GN (AGN) TESTING

ULTRA-SMALL PACKAGE
SLIM POLARIZED RELAY GN RELAYS (AGN)
FEATURES
10.60±0.3
5.70±0.3 • Compact slim body saves space • Increased packaging density
.224±.012
.417±.012 Thanks to the small surface area of 5.7 Due to highly efficient magnetic circuit
9.00±0.3 mm × 10.6 mm .224 inch × .417 inch and design, leakage flux is reduced and
.354±.012
low height of 9.0 mm .354 inch, the changes in electrical characteristics from
packaging density can be increased to components being mounted close-
allow for much smaller designs. together are minimized. This all means a
• Outstanding surge resistance. packaging density higher than ever
Surge withstand between open contacts: before.
10.60±0.3
5.70±0.3 1,500 V 10×160 µs (FCC part 68) • Nominal operating power: 140 mW
.224±.012
.417±.012 Surge withstand between contacts and • Outstanding vibration and shock
Max.10.00 coil: 2,500 V 2×10 µs (Telcordia) resistance.
.394
• The use of twin crossbar contacts Functional shock resistance:
ensures high contact reliability. 750 m/s2 {75G}
AgPd contact is used because of its good Destructive shock resistance:
sulfide resistance. Adopting low-gas 1,000 m/s2 {100G}
mm inch molding material. Coil assembly molding Functional vibration resistance:
technology which avoids generating 10 to 55 Hz (at double amplitude of 3.3
volatile gas from coil. mm .130 inch)
Destructive vibration resistance:
RoHS Directive compatibility information
10 to 55 Hz (at double amplitude of 5 mm
http://www.nais-e.com/ .197 inch)

SPECIFICATIONS
Contact Characteristics
Arrangement 2 Form C Initial insulation resistance*1 Min. 1,000MΩ (at 500V DC)
Initial contact resistance, max. Initial Between open contacts 750 Vrms for 1min.
100 mΩ
(By voltage drop 6 V DC 1A ) breakdown Between contact sets 1,000 Vrms for 1min.
Stationary: AgPd+Au clad voltage*2 Between contacts and coil 1,500 Vrms for 1min.
Contact material
Movable: AgPd
Between open contacts
Nominal switching capacity 1 A 30 V DC 1,500 V (FCC Part 68)
Initial surge (10×160 µs)
(resistive load) 0.3 A 125 V AC
voltage Between contacts and coil
Max. switching power 2,500 V (Telcordia)
30 W, 37.5 V A (2×10 µs)
(resistive load)
Rating Max. 4 ms (Approx. 2 ms)
Max. switching voltage 110 V DC, 125 V AC Operate time [Set time]*3 (at 20°C)
[Max. 4 ms (Approx. 2 ms)]
Max. switching current 1A Release time (without diode) Max. 4 ms (Approx. 1 ms)
Min. switching capacity [Reset time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)]
10 µA 10 mV DC
(Reference value)#1 Temperature rise*4 (at 20°C) Max. 50°C
140mW (1.5 to 12 V DC) Functional*5 Min. 750 m/s2{75G]
Nominal Single side stable
230mW (24 V DC) Shock resistance
operating Destructive*6 Min. 1,000 m/s2{100G]
power 100mW (1.5 to 12 V DC)
1 coil latching 10 to 55 Hz at double
120mW (24 V DC) Functional*7
amplitude of 3.3 mm
Mechanical (at 180 cpm) 5 × 107 Vibration resistance
10 to 55 Hz at double
Expected 1 A 30 V DC Destructive
105 amplitude of 5 mm
life (min. Electrical resistive
operations) Conditions for Ambient –40°C to 85°C
(at 20 cpm) 0.3 A 125 V AC
105 operation, transport temperature#2 –40°F to 185°F
resistive and storage*8
Remarks: (Not freezing and
* Specifications will vary with foreign standards certification ratings. condensing at low Humidity 5 to 85% R.H.
*1 Measurement at same location as “Initial breakdown voltage” section. temperature)
*2 Detection current: 10mA.
*3 Nominal voltage applied to the coil, excluding contact bounce time. Unit weight Approx. 1 g .035 oz
*4 By resistive method, nominal voltage applied to the coil; contact carrying current: Notes:
1 A. #1 This value can change due to the switching frequency, environmental conditions,
*5 Half-wave pulse of sine wave: 6 ms; detection time: 10µs. and desired reliability level, therefore it is recommended to check this with the
*6 Half-wave pulse of sine wave: 6 ms. actual load.
*7 Detection time: 10µs. #2 The upper limit for the ambient temperature is the maximum temperature that
*8 Refer to 6. Conditions for operation, transport and storage mentioned in can satisfy the coil temperature rise. Under the packing condition, allowable
AMBIENT ENVIRONMENT. temperature range is from –40 to +70°C –40° to +158°F.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

