0% found this document useful (0 votes)

236 views178 pages

Hydraulic Distributors Catalogue 2019: 27 Altair Place, Penrith T: 02 4721 5544

Uploaded by

Ilham Waskito

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

236 views178 pages

Hydraulic Distributors Catalogue 2019: 27 Altair Place, Penrith T: 02 4721 5544

Uploaded by

Ilham Waskito

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 178

Hydraulic Distributors

Catalogue 2019

• Pumps • Motors • Industrial Valves

• Manifolds & Sub plates • Mobile Valves
• Cartridge Valves & Bodies • Inline & Cartridge Valves
• Hydraulic Tanks & Accessories
• Bell Housing & Coupling • Pressure Switches
• Power Pack • Cylinders • Hose & fittings
• Oil • Filters • Gauges
• Hoist • PTO’s

www.hydraulicdistributors.com.au
27 Altair Place, Penrith
T: 02 4721 5544
An Australian
Owned Company
Important Notice
Warning
Hydraulic failures, incorrect or improper use of components and system design by person without sufficient
expertise may cause serious injury, property damage and even Deaths.

Disclaimer

By using this Price List you acknowledge that you have read, understand and you agree to be bound by the
following terms and conditions.

This Price List Catalogue is provided by Hydraulic Distributors Pty Ltd to give general product information
only. It is the responsibility of the user to have the technical expertise, to evaluate, assess and make final
decision. Due to the complexity and diversity of possible hydraulic systems, circuits and working
conditions, Hydraulic Distributors and its employees can only offer general product information. It is the
sole responsibility for the user to ensure that all product specifications, safety warnings, government
regulations and correct procedures are considered and met.

Hydraulic Distributors Pty Ltd has endeavoured to produce accurate information in this Price List and shall
not be responsible for any incorrect information that results from unintentional oversight.

Due to the continuous improvement of products, the product specifications in this Price List are subject to
change by Hydraulic Distributors Pty Ltd at any times, without notice.

All Prices in this Price List exclude Goods and Services Tax (GST)

All Prices in this Price List are subject to change without notice.
VISION
To be Australia’s leading supplier of high-end hydraulic
solutions and quality components, providing industry-
leading customer service and technical know-how.
Warren Mottram, Managing Director says
“We have very close working relationships with our customers
and pride ourselves on “old-fashioned” quality workmanship
whilst looking forward to new technologies and the latest
product developments.”
HD has 20 years’ experience in the Hydraulic industry. An
Australian owned company, located at Penrith NSW, Hydraulic
Distributors has 12 full time, dedicated team members who are
passionate about working in the hydraulics industry.

EXPERIENCE THAT COUNTS

The majority of our work comes from repeat customers. Operating
since 1985, Hydraulic Distributors has an impressive reputation for
both quality and workmanship. Over the past 20 years we’ve worked
with hundreds of companies and industries including:
The Department of Defence (design and repair work on military equipment)
News Limited (supplied equipment for ink pump system
in Western Australia Operation)
Ezi Automation (supplied equipment to be used to power opening and
closing of gates for Security Crash Protection at Embassies in Australia
RANGE OF SERVICES
SALES
• Over 2,500 total line items in stock
• Over 20,000 total items in stock
• Experienced Internal and External Sales Team provide technical know-how with before and after sales service and support
• If you need it, we’ve got it (if we don’t have it, we can get it!) We stock major brands like: Altatec PTO's and Truck Hydraulic
Equipment
BHA Hydraulic Components
Char-Lynn Low Speed High Torque Motors Eaton Pumps Motors and
Transmissions
Hawe High Pressure Hydraulic Pumps and Valves Hydac Hydraulic Accessories and
Monitoring Equipment Monarch DC Power Units
Oilpath Australian Made Hydraulic Valves and Manifolds
Ryco Hose, Adaptors and Fittings
Stauff Hydraulic Accessories
Sterling Hydraulics Hydraulic Cartridge Valves
Sun Hydraulics Hydraulic Cartridge Valves and Manifolds
Valvoline Oils and Lubricants
Vickers Industrial Components
Products we offer: Hose & Fittings, Mono Block Valves, Standard and custom built manifolds, Cartridge valves and bodies, Gear Pumps,
Piston Pumps, Piston Motors, Gerola Motors, AC and DC Power Units, Custom and Standard Hydraulic Cylinders,
Hydraulic Accessories, Truck PTO’s and Pumps, Truck Hoists, Truck Accessories, Oils and Lubricants.

SERVICE
» Our custom-designed Mobile Service Vans provide on-site service facility
» Experienced and Qualified Service Technicians
» Full workshop facilities:
• Undercover
• 3.5 Tonne overhead crane
• Machine Shop facilities
• High clearance truck access
• EPA and water board approved wash facilities
• Certified Hydraulic Testing Equipment

DESIGN AND ENGINEERING

» Computer generated drawing and design facility
» Extensive design and technical experience
» Capacity to design everything from the smallest application to large million dollar turn key projects
» We understand and make allowances for mechanical design issues outside mainstream hydraulics
INDEX
SECTION
Pumps 1
Motors 2
Industrial Valves 3
Manifolds & Sub plates 4
Mobile Valves 5
Cartridge Valves & Bodies 6
Inline & Cartridge Valves 7
Hydraulic Tanks & Accessories 8
Bell Housings & Couplings 9
Pressure Switches 10
Power Units AC & DC 11

February 14
PUMP SECTION
Page

HA10VSO Piston Pumps 1.01

HA10VSO Spare Parts 1.04
V10 and V20 Vane Pumps 1.05
V10P and V20P Vane Pumps with Priority Head 1.05
VQ Single Vane Pumps 1.09
VQ Double Vane Pumps 1.012
PZ1 Group 1 Gear Pumps 1.015
PZ1 Group 1 Multiple Gear Pumps 1.016
PZ2AG Specifications 1.017
PZ2AG Group 2, Single Gear Pumps 1.019
PZ2CG SAE A, Single Gear Pumps 1.021
PZ2BG German Style Gear Pumps 1.022
PZ2DG Deutz Style Gear Pumps 1.023
PZ2AG Multiple Gear Pumps 1.024
PZ3 Group 3 & SAE B Gear Pumps 1.026
PW3 Cast Iron Group 3 Gear Pumps 1.028
PW3 Cast Iron SAE B Gear Pumps 1.029
NFA Chelsea Type Mount Cast Gear Pumps 1.029
PZ3AG Multiple Gear Pumps 1.030
PW3 Mulple Group 3 Gear Pumps 1.032
Assembly and Seal Kits 1.033
Hand Pumps 1.034
PISTONPUMPS

HA10VSO
Variable Displacement Pumps

Splined or Straight Keyed Shaft

280 Bar
Mechanical Displacement Limiter

P/Comp & Load Sense Control

The HA10VSO Open Loop Variable displacement Piston pump has numerous controller, shafts and mount-
ing options. The single pump comes standard with a Maximum Displacement adjustment and SAE flanged
ports. There is a through drive version that offers an SAE mounting for a Rear Pump.

SAE Splined Shafts

Flange
Part Number Description Mounting Shafts
Ports
HA10VSO18DFR/31RPSC12NOO 18cc Piston Pump L/Sense SAE A 2 Bolt 3/4” & 1” 3/4” 11T
HA10VSO28DFR/31RPSC12NOO 28cc Piston Pump L/Sense SAE B 2 Bolt 3/4” &11/4” 7/8” 13T
HA10VSO45DFR/31RPSC12NOO 45cc Piston Pump L/Sense SAE B 2 Bolt 1” & 11/2” 1” 15T
HA10VSO71DFR/31RPSC12NOO 71cc Piston Pump L/Sense SAE C 2 Bolt 1” & 2” 1 ¼” 14T
HA10VSO100DFR/31RPSC12NOO 100cc Piston Pump L/Sense SAE C 2 Bolt 11/4” &21/2” 1 ½” 17T
HA10VSO140DFR/31RPSC12NOO 140cc Piston Pump L/Sense SAE D 4 Bolt 11/4” &21/2” 1 3/4” 13T

Straight Keyed

Flange
Part Number Description Mounting Shafts
Ports
HA10VSO18DFR/31RPPC12NOO 18cc Piston Pump L/Sense SAE A 2 Bolt 3/4” & 1” 18mm Str Key
HA10VSO28DFR/31RPPC12NOO 28cc Piston Pump L/Sense SAE B 2 Bolt 3/4” &11/4” 22mm Str Key
HA10VSO45DFR/31RPPC12NOO 45cc Piston Pump L/Sense SAE B 2 Bolt 1” & 11/2” 25mm Str Key
HA10VSO71DFR/31RPPC12NOO 71cc Piston Pump L/Sense SAE C 2 Bolt 1” & 2” 32mm Str Key
HA10VSO100DFR/31RPPC12NOO 100cc Piston Pump L/Sense SAE C 2 Bolt 11/4” &21/2” 45mm Str Key

Pumps 1.1
PISTONPUMPS

HA10VSO
Variable Displacement Pumps
280 Bar

Pressure Compensated, Load Sense

and Remote Pressure

Through Drive

Through Drive
Part Number Description
Splined Shaft
HA10VSO28DFR/31RPSC12K01 28cc Piston Pump SAE A 2 Bolt 5/8” 9T
HA10VSO28DFR/31RPSC12K52 28cc Piston Pump SAE A 2 Bolt 3/4” 11T
HA10VSO28DFR/31RPSC12K02 28cc Piston Pump SAE B 2 Bolt 7/8” 13T
HA10VSO45DFR/31RPSC12K01 45cc Piston Pump SAE A 2 Bolt 5/8” 9T
HA10VSO45DFR/31RPSC12K52 45cc Piston Pump SAE A 2 Bolt 3/4” 11T
HA10VSO45DFR/31RPSC12K04 45cc Piston Pump SAE B 2 Bolt 1” 15T
HA10VSO71DFR/31RPSC12K01 71cc Piston Pump SAE A 2 Bolt 5/8” 9T
HA10VSO71DFR/31RPSC12K52 71cc Piston Pump SAE A 2 Bolt 3/4” 11T
HA10VSO71DFR/31RPSC12K04 71cc Piston Pump SAE B 2 Bolt 7/8” 13T
HA10VSO71DFR/31RPSC12K07 71cc Piston Pump SAE C 2 Bolt 1 ¼” 14T
HA10VSO100DFR/31RPSC12K07 100cc Piston Pump SAE C 2 Bolt 1 ½” 17T
HA10VSO140DFR/31RPSC12K07 140cc Piston Pump SAE D 4 Bolt 1 3/4” 13T

Horse Power Control

Part Number Description SET @ Kw Splined Shaft

HA10VSO28DFLR/31RPSC12NOO 28cc Piston Pump H/Power Control 5.5Kw 7/8” 13T
HA10VSO45DFLR/31RPSC12NOO 45cc Piston Pump H/Power Control 7.5Kw 1” 15T
HA10VSO71DFLR/31RPSC12NOO 71cc Piston Pump H/Power Control 11Kw 1 ¼” 14T
HA10VSO100DFLR/31RPSC12NOO 100cc Piston Pump H/Power Control * 1 ½” 17T

Pumps 1.2
PISTONPUMPS
HA10VSO
Variable Displacement Pump
Splined or Keyed Shaft
280 Bar
Mechanical Displacement Limiter

HA10VS O 71 DR /31 R -P P A 12 NOO

Axial piston Type of Size Control device Series Rotation Seals Shaft end Mounting Service line Through
unit operation Flange connections drives
18
DR:
Pressure control A:
HA10VS 28 ISO 2-hole
Variable P:
DRG: (View on
swashplate Pressure control, NBR nitrl~ caou-
design, for shaft end) tchouc to Din
45 remotely con- 12:
industrial ISO1629 Pressure port B,
applications O: trolled
(Shaft seal in Suction Port S
Pump in R: FKM) See (SAE ports at
Nominal Open cir- DFR: 31 B:
Clockwise below opposite sides
pressure cuits Pressure/Flow ISO 4-hole Metric fixing
28Mpa, 71 control L: V: thread
Anticlock- FKM fluor~
Peak Pressure DFR1: wise
Pressure/flow caoutchouc to Din
35 MPA
100 control, without ISO1629
orifice in X-Line C:
SAE 2 Hole
140

*Theoretical Values Only

Pumps 1.3
PISTONPUMPS

HA10VSO Spare Parts

Seal Kits
Part Number Size 18 28 45 71 100 140
HA10VSO(size)-SK

Shafts
Part Number Description Size 18 28 45 71 100 140
HA10VSO(size)-Shaft-U SAE Splined 5/8” 9T

HA10VSO(size)-Shaft-S SAE Splined 3/4” 11T 7/8” 13T 1” 15T 1 1/4” 14T 1 1/2” 17T 1 3/4” 13T

HA10VSO(size)-Shaft-P Metric Straight Keyed 18mm 22mm 25mm 32mm 40mm 45mm

Rotating Groups
Part Number Description Size 18 28 45 71 100 140
HA10VSO(size)-RG

Valve Plates
Part Number Description Size 18 28 45 71 100 140
HA10VSO(size)-VP-RH
HA10VSO(size)-VP-LH

Bearings
Part Number Description Size 18 28 45 71 100 140
HA10VSO(size)-Brg Front Front Shaft Bearing
HA10VSO(size)-Brg Rear Rear Shaft Bearing
HA10VSO(size)-Brg -SP Swash Plate Saddle Brgs

Pumps 1.4
VANEPUMPS

V10 and V20 Series

Vane Pumps

Ring Size
Displacement Max speed Max Pressure
Model Delivery US Gpm
cc/rev rpm Bar
@ 1200 Rpm
1 3.3 4800 172
2 6.6 4500 172
3 9.8 4000 172
V10 4 13.1 3400 172
5 16.4 3200 172
6 19.5 3000 152
7 22.8 2800 138
6 19.5 3400 172
7 22.8 3000 172
8 26.5 2800 172
V20 9 29.7 2800 172
11 36.4 2500 172
12 39.0 2400 152
13 42.4 2400 152
V10P Including Prioity Flow and Relief Head

V20P Including Prioity Flow and Relief Head

Spare Parts
Cartridges Shafts and Seal Kits
Ring Size
Delivery US cc/
Part Number Part Number Description
Gpm rev
@ 1200 Rpm
PC-V10-1-R-20 1 3.3 PS-V10-1-20 Shaft 3/4” Straight Keyed
PC-V10-2-R-20 2 6.6 PS-V10-11-20 Shaft SAE A 5/8” 9T Splined
PC-V10-3-R-20 3 9.8 PS-V10-38-20 Shaft 3/4” 11T Splined
PC-V10-4-R-20 4 13.1
PC-V10-5-R-20 5 16.4 PS-V20-1-20 Shaft 3/4” Straight Keyed
PC-V10-6-R-20 6 19.5 PS-V20-11-20 Shaft 3/4” 11T Splined
PC-V10-7-R-20 7 22.8 PS-V20-62-20 Shaft SAE A 5/8” 9T Splined
PC-V20-6-R-20 6 19.5
PC-V20-7-R-20 7 22.8 PSK-V10-20 V10 Seal Kit
PC-V20-8-R-20 8 26.5
PC-V20-9-R-20 9 29.7 PSK-V20-10 V20 Seal Kit
PC-V20-11-R-20 11 36.4
PC-V20-12-R-20 12 39.0
PC-V20-13-R-20 13 42.4

Pumps 1.5
OrderingCodes
V10 and V20 Ordering Code
(F3-) V10 -P 7 S -1 C 20 -L

Prefix Series Inlet Port Code Outlet Port Shafts Outlet Positions Design Rotation
Connections Connections
P-1/2” NPT Viewed from
P-1” NPT thread thread Cover end of
1,2,3, pump Viewed from
S-1.3125-12 S-0.750-16 shaft end of Pump
Omit- 4, 1-3/4” Str.
Using V10 straight thread straight thread A-Opposite inlet 20
(1 5/16” UNO) (3/4” UNO) Keyed port
antiwear 5,6,7
oil B-G1” thread 11- 9T
Water B-90˚CCW from L-Left Hand for
B-G1/2” thread Spline inlet
glycol counter clockwise
fluid
38- 11
P-1-1/4”NPT tooth C-Inline with
F3- P-3/4” NPT
thread 6,7,8, -3/4” OD inlet R-Right Hand
Phosphate thread
ester fluid 9 for clockwise
S-1.625-12 S-1.0625-12 62- Spline D-90˚ CW from
straight thread 10,11, inlet 10
V20 straight thread (V20 only)
(1 5/8” UNO) 12, (1 1/6” UNO)
13,14
B-G1-1/4” thread B-G3/4” thread

V10F & P and V20F & P Ordering Code

(F3-) V20 F -P 13 S -1 A 8H 22 -L

Integral Inlet Port Outlet Port De-

Prefix Series Code Shafts Outlet Positions Integral Valves sign
Rotation
Valves Connections Connections

Viewed from Cover Orifice Relief Viewed from

1 end of pump No. Valve shaft end of
1-3/4” Str. Flow Setting Pump
D: 1 5/16-12 str. 2 Keyed
Thd (V20 Only) Rate MPa
3 LPM
4 3: Threaded
V10 with Woodruff A-Opposite inlet
F: Flow P: 1” NPT thrd 5 Key port L-Left Hand
Omit-Using Con- trol & (V10 Only) A –1.7 for counter
antiwear oil 6 2-8 clockwise
Relief 1 1/4” NPT thrd 11:Splined B-90˚CCW from B - 3.5
Water 7 inlet 3-11 C - 5.2
(V20 only)
glycol fluid 12: Splined D-7
See Chart 4-15
V10 only C-Inline with inlet E - 8.6 22 R-Right
F3- Below 5-19
P: S:1 5/16-12 str. F - 10 Hand for
Phosphate 6 D-90˚ CW from
ester fluid Priority thd. (V10 only) 38: Splined 6-23 G - 12.1 clockwise
valve & 1 5/8” -12 str thd. 7 inlet
7-27 H - 14
Relief (V20 only) 62– SAE A
8 8-30 J - 15.5
Spline K - 17.5
9 (V20 only)
V20 T: 1 3/16-12 str 10
thd. (V10 only)
11 See Charts
12
13

Porting
Flow Control Cover Priority Valve Cover
Code
Pressure Tank Primary Outlet Secondary Outlet Tank
K - - 9/16-18 (V10P) 3/4-16 (V10P) 9/16-18 (V10P)
P 9/16-18 1/2” NPT - - -
(V10F & V20F) (V10F & V20F)
S 3/4-16 (V10F) 1-1/16-12 (V20F)
T 3/4-16 (V10F) 3/4-16 (V10F) 3/4-16 (V20P) 7/8-14 (V20P) 3/4-16 (V20P)

Pumps 1.6
VANEPUMPS

Pumps 1.7
Pumps 1.8
VQSINGLEVANEPUMPS

Model Cartridge Code CC per Rev Max RPM Max Press BAR
2 7 2700 210
3 11.7 2700 210
4 15 2700 210
5 18 2700 210
6 19 2700 210
7 22 2700 210
20VQ
8 27 2700 210
9 30 2700 210
10 31.5 2700 210
11 36 2700 210
12 40 2700 160
14 45 2700 140
10 32.5 2700 210
12 38.3 2700 210
14 43.3 2700 210
25VQ 15 47.3 2500 210
17 52.5 2500 210
19 60 2500 210
21 65 2500 210
21 64 2500 210
25 79.2 2500 210
30 95 2500 210
35VQ 32 101 2500 210
35 109 2400 210
38 118 2400 210
45 140 2400 210
42 134 2400 175
45 147 2200 175
50 156 2200 175
57 180 2200 175
45VQ
60 189 2200 175
66 208 2200 175
75 237 2200 140

* Refer Next Page for Ordering Code

Spare Parts
Cartridges & Seal Kits Shafts

Part Number Description Part Number Description

F3-PC-20VQ-**-R-10 Cartridge 20VQ PS-20VQ-1-30 Shaft 7/8” Straight Keyed

F3-PC-25VQ-**-R-10 Cartridge 25VQ PS-20VQ-151-30 Shaft SAE B 7/8” 13T Splined
F3-PC-35VQ-**-R-10 Cartridge 35VQ PS-25VQ-1-20 Shaft 7/8” Straight Keyed
F3-PC-45VQ-**-R-10 Cartridge 45VQ PS-25VQ-11-20 Shaft SAE B 7/8” 13T Splined
PS-25VQ-86-20 Shaft 1” Straight Keyed
PS-35VQ-1-20 Shaft 11/4” Straight Keyed
PSK-20VQ-10 20VQ Seal Kit PS-35VQ-11-20 Shaft SAE C 11/4” 14T Splined
PSK-25VQ-10 25VQ Seal Kit PS-35VQ-86-20 13/8” Straight Keyed
PSK-35VQ-10 35VQ Seal Kit PS-45VQ-1-20 Shaft 11/4” Straight Keyed
PSK-45VQ-10 45VQ Seal Kit PS-45VQ-11-20 Shaft SAE C 11/4” 14T Splined
PS-45VQ-86-20 Shaft 11/2” Straight Keyed

Pumps 1.9
Ordering Code
(F3-) 20VQ 11 A (F) -1 A 30 *

Prefix Series Cartridge Code Port Mounting Shaft Outlet Position Design Rotation
Connections
2, 3, 4, 5, 6, 7, 8, 1-Str Key Viewed from cover
20VQ end of pump 30
9, 10, 11, 12, 14 151-Spline Viewed from
Omit– Using shaft end of
antiwear oil 10, 12, 14, 15, pump
water Glycol 25VQ Omit– Flange
Fluid 17, 19, 21 A-SAE
Mtg A-Opposite inlet port
4 Bolt Flange
1– Str Key
21, 25, 30, 32,
F3- 35VQ F– Foot Mtg 86-HD Str Key B-90° CCW from Inlet 20 Omit-RH
Phosphate 35, 38, 45
Ester Fluid 11-Spline C-Inline with Inlet
L-LH
42, 45, 50, 57,
45VQ D-90° CW from Inlet
60, 66, 75

20VQ Flange Mounting

25VQ Flange Mounting

Pumps 1.10
Pumps 1.11
VANEPUMPS

Double VQ Vane Pumps

Model Frt Section Ports Rear Section Frt Flange Shaft

(cc/rev) SAE Flanged (cc/rev) Mount
32.5, 38.3, 43.3, 47.3, 2 1/2” Suction 7, 11.7, 15, 18, 19, 22, 27, SAE B
2520VQ 1” Pressure Front 7/8” Keyed
52.5, 60, 65 30, 31.5, 36, 40, 45 2 Bolt
3/4” Pressure Rear

64, 79.2, 95, 101, 3” Suction 7, 11.7, 15, 18, 19, 22, 27,
3520VQ 109, 118 1 1/4” Pressure Front 30, 31.5, 36, 40, 45
3/4” Pressure Rear

64, 79.2, 95, 101, 3” Suction 32.5, 38.3, 43.3, 47.3,

3525VQ 109, 118 1 1/4” Pressure Front 52.5, 60, 65
1” Pressure Rear 1 1/4” Keyed
3 1/2” Suction Or
134, 147, 156, 180, 7, 11.7, 15, 18, 19, 22, 27, SAE C
4520VQ 1 1/2” Pressure Front 1 1/2” Keyed
189, 208, 237 30, 31.5, 36, 40, 45 2 Bolt
3/4” Pressure Rear or
3 1/2” Suction
SAE C 14T Splined
134, 147, 156, 180, 32.5, 38.3, 43.3, 47.3,
4525VQ 189, 208, 237 1 1/2” Pressure Front 52.5, 60, 65
1” Pressure Rear

134, 147, 156, 180, 4” Suction 64, 79.2, 95, 101, 109,
4535VQ 189, 208, 237 1 1/2” Pressure Front 118
1 1/4” Pressure Rear
Specifications refer next page of Catalogue

Spare Parts
Cartridges & Seal Kits Shafts

Part Number Description Part Number Description

F3-PC20VQ-**-R-10 Frt Cartridge 20VQ PS-2520VQ-1-20 Shaft 7/8” Straight Keyed

F3-PC25VQ-**-R-10 Frt Cartridge 25VQ PS-2520VQ-11-20 Shaft SAE B 7/8” 13T Splined
F3-PC35VQ-**-R-10 Frt Cartridge 35VQ PS-2520VQ-86-20 Shaft 1” Straight Keyed
F3-PC45VQ-**-R-10 Frt Cartridge 45VQ PS-352*VQ-1-20 Shaft 11/4” Straight Keyed
PS-352*VQ-11-20 Shaft SAE C 11/4” 14T Splined
F3-PCT20VQ-**R-10 Rear Cartridge 20VQ PS-352*VQ-86-20 13/8” Straight Keyed
F3-PCT25VQ-**R-10 Rear Cartridge 25VQ PS-45**VQ-1-20 Shaft 11/4” Straight Keyed
PS-45**VQ-11-20 Shaft SAE C 11/4” 14T Splined
PSK-2520VQ-10 2520VQ Seal Kit PS-45**VQ-86-20 Shaft 11/2” Straight Keyed
PSK-3520VQ-10 3520VQ Seal Kit
PSK-3525VQ-10 3525VQ Seal Kit
PSK-4520VQ-10 4520VQ Seal Kit
PSK-4525VQ-10 4525VQ Seal Kit
PSK-4535VQ-10 4535VQ Seal Kit

Pumps 1.12
VANEPUMPS

Specifications

Ordering Code
(F3-) ****VQ ** ** (F) -* ** 20 *
A
Cartridge Code Cartridge Code

Prefix Series Front Pump Port Rear Pump Mounting Shaft Port Design Rotation
(Shaft End) Connections (Cover End) Orientation
2520VQ 10, 12, 14, 15, 2, 3, 4, 5, 6, 7, 8, 9,
17, 19, 21 10, 11, 12, 14
Omit– Using 3525VQ 21, 25, 30, 32, 10, 12, 14, 15, 17,
antiwear oil 35, 38, 45 19, 21 Viewed from
1-Str Key
water Glycol CC Std shaft end of
4525VQ 42, 45, 50, 57, A-SAE 10, 12, 14, 15, 17, Omit– Flange pump
Fluid 60, 66, 75 19, 21 Mtg 86-HD Str
Key 20
4 Bolt Flange 2, 3, 4, 5, 6, 7, 8, 9, See Omit-RH
F3- 3520VQ 21, 25, 30, 32, F– Foot Mtg
Phosphate 35, 38, 45 10, 11, 12, 14 11-Spline Catalogue L-LH
Ester Fluid
4520VQ 42, 45, 50, 57, 2, 3, 4, 5, 6, 7, 8, 9,
60, 66, 75 10, 11, 12, 14
4535VQ 42, 45, 50, 57, 21, 25, 30, 32, 35,
60, 66, 75 38, 45

2520VQ 3520VQ 3525VQ

4520VQ 4525VQ 4535VQ

Pumps 1.13
VANEPUMPS

Model Cartridge Code CC per Rev Max RPM Max Press BAR
2 7 2700 210
3 11.7 2700 210
4 15 2700 210
5 18 2700 210
Specifications 20VQ
6
7
19
22
2700
2700
210
210
8 27 2700 210
9 30 2700 210
10 31.5 2700 210
11 36 2700 210
12 40 2700 160
14 45 2700 140
10 32.5 2700 210
12 38.3 2700 210
14 43.3 2700 210
25VQ 15 47.3 2500 210
17 52.5 2500 210
19 60 2500 210
21 65 2500 210
21 64 2500 210
25 79.2 2500 210
30 95 2500 210
35VQ 32 101 2500 210
35 109 2400 210
38 118 2400 210
45 140 2400 210
42 134 2400 175
45 147 2200 175
50 156 2200 175
45VQ 57 180 2200 175
60 189 2200 175
66 208 2200 175
75 237 2200 140

ShaftData

Straight Keyed Shafts

Model F Key Width X
Shaft Code A B C D E
VQ Length
20VQ 1 59 9.53 12.1 22.23/22.20 24.5/24.4 4.76 x 32
25VQ 1 59 9.53 11.1 22.23/22.20 24.5/24.4 4.76 x 32
2520VQ 86 78 9.53 11.1 25.37/25.35 28.3/28.1 6.36 x 50.8
35VQ 1 73.2 9.53 11.1 31.75/31.70 35.36/34.10 7.94 x 38.1
352*VQ 86 86 9.53 11.1 34.90/34.87 38.6/38.3 7.94 x 54
45VQ 1 62 12.7 14.22 21.75/31.70 35.36/34.10 7.94 x 28.5
45**VQ 86 87.4 12.7 14.22 38.07/38.05 42.4/42.1 9.54 x 50.8

Splined Shafts
20VQ 151 41.1 9.53 11.1 3.9 27.8 7/8” Dia 13T 16/32
25VQ 11 44.5 9.53 11.1 3.9 27.8 7/8” Dia 13T 16/32
2520VQ
35VQ 11 58.7 9.53 11.1 6.35 35.1 11/4” Dia 14T 12/24
352*VQ
45VQ 11 61.9 12.7 14.3 9.7 39.6 11/4” Dia 14T 12/24
45**VQ

Pumps 1.14
GROUP1GEARPUMPS

GROUP 1
TAPER SHAFT 1:8
3/8” BSPP THREADED PORTS

PART NUMBER PORTS

CC P/REV
RH ROT LH ROT PRESSURE SUCTION
PZ1A11C401D PZ1A11C401S 1.1CC 3/8" BSPP 3/8" BSPP
PZ1A16C401D PZ1A16C401S 1.6CC 3/8" BSPP 3/8" BSPP
PZ1A21C401D PZ1A21C401S 2.1CC 3/8" BSPP 3/8" BSPP
PZ1A26C401D PZ1A26C401S 2.6CC 3/8" BSPP 3/8" BSPP
PZ1A32C401D PZ1A32C401S 3.2CC 3/8" BSPP 3/8" BSPP
PZ1A37C401D PZ1A37C401S 3.7CC 3/8" BSPP 3/8" BSPP
PZ1A42C401D PZ1A42C401S 4.2CC 3/8" BSPP 3/8" BSPP
PZ1A48C401D PZ1A48C401S 4.8CC 3/8" BSPP 3/8" BSPP
PZ1A55C401D PZ1A55C401S 5.5CC 3/8" BSPP 3/8" BSPP
PZ1A62C401D PZ1A62C401S 6.2CC 3/8" BSPP 3/8" BSPP
PZ1A78C401D PZ1A78C401S 7.8CC 3/8" BSPP 3/8" BSPP
PZ1A88C401D PZ1A88C401S 8.8CC 3/8" BSPP 3/8" BSPP

MAIN CHARACTERISTICS
Type 1.1 1.6 2.1 2.6 3.2 3.7 4.2 4.8 5.5 6.2 7.8 8.8

Capacity cc/rev. 1,08 1,59 2,09 2,59 3,15 3,68 4,19 4,79 5,49 6,2 7,81 8,82
Max. working pressure bar bar 210 210 210 210 210 210 190 180 160 140 120 100
Peak pressure r.p.m. 250 250 250 250 250 250 230 220 200 180 160 140
Max. speed for P1 press Max. r.p.m. 6000 6000 6000 5500 4500 4000 3800 3500 3500 3000 3000 3000
speed without load Min.speed r.p.m 8000 8000 8000 8000 7000 6000 5500 5000 4500 4500 4000 4000
for P1(undirect.) . A 1100 950 800 700 600 500 450 400 400 400 400 400
Overall dimensions B 73,8 75,8 77,8 79,8 82 84,1 86,1 88,5 91,3 94,1 100,5 104,5
34,6 35,6 36,6 37,6 38,7 39,8 40,8 42 43,4 44,8 48 50

DIMENSIONS

STD PZ1A FRT Cover

Multiple Pump Dimensions 15.5

High Pressure Pumps Cast Iron End Plates available on Request

Pumps 1.15
MULTIPLEGEARPUMPS

GROUP 1
THREADED PORTS
MAX TORQUE 27NM

FRONT PUMP

PART NUMBER CC P/ L PORTS

RH ROT REV DIM PRESSURE SUCTION
PZ1A11C401AD 1.1CC 38.3 3/8" BSPP 3/8" BSPP
PZ1A16C401AD 1.6CC 40.3 3/8" BSPP 3/8" BSPP
PZ1A21C401AD 2.1CC 42.3 3/8" BSPP 3/8" BSPP
PZ1A26C401AD 2.6CC 44.3 3/8" BSPP 3/8" BSPP
PZ1A32C401AD 3.2CC 46.5 3/8" BSPP 3/8" BSPP
PZ1A37C401AD 3.7CC 48.6 3/8" BSPP 3/8" BSPP
PZ1A42C401AD 4.2CC 50.6 3/8" BSPP 3/8" BSPP
PZ1A48C401AD 4.8CC 53 3/8" BSPP 3/8" BSPP
PZ1A55C401AD 5.5CC 55.8 3/8" BSPP 3/8" BSPP
PZ1A62C401AD 6.2CC 58.6 3/8" BSPP 3/8" BSPP
PZ1A78C401AD 7.8CC 65 3/8" BSPP 3/8" BSPP
PZ1A88C401AD 8.8CC 69 3/8" BSPP 3/8" BSPP

NOTE: CONNECTION KIT INCLUDED IN MULTIPLE PUMP ASSEMBLIES

INTERMEDIATE PUMP

PART NUMBER PORTS

CC P/REV
RH ROT PRESSURE SUCTION
PZ1A110001ID 1.1CC 3/8" BSPP 3/8" BSPP
PZ1A160001ID 1.6CC 3/8" BSPP 3/8" BSPP
PZ1A210001ID 2.1CC 3/8" BSPP 3/8" BSPP
PZ1A260001ID 2.6CC 3/8" BSPP 3/8" BSPP
PZ1A320001ID 3.2CC 3/8" BSPP 3/8" BSPP
PZ1A370001ID 3.7CC 3/8" BSPP 3/8" BSPP
PZ1A420001ID 4.2CC 3/8" BSPP 3/8" BSPP
PZ1A480001ID 4.8CC 3/8" BSPP 3/8" BSPP
PZ1A550001ID 5.5CC 3/8" BSPP 3/8" BSPP
PZ1A620001ID 6.2CC 3/8" BSPP 3/8" BSPP
PZ1A780001ID 7.8CC 3/8" BSPP 3/8" BSPP
PZ1A880001ID 8.8CC 3/8" BSPP 3/8" BSPP

REAR

PART NUMBER PORTS

CC P/REV
RH ROT PRESSURE SUCTION
PZ1A0110001PD 1.1CC 3/8" BSPP 3/8" BSPP
PZ1A0160001PD 1.6CC 3/8" BSPP 3/8" BSPP
PZ1A0210001PD 2.1CC 3/8" BSPP 3/8" BSPP
PZ1A0260001PD 2.6CC 3/8" BSPP 3/8" BSPP
PZ1A0320001PD 3.2CC 3/8" BSPP 3/8" BSPP
PZ1A0370001PD 3.7CC 3/8" BSPP 3/8" BSPP
PZ1A0420001PD 4.2CC 3/8" BSPP 3/8" BSPP
PZ1A0480001PD 4.8CC 3/8" BSPP 3/8" BSPP
PZ1A0550001PD 5.5CC 3/8" BSPP 3/8" BSPP
PZ1A0620001PD 6.2CC 3/8" BSPP 3/8" BSPP
PZ1A0780001PD 7.8CC 3/8" BSPP 3/8" BSPP
PZ1A0880001PD 8.8CC 3/8" BSPP 3/8" BSPP

CONNECTING KITS SUPPLIED WITH MULTIPLE PUMPS

Pumps 1.16
GROUP2PUMPS

PZ2AG
MODEL IDENTIFICATION CODE
PZ2-AG 04 C 0 34 D

MODEL SHAFT MODEL ROTATION

PZ2-AG ITALIAN STYLE A TAPER 1:5 0= PZ2-AG D=RIGHT HAND
PZ2-BG GERMAN STYLE B SPLINED 9T DIN 1= PZ2-BG S=LEFT HAND
PZ2-CG SAE STYLE C TAPER 1:8 2= PZ2-EG R=REVERSIBLE
PZ2-DG DEUTZ/IHC STYLE E PARALLEL 15MM 3= PZ2-DG
REAR/TANGE
PZ2-EG DRIVE F TANG 4= PZ2-CG
L PARALLEL 5/8"
TYPE - CAPACITY-cc p/rev S SPLINED 9T SAE A PORTS
04/06/08/11/14/17/20/25/31 32-FLANGE TYPE-4/6/8/11
TYPE-
33-FLANGE 14/17/20/25/31

34-BSPP TYPE-4/6/8/11
TYPE-
35-BSPP 14/17/20/25/31

36-FLANGE ALL
TYPE-
41-BSPP 14/17/20/25/31

AG - 19
BG - 19
CG - 19
DG - 16.5

Pumps 1.17
UseConditionsforGroup2Pumps
Mineral Oil (DIN 51524)
Hydraulic Fluids For use with fire resistant fluids like water glycol, water –
emulsion and phosphate esters, contact our technical or com-
mercial office
Inlet Pressure 0.7 - 3 Bar (Absolute)
Oil Speed on Suction Line 0.5 - 1.5 m/s
Oil Speed on pressure line 6 - 10 m/s
Oil Temperature -10 Deg C - 80 Deg C
Oil Viscosity 20 - 120 mm2/s (Cst)
Max starting viscosity 700 mm2 /s (Cst)
Pressure < 200 Bar > 200 Bar
Oil Filtration Contamination Class NAS 1638 10 9
Contamination Class ISO 4406 19/16 18/15
Ratio Bx 25µm 15µm

