IDS Secondary Retention Picturebook Worksheet

Picture Correct Picture? Action Required (Drawing # / Corrected

Description
No Yes No Redesign / Instructions)

Differencial pressure switch sensor

cover bolts, lockwashers, and lockwired
58 X (A/R) Z6001 Lockwire 0.051
Differencial pressure switch cover
secured with lockwire

General
Air solenoid valve coil cover secured Insert grub screw to keep valve
59 X
with grub screw cap from backing off

Switch and J box saddle jam screws

60 X (1) 51804-C Nut, self-locking
secured with self-locking nut

* Suggested Retention Change Page 20 3QA000118

 IDS Secondary Retention Picturebook Worksheet

Picture Correct Picture? Action Required (Drawing # / Corrected

Description
No Yes No Redesign / Instructions)

(3) 50604-8-B Screw, flat

(6) 50604-B Nut, Hx Head
Earth bar bolts, lockwashers, and
(3) 87074-04 Washer, lock-star
lockwired (for Ex only)
(3) 50804-R-B Washer, flat
All earth cables secured with either two
61 X (1) 50606-12-B Screw, flat
nuts or self-locking nut
(2) 50206-B Nut, Hx Head
Dwg 86874 Sheet 1, Zone B/3 & B/4
(1) 87074-06 Washer, lock-star
BOM items 2, 3, 4, 5, 6, 7, 8, 9
(1) 50806-R-B Washer, flat
(A/R) Z6001 Lockwire 0.051

Rotating head cylinder bracket bolts, (1) 50012-60-C5 Bolt

lockwashers, and lockwired (4) 50012-18-C5 Bolt
62 X
Dwg 79690, Sheet 2 Zone C/5 (5) 50912-C Washer, lock
BOM Items 30, 31, 35, 68 (A/R) Z6001 Lockwire 0.051Ø

Rotating head Auto return cylinder pins, (2) 82049 Pin, Cam cylinder
washer, castle nut, and cotter pin (2) 50508-C Nut, Hex slotted
63 X
Dwg 79690, Sheet 2, Zone B/4 (2) 51433-12-C Pin, cotter
BOM items: 1, 62, 63, 66 (2) 50808-R-C Washer, flat

* Suggested Retention Change Page 21 3QA000118

 IDS Secondary Retention Picturebook Worksheet

Picture Correct Picture? Action Required (Drawing # / Corrected

Description
No Yes No Redesign / Instructions)

Rotating head handle split pin and (1) 82062-1 Pin, pivot
washer as per Tech Bulletin TDS 93-19 REF: 79896-1 handle, locking
64 X
Dwg 79690 Sheet 2, Zone C/3 (1) 50808-N-S Washer, flat
BOM items 38, 18, 69, 60 (1) 51402-12-S Pin, cotter

Rotating head cam follower nut

lockwired to carrier - Drill roller arm if
(1) 55317 Nut, Hex Jam
65 needed X
(1) 50916-C Washer, lock
Dwg 79690 Sheet 2, Zone A/4
BOM items 36, 37

Solid body elevator plate (500 ton) wear

bushings bolts, lockwashers, and (8) 50010-12-C8D Screw, Cap
lockwired Hex HD
Dwg 97256 Sheet 1, Zone C/3 (8) 50910-C Washer, lock
(A/R) Z6001 Lockwire 0.051Ø
66 Solid body elevator plate (500 ton) X
secured to torque arrestors with bolts, (4) 50010-20-C5D Screw, Cap
lockwashers,and lockwired Hex HD
Dwg 105855 Sheet 2, for PH-60 (4) 50910-C Washer, lock
Dwg 95496 for PH-85 (A/R) Z6001 Lockwire 0.051Ø
BOM items 6, 24, 25

* Suggested Retention Change Page 22 3QA000118

 IDS Secondary Retention Picturebook Worksheet

Picture Correct Picture? Action Required (Drawing # / Corrected

Description
No Yes No Redesign / Instructions)

(4) 50010-10-C5D Drilled HD

Screw
Torque arrestor end plates bolts,
(4) 50010-12-C5D Drilled HD
lockwashers, and lockwired
67 X Screw
Dwg 90471 Sheet 1, Zone C/2, D/2
(8) 50910-C Washer, lock
BOM items 17, 18, 19, 21 25
A/R Z6001 Lockwasher .051Ø
(1) 53002-06-C Plug
(Drill and safety wire plug in place)

Torque arrestor and PH-85 Hanger pins,

castle nuts, and split pins (3) 78358 Pin (Ref. only)
68 Dwg 95496 (PH-85 Pipe Handler Kit) X (3) 50516-C Nut
Zones D/5, E/6-7 (3) 51403-16-S Pin, cotter
BOM items 7, 8, 9

Ensure Solid body elevator links are

upgraded to new style as per Tech
Bulletin TDS 95-03
(2) 72433 Bolt
69 Links have lower pin welded in place X (2) 50520-C Nut
and upper screws fitted with castle nuts (2) 51405-24-S Pin, cotter
and cotter pins
Dwg 105890 Zone C/4, C/3
BOM items 4, 5, 6

* Suggested Retention Change Page 23 3QA000118

 IDS Secondary Retention Picturebook Worksheet

Picture Correct Picture? Action Required (Drawing # / Corrected

Description
No Yes No Redesign / Instructions)

IDS solid body elevator wear sleeve to

be fitted per dwg notes 1 & 2
70 X (1) 105892 Sleeve, wear
Dwg 105890 Sheet 1, Zone C/6
BOM item 2

Equipment for lifting the torque

Torque tube installation pivot hinge / tube with IDS carriage to be
Carriage lock assy removed and stored when IDS is
Dwg 110864 Sheet 1, Zone B/5 and in service
71 X
Sheet 2, Zone B/3 Remove items:
BOM items 35, 28, 29 and 35: Carriage Lock Assy
Dwg 108699 BOM item 4 28: Flat washers
29: Cotter pins

Check Completed out By_______________________________

Company _______________________ Date___________________

Approved By__________________________________________
Company ________________________ Date___________________

* Suggested Retention Change Page 24 3QA000118