www.swagelok.

com

Industrial Pre ssure Transduce rs

Sta nda rd Industr ial (S Mode l)
E x plosion-Proof (E Mode l)
Intr insic ally Safe ( T Mode l)

Fe ature s
■ Accuracy ≤ 0.5 % of span limit point calibration (0.25 % of span best fit straight line)

■ Broad selection of pressure ranges, engineering units in psi, bar, MPa, kg/cm2, and kPa.
Pressure references: gauge (vacuum, positive, compound) and absolute
■ Available with a variety of electrical connections and output signals

■ Available with a variety of process connections including flush diaphragm and

Swagelok® tube adapter
2 Industrial Pressure Transducers

Features
Contents Swagelok industrial
pressure transducers
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 provide electronic
monitoring of
Performance Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
system pressure for
Materials of Construction . . . . . . . . . . . . . . . . . . . . . . . 2 general industrial
applications,
Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 including hazardous
locations.
Model Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . 3 ■ Stainless steel
construction with
Transducer Models
robust, compact
S Model: Standard Industrial . . . . . . . . . . . . . . . . . . 4 design that resists
pressure spikes, shock, and vibration
E Model: Explosion-Proof . . . . . . . . . . . . . . . . . . . . 6 ■ Variety of pressure ranges, process connections, electrical
connections, and output signals for system versatility
T Model: Intrinsically Safe . . . . . . . . . . . . . . . . . . . . 8
■ Thin film and piezoresistive sensor technology for
Pressure Range Designators . . . . . . . . . . . . . . . . . . . . . 10 repeatability, reliability, and stability
■ Temperature-compensated to ensure accuracy and long-
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 term stability when exposed to temperature variations
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 ■ Available in flush diaphragm version for use with viscous
fluids and slurries.
Accessories ■ Wiring protection against reverse polarity and short circuit
on the instrument side
Attachable Indicator Display. . . . . . . . . . . . . . . . . . . 14

Remote Panel Mount Display . . . . . . . . . . . . . . . . . . 15

Performance Data—All Models
Cooling Elements. . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Accuracy ≤ 0.5 % LPC (0.25 % BFSL), including
nonlinearity, hysteresis, zero-point and full-scale
Weld Adapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 error, measured in accordance with IEC 61298-2
Repeatability ≤ 0.1 % of span
Cables and Connectors. . . . . . . . . . . . . . . . . . . . . . . 16
Long-Term ≤ 0.2 % of span per year
Stability
Response Time ≤ 1 ms with internal diaphragm connection;
≤ 10 ms with flush diaphragm connection
Materials of Construction Shock 1000 g (600 g for field case models)
Resistance in accordance with IEC 60068‑2‑27
Component S Model E Model T Model (mechanical shock)
Wetted
Vibration 20 g (10 g for field case models)
Internal diaphragm Resistance in accordance with IEC 60068‑2‑6
(25 bar [362 psi, 2.5 MPa, (vibration under resonance)
316 SS
25.5 kg/cm2, 2500 kPa]
and lower pressure range) Temperature Pressure ranges equal to or less than 0.25 bar
Coefficients (3.6 psi, 0.025 MPa, 0.25 kg/cm2, 25 kPa): ≤ 0.4 % of
Internal diaphragm (TC) in span per 18°F (10°C) change on zero point.
(over 25 bar [362 psi, 2.5 MPa, Compensated
AISI S13800 Elgiloy® AISI S13800 Pressure ranges higher than 0.25 bar (3.6 psi,
25.5 kg/cm2, 2500 kPa] Temperature
pressure range) 0.025 MPa, 0.25 kg/cm2, 25 kPa): ≤ 0.2 % of span
Range per 18°F (10°C) change on zero point.
Process connection,
316 Ti ≤ 0.2 % of span per 18°F (10°C) change on span
flush diaphragm
within compensated temperature range
Flush diaphragm, O-ring Buna N from 32 to 176°F (0 to 80°C)
Nonwetted
Transducer body 316 SS
Flush diaphragm Calibration
internal fluid, Every Swagelok pressure transducer is factory calibrated to
Synthetic oil
piezoresistive sensor
ensure conformance to its stated accuracy.
internal fluid
 Industrial Pressure Transducers 3

Model Selection Guide

S Model E Model T Model
Models Standard Industrial Explosion-Proof Intrinsically Safe
Approvals CE and CSA® FM® and CSA FM and CSA
Diaphragm Type Internal Flush Internal Flush Internal Flush
Slurries,
Slurries, crystallizing, or
In hazardous
Wide variety Slurries, crystallizing, or In hazardous high-viscosity
locations
of general crystallizing, or high-viscosity areas requiring media in
Application requiring
industrial high-viscosity media requiring intrinsically safe hazardous
explosion-proof
applications media explosion-proof system design areas requiring
design
design intrinsically safe
design

Pressure Range See Pressure Range Designators, page 10.

