8-Port Antenna R1 R2 Y1 Y2
Frequency Range 698–862 880–960 1695–2690 1427–2690
Dual Polarization X X X X
HPBW 65° 65° 65° 65°
Gain 15.5dBi 16dBi 18dBi 18dBi
Adjust. Electr. DT 2°–12° 2°–12° 2.5°–12° 2.5°–12°
set by
8-Port Antenna 2LB/2HB 2.0m 65° | 698–862 15.5dBi | 880–960 16dBi | 1695–2690 18dBi |
1427–2690 18dBi
Type No. 80011868
Left side, lowbands R1, connector 1– 2 R2, connector 3 –4
698–862 880–960
Frequency Range MHz 698 – 806 791 – 862 880 – 960
Gain at mid Tilt dBi 15.2 15.6 16.0
Gain over all Tilts dBi 15.1 ± 0.5 15.6 ± 0.3 15.8 ± 0.3
Horizontal Pattern:
Azimuth Beamwidth ° 67 ± 3.1 64 ± 2.3 63 ± 3.8
Front-to-Back Ratio, dB > 21 > 24 > 27
Total Power, ± 30°
Vertical Pattern:
Elevation Beamwidth ° 10.6 ± 0.7 9.7 ± 0.5 9.1 ± 0.5
Electrical Downtilt ° 2.0 – 12.0 2.0 – 12.0
continuously adjustable
Tilt Accuracy ° < 0.5 < 0.5 < 0.4
First Upper Side Lobe dB > 16 > 19 > 21
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 16 > 19 > 19
above Main Beam
Cross Polar Isolation dB > 30 > 30
Port to Port Isolation > 28 (R1 // R2) > 28 (R2 // R1)
dB > 30 (R1 // Y1, Y2) > 30 (R2 // Y1, Y2)
Max. Effective Power for W 400 (at 50 °C ambient temperature)
Group of Ports 1+3 // 2 + 4
Max. Effective Power W 800 (at 50 °C ambient temperature)
Ports R1 + R2
Values based on NGMN-P-BASTA (version 9.6) requirements.
936.5556b | ngmn 04.26.01.07 | Subject to alteration.
80011868 Page 1 of 4
KATHREIN SE | Anton-Kathrein-Straße 1–3 | 83022 Rosenheim, Germany | Phone +49 8031 184-0 | www.kathrein.com | mobilcom@kathrein.de
8-Port Antenna
Left side, highband Y1, connector 5 – 6
1695–2690
Frequency Range MHz 1695 – 1880 1850 – 1990 1920 – 2180 2300 – 2400 2490 – 2690
Gain at mid Tilt dBi 17.4 18.0 18.2 17.9 18.2
Gain over all Tilts dBi 17.3 ± 0.5 17.9 ± 0.4 18.1 ± 0.4 17.8 ± 0.4 18.1 ± 0.4
Horizontal Pattern:
Azimuth Beamwidth ° 65 ± 4.1 62 ± 3.4 61 ± 2.6 59 ± 4.4 61 ± 6.2
Front-to-Back Ratio,
dB > 25 > 27 > 25 > 24 > 24
Total Power, ± 30°
Vertical Pattern:
Elevation Beamwidth ° 6.3 ± 0.3 5.8 ± 0.3 5.5 ± 0.4 4.9 ± 0.2 4.4 ± 0.3
Electrical Downtilt
° 2.5 – 12.0
continuously adjustable
Tilt Accuracy ° < 0.3 < 0.3 < 0.3 < 0.3 < 0.3
First Upper Side Lobe
dB > 18 > 17 > 16 > 17 > 16
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 15 > 16 > 15 > 15 > 15
above Main Beam
Cross Polar Isolation dB > 28
Port to Port Isolation dB > 30 (Y1 // R1, R2, Y2)
Max. Effective Power W 200 (at 50 °C ambient temperature)
per Port
Max. Effective Power W 400 (at 50 °C ambient temperature)
Ports Y1
Values based on NGMN-P-BASTA (version 9.6) requirements.
Right side, highband Y2, connector 7– 8
1427–2690
Frequency Range MHz 1427 – 1496 1492 – 1518 1695 – 1880 1850 – 1990 1920 – 2180 2300 – 2400 2490 – 2690
Gain at mid Tilt dBi 16.3 16.5 17.3 17.7 17.9 17.9 18.2
Gain over all Tilts dBi 16.3 ± 0.3 16.5 ± 0.2 17.3 ± 0.3 17.6 ± 0.3 17.9 ± 0.3 17.9 ± 0.4 18.0 ± 0.6
Horizontal Pattern:
Azimuth Beamwidth ° 73 ± 6.0 67 ± 5.1 66 ± 4.8 66 ± 3.4 66 ± 2.8 68 ± 2.9 62 ± 6.0
Front-to-Back Ratio,
dB > 25 > 24 > 26 > 26 > 26 > 27 > 24
Total Power, ± 30°
Vertical Pattern:
Elevation Beamwidth ° 8.6 ± 0.3 8.6 ± 0.2 7.2 ± 0.4 6.7 ± 0.3 6.3 ± 0.5 5.6 ± 0.4 5.1 ± 0.4
936.5556b | ngmn 04.26.01.07 | Subject to alteration.
