Catalog

Power-over-Ethernet
Combined Power and Data Technology for Network
Flexibility

www.transition.com Transition Networks • Power-over-Ethernet Catalog

Connect and Power Network Devices Without the Need for
Expensive Power Runs and Additional Cabling
Networks today evolve quickly and must be both flexible and scalable. Getting power where it is needed within those
networks – such as to security cameras, wireless access points, or IP phones – is yet another challenge. Power is often
not available precisely where it is needed and adding conventional power wiring can be inconvenient and costly.
Combining power and data on one cable with Transition Networks’ full line of feature rich Power-over-Ethernet (PoE)
products eliminates the need for conventional power wiring, eases your installation and power location concerns, and
provides your network with the flexibility and scalability necessary to expand and grow.

Entrust Your PoE Needs to a Network Evolution Expert for Maximum Benefits
Transition Networks has long been a leader in providing solutions to ensure your network is equipped to meet the
demands of today and tomorrow. By providing PoE and PoE+, our solutions make it simple to install, deploy, and manage
power within your network. Transition Networks’ power injectors, media converters and Ethernet switches that operate
in extended temperature ranges with industry-required certifications and remote management, create PoE solutions that
result in lower cost, less downtime, easier maintenance and greater installation flexibility.

Transition Networks has a complete offering to service edge networks

• Transparent device switching
• Economical media conversion
• Solutions combining power and data for fewer and more efficient cable runs
• Hardened and commercial product offering

Innovative features allow simple installation and maintenance

• Auto Power Reset (APR) monitors and automatically restarts edge devices
• DHCP on each switch port reduces the need for manual configuration when devices are replaced

Experienced industry leader for design, consultation, and implementation

• Solutions that comply with industry specifications
• Products that meet or exceed quality standards
• Exceptional customer service

www.transition.com Transition Networks • Power-over-Ethernet Catalog

PoE Hardened & Commercial Products
PoE & PoE+ Switches
PoE switches are useful for integrating campus security into corporate networks in both enterprise and industrial
environments. By deploying a PoE switch, power can be provided to both an IP camera monitoring the entrance to a
floor as well as to the access control system.

UTP w/ PoE
Wireless
UTP w/ PoE Access Point

UTP w/ PoE
Network Camera
VoIP
Phone
UTP w/ PoE

UTP w/ PoE
Network Camera
VoIP
Phone

Managed PoE Switch

PoE Mid-Span Injectors

Transition Networks’ PoE mid-span injectors are ideal for adding PoE to an existing network. PoE mid-span injectors are
deployed between a regular Ethernet switch and a powered device, injecting power without affecting the data. Mid-span
injectors can also be used in IP video security systems. By deploying the PoE injectors between the IP network cameras
and the network switch, the IP cameras are powered over the same cable transmitting the data feed, eliminating the
need for a separate external power supply. Transition Networks’ hardened PoE mid-span injectors can be used for the
same purposes in an outdoor non-temperature controlled cabinet, eliminating the need to fit an external power supply
within the cabinet.

PoE Injector
Wireless
Access Point

Non-PoE Switch

PoE Injector
Network Camera

Up to 100 M

www.transition.com Transition Networks • Power-over-Ethernet Catalog

PoE Hardened & Commercial Products Continued
PoE Media Converters
PoE media converters offer the benefits of PoE while also capitalizing on the benefits of fiber optic cabling to the network
edge. PoE media converters are useful in the deployment of fiber-to-the-desk applications for secure connections to VoIP
phones. The PoE media converter interfaces between the fiber infrastructure and copper ports on VoIP phones and also
provides power to the IP phone. This enables users to experience the benefits of VoIP while maintaining the high level of
data security fiber networks provide. As an end-span device, a PoE media converter fully generates the Ethernet signal
and can support transmission distances of up to 100M on copper cable.

Up to 100 M

PoE Media
Up to 2 KM Multimode Fiber Converter Wireless
or 120 KM Single Mode Fiber Access Point

10/100Base-TX
Switch

PoE Media
Converter VoIP Phone

PoE Ethernet Extenders

PoE Ethernet Extenders offer the benefits of PoE over alternate types of existing cabling (such as coax) to upgrade
networks without having to replace the cable infrastructure and to provide power to devices at the network edge. PoE
Ethernet Extenders are useful in the deployment of new IP network devices, such as upgrading older analog surveillance
cameras to modern PoE-powered cameras or wireless access points, and are ideal for use in locations where power
cabling is not readily available, not cost-effective to add or not easily accessed. The distance that can be achieved with
PoE Ethernet Extenders varies depending on type of cable, operating environment and power requirements for the end
device.

www.transition.com Transition Networks • Power-over-Ethernet Catalog

PoE Hardened & Commercial Products Continued
PoE NIC*
PoE Network Interface Cards (NICs) provide connectivity to a secure fiber network while also delivering power to a
PoE powered device (PD), such as a VoIP phone. Developed to support fiber-to-the-desk applications, where fiber is
the preferred cabling infrastructure due to its ability to provide secure network connections, PoE NICs can replace two
copper-to-fiber media converters at the desktop.

UTP (PoE)
Power & Data
12V Power
input for PoE
PCIe VoIP Phone

Access to
Fiber Network

Fiber Switch

Electrical Outlet *Not available as hardened product

www.transition.com Transition Networks • Power-over-Ethernet Catalog

PoE Product Matrix

Commercial

Auto Power
Port Count

PoE Power
PoE Mode
Hardened
DHCP Per
Managed

Budget
Reset
PoE+
Port
PoE Injectors Description
MIL-L100i 10/100Base-T 1-Port PoE Mid-Span Injector 1 X B 15W
L1000i-at (1) 10/100/1000Base-T port PoE+ Injector 1 X X A 30W
SI-IES-1200-LRT (1) 10/100/1000Base-T Port + (1) 10/100/1000Base-T PoE+ Port 2 X X A 30W
SI-IES-111D-LRT (1) 100/1000Base-X SFP Port + (1) 10/100/1000Base-T PoE+ Port 2 X X A 30W
SI-IES-121D-LRT (1) 100/1000Base-X SFP Port + (2) 10/100/1000Base-T PoE+ Ports 3 X X A 60W
PoE Media Converters
SPOEB10xx-105 10/100Base-TX PoE PSE to 100Base-FX 2 X A/B1 X 15W
SGPOE10xx-1x0 10/100/1000Base-T PoE PSE to 1000Base-X 2 X A X 15W
M/GE-ISW-SFP- 10/100/1000Base-T (RJ-45) to 100/1000Base-X Open SFP Slot 2 X A/B 3
NA
01-PD PoE Powered Device
PoE Ethernet Extenders
EO2PSE4052-111 & (1) 10/100/1000Base RJ-45/SFP Combo Port + (1) 1000Base-T 2 X X X A/B3 X 30W
EO2PD4052-111 RJ-45 Port or 2-Wire Terminal Block
EOCPSE4020-110 & (1) 100/1000Base RJ-45/SFP Port + (1) 1000Base Coax BNC Port 2 X X X A/B3 X 30W
EOCPD4020-110
PoE Switches
S8TXATA (8) 10/100Base-TX PoE+ Ports 8 X X2 A 120W
SM8TAF2DPA (8) 10/100/1000Base-T PoE Ports and (2) 100/1000Base-X SFP 10 X X A 75W
Ports
SM8TAT2DPA (8) 10/100/1000Base-T PoE+ Ports and (2) 100/1000Base-X SFP/ 10 X X X2 A X 130W
RJ-45 Ports
SM8TAT2DPB (8) 10/100/1000Base-T PoE+ Ports and (2) 100/1000Base-X SFP/ 10 X X X X2 A X 130W
RJ-45 Ports
SM16TAT2DPA (16) 10/100/1000Base-T PoE+ Ports and (2) 100/1000Base-X SFP/ 18 X X X X2 A X 370W
RJ-45 Ports
SM24TAT2DPA (24) 10/100/1000Base-T PoE+ ports and (2) 100/1000Base-X SFP/ 26 X X X X2 A X 370W
RJ-45 ports
SM8TAT2SA (8) 10/100/1000Base-T PoE+ ports and (2) 100/1000Base-X SFP 10 X X X2 A X 130W
slots
SM16TAT2SA (16) 10/100/1000Base-T PoE+ ports and (2) 100/1000Base-X SFP 18 X X X2 A X 250W
slots
SM24TAT2SA (24) 10/100/1000Base-T PoE+ ports and (2) 100/1000Base-X SFP 26 X X X2 A X 370W
slots
SM24TAT4XA (24) 10/100/1000Base-T PoE+ Ports and (4) 1G/10G SFP Slots 28 X X X2 B X 370W
SISTP101x-141-LRT (4) 10/100Base-TX PoE Ports and (1) 100Base-FX Port 5 X A 60W
SISTP1040-242-LRT (4) 10/100/1000Base-T PoE+ Ports and (2) 1000Base-X SFP Ports 6 X X A 120W
SISPM1040-382- (8) 10/100Base-TX PoE+ Ports and (2) 10/100/1000Base-T or 10 X X X A X 240W
LRT 100/10100Base-X SFP Combo Ports
SISPM1040-384- (8) 10/100/1000Base-TX PoE+ Ports and (4) 1000Base-X SFP Ports 12 X X X A X 240W
LRT-B
SISPM1040-384- (8) 10/100/1000Base-T PoE+ ports and (4) 100/1000Base-X SFP 12 X X X X A X 240W
LRT-C slots
SISPM1040-362- (4) 10/100/1000Base-T PoE+ ports + (2) 10/100/1000Base-T RJ- 8 X X X X A X 120W
LRT 45 and (2) 100/1000Base-X SFP slots
PoE NICs
N-GXE-POE-xx-01 1000Base-X and 10/100/1000Base-T PoE+ 2 X X A 30W
1
User selectable
2
PoE+ not available on all ports simultaneously
www.transition.com 3
PoE Mode determined by power sourcing equipment Transition Networks • Power-over-Ethernet Catalog
Table of Contents
1  MIL-L100i
2  L1000i-at
3  SI-IES-1200-LRT
4  SI-IES-111D-LRT
5  SI-IES-121D-LRT
6  SPOEB10xx-105
7  SGPOE10xx-1x0
8  M/GE-ISW-SFP-01-PD
9  EO2PSE4052-111 & EO2PD4052-111
10  EOCPSE4020-110 & EOCPD4020-110
11  S8TXATA
12  SM8TAF2DPA
13  SM8TAT2SA
14  SM16TAT2SA
15  SM24TAT2SA
16  SM8TAT2DPA
17  SM8TAT2DPB
18  SM16TAT2DPA
19  SM24TAT2DPA
20  SM24TAT4XA
21  SISTP101x-141-LRT
22  SISTP1040-242-LRT
23  SISPM1040-382-LRT
24  SISPM1040-384-LRT-B
25  SISPM1040-384-LRT-C
26  SISPM1040-362-LRT
27  N-GXE-POE-xx-01

www.transition.com Transition Networks • Power-over-Ethernet Catalog

MIL-L100i
(1) Port PoE Mid-Span Injector
Transition Networks’ Power-over-Ethernet solutions deliver unified supply of
data, voice, and video as well as electrical power through a single source by Ordering Information
sending power over standard CAT5 and above twisted pair cables. Power- MIL-L100i
over-Ethernet simplifies installation and eliminates the need to run separate 10/100Base-T 1-Port PoE Mid-Span Injector
power cords and LAN cables to each Access Point or port locations.
Our PoE products provide organizations with affordable, easy-to-use solutions
that enable them to migrate their network infrastructure to support a growing
Power Supply Included
number of advanced cost-saving, performance enhancing applications,
such as streamlining wireless, VoIP, Network IP camera deployments, and To order the corresponding country
specific power supply, add the
centralized power backup solutions. Whether on a factory floor or in an extension from the list below to the end
enterprise facility, running power to hard to reach locations with Transition of the SKU
Networks’ Power-over-Ethernet solutions significantly reduces cabling and Ex: MIL-L100i-NA
outlet requirements while providing the lowest total cost of ownership. -NA = Country Code
-NA = North America
-LA = Latin America
-EU = Europe
-UK = United Kingdom
-SA = South Africa
Features Specifications -JP = Japan
-OZ = Australia
Standards IEEE 802.3af -BR = Brazil
• Ensures uninterrupted network operation by IEEE 802.3
providing a “power safe” path to the user IEEE 802.3u

• Intelligent detection process to detect Ports (1) DATA IN RJ-45 Ethernet Port
(1) DATA OUT PoE Injector RJ-45
Power-over-Ethernet enabled terminals and Ethernet Port
protect legacy endpoints
Status LEDs Power: PoE power is being injected
• Furnishes easy and cost-effective installation into the Data Out port
with fewer cables and electrical outlets Cable Requirements 10Base-T: 2-pair UTP/STP Cat.3,4,
5 cable EIA/TIA-568100-
• Provides one central secure location for ohm(100 m)
power 100Base-TX: 2-pair UTP/STP Cat.5 cable
EIA/TIA-568 100-ohm(100 m)
• IEEE 802.3af compliant
Dimensions Width: 4.6” [117 mm]
• Ensures safe delivery of power to existing Depth: 2.3” [60 mm]
Height: 1.3” [35 mm]
legacy devices as well as power-enabled
terminals Power Output -48 VDC, 300 mA
Power Input AC 100~240V, 50~60 Hz, 0.3A
• Avoids altering existing wiring and does not
Environment Operating: 0°C to 40°C
damage cabling infrastructure already in
Storage: 0°C to 70°C
place Humidity: 5% to 95% (non-condensing)
• Power delivery over Ethernet cables does Weight 0.44 lbs. [0.2 kg]
not cause data degradation or loss of data Compliance Safety: UL, cUL, CE/EN60950
integrity Emissions: FCC Class B, CE Mark
Warranty Lifetime
• Easiest way to add support of PoE to an
existing network without replacing existing
equipment

