0% found this document useful (0 votes)
613 views9 pages

Torque Specifications 3778

The document provides torque specifications for engine parts. It lists the location, item, any remarks, and torque value for starter bolts, spark plugs, alternator bolts, engine mount bolts, oil pan bolts and more. Instructions are provided on using power tools and special tools for tightening.

Uploaded by

Olcay Met
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
613 views9 pages

Torque Specifications 3778

The document provides torque specifications for engine parts. It lists the location, item, any remarks, and torque value for starter bolts, spark plugs, alternator bolts, engine mount bolts, oil pan bolts and more. Instructions are provided on using power tools and special tools for tightening.

Uploaded by

Olcay Met
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 9

Torque Specifications

NOTE:
Refer to the appropriate portion of the manual for the precautions and complete procedures.
Refer to the appropriate portion of the manual for the bolts/nuts not indicated here.
- 1: Parts to be tightened in a particular order.
- 2: Follow the appropriate manual procedures closely for torque, sequence, and special steps.

Power tools must be used appropriately.


- Follow instructions and precautions carefully per the tool's manufacturer.
- Do not use power tools for tightening. Only use them during removals of fasteners.

When using some special tools or crowfoot­type wrenches, the torque value changes due to the added leverage. The actual
torque applied will be greater than the torque reading shown.
- The torque specification given is the actual torque, not the reading on the torque wrench.
- To compensate for this additional leverage, use the formula below to calculate the torque value reading on the torque wrench.
- Always use the special tool or crowfoot­type wrench in a straight line with the torque wrench, or you will apply improper torque.

Engine Electrical
Location Item Remark Torque
Starting Starter bolts (10 mm) 45 N·m (4.6 kgf·m, 33
system lbf·ft)
Starter bolt (12 mm) 64 N·m (6.5 kgf·m, 47
lbf·ft)
Positive starter cable nut 9.0 N·m (0.92 kgf·m, 6.6
lbf·ft)
Ignition Spark plugs 22 N·m (2.2 kgf·m, 16
system lbf·ft)
Charging Alternator bolt (8 mm) 22 N·m (2.2 kgf·m, 16
system lbf·ft)
Alternator bolt (10 mm) 45 N·m (4.6 kgf·m, 33
lbf·ft)
Positive alternator cable nut 12 N·m (1.2 kgf·m, 9
lbf·ft)
Drive belt auto­tensioner bolt (8 mm) 22 N·m (2.2 kgf·m, 16
lbf·ft)
Drive belt auto­tensioner bolt (10 mm) 45 N·m (4.6 kgf·m, 33
lbf·ft)
Location Item Remark Torque
Engine Mechanical
Location Item Remark Torque
Engine Engine hanger bolts 22 N·m (2.2 kgf·m, 16
assembly lbf·ft)
Front engine mount bracket bolts Use new bolts 38 N·m (3.9 kgf·m, 28
lbf·ft)
Front engine mount bolt (10 mm) Qty 1 Use new bolt 54 N·m (5.5 kgf·m, 40
lbf·ft)
Front engine mount bolts (10 mm) Qty 4 Use new bolts 38 N·m (3.9 kgf·m, 28
lbf·ft)
Front engine mount stop nuts Use new nuts 74 N·m (7.5 kgf·m, 55
lbf·ft)
Rear engine mount bracket bolts Use new bolts 78 N·m (8.0 kgf·m, 58
lbf·ft)
Rear engine mount bolt Use new bolt 54 N·m (5.5 kgf·m, 40
(10 mm) Qty 1 lbf·ft)
Rear engine mount bolts Use new bolts 38 N·m (3.9 kgf·m, 28
(10 mm) Qty 4 lbf·ft)
Rear engine mount stop nuts Use new nuts 74 N·m (7.5 kgf·m, 55
lbf·ft)
Side engine mount bracket bolts 45 N·m (4.6 kgf·m, 33
(10 mm) Qty 3 lbf·ft)
Side engine mount bracket bolts Use new bolts 44 N·m (4.5 kgf·m, 32
(10 mm) Qty 2 lbf·ft)
Side engine mount bolt (12 mm) Use new bolt 64 N·m (6.5 kgf·m, 47
lbf·ft)
Side engine mount bolts (10 mm) 38 N·m (3.9 kgf·m, 28
lbf·ft)
Transmission mount bolts (10 mm) Qty 3 38 N·m (3.9 kgf·m, 28
lbf·ft)
Transmission mount bolt (10 mm) Qty 1 Use new bolt 54 N·m (5.5 kgf·m, 40
lbf·ft)
Engine block Oil filter base/oil filter assembly bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Engine Rocker arm oil pressure sensor Use new O­ring 22 N·m (2.2 kgf·m, 16
lubrication lbf·ft)
Apply liquid
gasket
Oil pan drain bolt Use new washer 40 N·m (4.1 kgf·m, 30
lbf·ft)
Oil filter 12 N·m (1.2 kgf·m, 9
lbf·ft)
Oil filter feed pipe Use oil on threads 35 N·m (3.6 kgf·m, 26
lbf·ft)
Intake Intake manifold bolts *1 22 N·m (2.2 kgf·m, 16
manifold and lbf·ft)
exhaust Intake manifold nuts *1 22 N·m (2.2 kgf·m, 16
system lbf·ft)
Intake manifold base bolts *1 22 N·m (2.2 kgf·m, 16
lbf·ft)
Intake manifold base nuts *1 22 N·m (2.2 kgf·m, 16
lbf·ft)

