HAT AND MAGIC

SWORD
Crochet pattern

Designer: Olga Krylova

Instagram: @fox_and_dog

JUNE 2023
 The hat measures
about 11.5 cm (4.3
MATERIALS
inches).
1. Yarn:
Alize Cotton Gold yarn (100g/330m) of brown color
(number 493) - half of a skein (for hat)
Pekhorka Cannabis (50g/280m) of light grey color
YarnArt Jeans yarn can be
substituted with Alize (number 059) - small amount (for sword blade);
Cotton Gold of matching Gazzal Baby Cotton yarn (50g/165m) of red color
color and vice versa. But pay (number 3439) - small amount (for sword details) - you
attention, that Alize is a bit can use any yarn of red color you want.
thinner (100g/330m) and it
can affect the toy size. 2. 2 mm crochet hook Clover (or 1.75 mm of any other
brand).
3. Needle.
4. Scissors.
Pay attention that in case 5. Pins.
of using materials other
than listed, your toy size
will differ from mine. Also the toy size depends largely on the technique you
crochet single crochet stitches (V-shaped sc, X-shaped sc,
semi-X shaped sc). I give the information about
differences between these methods in the next page.
My stitches have semi-X
shape. If you use the
technique which creates “V
shaped” stitches, then your
doll would probably be
bigger.
 The way you crochet
your stitches play an
V AND X SHAPED STITCHES
important role. My Single crochet stitches can have a shape of “V” or “X”. The
stitches have a semi-X shape our stitches get depends on the way we grab the
shape. working thread when crocheting.
When you work in “yarn
over technique”, your «V-shape (Yarn over technique)». This way is counted as a
crochet pattern becomes classic one. In this case we insert the hook into the stitch
more smooth, and the (photo 1) and you place your hook under the yarn (photo 2).
fabric will be more And pull the yarn over the hook from back to front (photo
stretchy. 3). Then pull the yarn in the same way (photo 4) and finish
the stitch.
When you do “yarn under”,
the fabric becomes more «X-shape (Yarn under technique)». In this case we insert
relief and dense because of the hook into the stitch (photo 5) and place your hook over
twisting the loops. the yarn (photo 6). Pull the yarn through (photo 7). Then pull
the yarn one more time in the same way (photo 8) and finish
the stitch.

Photo 1. Photo 2. Photo 3. Photo 4.

Photo 5. Photo 6. Photo 7. Photo 8.

My stitches have a “semi-X” shape. I start to crochet a stitch like in the yarn under technique (photo
6), then pull the thread and grab the yarn for the second time like in yarn over technique (photo 4).
 Difficulty level is upper ABBREVIATIONS
intermediate.
MR - magic ring
ch - chain
This pattern doesn’t include any sc - single crochet
crochet lessons. It’s supposed hdc - half double crochet

that you know how to crochet dc - double crochet

dec - decrease
basic stitches. inc - increase
sl st - slip stitch

(..)*n - repeat the combination in

parentheses n times
(x) - at the end of every round I write a
The materials of this pattern total number of stitches in parentheses
In this pattern we use US terminology.
are copyrighted. Copying,
sharing, reselling this
document of its parts are
prohibited.
Note:

The toy pieces are crocheted in a

spiral without making a turning chain
(until otherwise stated).

For working at this toy I use invisible

decreases:
I insert the crochet hook into the front loop of
the first stitch, don’t pull the thread and at
once insert the hook into both loops of the
second stitch, pull the thread through all
stitches on the hook.
INSTRUCTIONS
Let’s start making
our accessories for
your little wizard!
1. HAT
Crochet with the yarn of brown color in a spiral. 2-10 rounds
are crocheted into front loops only. The last rounds are
crocheted into both loops of stitches, except for the stitches,
which are specially marked.

1 round: 6sc in MR (6)

2 round: 6sc (6)
3 round: (inc, 2sc)*2 (8)
4 round: 8sc (8)
5 round: (inc, 3sc)*2 (10)
2. 6 round: 10sc (10)
7 round: (inc, 4sc)*2 (12)
8 round: 12sc (12)
9 round: (inc, 5sc)*2 (14)
10 round: 7inc, 7sc (21)
11 round: into front loops only 14sc, into both loops 7sc (21)
12 round: 14sc into front loops of round 11 and at once into
back loops of round 10, into both loops 7sc (21)

13 round: into both loops (inc, 1sc)*7, 7sc (28)

3. 14-16 rounds: 28sc (28) - 3 rounds
17 round: into front loops 21inc, into both loops 7sc (49)
18 round: into front loops 42sc, into both loops 7sc (49)

19 round: 42sc into front loops of round 18 and at once into

back loops of round 16, into both loops 7sc (49)

Work or unravel 2-3sc additionally to shift the stitch marker to

the middle of the hat, like in photo 1.

