Concrete Pricelist

Effective: 01st January 2023 to 31st December 2023

Product Concrete Aggregate Concrete Retail Price per
Mix Description Slump
Code Strength Size Class Mᶟ
S10204 10 MPa Structural Mix 10 MPa 20mm 80mm Structural K 765.00
S15204 15 MPa Structural Mix 15 MPa 20mm 80mm Structural K 779.00
S20204 20 MPa Structural Mix 20 MPa 20mm 80mm Structural K 787.00
S25204 25 MPa Structural Mix 25 MPa 20mm 80mm Structural K 809.00
S30204 30 MPa Structural Mix 30 MPa 20mm 80mm Structural K 831.00
S32204 32 MPa Structural Mix 32 MPa 20mm 80mm Structural K 836.00
S35204 35 MPa Structural Mix 35 MPa 20mm 80mm Structural K 853.00
S40204 40 MPa Structural Mix 40 MPa 20mm 80mm Structural K 878.00

S10104 10 MPa Structural Mix 10 MPa a 10mm 80mm Structural K 770.00

S15104 15 MPa Structural Mix 15 MPa 10mm 80mm Structural K 786.00
S20104 20 MPa Structural Mix 20 MPa 10mm 80mm Structural K 798.00
S25104 25 MPa Structural Mix 25 MPa 10mm 80mm Structural K 814.00
S30104 30 MPa Structural Mix 30 MPa 10mm 80mm Structural K 843.00
S32104 32 MPa Structural Mix 32 MPa 10mm 80mm Structural K 847.00
S35104 35 MPa Structural Mix 35 MPa 10mm 80mm Structural K 864.00
S40104 40 MPa Structural Mix 40 MPa 10mm 80mm Structural K 891.00

P20205 20 MPa Pump Mix 20 MPa 20mm 100mm Pump Mix K 792.00
P25205 25 MPa Pump Mix 25 MPa 20mm 100mm Pump Mix K 814.00
P30205 30 MPa Pump Mix 30 MPa 20mm 100mm Pump Mix K 836.00
P32205 32 MPa Pump Mix 32 MPa 20mm 100mm Pump Mix K 841.50
P35205 35 MPa Pump Mix 35 MPa 20mm 100mm Pump Mix K 858.00
P40205 40 MPa Pump Mix 40 MPa 20mm 100mm Pump Mix K 886.00

P20105 20 MPa Pump Mix 20 MPa 10mm 100mm Pump Mix K 803.00
P25105 25 MPa Pump Mix 25 MPa 10mm 100mm Pump Mix K 825.00
P30105 30 MPa Pump Mix 30 MPa 10mm 100mm Pump Mix K 847.00
P32105 32 MPa Pump Mix 32 MPa 10mm 100mm Pump Mix K 853.00
P35105 35 MPa Pump Mix 35 MPa 10mm 100mm Pump Mix K 869.00
P40105 40 MPa Pump Mix 40 MPa 10mm 100mm Pump Mix K 897.00

C1510B0 15 MPa Core Fill Mix 15 MPa 10mm 200mm Core Fill K 803.00
C2010B0 20 MPa Core Fill Mix 20 MPa 10mm 200mm Core Fill K 820.00
C2510B0 25 MPa Core Fill Mix 25 MPa 10mm 200mm Core Fill K 843.00

KM3001 20 MPa Kerb Mix 20 MPa 10mm 10mm Kerb Mix K 811.00
KM3501 25 MPa Kerb Mix 25 MPa 10mm 10mm Kerb Mix K 831.00

MNSSDN Mortar Mix Coarse Sand 100mm Mortar K 754.00

LNSSDN N/A Lean Mix 20mm 80mm Structural K 743.00

The above rates “exclude” 10% GST & are subject to change without prior notice.
*****Subject to Monier’s concrete surcharges & Terms and Condition of quotation and supply*****

Registered office: Saraga Street 6 Mile, PO Box 734, Port Moresby, Papua New Guinea
T. +675 3253344 | +675 7111 1674 | F. +675 3253389 | E. sales@monier.com.pg www.monier.com.pg
 Concrete Additional & Surcharges
Effective: 01st January 2023 to 31st December 2023

Please note the following:

1. All grades are produced to AS: 1379
2. When project control testing is required, testing must be booked at the time of ordering the concrete.
3. A current rate for testing is K 415.00 per test. Test certificate are issued after 28 days.
4. Prices are subject to change without prior notice.

List of Surcharges Product Code Rate

Normal Operating Hours
Monday – Friday – 6:00 to 6:00pm N/A
Outside Hours Surcharge
(As on site times all/ mᶟ (min 3mᶟ)
Monday – Friday 6:00pm to 6:00am K 22.00
Saturday – 2:00pm to 6:00pm AFTERHRS K 6.60
Other Saturday 6:00pm to Monday 6:00am K 33.00
*Saturday to Monday (Sunday)
* Public Holidays are treated as Sunday
Surcharge Bond – Cash Customers Only
Refundable if discharge time is within 30 mins.
If discharge time is more than 30mins the surcharge bond fee
Will be used to offset. Refund will be paid after 3 working days.
Cheque payment must be cleared first before refund cheque issued
All refunds will be paid by cheque.
Surcharge Bond (0.40mᶟ - 19.9mᶟ) WAITSUR1 K 400.00
Surcharge Bond (20mᶟ - 49.9mᶟ) WAITSUR2 K 600.00
Surcharge Bond (50mᶟ - 99.9mᶟ) WAITSUR3 K 800.00
Surcharge Bond (Over 100mᶟ) WAITSUR4 K 1,000.00
Plant Opening Fee
(min. 48 hours notice) OPENFEE K 5,000.00
To open plant outside Mon-Fri normal operation hours
Saturdays after 6pm, Sundays and public hours
Excess Discharge Time (Waiting Time)
Per minute. Charged after 30 minutes discharge time WAIT K 5.50
Distance Charge
Applies to deliveries outside metro area DIST K 4.40
PGK/mᶟ/km (min 3mᶟ load)
Minimum Cartage
Applies to loads less than 3mᶟ regardless of truck type MINLOAD K 55.00
Calculated by the undelivered cubic metres (mᶟ)

Registered office: Saraga Street 6 Mile, PO Box 734, Port Moresby, Papua New Guinea
T. +675 3253344 | +675 7111 1674 | F. +675 3253389 | E. sales@monier.com.pg www.monier.com.pg
 Cement Bag Pricelist
Effective: 01st January 2023 to 31st December 2023

Product Code Product Description Bags per Sling UOM Rates

11011 40 Kg Cement Bag 40 Each K 35.00

11010 Bulk Cement Tanker N/A Tonne K 595.00

Premium Quality Construction 40kg Cement Bags Grade 52.5

The above rates “exclude” 10% GST & are subject to change without prior notice.

Delivery charge K 40.00 per pallet within POM Metro Area. Rates are ex-yard, 6 Mile

Pallet charge K 80.00 per cement pallet will be charged. Pallet charge is refundable on return of pallet/s in good condition.

Cement tanker delivery charge K 40.00/ tonne within POM Metro area

NCD Metropolitan City Limits:

- Baruni Junction
- Bautama Junction
- PAU Junction – 12 Mile
- Laloki Bridge

Delivery outside NCDC Metro Limits:

- Block Truck = K 500.00 per hour – Block truck will offload on site.
- Semi Trailer = K 688.00 – Customer responsible to offload
- Cement Tanker = K 100.00 per tonne

