 34.0 kPa (4.93 psi)
700-mm (28 in.) Triple Semi-Grouser Shoes 42.0 kPa (6.09 psi) 38.9 kPa (5.64 psi)
800-mm (32 in.) Triple Semi-Grouser Shoes 48.2 kPa (6.99 psi) 43.9 kPa (6.37 psi)
Swing Mechanism
Speed 13.3 rpm
Torque 68 900 Nm (50,662 lb.-ft.)
Serviceability
Refill Capacities
Fuel Tank 403 L (106 gal.)
Diesel Exhaust Fluid (DEF) Tank 57 L (15 gal.)
Cooling System 28 L (30 qt.)
Engine Oil with Filter 23 L (24 qt.)
Hydraulic Tank 135 L (36 gal.)
Hydraulic System 240 L (63 gal.)
Gearbox
  Swing 6.2 L (6.6 qt.)
  Propel (each) 7.8 L (8.2 qt.)
  Pump Drive 1.0 L (1.1 qt.)
Operating Weights ZX210-6 ZX210LC-6
With full fuel tank; 79-kg (175 lb.) operator; 1065-mm (42 in.), 0.91-m3 (1.19 cu. yd.), 886-kg (1,951 lb.) general-purpose bucket; 2.91-m (9 ft. 7 in.) arm; 4250-kg (9,370 lb.)
counterweight
Operating Weight
600-mm (24 in.) Triple Semi-Grouser Shoes 20 862 kg (45,993 lb.) 21 268 kg (46,888 lb.)
700-mm (28 in.) Triple Semi-Grouser Shoes 21 202 kg (46,742 lb.) 21 658 kg (47,748 lb.)
800-mm (32 in.) Triple Semi-Grouser Shoes 21 501 kg (47,402 lb.) 21 971 kg (48,438 lb.)
Optional Components
Undercarriage with Triple Semi-Grouser Shoes
   600-mm (24 in.) 6929 kg (15,262 lb.) 7335 kg (16,156 lb.)
   700-mm (28 in.) 7269 kg (16,011 lb.) 7725 kg (17,015 lb.)
   800-mm (32 in.) 7568 kg (16,670 lb.) 8038 kg (17,705 lb.)
One-Piece Boom (with arm cylinder) 1731 kg (3,813 lb.) 1731 kg (3,813 lb.)
Arm with Bucket Cylinder and Linkage
2.42 m (7 ft. 3 in.) 935 kg (2,059 lb.) 935 kg (2,059 lb.)
2.91 m (9 ft. 7 in.) 1001 kg (2,205 lb.) 1001 kg (2,205 lb.)
Boom Lift Cylinders (2) Total Weight 354 kg (780 lb.) 354 kg (780 lb.)

13
SPECIFICATIONS

ZX210-6
ZX210LC-6

Operating Dimensions ZX210-6 ZX210LC-6

Arm Length 2.42 m (7 ft. 11 in.) 2.91 m (9 ft. 7 in.)
Arm Digging Force
  SAE 133 kN (29,900 lb.) 110 kN (24,729 lb.)
  ISO 140 kN (31,743 lb.) 114 kN (25,628 lb.)
Bucket Digging Force
  SAE 141 kN (31,698 lb.) 141 kN (31,698 lb.)
  ISO 158 kN (35,520 lb.) 158 kN (35,520 lb.)
A Maximum Reach 9.43 m (30 ft. 11 in.) 9.92 m (32 ft. 7 in.)
A1 Maximum Reach at Ground Level 9.25 m (30 ft. 4 in.) 9.75 m (32 ft.)
B Maximum Digging Depth 6.18 m (20 ft. 3 in.) 6.67 m (21 ft. 11 in.)
B1 Maximum Digging Depth at
2.44-m (8 ft.) Flat Bottom 5.95 m (19 ft. 6 in.) 6.50 m (21 ft. 4 in.)
C Maximum Cutting Height 9.67 m (31 ft. 9 in.) 10.04 m (32 ft. 11 in.)
D Maximum Dumping Height 6.83 m (22 ft. 5 in.) 7.18 m (23 ft. 7 in.)
E Minimum Swing Radius 3.18 m (10 ft. 5 in.) 3.18 m (10 ft. 5 in.)
F Maximum Vertical Wall 5.30 m (17 ft. 5 in.) 5.99 m (19 ft. 8 in.)

