PT-DZ570 Series

1-Chip DLP™ Projectors

PT-DZ570U
PT-DW530U
PT-DX500U

Visual Satisfaction,
Dependable Solutions.

PT-DZ570U PT-DW530U PT-DX500U

WUXGA WXGA XGA
4,000 lm 4,000 lm 4,500 lm
High Performance and Reliability
Made Affordable
The PT-DZ570 Series projectors
incorporate a wealth of original Panasonic
technologies to bring high-quality images
to all kinds of operating conditions and
applications. They offer better reliability
and require less maintenance. Plus, the
PT-DZ570 Series features convenient
functions to facilitate either a new
installation or the replacement of an
existing system. They are compact,
affordable 1-chip DLP™ projectors with
a long list of features and functions,
including optional wireless operation. PT-DZ570U PT-DW530U PT-DX500U
4,000 lm 4,000 lm 4, 500 l m
W U XG A ( 1 9 2 0 × 1 2 0 0 ) W XG A ( 1 2 8 0 × 8 0 0 ) XG A (1024 × 768)

Excellent Image Quality

A Full 4,500/4,000 Lumens of Brightness minimizing the unallocated portions between the col- Waveform Monitor Function (PT-DZ570U)
and Contrast of 2,000:1 ors, to achieve truly vivid coloring. When the output level of the source device fluctuates
The 300-watt AC lamp unit features an efficient light • Lamp Modulation Drive System due to the performance of the device or its cable
focusing reflector. Using only a single lamp unit, the With the advanced lamp modulation technology, the connections, the original black and white levels of the
PT-DX500U achieves 4,500 lumens of brightness, while projector is now able to control the lamp intensity for image content cannot be reproduced correctly. With the
the PT-DZ570U and PT-DW530U offer 4,000 lumens. All each of the red, green, blue and white segments of PT-DZ570U, you can view the waveforms on the screen
models boast a high contrast ratio of 2,000:1. the color wheel separately. Because the actual light and adjust the settings either automatically or manually
output is controlled in relation to each color segment, as you prefer.
RGB Booster Significantly Improves Color light usage is optimized, and color balance is White Level Adjustment
Reproduction obtained without lowering the brightness. This results
The RGB Booster achieves high image quality with levels in bright, vivid images with increased color fidelity.
of color reproduction and brightness that make each
color stand out. It combines Panasonic’s proprietary Vivid Detail Clarity Processor 3 Brings
Color Control technology with a Lamp Modulation Drive Depth and Clarity to Details Before After
System for a 1-chip DLP™ projector that produces The frequency of the video signal is analyzed for each
bright and vivid colors. scene, and distribution data is extracted for the ultra
• Vivid Color Control high, high, medium and low-range frequencies. This
This unique control technology optimizes the use of unique Panasonic image correction circuit optimally
the color segment areas of the color wheel. It enhances each area of the screen. High-precision
increases the brightness of each RGB color by detection is applied from 2-dimensional horizontal/
vertical data to produce more natural, lifelike images
• RGB Booster with high definition.
Color wheel
Daylight View Premium for Black Level Adjustment
Better Color Perception* 1
This function corrects the image quality to project sharp,
Lamp power
clear images even in brightly lit rooms. A luminance
sensor measures the ambient brightness, and a real- Before After
time adjustment function optimizes sharpness and
By modulating the lamp power, we can brightness according to the surroundings. This adjust-
maximize the color reproduction of each color ment function also works together with the Detail Clarity Rec. 709 Mode for HDTV Projection
without sacrificing brightness. Light usage is
optimized, and color balance is obtained
Processor 3 to enhance the realism and vividness of Optimal color reproduction can be achieved by selecting
without lowering the brightness. projected images. This makes images easier to view and this mode, compliant with ITU-R Recommendation BT.709,
offers high contrast. when images from an HDTV source are projected.
• Conventional system
Color wheel

Lamp power

Simulated image with Daylight View Simulated image with Daylight View
Because the lamp power was fixed in Premium turned off. Premium turned on.
conventional projectors, color reproduction
was enhanced by sacrificing brightness.

2
DICOM Simulation Mode* 2 & Control Software Ver. 2” allows the user to control and
This imaging mode is similar to DICOM Part 14, which is monitor multiple projectors at the same time over a Eco Management Functions
a medical imaging standard. It reproduces X-ray images wired LAN. When a problem occurs, an alarm message A number of functions are provided to reduce power
with remarkable clarity. It also allows information to be is sent to the monitoring/controlling PC. consumption. They adjust the brightness according to the
shared by many viewers on a large screen, such as ambient light conditions and
during conferences or training courses. reduce the lamp power when

Installation/
Normal Mode
there is no signal input or the
projector is in the AV Mute mode.