*****Subject to Monier’s Terms and Condition of quotation and supply*****

Registered office: Saraga Street 6 Mile, PO Box 734, Port Moresby, Papua New Guinea
T. +675 3253344 | +675 7111 1674 | F. +675 3253389 | E. sales@monier.com.pg www.monier.com.pg
 MONIER MATERIALS TESTING LABORATORY 2023 PRICELIST
Effective: 01 February to 31 December (Third Party - Project)
All tests are PNGLAS Endorsed
Material Test Method Description Rate
CONCRETE AS METHODS FOR TESTING CONCRETE
1012 3.1 Slump Test K80.00
Air content of freshly mixed concrete (reduction in air pressure
1012 4.2 K215.00
in chamber above concrete
1012 6 Bleeding of concrete K370.00
Making and curing test specimens in the field & laboratory -
1012 8.1 425/hr
technician ( hourly)
Compressive strength of moulded specimens (casted by the
1012 9 K205.00/cyl
lab) cast, cure, cap, crush
Compressive strength of moulded specimens (casted by
K90.00/cyl
customer) cure, cap, crush
1012 11 Determination of the modulus of rupture cast, curing, loaded K300.00/beam
1012 12.1 Mass per unit volume - by measurement K185.00/cyl
Drying Shrinkage of concrete prepared in the field or in the
1012 13 425/hr
laboratory (preparation only - 3pcs) - technician (hourly)
Compressive strength from hardened concrete cores (trim,
1012 14 K250.00/ Core
cap, crush
102 18 Setting time of fresh concrete K915.00
ASTM
C1611/C1611M-14 Slump flow of self-consolidating concrete K110.00
Laboratory Trial Mix
Slump, concrete cylinders, concrete/air temperatures + other
Normal Procedure K1,500/trial
tests if required

AGGREGATES AS METHODS FOR SAMPLING AND TESTING AGGREGATES

1141 4 Bulk density of aggregate K305.00

1141 5 Particle density and water absorption of fine aggregates K345.00
1141 6.1 Particle density and water absorption of coarse aggregates K445.00
1141 11.1 Particle size distribution - Sieving Method (Unwashed) K300.00
Particle size distribution - Sieving Method (Washed) K345.00
1141 12 Materials finer than 75µm in aggregate (by washing) K275.00
1141 14 Particle shape by proportional calliper K305.00
1141 15 Flakiness index K305.00
1141 18 Crushed faces of aggregate particles produced from gravel K275.00
Average least dimension - direct method (nominal 10mm or
1141 20.1 K345.00
greater)
Average least dimension - direct method (nominal 7mm or
1141 20.2 K345.00
5mm)
1141 20.3 Average least dimension - calculation (Nomograph) K235.00
1141 21 Aggregate crushing value K515.00
1141 22 10% Fines (single test) K1,160.00
1141 22 Wet/dry strength variation (duplicate test) K1,980.00
1141 23 Los Angeles value K495.00
Soundness - evaluation by exposure to Sodium Sulphate
1141 24 K890.00
Solution

1141 25.2 Degradation factor - coarse aggregate K785.00

1141 25.3 Degradation factor - fine aggregate K785.00

1141 31 Light particles K345.00
1141 32 Weak particles K345.00
1141 33 Clay and fine silt K170.00
1141 34 Organic impurities other than sugar K205.00

Page 1 of 3
 MONIER MATERIALS TESTING LABORATORY 2023 PRICELIST
Effective: 01 February to 31 December (Third Party - Project)
All tests are PNGLAS Endorsed

Q216 Degree of coating K210.00

METHODS FOR TESTING SOILS FOR ENGINEERING
SOILS AS
PURPOSES
1289 2.1.1 Moisture content - Oven Drying Method K165.00
1289 3.1.1 Liquid limit - 4 point Casag
1289 3.1.2 Liquid limit - 1 point Casag
1289 3.2.1 Plastic Limit K660.00
1289 3.3.1 Plastic Index
1289 3.4.1 Linear Shrinkage K595.00
1289 3.6.1 PSD by sieves (wet) K395.00
MDD/OMC- Standard A-Mould K535.00
1289 5.1.1
MDD/OMC- Standard B-Mould K700.00
MDD/ OMC - Modified (heavy) A-Mould K535.00
1289 5.2.1
MDD/ OMC - Modified (heavy) B-Mould K700.00
CBRs - remoulded Standard K655.00
1289 6.1.1
CBRs - remoulded Modified K760.00
Determination of the penetration resistance of soil - 9kg
1289 6.3.2 K395.00
dynamic cone penetration test
SOILS Q SOILS, CRUSHED ROCK AND STABILISED MATERIALS
Part 4 141A Compaction density of soils & crushed rocks - Nuclear Gauge K200.00
Part 4 141B Compaction density of soils & crushed rocks - Sand Replacement
K300.00
Part 4 143 Treatment of oversize K80.00
Q or
ASPHALT METHODS OF SAMPLING AND TESTING ASPHALT
AS/NZS
Part 7 or
301 or .1 Sampling of asphalt - loose asphalt 425.00/hr
2891
Part 7 302A Dry coring of bound materials 425.00/hr
Part 7 302B Wet coring of bound materials 425.00/hr
Part 7 or
303A or 2.1 Preparation of asphalt core samples 425.00/hr
2891
Part 7 303B Preparation of asphalt mix from core samples 425.00/hr
Part 7 or
305 or 5 Stability, flow, stiffness of asphalt - Marshall K930.00
2891
Part 7 or
306A or 9.1 Compacted density of dense graded asphalt - wax sealed K240.00
2891
Part 7 or
306B or 9.2 Compacted density of dense graded asphalt - presaturation K215.00
2891
Part 7 or
306C or 9.3 Compacted density of dense graded asphalt - silicone sealed K215.00
2891
Part 7 306E Compacted density of asphalt - Nuclear Gauge K200.00
Part 7 or
307A or 7.1 Maximum density of asphalt - water displacement K425.00
2891
Part 7 or
308A or 3.1 Binder content & aggregate grading of asphalt - reflux method K1,640.00
2891
Binder content & aggregate grading of emulsion based on cold
Part 7 308C K1,640.00
mix
Part 7 309 Preparation & testing of asphalt mix 425.00/hr
Part 7 or
311 or 8 Voids properties of compacted asphalt K215.00
2891
Sensitivity of asphalt to water. Applies to principles of
Part 7 315 Austroads Test Methods AG/PT/232 Stripping potential of K2,530.00
asphalt - Tensile strength ratio
Part 11 712 Surface evenness of road surface - rut depth (3m - straightedge)K635.00
AAA MT001 Marshall test properties of asphalt mixes for Airports K930.00
Density ratio of in-place compacted dense graded asphalt
AAA MT002 K215.00
mixes for airports

Page 2 of 3
 MONIER MATERIALS TESTING LABORATORY 2023 PRICELIST
Effective: 01 February to 31 December (Third Party - Project)
All tests are PNGLAS Endorsed
AS/NZS PRECAST CONCRETE PIPES (PRESSURE & NON-PRESSURE
4058 APPENDIX C Load tests for concrete pipes K500.00
CONCRETE
PIPES 4058 APPENDIX F ABSORPTION K440.00

4058 Clause 3.3 Dimensions and tolerances K365.00

METHOD OF TEST - MASONRY UNITS, SEGMENTAL
MASONRY AS/NZS
PAVERS & FLAGS
4456 .3 Determining dimensions K365.00
4456 .4 Masonry units and segmental pavers - compressive strength K130.00/ Block
4456 .5 Masonry units and segmental pavers - breaking load K130.00/ Block
ASTM C140-99b Sampling & testing concrete masonry units & related units K450.00 (3pieces

4766 Clause 7 Dimensions and tolerances K365.00

PLASTIC TANKS
4766 Appendix D Low Temperature Impact Test K400.00
Vehicle (Port Moresby base)
1. Site within 15 km from Monier Lab (return trip) K150
Additional K7.00 /
Site greater than 15 km from Monier Lab
km
2. Site Delays
Waiting time and stand-by time incurred by laboratory staff
during on-site testing will be charged at the sampling rate
above

The above rates "exclude" 10% VAT & are subject to change without prior notice.

