Specification Sheet

H.S.K. No D ES C R I P T I O N Q'TY / UNIT

Dental unit chair system "Taurus G2"
9018.49-2000 1 Set
( SHINHUNG CO., LTD. )
1. Dental unit

1) Type: Floor mounted unit.

2) Doctor side element includes:

(1) Silicone Tubing for High speed Handpieces --------------------------------- 2 ea.

① Available with 2(3)-hole Borden, 4-hole Midwest type connector
Fiber optic connector (optional)
② can be disinfected with alcohol

(2) Silicone Tubing for Low speed Handpiece ----------------------------------- 1 ea.

① Type for Air Motor or Electric Micromotor
② can be disinfected with alcohol

(3) Three-way syringe 1 ea.

① For air, water and spray
② Tip is removable and easily autoclavable | tip rotatable
③ Silicone tube can be disinfected with alcohol.

(4) Bracket table: Ergonomically design --------------------------- 1 set

① Bracket table features a wide range of movement to accommodate dentists’ various
preference on working position.
② Instrument holder has Infrared beam switch to detect whether instruments are taken out
from holder for use. Priority circuit integrated in instrument holder allows only first-taken
instrument to be operated for ensuring a safety.
③ Aseptic touch control panel, all grouped in one place for easy access. (some
functions optional)
Control panel is controlling:
- Selection of chair Auto position:
Treatment position (1,2), zero position
- Mouth rinse position, Soft memory position
- Manual adjustment of chair position: Seat up/down, backrest up/down
- Memory of chair Auto position
- Control of chair movement speed
- Countdown timer
- On/off of Water spray of handpiece (even after instruments go back to holder,
last selected mode is memorized)
- On/off of fiber optic of high speed handpiece (even after instruments go back
to holder, last selected mode is memorized)
- On /off of Operating light

Taurus G2 specification
1/5
 - Control of speed range of micromotor
- Rotation direction of micromotor (clockwise / counterclockwise)
- Scaler working Mode (Normal / Latch)
④ 7’ LCD on control panel shows information related to instrument in use and chair
position / movement in symbolized icons. LCD displaying the power level of rotary
instruments in operation also.
⑤ Panel can be disinfected with alcohol.
⑥ Standard size (intraoral) x-ray film viewer attached
⑦ Silicone rubber sheet on the tray is autoclavable.
⑧ USB terminal is pre-made on a rear side of bracket table for easy connection to USB
devices

(5) Scaler
① EMS PIEZON KIT BUILT IN LED Optic FS-432 (optional)
② PIEZON KIT BUILT IN Non Optic FS-433 (optional)
③ Not installed (EMS scaler can be installed separately )

3) Assistant’s side element includes:

(1) Three-way syringe 1 ea.

① For air, water and spray
② Tip is removable and easily autoclavable
③ Silicone tube can be disinfected with alcohol.

(2) High volume evacuator---------------------- 1 ea.

① Lever for controlling suction volume
② Aseptic tube can be disinfected with alcohol
③ Available for central / air venturi suction
④ Easy to disassemble for cleaning. Vacuum valve 135℃ autoclavable

(3) Saliva ejector 1 ea.

① Lever for controlling suction volume
② Aseptic tube can be disinfected with alcohol
③ Available for central / air / water venturi suction
④ Easy to disassemble for cleaning. Ejector valve 135℃ autoclavable

(4) Detachable glass spittoon ------------------------------------------ 1 ea.

