MILLENNIUM
FORMS, LLC
TEST REPORT
SCOPE OF WORK
ASTM E283, ASTM E331, AND ASTM E330/E330M TESTING ON
304 STAINLESS STEEL CUPPED, WALL TILES
REPORT NUMBER
L5734.02-109-44
TEST DATE(S)
12/01/20 - 12/03/20
ISSUE DATE
01/25/21
RECORD RETENTION END DATE
12/03/24
PAGES
15
DOCUMENT CONTROL NUMBER
ATI 00479 (07/24/17)
RT-R-AMER-Test-2805
© 2017 INTERTEK
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
REPORT ISSUED TO
MILLENNIUM FORMS, LLC
550 East Centralia Street
Elkhorn, Wisconsin 53121
SECTION 1
SCOPE
Intertek Building & Construction (B&C) was contracted by Millennium Forms, LLC to perform
testing in accordance with ASTM E283, ASTM E331, and ASTM E330/E330M on their 304 Stainless
Steel Cupped, wall tiles. Results obtained are tested values and were secured by using the
designated test method(s). Testing was conducted at Intertek B&C test facility in York,
Pennsylvania.
This report does not constitute certification of this product nor an opinion or endorsement by this
laboratory.
For INTERTEK B&C:
COMPLETED BY: Andrew P. Mehalick REVIEWED BY: Timothy J. McGill
Technician –
TITLE: Product Testing TITLE: Manager – Product Testing
SIGNATURE: SIGNATURE:
DATE: 01/25/21 DATE: 01/25/21
APM:nls
This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client.
Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any
party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report.
Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name
or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek.
The observations and test results in this report are relevant only to the sample(s) tested. This report by itself does not imply that the
material, product, or service is or has ever been under an Intertek certification program.
Version: 07/24/17 Page 2 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 2
TEST METHOD(S)
The specimens were evaluated in accordance with the following:
ASTM E283-04(2012), Standard Test Method for Determining Rate of Air Leakage Through
Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the
Specimen
ASTM E330/E330M-14, Standard Test Method for Structural Performance of Exterior
Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
ASTM E331-00(2016), Standard Test Method for Water Penetration of Exterior Windows,
Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
SECTION 3
MATERIAL SOURCE/INSTALLATION
Test specimen were provided by the client. Representative samples of the test specimen(s) will
be retained by Intertek B&C for a minimum of four years from the test completion date.
SECTION 4
EQUIPMENT
Tape Measure Verification: 63788
Control Panel: 005406
Water Spray Rack: 003956-D
Weather Station: INT00549
Linear Transducers: 64306, 64278, 64460
SECTION 5
LIST OF OFFICIAL OBSERVERS
NAME COMPANY
Timothy J. McGill Intertek B&C
Andrew P. Mehalick Intertek B&C
Version: 07/24/17 Page 3 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 6
TEST SPECIMEN DESCRIPTION
Product Type: Wall Tiles
Series/Model: 304 Stainless Steel Cupped
Product Size(s):
OVERALL AREA: WIDTH HEIGHT
3.0 m² (32.0 ft2) millimeters inches millimeters inches
Overall size 1219 48 2438 96
Largest tile size 375 14-3/4 248 9-3/4
Large intermediate
292 11-1/2 248 9-3/4
tile size
Small intermediate
184 7-1/4 248 9-3/4
tile size
Smallest tile size 76 3 248 9-3/4
Test Wall Construction: The wood test wall was 48" wide by 96" high and constructed with 2x8
Spruce-Pine-Fir construction lumber at the perimeter with studs located 16" on center. The test
wall was sheathed with 5/8" thick five-ply plywood secured to the test wall with #8 x 1-5/8" screws
located 2" from each end and on 8" center. Two stainless steel J-channels were attached to the
sides of the test wall with #10 x 1" pan head screws spaced 1" from each end and 16" on center.
A stainless steel starter strip was attached to the bottom of the test wall with #10 x 1" pan head
screws. The screws were spaced 1" from each end and 8" on center.
Wall Tile Construction: The tiles were constructed from formed 0.015" thick 304 stainless steel.
A male interlock was utilized on the bottom and right side of the tile and a female interlock on
the top and left side of the tile. The tiles were secured with #10 x 1" pan head screws located
3/4" from the ends at the top of each tile.
