2.
DENSITY - PERMEABILITY
T 615/E
APPARATUS FOR IN-SITU DENSITY (SAND METHOD)
ASTM D 1556 AASHTO T 191 CNR 22 1972
Cone 165 mm diameter made of chromium-plated, accurately machined, steel and with a calibrated valve (12.70 mm dia. hole). Aluminium casting base and 5 litre plastic container provided. Dimensions: 460 x 470 x 610 (h) mm. Weight: 4 kg
Accessories and spare parts:
T 615/CE T 615/S T 615/B T 615/1 Calibration cylinder Steel made. Inner diameter 165 mm and 187 mm high. Weight 5 kg Calibrated density sand (50 kg) 5 litre plastic container Base plate, aluminium casting
IN-SITU DENSITY SAND REPLACEMENT METHOD
BS 1377 BS 1924
T 612/1 T 612/2 T 612/3 T 613/1 T 613/2 T 613/3 T 614/1 T 614/2 T 614/3
(100 mm DIA.) SAND POURING CYLINDER CALIBRATION CONTAINER 100 x 150 (H) mm METAL BASE TRAY, 100 mm HOLE 300 mm SQUARE (150 mm ) SAND POURING CYLINDER CALIBRATION CONTAINER 150 x 200 (H) mm METAL BASE TRAY, 150 mm HOLE 300 mm SQUARE (200 mm ) SAND POURING CYLINDER CALIBRATION CONTAINER 200 x 250 (H) mm METAL BASE TRAY, 200 mm HOLE 500 mm SQUARE T 615/E T 615/S T 615/CE
T 612/1 T 612/2 T 612/3
T 614/1 T 614/2 T 614/3
28
DENSITY - PERMEABILITY
2.3
T 615/G
APPARATUS FOR IN-SITU DENSITY 305 mm dia. (SAND METHOD)
This model is used only for soils containing gravel. The cone (steel made) is 305 mm in diameter while the pouring hole has a diameter of 25 mm. Capacity of the plexiglass jug is 15 litres. Round base made of steel sheet. Dimensions: 900 x 900 x 1100 (h) mm. Weight: 28 kg.
APPARATUS FOR IN-SITU DENSITY (CALIBRATED MOULD METHOD)
Surface soil samplers
A core cutter sampling tube is driven into the soil, using specic accessories, to take a standard volume sample. The equipment is made of galvanized steel.
ASTM D 2937 CNR 22
T 615/G
SAMPLING TUBE: DIAMETER 73 x 66 mm T 631/PB T 631/PM DRIVING DOLLY COMPLETE WITH HEAD AND SLIDING HAMMER, 5 kg
BS 1377:9
T 631/F T 631/G T 631/L T 634/F T 634/G T 634/L
SAMPLING TUBE: DIAMETER 100 X 130 MM (kg 1) DRIVING DOLLY (kg 1) DRIVING HAMMER (kg 13,5) SAMPLING TUBE: DIAMETER 150 x 180 mm (kg 5) DRIVING DOLLY (kg 4) DRIVING HAMMER (kg 16)
T 631/F T 631/G T 631/L T 634/L
T 634/F
T 631/PB T 631/PM
T 634/G
29
2.3
DENSITY - PERMEABILITY
T 616
BALLOON DENSITY APPARATUS 1596 ml (WATER METHOD)
ASTM D 2167 AASHTO T 205 CNR 22
Aluminium casting, with valves made of stainless steel; thick-glass graduated cylinder. Guard base with ttings, valves and built-in membrane. Actuating bulb of the double-acting type (suction - pressing) with quick coupling. Base plate, made of cast aluminium, with central hole. The apparatus is supplied with 12 balloons. Dimensions: 250 x 240 x 680 (h) mm Weight: 6.5 kg
Accessories and spare parts:
T 616/0 T 616/1 T 616/2 T 616/H T 616/V Carrying case Pump with coupling, ttings and valve Base plate: 9" x 9" (228 x 228 mm) Pack of 12 rubber balloons Glass cylinder (10 cc divisions)
T 616/G
BALLOON DENSITY APPARATUS 3000 ml (WATER METHOD) - LCPC T 616
In this model the water pressure is controlled by a handoperated piston which slides inside the metal cylinder. The pressure is measured by a manometer while the volume of the balloon appears on the graduated stem of the piston. The apparatus is supplied with 4 reinforced balloons, plate and clamps. Dimensions: 360 x 340 x 700 (h) mm Weight: 10 kg
Accessories and spare parts:
T 616/R DV 677/2 DV 672 DV 904/M DV 677/1 DV 904 DV 904/P DV 671 DV 674 Pack of 6 reinforced balloons Scraper Density hand pick Club hammer Metal dibber tool Rubber headed mallett Steel pointed rod Density spoon, 36 cm long Density chisel
T 616/G
30
