Product Guide

Imagination to Creation

Print&Cut
The information in this document is subject to change without notice.

Mimaki Europe B.V. 07-03-2019

Sign Graphics Products V1.61EU
 Terms of use
• The contents of this presentation are intended only for Mimaki authorized
resellers. Authorized persons are not permitted to distribute, copy or change
this presentation without explicit approval of Mimaki Europe B.V.

• Contents and technical explanations in this presentation are based on the

test results achieved at Mimaki at the time of testing and are not a guarantee
for performance. Substrates should be tested beforehand.

• In addition, the contents in this presentation do not lead to any legal

obligations from Mimaki and Mimaki does not take any responsibility. Please
verify in advance whether your intended prints will result in sufficient
quality.

• Contents of this presentation are subject to change without prior notice for
improvement. Compositors errors reserved.

Mimaki Europe B.V. 2

Sign Graphics Products
 Features
• Maximum print speed of 105.9 sqm/h with SS21 inks
• High productivity with the staggered dual-heads design and high
densities

• SS21’s silver ink expresses unforeseen high-intensity metallic

• SS21’s silver ink has a 67% higher reflection level, compared to
conventional silver ink
• Easy color matching with the Metallic color collection
includes 756 metallic colors

• High fidelity color reproductions with Orange ink & Light

Black ink
• Wider color gamut printing by orange ink allows printing corporate
colors
• Light black ink produces accurate grayscale printing without color
shifts

Mimaki Europe B.V. 3

Sign Graphics Products
 Features
• High quality printing by Mimaki’s original technologies
• Smooth image quality by waveform control and precise dot placing
technology
• Variable dot printing by 3 different drop sizes of small/middle/large
• Mimaki’s proprietary 3-way intelligent heater optimizes dot sizes
• MAPS3 eliminates banding and delivers smooth print densities

• A wide variety of Print&Cut functions

• Continuous crop mark detection for unattended, high quality P&C
operation
• Zero margin crop mark eliminates margins between crop marks,
reducing media waste
• Cut & Print allows for high quality finish, when using thin media such
as heat transfer media
• Over cut and Corner cut functions cut edges sharp even when using
thick media

Mimaki Europe B.V. 4

Sign Graphics Products
 System configuration

Connection
USB 2 0
5m(15ft) cable is recommended
PC
Recommended PC configuration

CPU: Core i5 3.5GHz Including Rip software

Memory: 8GB
HDD: 500GB
I/F : USB2.0, 4 ports or more
ODD: DVD-ROM
Network: 1000BASE-T
Compatible OS: Windows Vista(32/64bit)
Windows 7(32/64bit)
Windows 8(32/64bit)
Windows 10(32/64bit) Options
Monitor: 1366x768
MBIS3
Works also with: Drying fan
Air exhaust unit
Static prevention sheet
Front cover
8x Eco-cartridge for 600ml BS3/BS4 inks

Mimaki Europe B.V. 5

Sign Graphics Products
 Ink Type / Ink Set
SS21 ES3 BS3 / BS4* Sb53 Sb54
Ink type Eco Solvent
Eco Solvent Solvent Sublimation Sublimation
(Low odor)

Colors 10C* 6C 4C 6C* 4C

6C+WSi: Silver included 4C: High speed printing 4C: High speed printing 4C: High speed printing 4C: High speed printing
M C Y K K Y C M M C Y K K Y C M MT BLT YT KT KT YT BLT MT

4C: High speed printing 6C: Smooth Result 6C: Smooth Result
M C Y K K Y C M

8C: Smooth result &

vibrant expression
M C Y K Lc Lm Lk Or

Ink Sets 6C+WW: 6C plus white

printing

Lk/Or/W/Si included
M C Y K Lk Or W Si

Lk/Or/W 2 included
M C Y K Lk Or W W

MCYKLcLmLkOr:
Ink - 440ml cartridge - 440ml cartridge - 600ml Ink pack - 440ml cartridge
Capacity - 2L Ink pack (for MBIS3) (with Eco-cartridge) - 2L Ink pack (for MBIS3) 2L Ink pack (for MBIS3)
WSi: 220ml cartridge - 2L Ink pack (for MBIS3)

*Up to 8 colors can be

* *BS4 has low odor *K is also available
set out of 10 colors.

Mimaki Europe B.V. 66

Sign Graphics Products
 Print heads configuration
• Staggered dual-head design
• The 2 print heads, positioned in a staggered configuration, make high speed
printing possible
• Capable of ejecting 7 different drop sizes of 4pl/7pl/8pl/14pl/16pl/24pl/35pl

1-head:1440-nozzle
(180-nozzle x 8-lines) Staggered Dual-head design

1 2 3 4 5 6 7 8

Nozzle row length

Approx.25.4mm
(1 inch)
1 2 3 4 5 6 7 8
Approx.
50.8mm
(2 inch) Nozzle width
Approx.31mm
(1.2 inch)

Approx. 101mm (3.9 inch)

Mimaki Europe B.V. 7

Sign Graphics Products
 Highly versatile printer
• Larger ink drop
• 3 different drop sizes are automatically selected from 7drop sizes, depending
on the selected print quality (profile)
• When working with SS21, the 7 drop sizes are 4pl,7pl,8pl,14pl,16pl,24pl, and 35pl
• For high speed printing with high densities, the variable dot technology with a maximum
dot size of 35pl is used for the highest productivity of 105.9m²/h with SS21/BS3/BS4, and
112.5m²/h with SB53/SB54
• This gives the printer a wide coverage, from high resolutions with high qualities to low
resolution printing, with higher densities

