Scribd
Upload
352 views2 pages

USB/RS232 Electric Field Probes

The document summarizes the technical specifications of the PMM EP-600 and EP-601 USB/RS232 Electric Field Probes, which are miniature optically coupled broadband E-field probes that feature a 10 kHz to 9.25 GHz frequency range, 60 dB dynamic range, fiber optic communication up to 40 meters, and up to 80 hours of battery operation on a single charge. The probes are extremely lightweight at only 25 grams and have a exceptionally small spherical symmetrical configuration combined with excellent RF characteristics, making them ideal for EMC/EMI and other applications requiring minimal interference and fast, accurate field measurements.

Uploaded by

Ciro Egoavil
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
352 views2 pages

USB/RS232 Electric Field Probes

The document summarizes the technical specifications of the PMM EP-600 and EP-601 USB/RS232 Electric Field Probes, which are miniature optically coupled broadband E-field probes that feature a 10 kHz to 9.25 GHz frequency range, 60 dB dynamic range, fiber optic communication up to 40 meters, and up to 80 hours of battery operation on a single charge. The probes are extremely lightweight at only 25 grams and have a exceptionally small spherical symmetrical configuration combined with excellent RF characteristics, making them ideal for EMC/EMI and other applications requiring minimal interference and fast, accurate field measurements.

Uploaded by

Ciro Egoavil
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PMM EP-600 & EP-601 USB/RS232 Electric Field Probes

The all-in one that sets the standard for

miniature optically coupled broadband E-field Probes Main features


10 kHz to 9.25 GHz frequency range 60 dB dynamic range: 0,14 - 140 V/m (EP-600); 0,5 - 500 V/m (EP-601) Symmetrical dipoles configuration Excellent isotropy (0.3 dB typical) Up to 40 meters communication by Fiber Optic Cable Up to 80 hours of operation before recharging High performance, high reliability Li-Mn battery PC direct connection via Optical to RS232/USB adapters Extremely lightweight: only 25 g!
Exceptionally small-sized spherical symmetrical configuration, lightweight and miniaturized electronics combined with excellent RF characteristics make PMM EP-600 and EP-601 RF Electric Field Probes the ideal solutions for all EMC/EMI applications (chambers and TEM/GTEM cells), biology and materials research and wherever fast and accurate measurements with negligible or minimum interference of the probe to the field under measure are essential. Accredited calibration provided.

Technical Specifications
Frequency range Flatness EP-600 100 kHz 9.25 GHz With frequency correction OFF 1 150 MHz: 0.8 dB 0,5 6000 MHz: 1,6 dB 0,3 7500 MHz: 3,2 dB EP-601 10 kHz 9.25 GHz With frequency correction OFF 0,1 150 MHz: 0,4 dB 0,05 6000 MHz: 1,6 dB 0,03 7500 MHz: 3,2 dB

Dynamic range Linearity Resolution Sensors Isotropicity Overload Measured data Sampling Sampling rate Digital filter Internal battery Operation time Recharging time Internal data memory Communication Fiber optic connector Fiber optic lengths EP-600 mounted on tripod RF-transparent tip Fiber optic to PC connection PC Software Operating temperature Temperature reading Battery voltage reading Dimensions Weight Probe mount

Typical with frequency correction ON Typical with frequency correction ON 0,3 7500 MHz: 0,4 dB 0,05 7500 MHz: 0,4 dB Single range 0,14 140 V/m (60 dB) Single range 0,5 500 V/m (60 dB) 0,4 dB @ 50 MHz / 0,3 100 V/m 0,4 dB @ 50 MHz / 1 500 V/m 0,01 V/m 6 monopoles 0,5 dB (0,3 dB typical) (@ 50 MHz) 0,5 dB (0,3 dB typical) (@ 50 MHz) 300 V/m 1000 V/m X-Y-Z axis Simultaneous on X-Y-Z axis 22 S/s to 0,03 S/s, depending on filter setting 2,3 to 28 Hz, low-pass, presettable 3 V - 5 mAh, rechargeable Li-Mn 80 hours @ 0,4 S/sec., 28 Hz filter 60 hours @ 5 S/sec., 28 Hz filter 48 hours for full operation time Serial number - Calibration date - Calibration Factors - Firmware version Bidirectional Fiber optic link HFBR-0500 10 m, standard 20 / 40 m as options Fiber optic to RS232 converter RS232 to USB converter Display of field, temperature and battery voltage measurements Setting of filters, sampling rate, frequency -10C +50C 0,1 C resolution 10 mV resolution 53 mm overall (body, 17 mm dia.; sensor, 17 mm) 25 g, including 1 m Fiber optic pigtail 20 UNC female

Ordering information
EP-600 EP-601 Supplied with: - 10 m fiber optic cable - optical/RS232 adapter + RS232/USB adapter - PC Utility Win-EP600 to display total field and setup - battery charger Field probe 100 kHz 9,25 GHz, 0,14 140 V/m Field probe 10 kHz 9,25 GHz, 0,5 500 V/m

Optional accessories
Preliminary specifications subject to changes without prior notice 04/09

FO-EP600/20 FO-EP600/40 SB-10

Fiber optic cable, 20 m Fiber optic cable, 40 m Programmable switching box, 10 inputs

a brand of

narda Safety Test Solutions


an

3 Communications Company

Narda Safety Test Solutions srl Via Leonardo da Vinci, 21/23 20090 Segrate (MI) ITALY Phone: +39 02 26 998 71 Fax: +39 02 26 998 700 E-Mail: support@narda-sts.it www.narda-sts.it

You might also like