Registered Office: Saraga Street, 6 Mile, PO Box 734, Port Moresby, Papua New Guinea
T. +675 3253344 / +675 7111 1674 F. +675 3253389 E. admin@monier.com.pg www.monier.com.pg

Page 3 of 3
 Quarry Material Pricelist
Effective: 01st January 2023 to 31st December 2023

Product Tonnes per Product Description Rates per

Code m³ Tonne
Aggregate Crusher Products

10CA-NB 1.40 10mm Concrete Aggregate K 78.00

20CA-NB 1.50 20mm Concrete Aggregate K 78.00
10SA-NB 1.40 10mm Sealing Aggregate K 88.00
14SA-NB 1.42 14mm Sealing Aggregate K 88.00
20SA-NB 1.44 20mm Sealing Aggregate K 88.00
MSAND-NB 1.69 Manufactured Sand K 78.00
SCALP-NB 1.49 K 38.00
Scalpings
CSANDW-MS 1.58 Wash Coarse Sand K 135.00

BSAND-NB 1.58 Bedding Sand K 45.00

Roadbase

20RB2.1-NB 1.64 20 mm Base Course Type 2.1 CBR ≥80 K 72.00

1.69 K 66.00
40RB3.2-NB 40 mm Base Course Type 3.2 CBR ≥60
120PSB-NB 1.64 120 mm Processed Sub Base K 45.00

20RB2.5-NB 1.69 20mm Base Course Type 2.5 CBR ≥15 K 48.00

1.64 K 45.00
40SCPSB -NB 40mm Processed Sub Base

Other Quarry Products

DIORITE-NB 1.35 Fill Material K 10.00
RIPRAP-NB 1.48 Rip Rap 350 mm - 500 mm P.O.A
RCKSP-NB 1.48 Rock Spalls 150 - 350 mm K 85.00
GBRCK 1.48 Gabion Rock +75mm – 150mm QMRTS03 K 130.00
FLTRCK-NB 1.48 Filter Rock +50mm – 130mm K 70.00

Special Products

10_BMIX-MS 1.77 10mm Builder’s Mix K 102.00

1.76 K 120.00
14_BMIX-MS 14 mm Builder's Mix
1.60 K 138.00
20_BMIX-MS 20 mm Builder's Mix
10 mm CDE Decorative Stone K 225.00

50016 1.40 10 mm CDE Decorative Stone for Exposed Concrete K 110.00

10 mm CDE Decorative Stone in 1.5 t Bulk Bag K 360.00

Product Code Product Description Rate per Bag

50019 10mm CDE Decorative Stone in 40 Kg Bag K 30.00

Rates are Ex-Nebiri Quarry, 11 Mile, Port Moresby

The above rates “exclude” 10% GST & are subject to change without prior notice.
*****Subject to Monier’s Terms and Condition of quotation and supply*****

Registered office: Saraga Street 6 Mile, PO Box 734, Port Moresby, Papua New Guinea

T. +675 3253344 | +675 7111 1674 | F. +675 3253389 | E. sales@monier.com.pg www.monier.com.pg

 Quarry Delivery Charges
Effective: 01st January 2023 to 31st December 2023
Rate Rate
Location Km Location Km
Per Tonne Per Tonne

2 Mile Hill Area 17 K 32.00 Konedobu Area 22 K 42.00

3 Mile Area 16.5 K 31.00 Korobosea Area 17 K 32.00

4 Mile Area 14 K 26.00 Kouderika Area 48 K 94.00

5 Mile Area 11.5 K 21.00 Koukou Village 18.3 K 34.40

6 Mile Area 12 K 22.00 Lealea Village 47 K 92.00

7 Mile Area 13 K 24.00 Laloki Area 8 K 14.00

8 Mile Round About 1 5.7 K 10.72 Mirigeda Area 33 K 64.00

8 Mile Round About 2 7.3 K 13.72 Moitaka Gas Turbine Area 10 K 18.00

9 Mile Area (Bomana) 7 K 12.00 Moitaka Showground Area 7 K 12.00

12 Mile Area (P.A.U. Area) 9 K 16.00 Motukea Area 20.4 K 38.35

14 Mile Area (Ilimo Area) 10 K 18.00 Morata Area 11.5 K 21.62

15 Mile Area 13 K 24.00 Morata Round About 1 8.6 K 16.17

16 Mile Area (Bluff Inn) 14 K 26.00 Murray Barracks Area 16.5 K 31.00

17 & 18 Mile Area 22 K 41.36 Nebiri Area 3 K 4.00

AES Wharf 28 K 52.64 North Waigani 13 K 24.44

Badili & Koki Area 17.5 K 33.00 Papa Lealea Village 40 K 75.20

Bautama Area 29.9 K 56.21 Pari Village Area 21.5 K 41.00

Barakau Area 33 K 68.00 Porebada Junction 25 K 47.00

Baruni / Atlas Junction 17.3 K 32.52 Porebada Village 28 K 52.64

Baruni Dump 15 K 28.20 PNG LNG Gate 1 33 K 62.00

Boroko East Area 15 K 28.00 PNG LNG Gate 2/Papa Lealea Junction 38 K 71.44

Boera Area 31 K 58.28 Port Moresby City Area 20.5 K 39.00

Brown River 22.7 K 43.40 POM General Hospital 16.5 K 31.00

Doa Estate Area 78 K 154.00 Puma Energy Refinery (Napa Napa) 31.9 K 59.97

Duran Farm Junction 6.3 K 11.84 Rainbow Village 12.5 K 23.50

Eda Ranu Sewerage Lagoon 9.6 K 18.05 Rouna 1 & 3 Area 29 K 54.52

Edai Town 29 K 54.52 Rouna 2 Area 33 K 62.00

Edubu Sawmill Area 35 K 68.00 Rouna 4 Area 25 K 47.00

Ensisi Valley Area 15 K 28.20 Sabama & Kaugere Area 18.5 K 35.00

Erima Village Area 7 K 12.00 Sabusa Area 24 K 46.00

Gabutu Area 18 K 34.00 Sogeri National H/S Area 37 K 72.00

Garden Hills Area 16 K 30.00 Sirinumu Dam Area 45 K 88.00

Gerehu Stage 1&2 11.20 K 21.06 Taikone Area 19.5 K 37.00

Gerehu Stage 3&4 12.2 K 22.94 Tahira Boating Area 35 K 68.00

Gerehu Stage 5&6 13.2 K 24.82 Tatana & Baruni Area 27 K 52.00

Gereka Area 26 K 48.88 Taurama Barracks Area 20 K 38.00

Goldie Barracks Area 13 K 24.00 Telikom Earth Station 13 K 24.44

Gordons Industrial Area 13 K 24.00 Tokarara & June Valley Area 17 K 32.00

Gordons Market Area 11 K 20.00 University of PNG Area 14 K 26.32

Gordons – Henao Drive Area 13 K 24.00 Vanapa Area 42.4 K 82.80

Hanuabada Area 14 K 26.00 Veumauri Area 56 K 110.00

Hohola Area 16 K 30.00 Waigani Area 15 K 28.00

Holiday Inn – Islander Village Area 13 K 24.00

Idubada Area (Baruni / Atlas) 18.8 K 35.34

Kanudi 19.3 K 36.28

The above rates “exclude” 10% GST & are subject to change without prior notice
Minimum Delivery is 1.5 tonne. All deliveries less than 3 tonnes are charged at 3 tonnes.
**** Subject to Monier’s Terms and Condition of quotation and supply ***

Registered office: Saraga Street 6 Mile, PO Box 734, Port Moresby, Papua New Guinea
T. +675 3253344 | +675 7111 1674 | F. +675 3253389 | E. sales@monier.com.pg www.monier.com.pg
 Masonry Product Pricelist
Effective: 01st January 2023 to 31st December 2023
Pcs/ Retail Price
Series Description MTO/ STK
Pallet Each
100mm (4 Inch Blocks)

10.01 144 100mm – Standard STK K 5.20

10.02 192 100mm – Three Quarter STK K 4.30
10.03 288 100mm – Half STK K 2.85
10.04 576 100mm – Quarter STK K 2.00
10.31 144 100mm – Solid MTO K 6.30
10.01A 144 100mm – Live Stock Block – (Piggery Grate) MTO K 5.20

150mm (6 Inch) Blocks

15.01 120 150mm - Standard STK K 6.30

15.02 160 150mm – Three Quarter STK K 5.20
15.03 240 150mm – Half STK K 4.10
15.04 280 150mm – Quarter STK K 3.00
15.20 120 150mm – Knock Out STK K 6.50
15.42 120 150mm – Channel STK K 5.95
15.148 105 150mm – Split Rib MTO K 7.50