Case 1 : Maximum dot size =21pl Case 2 : Maximum dot size =35pl
1 /360 inch
1 /360 inch

Large Large
1 /360 1 /360
inch 21ｐｌ inch 35ｐｌ
Middle Middle
14ｐｌ 14ｐｌ
Small Small
4ｐｌ 4ｐｌ

Low density due to an gap between the dots High density with no gap between the dots
↓ ↓
Not suitable for high speed mode (low resolution) Suitable for High speed mode

Mimaki Europe B.V. 8

Sign Graphics Products
 Print Speed, SS21/BS3/BS4, 4C ink set

• Ink set: 4C (CMYK) Banner

Super Draft 105,9
PVC *
360x360,1P,Bi 92,1

Draft 32,7 Draft 69,2

* *
540x720,4P,Bi 28,4 540x360,2P,Bi 60,2

High Speed 24,6 High Speed 45

540x720,6P,Bi 21,4 540x360,3P,Bi 39,2

Standard① 20,2 Standard① 32,7

** *
720x1080,6P,Bi 17,6 540x720,4P,Bi 28,4

Standard② 15,4 Standard② 29,5

**
720x1080,8P,Bi 13,4 720x720,4P,Bi 25,7

High Quality① 10,4 High Quality① 20,2

**
720x1440,12P,Bi 9,0 720x1080,6P,Bi 17,6

High Quality② 7,9 High Quality② 15,4

720x1440,16P,Bi 6,9 720x1080,8P,Bi 13,4
CJV300-160 CJV300-160
Super Smooth 4,3 Super Smooth 12,5
1440x1440,16P,Bi 3,7 CJV300-130 720x1440,10P,Bi 10,9 CJV300-130

0 20 40 60 80 m²/h 0 50 100 150 m²/h

* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work

The print modes shown in this document are the performance of the printer itself. The profiles are created selectively depending on the media type. When the
profile is not available, use MPM-3 to create the profile for the media.

Mimaki Europe B.V. 9

Sign Graphics Products
 Print Speed, SS21, 8C/6C ink set
• Ink set: - 6C(CMYKLcLm+WW/WSi) or (CMYKOrLk+WW/WSi)
- 8C(CMYKLcLmLkOr)
Banner
Super Draft 50,5
*
360x360,2P,Bi 43,9
PVC
Draft 22,7 Draft 33,9
*
540x360,6P,Bi 19,7 540x360,4P,Bi 29,5

High Speed 17,4 High Speed 22,7

* 540x720,8P,Bi 15,1 540x360,6P,Bi 19,7

Standard① 10,5 *
Standard① 17,4
**
720x1080,12P,Bi 9,1 540x720,8P,Bi 15,1

Standard② 7,9 **
Standard② 10,5
720x1080,16P,Bi 6,9 720x1080,12P,Bi 9,1

High Quality 5,3 High Quality 7,9

720x1440,24P,Bi 4,6 720x1080,16P,Bi 6,9
CJV300-160
CJV300-160
Super Smooth 1,9 Super Smooth 5,3
1440x1440,32P,Bi 1,7 CJV300-130 720x1440,24P,Bi 4,6 CJV300-130

0 5 10 15 20 25 30 35 40 m²/h 0 20 40 60 m²/h

* MAPS works with “Quality priority” setting in RasterLink6

** MAPS does not work

Mimaki Europe B.V. 10

Sign Graphics Products
 Print Speed, SS21, silver ink set

• Ink set: 6C (CMYKLcLm+WSi) / (CMYKLcLm+WSi)

1-layer printing Metallic color printing
(Silver only) (Silver→Color)

7,9 High Speed 3,5

High Speed *
720x1080,16P,Bi 720x1080,12P,Bi 3,0
6,9

6,3 Standard 1,58

Standard
720x1440,20P,Bi 720x1080,16P,Bi 1,4
5,5

3,9 High Qulaity 0,78

High Qulaity
720x1440,32P,Bi 720x1440,32P,Bi 0,7
3,4

0,38 CJV300-160
Super Smooth 1,9 CJV300-160 Super Smooth
1440x1440,32P,Bi 1440x1440,32P,Bi 0,3
1,7 CJV300-130
CJV300-130

0 5 10 15 m²/h 0 1 2 3 4 5 m²/h

* MAPS does not work

Mimaki Europe B.V. 11

Sign Graphics Products
 Print Speed, SS21, White ink set

• Ink set: 6C+WW/WSi (CMYKLcLm/CMYKOrLk+WW/Wsi)

1-layer printing 2-layer printing
(White only) (Color → White / White → Color)
High Speed 10,5
*
9,1 High Speed 3,1
720x1080,12P,Bi
720x1080,14P,Bi 2,7
Standard 7,1 Standard 2,3
720x1080,18P,Bi 6,2 720x1080,18P,Bi 2,0
High Quality 3,9 High Quality 1,3
720x1440,32P,Bi 3,4 720x1440,32P,Bi 1,1
CJV300-160 Super Smooth CJV300-160
Super Smooth 1,5 0,5
1440x1440,32P,Uni 1,3 CJV300-130 1440x1440,32P,Uni 0,4 CJV300-130