E CENTERLINE OF SWING

C D

GROUND LINE
A1
A
B B1 F

14
Machine Dimensions ZX210-6 ZX210LC-6
A Overall Length
2.42-m (7 ft. 11 in.) arm 9.75 m (32 ft.) 9.75 m (32 ft.)
2.91-m (9 ft. 7 in.) arm 9.53 m (31 ft. 3 in.) 9.66 m (31 ft. 8 in.)
B Overall Height
2.42-m (7 ft. 11 in.) arm 3.18 m (10 ft. 5 in.) 3.18 m (10 ft. 5 in.)
2.91-m (9 ft. 7 in.) arm 3.01 m (9 ft. 11 in.) 3.01 m (9 ft. 11 in.)
C Rear-End Length/Swing Radius 2.89 m (9 ft. 6 in.) 2.89 m (9 ft. 6 in.)
D Distance Between Idler/Sprocket Centerline 3.35 m (11 ft.) 3.66 m (12 ft.)
E Undercarriage Length 4.17 m (13 ft. 8 in.) 4.47 m (14 ft. 8 in.)
F Counterweight Clearance 1030 mm (3 ft. 5 in.) 1030 mm (3 ft. 5 in.)
G Upperstructure Width 2.71 m (8 ft. 11 in.) 2.71 m (8 ft. 11 in.)
H Cab Height 2.95 m (9 ft. 8 in.) 2.95 m (9 ft. 8 in.)
I Track Width 600 mm (24 in.) 600 mm (24 in.)
w/ Triple Semi-Grouser Shoes 700 mm (28 in.) 700 mm (28 in.)
800 mm (32 in.) 800 mm (32 in.)
J Gauge Width 2.22 m (7 ft. 3 in.) 2.39 m (7 ft. 10 in.)
K Ground Clearance 450 mm (18 in.) 450 mm (18 in.)
L Overall Width with Triple Semi-Grouser Shoes
600 mm (24 in.) 2.82 m (9 ft. 3 in.) 2.99 m (9 ft. 10 in.)
700 mm (28 in.) 2.92 m (9 ft. 7 in.) 3.09 m (10 ft. 2 in.)
800 mm (32 in.) 3.02 m (9 ft. 11 in.) 3.19 m (10 ft. 6 in.)