200mm (8 Inch) Blocks

20.01 90 200mm – Standard STK K 7.50
20.02 120 200mm – Three Quarter STK K 7.05
20.03 180 200mm – Half STK K 4.30
20.12 90 200mm – Bond Beam STK K 9.25
20.18 90 200mm – Deep Lintel STK K 7.25
20.20 90 200mm – Knock Out STK K 7.90
20.20R 90 200mm – Bisket Less Knock Out MTO K 7.60
20.37 128 200mm – Full Height Sill STK K 5.40
20.38 160 200mm – Half Height Sill STK K 4.10
20.42 90 200mm – Channel STK K 7.60
20.45 90 200mm – Clean Out STK K 7.50
20.47 90 200mm – Clean Out (Knock Out) STK K 7.60
20.48 90 200mm – H Block STK K 7.75
20.71 180 200mm –Standard (Half Height) STK K 7.05
20.739 105 Squint (45 Degree) STK K 7.25
20.925 90 200mm – Hollow STK K 7.30
50.45 252 Inspection Cap MTO K 2.78

300mm (10 Inch) Block

30.01 60 300mm – Block – Standard STK K 10.50

30.02 80 300mm – Square / Cube STK K 8.80
30.42 60 300mm - Channel STK K 10.50

Registered Office: Saraga Street, 6 Mile, PO Box 734, Port Moresby, Papua New Guinea

T. +675 3253344 / +675 7111 1674 F. +675 3253389 E. admin@monier.com.pg www.monier.com.pg

Interlocking Paver 80mm (IP80) 220mm x 110mm x 80mm

40 pieces/ m² Note: 1 pallet of IP80 pavers = 10m²

IP80G 400 80mm Inter-locking Pave - Grey STK K 6.40
IP80B 400 80mm Inter-locking Pave – Black MTO K 7.00
IP80R 400 80mm Inter-locking Pave - Red MTO K 7.00
IP80T 400 80mm Inter-locking Pave – Terracotta MTO K 7.00
IP80Y 400 80mm Inter-locking Pave - Yellow MTO K 7.00
Square Pavers 150mm x 150mm x 80mm
44.5 pieces/ m² Note: 1 pallet of p150 pavers = 8.8 m²
P150G 392 150mm Square Pavers – Grey STK K 6.66
P150B 392 150mm Square Pavers – Black MTO K 6.90
P150R 392 150mm Square Pavers – Red MTO K 6.90
P150T 392 150mm Square Pavers – Terracotta MTO K 6.90
P150Y 392 150mm Square Pavers – Yellow MTO K 6.90
Square Pavers 400mm x 400mm x 60mm
6.25 pieces/ m² Note: 1 pallet of p400 pavers = 11.52 m²
P400G 72 400mm Square Pavers – Grey STK K 10.00
P400B 72 400mm Square Pavers – Black MTO K 11.50
P400R 72 400mm Square Pavers – Red MTO K 11.50
P400T 72 400mm Square Pavers – Terracotta MTO K 11.50
P400Y 72 400mm Square Pavers – Yellow MTO K 11.50
Grass Pavers 400mm x 400mm x 80mm
6.25 pieces/ m² Note: 1 pallet of Grass pavers = 14.40 m²
30.718 72 400mm Grass Pavers MTO K 15.00

The above rates “exclude” 10% GST & are subject to change without prior notice.

Delivery charge K 40.00 per pallet within POM Metro area. Rates are ex-yard

Pallet charge K 90.00 per pallet will be charged. Pallet charge is refundable on return of pallet/s in good condition.

NCD Metropolitan City Limits:

- Baruni Junction
- Bautama Junction
- PAU Junction – 12 Mile
- Laloki Bridge

Delivery outside NCDC Metro City Limits

- Block truck = K 500.00 per hour – Block truck has offloading facilities to offload on site.
- Semi Trailer = K 688.00 per hour – Customer responsible to offload

*** Subject to Monier’s Terms and Condition of quotation and supply ***

2
Masonry Blocks
MASONRY and Pavers
BLOCKS AND PAVERS
100 SERIES BLOCKS 150 SERIES BLOCKS 200 SERIES BLOCKS 300 SERIES BLOCKS

190 190
190 190 190

390 390 390 390 390

190 290
90 140 190
10.01–Standard 15.01–Standard 20.01 – Standard 20.42 – Channel 30.01 – Standard
390

190 190 190 190

190
290 290 290 290
90 140 190
190 290
10.02-Three quarter 15.02–Three quarter 20.02 – Three quarter 20.45 – Cleanout 30.02 – Square/Cube

190 190
190 190 190

190 190 190 390

90 140 190
390
190 290
10.03–Half 15.03–Half 20.03 – Half 20.47 – Cleanout 30.42 – Channel
(knockout)

190
90 190
190
90
90
390
PAVERS
140 90 390
190 190

10.04–Quarter 15.04–Quarter 20.12 – Bondbeam 20.48 – H Block 400

80
190
190 90
390
400
390
30.718 – Grass Paver
390 390
90 140 190 190 190

10.31–Solid 15.20–Knockout 20.18 – Deep lintel 20.71 – Standard

(Half-height)
80

190 112
110 220
225
190 190
90
IP80 – Interlocking
390 390 390
140 190 190

15.42–Channel 20.20 – Knockout 20.925 – Hollow

80

390 150 150

190
165
P150 – Paver
190

190 240

140 20.37- Full Height Sill 190 350 60

15.148 – Split Rib 20.739 – Squint 400 400

(45 degree) P400 – Paver
100

250
190
20.38- Half Height Sill
Monier
MONIERInterlocking Paving
INTERLOCKING System
PAVING SYSTEM
LAYING GUIDE AND HINTS
SPECIAL NOTE: LAYING THE PAVE UNITS
This is a do-it yourself or home handyman guide and refers to small The actual laying of Monier -pave is the real fun part of
jobs such as footpaths, patios, driveways etc… which may be undertak- the job but take note of these DO’s and DON’Ts: -
en around home.
• Do lay from the most convenient corner.
INTRODUCTION • Don’t – in fact, never lay in a downhill direction.
There are three layers in a laying Monier pavement for domestic uses. • Do lay in each unit loosely 2-3mm from its neighbour;
the thickness of a match stick is a good way of spacing
1) The sub-base – the existing ground the units.
prepared, compacted and generally • Do store the units in stacks for ease of laying about 10
levelled: to each stack – along the laying face.
2) The laying course – a bedding of • Do leave the cutting and placing of edge units as the last
carefully screeded sand, about 50mm 3 step of the laying process.
(2inches) deep:
3) The surface course – The interlocking 2
pave units themselves. 1 PAVING PLACED
VERTICALLY PAVING PAVING

In addition, edge restraint is recommended for vehicle traffic areas to 1 2

prevent the units moving sideways and becoming loose or being
undermined by rain. BACKFILL SCREEDING SAND MASONRY UNITS SCREEDING SAND

150mmx25mm
PAVING SOIL OVER TO
The following steps are for both 80mm interlocking pave units. TIMBER EDGING
PAVING EDGE PAVING

3
BORDER RESTRAINTS 4
All segmental concrete pavements require fixed borders to prevent STAKES AT 1m SCREEDING SAND
SCREEDING SAND
movement of edge units and these should be constructed prior to INTERVALS

making the sand bedding. The following diagrams illustrate some SETTING THE PATTERNS
successful border restraints. Interlocking paves can be laid in three patterns all though herringbone
is the most often followed. Some suggestions.
1. Interlocking pave units, bricks or cobblestones
laid vertically create a useful and decorative border.
2. Monier masonry blocks provide a functional border.
3. Treated wooden borders are both functional and
decorative but they need to be supported by stakes driven STRETCHER
into the ground at about 1- meter intervals, minimum Rows of units in this pattern should point across the direction of travel.
150 x 25mm.
4. Soil may be placed and compacted along the edge of
the finished pavement and grass grown to the pavement
edge..
5. Concrete kerbing, concrete side channels or other precast
units available from Monier.

1,2 and 5 are particularly recommended for driveways. HERRINGBONE

Commence at a corner. The units can be laid horizontally in rows or
LAYING AND SCREEDING THE SAND BEDDING parallel to the initial or outer edge.
A river or sand free of pebbles is recommended and it should be moist
when laid. Not dry, not wet but moist. Suitable sand can be ordered
from Monier Sales office.
The sand depth should not exceed 50mm BEFORE COMPACTION and PARQUETRY
this goes for both 80mm and 60mm pave unit. For a first – class job This pattern is suggested for its decorations and colour variation.
take note of these “Tricks of the Trade” –
STAMPING THE PAVEMENT:
• Screen the sand loosely and do not repeat,
do not disturb it prior to laying the pave units. Tamping is necessary to seat the units to a levelled surface.
• Screen up to 3 meters in front of the last row
of units laid. If you screed too much ahead you Smaller jobs of, say, 25 square meters or less can be easily and efficiently
will probably have to walk on it. tamped with a rubber mallet.