 GN (AGN)
TYPICAL APPLICATIONS
• Communications • Home appliances, and audio/visual
(XDSL, Transmission) equipment
• Measurement • Automotive equipment
• Security • Medical equipment

ORDERING INFORMATION
Ex. AGN 2 0 0 A 1 H Z

Contact arrangement Operating function Type of operation Terminal shape Coil voltage (DC) Packing style
2: 2 Form C 0: Single side stable 0: Standard type Nil: Standard PC board terminal 1H: 1.5V 09 : 9V Nil: Tube packing
1: 1 coil latching (B.B.M.) A: Surface-mount terminal A type 03 : 3V 12 : 12V Z: Tape and reel packing
S: Surface-mount terminal S type 4H: 4.5V 24 : 24V (picked from 5/6/7/8
06 : 6V pin side)
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix “X” instead of “Z”.

TYPES AND COIL DATA (at 20°C 68°F)

(1) Standard PC board terminal
Part No. Pick-up Drop-out Nominal
Nominal Max. allowable
Operating Coil Rating, voltage, voltage, operating Coil resistance,
Standard PC operating voltage,
Function V DC V DC (max.) V DC (min.) current, Ω (±10%)
board terminal power, mW V DC
(initial) (initial) mA (±10%)
AGN2001H 1.5 1.13 0.15 93.8 16 140 2.25
AGN20003 3 2.25 0.3 46.7 64.2 140 4.5
AGN2004H 4.5 3.38 0.45 31 145 140 6.75
Single side
AGN20006 6 4.5 0.6 23.3 257 140 9
stable
AGN20009 9 6.75 0.9 15.5 579 140 13.5
AGN20012 12 9 1.2 11.7 1,028 140 18
AGN20024 24 18 2.4 9.6 2,504 230 28.8

Part No. Nominal

Set voltage, Reset voltage, Nominal Max. allowable
Operating Coil Rating, operating Coil resistance,
Standard PC V DC (max.) V DC (max.) operating voltage,
Function V DC current, Ω (±10%)
board terminal (initial) (initial) power, mW V DC
mA (±10%)
AGN2101H 1.5 1.13 1.13 66.7 22.5 100 2.25
AGN21003 3 2.25 2.25 33.3 90 100 4.5
AGN2104H 4.5 3.38 3.38 22.2 202.5 100 6.75
1 coil latching AGN21006 6 4.5 4.5 16.7 360 100 9
AGN21009 9 6.75 6.75 11.1 810 100 13.5
AGN21012 12 9 9 8.3 1,440 100 18
AGN21024 24 18 18 5.0 4,800 120 36
1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

(2) Surface-mount terminal

Part No. Pick-up Drop-out Nominal Nominal Max.
Coil
Operating Coil Rating, voltage, voltage, operating operating allowable
Tape and reel resistance,
Function Tube packing V DC V DC (max.) V DC (min.) current, power, voltage,
packing Ω (±10%)
(initial) (initial) mA (±10%) mW V DC
AGN200❍1H AGN200❍1HZ 1.5 1.13 0.15 93.8 16 140 2.25
AGN200❍03 AGN200❍03Z 3 2.25 0.3 46.7 64.2 140 4.5
AGN200❍4H AGN200❍4HZ 4.5 3.38 0.45 31 145 140 6.75
Single side
AGN200❍06 AGN200❍06Z 6 4.5 0.6 23.3 257 140 9
stable
AGN200❍09 AGN200❍09Z 9 6.75 0.9 15.5 579 140 13.5
AGN200❍12 AGN200❍12Z 12 9 1.2 11.7 1,028 140 18
AGN200❍24 AGN200❍24Z 24 18 2.4 9.6 2,504 230 28.8
❍: For each surface-mounted terminal variation, input the following letter.
A type: A, S type: S
1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
Tape and reel: 500 pcs.; Case: 1,000 pcs.
2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

GN (AGN)
Part No. Reset Nominal Nominal Max.
Set voltage, Coil
Operating Coil Rating, voltage, operating operating allowable
Tape and reel V DC (max.) resistance,
Function Tube packing V DC V DC (max.) current, power, voltage,
packing (initial) Ω (±10%)
(initial) mA (±10%) mW V DC
AGN210❍1H AGN210❍1HZ 1.5 1.13 1.13 66.7 22.5 100 2.25
AGN210❍03 AGN210❍03Z 3 2.25 2.25 33.3 90 100 4.5
AGN210❍4H AGN210❍4HZ 4.5 3.38 3.38 22.2 202.5 100 6.75
1 coil
AGN210❍06 AGN210❍06Z 6 4.5 4.5 16.7 360 100 9
latching
AGN210❍09 AGN210❍09Z 9 6.75 6.75 11.1 810 100 13.5
AGN210❍12 AGN210❍12Z 12 9 9 8.3 1,440 100 18
AGN210❍24 AGN210❍24Z 24 18 18 5.0 4,800 120 36
❍: For each surface-mounted terminal variation, input the following letter.
A type: A, S type: S
1) Standard packing: Tube: 50 pcs.; Case: 1,000 pcs.
Tape and reel: 500 pcs.; Case: 1,000 pcs.
2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.