G C

H B F

K D
J I
E
L A

15
SPECIFICATIONS

ZX210-6
ZX210LC-6

Lift Charts ZX210-6

Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). All lift capacities are based on ISO 10567 (with power boost). Ratings at bucket lift hook; machine equipped with standard counterweight and
standard gauge; and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.
Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.)
Horizontal Distance from
Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
With 2.42-m (7 ft. 11 in.) arm, 666-kg (1,468 lb.) bucket and 800-mm (32 in.) shoes
6.0 m (20 ft.) 5170 4570
(11,380) (9,800)
4.5 m (15 ft.) 6760 6760 5650 4420
(20,290) (20,290) (14,560) (14,560) (12,290) (9,510)
3.0 m (10 ft.) 8630 6520 6460 4200 4620 2910
(18,560) (14,080) (13,990) (9,040) (9,920) (6,240)
1.5 m (5 ft.) 10 140 6100 6420 3990 4510 2810
(21,880) (13,150) (13,810) (8,590) (9,710) (6,050)
Ground Line 9980 5910 6270 3850 4450 2750
(21,410) (12,730) (13,480) (8,300) (9,570) (5,920)
–1.5 m (–5 ft.) 9330 9330 9950 5890 6230 3820
(21,390) (21,390) (21,360) (12,680) (13,400) (8,220)
–3.0 m (–10 ft.) 12 640 11 810 9150 6000 6320 3900
(27,400) (19,750) (12,910) (13,620) (8,420)
–4.5 m (–15 ft.) 6300 6280
(13,030) (13,030)
With 2.91-m (9 ft. 7 in.) arm, 666-kg (1,468 lb.) bucket and 600-mm (24 in.) shoes
6.0 m (20 ft.) 4650 4530
(10,210) (9,720)
4.5 m (15 ft.) 6030 6030 5200 4370 4610 2940
(13,010) (13,010) (11,310) (9,400) (9,890) (6,300)
3.0 m (10 ft.) 7950 6510 6070 4140 4500 2840
(17,100) (14,040) (13,150) (8,910) (9,670) (6,100)
1.5 m (5 ft.) 9680 6030 6270 3910 4380 2730
(20,880) (12,990) (13,480) (8,410) (9,420) (5,860)
Ground Line 4270 4270 9720 5770 6090 3740 4290 2640
(9,930) (9,930) (20,860) (12,420) (13,090) (8,060) (9,220) (5,680)
–1.5 m (–5 ft.) 4900 4900 8520 8520 9630 5700 6010 3670 4260 2620
(11,010) (11,010) (19,440) (19,440) (20,670) (12,250) (12,920) (7,910) (9,170) (5,640)
–3.0 m (–10 ft.) 9390 9390 13 810 11 360 9650 5760 6050 3710
(21,140) (21,140) (29,920) (24,350) (20,830) (12,390) (13,020) (7,990)
–4.5 m (–15 ft.) 10 680 10 680 7540 5960
(22,820) (22,820) (16,000) (12,860)
With 2.91-m (9 ft. 7 in.) arm, 666-kg (1,468 lb.) bucket and 700-mm (28 in.) shoes
6.0 m (20 ft.) 4650 4600
(10,210) (9,890)
4.5 m (15 ft.) 6030 6030 5200 4450 4710 3000
(13,010) (13,010) (11,310) (9,560) (10,090) (6,420)
3.0 m (10 ft.) 7950 6620 6070 4210 4600 2900
(17,100) (14,280) (13,150) (9,070) (9,870) (6,220)
1.5 m (5 ft.) 9680 6140 6390 3980 4470 2790
(20,880) (13,230) (13,750) (8,570) (9,620) (5,980)
Ground Line 4270 4270 9910 5880 6210 3820 4380 2700
(9,930) (9,930) (21,270) (12,650) (13,360) (8,220) (9,420) (5,810)
–1.5 m (–5 ft.) 4900 4900 8520 8520 9830 5810 6130 3750 4350 2680
(11,010) (11,010) (19,440) (19,440) (21,080) (12,490) (13,190) (8,070) (9,380) (5,760)
–3.0 m (–10 ft.) 9390 9390 13 810 11 560 9650 5870 6170 3780
(21,140) (21,140) (29,920) (24,780) (20,840) (12,620) (13,290) (8,150)
–4.5 m (–15 ft.) 10 680 10 680 7540 6070
(22,820) (22,820) (16,000) (13,100)
With 2.91-m (9 ft. 7 in.) arm, 666-kg (1,468 lb.) bucket and 800-mm (32 in.) shoes
6.0 m (20 ft.) 4650 4640
(10,210) (9,960)
4.5 m (15 ft.) 6030 6030 5200 4480 4750 3020
(13,010) (13,010) (11,310) (9,640) (10,190) (6,480)
3.0 m (10 ft.) 7950 6670 6070 4250 4640 2920
(17,100) (14,380) (13,150) (9,140) (9,970) (6,280)
1.5 m (5 ft.) 9680 6180 6450 4010 4520 2810
(20,880) (13,330) (13,880) (8,640) (9,710) (6,040)
Ground Line 4270 4270 10 000 5920 6270 3850 4420 2730
(9,930) (9,930) (21,460) (12,760) (13,480) (8,290) (9,520) (5,860)
–1.5 m (–5 ft.) 4900 4900 8520 8520 9910 5850 6190 3780 4400 2700
(11,010) (11,010) (19,440) (19,440) (21,270) (12,590) (13,320) (8,140) (9,470) (5,820)
–3.0 m (–10 ft.) 9390 9390 13 810 11 650 9650 5910 6230 3820
(21,140) (21,140) (29,920) (24,970) (20,840) (12,730) (13,410) (8,220)
–4.5 m (–15 ft.) 10 680 10 680 7540 6120
(22,820) (22,820) (16,000) (13,200)