If you can’t get hold of a rubber mallet, trying tamping a hammer on a

piece of softwood around 100mm x 50mm x 450mm.

For larger projects a mechanical vibrator is suggested. Most hire firms

carry them. Dry sand is swept into the joints with a final pass of the
vibrator or simply hosed into the joints on smaller jobs. It is good
practice to vibrate and fill the gaps with sand at the end of each laying
day. Rain overnight has been known to undo all the good work of the
day.

Technical Services:
TECHNICAL SERVICES:
For additional information, please contact Monier Technical Department.
For additional information, please contact Monier Technical Department.
3344675
Phone:
Phone: 675 325 325
/ 675 3344
7111 / 675
1674 71117200
/ 675 1674 /0674
675 7200 0674
| Fax: 3389 sales@monier.com.pg
325| Email: | Email: sales@monier.com.pg |
www.monier.com.pg
Web: www.monier.com.pg

JAS-ANZ
APPROVED APPROVED APPROVED
COMPANY COMPANY COMPANY
ISO 9001 ISO 14001 ISO 45001
Quality Management Environmental Occupational Health &
Systems Management Safety Management
Systems Systems

Certification Services Certification Services Certification Services

SUGGESTED SPECIFICATIONS FOR MONIER MASONRY

GENERAL
The masonry Contractor shall supply all labour, materials and JOINT REINFORCEMENT
equipment necessary to complete the concrete masonry walls of this Joint reinforcement shall be used at all windows and similar openings
project in accordance with plans and specifications. This work shall be in the first two continuous bed joints under the sill, except that it may
properly co-ordinated with that of other trades. All applicable local laws, be omitted when a bond beam is provided in this position. The joint
ordinances and codes shall be fully complied with. All materials, reinforcement shall extend at least 500mm beyond the jambs or to the
workmanship and construction practices shall be of a standard not less end of the wall, whichever distance is the lesser. Joint reinforcement
than that shown on the plans or specified hereunder. used generally to control cracking throughout a wall shall be laid in the
bed joints with vertical spacings not exceeding 600mm, except that it
CARE OF MASONRY UNITS. may be omitted within 600mm of a structural diaphragm or bond
Masonry shall be stacked on planks off the ground, and in wet weather beam.
shall be covered with tarpaulins or otherwise kept dry. At the end of
each day’s work the top the wall shall be covered with tar paper, BRACING DURING CONSTRUCTION
polyethylene sheets, or by other means protected from excessive wet. Masonry walls constructed in locations where they may be exposed to
The masonry units should not be dampened prior to laying, but shall high winds during erection shall not be built higher than 10 times their
be laid in the dry state. thickness unless adequately braced, or until provision is made for the
prompt installation of permanent bracing at the floor or root level
PROPERTY SPECIFICATIONS immediately above the storey under construction. Back-filling shall not
Mortar should is at description of builder/ carpenter, as it applies to be placed against foundation walls until they have been braced to
property specifications. Local available plasticizers may be used when withstand the horizontal pressure.
approved by the architect

MORTAR PROPORTIONS
Above damp-proof course level 1:1:6 (cement: lime: sand)

INTERSECTING BEARING WALLS

Intersecting block bearing walls should not be tied together in a
masonry bond, accept at the corners, instead one wall should
terminate at the face of the other wall with the control joint at that
point.

For tying non-bearing block walls to other walls, strips of metal lath or
5mm mesh galvanised hardware cloth are placed across the joint
between the two walls. The metal strips are placed in alternate courses
in the wall. When one wall is constructed first, the metal strips are built
into the wall and later tied into the mortar joint of the second wall.
Where the two walls meet, the vertical mortar joint is raked out to a
depth of 15mm, if it exposed to view in the finished building, and
calking compound is packed into this recess.

CONTROL JOINTS
Control joints shall be located where4 shown and has detailed on the
plans. Control joints shall form a continuous vertical break from top to
bottom of wall or form bond beam to bond beam. Provision shall be
made for adequate lateral stability (detail on plans). Joint shall be filled
with mortar and pointed with a non-hardening plastic filler. Plastic filler
shall be tooled to match joint or struck flush as shown in details. No
reinforcing shall be used across a control joint.

FOOTINGS
The size and proportion of footings shall be based on an assessment of
the load to be carried, the bearing capacity of the foundation material,
and any other factors which may affect the stability and carrying capacity
of the footing. For one-story construction using two walls, footings may
be proportioned for size with average uniform foundation materials as
follows:

Width Depth
For walls … 2t, but not less than 240mm 4/3t
For piers … t, but not less than 200mm t
Where t = The overall thickness of the wall (including any cavity)
= The maximum cross-sectional dimension of the pier
 Precast - Pricelist
Effective: 01st January 2023 to 31st December 2023
Product Product Qty per Weight Unit Price
Codes Description Dimensions Pallet (Tonne) Each

Paving Slabs Thickness x Width x Length

42020 Paving Slabs 1 50mm x 300mm x 300mm 48 0.005 K 27.70
42021 Paving Slabs 2 50mm x 450mm x 300mm 36 0.020 K 43.85
41000 Paving Slabs 3 50mm x 450mm x 450mm 24 0.026 K 45.28
41002 Paving Slabs 4 50mm x 600mm x 600mm 20 0.040 K 75.80
Wash Tubs
40000 Double Wash Tub 4 0.122 K 258.30
40001 Single Wash Tub 8 0.067 K 182.90
40002 Wash Tub Legs 20 0.039 K 72.90
Grease Traps
40003 Grease Traps 3 0.065 K 169.60

Wheel Stoppers Length x Width x Thickness

40009 Wheel Stoppers 1650mm x 150mm x 100mm 28 0.070 K 250.00
Kerbs
41038 Precast Kerb Type B1 - 500mm K 59.50
V0083 Precast Kerb Type B1 – 1000mm K 119.00
xPrecast Kerb Type B1 – 1500mm x
V0082 P.O.A
x
Manhole Components Thickness x Diameter
42000 Lid 1 Top Heavy 1 100mm X 1370mm 5 0.550 K 490.60
42001 Lid 1 Top Heavy 2 150mm x 1370mm 5 0.447 K 612.20
42002 Lid 1 Top Heavy 3 150mm x 1400mm 5 0.570 K 634.60
42003 Lid 1 Top Heavy 4 150mm x 1500mm 5 0.640 K 708.10
42006 Lid 1 Top Heavy 5 150mm x 1780mm 5 1.556 K 989.00
42004 Lid 1 Top Heavy 6 200mm x 1650mm 4 1.026 K 1,051.20
42005 Lid 1 Top Heavy 7 200mm x 1800mm 4 1.220 K 1,224.60
42019 Lid 1 Top Heavy 8 200mm x 2100mm 4 1.661 K 1,640.70
42014 Lid 1 Top Heavy 9 200mm x 2150mm 4 0.820 K 1,711.80
42007 Surround DWS A4/6072 160mm x 850mm 5 0.140 K 278.80
42008 Manhole Lid 3 80mm x 680mm 10 0.045 K 108.10
Step Threads Thickness x Width x Length
41004 Step Treads 900mm 55mm x 300mm x 900mm 20 0.036 K 162.76
41005 Step Treads 1050mm 55mm x 300mm x 1050mm 20 0.042 K 176.20
41006 Step Treads 1200mm 55mm x 300mm x 1200mm 20 0.020 K 187.16
41007 Step Treads 1800mm 55mm x 300mm x 1800mm 12 0.093 K 234.82

Registered Office: Saraga Street, 6 Mile, PO Box 734, Port Moresby, Papua New Guinea

T. +675 3253344 / +675 7111 1674 F. +675 3253389 E. admin@monier.com.pg www.monier.com.pg

Product Product Qty per Weight Unit Price
Codes Description Dimensions Pallet (Tonne) Each

Lintel Beams Thickness x Width x Length

41011 Lintel Beams 1 300mm x 400mm x 1800mm N/A 0.250 K 579.30
41012 Lintel Beams 2 355mm x 380mm x 2400mm N/A 0.333 K 916.80