0 5 10 15 m²/h 0 5 10 15 m²/h

* MAPS does not work 3-layer printing

(Color → White → Color)
High Speed 2,3
720x1080,18P,Bi 2,0
Standard 1,3
720x1080,24P,Bi 1,1
High Quality 0,8
720x1440,32P,Bi 0,7
CJV300-160
Super Smooth 0,3
1440x1440,32P,Uni 0,3 CJV300-130

0 5 10 15 m²/h

Mimaki Europe B.V. 12

Sign Graphics Products ㎡/h
 Print Speed, ES3: 4C ink set
PVC Banner
Draft 105,9
* 360x360,1P,Bi 92,1

High Speed① 24.6 *

Billboard 69,2
540x720,6P,Bi 21.4 540x360,2P,Bi 60,2

High Speed② 17,8 High Speed① 33,9

540x720,8P,Bi 15,5 540x360,4P,Bi 29,5

Standard① 12 High Speed② 22,7

720x1080,10P,Bi 10,4 540x720,6P,Bi 19,7

Standard② 8,8 Standard① 20,2

720x1080,14P,Bi 7,7 720x720,6P,Bi 17,6

High Quality① 6,9 Standard② 12.5

720x1440,18P,Bi 6,0 720x1080,10P,Bi 10.9 CJV300-160
CJV300-160
High Quality② 4.0 CJV300-130 High Quality 10,4 CJV300-130
720x1440,32P,Bi 3,5 720x1440,12P,Bi 9,0

Super Smooth 1.9 Super Smooth 7,7

1440x1440,32P,Bi 1,7 720x1440,16P,Bi 6,7

0 30 60 90 120 m²/h 0 30 60 90 120 m²/h

* MAPS works with “Quality priority” setting in RasterLink6

The print modes shown in this document are the performance of the printer itself. The profiles are created selectively depending on the media type. When the
profile is not available, use MPM-3 to create the profile for the media.

Mimaki Europe B.V. 13

Sign Graphics Products
 Print Speed, ES3: 6C ink set

PVC Banner
Draft 50,5
* 360x360,2P,Bi 43,9

High Speed① 22,7

540x360,6P,Bi 19,7
High Speed① 17.4
* 540x720,8P,Bi 15.1 High Speed② 17,4
*
High Speed②
540x720,8P,Bi 15,1
12,5
540x720,12P,Bi 10,9
Standard① 14,6
Standard① 8,8
7,7
540x720,10P,Bi 12,7
720x1080,14P,Bi

Standard② 7,9 Standard② 8,8

720x1080,16P,Bi 6,9
720x1080,14P,Bi 7,7
High Quality① 5,3
720x1440,24P,Bi 4,6
High Quality 6,7 CJV300-160
High Quality② 4 720x1440,18P,Bi 5,8 CJV300-130
CJV300-160
720x1440,32P,Bi 3,5
CJV300-130
Super Smooth 1.9
Super Smooth 1,9
1440x1440,32P,Bi 1,7 1440x1440,32P,Bi 1,7

0 20 40 60 m²/h 0 20 40 60 m²/h

* MAPS works with “Quality priority” setting in RasterLink6

Mimaki Europe B.V. 14

Sign Graphics Products
 Outstanding Speed, Sb53 inks

• Sb53 4C and 6C printing speeds

BMYDk(K) BMYDk(K)LbLm
Super Draft 112,5
*
360x360,1P,Bi 97,9

Draft Draft 58
72
*
540x360,2P,Bi 62,6
* 360x360,2P,Bi 50,5

High Speed① High Speed① 36,7

48,6
540x360,3P,Bi 42,3
*
540x360,4P,Bi 31,9

High Speed② 32,7 High Speed② 24,3

*
540x720,4P,Bi 28,4 540x360,6P,Bi 21,1

Standard① 29,5 Standard① 17,4

**
720x720,4P,Bi 25,7 *
540x720,8P,Bi 15,1

Standard② 20,2 Standard② 10,5

**
720x1080,6P,Bi 17,6 720x1080,12P,Bi 9,1

High Qulaity 15,4 High Quality 7,9

720x1080,8P,Bi 13,4 JV300-160 720x1080,16P,Bi 6,9
JV300-160
Super Smooth 12,5 JV300-130 Super Smooth 5,3 JV300-130
720x1440,10P,Bi 10,9 720x1440,24P,Bi 4,6

0 50 100 150 m²/h 0 20 40 60 80 m²/h

* MAPS works with “Quality priority” setting in RasterLink6
** MAPS does not work
The print modes shown in this document are the performance of the printer itself. The profiles are created selectively depending on the media type.
When the profile is not available, use MPM-3 to create the profile for the media.