Operation Flexibility
H/V Lens Shift and 2x Zoom Lens
In new installations, the horizontal/vertical lens shift lets
you accommodate a wide range of room sizes and
shapes. And when replacing existing projectors, the 2x
zoom greatly enhances your ease of installation and can
reduce costs by permitting the use of existing mounting
positions and cablings.
DICOM Simulation Mode Under bright conditions.

Flexible Angle Setting

Full HD-ready WUXGA Resolution (PT-DZ570U) The unit can be rotated 360°
In response to the increasing popularity of widescreen vertically. This means you can
image viewing, including Blu-ray content, the PT-DZ570U install it at any up-and-down
features native WUXGA resolution for high-definition angle you wish to accommo-
viewing. This brings you lifelike projection of intricate, date different installation con- 360°
highly detailed images. ditions.

Advanced Technologies for Lens-centered Design

Excellent Image Quality A lens-centered, symmetrical design provides ease of
• 3D color management system installation, eliminating the need for any special con- Under dark conditions.
• Full 10-bit image processing siderations when planning the installation site.
• Progressive cinema scan (3:2 pulldown)
• Dynamic sharpness control Multiple Terminals Other Valuable Features
• Digital noise reduction Interfaces include a DVI-D and HDMI inputs. The serial • Direct Power Off
• IP conversion terminal (RS-232C) has an Emulate function that lets • Scheduling function
• AI scene control you continue using existing control systems when replac- • Customizable function button
ing a previous Panasonic model. It is also possible to • 15m (49ft) long-range wireless remote
output audio during Standby mode. This is convenient control

Improved Reliability
when connecting an external audio system through the • Security features: user password, text
projector. superimposing and logo (default or

and Reduced
original)
Side-by-Side Function* 6 • HDTV compatibility
The PT-DZ570U/DW530U can simultaneously display • Variable audio output for the external
Maintenance images from two sources onto a single screen. For
example, you can display a PC image on the left and a •
speaker system
AV mute for image/sound muting
video image on the right. • Selectable 9-language on-screen menu
Newly Designed Original Cooling System Taking advantage of the • Built-in closed caption decoder
The cooling system is newly designed to optimize the wide-screen projection,
airflow inside the unit. As a result, it offers better cooling this function gives you a
efficiency and allows the projector to be used in ambient host of new application Ecology-conscious Design
temperatures up to 45°C (113°F )* .
3
possibilities to explore. Panasonic works from every angle to minimize environmental
impact in the product design, production and delivery processes,
and in the performance of the product during its life cycle. The
Lamp and Lamp Air Filter Replacement Easy Wireless Projection from Multiple PCs PT-DZ570 Series projector reflects the following ecological con-
Cycle of 2,000 Hours* 4 (Optional) siderations.
The new cooling system combines with a dust-resistant The optional Wireless Module ET-WM200U allows the • No halogenated flame retardants are used in the cabinet.
• Non-coated cabinet for easy recycling.
design based on a sealed optical block to achieve a PT-DZ570 Series to operate wireless projection for a • Lead-free solder is used to mount components to the printed
lamp and lamp air filter replacement cycle of 2,000 smooth, hassle-free presentation. You can make the set- circuit boards.
• Lamp power switching further reduces power consumption.
hours* . This greatly reduces maintenance hassles.
4
tings for wireless connection quickly and easily using • “ECO” button on the remote control.
Wireless Manager ME 5.5 software. When the presenta- • Standby power consumption of only 0.3 W * 7 has been
achieved (standby mode: ECO).
Easy Lamp Replacement tion is finished, Wireless Manager restores the PC to its • Auto Power Save activates standby mode when no signal is
For easier maintenance, you can previous LAN settings, so the PC is ready to reconnect input.
• RoHS compliant
replace the lamp from the rear. to your LAN. Functions include Live mode and Multi-Live
The lamp is easily replaced even mode. In Live mode, the
after the projector is installed on image projected is identical
the ceiling. to the image seen on the NOTES
PC screen. In Multi-Live * 1 There is no actual change in the rated brightness or contrast
ratio.
Quiet, 29 dB* 5 Operation mode, you can wirelessly * 2 This product is not a medical instrument. Do not use it for
An original cooling system enhances the compact body connect with multiple PCs. actual medical diagnosis.
and enables the projector to operate at a quiet 29 dB.*
5
* 3 The operating temperature range is 0°C to 40°C ( 32°F to
104°F ) when the fan control is set to HIGH Altitude mode (for
1,400 m [4,593 ft] to 2,700 m [ 8,858 ft] above sea level ).
Web Browser Control over a Wired LAN * 4 When a lamp mode is set to NORMAL. The lamp replacement
cycle is 3,000 hours when the lamp mode is set to ECO. A
The PT-DZ570 Series can be easily operated remotely maximum value when the lamp is used in cycles of being
turned on for 2 hours and off for 0.25 hours. When the lamp is
over a LAN, because it is done using the computer’s turned on and off more frequently, the lamp replacement cycle
Web browser. Furthermore, the projector sends an email is shortened.
message to notify the operator when an error has * 5 When the lamp mode is set to ECO ; 35 dB when the lamp
mode is set to Normal. Measurement, measuring conditions
occurred, or a lamp needs to be replaced. and method of notation all comply with ISO 21118 international
standards.
* 6 This function is not effective for some source combinations.
Multi Projector Monitoring & Control * 7 At 100 –120 V AC ( 0.4 W at 220 –240 V AC ). When the standby
mode is set to ECO, network functions such as power on over
Software Ver. 2 the L AN will not operate. Also, only certain commands can be
Panasonic’s original freeware “Multi Projector Monitoring received for external control using the serial terminal.