House Posts Thickness x Width x Length

41022 Solid Post 200mm x 200mm x 3600mm N/A - K 525.91
41023 Hollow Post 200mm x 200mm x 3600mm N/A - K 509.82

Box Culverts Span x Leg x Length

41025 Box Culverts 1 600mm x 600mm x 1200mm N/A 0.728 K 1,533.60
44011 Box Culverts 2 1200mm x 300mm x 1200mm N/A 0.912 K 1,805.40
44006 Box Culverts 3 1200mm x 600mm x 1200mm N/A 1.027 K 1,951.30
42017 Box Culverts 4** 1200mm x 750mm x 1200mm N/A 1.599 K 2,159.90
44007 Box Culverts 5 1200mm x 900mm x 1200mm N/A 1.209 K 2,163.80
41026 Box Culverts 6 1500mm x 900mm x 1200mm N/A 2.239 K 3,835.50
41014 Box Culverts 7 1800mm x 1200mm x 1200mm N/A 2.787 K 4,421.90
41013 Box Culverts 8 2100mm x 1200mm x 1200mm N/A 3.250 K 5,918.10
44010 Box Culverts 9 2100mm x 1800mm x 1200mm N/A 3.900 K 5,949.70
44008 Box Culverts 10 2400mm x 2100mm x 1200mm N/A 3.482 K 6,679.70
44009 Box Culverts 11 2400mm x 2400mm x 1200mm N/A 4.783 K 8,106.60
** Heavy type

Gully Pit Width x Height x Length

41015 Gully Pit 850mm x 1000mm x 950mm N/A 1.250 K 1,388.90

Lego Blocks Width x Height x Length

40007 Lego Block 1 600mm x 600mm x 600mm N/A 0.590 K 300.00
40008 Lego Block 2 600mm x 600mm x 1200mm N/A 1.180 K 500.00
Barriers
41018 Barrier 2400mm N/A 1.750 K 2,038.60
41029 Barrier 3000mm N/A 2.303 K 2,464.40
Pit Covers
42009 Cover Pit # 3 20 0.027 K 90.45
42010 Cover Pit # 4 20 0.028 K 92.25
42011 Cover Pit # 6 & 8 20 0.040 K 105.10
Stahlton Ribs/ Beams Price/ LM
43537 D100 Stahlton Ribs/ Beams K 159.30
43538 D125 Stahlton Ribs/ Beams K 175.90
43539 D150 Stahlton Ribs/ Beams K 192.60
43540 D175 Stahlton Ribs/ Beams K 219.35
43541 D200 Stahlton Ribs/ Beams K 248.75
43542 D225 Stahlton Ribs/ Beams K 275.50
Rates are Ex-Precast Yard, 9 Mile, Port Moresby
The above rates “exclude” 10% GST & are subject to change without prior notice.
Pallet charge K 90.00 per pallet will be charged. Pallet charge is refundable on return of pallet/s in good condition within 6 months of
delivered date.
Delivery of Precast Product delivered on pallet are charged at K40/pallet
Delivery of Precast products not on pallet: - Block Truck = K 500.00 per hour – Customer responsible to offload (Where possible Monier
assist to offload) -Semi Trailer = K 688.00 per hour – Customer responsible to offload
***Subject to Monier’s terms and condition of quotation and supply***
2
 Reinforced Concrete Pipes
Pricelist Class 2, 3 and 4
Effective: 01st January 2023 to 31st December 2023

Class 2 (X) Class 3 (Y) Class 4 (Z)

Diameter Joint 2.5m 2.5m 2.5m

(mm) Type Product Code Rates/ Each Product Code Rates/ Each Product Code Rates/ Each

300 FLUSH 3FJ03002 K 582.18 3FJ03003 K 587.15 3FJ03004 K 593.10

375 FLUSH 3FJ03752 K 642.97 3FJ03753 K 648.89 3FJ03754 K 656.00

450 FLUSH 3FJ04502 K 730.02 3FJ04503 K 738.21 3FJ04504 K 748.19

525 FLUSH 3FJ05252 K 827.58 3FJ05253 K 837.03 3FJ05254 K 848.57

600 FLUSH 3FJ06002 K 959.04 3FJ06003 K 972.16 3FJ06004 K 988.21

750 FLUSH 3FJ07502 K 1,215.65 3FJ07503 K 1,231.40 3FJ07504 K 1,250.90

900 FLUSH 3FJ09002 K 1,481.16 3FJ09003 K 1,509.56 3FJ09004 K 1,545.09

1050 FLUSH 3FJ10502 K 1,880.95 3FJ10503 K 1,926.76 3FJ10504 K 1,982.27

1200 FLUSH 3FJ12002 K 2,482.28 3FJ12003 K 2,555.66 3FJ12004 K 2,642.55

1350 FLUSH 3FJ13502 K 2,869.96 3FJ13503 K 2,950.29 3FJ13504 K 3,047.63

1500 FLUSH 3FJ15002 K 3,548.34 3FJ15003 K 3,638.00 3FJ15004 K 3,746.71

1800 FLUSH 3FJ18002 K 4,650.68 3FJ18003 K 4,798.30 3FJ18004 K 5,010.43

Class 2 (X) Class 3 (Y) Class 4 (Z)

Diameter Joint 2.5m 2.5m 2.5m

(mm) Type Product Code Rates/ Each Product Code Rates/ Each Product Code Rates/ Each

300 RRJ 3RJ03002 K 1,102.09 3RJ03003 K 1,106.91 3RJ03004 K 1,112.64

375 RRJ 3RJ03752 K 1,190.65 3RJ03753 K 1,196.42 3RJ03754 K 1,203.24

450 RRJ 3RJ04502 K 1,291.83 3RJ04503 K 1,300.17 3RJ04504 K 1,309.77

525 RRJ 3RJ05252 K 1,406.01 3RJ05253 K 1,415.09 3RJ05254 K 1,426.19

600 RRJ 3RJ06002 K 1,567.14 3RJ06003 K 1,579.90 3RJ06004 K 1,595.29

750 RRJ 3RJ07502 K 1,829.61 3RJ07503 K 1,859.39 3RJ07504 K 1,878.24

900 RRJ 3RJ09002 K 2,135.95 3RJ09003 K 2,163.45 3RJ09004 K 2,197.80

1050 RRJ 3RJ10502 K 2,569.30 3RJ10503 K 2,613.88 3RJ10504 K 2,667.95

1200 RRJ 3RJ12002 K 3,080.76 3RJ12003 K 3,151.40 3RJ12004 K 3,235.72

1350 RRJ 3RJ13502 K 4,082.22 3RJ13503 K 4,160.91 3RJ13504 K 4,224.36

1500 RRJ 3RJ15002 K 4,818.64 3RJ15003 K 4,906.65 3RJ15004 K 5,013.32

1800 RRJ 3RJ18002 K 5,909.31 3RJ18003 K 6,016.38 3RJ18004 K 6,229.92

The above rates “exclude” 10% GST & are subject to change without prior notice.

