ADLERWINDEN LLP Material Handling Systems Planetary

Spooling Winch

The new “E” series electric winches are designed to meet or exceed North American ANSI / ASME B30.7 standards while providing
optimum performance in a rugged, safe, and versatile package.
ADLERWINDEN LLP Winch with Planetary Mounting position: Horizontal STANDARD FEATURES
Gearboxes Fitting: ADLERWINDEN LLP’s winch is designed to • Heavy duty planetary gearbox
have proved highly successful under extreme be flange mounted in a fabricated steel • SC E IP 54 400 V AC / 3-phases / 50 Hz braked
operating conditions. Their principal features structure. The drive end mounting flange reacts motor
and most significant advantages are rope load and transmission torque, the non-drive • SC H; orbit or radial piston type hydraulic motor
• compact dimensions end reacts rope loads only and can be safely complete with brake valve
• ease of maintenance removes to facilitate fitting of the winch drum and • Steel drum with cable fixing point at flange
• long operation life gearbox. • Two drum supports
• high performance Backstop: For special applications a backstop • Double layer 2-component conservation
• modular design of gear unit can be incorporated between the gear according ISO 12944 category C2-Low, colour
• functional design transmission and the parking brake. It operates RAL 5010
With these characteristics the machine as follows. • FEM / ISO class: T4-L3-M5
designer will get a ready to install unit and will Lifting of load AVAILABLE OPTIONS
achieve economic solutions even in confined • Parking brake closed • Frequency inverter for variable speed control
space conditions. • Backstop open • Wireless radio remote control systems
Potential applications: Lowering of load • Limit switches (electric)
• mobile cranes • Parking brake open • Flange encoder
• construction cranes and conveyors • Backstop closed • Slack wire switches (electric)
• material and working elevators Geared limit switch • Proportional local or remote control valve
• loading and cargo handling cranes a) electrical (hydraulic)
• shipboard and deck cranes an electrical signal can be generated at various • Control box IP 55 with push-buttons and
• rescue and wrecker salvage trucks rope travel or end limit position. The switch emergency stop built acc
• dockyard and harbour cranes positions are infinitely adjustable. The switch is • Control box IP 66 with low-voltage IP 65 remote
• offshore cranes flange mounted with drive from the rope drum control built acc
• container gantries through the bearing support housing. • Load limiter (required by CE for applications
• access platforms b) hydraulic exceeding 1000 kg WLL.)
ADLERWINDEN LLP use components common ADLERWINDEN LLP geared limit switch AVAILABLE CONTROL OPTIONS
to our complete range (Winches, Slewing Units, operating as the electrical version – with a • Explosion-proof motors
Industrial Gears, Free Fall Winches) giving the hydraulic signal. • Primary brake on motor
advantage of volume production: cost savings Brakes: A hydraulic multi disc parking brake with • Stall Torque Motor
from standard parts, reduced lead times, tested spring applied, pressure release operation is fitted. • Protective steel motor cover
and proven designs across the whole range and This fail safe device is a self-contained piston/ brake • Drum pressure roller
readily available spares for units in service. with release pressure of 15 bar, 300 bar max. • Band brakes (manual or fail-safe automatic)
• Meets or exceeds ANSI / ASME B30.7 Line transient pressure of 0.5 bar permitted. • Manually disengaging clutch
• Lifting models with 18:1 D/d ratio (per ANSI / The connection ports are metric M 12 x 1.5. • Alternative speeds
ASME B30.7) Multi disc, single disc or barrel brakes with direct • Alternative supply voltages
• Pulling models with 15:1 D/d ratio (per ANSI / connection to the rope drum can be fitted for additional • Drum guards
ASME B30.7) safety back up. • Spooling gears
• 5:1 design factor Operating conditions: The gear systems are • Grooved drums
• Winch motors are high torque design, rated for designed for use in Central European conditions. • Manual emergency crank
continuous duty totally enclosed fan cooled (TEFC) Permissible oil temperatures -20°C to +70°C. • Alternative drum dimensions / split drums /
• All worldwide voltages Environmental factors such as salt water, salt- additional rope anchors / etc
• Wide selection of standard gear ratios and line laden air, dust, excessive air pressure, heavy • Warping head
speeds vibration, high shock loads and extreme • Marine / offshore coating systems
ambient temperatures, corrosive media, etc.
must be stated.
 Ratios from i = 21 to 29 Ratios from i = 45 to 147
Gearbox mounted inside winch drum, Gearbox mounted inside winch drum, Gearbox mounted inside winch drum,
Parking Brake and Hydraulic motor Parking Brake and Hydraulic motor Parking Brake and Hydraulic motor flange
mounted externally, twin motor/brake
output in opposite sense of rotation. output in opposite sense of rotation. option. Input and output in opposite
sense of rotation.

Drum Drum Drum

Rope Dia Rope Length Motor Line
Model Line Pull ID OD Length X B Y E A X1 Y1 C H ØM
Ød min max Power Speed
ØD ØD1 L

inch mm Mtrs Mtrs N Kw Mtr/min mm mm mm mm mm mm mm mm mm mm mm mm mm

A-25 1/4" 6 10 21 2,500.00 0.37 0.1 - 18 95 119 189 140 250 170 200 24 108 190 13

A-100 3/8" 10 12 38 10,000.00 1.50 0.1 - 18 160 220 225 135 235 170 220 50 140 240 14

A-200 1/2" 14 16 51 20,000.00 5.50 0.1 - 35 250 334 270 170 282 310 400 50 210 395 22

AJ-300 5/8" 16 20 63 30,000.00 11.00 0.1 - 40 300 396 323 510 610 410 500 80 270 470 22

AJ-700 3/4" 20 30 95 70,000.00 15.00 0.1 - 40 350 470 516 510 610 410 530 80 270 505 22

AJ-1300 7/8" 22 35 110 1,30,000.00 22.50 0.1 - 30 400 532 581 550 920 670 625 125 335 275 350 660 28

AJ-2000 1 26 40 173 2,00,000.00 22.50 0.1 - 18 450 658 696 650 895 780 940 121 350 390 490 940 28

AX-300K 1 1/8" 28 45 194 3,00,000.00 30.00 0.1 - 18 500 724 760

AX-500K 1 3/8" 36 50 216 5,00,000.00 30.00 0.1 - 12 650 938 836

AX-700K 1 1/2" 38 50 215 7,00,000.00 37.00 0.1 - 12 700 1004 820

AX-1100K 1 3/4" 44 50 216 11,00,000.00 45.00 0.1 - 10 800 1152 830

CUSTOM
AX-1300K 1 7/8" 48 50 216 13,00,000.00 45.00 0.1 - 8 850 1234 851

AX-1500K 2 52 50 216 15,00,000.00 55.00 0.1 - 8 900 1316 870

ADLERWINDEN LLP
MATERIAL HANDLING SYSTEMS
45A, Chanditala Road, Sodepur,
North 24 Parganas, Kolkata – 700110,
West Bengal, India
sales@adlerwinden.in
www. adlerwinden.in
Ph: +91 86970 62377