Vacuum psi to... 15 000 psi 8000 psi 15 000 psi 8000 psi 15 000 psi 8000 psi
Vacuum bar to... 1000 bar 600 bar 1000 bar 600 bar 1000 bar 600 bar
Vacuum MPa to... 100 MPa 60 MPa 100 MPa 60 MPa 100 MPa 60 MPa
Vacuum kg/cm2 to... 1000 kg/cm2 600 kg/cm2 1000 kg/cm2 600 kg/cm2 1000 kg/cm2 600 kg/cm2
Vacuum kPa to... 100 000 kPa 60 000 kPa 100 000 kPa 60 000 kPa 100 000 kPa 60 000 kPa
Pressure Reference Gauge (vacuum, positive, compound) and absolute
4 to 20 mA
4 to 20 mA
Output Signal 0 to 5 V 4 to 20 mA
1 to 5 V
0 to 10 V
Options See Options, page 14.
Special cleaning
ASME B40.1 Level IV ✓ ✓ ✓
Accuracy ≤ 0.25 % LPC of
span (0.125 % BFSL) (for
pressure ranges ≥ 0.25 bar ✓ ✓ — — ✓ ✓
[3.6 psi, 0.025 MPa,
0.25 kg/cm2, 25 kPa])
11-Point Certificate of
Calibration traceable to ✓ ✓ ✓ ✓ ✓ ✓
DKD, EN 10204 3.1
General Material
Certificate of Compliance, ✓ ✓ ✓ ✓ ✓ ✓
EN 10204 2.2
Material Test Certificate,
EN 10204 3.1, heat code ✓ ✓ ✓ ✓ ✓ ✓
traceable
Certificate of Accuracy,
EN 10204 2.2 ✓ ✓ ✓ ✓ ✓ ✓
EPDM or fluorocarbon
— ✓ — ✓ — ✓
FKM/FPM O-rings
Integral cooling element
— ✓ — — — ✓
(–4 to 302°F [–20 to 150°C])
Mounted cooling element
(–40 to 302°F [–40 to
✓ — — — ✓ —
150°C] or –40 to 392°F
[–40 to 200°C])
Alloy C-22 flush
diaphragm (for pressure
ranges ≥ 0.25 bar [3.6 psi, — ✓ — ✓ — ✓
0.025 MPa, 0.25 kg/cm2,
25 kPa])
Cable lengths
9 ft (2.7 m), 16 ft (4.9 m), ✓ ✓ — — ✓ ✓
32 ft (9.8 m)
Cable lengths
10 ft (3.0 m), 20 ft (6.1 m), — — ✓ ✓ — —
30 ft (9.1 m)
Display See Accessories, page 14.
4 Industrial Pressure Transducers

S Model: Standard Industrial

The Swagelok S model is engineered for use in a wide variety
of general industrial applications such as machine control,
process control, laboratory and testing equipment, and
hydraulics and pneumatics.
■ Adjustable zero and span

Output Signals Temperature Ratings Electrical Data

■ 4 to 20 mA Without Integral Cooling Element ■ Power supply:
■ 0 to 5 V (dc) ■ 10 to 30 V (dc) for 4 to 20 mA and
■ Media:
0 to 5 V (dc) output signals
■ 0 to 10 V (dc) –22 to 212°F (–30 to 100°C)
■ 14 to 30 V (dc) for 0 to 10 V output
■ Ambient:
Electrical Connectors –4 to 176°F (–20 to 80°C)
signal
■ 4-pin circular (IP67/NEMA 4) ■ Storage: Approvals/Compliance
■ Bendix MIL plugs (IP67/NEMA 4) –40 to 212°F (–40 to 100°C) ■ CE conformity:
■ Direct-wire zero and span adjustable ■ Compensated range: ■ EMC Directive—2004/108/EC
(IP67/NEMA 4) or nonadjustable 32 to 176°F (0 to 80°C) tested in accordance with
(IP68/NEMA 6) EN 61 326-1:2006 and
■ L-plugs (IP65/NEMA 5) With Integral Cooling Element EN 61 326‑ 2-3:2006
(Flush Diaphragm Process
■ Pressure Equipment
Process End Connections Connection Only)
Directive—97/23/EC
■ Media:
Internal Diaphragm Type –4 to 302°F (–20 to 150°C)
■ CSA (Canada and U.S.A.) approval:
■ Swagelok tube adapter Class 2252-01
■ Ambient:
■ Tapered threads: male NPT and –4 to 176°F (–20 to 80°C)
PT (ISO 7/1)
■ Storage:
■ Straight threads: EN (RG) and PF (RJ) –4 to 212°F (–20 to 100°C))
Flush Diaphragm Type
■ EN flush diaphragm
 Industrial Pressure Transducers 5

S Model: Standard Industrial

Ordering Information
Build an S Model transducer ordering number by adding the designators as shown below.