MainSpecifications
TYPE 04 06 08 11 14 17 20 25 31

Capacity Cm3 / Rev 4.4 6.28 8.16 11.3 14.45 16.95 20.1 25.75 31.4

P1 Max Working Pressure Bar 300 300 300 300 300 250 210 160 130

P2 Max Peak Pressure Bar 360 360 360 360 330 310 270 210 150

Max Speed for P1 Pressure Rpm 4500 4500 3700 3300 2700 2500 2500 2500 2200

Max Speed without Load Rpm 5500 5500 4700 4000 3300 3000 3000 3000 2700

Min Speed for P1 Pressure Rpm 1000 700 550 450 400 350 300 250 200

With bidirectional pumps or motors, pressure is reduced by 15% and the case drain must be fitted

Shaft Load Capacity

Shaft Code Shaft Description Max Torque (Nm)
A 1:5 Taper 110
B Din 5482 B17x 14 Spline 110
Important
C 1:8 Taper 150
E 15mm Str Keyed 75 When applying a multiple pump, the drive
shaft load is the sum of torque of each sec-
F Tang 75 tion.
L 5/8” Str Keyed 75
This value can not exceed the value in the
table.
M Tang 75
N 19mm Str Keyed 110
S SAE A 9T Spline 75

Pumps 1.18
GROUP2PUMPS

PZ2AG
GROUP 2
THREADED PORTS
1:8 TAPER SHAFT

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER CC Length PORTING
RH ROT LH ROT P/REV MM PRESSURE SUCTION
PZ2AG04C034TD PZ2AG04C034TS 4.40 88 ½” BSPP ½” BSPP
PZ2AG06C034TD PZ2AG06C034TS 6.28 91 ½” BSPP ½” BSPP
PZ2AG08C034TD PZ2AG08C034TS 8.16 94 ½” BSPP ½” BSPP
PZ2AG11C034TD PZ2AG11C034TS 11.30 107 ½” BSPP ½” BSPP
PZ2AG14C035TD PZ2AG14C035TS 14.45 112 ½” BSPP ¾” BSPP
PZ2AG17C035TD PZ2AG17C035TS 16.95 116 ½” BSPP ¾” BSPP
PZ2AG20C035TD PZ2AG20C035TS 20.10 121 ½” BSPP ¾” BSPP
PZ2AG25C035TD PZ2AG25C035TS 25.75 130 ½” BSPP ¾” BSPP
PZ2AG31C035TD PZ2AG31C035TS 31.40 139 ½” BSPP ¾” BSPP

TYPE 04 06 08 11 14 17 20 25 31

Capacity Cm3 / Rev 4.4 6.28 8.16 11.3 14.45 16.95 20.1 25.75 31.4
P1 Max Working Pressure Bar 300 300 300 300 300 250 210 160 130
P2 Max Peak Pressure Bar 360 360 360 360 330 310 270 210 150
Max Speed for P1 Pressure Rpm 4500 4500 3700 3300 2700 2500 2500 2500 2200
Max Speed without Load Rpm 5500 5500 4700 4000 3300 3000 3000 3000 2700
Min Speed for P1 Pressure Rpm 1000 700 550 450 400 350 300 250 200

SEALKITS
Part Number Description
PZ2A-SK Group 2 Body Seal Kit
PZ2A-SS Group 2 Shaft Seal

OPTIONS-Add to List Price

A 1:5 TAPER SHAFT
C 1:8 TAPER SHAFT
L 5/8” STRAIGHT KEYED SHAFT
S 9T SAE A SPLINED SHAFT
B 9T DIN 5482 B17 SPLINED SHAFT
AG FRONT FLANGE - GROUP 2 36MM SPIGOT
BG FRONT FLANGE - GERMAN 4 BOLT, 80MM SPIGOT
DG FRONT FLANGE KHD (DEUTZ) 50MM SPIGOT, 2 BOLT THROUGH
CG FRONT FLANGE SAE A 2 BOLT , 82.55MM SPIGOT

Pumps 1.19
GROUP2PUMPS

PZ2AG
GROUP 2
FLANGED PORTS
Flanged Ports
1:8 TAPER SHAFT

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER CC FLANGED PORTING
DIM DIM
P/ PRESSURE SUCTION
RH ROT LH ROT A B
REV D E F D E F
PZ2AG04C032D PZ2AG04C032S 4.40 44.5 88 30 13 M6 30 13 M6
PZ2AG06C032D PZ2AG06C032S 6.28 46 91 30 13 M6 30 13 M6
PZ2AG08C032D PZ2AG08C032S 8.16 47.5 94 30 13 M6 30 13 M6
PZ2AG11C033D PZ2AG11C033S 11.30 54 107 30 13 M6 30 13 M6
PZ2AG14C033D PZ2AG14C033S 14.45 56.5 112 30 13 M6 40 20 M8
PZ2AG17C033D PZ2AG17C033S 16.95 58.5 116 30 13 M6 40 20 M8
PZ2AG20C033D PZ2AG20C033S 20.10 61 121 30 13 M6 40 20 M8
PZ2AG25C033D PZ2AG25C033S 25.75 65.5 130 30 13 M6 40 20 M8
PZ2AG31C033D PZ2AG31C033S 31.40 70 139 30 13 M6 40 20 M8

TYPE 04 06 08 11 14 17 20 25 31

SEALKITS
Part Number Description
PZ2A-SK Group 2 Body Seal Kit
PZ2A-SS Group 2 Shaft Seal

OPTIONS-Add to List Price

A 1:5 TAPER SHAFT
C 1:8 TAPER SHAFT
L 5/8” STRAIGHT KEYED SHAFT
S 9T SAE A 5/8” SPLINED SHAFT
B 9T DIN 5482 B17 Ø16.5 SPLINED SHAFT
AG FRONT FLANGE - GROUP 2 36MM SPIGOT
BG FRONT FLANGE - GERMAN 4 BOLT, 80MM SPIGOT
DG FRONT FLANGE KHD (DEUTZ) 50MM SPIGOT, 2 BOLT THROUGH
CG FRONT FLANGE SAE A 2 BOLT , 82.55MM SPIGOT
Pumps 1.20
SAEAPUMPS

PZ2CG SAE A
SAE A 2 BOLT MOUNT
THREADED PORTS
SAE 5/8” KEYED SHAFT 5/32” Key
OR
SAE 9T SPLINED SHAFT

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER THREADED PORTING
CC DIM DIM
9T SAE A SPLINED
5/8” KEYED SHAFT P/REV A B PRESSURE SUCTION
SHAFT
PZ2CG04L4034T* PZ2CG04S4034T* 4.40 44.5 88 ½” BSPP ½” BSPP
PZ2CG06L4034T* PZ2CG06S4034T* 6.28 46 91 ½” BSPP ½” BSPP
PZ2CG08L4034T* PZ2CG08S4034T* 8.16 47.5 94 ½” BSPP ½” BSPP
PZ2CG11L4034T* PZ2CG11S4034T* 11.30 54 107 ½” BSPP ½” BSPP
PZ2CG14L4041T* PZ2CG14S4041T* 14.45 56.5 112 ¾” BSPP ¾” BSPP
PZ2CG17L4041T* PZ2CG17S4041T* 16.95 58.5 116 ¾” BSPP ¾” BSPP
PZ2CG20L4041T* PZ2CG20S4041T* 20.10 61 121 ¾” BSPP ¾” BSPP
PZ2CG25L4041T* PZ2CG25S4041T* 25.75 65.5 130 ¾” BSPP ¾” BSPP
PZ2CG31L4041T* PZ2CG31S4041T* 31.40 70 139 ¾” BSPP ¾” BSPP
* PLEASE NOMINATE RIGHT ( D ) OR LEFT ( S ) HAND ROTATION

TYPE 04 06 08 11 14 17 20 25 31

SEALKITS
Part Number Description
PZ2A-SK Group 2 Body Seal Kit
PZ2A-SS Group 2 Shaft Seal

OPTIONS – ADD TO LIST PRICE

Pumps 1.21
GERMANSTYLEPUMPS

PZ2BG 1:5 Taper

GERMAN STYLE German Style
80MM SPIGOT
1:5 TAPER SHAFT

SUCTION
PART NUMBER PRESS PORT
CC DIM DIM PORT
SHAFT
RH LH P/Rev A B
C D E C D E
Rotation Rotation
PZ2BG04A136D PZ2BG04A136S 4.40 TAPER 44.5 88 35 15 M6 40 20 M6
PZ2BG06A136D PZ2BG06A136S 6.28 TAPER 46 91 35 15 M6 40 20 M6
PZ2BG08A136D PZ2BG08A136S 8.16 TAPER 47.5 94 35 15 M6 40 20 M6
PZ2BG11A136D PZ2BG11A136S 11.30 TAPER 54 107 35 15 M6 40 20 M6
PZ2BG14A136D PZ2BG14A136S 14.45 TAPER 56.5 112 35 15 M6 40 20 M6
PZ2BG17A136D PZ2BG17A136S 16.95 TAPER 58.5 116 35 15 M6 40 20 M6
PZ2BG20A136D PZ2BG20A136S 20.10 TAPER 61 121 35 15 M6 40 20 M6
PZ2BG25A136D PZ2BG25A136S 25.75 TAPER 65.5 130 35 15 M6 40 20 M6

PZ2BG Splined 9T DIN

GERMAN STYLE German Style
80MM Spigot
SPLINED SHAFT 9T DIN

SUCTION
PART NUMBER PRESS PORT
CC DIM DIM PORT
SHAFT
RH LH P/Rev A B
C D E C D E
Rotation Rotation
PZ2BG04B136D PZ2BG04B136S 4.40 TAPER 44.5 88 35 15 M6 40 20 M6
PZ2BG06B136D PZ2BG06B136S 6.28 TAPER 46 91 35 15 M6 40 20 M6
PZ2BG08B136D PZ2BG08B136S 8.16 TAPER 47.5 94 35 15 M6 40 20 M6
PZ2BG11B136D PZ2BG11B136S 11.30 TAPER 54 107 35 15 M6 40 20 M6
PZ2BG14B136D PZ2BG14B136S 14.45 TAPER 56.5 112 35 15 M6 40 20 M6
PZ2BG17B136D PZ2BG17B136S 16.95 TAPER 58.5 116 35 15 M6 40 20 M6
PZ2BG20B136D PZ2BG20B136S 20.10 TAPER 61 121 35 15 M6 40 20 M6
PZ2BG25B136D PZ2BG25B136S 25.75 TAPER 65.5 130 35 15 M6 40 20 M6

OPTIONS – ADD TO LIST PRICE

Seal Kits A 1:5 TAPER SHAFT
PZ2A-SK Group 2 Body Seal Kit C 1:8 TAPER SHAFT

PZ2A-SS Group 2 Shaft Seal L 5/8” STRAIGHT KEYED SHAFT

Port Adaptors S 9T SAE A SPLINED SHAFT

B 9T DIN 5482 B17 SPLINED SHAFT

EBP-2 35mm PCD Port Adaptor
1/2” BSPP AG FRONT FLANGE - GROUP 2 36MM SPIGOT
EBP-4 40mm PCD Port Adaptor FRONT FLANGE - GERMAN 4 BOLT, 80MM SPIGOT
BG
3/4” BSPP
DG FRT FLGE KHD (DEUTZ) 50mm Spigot, 2 Bolt through

CG FRONT FLANGE SAE A 2 BOLT , 82.55MM SPIGOT

Pumps 1.22
DEUTZSTYLEPUMPS

PZ2DG 1:5 Taper

GERMAN STYLE Deutz Style
50MM SPIGOT
1:5 TAPER SHAFT
SUCTION
PART NUMBER PRESS PORT
CC DIM DIM PORT
SHAFT
RH LH P/Rev A B
C D E C D E
Rotation Rotation
PZ2DG04A136D PZ2DG04A136S 4.40 TAPER 44.5 88 35 15 M6 40 20 M6
PZ2DG06A136D PZ2DG06A136S 6.28 TAPER 46 91 35 15 M6 40 20 M6
PZ2DG08A136D PZ2DG08A136S 8.16 TAPER 47.5 94 35 15 M6 40 20 M6
PZ2DG11A136D PZ2DG11A136S 11.30 TAPER 54 107 35 15 M6 40 20 M6
PZ2DG14A136D PZ2DG14A136S 14.45 TAPER 56.5 112 35 15 M6 40 20 M6
PZ2DG17A136D PZ2DG17A136S 16.95 TAPER 58.5 116 35 15 M6 40 20 M6
PZ2DG20A136D PZ2DG20A136S 20.10 TAPER 61 121 35 15 M6 40 20 M6
PZ2DG25A136D PZ2DG25A136S 25.75 TAPER 65.5 130 35 15 M6 40 20 M6

PZ2DG Splined 9T DIN

GERMAN STYLE
Deutz Style
50MM Spigot
SPLINED SHAFT 9T DIN

SUCTION
PART NUMBER PRESS PORT
CC DIM DIM PORT
SHAFT
RH LH P/Rev A B
C D E C D E
Rotation Rotation
PZ2DG04B136D PZ2DG04B136S 4.40 TAPER 44.5 88 35 15 M6 40 20 M6
PZ2DG06B136D PZ2DG06B136S 6.28 TAPER 46 91 35 15 M6 40 20 M6
PZ2DG08B136D PZ2DG08B136S 8.16 TAPER 47.5 94 35 15 M6 40 20 M6
PZ2DG11B136D PZ2DG11B136S 11.30 TAPER 54 107 35 15 M6 40 20 M6
PZ2DG14B136D PZ2DG14B136S 14.45 TAPER 56.5 112 35 15 M6 40 20 M6
PZ2DG17B136D PZ2DG17B136S 16.95 TAPER 58.5 116 35 15 M6 40 20 M6
PZ2DG20B136D PZ2DG20B136S 20.10 TAPER 61 121 35 15 M6 40 20 M6
PZ2DG25B136D PZ2DG25B136S 25.75 TAPER 65.5 130 35 15 M6 40 20 M6

OPTIONS – ADD TO LIST PRICE

Seal Kits
A 1:5 TAPER SHAFT
PZ2A-SK Group 2 Body Seal Kit
C 1:8 TAPER SHAFT
PZ2A-SS Group 2 Shaft Seal
L 5/8” STRAIGHT KEYED SHAFT
Port Adaptors
S 9T SAE A SPLINED SHAFT
EBP-2 35mm PCD Port Adaptor 9T DIN 5482 B17 SPLINED SHAFT
B
1/2” BSPP
40mm PCD Port Adaptor AG FRONT FLANGE - GROUP 2 36MM SPIGOT
EBP-4
3/4” BSPP BG FRONT FLANGE - GERMAN 4 BOLT, 80MM SPIGOT

DG FRT FLGE KHD (DEUTZ) 50mm Spigot, 2 Bolt through

CG FRONT FLANGE SAE A 2 BOLT , 82.55MM SPIGOT

Pumps 1.23
MULTIPLEPUMPS

FRONTPUMPS

Group 2
1:8 Taper Shaft
BSPP Threaded Ports Group 2

CC
PART NUMBER PORTING DIMENSION
P/REV
RH ROT LH ROT PRESSURE SUCTION A B
PZ2AG04C034TD PZ2AG04C034TS 4.40 ½” BSPP ½” BSPP 89 44.5
PZ2AG06C034TD PZ2AG06C034TS 6.28 ½” BSPP ½” BSPP 92 46
PZ2AG08C034TD PZ2AG08C034TS 8.16 ½” BSPP ½” BSPP 95 47.5
PZ2AG11C034TD PZ2AG11C034TS 11.30 ½” BSPP ½” BSPP 108 54
PZ2AG14C035TD PZ2AG14C035TS 14.45 ½” BSPP ¾” BSPP 113 56.5
PZ2AG17C035TD PZ2AG17C035TS 16.95 ½” BSPP ¾” BSPP 117 58.5
PZ2AG20C035TD PZ2AG20C035TS 20.10 ½” BSPP ¾” BSPP 122 61
PZ2AG25C035TD PZ2AG25C035TS 25.75 ½” BSPP ¾” BSPP 131 65.5
PZ2AG31C035TD PZ2AG31C035TS 31.40 ½” BSPP ¾” BSPP 140 70

SAEA
SAE A 2 Bolt Mount
5/8” Straight Keyed
or
9T SAE A Spline FRONT PUMP
BSPP Threaded Ports

PART NUMBER THREADED PORTING DIMENSION

CC
9T SAE A SPLINED P/REV PRESSURE SUCTION
5/8” KEYED SHAFT A B
SHAFT
PZ2CG04L4034TD PZ2CG04S4034TS 4.40 ½” BSPP ½” BSPP 89 44.5
PZ2CG06L4034TD PZ2CG06S4034TS 6.28 ½” BSPP ½” BSPP 92 46
PZ2CG08L4034TD PZ2CG08S4034TS 8.16 ½” BSPP ½” BSPP 95 47.5
PZ2CG11L4034TD PZ2CG11S4034TS 11.30 ½” BSPP ½” BSPP 108 54
PZ2CG14L4041TD PZ2CG14S4041TS 14.45 ¾” BSPP ¾” BSPP 113 56.5
PZ2CG17L4041TD PZ2CG17S4041TS 16.95 ¾” BSPP ¾” BSPP 117 58.5
PZ2CG20L4041TD PZ2CG20S4041TS 20.10 ¾” BSPP ¾” BSPP 122 61
PZ2CG25L4041TD PZ2CG25S4041TS 25.75 ¾” BSPP ¾” BSPP 131 65.5
PZ2CG31L4041TD PZ2CG31S4041TS 31.40 ¾” BSPP ¾” BSPP 140 70

Pumps 1.24
MULTIPLEPUMPS

INTERMEDIATE

PART NUMBER CC PORTING

DIM L
RH ROT LH ROT P/REV PRESSURE SUCTION
PZ2AG04O034ID PZ2AG04O034IS 4.40 ½” BSPP ½” BSPP 51
PZ2AG06O034ID PZ2AG06O034IS 6.28 ½” BSPP ½” BSPP 54
PZ2AG08O034ID PZ2AG08O034IS 8.16 ½” BSPP ½” BSPP 57
PZ2AG11O034ID PZ2AG11O034IS 11.30 ½” BSPP ½” BSPP 70
PZ2AG14O035ID PZ2AG14O035IS 14.45 ½” BSPP ¾” BSPP 75
PZ2AG17O035ID PZ2AG17O035IS 16.95 ½” BSPP ¾” BSPP 79
PZ2AG20O035ID PZ2AG20O035IS 20.10 ½” BSPP ¾” BSPP 84
PZ2AG25O035ID PZ2AG25O035IS 25.75 ½” BSPP ¾” BSPP 93
PZ2AG31O035ID PZ2AG31O035IS 31.40 ½” BSPP ¾” BSPP 102

REARPUMP

PART NUMBER CC PORTING

GROUP1Rear
REARPUMP

PART NUMBER CC P/ PORTS

RH ROT LH ROT REV PRESSURE SUCTION + ADAPTOR
PZ1A0110001PD PZ1A0110001PS 1.1CC 3/8" BSPP 3/8" BSPP
PZ1A0160001PD PZ1A0160001PS 1.6CC 3/8" BSPP 3/8" BSPP
PZ1A0210001PD PZ1A0210001PS 2.1CC 3/8" BSPP 3/8" BSPP
PZ1A0260001PD PZ1A0260001PS 2.6CC 3/8" BSPP 3/8" BSPP
PZ1A0320001PD PZ1A0320001PS 3.2CC 3/8" BSPP 3/8" BSPP
PZ1A0370001PD PZ1A0370001PS 3.7CC 3/8" BSPP 3/8" BSPP
PZ1A0420001PD PZ1A0420001PS 4.2CC 3/8" BSPP 3/8" BSPP
PZ1A0480001PD PZ1A0480001PS 4.8CC 3/8" BSPP 3/8" BSPP
PZ1A0550001PD PZ1A0550001PS 5.5CC 3/8" BSPP 3/8" BSPP
PZ1A0620001PD PZ1A0620001PS 6.2CC 3/8" BSPP 3/8" BSPP
PZ1A0780001PD PZ1A0780001PS 7.8CC 3/8" BSPP 3/8" BSPP
PZ1A0880001PD PZ1A0880001PS 8.8CC 3/8" BSPP 3/8" BSPP
ADAPTOR KIT GRP 2 TO GRP 1
PART NUMBER FRT PUMP SIZE
K2000003 11, 14, 17, 20, 25, 31
K2000004 4, 6, 8

Maximum torque loading must conform to the limitations of splined shaft. Max torque is 27Nm

Pumps 1.25
GROUP3PUMPS

PZ3AG

MODEL IDENTIFICATION CODE

PZ3-AG 25 C 0 64 D

MODEL SHAFT MODEL ROTATION

PZ3-AG ITALIAN STYLE O European Mtg D=RIGHT HAND
PZ3-BG SAE B B Splined 7/8” 13T 3 SAE B Mtg S=LEFT HAND
C Taper 1:8 R=REVERSIBLE
L Straight Keyed 7/8”

TYPE - CAPACITY-cc p/rev PORTS

20, 25, 30, 35,40, 45, 55, 64,80 64 BSPP Ports

TYPE 20 25 30 35 40 45 55 64 80

Capacity Cm3 / Rev 19.9 24.9 29.9 34.3 40.5 45.2 54.5 63.9 78.7

P1 Max Working Pressure Bar 280 280 280 280 250 250 230 200 170

P2 Max Peak Pressure Bar 310 310 310 310 280 280 250 220 190

Max Speed for P1 Pressure Rpm 450 450 350 350 350 350 350 350 350

Max Speed without Load Rpm 3000 3000 3000 3000 2700 2700 2200 2000 1800

Nm 26.9 33.7 40.4 46.4 54.8 61.1 73.7 86.4 106.5

Kg 10.6 10.8 11 11.2 11.4 11.5 11.9 12.2 12.7

L mm 77 80 83.2 86 90 93 99 105 114.6

Pumps 1.26
GROUP3PUMPS

PZ3AG GROUP 3 1:8TaperShaft

1:8 Taper Shaft
BSPP Threaded Ports

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER Max
CC
Working PORTS
RH ROT P/REV
Pressure
PZ3AG25C064TD 25 280 Bar 1” BSPP
PZ3AG30C064TD 30 280 Bar 1” BSPP
PZ3AG35C064TD 35 280 Bar 1” BSPP
PZ3AG40C064TD 40 250 Bar 1” BSPP
PZ3AG45C064TD 45 250 Bar 1” BSPP
PZ3AG55C065TD 55 230 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3AG64C065TD 64 200 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3AG80C067TD 80 190 Bar 1 1/2” Suction 1¼” BSPP Pressure

PZ3BG SAE B
SAE B 2 Bolt Mount
7/8”StraightKeyedShaft
7/8” Straight Keyed Shaft
BSPP Threaded Ports

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER Max
CC
Working PORTS
RH ROT P/REV
Pressure
PZ3BG25L364TD 25 280 Bar 1” BSPP
PZ3BG30L364TD 30 280 Bar 1” BSPP
PZ3BG35L364TD 35 280 Bar 1” BSPP
PZ3BG40L364TD 40 250 Bar 1” BSPP
PZ3BG45L364TD 45 250 Bar 1” BSPP
PZ3BG55L365TD 55 230 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3BG64L365TD 64 200 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3BG80L367TD 80 190 Bar 1 1/2” Suction 1¼” BSPP Pressure

PZ3BG SAE B
SAE B 2 Bolt Mount 7/8”13TSplinedShaft
7/8” 13T Splined Shaft
BSPP Threaded Ports

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER Max
CC
Working PORTS
RH ROT P/REV
Pressure
PZ3BG25B364TD 25 280 Bar 1” BSPP
PZ3BG30B364TD 30 280 Bar 1” BSPP
PZ3BG35B364TD 35 280 Bar 1” BSPP
PZ3BG40B364TD 40 250 Bar 1” BSPP
PZ3BG45B364TD 45 250 Bar 1” BSPP
PZ3BG55B365TD 55 230 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3BG64B365TD 64 200 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3BG80B367TD 80 190 Bar 1 1/2” Suction 1¼” BSPP Pressure
Pumps
GROUP3PUMPS

CAST IRON PUMPS

Flanged Ports
1:8 Taper Shaft

PART NUMBER PORTING

CC
PRESSURE SUCTION
RH ROT LH ROT P/REV
E F G E F G
PW325DAC PW325SAC 24.9 40 20 M8 51 28 M10
PW335DAC PW335SAC 34.3 40 20 M8 51 28 M10
PW345DAC PW345SAC 45.2 40 20 M8 51 28 M10
PW355DAC PW355SAC 54.5 40 20 M8 51 28 M10
PW364DAC PW364SAC 63.9 51 28 M10 62 33 M12
PW380DAC PW380SAC 78.7 51 28 M10 62 33 M12

SPECIFICATIONS
Type 25 35 45 55 64 80

Capacity cc/rev. 24.9 34.3 45.2 54.5 63.9 78.7

Max. working pressure bar 300 280 250 230 200 170
Peak pressure bar 350 330 300 270 240 210
Max. speed for P1 press r.p.m. 3000 2500 2200 2000 2000 1800
Max. speed without load r.p.m. 3500 3000 2800 2500 2500 2200
Min.speed for P1(undirect.) . r.p.m 450 350 350 300 250 200
Overall dimensions A 169 175 182 188 193 203
B 122 128 135 141 146 156
C 76 82 89 95 85 95
D 127 127 127 127 132 132

Pumps 1.28
SAEBPUMPS

CAST IRON PUMPS

SAE B Mount
Splined Shaft
Threaded Ports

PART NUMBER CC PORTING

RH ROT Stamped P/REV PRESSURE SUCTION
PW315SAEBDAS 030W0015BOD 15.6 7/8 UNO 1 1/16 UNO
PW325SAEBDAS 030W0025BOD 24.9 7/8 UNO 1 1/16 UNO
PW335SAEBDAS 030W0035BOD 34.3 1 1/16 UNO 1 5/16 UNO
PW345SAEBDAS 030W0045BOD 45.2 1 1/16 UNO 1 5/8 UNO
PW355SAEBDAS 030W0055BOD 54.5 1 1/16 UNO 1 5/8 UNO
PW364SAEBDAS 030W0064BOD 63.9 1 5/16 UNO 1 5/8 UNO
PW380SAEBDAS 030W0080BOD 78.7 1 5/8 UNO 1 7/8 UNO

NFA Chelsea Mount

13T 7/8" Splined Shaft
Optional Rear Suction Port LH

PART NUMBER CC PORTING

LH ROT Stamped P/REV PRESSURE SUCTION
NFA35DPHS 032NF035DOS 34.3 1 1/16 UNO 1 5/16 UNO
NFA45DPHS 032NF045DOS 45.2 1 1/16 UNO 1 5/8 UNO
NFA55DPHS 032NF055DOS 54.5 1 1/16 UNO 1 5/8 UNO
NFA64DPHS 032NF064DOS 63.9 1 5/16 UNO 1 5/8 UNO
NFA80DPHS 032NF080DOS 78.7 1 5/8 UNO 1 7/8 UNO

SPECIFICATIONS
Type 15 25 35 45 55 64 80

Capacity cc/rev. 15.6 24.9 34.3 45.2 54.5 63.9 78.7

Max. working pressure bar 300 300 280 250 230 200 170
Peak pressure bar 350 350 330 300 270 240 210
Max. speed for P1 press r.p.m. 3000 3000 2500 2200 2000 2000 1800
Max. speed without load r.p.m. 3500 3500 3000 2800 2500 2500 2200
Min.speed for P1(undirect.) . r.p.m 450 450 350 350 300 250 200
Overall dimensions A 152 157 163 176 176 182 191
B 107 111 117 124 130 121 130
C 130 130 130 130 130 135 135

Pumps 1.29
GROUP3MULTIPLEPUMPS

PZ3AG GROUP 3
1:8 Taper Shaft FRONTPUMP
BSPP Threaded Ports

PZ3BG SAE B
FRONT PUMP
SAE B 2 Bolt Mount
7/8” Straight Keyed Shaft
BSPP Threaded Ports 7/8” Straight Keyed Shaft
CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER Max
CC
Working PORTS
RH ROT P/REV
Pressure
PZ3BG25L364TD 25 280 Bar 1” BSPP
PZ3BG30L364TD 30 280 Bar 1” BSPP
PZ3BG35L364TD 35 280 Bar 1” BSPP
PZ3BG40L364TD 40 250 Bar 1” BSPP
PZ3BG45L364TD 45 250 Bar 1” BSPP
PZ3BG55L365TD 55 230 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3BG64L365TD 64 200 Bar 1 ¼” Suction 1” BSPP Pressure
PZ3BG80L367TD 80 190 Bar 1 1/2” Suction 1¼” BSPP Pressure

PZ3BG SAE B FRONT PUMP

SAE B 2 Bolt Mount
7/8” 13T Splined Shaft
BSPP Threaded Ports 7/8” 13T Splined Shaft

Pumps 1.30
GROUP3MULTIPLEPUMPS

Intermediate Pump

CC
PART NUMBER
P/REV PORTS
RH ROT
PZ3AG250064ID 25 1” BSPP
PZ3AG300064ID 30 1” BSPP
PZ3AG350064ID 35 1” BSPP
PZ3AG400064ID 40 1” BSPP
PZ3AG450064ID 45 1” BSPP
PZ3AG550065ID 55 11/4” BSPP 1” BSPP
PZ3AG640065ID 64 11/4” BSPP 1” BSPP
PZ3AG800067ID 80 11/2” BSPP 1¼” BSPP

RearPump

CC
PART NUMBER
P/REV PORTS
RH ROT
PZ3AG250064PD 25 1” BSPP
PZ3AG300064PD 30 1” BSPP
PZ3AG350064PD 35 1” BSPP
PZ3AG400064PD 40 1” BSPP
PZ3AG450064PD 45 1” BSPP
PZ3AG550065PD 55 11/4” BSPP 1” BSPP
PZ3AG640065PD 64 11/4” BSPP 1” BSPP
PZ3AG800067PD 80 11/2” BSPP 1¼” BSPP

Assembly Kits
PART NUMBER DESCRIPTION
K3000029 PZ3 to PZ1 Group 3 to Group 1 Assembly Kit
K3000030 PZ3 to PZ2 Group 3 to Group 2 Assembly Kit
K3000034 PZ3 to PZ3 Group 3 to Group 3 Assembly Kit

Specifications (PZ3AG)
25 30 35 40 45 55 64 80
CC P/Rev 24.9 29.9 34.3 40.5 45.2 54.5 63.9 78.7
P1 Max working Pressure 280 280 280 250 250 230 200 170
P2 Peak Pressure for 5” 310 310 310 280 280 250 220 190
Min Speed for P1 450 350 350 350 350 350 350 350
Max Speed for P1 3000 3000 3000 2700 2700 2200 2000 1800
KG 10.8 11 11.2 11.4 11.5 11.9 12.2 12.7

Oil Viscosity @ 50˚C 2.5-6.5˚E

Pumps 1.31
GROUP3MULTIPLECASTPUMPS

Group 3
Flanged Ports
1:8 Taper Shaft
FrontPump
PART NUMBER PORTING
CC DIMENSION
PRESSURE SUCTION
RH ROT LH ROT P/REV
A B E F G E F G
PW3A25DAC PW3A25SAC 24.9 120.5 85 40 20 M8 51 28 M10
PW3A35DAC PW3A35SAC 34.3 124.5 82 40 20 M8 51 28 M10
PW3A45DAC PW3A45SAC 45.2 131.5 89 40 20 M8 51 28 M10
PW3A55DAC PW3A55SAC 54.5 137.5 95 40 20 M8 51 28 M10
PW3A64DAC PW3A64SAC 63.9 143.5 85.5 51 28 M10 62 33 M12
PW3A80DAC PW3A80SAC 78.7 153 95 51 28 M10 62 33 M12

RearPump
PART NUMBER PORTING
CC DIMENSION
PRESSURE SUCTION
RH ROT LH ROT P/REV
A B E F G E F G
PW3P25DAC PW3P25SAC 24.9 120.5 85 40 20 M8 51 28 M10
PW3P35DAC PW3P35SAC 34.3 124.5 82 40 20 M8 51 28 M10
PW3P45DAC PW3P45SAC 45.2 131.5 89 40 20 M8 51 28 M10
PW3P55DAC PW3P55SAC 54.5 137.5 95 40 20 M8 51 28 M10
PW3P64DAC PW3P64SAC 63.9 143.5 85.5 51 28 M10 62 33 M12
PW3P80DAC PW3P80SAC 78.7 153 95 51 28 M10 62 33 M12

STDGroup2Rear Aluminium

PART NUMBER CC PORTING

Pumps 1.32
AssemblyKits&SealKits

Assembly Kits
PART NUMBER DESCRIPTION PUMP TYPE + PUMP TYPE
K1000000 GRP1 T0 GRP1 PZ1A ALL PZ1A ALL
K2000000 GRP2 TO GRP 2 PZ2A31,25,20,17,14,11 PZ2A 31,25,20,17,14,11
K2000001 GRP2 TO GRP 2 PZ2A31,25,20,17,14,11 PZ2A 8, 6, 4
K2000002 GRP2 TO GRP 2 PZ2A 8, 6, 4 PZ2A 8, 6, 4
K2000003 GRP2 TO GRP1 PZ2A31,25,20,17,14,11 PZ1A-ALL
K2000004 GRP2 TO GRP1 PZ2A 8, 6, 4 PZ1A-ALL
K3000000 GRP3 TO GRP3 PW3 CAST PW3
K3000001 GRP3 TO GRP2 PW3 CAST PZ2A31,25,20,17,14,11
K3000002 GRP3 TO GRP2 PW3 CAST PZ2A 8, 6, 4

K3000029 GRP 3 to GRP 1 PZ3 to PZ1 Alloy

K3000030 GRP 3 to GRP 2 PZ3 to PZ2 Alloy
K3000034 GRP 3 to GRP 3 PZ3 to PZ3 Alloy

Seal Kits
PART NUMBER DESCRIPTION
PZ1A-SK GRP1 SEAL KIT
PZ1A-SS GRP1 SHAFT SEAL
PZ2A-SK GRP2 SEAL KIT
PZ2A-SS GRP2 SHAFT SEAL
PZ3A-SK GRP3 SEAL KIT
PZ3A-SS GRP3 SHAFT SEAL
PW3-SK GRP3 SEAL KIT
PW3-SS GRP3 SHAFT SEAL
MZ2A-SK GRP2 MOTOR SEAL KIT
MZ2A-SS GRP2 MOTOR SHAFT SEAL
MW3-SK GRP3 MOTOR SEAL KIT
MW3-SS GRP3 MOTOR SHAFT SEAL

Pumps 1.33
HANDPUMPS

Tankless with Lever No Relief

DISP MAX
PART NUMBER DESCRIPTION
CM3/CYCLE PRESSURE
HP1-20 TANKLESS HAND PUMP 20 CC 350
HP1-50 TANKLESS HAND PUMP 45CC 260

DISP MAX
PART NUMBER DESCRIPTION
CM3/CYCLE PRESSURE
HPT1-2-1 S/ACTING - 2 LITRE TANK 12 380
HPT2-2-1 S/ACTING - 2 LITRE TANK 25 350
HPT3-2-1 S/ACTING - 2 LITRE TANK 45 280
SINGLE ACTING WITH TANK & LEVER NO RELIEF

DISP MAX
PART NUMBER DESCRIPTION
CM3/CYCLE PRESSURE
HPTD1-2-1 D/ACTING - 2 LITRE TANK 12 380
HPTD2-2-1 D/ACTING - 2 LITRE TANK 25 350
HPTD3-2-1 D/ACTING - 2 LITRE TANK 45 280

DOUBLE ACTING WITH TANK & LEVER NO RELIEF

OPTIONAL TANKS
PART NUMBER DESCRIPTION

HP-2 2 LITRE
HP-3 3 LITRE
HP-5 5 LITRE
HP-7 7 LITRE
HP-10 10 LITRE

Pumps 1.34
Motor section
Including Brakes and Gear Boxes
Page

MZ2AG & PZ2CG Gear Motors 2.01

BMM 2.02
BMP & BMPH Specifications 2.03
BMP Motors 2.04
BMPH Motors 2.05
BMR & BMRS Specifications 2.06
BMR Motors 2.07
BMRS Motors 2.08
BMS Specifications 2.09
BMS Motors 2.010
BMT Motors 2.011
BMV Motors 2.012
BK2 Brake 2.013
HGB Gear Box 2.014
Special Motors 2.015
GEARMOTORS

MZ2AG
GROUP 2
THREADED PORTS
GROUP 2 Mount
1:8 TAPER SHAFT
CASE DRAIN

CASE DRAIN MUST BE FITTED

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER CC PORTING
RH ROT P/REV PRESSURE SUCTION DRAIN

MZ2AG06C034R 6.28 ½” BSPP ½” BSPP ¼” BSPP

MZ2AG08C034R 8.16 ½” BSPP ½” BSPP ¼” BSPP
MZ2AG11C034R 11.30 ½” BSPP ½” BSPP ¼” BSPP
MZ2AG14C041R 14.45 ¾” BSPP ¾” BSPP ¼” BSPP
MZ2AG17C041R 16.95 ¾” BSPP ¾” BSPP ¼” BSPP
MZ2AG20C041R 20.10 ¾” BSPP ¾” BSPP ¼” BSPP
MZ2AG25C041R 25.75 ¾” BSPP ¾” BSPP ¼” BSPP
MZ2AG31C041R 31.40 ¾” BSPP ¾” BSPP ¼” BSPP