20 round: 16sc, (inc, 1sc)*4, 1sc, (1sc, inc)*4, 16sc (57)

4. 21 round: 1sc, dec, 2sc, dec, 43sc, dec, 2sc, dec, 1sc (53)
22-23 rounds: 53sc (53) - 2 rounds
24 round: (4hdc, hdc inc)*2, (5sc, inc)*2, 8sc, inc, (5sc, inc)*2,
(4hdc, hdc inc)*2 (62)
25 round: (5hdc, hdc inc)*2, (6sc, inc)*2, 9sc, inc, (6sc, inc)*2,
(5hdc, hdc inc)*2 (71)
26 round: 71sc (71)
5. Crochet or unravel 1-2sc additionally to shift the stitch marker
to the middle of the back side of the hat.

27 round: 24sc, 23inc, 24sc (94)

28 round: 94sc (94)
29 round: 24sc, 46sc into front loops only, 24sc (94)
30-33 rounds: 94sc (94) - 4 rounds
34 round: 24sc, 46sc into both loops of the previous round and
at the same time into back loops left in round 28, 24sc (94)
35 round: 24sc, 23dec, 24sc (71)
36 round: 17sc, inc, (2sc, inc)*2, 11sc, inc, 11sc, (inc, 2sc)*2, inc,
6. 17sc (78)
37 round: 38sc, 2inc, 38sc (80)

In the next round we will form the eyes, and to make it we need
to pick two ends of the large fold up, crocheting stitches
through the fold stitches.

38 round: 25sc, now crochet 3sc, inserting the hook under the
stitch on the large fold and at the same time into the next stitch
on the round (photo 8), 24sc, now crochet 3sc, inserting the
hook under the stitch on the large fold and at the same time
7. into the next stitch on the round, 25sc (80)
Now find two middle stitches on the large fold to form the nose
bridge. It’s very important to make the eyes to be both the same
size.
39 round: 16sc, (inc, 3sc)*2, inc, 14sc, crochet 2sc, inserting the
hook under the middle stitch on the large fold and at the same
time into the next stitch on the round, 14sc, (inc, 3sc)*2, inc,
16sc (86)
40 round: 42sc, 2inc, 42sc (88)
41 round: 43sc, 2inc, 43sc (90)

8. 9. 10.
 42 round: 24sc, into front loops only 42sc, 24sc (90)
11. 43 round: 24sc, 42sc into both loops of the stitches on the
previous round and into the back loops left in round 41, 24sc
(90)

Pay attention to the marker location, it should be located in the

middle of the back side of the hat.

44 round: into front loops only (1sc, inc)*8, into both loops
27sc, inc, 2sc, inc, 27sc, into front loops only (1sc, inc)*8 (108)

45 round: into front loops only 24sc, into both loops 60sc, into
12. front loops only 24sc (108)
46 round: into both loops (1sc, dec)*8, 27sc, inc, 4sc, inc, 27sc,
(1sc, dec)*8 (94)

47 round: 16sc into both loops of the previous round and at the
same time into the back loops left in round 43, 62sc, 16sc into
both loops of the previous round and into the back loops left in
round 44 (94)

48-49 rounds: 94sc (94) - 2 rounds

50 round: into both loops 28sc, into front loops only 38sc, into
13. both loops 28sc (94)
51 round: into both loops 94sc (94)

52 round: 28sc, 38sc into both loops of the previous round and
at the same time into the back loops left in round 49, 28sc (94)
53 round: 38sc, 9dec, 38sc (85)

54 round: into both loops 24sc, into front loops only 14sc, 9inc,
14sc, into both loops 24sc (94)

14. 55 round: into both loops 24sc, into front loops only 46sc, into
both loops 24sc (94)
56 round: into both loops (2sc, inc)*7, 3sc, into front loops only
46sc, into both loops 3sc, (2sc, inc)*7 (108)
57 round: into front loops 108sc (108)
15. 58 round: into front loops only 31sc, 46sc into both loops of
the previous round and into the back loops left in round 54, into
front loops only 31sc (108)
59 round: into front loops only (3sc, inc)*7, 8sc, (inc, 3sc)*9, 8sc,
(inc, 3sc)*7 (131)

60-61 rounds: into front loops only 131sc (131) - 2 rounds

62 round: 50sc into both loops of stitches of the previous
round and at the same time into the back loops left in round 59,
into front loops only 26sc, 55sc into both loops of stitches of
the previous round and at the same time into the back loops left
16. in round 59 (131)

63 round: into both loops of stitches (1sc, dec (I worked

decreases in a regular way (classic decreases)))*16, 2sc, 26sc
into both loops of stitches of the previous round and at the
same time into the back loops left in round 61, into both loops
of stitches 1sc, (1sc, dec)*18 (97)

64 round: into the front loops only (1sc, inc)*48, 1sc (145)
65-66 rounds: into both loops of stitches 145sc (145) - 2 rounds
67 round: (4sc, inc)*8, 65sc, (inc, 4sc)*8 (161)
17. 68-70 rounds: 161sc (161) - 3 rounds
Cut the thread and fasten off. Weave in the thread tail.