DIMENSIONS mm inch

1. PC board terminal PC board pattern Schematic (Bottom view)

10.60±0.3 5.70±0.3
7.60
Single side stable 1 coil latching
.417±.012 .224±.012 (Deenergized condition) (Reset condition)
.299
3.20
.126 3.20 1 2 3 4 1 2 3 4
.126
(0.50) 9.00±0.3
(.020) .354±.012

3.50±0.3
0.40±0.1 .138±.012 0.25±0.1 2.20 8 7 6 5 8 7 6 5
.016±.004 2.20±0.15 .010±.004 8-0.85 dia. .087 Direction indication Direction indication
.087±.006 8-.033 dia
(1.50) 3.20±0.15
3.20±0.15 .126±.006
(.059) .126±.006 Tolerance: ±0.1 ±.004

2. Surface-mount terminal Suggested mounting pad Schematic (Top view)

10.60±0.3 5.70±0.3 Single side stable 1 coil latching
1) A type .417±.012 .224±.012 3.20 2.20
.126 .087 (Deenergized condition) (Reset condition)
8 7 6 5 8 7 6 5
(0.50) 9.00±0.3 3.10
0.25±0.1 (.020) .354±.012 Max. 10.00 .122 5.30
.010±.004 .394 .209

0.40±0.1 3.20±0.15 1 2 3 4 1 2 3 4
.016±.004 2.20±0.15 .126±.006 0.80
.031 Direction indication Direction indication
.087±.006
(1.50) 3.20±0.15
(.059) 7.40±0.3
.126±.006
.291±.012 Tolerance: ±0.1 ±.004

Suggested mounting pad

10.60±0.3 5.70±0.3
3.20 2.20
1) S type .417±.012 .224±.012
.126 .087

2.25
(0.50) 9.00±0.3 .089 4.45
0.25±0.1 (.020) .354±.012 Max. 10.00 .175
.010±.004 .394

3.20±0.15 0.80
0.40±0.1 2.20±0.15 .126±.006 .031
.016±.004 .087±.006
(1.50)
(.059)
3.20±0.15
.126±.006
5.70±0.3
.224±.012
Tolerance: ±0.1 ±.004

REFERENCE DATA
1. Max. switching capacity 2. Life curve
100

DC resistive load
No. of operations, × 104

AC resistive load
Switching current, A

1.0 50
40
30
DC 30V resistive load
20

0.3
AC 125V
10 resistive load

0
30 100 0.2 0.4 0.6 0.8 1.0 1.2
Contact voltage, V Switching current, A

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.

 GN (AGN)
NOTES
1. Packing style 2. Automatic insertion
1) The relay is packed in a tube with the To maintain the internal function of the
relay orientation mark on the left side, as relay, the chucking pressure should not
shown in the figure below. exceed the values below.
Chucking pressure in the direction A:
Orientation (indicates PIN No.1)stripe 4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
Stopper (green) Stopper (red)
9.8 N {1 kgf} or less

C B
2) Tape and reel packing A
(A type)
(1)-1 Tape dimensions

;
; ;;
mm inch

Relay polarity bar

(Z type) 4.00 11.50
1.50 +0.1
0 dia .157 .453

;
.059 +.004 dia 1.75
0.40
.016
0 2.00
.079 .069 Please chuck the portion.
11.10
24.00±0.3
.945±.012
Avoid chucking the center of the relay.
.437
In addition, excessive chucking pressure
2.00dia
10.70±0.2 GN relays
.079dia 16.00 8.00 to the pinpoint of the relay should be
.630 .315
.421±.008
Tape coming out direction avoided.
General tolerance ±0.1 mm .004 inch

(S type)
(1)-2 Tape dimensions

Relay polarity bar

2.00 4.00 2.0dia 10.70±0.2
(Z type) 1.50 +0.1
0 dia .079 .157 .079dia .421±.008
.059 +.004
0 dia 1.75 0.40
.069 .016
11.50
.453 24.00±0.3
.945±.012
11.10
.437

GN relays 16.00 6.3

.630 .248
Tape coming out direction

General tolerance ±0.1 mm .004 inch

(2) Dimensions of plastic peel

mm inch

21±0.8 dia.
.827±.031 dia.

2.0±0.5
.079±.020
100±1 dia.
3.937±.039 dia.

370±2 dia.
14.567±.079 dia.

13±0.2 dia.
.512±.008 dia.
2.0±0.2
24.4 +2
0 .079±.008
.961 +.079
0

For Cautions for Use, see Relay Technical Information.

All Rights Reserved © COPYRIGHT Matsushita Electric Works, Ltd.