TERRAPASTE
TILE ADHESIVE IN PASTE FORM
65110
OVERVIEW
Terrapaste is a superior quality, all-purpose acrylic adhesive for ceramic tiles and clinkers. It is ideally suited
for use on most interior wall surfaces such as concrete, plasterboard, etc. Terrapaste is ready-mixed and easy
to apply by notched trowel.
PROPERTIES CLEANING OF TILES
Terrapaste is formulated from a mixture of Remove excess adhesive from the face of the tile
precisely graded, crushed dolomite, with an with a wet sponge before the adhesive dries.
acrylic binder and special additives to improve
plasticity and adhesion.
GROUTING
AREAS OF USE Terrapaste can also be used for grouting tile joints.
Terrapaste can be used on interior walls of
fairfaced concrete, lightweight concrete, EXPANSION JOINTS
plasterboard, chipboard, plywood, gypsum wall, Expansion joints, when necessary, should be
sand and cement plasters. Terrapaste is not incorporated at the design stage.
suitable for prolonged saturation areas such as
floors, swimming pools etc. HEALTH & SAFETY
Avoid prolonged contact with eyes and skin. For
PREPARATION OF SURFACE
detailed information refer to relevant material
New surfaces: Ensure that all dust, dirt and foreign safety data sheet.
matter are scraped and brushed away. Also
ensure the surfaces are free from salts, oil, grease
and ridges. Protect all adjacent surfaces not to PACKAGING & STORAGE
be covered. All cracks, chips, voids and Terrapaste is supplied in 5 and 25 kg plastic pails.
damages should be repaired with Terraco Store containers in a clean dry area protected
Handycoat Exterior. from direct sunlight and extreme heat and cold.
Unopened containers can be stored for 12 months.
Old surfaces: Before applying to old surfaces, Use oldest material first.
ensure the substrate is firm. First wash down the
surface with a sugar soap solution, rinse and allow
to dry before repairing or applying the primer.
APPLICATION & CLEANING OF TOOLS
Apply Terrapaste in a layer approximately 3mm
thick to the surface with the smooth side of a
notched trowel. Pull the trowel through the
applied layer using the notched side. Push and
twist the tiles into place so that full adherence is
obtained. Fix tiles before the adhesive layer is
surface dry. Plan work accordingly. Do not allow
a “skin” to form on the surface of applied
adhesive.
Clean tools and equipment with water after use.
TERRACO offers a comprehensive range of products and services for most concrete and finishing needs.
Please contact the TERRACO Technical Service Department or your local TERRACO agent for further
information, samples, demonstrations and instructor services. The information given in this leaflet is based
upon laboratory research, as well as extensive field work and application. All products are sold subject to
standard conditions of sale which are available on request. This information is based on TERRACO’s present
state of knowledge and is intended to provide general information on TERRACO’s products and their
methods of use. The prospective user is recommended to determine the suitability of TERRACO’s suggestions
and products before adopting them on a commercial scale.
For further details visit: www.terraco.com V. 07.2010 - Issued by Terraco Technical Centre, Ireland
TERRAPASTE
TILE ADHESIVE IN PASTE FORM
65110
TECHNICAL DATA
Product Ready-mixed tile adhesive in paste form.
Filler Precisely graded crushed dolomite.
Binder Styrene acrylate.
Additives Contains additives to improve plasticity and adhesion.
Colour White
Toxicity Non-toxic
Material Consumption 1.0-2.0 Kg/m2 depending on tile and base.
Fire Resistance BS476, Part 6 To Class 0 rating.
Temperature Resistance Not affected by frost.
Pull-off-strength (concrete In all official tests, rupture occurred in the bodies of the ceramic tiles.
walls) Average pull-off strength before rupture was 1.88 N/mm2 .
Packaging 5kg and 25kg plastic pails.
Storage 12 months in original unopened containers.
For technical enquiries please contact your nearest Terraco representative:
RUSSIA: JORDAN: THAILAND:
OOO Terraco Sweden Ltd, Russia Jordan Swedish Polymers Industrial Corp. Terraco Industry (Thailand) Limited
Tel: +7 (0)495 9212 237 Tel: +962 (0)6 553 8751 Tel: +66 (0)2 946 68 56 / 58
Fax: +7 (0)495 6273 881 Fax: +962 (0)6 553 6560 Fax: +66 (0)2 946 68 59
E-mail: adm@terraco.ru E-mail: terraco@nol.com.jo E-mail: terraco@terraco.co.th
Web: www.terraco.ru Web: www.terraco.jo Web: www.terraco.com
OOO Terraco Vostok Ltd EGYPT: VIETNAM:
Tel: +7 (0)4212 410563 Terraco Egypt Chemical Industries S.A.E. Terraco Vietnam Co., Ltd
Fax: +7 (0)4212 410591 Tel: +20 (0)22 29184 53 / 57 / 58 Tel: +84 (0)650 3 820 100
E-mail: terracovostok@terraco.khn.ru Fax: +20 (0)22 29184 80 Fax: +84 (0)650 3 820101
Web: www.terraco.com E-mail: terraco@terraco.com.eg E-mail: terraco@terraco.com.vn
Web: www.terraco.com.eg Web: www.terraco.com
CHINA:
Terraco Architectural Coatings China Co., Ltd. UAE: SOUTH KOREA:
Tel: +86 (0)20 8759 4742 Terraco UAE Ltd Terraco Korea Co., Ltd
Fax: +86 (0)20 8526 8056 Tel: +971 (0)4 326 2699 Tel: +82 (0) 2 5611 551
E-mail: sales@terraco.com.cn Fax: +971 (0)4 326 2733 Fax: +82 (0)2 5671 771
Web: www.terraco.com.cn E-mail: terraco@terraco.ae E-Mail: terraco@terraco.co.kr
Web: www.terraco.com Web: www.terraco.co.kr
Terraco Chemical (Shanghai) Co., Ltd.
Tel: +86 (0)21 621020 48 / 18 TURKEY: IRELAND:
Fax: +86 (0)21 625205 47 Terraco Yapi Malzemeleri Sanayi Ve Ticaret AS Terraco Technical Centre, Ireland
Email: sales@terraco.com.cn Tel: +90 (0)222 236 0423 Tel: +353 (0) 404 66555
Web: www.terraco.com.cn Fax: +90 (0)222 236 0425 Fax: +353 (0) 404 66654
E-mail: terraco@terraco.com.tr E-mail: technical-centre@terraco.com
PAKISTAN: Web: www.terraco.com.tr Web: www.terraco.com
Terraco Pakistan Pvt. Ltd.
Tel: +92 (0)42 3529 70 56-8
Fax: +92 (0)42 3529 70 55
Email: terraco@terraco.pk
Web: www.terraco.com
For further details visit: www.terraco.com V. 07.2010 - Issued by Terraco Technical Centre, Ireland