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 1

L1000i-at
(1) Port PoE+ Mid-Span Injector

Transition Networks’ L1000i-at is a 1-port 10/100/1000Base-T PoE+

midspan injector which provides a simple, cost-effective, fully IEEE Ordering Information
802.3at compliant solution to upgrade existing infrastructure with PoE+. L1000i-at
Powering high-powered PoE+ enabled network devices, such as PTZ (1) 10/100/1000Base-T port PoE+ Injector
dome network cameras, can be done without the need to install power
outlets and electrical cabling.
PoE technology allows IP phones, wireless access points, and security Power Supply Included
network cameras to receive power, along with data, over standard
To order the corresponding country
Ethernet cables, leaving the network infrastructure completely unaltered. specific power supply, add the
PoE technology also allows for easier installation in areas where power extension from the list below to the end
cabling and outlets are unavailable, thereby reducing installation costs. of the SKU
Ex: L1000i-at-NA
Midspan injectors offer users the ability to take advantage of PoE -NA = Country Code
technology while protecting investments they’ve made in purchasing, -NA = North America
-LA = Latin America
configuring, and deploying non-PoE supported devices such as standard -EU = Europe
Ethernet switches. -UK = United Kingdom
-SA = South Africa
-JP = Japan
-OZ = Australia
-BR = Brazil

Features Specifications
• Power-over-Ethernet Injector for Standards IEEE 802.3
10/100/1000Base-T IEEE 802.3U
IEEE 802.3ab
• Remote Power Feeding IEEE 802.3af
IEEE 802.3at
• Overload and short circuit protection Ports (1) DATA IN RJ-45 Ethernet Port
(1) DATA OUT PoE Injector RJ-45
• Mixes Ethernet and power on the RJ-45 port Ethernet Port
• Delivers power up to 100 meters Status LEDs AC Power
Feeding Power
• Light weight and compact size Cable Requirements 10Base-T:
2-pair UTP/STP Cat.3,4,5 cable
EIA/TIA-568 100-ohm(100 m)
• Plug-and-play 100Base-TX: 2-pair UTP/STP Cat.5 cable
(Cat. 5e recommended); EIA/
• IEEE 802.3at and IEEE 802.3af compliant TIA-568 100-ohm(100 m)
1000Base-T: 4-pair UTP/STP Cat.5e or
above cable; EIA/TIA-568
100-ohm, 100m
Dimensions Width: 2.65” [65 mm]
Depth: 5.51” [140 mm]
Height: 1.42” [36 mm]
Power Input AC input voltage range: 100 – 240 VAC;
50 – 60Hz 0.72A
Power Output 55V @ 0.6A
Environment Operating: 0°C to 40°C
Storage: -40°C to 70°C
Weight 1 lb. [0.45 kg]
Compliance Safety: UL, cUL, CE/EN60950-1
Emissions: FCC Class B, CE Mark
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 2

SI-IES-1200-LRT
Unmanaged Hardened PoE+ Injector
(1) 10/100/1000Base-T Port + (1) 10/100/1000Base-T PoE+ Port

The t-1200-LRT is an unmanaged hardened PoE+ injector that

Ordering Information
adds up to 30 Watts of power on a network segment. Injectors SI-IES-1200-LRT
(1) 10/100/1000Base-T Port
are commonly used to power PoE devices in locations where + (1) 10/100/1000Base-T PoE+ Port
a power source does not exist. The injector has redundant
Optional Accessories (sold separately)
input power connections, and a fault alarm relay to ensure safe
reliable operation in temperatures between -40°C and +75°C. Industrial Power Supplies:
Transition Networks’ hardened PoE injectors are certified to 25130
operate reliably in harsh environments such as those found Input: 85-264VAC, 120-370VDC
Output: 48VDC, .83A, 39.8 Watts
on factory floors, outdoor enclosures or other challenging
environments.

Features Specifications
• IEEE 802.3at PoE+ to supply 30 Watts Standards IEEE 802.3
IEEE 802.3u
• IEEE 802.3af Compatible IEEE 802.3ab
IEEE 802.3at
• Non-blocking architecture IEEE 802.3af

• Compact size Connectors (1) DATA IN RJ-45 Ethernet Port

(1) DATA OUT PoE+ RJ-45 Ethernet
• IP30 housing protection Port 30 Watts
Status LEDs PWR1 (Power): ON=primary power
• Link Pass Through connected
PWR2 (Power): ON=backup power
• Extended operating temperature connected
(-40°C to 75°C)
Dimensions Width: 1.2” [30 mm]
• DIN Rail mount / optional wall mount Depth: 3.7” [95 mm]
Height: 5.5” [140 mm]
brackets included
Power Consumption 3.53 Watts (No PoE)
33.36 Watts (1 port PoE)
Power Input 24-48VDC
Ingress Protection IP30
Environment Operating: -40°C to 75°C
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 1.3 lbs. [0.59 kg]
Compliance Safety: UL508
FCC Class A, CE Mark, EN61000-4,
EN61000-6-2, EN61000-4-2 (ESD),
EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6(CS)
EN61000-4-8 (Magnetic Field),
IEC60068-2-27(Shock),
IEC60068-2-32 (Free fall),
IEC60068-2-6 (Vibration)
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 3

SI-IES-111D-LRT
Unmanaged Hardened PoE+ Injector/Converter
(1) 100/1000Base-X SFP Port + (1) 10/100/1000Base-T PoE+ Port

Ordering Information
The SI-IES-111D-LRT is an unmanaged hardened PoE+ injector that SI-IES-111D-LRT
(1) 100/1000Base-X SFP Port
adds up to 30 Watts of power on a network segment. The gigabit speed + (1) 10/100/1000Base-T PoE+ Port
SFP port provides the ultimate flexibility by allowing fiber SFP uplink
ports with varying communication distances. Injectors are commonly
Optional Accessories (sold separately)
used to power PoE devices in locations where a power source does not Industrial Power Supplies:
exist. 25130
Transition Networks’ hardened PoE injectors are certified to operate Input: 88-264VAC, 120-370VDC
Output: 48-55VDC, 0.83A, 39.8Watts
reliably in harsh environments such as those found on factory floors,
25131
outdoor enclosures or other challenging environments. The injector is Input: 88-264VAC, 124-370VDC
safe for reliable operation in temperatures between -40°C and +75°C. Output: 48-55VDC, 1.6A, 76.88Watts

Features Specifications
• IEEE 802.3at PoE+ to supply 30 Watts Standards IEEE 802.3
IEEE 802.3x
per port IEEE 802.3u
IEEE 802.3ab
• IEEE 802.3af Compatible IEEE 802.3at
IEEE 802.3z
• Supports dual speed for SFP slot
IEEE 802.3af
• Non-blocking architecture Connectors (1) DATA IN SFP Ethernet Port
(1) DATA OUT PoE+ RJ-45 Ethernet Port 30 Watts
• Compact size
Status LEDs Copper Port: Link/ACT
• IP31 housing protection Copper Port: Gigabit Transmission
SFP Port: Link/ACT
• Link Pass Through PoE Power
Input Power
• Extended operating temperature Dimensions Width: 1.44” [36.7 mm]
(-40°C to 75°C) Depth: 3.72” [94.5 mm]
Height: 4.26” [108.4 mm]
• DIN Rail mount / optional wall mount brackets
Power Consumption 3.53 Watts (No PoE)
included 32.725 Watts (1 port PoE)
• Supports full/half duplex flow control Power Input 48-57VDC
Higher Voltage (50-53VDC) may be required for
• Supports Auto-MDI/MDI-X some high powered PD loads
Ingress Protection IP31
• Supports auto-negotiation
Environment Operating: -40°C to 75°C
• Supports store-and-forward transmission Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 1.3 lbs. [0.59 kg]
Compliance Safety: UL508
Class I, Division 2, Groups A, B, C, and D Hazardous
Locations, FCC Class A, CE Mark, EN61000-4,
EN61000-6-2, EN61000-4-2 (ESD),
EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6(CS)
EN61000-4-8 (Magnetic Field),
EN61000-6-4 (EMC),
IEC60068-2-27(Shock),
IEC60068-2-32 (Free fall),
IEC60068-2-6 (Vibration)
IEC61850-3
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 4

SI-IES-121D-LRT
Unmanaged Hardened PoE+ Injector/Converter
(1) 100/1000Base-X SFP Port + (2) 10/100/1000Base-T PoE+ Ports

Ordering Information
The SI-IES-121D-LRT is an unmanaged hardened PoE+ injector/ SI-IES-121D-LRT
converter that adds up to 30 Watts of power on two network (1) 100/1000Base-X SFP Port
segments. The gigabit speed SFP port provides the ultimate + (2) 10/100/1000Base-T PoE+ Ports
flexibility by allowing fiber SFP uplink ports with varying
communication distances. Injectors are commonly used to power Optional Accessories (sold separately)
PoE devices in locations where a power source does not exist.
Industrial Power Supplies:
Transition Networks’ hardened PoE injectors are certified to
25131
operate reliably in harsh environments such as those found Input: 88-264VAC, 124-370VDC
on factory floors, outdoor enclosures or other challenging Output: 48-55VDC, 1.6A, 76.88 Watts
environments. The injector is safe for reliable operation in
temperatures between -40°C and +75°C.

Features Specifications
Standards IEEE 802.3
• IEEE 802.3at PoE+ to supply 30 Watts
IEEE 802.3x
per port IEEE 802.3u
IEEE 802.3ab
• IEEE 802.3af Compatible IEEE 802.3at
IEEE 802.3z
• Supports dual speed for SFP slot IEEE 802.3af
• Non-blocking architecture Connectors (1) DATA IN SFP Ethernet Port
(2) DATA OUT PoE+ RJ-45 Ethernet Port 30 Watts
• Compact, space saving, size
Status LEDs Copper Port: Link/ACT
• IP31 of housing protection Copper Port: Gigabit Transmission
SFP Port: Link/ACT
• Link Pass Through PoE Power
Input Power
• Extended operating temperature Dimensions Width: 1.44” [36.7 mm]
(-40°C to 75°C) Depth: 3.72” [94.5 mm]
Height: 4.26” [108.4 mm]
• DIN Rail mount / optional wall mount brackets
Power Consumption 3.53 Watts (No PoE)
included 63.5 Watts (2 ports PoE)
• Supports full/half duplex flow control Power Input 48-57VDC
Higher Voltage (50-53VDC) may be required for
• Supports Auto-MDI/MDI-X some high powered PD loads
Ingress Protection IP31
• Supports auto-negotiation
Environment Operating: -40°C to 75°C
• Supports store-and-forward transmission Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 1.3 lbs. [0.59 kg]
Compliance Safety: UL508
Class I, Division 2, Groups A, B, C, and D Hazardous
Locations, FCC Class A, CE Mark, EN61000-4,
EN61000-6-2, EN61000-4-2 (ESD),
EN61000-4-3 (RS), EN61000-4-4 (EFT),
EN61000-4-5 (Surge), EN61000-4-6(CS),
EN61000-6-4 (EMC),
EN61000-4-8 (Magnetic Field),
IEC60068-2-27(Shock),
IEC60068-2-32 (Free fall),
IEC60068-2-6 (Vibration)
IEC61850-3
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 5

SPOEB10xx-105
Stand-alone Fast Ethernet PoE Media Converter
10/100Base-TX PoE PSE to 100Base-FX
SPOEB10xx-105 is a 10/100 Ethernet copper to fiber PoE media
converter that enables enterprises to provide power to network devices Ordering Information
over the existing CAT5 data connection. SPOEB1040-105
Transition Networks’ AC powered PoE media converters combine data 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-X SFP Slot (empty)
received over a fiber optic link with -48 VDC power; providing power
SPOEB1011-105
to Data Terminal Equipment (DTE) Power Devices (PD) over unshielded 10/100Base-TX (RJ-45) [100 m/328 ft.]
twisted pair cable. The PoE converters are Power Sourcing Equipment to 100Base-FX 1300nm multimode (ST)
(PSE) and are fully compatible with Powered Devices (PD) that comply [2 km/1.2mi.] Link Budget: 11.0 dB
with the IEEE 802.3af: 2003 standard. The converters also include SPOEB1013-105
a PD signature sensing and power monitoring features per the IEEE 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode (SC)
SPOEB1039-105 802.3af standard. Other features include Over-Current Protection, [2 km/1.2mi.] Link Budget: 11.0dB
Under-Current Detection and Fault Protection Input.
SPOEB1039-105
This feature enhanced model offers the ability to enable/disable many 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1300nm multimode (LC)
of the features as well as force port capabilities. In addition, with the [2 km/1.2 mi.] Link Budget: 11.0 dB
PSE/LPT switch enabled, a loss of Fiber RX will disable PSE power
output on the UTP port for 2 seconds to allow remote device to re-
Optional Accessories (sold separately)
initialize, also known as Powered Device Reset.
The PoE converter is fully compatible with devices that comply with the Mounting Options
IEEE 802.3af standard. The PoE converter is capable of inserting power WMBL
on data pairs or spare pair of the MDI. Wall Mount Bracket 4" [102 mm]
WMBV
Vertical Wall Mount Bracket 5" [127 mm]

Features Specifications WMBD

DIN Rail Bracket 5" [127 mm]
Standards IEEE 802.3
• External AC power supply RMS19-SA4-01
IEEE 802.3af
4-Slot Media Converter Shelf
• IEEE 802.3af Power-over-Ethernet Max Frame Size 1600 bytes
Compatible Switches SW1: Auto-Negotiation On/Off (TP)
SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off)
• 48 VDC PSE Output Voltage SW3: Duplex TP: Force Half or Full-Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full-Duplex Power Supply Included
• Signal Pair or Spare Pair Power Insertion SW5: Link Pass Through On/Off
To order the corresponding country
SW6: PSE On/Off
• PD Detection Signature specific power supply, add the
SW7: PSE/LPT on/off
SW8: Data Pairs/Spare Pairs extension from the list below to the end
• Over-Current Protection & Under- of the SKU; Ex: SPOEB1040-105-NA
Current Status LEDs Power
Fiber Link, Activity, & Duplex -NA = Country Code
Detection -NA = North America
Copper Link, Activity, Speed, & Duplex
-LA = Latin America
• Powered Device Reset PoE Status
-EU = Europe
Dimensions Width: 3.25” [82 mm] -UK = United Kingdom
• Switch selectable features and port Depth: 4.8” [120 mm] -SA = South Africa
settings Height: 1" [25 mm] -JP = Japan
-OZ = Australia
• Minimum Load Sensing Power Consumption 20 Watts (max) -BR = Brazil
Power Supply External power supply: 90 – 250 VAC Input; 48VDC Output
• Fault Protection Input
Environment Operating: 0°C to 50°C
• Auto-Negotiation Storage: -25° to +85°C
Humidity: 5% to 90% (non-condensing)
• Auto-MDI/MDIX Altitude: 0 – 10,000 ft.
Weight 2 lbs. [0.90 kg]
• Link Pass Through
Compliance EN55022:1994+A1:1996+A2:1997 Class A,
• Far-End-Fault (FEF) FCC Part 15 Subpart B, UL 1950
Warranty Lifetime
• Automatic Link Restoration