A B C D E
PTI - S - NG160 - 1 5 AO - E

A Pressure Range D Process End Connection E Options (See pages 3 and 14.)
See pages 10 and 11. Internal Diaphragm Type For multiple options, add designators in
AO = 1/4 in. male NPT alphabetical order.
B Output Signal AP = 1/2 in. male NPT➀ A = Special cleaning, ASME B40.1
1 = 4 to 20 mA AQ = 1/4 in. Swagelok tube adapter Level IV➀
2 = 0 to 5 V (dc) BG = 3/8 in. Swagelok tube adapter B = Accuracy ≤ 0.25 % LPC of span
3 = 0 to 10 V (dc) AR = 1/2 in. Swagelok tube adapter (0.125 % BFSL) (for pressure
AS = 6 mm Swagelok tube adapter ranges ≥ 0.25 bar [(3.6 psi,
BH = 10 mm Swagelok tube adapter 0.025 MPa, 0.25 kg/cm2, 25 kPa])
C Electrical Connector
AT = 12 mm Swagelok tube adapter C =11-Point Certificate of Calibration
1 =4-pin circular connector, M12 3 1 traceable to DKD, EN 10204 3.1
(IP67/NEMA 4) AV = G1/4B EN (1/4 RG)➁
D =General Material Certificate of
2 =Direct-wire 4 ft (1.5 m) flying lead AW = G1/2B EN (1/2 RG)➀➁
Compliance, EN 10204 2.2
(IP67/NEMA 4) AX = G1/4B PF (1/4 RJ)➂
E = Material Test Certificate,
3 =Bendix 4-pin MIL plug (IP67/ AZ = G1/2B PF (1/2 RJ)➂
EN 10204 3.1, heat code traceable
NEMA 4) BD = R1/4 PT (1/4 ISO 7 taper)
F = Certificate of Accuracy,
5 =L-plug, PG9 cable gland, BE = R1/2 PT (1/2 ISO 7 taper) EN 10204 2.2
DIN EN175301-803 (IP65/NEMA 5) Flush Diaphragm Type R =Mounted cooling element, –40 to
6 =L-plug, 1/2 in. NPT female BV = G1/2B EN flush diaphragm 302°F (–40 to 150°C) (3 fins)➁
conduit, DIN EN175301-803 (IP65/ BJ = G1B EN flush diaphragm S =Mounted cooling element, –40 to
NEMA 5) 392°F (–40 to 200°C) (5 fins)➁
➀ Refers to cooling element process connection
7 =Direct-wire 4 ft (1.5 m) flying lead when ordering mounted cooling element T = 9 ft (2.7 m) cable➂
(IP68/NEMA 6) zero and span (designator R or S).
Y = 16 ft (4.9 m) cable➂
nonadjustable ➁ Can be used with Swagelok RG adapter
fittings. Z = 32 ft (9.8 m) cable➂
8 =Bendix 6-pin MIL plug (IP67/ ➂ Can be used with Swagelok RJ adapter
NEMA 4) fittings. Flush Diaphragm Type Only
U =Integral cooling element (2 fins)
(requires process end connection
BV or BJ and EPDM or fluorocarbon
FKM/FPM O-ring [option W or X])
V =Alloy C-22 flush diaphragm (for
pressure ranges ≥ 0.25 bar [3.6 psi,
0.025 MPa, 0.25 kg/cm2, 25 kPa];
requires process end connection
BV or BJ)
W = EPDM O-ring
X = Fluorocarbon FKM/FPM O-ring
➀ Available only with positive pressure ranges
≥ 0.40 bar (5.8 psi, 0.04 MPa, 0.41 kg/cm2,
40 kPa); not available with process end
connections BV or BJ; not available with
options R, S, U, W, or X. When ordered with a
piezoresistive sensor range, a halocarbon fluid
is included; for oxygen applications, maximum
media temperature is 140°F (60°C).
➁ Available only with process end connections
AP and AW; transducer-to-cooling element
connection is G1/2B EN (1/2 RG). Cooling
element is not field removable.
➂ Available only with direct-wire electrical
connectors; select electrical connector 2 or 7.
6 Industrial Pressure Transducers

E Model: Explosion-Proof
The Swagelok E Model is specifically designed to meet
durability and performance demands of industrial applications
where explosion-proof ratings are required, such as wellhead
monitoring, refining, petrochemical, offshore oil and gas, and
gas measurement.

Features
■ Resistant to pressure spikes, vibration, and moisture intrusion
to IP67/NEMA 4X

Output Signals Temperature Ratings Electrical Data

■ 4 to 20 mA ■ Media: ■ Power supply:
■ 1 to 5 V (dc) –22 to 212°F (–30 to 100°C) ■ 10 to 30 V (dc) for 4 to 20 mA
■ Ambient: output signal
Electrical Connectors –22 to 212°F (–30 to 100°C) ■ 6 to 30 V (dc) for 1 to 5 V (dc)
■ 1/2 in. male NPT conduit with ■ Storage: output signal
6 ft (1.8 m) shielded cable (IP67/ –40 to 221°F (–40 to 105°C)
NEMA 4X) ■ Compensated range: Approvals/Compliance
32 to 176°F (0 to 80°C) ■ CSA (Canada and U.S.A.) and FM:
Process End Connections
■ Class I, Division 1, Groups A, B, C,
Internal Diaphragm Type D
■ Swagelok tube adapter ■ Class II/III, Division 1, Groups E, F,
■ Tapered threads: male NPT and G
PT (ISO 7/1) ■ Temperature class:
■ Straight threads: EN (RG)) ■ T6 at maximum ambient 140°F
(60°C)
Flush Diaphragm Type
■ T4 at maximum ambient 221°F
■ EN flush diaphragm
(105°C)
 Industrial Pressure Transducers 7

E Model: Explosion-Proof
Ordering Information
Build an E Model transducer ordering number by adding the designators as shown below.

A B C D E
PTI - E - NG160 - 1 9 AQ - AE

A Pressure Range D Process End Connection E Options (See pages 3 and 14.)
See pages 10 and 11. Internal Diaphragm Type For multiple options, add designators in
AO = 1/4 in. male NPT alphabetical order.
B Output Signal AP = 1/2 in. male NPT A = Special cleaning, ASME B40.1
1 = 4 to 20 mA AQ = 1/4 in. Swagelok tube adapter Level IV➀
4 = 1 to 5 V (dc) BG = 3/8 in. Swagelok tube adapter C =11-Point Certificate of Calibration
AR = 1/2 in. Swagelok tube adapter traceable to DKD, EN 10204 3.1
C Electrical Connector AS = 6 mm Swagelok tube adapter D =General Material Certificate of
BH = 10 mm Swagelok tube adapter Compliance, EN 10204 2.2
9 = 1/2 in. male NPT conduit with
AT = 12 mm Swagelok tube adapter E = Material Test Certificate,
6 ft (1.8 m) shielded cable (IP67/
AV = G1/4B EN (1/4 RG)➀ EN 10204 3.1, heat code traceable
NEMA 4X)
AW = G1/2B EN (1/2 RG)➀ F = Certificate of Accuracy,
EN 10204 2.2
BD = R1/4 PT (1/4 ISO 7 taper)
T = 10 ft (3.0 m) cable
BE = R1/2 PT (1/2 ISO 7 taper)
Y = 20 ft (6.1 m) cable
Flush Diaphragm Type Z = 30 ft (9.1 m) cable
BV = G1/2B EN flush diaphragm
Flush Diaphragm Type Only
BJ = G1B EN flush diaphragm
V =Alloy C-22 flush diaphragm (for
➀ Can be used with Swagelok RG adapter
fittings. pressure ranges ≥ 0.25 bar [3.6 psi,
0.025 MPa, 0.25 kg/cm2, 25 kPa];
requires process end connection
BV or BJ)
W = EPDM O-ring
X = Fluorocarbon FKM/FPM O-ring
➀ Available only with positive pressure ranges
≥ 0.25 bar (3.6 psi, 0.025 MPa, 0.25 kg/cm2,
25 kPa); not available with process end
connections BV or BJ; not available with
options W or X. When ordered with a
piezoresistive sensor range, a halocarbon fluid
is included; for oxygen applications, maximum
media temperature is 140°F (60°C).
8 Industrial Pressure Transducers