Side straps
Put the hat on the doll and mark the stitches where we will
crochet a strap (photo 17). The wide of the strap should equal 8
stitches and finish at the level of the ear. Attach the thread to
the back loop of the stitch in round 64 at the ear level. Crochet
in turning rows.

1-15 rows: 8sc, ch, turn (8) - 15 rows

18. 16 row: dec, 4sc, dec, ch, turn (6)
17 row: 3dec (3)

Cut the thread and fasten off, weave in the thread tail. Make
the second strap on the other side of the hat. Decide with the
location in the same way. The distance between two my straps
turned out 48 stitches.
19. The back part
The width of the back part should equal 25 stitches. It should
be located in the middle of the distance between the straps.
Attach the thread to the back loop of the stitch in round 64.
Work in turning rows. Crochet 25sc in the middle of the back
side of the hat into free loops in round 64. I got free 7 stitches
left till both straps. This row will be the first one.

2-4 rows: 25sc, ch, turn (25) - 3 rows

5 row: dec, 21sc, dec, ch, turn (23)
6 row: dec, 19sc, dec, ch, turn (21)
20. 7 row: 2dec, 13sc, 2dec, ch, turn (17)
8 row: 2dec, 9sc, 2dec, ch, turn (13)
9 row: 2dec, 5sc, 2dec, ch, turn (9)

Cut the thread and fasten off, weave in the thread tail on the
wrong side of the piece.

Knot
Make ch41 and crochet from the second ch from the hook:
40sc. Cut the thread and fasten off. Tie a knot in the middle of
the piece. Sew above the hat brim in the middle of the hat
21. back (photo 22).

The hat is ready!

23. 24.

22.
25.
MAGIC SWORD
Crochet in dark grey color in a spiral. Make ch5 and crochet
from the second ch from the hook:

1 round: inc, 2sc, 3sc into one stitch, 2sc, 1sc into the last stitch
(where we have worked the first increase) (10)
2 round: 2inc, 2sc, 3inc, 2sc, inc (16)
3-5 rounds: 16sc (16) - 3 rounds
26. 6 round: 2dec, 2sc, 3dec, 2sc, dec (10) - photo 195
7 round: into back loops only 10sc (10)
8-14 rounds: into both loops of stitches 10sc (10) - 7 rounds -
when crocheting the last stitch change the thread color to grey
(the color changing point should be located exactly in the middle
of the sword side (photo 27)). Cut the dark grey thread and
fasten off.

15 round: into back loops only 10sc (10)

16-55 rounds: 10sc (10) - 40 rounds
Crochet several sc additionally so that the next decrease is
27. located exactly in the middle of the sword side. Insert the flat
wooden stick.

56 round: (dec, 3sc)*2 (8)

57 round: 8sc (8)
58 round: make ch3, work 4dc together, leaving a tail (photo
29). Now we have 4 stitches left. Close the opening on the
other side of the sword, inserting the needle into the stitches
left and into the loops of double crochet stitches, making
diagonal stitches (photo 30). Weave in the thread tail carefully
28. inside.

29. 30.
31. 32.

Make long stitches along the sword sides using the thread of
grey color. If there is a space left between the stitches and the
sword, you can glue them carefully, applying a small amount of
transparent glue on the stitches.

33. Then take the thread of dark grey color and divide it in half.
Make stitches in the same way in the middle of the sword
blade on both sides. Weave in the thread tails inside of the
piece.

Attach the thread of dark grey color to the front loops left in
round 14, hold the sword with the blade facing towards you,
crochet 4 rounds with 10sc around. Finish crocheting with sl st,
cut the thread and fasten off, weave in the thread tail inside of
the piece.
34. Side parts (make 2)
Crochet in dark grey color.
1 round: 6sc in MR (6)
2 round: (inc, 2sc)*2 (8)
3 round: (dec, 2sc)*2 (6)
4-5 rounds: 6sc (6) - 2 rounds
Cut the thread and fasten off, leaving a tail for sewing.

Take the thread of red color and embroider red stones on the
part tips, inserting the needle under the stitches of the first
35. round (photos 34-35).

Embroider a large stone on the sword handle, the diameter

should be about 3-4 stitches. I marked stitches crisscross. Then
make stitches around the stone contour. Weave in the thread
tail inside of the piece.
36. 37. 38.

Now see the side parts to the sword handle above round 14.
39. Weave in the thread tails inside of the piece.

The sword is finished!

 Congratulations!
Our accessories for
your wizard are
finished✨