Notes:
1. All prices listed are for collection of pipes ex. Monier, 9 Mile Pipe Plant, Port Moresby
2. All prices are subject to change without prior notice
3. All pipes are manufactured to Australian Standards AS/NZS 4058
4. For 1200 and 1370mm manholes use 1050mm and 1200mm respectively
5. Delivery of all Pipes products:- Block Truck = K 500.00/ hour – Customer responsible to offload (where possible Monier will offload)
Semi Trailer = K 688.00/ hour – Customer responsible to offload

*** Subject to Monier’s terms and condition of quotation and supply ***

Registered office: Saraga Street 6 Mile, PO Box 734, Port Moresby, Papua New Guinea
T. +675 3253344 | +675 7111 1674 | F. +675 3253389 | E. sales@monier.com.pg www.monier.com.pg
 MONIER WATER SOLUTIONS
RETAIL PRICELIST
WATER & SEPTIC TANK

Effective: 09/01/23

Item Price PGK

Water Tanks One Piece

1,130L (250Gal) 1 Pc S/Taper Water Tank 980.00
2,000L (450Gal)1 Pc S/Taper Water Tank 1,520.00
4,500L (1,000Gal) 1 Pc D/Taper Water Tank 2,380.00
4,500L (1,000Gal) 1 Pc S/Taper Water Tank 2,380.00
5,000L(1,100Gal) Household Water Tank 2,750.00
9,000L (2,000Gal) 1Pc D/Taper Water Tank 3,500.00
9,000L (2,000Gal) 1Pc S/Taper Water Tank 3,500.00
10,000L (2,200Gal) Household Water Tank 4,230.00
13,500L (3,000Gal) 1Pc S/Taper Water Tank 5,700.00

Water Tank Two Piece (For Easy Shipping)

1,130L (250Gal) 2Pc S/Taper Water Tank 1050.00
2,000L (450Gal) 2Pc S/Taper Water Tank 1,630.00
4,500L (1,000Gal) 2Pc D/Taper Water Tank 2,870.00
4,500L (1,000Gal) 2Pc S/Taper Water Tank 2,620.00
9,000L (2,000Gal) 2Pc D/Taper Water Tank 4,000.00
9,000L (2,000Gal) 2Pc S/Taper Water Tank 3,650.00

Septic Tank One Piece

2,000L (450Gal) 1Pc Septic Tank 1,650.00
4,500L (1,000Gal) 1Pc Septic Tank 2,500.00
5,000L (1,100Gal) Septic Tank 2,800.00
9,000L (2,000Gal) 1Pc Septic Tank 3,550.00
10,000L (2,200Gal) Septic Tank 4,280.00
13,500L (3,000Gal) 1Pc Septic Tank 5,800.00

Septic Tank Two Piece (For Easy Shipping)

1,130L (250Gal) 2Pc Septic Tank 1150.00
2,000L (450Gal) 2Pc Septic Tank 1,680.00
4,500L (1,000Gal) 2Pc Septic Tank 2,650.00
9,000L (2,000Gal) 2Pc Septic Tank 3,700.00

- Prices do not include 10% G.S.T

- Prices do not include Cartage, Packing and Freight charges
- If Purchasing 2 Piece Tanks for shipment, contact sales staff to find out on packing charges.
- Prices may charge due to change in costs, Poly Allied will advice prior.
- Accessories supplied with the tanks are follows:
* 2,000L,4,500L and 5,000L Water Tank have a Brass Fitting Outlet 1-1/4” (M) x 1” (F)
* 9,000L,10,000L and 13,500L Water Tank have a Brass Fitting Outlet 2” (M) x 1-1/2” (F)
* All Water Tanks are supplied with Strainer and Over flow Screen
- The Septic tank has 100mm PVC Inlet and Outlet

Saraga Street, 6mile, PO Box 734, Port Moresby, Papua New Guinea

Proud Member’s of:

 Height - 1,200 mm Height - 1,450 mm
Base - 1,190 mm Base - 1,230 mm
Top - 1,410 mm Top - 1,670 mm
Outlet - 3/4" x 1/2" Brass (BSP) Outlet - 1 1/4" x 1" Brass (BSP)
Weight - 30.2 Kg Weight - 51 Kg

Price:
Price:
Price:
Price:
K935.00
K795.00
K935.00
K935.00
K935.00
(1Pc)
++(1Pc)
G.S.T
G.S.T (1Pc)
(1Pc)
Price:
Price: K1,440.00
K1,224.00
Price:K1,440.00
K1,440.00
(1Pc)
+ (1Pc)
G.S.T (1Pc)
K1,007.00
K1,007.00
K829.00 + (2Pc)
+ G.S.T (2Pc)
G.S.T
(2Pc)
K1,007.00(2Pc)
K1,007.00 (2Pc) K1,550.00
K1,385.00
K1,550.00 (2Pc)
K1,550.00 (2Pc) (2Pc)
+ G.S.T

ight - -1,760 mm Height - 1,720 mm

Height
Height1,760 mm mm
- 1,760 Base - 1,820 mm
Base
BaseBase - 2,000
- 2,000 mmmm
- 2,000 mm Middle - 2,080 mm
Top - 2,280
Top Top- 2,280 mmmm
- 2,280 mm Top - 1,800 mm
Outlet- 1- 11/4"
Outlet 1/4" x1"1"Brass
brass(BSP)
(BSP)
Outlet - 1x1/4" x 1" Brass (BSP) Outlet - 1 1/4" x 1" Brass (BSP)
Weight- 88.1
Weight - 88.1Kg Kg
Weight - 88.1 Kg Weight - 88.5 Kg
Price:K2,250.00
Price: K2,250.00
K1,875.00 (1Pc)
(1Pc)
(1Pc) Price: K2,250.00
K1,875.00
Price: K2,250.00
K2,250.00 (1Pc)(1Pc)
Price: K2,250.00 + G.S.T (1Pc) Price: +(1Pc)
G.S.T
K2,475.00
K2,475.00 +(2Pc)
K2,475.00 (2Pc)
K2,062.00 (2pc)
G.S.T (2Pc) K2,745.00
K2,745.00
K2,287.00
K2,745.00 (2Pc)
(2Pc)(2Pc)
+ G.S.T

Height - 1,600 mm
Height - 2,170 mm Base - 2,600 mm
Base - 1,885 mm Middle - 2,880 mm
Top - 1,885 mm Top - 2,600 mm
Outlet - 1 1/4" x 1" Brass (BSP) Outlet - 2" x 1 1/2" Brass (BSP)
Weight - 119 Kg Weight - 176 Kg
Price:
Price:K2,550.00
K2,550.00+ (1Pc)
G.S.T (1Pc) Price: K3,160.00 + G.S.T (1Pc)
Price: K3,160.00
Price:K3,680.00
K3,160.00(1Pc)
(1Pc)
Price: K2,167.50
Price: K2,167.00 (1Pc)
K2,550.00 (1Pc) K2,765.00 (1Pc)(2Pc)
+ G.S.T
K3,680.00 (2Pc)
K3,680.00
K3,220.00 (2Pc)
(2Pc)

Height - 2,620 mm Height - 2,210 mm

Base
Base
Height- 2,360
- 2,620mm
mm Height- 2,510
- 2,210mm
mm
Top
Base -2,360
- 2,360mm
mm Top
Base -2,866
- 2,510mm
mm
Outlet
Top - -2"2,360
x 1 1/2"
mmBrass (BSP) Outlet
Top - -2"2,866
x 1 1/2"
mmBrass (BSP)
Weight - 201 Kg
Outlet - 2" x 1 1/2" Brass (BSP) Weight - 176.5 Kg
Outlet - 2' x 1 1/2" Brass (BSP)
Weight - 201 kg Weight - 176.5 Kg
Price: K3,825.00 + G.S.T (1Pc) Price: K3,160.00 + G.S.T (1Pc)
Price:
Price:
Price: K3,825.00
3,825.00
K3,825.00
K3,366.00 (1Pc)
(1Pc)
(1Pc) Price:K2,765.00
Price:
Price: K3,160.00
K3,160.00(1Pc)
(1Pc)
(1Pc)
K3,280.00 + G.S.T (2Pc)
K3,280.00 (2Pc)
K3,280.00 (2Pc)
K2,870.00 (2Pc)

HeightHeight
- 2,620 mm mm
- 2620
Base Base
- 2,800 mm
- 2,800 mm Note
Top Top - 3,200 mm mm
- 3,200
OutletOutlet
- 2" x-12"1/2"
2Piece (2Pc) Tanks are recommended
x 1 Brass (BSP)(BSP)
1/2" Brass
Weight - 289 Kg for
Note bulk transportation and shipment.
Note
Weight - 289 Kg
- 2Piece
- 2Piece (2Pc) tanks are
(2Pc)Tanks arerecommended
recommended
Price: K5,265.00 (1Pc)
Price: K5,265.00 + G.S.T (1Pc) for
for bulk
for bulk
bulk
bulk transportation
transport and
transportation
transportation and shipment.
shipment.
and
and shipment
shipment.
- Prices
- Pricesare aresubject
subjecttotoconfirmation.
confirmation.
Price: K4,855.00(1Pc)
Price: K5,265.00 (1Pc) - Prices
- Pricesdodonot notinclude
include10%
10%G.S.T.
G.S.T.