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 6

SGPOE10xx-1x0
Stand-alone Gigabit Ethernet PoE Media Converter
10/100/1000Base-T PoE PSE to 1000Base-X
Enables enterprises to provide power to network devices over the
existing CAT5 data connection. Ordering Information
Transition Networks' AC powered PoE media converters combine data SGPOE1013-100
received over a fiber optic link with -48 VDC power; providing power to 10/100/1000Base-T (RJ-45)
[100 m/328 ft.]
Data Terminal Equipment (DTE) Powered Devices (PD) over unshielded to 1000Base-SX 850nm multimode (SC)
twisted pair cable. The PoE converters are Power Sourcing Equipment [62.5/125 µm: 220 m/722 ft.] Link Budget: 8.0
(PSE) and are fully compatible with Powered Devices (PD) that comply dB [50/125 µm: 550 m/1804 ft.] Link Budget:
8.0 dB
with the IEEE 802.3af: 2003 standard. The converters also includes
SGPOE1040-110 a PD signature sensing and power monitoring feature per the IEEE SGPOE1039-100
10/100/1000Base-T (RJ-45)
802.3af standard. [100 m/328 ft.]
to 1000Base-SX 850nm multimode (LC)
This feature enhanced model offers the ability to enable/disable many [62.5/125 µm: 220 m/722 ft.] Link Budget: 8.0
of the features as well as force port capabilities (see switch section dB [50/125 µm: 550 m/1804 ft.] Link Budget:
under Specifications). 8.0 dB
SGPOE1040-100
In addition, with the PSE/LPT switch enabled, a loss of Fiber RX will 10/100/1000Base-T (RJ-45) [100 m/328 ft.]
disable PSE power output on the UTP port for 2 seconds to allow to 100/1000Base-X SFP Slot (empty)
remote device to re-initialize, also known as Powered Device Reset. SGPOE1040-110
10/100/1000Base-T (RJ-45) [100 m/328 ft.]
The PoE converter is fully compatible with devices that comply with the to (2) 100/1000Base-X SFP slots (empty)
IEEE 802.3af standard as well as select legacy PDs. The PoE converter
is capable of inserting power on data mode A or mode B pairs of the Optional Accessories (sold separately)
MDI. SFP Modules

Features Specifications Mounting Options

Standards IEEE 802.3 WMBD
• SFP ports support either 100Base or DIN Rail Mount Bracket 5" [127 mm]
IEEE 802.3af
1000Base fiber
MAC Addresses 8K WMBL
• Redundant SFP port option Wall Mount Bracket 4" [102 mm]
Max Packet Size 1632 bytes untagged
1628 bytes tagged
• IEEE 802.3af Power-over-Ethernet
Compatible Switches SW1: Auto-Negotiation TP On/Off
SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off)
• 48 VDC PSE Output Voltage SW3: Duplex TP: Force Half or Full-Duplex (SW1 off)
Power Supply Included
SW4: Duplex Fiber: Half or Full-Duplex
• Mode A or Mode B Pairs Power Insertion SW5: Auto-MDI/MDIX On/Off To order the corresponding country
SW6: PSE On/Off specific power supply, add the
• PD Detection Signature SW7: PSE/LPT on/off extension from the list below to the end
SW8: Unused of the SKU; Ex: SGPOE1013-100-NA
• PoE Legacy Detect for non-IEEE 802.3af Dimensions Width: 4.4” [112 mm] -NA = Country Code
compatible Powered Devices (PD) Depth: 5.1” [129 mm] -NA = North America
Height: 1" [25 mm] -LA = Latin America
• Over-Current Protection -EU = Europe
Power Consumption 20 Watts (max) -UK = United Kingdom
• Under-Current Detection Power Supply External AC/DC required; 48 VDC 0.67A Output; -SA = South Africa
90 – 250VAC external power supply input -JP = Japan
• Powered Device Reset -OZ = Australia
Environment Operating: 0°C to 40°C -BR = Brazil
• Minimum Load Sensing Storage: -25°C to 85°C
Humidity: 5% to 95% (non-condensing)
• Fault Protection Input Altitude: 0 – 10,000 ft.
Weight 2 lbs. [0.90 kg]
• Auto-Negotiation
Compliance EN55022:1994+A1:1996+A2:1997 Class A,
• Auto-MDI/MDIX FCC Part 15 Subpart B, UL 1950

• Link Pass Through available on Warranty Lifetime

SGPOE10xx-100
• Automatic Link Restoration
• External AC power supply

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 7

M/GE-ISW-SFP-01-PD
Hardened Mini PD 10/100/1000 Bridging
Media Converter

This hardened Gigabit Mini PD Media Converter is a PoE powered

device which provides a cost-effective method for integrating Ordering Information
fiber optic cabling into hardened or outdoor 10/100/1000 UTP M/GE-ISW-SFP-01-PD
environments. The device is powered through the RJ-45 copper port PoE Powered Hardened
when connected to power sourcing equipment, meaning no separate Mini10/100/1000Base-T (RJ-45) to
100/1000Base-X Open SFP Slot
power connection is required. With its miniature size, the Mini offers a
space saving alternative while it converts copper to fiber within a very
small footprint. Optional Accessories (sold separately)

M/GE-ISW-SFP-01-PD WMBM
The M/GE-ISW-SFP-01-PD supports a wide operating temperature Wall Mount Bracket Mini
range, is powered through the copper cabling, offers multiple mounting SFP Modules
methods, and is supported by Transition Networks’ Lifetime Warranty. Supports Hardened Grade SFP Modules
This problem solver will alleviate power concerns and ensure a quick
and trouble-free installation in harsh outdoor or hardened applications.

Features Specifications
• IEEE 802.3af PD Power Input from RJ-45 Standards IEEE 802.3
TP interface IEEE 802.3u
IEEE 802.3z
• Unit & Port LEDs allow for quick status IEEE 802.3x
information IEEE 802.3af
• Auto-Negotiation Max Frame Size 10240 bytes
Status LEDs PWR (Power): (below RJ-45) ON = Lit for normal operation
• Fixed Full-Duplex on Fiber
FX-Link/Act (Fiber Link/Activity): (Upper Left on RJ-45)
• Auto-MDI/MDIX on copper port On = link; Flashing = Activity
TX-Link/Act (Copper Link/Activity): (Upper Right on RJ-45)
• Active Link Pass Through On = link; Flashing = Activity
• Jumbo Frame (up to 10240 bytes) Dimensions Width: 1.8” [46 mm]
Depth: 3.3” [85 mm]
• Multiple mounting options Height: 0.85” [22 mm]
-- DIN Rail clip and Velcro included Power Consumption 1.8 Watts
-- Wall mount bracket sold separately Power Input IEEE 802.3af supplied through TP RJ-45
PoE Power Classification Class 1 Powered Device (0.44 Watts - 3.84 Watts)
Environment Operating: -40°C to +75°C
Storage: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft.
Weight 0.40 lbs. [0.18 kg]
Compliance FCC Class A, CISPR22/EN55022 Class A, EN55024, CE Mark
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 8

EO2PSE4052-111 & EO2PD4052-111
Ethernet Over 2-Wire Extender With PoE+
(1) 10/100/1000Base RJ-45/SFP Combo Port + (1) 1000Base-T RJ-45
Port or 2-Wire Terminal Block
Transition Networks Ethernet Over 2-Wire Extender With PoE+ provides
the ability to quickly and easily upgrade Ethernet networks with modern Ordering Information
PoE powered IP devices without the need to replace the existing *EO2PSE4052-111 (Local)
copper wire infrastructure. The extenders leverage existing 18-24 AWG (1) 10/100/1000Base-T RJ-45 or
(1) 100/1000Base-X SFP Combo Port and
unshielded twisted pair (CAT 5, CAT 3 and other 2-wire phone wire) (1) 10/100/1000Base RJ-45 or
cabling infrastructure to extend the Ethernet network at near Gigabit 2-Wire Terminal Block Combo Port
speeds and provide data and power to IP devices in remote locations, *EO2PD4052-111 (Remote)
saving time and money over installing new cable. (1) 10/100/1000Base-T RJ-45 or
2-Wire Terminal Block Combo Port and
The Ethernet Over 2-Wire Extenders With PoE+ are used in pairs, with a (1) 10/100/1000Base-T IEEE 802.3af/at or
local or remote device at opposite ends of the copper link. The extenders provide flexibility for either copper or fiber (1) 100/1000Base-X SFP Combo Port
Ethernet connections. The Local device offers a 10/100/1000Base-T RJ-45 and 100/1000Base-X open SFP combo
*Note: Product must be used in pairs. A properly
port and a RJ-45 or 2-wire terminal block connection to provide safety extra low voltage (SELV) power over 2-wire isolated power source is required for each Local
to the Remote device. The Remote device receives power through the RJ-45 or 2-wire terminal block connection unit and an external power supply is optional for
Remote units depending on power requirements.
and provides a 10/100/1000Base-T RJ-45 output with PoE+ power or a 100/1000Base-X open SFP combo port
connection for IP cameras, wireless access points or other PoE powered end devices. Industrial Power Supplies (sold separately)
Power for the Local device can be supplied through a properly isolated +48VDC power source or through the 25148 (Power Adapter)
designated 90 Watt power adapter. Power for the Remote device can be supplied with PoE from the Local unit, 90 ~ 264 VAC; 127 ~ 370 VDC
(Country specific power cord included)
through a properly isolated +48VDC power source, or through the designated power adapter for providing redundant
power or for additional power requirements at the Remote device.
Mounting Options (sold separately)
The Ethernet Over 2-Wire Extenders With PoE+ are supplied with a web GUI, which allows password-protected WMBL
access to various configuration options of both the Local and Remote devices through a single IP address. It also Wall Mount Bracket 4" [102 mm]
allows easy upgrades to firmware. WMBD
DIN Rail Bracket 5" [127 mm]

Features Specifications WMBD-F

DIN Rail Bracket (flat) 3.3” [82 mm]
Standards IEEE 802.1p
• Copper or fiber combo Ethernet port WMBV
IEEE 802.1Q Vertical Wall Mount Bracket 5" [127 mm]
• IEEE 802.3af/at compliant Remote PoE+ IEEE 802.3
IEEE 802.3ab RMS19-SA4-02
port for powering cameras or other IEEE 802.3af/at 4-Slot Media Converter Shelf, includes 4
remote devices IEEE 802.3az brackets and 3 slot blanks
IEEE 802.3u
• Full PoE+ at 335-1,500 ft. over a single IEEE 802.3x
pair or 1,500-6,800 ft. over multiple IEEE 802.3z
pairs* (dependent on cable type) Ports Ethernet: 10/100/1000Base-T RJ-45 or
100/1000Base-X SFP Combo
Features Continued
• Half-Gigabit Ethernet speeds over UTP 2-Wire: 10/100/1000Base-T RJ-45
cable at distances of 660 feet (200m) or 2-wire terminal block
or Fast Ethernet speeds at 2000 feet PoE: 10/100/1000Base-T RJ-45 PoE+
(610m) (dependent on wire gauge*) Status LEDs Power, Copper Power, Copper ACT, Copper Security,
Combo Port Link/ACT, PoE+
• Proprietary SELV classification prevents
unintended power delivery to non- Dimensions Width: 3.25” [82.5 mm]
Depth: 5.38" [136.7 mm]
Transition Networks devices Height: 1.25” [31.75 mm]
• Power monitoring Power Consumption 45 Watts (max)
Power Input 48 VDC
• Auto Power Reset (APR) and power-
saving mode Ingress Protection IP30
Environment Operating: 0°C to +65°C
• Web browser configurable (Industrial +85°C SFP modules must be used
above 50°C ambient temperature)
• Plug-and-Play installation Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
• Field upgradeable firmware Altitude: 0 – 10,000 ft.
*Minimum distance stated is 24 AWG cable DC Weight 1.05 lbs. [0.48 kg]
resistance of 29.9 ohm per 1000 ft. Cable with Compliance Safety: External Power Supply: CE Mark;
less DC resistance will increase distance. Use Emissions: FCC Part 15, CISPR22/EN55022
Class A; Immunity: EN55024
of multiple pairs vs a single pair will increase
Warranty 5 Years
distance and available power. To determine
power distance for specific cable types, refer to
online calculator.

