Product Data Sheet
Castrol EDGE 0W-30 A3/B4
Fluid TITANIUM - Stronger Under Pressure
Description
Today’s engines continually push the boundaries of technology and engineering. They are smaller and ultra-efficient,
without sacrificing performance. Advanced engines challenge the oil with increased pressures. These intense
pressures cause friction, which can waste up to 10% of an engine’s performance.
Castrol EDGE with patented Fluid TITANIUM transforms its physical structure to be stronger under pressure to keep
metal apart and reduces friction for maximum engine performance when you need it most.
Castrol EDGE with Fluid TITANIUM: unlock the true performance of your engine.
Application
Castrol EDGE 0W-30 A3/B4 is suitable for use in automotive gasoline and diesel vehicles where the manufacturer
recommends: ACEA A3/B3, A3/B4, API SL/CF 0W-30 Lubricant
Castrol EDGE 0W-30 A3/B4 is approved for use in vehicles from leading manufacturers. Please refer to the product
performance section and your owners handbook.
Advantages
Castrol EDGE 0W-30 A3/B4 with Fluid TITANIUM is the natural choice for drivers who demand maximum engine
performance from today’s modern vehicles requiring a high level of protection and higher performance oils.
Castrol EDGE 0W-30 A3/B4:
Transforms to be strongest when the pressure is highest, protecting your engine
Reduces power-robbing friction across engine speeds and conditions
Independently tested at the highest standards for proven performance
Recommended by world-leading car manufacturers
Protects the engine for the entire drain interval even under extreme pressure
Delivers high levels of fuel efficiency and low temperature performance
Page: 1/2
Typical Characteristics
Name Method Units Castrol EDGE 0W-30 A3/B4
Density @ 15C, Relative ASTM D4052 g/ml 0.843
Viscosity, Kinematic 100C ASTM D445 mm²/s 12
Viscosity, CCS -35C (0W) ASTM D5293 mPa.s (cP) 5500
Viscosity, Kinematic 40C ASTM D445 mm²/s 67
Viscosity Index ASTM D2270 None 177
Pour Point ASTM D97 °C -57
Flash Point, PMCC ASTM D93 °C 209
Ash, Sulphated ASTM D874 % wt 1.1
The above figures are typical of those obtained with normal production tolerance and do not constitute a specification.
Product Performance Claims
ACEA A3/B3, A3/B4
API SL/CF
MB-Approval 229.3/ 229.5
VW 502 00/ 505 00
User Advice
Health, safety and environmental information is provided for this product in the Safety Data Sheet. This gives details of
potential hazards, precautions and first aid measures, together with environmental effects and disposal of used
products. Castrol will not accept liability if the product is used other than in the manner or with the precautions or the
purpose/s specified. Before the product is used other than as directed, advice should be obtained from the local Castrol
office or www.castrol.com.
Storage
All packages should be stored under cover. Where outside storage is unavoidable drums should be laid horizontally to
avoid the possible ingress of water and damage to drum markings. Products should not be stored above 60°C, exposed
to hot sun or freezing conditions.
Castrol EDGE 0W-30 A3/B4
28 Dec 2018
Castrol, the Castrol logo and related marks are trademarks of Castrol Limited, used under licence.
This Data Sheet and information it contains is considered to be accurate at the date of printing. No warranty or representation, expressed or implied, is made as
to the accuracy or completeness of the data and information contained in this publication. No statement made in this publication shall be construed as a
permission, recommendation or authorization given or implied to practice any patented invention without a valid license. It is the User's obligation to evaluate and
use products safely and within the scope advised in the Data Sheet, to assess suitability for the intended application, and to comply with all applicable laws and
regulations. Material Safety Data Sheets are available for all our products and should be consulted for appropriate information regarding storage, safe handling,
and disposal of the products. The Seller shall not be responsible for any loss, damage or injury resulting from any abnormal use of the product, from any failure to
adhere to recommendations, nor from any hazards or risks which are i) identified in the Data Sheet, ii) inherent in the nature of petroleum products or iii)
associated with the petroleum products concerned (provided that this disclaimer shall not affect any statutory rights of the Buyer of the petroleum products
concerned). All products, services and information supplied are provided under our standard conditions of sale. You should consult our local representative if you
require any further information.
BP Lubricants USA Inc., 1500 Valley Road , Wayne, NJ 07470
www.castrol.com
Page: 2/2