3
Specifications Dimensions unit: millimeters (inches)
Model PT-DZ570U PT-DW530U PT-DX500U 332 484.5
Power supply 100 – 240 V AC, 5.0 –1.9 A, 50/60 Hz (13-1/16) (19-1/16)
Power consumption 415 W (500 VA) (0.3 W at 100 –120 V AC, 0.4 W at 220 –240 V AC with standby mode set to ECO* 1, 15 W with standby mode set to NORMAL)

(6-5/8)
168
DLP™ chip 17.0 mm (0.67 inches) diagonal 16.5 mm (0.65 inches) diagonal 17.8 mm (0.70 inches) diagonal
( 16:10 aspect ratio ) ( 16:10 aspect ratio ) ( 4:3 aspect ratio )
DLP™ chip × 1, DLP™ projection system DLP™ chip × 1, DLP™ projection system DLP™ chip × 1, DLP™ projection system
2,304,000 (1,920 × 1,200) pixels 1,024,000 (1,280 × 800) pixels 786,432 (1,024 × 768) pixels
Lens Manual zoom (2× zoom), manual focus F 2.0 – 3.4, f 21.5 – 43.0 mm
Projection Distance unit: meters (feet)
Lamp 300 W (max 310 W) UHM lamp
Screen size (diagonal) 1.02–7.62 m (40 – 300 inches), 16:10 aspect ratio 1.02–7.62 m (40– 300 inches), 4:3 aspect ratio PT-DZ570U (16:10 aspect ratio; throw ratio: 1.45 – 2.94:1)
Brightness* 2 4,000 lm (lamp mode: NORMAL) 4,500 lm (lamp mode: NORMAL)
Projection size Projection distance Height from edge
Center-to-corner uniformity* 2 90% (diagonal) Min Max of screen to center
Contrast* 2 2,000:1 (full on/full off) (wide) (telephoto) of lens
Resolution 1,920 × 1,200 pixels 1,280 × 800 pixels 1,024 × 768 pixels 1.02 m 1.23 2.51 -0.05 – 0.27
(input signals that exceed this resolution will (input signals that exceed this resolution will
be converted to 1,280 × 800 pixels) be converted to 1,024 × 768 pixels) 40˝ (4.1) (8.2) (-0.2 – 0.9)
Scanning HDMI/DVI-D f H : 27 kHz–100 kHz; f V : 24 Hz–120 Hz; dot clock: 25 MHz–162 MHz 1.52 m 1.87 3.79 -0.08 – 0.40
frequency RGB f H : 15 kHz–100 kHz; f V : 24 Hz–120 Hz; dot clock: 162 MHz or lower 60˝ (6.2) (12.4) (-0.3 – 1.3)
YPBPR (YCBCR) f H : 15.75 kHz; f V : 60 Hz (480i [525i]) f H : 45.00 kHz; f V : 60 Hz (720 [750]/60p) f H : 27.00 kHz; f V : 24 Hz (1080/24p) 2.03 m 2.51 5.07 -0.11 – 0.54
f H : 31.50 kHz; f V : 60 Hz (480p [525p]) f H : 33.75 kHz; f V : 60 Hz (1035/60i) f H : 27.00 kHz; f V : 48 Hz (1080/24sF)
f H : 15.63 kHz; f V : 50 Hz (576i [625i]) f H : 33.75 kHz; f V : 60 Hz (1080 [1125]/60i) f H : 33.75 kHz; f V : 30 Hz (1080/30p) 80˝ (8.3) (16.6) (-0.4 – 1.8)
f H : 31.25 kHz; f V : 50 Hz (576p [625p]) f H : 28.13 kHz; f V : 50 Hz (1080 [1125]/50i) f H : 67.50 kHz; f V : 60 Hz (1080/60p) 2.54 m 3.15 6.34 -0.14 – 0.67
f H : 37.50 kHz; f V : 50 Hz (720 [750]/50p) f H : 28.13 kHz; f V : 25 Hz (1080/25p) f H : 56.25 kHz, f V : 50 Hz (1080/50p) 100˝ (10.4) (20.8) (-0.4 – 2.2)
Video/S-Video f H : 15.75 kHz; f V : 60 Hz (NTSC/NTSC4.43/PAL-M/PAL60), f H : 15.63 kHz; f V : 50 Hz (PAL/PAL-N/SECAM)
Optical axis shift Vertical +60% from center of screen (manual) +70% from center of screen (manual) +60% from center of screen (manual)
3.81 m 4.75 9.53 -0.20 – 1.01
Horizontal ±10% from center of screen (manual) ±10% from center of screen (manual) ±10% from center of screen (manual) 150˝ (15.6) (31.2) (-0.7 – 3.3)
Keystone correction range Vertical: ±40° 5.08 m 6.35 12.73 -0.27 – 1.35
200˝ (20.9) (41.7) (-0.9 – 4.4)
Installation Ceiling/floor, front/rear
Terminals HDMI IN HDMI 19-pin × 1 (Deep Color, compatible with HDCP)
7.62 m 9.55 19.11 -0.40 – 2.02
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, 300˝ (31.4) (62.6) (-1.3 – 6.6)