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 9

EOCPSE4020-110 & EOCPD4020-110
Ethernet Over Coax Extender With PoE+
(1) 100/1000Base RJ-45/SFP Combo Port + (1) 1000Base Coax BNC Port

Transition Networks Ethernet Over Coax Extender With PoE+ provides

the ability to quickly and easily upgrade older analog surveillance Ordering Information
systems with modern PoE powered IP video cameras without the *EOCPSE4020-110 (Local)
need to replace the wiring infrastructure. These products leverage (1) 10/100/1000Base-T Port
the existing CCTV 75 ohm coax infrastructure to extend the Ethernet or (1) 100/1000Base-X SFP Combo Port
+ (1) 1000Base BNC Port
network and provide power to remote camera locations, saving time
and money over installing new cable. These extenders communicate *EOCPD4020-110 (Remote)
(1) 10/100/1000Base-T PoE+ Port IEEE 802.3af/
at near Gigabit speeds and can also be used in other applications at
besides surveillance to extend Ethernet networks over an existing coax or (1) 100/1000Base-X SFP Combo Port
infrastructure. + (1) 1000Base BNC Port

The Ethernet Over Coax Extenders with PoE+ are used as a pair of devices, with a local or remote device at opposite *Note: Product must be used in pairs. A properly
isolated power source is required for each Local
ends of the coax cable. The extenders provide much flexibility for either copper or fiber Ethernet connections. The unit and an external power supply is optional for
Local device offers both a 10/100/1000Base-T RJ-45 and 100/1000Base-X SFP connection, and provides a Gigabit Remote units depending on power requirements.
BNC connection with power over coax to the Remote device. The Remote device receives power over coax through Industrial Power Supplies (sold separately)
the BNC connection and provides both a 100/1000Base-X SFP and a 10/100/1000Base-T RJ-45 connector output 25148 (Power Adapter)
with PoE+ power for IP cameras, wireless access points or other PoE powered end devices. Power for the Local 90 ~ 264 VAC; 127 ~ 370 VDC
(Country specific power cord included)
device can be supplied through a properly isolated +48VDC power source or through the designated 90 Watt power
adapter. The designated power adapter is optional for providing redundant power at the Remote device.
Mounting Options (sold separately)
The Ethernet Over Coax Extenders With PoE+ are supplied with a web GUI, which allows password-protected access WMBL
to various configuration options of both the Local and Remote devices through a single IP address. It also allows easy Wall Mount Bracket 4" [102 mm]
upgrades to firmware. WMBD
DIN Rail Bracket 5" [127 mm]

Features Specifications WMBD-F

DIN Rail Bracket (flat) 3.3” [82 mm]
Standards IEEE 802.1p
• Copper or fiber combo Ethernet port WMBV
IEEE 802.1Q
IEEE 802.3 Vertical Wall Mount Bracket 5" [127 mm]
• Remote PoE+ Port IEEE 802.3at for
IEEE 802.3ab
powering cameras or other remote IEEE 802.3af/at
RMS19-SA4-02
devices 4-Slot Media Converter Shelf, includes 4
IEEE 802.3az
brackets and 3 slot blanks
IEEE 802.3u
• Full PoE+ at 400 ft. or less* IEEE 802.3x
(dependent on cable type) IEEE 802.3z

• Coax distance in excess of 1000 ft. at Ports Ethernet: 10/100/1000Base-T RJ-45 or

near Gigabit speeds or 2000 ft. at Fast
100/1000Base-X SFP Combo
Coax: 1000Base BNC Features Continued
Ethernet speeds PoE: 10/100/1000Base-T RJ-45 PoE+
(dependent on remote power Status LEDs Power, Coax Power, Coax ACT,
requirements) Coax Security, Combo Port Link/ACT, PoE+
• Proprietary coax end device Dimensions Width: 3.25” [82.5 mm]
classification prevents unintended Depth: 1.25" [31.75 mm]
Height: 5.38” [136.7 mm]
power delivery to non-Transition
Networks devices Power Consumption 45 Watts (max)
Power Input 48 VDC
• Power monitoring
Ingress Protection IP30
• Auto Power Reset (APR) and power- Environment Operating: 0°C to +65°C
saving mode (Industrial +85°C SFP modules must be used
above 50°C ambient temperature)
• Web browser configurable Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
• Plug-and-Play installation Altitude: 0 – 10,000 ft.
• Field upgradeable firmware Weight 1.05 lbs. [0.48 kg]
Compliance Safety: External Power Supply: CE Mark;
• Managed through a single IP address Emissions: FCC Part 15, CISPR22/EN55022
Class A;
Immunity: EN55024
*Typical RG59U cable DC resistance of 50 ohm
Warranty 5 Years
per 1000 ft. Cable with less DC resistance
may increase distance. To determine power
distance for specific cable types, refer to online
calculator.

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 10

S8TXATA
Unmanaged Fast Ethernet PoE Switch
(8) 10/100/Base-TX PoE+ Ports

The S8TXATA, (8) port Fast Ethernet switch,

Ordering Information
integrates 100Mbps Fast Ethernet and 10Mbps S8TXATA
(8) 10/100Base-TX PoE+ Ports
Ethernet network capabilities. (Includes 19” Rack Mount Ears)
Featuring IEEE 802.3af and IEEE 802.3at compliant
Power-over-Ethernet capability over (8) ports.
The S8TXATA is easy to install and does not require
configuration. The PoE ports automatically detect Power Cord Included
and supply power to devices. To order the corresponding country
specific power cord, add the extension
from the list below to the end of the
SKU; Ex: S8TXATA-NA
-NA = Country Code
-NA = North America
-LA = Latin America
Features Specifications -EU = Europe
-UK = United Kingdom
Standards IEEE 802.3 -SA = South Africa
• Auto-Negotiation -JP = Japan
IEEE 802.3u
IEEE 802.1p -OZ = Australia
• Wire-speed packet filtering and -BR = Brazil
IEEE 802.3x
forwarding rate IEEE 802.3af
IEEE 802.3at
• Supports IEEE 802.3x flow control IEEE 802.3az
for Full-duplex mode
Connectors (8) 10/100 RJ-45 ports
• Supports IEEE 802.1p QoS Protocols CSMA/CD
• Fan-less design Technology Store-and-forward switching architecture
MAC Address 2K MAC address table
• LED indicators for monitoring power,
link, activity and speed Backplane 1.6 Gbps
Dimensions Width: 11.02" [280 mm]
• Supports IEEE 802.3az Energy-Efficient Depth: 7.04" [179 mm]
Ethernet Height: 1.75" [44.5 mm]

• Offers a Unified Communications device Power Consumption 130 Watts (full PoE load)
with an open standard Power Input Internal power: 100-240VAC
Power-over-Ethernet Max output power 120 Watts
Max output power per port up to 30 Watts
PoE Features Provide power on all (8) copper ports
Environment Operating: 0°C to 50°C
• Compliant with IEEE 802.3at PoE+ Humidity: 10% to 90% (non-condensing)

• Compliant with IEEE 802.3af PoE Weight 4.65 lbs. [2.1 kg]
Compliance Safety: LVD
• Provide up to 30 Watts to PD Emissions: FCC Class A, CE

• Total PoE budget 120 Watts Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 11

SM8TAF2DPA
Managed Gigabit PoE+ Switch
(8) 10/100/1000Base-T Ports + (2) 100/1000Base-X Dual Speed SFP ports

The SM8TAF2DPA is a (10) port Gigabit Ethernet

smart switch providing (8) 10/100/1000 Base-T Ordering Information
ports with IEEE 802.3at Power-over-Ethernet SM8TAF2DPA
capability, and it has (2) additional dual Speed SFP (8) 10/100/1000Base-T PoE Ports
+ (2) 100/1000Base-X SFP
ports. Includes 19” Rack Mount ears

Power Cord Included

To order the corresponding country
Features Specifications specific power cord, add the extension
from the list below to the end of the
Standards IEEE 802.3 SKU; Ex: SM8TAF2DPA-NA
• Support Jumbo Frame up to 9K bytes
IEEE 802.3u
IEEE 802.3z -NA = Country Code
• Authentication – RADIUS 802.1x -NA = North America
IEEE 802.3x
-LA = Latin America
• Security - Support SSH/SSL IEEE 802.3ad -EU = Europe
IEEE 802.1D -UK = United Kingdom
• Port based or tagged (802.1Q) VLAN IEEE 802.1w -SA = South Africa
IEEE 802.1s -JP = Japan
• Bandwidth Allocation IEEE 802.1Q -OZ = Australia
IEEE 802.1p -BR = Brazil
• DHCP Snooping including option 82 IEEE 802.1ad
IEEE 802.1AB
• LLDP (Link Layer Discovery Protocol) IEEE 802.3af

• Port Mirroring
IEEE 802.3at
PoE Features
Connectors (8 )10/100/1000 RJ-45
(2) 100/1000 SFP ports • Compliant with IEEE 802.3at PoE+
• Port Security, MAC Filter/IP Filter
Protocols CSMA/CD
• Compliant with IEEE 802.3af PoE
• Loop detection and prevention Technology Store-and-forward switching architecture
• Supplier 53 – 58VDC power to PD
• Web Management, Telnet, SNMP V1/ MAC Address 8K MAC address table
V2c /V3 Backplane 20 Gbps • Provide up to 30 Watts
output for (2) ports or
• Supports IEEE 802.3ad port trunk with Dimensions Width: 12.99” [330 mm]
Depth: 8.03” [204 mm] up to 15 Watts output for (4) ports or
link aggregation control protocol (LACP).
Height: 1.69” [43 mm] up to 7.5 Watts for (8) ports
The trunk group up to 5 and maximum
trunk port member up to 8 ports. Power Input Internal power: 100-240VAC • Power Management:
Power-over-Ethernet Max PoE power budget 75 Watts - Enable/Disable per port
• Support IGMP Snooping V1/V2/V3, IGMP Max output power per port up to - Priority setting per port
immediate leave 30 Watts
Data-pairs mode
- Overloading Protection per port
• Supports 8 egress queues per port Max current: 1.7A - Power Level setting per port
enable differentiated management of Provide power on all 8 copper ports
up to 8 traffic types. Strict scheduling Environment Operating: 0°C to 50°C
and WRR Humidity: 10% to 90% (non-condensing)

• Supports IEEE 802.1s MSTP, IEEE Weight 9 lbs. [4.82 kg]

802.1w RSTP and IEEE 802.1d STP Compliance Safety: CSA certified
Emissions: FCC Class A, CE
• Port Based VLAN, IEEE 802.1Q tag- Warranty Lifetime
based, QinQ, 4094 VLAN entries, Voice
VLAN, Private VLAN
• Firmware Update, configure backup/
restore through Web GUI
• Supports IPv4/IPv6 dual protocol stack

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 12

SM8TAT2SA
Smart Managed PoE+ Switch
(8) 10/100/1000Base-T Ports + (2) 100/1000 SFP Slots

This switch is a next generation smart managed switch with 20Gbps

switching capacity. It provides (8) 10/100/1000Base-T copper ports Ordering Information
with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual SM8TAT2SA
speed SFP slots. The embedded Device Management System (DMS) (8) 10/100/1000Base-T
provides the benefits of ease of use in the IP surveillance, wireless + (2) 100/1000 SFP Slots
(includes 19” rack mount brackets)
Access Point and other applications. The DMS capability built into the
switches is new from Transition Networks and provides time-saving
features enabling security integrators or network administrators to
establish and document a baseline deployment, automatically discover
and remotely configure attached IP-powered devices (PDs). Power Cord Included
To order the corresponding country
specific power cord, add the extension
Features Specifications from the list below to the end of the
Standards IEEE 802.3 SKU; Ex: SM8TAT2SA-NA
• IPv6 Access Management
IEEE 802.3u -NA = Country Code
• Support Jumbo Frame up to 9K bytes IEEE 802.3z -NA = North America
IEEE 802.3ae -LA = Latin America
• Authentication – RADIUS, TACACS+ IEEE 802.3x -EU = Europe
IEEE 802.3ad -UK = United Kingdom
IEEE 802.1D -SA = South Africa
• DHCP Relay, DHCP Snooping, DHCP -JP = Japan
IEEE 802.1w
Server -OZ = Australia
IEEE 802.1s
-BR = Brazil
IEEE 802.1Q
• L2/L3/L4 ACLs Support MAC ACL, IP
IEEE 802.1p
standard/extended ACL IEEE 802.1ad
• LLDP (Link Layer Discovery Protocol)
IEEE 802.1AB
IEEE 802.3af Software Features
IEEE 802.3at
• IEEE 802.3az Energy Efficiency • Management: Web Management, SNMP
Connectors (8) 10/100/1000 RJ-45
V1/V2c/V3, Telnet, CLI
• IP Source Guard, Port Security (2) 100/1000 SFP
Protocols CSMA/CD • Port Trunk: Supports IEEE 802.3ad
• Syslog
Technology Store-and-Forward switching architecture port trunk with link aggregation control
protocol (LACP) and static trunk.
PoE Features MAC Address
Backplane
8K MAC address table
20 Gbps • Multicast: Support IGMP Snooping V1/
• Compliant with IEEE 802.3at PoE+ V2, MVR, MLD Snooping V1/V2
Dimensions Width: 8.66” [220 mm]
Depth: 9.53” [242 mm]
• Compliant with IEEE 802.3af PoE • Quality of Service: Supports 8 hardware
Height: 1.73” [44 mm]
queues. Strict priority and WRR, Ingress
• PoE configuration Power Input 100-240VAC policer, Egress shaping and per port
Power-over-Ethernet Max PoE budget 130 Watts rate limiting
• Auto Power Reset (APR) 30 Watts for (4) ports simultaneously
15.4 Watts for (8) ports simultaneously • Spanning Tree: Supports IEEE 802.1s
Surge Protection 6KV MSTP, IEEE 802.1w RSTP and IEEE
802.1d STP Compliant
Environment Operating: 0°C to +50°C
Humidity: 10% to 90% (non-condensing) • VLAN: Port Based VLAN, IEEE 802.1Q
Weight 4.4 lbs. [2.0 kg] tag-based, up to 4k VLAN entries, QinQ,
Compliance FCC Class A, CE MAC based VLAN, Private VLAN
Safety: IEC60950
• Firmware Update through TFTP and
Warranty Lifetime HTTP
• Device Management System (DMS)
-- Graphical Monitoring: Topology view, Floor view,
Map View
-- Grouping, Batch update

-- Find my switch

-- Traffic Monitoring

www.transition.com Transition Networks • Switches Catalog | 13

SM16TAT2SA
Smart Managed PoE+ Switch
(16) 10/100/1000Base-T Ports + (2) 100/1000 SFP Slots