Engine Cooling
Location Item Remark Torque
Cooling Water passage bolts 22 N·m (2.2 kgf·m, 16
system lbf·ft)
Water passage nuts 22 N·m (2.2 kgf·m, 16
lbf·ft)

Fuel and Emissions


Location Item Remark Torque
Fuel and Accelerator pedal module 13 N·m (1.3 kgf·m, 10
emissions lbf·ft)
A/F sensor 45 N·m (4.6 kgf·m, 33
lbf·ft)
ECT sensor 1 Use new O­ring 12 N·m (1.2 kgf·m, 9
lbf·ft)
ECT sensor 2 Use new O­ring 12 N·m (1.2 kgf·m, 9
lbf·ft)
EGR pipe A bolts Use new gasket 22 N·m (2.2 kgf·m, 16
lbf·ft)
EGR pipe A nuts Use new gasket 22 N·m (2.2 kgf·m, 16
lbf·ft)
EGR pipe B bolts *2 Use new gaskets 12 N·m (1.2 kgf·m, 9
lbf·ft)
EGR pipe B nuts *2 Use new gasket 12 N·m (1.2 kgf·m, 9
lbf·ft)
EGR valve nuts Use new gasket 22 N·m (2.2 kgf·m, 16
lbf·ft)
High pressure fuel pump mounting bolts *2 25 N·m (2.5 kgf·m, 18
lbf·ft)
Fuel joint pipe nuts *2 36 N·m (3.7 kgf·m, 27
lbf·ft)
Fuel joint pipe bracket mounting bolt *2 22 N·m (2.2 kgf·m, 16
lbf·ft)
Fuel tank locknut *2 Use new locknut and 100 N·m (10.2 kgf·m, 74
O­ring lbf·ft)
Fuel tank support straps bolts 38 N·m (3.9 kgf·m, 28
lbf·ft)
Knock sensor 1 (bank 1) 22 N·m (2.2 kgf·m, 16
lbf·ft)
Knock sensor 2 (bank 2) 22 N·m (2.2 kgf·m, 16
lbf·ft)
Rocker arm oil pressure switch A (bank 1) Use new O­ring 22 N·m (2.2 kgf·m, 16
lbf·ft)
Rocker arm oil pressure switch B (bank1) Use new O­ring 22 N·m (2.2 kgf·m, 16
lbf·ft)
Rocker arm oil pressure switch A (bank 2) Use new O­ring 22 N·m (2.2 kgf·m, 16
lbf·ft)
Secondary HO2S 45 N·m (4.6 kgf·m, 33
lbf·ft)
Throttle body bolts *2 Use new gasket 22 N·m (2.2 kgf·m, 16
lbf·ft)
Under­floor TWC self­ WU­TWC side Use new gaskets and 54 N·m (5.5 kgf·m, 40
locking nuts nuts lbf·ft)
Muffler side Use new gasket and 33 N·m (3.4 kgf·m, 24
nuts lbf·ft)
Front warm up TWC bracket WU­TWC side 45 N·m (4.6 kgf·m, 33
bolts *2 lbf·ft)
Engine side 45 N·m (4.6 kgf·m, 33
lbf·ft)
Rear warm up TWC bracket WU­TWC side 22 N·m (2.2 kgf·m, 16