PZ2-CG
SAE A 2 BOLT MOUNT
THREADED PORTS
SAE 5/8” KEYED SHAFT
OR SAEAMount
SAE 9T SPLINED SHAFT
BI ROTATIONAL

CASE DRAIN MUST BE FITTED

CAST IRON COVERS AND SPECIAL BUSHINGS, PROJECTED FOR HEAVY DUTY
PART NUMBER THREADED PORTING
CC
9T SAE A SPLINED
5/8” KEYED SHAFT P/REV PRESSURE SUCTION DRAIN
SHAFT

PZ2-CG06L4034R PZ2-CG06S4034R 6.28 ½” BSPP ½” BSPP 7/16 UNF

PZ2-CG08L4034R PZ2-CG08S4034R 8.16 ½” BSPP ½” BSPP 7/16 UNF
PZ2-CG11L4034R PZ2-CG11S4034R 11.30 ½” BSPP ½” BSPP 7/16 UNF
PZ2-CG14L4041R PZ2-CG14S4041R 14.45 ¾” BSPP ¾” BSPP 7/16 UNF
PZ2-CG17L4041R PZ2-CG17S4041R 16.95 ¾” BSPP ¾” BSPP 7/16 UNF
PZ2-CG20L4041R PZ2-CG20S4041R 20.10 ¾” BSPP ¾” BSPP 7/16 UNF
PZ2-CG25L4041R PZ2-CG25S4041R 25.75 ¾” BSPP ¾” BSPP 7/16 UNF
PZ2-CG31L4041R PZ2-CG31S4041R 31.40 ¾” BSPP ¾” BSPP 7/16 UNF

SEALKITS
PART NUMBER DESCRIPTION
MZ2A-SK GRP2 MOTOR SEAL KIT
MZ2A-SS GRP2 MOTOR SHAFT SEAL
MW3-SK GRP3 MOTOR SEAL KIT
MW3-SS GRP3 MOTOR SHAFT SEAL

HYDRAULICMOTORS 2.1
LOWSPEEDHIGHTORQUEMOTORS

BMM MOTORS
CC/REV PART NUMBER L L1
8cc/Rev BMM8-M-A-IE-00 104 3.5
20cc/Rev BMM20-M-A-IE-00 109 8.5
Rear Ports 32cc/Rev
40cc/Rev
BMM32-M-A-IE-00
BMM40-M-A-IE-00
114
117.5
13.5
17
3/8” BSPP
50cc/Rev BMM50-M-A-IE-00 122 21.5

BMM-SK Seal Kit

CC/REV PART NUMBER L L1

8cc/Rev BMM8-M-A-E-00 105 3.5
20cc/Rev BMM20-M-A-E-00 110 8.5
Side Ports 32cc/Rev BMM32-M-A-E-00 115 13.5
3/8” BSPP 40cc/Rev BMM40-M-A-E-00 118.5 17
50cc/Rev BMM50-M-A-E-00 123 21.5

BMM-SK Seal Kit

Pos 1 2 3 4 5 6 7
Disp
Code Flange Output Shaft Ports Rotation Paint
cc/rev

8 G3/8,G38 E
3-M6 Circle Flange, pilot
12.5 31.5x5 M ShaftØ16, parallel key 5x5x16 A 9/16-18UNF,3/8-24UNF U STD None
16 No
BMM 20 3-1/4-28UNF Circle Flange, pilot U ShaftØ15.875,parallel key 4.8x4.8x19.35 B Back port G3/8,G1/8 IE 00
31.5x5 Oppo- R Paint
32 F ShaftØ16.5,involute B17x14,DIN5482 C
Back port 9/16-18UNF, 3/8- IU site
40 2-9mm flange, pilot 63 x 2 24UNF
50

HYDRAULICMOTORS 2.2
BMP & BMPH
HYDRAULIC MOTORS

ORDERING CODE

1 2 3 4 5 6 7 8

BMP - - - - - - -

POS 1 2 3 4 5

Code Disp Flange Shaft Ports

25mm Metric
SAE A 2 Bolt 2 A
Parallel Key 8x7x32

36 1” (25.4mm)
None 50 SAE A 4 Bolt Parallel Key ½” BSPP D
4 C
80 Magneto 6.35x6.35x31.75
100
125 SAE 6B Splined
4 Bolt Square M10 H5 E
160 1” (25.4mm)
200
250 SAE A 2 Bolt H2
315
400 1” (25.4mm)
H K 7/8”-14 Oring S
Woodruff Key 25.4 x6.35
4 Bolt Square M10 H4

Main Specifications
BMP50 BMP80 BMP100 BMP125 BMP160 BMP200 BMP250 BMP315 BMP400

Geometric Displacement (cm 3/rev) 51.7 77.7 96.2 117.9 155.5 189.9 231 311.7 386.2
Rated 850 650 520 390 310 260 200 156 130
Max speed (rpm) Cont 879 740 589 475 370 296 237 189 149
Int 975 827 673 594 463 370 297 236 185
Rated 81 129 161 202 204 259 325 345 435
Max Torque
Cont 81 129 161 202 245 286 360 406 435
(N-m)
Int 106 171 213 268 342 390 456 505 533
Rated 7 8.6 8.6 8 6.5 6.9 6.6 5.5 5.8
Max Output
Cont 7 9.1 9 9.1 8.7 8.1 8.2 7.2 6.1
(Kw)
Int 8.9 11.8 11.9 11.8 11.9 10.9 10.1 8.6 7.2
Rated 12.5 12.5 12.5 12.5 10 10 10 8.5 8.5
Max Pressure Cont 12.5 12.5 12.5 12.5 12.5 11 11 11 10
Drop (Mpa) Int 16.5 16.5 16.5 16.5 16.5 16.5 14 12.5 10.5
Peak 16.5 16.5 16.5 16.5 16.5 16.5 14 12.5 10.5
Rated 45 55 55 55 55 55 55 55 55
Max Flow
Cont 45 60 60 60 60 60 60 60 60
(L/min)
Int 50 75 75 75 75 75 75 75 75
Weight (Kg) 5.6 5.7 5.9 6 6.2 6.4 6.6 6.9 7.4

HYDRAULICMOTORS 2.3
LOWSPEEDHIGHTORQUEMOTORS

GEROTOR MOTOR
2 BOLT SAE A MOUNT
BMP
SAE A 2 BOLT MOUNT
1” STRAIGHT KEYED SHAFT
½” BSPP PORTS

CC/REV PART NUMBER L L1

36CC BMP36-2-C-D 136 7
50CC BMP50-2-C-D 137 7
80CC BMP80-2-C-D 140.5 10.5
100CC BMP100-2-C-D 143 13
125CC BMP125-2-C-D 146 16
160CC BMP160-2-C-D 151 21
200CC BMP200-2-C-D 157 26
250CC BMP250-2-C-D 162 32
315CC BMP315-2-C-D 172 42
400CC BMP400-2-C-D 182 52

OPTIONS ADD TO LIST PRICE

MOUNTS
2 2 Bolt SAE A Mount STANDARD
H5 4 Bolt Square Mount M10
4 4 Bolt Magneto Mount
SHAFTS
C Ø 1” Keyed Shaft 25.4 (Key 6.35x6.35x31.75)
A Ø 25mm Keyed Shaft (Key8x7x32)
E 6B 1”Ø SAE 6B Splined Shaft
SEAL KIT
BMP-SK SEAL KIT

MOUNTS

2 H5 4
SAE A 2 BOLT 4 BOLT SQUARE 4 BOLT MAGNETO
Standard

SHAFTS
A Ø25mm C Ø 1” (25 .4mm) E 6B Splined 1” Ø

HYDRAULICMOTORS 2.4
LOWSPEEDHIGHTORQUEMOTORS
GEROTOR MOTOR
2 BOLT SAE A MOUNT

BMPH
SAE A 2 BOLT MOUNT
1” STRAIGHT KEYED SHAFT
7/8” O-ring PORTS

CC/REV PART NUMBER L L1

50CC BMPH50-H2-K-S 141 7
80CC BMPH80-H2-K-S 144.5 10.5
100CC BMPH100-H2-K-S 147 13
125CC BMPH125-H2-K-S 150 16
160CC BMPH160-H2-K-S 155 21
200CC BMPH200-H2-K-S 160 26
250CC BMPH250-H2-K-S 166 32
315CC BMPH315-H2-K-S 176 42
400CC BMPH400-H2-K-S 186 52

OPTIONS ADD TO LIST PRICE

MOUNTS
H2 2 Bolt SAE A Mount STANDARD
H4 4 Bolt Square Mount 3/8” unc

SHAFTS K Ø 1” Keyed Shaft 25.4 (Woodruff Key 6.35)

SEAL KIT
BMPH-SK SEAL KIT

MOUNTS SHAFTS

H2 H4 K Ø 1” (25.4mm)
SAE A 2 BOLT 4 BOLT SQUARE
Standard

HYDRAULICMOTORS 2.5
BMR &BMRS
HYDRAULIC MOTORS

ORDERING CODE
1 2 3 4 5 6 7 8

BMR - - - - - - -

POS 1 2 3 4 5

Code Disp Flange Shaft Ports

25mm Metric
SAE A 2 Bolt 2 A
Parallel Key 8x7x32
36
50 1” (25.4mm)
None 80 SAE A 4 Bolt Parallel Key ½” BSPP D
100 4 C
Magneto 6.35x6.35x31.75
125
160 SAE 6B Splined
4 Bolt Square M10 H5 E
200 1” (25.4mm)
250
315 SAE A 2 Bolt H2 1” (25.4mm)
400 Parallel Key
S K 7/8”-14 Oring S
4 Bolt Square M10 H4 6.35x6.35x31.75

Main Specifications
BMR50 BMR80 BMR100 BMR125 BMR160 BMR200 BMR250 BMR315 BMR400

Geometric Displacement (cm 3/rev) 51.3 80.6 100.8 124.9 157.2 199.2 252 314.5 370

Rated 755 750 600 475 375 300 240 190 160
Max speed (rpm)
Cont 970 940 750 600 470 375 300 240 200
Rated 100 160 200 250 320 330 352 360 420
Max Torque
Cont 100 190 240 292 363 358 352 360 420
(N-m)
Int 126 220 280 340 430 448 470 470 548
Rated 7.7 12.3 12.3 12 12.3 10 9 7 6.5
Max Output
Cont 7.7 15 15 14 14 11 9 7 6.6
(Kw)
Int 9.7 17 17 16 16 14 12 9 12
Rated 14 14 14 14 14 12 11 8.5 8.5
Max Pressure
Cont 14 17.5 17.5 17.5 16.5 13 11 8.5 8.5
Drop (Mpa)
Int 17.5 20 20 20 20 17.5 14 11.5 11.5

Max Flow Cont 40 60 60 60 60 60 60 60 60

(L/min) Int 50 75 75 75 75 75 75 75 75
Weight (Kg) 6.7 6.9 6.9 7.2 7.5 8.0 8.5 9 9.3

HYDRAULICMOTORS 2.6
LOWSPEEDHIGHTORQUEMOTORS
GEROLER MOTOR
2 BOLT SAE A MOUNT
BMR
SAE A 2 BOLT MOUNT
1” STRAIGHT KEYED SHAFT
½” BSPP PORTS

CC/REV PART NUMBER L L1

36CC BMR36-2-C-D 136 7
50CC BMR50-2-C-D 140 10
80CC BMR80-2-C-D 146 16
100CC BMR100-2-C-D 150 20
125CC BMR125-2-C-D 155 25
160CC BMR160-2-C-D 161.5 31.5
200CC BMR200-2-C-D 170 40
250CC BMR250-2-C-D 180 50
315CC BMR315-2-C-D 192 62
400CC BMR400-2-C-D 204 74

OPTIONS ADD TO LIST PRICE

MOUNTS
2 2 Bolt SAE A Mount STANDARD
H5 4 Bolt Square Mount M10
4 4 Bolt Magneto Mount

SHAFTS
C Ø 1” Keyed Shaft 25.4 (Key 6.35x6.35x31.75)
A Ø 25mm Keyed Shaft (Key8x7x32)
E 6B 1”Ø SAE 6B Splined Shaft
SEAL KIT
BMR-SK SEAL KIT

2 H5 4
SAE A 2 Bolt 4 Bolt Square 4 Bolt Magneto
Standard

A Ø25mm C Ø 1” (25.4mm) E 6B Splined 1” Ø

HYDRAULICMOTORS 2.7
LOWSPEEDHIGHTORQUEMOTORS
GEROLER MOTOR
2 BOLT SAE A MOUNT
BMRS
SAE A 2 BOLT MOUNT
1” STRAIGHT KEYED SHAFT
7/8 UNO PORTS

CC/REV PART NUMBER L L1

50CC BMRS50-H2-K-S 144 10
80CC BMRS80-H2-K-S 150 16
100CC BMRS100-H2-K-S 154 20
125CC BMRS125-H2-K-S 159 25
160CC BMRS160-H2-K-S 165 31.5
200CC BMRS200-H2-K-S 174 40
250CC BMRS250-H2-K-S 184 50
315CC BMRS315-H2-K-S 196 62
400CC BMRS400-H2-K-S 208 74

OPTIONS ADD TO LIST PRICE

MOUNTS
H2 2 Bolt SAE A Mount STANDARD
H4 4 Bolt Square Mount 3/8” unc

SHAFTS K Ø 1” Keyed Shaft 25.4 (Woodruff Key 6.35)

SEAL KIT
BMRS-SK SEAL KIT

Mounts Shafts
H2 H4 K
SAE A 2 BOLT 4 BOLT SQUARE Ø 1” (25.4mm)
Standard

HYDRAULICMOTORS 2.8
BMS

ORDERING CODE

1 2 3 4 5 6 7 8

BMS - - - - - - -

POS 1 2 3 4 5
Code Disp Flange Shaft Ports

32mm Metric
B
80 Parallel Key 10X8X45
100 SAE A 2 Bolt E2
125 11/4” (31.75mm)
Parallel Key G
None 160 ½” BSPP D
7.96X7.96X31.75
200
250 SAE A 4 Bolt E4
315
400 SAE C 14T Splined
14-DP12/24 F

Main Specifications
BMS80 BMS100 BMS125 BMS160 BMS200 BMS250 BMS315 BMS400

Geometric Displacement (cm 3/rev) 80.6 100.8 125 157.2 200 252 314.5 370

Rated 675 540 432 337 270 216 171 145

Max speed
Cont 800 748 600 470 375 300 240 200
(rpm)
Int 988 900 720 560 450 360 280 240
Rated 175 220 273 316 340 450 560 576

Max Torque Cont 190 240 310 316 400 450 560 576
(N-m) Int 240 300 370 430 466 540 658 700
Peak 260 320 400 472 650 690 840 740
Rated 12.4 12.4 12.4 11.2 9.6 10.2 10 8.6
Max Output
Cont 15.9 18.8 19.5 15.6 15.7 14.1 14.1 11.8
(Kw)
Int 20.1 23.5 23.2 21.2 18.3 17 18.9 17
Rated 16 16 16 15 12.5 12.5 12 10

Max Pressure Cont 17.5 17.5 17.5 15 14 12.5 12 10

Drop (Mpa) Int 21 21 21 21 16 16 14 12
Peak 22.5 22.5 22.5 22.5 22.5 20 18.5 14

Max Flow Cont 65 75 75 75 75 75 75 75

(L/min) Int 80 90 90 90 90 90 90 90
Rated 21 21 21 21 21 21 21 21
Max Inlet
Cont 25 25 25 25 25 25 25 25
Pressure
Int 30 30 30 30 30 30 30 30
Weight (Kg) 9.8 10 10.3 10.7 11.1 11.6 12.3 12.6

HYDRAULICMOTORS 2.9
LOWSPEEDHIGHTORQUEMOTORS
MOTOR
SAE A 2 & 4 BOLT MOUNT

BMS
SAE A 2 & 4 BOLT MOUNT
11/4” STRAIGHT KEYED SHAFT
½” BSPP PORTS
CC/REV PART NUMBER L L1 L2
80CC BMS80-E4-G-D 168 16 124
100CC BMS100-E4-G-D 172 20 128
125CC BMS125-E4-G-D 177 25 133
160CC BMS160-E4-G-D 183.5 31.5 139.5
200CC BMS200-E4-G-D 192 40 148
250CC BMS250-E4-G-D 202 50 158
315CC BMS315-E4-G-D 214 62 170
400CC BMS400-E4-G-D 226 74 182

OPTIONS ADD TO LIST PRICE

MOUNTS
E2 2 Bolt SAE A Mount
E4 4 Bolt Square Mount 3/8” unc

SHAFTS B Ø 32mm Metric Keyed Shaft 10x8x45

F Ø 1 1/4” (31.75mm) SAE C 14T Splined Shaft
G Ø 1 1/4” (31.75mm) Keyed Shaft 7.96x7.96x31.75 STD

SEAL KIT
BMS-SK SEAL KIT

MOUNTS

SHAFTS
B G F

HYDRAULICMOTORS 2.10
LOWSPEEDHIGHTORQUEMOTORS

BMT
4 BOLT MOUNT
40mm (Std) or 1 1/2” STRAIGHT KEYED SHAFT
3/4” BSPP PORTS

40mm Straight Keyed Shaft

CC/REV PART NUMBER L L1 L2
160 BMT160-4-M-G-00 193 17 142.5
200 BMT200-4-M-G-00 197 21 146.5
250 BMT250-4-M-G-00 203 27 152.5
315 BMT315-4-M-G-00 210 20 158.5
400 BMT400-4-M-G-00 217 27 165.5
500 BMT500-4-M-G-00 225 35 173.5
630 BMT630-4-M-G-00 237 47 185.5
800 BMT800-4-M-G-00 248 58 196.5
BMT-SK Seal Kit

1 1/2” Straight Keyed Shaft

CC/REV PART NUMBER L L1 L2
160 BMT160-4-G-G-00 193 17 142.5
200 BMT200-4-G-G-00 197 21 146.5
250 BMT250-4-G-G-00 203 27 152.5
315 BMT315-4-G-G-00 210 20 158.5
400 BMT400-4-G-G-00 217 27 165.5
500 BMT500-4-G-G-00 225 35 173.5
630 BMT630-4-G-G-00 237 47 185.5
800 BMT800-4-G-G-00 248 58 196.5
BMT-SK Seal Kit

BMT160 BMT200 BMT250 BMT315 BMT400 BMT500 BMT630 BMT800

Geometric Displacement (cm 3/rev) 161.1 201.4 251.8 326.3 410.9 523.6 629.1 801.8
Rated 470 475 381 294 228 183 150 121
Max speed
Cont 614 615 495 380 302 237 196 154
(rpm)
Int 770 743 592 458 364 284 233 185
Rated 379 471 582 758 896 1063 1156 1207
Max Torque Cont 471 589 727 962 1095 1245 1318 1464
(N-m) Int 573 718 888 1154 1269 1409 1498 1520
Peak 669 838 1036 1346 1450 1643 1618 1665
Rated 18.7 23.4 23.2 23.3 21.4 20.4 18.2 15.3
Max Output
Cont 27.7 34.9 34.5 34.9 31.2 28.8 25.3 22.2
(Kw)
Int 32 40 40 40 35 35 27.5 26.8
Rated 16 16 16 16 15 14 12 10.5
Max Pressure Cont 20 20 20 20 18 16 14 12.5
Drop (Mpa) Int 24 24 24 24 21 18 16 13
Peak 28 28 28 28 24 21 19 16
Rated 80 100 100 100 100 100 100 100
Max Flow Cont 100 125 125 125 125 125 125 125
(L/min)
Int 125 150 150 150 150 150 150 150
Rated 21 21 21 21 21 21 21 21
Max Inlet Cont 21 21 21 21 21 21 21 21
Pressure Int 25 25 25 25 25 25 25 25
Peak 30 30 30 30 30 30 30 30
Weight (Kg) 19.5 20 20.4 21 22 23 24 25

HYDRAULICMOTORS 2.11
LOWSPEEDHIGHTORQUEMOTORS

BMV
4 BOLT MOUNT
50mm (Std) STRAIGHT KEYED SHAFT
1” BSPP PORTS

50mm Straight Keyed Shaft

CC/REV PART NUMBER L L1 L2
315 BMV315-4-A-G-00 217 27 161.5
400 BMV400-4-A-G-00 224 34 168.5
500 BMV500-4-A-G-00 232 42 176.5
630 BMV630-4-A-G-00 244 54 188.5
800 BMV800-4-A-G-00 255 65 199.5
BMV-SK Seal Kit

BMV315 BMV400 BMV500 BMV630 BMV800

Geometric Displacement (cm 3/rev) 333 419 518 666 801

Rated 335 270 215 170 140
Max speed
Cont 446 354 386 223 185
(rpm)
Int 649 526 425 331 275
Rated 730 1020 1210 1422 1590
Max Torque Cont 925 1220 1450 1640 1810
(N-m) Int 1100 1439 1780 2000 2110
Peak 1349 1700 2121 2338 2470
Rated 25.6 28.8 27.2 25.3 23.3
Max Output
Cont 43 45.2 58.6 38.3 35.1
(Kw)
Int 52 52 52 46 40
Rated 16 16 16 16 14
Max Pressure Cont 20 20 20 18 16
Drop (Mpa) Int 24 24 24 21 18
Peak 28 28 28 24 21
Rated 110 110 110 110 110
Max Flow Cont 150 150 150 150 150
(L/min)
Int 225 225 225 225 225
Rated 21 21 21 21 21
Max Inlet Cont 21 21 21 21 21
Pressure Int 25 25 25 25 25
Peak 30 30 30 30 30
Weight (Kg) 31.8 32.6 33.5 34.9 36.5

HYDRAULICMOTORS 2.12
HydraulicBrake

Model Input Shaft Output Shaft Torque Max Pressure

BK2-1-430-E-B 1” 6B Spline 32mm Str Keyed
BK2-1-430-E-C 1” 6B Spline 1” Str Keyed
BK2-1-430-B-B 32mm Str Keyed 32mm Str Keyed 410-450 Nm 300 Bar

BK2-1-430-C-C 1” Str Keyed 1” Str Keyed

BK2-1-430-G-G 1 1/4” Str Keyed 1 1/4” Str Keyed

Pos 1 2 3 4 5
Series Type Torque Input Shaft Output Shaft

25mm Parallel key 8x7x32 A 25mm Parallel key 8x7x32 A

200-220 NM 210 32mm Parallel Key 10x8x45 B 32mm Parallel Key 10x8x45 B

1 1” Parallel Key 6.35x6.35x31.75 C C

1” Parallel Key 6.35x6.35x31.75
410-450 NM 430 1” 6B Spline E E
BK2 1” 6B Spline
1 1/4” Parallel key 7.96x7.96x31.75 G G
1 1/4” Parallel key 7.96x7.96x31.75

2 410-450NM 430 6T Splined Shaft 6-30x26x6 N 6T Splined Shaft 6-30x26x6 N

C Drain Port - G1/4” 9mm Depth

D Brake Release Port - G1/4” 9mm Depth

Item BK2-1 BK2-2

Min static Torque NM 200-230 410-450 410.450
Min Opening Pressure MPa 1.7-2.3
Max Opening Pressure MPa 30
Min oil quantity for brake releasing cm3 7-8
Oil Volume cm3 50-120
Max Pressure in drain space MPa 0.05
Weight Kg 9 9.5
*Static torque is obtained at 0 MPa working pressure

HYDRAULICMOTORS 2.13
PlanetaryGearBox

Model Input Shaft Output Shaft Max Torque Ratio

HGB3.65EA 1” 6B Splined 50mm Str Keyed 2000NM 3.65:1

HYDRAULICMOTORS 2.14
SPECIALMOTORS

Group3Bi-directionalGearMotor

Group 3 Cast Iron Gear Motor

With Group 3.5 Flange
64cc
30mm Straight Keyed Shaft
1” BSPP Ports
3/8” BSPP Case Drain
030W0MD64G564XR0BN

Screen Motors

Group3LeftHandGearMotor

Group 3 Cast Iron Gear Motor

35cc
1:8 Tapered Keyed Shaft
Flanged Ports
No Case Drain
MW335-S
03MW003500S
Milk Tanker Motors

HYDRAULICMOTORS 2.15
Industrial Valve Section
Page

Cetop 3 (NG6) Solenoid Valves 3.01

Cetop 3 (NG6) Lever Operated 3.01
Cetop 3 (NG6) Manifolds. Subplates & Spares 3.02
Cetop 5 (NG10) Solenoid Valves 3.03
Cetop 5 (NG10) Manifolds, Subplates & Spares 3.04
Cetop 7 & 8 (NG16 & 25) Solenoid Valves 3.05
Cetop 7 & 8 Subplates & Manifolds 3.06
Cetop 3 & Cetop 5 SOFTSWITCHING Solenoid Valves 3.07
6 Port Solenoid Operated Selector Valves 3.08
Atos Industrial and Proportional Valves 3.09 - 3.013
Modular Valves Cetop 3 & 5 3.014- 3.016
Atos Modular Valves Cetop 3 3.017
Atos Modular Valves Cetop 5 3.018
Cetop3(NG6)SolenoidValves

4WE6 Solenoid Operated Directional Valve

CETOP 3 (NG 6)
INDUSTRIAL VALVES

Each valve is supplied with LED Din Plugs and bolts

@ v = 41mm2/s and t = 50 oC
Switching Approx
SYMBOL Power Limits Pressure Kg PART NUMBER VOLTAGE
Max Flow drop at
@ 200 Bar 30LPM
SOL 70 LPM 3 Bar 1.65 4WE6C60/E(voltage)N9K4Z5LS
SOL 70 LPM 3 Bar 1.65 4WE6D60/E(voltage)N9K4Z5LS G12
SOL 80 LPM 3 Bar 1.65 4WE6EA60/E(voltage)N9K4Z5LS
SOL 50 LPM 5 Bar 1.65 4WE6GA60/E(voltage)N9K4Z5LS G24
SOL 50 LPM 3 Bar 1.65 4WE6HA60/E(voltage)N9K4Z5LS
SOL 80 LPM 3 Bar 1.65 4WE6JA60/E(voltage)N9K4Z5LS RAC110
80 LPM 3 Bar 2.25 4WE6E60/E(voltage)N9K4Z5LS
50 LPM 5 Bar 2.25 4WE6G60/E(voltage)N9K4Z5LS RAC220
50 LPM 3 Bar 2.25 4WE6H60/E(voltage)N9K4Z5LS
80 LPM 3 Bar 2.25 4WE6J60/E(voltage)N9K4Z5LS

The switching power limits given are for featuring two flow directions. (eg. from P to A and simultaneous return flow from B to T) Due to
the flow forces active within the valves the permitted power limit maybe considerably less where there is only one direction of flow. The
power limit was determined using solenoids at their operating temperature, 10% under voltage and with no preloading of the tank.
Note: Refer technical data sheet for precise specifications. Copies can be supplied on request.

Cetop 3 Lever Operated

Spring Centered or Detented
@ v = 41mm2/s and t = 50 oC
Approx Pres- Kg Part Number Spool Contol
SYMBOL Max Flow sure drop at
30LPM
60 LPM 3 Bar 1.4 4WMM6D Spring Return
60 LPM 3 Bar 1.4 4WMM6E Spring Return
40 LPM 5 Bar 1.4 4WMM6G Spring Return
60 LPM 3 Bar 1.4 4WMM6H Spring Return
60 LPM 3 Bar 1.4 4WMM6J Spring Return
60 LPM 3 Bar 1.4 4WMM6D-F 2 Pos Detent
60 LPM 3 Bar 1.4 4WMM6E-F 3 Pos Detent
40 LPM 5 Bar 1.4 4WMM6G-F 3 Pos Detent
60 LPM 3 Bar 1.4 4WMM6H-F 3 Pos Detent
60 LPM 3 Bar 1.4 4WMM6J-F 3 Pos Detent

INDUSTRIALVALVES 3.1
Cetop3Accessories

Subplates
Part Number Material Ports Description
THSPC3SA Alloy 3/8” Subplate Side Ports A,B,P&T
THSPC3BA Alloy 3/8” Subplate Rear Ports A,B,P&T
BEC3VLP4002 Alloy 3/8” Rear P&T, Side A&B with Relief
BEC3VLP40RFP50 Alloy 3/8” Subplate with Relief & Priority Flow

Multi Station Manifolds

Part Number Material P&T A&B Description
THMC3P1AC Alloy 1/2” 3/8” Manifold Single Station with relief Cavity
THMC3P2AC Alloy 1/2” 3/8” 2 Station
THMC3P3AC Alloy 1/2” 3/8” 3 Station
THMC3P4AC Alloy 1/2” 3/8” 4 Station
THMC3P5AC Alloy 1/2” 3/8” 5 Station
THMC3P6AC Alloy 1/2” 3/8” 6 Station
LPSRV2-10 Pilot Operated Relief Valve
THRC-PLUG Blanking Plug Relief Cavity

Steel Subplates and Manifolds available

See Section 4

SPARE PARTS
BOLTS COILS DIN PLUGS
PART NO PART NO VOLT DESCRIPTION PART NO

M5X45 SHCS 4WE6A-D12 12VDC DIN PLUG - BLACK 18209N

M5X50 SHCS 4WE6A-D24 24VDC DIN PLUG – GREY 18209G

M5X70 SHCS 4WE6A-R110 110VAC 12V or 24VDC LED 18209-10-50V

M5X80 SHCS 4WE6A-R220 240VAC 12V or 24V LED & Supp 18209-10-50V-S

M5X90 SHCS 110V LED 18209-110V

M5X110 SHCS 4WE6-NUT 240V LED 18209-240V

M5X130 SHCS RECTIFIER 110V 18209-110RAC

M5X140 SHCS RECTIFIER 240V 18209-240RAC

INDUSTRIALVALVES 3.2
Cetop5(NG10)SolenoidValves
4WE10 Solenoid Operated Directional Valve

CETOP 5 (NG 10)

INDUSTRIAL VALVES

Each valve is supplied with LED Din Plugs and bolts

@ v = 41mm2/s and t = 50 oC
Switching Approx
SYMBOL Power Limits Pressure Kg PART NUMBER VOLTAGE
Max Flow drop at
@ 200 Bar 60LPM
SOL 120 LPM 2.5 Bar 4.8 4WE10C60/C(voltage)N9K4Z5LS

SOL 120 LPM 2.5Bar 4.8 4WE10D60/C(voltage)N9K4Z5LS G12

SOL 120 LPM 2.5 Bar 4.8 4WE10EA60/C(voltage)N9K4Z5LS

SOL 75 LPM 5 Bar 4.8 4WE10GA60/C(voltage)N9K4Z5LS G24

SOL 100 LPM 3 Bar 4.8 4WE10HA60/C(voltage)N9K4Z5LS

SOL 115 LPM 2 Bar 4.8 4WE10JA60/C(voltage)N9K4Z5LS RAC110

120 LPM 2.5 Bar 6.15 4WE10E60/C(voltage)N9K4Z5LS

75 LPM 5 Bar 6.15 4WE10G60/C(voltage)N9K4Z5LS RAC220

100 LPM 3 Bar 6.15 4WE10H60/C(voltage)N9K4Z5LS
115 LPM 2 Bar 6.15 4WE10J60/C(voltage)N9K4Z5LS

The switching power limits given are for featuring two flow directions. (eg. from P to A and simultaneous return flow from B to T) Due to the
flow forces active within the valves the permitted power limit maybe considerably less where there is only one
direction of flow. The power limit was determined using
age and with no preloading of the tank. Spare Parts solenoids at their operating temperature, 10% under volt-

Part Number Description

4WE10A-D12 12VDC Coil
4WE10A-D24 24VDC Coil
4WE10A-R110 110V Rectified AC Coil
4WE10A-R220 220V Rectified AC Coil

4WE-6 4WE-10
Weight Single Solenoid Valve kg 1.65 4.80
Valve with 2 Solenoids kg 2.25 6.15
Operating Pressure Ports A, B, P MPA 35 31.5
Port T MPA Up to 21
Flow Max (see Power Limit Charts) L/Min Up to 80 L/Min Up to 120 L/Min
Ambient Temperature Max Upto 500C
Fluid Temperature Range O
C -30 to + 80 (NBR seals)
Viscosity Range mm2/S 2.8 to 500
Degree of fluid contamination Maximum permissible degree of contamination of fluid is to NAS 1638 class 9. We, there-
fore recommend a minimum retention of 10.

INDUSTRIALVALVES 3.3
Cetop5Accessories

Subplates
Part Number Material Ports Description
THSPC5SA Alloy 1/2” Subplate Side Ports A,B,P&T
THSPC5BA Alloy 1/2” Subplate Rear Ports A,B,P&T
BEC5VLP8002 Alloy 1/2” Rear P&T, Side A&B with Relief

Multi Station Manifolds

Part Number Material P&T A&B Description
THMC5P1AC Alloy 3/4” 1/2” Manifold Single Station with relief Cavity
THMC5P2AC Alloy 3/4” 1/2” 2 Station
THMC5P3AC Alloy 3/4” 1/2” 3 Station
THMC5P4AC Alloy 3/4” 1/2” 4 Station
THMC5P5AC Alloy 3/4” 1/2” 5 Station
THMC5P6AC Alloy 3/4” 1/2” 6 Station
LPSRV2-10 Pilot Operated Relief Valve
THRC-PLUG Blanking Plug Relief Cavity

Steel Subplates and Manifolds available

See Section 4

SPARE PARTS
BOLTS COILS DIN PLUGS
PART NO PART NO VOLT DESCRIPTION PART NO
M6X40 SHCS (STD) 4WE10A-D12 12VDC DIN PLUG - BLACK 18209N
M6X50 SHCS 4WE10A-D24 24VDC DIN PLUG – GREY 18209G
1
M6X70 SHCS . 4WE10A-R110 110VAC 12V or 24VDC LED 18209-10-50V
0
M6X80 SHCS 4WE610-R220 240VAC 12V or 24V LED & Supp 18209-10-50V-S
0
M6X90 SHCS 110V LED 18209-110V
M6X140 SHCS 4WE10-NUT 240V LED 18209-240V
M6X150 SHCS RECTIFIER 110V 18209-110RAC
RECTIFIER 240V 18209-240RAC

INDUSTRIALVALVES 3.4
Cetop7(NG16)&Cetop8(NG22,NG25)SolenoidValves

4WE16 Solenoid Operated Directional Valve

CETOP 7 (NG 16)

INDUSTRIAL VALVES

SOL 240 LPM 7 Bar 8.3 4WEH16GA-A-(voltage)-6X

300 LPM 5 Bar 8.3 4WEH16HA-A-(voltage)-6X D24
SOL
SOL 300 LPM 5 Bar 8.3 4WEH16JA-A-(voltage)-6X
R110
300 LPM 4 Bar 8.6 4WEH16E-A-(voltage)-6X
240 LPM 7 Bar 8.6 4WEH16G-A-(voltage)-6X
R220
300 LPM 5 Bar 8.6 4WEH16H-A-(voltage)-6X
300 LPM 5 Bar 8.6 4WEH16J-A-(voltage)-6X
PILOT PRESSURE INSERT 4WH16PI

4WE22 Solenoid Operated Directional Valve

CETOP 8 (NG 22)

INDUSTRIAL VALVES

Each Valve includes Solenoid pilot Valve, LED Din Plugs and bolts
@ v = 41mm2/s and t = 50 oC
Switching Power Approx
SYMBOL Limits Pressure Kg PART NUMBER VOLTAGE
Max Flow drop at
@ 210 Bar 300LPM
SOL 450 LPM 5Bar 11.5 4WEH22D-A-(voltage)-6X
D12
SOL 450 LPM 6 Bar 11.5 4WEH22EA-A-(voltage)-6X
SOL 250 LPM 8 Bar 11.5 4WEH22GA-A-(voltage)-6X D24
SOL 300 LPM 5 Bar 11.5 4WEH22HA-A-(voltage)-6X
SOL 450 LPM 5 Bar 11.5 4WEH22JA-A-(voltage)-6X R110
450 LPM 6 Bar 11.9 4WEH22E-A-(voltage)-6X
250 LPM 8 Bar 11.9 4WEH22G-A-(voltage)-6X R220
300 LPM 5 Bar 11.9 4WEH22H-A-(voltage)-6X
450 LPM 5 Bar 11.9 4WEH22J-A-(voltage)-6X

Valves include Solenoid pilot valve, LED Din plugs. They come standard as external pilot and external drain. Other configurations are available
by removing or replacing plugs as required. For the G and H spools a pilot pressure insert is available for internal pilot.
The pilot pressure insert transfers the required pilot pressure to the solenoid pilot valve which activates the main stage.