16
Lift Charts ZX210LC-6
Boldface type indicates hydraulically limited capacity; lightface type indicates stability-limited capacities, in kg (lb.). All lift capacities are based on ISO 10567 (with power boost). Ratings at bucket lift hook; machine equipped with standard counterweight and
standard gauge; and situated on firm, uniform supporting surface. Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine.
Load Point Height 1.5 m (5 ft.) 3.0 m (10 ft.) 4.5 m (15 ft.) 6.0 m (20 ft.) 7.5 m (25 ft.)
Horizontal Distance from
Centerline of Rotation Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
With 2.42-m (7 ft. 11 in.) arm, 666-kg (1,468 lb.) bucket and 800-mm (32 in.) shoes
6.0 m (20 ft.) 5170 5100
(11,380) (10,950)
4.5 m (15 ft.) 6760 6760 5650 4950
(20,290) (20,290) (14,560) (14,560) (12,290) (10,660)
3.0 m (10 ft.) 8630 7370 6460 4730 5270 3290
(18,560) (15,890) (13,990) (10,180) (11,330) (7,060)
1.5 m (5 ft.) 10 140 6930 7230 4510 5170 3190
(21,880) (14,930) (15,650) (9,720) (11,110) (6,870)
Ground Line 10 660 6740 7220 4380 5100 3130
(23,090) (14,500) (15,520) (9,420) (10,970) (6,740)
–1.5 m (–5 ft.) 9330 9330 10 330 6720 7180 4340
(21,390) (21,390) (22,390) (14,450) (15,430) (9,350)
–3.0 m (–10 ft.) 12 640 12 640 9150 6820 6580 4420
(27,400) (27,400) (19,750) (14,690) (14,030) (9,550)
–4.5 m (–15 ft.) 6300 6300
(13,030)
With 2.91-m (9 ft. 7 in.) arm, 666-kg (1,468 lb.) bucket and 600-mm (24 in.) shoes
6.0 m (20 ft.) 4650 4650
(10,210) (10,210)
4.5 m (15 ft.) 6030 6030 5200 4870 4820 3300
(13,010) (13,010) (11,310) (10,480) (10,560) (7,070)
3.0 m (10 ft.) 7950 7310 6070 4630 5120 3200
(17,100) (15,750) (13,150) (9,980) (11,000) (6,870)
1.5 m (5 ft.) 9680 6810 6940 4400 4990 3080
(20,880) (14,670) (15,030) (9,470) (10,730) (6,630)
Ground Line 4270 4270 10 540 6540 6980 4230 4900 3000
(9,930) (9,930) (22,810) (14,080) (15,000) (9,110) (10,540) (6,450)
–1.5 m (–5 ft.) 4900 4900 8520 8520 10 510 6470 6900 4160 4870 2970
(11,010) (11,010) (19,440) (19,440) (22,760) (13,910) (14,830) (8,950) (10,490) (6,400)
–3.0 m (–10 ft.) 9390 9390 13 810 13 120 9650 6530 6940 4190
(21,140) (21,140) (29,920) (28,090) (20,840) (14,050) (14,930) (9,040)
–4.5 m (–15 ft.) 10 680 10 680 7540 6740
(22,820) (22,820) (16,000) (14,540)
With 2.91-m (9 ft. 7 in.) arm, 666-kg (1,468 lb.) bucket and 700-mm (28 in.) shoes
6.0 m (20 ft.) 4650 4650
(10,210) (10,210)
4.5 m (15 ft.) 6030 6030 5200 4950 4820 3360
(13,010) (13,010) (11,310) (10,650) (10,560) (7,210)
3.0 m (10 ft.) 7950 7430 6070 4720 5180 3260
(17,100) (16,010) (13,150) (10,150) (11,210) (7,000)
1.5 m (5 ft.) 9680 6930 6940 4480 5090 3150
(20,880) (14,930) (15,030) (9,640) (10,950) (6,760)
Ground Line 4270 4270 10 540 6660 7120 4310 5000 3060
(9,930) (9,930) (22,810) (14,340) (15,300) (9,280) (10,750) (6,580)
–1.5 m (–5 ft.) 4900 4900 8520 8520 10 510 6590 7040 4240 4970 3030
(11,010) (11,010) (19,440) (19,440) (22,760) (14,170) (15,130) (9,130) (10,700) (6,530)
–3.0 m (–10 ft.) 9390 9390 13 810 13 340 9650 6650 7010 4280
(21,140) (21,140) (29,920) (28,570) (20,840) (14,310) (15,070) (9,220)
–4.5 m (–15 ft.) 10 680 10 680 7540 6860
(22,820) (22,820) (16,000) (14,800)
With 2.91-m (9 ft. 7 in.) arm, 666-kg (1,468 lb.) bucket and 800-mm (32 in.) shoes
6.0 m (20 ft.) 4650 4650
(10,210) (10,210)
4.5 m (15 ft.) 6030 6030 5200 5010 4820 3410
(13,010) (13,010) (11,310) (10,790) (10,560) (7,310)
3.0 m (10 ft.) 1950 7520 6070 4780 5180 3310
(17,100) (16,200) (13,150) (10,290) (11,290) (7,100)
1.5 m (5 ft.) 9680 7020 6940 4540 5170 3190
(20,880) (15,120) (15,030) (9,780) (11,110) (6,860)
Ground Line 4270 4270 10 540 6750 7220 4370 5080 3110
(9,930) (9,930) (22,810) (14,530) (15,520) (9,410) (10,920) (6,680)
–1.5 m (–5 ft.) 4900 4900 8520 8520 15 100 6680 7140 4300 5050 3080
(11,010) (11,010) (19,440) (19,440) (22,760) (14,360) (15,350) (9,260) (10,870) (6,630)
–3.0 m (–10 ft.) 9390 9390 13 810 13 510 9650 6740 7010 4340
(21,140) (21,140) (29,920) (28,930) (20,840) (14,500) (15,070) (9,350)
–4.5 m (–15 ft.) 10 680 10 680 7540 6950
(22,820) (22,820) (1,600) (14,990)