bolts *2 lbf·ft)
Engine side 22 N·m (2.2 kgf·m, 16
lbf·ft)
Warm up TWC upper Front bank Use new gasket and 32 N·m (3.3 kgf·m, 24
self­locking nuts nuts lbf·ft)
Rear bank Use new gasket and 32 N·m (3.3 kgf·m, 24
nuts lbf·ft)
Location Item Remark Torque
Automatic Transmission
Location Item Remark Torque
Automatic ATF drain plug Use new plug 35 N·m (3.6 kgf·m, 26
transmission lbf·ft)
(9­speed A/T) ATF level plug Use new plug 35 N·m (3.6 kgf·m, 26
lbf·ft)
ATF fill plug Use new plug 35 N·m (3.6 kgf·m, 26
lbf·ft)
TCM bolts 24 N·m (2.4 kgf·m, 18
lbf·ft)
Drive plate bolts *1 74 N·m (7.5 kgf·m, 55
lbf·ft)
Lower transmission assembly mounting bolts 75 N·m (7.6 kgf·m, 55
lbf·ft)
Upper transmission assembly mounting bolts Use new bolts 64 N·m (6.5 kgf·m, 47
lbf·ft)
Transfer assembly mounting bolts 51 N·m (5.2 kgf·m, 38
lbf·ft)
Automatic ATF drain plug Use new sealing 49 N·m (5.0 kgf·m, 36
transmission washer lbf·ft)
(6­speed A/T) ATF fill plug Use new sealing 44 N·m (4.5 kgf·m, 32
washer lbf·ft)
Drive plate bolts *1 74 N·m (7.5 kgf·m, 55
lbf·ft)
Lower transmission assembly mounting bolts 75 N·m (7.6 kgf·m, 55
lbf·ft)
Upper transmission assembly mounting bolts Use new bolts 64 N·m (6.5 kgf·m, 47
lbf·ft)
Transfer assembly mounting bolts 51 N·m (5.2 kgf·m, 38
lbf·ft)
Transfer Transfer fluid drain plug Use new sealing 44 N·m (4.5 kgf·m, 32
assembly washer lbf·ft)
Transfer fluid filler plug Use new sealing 44 N·m (4.5 kgf·m, 32
washer lbf·ft)

Rear Differential
Location Item Remark Torque
Rear Filler plug Use new sealing 47 N·m (4.8 kgf·m, 35
differential washer lbf·ft)
Drain plug Use new sealing 47 N·m (4.8 kgf·m, 35
washer lbf·ft)
Rear differential front mount bolts Use new bolts 49 N·m (5.0 kgf·m, 36
(10 mm) *2 lbf·ft)
Rear differential front mount bolts Use new bolts 69 N·m (7.0 kgf·m, 51
(14 mm) *2 lbf·ft)
Rear differential rear mount bolts *2 Use new bolts 69 N·m (7.0 kgf·m, 51
lbf·ft)