INDUSTRIALVALVES 3.5
Cetop7(NG16) Subplates&Manifolds

Subplates
Part Number Material Ports Description
THSPC7SS Steel 1” and 1/4” X&Y Subplate Side Ports A,B,P,T.X &Y
THSPC7BS Steel 1” and 1/4” X&Y Subplate Rear Ports A,B,P,T. X &Y

Manifolds
Part Number Material P,A &B T X &Y Description
THMC7P1SC Steel 3/4” 1” 1/4” & 3/8” Manifold Single Station with relief Cavity
THMC7P2SC Steel 3/4” 1” 1/4” & 3/8” 2 Station
THMC7P3SC Steel 3/4” 1” 1/4” & 3/8” 3 Station
LPSRV2-10 Pilot Operated Relief Valve
THRC-PLUG Blanking Plug Relief Cavity

INDUSTRIALVALVES 3.6
Cetop3and5(NG6&10)SolenoidValves

SOFT SWITCH
4WE6S Solenoid Operated Directional Valve

CETOP 3 (NG 6)
INDUSTRIAL VALVES
WITH SOFT SWITCHING

@ v = 41mm2/s and t = 50 oC
Switching Approx
SYMBOL Power Limits Pressure Kg PART NUMBER VOLTAGE
Max Flow drop at
@ 200 Bar 30LPM
80 LPM 3 Bar 2.25 4WE6SE60/E(Voltage)N9K4Z5LS
G12

50 LPM 5 Bar 2.25 4WE6SG60/E(Voltage)N9K4Z5LS G24

RAC110
50 LPM 3 Bar 2.25 4WE6SH60/E(Voltage)N9K4Z5LS
RAC220
80 LPM 3 Bar 2.25 4WE6SJ60/E(Voltage)N9K4Z5LS

4WE10S Solenoid Operated Directional Valve

CETOP 5 (NG 10)

INDUSTRIAL VALVES
WITH SOFT SWITCHING
@ v = 41mm2/s and t = 50 oC
Switching Approx
SYMBOL Power Limits Pressure Kg PART NUMBER VOLTAGE
Max Flow drop at
@ 200 Bar 60LPM
120 LPM 2.5 Bar 6.15 4WE10SE60/C(Voltage)N9K4Z5LS G12

75 LPM 5 Bar 6.15 4WE10SG60/C(Voltage)N9K4Z5LS G24

100 LPM 3 Bar 6.15 4WE10SH60/C(Voltage)N9K4Z5LS RAC110

RAC220
120 LPM 2.5 Bar 6.15 4WE10SJ60/C(Voltage)N9K4Z5LS

INDUSTRIALVALVES 3.7
6PortSolenoidOperatedSelectorValves

Single or Stackable
6 Port Selector Valves
3/8” or 1/2” BSPP Ports
12 & 24 VDC

Part Number Ports Max Flow Max Pressure Voltage

HYE6238-D12 3/8” BSPP 40 LPM 250 Bar 12 VDC

HYE6238-D24 3/8” BSPP 40 LPM 250 Bar 24 VDC

HYE6212-D12 1/2” BSPP 60 LPM 250 Bar 12 VDC

HYE6212-D24 1/2” BSPP 60 LPM 250 Bar 24 VDC

Specifications E6238 E6212

Max Pressure 250 Bar
Max Flow Rate 40 LPM 60 LPM
Hydraulic Fluid Mineral oil, Phosphate Ester
Fluid Temperature Range -20~80°C
Recommended Viscosity 10~400mm²

INDUSTRIALVALVES 3.8
ATOSCetop3and5(NG6&10)SolenoidValves

CETOP 3 (NG 6)

SYMBOL TRANSITION SPOOL Kg PART NUMBER VOLTAGE

0 1.8 DHI-0710-X- (VOLTAGE)
1 1.8 DHI-0711-X- (VOLTAGE) 12DC

3 1.8 DHI-0713-X- (VOLTAGE)

4 1.8 DHI-0714-X- (VOLTAGE)
8 1.8 DHI-0718-X- (VOLTAGE) 24DC

Sol 0-2 1.5 DHI-0630/2-X- (VOLTAGE)

Sol 1-2 1.5 DHI-0631/2-X- (VOLTAGE)
110AC
Sol 1-2A 1.5 DHI-0631/2-A-X- (VOLTAGE)
Sol 0 1.5 DHI-0610-X- (VOLTAGE)
Sol 1 1.5 DHI-0611-X- (VOLTAGE)
240AC
Sol 3 1.5 DHI-0613-X- (VOLTAGE)
Sol 4 1.5 DHI-0614-X- (VOLTAGE)

SPARE PARTS
BOLTS COILS DIN PLUGS
PART NO PART NO VOLT DESCRIPTION PART NO
M5X45 SHCS SP-COU-12DC 12VDC DIN PLUG - BLACK 18209N

M5X50 SHCS SP-COU-24DC 24VDC DIN PLUG – GREY 18209G

M5X70 SHCS SP-COI-110AC 110VAC 12V or 24VDC LED 18209-10-50V

M5X80 SHCS SP-COI-240AC 240VAC 12V or 24V LED & Supp 18209-10-50V-S

M5X90 SHCS 110V LED 18209-110V

M5X110 SHCS 240V LED 18209-240V

M5X130 SHCS RECTIFIER 110V 18209-110RAC

M5X140 SHCS RECTIFIER 240V 18209-240RAC

INDUSTRIALVALVES 3.9
ATOSCetop5(NG10)SolenoidValves(DKIOldSeries)

CETOP 5 (NG10)
(DKI OLD SERIES)

SYMBOL TRANSITION SPOOL Kg PART NUMBER VOLTAGE

0 4.4 DKI-1710-X- (VOLTAGE)
1 4.4 DKI-1711-X- (VOLTAGE) 12DC
3 4.4 DKI-1713-X- (VOLTAGE)
4 4.4 DKI-1714-X- (VOLTAGE)
8 4.4 DKI-1718-X- (VOLTAGE) 24DC
Sol 0-2 3.8 DKI-1630/2-X- (VOLTAGE)
Sol 1-2 3.8 DKI-1631/2-X- (VOLTAGE)
Sol 1-2A 3.8 DKI-1631/2-A-X- (VOLTAGE) 110AC
Sol 0 3.8 DKI-1610-X- (VOLTAGE)
Sol 1 3.8 DKI-1611-X- (VOLTAGE)
Sol 3 3.8 DKI-1613-X- (VOLTAGE) 240AC
Sol 4 3.8 DKI-1614-X- (VOLTAGE)

SOFT SWITCH OPTION (DC ONLY)

0 4.4 DKU-1710/L1-X- (VOLTAGE)

12DC
1 4.4 DKU-1711/L1-X- (VOLTAGE)
3 4.4 DKU-1713/L1-X- (VOLTAGE)
24DC
4 4.4 DKU-1714/L1-X- (VOLTAGE)

SPARE PARTS
BOLTS COILS DIN PLUGS
PART NO PART NO VOLT DESCRIPTION PART NO
M6X40 SHCS (STD) SP-CAU-12DC 12VDC DIN PLUG - BLACK 18209N
M6X50 SHCS SP-CAU-24DC 24VDC DIN PLUG – GREY 18209G
M6X70 SHCS SP-CAI-110AC 110VAC 12V or 24VDC LED 18209-10-50V
M6X80 SHCS SP-CAI-240AC 240VAC 12V or 24V LED & Supp 18209-10-50V-S
M6X90 SHCS 110V LED 18209-110V
M6X140 SHCS 240V LED 18209-240V
M6X150 SHCS RECTIFIER 110V 18209-110RAC
RECTIFIER 240V 18209-240RAC

INDUSTRIALVALVES 3.10
ATOSCetop5(NG10)SolenoidValves(DKESeries)

CETOP 5 (NG10)
INDUSTRIAL VALVES
(DKE NEW SERIES)

SYMBOL TRANSITION SPOOL Kg PART NUMBER VOLTAGE

0 4.4 DKE-1710-X- (VOLTAGE)
1 4.4 DKE-1711-X- (VOLTAGE) 12DC

3 4.4 DKE-1713-X- (VOLTAGE)

4 4.4 DKE-1714-X- (VOLTAGE)
8 4.4 DKE-1718-X- (VOLTAGE) 24DC

Sol 0-2 3.8 DKE-1630/2-X- (VOLTAGE)

110 RAC
Sol 1-2 3.8 DKE-1631/2-X- (VOLTAGE)

Sol 1-2A 3.8 DKE-1631/2-A-X- (VOLTAGE)

220 RAC
Sol 0 3.8 DKE-1610-X- (VOLTAGE)
Sol 1 3.8 DKE-1611-X- (VOLTAGE)
Sol 3 3.8 DKE-1613-X- (VOLTAGE)
Sol 4 3.8 DKE-1614-X- (VOLTAGE)

SPARE PARTS
BOLTS COILS DIN PLUGS
PART NO PART NO VOLT DESCRIPTION PART NO
M6X40 SHCS (STD) SP-CAE-12DC 12VDC DIN PLUG - BLACK 18209N
M6X50 SHCS SP-CAE-24DC 24VDC DIN PLUG – GREY 18209G
M6X70 SHCS SP-CAE-110AC 110VAC 12V or 24VDC LED 18209-10-50V
M6X80 SHCS SP-CAE-240AC 240VAC 12V or 24V LED & Supp 18209-10-50V-S
M6X90 SHCS 110V LED 18209-110V
M6X140 SHCS 240V LED 18209-240V
M6X150 SHCS RECTIFIER 110V 18209-110RAC
RECTIFIER 240V 18209-240RAC

INDUSTRIALVALVES 3.11
ATOSCetop7(NG16)SolenoidValves

CETOP 7 (NG16)
INDUSTRIAL VALVES

Includes Pilot Valve

OTHER OPTIONS AVAILABLE
SPO K VOLT-
SYMBOL TRANSITION PART NUMBER
OL g AGE
1 10 DP-2711-X- (VOLTAGE) 12DC

24DC
3 10 DP-2713-X- (VOLTAGE)
110AC
4 10 DP-2714-X- (VOLTAGE) 240AC

PILOT INSERT TO SUIT TYPE 4 SPOOL SP-/RDP-2-30

SPARE PARTS
BOLTS COILS DIN PLUGS
PART NO PART NO VOLT DESCRIPTION PART NO
M5X50 SHCS SP-COU-12DC 12VDC DIN PLUG - BLACK 18209N

M5X70 SHCS SP-COU-24DC 24VDC DIN PLUG – GREY 18209G

M5X80 SHCS SP-COI-110AC 110VAC 12V or 24VDC LED 18209-10-50V

M5X90 SHCS SP-COI-240AC 240VAC 12V or 24V LED & Supp 18209-10-50V-S

M6X40 SHCS SP-COU-48DC 48VDC 110V LED 18209-110V

M10X50 SHCS 240V LED 18209-240V

RECTIFIER 110V 18209-110RAC

RECTIFIER 240V 18209-240RAC

INDUSTRIALVALVES 3.12
STANDARDPROPORTIONAL VALVES
( NO FEED BACK )

PRESSURE RELIEF
SIZE MAX PRESS MAX AMP KG PART NUMBER
BAR FLOW LPM REQ
NG6 315 4 1,2 or 4 1.8 RZMO-A-010/315
NG6 315 40 1,2 or 4 2.8 RZMO-A-030/315

PRESSURE REDUCING
SIZE MAX PRESS MAX AMP KG PART NUMBER
BAR FLOW LPM REQ
NG6 315 12 1,2 or 4 1.8 RZGO-A-010/210
NG6 315 40 1,2 or 4 2.7 RZGO-A-033/210

FLOW CONTROL
MAX
MAX PRESS FLOW AMP KG PART NUMBER
SIZE BAR @DP=30BA REQ
R
NG6 350 50 LPM 1,2 or 4 1.9 DHZO-A-051-L5
NG10 315 105 LPM 1,2 or 4 3.8 DKZOR-A-151-L5

DIRECTIONAL VALVE
MAX
MAX FLOW AMP
SIZE KG PART NUMBER
PRESS BAR @DP=30BA REQ
R
NG6 350 50 LPM 1,3 or 5 2.6 DHZ0-A-071-L5
NG6 350 50 LPM 1,3 or 5 2.6 DHZO-A-073-L5
NG10 315 105 LPM 1,3 or 5 4.5 DKZOR-A-171-L5
NG10 315 105 LPM 1,3 or 5 4.5 DKZOR-A-173-L5

AMP CARDS
AMP TYPE PART NUMBER
TO SUIT VALVES
SINGLE OR DOUBLE 1 DIN PLUG E-MI-AC-01F
SOLENOIDS

SINGLE SOLENOID 2 FAST PLUG E-BM-AC-01F

IN
DOUBLE SOLENOID 3 FAST PLUG E-BM-AC-05F
IN
CONNECTOR FOR FAST PLUG IN VERSION E-K-11B

SINGLE SOLENOID 4 EURO CARD E-ME-AC-01F

DOUBLE SOLENOID 5 EURO CARD E-ME-AC-05F

INDUSTRIALVALVES 3.13
CETOPMODULARVALVES

ModularReliefValves

PART NUMBER DESCRIPTION P/ADJ RANGE MAX FLOW Bolts + Kg

CETOP 3
RV-02M-P-1-B P PORT TO T 7-70 BAR 35 LPM 40mm 1.2
P Port to T RV-02M-P-2-B P PORT TO T 35 - 140 BAR 35 LPM 40mm 1.2
RV-02M-P-3-B P PORT TO T 70 - 210 BAR 35 LPM 40mm 1.2

RV-02M-A-3-B A PORT TO T 70 - 210 BAR 35 LPM 40mm 1.2

A Port to T
RV-02M-B-3-B B PORT TO T 70 - 210 BAR 35 LPM 40mm 1.2

CETOP 5
RV-03M-P-3-B P PORT TO T 70 - 210 BAR 70 LPM 55mm 2.7
B Port to T

ModularReducingValves

PART NUMBER DESCRIPTION P/ADJ RANGE MAX FLOW Bolts + Kg

CETOP 3
BRV-02M-P-1-B Pilot from P PORT 7-70 BAR 35 LPM 40mm 1.2
Pilot from P Port
BRV-02M-P-2-B Pilot from P PORT 35 - 140 BAR 35 LPM 40mm 1.2
BRV-02M-A-2-B Pilot from A PORT 35 - 140 BAR 35 LPM 40mm 1.2
BRV-02M-B-2-B Pilot from B PORT 35 - 140 BAR 35 LPM 40mm 1.3

Pilot from A Port

CETOP 5
BRV-03M-P-3-B Pilot from P PORT 70 - 210 BAR 50 LPM 55mm 2.8

Pilot from B Port Other Pressure Ranges Available on Request

INDUSTRIALVALVES 3.14
CETOPMODULARVALVES

ModularCheckValves
PART NUMBER DESCRIPTION CRACK PRESS MAX FLOW Bolts + Kg
CETOP 3
CV-02M-P-05 P PORT 3.5 BAR 35 LPM 40mm 1.1
CV-02M-T-05 T PORT 3.5 BAR 35 LPM 40mm 1.1

CETOP 5
CV-03M-P-05 P PORT 3.5 BAR 70 LPM 55mm 2.8
CV-03M-T-05 T PORT 3.5 BAR 70 LPM 55mm 2.8

ModularPilotOperatedCheckValves
PART NUMBER DESCRIPTION P/ADJ RANGE MAX FLOW Bolts + Kg
CETOP 3
PCV-02M-A-05 Check on A 3.5 35 LPM 40mm 1.1
PCV-02M-B-05 Check on B 3.5 35 LPM 40mm 1.1
Single Lock Valve
PCV-02M-W-05 Check on A & B 3.5 35 LPM 40mm 1.1

CETOP 5
PCV-03M-W-05 Check on A & B 3.5 70 LPM 55mm 2.8
Dual Lock Valve

ModularFlowControlValves
PART NUMBER DESCRIPTION MAX FLOW Bolts + Kg

Meter Into Actuator

CETOP 3
TCV-02M-W-I Dual Flow Control ( In to Actuator) 35 LPM 40mm 1.3
TCV-02M-W-O Dual Flow Control ( Out of Actuator) 35 LPM 40mm 1.3
TV-02M-P Flow Control on P 35 LPM 40mm 1.2
Meter Into Actuator
CETOP 5
TCV-03M-W-I Flow Control ( In to Actuator) 70 LPM 55mm 2.8
TCV-03M-W-O Flow Control ( Out of Actuator) 70 LPM 55mm 2.8

Flow Control on P

INDUSTRIALVALVES 3.15
CETOPMODULARVALVES

ModularOvercentreValves(Counterbalance)

PART NUMBER DESCRIPTION P/ADJ RANGE RATIO MAX FLOW Bolts +

CETOP 3
OVCSEFC301 Single 5 - 200 Bar 4.25:1 35 LPM 40mm
OVCSEFC302 Single 40 - 350 Bar 4.25:1 35 LPM 40mm
OVCDEFC301 Dual 5 - 200 Bar 4.25:1 35 LPM 40mm
OVCDEFC302 Dual 40 - 350 Bar 4.25:1 35 LPM 40mm

CETOP 5
OVCSEFC502 Single 40-350 Bar 4.25:1 80 LPM 70mm
OVCDEFC502 Dual 40-350 Bar 4.25:1 80 LPM 70mm

INDUSTRIALVALVES 3.16
CETOPMODULARVALVES

ATOSModularValves
CETOP 3 (NG6)

SYMBOL DESCRIPTION RANGE PART NUMBER BOLTS

RELIEF VALVE 3-100 BAR HMP-011/100
10-210 BAR HMP-011/210 40
P PORT TO T 15-350 BAR HMP-011/350
RELIEF VALVE 3-100 BAR HMP-012/100
10-210 BAR HMP-012/210 40
A, B PORTS to T 15-350 BAR HMP-012/350
RELIEF VALVE 3-100 BAR HMP-013/100
10-210 BAR HMP-013/210 40
A PORT to T 15-350 BAR HMP-013/350
RELIEF VALVE 3-100 BAR HMP-014/100
10-210 BAR HMP-014/210 40
B PORT to T 15-350 BAR HMP-014/350
CROSSLINE RELIEF 3-100 BAR HMP-015/100
VALVE 10-210 BAR HMP-015/210 40
In A & B 15-350 BAR HMP-015/350
3-32 BAR HG-031/32
PRESSURE REDUCER 2-50 BAR HG-031/50 40
PILOT ON P PORT 20-100 BAR HG-031/100
50-210 BAR HG-031/210
3-32 BAR HG-033/32
PRESSURE REDUCER 2-50 BAR HG-033/50 40
PILOT ON A PORT 20-100 BAR HG-033/100
50-210 BAR HG-033/210
3-32 BAR HG-034/32
PRESSURE REDUCER 2-50 BAR HG-034/50 40
PILOT ON B PORT 20-100 BAR HG-034/100
50-210 BAR HG-034/210
ADJUSTABLE HC-011/30
PRESSURE COMPENSATOR Dp 5 – 35 BAR 40

FLOW CONTROL METER OUT 40

HQ-012
OUT OF ACTUATOR

FLOW CONTROL METER IN 40

HQ-022
INTO ACTUATOR

DIRECT
CHECK ON P PORT OPERATED HR-011 40

PILOT
CHECK ON A & B PORTS OPERATED HR-012 40

PILOT
CHECK ON A PORT OPERATED HR-013 40

DIRECT
CHECK ON T PORT OPERATED HR-016 40

SINGLE 5-200 BAR OVCSEFC3A01

40
COUNTERBALANCE 40-350 BAR OVCSEFC3A02
CBF

DUAL 5-200 BAR OVCDEFC301

40
COUNTERBALANCE 40-350 BAR OVCDEFC302
CBF

INDUSTRIALVALVES 3.17
CETOPMODULARVALVES

ATOSModularValves
CETOP 5 (NG10)

SYMBOL DESCRIPTION RANGE PART NUMBER BOLTS

RELIEF VALVE 3-100 BAR KM-011/100
10-210 BAR KM-011/210 50
P PORT TO T 15-350 BAR KM-011/350
RELIEF VALVE 3-100 BAR KM-012/100
10-210 BAR KM-012/210 50
A, B PORTS to T 15-350 BAR KM-012/350
RELIEF VALVE 3-100 BAR KM-013/100
10-210 BAR KM-013/210 50
A PORT to T 15-350 BAR KM-013/350
RELIEF VALVE 3-100 BAR KM-014/100
10-210 BAR KM-014/210 50
B PORT to T 15-350 BAR KM-014/350
CROSSLINE RELIEF 3-100 BAR KM-015/100
VALVE 10-210 BAR KM-015/210 50
In A & B 15-350 BAR KM-015/350

PRESSURE REDUCER 7-100 BAR KG-031/100

50
PILOT ON P PORT 8-210 BAR KG-031/210

PRESSURE REDUCER 7-100 BAR KG-033/100 50

PILOT ON A PORT 8-210 BAR KG-033/210

PRESSURE REDUCER 7-100 BAR KG-034/100

50
PILOT ON B PORT 8-210 BAR KG-034/210

ADJUSTABLE KC-011/30
PRESSURE COMPENSATOR Dp 5 – 35 BAR 50

FLOW CONTROL METER OUT 50

KQ-012
OUT OF ACTUATOR

FLOW CONTROL METER IN 50

KQ-022
INTO ACTUATOR

DIRECT OP-
CHECK ON P PORT ERATED KR-011 50

PILOT OPER-
CHECK ON A & B PORTS ATED KR-012 50

PILOT OPER-
CHECK ON A PORT ATED KR-013 50

DIRECT OP-
CHECK ON T PORT ERATED KR-016 50

5-200 BAR OVCSEFC501

SINGLE OVCSEFC502 50
40-350 BAR
COUNTERBALANCE
CBF
5-200 BAR OVCDEFC501
DUAL 50
40-350 BAR OVCDEFC502
COUNTERBALANCE
CBF

INDUSTRIALVALVES 3.18
STEEL
and
ALLOY

MANIFOLDS &
SUBPLATES
Page

Subplates Cetop 3 Alloy & Steel 4.01

Manifolds Cetop 3 Alloy & Steel 4.02
Manifolds Cetop 3 SERIES Alloy 4.03
Subplates Cetop 5 Alloy & Steel 4.04
Manifolds Cetop 5 Alloy & Steel 4.05
Manifolds Cetop 5 SERIES Alloy 4.06
Blanking Plates Cetop 3 and 5 4.06
Cetop 7 Subplates & Manifolds 4.07
CETOPMANIFOLDS&SUBPLATES

Part Number Material Ports Description

BEC3VLP4002
THSPC3SA ALLOY 3/8” BSPP Side Ports A,B,P&T
THSPC3BA ALLOY 3/8” BSPP Rear Ports A,B,P&T
THSPC3SS STEEL 3/8” BSPP Side Ports A,B,P&T Steel
THSPC3BS THSPC3SA
STEEL 3/8” BSPP Rear Ports A,B,P&T Steel
BEC3VLP4002 THSPC3SS
ALLOY 3/8” BSPP Rear P&T, Side A&B with Relief
Side Ported

THSPC3BA
THSPC3BS
Bottom Ported

Tank Manifold Relief or Unloading Valve

Part Number Material Ports Description

THM3RBAC ALLOY 1/2” BSPP Tank Manifold with C10-2 Cavity
P & T Ports
With C10-2 Cavity

THM3RBAC

CETOPMANIFOLDS 4.1
CETOPMANIFOLDS&SUBPLATES

CETOP3Manifolds ALLOY

Parallel With Plugged Relief Cavity

Ports
Part Number Description L Dim
P&T A&B
THM3RBAC 1/2” BSPP NONE P&T Block only 58
THMC3P1AC 1/2” BSPP 3/8” BSPP Single Station 90
THMC3P2AC 1/2” BSPP 3/8” BSPP 2 Station 137
THMC3P3AC 1/2” BSPP 3/8” BSPP 3 Station 192
THMC3P4AC 1/2” BSPP 3/8” BSPP 4 Station 247
THMC3P5AC 1/2” BSPP 3/8” BSPP 5 Station 302
THMC3P6AC 1/2” BSPP 3/8” BSPP 6 Station 357
LPSRV2-10 Pilot Operated Relief Valve

CETOP3Manifolds STEEL

Parallel With Plugged Relief Cavity

Ports L Dim
Part Number Description
P&T A&B mm
THMC3P1SC 1/2” BSPP 3/8” BSPP Single Station 90
THMC3P2SC 1/2” BSPP 3/8” BSPP 2 Station 137
THMC3P3SC 1/2” BSPP 3/8” BSPP 3 Station 192
THMC3P4SC 1/2” BSPP 3/8” BSPP 4 Station 247
THMC3P5SC 1/2” BSPP 3/8” BSPP 5 Station 302
THMC3P6SC 1/2” BSPP 3/8” BSPP 6 Station 357
LPSRV2-10 Pilot Operated Relief Valve

CETOPMANIFOLDS 4.2
CETOPMANIFOLDS&SUBPLATES

CETOPMANIFOLDS 4.3
CETOPMANIFOLDS&SUBPLATES

SERIES

CETOP3Manifolds ALLOY
Series With Plugged Relief Cavity
Ports L Dim
Part Number Description
P&T A&B mm
THMC3S2AC 1/2” BSPP 3/8” BSPP 2 Station 137
THMC3S3AC 1/2” BSPP 3/8” BSPP 3 Station 192
THMC3S4AC 1/2” BSPP 3/8” BSPP 4 Station 247
THMC3S5AC 1/2” BSPP 3/8” BSPP 5 Station 302
THMC3S6AC 1/2” BSPP 3/8” BSPP 6 Station 357
LPSRV2-10 Pilot Operated Relief Valve

CETOPMANIFOLDS 4.4
CETOPMANIFOLDS&SUBPLATES

CETOP5SUBPLATES

Part Number Material Ports Description

THSPC5SA ALLOY 1/2” BSPP Side Ports A,B,P&T
THSPC5BA ALLOY 1/2” BSPP Rear Ports A,B,P&T
THSPC5SS STEEL 1/2” BSPP Side Ports A,B,P&T Steel
THSPC5BS STEEL 1/2” BSPP Rear Ports A,B,P&T Steel
BEC5VLP801202 ALLOY 1/2” BSPP Rear P&T, Side A&B with Relief

Tank Manifold Relief or Unloading Valve

Part Number Material Ports Description

THM5RBAC ALLOY 3/4” BSPP Tank Manifold with C10-2 Cavity
P & T Ports
With C10-2 Cavity

THM5RBAC

CETOP MANIFOLDS 4.04

CETOPMANIFOLDS&SUBPLATES

CETOP5Manifolds ALLOY

Parallel With Plugged Relief Cavity

Ports L Dim
Part Number Description
P&T A&B mm
THMC5P1AC 3/4” BSPP 1/2” BSPP Single Station 108
THMC5P2AC 3/4” BSPP 1/2” BSPP 2 Station 191
THMC5P3AC 3/4” BSPP 1/2” BSPP 3 Station 273
THMC5P4AC 3/4” BSPP 1/2” BSPP 4 Station 355
THMC5P5AC 3/4” BSPP 1/2” BSPP 5 Station 437
THMC5P6AC 3/4” BSPP 1/2” BSPP 6 Station 519
LPSRV2-10 Pilot Operated Relief Valve

CETOP5Manifolds STEEL

Parallel With Plugged Relief Cavity

Ports L Dim
Part Number Description
P&T A&B mm
THMC5P1SC 3/4” BSPP 1/2” BSPP Single Station 108
THMC5P2SC 3/4” BSPP 1/2” BSPP 2 Station 191
THMC5P3SC 3/4” BSPP 1/2” BSPP 3 Station 273
THMC5P4SC 3/4” BSPP 1/2” BSPP 4 Station 355
THMC5P5SC 3/4” BSPP 1/2” BSPP 5 Station 437
THMC5P6SC 3/4” BSPP 1/2” BSPP 6 Station 519
LPSRV2-10 Pilot Operated Relief Valve

CETOPMANIFOLDS 4.5
CETOPMANIFOLDS&SUBPLATES

All Dimensions and specifications are for reference only. For critical information please contact Timalco.

CETOPMANIFOLDS 4.6
CETOPMANIFOLDS&SUBPLATES

SERIES

CETOP5Manifolds ALLOY

Series With Plugged Relief Cavity

Ports L Dim
Part Number Description
P&T A&B mm
THMC5S2AC 3/4” BSPP 1/2” BSPP 2 Station 191
THMC5S3AC 3/4” BSPP 1/2” BSPP 3 Station 273
THMC5S4AC 3/4” BSPP 1/2” BSPP 4 Station 355
LPSRV2-10 Pilot Operated Relief Valve

BLANKINGPLATES

Cetop3and5

Part Number Description

THBPC3S Cetop 3 Blanking Plate all ports blocked

THBPC5S Cetop 5 Blanking Plate all ports blocked

CETOPMANIFOLDS 4.7
CETOPMANIFOLDS&SUBPLATES

CETOP7Manifolds
STEEL

Ports (BSPP) A Dim

Part Number Description
PA&B T X Y mm
THMC7P1SC 3/4” 1” 1/4” 3/8” Manifold 1 Station 101.6
THMC7P2SC 3/4” 1” 1/4” 3/8” Manifold 2 Stations 203.2
THMC7P3SC 3/4” 1” 1/4” 3/8” Manifold 3 Stations 304.8
LPSRV2-10 Relief Valve C10-2 Cav

CETOP7Subplates
STEEL
Ports (BSPP)
Part Number Description
P, T,A & B X&Y
THSPC7SS 1” BSPP 1/4” BSPP Side Ports
THSPC7BS 1” BSPP 1/4” BSPP Bottom Ports

THSPC7SS
Side Ported THSPC7BS
Bottom Ported

CETOPMANIFOLDS 4.07
TIMA
HYDRAULICS

MOBILE VALVES

Page

Manual DCV Monoblock DCV20 5.01

Manual DCV Monoblock DCV40 5.02
Manual DCV Sectional DCV60 5.03
Manual DCV Sectional DCV100 5.04
Manual DCV Sectional DCV100 Sections 5.05
Manual DCV Sectional DCV140 5.06
Manual DCV Sectional DCV140 Sections 5.07
Manual DCV Sectional DCV200 5.08
Manual DCV Sectional DCV200 Sections 5.09
MANUALDIRECTIONALVALVES

DCV20
Manually Operated Directional Control Valve
Double Acting – Spring Centred
35LPM
350 BAR

Common Load Hold Check

Part Number Max Flow Max Pressure Ports

DCV20/1-E7(140)-S1C1A1-U1-G06
DCV20/2-E7(140)-S1C1A1-U1-G06
DCV20/3-E7(140)-S1C1A1-U1-G06
35 LPM 350 BAR 3/8” BSPP
DCV20/4-E7(140)-S1C1A1-U1-G06
DCV20/5-E7(140)-S1C1A1-U1-G06
DCV20/6-E7(140)-S1C1A1-U1-G06

OPTIONS
Part Number Description
DCV20-A1 3 Pos Spring Kit
DCV20-A2 Detent Kit 3 Position
DCV20-A3 Detent Kit 2 Position - Detent in A
DCV20-A4 Detent Kit 2 Position - Detent in B
DCV20-A14 Pneumatic Control Kit
DCV20-A171 Electric Pneumatic On/Off Kit 12VDC
DCV20-A172 Electric Pneumatic On/Off Kit 24VDC
DCV20-C1 Lever Box
DCV20/40-U2 HPCO Plug
DCV20-S1 D/Acting Spool
DCV20-S4 Motor Spool
DCV20-S8 Single Acting

MOBILEVALVES 5.1
MANUALDIRECTIONALVALVES

DCV40
Manually Operated Directional Control Valve
Double Acting – Spring Centred
60LPM
350 BAR

Common Load Hold Check

Part Number Max Flow Max Pressure Ports

DCV40/1-E7(140)-S1C1A1-U1-G08
DCV40/2-E7(140)-S1C1A1-U1-G08
DCV40/3-E7(140)-S1C1A1-U1-G08 60 LPM 350 BAR 1/2” BSPP
DCV40/4-E7(140)-S1C1A1-U1-G08
DCV40/5-E7(140)-S1C1A1-U1-G08
DCV40/6-E7(140)-S1C1A1-U1-G08

Options
Part Number Description
DCV40/60-A1 3 Pos Spring Kit
DCV40/60-A2 Detent Kit 3 Position
DCV40/60-A3 Detent Kit 2 Position - Detent in A
DCV40/60-A4 Detent Kit 2 Position - Detent in B
DCV40/60-A8 Spring Kit 2 Pos A&O
DCV40/60-A9 Spring Kit 2 Pos B&O
DCV40/60-A10 Detent Kit 2 Position Spring Centred Detent in B
DCV40/60-A11 Detent Kit 2 Position Spring Centred Detent in A
DCV40/60-A14 Pneumatic Control Kit
DCV40/60-A171 Electric Pneumatic ON/OFF 12VDC
DCV40/60-A172 Electric Pneumatic ON/OFF 24VDC
DCV40/60-C1 Lever Box
DCV20/40-U2 HPCO Plug
DCV40-S1 Double Acting Spool
DCV40-S4 Motor Spool
DCV40-S8 Single Acting Spool in A
DCV40-S9 Single Acting Spool in B

MOBILEVALVES 5.2
MANUALDIRECTIONALVALVES

DCV60
Sectional
1-12 Sections
Manually Operated Directional Control Valve
Double Acting – Spring Centred
60LPM
315 BAR

Load Hold Checks

Part Number Max Flow Max Pressure Ports

DCV60/1-E2(140)-S1C1A1-U1-G08
DCV60/2-E2(140)-S1C1A1-U1-G08
DCV60/3-E2(140)-S1C1A1-U1-G08 60 LPM 315 BAR 1/2” BSPP
DCV60/4-E2(140)-S1C1A1-U1-G08
DCV60/5-E2(140)-S1C1A1-U1-G08
DCV60/6-E2(140)-S1C1A1-U1-G08

Options

Part Number Description Part Number Description

DCV60-S*-Section Add per extra Section DCV40/60-C1 Lever Box

DCV40/60-A1 Spring Kit DCV60-E2(140) Inlet with Relief
DCV40/60-A2 Detent Kit 3 Position DCV60-RV Std Relief Valve
DCV40/60-A3 Detent Kit 2 Position - Det in A DCV60-S1 Double Acting Spool
DCV40/60-A4 Detent Kit 2 Position - Det in B DCV60-S4 Motor Spool
DCV40/60-A8 Spring Kit 2 Pos A&O DCV60-S7 Single Act Spool in A
DCV40/60-A9 Spring Kit 2 Pos B&O DCV60-S8 Single Act Spool in B
DCV40/60-A10 Detent Kit 2 Pos S/Cent Detent in B
DCV40/60-A11 Detent Kit 2 Pos S/Cent Detent in A DCV60-V*1-B 140 Bar Port Relief
DCV40/60-A14 Pneumatic Kit DCV60-V*1-C 200 Bar Port Relief
DCV40/60-A171 Electric Pneumatic ON/OFF 12VDC DCV60-U2 HPCO Plug
DCV40/60-A172 Electric Pneumatic ON/OFF 24VDC DCV60-U2-G08 Outlet Section

MOBILEVALVES 5.3
MANUALDIRECTIONALVALVES

DCV100
Sectional
1-12 Sections
Manually Operated Directional Control Valve
Double Acting – Spring Centred
100LPM
315 BAR

Dim Dim
Part Number Max Flow Max Pressure Ports
A B
DCV100/1-E2(140)-S1C1A1-U1-G12 158 88
DCV100/2-E2(140)-S1C1A1-U1-G12 200 130
DCV100/3-E2(140)-S1C1A1-U1-G12 242 172 3/4”
100 LPM 315 BAR
BSPP
DCV100/4-E2(140)-S1C1A1-U1-G12 284 214
DCV100/5-E2(140)-S1C1A1-U1-G12 326 256
DCV100/6-E2(140)-S1C1A1-U1-G12 370 298

Load Hold Checks

Part Number Description

DCV100/140-A1 Spring Kit
DCV100/140-A2 Detent Kit 3 Position
DCV100/140-A3 Detent Kit 2 Position - Detent in A
DCV100/140-A4 Detent Kit 2 Position - Detent in B
DCV100/140-A14 Pneumatic Kit
DCV100/140-A17 Electric Pneumatic ON/OFF
DCV100/140-C1 Handle End Cover
DCV100-U2 HPCO Plug
DCV100-S1 D/Acting Spool
DCV100-S4 Motor Spool
DCV100-S7 Single Acting Spool
DCV100-S8 Single Acting Spool
DCV100/140-Va1/Vb1-B A & B Port Relief Valves (80-160 Bar)
DCV100/140-Va1/Vb1-C A & B Port Relief Valves (140-220 Bar)
DCV100/140-Va3/Vb3-B Combined Anti Cav + Port Relief Valves (80-160 Bar)
DCV100/140-Va3/Vb3-C Combined Anti Cav + Port Relief Valves (140-220 Bar)

MOBILEVALVES 5.4
MANUALDIRECTIONALVALVES

DCV100
Sectional
1-12 Sections
Manually Operated Directional
Control Valve

Inlet Section
Part Number Description
DCV100-E2(200)-G12 Inlet Section with Relief

Working Sections
Part Number Description
DCV100-S1C1A1-G12 Double Acting Valve Section Only
DCV100-S1C1A2-G12 Double Acting Valve Section with 3 Pos Detent
DCV100-S1C1A14-G12 Double Acting Valve Section with Pneumatic Controls
DCV100-S4C1A1-G12 D/Act Motor Spool Valve Section
DCV100-S4C1A2-G12 D/Act Motor Spool Valve Section with 3 Pos Detent
DCV100-S4C1A14-G12 D/Act Motor Spool Valve Section with Pneumatic Controls
DCV100-S7C1A1-G12 Single Acting Valve Section in A
DCV100-S7C1A14-G12 Single Acting Valve Section in A with Pneumatic Controls
DCV100-S8C1A1-G12 Single Acting Valve Section in B
DCV100-S8C1A14-G12 Single Acting Valve Section in B with Pneumatic Controls