T Model: Intrinsically Safe

The Swagelok T Model is engineered for use in industrial
pressure measurement applications where intrinsically
safe ratings are required, such as hazardous environments
or media, including gases, vapors and dust. Products are
approved as intrinsically safe, FM and CSA, when used with
an intrinsically safe associated apparatus.
■ Adjustable zero and span
■ Available in a field-case version for use in corrosive or
washdown environments

Output Signal Temperature Ratings Approvals/Compliance

■ 4 to 20 mA Without Integral Cooling Element ■ CSA (Canada and U.S.A.) and FM
intrinsically safe:
■ Media:
Electrical Connectors ■ Class, I Division 1, Groups A, B, C,
–4 to 221°F (–20 to 105°C)
■ 4-pin circular (IP67/NEMA 4) and D
■ Ambient: ■ Class II, Division 1, Groups E, F,
■ Bendix MIL plugs (IP67/NEMA 4) –4 to 221°F (–20 to 105°C) and G
■ Direct-wire zero and span adjustable ■ Storage: ■ Class III Division 1
(IP67/NEMA 4) or nonadjustable –4 to 221°F (–20 to 105°C) ■ Class I, Zone 0, Group IIC AExia
(IP68/NEMA 6) ■ Compensated range: IP65
■ L-plugs (IP65/NEMA 5) 32 to 176°F (0 to 80°C) ■ Entity parameters:
■ Field case, M20  1.5 gland or Vmax = 30 V (dc)
female NPT conduit (IP67/NEMA 4X) Electrical Data Imax = 100 mA at Tamb ≤ 85°C
■ Power supply: Imax = 87 mA at Tamb > 85°C
Process End Connections 10 V (11 V for field-case versions) Pi = 1 W
to 30 V (dc) Ci =22 nF (± 0.2 nF/m for
Internal Diaphragm Type flying leads)
■ Swagelok tube adapter Maximum Load Equations Li =0 mH (± 2 µH/m for flying
■ Tapered threads: male NPT and Milliampere output signal, 2-wire leads)
PT (ISO 7/1) ■ Output: 4 to 20 mA ■ CSA (Canada and U.S.A.) and FM
■ Straight threads: EN (RG) and PF (RJ) ■ Supply: V (dc) = 10 V➀ to 30 V nonincendive:
■ Maximum load: Rl () ■ Class I, Division 2, Groups A, B, C,
Flush Diaphragm Type = (V [dc] – 10 V➀)  0.02 A and D
■ EN flush diaphragm – (Length of flying lead in meters ■ Class II, Division 2, Groups F and G
 0.14 /m) ■ Class III, Division 2
■ Field wiring parameters:
➀ 11 V for field-case version.
Vmax = 30 V (dc)
Imax = 100 mA at Tamb ≤ 85°C
Imax = 87 mA at Tamb > 85°C
Pi = 1 W
Ci =22 nF (± 0.2 nF/m for
flying leads)
Li =0 mH (± 2 µH/m for flying
leads)
■ Temperature class:
■ T6 at maximum ambient 140°F
(60°C)
■ T5 at maximum ambient 176°F
(80°C)
■ T4 at maximum ambient 221°F
(105°C)
 Industrial Pressure Transducers 9

T Model: Intrinsically Safe

Ordering Information
Build an T Model transducer ordering number by adding the designators as shown below.