Electrical Downtilt
° 2.5 – 12.0
continuously adjustable
Tilt Accuracy ° < 0.4 < 0.4 < 0.6 < 0.6 < 0.6 < 0.7 < 0.6
First Upper Side Lobe
dB > 19 > 19 > 19 > 20 > 20 > 16 > 15
Suppression
Upper Side Lobe
Suppression, 20° Sector dB > 15 > 18 > 18 > 19 > 19 > 16 > 15
above Main Beam
Cross Polar Isolation dB > 28
Port to Port Isolation > 28 (Y2 // Y1)
dB > 30 (Y2 // R1, R2, Y1)
> 30 (Y2 // R1, R2)
Max. Effective Power per 150 (at 50 °C ambient 120 (at 50 °C ambient
specified Band and Port W 200 (at 50 °C ambient temperature)
temperature) temperature)
Max. Effective Power W 200 (at 50 °C ambient temperature)
per Port
Max. Effective Power W 400 (at 50 °C ambient temperature)
Ports Y2
Values based on NGMN-P-BASTA (version 9.6) requirements.
Page 2 of 4 80011868
KATHREIN SE | Anton-Kathrein-Straße 1–3 | 83022 Rosenheim, Germany | Phone +49 8031 184-0 | www.kathrein.com | mobilcom@kathrein.de
8-Port Antenna
Electrical specifications, all ports Mechanical specifications
Impedance Ω 50 Input 8 x 4.3-10 female
VSWR < 1.5 Connector Position bottom
Return Loss dB > 14 Adjustment Mechanism FlexRET,
Interband Isolation dB > 28 continuously adjustable
Passive Intermodulation dBc < –153 (2 x 43 dBm carrier) Wind load (at Rated N | lbf Frontal: 905 | 204
Polarization ° +45, –45 Wind Speed: 150 km/h) Maximal: 905 | 204
Max. Effective Power 900 (at 50 °C ambient Max. Wind Velocity km/h 241
W temperature) mph 150
for the Antenna
Values based on NGMN-P-BASTA (version 9.6) requirements. Height / Width / Depth mm 1999 / 378 / 164
inches 78.7 / 14.9 / 6.5
Category of XH (X-Heavy)
Mounting Hardware
Weight kg 36.0 / 41.0 (clamps incl.)
lb 79.3 / 90.3 (clamps incl.)
Packing Size mm 2200 / 383 / 255
inches 86.6 / 15.1 / 10.0
Scope of Supply Panel, FlexRET and clamps
for 55– 115 mm |
2.2 –4.5 inches diameter
Accessories (order separately if required)
Remarks Weight Units per
Type No. Description
mm | inches approx. kg | lb antenna
85010097 2 clamps Mast diameter: 110 – 220 | 4.3 – 8.7 9.4 | 20.7 1
85010099 1 downtilt kit Downtilt angle: 0° – 12° 10.6 | 23.4 1
86010154 Site Sharing Adapter 3-way (see figure below) 0.7 | 1.5
86010155 Site Sharing Adapter 6-way (see figure below) 1.4 | 3.1
86010162 Gender Adapter Solely to be used in combination with 0.045 | 0.099 1
2056 | 80.9
1999 | 78.7
86010163 Port Extender the FlexRET module 86010153V01 0.16 | 0.35 1 1818 | 71.6
Accessories (included in the scope of supply)
85010096 2 clamps Mast diameter: 55 – 115 | 2.2 – 4.5 5.0 | 11.0 1
86010153V01 FlexRET 1
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.
Wall mounting: No additional mounting kit needed.
Material: Reflector screen: Aluminum.
Fiberglass housing: It covers totally the internal antenna components. The special
design reduces the sealing areas to a minimum and guarantees the best weather
936.5556b | ngmn 04.26.01.07 | Subject to alteration.
p rotection. Fiberglass material guarantees optimum p erformance with regards to stabili-
ty, stiffness, UV resistance and painting. The color of the radome is light grey.
All nuts and bolts: Stainless steel or hot-dip galvanized steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are
DC grounded. 1)
Configuration example Configuration example
2)
with Site Sharing Adapter 86010154 with Site Sharing Adapter 86010155
FlexRET FlexRET FlexRET FlexRET FlexRET FlexRET
3)
1) 22 | 0.9
Site Sharing Adapter Site Sharing Adapter 2) 150 | 5.9
3-way 6-way 3) ∅ 11 | 0.4
AISG AISG
All dimensions
BTS1 BTS2 BTS3 in mm | inches
BTS1 BTS2 BTS3 BTS4 BTS5 BTS6
For more information please refer to the respective data sheets.
80011868 Page 3 of 4
KATHREIN SE | Anton-Kathrein-Straße 1–3 | 83022 Rosenheim, Germany | Phone +49 8031 184-0 | www.kathrein.com | mobilcom@kathrein.de
8-Port Antenna
Layout of interface:
164 | 6.5 *
R2 R2
L 4 L 3
229 | 9.0 *
880 - 960 880 - 960
Y1 Y1 R1 R1 Y2 Y2
L 6 L 5 L 2 L 1 R 8 R 7
1695-2690 1695-2690 698 - 862 698 - 862 1427-2690 1427-2690
140 | 5.5
97 | 3.8
131 | 5.2
221 | 8.7
311 | 12.2
378 | 14.9 *
Bottom view
* Dimensions refer to radome
All dimensions in mm | inches
Correlation Table
R2
Frequency range Array Connector / Ports
936.5556b | ngmn 04.26.01.07 | Subject to alteration.
698–862 MHz R1 1– 2
880–960 MHz R2 3–4
1695–2690 MHz Y1 5–6 1x
1427–2690 MHz Y2 7– 8
Y1 Y2
R1
Left Right
Page 4 of 4 80011868 Any previous data sheet issues have now become invalid.
KATHREIN SE | Anton-Kathrein-Straße 1–3 | 83022 Rosenheim, Germany | Phone +49 8031 184-0 | www.kathrein.com | mobilcom@kathrein.de