Outlet Section
Part Number Description
DCV100-U1-G12 Outlet Section Open Centre
DCV100-U2-G12 Outlet Section Closed Centre & Power Beyond

Bolt Kits
Part Number Description
DCV100-BK1 4 Bolts per Kit (10X158) to suit1 Section
DCV100-BK2 4 Bolts per Kit (10X200) to suit 2 Section
DCV100-BK3 4 Bolts per Kit (10X242) to suit 3 Section
DCV100-BK4 4 Bolts per Kit (10X284) to suit 4 Section
DCV100-BK5 4 Bolts per Kit (10X326) to suit 5 Section
DCV100-BK6 4 Bolts per Kit (10X370) to suit 6 Section

MOBILEVALVES 5.5
MANUALDIRECTIONALVALVES

DCV140
Sectional
1-12 Sections
Manually Operated Directional Control Valve
Double Acting – Spring Centred
140LPM
315 BAR

Part Number Max Flow Max Pressure Ports

DCV140/1-E2(140)-S1C1A1-U1-G16
DCV140/2-E2(140)-S1C1A1-U1-G16
P and T A and B
DCV140/3-E2(140)-S1C1A1-U1-G16 140 LPM 315 BAR
DCV140/4-E2(140)-S1C1A1-U1-G16 1” BSPP 3/4” BSPP
DCV140/5-E2(140)-S1C1A1-U1-G16
DCV140/6-E2(140)-S1C1A1-U1-G16

Part Number Description

DCV100/140-A1 Spring Kit
DCV100/140-A2 Detent Kit 3 Position
DCV100/140-A3 Detent Kit 2 Position - Detent in A
DCV100/140-A4 Detent Kit 2 Position - Detent in B
DCV100/140-A14 Pneumatic Kit
DCV100/140-A17 Electric Pneumatic ON/OFF
DCV100/140-C1 Handle End Cover
DCV140-U2 HPCO Plug
DCV140-S1 D/Acting Spool
DCV140-S4 Motor Spool
DCV140-S7 Single Acting Spool
DCV140-S8 Single Acting Spool
DCV100/140-Va1/Vb1-B A & B Port Relief Valves (80-160 Bar)
DCV100/140-Va1/Vb1-C A & B Port Relief Valves (140-220 Bar)
DCV100/140-Va3/Vb3-B Combined Anti Cav + Port Relief Valves (80-160 Bar)
DCV100/140-Va3/Vb3-C Combined Anti Cav + Port Relief Valves (140-220 Bar)

MOBILEVALVES 5.6
MANUALDIRECTIONALVALVES

DCV140
Sectional
1-12 Sections
Manually Operated Directional
Control Valve

Inlet Section
Part Number Description
DCV140-E2(200)-G16 Inlet Section with Relief

Working Sections
Part Number Description
DCV140-S1C1A1-G16 Double Acting Valve Section Only
DCV140-S1C1A2-G16 Double Acting Valve Section with 3 Pos Detent
DCV140-S1C1A14-G16 Double Acting Valve Section with Pneumatic Controls
DCV140-S4C1A1-G16 D/Act Motor Spool Valve Section
DCV140-S4C1A2-G16 D/Act Motor Spool Valve Section with 3 Pos Detent
DCV140-S4C1A14-G16 D/Act Motor Spool Valve Section with Pneumatic Controls
DCV140-S7C1A1-G16 Single Acting Valve Section in A
DCV140-S7C1A14-G16 Single Acting Valve Section in A with Pneumatic Controls
DCV140-S8C1A1-G16 Single Acting Valve Section in B
DCV140-S8C1A14-G16 Single Acting Valve Section in B with Pneumatic Controls

Outlet Section
Part Number Description
DCV140-U1-G16 Outlet Section Open Centre
DCV140-U2-G16 Outlet Section Closed Centre & Power Beyond

Bolt Kits
Part Number Description
DCV140-BK1 4 Bolts per Kit (10X158) to suit 1 Section
DCV140-BK2 4 Bolts per Kit (10X200) to suit 2 Section
DCV140-BK3 4 Bolts per Kit (10X242) to suit 3 Section
DCV140-BK4 4 Bolts per Kit (10X284) to suit 4 Section
DCV140-BK5 4 Bolts per Kit (10X326) to suit 5 Section
DCV140-BK6 4 Bolts per Kit (10X370) to suit 6 Section

MOBILEVALVES 5.7
MANUALDIRECTIONALVALVES

DCV200
Sectional
1-12 Sections
Manually Operated Directional Control Valve
Double Acting – Spring Centred
200LPM
315 BAR

Part Number Max Flow Max Pressure Ports

DCV200/1-E2(140)-S1C1A1-U1-G16
DCV200/2-E2(140)-S1C1A1-U1-G16
DCV200/3-E2(140)-S1C1A1-U1-G16 200 LPM 315 BAR 1” BSPP
DCV200/4-E2(140)-S1C1A1-U1-G16
DCV200/5-E2(140)-S1C1A1-U1-G16
DCV200/6-E2(140)-S1C1A1-U1-G16

Part Number Description

DCV200-A1 Spring Kit
DCV200-A2 Detent Kit 3 Position
DCV200-A3 Detent Kit 2 Position - Detent in A
DCV200-A4 Detent Kit 2 Position - Detent in B
DCV200-A14 Pneumatic Kit
DCV200-A17 Electric Pneumatic ON/OFF
DCV200-C1 Handle End Cover
DCV200-U2 HPCO Plug
DCV200-S1 D/Acting Spool
DCV200-S4 Motor Spool
DCV200-S7 Single Acting Spool
DCV200-S8 Single Acting Spool
DCV200-Va1/Vb1-B A & B Port Relief Valves (80-160 Bar)
DCV200-Va1/Vb1-C A & B Port Relief Valves (140-220 Bar)

MOBILEVALVES 5.8
MANUALDIRECTIONALVALVES

DCV200
Sectional
1-12 Sections
Manually Operated Directional Control Valve
200LPM
315 BAR

Inlet Section
Part Number Description
DCV200-E2(200)-G16 Inlet Section with Relief

Working Sections
Part Number Description
DCV200-S1C1A1-G16 Double Acting Valve Section Only
DCV200-S1C1A2-G16 Double Acting Valve Section with 3 Pos Detent
DCV200-S1C1A14-G16 Double Acting Valve Section with Pneumatic Controls
DCV200-S4C1A1-G16 D/Act Motor Spool Valve Section
DCV200-S4C1A2-G16 D/Act Motor Spool Valve Section with 3 Pos Detent
DCV200-S4C1A14-G16 D/Act Motor Spool Valve Section with Pneumatic Controls
DCV200-S7C1A1-G16 Single Acting Valve Section in A
DCV200-S7C1A14-G16 Single Acting Valve Section in A with Pneumatic Controls
DCV200-S8C1A1-G16 Single Acting Valve Section in B
DCV200-S8C1A14-G16 Single Acting Valve Section in B with Pneumatic Controls

Outlet Section
Part Number Description
DCV200-U1-G16 Outlet Section Open Centre
DCV200-U2-G16 Outlet Section Closed Centre & Power Beyond

Bolt Kits
Part Number Description
DCV200-BK1 4 Bolts per Kit (12X190) to suit 1 Section
DCV200-BK2 4 Bolts per Kit (12X241) to suit 2 Section
DCV200-BK3 4 Bolts per Kit (12X292) to suit 3 Section
DCV000-BK4 4 Bolts per Kit (12X343) to suit 4 Section
DCV200-BK5 4 Bolts per Kit (12X394) to suit 5 Section
DCV200-BK6 4 Bolts per Kit (12X445) to suit 6 Section

MOBILEVALVES 5.9
HYDRAULICS

Cartridge Valves &

Bodies
Page

Normally Closed 2 Pos Cartridges 6.01

Normally Open 2 Pos Cartridges 6.02
3 and 4 Way, 2 and 3 Position Cartridges 6.03
Solenoid Coils and Din Plugs 6.04
Pressure Cartridges - Check Cartridges 6.05
Check and Flow control cartridges 6.06
Bodies 2 Port Aluminum and Steel Common Cavity 6.07
Bodies 3 Port Aluminum and Steel Common Cavity 6.08
Bodies 4 Port Aluminum and Steel Common Cavity 6.09
SUN TYPE CARTRIDGES 6.010
SUN TYPE BODIES Aluminum and Steel 6.011
Special Purpose Built 6.012
Quick Hitch 6.012
Normally Closed 2 Position Solenoid Operated
Cartridge Valves

Normally Closed - No Reverse Flow when Energised.

Flow Rate Pressure

Part Number Common Cavity Coil
(LPM) (Bar)

LSV-08-2NCP 18 210 08-2 3/4-16 2 Way LC2-08-C-*H

LSV2-08-2NCP 30 250 08-2 3/4-16 2 Way LC2-08--H

LSV6-08-2NCP 50 350 08-2 3/4-16 2 Way LC6-08-S-*H

LSV2-10-2NCP 60 250 10-2 7/8-14 2 Way LC2-10-C-*H

LSV2-12-2NCP 113 250 12-2 1-1/16-12 2 Way LC2-10-C-*H

LSV6-16-2NCP 150 350 16-2 1-5/16-12 2 Way LC6-08-S-*H

Normally Closed - With Reverse Flow when Energised.

Flow Rate Pressure

Part Number Common Cavity Coil
(LPM) (Bar)

LSV2-08-2NCRP 22 250 08-2 3/4-16 2 Way LC2-08--H

LSV6-08-2NCRP 50 350 08-2 3/4-16 2 Way LC6-08-S-*H

LSV2-10-2NCRP 56 250 10-2 7/8-14 2 Way LC2-10-C-*H

LSV6-10-2NCRP 70 350 10-2 7/8-14 2 Way LC6-08-S-*H

LSV2-12-2NCRP 113 250 12-2 1-1/16-12 2 Way LC2-10-C-*H

LSV6-16-2NCRP 150 350 16-2 1-5/16-12 2 Way LC6-08-S-*H

Normally Closed - 2 Way, 2 Position, Spool Type, Bi-Directional

Flow Rate Pressure

Part Number Common Cavity Coil
(LPM) (Bar)

LSV2-08-2NCS 16 207 08-2 3/4-16 2 Way LC2-08-C-*H

LSV2-10-2NCS 36 207 10-2 7/8-14 2 Way LC2-08-C-*H

Normally Closed - 2 Way, 2 Position, Bi-Directional

Flow Rate Pressure

Part Number Common Cavity Coil
(LPM) (Bar)

LSV6-08-2NCSP 40 350 08-2 3/4-16 2 Way LC6-08-S-*H

LSV6-10-2NCSP 70 350 10-2 7/8-14 2 Way LC6-08-S-*H

LSV6-16-2NCSP 150 350 16-2 1-5/16-12 2 Way LC6-08-S-*H

Coils, Din Plugs and Bodies supplied separately

Refer Data sheets for Flow Rates and Pressure Drops

CartridgeValves&Bodies 6.1
Normally Open 2 Position Solenoid Operated
Cartridge Valves

Normally Open—with reverse flow when de-energized

Flow Rate Pressure Coil

Part Number Common Cavity
(LPM) (Bar) to suit

LSV2-08-2NORP 38 250 08-2 3/4-16 2 Way LC2-08--H

LSV2-10-2NORP 68 250 10-2 7/8-14 2 Way LC2-10-C-*H

LSV2-12-2NORP 113 250 12-2 1-1/16-12 2 Way LC2-10-C-*H

Normally Open - Restricted Reverse Flow when energized.

Flow Rate Pressure Coil

Part Number Common Cavity
(LPM) (Bar) to suit

LSV2-08-2NOP 38 250 08-2 3/4-16 2 Way LC2-08-C-*H

LSV2-10-2NOP 66 250 10-2 7/8-14 2 Way LC2-10-C-*H

LSV2-12-2NOP 113 250 12-2 1-1/16-12 2 Way LC2-10-C-*H

Normally Open - Restricted Reverse Flow when energized.

Flow Rate Pressure Coil

Part Number Common Cavity
(LPM) (Bar) to suit

LSV2-08-2NOS 11 207 08-2 3/4-16 2 Way LC2-08-C-*H

LSV2-10-2NOS 22 207 10-2 7/8-14 2 Way LC2-10-C-*H

Normally Open - Reverse Free Flow, Checked 1 & 2 when energized.

Flow Rate Pressure Coil

Part Number Common Cavity
(LPM) (Bar) to suit

LSV6-08-2NOSP 50 350 08-2 3/4-16 2 Way LC3-10-C-*H

LSV6-10-2NOSP 70 350 10-2 7/8-14 2 Way LC3-10-C-*H

LSV6-16-2NOSP 150 350 16-2 1-5/16-12 2 Way LC3-10-C-*H

Coils, Din Plugs and Bodies supplied separately

Refer Data sheets for Flow Rates and Pressure Drops

CartridgeValves&Bodies 6.2
3 & 4 Port, 2 & 3 Position
Solenoid Operated Cartridge Valves

3 Way 2 position

Flow Rate Pressure

Part Number Common Cavity Coil to suit
(LPM) (Bar)

LSV2-08-3 11 207 08-3 3/4-16 3 Way LC2-08--H

② LSV2-10-3 22 207 10-3 7/8-14 3 Way LC2-10-C-*H

②
LSV2-08-3A 11 207 08-3 3/4-16 3 Way LC2-08-*-*H

LSV2-08-3B 18 207 08-3 3/4-16 3 Way LC2-08--H

LSV2-10-3B 22 207 10-3 7/8-14 3 Way LC2-10-C-*H

LSV2-08-3C 11 207 08-3 3/4-16 3 Way LC2-08--H

LSV-08-3L 20 350 08-3 3/4-16 3 Way LC3-10-C-*H

LSV-10-3-L 25 250 10-3 7/8-14 3 Way LC3-10-C-*H

4 Way Valves
Flow rate Pressure
Part Number Common Cavity Coil to Suit
(LPM) (Bar)

LSV2-08-4-CO 11 207 08-4 3/4-16 4 Way LC2-08-*-H

LSV2-10-4-CO 22 207 10-4 7/8-14 4 Way LC2-10-*-H

LSV2-08-4-NC 11 207 08-4 3/4-16 4 Way LC2-08-*-H

LSV2-10-4-NO 22 207 10-4 7/8-14 4 Way LC2-10-*-H

LC2-08-*-H
LSV-08-34-T 11 207 08-4 3/4-16 4 Way
X2

LC2-08-*-H
LSV-08-34-M 11 207 08-4 3/4-16 4 Way
X2

LC2-08-*-H
LSV-08-34-C 11 207 08-4 3/4-16 4 Way
X2

LC2-08-*-H
LSV-08-34-O 11 207 08-4 3/4-16 4 Way
X2

6.3
Solenoid Operated Coils
& Din Plug Connectors

Coils
Dimensions Stem Dia
Part Number Coil Type Voltage
Width x Length approx
LC-08-S-1H Square 12VDC 30.4 x 38.8 13 mm
LC-08-S-2H Square 24VDC 30.4 x 38.8 13 mm
LC-08-S-4H Square 220VAC 30.4 x 38.8 13 mm
LC2-08-C-1H Cylindrical 12VDC 34.3 x 37 13 mm
LC2-08-C-2H Cylindrical 24VDC 34.3 x 37 13 mm
LC2-08-C-4H Cylindrical 220VAC 34.3 x 37 13 mm
LC2-10-C-1H Cylindrical 12VDC 44 x 51.3 16 mm
LC2-10-C-2H Cylindrical 24VDC 44 x 51.3 16 mm
LC2-10-C-4H Cylindrical 220VAC 44 x 51.3 16 mm
LC3-08-S-1H Square 12VDC 36 x 38.8 13 mm
LC3-08-S-2H Square 24VDC 36 x 38.8 13 mm
LC3-08-S-4H Square 220VAC 36 x 38.8 13 mm
LC3-10-C-1H Cylindrical 12VDC 37.7 x 50.5 16 mm
LC3-10-C-2H Cylindrical 24VDC 37.7 x 50.5 16 mm
LC3-10-C-4H Cylindrical 220VAC 37.7 x 50.5 16 mm
LC6-08-S-1H Square 12VDC 36 x 38.5 13 mm
LC6-08-S-2H Square 24VDC 36 x 38.5 13 mm
LC6-08-S-4H Square 220VAC 36 x 38.5 13 mm

DIN Plug
Connectors
PART NO DESCRIPTION

18209N DIN PLUG - BLACK

18209G DIN PLUG – GREY

18209-10-50V 12V or 24VDC LED

18209-10-50V-S 12V or 24V LED & Supp

18209-110V 110V
LED
18209-240V 240V
LED
18209-110RAC RECTIFIER 110V

18209-240RAC RECTIFIER 240V

6.4
Common Cavity Cartridge Valves

Relief Valve Cartridges

Adjust-
Max
Part Number Type ment Common Cavity
Flow rate
range

LADRV2-08-23 Direct Acting 17-159 Bar 08-2 3/4-16 2 Way 22 LPM

LADRV2-08-37 Direct Acting 17-260 Bar 08-2 3/4-16 2 Way 22 LPM

LADRV2-10-23 Direct Acting 17-161 Bar 10-2 7/8-14 2 Way 37 LPM

LADRV2-10-30 Direct Acting 20-210 Bar 10-2 7/8-14 2 Way 37 LPM

LNRV-08M-2-14 Direct Acting 30-100 Bar 08M-2 M20X1.5-7H 2 Way 30 LPM

LNRV-08M-2-30 Direct Acting 50-210 Bar 08M-2 M20X1.5-7H 2 Way 30 LPM

LNRV-08M-2-50 Direct Acting 100-350 Bar 08M-2 M20X1.5-7H 2 Way 30 LPM

LPSRV2-08-30 Pilot Operated 3.5-207 Bar 08-2 3/4-16 2 Way 37 LPM

LPSRV2-10-40 Pilot Operated 70-280 Bar 10-2 7/8-14 2 Way 120 LPM

LPSRV2-16-60 Pilot Operated 10-420 Bar 16-2 1-5/16-12 2 Way 400 LPM

Pressure Reducing/Relieving Cartridges

Adjustment Max
Part Number Type Common Cavity
Range Flow rate

LDPR-08-12 Direct Acting 21-82 Bar 08-3 3/4-16 3 Way 11 LPM

LDPR-10-15 Direct Acting 20-103 Bar 10-3 7/8-14 3 Way 30LPM

Reducing Cartridge Only

LPRPS-10-30 Pilot Operated 4-207 Bar 10-3 7/8-14 3 Way 38 LPM

LPPR2-10-30 Pilot Operated 28-207 Bar 10-3 7/8-14 3 Way 56 LPM

Check Valves—Poppet Type

Cracking
Part Number Pressure Common Cavity Flow rate
Pressure
LCV-08-P-0.7 .7 Bar 250 Bar 08-2 3/4-16 2 Way 20 LPM

LCV-10-P-0.7 .7 Bar 250 Bar 10-2 7/8-14 2 Way 38 LPM

LCV-12-P-1.7 1.7 Bar 250 Bar 12-2 1-1/16-12 2 Way 120 LPM

LCV-16-P-1.7 1.7 Bar 350 Bar 16-2 1-5/16-12 2 Way 220 LPM

6.5
Common Cavity Cartridge Valves

Check Valves—Pilot to Close

Cracking
Part Number Pressure Common Cavity Flow rate
Pressure

LPC2-10-N-2.1 2.1 Bar 250 Bar 10-3 7/8-14 3 Way 45 LPM

Check Valves—Pilot to Open

Cracking
Part Number Pressure Common Cavity Flow rate
Pressure

LPC-08-N-1.4 1.4 Bar 250 BAR 08-3 3/4-16 3 Way 25

LPOC1-10-3S-2.0 2 Bar 350 BAR 10-3S 7/8-14 3 Way 56

Needle Valve
Cartridges

Part Number Pressure Common Cavity Flow rate

LNV2-08 250 Bar 08-2 3/4-16 2 Way 16

LNV2-10 250 Bar 10-2 7/8-14 2 Way 30

LNV2-12 250 Bar 12-2 1-1/16-12 2 Way 100

Flow Control Cartridges with reverse free flow

Part Number Pressure Common Cavity Flow rate

LFC-08 250 Bar 08-2 3/4-16 2 Way 20

LFC-10 250 Bar 10-2 7/8-14 2 Way 40

Flow Control—Pressure Compensated

Part Number Pressure Common Cavity Reg Flow

LFRA-08 240 Bar 08-2 3/4-16 2 Way 1-20 LPM

LFRA-10 240 Bar 10-2 7/8-14 2 Way 3-26 LPM

6.6
Cartridge Valves

Bodies BSPP Ports

Aluminium and Steel Housings to suit Cartridge Valves
Common Cavities

2 Port Aluminium Bodies

Part Number Max Press Common Cavity Ports
LB08-2-A-2G 210 BAR 08-2 3/4-16 2 Way 1/4” BSPP
LB08-2-A-3G 210 BAR 08-2 3/4-16 2 Way 3/8” BSPP
LB10-2-A-3G 210 BAR 10-2 7/8-14 2 Way 3/8” BSPP
LB10-2-A-4G 210 BAR 10-2 7/8-14 2 Way 1/2” BSPP
LB12-2-A-4G 210 BAR 12-2 1-1/16-12 2 Way 1/2” BSPP
LB12-2-A-6G 210 BAR 12-2 1-1/16-12 2 Way 3/4” BSPP
LB12-2-A-8G 210 BAR 12-2 1-1/16-12 2 Way 1” BSPP

A B C D E F G H I
LB08-2-A-** 28.7 19.05 50.8 50.8 38.1 3.3 41.4 15.2 7.11
LB10-2-A-** 31.75 19.05 50.8 50.8 38.1 3.3 41.4 19.05 7.11
LB12-2-A-** 50.8 28.7 76.2 76.2 57.2 4.1 65 26.2 8.6

2 Port Steel Bodies

Part Number Max Press Cavity Ports
STEEL BODY LB08-2-S-2G 350 BAR 08-2 3/4-16 2 Way 1/4” BSPP

LB08-2-S-3G 350 BAR 08-2 3/4-16 2 Way 3/8” BSPP

LB10-2-S-3G 350 BAR 10-2 7/8-14 2 Way 3/8” BSPP

LB10-2-S-4G 350 BAR 10-2 7/8-14 2 Way 1/2” BSPP

LB12-2-S-6G 350 BAR 12-2 1-1/16-12 2 Way 3/4” BSPP

LB12-2-S-8G 350 BAR 12-2 1-1/16-12 2 Way 1” BSPP

LB16-2-S-6G 350 BAR 16-2 1-5/16-12 2 Way 3/4” BSPP

LB16-2-S-8G 350 BAR 16-2 1-5/16-12 2 Way 1” BSPP

A B C D E F G H I
LB08-2-S-** 31.75 22.9 57.15 57.15 38.1 5.08 41.4 15.49 7.14
LB10-2-S-** 35.05 22.86 57.15 57.15 38.1 5.08 41.4 19.08 7.14
LB12-2-S-** 50.8 33.7 82.6 88.9 57.2 8.9 65 26.9 8.6
LB16-2-S-** 50.8 33.8 82.6 88.9 57.2 8.9 65 25.4 8.6

6.7
Cartridge Valves

Bodies BSPP Ports

Aluminium and Steel Housings to suit Cartridge Valves
Common Cavities

6.8
Cartridge Valves

Bodies BSPP Ports

Aluminium and Steel Housings to suit Cartridge Valves
Common Cavities

3 Port Aluminium Bodies

Part Number Max Press Cavity Ports
LB08-3-A-3G 210 Bar 08-3 3/4-16 3 Way 3/8” BSPP
LB10-3-A-2G 210 Bar 10-3 7/8-14 3 Way 1/4” BSPP
LB10-3-A-3G 210 Bar 10-3 7/8-14 3 Way 3/8 BSPP

A B C D E F G H I J
LB08-3-A-** 28.7 31.75 63.5 66.5 53.8 15.2 6.35 50.8 29.7 7.11

LB10-3-A-** 31.75 31.75 63.5 66.5 53.8 18.8 6.35 50.8 34.5 7.11

3 Port Steel Bodies

Part Number Max Press Cavity Ports
LB08-3-S-2G 350 Bar 08-3 3/4-16 3 Way 1/4” BSPP
LB08-3-S-3G 350 Bar 08-3 3/4-16 3 Way 3/8” BSPP
LB10-3-S-2G 350 Bar 10-3 7/8-14 3 Way 1/4” BSPP
LB10-3-S-3G 350 Bar 10-3 7/8-14 3 Way 3/8 BSPP

F
I
A E
D

B
C

G H J

6.9
Cartridge Valves

Bodies BSPP Ports

Aluminium and Steel Housings to suit Cartridge Valves
Common Cavities
A B C D E F G H I J

LB08-3-S-** 31.75 32.5 65 69.8 53.8 15.5 7.11 50.8 29.7 7.14

LB10-3-S-** 35.1 33 65 69.8 53.8 19.05 7.11 50.8 34.5 7.14

6.10
Cartridge Valves

Bodies BSPP Ports

Aluminium and Steel Housings to suit Cartridge Valves
Common Cavities

4 Port Aluminium Bodies

Part Number Max Press Cavity Ports
LB08-4-A-2G 210 Bar 08-4 3/4-16 4 Way 1/4” BSPP
LB08-4-A-3G 210 Bar 08-4 3/4-16 4 Way 3/8” BSPP
LB10-4-A-2G 210 Bar 10-4 7/8-14 4 Way 1/4” BSPP
LB10-4-A-3G 210 Bar 10-4 7/8-14 4 Way 3/8 BSPP

A B C D E F G H I J K
LB08-4-A-** 28.7 31.75 63.5 82.5 72.1 29.7 6.35 50.8 15.2 43.9 7.11
LB10-4-A-** 31.75 31.75 63.5 82.5 72.1 34.5 6.35 50.8 18.8 50.5 7.11

4 Port Steel Bodies

Part Number Max Press Cavity Ports

LB08-4-S-2G 350 Bar 08-4 3/4-16 4 Way 1/4” BSPP
LB08-4-S-3G 350 Bar 08-4 3/4-16 4 Way 3/8” BSPP
LB10-4-S-2G 350 Bar 10-4 7/8-14 4 Way 1/4” BSPP
LB10-4-S-3G 350 Bar 10-4 7/8-14 4 Way 3/8 BSPP

6.11
Cartridge Valves

Bodies BSPP Ports

Aluminium and Steel Housings to suit Cartridge Valves
Common Cavities

A B C D E F G H I J K

LB08-4-S-** 31.75 32.5 65 85.9 72.1 29.7 7.11 50.8 15.5 43.9 7.14

LB10-4-S-** 35 32 65 85.9 72.1 34.5 7.11 50.8 19 50.5 7.14

6.12
Sun Type Cavity Cartridges and Bodies
Aluminum and Steel

Counterbalance Cartridge - Sun Type Cavity

Range Max Flow
Part Number Description Ratio Cavity Check
Bar Rate

LCBCA-LAN Counter Balance 70-280 3:1 T-11A 0.3 Bar 60 LPM

LCBCA-LHN Counter Balance 70-280 3:1 T-11A 1.7Bar 60 LPM
LCBEA-LAN Counter Balance 70-280 3:1 T-2A 0.3 Bar 120 LPM

Bodies to Suit on Page 11

Relief Valve Cartridge - Sun Type Cavity

Flow
Part Number Description Range Cavity
Rate

LRPEC-LCN Pilot Op Relief 10-350 Bar T-10A 100 LPM

LRPEE-LAN Pilot op Relief 7 –210 Bar T-10A 95 LPM

LRPGC-LAN Pilot op Relief 7- 210 Bar T-3A 200 LPM

Bodies to Suit on Page 11

OtherCartridgesAvailableonRequest

6.13
Sun Type Cavity Bodies
Aluminum and Steel
Aluminium Bodies
Part Number Description Cavity Ports
LBCV 3 Port Body T-2A 1/2” BSPP
LBCW 3 Port Body T-2A 3/4” BSPP
LCAV 2 Port Body T-3A 1/2” BSPP
LCAW 2 Port Body T-3A 3/4” BSPP
LCAX 2 Port Body T-3A 1” BSPP
LECU 3 Port Body T-11A 3/8” BSPP
LECV 3 Port Body T-11A 1/2” BSPP
LFAT 2 Port Body T-10A 1/4” BSPP
LFAU 2 Port Body T-10A 3/8” BSPP
LFAV 2 Port Body T-10A 1/2” BSPP
LFAW 2 Port Body T-10A 3/4” BSPP
LHCW 3 Port Body T-17A 3/4” BSPP
LHCY 3 Port Body T-17A 1 1/4” BSPP
LIAW 2 Port Body T-16A 3/4” BSPP
LIAX 2 Port Body T-16A 1” BSPP
LIAY 2 Port Body T-16A 1 1/4” BSPP
LYAV 4 Port Body T-2A 1/2” BSPP
LYAW 4 Port Body T-2A 3/4” BSPP
LYEV 4 Port Body T-11A 1/2” BSPP

Steel Bodies
Part Number Description Cavity Flow Rate
LBCW-S 3 Port Body T-2A 3/4” BSPP
LCAW-S 2 Port Body T-3A 3/4” BSPP
LCAW-S 2 Port Body T-3A 1” BSPP
LECV-S 3 Port Body T-11A 1/2” BSPP
LFAV-S 2 Port Body T-10A 1/2” BSPP
LHCY-S 3 Port Body T-17A 1 1/4” BSPP
LIAX-S 2 Port Body T-16A 1” BSPP
LYAW-S 4 Port Body T-2A 3/4” BSPP
LYEV-S 4 Port Body T-11A 1/2” BSPP

6.14
Special Purpose Valves & Blocks
HD supply and design special purpose blocks and manifolds in Steel and
Alloy.
We supply to your drawings & circuits or we can
offer

Quick Hitch Valve

Steel Body, 3/8” BSPP Ports, 207 Bar including LED Din Plug
Flow
Part Number Description Cavity
Rate
QHV-08-4-12V 12V 2 Position 08-4 11 LPM
QHV-08-4-24V 24V 2 Position 08-4 11 LPM

Quick Hitch Valve with Pressure Reducer

Steel Body, 3/8” BSPP Ports, 350 Bar including LED Din Plug
Flow
Part Number Description Cavity
Rate
QHV-R-08-4-12V 12V 2 Position 08-4 11 LPM
QHV-R-08-4-24V 24V 2 Position 08-4 11 LPM

IMALCO
AULICS

INLINE &
CARTRIDGE VALVES
Page

Inline Needle & Flow Controls 7.01

Ball Valves 7.02
Priority Flow Valves Lever or Knob 7.03
Inline Relief Valves CBF 7.04
Inline Reducing Valves CBF 7.05
Inline Sequence Valves CBF 7.05
Subplates with Relief /Priority Flow CBF 7.06
Subplates and Manifolds 7.07
Hi Low Double Pump Unloading Blocks 7.08
Lock Valves 7.09
Overcentre Valves 7.010
Priority Flow Valves 7.011
Flow Dividers 7.012
Shuttle Valves 7.013
Check Valves 7.013
Directional Valves Standard and Rotary 7.014
Direct Motor Mounted Valves 7.015
Solenoid Cartridge Valves 7.016
Spare Parts 7.017
FLOWCONTROLVALVES

Needle Valves

MAX MAX
PART NUMBER PORTS
FLOW PRESS
STB-G14 (DV-8) 15 LPM 350 ¼” BSPP
STB-G38 (DV-10) 30 LPM 350 3/8” BSPP
STB-G12 (DV-12) 45 LPM 350 ½” BSPP
STB-G34 (DV-16) 60 LPM 300 ¾” BSPP
STB-G1 (DV-20) 76 LPM 300 1” BSPP

Flow Control with reverse free flow

MAX MAX
PART NUMBER PORTS
FLOW PRESS
STU-G14 (DRV-8) 15 LPM 350 ¼” BSPP
STU-G38 (DRV-10) 30 LPM 350 3/8” BSPP
STU-G12 (DRV-12) 45 LPM 350 ½” BSPP
STU-G34 (DRV-16) 60 LPM 350 ¾” BSPP
STU-G1 (DRV-20) 76 LPM 300 1” BSPP

Mounting Nuts
PART NUMBER Panel Mount Nuts
ST-14-Nuts To Suit STB & STU –14
ST-38-Nuts To Suit STB & STU –38
ST-12-Nuts To Suit STB & STU –12
ST-34-Nuts To Suit STB & STU –34
ST-1-Nuts To Suit STB & STU –1

Needle Valves

MAX MAX
PART NUMBER PORTS
FLOW PRESS
LG-8 (DV-8) 15 LPM 315 ¼” BSPP
LG-10 (DV-10) 30 LPM 315 3/8” BSPP
LG-12 (DV-12) 45 LPM 315 ½” BSPP
LG-16 (DV-16) 60 LPM 315 ¾” BSPP

Flow Control with reverse free flow

MAX MAX
PART NUMBER PORTS
FLOW PRESS
LAG-8 (DRV-8) 15 LPM 315 ¼” BSPP
LAG-10 (DRV-10) 30 LPM 315 3/8” BSPP
LAG-12 (DRV-12) 45 LPM 315 ½” BSPP
LAG-16 (DRV-16) 60 LPM 315 ¾” BSPP

INLINE&CARTRIDGEVALVES 7.1
HIGHPRESSUREBALLVALVES

2 WAY BALL VALVES

MAX MAX
PART NUMBER PORTS
FLOW PRESS
KHB-G14 15 LPM 500 ¼” BSPP
KHB-G38 30 LPM 500 3/8” BSPP
KHB-G12 60 LPM 500 ½” BSPP
KHB-G34 80 LPM 380 ¾” BSPP
KHB-G1 125 LPM 350 1” BSPP
KHB-G114 125 LPM 280 1 ¼” BSPP
KHB-G112 125 LPM 220 1 ½” BSPP

3 WAY BALL VALVES

MAX MAX
PART NUMBER PORTS
FLOW PRESS
KHB3K-G14 15 LPM 380 ¼” BSPP
KHB3K-G38 30 LPM 380 3/8” BSPP
KHB3K-G12 60 LPM 320 ½” BSPP
KHB3K-G34 80 LPM 300 ¾” BSPP
KHB3K-G1 125 LPM 280 1” BSPP

INLINE&CARTRIDGEVALVES 7.2
PRIORITYFLOWCONTROLVALVES(also on Page 6.011 & 6.012)

Lever Operated Priority Flow

BSPP Ports
With or Without Relief

MAX CF FLOW
PART NUMBER PORTS FLOW P PRIORITY
RELIEF

FC51-12 1/2” BSPP 80 0-80 LPM No Relief

FC51-34 3/4” BSPP 100 0-100 LPM No Relief

FCR51-12 1/2” BSPP 80 0-80 LPM With Relief

FCR51-34 3/4” BSPP 100 0-100 LPM With Relief

220 LPM Priority Flow

220 LPM Max
With Relief
MAX MAX FLOW C MAX
PART NUMBER P T C
FLOW P PRIORITY PRESS
RFAVLP10-12C ½ BSPP 100 LPM 65 LPM 250
RFAVLP10-10C 1” BSPP 220 LPM 190 LPM 250

Steel Priority Flow

Steel With or without Relief
MAX MAX FLOW C MAX
PART NUMBER P T B C
FLOW P PRIORITY PRESS
RFG ¾ BSPP ½ BSPP 90 LPM 50 LPM 350 BAR
RFGV ¾ BSPP ½ BSPP 90 LPM 50 LPM 350 BAR

More Priority Flow Valves

on Page 6.011 & 6.012

INLINE&CARTRIDGEVALVES 7.3
RELIEFVALVES

INLINERELIEFVALVES

MAX MAX
PART NUMBER P T
FLOW PRESS
VLP401402 ¼ BSPP 25 LPM 250 BAR
VLP403802 3/8 BSPP 35 LPM 250 BAR
VLP401202 ½ BSPP 40 LPM 250 BAR

VLP803402 ¾ BSPP 80 LPM 250 BAR

VLP1303402 ¾ BSPP 100 LPM 250 BAR
VLP1301002 1” BSPP 130 LPM 250 BAR

INLINE OR TANK MOUNTED RELIEF VALVES

MAX MAX
PART NUMBER P T
FLOW PRESS
VLP40L3802 3/8 BSPP 35 LPM 250 BAR
VLP40L1202 ½ BSPP 40 LPM 250 BAR
VLP80L1202 ½ BSPP 80 LPM 250 BAR
VLP80L3402 ¾ BSPP 80 LPM 250 BAR
VLP130L3402 ¾” BSPP 100 LPM 250 BAR
VLP130L1002 1” BSPP 130 LPM 250 BAR

200LPMRELIEFVALVE STEEL

STEEL

MAX MAX
PART NUMBER P T
FLOW PRESS
VLP200P1003 1” BSPP 200 LPM 350 BAR

SPRINGS

Pilot Operated CODE STD Setting Bar Adj Pressurre COLOUR

(Q=5L/min Range (Bar)
03 250 60 – 350 BLACK

INLINE&CARTRIDGEVALVES 7.4
INLINEVALVES

CROSSLINERELIEFVALVES

MAX MAX
PART NUMBER V V1
FLOW PRESS
VLP40DIL3802 3/8 BSPP 40 LPM 250 BAR
VLP40DIL1202 ½ BSPP 40 LPM 250 BAR
VLP80DIL3402 ¾ BSPP 80 LPM 250 BAR
VLP130DIL1002 1” BSPP 130 LPM 250 BAR