A B C D E
PTI - T - AG160 - 1 7 AS - A

A Pressure Range D Process End Connection E Options (See pages 3 and 14.)
See pages 10 and 11. Internal Diaphragm Type For multiple options, add designators in
AO = 1/4 in. male NPT alphabetical order.
B Output Signal AP = 1/2 in. male NPT A = Special cleaning, ASME B40.1
1 = 4 to 20 mA AQ = 1/4 in. Swagelok tube adapter Level IV➀
BG = 3/8 in. Swagelok tube adapter B = Accuracy ≤ 0.25 % LPC of span
C Electrical Connector AR = 1/2 in. Swagelok tube adapter (0.125 % BFSL) (for pressure
1 =4-pin circular connector, M12 3 1 AS = 6 mm Swagelok tube adapter ranges ≥ 0.25 bar [3.6 psi,
(IP67/NEMA 4) BH = 10 mm Swagelok tube adapter 0.025 MPa, 0.25 kg/cm2, 25 kPa])
2 =Direct-wire 4 ft (1.5 m) flying lead AT = 12 mm Swagelok tube adapter C =11-Point Certificate of Calibration
(IP67/NEMA 4)➀ traceable to DKD, EN 10204 3.1
AV = G1/4B EN (1/4 RG)➀
3 =Bendix 4-pin MIL plug (IP67/ D =General Material Certificate of
AW = G1/2B EN (1/2 RG)➀
NEMA 4) Compliance, EN 10204 2.2
AX = G1/4B PF (1/4 RJ)➁
5 =L-plug, PG9 cable gland, E = Material Test Certificate,
AZ = G1/2B PF (1/2 RJ)➁
DIN EN175301-803 (IP65/NEMA 5) EN 10204 3.1, heat code traceable
BD = R1/4 PT (1/4 ISO 7 taper)
6 =L-plug, 1/2 in. NPT female F = Certificate of Accuracy,
BE = R1/2 PT (1/2 ISO 7 taper) EN 10204 2.2
conduit, DIN EN175301-803 (IP65/
NEMA 5) Flush Diaphragm Type R =Mounted cooling element, –40 to
7 =Direct-wire 4 ft (1.5 m) flying lead BV = G1/2B EN flush diaphragm 302°F (–40 to 150°C) (3 fins)➁
(IP68/NEMA 6) zero and span BJ = G1B EN flush diaphragm S =Mounted cooling element, –40 to
nonadjustable➀ ➀ Can be used with Swagelok RG adapter 392°F (–40 to 200°C) (5 fins)➁
8 =Bendix 6-pin MIL plug (IP67/
fittings. T = 9 ft (2.7 m) cable➂
➁ Can be used with Swagelok RJ adapter
NEMA 4) fittings.
Y = 16 ft (4.9 m) cable➂
A =Field case, M20  1.5 plastic Z = 32 ft (9.8 m) cable➂
cable gland, screw terminals (IP67/ Flush Diaphragm Type Only
NEMA 4X) U = Integral cooling element (2 fins)
B =Field case, M20  1.5 nickel- V =Alloy C-22 flush diaphragm (for
plated brass cable gland, screw pressure ranges ≥ 0.25 bar [3.6 psi,
terminals (IP67/NEMA 4X) 0.025 MPa, 0.25 kg/cm2, 25 kPa];
C =Field case, M20  1.5 stainless requires process end connection
steel cable gland, screw terminals BV or BJ)
(IP67/NEMA 4X) W = EPDM O-ring
D =Field case, 1/2 in. female NPT X = Fluorocarbon FKM/FPM O-ring
stainless steel conduit, screw
➀ Available only with positive pressure ranges
terminals (IP67/NEMA 4X) ≥ 0.25 bar (3.6 psi, 0.025 MPa, 0.25 kg/cm2,
➀ Ambient temperature 176°F (80°C) maximum. 25 kPa); not available with process end
connections BV or BJ; not available with
options R, S, U, W, or X. When ordered with a
piezoresistive sensor range, a halocarbon fluid
is included; for oxygen applications, maximum
media temperature is 140°F (60°C).
➁ Available only with process end connections
AP and AW; transducer-to-cooling element
connection is G1/2B EN (1/2 RG). Cooling
element is not field removable.
➂ Available only with direct-wire electrical
connectors; select electrical connector 2 or 7.
 The surface temperature of the
T model transducer and cooling
element must not exceed the
maximum ambient temperature
required for the intrinsically safe
application.
10 Industrial Pressure Transducers

Pressure Range Designators—All Models

psi bar
Over- Over-
Pressure Range Pressure Range
pressure Burst Sensor pressure Burst Sensor
Minimum Maximum Designator Rating Rating Type Minimum Maximum Designator Rating Rating Type
psi Gauge Reference bar Gauge Reference
0 NC0 72 87 0 AC0 1 2
30 NC30➀ 140 170 0.6 AC.6➀ 4 4.8
60 NC60 140 170 3 AC3 17 20.5
Vacuum Vacuum
100 NC100 140 170 Piezoresistive 5 AC5 35 42 Piezoresistive
–30 in Hg –1
160 NC160 500 600 9 AC9 35 42
200 NC200 500 600 15 AC15 80 96
300 NC300 500 600 25 AC25 50 250
5 NG5➁ 72 87 0.1 AG.1 1 2
10 NG10 72 87 0.16 AG.16 1.5 2
15 NG15 72 87 0.25 AG.25 2 2.4
25 NG25 72 87 0.4 AG.4➁ 2 2.4
30 NG30➀ 72 87 0.6 AG.6 4 4.8
50 NG50 140 170 1 AG1 5 6
Piezoresistive
60 NG60 240 290 1.6 AG1.6➀ 10 12 Piezoresistive
100 NG100 240 290 2.5 AG2.5 10 12
160 NG160 500 600 4 AG4 17 20.5
200 NG200 500 600 6 AG6 35 42
250 NG250 500 600 0 10 AG10 35 42
300 NG300 500 600 16 AG16 80 96
0
400 NG400 1 160 1 390 25 AG25 50 250
500 NG500 1 160 5 800 40 AG40 80 400
600 NG600 1 740 7 970 60 AG60 120 400
750 NG750 1 740 7 970 100 AG100 200 800
1 000 NG1000 2 900 11 600 160 AG160 320 1 000 Metal
1 500 NG1500 4 640 14 500 Metal 250 AG250 500 1 200 thin film
2 000 NG2000 4 640 14 500 thin film 400 AG400➂ 800 1 500
3 000 NG3000 7 250 17 400 600 AG600➃➄ 1 200 1 500
5 000 NG5000➂ 11 600 24 650 1 000 AG1000 1 500 3 000
8 000 NG8000➃ 17 400 34 800 bar Absolute
10 000 NG10K➄ 21 750 43 500 0.25 AA.25 2 2.4
15 000 NG15K 21 750 43 500 0.4 AA.4 2 2.4
psi Absolute 0.6 AA.6 4 4.8
15 NA15 72 87 1 AA1 5 6
25 NA25➀ 72 87 1.6 AA1.6➀ 10 12
0 Piezoresistive
50 NA50 140 170 Piezoresistive 2.5 AA2.5 10 12
0 100 NA100 240 290 4 AA4 17 20.5
250 NA250 500 600 6 AA6 35 42
Metal 10 AA10 35 42
500 NA500 1 160 5 800
thin film 16 AA16 80 96
➀ Minimum for G1/2 EN flush diaphragm; maximum for G1B EN flush diaphragm.
➁ Minimum for E model.
➂ Maximum for 3/8 and 1/2 in.; 10 and 12 mm Swagelok tube adapter.
➃ Maximum for G1/2B EN flush diaphragm.
➄ Maximum for 1/4 in. and 6 mm Swagelok tube adapter and 1/4 in. NPT.
 Industrial Pressure Transducers 11