VGA (640 × 480) – WUXGA (1,920 × 1,200)* 3; compatible with non-interlaced signals only; dot clock: 25 –162 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
DVI-D IN DVI-D 24-pin × 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) PT-DW530U (16:10 aspect ratio; throw ratio: 1.53 – 3.09:1)
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, Projection -size Projection distance Height from edge
VGA (640 × 480) – WUXGA (1,920 × 1,200)* 3; compatible with non-interlaced signals only; dot clock: 25 –162 MHz PT-DZ570 U (16:10)
RGB 1 IN BNC × 5 (RGB/YPBPR × 1) (diagonal) Min Max of screen to center
RGB 2 IN D-sub HD 15-pin (female) × 1 (RGB/YPBPR × 1) (wide) (telephoto) of lens
VIDEO IN BNC × 1 (composite video)
S-VIDEO IN Mini DIN 4-pin × 1 (S-Video) 1.02 m 1.29 2.64 -0.11 – 0.27
AUDIO IN 1 RCA × 2 (L, R × 1), 0.5 Vrms 40˝ (4.3) (8.6) (-0.4 – 0.9)
AUDIO IN 2 M3 × 1 (L, R × 1), 0.5 Vrms
AUDIO IN 3 M3 × 1 (L, R × 1), 0.5 Vrms 1.52 m 1.96 3.98 -0.16 – 0.40
AUDIO OUT M3 × 1 (L, R × 1) (monitor out: 0 – 2.0 Vrms, variable) 60˝ (6.5) (13.0) (-0.5 – 1.3)
SERIAL IN D-sub 9-pin (female) × 1 for external control (RS-232C compliant) 2.03 m 2.64 5.32 -0.22 – 0.54
REMOTE IN D-sub 9-pin (female) × 1 for external control (contact control)
LAN RJ-45 × 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™) 80˝ (8.7) (17.4) (-0.7 – 1.8)
Cabinet materials Molded plastic (PC+ABS) 2.54 m 3.31 6.66 -0.27 – 0.67
100˝ (10.9) (21.8) (-0.9 – 2.2)
Dimensions (W x H x D) 332 × 168* 4 × 484.5 mm (13-1/16˝ × 6-5/8˝ * 4 × 19-1/16˝ ) (including the lens)
3.81 m 4.99 10.01 -0.40 – 1.01
Weight Approximately 8.5 kg (18.7 lbs.)
150˝ (16.4) (32.8) (-1.3 – 3.3)
Operating environment Operating temperature: 0°C – 45°C (32°F– 113°F); operating humidity: 20%–80% (no condensation)
5.08 m 6.67 13.36 -0.54 – 1.35
Supplied accessories Power cord with security lock, wireless remote control unit, batteries for remote control (AA type × 2), wire rope, 200˝ (21.9) (43.8) (-1.8 – 4.4)
software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)
7.62 m 10.03 20.07 -0.81 – 2.02
* 1 When the standby mode is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using 300˝ (33.0) (65.8) (-2.7 – 6.6)
the serial terminal.
* 2 Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards.
* 3 Compliant with VESA CVT-RB. PT-DX500U (4:3 aspect ratio; throw ratio: 1.51– 3.05:1)
* 4 With legs at shortest position.
Projection size
PT-DW530 Projection
- U (16:10) distance Height from edge
(diagonal) Min Max of screen to center
Terminals (wide) (telephoto) of lens
1 2 3 4 5 6 7 1.02 m 1.20 2.46 -0.06 – 0.31
40˝ (4.0) (8.0) (-0.2 – 1.0)
1. LAN connector 8. Audio 1 input 1.52 m 1.82 3.70 -0.09 – 0.46
2. HDMI input 9. Audio 2 input 60˝ (6.0) (12.1) (-0.3 – 1.5)
3. Video input 10. Audio 3 input 2.03 m 2.45 4.95 -0.12 – 0.61
4. S-Video input 11. Audio output 80˝ (8.1) (16.2) (-0.4 – 2.0)
5. RGB 1 input 12. Remote input 2.54 m 3.08 6.20 -0.15 – 0.76
100˝ (10.1) (20.3) (-0.5 – 2.5)
6. RGB 2 input 13. Serial input
3.81 m 4.64 9.32 -0.23 – 1.14
7. DVI-D input 150˝ (15.3) (30.5) (-0.8 – 3.8)
5.08 m 6.21 12.44 -0.31 – 1.52
The photo shows the PT-DZ570U/DW530U. 200˝ (20.4) (40.8) (-1.0 – 5.0)
Note that the DVI-D input terminal on the
7.62 m 9.34 18.68 -0.46 – 2.29
8 9 10 11 12 13 PT-DX500U is located between the LAN 300˝ (30.7) (61.2) (-1.5 – 7.5)
connector and the HDMI input.