MONIER
MONIER WATER
WATER SOLUTIONS
SOLUTIONS
(Trading as POLY ALLIED
FOR PRODUCTS
FURTHER LTD)
INFORMATION
SECTION
SECTION32, 32,LOT
LOT12,
12, ForFOR
c,hj FUTHER
FURTHER
FOR
INFORMATION
FURTHER
INFORMATION
INFORMATION
SECTION 32, ALLOTMENT12, VISIT: www.monier.com.pg or or
call
SARAGA
SARAGA STREET,
STREET, 6
SARAGA STREET, 6 MILE,6
MILE
MILE, VISIT: www.monier.com.pg callour
callour Sales
oursales Team
Sales Team
Team
PORT
P.O.
PORTBOXMORESBY
MORESBY
734, PORT MORESBY Email: sales@monier.com.pg
Email: sales@monier.com.pg
PAPUA NEW GUINEA M: 7111M:7111
2337/2337 T: 325
7200T:0674 T:3344
325 3344
P.O. BOX
P.O. Box 734,
734, PORT
PORT MORESBY
MORESBY M:7111 2337 325 3344
 Height - 1,200 mm Height- 1,450
Height - 2,170
mmmm
Base - 1,190 mm Base - 1,230
Base - 1,885
mmmm
Top - 1,410 mm Top - 1,670
Top - 1,885
mmmm
Inlet - 100 mm PVC Inlet - 100
Inlet - 100 mm PVC
mm PVC
Outlet - 100 mm PVC Outlet - 100 mm PVC
Outlet - 100 mm PVC
Weight - 30.2 Kg Weight - 119 Kg
Weight - 51Kg

Price: K1,167.00
Price:
Price: K1,167.00+(2Pc)
K1,167.00 +G.S.T
G.S.T(2Pc)
(2Pc) Price:
Price: K1,539.00
K1,539.00 (1Pc)
Price: K2,720++
K2,720.00
Price: G.S.T
G.S.T(1Pc)
(1Pc)
(1Pc)
K1,638.00 (2Pc)
K1,638.00 + G.S.T (2Pc)

Height
Height - -1,760
1,450mm
mm Height- 2,620
Height - 1,760
mmmm
Height - 1,760 mm Height
Base--2,170
Height 2,170 mm
mm
- 2,000 mm
Base - -2,000
1,230mm
mm Base
Base -- 2,000
Top
Top
mm
1,670mm
- 2,280 mm Top ---1,885
Base
Base 2,360
1,885 mm
mm
mm
- 2,280 mm
Top
Inlet - 2,280
100 mmmmPVC Top
Top
TopInlet ---1,885
2,360
1,885
- 100 mm
mm
mm
mm PVC
Inlet - 100 mm PVC
Outlet
Inlet - 100 mm PVC Inlet
Inlet
Inlet ---100
Outlet 100
- 100
100 mmmm
mm mmPVC
PVCPVC
Outlet - 100 mm PVC
Outlet - 100 mm PVC Outlet ---100
Outlet
Outlet 100mm
100 mm PVC
mm PVC
Weight - 51 Kg Weight - 88.1 Kg
Weight - 88.1 Kg
Weight - 88.1 Kg Weight
Weight---119
Weight 201Kg
119 Kg
Kg

Price:
Price: K2,360.00
K1,539.00+(1Pc)
Price: K2,360.00 +G.S.T
G.S.T (1Pc)
(1Pc) Price:
Price:
Price:
Price:
K2,720.00
K2,360.00 (1Pc)
++G.S.T
K2,360.00
K2,720.00 G.S.T (1Pc)
+ G.S.T
(1Pc)(1Pc)
K2,587.00
K1,638.00 (2Pc)
+ G.S.T (2Pc)
K2,587.00 + G.S.T (2Pc) K2,587.00
K2,587.00 + G.S.T
+ G.S.T (2Pc)
(2Pc)

Height - 2,210 mm Height - 2,620 mm

Base - 2,510 mm Base - 2,360 mm
Top - 2,866 mm Top - 2,360 mm
Inlet - 100 mm PVC Inlet - 100 mm PVC
Outlet - 100 mm PVC Outlet - 100 mm PVC
Weight - 176.5 Kg Weight - 201 Kg

Price:
Price:
Price: K3,287.00
K3,287.00
K3,287.00 + G.S.T
+ G.S.T
(1Pc) (1Pc)
(1Pc)
K3,400.00 +
K3,400.00(2Pc)
K3,400.00 G.S.T (2Pc)
+ G.S.T (2Pc) Price: K3,975.00
K3,975.00(1Pc)
+ G.S.T (1Pc)
Price:

Height - 2,620 mm
Base - 2,800 mm Note
Top - 3,200 mm Note
NoteNote: (2Pc) tanks are recommended
2Piece
Inlet - 100 mm PVC Note:
2Piece
for bulk2Peice
(2Pc) (2Pc)
TanksTanks
transportation for forshipment.
easy
and easy Packing
Packing,
Outlet - 100 mm PVC -- 2Piece
2Piece (2Pc)
(2PC) tanks
tanks are
are
and Transport. recommended
recommened
Weight - 289 Kg forShipment and Transport.
bulk transportation and shipment.
for bulk transportation and shipment.
-- Prices
Prices are
are subject
subject to
to confirmation.
confirmation.
Price: K5,400.00
K5,400.00 ++ G.S.T
G.S.T (1Pc)
(1Pc)
-- Prices
Prices do not include 10%
do not include 10% G.S.T.
G.S.T.
Price: K5,400.00 (1Pc)
MONIER
MONIER WATER
WATER SOLUTIONS
SOLUTIONS
MONIER
(Trading WATER
as POLY ALLIED SOLUTIONS
PRODUCTS
FOR FURTHER LTD)
INFORMATION
SECTION 32,
SECTION 32,LOT 12,
ALLOTMENT 12, FOR FURTHER INFORMATION
(Trading as POLY ALLIED
VISIT: PRODUCTS
www.monier.com.pgLTD)
or call our Sales Team
SARAGA STREET, 6 MILE,
SARAGA STREET, 6 MILE, VISIT: www.monier.com.pg or call our Sales Staff
SECTION
P.O.PORT
BOX MORESBY 32, ALLOTMENT
734, PORT MORESBY 12 Email:Email:
sales@monier.com.pg
sales@monier.com.pg
PAPUA NEW GUINEA M:2337/
7111 2337
P.O. BOX 734, PORTMORESBY M: 7111 7200T:0674
325 3344
T: 325 3344

(Trading as POLY ALLIED PRODUCTS LTD)

 MONIER WATER SOLUTIONS
(DIVISION OF MONIER LIMITED)
Saraga Street, 6 Mile
P.O. Box 734
Port Moresby
Phone : 72000674/ 71111674, sales@monier.com.pg

RETAIL PRICE LIST

HDPE POLY PIPE
Effective Date: 1/03/22
9/01/2023

SDR 26 21 17 13.6 11
Standard Maximum
PN 6.3 8.0 10.0 12.5 16.0 Length Length
DN Price/mtr Price/mtr Price/mtr Price/mtr Price/mtr (Mtr) (Mtr)
16 K2.38 300 400
20 K2.60 K2.71 200 400
25 K2.95 K3.17 K3.51 200 300
32 K5.01 K5.34 K5.79 K6.24 200 250
40 K6.54 K7.21 K7.89 K8.67 150 200
50 K9.07 K9.97 K10.98 K12.32 150 200
63 K13.09 K14.21 K15.88 K17.56 K19.69 100 150
75 K17.42 K19.10 K21.34 K23.58 K26.49 100 100
90 K22.86 K25.21 K28.34 K31.58 K37.26 100 100
110 K29.65 K33.23 K37.71 K42.85 K52.17 100 100
125 K37.17 K42.10 K47.69 K54.63 K63.27 6 75
160 K51.29 K59.01 K68.19 K79.49 K95.30 6 12
200 K82.71 K95.13 K109.57 K126.91 K151.00 6 12
250 K122.18 K140.87 K163.92 K191.78 K233.26 6 12
315 K197.26 K226.57 K263.72 K307.59 K365.10 6 12

Note: - Prices do not include G.S.T.

- Prices do not include Cartage, Packing and Freight charges.
- All pipes are manufactured to Australian Standards AS/NZS4130
- Prices are subject to change without prior notice.

7/02/2023 10:29 AM Price Lists Poly Pipe Retail Price List 090123