17
SPECIFICATIONS

ZX210-6
ZX210LC-6

Buckets ZX210-6 / ZX210LC-6

A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Buckets are equipped with ESCO teeth standard. Replaceable cutting edges and a variety of teeth are available through Hitachi parts. Optional
side cutters add 150 mm (6 in.) to bucket widths. Capacities are SAE heaped ratings.
Arm Dig Force Arm Dig Force Number
Type Bucket Bucket Width Bucket Capacity Bucket Weight Bucket Dig Force 2.42 m (7 ft. 11 in.) 2.91 m (9 ft. 7 in.) Bucket Tip Radius of Teeth
mm in. m3 cu. yd. kg lb. kN lb. kN lb. kN lb. mm in.
Heavy Duty 914 36 0.69 0.9 631 1,391 160.5 36,091 139.8 31,435 114.2 25,669 1456 57 5
1067 42 0.83 1.09 695 1,532 161.2 36,230 140.0 31,482 114.3 25,702 1451 57 5
1219 48 0.99 1.29 763 1,681 161.2 36,248 140.1 31,487 114.4 25,707 1450 57 6
Heavy Duty High Capacity 610 24 0.43 0.56 602 1,325 160.3 36,035 139.8 31,417 114.1 25,655 1458 57 4
914 36 0.74 0.97 756 1,665 160.3 36,041 139.8 31,417 114.1 25,655 1458 57 5
1067 42 0.91 1.19 853 1,878 160.3 36,041 139.8 31,417 114.1 25,655 1458 57 5
Bucket Selection Guide*