MPa kg/cm2
Over- Over-
Pressure Range Pressure Range
pressure Burst Sensor pressure Burst Sensor
Minimum Maximum Designator Rating Rating Type Minimum Maximum Designator Rating Rating Type
MPa Gauge Reference kg/cm2 Gauge Reference
0 MC0 0.1 0.2 0 CC0 1 2
0.06 MC.06 0.4 0.48 0.6 CC.6 4 4.8
0.15 MC.15➀ 1 1.2 1 CC1 5 6
Vacuum 0.3 MC.3 1.7 2 1.6 CC1.6➀ 10 12
Piezoresistive
–0.1 0.6 MC.6 3.5 4.2 Vacuum 3 CC3 17 20.5
Piezoresistive
0.9 MC.9 3.5 4.2 –1 4 CC4 17 20.5
1.5 MC1.5 8 9.6 5 CC5 35 42
2.5 MC2.5 5 25 9 CC9 35 42
0.04 MG.04➁ 0.2 0.24 15 CC15 80 96
0.06 MG.06 0.4 0.48 25 CC25 50 250
0.1 MG.1 0.5 0.6 0.6 CG.6 4 4.8
0.16 MG.16➀ 1 1.2 1 CG1 5 6
0.25 MG.25 1 1.2 1.6 CG1.6➀ 10 12
Piezoresistive
0.4 MG.4 1.7 2 2.5 CG2.5 10 12
0.6 MG.6 3.5 4.2 4 CG4➁ 17 20.5
Piezoresistive
1 MG1.0 3.5 4.2 6 CG6 35 42
1.6 MG1.6 8 9.6 10 CG10 35 42
0
2.5 MG2.5 5 25 16 CG16 80 96
4 MG4 8 40 0 25 CG25 50 250
6 MG6 12 40 40 CG40 80 400
10 MG10 20 80 60 CG60 120 400
16 MG16 32 100 Metal 100 CG100 200 800
25 MG25 50 120 thin film 160 CG160 320 1 000
40 MG40➂ 80 150 Metal
250 CG250 500 1 000
thin film
60 MG60➃➄ 120 150 400 CG400➂ 800 1 500
100 MG100 150 300 600 CG600➃➄ 1 200 1 500
1 000 CG1000 1 500 3 000

kPa
Over-
Pressure Range pressure Burst Sensor
Minimum Maximum Designator Rating Rating Type
kPa Gauge Reference
0 JC0 100 200
60 JC60➀ 400 480
Vacuum 300 JC300 1 700 2 000
Piezoresistive
–100 500 JC500 1 700 2 000
900 JC900 3 500 4 200
1 500 JC1500 8 000 9 600
40 JG40➁ 200 240
60 JG60 400 480
100 JG100 500 600
160 JG160➀ 1 000 1 200
250 JG250 1 000 1 200
Piezoresistive
400 JG400 1 700 2 000
600 JG600 3 500 4 200
1 000 JG1000 3 500 4 200
1 600 JG1600 8 000 9 600
0 2 500 JG2500 5 000 25 000
4 000 JG4000 8 000 40 000
6 000 JG6000 12 000 40 000
10 000 JG10K 20 000 80 000
16 000 JG16K 32 000 100 000
Metal
25 000 JG25K 50 000 120 000
thin film ➀ Minimum for G1/2 EN flush diaphragm; maximum for G1B EN flush diaphragm.
31 500 JG31.5K 50 000 120 000
➁ Minimum for E model.
40 000 JG40K➂ 80 000 150 000
➂ Maximum for 3/8 and 1/2 in.; 10 and 12 mm Swagelok tube adapter.
60 000 JG60K➃➄ 120 000 150 000
➃ Maximum for G1/2B EN flush diaphragm.
100 000 JG100K 150 000 300 000 ➄ Maximum for 1/4 in. and 6 mm Swagelok tube adapter and 1/4 in. NPT.
12 Industrial Pressure Transducers

Dimensions
Choose electrical connector, body type, Electrical Connector A
and process end connection, and add
together for overall height of transducer.
Dimensions, in inches (millimeters), are for
reference only and are subject to change.
Body B

Process End Connection C 0.33

(8.5)

A Electrical Connector 1.36

(34.5)
3.54 (90.0) max

0.42 1.36 1.36

(10.7) (34.5)
(34.5)
2.60
0.71 (66.0)
0.39
(18.0) (9.9) M20 
1.5
cable
0.94 gland
(24.0)
hex
4-Pin Circular Direct-Wire, Zero and Bendix 4-Pin or 6-Pin Field Case,
Connector M12 3 1 Span Adjustable MIL Plug Connector M20  1.5 Cable Gland

1.06
(27.0)
3.31 (84.0)
2.03 1.87
(51.5) (47.6)

1.14 1.19
(29.0) (30.3) 2.60
1.00 (66.0)
(25.4)
1/2 in.
female
NPT
conduit

L Plug with PG9 L Plug with 1/2 in. Direct-Wire, Zero and Field Case,
Cable Gland Female Conduit Span Nonadjustable 1/2 in. Female NPT Conduit

B Body
S Model E Model T Model

A A 1/2 in.
male NPT
conduit
with
cable
1.06 1.06
(27.0) (27.0)
2.56
Plug Direct-Wire 3.30 (65.0) 2.13
(83.8) (54.0)

Body Model A
Style Accuracy in. (mm)
≤ 0.5 % 1.77 (45.0)
Plug
≤ 0.25 % 2.56 (65.0) 1.06 1.06
(27.0) (27.0)
Direct-wire ≤ 0.5 % 1.52 (38.5)
zero and span 1.06 Plug Field Case
≤ 0.25 % 2.13 (54.0) (27.0)
nonadjustable
 Industrial Pressure Transducers 13