This switch is a next generation smart managed switch with 36Gbps

switching capacity. It provides (16) 10/100/1000Base-T copper ports Ordering Information
with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual SM16TAT2SA
speed SFP slots. The embedded Device Management System (DMS) (16) 10/100/1000Base-T
provides the benefits of ease of use in the IP surveillance, wireless + (2) 100/1000 SFP Slots
(includes 19” rack mount brackets)
Access Point and other applications. The DMS capability built into the
switches is new from Transition Networks and provides time-saving
features enabling security integrators or network administrators to
establish and document a baseline deployment, automatically discover
and remotely configure attached IP-powered devices (PDs). Power Cord Included
To order the corresponding country
specific power cord, add the extension
Features Specifications from the list below to the end of the
SKU; Ex: SM16TAT2SA-NA
Standards IEEE 802.3
• IPv6 Access Management -NA = Country Code
IEEE 802.3u
IEEE 802.3z -NA = North America
• Support Jumbo Frame up to 9K bytes -LA = Latin America
IEEE 802.3ae -EU = Europe
• Authentication – RADIUS, TACACS+ IEEE 802.3x -UK = United Kingdom
IEEE 802.3ad -SA = South Africa
• DHCP Relay, DHCP Snooping, DHCP IEEE 802.1D -JP = Japan
IEEE 802.1w -OZ = Australia
Server -BR = Brazil
IEEE 802.1s
IEEE 802.1Q
• L2/L3/L4 ACLs Support MAC ACL, IP
IEEE 802.1p
standard/extended ACL IEEE 802.1ad
• LLDP (Link Layer Discovery Protocol)
IEEE 802.1AB
IEEE 802.3af
Software Features
IEEE 802.3at • Management: Web Management, SNMP
• IEEE 802.3az Energy Efficiency
Connectors (16) 10/100/1000 RJ-45 V1/V2c/V3, Telnet, CLI
• IP Source Guard, Port Security (2) 100/1000 SFP
• Port Trunk: Supports IEEE 802.3ad
Protocols CSMA/CD
• Syslog port trunk with link aggregation control
Technology Store-and-Forward switching architecture protocol (LACP) and static trunk.
PoE Features MAC Address 8K MAC address table
• Multicast: Support IGMP Snooping V1/
Backplane 36 Gbps
• Compliant with IEEE 802.3at PoE+ V2, MVR, MLD Snooping V1/V2
Dimensions Width: 17.4” [442 mm]
• Compliant with IEEE 802.3af PoE Depth: 8.3” [211 mm] • Quality of Service: Supports 8 hardware
Height: 1.73” [44 mm] queues. Strict priority and WRR, Ingress
• PoE configuration Power Input 100-240VAC policer, Egress shaping and per port
Power-over-Ethernet Max PoE budget 250 Watts
rate limiting
• Auto Power Reset (APR)
30 Watts for (8) ports simultaneously
• Spanning Tree: Supports IEEE 802.1s
15.4 Watts for (16) ports simultaneously
MSTP, IEEE 802.1w RSTP and IEEE
Surge Protection 6KV 802.1d STP Compliant
Environment Operating: 0°C to +50°C
Humidity: 10% to 90% (non-condensing) • VLAN: Port Based VLAN, IEEE 802.1Q
Weight 6.6 lbs. [3.0 kg]
tag-based, up to 4k VLAN entries, QinQ,
MAC based VLAN, Private VLAN
Compliance FCC Class A, CE
Safety: IEC60950 • Firmware Update through TFTP and
Warranty Lifetime HTTP
• Device Management System (DMS)
-- Graphical Monitoring: Topology view, Floor view,
Map View
-- Grouping, Batch update

-- Find my switch

-- Traffic Monitoring

www.transition.com Transition Networks • Switches Catalog | 14

SM24TAT2SA
Smart Managed PoE+ Switch
(24) 10/100/1000Base-T Ports + (2) 100/1000 SFP Slots

This switch is a next generation smart managed switch with 52Gbps

switching capacity. It provides (24) 10/100/1000Base-T copper ports Ordering Information
with IEEE 802.3at PoE+ capability and (2) additional 100/1000 dual SM24TAT2SA
speed SFP slots. The embedded Device Management System (DMS) (24) 10/100/1000Base-T
provides the benefits of ease of use in the IP surveillance, wireless + (2) 100/1000 SFP Slots
(includes 19” rack mount brackets)
Access Point and other applications. The DMS capability built into the
switches is new from Transition Networks and provides time-saving
features enabling security integrators or network administrators to
establish and document a baseline deployment, automatically discover
and remotely configure attached IP-powered devices (PDs). Power Cord Included
To order the corresponding country
specific power cord, add the extension
Features Specifications from the list below to the end of the
SKU; Ex: SM24TAT2SA-NA
Standards IEEE 802.3
• IPv6 Access Management -NA = Country Code
IEEE 802.3u
-NA = North America
• Support Jumbo Frame up to 9K bytes IEEE 802.3z -LA = Latin America
IEEE 802.3ae -EU = Europe
• Authentication – RADIUS, TACACS+ IEEE 802.3x -UK = United Kingdom
IEEE 802.3ad -SA = South Africa
• DHCP Relay, DHCP Snooping, DHCP IEEE 802.1D -JP = Japan
IEEE 802.1w -OZ = Australia
Server -BR = Brazil
IEEE 802.1s
IEEE 802.1Q
• L2/L3/L4 ACLs Support MAC ACL, IP
IEEE 802.1p
standard/extended ACL IEEE 802.1ad
• LLDP (Link Layer Discovery Protocol)
IEEE 802.1AB
IEEE 802.3af
Software Features
IEEE 802.3at • Management: Web Management, SNMP
• IEEE 802.3az Energy Efficiency
Connectors (24) 10/100/1000 RJ-45 V1/V2c/V3, Telnet, CLI
• IP Source Guard, Port Security (2) 100/1000 SFP
• Port Trunk: Supports IEEE 802.3ad
Protocols CSMA/CD
• Syslog port trunk with link aggregation control
Technology Store-and-Forward switching architecture protocol (LACP) and static trunk.
PoE Features MAC Address 8K MAC address table
• Multicast: Support IGMP Snooping V1/
Backplane 52 Gbps V2, MVR, MLD Snooping V1/V2
• Compliant with IEEE 802.3at PoE+
Dimensions Width: 17.4” [442 mm]
• Compliant with IEEE 802.3af PoE Depth: 8.3” [211 mm] • Quality of Service: Supports 8 hardware
Height: 1.73” [44 mm] queues. Strict priority and WRR, Ingress
• PoE configuration Power Input 100-240VAC policer, Egress shaping and per port
rate limiting
• Auto Power Reset (APR) Power-over-Ethernet Max PoE budget 370 Watts
30 Watts for (12) ports simultaneously • Spanning Tree: Supports IEEE 802.1s
15.4 Watts for (24) ports simultaneously
MSTP, IEEE 802.1w RSTP and IEEE
Surge Protection 6KV 802.1d STP Compliant
Environment Operating: 0°C to +50°C
Humidity: 10% to 90% (non-condensing) • VLAN: Port Based VLAN, IEEE 802.1Q
tag-based, up to 4k VLAN entries, QinQ,
Weight 6.6 lbs. [3.0 kg]
MAC based VLAN, Private VLAN
Compliance FCC Class A, CE
Safety: IEC60950 • Firmware Update through TFTP and
Warranty Lifetime HTTP
• Device Management System (DMS)
-- Graphical Monitoring: Topology view, Floor view,
Map View
-- Grouping, Batch update

-- Find my switch

-- Traffic Monitoring

www.transition.com Transition Networks • Switches Catalog | 15

SM8TAT2DPA
Managed Layer 2 Gigabit PoE+ Switch
(8) 10/100/1000Base-T Ports + (2) 100/1000Base-X SFP/RJ-45 Ports
This switch is a high performance Layer 2 managed
PoE+ switch with (8) 10/100/1000Base-T ports with full Ordering Information
IEEE 802.3af Power-over-Ethernet capability, and (2) SM8TAT2DPA
(8) 10/100/1000Base-T PoE+ ports
additional RJ-45 100/1000 SFP combo ports. + (2) 100/1000Base-X SFP/RJ-45 ports
Key benefits include: secure and high performance SM8TAT2DPA
connections, flexible copper/fiber dual uplinks, and (8) 10/100/1000Base-T PoE+ ports
+ (2) 100/1000Base-X SFP/RJ-45 ports
unified communications with open standard.
(19” Rack Mount Brackets included)

Optional Accessories (sold separately)

SFP Modules

Mounting Brackets
RMSM8-01
19“ Rack Mount Bracket.
BRSM8-01
Wall Mount brackets

Features Specifications
• Support Jumbo Frame up to 9K bytes Standards IEEE 802.3
IEEE 802.3u Power Cord Included
• Authentication – RADIUS 802.1x, IEEE 802.3z
To order the corresponding country
TACACS+ IEEE 802.3x
IEEE 802.3ad specific power cord, add the extension
IEEE 802.1D from the list below to the end of the
• Security - Support SSH/SSL SKU; Ex: SM8TAT2DPA-NA
IEEE 802.1w
• Port based or tagged (802.1Q) VLAN, IEEE 802.1s -NA = Country Code
QinQ double tag VLAN, Guest VLAN IEEE 802.1Q -NA = North America
IEEE 802.1p -LA = Latin America
• Bandwidth Allocation Ingress and IEEE 802.1ad -EU = Europe
IEEE 802.1AB -UK = United Kingdom
Egress IEEE 802.3af -SA = South Africa
IEEE 802.3at -JP = Japan
• DHCP Snooping including option 82 -OZ = Australia
Connectors (1) RJ-45 Console Port -BR = Brazil
• IP-MAC binding for security (8) 10/100/1000 RJ-45
(2) 100/1000 SFP/RJ-45 ports
• ACL based on Ethernet Type / ARP /
Protocols CSMA/CD
IPv4 for packets permit or deny, rate
limitation and port copy Technology Store-and-forward switching architecture Features (Continued)
MAC Address 8K MAC address table • Web Management, SNMP V1/V2c/V3,
• LLDP (Link Layer Discovery Protocol) Telnet, CLI
Backplane 20 Gbps
• SYSLOG for device management Dimensions Width: 11.02” [280 mm] • Supports IEEE 802.3ad port trunk with
Depth: 9.06” [230 mm] link aggregation control protocol (LACP)
• IEEE 802.3az Energy Efficiency LLDP Height: 1.73” [44 mm]
• Compliant with IEEE 802.3af Power- Power Input Internal power: 100-240VAC • Support IGMP Snooping V1/V2/V3, IGMP
over-Ethernet and IEEE 802.3at Power- Power-over-Ethernet+ Max output Proxy and GVRP
power 130 Watts:
over-Ethernet+ 30 Watts for (4) ports simultaneously • Supports 8 hardware queues with Strict
15.4 Watts for all (8) ports simultaneously priority and WRR. Per port bandwidth
• Advanced PoE Management functions
Environment Operating: 0°C to 40°C management
• PoE detection mode, PoE Autocheck, Humidity: 5% to 90% (non-condensing)
PoE power delay and PoE Scheduling • Supports IEEE 802.1s MSTP, IEEE
Weight 6 lbs. [2.72 kg]
802.1w RSTP and IEEE 802.1d STP
• Power cord safety clip is included Compliance Safety: LVD Compliant
Emissions: FCC Class A, CE
Warranty Lifetime • Port Based VLAN, IEEE 802.1Q tag-
based, 4096 VLAN entries, MAC-based
VLAN, Private VLAN Edge， Priority VLAN
override
• Firmware Update, configure backup/
restore through Web GUI and TFTP
• Support IPv4/IPv6 dual protocol stack

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 16

SM8TAT2DPB
Managed PoE+ Switch
(8) 10/100/1000Base-T Ports + (2) 100/1000 SFP/RJ-45 Combo Ports

This switch is a high performance Layer 2 managed switch with

20Gbps switching capacity. It provides (8) 10/100/1000Base-T copper Ordering Information
ports with IEEE 802.3at PoE+ capability and (2) additional 100/1000 SM8TAT2DPB
dual speed SFP/RJ-45 Combo ports. (8) 10/100/1000Base-T
+ (2) 100/1000 SFP/RJ-45 Combo
(includes 19” rack mount brackets)

Power Cord Included

To order the corresponding country
Features Specifications specific power cord, add the extension
from the list below to the end of the
Standards IEEE 802.3 SKU; Ex: SM8TAT2DPB-NA
• Support IPv4/IPv6 dual protocol stack
IEEE 802.3u
IEEE 802.3z -NA = Country Code
• Support Jumbo Frame up to 9K bytes -NA = North America
IEEE 802.3ae
IEEE 802.3x -LA = Latin America
• Authentication – RADIUS, TACACS+ -EU = Europe
IEEE 802.3ad
-UK = United Kingdom
• Security - Support SSH v1/SSH v2/SSL IEEE 802.1D -SA = South Africa
IEEE 802.1w -JP = Japan
• Port based or tagged (802.1Q) VLAN, IEEE 802.1s -OZ = Australia
IEEE 802.1Q -BR = Brazil
MAC based , Management VLAN and
IEEE 802.1p
Private VLAN Edge IEEE 802.1ad
IEEE 802.1AB
• DHCP Relay, DHCP Server IEEE 802.3af
IEEE 802.3at
Software Features
• L2/L3/L4 ACLs Support MAC ACL, IP
standard/extended ACL Connectors (1) RJ Console Port • Management: Web Management, SNMP
(8) 10/100/1000 RJ-45 V1/V2c/V3, Telnet, CLI
• LLDP (Link Layer Discovery Protocol) (2) 100/1000 SFP/RJ-45 Combo
Protocols CSMA/CD • Port Trunk: Supports IEEE 802.3ad
• IEEE 802.3az Energy Efficiency port trunk with link aggregation control
Technology Store-and-Forward switching architecture
protocol (LACP) and static trunk.
• IP Source Guard, Port Security MAC Address 8K MAC address table
• IGMP: Support IGMP Snooping V1/
Backplane 20 Gbps
V2/V3, GVRP, IGMP Proxy, and IGMP
Dimensions Width: 8.66” [220 mm]
PoE Features Depth: 9.53” [242 mm]
Querier
Height: 1.73” [44 mm] • Quality of Service: Supports 8 hardware
• Compliant with IEEE 802.3at PoE+
Power Input 100-240VAC queues. Strict priority and WRR
• Compliant with IEEE 802.3af PoE Power-over-Ethernet Max PoE budget 130 Watts • Spanning Tree: Supports IEEE 802.1s
30 Watts for (4) ports simultaneously
• 802.1AB LLDP-MED Configuration 15.4 Watts for (8) ports simultaneously MSTP, IEEE 802.1w RSTP and IEEE
802.1d STP Compliant
• PoE configuration Surge Protection 6KV
Environment Operating: 0°C to +45°C • VLAN: Port Based VLAN, IEEE 802.1Q
• PoE Scheduling Humidity: 10% to 90% (non-condensing) tag-based, up to 4k VLAN entries, QinQ,
• Auto Power Reset (APR) Weight 5.1 lbs. [2.3 kg] MAC based VLAN, Private VLAN, Voice
VLANs and Management VLAN
Compliance FCC Class A, CE
• DHCP per Port Safety: IEC60950 • Firmware Update, configure backup/
Warranty 5 Years restore through TFTP and HTTP
• Device management System: Graphic
Monitoring, Grouping, Traffic Monitoring
• Static Routing

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 17

SM16TAT2DPA
Managed PoE+ Switch
(16) 10/100/1000Base-T Ports + (2) 100/1000 SFP/RJ-45 Combo Ports