3 2,7
(3,5)
TAILLE DU GODET m3 (vg3)

2,3
(3,0)

1,9
(2,5) Bras de 2,42 m (7 pi 11 po) Hitachi
1,5
(2,0)

1,0 Bras de 2,91 m (9 pi 7 po) Hitachi

(1,5)

0,8
(1,0)
lb/vg3 1 200 1 400 1 600 1 800 2 000 2 200 2 400 2 600 2 800 3 000 3 200 3 400
kg/m 3 700 800 900 1 000 1 100 1 200 1 300 1 400 1 500 1 600 1 700 1 800 1 900 2 000
Argile humide, Granite

Sable mouillé, Gravier

Tourbe mouillée

Terre mouillée

Sable humide

Sable mouillé
Terre arable

Argile sèche
Sable sec
Charbon

Calcaire
Schiste
Caliche

*Communiquez avec votre concessionnaire Hitachi pour une sélection optimale de godets et d'accessoires. Ces recommandations sont faites en fonction d'une utilisation moyenne
dans des conditions générales. Ne comprend pas les équipements en option tels que les pouces et les coupleurs. Il est possible d'utiliser des godets plus larges avec des
matériaux légers, des travaux à plat et à niveau, des matériaux moins compactés et des applications de chargement comme l’excavation intensive dans des conditions idéales. Il
est recommandé d'utiliser les petits godets pour les conditions défavorables telles que les applications à ras, les terrains rocailleux et les surfaces accidentées. La capacité du
godet indiquée est SAE comble.

18
 ADDITIONAL EQUIPMENT

ZX210-6
ZX210LC-6

Key: l Standard s Optional or special kit

210 Engine 210 Upperstructure 210 Operator’s Station (Continued)

l Auto-idle system l Right-hand, left-hand, and counterweight mirrors l Multifunction, color LCD monitor with:
l Batteries (2 – 12 volt) l Vandal locks with ignition key: Cab door / Diagnostic capability / Multiple-language
l Coolant recovery tank Service doors / Toolbox capabilities / Maintenance tracking / Clock /
l Dual-element dry-type air filter l Debris screen System monitoring with alarm features:
l Electronic engine control l Remote-mounted engine oil and fuel filters Auto-idle indicator, engine-air-cleaner-restriction
l Enclosed fan guard (conforms to SAE J1308) l Service handrails indicator light, engine check,
l Engine coolant to –37 deg. C (–34 deg. F) Front Attachments engine-coolant-temperature indicator light
l Fuel filter with water separator l Centralized lubrication system with audible alarm, engine-oil-pressure
l Fuel shut-off valve l Dirt seals on all bucket pins indicator light with audible alarm, low-alternator-
l Full-flow oil filter l Less boom and arm charge indicator light, low-fuel
l Turbocharger with charge air cooler l Oil-impregnated bushings indicator light, low DEF indication with
l 500-hour engine-oil-change interval l Reinforced resin thrust plates audible alarm, fault-code-alert indicator,
l 70% (35 deg.) off-level capability l Tungsten carbide thermal coating on fuel-rate display, wiper-mode indicator,
l Programmable auto shutdown arm-to-bucket joint work-lights-on indicator and work-mode
l Engine-oil-sampling valve s Arm, 2.42 m (7 ft. 11 in.) indicator
s Engine air pre-cleaner s Arm, 2.91 m (9 ft. 7 in.) l Motion alarm with cancel switch (conforms to
s Chrome exhaust stack s Attachment quick-couplers SAE J994)
s Engine coolant heater s Boom cylinder with plumbing to mainframe l Power-boost switch on right console lever