Mimaki Europe B.V. 15

Sign Graphics Products
 Sb53 inks
• 2 different types of black ink
• 2 types of black ink are offered to meet customer's demand

Type Advantage Disadvantage

• Less smoke generation during heat • When printing with 100%, the density is
Sb53-K transfer the same as Dk ink, but the density is
• Less grainy results can be seen at lower in the areas with low gradations
the low gradation areas
• Grainy results can be seen at the low
Sb53-DK • Reflection density is higher at the gradation areas
low gradation part • More smoke generation during heat
transfer, compared to the K ink

Mimaki Europe B.V. 16

Sign Graphics Products
 Outstanding Speed with Sb54 inks

• Sb54 4C printing speeds

KT,BLT,MT,YT
Super Draft 112,5
360x360,1P,Bi 97,9

Draft 72
540x360,2P,Bi 62,6

High Speed① 48,6

540x360,3P,Bi 42,3

High Speed② 32,7

540x720,4P,Bi 28,4

Standard① 29,5
720x720,4P,Bi 25,7

Standard② 20,2
720x1080,6P,Bi 17,6

High Qulaity 15,4

720x1080,8P,Bi 13,4 JV300-160
Super Smooth 12,5 JV300-130
720x1440,10P,Bi 10,9

0 50 100 150 m²/h

Mimaki Europe B.V. 17

Sign Graphics Products
 High-intensity silver ink (SS21)
• The SS21 silver ink expresses shiny finish
• Brightness does not become lower even after laminate film is applied*
• Brightness even after 3-year acceleration test is better than ES3

Brightness comparison Outdoor resistance comparison

①Laminated
②Initial brightness of ES3 is set as 100%.
ES3 w/laminate SS21w/laminate SS21w/o laminate 200%
SS21
167%
ES3
150% 137%
123%
100% 105%
100%

65%
50%
50% 39%
① ES3: Metallic gloss level gets lower when laminated
② SS21: Gloss level is maintained even with laminate
0%
Initial
初期 1-year
1年相当 2-year
2年相当 3-year
3年相当
Media: Avery MPI 2000
Laminate Film Avery DOL2060 • Initial brightness of SS21 is 67% higher than ES3
• Brightness of SS21 after 3-year acceleration test is still 5%
*1The scratch resistance of SS21 silver ink is poor, laminate is advised higher than ES3’s initial value

Mimaki Europe B.V. 18

Sign Graphics Products
 3-type metallic color collection
• Metallic color is expressed by printing color on silver
• 648 metallic colors designed for easy color matching
• Target metallic color can be selected from swatch library
• 3-type metallic color collection Type B: Booklet

Type A: Chart

Type C: Patch

*Each type of metallic color collection has the same colors.

3-type metallic color collections are available in RL6

Mimaki Europe B.V. 19

Sign Graphics Products
 Metallic color collection: Orange edition (SS21)

• Orange ink edition is added to SS21 metallic color

collection’s ink set CMYKOrLk+Wsi,
• For printing brighter metallic colors

Metallic Color Collection incl. Or ink edition

• SS21 C,M,Y,K,Or,Lk+W,Si Ink set
• 108 colors added!
Red/Orange colors are added
• There are total 756 colors including the regular metallic colors

Type B and C

Mimaki Europe B.V. 20

Sign Graphics Products
 Stunning quality
• Wider color gamut with the new SS21 Orange ink
• Orange ink is added as a process color
• Covering approx. 94.8% of the PANTONE coated color chart, 7% more
than only with 4C
• The large color gamut makes it easy to reproduce corporate colors,
etc.

M C Y K Lc Lm Lk Or

M C Y K Lk Or W Si
M C Y K Lk Or W W

Mimaki Europe B.V. 21

Sign Graphics Products
 Stunning quality

• SS21 with Orange ink

Gamut comparison Comparing print results
120

100
C,M,Y,K,Lc,Lm C,M,Y,K,Lc,Lm,Lk+Or
80

60

40

20

0
-120 -100 -80 -60 -40 -20 0 20 40 60 80 100 120
-20

-40

-60
Less bright orange High reproducibility with
CMYKLcLmLkOr
-80
color brighter orange color
CMYK
-100
Colors of PANTONE
PANTONE近似色
-120

*PANTONE solid chips coated(1085 colors)

Mimaki Europe B.V. 22

Sign Graphics Products
 Stunning quality
• SS21 with Light Black ink
• High quality monochrome color reproduction with the new Light Black ink
• Smooth color balance without color shifting, reproducing high quality,
smooth gray output

CMYKLcLm CMYKLcLmLkOr CMYKLcLm CMYKLcLmLkOr

• Reddish gray • No color shift and • Reddish gray • Smooth skin tone
smooth gradation • Skin with grainy
appearance

Mimaki Europe B.V. 23

Sign Graphics Products
 Stunning quality
• High density White ink
• Vivid color printing even on transparent/colored media by under-
laying white ink before printing the colors
• Higher opacity is attained by using an larger ink droplet

Density comparison (White - single layer)

Older generation printers CJV300

Density: 48% UP
Productivity: 430% Up

Transmission density: 0.27 Transmission density: 0.40

Print mode: 720x1440,32P,Bi Print mode: 720x1440,32P,Bi

Productivity: 0.9m²/h Productivity: 3.9m²/h *White – 200% print
Maximum drop size: 14pl Maximum drop size: 24pl *Light-up, Mimaki logo underneath
Media: PET Media: PET

Mimaki Europe B.V. 24

Sign Graphics Products
 Stunning quality
• Waveform control technology for high quality printing
• High accuracy dot placement, jetting ink drops in straight lines, with almost
perfect round dots
• Generating less mist, printing clear and sharp letters, lines, edges, and etc.
• Waveform is optimized to reduce the risk of missing nozzles

Mimaki Europe B.V. 25

Sign Graphics Products
 Stunning quality

Ejects ink not straightly and Ejects ink in straight lines

not with a perfect circle with a near-perfect circle

Ink dots overlap and no accurate dot placement Ink dots do not overlap and gives
↓ an accurate dot placement
Grainy appearance and uneven density ↓
No grainy appearance

Mimaki Europe B.V. 26

Sign Graphics Products
 Stunning quality
• Variable ink Dot Technology
• Printing with 3 different dot sizes, small, medium and large
• Delivers a high image printing quality, with very smooth gradations
• 3 different drop sizes are selected from 4pl/7pl/8pl/14pl/16pl/21pl/29pl/35pl,
depending on the type of ink and the selected print mode
• This allows printing in not only high resolution printing, for high quality, but
also high speed & high density printing for high productivity!

