AOH 3060
Withdrawal sleeve, for oil injection, ISO standards
Withdrawal sleeves are slit tapered sleeves that are used to mount bearings with
a tapered bore onto the cylindrical seat of stepped shafts. This AOH(X) sleeve has
dimensions in accordance with ISO standards and are designed for oil injection
mounting and dismounting. The sleeve is located on the shaft by a lock nut or an
end plate. The lock nuts and appropriate locking device can be ordered
separately. End plates are not manufactured by SKF.
• Cost effective
• Good mounting and dismounting control
• Less manual effort
• Greater operator safety
Overview
Dimensions
Bore diameter 280 mm
Width 145 mm
Thread designation Tr 320x5
Properties
Taper 1:12
Holes for oil injection With
Generated from www.skf.com on 2023-09-13 Page 1 of 3
Technical Specification
Dimensions
d1 280 Bore diameter
mm
d 300 Outside diameter small taper
mm
B1 145 Width
mm
B2 153 Width sleeve and bearing before sleeve is driven
mm into bore
G Tr Thread
320x5
G1 26 Length thread
mm
G2 G 1/4 Thread oil supply duct
G3 15 Length of connecting thread for oil supply
mm
A 9 mm Distance bore - oil supply duct
1:12 External taper
Mass
Mass withdrawal sleeve 13 kg
Associated products
Hydraulic nut HMV 64E
Nut for removal HM 3064
Generated from www.skf.com on 2023-09-13 Page 2 of 3
Terms and conditions
By accessing and using this website / app owned and published by AB SKF (publ.) (556007-3495 ·
Gothenburg) (“SKF”), you agree to the following terms and conditions:
Warranty Disclaimer and Limitation of Liability
Although every care has been taken to assure the accuracy of the information on this website / app, SKF provides this
information "AS IS" and DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. You acknowledge that your
use of this website / app is at your sole risk, that you assume full responsibility for all costs associated with use of this
website / app, and that SKF shall not be liable for any direct, incidental, consequential, or indirect damages of any kind
arising out of your access to, or use of the information or software made available on this website / app. Any warranties
and representations in this website / app for SKF products or services that you purchase or use will be subject to the
agreed upon terms and conditions in the contract for such product or service. Further, for non-SKF websites / apps that
are referenced in our website / app or where a hyperlink appears, SKF makes no warranties concerning the accuracy or
reliability of the information in these websites / apps and assumes no responsibility for material created or published by
third parties contained therein. In addition, SKF does not warrant that this website / app or these other linked websites /
apps are free from viruses or other harmful elements.
Third Party Services
When viewing YouTube content via the SKF website(s) (i.e. using YouTube API Services), you agree to be bound by the
YouTube Terms of Service.
Copyright
Copyright in this website / app copyright of the information and software made available on this website / app rest with
SKF or its licensors. All rights are reserved. All licensed material will reference the licensor that has granted SKF the right
to use the material. The information and software made available on this website / app may not be reproduced,
duplicated, copied, transferred, distributed, stored, modified, downloaded or otherwise exploited for any commercial use
without the prior written approval of SKF. However, it may be reproduced, stored and downloaded for use by individuals
without prior written approval of SKF. Under no circumstances may this information or software be supplied to third
parties.
This website /app includes certain images used under license from Shutterstock, Inc.
Trademarks and Patents
All trademarks, brand names, and corporate logos displayed on the website / app are the property of SKF or its licensors,
and may not be used in any way without prior written approval by SKF. All licensed trademarks published on this website
/ app reference the licensor that has granted SKF the right to use the trademark. Access to this website / app does not
grant to the user any license under any patents owned by or licensed to SKF.
Changes
SKF reserves the right to make changes or additions to this website / app at any time.
Generated from www.skf.com on 2023-09-13 Page 3 of 3