This switch is a high performance Layer 2 managed

switch with 36Gbps switching capacity. It provides (16) Ordering Information
10/100/1000Base-T copper ports with IEEE 802.3at SM16TAT2DPA
PoE+ capability, it has (2) additional 100/1000 dual (16) 10/100/1000Base-T
speed SFP/RJ-45 Combo ports. + (2) 100/1000 SFP/RJ-45 Combo
(includes 19” rack mount brackets)

Power Cord Included

To order the corresponding country
Features Specifications specific power cord, add the extension
from the list below to the end of the
Standards IEEE 802.3 SKU; Ex: SM16TAT2DPA-NA
• Support IPv4/IPv6 dual protocol stack
IEEE 802.3u
IEEE 802.3z -NA = Country Code
• Support Jumbo Frame up to 9K bytes -NA = North America
IEEE 802.3ae
IEEE 802.3x -LA = Latin America
• Authentication – RADIUS, TACACS+ -EU = Europe
IEEE 802.3ad
-UK = United Kingdom
• Security - Support SSH v1/SSH v2/SSL IEEE 802.1D -SA = South Africa
IEEE 802.1w -JP = Japan
• Port based or tagged (802.1Q) VLAN, IEEE 802.1s -OZ = Australia
IEEE 802.1Q -BR = Brazil
MAC based , Management VLAN and
IEEE 802.1p
Private VLAN Edge IEEE 802.1ad
IEEE 802.1AB
• DHCP Relay, DHCP Server IEEE 802.3af
IEEE 802.3at
Software Features
• L2/L3/L4 ACLs Support MAC ACL, IP
standard/extended ACL Connectors (1) RJ Console Port • Management: Web Management, SNMP
(16) 10/100/1000 RJ-45 V1/V2c/V3, Telnet, CLI
• LLDP (Link Layer Discovery Protocol) (2) 100/1000 SFP/RJ-45 Combo
Protocols CSMA/CD • Port Trunk: Supports IEEE 802.3ad
• IEEE 802.3az Energy Efficiency port trunk with link aggregation control
Technology Store-and-Forward switching architecture
protocol (LACP) and static trunk.
• IP Source Guard, Port Security MAC Address 8K MAC address table
• IGMP: Support IGMP Snooping V1/
• Single IP management Backplane 36 Gbps
V2/V3, GVRP, IGMP Proxy, and IGMP
Dimensions Width: 17.4” [442 mm] Querier
Depth: 8.31” [211 mm]
Height: 1.73” [44 mm] • Quality of Service: Supports 8 hardware
PoE Features Power Input 100-240VAC queues. Strict priority and WRR
• Compliant with IEEE 802.3at PoE+ Power-over-Ethernet Max PoE budget 370 Watts • Spanning Tree: Supports IEEE 802.1s
30 Watts for (12) ports simultaneously
30 Watts for (8) ports and 15.4 Watts for MSTP, IEEE 802.1w RSTP and IEEE
• Compliant with IEEE 802.3af PoE 802.1d STP Compliant
(8) ports simultaneously
• 802.1AB LLDP-MED Configuration Environment Operating: 0°C to +40°C • VLAN: Port Based VLAN, IEEE 802.1Q
Humidity: 10% to 90% (non-condensing)
• PoE configuration tag-based, up to 4k VLAN entries, QinQ,
Compliance FCC Class A, CE MAC based VLAN, Private VLAN, Voice
• PoE Scheduling Safety: LVD VLANs and Management VLAN
Warranty Lifetime
• Auto Power Reset (APR) • Firmware Update, configure backup/
restore through TFTP and HTTP
• DHCP per Port
• Device management System:
Graphic Monitoring, Grouping, Traffic
Monitoring, Zero Tough Upgrade, Batch
Upgrade
• Static Routing

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 18

SM24TAT2DPA
Managed PoE+ Switch
(24) 10/100/1000Base-T Ports + (2) 100/1000 SFP/RJ-45 Combo Ports

This switch is a high performance Layer 2 managed

switch with 52Gbps switching capacity. It provides (24) Ordering Information
10/100/1000Base-T copper ports with IEEE 802.3at PoE+ SM24TAT2DPA
capability and (2) additional 100/1000 dual speed SFP/RJ-45 (24) 10/100/1000Base-T
Combo ports. + (2) 100/1000 SFP/RJ-45 Combo
(includes 19” rack mount brackets)

Power Cord Included

To order the corresponding country
Features Specifications specific power cord, add the extension
from the list below to the end of the
Standards IEEE 802.3 SKU; Ex: SM24TAT2DPA-NA
• Support IPv4/IPv6 dual protocol stack
IEEE 802.3u
IEEE 802.3z -NA = Country Code
• Support Jumbo Frame up to 9K bytes -NA = North America
IEEE 802.3ae
IEEE 802.3x -LA = Latin America
• Authentication – RADIUS, TACACS+ -EU = Europe
IEEE 802.3ad
-UK = United Kingdom
• Security - Support SSH v1/SSH v2/SSL IEEE 802.1D -SA = South Africa
IEEE 802.1w -JP = Japan
• Port based or tagged (802.1Q) VLAN, IEEE 802.1s -OZ = Australia
IEEE 802.1Q -BR = Brazil
MAC based , Management VLAN and
IEEE 802.1p
Private VLAN Edge IEEE 802.1ad
IEEE 802.1AB
• DHCP Relay, DHCP Server IEEE 802.3af
IEEE 802.3at
Software Features
• L2/L3/L4 ACLs Support MAC ACL, IP
standard/extended ACL Connectors (1) RJ Console Port • Management: Web Management, SNMP
(24) 10/100/1000 RJ-45 V1/V2c/V3, Telnet, CLI
• LLDP (Link Layer Discovery Protocol) (2) 100/1000 SFP/RJ-45 Combo
Protocols CSMA/CD • Port Trunk: Supports IEEE 802.3ad
• IEEE 802.3az Energy Efficiency port trunk with link aggregation control
Technology Store-and-Forward switching architecture
protocol (LACP) and static trunk.
• IP Source Guard, Port Security MAC Address 8K MAC address table
• IGMP: Support IGMP Snooping V1/
• Rate Limiting: Ingress Policer, Egress Backplane 52 Gbps
V2/V3, GVRP, IGMP Proxy, and IGMP
shaping and rate control, per port Dimensions Width: 17.4” [442 mm] Querier
Depth: 8.31” [211 mm]
Height: 1.73” [44 mm] • Quality of Service: Supports 8 hardware
PoE Features Power Input 100-240VAC queues. Strict priority and WRR
• Compliant with IEEE 802.3at PoE+ Power-over-Ethernet Max PoE budget 370 Watts • Spanning Tree: Supports IEEE 802.1s
30 Watts for (12) ports simultaneously
15.4 Watts for (24) ports simultaneously MSTP, IEEE 802.1w RSTP and IEEE
• Compliant with IEEE 802.3af PoE
802.1d STP Compliant
Surge Protection 6KV
• 802.1AB LLDP-MED Configuration
Environment Operating: 0°C to +45°C • VLAN: Port Based VLAN, IEEE 802.1Q
• PoE configuration Humidity: 10% to 90% (non-condensing) tag-based, up to 4k VLAN entries, QinQ,
Weight 5.9 lbs. [3.3 kg] MAC based VLAN, Private VLAN, Voice
• PoE Scheduling VLANs and Management VLAN
Compliance FCC Class A, CE
• Auto Power Reset (APR) Safety: IEC60950 • Firmware Update, configure backup/
• DHCP per Port Warranty 5 Years restore through TFTP and HTTP
• Device management System: Graphic
Monitoring, Grouping, Traffic Monitoring
• Static Routing

www.transition.com Transition Networks • Power-over-Ethernet Catalog

SM24TAT4XA
Managed Gigabit PoE+ Switch
(24) 10/100/1000Base-T Ports + (4) 1000/10GBase SFP+ Ports

This SM24TAT4XA is a high performance managed Ordering Information

switch with 128 Gbps switching capacity. It
SM24TAT4XA
provides (24) 10/100/1000 copper ports with IEEE (24) 10/100/1000Base-T
802.3at PoE+ capability, and it has additional (4) + (4) 1000/10GBase SFP slots
1000/10GBase dual speed SFP+ slots to support up to (incudes 19” Rack Mount ears)
­
(4) 10G uplinks. Optional Accessories (sold separately)
SFP Modules

Mounting Brackets
BRSM24-01
Wall Mount Bracket

Features Specifications Power Cord Included

Standards IEEE 802.3 To order the corresponding country
• Supports Jumbo Frame up to 9K bytes specific power cord, add the extension
IEEE 802.3u
IEEE 802.3z from the list below to the end of the
• Authentication – RADIUS 802.1x, SKU; Ex: SM24TAT4XA-NA
IEEE 802.3ae
TACACS+ IEEE 802.3x -NA = Country Code
IEEE 802.3ad -NA = North America
• Security - Supports SSH V1/ V2/SSL IEEE 802.1D -LA = Latin America
IEEE 802.1w -EU = Europe
• Rate limiting: Ingress policer, egress -UK = United Kingdom
IEEE 802.1s
shaping and rate control; per VLAN, per IEEE 802.1Q -SA = South Africa
port and flow based IEEE 802.1v -JP = Japan
IEEE 802.1p -OZ = Australia
• DHCP Relay including option 82 IEEE 802.1ad -BR = Brazil
IEEE 802.1AB
• ACL: based on source and destination IEEE 802.3af
MAC / VLAN ID/ IP address / Protocol / IEEE 802.3at
port / DSCP / IP Precedence / TCP/UPD Connectors (1) DB-9 Console Port
Features (Continued)
source and destination ports / 802.1p (24) 10/100/1000 RJ-45 • Web Management, SNMP V1/V2c/V3,
/ Ethernet type / ICMP packets / IGMP (4) 1G/10G SFP+ slots
Telnet, CLI
packets / TCP flag Protocols CSMA/CD
• Supports IEEE 802.3ad port trunk with
• LLDP (Link Layer Discovery Protocol) Technology Store-and-forward switching architecture
link aggregation control protocol (LACP).
MAC Address 32K MAC address table Supports up to 14 groups with (8) ports
• IEEE 802.3az Energy Efficiency
Memory Buffer 4Mbits per group.
• IP Source Guard, Port Security Backplane 128 Gbps
• Supports IGMP Snooping V1/V2/V3,
Dimensions Width: 17.4” [442 mm] GVRP, IGMP Proxy, IGMP Querier and
Depth: 15.15” [385 mm]
MLD snooping V1/V2
Height: 1.73” [44 mm]
PoE Features Power Consumption 50 Watts (max without PoE) • Supports 8 hardware queues, Strict
• Compliant with IEEE 802.3at PoE+ Power Input Internal Power: 100 - 240VAC priority and WRR. Queue assignment
based on DSCP and 802.1p CoS; IPv4/
• Compliant with IEEE 802.3af PoE Power-over-Ethernet Max PoE budget 370 Watts
IPv6 precedence/ Type of Service /
30 Watts for (12) ports simultaneously
15.4 Watts for (24) ports simultaneously DiffServ / classification and remarking
• 802.1AB LLDP-MED Configuration
ACLs, trusted QoS
Environment Operating: 0°C to 40°C
• Power delay and PoE Scheduling Humidity: 10% to 90% (non-condensing) • IEEE 802.1s MSTP, IEEE 802.1w RSTP
• Auto Power Reset (APR) Weight 9.6 lbs. [4.35 kg] and IEEE 802.1d STP Compliant
Compliance Safety: LVD
• Port Based VLAN, IEEE 802.1Q tag-
Emissions: FCC Class A, CE Mark
based, up to 4k VLAN entries, QinQ,
Warranty Lifetime MAC-based VLAN, Private VLAN Edge,
Management VLAN, Voice VLANs
• Firmware Update, configure backup/
restore through HTTP/TFTP/Console
• Supports IPv4/IPv6 dual protocol stack
• Hardware stacking capability with 10G
SFP+ cable

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 20

SISTP101x-141-LRT
Unmanaged Hardened Fast Ethernet PoE Switch
(4) 10/100Base-TX PoE Ports + (1) 100Base-FX Port

Ordering Information
The SISTP101x-141-LRT switch family contains simple “Plug-and-Play” SISTP1011-141-LRT
multi-port switches used at the edge of a hardened network to provide 4) 10/100Base-TX (RJ-45) [100 m/328 ft.]
to 100Base-FX 1310nm multimode (ST)
connections for PoE devices. Depending on the model, these switches can [2 km/1.2 mi.] Link Budget: 11.0 dB
provide multimode or single mode fiber connections with SC or ST connectors SISTP1013-141-LRT
for extended distance communications up to 30 kilometers. These switches (4) 10/100Base-TX (RJ-45) [100 m/328 ft.]
provide 15.4 Watts per port on all ports simultaneously, have redundant input to 100Base-FX 1310nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
power connections, and a fault alarm relay to ensure safe reliable operation in
temperatures between -40°C and +75°C. SISTP1014-141-LRT
(4) 10/100Base-TX (RJ-45) [100 m/328 ft.]
Transition Networks’ hardened switches are certified to operate reliably in to 100Base-FX 1310nm single mode (SC)
[30 km/12.4 mi.] Link Budget: 17.0 dB
harsh environments such as those found on factory floors, outdoor enclosures
or other challenging environments. Optional Accessories (sold separately)