Springs
Code Std Setting Adj Pressure Colour
(Q=5 Lpm) Range (Bar)
01 80 20-100 White
02 180 40-250 Yellow
03 250 60-350 Black

INLINE PRESSURE REDUCER

Max Max inlet work- Max regulated

R
PART NUMBER P T Flow ing pressure pressure
eg
LPM Bar Bar
RP251201A ½ BSPP 25 250 100
RP251202A ½ BSPP 25 250 180

SPRINGS
STD Setting Adj Pressurre
CODE Range COLOUR
Bar(Q=5L/min
Bar
01 80 20 – 100 YELLOW
02 150 40 – 180 BLACK

INLINE SEQUENCE VALVE

MAX MAX
PART NUMBER P C
FLOW PRESS
VSQ40LCC1202 ½ BSPP 40 LPM 250 BAR
VSQ80LCC1202 ½ BSPP 80 LPM 250 BAR

INLINE&CARTRIDGEVALVES 7.5
SUBPLATES&MANIFOLDS

CETOP 3 SUBPLATE INCLUDING RELIEF

PORTS BSPP MAX MAX

PART NUMBER
P T A B M FLOW PRESS
BEC3VLP4002 3/8 ¼ 40 LPM 250 BAR

Springs
Code Std Setting Adj Pressure Colour
(Q=5 Lpm) Range (Bar)
01 80 20-100 White
02 180 40-250 Yellow
03 250 60-350 Black

CETOP 5 SUBPLATE INCLUDING RELIEF

PORTS BSPP MAX MAX

PART NUMBER
P T A B M FLOW PRESS
BEC5VLP801202 ½ BSPP ¼ 80 LPM 250 BAR

Springs
Code Std Setting Adj Pressure Colour
(Q=5 Lpm) Range (Bar)
01 80 20-100 White
02 180 40-250 Yellow
03 250 60-350 Black

CETOP 3 SUBPLATE INC RELIEF AND PRIORITY FLOW

PORTS BSPP Regulated flow MAX MAX

PART NUMBER
P T A B M LPM FLOW PRESS
BEC3VLP40RFP50 3/8 ¼ 0 - 25 40 LPM 250 BAR

Springs
Code Std Setting Adj Pressure Colour
(Q=5 Lpm) Range (Bar)
01 80 20-100 White
02 180 40-250 Yellow
03 250 60-350 Black

INLINE&CARTRIDGEVALVES 7.6
MANIFOLDBLOCKS

CETOP 3 Manifolds Including Relief Valve

ParallelManifolds

MAX MAX
PART NUMBER STATIONS P&T A&B
FLOW PRESS
BEC3VLP40AL 1 ½” BSPP 3/8” BSPP 40 LPM 250 BAR
BEC3VLP402AL 2 ½” BSPP 3/8” BSPP 40 LPM 250 BAR
BEC3VLP403AL 3 ½” BSPP 3/8” BSPP 40 LPM 250 BAR
BEC3VLP404AL 4 ½” BSPP 3/8” BSPP 40 LPM 250 BAR
BEC3VLP405AL 5 ½” BSPP 3/8” BSPP 40 LPM 250 BAR
BEC3VLP406AL 6 ½” BSPP 3/8” BSPP 40 LPM 250 BAR

CETOP 3 Relief Block

Stackable
PORTS BSPP MAX MAX
PART NUMBER
P&T P1 & T1 FLOW PRESS
BPC3VLP4002 1/2” BSPP 3/8” BSPP 30 LPM 250 BAR

CETOP 3 Mounting Block

Stackable

PORTS BSPP MAX MAX

PART NUMBER
P T A&B FLOW PRESS
PC3 ¼” 3/8” 3/8” 30 LPM 250 BAR

INLINE&CARTRIDGEVALVES 7.7
UNLOADINGVALVES&BLOCKS

High low
DOUBLE Valves
PUMP INLINE
PORTS BP MAX MAX
PART NUMBER BSPP Low pressure FLOW PRESS
AP BP T U M valve setting LPM BAR
VEPVLP403802 1/4 3/8 1/2 3/8 1/4 20 - 100 BAR 40 250
VEPVLP801202 3/8 1/2 3/4 1/2 1/4 20 – 100 BAR 80 250

DOUBLE
CETOP3
PUMP
BP
PORTS MAX MAX
PART NUMBER Low pressure
BSPP FLOW PRESS
valve setting
AP BP T A B M 30 250
VEPBEC3VLP403802 20 – 100 BAR
1/4 3/8 1/2 3/8 3/8 1/4 LPM BAR

DOUBLE CETOP5
PUMP PORTS
BP
MAX MAX
PART NUMBER Low pressure
BSPP FLOW PRESS
valve setting
AP BP T A B M 100 250
VEPBEC53402 20 – 100 BAR
3/4 1/4 LPM BAR

INLINE&CARTRIDGEVALVES 7.8
LOCKVALVESInline

Aluminium
Single Lock Valve
PILOT MAX MAX
PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
VBSL14 ¼” BSPP 4:1 20 LPM 250 BAR
VBSL38 3/8 BSPP 4:1 35 LPM 250 BAR
VBSL12 ½ BSPP 4:1 50 LPM 250 BAR
VBSL34 ¾” BSPP 4:1 80 LPM 250 BAR

STEEL Single Lock Valve

PILOT MAX MAX
PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
VBSL14A ¼” BSPP 4:1 20 LPM 250 BAR
VBSL38A 3/8 BSPP 4:1 35 LPM 250 BAR
VBSL12A ½ BSPP 4:1 50 LPM 250 BAR
VBSL34A ¾” BSPP 4:1 80 LPM 250 BAR

Aluminium
Double Lock Valve
PILOT MAX MAX
PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
VBDL14 ¼” BSPP 4:1 25 LPM 250 BAR
VBDL38 3/8 BSPP 4:1 35 LPM 250 BAR
VBDL12 ½ BSPP 4:1 50 LPM 250 BAR
VBDL34 ¾” BSPP 4:1 80 LPM 250 BAR

STEEL Double Lock Valve

PILOT MAX MAX
PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
VBDL14A ¼” BSPP 4:1 25 LPM 250 BAR
VBDL38A 3/8 BSPP 4:1 35 LPM 250 BAR
VBDL12A ½ BSPP 4:1 50 LPM 250 BAR
VBDL34A ¾” BSPP 4:1 80 LPM 250 BAR

CYLINDERMOUNTINLINELOCKVALVES

PILOT MAX MAX

Aluminium PART NUMBER V1 V2 C1 C2 TYPE RATIO FLOW PRESS
VBS14SF ¼” BSPP Single 4:1 20 LPM 250 BAR
VBS38SF 3/8” BSPP Single 4:1 35 LPM 250 BAR
VBS12SF ½ BSPP Single 4:1 50 LPM 250 BAR
VBS34SP ¾” BSPP Single 4:1 80 LPM 250 BAR
VBD14SF ¼” BSPP Double 4:1 20 LPM 250 BAR
VBD38SF 3/8” BSPP Double 4:1 35 LPM 250 BAR
VBD12SF 1/2” BSPP Double 4:1 50 LPM 250 BAR
VBD34SP ¾” BSPP Double 4:1 80 LPM 250 BAR

PILOT MAX MAX

STEEL PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
VBS14SFA ¼” BSPP 4:1 20 LPM 250 BAR
VBS38SFA 3/8” BSPP 4:1 35 LPM 250 BAR
VBS12SFA ½ BSPP 4:1 50 LPM 250 BAR
VBS34SPA ¾” BSPP 4:1 80 LPM 250 BAR
VBD14SFA ¼” BSPP 4:1 20 LPM 250 BAR
VBD38SFA 3/8” BSPP 4:1 35 LPM 250 BAR
VBD12SFA 1/2” BSPP 4:1 50 LPM 250 BAR
VBD34SPA ¾” BSPP 4:1 80 LPM 250 BAR

INLINE&CARTRIDGEVALVES 7.9
OVERCENTREVALVES

COUNTERBALANCE
SINGLEOVERCENTREVALVES ExternalPilot

PILOT MAX MAX

PART NUMBER V2 C2 PILOT
RATIO FLOW PRESS
OVCSE3802 3/8 BSPP ¼ BSPP 4.25:1 40 LPM 250 BAR
OVCSE1202 ½ BSPP ¼ BSPP 4.25:1 60 LPM 250 BAR
OVCSE3402 ¾ BSPP ¼ BSPP 4.25:1 100 LPM 250 BAR

Low Pressure 20 - 200 Bar Range Available

SINGLEOVERCENTREVALVES InternalPilot

PILOT MAX MAX

PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
OVCSEL3802 3/8 BSPP 4.25:1 40 LPM 250 BAR
OVCSEL1202 ½ BSPP 4.25:1 60 LPM 250 BAR
OVCSEL3402 ¾ BSPP 4.25:1 100 LPM 250 BAR

Low Pressure 20 - 200 Bar Range Available

DOUBLEOVERCENTREVALVES

PILOT MAX MAX

PART NUMBER V1 V2 C1 C2
RATIO FLOW PRESS
OVCDEL3802 3/8 BSPP 4.25:1 40 LPM 250 BAR
OVCDEL1202 ½ BSPP 4.25:1 60 LPM 250 BAR
OVCDEL3402 ¾ BSPP 4.25:1 100 LPM 250 BAR
OVCDEL1002 1” BSPP 4.25:1 120 LPM 250 BAR

Low Pressure 20 - 200 Bar Range Available

MODULAR OVERCENTRE VALVES

CETOP 3 and
CETOP 5
SINGLE

PILOT MAX MAX AJUSTMENT

PART NUMBER MOUNT
RATIO FLOW PRESS RANGE
OVCSEFC301 CETOP 3 4.25:1 35 LPM 250 BAR 20- 200 BAR
OVCSEFC302 CETOP 3 4.25:1 35 LPM 250 BAR 50 – 350 BAR

DOUBLE

PILOT MAX MAX AJUSTMENT

PART NUMBER MOUNT
RATIO FLOW PRESS RANGE
OVCDEFC301 CETOP 3 4.25:1 35 LPM 250 BAR 20- 200 BAR
OVCDEFC302 CETOP 3 4.25:1 35 LPM 250 BAR 50 – 350 BAR
OVCDEFC502 CETOP 5 4.25:1 250 BAR 50-350 BAR

INLINE&CARTRIDGEVALVES 7.10
PRIORITYFLOW VALVES

PRIORITYFLOW INLINE

MAX MAX FLOW C MAX

PART NUMBER C B P
FLOW P PRIORITY PRESS
RFP5012B ½ BSPP 40 LPM 25 LPM 250 BAR

RFP9034B ¾ BSPP 90 LPM 50 LPM 250 BAR

MAX MAX FLOW C MAX

PART NUMBER P B C
FLOW P PRIORITY PRESS
RFPA38A 3/8 BSPP 60 LPM 35 LPM 250

RFPA12A ½ BSPP 90 LPM 55 LPM 250

Upto220LPM

MAX MAX FLOW C MAX

PART NUMBER P T C
FLOW P PRIORITY PRESS
RFAVLP10-12C ½ BSPP 100 LPM 65 LPM 250

RFAVLP10-10C 1” BSPP 220 LPM 190 LPM 250

INLINE&CARTRIDGEVALVES 7.11
PRIORITYVALVES&FLOWDIVIDERS

STEEL
MAX MAX FLOW C MAX
PART NUMBER P T B C
FLOW P PRIORITY PRESS
RFG ¾ ½ ½ 90 LPM 50 LPM 350 BAR
RFGV ¾ ½ ½ ½ 90 LPM 50 LPM 350 BAR

ModularCetopPriorityFlow

Cetop
CETOP MAX MAX FLOW MAX
PART NUMBER
FLOW P PRIORITY PRESS
RFP50FC3A01 CETOP 3 40 LPM 25 LPM 250 BAR

RFP90FC5A01 CETOP 5 90 LPM 50 LPM 250 BAR

Inline50/50FlowDivider

PART NUMBER V C1 C2 RATIO RANGE MAX PRESS

DFR1202 ½ BSPP 3/8 BSPP 3/8 BSPP 50%-50% 210 BAR

DFR1203 ½ BSPP 3/8 BSPP 3/8 BSPP 50%-50% 210 BAR
DFR1204 ½ BSPP 3/8 BSPP 3/8 BSPP 50%-50% 26 – 40 LPM 210 BAR
DFR1205 ½ BSPP 3/8 BSPP 3/8 BSPP 50%-50% 40 – 70 LPM 210 BAR

INLINE&CARTRIDGEVALVES 7.12
SHUTTLE&CHECKVALVES

INLINE SHUTTLE VALVES

MAX
PART NUMBER V V1 U MAX FLOW
PRESS
VSF14 ¼ BSPP 20 LPM 250 BAR
VSF38 3/8 BSPP 40 LPM 250 BAR
VSF12 ½ BSPP 60 LPM 250 BAR

INLINE CHECK VALVES

1 BAR CRACKING
MAX
PART NUMBER V1 V2 MAX FLOW
PRESS
VU14SF01 ¼ BSPP 15 LPM 500 BAR
VU38SF01 3/8 BSPP 30 LPM 500 BAR
VU12SF01 ½ BSPP 50 LPM 500 BAR
VU34SF01 ¾ BSPP 90 LPM 350 BAR
VU10SP01 1” BSPP 150 LPM 350 BAR

5 BAR CRACKING
MAX
PART NUMBER V1 V2 MAX FLOW
PRESS
VU14SF03 ¼ BSPP 15 LPM 500 BAR
VU38SF03 3/8 BSPP 30 LPM 500 BAR
VU12SF03 ½ BSPP 50 LPM 500 BAR
VU34SF03 ¾ BSPP 90 LPM 350 BAR
VU10SP03 1” BSPP 150 LPM 350 BAR

INLINE&CARTRIDGEVALVES 7.13
MANUALLEVEROPERATEDDIRECTIONALVALVES

Compact Manual Control Valves with Relief

POSI- CON- MAX MAX
PART NUMBER SPOOL
TIONS TROL FLOW PRESS
DM1A1 3 1 A 30 LPM 350 BAR
DM1A2 3 2 A 30 LPM 350 BAR
DM1A3 3 3 A 30 LPM 350 BAR
DM1D1 3 1 D 30 LPM 350 BAR
DM1D3 3 3 D 30 LPM 350 BAR
DM1Q2 2 2 D 30 LPM 350 BAR

CETOP 3 (NG6)
POSI- CON- MAX MAX
PART NUMBER SPOOL
TIONS TROL FLOW PRESS
DC3A1 3 1 A 30 LPM 350 BAR
DC3A2 3 2 A 30 LPM 350 BAR
DC3A3 3 3 A 30 LPM 350 BAR
DC3D1 3 1 D 30 LPM 350 BAR
DC3D3 3 3 D 30 LPM 350 BAR
DC3Q2 2 2 Q 30 LPM 350 BAR
DC3R2 2 2 R 30 LPM 350 BAR

MANUAL ROTARY DIRECTIONAL VALVE

PART NUMBER MAX FLOW MAX PRESS

DM4 10 LPM 400

INLINE&CARTRIDGEVALVES 7.14
MOTORMOUNTEDVALVES

Crossline Relief

MAX MAX
PART NUMBER V V1
FLOW PRESS
VLP40DFMD02OMP ½ BSPP 40 LPM 250 BAR
VLP40DFMD102OMS ½ BSPP 40 LPM 250 BAR

Single Overcentre Valves with Brake Release Shuttle

PILOT MAX MAX

PART NUMBER V1 V2 F
RATIO FLOW PRESS
OVCSEFMDSF1202OMP ½ BSPP ¼” 4.25:1 60 LPM 250 BAR
OVCSEFMDSF12102OMS ½ BSPP ¼” 4.25:1 60 LPM 250 BAR
OVCSEFMDSFC1202OMP ½ BSPP ¼” 4.25:1 60 LPM 250 BAR

Dual Overcentre Valves with Brake Release Shuttle

PILOT MAX MAX

PART NUMBER V1 V2 F
RATIO FLOW PRESS
OVCDEFMDSF1202OMP ½ BSPP ¼” 4.25:1 60 LPM 250 BAR
OVCDEFMDSF12102OMS ½ BSPP ¼” 4.25:1 60 LPM 250 BAR
OVCDEFMDSFC1202OMP ½ BSPP ¼” 4.25:1 60 LPM 250 BAR

INLINE&CARTRIDGEVALVES 7.15
SOLENOIDCARTRIDGEVALVES

MSV30 MSV31
Normally Closed Normally open

CARTRIDGES
Max Max
PART NUMBER
Flow Pressure
MSV30-0-0000-0 Normally Closed 20 LPM 210 Bar
MSV31-0-0000-0 Normally Open 20 LPM 210 Bar

BODIES
Max Max
PART NUMBER PORTS
Flow Pressure
BFC 3/4-16 38 3/8” BSPP 20 LPM 210 Bar

SOLENOIDS

PART NUMBER VOLTAGE

M13040001 12VDC
M13040002 24VDC
M13040006 110VAC
M13040007 240VAC

Solenoid Unloading Relief Valve

Max Max
PART NUMBER PORTS
Flow Pressure
EV70VLP803402A-12VDC 3/4” BSPP 70 LPM 210 Bar
EV70VLP803402A-24VDC 3/4” BSPP 70 LPM 210 Bar

INLINE&CARTRIDGEVALVES 7.16
SPAREPARTS

RELIEF VALVE CARTRIDGES

PRESSURE
PART NUMBER NOM FLOW RATE
RANGE
VLP40C01A 20-100 BAR 40 LPM
VLP40C02A 40-250 BAR 40 LPM
VLP40C03A 60-350 BAR 40 LPM
VLP80C01A 20-100 BAR 80 LPM
VLP80C02A 40-250 BAR 80 LPM
VLP80C03A 60-350 BAR 80 LPM
VLP130CD01A 20-100 BAR 130 LPM
VLP130CD02A 40-250 BAR 130 LPM
VLP130CD03A 60-350 BAR 130 LPM
VLP200PC03A 60-350 BAR 200 LPM

KNOB KIT

PART NUMBER TO SUIT CARTRIDGE

VLP-KNOB KIT M8 VLP40
VLP-KNOB KIT M10 VLP80 & VLP130

SPRINGS

PART NUMBER RANGE TO SUIT CARTRIDGE

M022 20-100 BAR VLP40
M023 40-250 BAR VLP40
M024 60-350 BAR VLP40
M025 20-100 BAR VLP80/130
M026 40-250 BAR VLP80/130
M027 60-350 BAR VLP80/130
M059 20-200 BAR OVC

SEAL KITS
VLP40SK
VLP80SK
VLP130SK

PRIORITY FLOW CARTRIDGES

RFP50CB 50 LPM
RFP90CB 90 LPM

INLINE&CARTRIDGEVALVES 7.17
RAULICS

Hydraulic Tanks
& Accessories
Page

Suction Strainers 8.01

Level and Temp gauges 8.02

EYE Type Sight Glass 8.02

Filler Breathers 8.03

Return Tank Top Filters 8.04

Return Under Tank Top Filters 8.05

Hydraulic Tanks Steel 8.06

Hydraulic Tanks Aluminium 8.07

Spin On Filters 8.08

Spin On Filter Data 8.09

Tank Top Spin On Filter 8.010

Suction Spin On Filters 8.010

Pressure Gauges 8.011

COOLERS 8.012
SUCTIONSTRAINERS

Standard filtration is 149 micron nominal

Working temperature -40 to +80 degrees Celsius
Old Type NOM.
PART NUMBER MICRON PORT
FLOW
SC3-002 ST14BB 8 LPM 149 1/4" BSP
SC3-003 ST38BB 12LPM 149 3/8" BSP
SC3-005 ST12BB 20 LPM 149 1/2" BSP
SC3-007 ST34BB 28 LPM 149 3/4" BSP
SC3-010 ST100ABB 40 LPM 149 1" BSP
SC3-015 ST114BB 60 LPM 149 1 1/4" BSP
SC3-020 ST112ABB 80 LPM 149 1 ½” BSP
SC3-030 ST112BB 120 LPM 149 1 1/2" BSP
SC3-050 ST200ABB 200 LPM 149 2" BSP
SC3-075 ST212BB 300 LPM 149 2 1/2" BSP
SC3-100 ST300BB 400 LPM 149 3" BSP

125 MICRON A B C CH
Part Number Old Type LPM BSPP
SC3-002 ST-14 8 ¼ 90 46 24
SC3-003 ST-38 12 3/8 90 46 24
SC3-005 ST-12 20 ½ 105 46 30
SC3-007 ST-34 28 ¾ 109 64 36
SC3-010 ST-100A 40 1 139 64 46
SC3-015 ST-114 60 1¼ 139 86 52
SC3-020 ST-112A 80 1½ 168 86 60
SC3-030 ST-112B 120 1½ 200 86 60
SC3-050 ST-200A 200 2 260 100 70
SC3-075 ST-212 300 2½ 211 150 90
SC3-100 ST-300 400 3 272 150 100

HYDRAULICTANKS&ACCESSORIES 8.1
LEVELANDTEMPERATUREINDICATORS

PART NUMBER Old Series SIZE TYPE

LG2-03-M10 LI-1-M10 76MM LEVEL ONLY
LG2-03-M12 LI-1-M12 76MM LEVEL ONLY
LG2-03T-M10 LI/T-1-M10 76MM LEVEL & TEMP
LG2-03T-M12 LI/T-1-M12 76MM LEVEL & TEMP
LG2-05-M10 LI-2-M10 127MM LEVEL ONLY
LG2-05-M12 LI-2-M12 127MM LEVEL ONLY
LG2-05T-M10 LI/T-2-M10 127MM LEVEL & TEMP
LG2-05T-M12 LI/T-2-M12 127MM LEVEL & TEMP
LG2-10-M12 LI-3 254MM LEVEL ONLY
LG2-10T-M12 LI/T-3 254MM LEVEL & TEMP
LIE (M12) LIE 127MM ELECTRICAL LOW LEVEL

Type A B C D E F Kgs
LG2-03 76 37 20 34 M10 / M12 108 0.20
LG2-05 127 76 20 34 M10 / M12 159 0.25
LG2-10 254 203 20 34 M10 / M12 286 0.30

CAST ALLOY BODY

PART NUMBER SIZE TYPE THREAD
LG6-03T-M12 76mm LEVEL & TEMP M12
LG6-05T-M12 127mm LEVEL & TEMP M12
LG6-10T-M12 254mm LEVEL & TEMP M12

PART NUMBER SIZE THREAD

SG1-03B 3/8 3/8” BSPP
SG1-04B 1/2 1/2” BSPP
SG1-06B 3/4 3/4” BSPP
SG1-08B 1 1” BSPP
SG1-10B 1 1/4 1 1/4” BSPP
SG1-12B 1 1/2 1 1/2” BSPP

PART NUMBER SIZE THREAD

SGP-03B 3/8 3/8” BSPP
SGP-04B 1/2 1/2” BSPP
SGP-06B 3/4 3/4” BSPP
SGP-08B 1 1” BSPP
SGP-10B 1 1/4 1 1/4” BSPP
SGP-12B 1 1/2 1 1/2” BSPP

HYDRAULICTANKS&ACCESSORIES 8.2
FILLERBREATHERS

PART NUMBER RATED FLOW MOUNTING TYPE

FB-1 0.30 M3/MIN 41MM DIA FLANGE
FB-1P 0.30 M3/MIN 41MM PRESSURISED
FB-2 0.75 M3/MIN 73MM DIA FLANGE
FB-2P 0.75 M3/MIN 73MM PRESSURISED
FB-3 0.75 M3/MIN 73MM DIA FLANGE
FBC-2 0.75 M3/MIN 73MM LOCKING
FB-3P 0.75 M3/MIN 73MM PRESSURISED

AB-1 0.30 M3/MIN 1/4" BSPP

AB-2 0.75 M3/MIN 3/4" BSPP
FSB-25BM 0.75 M3/MIN SIDE MOUNT
FSB-25HN 0.75 M3/MIN HIGH NECK
PB-25 (ABT) 0.75 M3/MIN 1 1/2" PUSH ON

TYPE Rated Flow Rating A B C D E WEIGHT Kg

AB-1 0.30m3/min 40 ¼”BSPP 55 7 13 47 0.06
AB-2 0.75m3/min 40 ¾”BSPP 71 7 16 80 0.20

TYPE Rated Flow Rating A B C D E WEIGHT SCREWS

Kg
FB-1 0.30m3/min 40 52 48 63 29 111 0.10 3 M5X12
FB-2 0.75m3/min 40 83 56 78 50 134 0.30 6 M5X12
FB-3 0.75m3/min 40 83 56 148 50 204 0.35 6 M5X12

HYDRAULICTANKS&ACCESSORIES 8.3
UNDERTANKTOPRETURNLINEFILTERS

Max. working pressure 3 bar

Working temperature -40 to +90 degrees Celsius
NOM.
PART NUMBER MICRON PORT
FLOW
RTF3-10 40 LPM 10 1/2" BSP
RTF6-10 60 LPM 10 3/4" BSP
RTF10-10 85 LPM 10 1" BSP
RTF18-10 200 LPM 10 1 1/4" BSP
RTF22-10 220LPM 10 1 1/4" BSP
RTF33-10 250 LPM 10 1 1/2" BSP
RTF60-10 320 LPM 10 1 1/2" BSP

ELEMENTs to suit
NOM.
PART NUMBER MICRON
FLOW
RTFE3-10 40 LPM 10
RTFE6-10 60 LPM 10
RTFE10-10 85 LPM 10
RTFE18-10 200 LPM 10
RTFE22-10 220LPM 10
RTFE33-10 250 LPM 10
RTFE60-10 320 LPM 10

Other Micron ratings available on request

HYDRAULICTANKS&ACCESSORIES 8.4
UNDERTANKTOPRETURNLINEFILTERS
A Weight
Filter Element BSP B C D E F G H I L
Kg
P
RTF-3 RTFE-3 ½” 33 22 136 24 66 76 51 90 7 .5
RTF-6 RTFE-6 ¾” 44 28 170 28 88 87 67 115 8.5 1
RTF-8 RTFE-10 ¾” 44 28 215 28 88 87 67 115 8.5 1.1
RTF-10 RTFE-10 1” 44 28 215 28 88 87 67 115 8.5 1.1
RTF-18 RTFE-18 1 ¼” 54 335 40 129 97 96 175 10.7 2.2
RTF-22 RTFE-22 1 ¼” 60 38.5 272 50 173 103 115 220 11.5 3
RTF-33 RTFE-33 1 ½” 60 38.5 332 50 173 103 115 220 11.5 3.4
RTF-60 RTFE-60 1 ½” 60 38.5 375 50 173 103 115 220 11.5 3.4

Under tank lid plumbing for direct connections

to pump or manifold return line
MAX WORKING PRESSURE 25 BAR
FLOWS UPTO 250LPM
PART NUMBER PORTING NOM FLOW MICRON
UCF12-10 1/2" BSPP 40 LPM 10
UCF34-10 3/4" BSPP 60 LPM 10
UCF100-10 1" BSPP 85 LPM 10
UCF114-10 1 1/4" BSPP 200 LPM 10

HYDRAULICTANKS&ACCESSORIES 8.5
UNDERTANKTOPRETURNLINEFILTERS

Model A B C D E F G H P
BSPP
UCF 12 ½” 88 72 29 7 40 11 49 100
UCF 34 ¾” 110 68 38 9 52 14 61 126
UCF 100 1” 110 110 38 9 54 14 61 126
UCF 114 1 ¼” 156 191 48 9 62 18 83 175

ELEMENTS to suit

PART NUMBER NOM FLOW MICRON

UE12-10 40 LPM 10
UE34-10 60 LPM 10
UE100-10 85 LPM 10
UE114-10 200 LPM 10

HYDRAULICTANKS&ACCESSORIES 8.6
RESERVOIRSANDLIDS

Not Including Lid

NOM. HEIGHT
PART NUMBER LENGTH WIDTH
CAPACITY INC FEET
OT-12 13 335 270 290
OT-16 20 410 325 305
OT-30 30 470 375 335
OT-55 55 600 470 365
OT-75 72 600 470 455
OT-100 98 675 520 505
OT-180 160 805 620 555

Oil Tank Capacity A B C D E M O Q Cover

Lt Fix
OT-12 13 335 270 235 1.5 4 208 290 286 6XM8
OT-16 20 410 325 250 1.5 4 270 305 364 6XM8
OT-30 30 470 375 280 1.5 4 312 335 428 6XM8
OT-55 55 600 470 310 2 4 401 365 548 6XM8
OT-75 75 600 470 400 2 4 401 455 548 10XM8
OT-100 98 675 520 450 2.5 5 455 505 625 10XM8
OT-180 160 805 620 500 2.5 5 555 555 755 10XM8

PRE-CUT AND BLANK RESERVOIR LIDS

FILLER
PART NUMBER FRAME FILTER
BREATHER
OTC-12 BLANK
OTC-12-71FR 71 RTF3 FB-1
OTC-12-80/90FR 80 90 FR RTF3 FB-1
OTC-16 BLANK
OTC-16-80/90FR 80 90 FR RTF3 FB-1
OTC-16-100/112FR 100 112 FR RTF3 FB-1
OTC-30 BLANK
OTC-30-80/90FR 80 90 FR RTF3 FB-2
OTC-30-100/112FR 100 112 FR RTF3 FB-2
OTC-55-75 BLANK
OTC-55-75-100/112FR 100 112 FR RTF6&10 FB-2
OTC-55-75-132FR 132 FR RTF6&10 FB-2
OTC-100 BLANK
OTC-180 BLANK

HYDRAULICTANKS&ACCESSORIES 8.7
RESERVOIRSANDLIDS

Aluminum Tanks

NOM. HEIGHT
PART NUMBER LENGTH WIDTH
CAPACITY INC FEET
CP3 3 Liters 220 160 150
CP6 6 Liters 280 200 176
CP10 10 Liters 340 247 220
CP16 16 Liters 368 290 243
CP25 25 Liters 490 340 285
CP55 55 Liters 595 450 345
CP75 75 Liters 595 450 465

Blank Steel Lids

PART NUMBER Description
CCP3 Blank Lid
CCP6 Blank Lid
CCP10 Blank Lid
CCP16 Blank Lid
CCP25 Blank Lid
CCP55 Blank Lid
CCP75 Blank Lid

Gaskets
PART NUMBER Description
GCP3 Gasket to Suit CP3
GCP6 Gasket to Suit CP6
GCP10 Gasket to Suit CP10
GCP16 Gasket to Suit CP16
GCP25 Gasket to Suit CP25
GCP55 Gasket to Suit CP55
GCP75 Gasket to Suit CP75

HYDRAULICTANKS&ACCESSORIES 8.8
SPINONFILTERS

PART NUMBER NOM. FLOW MICRON TYPE PORTS

S05-10 75LPM 10 RETURN 3/4'' BSP
S05-25 85LPM 25 RETURN 3/4'' BSP
S06-10 85LPM 10 RETURN 3/4'' BSP
S06-25 95LPM 25 RETURN 3/4'' BSP
S010-10 160LPM 10 RETURN 11/4'' BSP
S010-25 200LPM 25 RETURN 11/4'' BSP
S015-10 180LPM 10 RETURN 11/4'' BSP
S015-25 220LPM 25 RETURN 11/4'' BSP
S020-10 325LPM 10 RETURN 11/2'' BSP
S030-10 380LPM 10 RETURN 11/2'' BSP

ELEMENTS to suit

PART NUMBER NOM FLOW MICRON TYPE

S0E5-10 75 LPM 10 INLINE
S0E5-25 85 LPM 25 INLINE
S0E5-125 125 INLINE
S0E6-10 85 LPM 10 INLINE
S0E6-25 95 LPM 25 INLINE
S0E10-10 160 LPM 10 INLINE
S0E10-25 200 LPM 25 INLINE
S0E10-125 125 INLINE
S0E15-10 180 LPM 10 INLINE
S0E15-25 220 LPM 25 INLINE
S0ET5-10 60 LPM 10 TANKTOP
SOET10-10 130 LPM 10 TANKTOP
GSOE5-25 85 LPM 25 INLINE
GSOE10-25 200 LPM 25 INLINE

FILTER HEADS

PART NUMBER DESCRIPTION PORTS

S0H-5 S05 & S06 HEAD 3/4'' BSPP
S0H-10 S010 & S015 HEAD 11/4'' BSPP
S0H-20 S020 HEAD 11/2'' BSPP
S0H-30 S030 HEAD 1 1/2” BSPP

HYDRAULICTANKS&ACCESSORIES 8.9
SPINONFILTERS

Filter Head Element A B C D E F G H I L M N O WEIGHT

SO-5 SOH-5 SOE-5 ¾” 95 160 20 38 22 65 M8 0.9
SO-6 SOH-5 SOE-6 ¾” 95 230 20 38 22 65 M8 1
SO-10 SOH-10 SOE-10 1 ¼” 133 210 25 50 30 80 M8 1.9
S0-15 SOH-10 SOE-15 1 ¼” 133 255 25 50 30 80 M8 2.2
SO-20 SOH-20 SOE-10 1 ½” 140 215 25 65 70 80 M10 3.6
S0-25 SOH-20 SOE-15 1 ½” 140 260 25 65 70 80 M10 4
S0-30 SOH-30 SOE-10 1 ½” 130 220 25 60 45 90 150 285 M10 4.7
SO-30F SOH-30 SOE-10 130 220 25 60 45 90 150 285 M10 70 35.7 M12 4.7
SO-35 SOH-30 SOE-15 1 ½” 130 265 25 60 45 90 150 285 M10 70 35.7 M12 5.4
SO-35F SOH-30 SOE-15 130 265 25 60 45 90 150 285 M10 70 35.7 M12 5.4

CLOGGING INDICATORS

PART NUMBER DESCRIPTION MOUNTING TYPE

VCIP/COLOUR PRESSURE 1/8" BSP REAR
VCIV/COLOUR VACUUM 1/8" BSP REAR
EIP ELECTRIC 1/8" BSP REAR

HYDRAULICTANKS&ACCESSORIES 8.10
TANKTOPFILTERS

NOM.
PART NUMBER MICRON TYPE PORTS
FLOW
S0T5-10 75 LPM 10 RETURN ¾” BSP
S0T10-10 130 LPM 10 RETURN 1 ¼” BSP

ELEMENTS
S0ET5-10 75 LPM 10 RETURN
S0ET10-10 130 LPM 10 RETURN

SUCTIONFILTERS

MI-
PART NUMBER TYPE PORTS
CRON
S05-25S 25 SUCTION 3/4'' BSP
S05-125S 125 SUCTION 3/4'' BSP
S010-25S 25 SUCTION 1 1/4'' BSP
S010-125S 125 SUCTION 1 1/4'' BSP

MI-
PART NUMBER TYPE
CRON
S0E5-25 25 SUCTION
S0E5-125 125 SUCTION
S0E10-25 25 SUCTION
S0E10-125 125 SUCTION

PART NUMBER COLOURED TYPE PORT

VCIV/COLOUR GREEN/YELLOW/RED SUCTION 1/8” BSP

HYDRAULICTANKS&ACCESSORIES 8.11
PRESSUREGAUGES(DUALSCALE)

AISI 304 STAINLESS STEEL CASE

63MM DIAMETER GLYCERINE FILLED
BOTTOM ENTRY
PART NUMBER RANGE TYPE
PG63-B-006-B 0-6 BAR 1/4'' BOTTOM ENTRY
PG63-B-010-B 0-10 BAR 1/4'' BOTTOM ENTRY
PG63-B-016-B 0-16 BAR 1/4'' BOTTOM ENTRY
PG63-B-025-B 0-25 BAR 1/4'' BOTTOM ENTRY
PG63-B-040-B 0-40 BAR 1/4'' BOTTOM ENTRY
PG63-B-060-B 0-60 BAR 1/4'' BOTTOM ENTRY
PG63-B-100-B 0-100 BAR 1/4'' BOTTOM ENTRY
PG63-B-160-B 0-160 BAR 1/4'' BOTTOM ENTRY
PG63-B-250-B 0-250 BAR 1/4'' BOTTOM ENTRY
PG63-B-315-B 0-315 BAR 1/4'' BOTTOM ENTRY
PG63-B-400-B 0-400 BAR 1/4'' BOTTOM ENTRY

AISI 304 STAINLESS STEEL CASE

63MM DIAMETER GLYCERINE FILLED
REAR ENTRY WITH PANEL MOUNT CLAMP INCLUDED
PART NUMBER RANGE TYPE
PG63-C-010-B 0-10 BAR 1/4'' REAR WITH CLAMP
PG63-C-016-B 0-16 BAR 1/4'' REAR WITH CLAMP
PG63-C-025-B 0-25 BAR 1/4'' REAR WITH CLAMP
PG63-C-060-B 0-60 BAR 1/4'' REAR WITH CLAMP
PG63-C-100-B 0-100 BAR 1/4'' REAR WITH CLAMP
PG63-C-160-B 0-160 BAR 1/4'' REAR WITH CLAMP
PG63-C-250-B 0-250 BAR 1/4'' REAR WITH CLAMP
PG63-C-315-B 0-315 BAR 1/4'' REAR WITH CLAMP
PG63-C-400-B 0-400 BAR 1/4'' REAR WITH CLAMP