Version: 07/24/17 Page 4 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 7
TEST RESULTS
The temperature range during testing was 16°C - 20°C (60°F - 68°F). The results are tabulated as
follows:
TITLE OF TEST RESULTS ALLOWED NOTE
Air Leakage,
Infiltration per ASTM E283 <0.1 L/s/m2
at 75 Pa (1.57 psf) (<0.01 cfm/ft2) Report only 1
Air Leakage,
Infiltration per ASTM E283 <0.1 L/s/m2
at 300 Pa (6.27 psf) (<0.01 cfm/ft2) Report only 1
Air Leakage,
Exfiltration per ASTM E283 <0.1 L/s/m2
at 75 Pa (1.57 psf) (<0.01 cfm/ft2) Report only 1
Air Leakage,
Exfiltration per ASTM E283 <0.1 L/s/m2
at 300 Pa (6.27 psf) (<0.01 cfm/ft2) Report only 1
Water Penetration,
per ASTM ASTM E331
at 300 Pa (6.27 psf) Pass No leakage
Uniform Load Deflection,
per ASTM E330
Deflections taken at the center of
a tile
+5554 Pa (+116.0 psf) 1.0 mm (0.04")
-5554 Pa (-116.0 psf) 5.6 mm (0.22") Report only 2, 3
Uniform Load Structural,
per ASTM E330
Permanent set taken at the
center of a tile
+8259 Pa (+172.5 psf) <0.3 mm (<0.01")
-8259 Pa (-172.5 psf) 1.5 mm (0.06") Report only 2, 3
Version: 07/24/17 Page 5 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
General Note: All testing was performed in accordance with the referenced standard(s).
Note 1: Test Date 12/01/20 / Time: 11:35 AM
Note 2: Loads were held for 30 seconds.
Note 3: Tape and film were used to seal against air leakage during structural testing. In our
opinion, the tape and film did not influence the results of the test.
Version: 07/24/17 Page 6 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 8
LOCATION OF AIR SEAL
The air seal between the test specimen and the test wall is detailed below. The seal is made of
foam weatherstripping and is attached to the edge of the test specimen buck. The test
specimen buck is placed against the test wall and clamped in place, compressing the
weatherstripping and creating a seal.
Air seal between test buck and test
wall (typically foam weatherstripping)
Test Specimen Buck
Test Wall
Air seal between test specimen
and test buck (typically silicone)
Test Specimen
Version: 07/24/17 Page 7 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 9
PHOTOGRAPH
Photo No. 1
Test Specimen Prior to Testing
Version: 07/24/17 Page 8 of 15 RT-R-AMER-Test-2805
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 10
DRAWINGS
The test specimen drawings have been reviewed by Intertek B&C and are representative of the
test specimen(s) reported herein. Test specimen construction was verified by Intertek B&C per
the drawings included in this report. Any deviations are documented herein or on the drawings.
Version: 07/24/17 Page 9 of 15 RT-R-AMER-Test-2805
Left End
CONCEALED "S" LOCK NAIL FLANGE
3/8" PROFILE WEATHER EDGE
Right End
ANTI-CAPILLARY RIDGE
Report #: L5734
Date: 12/14/2020
Verified by:
Large Cup Tile
PRE-PUNCHED FASTENER HOLES
SELF-ALIGNMENT TAB
CONCEALED "S" LOCK NAIL FLANGE
Installed-
EXPOSED PANEL FACE W/
SHADOW CUP DEPRESSION Exposed
Dimension:
FEMALE TAPERED INTERLOCK CHANNEL 8 -1/4" +/- 1/16"
Nominal
8-3/8" +/-1/16
MALE TAPERED INTERLOCK CHANNEL
3/8" PROFILE
WEATHER EDGE
ANTI-CAPILLARY RIDGE
Installed- Exposed Dimension: 14 5/8" +/- 1/16"
Nominal 14-1/2" +/-1/16"
Profile Details 1
Material Sizes Finish Colors
8 3/8" x 14 1/2"
Stainless Steel Bright (BA) See color selection chart
0.018" +/- .002
Mill (2B)
8 3/8" x 14 1/2" Natural