External AC/DC Power Supply

25080
Input: 88-132 VAC, 176-264VDC, 248-370VAC
by switch
Output: 48 ~ 53 VDC, 2.5A, 120 Watts

Features Specifications
Standards IEEE 802.3
• Auto-Negotiation IEEE 802.3af
IEEE 802.3u
• Auto-MDI/MDIX IEEE 802.3x
• Full Wire Speed Performance with 1 Status LEDs PWR 1 (Power): ON = primary power connected
Gbps Backplane PWR 2 (Power): ON = backup power connected
FAULT: ON = power input failure on PWR1 or PWR2
• (4) port integrated PoE injector with full PWR FWD (ports 1-4): ON = PoE power output
15.4 Watts per port on data pairs LNK/ACT (ports 1-5): ON = Link;
FLASHING = data transmitting
• IEEE 802.3af Power-over-Ethernet FDX/COL (ports 1-4): ON = Full-duplex mode;
FLASHING = collisions occurring
Compliant
Dimensions Width: 1.2” [30 mm]
• Extended operating temperature Depth: 3.7” [95 mm]
(-40°C to 75°C) Height: 5.5” [140 mm]
Power Consumption 4.6 Watts (without PoE);
• Dry Contact Relay Alarm Output 66 Watts (Full load with PoE)
• Dual, Redundant 48 VDC Power Inputs Power Input 48 VDC; redundant inputs (removable terminal
block), additional barrel connector
• Reverse Polarity Power Input Protection Ingress Protection IP30
• Overload Current Protection Environment Operating: -40°C to 75°C
Storage: -40°C to 85°C
• DIN Rail Mounting and Wall Mount Humidity: 5% to 95% (non-condensing)
Brackets Included Altitude: 0 – 10,000 ft.
Weight 1.4 lbs. [0.64 kg]
• Store-and-Forward Architecture
Compliance Safety: UL, cUL, CE/EN60950-1
Emissions: CISPR22/EN55022, EN60950 Class A,
FCC ClassA, CE Mark,CE
Immunity: EN61000-4-2, CE EN61000-4-3, CE EN-
61000-4-4, CE EN61000-4-5, CE EN61000-4-6,
CE EN61000-4-8, CE EN61000-4-11, CE EN61000-
6-2, CE EN610006-4,
Environmental: IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 21

SISTP1040-242-LRT
Unmanaged Hardened Gigabit Ethernet PoE+ Switch
(4) 10/100/1000Base-T PoE+ Ports + (2) 1000Base-X SFP Ports

The SISTP1040-242-LRT switch is a simple “Plug-and-Play” multi- Ordering Information

port switch used at the edge of a hardened network to provide SISTP1040-242-LRT
connections for PoE devices in hazardous locations. The (2) gigabit (4) 10/100/1000Base-T (RJ-45) PSE
[100 m/328 ft.] (2) 1000Base-X SFP
speed SFP ports provide the ultimate flexibility in fiber connections [110km/68.4mi]
and communication distances. The two uplink ports can also be
used in a redundant ring for maximum network reliability. This Optional Accessories (sold separately)
switch is Class 1, Div 2 Certified, provides 30 Watts per port on all
SFP Modules
ports simultaneously, has redundant input power connections, and
a fault alarm relay to ensure safe reliable operation in temperatures External AC/DC Power Supply
between -40°C and +75°C. 25105
Input: 110 VAC, 220VDC, 248-370VAC by switch
Transition Networks’ hardened switches are certified to operate Output: 48 ~ 55 VDC, 2.5A, 120 Watts
reliably in harsh environments such as those found on factory floors,
25080
outdoor enclosures or other hazardous environments. Input: 88-132 VAC, 176-264VAC, 248-370VDC
by switch
Output: 48 ~ 53 VDC, 2.5A, 120 Watts

Features Specifications
Standards IEEE 802.3x
• Provides (4) 10/100/1000Base-T(X)
IEEE 802.3u
PoE (PSE) ports based on IEEE IEEE 802.3ab
802.3at Standard IEEE 802.3z
IEEE 802.3at
• (2) 1000Base-X SFP slots for daisy- IEEE 802.3af
chain­­­ PoE Pin Assignments Provides 30 Watts per PoE+ port, Alternative A
Positive (VCC+): RJ-45 pin 1, 2.
• Supports dual 48 VDC power inputs for
Negative (VCC-): RJ-45 pin 3, 6.
power redundancy
Status LEDs Power 1 (Green), Power 2 (Green), P-Fail (Red)
• Polarity reverse protection Ethernet: Link/Activity (Green), Speed (Green), PoE
(Green) SFP: Link/Activity (Green)
• Auto-MDI/MDIX Dimensions Width: 2.35” [59.6 mm]
Depth: 4.14” [105 mm]
• Auto-Negotiation Height: 6” [152 mm]
• Extended operating temperature Power Consumption 5.5 Watts (without PoE)
(-40°C to 75°C) 125.5 Watts (full PoE)
Power Input DC V48(44V~57V), Redundant power,current over
• Dry Contact Relay Alarm Output load protection, polarity reverse protect
• DIN Rail Mounting and Wall Mount Fault Output Relay output contacts, 1A @ 24 VDC load capacity
Brackets Included Ingress Protection IP30
Environment Operating: -40°C to 75°C
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing)
Weight 2.65 lbs. [1.2 kg]
Compliance Safety: UL/cUL 508, Class I / Div 2 Groups A,
B, C, D
Emissions: CISPR (EN55022); FCC Part 15 Class A;
CE Mark;
Immunity: EN61000-4-2(ESD); EN61000-4-3(RS);
EN-61000-4-4(EFT);EN61000-4-5(Surge);
EN61000-4-6(CS); CE EN61000-4-8;
Environmental: IEC60068-2-32 (Free fall);
IEC60068-2-27 (Shock);
IEC60068-2-6 (Vibration)
Warranty Lifetime

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 22

SISPM1040-382-LRT
Managed Hardened Fast Ethernet Switch
(8) 10/100Base-TX PoE+ Ports + (2) 10/100/1000Base-T Ports
or (2) 100/1000Base-X SFP Combo Ports
Ordering Information
The SISPM1040-382-LRT is a managed PoE switch suitable for SISPM1040-382-LRT
connecting and powering devices in challenging environments. The two (8) 10/100Base-TX PoE+ [100 m/328 ft.]
with (2) Gigabit Combo SFP ports
gigabit speed combo ports provide the ultimate flexibility by allowing
copper or fiber SFP uplink ports. The two uplink ports can also be used
Optional Accessories (sold separately)
in a redundant ring for maximum network reliability. The switch has a
PoE power budget of 240 Watts, provides up to 30 Watts per port on SFP Modules
all ports simultaneously, has redundant input power connections, and External AC/DC Power Supply
a fault alarm relay to ensure safe reliable operation in temperatures
25104
between -40°C and +75°C. Input: 85-264 VAC, 124-370 VDC
Transition Networks’ hardened switches are certified to operate reliably Output: 48~55 VDC, 5.0A, 240 Watts
in harsh environments such as those found on factory floors, outdoor
enclosures or other challenging environments.

Features Specifications Features (Continued)

Standards IEEE 802.3
• Store-and-Forward Architecture with 5.6 • STP/RSTP/MSTP (IEEE 802.1D/w/s)
IEEE 802.3u
Gbps Switching Bandwidth IEEE 802.3z • TOS/DSCP
IEEE 802.3ab
• Dual, Redundant 50 to 57 VDC Power IEEE 802.3x
Inputs with Current Overload Protection • QoS Quality of Service (802.1p)
IEEE 802.3ad
IEEE 802.1D • VLAN with VLAN Tagging and GVRP
• 6 PIN Terminal Block input power IEEE 802.1p
connections IEEE 802.1Q
(802-1Q)
IEEE 802.1w
• Fault Output Relay rated 1A@24VDC • MVR (Multicast VLAN Registration)
IEEE 802.1s
IEEE 802.1x support
• (8) ports of PSE, providing up to 30 IEEE 802.1AB
Watts per port IEEE 802.3at • IGMP v2/v3 (IGMP Snooping)

• DIN Rail and Wall Mount Brackets Status LEDs Power, Ring, Ring Master, Fault, Port Link/Act, • IP-based bandwidth management
Port PoE
Included • Port configuration, status, statistics,
Dimensions Width: 2.93” [74.3 mm]
• Extended operating temperature Depth: 4.3” [109.2 mm] monitoring, security
(-40°C to 75°C) Height: 6.06” [153.6 mm]
• SNTP for synchronizing of clocks over
Power Consumption 7.68 Watts (without PoE) network
• Redundant Ring with recovery time less 250 Watts (full PoE)
than 10ms over 250 units Power Input 50~57 VDC; redundant inputs, 6-PIN Terminal • PTP Client (Precision Time Protocol)
Block clock synchronization
Ingress Protection IP30
• System Alarms via SYSLOG / SNMP /
Environment Operating: -40°C to 75°C Trap / Fault Output Relay
Storage: -40°C to 85°C
Humidity: 5% to 95% (non-condensing) • LLDP protocol
Altitude: 0 – 10,000 ft.
Weight 2.6 lbs. [1.2 kg]
• DHCP Client/Server
Compliance Safety: EN60950-1 • Port based network access control
FCC Part 15, CISPR22/EN55022 Class A, (802.1x)
EN61000-4-2, EN61000-4-3, EN-61000-4-4,
EN61000- 4-5, EN61000-4-6, EN61000-4-8, • SSH Security
EN61000-4-11, IEC60068-2-32 (Free fall),
IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) • RADIUS centralized password
Warranty Lifetime management
• SNMPv3 encrypted authentication and
access security
• Web / SNMP v1, v2c, v3 / Telnet / CLI
SSL/HTTPS device management

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 23

SISPM1040-384-LRT-B
Managed Hardened Gigabit Ethernet Switch
(8) 10/100/1000Base-T PoE+ Ports + (4) 100/1000Base-X SFP Ports

Ordering Information
The SISPM1040-384-LRT-B is a managed Gigabit PoE switch suitable for SISPM1040-384-LRT-B
connecting and powering devices in challenging environments. The dual (8) 10/100/1000Base-T PoE+ [100 m/328 ft.]
speed SFP ports provide the ultimate flexibility by allowing fiber SFP uplink with (4) 100/1000Base-X SFP ports
ports with varying communication distances. The uplink ports can also be Optional Accessories (sold separately)
used in a redundant ring for maximum network reliability. The switch has
SFP Modules
a PoE power budget of 240 Watts, provides up to 30 Watts per port on all
ports simultaneously, has redundant input power connections, and a fault Industrial Power Supplies:
alarm relay to ensure safe reliable operation in temperatures between 25104
-40°C and +70°C. Input: 85-264 VAC, 124-370 VDC
Output: 48~55 VDC, 5.0A, 240 Watts
Transition Networks’ hardened switches are certified to operate reliably
in harsh environments such as those found on factory floors, outdoor
enclosures or other challenging environments.

Features Specifications Features (Continued)

• Store-and-Forward Architecture Standards IEEE 802.3 • RSTP/MSTP (IEEE 802.1/w/s)
IEEE 802.3u
with 24 Gbps Switching IEEE 802.3z
Bandwidth • TOS/DiffServ supported
IEEE 802.3ab
IEEE 802.3x • Quality of Service (802.1p) for real-
• (8) ports of PSE, providing up to 30 IEEE 802.3ad
Watts per port time traffic
IEEE 802.1p
IEEE 802.1Q • VLAN (802.1Q) with VLAN tagging
• Supports Jumbo frames up to 9.6K IEEE 802.1w
Bytes IEEE 802.1s and GVRP supported
IEEE 802.1x
• Industry standard G.8032 Ethernet Ring IEEE 802.1AB
• SMTP Client
Protection Switching (ERPS) IEEE 802.3at
• IP-based bandwidth management
Serial Console DB9 to RJ-45 (Cable Supplied)
• Redundant Ring with recovery time less • Application-based QoS management
than 20ms over 250 units Status LEDs Power, Ring, Ring Master, Fault, Port Link/Act, PoE
Power injected • DOS/DDOS auto prevention
• IGMP v2/v3 for filtering multicast traffic, Dimensions Width: 3.8” [96.4 mm]
128 groups per VLAN, (IGMP Snooping) Depth: 4.15" [105.5 mm] • Port configuration, status, statistics,
Height: 6.06” [154 mm] monitoring, security
• SNMP v1/v2c/v3, RMON and
Power Consumption 20 Watts (without PoE)
802.1Q VLAN Network Management • System Alarms via SYSLOG / SNMP
(256 VLANs) Power Input 50 VDC; redundant inputs Trap / Fault Output Relay
Fault Relay 1A at 24 VDC capacity
• ACL, TACACS+, and 802.1x User • DHCP Client/Server
Ingress Protection IP30
Authentication
Environment Operating: -40°C to +70°C • Port based network access control
• Supports LLDP Protocol Storage: -40°C to 85°C (802.1x)
Humidity: 5% to 95% (non-condensing)
• HTTPS/SSH Network Security Altitude: 0 – 10,000 ft. • Web / SNMP v1,v2c,v3 / Telnet / CLI
device management
• Advanced IP-based Rate Limiting Weight 3.7 lbs. [1.68 kg]
Compliance Safety: EN60950-1, UL 60950-1, CE, • RADIUS centralized password
• Extended operating temperature FCC Part 15, CISPR22/EN55022 Class A, management
(-40°C to 70°C) EN61000-4-2, EN61000-4-3, EN-61000-4-4,
EN61000- 4-5, EN61000-4-6, EN61000-4-8, • SNMPv3 encrypted authentication
• Dual, Redundant 50VDC Power EN61000-4-11, IEC60068-2-32 (Free fall), and access security
Inputs with Overload Current Protection IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Warranty Lifetime­­­
• DIN Rail and Wall Mount Brackets
Included

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 24

SISPM1040-384-LRT-C
Managed Hardened PoE+ Switch
(8) 10/100/1000Base-T PoE+ Ports + (4) 100/1000Base-X SFP Ports
The SISPM1040-384-LRT-C is a full managed PoE+ switch suitable for
connecting and powering devices in hardened environments. The switch Ordering Information
can supply up to 30Watts per port on all eight ports simultaneously. The SISPM1040-384-LRT-C
switch also includes the embedded Device Management System (DMS) (8) 10/100/1000Base-T PoE+ [100 m/328 ft.]
with (4) 100/1000Base-X SFP ports
software that provides the advanced tools necessary for total management
of all IP addressable devices. The unique DMS provides security Optional Accessories (sold separately)
integrators with lower overall cost, less downtime and easier management SFP Modules
of the entire PoE+ network.
Industrial Power Supplies:
Transition Networks’ hardened switches are certified to operate reliably
in harsh environments such as those found on factory floors, outdoor 25104
Input: 85-264 VAC, 124-370 VDC
enclosures or other challenging environments. Output: 48~55 VDC, 5.0A, 240 Watts
25105
Input: 85-264 VAC, 124-370 VDC
Output: 48~55 VDC, 2.5A, 120 Watts