AISI 304 STAINLESS STEEL CASE

100MM DIAMETER GLYCERINE FILLED
BOTTOM ENTRY
PART NUMBER RANGE TYPE
PG100-B-010-B 0-10 BAR 1/2'' REAR WITH CLAMP
PG100-B-016-B 0-16 BAR 1/2'' REAR WITH CLAMP
PG100-B-025-B 0-25 BAR 1/2'' REAR WITH CLAMP
PG100-B-060-B 0-60 BAR 1/2'' REAR WITH CLAMP
PG100-B-100-B 0-100 BAR 1/2'' REAR WITH CLAMP
PG100-B-160-B 0-160 BAR 1/2'' REAR WITH CLAMP
PG100-B-250-B 0-250 BAR 1/2'' REAR WITH CLAMP
PG100-B-315-B 0-315 BAR 1/2'' REAR WITH CLAMP
PG100-B-400-B 0-400 BAR 1/2'' REAR WITH CLAMP

AISI 304 STAINLESS STEEL CASE

100MM DIAMETER GLYCERINE FILLED
FLANGE MOUNT
PART NUMBER RANGE TYPE
PG100-F-010-B 0-10 BAR 1/2'' REAR WITH CLAMP
PG100-F-016-B 0-16 BAR 1/2'' REAR WITH CLAMP
PG100-F-025-B 0-25 BAR 1/2'' REAR WITH CLAMP
PG100-F-060-B 0-60 BAR 1/2'' REAR WITH CLAMP
PG100-F-100-B 0-100 BAR 1/2'' REAR WITH CLAMP
PG100-F-160-B 0-160 BAR 1/2'' REAR WITH CLAMP
PG100-F-250-B 0-250 BAR 1/2'' REAR WITH CLAMP
PG100-F-315-B 0-315 BAR 1/2'' REAR WITH CLAMP
PG100-F-400-B 0-400 BAR 1/2'' REAR WITH CLAMP

HYDRAULICTANKS&ACCESSORIES 8.12
COOLERS

12 and 24 Volt DC
Single and 3 Phase

HYDRAULICTANKS&ACCESSORIES 8.13
HYDRA

Bell Housings and

Couplings
Page
Bell Housings—Metric Frame to Group 05, 1 and 2 Pumps 9.01
Bell Housings—Metric Frame to Group 3 Pumps 9.02
Bell Housings—Metric Frame to SAE A 2 Bolt Pumps 9.03
Bell Housings—Metric Frame to SAE B 2 Bolt Pumps 9.04
Bell Housings—Metric Frame to SAE C 2 & 4 Bolt Pumps 9.05
Bell Housings—Metric Frame to SAE D4 Bolt Pumps 9.06
Bell Housing Gaskets 9.06
Bell Housing Bases and Adaptors 9.07
Bell Housings—Metric Frame to German Style Mount Pumps 9.07
Noiseless Type Bell Housings 9.08
Couplings - 100 Series 9.09
Couplings - 200 Series 9.010
Couplings - 300 Series 9.011
Couplings - 500 Series 9.012
Couplings - 700 Series 9.013
PETROL ENG Bell Housings & Couplings 9.014
BELLHOUSINGS
GROUP05SIZEPUMPS

FRAME
KW @ KW @ PART NUMBER
1440 2900 BELL HOUSING ADAPTOR
D71 0.37 0.55 BH161-02-01 AR1-01

GROUP1SIZEPUMPS

GROUP 1 PUMP - 4 BOLT MOUNT - 25.4 MM SPIG-

KW @ KW @ PART NUMBER
FRAME
1440 2900 BELL HOUSING ADAPTOR
D71 0.37 0.55 BH161-02-01 AR1-02
D80 .55 / .75 .75 / 1.1 BH202-04-02 AR3-02
D90 1.1 / 1.5 1.5 / 2.2 BH202-04-02 AR3-02
D100 2.2 / 3 3 BH252-04-02 AR3-02
D112 4 4 BH252-04-02 AR3-02

Group 2 Size Pumps

GROUP 2 PUMP - 4 BOLT MOUNT - 36.5 MM SPIGOT

FRAME
KW @ KW @ PART NUMBER
1440 2900 BELL HOUSING ADAPTOR
D80 .55 / .75 .75 / 1.1 BH202-04-02 AR3-04
D90 1.1 / 1.5 1.5 / 2.2 BH202-04-02 AR3-04
D100 2.2 / 3 3 BH252-04-02 AR3-04
D112 4 4 BH252-04-02 AR3-04
D132 5.5 / 7.5 7.5 / 11 BH303-06-04 AR3-04
160 11 / 15 15 / 18.5 B350A F24P033-06-04
180 18.5 / 22 22 B350A F24P033-06-04
200 30 B400A F24P033-06-04
225 37 / 45 B450A F24P033-06-04

BELL HOUSING
ELEC MOTOR
ADAPTOR A B C D E F G L M N O P T
FRAM PUMP PART NO
KW RING
E
71 0.27 GRP 05 BH161-02-01 AR1-01 160 130 110 M8 9 14 110 - 66 25.6 M6 22 70
0.37 GRP 1 AR1-02 52.4 72 26.2 M6 25.4
80 0.75 GRP 1 BH202-04-02 AR3-02 200 165 130 M10 11.5 16 136 52.4 72 26.2 M6 25.4 98
GRP 2 AR3-04 71.5 96 32.5 M8 36.5
90 1.1 GRP 1 BH202-04-02 AR3-02 200 165 130 M10 11.5 16 136 52.4 72 26.2 M6 25.4 98
1.5 GRP 2 AR3-04 71.5 96 32.5 M8 36.5
100 2.2 GRP 1 BH252-04-02 AR3-02 250 215 180 M12 13.5 20 182 52.4 72 26.2 M6 25.4 110
112 3, 4 GRP 2 AR3-04 71.5 96 32.5 M8 36.5
132 5.5 GRP 2 BH303-06-04 AR3-04 300 265 230 M12 13.5 20 237 71.5 96 32.5 M8 36.5 139
7.5 GRP 3 AR3-06 98.5 128 42 M10 50.8

BELL HOUSINGS & COUPLINGS

BELLHOUSINGS&COUPLIGS 9.2
GROUP3SIZEPUMPS

KW @ KW @ PART NUMBER
FRAME
1440 2900 BELL HOUSING ADAPTOR
132 5.5 / 7.5 7.5 / 11 BH303-06-04 AR3-06
132 5.5 / 7.5 7.5 / 11 B300A F24P033-06-04
160 11 / 15 15 / 18.5 B350A F24P033-06-04
180 18.5 / 22 22 B350A F24P033-06-04
200 30 B400A F24P033-06-04
225 37 / 45 B450A F24P033-06-04

ELEC MOTOR MODULAR BELL HOUSINGS

4 POLES ELECTRIC MOTOR BASE PUMP PUMP FLANGE
FRAME KW PART NO. A B C D E F G H MTG PART NO. L M N O P S K
5.5 GRP 2 F24P033-06-04 71.5 96 32.5 M8 36.5 33 139
132 7.5 B300A 300 265 230 M12 13.5 20 234 106
9 GRP 3 F24P033-06-04 98.5 128 42 M10 50.8 33 139
11 GRP 2 F24P033-06-04 71.5 96 32.5 M8 36.5 33 169
160 B350A 350 300 250 M16 17.5 30 260 136
15
GRP 3 F24P033-06-04 98.5 128 42 M10 50.8 33 169
18.5 GRP 2 F24P033-06-04 71.5 96 32.5 M8 36.5 33 169
180 B350A 350 300 250 M16 17.5 30 260 136
22
GRP 3 F24P033-06-04 98.5 128 42 M10 50.8 33 169
GRP 2 F24P033-06-04 71.5 96 32.5 M8 36.5 33 173
200 30 B400A 400 350 300 M16 17.5 30 300 140
GRP 3 F24P033-06-04 98.5 128 42 M10 50.8 33 173
37 GRP 2 F24P033-06-04 71.5 96 32.5 M8 36.5 33 203
225 B450A 450 400 350 M16 - 30 350 170
45
GRP 3 F24P033-06-04 98.5 128 42 M10 50.8 33 203

BELLHOUSINGS&COUPLIGS 9.3
BELLHOUSINGS

SAE A 2 BOLT

SAE "A" - 2 BOLT MOUNT PUMPS - 82.55 MM SPIGOT

KW @ KW @ LENGT PART NUMBER

FRAME
1440 2900 H BELL HSG ADAPTOR
D80 .55 / .75 .75 / 1.1 98MM BH202-82A
D80 .55 / .75 .75 / 1.1 127MM BH202-17/080U FR50-082A
D90 1.1 / 1.5 1.5 / 2.2 98MM BH202-82A
D90 1.1 / 1.5 1.5 / 2.2 127MM BH202-17/080U FR50-082A
D100 2.2 / 3 3 110MM BH252-82A
D100 2.2 / 3 3 139MM BH252-17/080U FR50-082A
D112 4 4 110MM BH252-82A
D112 4 4 139MM BH252-17/080U FR50-082A
D132 5.5 / 7.5 7.5 / 11 139MM BH303-82A
D132 5.5 / 7.5 7.5 / 11 152MM B300A F24P046-082A
160 11 / 15 15 / 18.5 182MM B350A F24P046-082A
180 18.5 / 22 22 182MM B350A F24P046-082A
200 30 186MM B400A F24P046-082A
225 37 / 47 216MM B450A F24P046-082A

ADDITIONAL
PUMP N0
ELEC MOTOR BELL HOUSING PUMP A B C D E F G H L O P T S K
MTG HOLES
FLANGE
80 0.55, 0.75 SAE A BH202-082A - 200 165 130 M10 11.5 16 145
106.4 2 M10 82.55 98 - -
90 1.1, 1.5 BH202-17/080U FR50-082A 106.4 2 M10 82.55 98 29 127
100 2.2 BH252-082A - 106.4 2 M10 82.55 110 - -
SAE A 250 215 180 M12 13.5 20 190
112 3, 4 BH252-17/080U FR50-082A 106.4 2 M10 82.55 110 29 139
132 5.5, 7.5, 9 SAE A BH303-082A 300 265 230 M12 13.5 20 234 106.4 2 M10 82.55 110 - -
132 5.5, 7.5, 9 SAE A B300A F24P046-082A 300 265 230 M12 13.5 20 234 106.4 2 M10 82.55 46 152
160,180 11,15, 18.5, 22 SAE A B350A F24P046-082A 350 300 250 M16 17.5 30 260 136 106.4 2 M10 82.55 46 182
200 30 SAE A B400A F24P046-082A 400 350 300 M16 17.5 30 300 140 106.4 2 M10 82.55 46 186
225 37,45 SAE A B450A F24P046-082A 450 400 350 M16 17.5 30 350 170 106.4 2 M10 82.55 46 216

BELLHOUSINGS&COUPLIGS 9.4
BELLHOUSINGS

SAE B 2 BOLT

SAE "B" - 2 BOLT MOUNT PUMPS - 101.6 MM SPIGOT

FRAME KW @ KW @ PART NUMBER
1440 2900 LENGTH BELL HSG ADAPTOR
D80 .55 / .75 .75 / 1.1 127MM BH202-17/080U FR60-101B
D90 1.1 / 1.5 1.5 / 2.2 127MM BH202-17/080U FR60-101B
D100 2.2 / 3 3 139MM BH252-17/080U FR60-101B
D112 4 4 139MM BH252-17/080U FR60-101B
D132 5.5 / 7.5 7.5 / 11 139MM BH303-101B
D132 5.5 / 7.5 7.5 / 11 165MM B300A F24P059-101B
160 11 / 15 15 / 18.5 195MM B350A F24P059-101B
180 18.5 / 22 22 195MM B350A F24P059-101B
200 30 199MM B400A F24P059-101B
225 37 / 45 229MM B450A F24P059-101B

PUMP ADDITIONAL N0
ELEC MOTOR BELL HOUSING A B C D E F G H L O P T S K
MTG PUMP FLANGE HOLES
80 0.55, 0.75 SAE B BH202-17/080U FR60-101B 200 165 130 M10 11.5 16 145 146 2 M12 101.6 98 29 127
90 1.1, 1.5
100 2.2 SAE B BH252-17/080U FR60-101B 250 215 180 M12 13.5 20 182 146 2 M12 101.6 110 29 139
112 3, 4
132 5.5, 7.5 SAE B BH303-101B 300 265 230 M12 13.5 20 234 146 2 M12 101.6 139 - -
9
132 5.5, 7.5 SAE B B300A F24P059-101B 300 265 230 M12 13.5 20 234 146 2 M12 101.6 59 165
9
160 11,15 SAE B B350A F24P059-101B 350 300 250 M16 17.5 30 260 136 146 2 M12 101.6 59 195
180 18.5, 22
200 30 SAE B B400A F24P059-101B 400 350 300 M16 17.5 30 300 140 146 2 M12 101.6 59 199

225 37 SAE B B450A F24P059-101B 450 400 350 M16 17.5 30 350 170 146 2 M12 101.6 59 229
45

BELLHOUSINGS&COUPLIGS 9.5
BELLHOUSINGS

SAE C 2 BOLT

KW@ KW @ PART NUMBER

FRAME
1440 2900 BELL HOUSING ADAPTOR
132 5.5 / 7.5 7.5 / 11 B300A F24P059-127A
160 11 / 15 15 / 18.5 B350A F24P059-127A
180 18.5 / 22 22 B350A F24P059-127A
200 30 B400A F24P059-127A
225 37 / 45 B450A F24P059-127A

SAE C 4 BOLT

KW @ KW @ PART NUMBER
FRAME
1440 2900 BELL HOUSING ADAPTOR
132 5.5 / 7.5 7.5 / 11 B300A F24P059-127C
160 11 / 15 15 / 18.5 B350A F24P059-127C
180 18.5 / 22 22 B350A F24P059-127C
200 30 B400A F24P059-127C
225 37/45 B450A F24P059-127C

SAE C 2 BOLT
PUMP BELL HOUS- ADDITIONAL N0
ELEC MOTOR A B C D E F G H L O P T S K
MTG ING PUMP FLANGE HOLES

132 5.5, 7.5 SAE C B300A F24P059-127A 300 265 230 M12 13.5 20 234 127 2 M16 181.2 59 165
9
160 11,15 SAE C B350A F24P059-127A 350 300 250 M16 17.5 30 260 136 127 2 M16 181.2 59 195
180 18.5, 22
200 30 SAE C B400A F24P059-127A 400 350 300 M16 17.5 30 300 140 127 2 M16 181.2 59 199

225 37 SAE C B450A F24P059-127A 450 400 350 M16 17.5 30 350 170 127 2 M16 181.2 59 229
45

SAE C 4 BOLT
PUMP BELL ADDITIONAL N0
ELEC MOTOR A B C D E F G H L O P T S K
MTG HOUSING PUMP FLANGE HOLES

132 5.5, 7.5 SAE C B300A F24P059-127C 300 265 230 M12 13.5 20 234 127 4 M14 161.5 59 165
9
160 11,15 SAE C B350A F24P059-127C 350 300 250 M16 17.5 30 260 136 127 4 M14 161.5 59 195
180 18.5, 22
200 30 SAE C B400A F24P059-127C 400 350 300 M16 17.5 30 300 140 127 4 M14 161.5 59 199

225 37 SAE C B450A F24P059-127C 450 400 350 M16 17.5 30 350 170 127 4 M14 161.5 59 229
45

BELLHOUSINGS&COUPLIGS 9.6
BELLHOUSINGS

SAE D 4 BOLT PUMPS 152.4mm SPIGOT

KW @ KW @ PART NUMBER
FRAME
1440 2900 BELL HOUSING ADAPTOR
132 5.5 / 7.5 7.5 / 11 B300A F24C124-152G
160 11 / 15 15 / 18.5 B350A F24C124-152G
180 18.5 / 22 22 B350A F24C124-152G
200 30 B400A F24C124-152G
225 37/45 B450A F24C124-152G

PUMP BELL HOUS- ADDITIONAL N0

ELEC MOTOR A B C D E F G H L O P T S K
MTG ING PUMP FLANGE HOLES

132 5.5, 7.5 SAE D B300A F24C124-152G 300 265 230 M12 13.5 20 234 152.4 4 M20 228.6 124 230

160 11,15 SAE D B350A F24C124-152G 350 300 250 M16 17.5 30 260 136 152.4 4 M20 228.6 124 260
180 18.5, 22
200 30 SAE D B400A F24C124-152G 400 350 300 M16 17.5 30 300 140 152.4 4 M20 228.6 124 264

225 37 SAE D B450A F24C124-152G 450 400 350 M16 17.5 30 350 170 152.4 4 M20 228.6 124 294
45

BELLHOUSINGGASKETS

ELEC MOTOR
PART NO A B C D
FRAME
BHG160 71 160 130 111 9
BHG200 80, 90 200 165 146 11
BHG250 100, 112 250 215 191 14
BHG300 132 300 265 235 14
BHG350 160, 180 350 300 261 18

132FrameSinglePieceAluminiumBellHousings

KW @ KW @
FRAME LENGTH
1440 2900 PUMP MOUNT Part Number
SAE A 2 Bolt TH3825A
SAE B 2 Bolt TH3101A
D132 5.5 / 7.5 7.5 / 11 170MM SAE B 4 Bolt TH3101B
SAE C 2 Bolt TH3127A
SAE C 4 Bolt TH3127C

BELLHOUSINGS&COUPLIGS 9.7
BELLHOUSINGS

BASE - Electric Motor Half

PART NUMBER FRAME A B C D E F G H

B300A 132 300 265 230 M12 14 20 234 106
B350A 160/180 350 300 250 M16 18 30 260 136
B400A 200 400 350 300 M16 18 30 300 140
B450A 225 450 400 350 M16 18 30 350 170

ADAPTORS - Pump Half

P
PART NUMBER PUMP FLANGE CODE S
SPIGOT
* FR50-082A SAE A 2 BOLT 082A 29 82.55
* FR60-101B SAE B 2 BOLT 101B 29 101.3
F24P033-06-04 GROUP 2 ITALIAN 33 36.45
F24P033-06-04 GROUP 3 ITALIAN 33 50.75
F24A033-17 BOSCH F SERIES 33 80
F24A033-18 BOSCH G SERIES 33 105
F24P046-082A SAE A 2 BOLT 082A 46 82.55
F24P059-101B SAE B 2 BOLT 101B 59 101.6
F24P059-127A SAE C 2 BOLT 127A 59 127
F24P059-127C SAE C 4 BOLT 127C 59 127
F24C124-152G SAE D 4 BOLT 152G 124 152
* To suit BH***-17/080U Type Bell Housings

BELLHOUSINGSTOSUITGERMANSTYLEPUMPS

KW @ PUMP PART NUMBER

FRAME
1440 TYPE BELL HOUSING ADAPTOR
71 .37 B SERIES BH161-16
80, 90 .55,.75,1.1,1.5 B SERIES BH202-16
80, 90 .55,.75,1.1,1.5 F SERIES BH202-17/080U
110, 112 2.2, 3, 4 F SERIES BH252-17/080U
132 5.5, 7.5 F FERIES BH303-17/080U
132 5.5, 7.5 F SERIES B300A F24A033-17
160, 180 11,15,18.5,22 F SERIES B350A F24A033-17
200 30 F SERIES B400A F24A033-17
225 37,45 F SERIES B450A F24A033-17
132 5.5, 7.5 G SERIES B300A F24A033-18
160, 180 11,15,18.5,22 G SERIES B350A F24A033-18
200 30 G SERIES B400A F24A033-18
225 37,45 G SERIES B450A F24A033-18

BELLHOUSINGS&COUPLIGS 9.8
NOISELESSBELLHOUSINGS

Significant noise reduction compared with all metal bell-housings.

No separate damping flange required.
Complete electrical insulation electric motor/pump
High impact resistance 100 % recyclable.
2 Piece construction

ELECTRIC MOTOR BASE ONLY

ELEC MOTOR BELL HOUSING
A B C D E F G H
FRAME KW PART NO
63 .12, .25 BHP140 140 115 95 8.5 8.5 14 100 46
71 .25, .37 BHP160 160 130 110 8.5 8.5 14 110 53
80 0.75 BHP200 200 165 130 11 11 16 130 73
90 1.1, 1.5 BHP200 200 165 130 11 11 16 130 73
100, 112 2.2, 3, 4 BHP250 250 215 180 13.5 13.5 20 180 85
132 5.5, 7.5 BHP300 300 265 230 13.5 13.5 20 234 106
160 11, 15 BHP350 350 300 250 M16 17.5 30 260 136
180 18.5, 22 BHP350 350 300 250 M16 17.5 30 260 136

EXAMPLEFORORDERING

BHP200 + F10A-04
80 FRAME TO GRP 2 PUMP

PUMP FLANGE ONLY

TO SUIT PUMP FLANGE
BELL HOUSING
PUMP TYPE L M N O P S
BASES PART NO

BHP140 F10A-01 GRP 05 - 66 25.6 M6 22 17

BHP160 F10A-02 GROUP 1 52.4 72 26.2 M6 25.4 17
BHP200 F10B-04 GROUP 2 71.5 96 32.5 M8 36.5 25
BHP250
F10B-082A SAE 2 106.4 - M10 82.55 25
F10E-082M SAE A EXTENDED 106.4 - M10 82.55 54
F24PA033-06-04 GROUP 2 71.5 96 32.5 M8 36.5 33
F24PA033-06-04 GROUP 3 98.5 128 42 M10 50.8 33
BHP300 F24PA046-082A SAE A 106.4 M10 82.55 46
BHP350 F24PA059-101B SAE B 146 M12 101.6 59
F24PA059-127A SAE C 2 BOLT 181.2 M16 127 59
F24PA059-127C SAE C 4 BOLT 161.5 161.5 M14 127 59

BELLHOUSINGS&COUPLIGS 9.9
COUPLINGSPREBORED

100 SERIES Torque Max 20NM

42MM DIA

PART PUMP MOTOR

PREBORED KEYWAY
NUMBER TYPE FRAME
HC101A GROUP 1 1 : 8 TAPER 2.4 MM
HC101D B SERIES 1 : 5 TAPER 2 MM
HC105A GROUP 05 6 MM 2 MM
HC105B GROUP 05 7MM 2 MM
HC1110 D63 11 MM 4
HC112H30 12.7MM ½” 3.17
HC1140 D71 14 MM 5
HC1190 D80 19 MM 6
HC1240 D90 24 MM 8
ER100 INSERT

ELEC MOTOR PART

PUMP TYPE A B C D E F H I L TAPER M N O P
FRAME KW NUMBER
GROUP 05 42 15 6 7 2 28 20 HC105A
GROUP 05 42 15 7 8 2 28 20 HC105B
GROUP 1 42 15 9.8 1:8 10.8 2.4 28 20 HC101A
B SERIES 42 15 9.6 1:5 10.7 2 28 17 HC101D
63 .12, .18 - 42 11 11.8 4 28 23 22 15 HC1110
71 .25, .37 - 42 14 16.3 5 28 30 22 15 HC1140
80 .55, .75 - 42 19 21.8 6 36 50 22 15 HC1190
90 1.1, 1.5 - 42 24 27.3 8 36 50 22 15 HC1240
42 15 12.7 14.3 3.17 28 30 HC112H30

BELLHOUSINGS&COUPLIGS 9.10
COUPLINGSPREBORED

200 SERIES
Torque Max NM
55MM DIA

PART PUMP MOTOR

PREBORED KEYWAY
NUMBER TYPE FRAME
HC201A GROUP 1 1:8 TAPER 2.4 MM
HC201D B SERIES 1:5 TAPER 2 MM
HC202AB GROUP 2 1:8 TAPER 3.2, 4MM
HC2140 D71 14 MM 5 MM
HC2190 D80 19 MM 6 MM
HC2240 D90 24 MM 8 MM
HC2280 100 / 112 28 MM 8 MM
ER200 INSERT

ELEC MOTOR PART NUM-

PUMP TYPE A B C D E F H I L TAPER M N O P
FRAME KW BER
GROUP 1 55 18 9.8 1:8 10.8 2.4 34 25 HC201A
B SERIES 55 18 9.6 1:5 10.7 2 34 23 HC201D
GROUP 2 55 18 17.2 1:8 18.3 3.2,4 36 23 HC202AB
71 .25, .37 - 55 14 16.3 5 36 21 27 18 HC2140
80 .55, .75 - 55 19 21.8 6 38 49 27 18 HC2190
90 1.1, 1.5 - 55 24 27.3 8 46 49 27 18 HC2240
100, 112 2.2, 3, 4 - 55 28 31.3 8 50 61 27 18 HC2280

BELLHOUSINGS&COUPLIGS 9.11
COUPLINGSPREBORED

300 SERIES Torque Max 190 NM

65MM DIA

PART PUMP MOTOR

PREBORED KEYWAY
NUMBER TYPE FRAME
HC301A GROUP 1 1:8 TAPER 2.4 MM
HC302AB GROUP 2 1:8 TAPER 3.2, 4 MM
HC302D F SERIES 1:5 TAPER 3 MM
HC303A GROUP 3 1:8 TAPER 4 MM
HC312H22 1/2" STR KEY 1/2" STR KEY 1/8"
HC3140 D71 14MM 5MM
HC315L22 5/8” STR KEY 5/8” STR KEY 5/32”
HC315M22 5/8" STR KEY 5/8" STR KEY 3/16"
HC3190 D80 19 MM 6 MM
HC319M22 3/4" STR KEY 3/4" STR KEY 3/16"
HC320A35 20MM STR KEY 20MM STR KEY 6MM
HC322A35 22MM STR KEY 22MM STR KEY 6MM
HC322M35 7/8" STR KEY 7/8" STR KEY 3/16"
HC322M45 7/8" STR KEY 7/8" STR KEY 3/16"
HC322N45 7/8" STR KEY 7/8" STR KEY 1/4"
HC3240 D90 24 MM 8 MM
HC325A45 25MM STR KEY 25 MM 8 MM
HC325N45 1" STR KEY 1" STR KEY 1/4"
HC331P45 1 1/4" KEYED 1 1/4" KEYED 5/16"
HC3280 100 / 112 28 MM 8 MM
HC3380 D132 38 MM 10 MM
HCG3SAEA35 SAE A 9T SPLINE 9 T SPLINE
HCG3SAEB35 SAE B 13T SPLINE 13T SPLINE
ER300 INSERT

ELEC MOTOR TA-

PUMP TYPE A B C D E F H I L PER M N O P PART NUMBER
FRAME KW
GROUP 1 65 30 20 9.7 1:8 10.8 2.4 36 26 HC301A
GROUP 2 65 30 20 17.2 1:8 18.3 3.2, 4 36 22 HC302AB
F SERIES 65 30 20 16.9 1:5 18.1 3 36 22 HC302D
GROUP 3 65 30 20 22.1 1:8 23.5 4 46 38 HC303A
65 30 20 12.7 14.3 3.17 36 22 HC312H22
65 30 20 15.87 18.1 4.76 36 22 HC315M22
80 .55, .75 65 19 21.8 6 38 48 30 20 HC3190
65 30 20 19.05 21.3 4.76 36 22 HC319M22
65 30 20 20 22.8 6 46 35 HC320A35
65 30 20 22 24.8 6 46 35 HC322A35
65 30 20 22.22 24.5 4.76 46 35 HC322M35
65 30 20 22.22 24.5 4.76 46 45 HC322M45
65 30 20 22.22 25.2 6.35 46 45 HC322N45
90 1.1, 1.5 65 24 27.3 8 46 48 30 20 HC3240
65 30 20 25 28.3 8 46 45 HC325A45
65 30 20 25.4 28.4 6.35 46 45 HC325N45
65 30 20 31.75 35.4 7.94 46 45 HC331P45
100, 112 2.2, 3, 4 65 28 31.3 8 50 60 30 20 HC3280
132 5.5, 7.5 65 38 41.3 10 64 89 30 20 HC3380

BELLHOUSINGS&COUPLIGS 9.12
COUPLINGSPREBORED

500 SERIES
Torque Max 530 NM
95MM DIA

PART PUMP MOTOR

PREBORED KEYWAY
NUMBER TYPE FRAME
HC502AB GROUP 2 1:8 TAPER 3.2, 4 MM
HC502D F SERIES 1:5 TAPER 3 MM
HC503A GROUP 3 1:8 TAPER 4 MM
HC503D G SERIES 1:5 TAPER 5 MM
HC515L35 5/8" STR KEY 5/8" STR KEY 5/32”
HC515M35 5/8" STR KEY 5/8" STR KEY 3/16"
HC519M35 3/4" STR KEY 3/4" STR KEY 3/16"
HC520A35 20MM STR KEY 20MM STR KEY 6MM
HC522M35 7/8" STR KEY 7/8" STR KEY 3/16"
HC522N35 7/8" STR KEY 7/8" STR KEY 1/4"
HC522N48 7/8" STR KEY 7/8" STR KEY 1/4"
HC525A35 25MM STR KEY 25MM STR KEY 8MM
HC525N48 1" STR KEY 1" STR KEY 1/4"
HC528A48 28 MM 28 MM 8 MM
HC531P48 1 1/4" STR KEY 1 1/4" STR KEY 5/16"
HC532A48 32MM STR KEY 32MM STR KEY 10 MM
HC535A48 35MM 35MM 10 MM
HC545A48 45MM 45MM 14MM
HC5380 132 38 MM 10 MM
HC5420 160 42 MM 12 MM
HC5480 180 48 MM 14 MM
HCG5SAEA50 SAE A 9T 5/8” SPLINED 9T
HCG5SAEB50 SAE B 13T 7/8” SPLINED 13T
HCG5SAEC50 SAE C 14T 1 ¼” SPLINED 14T
ER500 INSERT

ELEC MOTOR TA-

PUMP TYPE A B C D E F H I L PER M N O P PART NUMBER
FRAME KW
GROUP 2 95 46 26 17.2 1:8 18.3 3.2, 4 50 25 HC502AB
F SERIES 95 46 26 16.9 1:5 18.1 3 50 25 HC502D
GROUP 3 95 46 26 22.1 1:8 23.5 4 50 25 HC503A
95 46 26 25.6 1:5 27.7 5 50 25 HC503D
95 46 26 15.87 18.1 4.76 56 35 HC515M35
95 46 26 19.05 21.3 4.76 56 35 HC519M35
95 46 26 20 22.8 6 56 35 HC520A35
95 46 26 22.22 24.5 4.76 56 35 HC522M35
95 46 26 22.22 25.2 6.35 56 35 HC522N35
95 46 26 25 28.3 8 56 35 HC525A35
95 46 26 25.4 28.4 6.35 70 48 HC525N48
95 46 26 28 31.3 8 70 48 HC528A48
95 46 26 31.75 35.4 7.94 70 48 HC531P48
95 46 26 32 35.3 10 70 48 HC532A48
95 46 26 35 38.3 10 70 48 HC535A48
95 46 26 45 48.8 14 70 48 HC545A48
132 5.5, 7.5 95 38 41.3 10 70 80 46 26 HC5380
160 11, 15 95 42 45.3 12 85 110 46 26 HC5420
180 18.5, 22 95 48 51.8 14 85 110 46 26 HC5480

BELLHOUSINGS&COUPLIGS 9.13
COUPLINGSPREBORED

700 SERIES Torque Max 750 NM

120MM DIA

PART PUMP MOTOR

PREBORED KEYWAY
NUMBER TYPE FRAME
HC703A GROUP 3 1:8 TAPER 4 MM
HC703D G SERIES 1:5 TAPER 5 MM
HC722N48 7/8" KEYED 7/8" STR KEYED 1/4"
HC725N48 1" KEYED 1" STR KEYED 1/4"
HC731P48 1 1/4" KEYED 1 1/4" STR KEY 5/16"
HC738R48 1 1/2" KEYED 1 1/2" STR KEY 3/8"
HC745A65 45MM KEYED 45MM STR KEY 14 MM
HC7480 180 48 MM 14 MM
HC7550 200 55 MM 16 MM
HC7600 225 60 MM 18 MM
HCG7SAEB65 SAE B 13T 7/8” SPLINED 13T
HCG7SAEC65 SAE C 14T 1 ¼” SPLINED 14T
ER700 INSERT

ELEC MOTOR
PUMP TYPE A B C D E F H I L TAPER M N O P PART NUMBER
FRAME KW
GROUP 3 120 60 30 22.1 1:8 23.5 4 50 25 HC703A
G SERIES 120 60 30 25.6 1:5 27.7 5 50 25 HC703D
120 60 30 22.22 25.2 6.35 56 35 HC722N35
120 60 30 25.4 28.4 6.35 70 48 HC725N48
120 60 30 31.75 35.4 7.94 70 48 HC731P48
120 60 30 38.1 42.5 9.52 70 48 HC738R48
120 60 30 45 48.8 14 70 48 HC745A48
180 18.5, 22 120 48 51.8 14 85 110 60 30 HC7480
200 120 55 59.3 16 105 110 60 30 HC7550
225 120 60 64.4 18 105 110 60 30 HC7600

BELLHOUSINGS&COUPLIGS 9.14
PetrolEngineBellHousings&Couplings

Petrol Engine Bell Housings

PART NUMBER A B C H Pump Type Power Kw (HP) Engine Spigot
LMH151 110 92 78.5 98 Grp 1 4 Bolt 2.2-4 (3-5.5) Male 41.3mm
LMH401 146 127 110 134 Grp 1 4 Bolt 5-13.5 (7-18) Male 110mm
LMH403 146 127 110 134 Grp 2 4 Bolt 5-13.5 (7-18) Male 110mm

LB152U1P 152 128 146 142 Grp 1 4 Bolt 5-13.5 (7-18) Female 146mm
LB1522 152 128 146 142 Grp 2 4 Bolt 5-13.5 (7-18) Female 146mm
LB15825A 152 128 146 142 SAE A 2 Bolt 5-13.5 (7-18) Female 146mm
LB152101A 152 128 146 142 SAE B 2 Bolt 5-13.5 (7-18) Female 146mm

LB170U1P 170 128 163.5 142 Grp 1 4 Bolt 13.5Kw (18Hp) Female 163.5mm
LB1702 170 128 163.5 142 Grp 2 4 Bolt 13.5Kw (18Hp) Female 163.5mm
LB1703U 170 128 163.5 142 Grp 3 4 Bolt 13.5Kw (18Hp) Female 163.5mm
LB170825A 170 127 163.5 142 SAE A 2 Bolt 13.5Kw (18Hp) Female 163.5mm
LB170101A 170 127 163.5 142 SAE B 2 Bolt 13.5Kw (18Hp) Female 163.5mm

Couplings to Suit
PART NUMBER Pump Shaft To Suit Power Kw (HP) Engine Shaft Ø
Bell Housing
ND48CC22 3/4” Keyed
ND48PU1P Grp 1 Taper LMH151 2.2-4 (3-5.5) 3/4” KEYED
R42 Insert
ND65MC35 1” Keyed
ND65PU1P Grp 1 Taper LMH401 5-13.5 (7-18) 1” KEYED
R62 Insert
ND65MC35 1” Keyed
ND65P2 Grp 2 Taper LB1522 5-13.5 (7-18) 1” KEYED
R62 Insert
ND65MC35 1” Keyed
ND65QD10 5/8” Keyed BHE152-082A 5-13.5 (7-18) 1” KEYED
R62 Insert

BELLHOUSINGS&COUPLINGS 9.14
HYDR

AULICS

Pressure Switches
Page

Low Cost F4 Pressure Switches 10.01

K5 Series Adjustable Pressure Switches 10.02

Cetop Adaptors 10.02

Digital Display 10.03

KL Electronic Pressure Switches 10.04

Electronic Pressure Switches with Relay (Display) 10.05

Pressure Transducers 10.06

Diaphragm Accumulators 10.07

PRESSURESWITCHES

LOW COST

F4 SERIES ADJUSTABLE PRESSURE SWITCH INCLUDING CAP

SWITCHING
MAXIMUM PRES-
PART NUMBER PRESSURE PORT
SURE
RANGE
F4T1/P2 5-50 BAR 200 BAR ¼” BSPP
F4V1/P2 10 – 100 BAR 300 BAR ¼” BSPP
F4Z1/P2 20 – 200 BAR 300 BAR ¼” BSPP
F4Y1/P2 50 – 400 BAR 600 BAR ¼” BSPP

F4 SERIES ADJUSTABLE PRESSURE SWITCH INCLUDING M2 DIN PLUG

SWITCHING
MAXIMUM PRES-
PART NUMBER PRESSURE PORT
SURE
RANGE
F4T1/M2 5-50 BAR 200 BAR ¼” BSPP
F4V1/M2 10 – 100 BAR 300 BAR ¼” BSPP
F4Z1/M2 20 – 200 BAR 300 BAR ¼” BSPP
F4Y1/M2 50 – 400 BAR 600 BAR ¼” BSPP

Technical Features

Body: 24mm hexagonal in tropicalized carbon steel

Assembly: in every position
Working temperature: from -25deg C to +85deg C
Switching frequency: 90 cycles/min
Switching accuracy: +or- 4% of the pressure settled to 20deg C

PRESSURESWITCHES 10.1
PRESSURESWITCHES

SWITCHING PRES- MAXIMUM

PART NUMBER PORT
SURE RANGE PRESSURE
K53 2 – 40 BAR 200 BAR ¼” BSPP

K54 5 – 100 BAR 300 BAR ¼” BSPP

K55 20 – 200 BAR 400 BAR ¼” BSPP

K57 30 – 300 BAR 500 BAR ¼” BSPP

K59 40 – 400 BAR 600 BAR ¼” BSPP

K5 adjustable piston pressure switches activate a micro-switch once a

preset pressure value is reached. The pressure is set by a set screw located on
top of the unit. Mechanical stops protect both the spring and the micro-switch
from over pressurization.

