Scribd
Upload
22 views1 page

Amc 67

This document provides instructions for using the Audio Mix tool in Media Composer to adjust the volume and pan of individual clips. Users are guided to open the Audio Mixer, set it to Clip Volume and Pan mode, and input specific values to control the pan settings. The values range from 0 for mid, -100 for left, and +100 for right channels.

Uploaded by

Andoniaina Rakotoarimanana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
22 views1 page

Amc 67

This document provides instructions for using the Audio Mix tool in Media Composer to adjust the volume and pan of individual clips. Users are guided to open the Audio Mixer, set it to Clip Volume and Pan mode, and input specific values to control the pan settings. The values range from 0 for mid, -100 for left, and +100 for right channels.

Uploaded by

Andoniaina Rakotoarimanana
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Getting Assets into Your Media Composer Project

Using the Audio Mix tool


This method affects only one clip at a time:

1. Open the Audio Mixer tool from the Tools menu.


2. Set the Audio Mixer to Clip Volume and Pan mode, which is abbreviated simply as
Clip. This is done by clicking on the Audio Mixer Mode button in the upper right-hand
corner of the Audio Mixer tool.
3. Load a Master Clip into the Source Window.
4. Select the pan entry/display box (see the following screenshot).

5. Enter one of the following values:


‰‰ 0 (zero) to set the pan to MID
‰‰ -100 to set the pan to 100% left channel
‰‰ +100 to set the pan to 100% right channel

6. Press Enter.

52

You might also like