Dimensions

C Process End Connection

1.06 1.06 1.06 1.06 1.06

(27.0) (27.0) (27.0) (27.0) (27.0)
hex hex hex hex hex
0.81
(20.6)
1.05
(26.6) 1.34 1.39
(33.9) (35.4) 1.65
(42.0)

1/4 in. Male NPT 1/2 in. Male NPT 1/4 in. and 6 mm 3/8 in. and 10 mm 1/2 in. and 12 mm
and and Swagelok Tube Swagelok Tube Swagelok Tube
R1/4PT (ISO 7/1 Taper) R1/2PT (ISO 7/1 Taper) Adapter Adapter Adapter

1.06 1.06 1.06

(27.0)
1.06 (27.0)
(27.0) (27.0)
hex hex hex
hex
0.89 1.04
(22.6)
1.21 (26.5) 1.28
(32.5)
(30.6)

G1/4B EN (1/4 RG) G1/2B EN (1/2 RG) G1/4B PF (1/4 RJ) G1/2B PF (1/2 RJ)

1.06 1.61
(27.0) (41.0)
hex hex
1.18 1.22 1.06 1.61
(29.9) (31.0) (27.0) (41.0)
1.79 hex 1.79 hex
(45.5) (45.5)

G1/2B EN Flush Diaphragm G1B EN Flush Diaphragm G1/2B EN Flush Diaphragm G1B EN Flush Diaphragm
with Integral Cooling with Integral Cooling
Element (2 Fins) Element (2 Fins)

1.06 1.06 1.06 1.06

(27.0) (27.0) (27.0) (27.0)
hex hex hex hex

3.23 3.27
(82.0) 3.62 (83.0) 3.66
1.06 (92.0) 1.06 (93.0)
(27.0) (27.0)
hex 1.06 hex 1.06
(27.0) (27.0)
hex hex

1/2 in. Male NPT with 1/2 in. Male NPT with G1/2B EN with Mounted G1/2 EN with Mounted
Mounted Cooling Element Mounted Cooling Element Cooling Element Cooling Element
–40 to 302°F (–40 to 150°C) –40 to 392°F (–40 to 200°C) –40 to 302°F (–40 to 150°C) –40 to 392°F (–40 to 200°C)
(3 Fins) (5 Fins) (3 Fins) (5 Fins)
 14 Industrial Pressure Transducers

Options Accessories
Options are specified in transducer ordering numbers as shown in Ordering Attachable Indicator Display
Information for each model.
This LCD, 4-digit digital display
attaches directly to S model
EPDM and Fluorocarbon Alloy C-22 Diaphragm transducers using an L-plug connector
FKM/FPM O-Rings An alloy C-22 diaphragm is available and 4 to 20 mA output signals. The
EPDM or fluorocarbon FKM/FPM for flush diaphragm-type transducers display provides local readout of
O‑rings are available for flush with pressure ranges equal to or higher system pressure with simultaneous
diaphragm-type transducers. than 0.25 bar (3.6 psi, 0.025 MPa, signal transmission.
FKM is the designation for fluorinated 0.25 kg/cm2, 25 kPa).
elastomers as defined in ASTM D1418; Features
FPM is the international designation
Cables ■ Retrofits to transducers already in
defined in ISO/DIN 1629. Optional cable lengths are available. use
See Ordering Information for lengths ■ Adjustable and programmable with
available for each transducer model. flush-mounted keys below the front
cover
■ Rugged, compact plastic case meets
Cooling Elements IP65
Cooling elements extend the temperature Mounted cooling elements (option ■ CE conformity to 89/336/EEC
ratings of pressure transducers. designators R and S) have three and ■ Integrated self-diagnosing circuit
Integral cooling elements (option five cooling fins, respectively, and are monitoring
designator U) have two cooling fins available on S and T model transducers
with internal diaphragms. Performance
and are available on S and T model
transducers with flush diaphragms. See the graph below for cooling ■ Accuracy: 0.2% of span ± 1 digit
element selection information. ■ Scale adjustment: manually
programmed, menu driven

Cooling Element Ratings—Media vs Ambient Temperature Display

■ Range: –1999 to 9999
Media Temperature, °C
40 80 120 160 200 240 280 ■ Pickup rate: 5/s
250
Cooling Element ■ 4-digit LCD, 0.40 in. (10.2 mm) high
Ambient Temperature, °C
Ambient Temperature, °F

100 U Integral,
200 2 cooling fins Housing
R Mounted, ■ Material: ABS plastic
70 3 USA
cooling fins
150
S Mounted, Electrical Data
5 cooling fins ■ Input/output signal: 4 to 20 mA
40
100 ■ Voltage drop: 3 V
U R S
■ Maximum current rating: 40 mA
50 10 ■ Power supply: supplied by the 4 to
100 200 300 400 500 600
20 mA loop
Media Temperature, °F

Examples: For an ambient temperature of 150°F (65°C) and a media temperature of 250°F
(121°C), cooling elements U, R, and S would be suitable.
For an ambient temperature of 150°F (65°C) and a media temperature of 350°F
(176°C), only cooling elements R and S would be acceptable.
100 200 300 400 500 600
250

100
200

70
150
EURO

40
100
U R S

10 50
40 80 120 160 200 240 280
 Industrial Pressure Transducers 15

Accessories
Remote Panel-Mount Display
The Swagelok compact remote panel meter digital
indicator can accept many types of signal inputs and
requires a supply voltage of 9 to 28 V (dc). The panel
meter is fully user adjustable and programmable. The
user-adjust­able digital filtering improves readability
during rapid pressure changes.