Hydraulic System less boom and arm l Auxiliary hydraulic control switches in right
l Reduced-drift valve for boom down, arm in s Buckets: Ditching / Heavy duty / Heavy-duty high console lever
l Auxiliary hydraulic valve section capacity / Side cutters and teeth l SAE 2-lever control pattern
l Spring-applied, hydraulically released s Material clamps l Seat belt, 76 mm (3 in.), non-retractable

automatic swing brake s Super-long fronts l Tinted glass

l Auxiliary hydraulic-flow adjustments Operator’s Station l Transparent, tinted overhead hatch
through monitor l Meets ISO 12117-2 for ROPS l Hot/cold beverage compartment
l Auto power lift l Adjustable independent-control positions l USB charging port
l 5,000-hour hydraulic oil change interval (levers-to-seat, seat-to-pedals) s Adjustable flow and pressure in monitor
l Auxiliary hydraulic lines with proportional control l AM/FM radio s Air-suspension heated seat
on Rh pilot lever l Auto climate control / air conditioner / heater / s Premium heated/cooled leather seat
l Hydraulic-oil-sampling valve pressurizer s Hydraulic-oil-filter-restriction indicator light
l Control pattern-change valve l Built-in Operator’s Manual storage compartment s Protection screens for cab front, rear and side
l HIOS III hydraulic management system and manual s Window vandal-protection covers
s Auxiliary hydraulics with combination piping l Cell-phone power outlet, 12 volt, 60 watt, 5 amp s In-monitor adjustable flow and pressure auxiliary
s Auxiliary pilot and electric controls l Coat hook hydraulics with AFL
s High-flow auxiliary hydraulic lines with dual stop l Deluxe suspension cloth seat with 100-mm (4 in.) Grade Management
valves adjustable armrests s Solution Linkage 2D Grade Guidance
s Dual pump flow combiner l Floor mat s Solution Linkage 3D Grade Guidance
s Hydraulic filter-restriction indicator kit l Front windshield wiper with intermittent speeds s Solution Linkage 2D Grade Control
s Load-lowering control device l Gauges (illuminated): Diesel Exhaust Fluid (DEF) / s Solution Linkage 3D Grade Control
s Single-pedal propel control Engine coolant / Fuel With or without laser receiver
s Electrical
Undercarriage l Horn, electric l 50-amp alternator
l Planetary drive with axial piston motors l Hour meter, electric l Blade-type multi-fused circuits
l Propel motor shields l Hydraulic shutoff lever, all controls l Positive-terminal battery covers
l Spring-applied, hydraulically released automatic l Hydraulic warm-up control l Battery disconnect switch
propel brake l Interior light l ZXLink™ wireless communication system
l Track guides, front idler and center l Large cup holder (available in specific countries; see your dealer
l 2-speed propel with automatic shift l Machine Information Center (MIC) for details)
l Upper carrier rollers (2) l Mode selectors (illuminated): l Rearview camera
l Sealed and lubricated track chain Power modes (3) / Travel modes (2 with automatic s Cab extension wiring harness
l Heavey-duty undercover shift) / Work mode (1) Lights
s Triple semi-grouser shoes, 600 mm (24 in.) l Work lights: Halogen / 1 mounted on boom /
s Triple semi-grouser shoes, 700 mm (28 in.) 1 mounted on frame
s Triple semi-grouser shoes, 800 mm (32 in.) s 2 lights mounted on cab / 1 mounted on right side of
boom / 1 mounted under engine hood

Net engine power is with standard equipment including air cleaner, exhaust system, alternator and cooling fan, at test conditions specified per ISO 9249. No derating is required up to 2000-m (6,560 ft.) altitude.
Specifications and design subject to change without notice. Wherever applicable, specifications are in accordance with SAE standards. Except where otherwise noted, these specifications are based on units with 2.91-m (9 ft. 7 in.) arms;
1065-mm (42 in.), 0.91-m 3 (1.19 cu. yd.), 853-kg. (1,878 lb.) heavy-duty buckets; 4250-kg (9,370 lb.) counterweights; full fuel tanks; 79-kg (175 lb.) operators; and a ZX210LC-6 unit with 800-mm (32 in.) triple semi-grouser shoes.

19
 HitachiConstruction.com
Hitachi Construction & Mining Division
DKZX2106HT Litho in U.S.A. (21-05) 1300 River Drive • Moline, IL 61265