Variable dot

Normal dot

Mimaki Europe B.V. 27

Sign Graphics Products
 Stunning quality
• 3-Way Intelligent Heater plus Top Blower
• Optimizes the dot gain
• Generates a higher print quality without bleeding, by a quick and accurate
ink dot fixing, which is attained by heating the media to a perfect
temperature through the Pre- and Print heaters
• The Post-heater provides additional drying after printing
• The top blower assists drying the ink on the media surface, to support
high speed/density printing
Top blower
3-way Intelligent Heater patent No.
Incorporated air-flow
path to support faster
Japan 4889059 Heater cover drying
USA 8.444.262 Print-head Print- heater
China ZL 200910222559.8 Post-heater
Pinch roller
Larger Post-heater to
ensures faster drying
Pre-heater

Grid roller

Mimaki Europe B.V. 28

Sign Graphics Products
 Stunning quality
• MAPS3 (Mimaki Advanced Pass System 3)
• MAPS3 prints passes in gradation-like tone, by dispersing ink drops
between the passes, which reduces banding, uneven drying ink, and
bidirectional stripes
• MAPS3 works in the higher pass modes of each resolution
MAPS3 Normal Pass

Mimaki Europe B.V. 29

Sign Graphics Products
 Continuous operation
• NCU (Nozzle Check Unit)
• Stable printing quality, by preventing printing with clogged nozzles
• NCU checks the nozzle condition automatically per transferred file or
the set print length
• When clogged nozzles are detected, the cleaning is started
automatically
• When the clogged nozzle is not recovered by
cleaning, the Nozzle Recovery System works
automatically, and printing starts

Mimaki Europe B.V. 30

Sign Graphics Products
 Continuous operation

• NCU (Nozzle Check Unit)

The NCU unit NCU operation flow
Nozzle check 1. After printing one file
setup 2. After printing the set print length
Print head
Ink ejection by each nozzle line
Checks nozzles
The number of the
retrying cleaning can
All nozzles are checked per
be changed.
nozzle line

Light Nozzle Missing Cleaning is done automatically

emitter Receiver Yes/No
Yes
When missing nozzles
No could not be recovered
after retrying cleaning.
Sensor:
Nozzle recovery
Receiver detects a light → no ink drop →Cleaning Start printing
is then automatically set
When the number of missing
nozzles is higher than the number
in the setup
Warning (Standby)
Nozzle check duration: 50sec./check
Nozzle check ink consumption: 192 cc/year*
*Operating Condition: One check/hour x 10-hour operation/day x 240-day

Mimaki Europe B.V. 31

Sign Graphics Products
 Continuous operation
• NRS (Nozzle Recovery System)
• Increases the uptime
• Replaces missing nozzles, by working nozzles in other passes
• No need for direct service intervention
• Makes printing with the same quality possible, even if nozzles are
missing

Continuous printing by NRS

Down Time Continuous operation

Mimaki Europe B.V. 32

Sign Graphics Products
 Continuous operation

• NRS (Nozzle Recovery System)

Nozzle check pattern Register the number

of missing nozzles

Clogged/Missing
nozzles

Replacing the clogged nozzles by

using other working nozzles

• 10 nozzles can be registered per 1 nozzle line

• NRS does not change the printing speed
• NRS does not work when:
• Printing in low pass modes
• Printing in some modes with MAPS3
• The position of the nozzle is not correct

Mimaki Europe B.V. 33

Sign Graphics Products
 Continuous operation
• Automatic Wiper Cleaning
• The ink on the wiper is automatically removed during the cleaning
procedure of the print head
• No pollution on the print head caused by ink residue from the wiper
• Easier daily maintenance as the wiper is cleaned automatically

1. Washing liquid

Wiper Cleaner

2. Wipe out

Mimaki Europe B.V. 34

Sign Graphics Products
 Continuous operation
• Event mail
• Status of the printer can be sent from the printer to a mobile phone
via the internet
• For remote status indication of the printer

Internet

Print start/finish
error/warning

Email receiving device

Mimaki Europe B.V. 35

Sign Graphics Products
 Continuous operation
• MCT (Mimaki Circulation Technology)
• Stable white and silver ink supply to the print heads
• Circulating the white and silver inks in the ink line system
• Preventing the settlement of pigments
• MCT works only when the white and silver inks are installed
Ink lines

Pump
Ink lines
Circulates the white and
silver ink through the lines

Pump
1 234 5 67 8

1 234 5 67 8

Mimaki Europe B.V. 36

Sign Graphics Products
 Continuous operation
• Ink Supply Systems
• UISS (Uninterrupted Ink Supply System)
• In 4C ink set, when the ink runs out, ink is automatically
supplied from the other cartridge for continuous operation
• Not available with 6C+Wsi/6C+WW/8C ink set
• When using the Sb53 6C ink set, UISS works with M and Bl

