C32 Marine Engine RNY00001-UP(SEBP4767 - 22) - Documentation Page 1 of 3
Shutdown SIS
Previous Screen
Product: MARINE ENGINE
Model: C32 MARINE ENGINE RNY
Configuration: C32 Marine Engine RNY00001-UP
Disassembly and Assembly
C32 Marine and Auxiliary Marine Engines
Media Number -RENR8628-09 Publication Date -01/08/2011 Date Updated -24/08/2011
i03301251
Rocker Arm and Shaft - Install
SMCS - 1102-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 124-2946 Lifting Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 11/25/2016
C32 Marine Engine RNY00001-UP(SEBP4767 - 22) - Documentation Page 2 of 3
Illustration 1 g01188378
Illustration 2 g01325993
1. Position rocker arm shaft assembly (4) , valve rocker arms (3) , and electronic unit injector
rocker arms (1) as a unit with Tooling (A) on the cylinder head.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 11/25/2016
C32 Marine Engine RNY00001-UP(SEBP4767 - 22) - Documentation Page 3 of 3
Note: Apply clean engine oil to the underside of the bolt heads prior to installation.
2. Install bolts (2) and tighten to a torque of 50 ± 5 N·m (37 ± 4 lb ft) plus a 45 ± 5 degree
turn. Tighten the bolts in the following sequence: 2, 3, 4, 1.
3. Adjust the valve lash for the inlet valves and the exhaust valves. Refer to Testing and
Adjusting, "Engine Valve Lash - Inspect/Adjust".
4. Adjust the electronic unit injectors. Refer to Testing and Adjusting, "Electronic Unit
Injector - Adjust".
End By: Install the valve mechanism cover. Refer to Disassembly and Assembly, "Valve
Mechanism Cover - Remove and Install".
Copyright 1993 - 2016 Caterpillar Inc. Fri Nov 25 10:49:19 UTC+0700 2016
All Rights Reserved.
Private Network For SIS Licensees.
https://127.0.0.1:442/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/siswe... 11/25/2016