Temperature Rating Features Temperature Rating

■ Ambient: ■ Two programmable switching ■ Operating –4 to 122°F (–20 to 50°C)
32 to 122°F (0 to 50°C) outputs ■ Storage –22 to 158°F (–30 to 70°C)
■ Storage: ■ Ingress protection IP54➀
–22 to 176°F (–30 to 80°C) ■ Alarm delay
Wiring
■ Influence on display: ■ Screw terminals, maximum wire
■ User-programmable
0.1 % per 18°F (10°C) cross-section 1.5 mm2, two separate
■ EASYbus interface, galvanically terminal blocks—one for power,
Ordering Number isolated switching output, transducer, and
PTI-AI ■ CE conformity to 89/336/EEC one for EASYbus interface
➀ Front protection IP65 when properly installed
Dimensions in panel by using the provided seals. Switching Outputs
Dimensions, in inches (millimeters), are Input Signals ■ Number: Two individually adjustable
for reference only and are subject to ■ Function: Minimum/maximum
■ 0 to 20 mA, 4 to 20 mA
change. adjustable by setting hysteresis
■ 0 to 1 V, 0 to 2 V, 0 to 10 V
■ Adjustable: Within configured
3.62 ■ 0 to 50 mV➀
(91.9) measurement range
1.97 ➀ < 0.3 % of span ± 1 digit accuracy.
(50.0) ■ Hysteresis: Adjustable
Power Supply ■ Response time: ≤ 20 ms
1.61 ■ 9 to 28 V (dc) ■ Accuracy: Actual value by means of
(40.9) 1.97
(50.0) ■ Current consumption: digital control
Maximum 30 mA (without alarm ■ Contacts: Two separate transistor
output and EASYBus interface) switching outputs (selectable
2.05 switching mode)
(52.0) Display
■ Low-side (NPN) or High-side (PNP) or
1.54 ■ Type: Push Pull
(39.2) LED, 4 digits, 0.40 in. (10.2 mm) high
■ Low-side: Maximum 28 V/1 A
■ Range:
■ High-side: Maximum power
–1999 to 9999
supply (Ub/200 mA)
■ Refresh rate:
100 readings per second Ordering Number
■ Decimal point: PTI-PM
freely programmable
■ Accuracy:
0.2 % of span ± 1 digit

Dimensions
Dimensions, in inches (millimeters), are for reference only and are subject to
change.
2.56
(65.0)
1.89 Panel Cutout
(48.0)
0.28 0.35
(7.0) (9.0)

0.94 0.85
(24.0) (21.7)

1.77
(45.0)
Accessories
Cooling Elements Cables and Connectors
Thread-on cooling element adapters
are available for use with G1/2B EN
(1/2 RG) process connections on
S model transducers only. These
cooling adapters increase the media
temperature ratings.

Ordering
Description Number
G1/2B EN (1/2 RG), 302°F (150°C) media,
PTI-CE150-AW
86°F (30°C) ambient (3 fins)
G1/2B EN (1/2 RG), 392°F (200°C) media,
PTI-CE200-AW
86°F (30°C) ambient (5 fins)
1/2 in. male NPT, 302°F (150°C) media,
PTI-CE150-AP
86°F (30°C) ambient (3 fins)
1/2 in. male NPT, 392°F (200°C) media, Mating Ordering
PTI-CE200-AP Connector Number
86°F (30°C) ambient (5 fins)
Bendix, 9 ft (3 m) cable,
PTU-MC-1
4-wire, UL listed➀
Bendix, no cable, 4-pin PTU-MC-2
M12 3 1, 6 ft (2 m) cable,
PTU-MC-3
straight, 4-wire
M12 3 1, 16 ft (5 m) cable,
PTU-MC-4
Weld Adapters straight, 4-wire
M12 3 1, 6 ft (2 m) cable,
Field-installed weld adapters 90° angled, 4-wire
PTU-MC-5
with factory machined
M12 3 1, no cable,
mating ports are available for PTU-MC-6
straight, 4-pin
the G1/2B EN and G1B EN M12 3 1, no cable,
flush diaphragm process PTU-MC-7
90° angled, 4-pin
connections. M12 3 1, 6 ft (2 m) cable,
PTU-MC-8
straight, 5-wire, UL listed➁
M12 3 1, 16 ft (5 m) cable,
PTU-MC-9
straight, 5-wire, UL listed➁
M12 3 1, 6 ft (2 m) cable,
PTU-MC-10
Ordering 90° angled, 5-wire, UL listed➁
Description Number M12 3 1, 16 ft (5 m) cable,
PTU-MC-11
G1/2B EN flush diaphragm weld adapter PTI-WA-BV 90° angled, 5-wire, UL listed➁
G1B EN flush diaphragm weld adapter PTI-WA-BJ M12 3 1, no cable,
PTU-MC-12
straight, 5-pin
M12 3 1, no cable,
PTU-MC-13
90° angled, 5-pin
M12 3 1 male, no cable,
PTU-MC-14
90° angled, 4-pin,
M12 3 1, 32 ft (10 m) cable,
PTU-MC-15
90° angled, 4-wire, UL listed➁
➀ UL style 2164/1061, temperature rating 176°F (80°C).
➁ UL style 20549/1061, temperature rating 176°F (80°C).

Safe Product Selection Warranty Information

When selecting a product, the total system design must Swagelok products are backed by The Swagelok Limited
be considered to ensure safe, trouble-free performance. Lifetime Warranty. For a copy, visit swagelok.com or contact
Function, material compatibility, adequate ratings, your authorized Swagelok representative.
proper installation, operation, and maintenance are the
Swagelok—TM Swagelok Company
responsibilities of the system designer and user. FM —TM FM Global
CSA—TM Canadian Standards Association
Elgiloy—TM Elgiloy Specialty Metals
© 2010–2011 Swagelok Company
Caution: Do not mix or interchange parts with those of Printed in U.S.A., GLI
other manufacturers. April 2011, R5
MS-02-225