• Non-stop ink replacement

• Working with the 4C ink set, an empty ink cartridge can be replaced with
a new one, without stopping the on-going print job
• No waste of time and media or ink
• Not available with 6C+Wsi/6C+WW/8C ink sets

• Optional MBIS3 (Mimaki Bulk Ink System 3)

• Large volume 2L ink packs are placed directly on
the ink station
• Making it possible to print continuous large jobs
• The new MBIS3 on the printer saves working space,
and large 2L ink pack saves running cost

Mimaki Europe B.V. 37

Sign Graphics Products
 Media feeding and take-up
• Media of up to 40kg can be used
• The take-up roll unit of CJV300 has a strong torque to feed media of 40kg

• Maximum diameter of up to 250mm

• The height of the take-up roll unit is 17cm, which is high
enough to roll up media of a diameter up to 250mm

• Prints one roll of media with high feeding accuracy

• The diameter of the taken-up media is measured by a sensor
• This keeps the tension of the media constant Take-up roll switch
For manual operation
press the button to roll
up the media.

Mimaki Europe B.V. 38

Sign Graphics Products
 A wide variety of Print&Cut functions
• Half cut / Die cut / Dotted line cut
Half cut Die cut Dotted line cut

Cut out figures leaving backing Cuts through the backing Cuts a series of half and die cuts
sheet. sheet to cut out the leaving a few minimal joints.
individual figures.

• Continuous Crop Mark Detection

• A maximum of four crop marks are
automatically and continuously detected so
that printed images are accurately cut,
compensating for distortion in each image

Mimaki Europe B.V. 39

Sign Graphics Products
 A wide variety of Print&Cut functions
• Zero margin crop mark*
• When copying data using the crop mark, users can make the margins
between the crop marks to zero. It enables to save time and also reduce
media waste without loosing the cutting accuracy.
Zero margin crop mark Conventional crop mark

Eliminates unused media 4mm - 10mm space

Reference
When Printing and cutting 100 data of 100×100mm
(1) Conventional Crop Mark, 4 points, 59min.10sec. (about 1.4㎡)
(2) Zero margin crop mark, 42min.42sec. (about1.2㎡)
Zero margin crop mark Conventional Crop Mark

*Possible with FW Ver.1.4

Mimaki Europe B.V. 40

Sign Graphics Products
 A wide variety of Print&Cut functions
• P&C/C&P without crop mark
• The unused media is minimized (zero) to reduce the waste

Zero margin crop mark Without crop marks

Unused Space FFF Minimize dead space

FFF
FFF
• Segment compensation Segment③

• Intermediate crop marks of the

Intermediate
crop mark
feed direction are detected, enabling Segment②

four-point corrections for each segment Intermediate

•
crop mark
This leads to accurate, long-length Segment①
cutting, even if the image is distorted

Mimaki Europe B.V. 41

Sign Graphics Products
 A wide variety of Print&Cut functions
• Over cut
• By overlapping the start and the end point, cutting is done without uncut
parts
• Effective when cutting thick or sticky media as well as the ones easy to
bend
• Corner cut
• The edge of the blade overlaps at other corners
• By using Corner cut, the corners are cut sharp
Over cut Corner Cut
1.0mm
1.0mm

1.0mm
1.0mm

When the length of the over cut is set, cutting is performed from the position before the starting
point by the specified length and stops after crossing the end point
Setting value: 0.1mm – 1.0mm

Mimaki Europe B.V. 42

Sign Graphics Products
 A wide variety of Print&Cut functions
• Cut & Print
• Thin media such as heat transfer media is cut without drying time

P&C (Cut after printing) C&P (Cut before printing)

When the ink is not dry enough… Cut before printing allows for…
①The edge peels off ①The edge does not peel off
②The cut part sticks together again ②The cut part does not stick together
again

Drying time is No drying time is

required. required.

Mimaki Europe B.V. 43

Sign Graphics Products
 Auto pull-back printing
• When printing high density colors on silver, a brighter
metallic color is created with auto pull-back printing

Workflow with auto pull-back printing

① Print silver and color plate ③ Print colors

Result Image
for metallic color

Metallic blue

=
②
Automatically
pull-back
media to
origin

Green Silver (Spot color) Green

Blue on top

Mimaki Europe B.V. 44

Sign Graphics Products
 A wide variety of Print&Cut functions

• Automatic media clamp function

• Pinch roller pressure is automatically changed in 4 levels (High/Middle/Low/OFF)
• Feed media at the best pressure for each printing and cutting to deliver fine quality
• Full automatic function enables unattended operation without manual intervention
from the start of printing to the end of cutting

• Machine with Automatic media clamp function

Continuous operation of P&C is possible
Set media Set media
Print clamp automatically Cut clamp automatically Print

• Machine without Automatic media clamp function

• Remove pinch roller manually or Always use pinch roller

Unattended operation of P&C is not possible

Remove pinch Attach pinch
Print Cut Print
roller manually roller manually

Mimaki Europe B.V. 45

Sign Graphics Products
 Optimized work efficiency
• Highly visible design of the machine
• Color LCD control panel
• Display size of 52.56mm x 70.08mm
• Allowing easy setup and control
• Status LED
• LED status lamp indicates the status of the printer
• Easy to see from an distance