① Reinforced glass material
② Spittoon bowl can be detached for efficient and easy cleaning.
③ Spittoon bowl is flushed out with water automatically after cup filling (amount of water
for flushing can be adjusted)
④ Water warmer is mounted

(5) Assistant's instrument holder

① Swiveling for the best position
② Control panel is controlling
- Selection of chair Auto position:
Treatment position (1,2), zero position.
- Mouth rinse position, Soft memory position
- Manual filling of cup
Taurus G2 specification
2/5
 - Manual flushing of spittoon bowl
- Operating light on/off
③ Filter for HVE and Saliva ejector is located with easy in-out structure
2. Dental chair

(1) Type : Electro-Mechanical motor drive system

(Actuator: Hanning GmbH / Germany : noise-free | Speed controllable by users)

(2) Elevation range : Minimum. : 385 mm±10 mm

Maximum: 785 mm±10 mm

(3) Chair length : max.1748 ~ 1948mm

(4) Backrest angle adjustment :

0 ±2 degree reclines below horizontal for trendelenburg position.
70±2 degree upright for treatment and seated position. :

(5) Tilting :
All movements activated by means of one footswitch located on rear right or left side of chair.

(6) Chair Auto position includes:

Chair provides three programmable automatic positions:
① Treatment position 1
② Treatment position 2
③ Reset (zero) position

(7) Simple, aseptic chair housing.

(8) Chair has one footswitch for latest in asepsis design

(9) Contour design of chair provides excellent patient support.

(10) Upholstery :
- Seamless urethane material
- Can be disinfected with alcohol.

(11) Headrest (natural movement headrest) :

- The headrest's movement is precisely matched to the movement of the patient neck so there
is no uncomfortable sliding of the head.
- Seamless headrest upholstery
-
(12) Included electric main switch

(13) Emergency stop function

In case of emergency during chair’s movement to Auto position, any of following ways stops
chair’s movement (totally 7 ways).
- Turn OFF main switch
- Press any lever of foot controller
- Press main pedal of foot controller
- Press any switch related to chair position on dentist control panel
- Press any switch related to chair position on assistant control panel
Taurus G2 specification
3/5
 - Touch the rear side of chair elevation channel
- Push the backrest toward

3. Other parts

(1) Automatic cup filler 1 ea.

- Infrared beam sensor type Auto cup filler.
Sensor starting cup-filling when cup is placed. Cup filling is made for preset time (filling
time can be adjusted)
- Automatic cup filler works with paper or metal cups.

(2) Sanitation system for cleaning instruments’ water line

- Number of instruments to be garaged : 8ea
- Volume of sanitation solution: 1 liter

(3) Amalgam separator (DURR CAS1) * Option

(4) Operating lights 1 ea.

1) The LED light is post-mounted.
2) Auto-light function
- During chair’s movement for Auto position, light OFF automatically
- In case instruments are taken out from holder, light ON automatically
- On the moment chair gets to Auto treatment position, light ON automatically
3) Detachable, autoclavable light handle.
4) Light intensity: Max. 30,000 ±2,000 Lux
Low: 7,500 Lux Middle: 19,000 Lux High: 30,000 Lux
5) Color temperature: 4,200 ±2,000 Kelvin
6) Knob for adjusting Light pattern is mounted on rear side of light head.

(5) Foot controllers 1 ea.

- All manual movements of chair are also controllable with foot controller.
(Chair elevation range, Backrest angle)
- Control on-off for operating light.
- Control on-off for ultrasonic scaler
- Control handpiece speed.

(6) Operating stool *Option

1) ‘Sante stool’ (for dentist)

- Gas cylinder type, ergonomic type seat
- Backrest can be tilted ergonomically (tilting on/off and tension selectable by lever)
- Seamless upholstery: Easy cleaning with alcohol.
- Smooth operation 5 castors.
- Elevation Range : Min.460mm - Max.570mm
- Width: 540mm
- Weight: 14kg

2) ‘Taurus stool’ (for assistant)

Taurus G2 specification
4/5
 - Gas cylinder type, round type seat
- Seamless upholstery: Easy cleaning with alcohol.
- Smooth operation 5 castors.
- Elevation Range : Min.470mm - Max.620mm
- Width: 570mm
- Weight: 13.7kg

4. Electric Power : AC 220V, 60Hz. (Adjustable to local voltage)

5. Power consumption: 1.0 kVA

Taurus G2 specification
5/5