Electric Features:
Technical Features: Electric connection according to DIN 43650
Anodized aluminium body that can be connected to the system Electric protection according to DIN 40050: IP65
with a 1/4" BSP male threaded port or to a CETOP manifold Maximum contact load: up to 250 VAC - 5Amp
without the need of adaptors. up to 110 VDC - 0,25 Amp
Installation: it can be mounted in any position.
Working temperature: from -20°C to + 80°C
Commutation frequency: 120 cycles/min.
Switching accuracy: ± 3% of set pressure
Fixed hysteresis value : about 12% of set value
Weight : 0,35 Kg.

CETOP ADAPTORS

“B6 and B10" CETOP MODULAR MANIFOLD FOR

ATTACHMENT TO ELECTROVALVES CETOP 3 AND 5
With just one manifold it is possible to connect the outlet pressure to
P,A o B. Made in anodized aluminium they can be used for a maximum
working pressure of 350 Bar. They are supplied complete with screws
to fix the pressure switch, and grubs to close the pressure ports not in use
and o-ring.

PART NUMBER CETOP CONNECTED PORTS

B6 CETOP 3 (NG6) A & B OR P
B10 CETOP 5 (NG10) A & B OR P

PRESSURESWITCHES 10.2
PRESSURESWITCHES

DIGITAL DISPLAY
EDV5 Digital display links together with the TR5 and TR6 pressure transducer. It has an adjustable zero and range of adjust-
ment, providing opportunity to display various functions eg Pressure in BARS or PSI, Weight in Kilos or pounds

Technical features
Body: in ABS
Assembly: fixed to panel dimensions 72mm x 36mm
Maximum dimensions: 100 mm of depth
Working temperature: from -20 deg C to +70 deg C
Display: 3 numbers of 13mm
Linearization: 9 control points
Weight: 0.06 Kg

Electric Features:
Power supply: from 19 to 29Volt DC
Output: 17 Volt DC for connection to TR4 or TR5
Electrical connection: according to DIN 43650
Electric protection: according to DIN 40050: IP65
Stocking temperature: from -40 deg C to +90 deg C
Input: No 1

PART NUMBER PRESSURE RANGE DISPLAY RANGE

ED55V 0 - 200 BAR 0 - 999
ED59V 0 - 400 BAR 0 - 999

PRESSURESWITCHES 10.3
PRESSURESWITCHES
WITH ADJUSTABLE DIFFERENTIAL THROUGH FULL ADJUSTMENT RANGE
DIGITAL READ OUT

SWITCHING PRES- MAXIMUM

PART NUMBER
SURE RANGE PRESSURE
KLV59 20 – 400 BAR 600 BAR

KLV5 electronic pressure switches permit the actuation of an electronic micro-switch upon reaching an adjustable preset value
and allows the regulation of the hysteresis value through the full adjustment range.
The display mounted on the instrument permits continuous viewing of the working pressure as a digital gauge and the setting of
pressure values in the programmer.
The maximum and minimum set points are adjustable by two buttons on top of the instrument, protected by a cover.
The instrument is completely solid state. It is totally devoid of electromechanical or dynamic parts.

Technical Features Electric Features

Anodized aluminium body with AISI 316 stainless steel Power supply: 15/30V DC
process fitting. It can be connected to the system with a 12V DC *on request.
1/4" BSP female threaded port or to a manifold (Cetop) Electric connection according to DIN 43650
without need of an adaptor. Electric protection according to DIN 40050 : IP65
Installation : it can be mounted in any position. Maximum contact load : 2 Amp
Working temperature : from -20°C to +80°C Medium consumption : 20mA
Commutation frequency : 200 cycles/min. Involatile memory : EEPROM
Switching accuracy : 1% of set pressure
Adjustable hysteresis value : from 2% and 90% of set
value
Weight : 0,45 Kg.

ELECTRONIC PRESSURE SWITCH

SW
WITH ADJUST ABLE DIIT
FC HR
FE IN
EGNTIAL MAXIMUM
PART NUMBER PRESSURE RANGE PRESSURE
KL55 10 – 200 BAR 500 BAR

KL5 electronic pressure switches permit the actuation of an electronic micro-switch upon reaching an adjustable preset value
and allows the regulation of the hysteresis value. The right hand lever mounted on the instrument that is rotated forward to in-
crease and reverse to decrease controls the maximum set point. The minimum set point of pressure hysteresis is adjusted by
Technical Features
Anodized aluminium body with AISI 316 stainless steel process fitting.
Electric Features
Power supply: 15/30V DC
It can be connected to the system with a 1/4" BSP female threaded port
12V DC *on request.
or to a CETOP manifold without need of adaptors.
Electric connection according to DIN 43650
Installation : in any position.
Electric protection according to DIN 40050: IP65
Working temperature : from -20°C to +80°C
Commutation frequency: 200 cycles/min. Maximun contact load: 2 Amp
Medium consumption: 20mA
Switching accuracy: ± 1% of set pressure
Involatile memory: EEPROM
Adjustable hysteresis value: from 2% to 95% of set value
Weight : 0,38 Kg.

rotating the left hand lever of the instrument.

PRESSURESWITCHES 10.4
PRESSURESWITCHES

ELECTRONIC PRESSURE SWITCH

WITH ADJUSTABLE DIFFERENTIAL

SWITCHING MAXIMUM
PART NUMBER
PRESSURE RANGE PRESSURE
KTR55 10 – 200 BAR 500 BAR

KTR5 electronic pressure switches actuate a relay once a preset pressure value is reached and allow regulation of the hysteresis
value.
Maximum preset pressure is adjusted by operating the right trimmer located on the instrument, by rotating the screw clockwise to
increase and counter-clochwise to decrease.
Minimum preset pressure (hysteresis) is found analogously by operating on the left trimmer of the instrument. The instrument, which
is totally solid state, has the relay adjustment seperate from alimentation.

ELECTRONIC PRESSURE SWITCH

WITH ADJUSTABLE DIFFERENTIAL AND 4 ALARM SETTINGS

DIGITAL READ OUT
PART NUMBER SWITCHING DISPLAY
PRESSURE RANGE INDICATION
KD59-FX 0 – 400 BAR 400 BAR

KD5-FX electronic pressure switches can work together the TR4,TR5 e TR6 transducers, or with other devices with output signals 4-20mA, and
also with the non-amplified transducers of the TD 6 series, which are more economical but which offer the same performance. Suitable for instal-
lation in front mounted panels with a hole diameter of 63 mm.. In addition to indicating pressure value, it permits up to 4 set alarms, in solid state,
with adjustable hysteresis and programmable NO or NC contacts.
The instrument can substitute for four pressure switches with adjustable hysteresis through the full scale range and as a gauge, it can by pro-
grammed in different measurement units and it can display four inputs with differential pressure and four programmable alarms. It is also possible
to select, for example, two different set points, with an NC or NO alarm and a readout of one or more of the other pressures with the added ability to
see the different value between these two and then select another alarm point. In the meantime, the third channel, connected to the temperature
transducer can show the working temperature with relative alarm.

PRESSURESWITCHES 10.5
PRESSURETRANSDUCERS

SWITCHING MAXIMUM
TYPE
PART NUMBER PRESSURE RANGE PRESSURE
TR45/2 0 – 200 BAR 400 BAR 4-20mA
TR45/3 0 - 200 BAR 400 BAR 0-10V
TR49/2 0 - 400 BAR 600 BAR 4-20mA
TR49/3 0 – 400 BAR 600 BAR 0-10V

TR 4 pressure transducers give out a current signal directly proportional to the value of the input pressure to which they are connected.
Standard available signals: 4/20mA or 0-10 Volts
On request : 0-5V / 0-10V / 1-5V / 1-10V / 0-20mA // minimum batches

Technical features: Electric features:

TR4: body in plated carbon steel Electric connection according to Din 43650
TR4/M12: body in plated carbon steel and connector M12x1 Electric connection according to DIN 40050: IP 65
TR4X: body in AISI 316 stainless steel Electronic working temperature: from –20°C to +80°C
TR4X/M12: body in AISI 316 stainless steel and connector M12x1 Stocking temperature: from –35°C to +110°C
It also can be connected by 1/4"BSP male threaded and mounted in any External charge: 100 OHMS
position. Electric connections:
Working temperature: from –25°C to +85°C 4/20mA 2 wires: 1>positive / 2>segnal
Non linearit + hysteresis: <0,5% of F.S. 0-10V 3 wires: 1>supply + / 3>GND / 2>out 0-10V
Zero thermic drift: <2% F.S. from 0 C° to +70° C Power supply:
Weight: 0.1 Kg. For all types: from 15 to 30 VCC

PRESSURE TRANSDUCERS – TR5 SERIES

SWITCHING MAXIMUM
PART NUMBER TYPE
PRESSURE RANGE PRESSURE
TR55/2 0 - 200 BAR 500 BAR 4-20mA
TR55/3 0 - 200 BAR 500 BAR 0-10V

TR59/2 0 - 400 BAR 600 BAR 4-20mA

TR59/3 0 – 400 BAR 600 BAR 0-10V

TR5 pressure transducers give out a current signal directly proportional to the value of the input pressure to which they are connected.
Standards available signals are : 4-20 mA or 0-10Volts

PRESSURESWITCHES 10.6
DiaphragmAccumulators

MAXIMUM
PART NUMBER PORT
PRESSURE
HST-0.1 300 BAR M18X1.5
HST-0.35 300 BAR M18X1.5
HST-0.5 300 BAR M18X1.5
HST-0.7 300 BAR M18X1.5
HST-0.8 300 BAR M18X1.5
HST-1.3 300 BAR M18X1.5
HST-1.5 300 BAR M18X1.5
HST-2.3 300 BAR M18X1.5

Standard Execution:
Body in forged steel, profile turned and tropicalized internally as
well as externally, constructed in two parts and united with a
special threading that under conditions of dynamic pressure
tends to self-block.The diaphragm is suitable for operation with
mineral oils and non aggressive fluids in a temperature range
from -20°C to +80°C.
Installation Position: Can be mounted in any position.

Compression Ratio:
Recommended: P2:P0 = 2,5:1
Maximum P2:P0 = 6:1

PRESSURESWITCHES 10.7
HYDR

AULICS

AC DC Power Units
Page

12 and 24V DC Power Units 11.01

Single and 3 Phase Power Units 11.02

Power Unit Options 11.03

Power Unit Main Block 11.04

Tank Options 11.05

Purpose Built Power Units 11.06

COMPACTPOWERUNITS

12&24VDC

HorizontalStandard Vertical on Request

STEEL
PART NUMBER DESCRIPTION CONTROL VOLTS
TANK SIZE
PPC1612DCSAK26D200G5B PUMP/MOTOR & TANK 12
P and T Ports 5 LITRE
NONE
ROUND
PPC2224DCSAK26D200G5B Includes Relief Valve 24

OPTIONS
PART NUMBER DESCRIPTION TYPE VOLTS
MSV30000+M13040001+18209N Single Acting Control Solenoid 12
MSV30000+M13040002+18209N 24
CM04M0000 Single Acting Control Manual Lever 12 OR 24
E60403010+4WE6D-A-D12 Double Acting Control 2 Pos Cetop 3 12
E60403010+4WE6D-A-D24 & Adaptor 24
E60403010+4WE6G-A-D12 Double Acting Control 3 Pos Cetop 3 12
E60403010+4WE6G-A-D24 & Adaptor 24
E60543006 Foot Mount Bracket
E60543007 Foot Mount H/duty Long

SteelTanks

PART NUMBER CAPACITY MOUNT SHAPE LENGTH WIDTH HEIGHT ØD WEIGHT

E60303004 2.5 Litre Horizontal Round 235mm 130mm 1.05Kg

Vertical
E60303006 5 Litre Horizontal Round 275mm 180mm 1.70Kg
Vertical
E60303011 10 Litre Horizontal Round 262mm 220mm 1.90Kg
Vertical
E60303012 12 Litre Horizontal Round 295mm 240mm 2.40Kg
Vertical
E60303041 8 Litre Vertical Squared 306mm 256mm 133mm 3.75Kg
E60303014 15 Litre Vertical Squared 306mm 256mm 237mm 5.20Kg
E60303015 20 Litre Vertical Squared 350mm 280mm 293mm 8.00Kg
E60303048 30 Litre Vertical Squared 350mm 280mm 423mm 9.40Kg

ACDCPOWERUNITS 11.1
COMPACTPOWERUNITS

ACSingle&3Phase

HorizontalStandard
Vertical on Request
Standard Power Units
240 Volt Single Phase with P & T Ports
STEEL
MAX
PART NUMBER KW FRAME VOLTS FLOW TANK
PRESS
SIZE
1PPC-0.37-AK11D200G5B .37 71FR 240 1.5 LPM 140 BAR 5 LITRE
1PPC-0.55-AK16D200G5B .55 80FR 240 2.3 LPM 140 BAR 5 LITRE
1PPC-0.75-AK21D200G5B .75 80FR 240 3 LPM 140 BAR 5 LITRE
1PPC-1.10-AK32D200G5B 1.1 80FR 240 4.6 LPM 140 BAR 5 LITRE
1PPC-1.50-AK42D200G5B 1.5 90FR 240 6 LPM 140 BAR 5 LITRE
1PPC-2.20-AK49D200G5B 2.2 100FR 240 7 LPM 170 BAR 5 LITRE

Standard Power Units

415 Volt 3 Phase with P & T Ports
STEEL
MAX
PART NUMBER KW FRAME VOLTS FLOW TANK
PRESS
SIZE
3PPC-0.37-AK11D200G5B .37 71FR 415 1.5 LPM 140 BAR 5 LITRE
3PPC-0.55-AK16D200G5B .55 80FR 415 2.3 LPM 140 BAR 5 LITRE
3PPC-0.75-AK21D200G5B .75 80FR 415 3 LPM 140 BAR 5 LITRE
3PPC-1.10-AK32D200G5B 1.1 80FR 415 4.6 LPM 140 BAR 5 LITRE
3PPC-1.50-AK42D200G5B 1.5 90FR 415 6 LPM 140 BAR 5 LITRE
3PPC-2.20-AK49D200G5B 2.2 100FR 415 7 LPM 170 BAR 5 LITRE

ACDCPOWERUNITS 11.2
COMPACTPOWERUNITS

OPTIONS

PART NUMBER DESCRIPTION

M46C1S008 800 W 12VDC Electric Motor
M46C2S008 800 W 24VDC Electric Motor
MB14C2ST40 4KW 24VDC H/Duty E/Motor with Fan
MSV3000000 Normally Closed Cartridge
MSV3100000 Normally Open Cartridge
M13040001 12VDC Coil
M13040002 24VDC Coil
M13040006 110VAC Coil
M13040007 220VAC Coil
18209N Din Plug Connector
CM04M0000 Manual Lever with Microswitch
E701000005 Cavity Plug
VSC01A 1 LPM P/Comp Flow Control Cartridge 1/4” BSP
VSC01B 2 LPM P/Comp Flow Control Cartridge 1/4” BSP
VSC01C 3 LPM P/Comp Flow Control Cartridge 1/4” BSP
VSC040102 1 LPM P/Comp Flow Control Cartridge Oring
VSC040202 2 LPM P/Comp Flow Control Cartridge Oring
VSC040302 3 LPM P/Comp Flow Control Cartridge Oring
E60403001 Cetop 3 Adaptor 3/8” Bspp Rear Ports
E60403010 Cetop 3 Adaptor 3/8” Bspp Side Ports
E60403004 Spacer Manifold
E60403005 90 Degree Rotational Manifold
E60403030 Body to suit MSV Cartridge
F16000001 Plastic Cover 114 DC Motor
PO2.1 4 Metre Cord Set Single Acting
PO2.2 4 Metre Cord Set Double Acting
PMC020000 2cc Cartridge Hand Pump
E60543006 Foot Mount Bracket
E60543007 Foot Mount H/duty Long
C34100001 Suction Filter 3/8” BSP
C34100002 Suction Filter D80
C34100003 Suction Filter D63
C34100005 Suction Filter Square
C34200001 Return Filter
C86100001 Breather 1/2” BSP
C86100001E Filling Plug 1/2” BSP
C86100002 Breather 3/4” BSP
C86200001 Breather 18mm
C86200002 Breather Push On
SPE-P14N Dampener 1/4”BSP Return Line

ACDCPOWERUNITS 11.3
COMPACTPOWERUNITS

ACDCPOWERUNITS 11.4
COMPACTPOWERUNITS

TankOptions

Round

PART NO. DESCRIPTION L Weight PART NO. DESCRIPTION L Weight

E60303001 1.5 Lt Cylindrical 150mm .75Kg E60303006 5 Lt Cylindrical 275mm 1.70Kg

Horizontal / Vertical Mounting Horizontal / Vertical Mounting

E60303004 2.5 Lt Cylindrical 235mm 1.05Kg E60303011 10 Lt Cylindrical 262mm 1.90Kg

Horizontal / Vertical Mounting Horizontal / Vertical Mounting
E60303012 12 Lt Cylindrical 295mm 2.40Kg
Horizontal / Vertical Mounting

Square

PART NO. DESCRIPTION A Weight PART NO. DESCRIPTION A Weight

E60303041 8L Squared 133mm 3.75Kg E60303015 20L Squared 293mm 8.00Kg

Vertical Mount Vertical Mount
E60303014 15Lt Squared 237mm 5.20Kg E60303048 30 Lt Squared 423mm 9.40Kg
Vertical Mount Vertical Mount

ACDCPOWERUNITS 11.5
Standard Industrial Power Units

Power Units

Base Power Units include

3 Phase Electric Motor (240V Single Phase on request)
Powder coated Blue Tank
Laser cut, White Powder coated Lid
Level Gauge & Filler Breather
Bell Housing & Coupling
High Quality Ronzio Gear Pump.
10 Micron Tank top filter with Under tank porting (Easy access Element)
Tank top Relief Block with BSPP P, T and Gauge Ports
Relief Set to 140 Bar
(Easy changeable to Cetop Single or Multi-station Manifold)
Options
Single & Multi-Station Cetop Manifolds Important
Cetop Valves and Modular Valves All Flows, Pressures and Power requirements
Gauges are theoretical only.
Suction Strainers
Based on Kw x 600= Pressure x Flow

Electric motor speed based on 1450RPM

Standard Power Units with Gear Pumps

Ordering Code

PU - 30 - 3 2.2KW - 9 LPM - 140

Single Electric Motor
STD Power Nom Tank Approx Max Flow @ Pressure
or &
Unit Size 3 Phase 140 Bar Setting
Frame Size

0.37Kw (71FR) 1.6 LPM Std =140Bar

12 Litre
.55Kw (80FR) 2.3 LPM
.75Kw (80FR) 3 LPM
16 Litre
1.1 Kw (90FR) 4 LPM
1.5Kw (90FR) 6 LPM
30 Litre
2.2Kw (100FR) 9 LPM
1 PH (240V)
Or 3Kw (100FR) 11 LPM
55 Litre 3 PH (415V) 4 Kw (112FR) 16 LPM
5.5 Kw (132FR) 24 LPM
75 Litre
7.5 Kw (132FR) 29 LPM
11 Kw (160FR) 43 LPM
100 Litre
15 Kw (160FR) 64 LPM
18.5 Kw (180FR) 79 LPM
180 Litre

ACDCPOWERUNITS 11.6
StandardIndustrialPowerUnits

3 Phase 415V

12 Litre Industrial Power Units

Tank Flow Relief
Part Number Phase KW Frame
Size @1450RPM Setting
PU12-3-.37KW-1.6-140 12 Litre Nom 3 PH 0.37Kw 71 1.6 LPM 140 Bar
(2000PSI)
Different Pumps, Flows and Pressure Settings Available

16 Litre Industrial Power Units

Tank Flow Relief
Part Number Phase KW Frame
Size @1450 RPM Setting
PU16-3-.55KW2.3-140 .55 80 2.3 LPM
PU16-3-.75KW-3-140 .75 80 3 LPM
PU16-3-1.1KW-4-140 1.1 90 4 LPM
140 Bar
PU16-3-1.5KW-6-140 16 Litre Nom 3 PH 1.5 90 6 LPM (2000 PSI)
PU16-3-2.2KW-9-140 2.2 100 9 LPM
PU16-3-3KW-11-140 3 100 11 LPM
PU16-3-4KW-16-140 4 112 16 LPM
Different Pumps, Flows and Pressure Settings Available

ACDCPOWERUNITS 11.7
StandardIndustrialPowerUnits

3 Phase 415V

30 Litre Industrial Power Units

Tank Flow Relief
Part Number Phase KW Frame
Size @1450 RPM Setting
PU30-3-.75KW-3-140 .75Kw 80 3 LPM
PU30-3-1.5KW-6-140 1.5Kw 90 6 LPM
140 Bar
PU30-3-2.2KW-9-140 30 Litre Nom 3 Ph 2.2Kw 100 9 LPM (2000 PSI)
PU30-3-3KW-11-140 3Kw 100 11 LPM

PU30-3-4KW-16-140
Different Pumps, Flows4 and
Kw 112
Pressure Settings16Available
LPM

55 Litre Industrial Power Units

Tank Flow Relief
Part Number Phase KW Frame
Size @1450 RPM Setting
PU55-3-3KW-11-140 3Kw 100 11 LPM
PU55-3-4KW-16-140 4 Kw 112 16 LPM 140 Bar
55 Litre Nom 3 Ph
(2000 PSI)
PU55-3-5.5KW-24-140 5.5 Kw 132 24 LPM
PU55-3-7.5KW-29-140 7.5Kw 132 29 LPM
Different Pumps, Flows and Pressure Settings Available

75 Litre Industrial Power Units

Tank Flow Relief
Part Number Phase KW Frame
Size @1450 RPM Setting
PU75-3-3KW-11-140 3Kw 100 11 LPM
PU75-3-4KW-16-140 4 Kw 112 16 LPM 140 Bar
55 Litre Nom 3 Ph
(2000 PSI)
PU75-3-5.5KW-24-140 5.5 Kw 132 24 LPM
PU75-3-7.5KW-29-140 7.5Kw 132 29 LPM
Different Pumps, Flows and Pressure Settings Available

ACDCPOWERUNITS 11.8
3 Phase 415V

100 L Industrial power unit

Tank Flow Relief
Part Number Phase K Frame
Size @1450 RPM Setting
W
PU100-3-5.5KW-24-140 5.5Kw 132 24 LPM 140 Bar

PU100-3-7.5KW-29-140 7.5Kw 132 29 LPM 140 Bar

PU100-3-11KW-44-140 100 Litre Nom 3 Ph 11 160 44 LPM 140 Bar

Kw
PU100-3-15KW-44-200 15 160 44 LPM 200 Bar
Kw
PU100-3-18.5KW-51-200 18.5Kw 180 51 LPM 200 Bar

PU100-3-22KW-66-200 22 180 66 LPM 200 Bar

Different Pumps, Flows and Pressure Settings Available

180 Litre Industrial Power Units

Tank Flow Relief
Part Number Phase KW Frame
Size @1450 RPM Setting
PU180-3-5.5KW-24-140 5.5 132 24 LPM

PU180-3-7.5KW-29-140 7.5 132 29 LPM

PU180-3-11KW-43-140 11 160 43 LPM 140 Bar

180 Litre 3 Ph
(2000 PSI)
PU180-3-15KW-64-140 Nom 15 160 64 LPM

PU180-3-18.5KW-79-140 18.5 180 79 LPM

PU180-3-22KW-92-140 22 180 92 LPM

Different Pumps, Flows and Pressure Settings Available
WHY USE
HYDRAULIC DISTRIBUTORS?
At Hydraulic Distributors we pride ourselves on being at the Top of our field,
when you deal with us, you can rest assured that whether it’s Sales, Service
Design or Engineering, your work is Guaranteed!
When your hydraulics fail and your business stops pumping, we understand that
you need the problem fixed NOW. At Hydraulics Distributors we’ll get your
business back in motion with our:

7 POINT GUARANTEE
1 Australian and International components that last longer save you
time and money, and reduce your running costs
2 On site service available for any job
3 Our design, sales and service team have over 120 years experience.
We’ll get your business back in motion and pumping
4 FREE System design and expert technical advice on all purchases
5 If you need it, we will get it to you. Massive range with over 20,000
components and 2,500 line items in stock
6 Same day and overnight delivery available for all stocked items
7 We deal with our clients in a professional and pleasant manner

ABN 47 108 150 787

Telephone (02) 4721 5544 Facsimile (02) 4721 4709
27 Altair Place, Penrith NSW 2750
Email: sales@hydraulicdistributors.com.au
www.hydraulicdistributors.com.au
CREATED BY EMEDIA DESIGN & PRINT 9698 3900

Topdrive Rineer Specs - RTmotor
No ratings yet
Topdrive Rineer Specs - RTmotor
4 pages
New Standards For Fluidics
No ratings yet
New Standards For Fluidics
29 pages
Valvulas Vickers Tn32
100% (2)
Valvulas Vickers Tn32
40 pages
V10 and V20 Krilne Pumpe
No ratings yet
V10 and V20 Krilne Pumpe
4 pages
Fan Drive-EATON PDF
No ratings yet
Fan Drive-EATON PDF
10 pages
Catridges Valves
100% (1)
Catridges Valves
316 pages
Hydrapac Company Profile HP
100% (1)
Hydrapac Company Profile HP
2 pages
2FRM 5
No ratings yet
2FRM 5
5 pages
Service Manual PGP030/031 Series PGP050/051 Series: Effective: August 2002 Supersedes: June 1989
No ratings yet
Service Manual PGP030/031 Series PGP050/051 Series: Effective: August 2002 Supersedes: June 1989
16 pages
Parker Seal
100% (1)
Parker Seal
2 pages
Fluid Power Automation
No ratings yet
Fluid Power Automation
36 pages
Eaton 03 Hydraulic Fluids
No ratings yet
Eaton 03 Hydraulic Fluids
15 pages
Rotorseal Tech Specs PDF
No ratings yet
Rotorseal Tech Specs PDF
19 pages
PF - PVR Powerflow™ Vane Pumps PDF
No ratings yet
PF - PVR Powerflow™ Vane Pumps PDF
65 pages
Hydraulic Gear Solutions Guide
100% (1)
Hydraulic Gear Solutions Guide
92 pages
Hydraulic Cartridge System - Parker - HY15-3502-US
100% (2)
Hydraulic Cartridge System - Parker - HY15-3502-US
15 pages
2PE - Technical Catalogue PDF
No ratings yet
2PE - Technical Catalogue PDF
38 pages
METAL WORKS General Catalogue
No ratings yet
METAL WORKS General Catalogue
695 pages
PLL - 2149 Cavities PDF
No ratings yet
PLL - 2149 Cavities PDF
35 pages
PGP/PGM600: Service Manual
No ratings yet
PGP/PGM600: Service Manual
20 pages
2PE - Technical Catalogue
No ratings yet
2PE - Technical Catalogue
42 pages
Aluminium Gear Pumps: Technical Catalogue
No ratings yet
Aluminium Gear Pumps: Technical Catalogue
38 pages
Local Solutions For Individual Customers Worldwide: Accumulators & Accessories
No ratings yet
Local Solutions For Individual Customers Worldwide: Accumulators & Accessories
20 pages
Bell Housing Coupling - Uk
No ratings yet
Bell Housing Coupling - Uk
64 pages
Axial Piston Motors: Series Fixed Displacement M24 Design D Goldcup M30 Design A Service Information
100% (2)
Axial Piston Motors: Series Fixed Displacement M24 Design D Goldcup M30 Design A Service Information
24 pages
AHP Catalogue 10 05
No ratings yet
AHP Catalogue 10 05
20 pages
European Accumulator Catalogue 050613 Final Version
100% (3)
European Accumulator Catalogue 050613 Final Version
60 pages
Pressure Relief Valve
No ratings yet
Pressure Relief Valve
24 pages
HPS Pump Manual-Sensor-Inspection - PVWS500
No ratings yet
HPS Pump Manual-Sensor-Inspection - PVWS500
6 pages
Hydraulic Drill Motors Guide
No ratings yet
Hydraulic Drill Motors Guide
12 pages
PGP 500 Series
No ratings yet
PGP 500 Series
32 pages
BP Axialkolbenpumpen Engb Screen
100% (1)
BP Axialkolbenpumpen Engb Screen
48 pages
HY13-1590-010 Motor Catalog
No ratings yet
HY13-1590-010 Motor Catalog
380 pages
Motor Hidráulico
No ratings yet
Motor Hidráulico
48 pages
HY Series Valves
No ratings yet
HY Series Valves
12 pages
Accumulator Block - Hydac - SAF
No ratings yet
Accumulator Block - Hydac - SAF
26 pages
Parker Axial Piston Pump PV016 - PV360
100% (1)
Parker Axial Piston Pump PV016 - PV360
68 pages
Radial Piston Motor Specs
No ratings yet
Radial Piston Motor Specs
24 pages
A - MOBIL - FMC - Construction Machines
No ratings yet
A - MOBIL - FMC - Construction Machines
71 pages
Accumulator Technology Product Catalogue 1000443492 en
100% (2)
Accumulator Technology Product Catalogue 1000443492 en
216 pages
Katalog - Rexroth - Bosch - 2016
No ratings yet
Katalog - Rexroth - Bosch - 2016
76 pages
A - MOBIL - FMC - Agricultural Machines
No ratings yet
A - MOBIL - FMC - Agricultural Machines
73 pages
Hydraulic Gear Pumps and Motors: Edition: 03/02.2012 Replaces: PL 02 T A
No ratings yet
Hydraulic Gear Pumps and Motors: Edition: 03/02.2012 Replaces: PL 02 T A
92 pages
Haldex Load Sensing Gear Pump
No ratings yet
Haldex Load Sensing Gear Pump
10 pages
Eaton Hydraulics 2000 Steve Skinner, Eaton Hydraulics, Havant, UK
No ratings yet
Eaton Hydraulics 2000 Steve Skinner, Eaton Hydraulics, Havant, UK
64 pages
Каталог паркер клапана
No ratings yet
Каталог паркер клапана
659 pages
جرد
No ratings yet
جرد
66 pages
1PF1R4 Ra 11263
No ratings yet
1PF1R4 Ra 11263
8 pages
Hydraulic Pump Specifications Guide
No ratings yet
Hydraulic Pump Specifications Guide
66 pages
Industrial Pump Solutions Guide
No ratings yet
Industrial Pump Solutions Guide
4 pages
AFS Hydraulic Repair Flyer
No ratings yet
AFS Hydraulic Repair Flyer
2 pages
Accumulator Olaer
100% (1)
Accumulator Olaer
60 pages
Vane Pump Prod
100% (1)
Vane Pump Prod
8 pages
17-SP Spreader Valves Catalog
100% (1)
17-SP Spreader Valves Catalog
8 pages
Wheelloader Solutions Brochure-2
No ratings yet
Wheelloader Solutions Brochure-2
1 page
Catalogue Motor Orbitrol
100% (1)
Catalogue Motor Orbitrol
76 pages
Hydraulic Solutions for Industry
No ratings yet
Hydraulic Solutions for Industry
12 pages
HPD Product Range HY28-2673-01 PDF
No ratings yet
HPD Product Range HY28-2673-01 PDF
162 pages
Parker HPD Product Bulletin (HY28-2673-01)
No ratings yet
Parker HPD Product Bulletin (HY28-2673-01)
162 pages
Jameco Part Number 838372: Distributed by
No ratings yet
Jameco Part Number 838372: Distributed by
16 pages
Tamagawa Encoder TS5643 Data - 2p
No ratings yet
Tamagawa Encoder TS5643 Data - 2p
2 pages
XCKL115 Document
No ratings yet
XCKL115 Document
6 pages
SN74LS14N Texas Instruments
No ratings yet
SN74LS14N Texas Instruments
27 pages
Lampiran Harga Camara1 Motor Bantu No.3
No ratings yet
Lampiran Harga Camara1 Motor Bantu No.3
19 pages
Taymac ML500 Brochure
No ratings yet
Taymac ML500 Brochure
3 pages
Wärtsilä Jovytec Pms 2002K / 3002K: Operating Manual
No ratings yet
Wärtsilä Jovytec Pms 2002K / 3002K: Operating Manual
32 pages
1100 Series: 4.4TW2GM
100% (1)
1100 Series: 4.4TW2GM
5 pages
WS L Manual
0% (1)
WS L Manual
8 pages
1100 Series: 4.4TW2GM
No ratings yet
1100 Series: 4.4TW2GM
5 pages
Features Description: Ltc2460/Ltc2462 Ultra-Tiny, 16-Bit Δσ Adcs With 10Ppm/°C Max Precision Reference
No ratings yet
Features Description: Ltc2460/Ltc2462 Ultra-Tiny, 16-Bit Δσ Adcs With 10Ppm/°C Max Precision Reference
22 pages
PS4060 Single Line
No ratings yet
PS4060 Single Line
1 page
Salwico EV-H-CS 84C - M - EN - 2020 - N
No ratings yet
Salwico EV-H-CS 84C - M - EN - 2020 - N
2 pages
Electrical Terminal Board Guide
No ratings yet
Electrical Terminal Board Guide
1 page
400Hz Converter
No ratings yet
400Hz Converter
2 pages
Pricelist ASENWARE Conventional Fire Alarm Control System
No ratings yet
Pricelist ASENWARE Conventional Fire Alarm Control System
4 pages
Chapter-1c-Casting Defects and Remedies PDF
100% (1)
Chapter-1c-Casting Defects and Remedies PDF
71 pages
Muc 38 Brochure-Go-Switch-Atex-Iecex-Junction-Head-Topworx-En-82342
No ratings yet
Muc 38 Brochure-Go-Switch-Atex-Iecex-Junction-Head-Topworx-En-82342
4 pages
Mobile Phone Questionnaire
No ratings yet
Mobile Phone Questionnaire
7 pages
Calculateur Lucas DCU3R Megane Clio Kangoo
83% (6)
Calculateur Lucas DCU3R Megane Clio Kangoo
1 page
QAE Interview Prep Guide
No ratings yet
QAE Interview Prep Guide
3 pages
Evo Online Brochure
100% (1)
Evo Online Brochure
3 pages
Application Notes For AMC Application Adapter For Avaya HDX and Avaya Communication Control Toolkit - Issue 1.0
No ratings yet
Application Notes For AMC Application Adapter For Avaya HDX and Avaya Communication Control Toolkit - Issue 1.0
12 pages
Plant Suppliers
No ratings yet
Plant Suppliers
5 pages
Healthcare Lighting Optimization
No ratings yet
Healthcare Lighting Optimization
31 pages
Internship Program Application Form: Instructions To Applicants
No ratings yet
Internship Program Application Form: Instructions To Applicants
2 pages
Emojipedia
No ratings yet
Emojipedia
5 pages
Executive Summary Organizer
No ratings yet
Executive Summary Organizer
21 pages
Standard Stock and Specials': Bar, Tube and Pipe Cutting
No ratings yet
Standard Stock and Specials': Bar, Tube and Pipe Cutting
13 pages
RAB PKS Kapasitas 45 Tonperjam Ok
100% (1)
RAB PKS Kapasitas 45 Tonperjam Ok
14 pages
TT284 TMA Summer 2014 2015222
0% (1)
TT284 TMA Summer 2014 2015222
3 pages
Sist en Iso 19901 4 2016
No ratings yet
Sist en Iso 19901 4 2016
15 pages
Spare Parts List: Hand-Held Gas Saw DS HS80-14"
No ratings yet
Spare Parts List: Hand-Held Gas Saw DS HS80-14"
20 pages
D7R Tractor Parts Guide
No ratings yet
D7R Tractor Parts Guide
3 pages
Refractory Lining Special Welding Instructions Cajamarquilla 320K
No ratings yet
Refractory Lining Special Welding Instructions Cajamarquilla 320K
4 pages
Hauei Modem Unlocker
No ratings yet
Hauei Modem Unlocker
5 pages
E04 1996
No ratings yet
E04 1996
151 pages
Error Handling & Recovery Scenario
No ratings yet
Error Handling & Recovery Scenario
14 pages
Murphy Controls and Instrumentation Catalogue PDF
67% (3)
Murphy Controls and Instrumentation Catalogue PDF
74 pages
Levee Dance - Violin Solo - Sheet Music Sheet Music Plus
No ratings yet
Levee Dance - Violin Solo - Sheet Music Sheet Music Plus
1 page
Digital Thickness Gauge
No ratings yet
Digital Thickness Gauge
4 pages
ECE 476 Exam 1: Power Systems Analysis
No ratings yet
ECE 476 Exam 1: Power Systems Analysis
7 pages
Automatic Irrigation System
No ratings yet
Automatic Irrigation System
16 pages
CCS108 Week 2 Laboratory Exercise
No ratings yet
CCS108 Week 2 Laboratory Exercise
3 pages
Eecs242 Lect3 Rxarch
No ratings yet
Eecs242 Lect3 Rxarch
34 pages
Crane Lubricants: High-Performance Solutions
No ratings yet
Crane Lubricants: High-Performance Solutions
5 pages