Various information is Status LED

displayed in a graphical Blinking in Blue: Normal operation
manner, such as media Blinking in Red: Needs attention
width, heater temperature
and remaining ink

Mimaki Europe B.V. 46

Sign Graphics Products
 Stable printing

• Lift up block
• Lift up blocks can be attached to the casters of the printer
• They prevent the shaking of the machine while printing
Without lift up block With lift up block

Lift up the printer and

set lift up block

Mimaki Europe B.V. 47

Sign Graphics Products
 Rip software, RasterLink6

Intuitive Operation New Advanced Functions

・Batch printing
The main information is in one screen. Print images with different profiles to select the best
The status of printer, the progress of one when printing on media which has never been
ripping, the status of job can be
used before
checked at a glance. Nesting or
composition of job are displayed
visually. ・3-layer printing
Simultaneous 3-layer printing
(Color → White → Color)
The visual icons on the right side of
the screen allows for the easy and ・Convenient functions
quick setting of the print condition. Estimated Completion Time display
Enhanced layout function
Printer Status display

Web Update function

Frequently used setting can be The web update is available as well as RasterLinkPro5
registered as “My Favorite”. which has been well received.
Up to 30 settings can be registered.
The program update and the profile download can be
done through the web easily

Mimaki Europe B.V. 48

Sign Graphics Products
 Easy creation of P&C data
• P&C data can be created easily with RasterLink Tools (Illustrator Plug-in)
• RasterLink6 recognizes spot color path as cut line
• Crop marks can be attached in RasterLink6

• P&C data creation with RasterLink Tools

①Select images ②Click “Frame Extraction” ③Extracts frames of images

and specifies them as the
spot color “Cut Contour”

Mimaki Europe B.V. 49

Sign Graphics Products
 Input profile
• Input profile “WideMimakiNaturalVivid” is available for
reproducing brilliant color for Orange and Light Black ink set.
WideMimakiCMYK WideMimakiNaturalVivid WideMImaki2013forSign

・Mimaki’s standard input profile ・Reproduces brilliant color ・High intensity input profile
and natural skin tone for specialized for JV400LX (Or,G)
(C)JV150/300 (Or,Lk)

Mimaki Europe B.V. 50

Sign Graphics Products
 Options
• MBIS3 – Mimaki bulk ink system
• OPT-J0364 for CJV300 series

• Anti-static sheet, recommended option!

• OPT-J0357 for CJV300-130
• OPT-J0355 for CJV300-160

Mimaki Europe B.V. 51

Sign Graphics Products
 Options
• Drying Fan
• Extra power supply needed. 100-220V, 1,4A
• OPT-J0352 for CJV300-130
• OPT-J0351 for CJV300-160

• Air exhaust unit

• Works only in combination with the Drying fan
• OPT-J0354 for CJV300-130
• OPT-J0353 for CJV300-160

• Eco-cartridge needed for BS3/BS4 inks

• OPT-J0361, 1 set of 4 eco-cartridges, 2 sets to be ordered

Mimaki Europe B.V. 52

Sign Graphics Products
 Packing / Installation
Packing
Model Width Depth Height Weight
CJV300-130 2,662mm 220kg
750mm 1,050mm
CJV300-160 2,912mm 235kg

Installation condition
●Remarks
1. Do not install on the weak surface floor.
2. Make sure to use in a ventilated environment.
1. Environmental temperature: 20-30°C
2. Quality assurance temperature: 20-25°C
3. Humidity: 35-65%Rh (no condensation)
4. Temperature gradient: ±10°C/h or less
5. Dust: Equivalent to office environment
3. Do not install on carpets, etc because those are easy to be
charged, and it can effect the image quality.
4. Ink odor generates. Please use the machine in a well-ventilated
environment.
5. Do not install in the place where using a photograph fixer or the
place with acid steam like acetic acid, hydrochloric acid.
*Installation space for PC is required separately

Mimaki Europe B.V. 53

Sign Graphics Products
 Specifications 1

CJV300-130 CJV300-160
Print head On-demand piezo head (staggered dual-head)
Resolution 360 dpi,540 dpi,720 dpi, 1080 dpi, 1440 dpi
Drop size Min. 4pl, Max.35pl
Head height 2.0mm/2.5mm/3.0mm *manual adjustment
(+1.0mm or +2.0mm)
Ink type Eco solvent ink: SS21/BS3/BS4/ES3 Sublimation Ink: Sb53/Sb54
Ink color SS21:10-color (CMYKLcLmLkOrWSi), BS3(CMYK), BS4(CMYK), ES3: (CMYKLcLm),
Sb53(BlMYKDKLBlLm), Sb54 (BLT,MT,YT,KT)
Ink capacity SS21: 440ml cartridge / 2L ink pack (W, Si:220ml cartridge only) Sb53: 440ml cartridge / 2L ink pack
BS3: 600ml ink pack / 2L ink pack Sb54: 2L ink pack
BS4: 600ml ink pack / 2L ink pack
ES3: 440ml cartridge 2L ink pack is used with MBIS3