Driveline/Axle
Location Item Remark Torque
Driveline/axle Driveshaft spindle nut (26 mm) Use oil on the 328 N·m (33.4 kgf·m,
seating surface 242 lbf·ft)
Use new nut
Driveshaft spindle nut (24 mm) Use oil on the 245 N·m (25.0 kgf·m,
seating surface 181 lbf·ft)
Use new nut
Driveshaft bearing bracket bolts 39 N·m (4.0 kgf·m, 29
lbf·ft)
Driveshaft support base bolts 39 N·m (4.0 kgf·m, 29
lbf·ft)
Intermediate shaft dowel bolts 39 N·m (4.0 kgf·m, 29
lbf·ft)
Intermediate shaft flange bolt 39 N·m (4.0 kgf·m, 29
lbf·ft)
Heat shield flange bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
No. 1 propeller shaft bolts Use new bolts 32 N·m (3.3 kgf·m, 24
lbf·ft)
No. 2 propeller shaft bolts Use new bolts 32 N·m (3.3 kgf·m, 24
lbf·ft)
Center support bearing bolts Use new bolts 39 N·m (4.0 kgf·m, 29
lbf·ft)
Propeller shaft protector bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)

Steering
Location Item Remark Torque
Steering Steering wheel bolt *2 Use new bolt 49 N·m (5.0 kgf·m, 36
lbf·ft)
Steering joint bolts *2 Use new bolts 45 N·m (4.6 kgf·m, 33
lbf·ft)
Steering column bolts *1 Use new bolts 33 N·m (3.4 kgf·m, 24
lbf·ft)
Steering gearbox bolts *1 Use new bolts 52 N·m (5.3 kgf·m, 38
lbf·ft)
Steering gearbox stiffener bolts *1 44 N·m (4.5 kgf·m, 32
lbf·ft)
Tie­rod end nuts 60 N·m (6.1 kgf·m, 44
lbf·ft)
Tie­rod end locknuts 44 N·m (4.5 kgf·m, 32
lbf·ft)

Suspension
Location Item Remark Torque
Front Wheel nuts 127 N·m (13.0 kgf·m, 94
suspension lbf·ft)
Damper pinch bolt 79 N·m (8.1 kgf·m, 58
lbf·ft)
Castle nut Use new nut 78-88 N·m
(8.0-9.0 kgf·m, 58-65
lbf·ft)
Lower arm bolts Front side Use new bolt 148 N·m (15.1 kgf·m,
109 lbf·ft)
Rear side Use new bolts 88 N·m (9.0 kgf·m, 65
lbf·ft)
Stabilizer bar/Lower arm bolt/nut Use new bolt/nut 88 N·m (9.0 kgf·m, 65
lbf·ft)
Stabilizer link flange nuts Use new nuts 79 N·m (8.1 kgf·m, 58
lbf·ft)
Damper self­locking nut Use new nut 65 N·m (6.6 kgf·m, 48
lbf·ft)
Damper flange nuts Use new nuts 74 N·m (7.5 kgf·m, 55
lbf·ft)
Rear Wheel nuts 127 N·m (13.0 kgf·m, 94
suspension lbf·ft)
Upper arm bolts Use new bolts 137 N·m (14.0 kgf·m,
101 lbf·ft)
Upper arm castle nut Use new nut 69-78 N·m
(7.0-8.0 kgf·m, 51-58
lbf·ft)
Lower arm A bolts Use new bolts 83 N·m (8.5 kgf·m, 61
lbf·ft)
Lower arm B bolts Use new bolts 101 N·m (10.3 kgf·m, 74
lbf·ft)
Control arm self­locking nut Inside Use new nuts 66 N·m (6.7 kgf·m, 49
lbf·ft)
Outside Use new nuts 74 N·m (7.5 kgf·m, 55
lbf·ft)
Stabilizer bar bolts Use new bolts 39 N·m (4.0 kgf·m, 29
lbf·ft)
Stabilizer link flange nut Use new nut 41 N·m (4.2 kgf·m, 30
lbf·ft)
Damper self­locking nut Use new nut 30 N·m (3.1 kgf·m, 22
lbf·ft)
Damper lower bolt Use new bolt 179 N·m (18.3 kgf·m,
132 lbf·ft)
Damper upper bolts Use new bolts 54 N·m (5.5 kgf·m, 40
lbf·ft)