Features Specifications
Standards IEEE 802.3
• Store-and-Forward Architecture
with 24 Gbps Switching
IEEE 802.3u Features (Continued)
IEEE 802.3z
Bandwidth IEEE 802.3ab • ACL - up to 256 entries, Drop or
IEEE 802.3x Rate limiting based on: Source and
• Supports Jumbo frames up to 9.6K IEEE 802.3ad Destinations MAC, VLAN ID and IP
Bytes IEEE 802.1p
IEEE 802.1Q
address, protocol, port, DSCP/ IP
• Ring Protections IEEE 802.1w precedence, TCP/UDP source and
IEEE 802.1s destination ports, 802.1p priority,
-- Industry standard G.8032 Ethernet Ring IEEE 802.1x Ethernet type, ICMP packets and TCP flag
Protection Switching (ERPS) IEEE 802.1AB
-- Support G.8031 Ethernet Linear Protection
IEEE 802.3ad • Loop Protection
IEEE 802.3af
Switching (EPS)
IEEE 802.3at • Quality of Service
-- Rapid Ring with recovery time less than 20ms IEEE 802.3ah
IEEE 802.1ag -- Supports 8 hardware queues
• Radius, TACACS+, User Authentication IEEE 1588 v2
-- Scheduling: strict priority and WRR, Queue
ITU-T Y.1731
assignment based on DSCP and class of
• Supports LLDP Protocol ITU-T G.8031
service
ITU-T G.8032
• HTTPS/SSH v1/v2 Network Security MAC Address 8K -- Classification: Port based, 802.1p VLAN priority
based, IPV4/IPV6 precedence /DSCP based,
• Temperature Detection and Alarm Backplane 24Gbps DiffServ, Classification and re-marking ACLs
Serial Console RJ-45
• Support HW Watchdog to resume -- Rate limiting: Ingress policer, Engress shaping and
operation from CPU hang up Status LEDs System, Power1, Ring Master, Coupling, Power2, rate control, per port
Alarm, Port Status
• IEEE 1588 v2 PTP • IPv4/IPv6 dual stacks and static routing
Dimensions Width: 2.4” [62 mm]
Depth: 5.3" [135 mm] • Port Security, IP Source Guard
• Port Mirroring Height: 5.4” [130 mm]
• Power-over-Ethernet DIP Switch (2-pin) Rapid Ring setting • System Alarms via SYSLOG / SNMP Trap

-- Port Configuration Reset button Reset the switch, Restore Factory default • DHCP Client/Server, DHCP relay, Option
Digital output (relay) 24VDC/1A 82
-- Auto Power Reset (APR)
Digital input Level 0 (Low): 0V to 6V • Port based network access control
-- DHCP per Port Level 1 (High): 10V to 24V
(802.1x)
-- PoE Scheduling Power Input 48 - 57VDC; redundant inputs
• Web / SNMP v1,v2c,v3 / Telnet / CLI
-- Complies to IEEE 802.3at, IEEE802.3af Ingress Protection IP30
management
Environment Operating: -40°C to +75°C
-- 240Watts PoE budget
Storage: -40°C to 85°C • Device Management System (DMS)
-- 30Watts output on all 8 ports Humidity: 5% to 95% (non-condensing)
Altitude: 0 – 10,000 ft. -- Graphical Monitoring - Topology View, Floor view,
• IEEE 802.3ad LACP, up to 6 groups and Map view
Weight 2.2 lbs. [1 kg]
up to 4 ports per group -- Find my Switch
Compliance EMI: CE, FCC Part 15, EN61000-4-2, EN61000-4-3,
• Up to 4K VLAN groups, Port based, EN-61000-4-4, EN61000- 4-5, EN61000-4-6, -- Traffic Monitoring
EN61000-4-8, IEC60068-2-32 (Free fall),
802.1Q tag, Q-in-Q, MAC based VLAN, IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration) -- Trouble shooting - Network diagnostic,
Management VLAN, Private VLAN Edge, Safety: IEC60950-1, UL Class 1/Div 2 protection mechanism, performance and Link
Voice VLAN, GVRP Management
Warranty 5 Years

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 25

SISPM1040-362-LRT
Managed Hardened PoE+ Switch
(4) 10/100/1000Base-T PoE+ + (2) 10/100/1000Base-T RJ-45
+ (2) 100/1000Base-X SFP Ports
Ordering Information
The SISPM1040-362-LRT is a full managed PoE+ switch suitable for SISPM1040-362-LRT
connecting and powering devices in hardened environments. The switch (4) 10/100/1000Base-T PoE+
can supply up to 30Watts per port on all four PoE ports simultaneously. with (2) 10/100/1000Base-T RJ-45
+ (2) 100/1000Base-X SFP ports
The switch also includes the embedded Device Management System
(DMS) software that provides the advanced tools necessary for total Optional Accessories (sold separately)
management of all IP addressable devices. The unique DMS provides SFP Modules
security integrators with lower overall cost, less downtime and easier
management of the entire PoE+ network. Industrial Power Supplies:

Transition Networks’ hardened switches are certified to operate reliably 25104

Input: 85-264 VAC, 124-370 VDC
in harsh environments such as those found on factory floors, outdoor Output: 48~55 VDC, 5.0A, 240 Watts
enclosures or other challenging environments. 25105
Input: 85-264 VAC, 124-370 VDC
Output: 48~55 VDC, 2.5A, 120 Watts
Features Specifications
• Store-and-Forward Architecture
with 16 Gbps Switching
Standards IEEE 802.3
IEEE 802.3u Features (Continued)
IEEE 802.3z
Bandwidth IEEE 802.3ab • ACL - up to 256 entries, Drop or
IEEE 802.3x Rate limiting based on: Source and
• Supports Jumbo frames up to 9.6K IEEE 802.3ad Destinations MAC, VLAN ID and IP
Bytes IEEE 802.1p address, protocol, port, DSCP/ IP
IEEE 802.1Q
• Ring Protections IEEE 802.1w
precedence, TCP/UDP source and
IEEE 802.1s destination ports, 802.1p priority,
-- Industry standard G.8032 Ethernet Ring
IEEE 802.1x Ethernet type, ICMP packets and TCP flag
Protection Switching (ERPS)
IEEE 802.1AB
-- Support G.8031 Ethernet Linear Protection IEEE 802.3ad • Loop Protection
Switching (EPS) IEEE 802.3af
IEEE 802.3at • Quality of Service
-- Rapid Ring with recovery time less than 20ms IEEE 802.3ah
-- Supports 8 hardware queues
IEEE 802.1ag
• Radius, TACACS+, User Authentication IEEE 1588 v2 -- Scheduling: strict priority and WRR, Queue
ITU-T Y.1731 assignment based on DSCP and class of
• Supports LLDP Protocol ITU-T G.8031 service
ITU-T G.8032
• HTTPS/SSH v1/v2 Network Security -- Classification: Port based, 802.1p VLAN priority
MAC Address 8K
based, IPV4/IPV6 precedence /DSCP based,
• Temperature Detection and Alarm Backplane 16Gbps DiffServ, Classification and re-marking ACLs
• Support HW Watchdog to resume Serial Console RJ-45 -- Rate limiting: Ingress policer, Engress shaping and
operation from CPU hang up Status LEDs System, Power1, Ring Master, Coupling, Power2,
rate control, per port
Alarm, Port Status
• IEEE 1588 v2 PTP • IPv4/IPv6 dual stacks and static routing
Dimensions Width: 2.4” [62 mm]
• Port Mirroring Depth: 5.3" [135 mm] • Port Security, IP Source Guard
Height: 5.4” [130 mm]
• Power-over-Ethernet • System Alarms via SYSLOG / SNMP Trap
DIP Switch (2-pin) Rapid Ring setting
-- Port Configuration Reset button Reset the switch, Restore Factory default • DHCP Client/Server, DHCP relay, Option
Digital output (relay) 24VDC/1A
82
-- Auto Power Reset (APR)
Digital input Level 0 (Low): 0V to 6V • Port based network access control
-- DHCP per Port
Level 1 (High): 10V to 24V (802.1x)
-- PoE Scheduling Power Input 48 - 57VDC; redundant inputs with reverse polarity
protection and overload current protection • Web / SNMP v1,v2c,v3 / Telnet / CLI
-- Complies to IEEE 802.3at, IEEE802.3af management
Ingress Protection IP30
-- 120Watts PoE budget
Environment Operating: -40°C to +75°C • Device Management System (DMS)
-- 30Watts output on all 4 PoE+ ports Storage: -40°C to 85°C
-- Graphical Monitoring - Topology View, Floor view,
Humidity: 5% to 95% (non-condensing)
• IEEE 802.3ad LACP, up to 6 groups and Altitude: 0 – 10,000 ft.
Map view
up to 4 ports per group Weight 2 lbs. [0.9 kg] -- Find my Switch

• Up to 4K VLAN groups, Port based, Compliance EMI: CE, FCC Part 15, EN61000-4-2, EN61000-4-3, -- Traffic Monitoring
802.1Q tag, Q-in-Q, MAC based VLAN, EN-61000-4-4, EN61000- 4-5, EN61000-4-6,
EN61000-4-8, IEC60068-2-32 (Free fall), -- Trouble shooting - Network diagnostic,
Management VLAN, Private VLAN Edge, protection mechanism, performance and Link
IEC60068-2-27 (Shock), IEC60068-2-6 (Vibration)
Voice VLAN, GVRP Safety: IEC60950-1, UL Class 1/Div 2 Management
Warranty 5 Years

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 26

N-GXE-POE-xx-01
PCIe Gigabit Ethernet Fiber Network Interface Card
with PoE+
1000Base-X and 10/100/1000Base-T PoE+
The N-GXE-POE-xx-01 Network Interface Card (NIC) provides connectivity to
a secure fiber network while also delivering power to a PoE powered device Ordering Information
(PD), such as a VoIP phone with a copper UTP interface. It fully complies with
N-GXE-POE-LC-01
all IEEE 802.3z and 1000Base-X standards, providing up to 2000 Mbps full- 1000Base-SX 850nm multimode LC
duplex bandwidth capacity. [50/125 um fiber: 550 m/1804 ft.]
[62.5/125 um fiber: 220 m/722 ft.]
Developed to support high-end users, this (2) port NIC has (1) 1000Base-X Link Budget: 8.0 dB
fiber network interface port (SFP version is 100/1000Base-X) and (1) switched Plus 10/100/1000Base-T PoE+ port
(includes optional low-profile bracket)
10/100/1000Base-T port supporting IEEE 802.3at PoE+ power. It is designed
to allow a PC to power a VoIP phone, or any other traditional copper powered N-GXE-POE-SFP-01
Gigabit Ethernet PCIe NIC with a
device, over a secure fiber network. Additionally, the NIC also has the ability 100/1000Base-X Open SFP fiber port, plus a
to provide traffic switching functions between the copper and fiber ports, even 10/100/1000Base-T PoE+ port
when the PC is in a sleep mode. (includes optional low-profile bracket)
N-GXE-POE-SC-01(L)
Combining the functions of PC connectivity and VoIP phone connectivity into one device saves installation time, 1000Base-SX 850nm multimode SC
expense, and the space of having two devices at the desktop. When the VoIP traffic is filtered and prioritized by [50/125 um fiber: 550 m/1804 ft.]
third-party devices like an Ethernet switch and the IP phone, this PoE NIC will pass all tagged traffic ensuring users [62.5/125 um fiber: 220 m/722 ft.]
Link budget: 8.0dB
experience a high level of quality of service. VLANs and Prioritization can also be configured at the NIC via Transition Plus 10/100/1000Base-T PoE+
Networks’ PoE NIC utility software. (includes low-profile bracket only)
N-GXE-POE-SC-01(S)
1000Base-SX 850nm multimode SC
Features Specifications [50/125 um fiber: 550 m/1804 ft.]
[62.5/125 um fiber: 220 m/722 ft.]
Standards IEEE 802.3-2000 Link budget: 8.0dB
• High bandwidth 1000Mbps
IEEE 802.3z Plus 10/100/1000Base-T PoE+
• Supports Full-duplex Mode IEEE 802.3x (includes standard bracket only)
IEEE 802.1Q
• Supports IEEE 802.3x Full-Duplex Flow IEEE 802.1p
IEEE 802.3ab
Control IEEE 802.3af Optional Accessories
IEEE 802.3at
• Supports PCIe x1 bus SFP+ Modules
MAC Address 8k MAC address table
• Compliant with PCIe Rev 2.1 Interface 27246
Max Packet Size Jumbo Frames, 10k bytes Cable assembly, 4 pin Molex to ATX Power
• Supports Jumbo Frames Jumper Switches Legacy PoE Cable Adapter
Energy Efficient Ethernet (EEE) enable/disable 28582
• Supports High Level VLAN Filtering 4 pin Molex to SATA 15 pin Female Power
Status LEDs L/A Fiber Link/Activity
Function PoE Power-over-Ethernet Adapter
RJ-45 Upper Lf TP Link/Activity/Speed 28583
• IPv6 Capable RJ-45 Upper Rt TP Duplex 6” SATA Power Y Splitter Cable Adapter-M/F
• Supports IP headers and TCP/UDP Dimensions Width: 4.8” [121.9 mm]
N-PoE-CBLKIT
checksum offload Depth: 6.5” [165.1 mm]
3 piece cable kit for 12V power input
Height: 0.9” [22.86 mm]
connectivity options
• Wake-on-LAN (WoL) power management Power Consumption 1.6 Watts (typical without PoE) (Includes 27246, 28582, 28583)
43.6 Watts (typical with PoE)
• PXE 2.1 Boot ROM Supported N-POE-EPC
Voltage input PCIe 3.3V Ethernet packet controller software utility used
• ACPI 2.0 Link Status LED for each port 12V Peripheral connection for PoE for VLAN configuration within the NIC. Free
Power-over-Ethernet Mode A Power download from transition.com
• Driver Support
- Windows 7 Environment Operating: 0°C to 50°C
- Windows 8, 8.1 Storage: -15°C to 65°C
Humidity: 5% to 95% (non-condensing)
- Windows 10 Altitude: 0 – 10,000 ft.
- Windows Server 2008
Weight 2 lbs. [0.90 kg]
- Windows Server 2012
- Windows Vista Compliance Emission: EN55022 Class B, CE, UL Listed
Immunity: EN55024
• Available with a fixed LC port or SC or an Warranty Lifetime
open SFP port

www.transition.com Transition Networks • Power-over-Ethernet Catalog | 27

 Global Presence
transition.com/contact

All trademarks are the property of their respective owners. Technical information is subject to change without notice.

www.transition.com ©2016 Transition Networks, Inc. Transition Networks • 902015PoE (0617)