Mimaki Europe B.V. 54

Sign Graphics Products
 Specifications 2

CJV300-130 CJV300-160
Max. printing width Max.1,361mm (53.5”) Max.1,610mm (63.3”)
Max. media width Max.1,371mm (53.9”) Max.1,620mm (63.7”)
Media thickness 1.0mm (0.039’”) or less
Roll weight 40kg (88lb) or less
Cutting pressure 10～450gf
Cut speed Speed: Max30cm/s Acceleration: Max 1G
Outside dimension 2,525mm(W)x700mm(D)x1,392mm(H) 2,775mm(W)x700mm(D)x1,392mm(H)
Packing size 2,662mm(W)x750mm(D)x1,050mm(H) 2,912mm(W)x750mm(D)x1,050mm(H)
Body weight 167kg 178kg
Power supply Single phase (AC100～120V/220～240V ±10％)×2 50/60Hz±1Hz
Power consumption 2x (100V) Max 1440W 2x (220V)Max 1920W
Applicable standards VCCI class A / FCC class A / UL60950-1ETL / CE Marking(EMC, Low Voltage and Machinery)
CB report / RoHS/ REACH / CCC(pending) / Energy Star / RCM

Mimaki Europe B.V. 55

Sign Graphics Products
 Certificates
• OEKO-TEX® ECO-PASSPORT Certification for textile inks
• Mimaki ink Sb53 and Sb54 are OEKO-TEX® certified
• ECO PASSPORT by OEKO-TEX® is a mechanism by which
textile chemical suppliers demonstrate that their products
are suitable to print skin-friendly clothing and other textiles
for end users
• This certificate therefore constitutes an important decision-
making element when purchasing inks for textile production

• GREENGUARD Gold Certification for SS21 and BS4 inks

• Mimaki mild-solvent inks SS21 and BS4 are GREENGUARD
GOLD certified.
• Products that are GREENGUARD GOLD certified meets the
rigorous standards for low emission of volatile organic
compounds (VOCs) and ensures that a product is acceptable
for use in environments such as schools and healthcare
facilities.

Mimaki Europe B.V. 56

Sign Graphics Products
 FAQ 1
# Questions Answers
1 What is the outdoor durability of SS21 silver and ES3 silver SS21:1 year ES3:Six months with laminate
However, if the outdoor durability of the lamination is poor, the
outdoor durability of SS21/ES3 becomes poor accordingly.
2 How is the media compatibility of SS21 silver? Polymeric-calendered PVC is recommended. SS21 silver has poor
media compatibility on monomeric-calendered PVC. Monomeric
plasticizer has a relatively low tolerance for solvent and heat,
which leads to the fast absorption of ink. Since SS21's silver
requires time for its color material to align flat, the media
compatibility with fast ink absorbing monomeric-calendered PVC
is poor.
3 Can SS21 silver be used for heat transfer media? It is not recommended as scratch resistance is weaker.
4 What is the shelf life of SS21 silver? 1 year from its production.
5 Can a roll of media with more than 250mm outer diameter No, it cannot, because the media interferes with the bar under
be used if its weight is less than 40kg? the media.
6 Can the width of transparent media be detected Yes, it can.
automatically? However, when using black media, there may be occasions that
media width cannot be detected automatically because the color
of heater is also black.
7 When is the ink circulation of SS21 silver performed? Once every 4 hours, for 2 minutes.
8 Is crop mark used for pull-back printing? No. After printing silver layer, the media is automatically pulled
back to the origin, then it prints color layer.
9 Are the cutting accuracy and the throughput of CJV150 and Yes, they are.
CJV300 equivalent?

Mimaki Europe B.V. 57

Sign Graphics Products
 FAQ 2
# Questions Answers
10 Are the cutting accuracy and the throughput of CJV150/300 CJV150/300 cutting accuracy is equivalent or better.
and CJV30 equivalent? Throughput depends on cutting data

11 How can I print Mimaki Metallic Color Collection? The Metallic Color Collections are stored in a folder of RL6.
Please open the file from the folder and print.

12 When printing metallic color, different media profiles can be Yes, it is. When composing color plate and white plate, different
used for silver plate and color plate, if the resolution and media profiles can be selected for each. But please select the same
pass count are the same. (This was not possible before.) profile for both color plate and white plate for better print quality.
Is this also the same when using white ink?

13 From CJV150/300, media width is detected not by the Yes, it is possible.

position of the pinch rollers, but by the actual media width.
Is it then possible to cut media outside of the pinch rollers
at both sides?

14 The adjustment of CJV30's P&C positioning accuracy is Please print a special pattern from RL6 to adjust print & cut position.
difficult, while Roland has the simple adjustment method.
How is the CJV150 and CJV300?
15 Can the setting of P&C positioning accuracy be registered as No, it cannot.
"Favourite"?
16 Can the pinch roller which is positioned out of media be Yes, it can.
turned off automatically?
17 Should the Pen-line sponge be used when performing Dotted-line cut can be performed by using Pen-line rubber. However,
dotted-line cut? to prevent the blade from abrasion, it is recommended to use the
optional Pen-line sponge

Mimaki Europe B.V. 58

Sign Graphics Products
 FAQ 3
# Questions Answers
18 Can ES3 CMYK and SS21 silver be used at the same time? No, they cannot.
19 When one of the print heads is broken, can you still print Yes, it can. It is possible after F/W Ver.1.4.
only with the other head?
20 What is the color difference between SS21 silver and ES3 The color is different.
silver inks? SS21 silver ink shows more shiny effect and has a little bit more
darker tone compared to ES3 silver ink.

Mimaki Europe B.V. 59

Sign Graphics Products
 Thank You!
MIMAKI EUROPE

Mimaki Europe B.V. 60

Sign Graphics Products