Zalmag Natural II
Pre-patina See color selection chart
0.018" +/- .002 Black II
Pre-Patina Revised 12/10/20
Revised 1/10/2018
Millennium Forms™ LLC \ 550 East Centralia Street \ Elkhorn, WI 53121 U.S.A. \ p. 262.723.7778 \ f. 262.922.4275 \ info@millenniumforms.com
SELF
ALIGNMENT
TAB
CONCEALED "S"
Large Cup Tile
LOCK NAIL FLANGE
EXPOSED PANEL FACE W/
SHADOW CUP DEPRESSION
Report #: L5734
Date: 12/14/2020
Verified by:
MALE TAPERED INTERLOCK CHANNEL
FEMALE TAPERED INTERLOCK CHANNEL
ANTI-CAPILLARY RIDGE
Vertical Joint Detail 2
Material Sizes Finish Colors
8 3/8" x 14 1/2"
Stainless Steel Bright (BA) See color selection chart
0.018" +/- .002
Mill (2B)
8 3/8" x 14 1/2" Natural
Zalmag Natural II
Pre-patina See color selection chart
0.018" +/- .002 Pre-Patina
Black II Revised 12/10/20
Revised 1/10/2018
Millennium Forms™ LLC \ 550 East Centralia Street \ Elkhorn, WI 53121 U.S.A. \ p. 262.723.7778 \ f. 262.922.4275 \ info@millenniumforms.com
Tile
Flat Tile
Large Cup
LARGE TILE
WEATHERPROOFING
DONE BY OTHERS
FALSE STARTER
Report #: L5734
Date: 12/14/2020
Verified by:
Starter/False Starter 4
Material Sizes Finish Colors
8 3/8" x 14 1/2"
Stainless Steel Bright (BA) See color selection chart
0.018" +/- .002
Mill (2B)
8 3/8" x 14 1/2" Natural
Zalmag Natural II
Pre-patina See color selection chart
0.018" +/- .002 Pre-Patina
Black II Revised 12/10/20
Revised 1/10/2018
Millennium Forms™ LLC \ 550 East Centralia Street \ Elkhorn, WI 53121 U.S.A. \ p. 262.723.7778 \ f. 262.922.4275 \ info@millenniumforms.com
Report #: L5734
Date: 12/14/2020
Verified by:
Large Cup Tile
J-CHANNEL
WEATHERPROOFING
DONE BY OTHERS
LARGE TILE
CAULKING JOINT
WINDOW GLAZING
Window Jam 7
Material Sizes Finish Colors
8 3/8" x 14 1/2"
Stainless Steel Bright (BA) See color selection chart
0.018" +/- .002
Mill (2B)
8 3/8" x 14 1/2" Natural
Zalmag Natural II
Pre-patina See color selection chart
0.018" +/- .002 Pre-Patina
Black II Revised 12/10/20
Revised 1/10/2018
Millennium Forms™ LLC \ 550 East Centralia Street \ Elkhorn, WI 53121 U.S.A. \ p. 262.723.7778 \ f. 262.922.4275 \ info@millenniumforms.com
J-Channel Sill
Report #: L5734
Date: 12/14/2020
Verified by:
2.0
3.5
0.5
0.3
1.5
1.0
Exposed Area
Exposed Area
Initials:________
Standard Wall Flashing
Initials:________
Linear 10-ft Quantity:________ Linear 10-ft Quantity:________
False Starter Window Head
Exposed Area
1.2
1.75
0.55
1.00
0.25
50
1.27
0.
Exposed Area
Initials:________ Initials:________
Linear 10-ft Quantity:________ Linear 10-ft Quantity:________
See pages 2 and 3 for inside and outside See page 5 to sketch custom flashing details
corner options and details
Millennium Forms Standards 1
Material Sizes Finish Colors
Stainless Steel Sold in 10-ft Bright (BA), See color selection chart
Revised 7/9/2018
Revised 11/2/2020
24 ga. sections Mill (2B) online
Zalmag Sold in 10-ft Natural,
24 ga. sections Pre-Patina II, N/A
Black
Millennium Forms™ LLC \ 550 East Centralia Street \ Elkhorn, WI 53121 U.S.A. \ p. 262.723.7778 \ www.millenniumforms.com\ info@millenniumforms.com
130 Derry Court
York, Pennsylvania 17406
Telephone: 717-764-7700
Facsimile: 717-764-4129
www.intertek.com/building
TEST REPORT FOR MILLENNIUM FORMS, LLC
Report No.: L5734.02-109-44
Date: 01/25/21
SECTION 11
REVISION LOG
REVISION # DATE PAGES REVISION
0 01/25/21 N/A Original Report Issue
Version: 07/24/17 Page 15 of 15 RT-R-AMER-Test-2805