Brakes
Location Item Remark Torque
Conventional Front brake caliper bolts 72 N·m (7.3 kgf·m, 53
brake lbf·ft)
Front brake caliper bracket bolts 137 N·m (14.0 kgf·m,
101 lbf·ft)
Front brake hose banjo bolt Use new washers 35 N·m (3.6 kgf·m, 26
lbf·ft)
Master cylinder nuts 15 N·m (1.5 kgf·m, 11
lbf·ft)
Master cylinder brake line 22 N·m (2.2 kgf·m, 16
lbf·ft)
Rear brake caliper bolts 34 N·m (3.5 kgf·m, 25
lbf·ft)
Rear brake caliper bracket bolts 88 N·m (9.0 kgf·m, 65
lbf·ft)
Rear brake hose banjo bolt Use new washers 35 N·m (3.6 kgf·m, 26
lbf·ft)
Brake pedal bracket bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Brake booster/brake pedal nuts 12 N·m (1.2 kgf·m, 9
lbf·ft)
Parking brake pedal bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Parking brake pedal nuts 22 N·m (2.2 kgf·m, 16
lbf·ft)
VSA VSA modulator­control unit brake line (10 mm) 15 N·m (1.5 kgf·m, 11
lbf·ft)
VSA modulator­control unit brake line (12 mm) 22 N·m (2.2 kgf·m, 16
lbf·ft)

Body
Location
Location Item
Item Remark
Remark Torque
Frame Front subframe bolts *1 Front Use new bolts 103 N·m (10.5 kgf·m, 76
lbf·ft)
Rear Use new bolts 88 N·m (9.0 kgf·m, 65
lbf·ft)
Front subframe stiffener bolts *1 Use new bolts 74 N·m (7.5 kgf·m, 55
lbf·ft)
Front subframe stiffener plate bolts Use new bolts 55 N·m (5.4 kgf·m, 40
lbf·ft)
Rear subframe bolts Use new bolts 132 N·m (13.5 kgf·m, 97
lbf·ft)
Rear subframe stiffener bolts 64 N·m (6.5 kgf·m, 47
lbf·ft)
Rear engine mount base bracket bolts Use new bolts 49 N·m (5.0 kgf·m, 36
lbf·ft)
Rear wheelhouse gusset bolts 36 N·m (3.7 kgf·m, 27
lbf·ft)
Rear wheelhouse gusset nuts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Center Crossmember bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Center Crossmember nuts 9.3 N·m (0.95 kgf·m, 6.9
lbf·ft)
Spare tire hoist bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Front bulkhead brace bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)
Fuel Tank Guard bolts 22 N·m (2.2 kgf·m, 16
lbf·ft)

Heating, Ventilation, and Air Conditioning


Location Item Remark Torque
A/C A/C compressor bolts 22 N·m (2.2 kgf·m, 16
compressor lbf·ft)
A/C compressor center bolt 17 N·m (1.7 kgf·m, 13
lbf·ft)
A/C compressor relief valve Use new O­ring 8.5 N·m (0.87 kgf·m, 6.3
lbf·ft)
Receiver line A/C pressure sensor Use new O­ring 11 N·m (1.1 kgf·m, 8
lbf·ft)

Body Electrical
Location Item Remark Torque
Wipers/washers Windshield wiper arm nut 29 N·m (3.0 kgf·m, 21
lbf·ft)
Windshield wiper linkage nut 22 N·m (2.2 kgf·m, 16
lbf·ft)

You might also like