NOTES ON USE Optional Accessories

1. Do not install the projector in locations that are subject to excessive water, humidity, steam or oily smoke. Doing so may result in fire, mal- PT-DX500 - U (4:3)
function or electric shock. ET-PKD110H ET-PKD110S
2. The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to Ceiling mount
illuminate, due to impact or extended use. Ceiling mount bracket
3. The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions: bracket for low ceilings
• Never place objects on top of the projector while it is in operation. for high ceilings
• Make sure there is an unobstructed space of 500 mm (19-11/16 in) or more around the projector’s exhaust openings.
• Do not stack projector units directly on top of one another for the purpose of multiple (stacked) projection.
When stacking projector units, be sure to provide the amount of space indicated between them. These space requirements also apply to
installation where only one projector unit is operating at one time and the other unit is used as a backup.
• If the projector is placed in a box or enclosure, the temperature of the air surrounding the projector must be between 0°C (32°F) and 40°C
(104°F). Also, make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the
exhaust openings is not sucked into the intake. ET-WM200U ET-LAD60A
4. The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods. Wireless module Replacement lamp unit
• The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and
usage conditions. ET-LAD60AW
• The brightness of the lamp will gradually decrease with use. Replacement lamp unit
5. Due to natural characteristics of lamps, screen brightness may vary (flicker). This is not an indication of faulty lamp performance. (twin pack)

For more information about Panasonic projectors

http://panasonic.net/avc/projector

JQA-0443 EC98J2010 051

Factories of Systems Business Group have received ISO 14001:2004—
the Environmental Management System certification (except for third
parties’ peripherals).

Weights and dimensions shown are approximate. Specifications are subject to change without notice. This product may be subject to export All information included here is valid as of November 2010.
regulations. All other trademarks are the property of their respective trademark owners. Projection images simulated. DLP, DLP logo and DLP PT-DZ570U1 Printed in Japan.
Medallion logo are trademarks or registered trademarks of Texas Instruments. © 2010 Panasonic Corporation. All rights reserved.